Clint Allardice’s Post

Quickly, safely and efficiently clean your moulds while improving OEE operational efficiencies. Dry ice blasting is non-abrasive, does not produce secondary waste and allows you to clean your moulds in the press, at operating temperatures. This leads to improved productivity, higher quality parts and reduced costs. The process can clean any type of mould and a variety of mould finishes up to and including A1 surfaces and textured surfaces. BENEFITS OF DRY ICE BLASTING Cut costs, increase production efficiency and improve product quality Dry ice blasting not only cleans your moulds more effectively but also leads to an increase in OEE operational efficiencies. Cold Jet’s dry ice blasting systems have helped packaging moulders meet stringent productivity demands. Our systems help moulders clean faster, better and more economically, increasing production capacity and improving product quality. Mould cleaning times can be reduced up to 75% with Cold Jet. Dry ice cleaning technology allows moulds, lock rings, cores and gate inserts to be cleaned without the disassembly of the stripper plate and while the mould is still in the press. The system also cleans blow moulding machines, pelletizing equipment, conveyor belts and glue machines. Clean mould cavities and vents are a major concern for plastic part manufacturers in maintaining today’s high-quality standards. The build-up of unwanted surface residue from either the product mix itself, mould releases or the labelling process can create various problems, ranging from product release (“knock out”) to inferior product quality and possible tool damage. Flash on the product also creates challenges for manufacturers. Mould halves leave a parting line in the final product, and that parting line, or flash, must be removed for product quality. #ColdJetAustralia #DryIceBlasting

𝐇𝐨𝐰 𝐝𝐨 𝐲𝐨𝐮 𝐫𝐞𝐦𝐨𝐯𝐞 𝐚𝐬𝐩𝐡𝐚𝐥𝐭 𝐟𝐫𝐨𝐦 𝐩𝐚𝐯𝐢𝐧𝐠 𝐞𝐪𝐮𝐢𝐩𝐦𝐞𝐧𝐭 𝐚𝐧𝐝 𝐭𝐫𝐮𝐜𝐤𝐬? 𝘿𝙧𝙮 𝙞𝙘𝙚 𝙗𝙡𝙖𝙨𝙩𝙞𝙣𝙜 𝙞𝙨 𝙩𝙝𝙚 𝙛𝙖𝙨𝙩𝙚𝙨𝙩 𝙖𝙣𝙙 𝙘𝙝𝙚𝙖𝙥𝙚𝙨𝙩 𝙬𝙖𝙮 𝙩𝙤 𝙨𝙖𝙛𝙚𝙡𝙮 𝙧𝙚𝙢𝙤𝙫𝙚 𝙖𝙨𝙥𝙝𝙖𝙡𝙩. “Dry ice blasting is definitely the best option for cleaning asphalt off of equipment. It’s faster, more efficient and is a safer alternative. It’s also non-abrasive and there’s no water or harsh chemicals mixing in with their asphalt.” - Wes Donaldson of Go Green Dry Ice Blasting Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #AsphaltRemoval #DryIceBlasting #ColdJetAustralia

Dry ice blasting is an effective solution to remove burrs and flash from machined and molded parts. Dry ice is non-abrasive and does not create secondary waste, which ensures the geometries of the finished part are maintained without leaving residual media. Cold Jet’s Automated Environmental Cleaning and Surface Preparation (ECaSP) systems were developed to improve quality and lower operating costs for manufacturers with parts that have flash or burrs. Our automated systems eliminate the need for manual deflashing or deburring, thus improving part quality, increasing productivity and lowering cost. Our systems can safely remove flash and burrs from a variety of materials: PEEK, PBT, Acetal, Nylon, LCP, ABS, UHMWPE, Nitinol, etc. without causing part surface damage. Dry ice cleaning eliminates manual deburring and deflashing processes, leading to higher quality finished parts in a fraction of the time. Traditional cleaning methods are time-consuming and tedious, not to mention ineffective for complete removal. Dry ice cleaning is up to three times faster than traditional methods!!!. #MedicalIndustry #DryIceBlasting #ColdJetAustralia

The Maclean project, financed through the European Commission’s Life programme, will enable Safran Helicopter Engines to study and then industrialise alternate methods of cleaning engine parts during the MRO process. When a helicopter engine is sent to a MRO (Maintenance, Repair and Overhaul) shop, its parts need to be intensively cleaned to remove any oil, calamine, coking so that they can be inspected. One disadvantage of the current process: the cleaning process is long and requires chemical products. The cleaning agents needs to then be recycled and treated, just like the water used to rinse the parts after cleaning. The objective of the project is to develop and industrialise two cleaning processes that bring together efficiency and environment: cryogenics and laser. Cleaning with Cold Jet Dry Ice Blasting in a Fire Restoration Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #EnginePartsMaintenance #DryIceBlasting #ColdJetAustralia

The insurance carrier had bids coming in to replace the metal walls and roof that couldn't be cleaned on this huge barn. Of course, we knew it could be cleaned and were able to clean the whole space in six big days. The adjuster told us we saved them $600,000 and six months on this single project! A fire can cause soot and smoke damage to metal, brick and concrete and charring to wood. This type of damage is unsightly and holds odor. Traditionally, the removal method has been sanding, scraping and wire brushing. With Cold Jet, this long and tedious process can be eliminated. Cold Jet dry ice blasting has become the preferred method to remove smoke soot, vaporized synthetic resins and char. It has even been known to reduce or eliminate the musty burnt smell that results from fire, smoke and water damage. Cold Jet dry ice blasting provides a fast and efficient removal of smoke damage even in the tight angles of trusses, around nails, wiring and all plumbing without damage to the surface integrity. Traditional cleaning methods are time consuming and tedious, not to mention ineffective for complete removal. Dry ice cleaning is up to three times faster than traditional methods!!!. Cleaning with Cold Jet Dry Ice Blasting in a Fire Restoration Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #FireRestoration #DryIceBlasting #ColdJetAustralia

A fire can cause soot and smoke damage to metal, brick and concrete and charring to wood. This type of damage is unsightly and holds odor. Traditionally, the removal method has been sanding, scraping and wire brushing. With Cold Jet, this long and tedious process can be eliminated. Cold Jet dry ice blasting has become the preferred method to remove smoke soot, vaporized synthetic resins and char. It has even been known to reduce or eliminate the musty burnt smell that results from fire, smoke and water damage. Cold Jet dry ice blasting provides a fast and efficient removal of smoke damage even in the tight angles of trusses, around nails, wiring and all plumbing without damage to the surface integrity. Cleaning with Cold Jet Dry Ice Blasting Technology Provides: Cleaning with Cold Jet Dry Ice Blasting in The Food Industry Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #FireRestoration #DryIceBlasting #ColdJetAustralia

𝐖𝐞 𝐤𝐧𝐨𝐰 𝐭𝐡𝐚𝐭 𝐚 𝐟𝐨𝐨𝐝 𝐩𝐫𝐨𝐝𝐮𝐜𝐭𝐢𝐨𝐧 𝐩𝐥𝐚𝐧𝐭 𝐦𝐮𝐬𝐭 𝐛𝐞 𝐜𝐥𝐞𝐚𝐧 𝐚𝐧𝐝 𝐟𝐫𝐞𝐞 𝐨𝐟 𝐜𝐨𝐧𝐭𝐚𝐦𝐢𝐧𝐚𝐧𝐭𝐬. Only with dry ice blasting is it possible to achieve cleaning results never seen before, removing oils, sugars and fats in the fastest way. By implementing Cold Jet dry ice blasting into your cleaning routines, your cleaning time can be dropped to 15-20 minutes (depending on your application). In Addition, our technology will help you keep your processing equipment and food contact surfaces free of contaminants and all microbial life. Dry ice blasting is a verified decontamination method and resulted in logarithmic reductions in microorganism counts – proven when the facility performed a microbial swab test. Cutting cleaning time by a significant amount enabling companies to quickly improve production rates. Cleaning with Cold Jet Dry Ice Blasting in The Food Industry Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #FoodIndustry #DryIceBlasting #ColdJetAustralia #FoodProductionPlantMaintenance

Cold Jet on Modern Marvels. Dry ice cleaning is similar to sand, bead and soda blasting in that it prepares and cleans surfaces using a media accelerated in a pressurized air stream. It differs in that dry ice cleaning uses solid CO2 pellets or MicroParticles, which are blasted at supersonic speeds and sublimate on impact, lifting dirt and contaminants off the underlying substrate. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #ModernMarvels #DryIceBlasting #ColdJetAustralia

Dry ice cleaning is a dry process that eliminates the need for aqueous or chemical solutions on paint lines. Dry ice cleaning prepares and cleans surfaces without creating secondary waste, which enables for immediate painting or coating, repair and non-destructive testing. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #PaintCoating #ColdJetAustralia #DryIceBlasting

TESTIMONIAL 𝐅𝐞𝐫𝐫𝐚𝐫𝐢 𝐝𝐞𝐭𝐚𝐢𝐥𝐢𝐧𝐠 𝐰𝐢𝐭𝐡 𝐄𝐚𝐬𝐭𝐬𝐢𝐝𝐞 𝐀𝐮𝐭𝐨 𝐒𝐩𝐚 - 𝐝𝐞𝐭𝐚𝐢𝐥𝐢𝐧𝐠 𝐚 𝟐𝟎𝟎𝟐 𝐅𝐞𝐫𝐫𝐚𝐫𝐢 𝟑𝟔𝟎 𝐒𝐩𝐢𝐝𝐞𝐫. Using dry ice blasting technology to clean vintage, rare, and collectible cars offers precision cleaning with no abrasion, chemicals, or liquids. Whether you're preparing a vehicle for sale, concourse, or private collection, the techniques we employ save time, money, and offer the very highest level of clean available, without damage... and often without disassembly. In this video you will understand why virtually every person says after watching: "That's incredible!" or "How is that possible?" This is the next revolution in the automotive space and it's still very early! Traditional cleaning methods are time-consuming and tedious, not to mention ineffective for complete removal. Dry ice cleaning is up to three times faster than traditional methods!!!. Cleaning with Cold Jet Dry Ice Blasting Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean ❄️𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #ColdJetAustralia #CarDetailing #CarMaintenance #AutoSpa #DryIceBlasting