Stagepas 300 SM C
Stagepas 300 SM C
SERVICE MANUAL
Speaker
Mixer
Speaker
CONTENTS SPECIFICATIONS ............................................... 3 PANEL LAYOUT .................................. 4 DIMENSIONS ......................................................... 4 CIRCUIT BOARD LAYOUT .............. 5 DISASSEMBLY PROCEDURE ........................... 6 IC BLOCK DIAGRAMIC ................................. 15 CIRCUIT BOARDS ..................................... 16 INSPECTIONS ......................................................... 23 TROUBLE SHOOTING ............ 26 PARTS LIST BLOCK DIAGRAM CIRCUIT DIAGRAM
PA 011775
20050321-86100 HAMAMATSU, JAPAN
Copyright (c) Yamaha Corporation. All rights reserved. PDF-K9611 05.04
STAGEPAS 300
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and have therefore not been restated.
WARNING :
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the appointed service representative. This presentation or sale of this manual to any individual or firm does not constitute authorization certification, recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.
IMPORTANT :
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division.
WARNING : IMPORTANT :
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.) Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-and-YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. (3 wires)
WARNING
Components having special characteristics are marked originally installed. and must be replaced with parts having specification equal to those
STAGEPAS 300
SPECIFICATIONS
150 W+150 W/6 @10 % THD at 1 kHz (SPEAKER L/R) 100 W+100 W/6 @1 % THD at 1 kHz (SPEAKER L/R)
Frequency Response
-3 dB, 0 dB, +1 dB @20 Hz20 kHz, 1 W Output/6 (Without MUSIC/SPEECH, EQ and SP EQ Circuit) (SPEAKER L/R) -3 dB, 0 dB, +1 dB @20 Hz20 kHz, +4 dBu 10 k Load [MUSIC/SPEECH]switch=MUSIC (MONITOR OUT, REC OUT)
-3 dB, 0 dB, +1 dB @20 Hz20 kHz, 1 W /6 (MUSIC/SPEECH, EQ and SP EQ Circuit ) (SPEAKER L/R) -3 dB, 0 dB, +1 dB @20 Hz20 kHz, +4 dBu 10 k Load [MUSIC/SPEECH]=MUSIC (MONITOR OUT, REC OUT)
1 % @1 kHz, 50W Output Power (SPEAKER L/R) 0.5 % @20 Hz20 kHz, +14 dBu 10 k (MONITOR OUT, REC OUT)
Crosstalk (1 kHz)
-70 dB between input channels
(1 kHz)
-70 dB
Weight
18 kg (mixer and two speakers)
18 kg (2)
Power Consumption
70 W
70 W
Accessories
Power Cable, Speaker Cable, Owners Manual
Option
Microphone
Speaker Enclosure
Bass-reflex type
Speaker Unit
LF: 8" (20 cm) Cone HF: 1" (2.54 cm) Compression Driver
4 kHz
55 Hz20 kHz
Frequency Range
55 Hz20 kHz
112 dB (1 m)
STAGEPAS 300
PANEL LAYOUT
u o !0
q [POWER] switch ([POWER]) w [AC IN] jack ([AC IN]) e [SPEAKER L/R] jacks ([SPEAKER L/R]()) r [REC OUT L/R] jacks ([REC OUT L/R]) t [MONITOR OUT L(MONO)/R] jacks ([MONITOR OUT L(MONO)/R]) y Channel input jacks (CH 1 to 4) ( (CH 14)) u Stereo channel input jacks (CH 5/6, 7/8) ((CH 5/6 7/8)) i [MIC/LINE] switches ([MIC/LINE]) o Equalizer [HIGH]/[LOW] (EQ()) !0 [REVERB] switches ([REVERB]) !1 [REVERB] control ([REVERB]) !2 [LEVEL] control ([LEVEL]) !3 [MASTER LEVEL] control ([MASTER LEVEL]) !4 [SPEECH/MUSIC] switch ([SPEECH/MUSIC]) !5 [MONITOR OUT] control ([MONITOR OUT]) !6 [LEVEL] meter ([LEVEL]) !7 [POWER] indicator ([POWER])
y i !5 !1 !4 !7 !3
!2
t r e
q !6
DIMENSIONS
Speaker Mixer
MSC
1
160
455.5
MSC
2
1 3
MSC
96.3 275
137
255
120 2-M8x25
Unit: mm
290
MSC
1 2
1 3
NETWORK1 NETWORK1
or
or
NETWORK2 NETWORK2
INPUT VR VR FILTER
JACK2
JACK1A
or
JACK1B
STAGEPAS 300
STAGEPAS 300
IC BLOCK DIAGRAMIC
CC2 7
OP2 IN 12
OP2 OUT 11
LPF2 IN 10
LPF2 OUT 9
OSCILLATOR
D/A
LPF2
1/2 Vcc CLOCK AUTO RESET RESET D1 DO1 MAIN CONTROL DO0
MO MI 20Kbit SRAM
A/D
5 OP1 IN
6 CC1
8 GND
15 Vcc
LB1407-E LF (AAX68710)
AC/DC Voltage Level Meter VR: IC604
12, 11, 10, 9 Vref Vcc Rch 3 Vcc Rch Vref IN+ IN-OUT GND
1 2 3 4 5 6 7 14 13 12 11 10 9 8
D7 14
D6 13
D1 8
D7
R7 R6 4.12 k -COM 7 + COM 6 -+ COM 1 R1 1 k
D6 D5 D4 D3 D2 D1 IN + IN -4 5
-+
5.83 k
6 OUT
7 GND
DRAIN (D)
1 3 2 5 7 4
+
5.8 V 4.8 V INTERNAL UV COMPARATOR
+
IFB CURRENT LIMIT ADJUST
SOFT START
5.8 V VI (LIMIT)
+ + -
+
CURRENT LIMIT COMPARATOR
FREQUENCY (F) 5
+
PWM COMPARATOR
S Q R
RE
SOURCE (S)
15
STAGEPAS 300
INSPECTIONS
1. Test Conditions
Measuring Voitage: AC 100 V 50/60 Hz (J) AC 120 V 60 Hz (U, C, V) AC 240 V 50 Hz (A) AC 230 V 50 Hz (B, H, W) AC 220 V 60 Hz (K) AC 220 V 50 Hz (O) Load: 6 Input: 1 KHz MASTER LEVEL VR VR: MAX. Tone-control VR VR: HIGH, LOW = All channel Center. REVERB SW SW: All channel OFF. REVERB level VR: MIN. SPEECH/MUSIC SW / SW: MUSIC USE MEASUREMENT FILTER: DIN-Audio
NOTE: q Use a low pass filter (20 KHz) to measure noise at the SP jack (SP OUT). SP SP OUT20 KHz w The sleeve of the SP OUT Lch is the hot terminal. So, pay attention not to let it contact GND. SP OUT Lch Sleeve Tip
2.
No.
Electric Characteristic
INPUT CONDITIONS INPUT1-SW=LINE INPUT1-LEVEL=MAX. INPUT1-SW=LINE INPUT1-LEVEL=MAX. INPUT1-SW=LINE INPUT1-LEVEL=MAX. OUTPUT CONDITIONS SP OUT: L, R 1 %THD OUTPUT 1 % SP OUT: L, R 50 W OUTPUT 50 W MONITOR OUT: L, R +14 dBu OUTPUT (Load: 10 k) NOMINAL 112 W LIMIT >100 W
0.5 %
<1 %
0.1 %
<0.2 %
23
STAGEPAS 300
No.
INPUT 1, 2, 3, 4 (Each) INPUT=XLR INPUT-SW=MIC INPUT-LEVEL=MAX. INPUT 1, 2, 3, 4 (Each) L INPUT=PHONE INPUT-SW=LINE INPUT-LEVEL=MAX. INPUT 5 and 6, 7 and 8 L (Each pair) INPUT=PHONE, RCA INPUT-LEVEL=MAX. 4 FREQUENCY INPUT: 60 Hz SP OUT: L, R RESPONSE 1, 2, 3, 4 (Each) REF: 1 W OUTPUT INPUT=XLR : 1 W INPUT-SW=LINE 10 KHz INPUT-LEVEL=MAX. INPUT: 60 Hz SP OUT: L, R 5 and 6, 7 and 8 REF: 1 W OUTPUT (Each pair) : 1 W INPUT=PHONE, RCA 10 KHz INPUT-LEVEL=MAX. 5 TONE-CONTROL INPUT 1, 2, 3, 4, 5, 6, 7, 8 REF: 300 mV RECOUT CHARACTERISTIC (Each) : 300 mV RECOUT LOW=MIN. (Load: 10 k) REF: 30 Hz, LOW VR CENTER INPUT 1, 2, 3, 4, 5, 6, 7, 8 (Each) LOW=MAX. REF: 30 Hz, LOW VR CENTER INPUT 1, 2, 3, 4, 5, 6, 7, 8 (Each) HIGH=MIN. REF: 30 KHz, HIGH VR CENTER INPUT 1, 2, 3, 4, 5, 6, 7, 8 (Each) HIGH=MAX. REF: 30 KHz, HIGH VR CENTER INPUT1 HIGH, LOW VR CENTER SPEECH/MUSIC=SPEECH REF: 80 Hz, MUSIC MODE
OUTPUT CONDITIONS SP OUT: L, R REF: 100 W OUTPUT MONITOR OUT: L +4 dBu OUTPUT (Load: 10 k) REC OUT: L, R -8 dBu OUTPUT (Load: 10 k) MONITOR OUT: L +4 dBu OUTPUT (Load: 10 k)
-31 dBu
-31 dBu3 dB
-61 dBu
-61 dBu3 dB
-21 dBu
-21 dBu3 dB
-21 dBu
-21 dBu3 dB
+4.0 dB
+4.02 dB
0 dB +4.0 dB
02 dB +4.02 dB
0 dB -15.0 dB
02 dB -15.02 dB
+15.0 dB
+15.02 dB
-15.0 dB
-15.02 dB
+15.0 dB
+15.02 dB
-3.0 dB
-3.02 dB
24
STAGEPAS 300
No.
INPUT CONDITIONS INPUT 1, 2, 3, 4, 5, 6, 7, 8 to Adjacent INPUT CH INPUT SHORT MASTER-LEVEL=MIN. SW-MIC INPUT=XLR INPUT IMPEDANCE=150 INPUT1
OUTPUT CONDITIONS SP OUT: REF: 100 W OUTPUT : 100 W SP OUT: SP OUT REF: 100 W OUTPUT MONITOR : 100 W OUT SP OUT SP OUT (MEASURE WITH 20 kHz LPF) SP OUT: REF: LEVEL METER=0 LEVEL METER0 SP OUT: REF: 12.5 W OUTPUT
NOMINAL 75 dB
LIMIT >70 dB
69 W
<75 W
3.
4.
Limiter Indication
The product shall be set to 31 dBu output on SP OUT. Then, LIMITER LED(RED) should light on and all LEDs of LEVEL meter should light on. SP OUT 31 dBu LIMITER LED LEVEL LED
25
STAGEPAS 300
TROUBLE SHOOTING
Points marked by A to L in the figure of circuit board are the points to be checked as indicated by the same marks in the flowchart on the next page or after. A L
D , E , F
B ,C ,G
J K L I
A Component side
Pattern side 26
STAGEPAS 300
F1 (Fuse) OPEN ? No
Yes
CN4: 7 pin +VB = +38 V (DC) ? Yes CN4: 5 pin -VB = -38 V (DC) ? Yes
No
No
No
No
No
[ With Load ]
No
No
27
STAGEPAS 300
< Power LED > < Signal Path > < FAN >
No
Replace the Power Amplifier Unit. Q817:ON No L Q817: Base = 0 V ? Q817:OFF Yes
END
28