Professional Documents
Culture Documents
MIS Audit Checklist
MIS Audit Checklist
No.
A
Description
ORGANISATION AND ADMINISTRATION
Yes
No N/A
Audit Objective Does the organization of data processing provide for adequate segregation of duties? Audit Procedures Review the company organization chart, and the data processing department organization chart. Is there a separate EDP department within the company? Is there a steering committee where the duties and responsibilities for managing MIS are clearly defined? Has the company developed an IT strategy linked with the long and medium term plans? Is the EDP Department independent of the user department and in particular the accounting department? Are there written job descriptions for all jobs within EDP department and these job descriptions are communicated to designated employees? Are EDP personnel prohibited from having incompatible responsibilities or duties in user departments and vice versa? Are there written specifications for all jobs in the EDP Department? Are the following functions within the EDP Department performed by separate sections: System design? Application programming? Computer operations? Database administration? Systems programming?
1 2
3 4
6 7 8
Data entry and control? Are the data processing personnel prohibited from duties relating to: Initiating transactions? Recording of transactions? (2/20)
10 11 12 13 14 15 16 17 18 19
Are all processing pre-scheduled and authorized by appropriate personnel? Are there procedures to evaluate and establish who has access to the data in the database? Are the EDP personnel adequately trained? Are systems analysts programmers denied access to the computer room and limited in their operation of the computer? Are operators barred from making changes to programs and from creating or amending data before, during, or after processing? Is the custody of assets restricted to personnel outside the EDP department? Is strategic data processing plan developed by the company for the achievement of long-term business plan? Are there any key personnel within IT department whose absence can leave the company within limited expertise? Are there any key personnel who are being over-relied? Is EDP audit being carried by internal audit or an external consultant to ensure compliance of policies and controls established by management? PROGRAM MAINTENANCE AND SYSTEM DEVELOPMENT Audit Objective Development and changes to programs are authorized, tested, and approved, prior to being placed in production. Program Maintenance Audit - Procedures Review details of the program library structure, and note controls which allow only authorized individuals to access each library. Note the procedures used to amend programs. Obtain an understanding of any program library management software used. (3/20)
1 2 3 4 5 6 7 8 9 10 11 12
Are there written standards for program maintenance? Are these standards adhered to and enforced? Are these standards reviewed regularly and approved? Are there procedures to ensure that all programs required for maintenance are kept in a separate program test library? Are programmers denied access to all libraries other than the test library? Are changes to programs initiated by written request from user department and approved? Are changes initiated by Data Processing Department communicated to users and approved by them? Are there adequate controls over the transfer of programs from production into the programmer's test library? Are all systems developed or changes to existing system tested according to user approved test plans and standards? Are tests performed for system acceptance and test data documented? Are transfers from the development library to the production library carried out by persons independent of the programmers? Do procedures ensure that no such transfer can take place without the change having been properly tested and approved? Is a report of program transfers into production reviewed on a daily basis by a senior official to ensure only authorized transfers have been made? Are all program changes properly documented? Are all changed programs immediately backed up? Is a copy of the previous version of the program retained (for use in the event of problems arising with the amended version)? Are there standards for emergency changes to be made to application programs? Are there adequate controls over program recompilation? Are all major amendments notified to Internal audit for comment? Are there adequate controls over authorization, implementation, approval and documentation of changes to operating systems? (4/20)
13 14 15 16 17 18 19 20
SYSTEM DEVELOPMENT Are there formalized standards for system development life cycle procedure? Do they require authorization at the various stages of development feasibility study, system specification, testing, parallel running, post implementation review, etc.? Do the standards provide a framework for the development of controlled applications? Are standards regularly reviewed and updated? Do the adequate system documentation exist for:
6 7 8 9 10 11 12 13 14
3 4 5
Programmers to maintain and modify programs? Users to satisfactorily operate the system?
Have the internal audit department been involved in the design stage to ensure adequate controls exist? Testing of programs - see Program Maintenance. Procedures for authorizing new applications to production - see Program Maintenance. Are user and data processing personnel adequately trained to use the new applications? Is system implementation properly planned and implemented by either parallel run or pilot run? Are any differences and deficiencies during the implementation phase noted and properly resolved? Are there adequate controls over the setting up of the standing data and opening balances? Is a post implementation review carried out? Are user manuals prepared for all new systems developed and revised for subsequent changes? Is there a Quality Assurance Function to verify the integrity and acceptance of applications developed? PURCHASED SOFTWARE (5/20)
15 D
1 2 3 4 5
Are there procedures addressing controls over selection, testing and acceptance of packaged softwares? Is adequate documentation maintained for all softwares purchased? Are vendor warranties (if any) still in force? Is the software purchased, held in escrow? Are backup copies of user/operations manual kept off-site? ACCESS TO DATA FILES Audit Objective Is access to data files restricted to authorized users and programs? Access to Data Is there any formal written data security policy? Consider whether the policy addresses data ownership, confidentiality of information, and use of password. Is the security policy communicated to individuals in the organization? Is physical access to off-line data files controlled in: Computer room? On-site library? Off-site library?
2 3
4 5 6 7 8 9
Does the company employ a full-time librarian who is independent of the operators and programmers? Are libraries locked during the absence of the librarian? Are requests for on-line access to off line files approved? Are requests checked with the actual files issued and initialed by the librarian? Are sensitive applications e.g. payroll, maintained on machines in physically restricted areas? Are encryption techniques used to protect against unauthorized disclosure or undetected modification of sensitive data? (6/20)
10
Are returns followed up and non returns investigated and adequately documented? COMPUTER PROCESSING Does a scheduled system exist for the execution of programs? Are non-scheduled jobs approved prior to being run? Is the use of utility programs controlled (in particular those that can change executable code or data)? Are program tests restricted to copies of live files? Is access to computer room restricted to only authorized personnel? Are internal and external labels used on files? Are overrides of system checks by operators controlled? Are exception reports for such overrides pointed and reviewed by appropriate personnel? Are sufficient operating instructions exist covering procedures to be followed at operation? If so, are these independently reviewed? Is integrity checking programs run periodically for checking the accuracy and correctness of linkages between records? ACCESS CONTROLS Is there any proper password syntax in-force ie minimum 5 and maximum 8 characters and include alphanumeric characters? Are there satisfactory procedures for reissuing passwords to users who have forgotten theirs? Are procedures in place to ensure the compliance of removal of terminated employee passwords? Are system access compatibilities properly changed with regard to personnel status change? Are individual job responsibilities considered when granting users access privileges? (7/20)
F 1 2 3 4 5 6 7 8 9 10 11
2 3 4 5
6 7 8 9 10 11 12 13 14
Is each user allocated a unique password and user account? Are there procedures in place to ensure forced change of password after every 30 days? Is application level security violations logged? Do standards and procedures exist for follow up of security violations? Do formal and documented procedures exist for use and monitoring of dial up access facility? Is use made of passwords to restrict access to specific files? Do terminals automatically log off after a set period of time? Is there a limit of the number of invalid passwords before the terminal closes down? Are there any administrative regulations limiting physical access to terminals? Are invalid password attempts reported to user department managers? Are restrictions placed on which applications terminals can access? Are keys, locks, cards or other physical devises used to restrict access to only authorized user?
15
16 17
Audit Objective Do controls provide reasonable assurance that for each transaction type, input is authorized, complete and accurate, and that errors are promptly corrected? Are all transactions properly authorized before being processed by computers? Are all batches of transactions authorized?
1 2
(8/20)
3 4 5 6 7 8 9 10 11
Do controls ensure unauthorized batches or transactions are prevented from being accepted ie they are detected? Is significant standing data input verified against the master file? Is maximum use made of edit checking e.g. check digits, range and feasibility checks, limit tests, etc.? Are there procedures to ensure all vouchers have been processed e.g. batch totals, document counts, sequence reports, etc.? Are there procedures established to ensure that transactions or batches are not lost, duplicated or improperly changed? Are all errors reported for checking and correction? Are errors returned to the user department for correction? Do procedures ensure these are resubmitted for processing? Is an error log maintained and reviewed to identify recurring errors? Are persons responsible for data preparation and data entry independent of the output checking and balancing process? Are persons responsible for data entry prevented from amending master file data?
12
13
Audit Objective The controls provide reasonable assurance that transactions are properly processed by the computer and output (hard copy or other) is complete and accurate, and that calculated items have been accurately computed: Where output from one system is input to another, are run to run totals, or similar checks, used to ensure no data is lost or corrupted? Are there adequate controls over forms that have monetary value?
1 2
(9/20)
Is maximum use made of programmed checks on limits, ranges reasonableness, etc. and items that are detected reported for investigation? Where calculations can be 'forced' i.e. bypass a programmed check, are such items reported for investigation? Where errors in processing are detected, is there a formal procedure for reporting and investigation? Is reconciliation between input, output and brought forward figures carried out and differences investigated? Are suspense accounts checked and cleared on a timely basis? Are key exception reports reviewed and acted upon on a timely basis? VIRUSES Is there any formal written anti-virus policy? Is the policy effectively communicated to individuals in the organization? Is there a list of approved software and suppliers? Is only authorized software installed on microcomputers? Is there a master library of such software? Are directories periodically reviewed for suspicious files? Are files on the system regularly checked for size changes? Is anti-virus software installed on all microcomputers/laptops? Is anti-virus software regularly updated for new virus definitions? Are suspicious files quarantined and deleted from the terminals hard drive and network drive on regular basis? Are diskettes formatted before re-use? Have procedures been developed to restrict or oversee the transfer of data between machines? Is staff prohibited from sharing machines (laptops/desktops)? Is software reloaded from the master diskettes after machine maintenance? (10/20)
4 5 6 7 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15
Has all staff been advised of the virus prevention procedures? Are downloads from internet controlled by locking the hard-drive and routing it through network drive to prevent the virus (if any) from spreading? INTERNET Is there any proper policy regarding the use of internet by the employees? Does the policy identify the specific assets that the firewall is intended to protect and the objectives of that protection? Does the policy support the legitimate use and flow of data and information? Is information passing through firewall is properly monitored? Determine whether management approval of the policy has been sought and granted and the date of the most recent review of the policy by the management? Is the policy properly communicated to the users and awareness is maintained? Have the company employed a Firewall Administrator? Is firewall configured as per security policy? Is URL screening being performed by Firewall? Is anti-virus inspection enabled? Are packets screened for the presence of prohibited words? If so, determine how the list of words is administered and maintained. Are access logs regularly reviewed and any action is taken on questionable entries?
16
1 2 3 4
6 7 8 9 10 11
12
L.I
Check the safety against fire in the following ways: Building materials fire resistant? Wall and floor coverings non-combustible? Separation from hazardous areas (e.g. fire doors)? Separation from combustible materials (e.g. paper, fuel)? Smoking restriction? Fire resistant safes (for tapes, disks and documentation)?
Check the appropriate arrangements of fire detection devices: Smoke/ Heat-rise detectors? Detectors located on ceiling and under floor? Detectors located in all key EDP areas? Linked to fire alarm system?
Check the appropriate arrangements for fire fighting: Halon gas system (for key EDP areas) Automatic sprinkler system Portable CO2, extinguishers (electrical fires) Ease of access for fire services
Check appropriate arrangements in case of fire emergency: Fire instructions clearly posted Fire alarm buttons clearly visible Emergency power-off procedures posted Evacuation plan, with assignment of roles and responsibilities
Check if there is training to avoid fire emergecny: Regular fire drill and training Regular inspection/testing of all computing equipment
L.II
L.III
Heat, fire and access protection of sensitive air-conditioning parts (eg. cooling tower) Air intakes located to avoid undesirable pollution Back-up air conditioning equipment
Power Supply Reliable local power supply Separate computer power supply Line voltage monitored Power supply regulated (For voltage fluctuation) Uninterrupted power supply (eg. Battery system) available Alternative power supply (eg. Generator) Emergency lighting system
L.IV
Communications Network
Physical protection of communications lines modems, multiplexors and processors Location of communication equipment separate from main EDP equipment Back-up and dial-up lines for direct lines
L.V
Machine (Servers) Room Layout Printers, plotters located in separate area Printout preparation (eg. bursting) located in separate area Tape/Disk library in separate area Machine room kept tidy Practical location of security devices Emergency power off switches (13/20)
L.VI
Access Control Entrance Routes (EDP areas): No unnecessary entrances to the computer room Non-essential doors always shut and locked to the outside (eg, Fire exits) Air vent and daylight access location Protected and controlled use of all open doors
ACCESS CONTROL Access restricted to selected employees Prior approval required for all other employees Entrance door controlled by: Screening by a guard Locks/combinations Electronic badge/key Other - biological identification devices
1 2 3
4 5 6 7
Positive identification of all employees (eg. identification card) Verification of all items taken into and out of the computer room Access controlled on 24 hours basis including weekends (eg, automatic control mechanism) Locks, combinations, badge codes changed periodically Visitor Control (14/20)
M.I
1 2 3 4 M.II 1 2 3 4 5 6
Positive identification always required Badges issued, controlled and returned on departure All visits logged in and out Visitors accompanied and observed at all times Terminal Security All terminals located in secure areas Alarm system used to control microcomputers from being disconnected or moved from its location. Sensitive applications eg payroll, maintained on machines in physically restricted area. Terminal keys/locks used Passwords changed regularly Identification labels been placed on each terminal. General Security Waste regularly removed from EDP area and sensitive data shredded. Window and door alarm system. Closed circuit television monitoring ie CCTV cameras. PERSONNEL POLICIES MIS STAFF New employees recruited according to job description and job specification. Employee identity cards issued. Performance evaluation and regular counseling. Continuing education program. Training in security, privacy and recovery procedures. All functions covered by cross training. (15/20)
M.III
1 2 3 N
1 2 3 4 5 6
7 8 9 10 O
Critical jobs rotated periodically (e.g. operators, program maintenance). Clean desk policy enforced. Fidelity insurance for key personnel. Contract service personnel vetted (e.g. cleaners) INSURANCE Does adequate insurance exist to cover: Equipment? Software and documentation? Storage media? Replacement/ re-creation cost? Loss of data/assets (eg. Accounts receivable)? Business loss or interruption (business critical systems)?
Is adequate consideration given to cover additional cost of working and consequential losses?
BACK-UP PROCEDURES Equipment (computer and ancillary) Regular preventive maintenance Reliable manufacturer service Arrangements for back-up installation Formal written agreement Compatibility regularly checked Sufficient computer time available at back-up Testing at back-up regularly performed Outside Suppliers (non continuance/ disaster)
P.I 1 2 3 4 5
P.II
(16/20)
1 2
(eg, suppliers of equipment, computer time, software) Alternative sources of supply/ maintenance/ service available Adequate and secure documentation/ back-up of data and programs Are backup copies of system documentation kept in a secure location? Off-site Storage: Secure separate location Adequate physical protection. Log maintained of off-site materials Off- site Inventory regularly reviewed File transportation under adequate physical protection Back-up files periodically tested Data Files File criticality and retention procedure regularly reviewed Tape At least three generations of important tape files retained Copies of all updating transactions for above retained At least one generation and all necessary updating transactions in off-site storage Disc Checkpoint/restart procedures provided for Audit trail (log file) of transactions updating on-line files (data base) maintained Regular tape dumps of all disc files stored off-site (17/20)
3 P.III
1 2 3 4 5 P.IV 1 P.V
1 2 3
P.VI 1 2 3
4 P.VII
Audit trail (log file) regularly dumped and stored off-site Software Copies of following maintained at off-site storage: Production application programs Major programs under development System and program documentation Operating procedures Operation and system software All copies regularly updated Back-up copies regularly tested
P.VIII
Operations Back-up procedure manual Priority assignments for all applications Procedures for restoring data files and software Procedures for back-up installation
1 2 3
Is a comprehensive contingency plan developed, documented and periodically tested to ensure continuity in data processing services? Does the contingency plan provide for recovery and extended processing of critical applications in the event of catastrophic disaster? Has any Business Impact Analysis carried out by the company? Are all recovery plans approved and tested to ensure their adequacy in the event of disaster? Communicated to all management and personnel concerned (18/20)
3 4 5
6 7 8 9
Critical processing priorities identified (eg. Significant accounting applications) Are disaster recovery teams established to support disaster recovery plan? Are responsibilities of individuals within disaster recovery team defined and time allocated for completion of their task? Operations procedures for use of equipment and software backup Has the company developed and implemented adequate plan maintenance procedures? Are priorities set for the development of critical systems? Does a hardware maintenance contract exist with a reputable supplier? Does the recovery plan ensure, in the event of failure: No loss of data received but not processed No reprocessing of data already processed Files not corrupted by partially completed processing
10 11 12 13
14
(19/20)