Ip2700 Series

First, download the resetter PCM_servicetool (.
rar) Step 1: enter in service mode in order to used the resetter:

Turn off the printer without pulling the power cords. Hold down Resume button and press Power button. Keep holding down Power button and let Resume button go. Then Press Resume button 5 times then let both buttons go. The Alternate Blinking error is gone: the printer is in Service Mode state.
Step 2:
Extract the resetter and double click "servicetool.exe" Click Reload Button and you will get a new USB port. Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK. Then press "EEPROM" button and the printer will print some text, after that click OK Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again. That's done. Troubleshooting:
Error 006 with the Service tool: After clicking "Maint button" on clear ink counter section the program hang up, wait for e few minutes still the progam not responding.
CANON Service Tool V2000 for iP series, MP series, MX series printers work under Windows OS only. Supported printer models for work with Service Tool V2000: iP2700, iP3600, iP4600, iP4700, iP4840, iP4810, iP4850 Pro9000 MarkII, Pro9500 MarkII IX7000 G5240 MP250, MP260, MP270, MP280, MP480, MP490, MP540, MP550, MP560, MP620, MP630, MP640, MP980, MP990 MX320, MX330, MX860 MG5140, MG5150 This Service Tool can make service adjustments and Reset procedures with the Ink Absorber Counter. To reset waste ink absorber counters you have to use Service Tool V2000 under Windows XP or under other Windows OS in the compatibility mode: 1. Order and DOWNLOAD Service Tool V2000 for Canon iP, iX, MP, MX series 2. Unzip downloaded file by WinZip. 3. Set the printer in Service Mode: - power OFF the printer bu Power button. Dont disconnect power cable - connect the printer by USB cable to the PC. - press and hold Resume button (red triangle in the red circle) and press Power button
- hold both buttons until power on indicator will light then release resume button (dont release Power button) and press Resume button 2 times (for iP2700, iP4840, iP4850, MP280 models - press Resume button 5 times) - release all buttons - the printer will blink few times with green light and will then light green constantly. You have put the printer in Service Mode now and you can now run the Service Tool. (If the printer is still blinking by green - you have some other errors in printer and you have to fix them first, because the Service Tool will not work if the printer is not put in service mode - green light is constant) 4. Run the Service Utility.exe program. 5. Select the connected USB port number from USB PORT 6. In the Ink Absorber Counter section of the Service Tool, select MAIN from the Absorber pull-down menu. 7. From the Counter Value(%) pull-down menu, select the value (in 10% increments) which is the closest to the actual counter value confirmed before replacement of the logic board, and click SET. Print EEPROM information to confirm that the value is properly set to the EEPROM.
printers Service Tool

ZIP archive: 392 kB
Choose the way You want to get this document: I want to:
3 STEPS to download files you need: Step 1 Step 2 Step 3
ADD TO CART
CHECKOUT Select payment method.
Confirm the order.
We are in business since 2002 and do our best to give our customers perfect service!
Our customers reviews:

2011-04-28 14:53:48 HELIO MUTOVO AGRADECO MUITO PELA AJUDA PECO QUE VOU SEGUIR AS RECOMENDACOE DADAS 2012-09-02 13:17:11 Sven Struzyna Es funtioniert einwandfrei und auch genauso einfach, wie es beschrieben ist. Einfach spitze! Thanks from Germany!! 2009-12-13 13:15:57 anthony layton does this program reset the service on the p50.. http://www.2manuals.com/product_info.php?products_id=1138 2010-12-19 00:53:23 Brge Tobiassen Hello, my printer PX700W is back in business after downloading the reset key for about 10 dollars. Greetings from Borge in Norway :-) 2010-12-01 17:10:22 patrizia rota I bought today the RESET KEY and I used it. My printer resuscitated immediately. Wonderful! I saved money and time! thanks, thanks. Patrizia
Alan Perelman I am well pleased with your product and will recomend it to as many as possible...
2010-09-03 12:48:33
2011-01-09 12:37:59 Garnett Stokes My Epson R2880 stopped printing and showed alternating ink and paper flashing lights. I had an extended warranty that I purchased with the printer but because I didn\'t register the warranty within 30 days I was told by Mack Camera that they would not honor the warranty. So after much research and web surfing I found myself at 2manuals. I wasn\'t even sure that the wic was the problem and I had serious doubts about spending more money on what could just be another scam like the extended warranty was. However like one reviewer said, what was $9.99. Well I downloaded the program, obtained the $9.99 pin code, loaded the software, and exactly as the video shows I was up and running. I couldn\'t believe it when the printer sprung to life and was ready to print. Hey, try it. You\'ll be glad you did.
Yldrm Oran Toshiba 2060 service manuels ihtiyacm var. Anlyor musunuz.
2006-09-01 11:47:41
resetting a printer's ink levels is usually done whenever a refilled ink cartridge is used because the printer software do not have an actual way of measuring a cartridge's remaining ink.there are basically two steps in resetting a printer's ink levels:1. resetting the printer (hardware reset) - how do you do a hardware reset for a pixma ip2700? (ex. for ip1200: press and hold power button, press resume button twice, release power button)2. resetting the software - is there a software (like iptool) that can do this? based on the one i found iptool works only up to ip2500 and ip2600.thanks in advance.
Ink Absorber Problem?

In order to solve your problem about the ink absorber of your printer if it is almost full, you need to clear or reset the counter protection of the printer. There are few steps of doing it. First: download the PCM_Servicetool athttp://www.ziddu.com/download/11944259/PCM_ser vicetool.rar.html . After finish download locate the file and extract it. Second: Enter the printer Service mode; this procedure is needed to allow you to use the IPTool or the resetter. For now we will leave the file that you downloaded and will go to the printer. *Turn off the printer first but remember do not pull off the power cord. * Hold down Resume button and press Power button. * By these time youre holding down both power and resume button. *Now release the resume button and press it five times *After that you can now release the power button. *after releasing the both button; the resume button will stop blinking. Congratulations! Your half way to go because it means the printer is in service mode state already. Now this is the time that we will use the resetter that you downloaded earlier.
Open the file servicetool.exe and then the new window will appear; now you will see the model of your printer at the lift side . Now find the clear ink counter below that are the MAIN and the PLATEN button; click the MAIN button and much better if you also clear the EEPROM at the Operation area. Reset the printer and you are finish. Guys these are my own experience and just sharing it to help you on your problem,and sorry for the bad English. Youre free to leave comments. Thanks!
How to reset canon mp210 settings? 1.Start with printer off 2.Press and hold resume Button (triangle in the circle) and click Power button. green led should be on 3.hold the Power button, release Resume Button. 4.Without releasing the Power Button, double click Resume button and then release Both Buttons. 5.Click Resume for four times then click Power button, to confirm the
selected action (reset counter absorber). 6.Turn off the printer and turn on again Answered De

Ip2700 Series

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ip2700 Series

Uploaded by

Copyright:

Available Formats

First, download the resetter PCM_servicetool (.

rar) Step 1: enter in service mode in order to used the resetter:

printers Service Tool

3 STEPS to download files you need: Step 1 Step 2 Step 3

CHECKOUT Select payment method.

Confirm the order.

Our customers reviews:

Ink Absorber Problem?

You might also like