Obeo’s Post

IPETRONIK's IPEmotion 2013: Name and functions got updated throughout all Editions

Who hasn’t been tempted to assign too many priorities in their first FreeRTOS project, only to end up with seemingly random behavior? At least I have! But mastering task priorities is key to unlocking the full potential of FreeRTOS. This insightful series, written by Thierry Durand, is packed with practical tips and strategies to help you design your system with confidence. If you're eager to get it right from the start, these articles are a must-read! #FreeRTOS #EmbeddedSystems #RTOS #RealTimeOperatingSystem #EmbeddedDevelopment

"Data is with a unified namespace, commoditized. It's easily accessible for users, for use cases; and with the unified namespace, you decouple applications because data is singular, but applications are theoretically replaceable.” - Alexander Krüger In the recent Augmented Ops Podcast hosted by Natan Linder, CEO of Tulip Interfaces, Alex discussed key topics including the benefits of adopting a Unified Namespace over the traditional ISA-95 architecture, the role of open-source technologies like Node-Red, the disruption of monolithic applications by microservice-based MES solutions, and much more! Tune in here to listen to the episode: https://lnkd.in/ecKzF52y ------ 📝 Our latest article on the United Namespace: https://lnkd.in/eEkSxYEw 📚 Visit UMH Learning Center: https://learn.umh.app/ #unifiednamespace #unitedmanufacturinghub #iiot #industry40 #smartmanufacturing #nodered

Today we published a paper on experiences from working with #cyberphysicalsystems in #industryacademiacollaboration in the very nice Wiley Software: Practice and Experience journal. 🍾🌟🎓 In the paper we cover experiences in the AIDOaRt research project. We present five challenging areas (#data, #modeling, #requirementsengineering, continuous software and system engineering, as well as intelligence and automation). We highlight practical experience in collaboration from the project via the Westermo Network Technologies and Volvo Construction Equipment cases. My favorite part is Table 1 with #lessonslearned. Based on previous research and our experiences we recommend: joint problem formulation, joint work on solution, and to plan for continued work past the project. Authors are: Johan Cederbladh, Romina Eramo, Vittoriano Muttillo and me. DOI-link: https://lnkd.in/dngChFdD

Happy to see our article on collaboration from experiences in the AIDOaRt finally published! Over the last few weeks I have also gotten 4 conference papers accepted: Towards Automating Model-Based Systems Engineering in Industry - An Experience Report at Syscon 2024. In this paper we report on the unified solution approach in the Volvo Construction Equipment use case in the AIDOaRt project to integrate AI, Modeling, and DevOps for system architecture definition and analysis leveraging various standards and partner solutions. Authors: Johan Cederbladh, Luca Berardinelli, Damir Bilic, Hugo Bruneliere, Antonio Cicchetti, MohammadHadi Dehghani, Claudio Di Sipio, James Miranda, Abbas Rahimi, Riccardo Rubei Correlating Logical and Physical Models for Early Performance Validation - An Experience Report also at Syscon 2024. In this paper we demonstrate an approach for how logical (e.g. SysML) and physical models (e.g, Modelica) typically found in MBSE can be tied together by bridging their abstraction gap to utilize various simulation approaches. We also provide guidelines for how others might implement similar setups in their tool environments. Authors: Johan Cederbladh, Marcel Gottschall, Jagadish Suryadevara, Khaled Alekeish Towards Adopting a Digital Twin Framework (ISO 23247) for Battery Systems at ITNG 2024 In this paper we reason about how a digital twin framework can be applied for complex battery systems by leveraging the ISO 23247 standard. We demonstrate through the use case of heterogeneous battery systems. Authors: Johan Cederbladh, Enxhi Ferko, Emil Lundin Towards Formalizing a Systems of Systems Core Ontology for Capability Configuration, a SysML Approach at CSER 2024 In this paper we make a first attempt at extending an ontology created by Joyce Martin for missions and capabilities in Systems of Systems, and leverage the SysML language to formalize the ontological concepts. Authors: Joyce Martin, Johan Cederbladh Hope to see some of you at the upcoming conferences and that I can keep up these great collaborations, and perhaps some new ;) If you are interested in the papers you can reach out.

Excellent overview showing how modelling covers these various areas.

A Simple Convolution Process (without using built in convolution function)

Optimization of Nonlinear Functions via Piecewise Linearization - Tim Forster - https://lnkd.in/e74Xtm7u

🔍 DeepEX Software FAQs: You Asked, We Replied! 🤔 FAQ: Is DeepEX a finite element analysis software? Curious about more features or have another burning question? Drop it in the comments, and let's keep the DeepEX conversation alive! 💬 #DeepEX #GeotechnicalEngineering #DeepExcavation

💻 LEONARDO 5 💻 : the new version of the #PRIMO dedicated software is out! 📽 Watch the teaser on YTB: https://lnkd.in/ezMpSDYD ✨ What's new ✨ ? ✨ A module for each experiment's type: EM grids micropatterning, multiwell plates micropatterning, hydrogel structuration, microfabrication ... ✨ A more user-friendly interface ✨ User sessions to save your experimental parameters ✨ New report format ✨ And many new functionalities ... 🔝 Ask for an upgrade at: https://lnkd.in/e-G_qY5v