Professional Documents
Culture Documents
Quality Assurance Management I To 12
Quality Assurance Management I To 12
AND MANAGEMENT
Edited by Mehmet Savsar
QUALITY ASSURANCE
AND MANAGEMENT
Edited by Mehmet Savsar
Contents
Preface IX
Chapter 1 Five Essential Skills for 21
st
Century
Quality Professionals in Health
and Human Service Organisations 1
Cathy Balding
Chapter 2 The Development and Changes
of Quality Control in Japan 19
Kozo Koura
Chapter 3 ISO-GUM and Supplements
are Utilized for QA of BCA Data 25
Yasuo Iwaki
Chapter 4 The Use of Quality Function
Deployment in the Implementation
of the Quality Management System 55
Elena Condrea, Anca Cristina Stanciu
and Kamer Ainur Aivaz
Chapter 5 Quality Assurance in Education 75
Geoffrey Doherty
Chapter 6 Challenges for Quality Management
in Higher Education Investigating Institutional
Leadership, Culture and Performance 103
P. Trivellas, P. Ipsilantis, I. Papadopoulos and D. Kantas
Chapter 7 Implementing Quality Management Systems
in Higher Education Institutions 129
Maria J. Rosa, Cludia S. Sarrico and Alberto Amaral
Chapter 8 Using a Class Questionnaire
for Quality Improvement of Engineering
Ethics Instruction During Higher Education 147
Yuji Okita
VI Contents
Chapter 9 Towards Learning-Focused Quality
Assurance in Chinese Higher Education 161
Yuan Li and Houyi Zhu
Chapter 10 Quality Assurance in Chiles Municipal Schools:
Facing the Challenge of Assuring and Improving
Quality in Low Performing Schools 183
Luis Ahumada, Carmen Montecinos and Alvaro Gonzlez
Chapter 11 Integrated Higher Education Management:
Summary of Management Approaches 193
Juha Kettunen
Chapter 12 Quality Assurance in the Career of Nursing 209
Cecilia Latrach, Naldy Febr and Ingrid Demandes
Chapter 13 Quality Assurance of Medicines in Practice 219
Beverley Glass and Alison Haywood
Chapter 14 Patterns of Medical Errors: A Challenge
for Quality Assurance in the Greek Health System 245
Athanassios Vozikis and Marina Riga
Chapter 15 Critical Success Factors
for Quality Assurance in Healthcare Organizations 267
Vctor Reyes-Alczar, Antonio Torres-Olivera,
Diego Nez-Garca and Antonio Almuedo-Paz
Chapter 16 The ACSA Accreditation Model:
Self-Assessment as a Quality Improvement Tool 289
Antonio Almuedo-Paz, Diego Nez-Garca,
Vctor Reyes-Alczar and Antonio Torres-Olivera
Chapter 17 Quality Improvement Through
Visualization of Software and Systems 315
Peter Liggesmeyer, Henning Barthel, Achim Ebert,
Jens Heidrich, Patric Keller, Yi Yang and Axel Wickenkamp
Chapter 18 Automatic Maintenance Routes
Based on the Quality Assurance Information 335
Vesa Hasu and Heikki Koivo
Chapter 19 Implementation of CVR / IT Methodology
on Outsourced Applied Research to Internship
Environment, Case, Information Technology
Directorate of Bina Nusantara Foundation 353
Renan Prasta Jenie
Contents VII
Chapter 20 Improving Quality Assurance
in Automation Systems Development Projects 379
Dietmar Winkler and Stefan Biffl
Chapter 21 Optimization of Optical Inspections
Using Spectral Analysis 399
K. Ohliger, C. Heinze and C. Krhnert
Preface
Quality is one of the most important factors when selecting products or services.
Consequently, understanding and improving quality has become the main issue for
business strategy in competitive markets. The need for quality-related studies and
research has increased in parallel with advances in technology and product
complexity. Quality engineering and management tools have evolved over the years,
from the principles of Scientific Management through quality control, quality
assurance, total quality, six sigma, ISO certification and continuous improvement. In
order to facilitate and achieve continuous quality improvement, the development of
new tools and techniques are continually required.
With the initiation of Scientific Management principles by F. W. Taylor in 1875,
productivity became a focus in dealing with complex systems. Later, systematic
inspection and testing of products were started by AT&T in 1907. After the
introduction of control chart concepts by W. A. Shewhart in 1924 and acceptance
sampling methodology by H. F. Dodge and H. G. Romig in 1928 at Bell Labs, statistical
quality control tools became widely used in industry. After 1950, total quality control
concepts were introduced by several pioneers including A. V. Feigenbaum. In addition
to development of several new quality control tools and techniques, use of design of
experiments became widely used for quality assurance and for improving quality. In
1989, Motorola Company initiated six sigma concepts to assure high quality for
complex electronic products and related systems. After 1990, ISO 9000 quality
certification programs were introduced and became widespread in many
organizations. American Society for Quality Control became American Society for
Quality to put emphasis on quality improvement.
Quality terminologies are varied and often used interchangeably. In particular, quality
assurance and quality control are both used to represent activities of a quality
department, which develops planning processes and procedures to make sure that the
products manufactured or the services delivered by organizations will always be of
good quality. However, there is a difference between the two. In particular, while
quality assurance is process oriented and includes preventive activities, quality control
is product oriented and includes detection activity, which focuses on detecting the
defects after the product is manufactured. Thus, testing a product is in quality control
domain and is not quality assurance. Quality Assurance makes sure that the right
X Preface
things are done in the right way. It is important to make sure that the products are
produced or the services are provided in good quality before they are tested in the
final stage of production. Once in final stage, there is no way to recover the costs that
are already incurred due to bad quality. Quality assurance is therefore an area that
needs to be studied and investigated in more detail with respect to various production
processes, and service activities. Quality assurance is widely applied in such areas as
industrial manufacturing, healthcare, medical areas, software, education,
transportation, research, government activities, and other service industries.
The purpose of this book is to present new concepts, the state-of-the-art techniques,
and advances in quality related research. Novel ideas and current developments in the
field of quality assurance and related topics are presented in different chapters, which
are organized according to application areas. Initial chapters present basic ideas and
historical perspectives on quality, while subsequent chapters present quality assurance
applications in education, healthcare, medicine, software development, service
industry, and other technical areas. This book is a valuable contribution to the
literature in the field of quality assurance and quality management. The primary target
audience for the book includes students, researchers, quality engineers, production
and process managers, and professionals who are interested in quality assurance and
related areas.
i = 1
N
i
i
4 4
i
c
4
ISO-GUM and Supplements are Utilized for QA of BCA Data
35
laboratory,(see ISO17025). The GUM-GUM has been formally adopted as a US National
Standard in the form of ANSI/NCLS Z540-2-1997, ISO is edited ISO-15189 to medical use.
3.1 To apply the ISO-GUM
GUM approach two main assumption must hold (12).
1. The system is modeled using a functional relationship between measured quantities
X=f(x) and the measurements result y in the form y=f(x). The adequacy of the formula
for uncertainty carried out u(y) which is derived by propagating uncertainties in a first-
order approximation to the model of the measurement system. Production of analysis
model is explained to the supplement 2.
2. The distribution of y is known, e.g. Gaussian or student distribution in order to obtain
the value of coverage factor k for gaiting assurance interval with result.
3.2 Type A uncertainty estimation
Type A evaluation of standard uncertainty may be based on any valid statistical method for
treating data. Example is calculating the standard deviation of mean of a series of
independent observation, using the method of least squares to fit a curve to data in order to
estimate the parameters of the curve and their standard deviations is calculated.
Type A is defined Uncertainties are evaluated by the statistical analysis of a series of
observation by ISO guide. In type A, that performs only normal probability distribution of
measurement data, and parametric test method is useful ANOVA, so called classical
statistics. The normal distribution is also called the Gaussian or the bell shape curve, it is
ubiquitous in nature and statistics useful the central limit theorem. Every variable element
can be modeled as sum of many small variations which are approximated normal
distribution. it is the only stable distribution having all of its moment finite.
3.3 Type B uncertainty estimation
Type B is upgrading evaluation of uncertainty than type A for abnormal distribution in
order to obtain assurance, it needs employs other method than the statistical method, and
based on non-parametric test method. The other method than statistical was proposed
MCMC to type B. Type B is defined Uncertainties evaluated by means other than the
statistical analysis of a series of observations. in ISO/BIPM guide.
Assignment of PDF to a quantity analysis is using the Principle of Maximum Entropy
(PME). Therefore the PME tells us that the Assignment of PDF is rectangular, t-distribution
and normalize distribution. (see Fig.3). Type B evaluation of standard uncertainty is usually
base on scientific judgment using all information available. Type A evaluation of
uncertainty based on limited data are not necessarily more reliable than soundly based Type
B evaluations.
3.4 Gibbs sampling by Bayesian theory
Gibbs sampling is an algorithm to generate a sequence of samples from the joint probability
distribution of two or more random variable. The purpose of such a sequence is to
Quality Assurance and Management
36
approximate the joint probability distribution, or to compute an integral (such as an
expected value). Gibbs sampling is a special case of the M-H algorithm, and thus an
example of practical use is MCMC algorithm. The algorithm is named after the physicist
J.W. Gibbs, in inference to an analogy between the sampling algorithm and statistical
physics. The algorithm was devise by brothers Stuart and Donald German, some eight
decades after the passing of Gibbs.
Gibbs sampling is applicable when the joint distribution is not known explicitly, but the
conditional distribution of each variable is known. The Gibbs sampling algorithm generates
an instance from the distribution of each variable in turn, conditional on current values of
the other variable. It can be shown that the sequence of samples constitutes a Markov chain
and the stationary distribution. Markov chain is just the sought after joint distribution.
Gibbs sampling is particularly well adapted to sampling the posterior distribution of a
Bayesian networks, since Bayesian networks are typically specified as a collection of
conditional distribution. The point of Gibbs sampling is that given a multivariate
distribution, it is simpler from a conditional distribution than to marginalize by integrating
over a joint distribution.
It is now the definitive document supplement of ISO-GUM on evaluating.
3.5 Assurance proceed
Quality Assurance (QA) of a measurement result is substantial by proposal new almost
every year, QA is doing its best also in the field of a clinical examination to be able to
respond to a patient or a donor effectively. The assurance performance of ISO-GUM is come
out by set up of the confidence interval [4] and is decided. Therefore, it is considered that
the value acquired by regulation of ISO-GUM is an assurance performance. ISO-GUM is
edited in series to 98-5 from 98-1 as a guide of ISO/IEC. It has published by Joint Committee
guide Measurement (JCGM). JCGM document number is JCGM 100-107.And ISO14253 [10]
was publish as ISO standard.
ISO14253 (See Fig.4) contains decision rules which require the tolerance zone to be reduced
by the measuring uncertainty. The measurement data are made to prove conformance a
specification and expand by the measuring uncertainty. And it is attempting to prove non-
conformance to a specification. It has known the legal phrase prove beyond a reasonable
doubt.
Specification has two clear limits lines. Uncertainty makes the question of conformance
more complex. In a drawing specification, it is usually clear what the limits tolerance are, it
may be a maximum acceptable cover factors value of upper limit and a low limit is reject
line.
The method of setting up a confidence interval (zone) is defined by ISO-14253-1 as same as
conformance zone. And measurement uncertainty is increased.[14]
However, the ISO-GUM approach exhibits some limitations, like:
1. Model linearization: The principle of error propagation applied to obtain the standard
uncertainty truncates the Taylors series expansion in first order terms. This is a linear
approximation that in some cases could need terms of higher order.
ISO-GUM and Supplements are Utilized for QA of BCA Data
37
2. Assumption of normality of measurand (z): In common practice, the distribution of the
result is taken as normal and consequently. Expand uncertainty U(e) is calculated as the
product of the coverage factor k and the combined uncertainty U(c). Thus k=2 is very
commonly declared value, which corresponds to a level of significance of the
approximately 95% in 2 sigma zone.
3. In calibration of the effective degree of freedom. If the distribution of z is approximated
to a students distribution, the coverage factor k is taken as the tabulated Students t-
value for given significance level and effective degree of freedom calculation by the
Welch-Satterthwaite equation (6). In the general cases, the analytical evaluation of the
effective degree of freedom is still an unsolved problem, type B uncertainties, generally
contributing with infinite degree of freedom. However, the ISO-GUM 95 approach
exhibits some limitations.
4. Modern concept of evaluation of measurement result uncertainty is based on the model
function. Model linearization, the principle of error propagation applied to obtain the
standard uncertainty truncates the Taylors series expansion in first order terms. This is
a linear approximation that in some cases could need terms of higher order as
Y=f(x
1
,x
2
,.,x
i
) as Eq.(1).
5. Eq.(1) applied to the use base on a first-order Taylor series expansion is approximation.
Uc is gotten by doing a geometric mean of the type A and B result. This is model with one
output which is adopted in current ISO-GUM. Knowledge of input quantities, which is
compete, comes from their PDF. While the PDF has good theoretical foundations, the
process of measurement modeling does not yet have them. There are no clues about it in
the ISO-GUM. This is depended on experience data and prior knowledge.
Fig. 4. Assurance interval by ISO-14253-1
Quality Assurance and Management
38
If the measurand in expand uncertainty goes into a conformance (confidence interval or
confidence zone), it value will be authorize the final report value as assurance performance.
4. Supplement of ISO-GUM
4.1 List of supplement
The list of supplements of ISO-GUM is shown below. (The mark * is under plans).
Introduction to the GUM related documents, there were published already three
supplements.
1. Supplement1: Numerical methods for the Propagation of distributions using a MCMC
method [3] by document JCGM101.
2. Supplement 2: Extension to any number of output quantities is useful models. JCGM102.
3. Supplement 3: Modeling for useful multivariable analysis. JCGM103.
An introduction to the GUM is under planning documents of supplement for ISO-GUM,
there are four supplements (3).
4. *Supplement 4: An introduction to be GUM and related documents. Published 2009
JCGM104.
5. *Supplement 5: Concepts and basic principle of measurement uncertainty evaluation.
6. *Supplement 6:The role of measurement uncertainty in deciding conformance to
specified requirements.
7. *Supplement 7: Application of the least squares method.
Data Quality Assurance Object (DQAO) development process consists of the following
seven steps by supplement 4.
Step 1. State the Problem
Step 2. Identify the Decision
Step 3. Identify the Inputs to the Decision
Step 4. Define the Study Boundaries
Step 5. Develop a Decision
Step 6. Specify Acceptable Limits on Decision Errors
Step 7. Optimize the Design for Obtaining Data.
4.2 MA in supplement 3
Practical use of multi-variable analysis (MA) is required for BCA from two or more
uncertainty elements being inherent. MA is defined in supplement 3. As for an algorithm,
the theoretical formula (3) is usefully. The supplement 7 is considering using a least squares
method as a base and using Burgers Equation and Crank-Nicolson method for a MA
Propagation of uncertainty for several variable can be simple considerably if it is simple
multiplicative of secondary variable.
QA of a measurement result is substantial by proposal new almost every year.
The practical use of MA is required for BCA from two or more uncertainty elements. It is
expected that the analysis result can begin to find a new uncertainty factor.
ISO-GUM and Supplements are Utilized for QA of BCA Data
39
5. Measurement principal
5.1 Radio-Immuno Assay (RIA)
The experiment should be use test reagents of RIA that is a kind of BCA. RIA is a scientific
method used to test antigen (example, hormone levels in blood) without the need to use a
bioassay. It involves mixing known quantifies of radioactive antigen with cold antibody to
that antigen, then adding unlabeled (cold antigen) is measuring the amount of labeled
antigen displaced. Initially, the radioactive antigen is bound to the antibody. When cold
antigen is added, the two compete for antibody binding sites. The bound antigens are
separated from unbound one. Radioactive isotope is used gamma emit of I-125. This is both
extremely sensitive and specific, but it requires special precaution because radioactive
substances are used, sophisticated apparatus, and is expensive. In this research, it is useful
main data of Erastrse-1 regent which is a sort of pancreas hormone.[22]
Immunoassays are a form of macromolecular binding reaction; no covalent chemical
bonding is involved. Antibodies interact with their antigen by weak hydrogen bonding and
van der Waals force. Antigen-antibody reactions are dependent on complementary
matching shapes being assumed by antibody variable regions of the immunoglobulin.
Almost all polyclonal antibodies used in immunoassay reactions are of the immunoglobulin
G class. The N-terminal 110 amino acid residues of both the heavy and light chains of the
immunoglobulin molecules are variable in sequence and interact to form the antigen
binding site. Nevertheless, this variability gives rise to a vast array of difference antibodies
binding to different molecules. Attributes of an ideal immunoassay is shown to follow
1. The immunochemical reaction behavior should be identical and uniform for both the
inference preparation and the analysis in the homogeneity sample.
2. The immunochemical reaction of the antibody reagent is uniform from batch to batch.
3. The immunochemical method is well standardized to ensure that the size of
measurement signal is caused only by the antigen-antibody product.
4. For macromolecules the results are declared in arbitrary unit, i.e. international Unit (IU)
conversion to mol/L(SI) unit is constant and is dependent on many factors.
The immuno-reaction of an antigen and a catalyst (an antibody activity) is led to
measurement theory of RIA with reaction kinetics. Reaction kinetics is expressed with the
chemical equivalent amount compound by unit time t. The chemical reaction is shown in Fig
5. The process of chemical change is divided into three phases that are a signs phase at
growth phase and stagnation phase. A signs phase shows the resistance characteristic over a
reaction in the preparation step of a reaction. A growth phase shows reaction capability in
the stage where a reaction grows rapidly. A stagnation phase with asymptote which is a
stage where the chemical reacting finally and reaches a chemical equilibrium. An
uncertainty element can be expressed with the abnormal state of reaction time and reaction
capability.
The strength of binding is determined by equilibrium binding constant for the antigen-
antibody complex formations. The binding follows the basic thermodynamic principles with
reversible reaction between two molecules. This relationship is described by the chemical
reaction model as (7) which is useful a chemical kinetics reaction R
1
of immunity with a
reversible reaction R
2
in a polynomial expression.
Quality Assurance and Management
40
R1
P+P*+Q
<=>
P*Q+PQ+PI+P*IP*Q (7)
R
2
Where are:
- P: antigen,
- Q: antibody,
- P*: Labeled antigen with detectable marker,
- PQ: Reaction compound,
- P*Q: reaction compound with P*,
- R
1;:
association constant
- R
2
: disassociation constant
- R; affinity.(Binding ratio P*Q/Po= %)
- Po is total antigen Po=PQ+P*Q+PI+P*I
- PI: Abnormal reaction compound.
Po is invariably an usual constant of nature in the law of mass action. In this case, it must
be the measured P*Q/Po of the effective binding ratio. Affinity is the same as the kinetic
reaction rate. An affinity increases until the deactivation of saturation that the reaction is
based in the reaction process in time. Kinetic chemical reaction is accelerated by bio-
materials as a quadratic differential polynomial equation with reaction time t. The
secondary order differential equation is as follows according to three phases as (8)
Ad(P*Q)
2
/dt
2
+Bd(P*Q)/dt+C(P*Q) (8)
The extent of reaction is shown in Fig.5. Secondary order differentiation of the first item
shows the rate of acceleration included a special resistance phase. It is shown to the portion
of start of the reaction curve in Fig.5. A primary differentiation of the next item is shown
reaction velocity. The last item shows the amount of chemical compound after reached
chemical equilibrium as stoichiometry. The first item has role important for security of
reaction and the analysis of an outlier.
Fig. 5. Elastase-1 chemical reaction
Kinetic reaction ratio is estimated as follow
ISO-GUM and Supplements are Utilized for QA of BCA Data
41
d[P*Q]/dt=R1[P*][Q]-R2[P*Q] (9)
k1[P*][Q]=(R1-R2)[P*Q]. (10)
The final reaction a stagnation phase is reached on chemical equilibrium. It become to
d[P*Q]/dt=0 and change from (9) to (10). An affinity state is shown on the reaction curve at
time.
5.2 Calibration curve
In this research, a purpose is improving the accuracy of the calibration curve used for
quantitative analysis and making it level which can be assurance. The accuracy of
calibration curve is important as intermediate accuracy of the whole measurement system.
The measurement data was collected by equalization of double sample in order to make
high order accuracy. The Data Quality Object (DQO) of the improvement accuracy targeted
the calibration curve for a chemistry quantity analysis.
Even in the case of measurements requiring multipoint linear (non-linear) calibration with
five or more different concentration reagents of reference homogeneity material. The
uncertainty of routine test values can be quantified using basically the same procedure as
Estimating the uncertainty of routine test values except that the uncertainty of the
reference material is calculated as a combined standard uncertainty using the mean value
obtained by averaging the standard uncertainty (see to Fig.6).
The reference material used should be an actual sample, the property of which is similar to
the patient spaceman to be assayed. Even in the multi-point linear calibration with three or
more different rations concentrations of reference material, the uncertainty of routine test
values can be quantified using basically procedures. Test reagent is called calibrator.
All the product calculation curves are having the quality verified by formula of Mechaelis-
Menten formula.
Key aspect is the Antigen-Antibody interaction.
1. Reaction is reversible and favors complex formation under physiological condition.
2. Binding depends on hydrogen bonds, van der vaals forces, ionic bonds, hydrophobic
interaction.
3. Binding is very specific and requires the correct 3-D structure of an antigen.
4. The amount of complex formed depended on concentration of antibody and antigen.
Both antigen and antibody (if large enough) have multiple sites for binding to occur.
Therefore, extensive cross-linking can occur when both are present in solution. When
antibody and antigen reach equivalence large immune complexes form which can
precipitate out of solution.
6. Experiment method
6.1 Progress of work
In immunochemical analysis can be nonlinear analysis that is applicable of estimating to the
uncertainty of assigned value of calibrators and QA control sample.
Quality Assurance and Management
42
The purpose of such a sequence is to approximate the joint probability distribution, or to
compute an integral (such as an expected value). The estimation of a possible discrepancy
takes into account both random error and in the measurement process. The distinction to
keep in mind and with regard to be able corrected or cannot be corrected theoretically
least.
Gibbs sampling is particularly well adapted to sampling the posterior distribution of a
Bayesian networks, since thus are typically specified as a collection of conditional
distribution. The point of Gibbs sampling is that given a multivariate distribution, it is
simpler to sampler from a conditional distribution than to marginalize by integrating over a
joint distribution. The algorithms are useful Softcomputing method, fundamental statistical
method, MCMC and MA, Softcomputing method is fuzzy function and chaos function.
6.2 Data quality object(DQO)
This experiment used the test reagent kits of the Elastase-1 that is one of test reagent of
pancreas hormone mainly. The test method is RIA [17], RIA is a kind of BCA with detectable
marker that is labeling the radioactive material of I-125. A measurement method is detection
of the gamma ray which I-125 emits.
The calibration curve made of the test reagent of six sorts of concentration (dose) that is
the arrangement harmonious in the shape of a stairs state. A calibration curve is created
by applying regression analysis to a frequency density of measurement result. The
composition of reagent concentrations are six sorts of 50, 150, 500, 1500 and 5000 dose.
Dose is international catalyst unit (IU). Test reagent is called as calibrator. The number of
sample size is total 320 sets of calibrators that is divided three groups (lots) that consists
one group of 120 sets and two groups of 100 sets. The number of one group is
recommended the least in ANOVA. It was made three groups here in order to investigate
whether a difference exists between groups. Fig.6 shows the procedure which creates
distribution of statistics from the population calibration curves to which regression
analysis was applied the frequency density distribution is created by measurement data
and analyzed. In an immunoassay the total amount of antigen for standard solution is
known by each dose. Plotting affinity against total antigen produces the standard curve.
The value for affinity is determined by radioactivity amounts remaining bound divided
by the total amount of radioactivity added in the beginning. The radioactivity is
proportional to the concentration of the labeled antigen. It is using this standard curve
and the affinity for an unknown sample the antigen concentration can be calculated. The
dose response curve shown is that a typical of RIA standard curve that is used calibration
curve.
In an immunoassay the total amount of antigen for standard solution is known by each
dose. Plotting affinity (binding ratio) against total antigen produces the standard curve. The
value for affinity is determined by radioactivity remaining bound divided by the total
amount of radioactivity added in the beginning the radioactivity is proportional to the
concentration of the labeled antigen. It is using this standard curve and the affinity for an
unknown sample the antigen concentration can be calculated. The dose response curve
shown is that a typical of RIA standard curve.
ISO-GUM and Supplements are Utilized for QA of BCA Data
43
Fig. 6. Make a probability distribution of Calibration curve batch, for QC[16].
6.3 Additional reagent samples
In this experiment, Elastase-1 sample data is verified whether it would be added other test
regents of two homeopathic test reagents of the same usage RIA and test chacking..
Furthermore, in order to investigate an information criterion number and likelihood test and
it used multivariable analysis in the time series.
Two sorts of homeopathic reagents having chosen, there are Thyroxin, and Testosterone.
The reagent of Testosterone is one female hormone and the composition of reagents
concentrations are 6 sorts dose which are 25, 50, 100, 250, 500 and 1000. The reagent of
Thyroxin is one of thyroid hormone and the composition reagent concentrations are 5 sorts
dose which are 0, 3.0, 6.0, 12, and 24.
7. Experiment result
7.1 PDF data of elasyase-1 reagents
Measured data is shown in Fig.7 and Fig 8. Both figure quotes the pareto graph that is a pile
of the quasi normal distribution curve (solid curve B) on the measured PDF graph (bar
graph A). Fig.7 shows 0 dose reagents data as the largest affinity in six sorts of calibrators of
Quality Assurance and Management
44
reagent, Fig.8 shows 5000 dose reagent data as the lowest affinity in the six dose sorts. A bar
data serves as basic data from now on advancing analysis which is observation data as A in
Fig.7 and Fig.8.
Quasi normal distribution is created by regression analysis from the measured frequency
distribution as B in Figs.7 and Fig.8. The ordinate shows the account of frequency density of
total 320 sample sets. The abscissa shows affinity (%) divided into 20 steps between
maximum and minimum affinity.
PDF graph is carrying out random change in any range of sample groups. The PDF of
random variation exists completely characterized in both figures.
Both figures are chosen as example of representation from six dose data. Six sorts all
concentrations of PDF data were shown the abnormal distribution. All PDF data of
measurement results of six sorts were not same as the form. Abnormal distributions are
cannot computed both skewness and kurtosis.
Fig. 7. PDF of 0 dose data of Elastase-1
Fig. 8. PDF of 5000 dose data of Elastase-1
ISO-GUM and Supplements are Utilized for QA of BCA Data
45
7.2 The superposition graph of six PDF data
Fig 9 is shown a superposition graph by six measured PDF forms on the variation of affinity
(%) of maximum and minimum positions. All of PDF are shown not same form.
Fig.10 is shown a superposition graph the abnormal distribution of six sorts curve obtain by
regression analysis, because all distributions are not take same as peak position.
The ordinate is the account of frequency of total 320 sample sets. The abscissa is shows
affinity (%=P*Q/P
0
). The abnormal PDF distribution should be required to create the CDF
follow up MCMC.
Fig. 9. A superposition graph of six measured PDF.
Fig. 10. A superposition graph of six the abnormal PDF.
Quality Assurance and Management
46
7.3 fundamental statistics quantity
Table 2 shows what summarized the fundamental statistics quantity (AIC, mean, RSS, Medi,
peak, Max, Min, F-test and t-test) and the data of EDA added the operation result by chaos
theory and Fuzzy logic. Max is the maximum value in upper limit of confidence interval and
Min is the minimum value in the lowest limit of confidence interval. Max and Min data use
primary confidence interval. Fuzzy logic use also 20 steps member function in fuzzy logic,
Chaos theory use difference equation in nonlinear.
Some value shows the same value based on many columns in table 2. Six columns (Fuzzy,
AIC, mean, RSS medi and peak) are shown in red bold letter. The focus inside of the same
value is the mean. The mean value can be referenced as a central value by data in this
experiment. This value can be set as a reference value by Type A for internal quality control
(IQC). The assurance interval by type A was calculated by 95% level and coverage factor
k=2. It is 2 sigma of a routine test level and it can be assurance against 95% level which is
given by the 0,025 and 0.975 fractions limited [7]. If measured data is over the limited line, it
is unclear that dispersion is large, so that the affinity was a low value.
Dose 0 50 150 500 1500 5000
Chaos 71.84 65.94 54.93 36/.77 22.5.2 12.17
Fuzzy 68.5 61.8 52.1 34.8 20.7 10.4
AIC 68.46 62.42 53.0 34.97 21.34 10.59
mean 68.4 61.8 52.2 34.7 20.8 10.5
RSS 68.3 61.9 52.1 34.7 20.7 10.4
Medi 68.3 61.7 53.1 34.8 20.6 10.4
peak 68.3 62.2 52.1 34.9 21.5 10.6
Max 78.2 71.8 60.0 43.1 28.9 17.1
Min 46.7 41.1 34.4 21.7 12.4 6.9
F-test 2.17 2.16 2.17 2.17 2.17 2.17
t-test 2.03 2.02 2.03 2.03 2.03 2.02
EFD 0.18 0.17 0.19 0.17 0.17 0.18
Cipher cod of result
Chaos chaos theory: Difference equation in nonlinear
Fuzzy: 20 steps membership function
AIC: Likelihood function (Akaike Information Criterion)
RSS: Root Sum Square
Medi: Central value
Peak: peak point.
Max: Maximum value in distribution
Min Minimum value in distribution
F-test F-distribution
t-test t-distribution
EFD: Effective Freedom Degree
Table 2. Fundamental statistics quantity by type A
ISO-GUM and Supplements are Utilized for QA of BCA Data
47
7.4 CDF data
CDF data shows in Fig. 11 and Fig 12. These data quoted a pareto graph that is a pile of CDF
distribution curve (solid curve B) on the PDF (bar graph A). Fig.11 shows the data on 0 dose
reagents as the largest affinity in six sorts of reagent, and Fig.12 shows the data on 5000 dose
reagent as the lowest affinity in six sorts of reagent.
This research analyzed of abnormal portion looked on CDF curve in Figs.11 and 12. By ISO-
GUM of type B. it acquire further higher measurement accuracy and, it is required to
analyze a fault element by FTA and EDA. Here, it has to process by type B for abnormal
distributions. Fig 7 and Fig,8 data was useful basic data in this research. In both Figs 11 and
12, the reagent kit is divided into three groups (lots) and it shown influence to verify of
difference between in reagent kits. The ordinate of is the account of frequency of total 320
sample sets. The abscissa is shows affinity (%=P*Q/P
0
) which All graphs quote variation of
affinity that divided the affinity into 20 ranks between maximum and minimum. The
ordinate quotes generating frequency counts.
Fig. 11. Elastase-1 0 dose of 3 rots graph.
Fig. 12. Elastase-1 5000 dose of 3 rots graph
Quality Assurance and Management
48
The CDF curve shown the form of sigmoid and bending has seen in some portion. The bend
of a curve suggested that abnormalities existed in a chemical reaction.
All of CDF result (including the four sorts of other dose) showed a state of an abnormal
distribution similarity and not same form. The abnormal distribution of PDF should be
required to useful MA that is nonparametric test and nonlinear analysis.
7.5 Confidence zone (interval)
The protocol of QA was development to estimate the uncertainty of measurement of a
chemical analysis by utilizing in house validation studies. The approach was to generate an
estimate of the uncertainty across the analytical concentration range. [21]
Table 3 shows amount of calculation result by the Welch Satterthwaite as Eq (3) for coverage
factor simulation. Value in table 3 is converted into an effective free degree from the Welch
Satterthwaite factor by standard statistical table showing EFD in table 3. The experiment
result needs to set coverage factor k to 2.2 by standard statistical table. Because coverage
factor 2.0 is generally used as standard. It is necessary to make narrower than a general
value the confidence interval which can be assured in this case.
Table 4 shows the confidence interval and related data for QA, a result is expressed
numerically and it is. Assurance Interval (AI) data shows final assurance value. Reject zone
is shown also in the t-distribution and the square distribution in MCMC of Fig.3.
The assurance interval (zone) determined based on type B of ISO-GUM, in this case is
required to set the narrower interval than getting ANOVA value for external quality control
(EQC) that is required 99.7% as more than three 3 sigma. Only the measured value which
exists inside an assurance interval turns into assured performance.
The measurement vale whose assurance is attained only a mean value which is exist in the
confidence zone (see Fig 2) inside assurance interval (AI in table 4) that is authorize.
In the case of a type A evaluation of uncertainty, repeated measurement indications are
regarded as independently drawn from normalized frequency distribution and according to
its suggestion the uncertainty evaluation method of supplement 1 is applied after having
assigned scaled and shifted t-distribution to corresponding input quantities.
Next research investigated the cause of the abnormal part shown in curve of CDF. FTA and
RCA performed the method.
Sample size 0 50 150 500 1500 5000
102 17.18 16.83 16.28 16.62 16.64 18.22
100 18.22 16.87 16.28 16.45 16.88 16.84
110 18.27 18.27 18.68 16.07 18.19 18.51
29 7.31 7.44 7.3 7.31 7.27 7.29
341 60.98 59.39 64.24 56.45 58.97 34.1
Table 3. Calculation result by the Welch Satterthwaite
ISO-GUM and Supplements are Utilized for QA of BCA Data
49
Dose 0 50 150 500 1500 5000
SD Central 62,4 56.4 47.2 32.4 20.6 12.0
0.95 UA 8.64 8.43 7.03 5.86 4.53 2.8
CIA 53.8
71,0
48.
64.9
40.2
54.2
26.5
38.3
16.1
25.2
9.2-
14.8
N.D
Central 68.3 62.2 52.1 34.9 21.5 10.6
0.95 UB 7.26 6.54 6.11 451 3.11 1.84
CIB 61.-
75.6
55.
68.7
46-
58.21
30.3
49.6
18.4
24.6
8.76-
12.4
Us UC 11.2 10.67 9.22 7.32 5.40 3.29
AI CIC 62.4
73.9
56.8-
67.7
4.61-
56.7
31.3
38.6
18.8
24.2
9.0-
12.2
Cipher cod of result
SD: Standard Deviation
ND: Normalize Distribution
Us: Standard Uncertainty
AI: Assurance Interval
Central value
0.95UA: 0.95%x2 Uncertainty type A
0.95UB: 0.95%x2 Uncertainty type B
CIA: Confidence Interval type A
CIB: Confidence Interval type B
UC: Combine Uncertainty
CIC: Confidence Interval for assurance
UC: Combined uncertainty
Table 4. Accuracy interval and related data
7.6 MA date
7.6.1 Data of elastase-1
Uncertainty associated with measuring operation which are calibration dispersion, within-
day and between days, within-laboratory and between- laboratory dispersion, and the like,
including factor due to reagent preparation and instrument variation. In co-data which is
inherent in a measurement result, two or more uncertainty factor analyze by MA. The time
depended uncertainty analysis is day to day variance in this experiment.
In former research, it used multiple-regression for MA based on Law of propagation of
Uncertainty in EDA and has found out a new uncertainty factor. Fig.13 and Fig.14 is
importance data in which is new variable element as the influences for storage days. While
the reaction capability is quoted fall down of a test reagent for storage days.
Fig.13 shows changing of the reaction capability by storage days of 0 dose reagent. Data of
Elastese-1, it is data comes to deteriorates in right going down in proportion to the increase
in days to day. To while the reaction capability of a test reagent downs for storage days.
Quality Assurance and Management
50
Fig.14 shows changing of the reaction capability by the storage period days of 5000 dose
reagent. Data shows a degradation of reaction capability that reaches a detectable limit and
it is meaning the unstable state of large uncertainty.
In both graph, the ordinate is the affinity (%). The abscissa is shown storage days.
Fig. 13. Change under storage days of 0 dose.
Fig. 14. Change under storage days of 5000 dose
Fig.15 is shown change of SD value under storage days by EDA. In Fig 15, SD value has
fallen so that the concentration of reagent as which it is regarded the change united with the
biorhythm of 28 diurnal periodicity exists. SD value with reaction capability is falling as to
slide with concentration dose. Data of Fig.15 has mean very important to improved accuracy
as fault elements The abscissa shows the storage days of every seven days interval in Fig.14.
The change interval was a periodical target on the 28 days interval of biorhythm. In the
addition, in the domain of low binding capacity, all the unstable of accuracy are as same.
ISO-GUM and Supplements are Utilized for QA of BCA Data
51
Fig. 15. Storage days variance by type B of EDA
Fig. 16. Storage days variance by type A of ANOVA
Fig.16 is shown change of average value under storage days by the data based on ANOVA,
only a flat change of right going down is shown and a periodic change is not seen.
7.6.2 MA data of additional reagents
In this experiment, since it seem that the data of 7.6.1 is important. I verified whether the
same result would be obtained with two homeopathic test reagents of the same usage RIA.
Furthermore, in order to investigate an information criterion sample number and likelihood
test and it used multivariable analysis in the time series. The results are shown Fig.17 and
Fig.18.
Fig.17 and Fig. 18 shows the graph which laid change of SD and of the number of samples
on the top of storage days. Fig. 17 shows Thyroxin data. Fig.18. shows Testosterone data.
In both figure, although a periodic change is looked at by change of SD for under every
storage days of six sorts dose as Standard Deviation (SD) in order to explore the root cause
of fault elements, it will become unstable data few samples. The both figures showed the
same characteristic results. Thereby, the check of the reproducibility of an uncertainty factor
was completed. About the number of samples, it is the information criterion by maximum
Quality Assurance and Management
52
likelihood theory need to be inquired. This research is under experiment. In Fig.17 and 18, it
is unstable area by number of five or less samples. The ordinate shows SD and number of
samples. The abscissa shows the storage days of every seven days interval. The ordinate
shows SD and number of samples In both graph, the ordinate is the affinity (%) and
frequency. The abscissa is shown every seven storage days.
Fig. 17. Shows Thyroxin data.
Fig. 18. Shows Testosterone data.
7.6.3 Interaction and allosteric effect in data
The purpose of this chapter is to outline methods for assessing uncertainties related to
material inhomogeneous that can be a factor in uncertainty analysis (see chapter 6.2).
One more is found in the uncertainty factor. The interaction effect and the allosteric effect
are generating by the source of biorhythm. Binding of antibodies to antigens is reversibly
and very specific. The introduction of an immune response depends on the size of antigen.
Small molecular weight compounds (<2000 Daltons) such as drugs is unable to induce
antibody formation.
The interaction investigated the phenomenon prevented from fundamental reaction
principle. The example of calibration curve has generating of an interaction which is shown
ISO-GUM and Supplements are Utilized for QA of BCA Data
53
sample in Fig 19. The interaction and allosteric effect were considered by from the
experiment results of in fig.19. Ordinate is affinity (%) of reagent. Abscissa is dose of reagent
at table position as from 0 to 5000.
Fig. 19. Interaction is exact between 2 calibration curves as an example
Some one exists in the allosteric effect which inhabits reaction process. Both effects like in
the bio- science on theorem of logistic function.
8. Conclusion
QA system of clinical test data by ISO-GUM is made utilization in 2006. It included in IT
system plan for medical health care in 2010. This research is continued in order to reliance of
QA further. In ISO-GUM it is pursued two or more buried multivariable uncertainty factors.
Validity of ISO-GUM is increasing by additional issue many supplements.
This research started for the purpose of preventing the clinical misdiagnosis by ambiguity
data on medical care. Therefore, the work is obtaining that of data stable in higher accuracy
has been continued. Improve strategy found out by uniting QE and ISO-GUM. The
assurance of measurement data which was able to be attained new technology for is main
purpose. Clinical data obtained and expected from exact prediction of patient individuals
pathological change. After that, a result came to be utilized for the world wider base medical
care of EQAS when improvement of ambiguity was obtained. The result of research has
been satisfied,
Uncertainty of measurement, traceability and numerical significance are separate but closely
related concepts that affect both the format and information conveyed by a quantitative test
result. In addition, use of SI units provides a consistent basis for the reporting of clinical
laboratory. Katal as a SI unit which evaluates the reaction kinetics of chemical will be used
for the near future.
The experimental result sees enable exact diagnosis decision taking in Bayes inference to QE
and ISO standard. Medical Laboratory Quality System (MLQS) is essential in laboratory to
the correct result for patient and donor by Good Laboratory Practice (GLP)
QA has grown to be equivalent QC which can obtain the same result when and anywhere.
Quality Assurance and Management
54
9. References
[1] BIPM. IEC. IFCC. ISO. IUPAC. OIML.Guide to the Expression of Uncertainty in
measurement in 1993, revised and corrected 2
nd
ISBN 92-67-10 pp188-9, 1995
[2] Joint Committee for Guides in Metrology (JCGM). Guide of the expression of
uncertainty in measurement. Supplement 1 In 2006
[3] Barry N Taylor and Chris E Kuyatt. Guideline for Evaluating and Expressing the
Uncertainty of NIST Measurement result. {NIST Technical report Note 1297 in
1994 edition}
[4] Mario. Plebani Errors in clinical laboratories or errors in laboratory medicine? Clin.
Chem. Lab. Med. 2006. 44(6)
[5] Barry Taylor. Chries E.Kuyatt Guidelines for Evaluating and Expressing the
Uncertainty of NIST Measurement Results NIST Guide for Evaluation and
Express. Measurement. Uncertainty. In Sept 1994.
[6] Paula. R.G.Couto. Jailton.C.Damascene. Renata. M.H.Borges. Uncertainty estimation of
mechanical assay by iso-gum 95 and Monte Carlo simulation-case study: tensile
strength, torqe and brinell hardness measurements IMEKO September 17-22 2006
in Brazil
[7] Lu Tang and Scott Willi Uncertainty calculation in Analytical Chemistry Chemical
Metrology, INNS, URCC. February 2001
[8] G.Fanti. A Possible improvement to the iso-gum, {IMEKO-2000 World Congress,
Vol.9, pp.77-82, in Austria, 2000}
[9] Voluntary EMC Laboratory Accreditation Center Inc. Guideline for Traceability of
Measurement VLAC- VR103 Second Edition in 2002.12.19
[10] K.Gregory. G. Bibbo. and J.E.Pattison. A standard approach to measurement
uncertainties for scientist and engineers in medicine. Australasian Physical &
Engineering Sciences in medicine. Vol.28 No 2 P131-139 in 2005
[11] Jerzy M.Korczyski. Calculation of expanded uncertainty Joint IMEKO TC-1 & XXXIV MKM
Conference 2002. {Wroclaw 8-12 September, 2002.}
[12] U.M.Koczynsky. Calculation of expanded unceriainty IMEKO world congress in 2000
[13] Pawel, Fotowics, Method for calculating the coverage factor in calibration.{OIML
Bulletin XLIII No.4 October, 2002}
[14] Dr.Henrik.S. Nielse Iso-gum 14253-1 Decision Rules Good or Bad.? National
Conference of Standards Laboratories. Workshops & Symposium In 1999
[15] Mauro. Panteghini. Traceability, Reference Systems and Result Comparability. Clin
Biochem. Rew. Vol.26. p97-104 August 2007.
[16] RODBAD and D,M.Hutt. Statisticl analysis of immunoraiometory (Labelld antibody
ASSAY.) {IAEA SM-!77/278, 1977
[17] Colin.Selby Inference in immunoassay Ann.clin.Biochem. Vol.36. 1999.pp704-721
[18] Dorozhovets Mykhaylo. Warsza Zygmunt Lech. Methods a upgrading the uncertainty
of type A evaluation (2)
[19] Enginering statistics handbook issue NISTNIST/SEMATECH, issue NIST in 1992
[20] Maurice Cox, Peter Haris Up a GUM tree? Try the Full Montel National Physical
Laboratory. Tedding Middlesex. UK. TW11. OLW
[21] Greg O Donnell and Robert Geyer The Estimation of Uncertainty by the Utilization
and Quality Control Data Thornleigh Ver, 1 18/06/2001
[22] Wikipedia, the free encyclopedia Radioimmunoassay
4
The Use of Quality Function
Deployment in the Implementation
of the Quality Management System
Elena Condrea, Anca Cristina Stanciu
and Kamer Ainur Aivaz
Ovidius University of Constanta
Romania
1. Introduction
Nowadays a strong accent focus on quality, this period of time being considered like one of
the quality years.
Firms are forced to reduce losses from the sales more and lower and also to extend their
dispatch markets concomitantly with new customers gain. The competition more and more
intense brought in the first plan the idea that quality is not something added, not something
good to be owned but a condition to survive.
Being a complex item, quality couldnt be directly and easily measured and expressed,
except for some technical characteristics and the majority of the economic one.
Quality depends also on corresponding materials, the equipments performances, the
technology, the technical control accuracy, the employees suitable qualification etc. On the
market, at a certain moment, several products could be found although they accomplish the
same functions and have quite different performances and prices. To each set of
performances correspond certain advantages, which could be quantified, but for each user,
the advantages curve is different, in respect of the destination of the products.
Things look quite different if we try a quantitative expression of the quality or of a research
project, an innovation initiative or of a business proposal. We could not talk about a quality
standard, or in any case, about a universal one. Thats why it exists a need to find a very
general method, with universal appliance, to permit each time the use some specific
instruments.
As well, the conditions in which the products quality is determined are extremely complex,
due to both objective and subjective elements.
Starting from here, B. Boehm, J.A. McCall, P. Richard and G. Walters structured a number of
principles to allow a quantitative and objective measurement, in conformity with the
scheme:
Quality Assurance and Management
56
Subject quality
Characteristics (externals)
Elements (internals)
Measurements (quantitative of the internal elements)
The main idea at the foundation of their studies is that the measure to express quality must
result in an amount of numerous measurements, each having in view a certain
characteristic. In conformity with the scheme, each product presents several characteristics
to be appreciated. Each characteristic depends on an amount of internal elements of the
subject to be measured, elements which could be quantitatively expressed [values of
elements are to be found into numerical values of the characteristics and these, in their turn,
will conduct to a quantitative indicator of the quality].
Meanwhile, with the reconsideration of the quality notion there appear also methods to
allow finding solutions to better satisfy a certain buyers segment. Such a method, known in
the literature as QFD (Quality Function Deployment extension of the quality function) or
under the more familiar name of House of Quality, name given by the shape of one of the
diagrams used which seemed to be a house, like having been designed by a child.
2. Quality function deployment. Theoretical aspects
Named also the voice of customer, QFD is a systematic method to develop products/
services based on expectations and desires of customers, the position on the market of these
products and services and their efficiency.
The basic principle of the method is represented by the customers requirements in each step
of their trajectory.
Specific for this method is the fact that all the development and renewal of products and
services activities are perceived from the customers perspective.
QFD is a team method, being applied by a team of 6-8 people, who must be involved in all
the firms departments.
QFD represents in fact a planning process, made to help the design, production and
marketing of some products and services taking into account the customers opinion.
The method issued in 1966, initiated by the Japanese Yoji Akao, being used in fact for the
first time in 1972 by Mitsubishi and starting with the 80s
,
the method gained a large
applicability both in USA and in Europe (1988), in order to design the development of
different products, processes or projects.
Yoji Ajao defines QFD as being a method which transforms the consumers requirements in quality
characteristics and designs the quality of the finished product/service, through the systematic
The Use of Quality Function Deployment in the Implementation of the Quality Management System
57
development of the relationships between demand and characteristics, starting with the
products/services functions, followed by its characteristics, its components characteristics and ending
with the stages and characteristics of the processes from which it results.
The objectives of the method could be structured as follows:
Structuration of the design process;
Reduction of the design cycles;
Transformation of the customer voice in technical requirements and quality plans;
Increasement of the quality level of the final products.
The advantages of using QFD are to be:
The customer needs are restored more accurate into the specifications of the
products/process design;
Shorter design and development cycles;
Lower costs, high productivity;
Documentary orientation;
The team involvement;
Experience and information are structured into a concise format, easy to be assimilated.
The method allows the elaboration of a project concerning the clients requirements. First of
all it must take place an inquest to establish which are the functions of the products
expected by the customers and also their importance. Then the characteristics are settled and
after that they are correlated with functions. In the meantime, some comparisons with other
firms performances are made and also the characteristics are analyzed in their relationship,
in order to observe which ones are correlated and which ones are opposite.
Then, similarly, from the characteristics, the methodology follows with technical measurable
performances and then with materials technology.
2.1 Short history of QFD development and application
QFD method was developed in Japan at the end of the 60s by the professors Shigeru Miyuno
and Yoji Akao. At that moment, the statistic control of the quality, introduced after the 2
nd
world wide war, had already roots in Japan. New quality methods were introduced, with
the contribution of the quality control involvement in the business management, process
known afterwards as TQC or TQM.
Professors Mizuno and Akao intended to develop a method to guarantee the quality, a way
to make a product suitable for clients, before its issue on the market. Till that moment, the
quality control methods were focused on the settlement of difficulties issued during the
production or after.
The first important scale application was presented in 1966 by Kiyotaka Oshiumi from
Bridgestone Tire in Japan. He used a fish bone diagram to discover the customers
expectations (outputs), and those characteristics and factors of the process (causes) which
influenced the respective result.
This method was first used for the growth of the Naval Shipyards performance, belonging
to Mitsubishi. Initially, it was used to improve the quality of the companys products; in
Quality Assurance and Management
58
time, however, they realized that, using the same analysis technique, the method could be
used for the improvement of the quality belonging to every activity within an economic unit
which produces or carries out services.
In time, certain famous Japanese companies had confirmed the methods efficiency, Toyota
being among them, who introduced it in 1977 and which, in a 7 years application period,
lowered the fabrication costs of an automobile by 40%, while significantly raising the quality
and lowering the fabrication cycle.
In 1986, Ford and Xerox, in the United States, adopted the method.
QFD means a mot-a-mot translation of the Japanese words hinshitsu kino tenkai, but first
was translated like evolution of the quality function; name suggested by dr. L.T. Fan in 1978.
At the first workshop (seminar) about QFD in USA, the sponsor Masaaki Imai seemed that
evolution doesnt reflect the sense of change and consequently, hinshitsu tenkai could be
better translated like the quality development. In that manner appears the name of QFD
(Development of the Quality Function).
At the foundation of QFD method there is the House of Quality, a set of matrix used to link
the voice of customer with the technical needs of a product, the control plans of the process
and the production operations.
In the scheme (fig.1) we can observe the structure of the House of Quality and explanation of
each component:
Inter-relations
Technical demands
Voice of customer
The relationship
between customer
demands and
technical
requirements
The clients demand
priority
Competitive
evolution
Technical
requirements
priorities
Fig. 1. The structure of the House of Quality
The Use of Quality Function Deployment in the Implementation of the Quality Management System
59
2.2 QFD methodology
The central point of the diagram looks like a table with two entrances. On the rows there are
the customers requirements and on the columns is underlined the correspondance between
the customers expectations and the quality characteristics of the respective product or
service. This matrix or table is named the matrix of relations.
The QFD is also called the House of Quality because the solving solutions of the discussed
problem are found in a series of matrix arranged as a house consisting of foundation, first
floor, attic and roof, as you can see in fig. 2.
Global
characteristics
Required
quality
HOW/HOW
Technical characteristics
(HOW)
Market
(competition)
FOR WHAT
Objectives =
HOW MUCH
Points
Clients
demands
WHAT
Global impact
Organizing
Difficulty
WHAT / HOW
Relationship Matrix
WHAT / FOR
WHAT
Competition technical
evaluation
HOW MUCH / HOW
Objectives /
technical metods
h i
Technical
Response
V
o
y
c
e
o
f
c
u
s
t
o
m
e
r
Corelations:
Strong 9
Average 3
Weak 1
Fig. 2. QFD example
Quality Assurance and Management
60
Thus:
The first floor is build out of the clients voice and here we find:
The problems/clients demands;
The correlation matrix of the problems demands with the characteristics required by
their solving;
The matrix which represents the firms position in comparison with the main
competitors, for each demand of the analyzed problem;
The houses foundation consists of:
The technical evaluation matrix of the main competitors;
The objectives and technical measures needed in order to solve the analyzed problem;
The houses attic consists of the characteristics and/or methods needed to solve the problems
demands.
The houses roof represents the correlation matrix of the technical characteristics.
In addition to these building elements of the House of Quality, the analysis also requires to be
made the correlation between the elements that form the House of Quality.
Generally, there are three types of correlations:
Strong;
Average;
Weak.
It comes by itself the fact that there is the possibility of not having a correlation between
some elements of a matrix.
Each correlation category will be given a certain score, as well. A codified representation of
each correlation category is recommended, in the purpose of x having a more suggestive
matrix representation.
The steps of developing a QFD analysis are as follows:
1. The selection and preparation of the problem;
2. Establishing the demands (WHAT), which means:
Identifying the problems demands or the clients wishes (the clients voice);
Their importance (giving points, percentages or hierarchizing the demands).
3. The perception and judging of the competition (FOR WHAT), which presumes the
following:
Gathering information about the market;
Commercial information;
Comparing with the main competitors , focusing on each of the clients demands
(WHAT/FOR WHAT);
4. Establishing the technical characteristics and/or methods that could compete to solve
the analyzed problem (HOW);
5. Completion of the correlations in the WHAT/HOW and HOW/HOW matrix;
6. Technical competition evaluation, which means:
The Use of Quality Function Deployment in the Implementation of the Quality Management System
61
Comparing each technical characteristic with the competition (HOW
MUCH/HOW);
Calculating the importance of the technical characteristics and their hierarchizing;
Filling out the Global impact and Organizing difficulty rows.
7. Exploitation, binocular vision, which means analyzing the WHAT/HOW matrixs
coherence;
8. Carrying out the quality improvement process, which presumes:
The process of improving the products/services quality;
Extending the analysis.
The QFD analysis can be pictured as a branching graph, meaning that from each of the
resulting problems diagrams, new QFD analyses can be made.
With the QFD method, regarding the quality control and assurance, there can be put into
practice other methods, techniques or instruments taken from the quality theory or
management, such as:
National, regional, international standards;
Market studies;
The statistical control of the products/services;
The Pareto Diagram, difference cause-effect Diagrams, Brainstorming Method etc.;
The Quality Circles etc.
QFD does not limit itself only to technological problems; it can also be applied to aspects
regarding the reliability and costs, allowing for the definition of prioritary action directions
(opportunities of technological nature or a difference nature, risks analysis etc.).
It can be said that, an important advantage of the QFD method is given by the possibility of
identifying the clients latent demands (demands which have not manifested themselves, yet).
In the application of the method some steps are to be followed:
1. Determination of the customers requirements and the importance for them.
2. Identification of the quality characteristics by the work team. The degree of
requirements coverment through characteristics is evidenced by a score system
(graph).
3. Determination of the quality characteristics which are to be performed for the new
product and evaluation of the difficulty graph to be obtained. Concomitantly is
processed also the sense of variation preferred for this values (increasement,
decreasement, indifference).
The evaluation of interaction and correlation between characteristics is emphasised in
the correlation matrix (the superior zone of the diagram which forms the roof of the
house).
4. The compared analysis of product/service planned with the product/service of
competitors from 2 points of view:
a. From the clients point of view;
b. From the technical point of view.
Comparing the quality characteristics of products/services with those of the
competitors.
Quality Assurance and Management
62
5. Establishment of the final values of quality characteristics for the new product.
The building of a House of Quality requires 6 basic steps:
1. Identification of the customer needs
The voice of customer remains at the base of the QFD process. Here below there are some
essential approaches regarding gathering information from the clients:
c. Official polls
d. Focus groups
e. Direct contacts with clients
f. Claims analysis
g. Online monitorization.
2. Identification of technical needs
Technical needs are characteristics that describe the customer needs in the designer
language. There must be measurable because the result is controlled (checked) and
compared with the target objectives. The roof of the house shows the relationship being
converted, using a series of symbols. A typical scheme uses the symbol for very strong
relationships and a for weak relationships. For example, two technical requirements of
certain superior services are the capacity, staff and equipment of a clinic. The relationship
between them is strong and, in order to increase the capacity, more staff and equipment are
needed.
3. The link between the customer needs and the technical needs
The customer needs must be written in the left column and the technical ones on the top.
Inside the matrix the symbols indicate the type or relation in a similar way with those used
at the roof of the House of Quality. The purpose of this matrix is to show if the final
technical needs cover the customer needs. This kind of evaluation is usually based on the
experts experience, customers reaction or controlled experiments.
The lack of a solid link between the customer needs and the technical ones show both that
the needs are not covered and that the final product will hardly accomplish them.
And if a technical need doesnt affect a customer need it could be useless, or the designers
might forget an important need of the customer.
4. Addition of the competitive evaluation and of the sale key points
In this stage the importance of every customer need is evaluated and the competitors
products and services are the ones which cover these needs and are also researched. These
evaluations are very important and reflect the customers expectations. Competitive
evaluation underlines the strengths and weaknesses of the competition. Due to this stage,
designers could discover methods to improve products and QFD method and the strategic
vision of the company shows the priorities of the important customer are not satisfied by the
competitors products (such as family activities), thus, the company could obtain advantages
by focusing on these aspects. The respective needs become sale key points and lie at the
foundation of the marketing strategies.
The Use of Quality Function Deployment in the Implementation of the Quality Management System
63
5. Evaluation of technical needs of the competitive products and services and
establishment of targets
This stage happens usually on the base of information added or products tested. These
evaluations are compared with the competitive evaluation of the customers needs in order
to determine the disparities between the customers needs and the technical ones.
If it is proved that a competitor product satisfies the customers needs but the evaluation of
the technical needs shows something else, then even the measurement was wrong, even if
there is a difference of image (be it positive for competitor, or negative for the company
product) which affects the consumer perception. For example, customers say they give a
great importance to family and in the meantime, the competitive evaluation shows that
these aspects are not accomplished. The establishment of a target regarding this need will
satisfy the consumer need and will offer an advantage against the competitors products.
6. Selection of the technical needs to be modified in the process
In this stage there are identified the technical requirements which have a strong link with
the customer needs, that are considered sale key points. In the rest of the process, the
customer voice will be taken into account. Features not being considered critical dont need
a greater attention, for example, the key factors in a fitness Centre are: the program, the
equipment, the fee and the access to the Internet.
The six stages are just the beginning of the QFD process. There are used three houses of quality
to develop the main parts of the customer needs, the process plan and the quality control.
The second house is very similar with the first, but it refers to the subsystem and
components.
The technical needs of the first house of quality are described in detail (fig.3.).
Fig. 3. The four quality houses fill them in
Legend:
1. Clients needs;
2. Technical needs;
3. Components characteristics;
4. Process operations;
5. Quality control plan.
1
2
2
3
3
4
4
5
Quality Assurance and Management
64
At this moment, the target values, function and aspect are to be settled. For example, the
program of a fitness Centre could be partaged into: program for children, for family, etc.
each with their specific needs and therefore, each with its own house of quality.
In the field of production, the majority of the QFD activities are represented by the first two
houses which are displayed by developing the product and the engineering function. The
next stage refers to needs surveyors and line operators.
In the third house, the process plan makes the link between the characteristics of the
components and the key operations. That makes possible the passage from the plan to the
application.
In some cases, there are used more simple houses of quality, which exclude the competitive
analysis. For example in the health national organizations, competition doesnt interest
anybody.
3. Optimizing the activity of S.C. ELDA MEC S.R.L. through the application of
the Quality Function Deployment method
QFD was applied within ELDA MEC SRL Constanta in order to establish a product, which
optimally corresponds with the dairy products consumers.
3.1 Presentation of S.C. ELDA MEC S.R.L. Constanta
S.C. ELDA MEC S.R.L. is a company with limited responsibility, with a completely
private capital, established in 1996; activity field: production and commerce of dairy
products.
The companys headquarters is on Dumbrava Rosie Str. no 5, Constanta.
Work points the companys headquarters and, respectively, in Topraisar, Constanta
County, Romania (starting from July 2007).
In the purpose of carrying out this activity, the company owns fabrication licenses for the
following products:
Milk for consumption;
Acidophil products;
Fresh cow cheese, creams;
Sour cream for consumption and whipped cream;
Hard paste cheeses.
The products made and commercialized by Elda Mec are presented in table 1.
Currently, the unit is in conformity with European sanitary-veterinary norms regarding the
production on a national level (L 41) and is carrying out the program for preparing the
prime materials suppliers for export quality.
Presently, the company has 15 employees, who assure a good functioning for the current
production capacity.
The Use of Quality Function Deployment in the Implementation of the Quality Management System
65
Nr.
crt.
Product name Pakage Quantity
1. Fat yoghurt PET bottle 900 g
2. Fat yoghurt PET bottle 2 kg
3. Sana PET bottle 900 g
4. Yoghurt cream PET bottle 900 g
5. Diet yoghurt PET bottle 900 g
6. Fresh cow cheese Plastic casserole 500 g
7. Fresh cow cheese Plastic bucket 5 kg
8. Fgra cheese Plastic casserole 250 g
9. Sour cream 25% fat Plastic casserole 450 g
10. Sour cream 20% fat Plastic casserole 450 g
11. Sour cream 20% fat Plastic bucket 5 kg
12. Cow telemea Plastic box 15 kg
13. Delicatesa Elda Plastic bucket 8 kg
Table 1. The products made and commercialized by Elda Mec SRL Constanta, Romania
3.1.1 The analysis of the marketing environment
The consumption market of these products is in continuous expansion due to the curing
qualities of the dairy products. An important factor in this growth is represented by The
Alliance for Educational Milk Advertisement, a nation-wide program for informing the
people about the benefits of consuming milk and industrially-processed dairy products.
This program informs people about the benefits of milk and industrially-processed
dairy products rather than the unprocessed ones, about the increase of hygiene-sanitary
quality and nutritional value through industrial processing.
This type of products is available to any consumer, milk being a food rich in calcium
and phosphorous which decisively contributes to the growth and upkeep of the bone
system and a good functioning of the muscles and nervous impulses transmission.
Moreover, milk contains the vitamin complex B (B1, B2, B6, B12), which has an
important role in the prevention of fatigue and nervous states.
Given the fact that, on the Constanta market, there are not that many companies to
cover the demand for fresh dairy products, S.C. ELDA MEC S.R.L. has the opportunity
to impose itself among the other competitors, because it offers higher quality products
to the consumers.
For distribution, S.C. ELDA MEC S.R.L. uses its own transportation, equipped with
storage installations for optimal product storage.
S.C. ELDA MEC S.R.L. distributes its products especially through the retail network,
together with the wholesale, having sealed contracts with the main local trade chains
and with some large public alimentation unit chains, restaurants with commercial
vocation on the whole Romanian seashore. Moreover, the company intends to build its
own trade network, in time.
The consumers demand regarding the markets offer:
The production of milk and dairy products has risen by 95% in 2000-2009, while the
annual average consumption of milk and dairy products has grown with 19% in
the same period.
Quality Assurance and Management
66
It is important the fact that, in the last years, the consumers are orientating
themselves more and more towards high quality products, which offer
consumption safety and the natural characteristics of milk. Thus, the yoghurts and
cheeses obtained through pasteurizing technological processes, followed by
implanting of carefully selected bacteria and molds. The products obtained by the
company respects the consumers norms regarding quality and taste. Furthermore,
after the implementation of the current project, the product diversity and quality is
to be improved.
In conformity with the Nielsen press statements and those of the Romanian Milk
Industry Patronal Association, the yoghurt and sour cream segment is the only one
which has grown by 3-5% even in the crisis periods.
In conformity with Nielsen, the dairy product buyers choose, mostly, hypermarkets
(over 40%) when buying these products, followed by supermarkets (20%),
discounters (15%) and local shops (10%).
The yoghurt segment remains, for the Romanian consumer, an item in the daily
basket = an item present in day to day consumption of each Romanian household.
What regards the milk and dairy products demand, we can say that, while under a
certain price level, it is inflexible. However, it is sensible to the growth of the
consumers incomes, proof being the consumption evolution in the last years.
3.1.2 SWOT Analysis S.C. ELDA MEC S.R.L. Constanta
Strengths
High quality products;
The implementation of the HACCP
Plan for most of the manufactured
products;
Varied product types equipment,
orientation towards traditional
products;
Intermediate price situation, between
economy and middle range
Safe and secure, own distribution
Location (are with high economic and
touristic potential)
Weaknesses
Fluctuating personnel
Low number of distributors
Poor product advertisement
The lacking of a performant complete
laboratory analysis;
Opportunities
The opening of new commercial units
chain and units for public alimentation,
especially restaurants with commercial
vocation;
Multiple possibilities for assortment
diversification
Accessing nonrefundable funds for
development
Threats
Direct competition
EU norms imposed to Romania in
January 2007
The fluctuation of the companys
employees, especially after joining
the EU
The Use of Quality Function Deployment in the Implementation of the Quality Management System
67
3.1.3 Activities proposed for completion within the firm after the SWOT Analysis
Widening the product equipment, as to fulfill the demands of as many consumers as
possible
Fabrication of new products based on traditional Romanian recipes
Intensification of the advertisement actions regarding the products made by ELDA, of
the Elda Mec company in general
Increasing of the distributors number , and that of the distribution channels
Expansion of the market coverage; selling the products to as many commercial chains
as possible (national and international)
Commercialization of some products (Yoghurt, Sana) under other distributors brand
Accessing nonrefundable funds so that the whole production-selling process responds
to the EU norms requirements
Increasing the investments towards establishing a performant laboratory analysis
3.1.4 S.C. ELDA MEC S.R.L. Constanta objectives
To increase production capacity, at the same time following the reaching and
maintaining of a high quality level;
To certify the Quality assurance system in conformity with ISO 9001 and the HACCP
Plan (Hazard Analysis. Critical Control Points) in the new production unit.
To implement the ISO 14000 environment standards.
To satisfy the demands (needs) of the clients through the assurance of products which
are as diverse as possible and of a high quality.
To inform and educate the consumers in order to differentiate natural products,
respectively the dietetic ones from the other products from the same array.
To accentuate within the advertisement campaigns the quality difference and the
therapeutically qualities of the natural dietetic dairy products in comparison with other
dairy products available on the market.
To increase the market share in the Constanta area currently we have a share of over
40% in the city of Constanta, being found in numerous supermarkets, Selgros and Mega
Image.
To increase, on a yearly basis, the sales with at least 10% in order to, in up to 3 years,
make the ELDA firm known through its quality not only on the Dobrogea market, but
on the whole Romanian one and even in some European Union markets.
3.2 Applying the QFD method within ELDA MEC S.R.L. Constanta
The application of the QFD method at the firm Elda Mec S.R.L. Constanta, Romania aims to
establish the optimal ratio between the functions and the quality characteristics of products
in order to optimal correspond to the customers requirements.
The analyse focus on the 3 products presented as follows:
Fat Yoghurt;
Low fat yoghurt;
Cream of yoghurt.
Quality Assurance and Management
68
The quality characteristics of the mentioned products are found in the product papers
below:
Fat Yoghurt product paper
Made from: cow milk;
Types: fat;
Organoleptic and physic-chemical characteristics:
Characteristics Fat
Aspect and consistency: Thinner consistence, without zer-eliminating
gas bubbles
Color: White, milk color or a slightly yellow tint
Smell and taste Yoghurt specific, pleasant, a bit bitter, without
foreign taste or smell (sour, moldy).
Fat, %, minimum 2.8
Dry substance, %, minimum 9.0
Acidity, dgr. T 75 140
Proteic substances, %, minimum 3.2
Delivery tempterature, dgr.C, maximum 8
Whey, %, maximum 5
Quality control, marking, storage, transport:
Lot establishment: lot = max 5000 kg, yoghurt of the same type, package, presented at the
same time at verifying.
Packaging: 900g PET bottle, 500g PET bottle, 2 kg PET bottle and 5 kg bucket.
Marking: marking or labeling with: factory brand, product name, type or fat content, net
weight, expiration date, fabrication standard.
Storage: clean refrigeration spaces clean, at 2-8 dgr. Celsius.
Transport: clean, dry covered vehicles, at 8-12 dgr. Celsius.
Consumption indications: it can be consumed by all consumer categories, which do not have
allergies or medical contraindications regarding the products components.
Low fat yoghurt product paper
Made from: cow milk;
Types: light;
Organoleptic and physic-chemical characteristics:
Characteristics Easy
Aspect and consistency: Thinner consistence, without zer-eliminating
gas bubbles
Color: White, milk color or a slightly yellow tint
Smell and taste Yoghurt specific, pleasant, a bit bitter, without
foreign taste or smell (sour, moldy).
Fat, %, minimum 0.1
Dry substance, %, minimum 8.5
Acidity, dgr. T 75 140
Proteic substances, %, minimum
Delivery temperature, dgr.C, maximum 8
Whey, %, maximum 5
The Use of Quality Function Deployment in the Implementation of the Quality Management System
69
Quality control, marking, storage, transport:
Lot establishment: lot = max 5000 kg, yoghurt of the same type, package, presented at the
same time at verifying.
Packaging: 900g PET bottle.
Marking: marking or labeling with: factory brand, product name, type or fat content, net
weight, expiration date, fabrication standard.
Storage: clean refrigeration spaces clean, at 2-8 dgr. Celsius.
Transport: clean, dry covered vehicles, at 8-12 dgr. Celsius.
Consumption indications: it can be consumed by all consumer categories, which do not have
allergies or medical contraindications regarding the products components.
Cream of yoghurt product paper
Made from: cow milk;
Types: fat;
Organoleptic and physic-chemical characteristics:
Characteristics Easy
Aspect and consistency: Thinner consistence, without zer-eliminating gas
bubbles
Color: White, milk color or a slightly yellow tint
Smell and taste Yoghurt specific, pleasant, bitter-sweet, without
foreign taste or smell (sour, moldy).
Fat, %, minimum 2.8
Dry substance, %, minimum 8.5
Acidity, dgr. T 75 140
Proteic substances, %, minimum 7
Delivery temperature, dgr.C,
maximum
8
Whey, %, maximum 0.5
Quality control, marking, storage, transport:
Lot establishment: lot = max 5000 kg, yoghurt of the same type, package, presented at the
same time at verifying.
Packaging: 900g PET bottle.
Marking: marking or labeling with: factory brand, product name, type or fat content, net
weight, expiration date, fabrication standard.
Storage: clean refrigeration spaces clean, at 2-8 dgr. Celsius.
Transport: clean, dry covered vehicles, at 8-12 dgr. Celsius
Consumption indications: it can be consumed by all consumer categories, which do not have
allergies or medical contraindications regarding the products components.
QFD method was selected as an instrument for planning and development of the quality
functions in conformity with de quality characteristics expected by customers and to permit
the achievement of this project.
Having in view to develop the methodology, there was formed a multidisciplinary team,
whose members are involved in the departments of production-quality, acquisition and
marketing/commercial.
Quality Assurance and Management
70
In a first stage, an inquest was developed in order to establish the functions of the three
products from the yoghurt family of products, expected by the customers and their
importance, based on a questionnaire, containing the following questions:
1. Do you know the products offered by S.C. ELDA MEC S.R.L.?
2. If the answer is Yes, name three products.
3. Which is/are the products that you frequently buy?
4. Which are the characteristics you appreciate for the three products named above?
5. Do you buy/use the yoghurt from the S.C. ELDA MEC S.R.L.?
6. If Yes, which kind of yoghurt and which are the characteristics of item selected?
The objective of this team is to discover which are the quality characteristics of the products
from the yoghurt category which respond better to the customers expectations, in order
to be sustained and developed in the benefit of the clients.
Taking into account the consumers of the firms products opinion, it was observed the
following correlation between the function and characteristics of products:
The nutritive function was associated with the characteristics: content of fat and
content of proteins;
The sensorial function with the characteristics: appearance, firmness, smell and taste;
The hygienically-sanitary function: temperature at distribution and the presence of foreign
items;
The aesthetic function associated with the packaging system;
The commercial function trade mark and labelling system.
Using the questionnaire it was identified the degree of importance of the requirements,
granted by customers, with points from 1 low important to 5 very important, as follows:
Crt.
No.
Needs (expectations) of the
customers
Defined like Points
granted
1 Nutritional contribution 1. Content of fat %
2. Content of proteins %
5
3
2 Sensorial needs satisfaction 3. Appearance and firmness
4. Smell and taste
4
5
3 Safety in consumption 5. Temperature at distribution
6. Presence of foreign items
3
4
4 Comfort and commodity in
use
7. Packaging system
8. Tightness
3
4
5 Information 9. Trade mark
10. Labelling
3
3
Table 2. Hierarchical values of the customers appreciations
The degree of covering the requirements through characteristics was evidenced with the
relation matrix, with the following significance:
* - Very low cover (possible)
o - Low
# - Very strong
The Use of Quality Function Deployment in the Implementation of the Quality Management System
71
Nutritional contribution Content of fat %
#
Content of proteins %
*
Sensorial needs
satisfaction
Appearance and firmness
#
Smell and taste
#
Safety in consumption Temperature at distribution
o
Presence of foreign items
#
Comfort and commodity
in use
Packaging system
o
Tightness
#
Information Trade mark
o
Labelling
o
Fig. 4. The requirements cover matrix
Consequently to the definition and measurement of the consumers needs, the QFD team
establishes that the respondents grant a major importance to the fat content, appearance
and firmness, tightness, presence of foreign items and smell and taste. That fact
proves the necessity to sustain and develop further the product Fat yoghurt, otherwise,
the product the best positioned on the market. The study demonstrated also the necessity to
pay a greater attention to the trade mark and labelling systems.
Further on, the degree of correlation between the selected characteristics was evidenced in
the correlation matrix.
The degree of correlation between the selected characteristics demonstrated by the QFD
team that the majority of characteristics are sustained each other but it is necessary to
improve the characteristics referring to the commodity and comfort in use, respectively the
shape of the package, temperature at distribution, trade mark, labelling and the possibility
to correlate the ratio price/quantity.
Taking into account the result after the consumers investigation, the QFD team proposed
the realization of a new package with improved characteristics that consequently assured a
significant growth of sales for the analysed products, especially for the article fat yoghurt.
4. Conclusions
Firms from all domains face the difficulty due to the modification more and more rapid of
the requirements and expectations of the customers which vary significantly also between
the different market shares.
The technical progress, the more and more important complexity of the production and the
greater and greater pressure of innovation represent only several of the requirements in
increasement that firms face.
QFD must contribute to the effective and efficient transformation of the customers
requirements in the capabilities specific for a firm.
Quality Assurance and Management
72
QFD method could be used everywhere the customers requirements (internal or external
customers) must be transformed in specific capabilities for the firm, like in
development/engineering, production or logistics.
In order to understand the QFD philosophy is supposed the basic knowledge of the quality
management. In this way are enabling those who intend to become initiated in taking
decisions: if QFD must be introduced and where precisely and which would be the
successful procedure.
The mixed presentation of the concepts, principles and examples stimulate the
understanding of the method and clarify the fact that QFD could be used in the
consumption of goods area, in investments and even in the services one. To ensure the
success of application is recommended a pilot-project with the assistance of an experienced
moderator. The quality development must be sustained from the beginning till the use
(products or services), intermediated by the clients. That means the definition, development,
building, distribution, installation and if necessary some added services provided in order
not only to satisfy but delight the customer also.
The chance to survive in competition is conditioned by the acceptance of the transformation.
Nowadays firms must apply methods and procedures in order to develop and plan in
conformity with the customers requirements. As a quality development method, QFD is
oriented to the customer and involve the management in the orientation towards the
consumers process.
Orientation towards consumers is at the moment crucial for all the firms. But for all firms
that the customers requirements are continuously changing, faster and faster and the
importance for different groups vary quite important.
For SMEs an efficient and certified quality system in conformity with the international
standards represents a real chance to survive in competition. Thus, the little business could
be enabled to:
Satisfy a necessity or accomplish a well defined objective (customer satisfaction);
Produce in conformity with standards and specifications;
Comply with the environment exigencies;
Obtain competitive prices;
Obtain benefit.
With these purposes, the firm must:
Understand, know and evaluate all the requirements, expectations and necessities of
the potential customer;
Design the quality of products and services;
Achieve the quality of all processes, products and services in conformity with the initial
project;
Evaluate permanently the satisfaction degree for all the real customer;
Assure a post-sale assistance, suitable for all customers.
As in all these stages could appear gaps, generating unconformities non quality it must
be prevented or eliminated by correction.
The Use of Quality Function Deployment in the Implementation of the Quality Management System
73
In this manner could be contradicted the prejudice very speed that the quality costs (control,
evaluation, correction). In fact, costs of the non quality, a well done job from the beginning
and prevention permit the obtainance of quality with minimal costs.
5. References
Akao, Y., Kogure, M., Yasushi, F. (1983). Seminar on Company Wide Quality Control
and Quality Deployment. October 31 November 3, 1983, the Arlington Park
Hilton, Chicago. Sponsored by the Cambridge Corporation and c-sponsored by
ASQC
Akao, Y. (1997). QFD: Past, Present, and Future; International Symposium on QFD 97
Linkoping,
http://stat.haifa.ac.il/~quality-study/4306/ReadingMaterial/QFD_ History.pdf
Baloiu, L.M., Frasineanu, I. (2001). Gestiunea inovatiei, Economica Editure, ISBN: 973-590-
542-6, Bucuresti, Romania
Condrea E., Stanciu A. (May 2006). QFD Method, in Tribuna Economica Magazine nr.5/2006,
ISSN 1018-0451, pp.56-57, 2 pg., Bucuresti, Romania
Condrea, E., Stanciu, A.C. (2008). Quality Management, Lumina Collection, Libertatea
Panciova Editure - Novi Sad, Serbia, ISBN 86-7001-166-2, Printed by SC INFCON
SA Constanta, Romania
Condrea E., Aivaz K.A., Muhcin S., Nicodim L. (2008). New Evaluation Instruments on the
Quality Management System, Conferina internaional TEHNONAV 2008. The 6th
edition of the International Conference on Naval and Mechanical Engineering New
technologies for future clean mobility and environment, organized by the Faculty of
Mechanical Engineering, Ovidius University Constana, 22-24 mai 2008. The
paper was publicly presented at Materials technologies and production management
and published in the volume TEHNONAV 2008. The 6th edition of the International
Conference on Naval and Mechanical Engineering New technologies for future clean
mobility and environment, Ovidius University Press 2008, ISBN 978-973-614-447-9,
pp.579-583, 5 pg., Constanta, Romania
Evans, J.R. and Lindsay, W.M. (2005). The Management and Control of Quality, Sixth
Edition, ISBN-13: 978-032-420-223-6, Ohio: South-Western
Olaru, M., Isaic-Maniu, Al., Lefter, V., Pop, A.N., Popescu, S., Dragulanescu, N., Roncea, L.,
Roncea, C. (2000). Techniques and instruments used in quality management,
Economica Editure, ISBN 973-590-256-7, Bucuresti, Romania
ReVelle, J.B., Moran, J.W., Cox, C.A. (1998). The QFD Handbook, John Willey & Sons, ISBN
047-117-381-9, New York, USA
Shigeru, M. and Akao, Y. (1978). Quality Function Deployment: Company Wide Quality
Approach (in Japanese), JUSE Press
Shillito, M.L. (1994). Advanced QFD: Linking Technology to Market and Company Needs,
Wiley-Interscience, ISBN 978-047-103-377-6, New York, USA
Shillito, M.L. (2000). Acquiring, Processing, and Deplying: Voice of the Customer, CRC
Press, ISBN 978-157-444-290-8
Terninko, J. (1997). Step-by-step QFD (Quality Function Deployment): Customer Driven
Product Design, CRC Press, ISBN978-157-444-110-9
Quality Assurance and Management
74
Vachette, J.E. (1990). Amlioration continue de la Qualit, Editeur dOr, ISBN 270-811-151-5,
Paris, France
5
Quality Assurance in Education
Geoffrey Doherty
Emeritus Professor
UK
1. Introduction
The purpose of this chapter is to give an overview and critique of Quality Assurance (QA),
its role, function and effectiveness as practised and researched in education organisations.
To place contemporary QA in its historical context, some well-trodden ground will be
revisited. There is nothing new about government and other authorities inspectorial interest
(some of it demeaning) in the effectiveness of teaching. Despite this, terms such as quality,
quality assurance and management are still hotly contested, particularly in Higher
Education (HE) since the increased focus on accountability over the last three decades.
Much antagonism both overt and covert is shown towards those responsible for quality
amply demonstrated by letters and occasional articles published in the educational press.
This is a fact of life in universities, university colleges, further education (FE) colleges and
schools, though to a less extent, perhaps, in schools and FE Colleges. What follows is an
attempt to come to grips with some of the reasons, historical, conceptual, methodological
and cultural.
2. An historical perspective
Generally speaking, when enterprises embark on quality improvement they start with
inspection a form of quality control (QC) a reactive approach which identifies a
weakness, non-compliance or whatever and endeavours to correct it ensuring it will not
happen again. In outcome terms, of course, the damage has been done. The next phase is to
move on to quality assurance (QA) a proactive approach which attempts to identify
problems and deal with them immediately, or even better prevent them from happening at
all. The inspectors in white coats are replaced by problem solving groups, usually with some
form of quality leader or leaders. Both QC and QA can be, and often are, led from the top
down i.e. they are managerial initiatives, clearly aimed at bringing down costs, improving
processes, profitability and so on.
Obviously, QC is immediately applicable to manufacturing, where the outcomes are
products of one kind or another. However, the fact is that quality assessment was applied to
education before the industrial revolution was at its peak. In 1833 a Government Grant was
given for elementary education provided to poor children by some church and non-
denominational bodies. In 1837 the Government appointed the first school inspectors to
monitor the effectiveness of the grant. So began Her Majestys Inspectorate (HMI). Two key
characteristics of inspection are clear from this elementary beginning: firstly, the importance
Quality Assurance and Management
76
of size and, secondly, the concern for value for money. Enough was being invested in
schools to make the appointment of two inspectors worthwhile. The passing of the Foster
Education Act in 1870 brought state elementary education for all and with it the setting up
of School Boards, an enlarged inspectorate and the introduction of the infamous Revised
Code payment by results. Teachers pay depended on the successful achievement of
examination results including tests of reading and mental arithmetic. In the United
Kingdom (UK), these small beginnings have developed into The Office for Standards in
Education (Ofsted) which is now responsible for Childrens Services, Early Years, Primary,
and Secondary Schools, Sixth Form Colleges and Colleges of Further Education. It employs
over 400 HMIs, though inspections are mostly carried out by some 2000 Additional
Inspectors (AIs)commissioned by HMI, but employed by privately owned companies
Regional Inspection Service Providers (RISPs).
The huge expansion of business and manufacturing in Europe and the USA during the
nineteenth and twentieth centuries encouraged interest in methods of improving
production, the most interesting and influential of which, was the work of F. W. Taylor, an
American engineer who invented the concept of Scientific Management (Taylor 1911),
which analyses what workers do, how they do it and how long it takes the basis of
contemporary, highly sophisticated time and motion studies, aimed at measuring each
element of production tasks and reducing them to a minimum of repeatable actions. Taylor
became the first independent Management Consultant and his ideas had a tremendous
influence on the organisation of manufacturing during the early part of the twentieth
century. However, its present relevance is that this can be seen as an early form of quality
control, the links between this approach and Statistical Process Control (see below in
Quality Tools) being obvious. Incidentally, the law of unintended consequences brought
opprobrium to both Taylorism and Payment-by-Results. On the one hand, the resulting de-
socialisation and de-skilling of the work force and on the other the negative effects on
education of teaching-to-the-test did nothing for the successful achievement of the
outcomes.
Consumers have always been interested in the quality of what they consume and the
involvement of external bodies in taking responsibility for quality control can be traced back
a long way certainly to the Medieval Guilds. The British Standards Institute (BSI), now a
huge international business and owner of the internationally recognised kitemark dates back
to 1903. These days, the BSI works in close collaboration with the more recently established
International Organisation for Standardisation (ISO). Achieving a standard, aimed at
ensuring potential customers that quality is assured, is valued by business and
manufacturing enterprises which are driven by the imperatives of market survival,
competition, and the responsibility of making profits for their shareholders. Improving
market share by driving up quality and driving down costs are very attractive goals,
particularly for large firms. Per se they have nothing to do with education. These elements
quantitative measurement, control and compliance with their implied threat to autonomy
are what cause academics and teachers to be extremely suspicious of quality systems in
general.
The Second World War accelerated the need for effective quality control it is a good idea to
ensure that the bombs explode when they are dropped, that the wings dont fall off your
aircraft in a dogfight, that your rifle is a reliable weapon etc. Significant contributions to the
Quality Assurance in Education
77
effectiveness of the USAs war machine were made by two American scientists and
engineers Walter A. Shewhart and W. Edwards Deming. Their influence on the
development of Total Quality Control (TQM) and Total Quality Improvement (TQI) has
extended far beyond engineering processes. Shewhart was the originator of Statistical
Process Control (SPC) (Shewhart 1939; Neave 1990; 1993) and Deming extended statistical
methods to non-manufacturing as well as manufacturing enterprises (Lambert, 1993) and
became one of the original quality gurus. Even more importantly, perhaps, he succeeded in
conveying the statistical control methods in such a way that the worker on the shop floor
could understand and use them. Unfortunately, after the war, American industrialists
showed little interest in Shewhart and Deming. However, Japanese industrialists did. They
invited them and another American, J.M.Juran a quality management consultant, to visit
Japan and teach them how to make high quality products.
The Japanese did not spurn the message. During the following decades, their industrialists
honed the tools, becoming leaders of the industrial world and competing annually for their
W. Edward Deming quality award. Their best-known leaders are: Ohno, (1992); Ishikawa,
(1986); and Taguchi (!986) They outline the quality tools and methods (see below), of which
the most frequently used are: control charts, flow charts, paired comparisons, cause and
effect analysis, force-field analysis, histograms, pareto analysis, quality function deployment
(QDF), kaizen, quality circles and small step progression. The western nations were not
swift to emulate the Japanese. However, by the seventies alarm bells were ringing. Firms
such as Toyota, Nissan, Honda, Mitsubishi, Panasonic, Technics and Toshiba were making
inroads into the automobile and brown goods markets. By the eighties other consultants
were following in the footsteps of Deming and Juran notably: Crosby; Moss Kanter; Peters
& Waterman. Large management consultancies (e.g. A. T. Kearney) were becoming
involved, and at least one firm, Rank Xerox, was mounting comprehensive and
sophisticated TQM internal training programmes. Development over the last two decades
has been exponential. Heavily based on TQM and TQI concepts and methodologies are Lean
Management Systems and Six Sigma (originally developed at Motorola in 1986). The British
Quality Foundation (BQF) was founded in 1943, more or less at the same time as the
European Quality Foundation (EQF). Both institutions actively promote the European
Quality Foundation Model (EQFM), a business excellence model to which all enterprises,
large or small can aspire education included. There is a much prized annual award, not
unlike the Baldridge Award, founded in the USA in 1981 and subsequently (since 1991)
administered by the American Society for Quality (ASQ). Thus the development of quality
assurance systems is now thoroughly embedded in private sector enterprises throughout
the world.
There have been to some extent similar developments in state education systems but
nothing quite so dramatic. Education organisations are notoriously anxious to preserve the
status quo. Change is slow, regarded with deep suspicion and usually resisted the time is
never ripe. Nevertheless, change does happen, particularly when governments are footing
the bill. During the 20
th
Century in the UK, the school leaving age has been raised from 12 to
14; 16; and now 18. There are thousands of primary and secondary schools in the UK, the
annual cost of which has risen to billions of pounds. This is replicated throughout the
civilised world: hence government and, indeed, taxpayers interest in having some
assurance that their monies are being well spent. Ofsted-style school inspections are still
generally the norm. Though there are considerable variations in responsibility and style
Quality Assurance and Management
78
between nations as, for instance, between the UK, Government controlled (via Ofsted) and
RSIP conducted and the USA, where school inspection is contracted out to wholly private
enterprises such as the American Society of Home Inspectors or even Tribal, a UK based
provider.
In contrast, Higher Education (HE) remained relatively untouched by Government
interference until some years after World War 11. In comparison with today, universities
were tiny. Apart from Oxbridge, London and the Red-bricks (the large civic universities),
undergraduate numbers were counted in hundreds, not thousands. Less than three percent
of the post-eighteen population attended universities, making them truly elitist institutions.
They were fee-paying, though some scholarships were available, including highly sought
after State Scholarships. Government interest was represented by the University Grants
Committee (UGC), but it was not until 1946, after the Education Act of 1944 encouraged
significant increases in student numbers, that it assumed some responsibility for planning
and development. As education costs rose, so did Government concern. In 1969 the then
Minister of Education, Shirley Williams, put down 13 discussion points with the intention of
encouraging economies in the university system. They were rejected out of hand by the
Committee of Vice-Chancellors and Principals. This was the beginning of erosion of trust
between Government and the HE system. The argument that the UGC had acted as an
effective buffer between the Government and universities, mitigating financial cuts and
more extreme Government policies, was well put by Elton (1992). However, erosion of
trust could be applied to the education system as a whole, not just the universities. In 1976
James Callaghan, the Prime Minister, made his famous Ruskin College speech initiating the
Great Debate about education. The root concerns were the maintenance of educational
standards, education including HE and employability and the provision of value for
money. These concerns motivated and, indeed still motivate, both left- and right-wing
governments to extend more and more direct control via the use of performance indicators,
quality assurance and audit to HE. The UGC was replaced by the Higher Education
Funding Council (HEFC) in 1987. This became the Higher Education Funding Council for
England (HEFCE) in 1992.
In 1997 The Quality Assurance Agency (QAA) was set up as an independent, not-for-profit
company. It is responsible for academic standards and quality in England and N. Ireland
and is also separately contracted to Scotland and Wales and will accept advisory roles and
take on overseas contracts. The QAA methodology will be discussed in a later section;
however, its role and function is not loved by academics. For a detailed and comprehensive
critique of the perceived flaws in the methodology, see Laughton (2003). Government
concerns have not changed very much over the first decade of the 21
st
Century. Suspicions
that the QAA lacks the necessary teeth to require improvements have been rife since the
1970s.
There are variations between national approaches to QA. The USA favours accreditation by
private agencies as do many Nordic countries, including Germany. Others have a higher
degree of Government involvement, sometimes, as with the UK and Ireland, through
Government funded, but independent agencies such as the UKs Quality Assurance Agency
(QAA) (Kis, 2005: Williams, 1993). Occasionally other stakeholders, e.g. students, graduates,
employers, are involved as committee members or observers. Governments in the West,
particularly in the UK and USA remain critical about school and HE performance, being
Quality Assurance in Education
79
particularly concerned about declining academic standards, whilst emerging economies like
China, Korea, Brazil and Chile commit more and more resources to education, especially
HE, which they perceive as essential to the continued growth of their economies. For
instance, despite their political and economic difficulties, the Arab States, identifying
knowledge as a key element in overcoming poverty, improving peoples capabilities and
developing a competitive economy, have embarked on a comprehensive QA programme for
universities. They are using QAA methodology (UNDP, 2006).
Negative reactions from academics and teachers in general to Government inspired external
quality control have been consistent over the years. They are not confined to the UK.
Academics repeatedly refer back to the loss of trust between academia and Government
(Brennan and Silver 1992; Johnston 1992; Loder 1992; Hodges 1993) and also to the
intractable conflict between academic values and the managerial ideology which underpins
the QA approach (Gorbutt et al 1991; Becher 1992) The conflict is ongoing and regularly
aired in The Times Higher Education (THE) for instance McNay (2006) on the counter
productive results of QA processes or Ashworth (2009) on the irrelevance of the QAA. Thus,
whilst QA methods are embedded in industry and commerce, they are heavily criticised and
at best only reluctantly tolerated in education, especially in HE in the UK. Educationalists
have become increasingly antagonistic towards what they perceive as the crude materialist
and managerial values of policy makers who, in turn, have become increasingly exasperated
by what they perceive as the educationalists endless capacity for talk without action,
rationalisation without results. Fred Inglis, Emeritus Professor of Cultural Studies at the
University of Sheffield encapsulated the mood:
There are no books on my desk, only quality papers. These are the dry thoughts of
their dry season. Let virtues be forced upon us by their impudent crimes. (1993).
3. Concepts and definitions
Before discussing quality systems, it would seem important to know what we mean by
quality. Unfortunately this is not as straightforward as it may seem. One of the reasons for
the slow development of and resistance to QA in education is that academics are, of course,
trained to ask questions, to be sceptical, if not challenging. In academia, quality has been a
contested concept since ancient times, for instance:
Goodness is not the same as being, but even beyond being, surpassing it in dignity and
power. (Plato c. 380 BC)
V.
Any kind of excellence renders that of what it is the excellence good and makes it
perform its function well. (Aristotle c. 380 BC)
Platos definition is utopian something which has quality is closer to its ideal form than
a similar thing that is of poorer quality. Aristotle is defining quality as fitness to purpose.
The first is metaphysical: it cannot be measured; the second is realistic: it can be measured,
so Aristotle might be regarded as the father of modern quality systems. This is not to say
that fitness to or for purpose is not still contested. A favourite writer of academics on
quality is Pirsig (1976). His most quoted claim is:
Quality Assurance and Management
80
Quality is, how do you know what it is, or how do you know it even exists? If no one
knows what it is, then for all practical purposes it doesnt exist at all. But for all practical
purposes it does exist.
This is followed by a couple of hundred pages of fascinating metaphysical discussion
attempting to gain some grasp of this elusive concept. Metaphysics, unfortunately, is of little
immediate, practical use in assuring the quality of a product whether it is an automobile, a
school curriculum or a research degree; which is not to say that quality experts totally reject
the elusive, subjective element in the experience of satisfaction. For instance, a past Chief
Inspector of Schools commented:
Quality is quite important and I, like others can recognise it when I see it
Maradonnas second goal against England in the 19
th
World Cup... (Melia, 1990)
or, perhaps even more surprising, given his considerable influence on the successful
development of the Japanese model of excellence in the West, Tom Peters (1990): Quality is
all about:
...getting the customer to say WOW!
This simplistic, apodictic, definition, I-instinctively-know-it-when-I-see-it might be
attractive but, like the utopian definition, it is subjective and therefore unmeasurable.
Fitness to purpose, however, is a much more useful concept, especially if purpose can be
defined as satisfying the customer. This is an easily acceptable concept for manufacturers.
Generally speaking, if consulted, as market researchers aim to do, customers universally
want well-designed, well made products at the cheapest possible price. The BSI/ISO Quality
Management Standard (ISO9001 Series) quite clearly defines quality as ...satisfying
customer wants and needs,* A company, of course, must further clarify this in the context of
its mission, aims and objectives. The Japanese were clear from their original approach to
Deming and Juran that they wished to transform the quality of their manufacturing
industries so as to gain a world-wide reputation with customers for excellence. This they
successfully achieved and the rest of the world has followed their lead. It is interesting to
note in passing, that the Japanese seem to have avoided philosophical arguments about
quality by concentrating on outcomes. Improve the process and the quality will improve
itself is the Japanese approach TQI, perhaps, rather than TQM. This is not to say that their
gurus do not have interesting contributions to the quality debate. Taguchi (1986), for
instance, exhorts designers to concentrate on the differences between species and product
quality. There is no point in arguing about species when we should be focussed on products
in simple terms to attempt argue that a Bentley is a better quality motor car than a Mini
shows a total misunderstanding of quality. The designer should be aiming to make the
Bentley the best high-quality motor-car of its kind, and the Mini the best popular motor
car. This places the Japanese approach firmly in the fitness to purpose camp. The
implications for different kinds of qualifications should be obvious.
However, educationists at every level have, understandably, rejected out of hand the idea
that children or students can be regarded as products and continue to resist the customer
paradigm. They ask: Who is the customer? Claiming that it is impossible to identify any one,
single customer as everything depends on the context. Can children or students be
described as customers? Educationists are agreed that teaching and learning is a transaction
Quality Assurance in Education
81
to which the learner makes a significant contribution, indeed, where deep learning takes
place, the most important contribution, so that in the most successful transactions, the
teacher is also a learner. Is the teacher the students customer? What about the post-graduate
researcher who provides his/her professor with data etc. for the next paper or book?
Similarly, a parent, a Professional Body, a Local Authority, a Government, a Research
Council or some other contractor could all be regarded as customers. Clearly, they have
different and conflicting requirements. There is no shortage of literature on the subjects of
either quality in education or the nature of the customer or consumer, see : the whole of the
British Journal of Educational Studies(1992); Bookman (1992); Barnett (1992); Pollitt (1992);
Harvey et al (1992); Harvey and Green (1993); Richards, (1994); Kis op cit.(2006); Hackett
(2011); Watson (2011). The basic reservations about the intangible, elusive non-measurable
characteristics of quality in education and the range of different customers have changed
very little since the 1990s. Harvey and Green, whose work has had considerable influence
both nationally and internationally opted for an excellence model of quality and preferred
the descriptor stakeholder to customer. Kis op cit. (2006) comments that (a) the excellence
model sometimes used in conjunction with fitness-to-purpose, zero defects or value for
money is now widely used, globally and that, whilst consumerisation is equally generally
resisted, in regimes where institutions have a high degree of autonomy (e.g. USA, UK,
Germany, Scandinavia) accountability is becoming an increasingly important issue and (b)
that the descriptor stakeholder, presumably because it is just about acceptable to
academics, is also more less or less universally used.
The answer to the questions to whom and for what are academics, education institutions
(public or private), or manufacturing or commercial enterprises accountable is not
straightforward. It might seem obvious that the latter are accountable to their customers
who want value for money and will go elsewhere if they do not get it. However, there is
nowadays a growing pressure on private enterprises to be ecologically and socially
accountable. There are BSI and ISO standards for such matters. As we have already noted,
education organisations have a multiplicity of stakeholders frequently with conflicting
interests, not only to society for its future wellbeing and prosperity through the education of
its children, teenagers and and students but also to subject disciplines, other academics and
professional bodies. For society read government, especially for state institutions where
governments or their agencies are the paymaster. Though there may be other paymasters or
sponsors for research projects, for instance. In developed and more and more in emerging
countries, governments are investing vast sums of money in pre-, primary, tertiary and
higher education. In the UK the Government is pouring over ten billion Stirling into state
education. Tax-payers and hence governments anxieties to be ensured that value-for-
money can be demonstrated are hardly surprising.
In the private sector, standards are not problematic since aiming for ever higher standards
of quality is seen as encouraging the customer to trust in the quality of the product.
Achieving a recognised standard improves market credibility. In contrast, academics
express deep concerns about academic standards, in respect of both schools and universities
and schools are also held accountable for the development of the appropriate moral and
social values of young people. In addition, standards require compliance and compliance
entails loss of autonomy, an intolerable proposition to academics and to a less extent
schoolteachers, hence the reservations about standards:
Quality Assurance and Management
82
The difficulty in talking about standards is that the concept is like truth, or
goodness, or beauty, both logically indispensible and impossible to define without,
considerable philosophical elaboration. (Pring, 1992).
Furthermore, at a more practical level, slavish adherence to a standard can be a serious
barrier to innovation and progress. This is particularly true of normative standards or
descriptive statements which are prescriptive, stating how things ought to be done, like a
subject curriculum or a medical procedure. Ironically, apocrypha has it that ought is the
most overworked word in the schoolteachers vocabulary.
Criterion-referencing, in contrast, sets out what must be achieved to reach a standard. The
Council for National Academic Awards (CNAA 1965-1992), set up by the UK Government
in 1965 as the degree awarding body for the new Polytechnics in the UK was also the
custodian of the degree standard. To gain accreditation the institution had to demonstrate
that it could meet and sustain a threshold academic level. This did not preclude later
changes and improvements. One of the reasons the new post 1992 universities in the
UK were less neurotic about the role and function of the QAA (see below) was because for
over 25 years they had been part of the CNAA system, which included peer validation,
institutional review and annual monitoring. The uneasy relationship between universities
and governments is neatly summed up in a THES editorial in 2001:
Universities, have sought over more than a decade, to do as little as possible consistent
with keeping governments off their backs. Governments have, in consequence, become
increasingly frustrated and meddlesome. (THES editorial, 2001).
4. Doing quality
As outlined in the first section, the Japanese are credited with initially developing the
philosophy and methodology of continuous improvement with the aim of achieving
product excellence. This approach thy called kaizen which translates as making things
better (Ohno; Ishikawa. op cit.). It is founded on the principle of the total involvement of
the whole workforce that is to say everyone, from the top down. To succeed, the
enthusiastic support of the senior management is essential. One of the key elements is the
quality circle, a small group of 6 9 workers, which engages in problem solving of issues
related to their work. The idea if you want to improve something, ask the people who
do it seems pretty simple and straight forward. Nevertheless, it is an anathema to top-
down management systems of the sort which developed post-Taylor. Another key
principle is to take small steps. It is proposed that consolidated small steps achieve more
than attempting to change in leaps and bounds. Of course, senior managers have to listen
to what the quality circles suggest: another characteristic not common to Western
managers, at the time.
4.1 Quality tools for TQM, QA, QC and QI
The quality tools originally developed to support kaizen are aimed at identifying and solving
problems and improving processes. The most commonly used are:
The PDSA cycle: This is the basic methodology of continuous improvement:
Quality Assurance in Education
83
Plan = a change or a test aimed at improvement; Do = carry out the change or the test
(preferably on a small scale); Study = what did we learn? What went wrong? Act = adopt
the change, or abandon it, or run the cycle again (Deming, 1993).
The Problem solving cycle: is a version of PDSA specifically focussed on problem
solving:
Brainstorming: An effective and enjoyable method of getting a huge number of ideas
related to a given issue from a small number of people in a short space of time. It is a
feel free meeting, which has some important rules: e.g. no one should be criticised;
anything goes, no matter how outlandish. Brainstorming sessions are not without
structure: there must always be a leader; all ideas should be written down on a flip
chart; time must be apportioned to brainstorming the issue and to reflect on and
evaluate the ideas generated.
Flow Chart: A relatively simple way of describing or mapping a process, mapping from
start to finish. Analytical Flow Charts, which are rather more complicated, are so
commonly used throughout the world that the international symbols used can be found
in the insert section of the Windows Vista control bar (Bank, 1992; Implementation
Group of the BDA,1995)
Histogram: is a graphic illustration of data distribution (also in the Vista insert tool
bar).
Quality Assurance and Management
84
Run Chart: Another effective tool for presenting data, a line graph illustrating how a
process changes over time.
Statistical Process Control (SPC): A much more sophisticated chart which
demonstrates the variation of a process between upper and lower control limits. It
enables distinction to be made between special and common causes of variation
(Neave, 1990) This is one of the basic tools for straightforward product improvement
but it is very difficult to apply to outcomes which are not numerically measurable, e.g.
in education, health and social services.
Quality Assurance in Education
85
Cause and effect or fishbone diagrams: conceived by Ishikawa, this diagram aids in
analysing a problem in the context of a complete process:
Pareto analysis: Pareto was an Italian economist who noticed that in many unequal
distributions about 80% of a problem could be attributed about 20% of its causes. This
has become known as the Pareto Principle. If the 20% can be identified, problem solving
can be focused more effectively on the 80% student or staff absenteeism, for instance.
Paired comparisons: a method of helping a group to quantify preferences. Each option
(e.g. potential solution) goes head-to-head with every other option. In each face-off
members vote for the option they prefer. Votes are totalled when all the comparisons
have been made.
Customer chains: a frequent cause of hold-ups, poor communication and loss of
quality is the breakdown of customer chains. Most outcomes involve several linked
processes. When one process is completed, the next process is the customer, so to
speak, of the former process:
Quality Assurance and Management
86
This represents an internal customer chain, where the P1 team is responsible for the quality
management of what they hand over to P2 and so on. A breakdown anywhere in the chain
can have serious consequences; hence: we are only as strong as our weakest link.
Questionnaires: common sense suggests that the obvious way to find out what the
customer wants is to send out a questionnaire, so this is a favourite resort of market
researchers and even, in large organisations, internal QA. Of course, in matters of
scientific, empirical research common sense is a poor guide. Questionnaires are an
essential tool for sociologists. There are serious statistical problems in respect of sample
size, response rate, validity, reliability and construct validity. Devising and testing an
acceptable questionnaire for a piece of social science research can be quite expensive
and time-consuming. However, many QA and market researchers have a much more
pragmatic, broad brush interest in gaining a quick turn-around. In the UK and many
other countries Student Satisfaction Surveys, constantly contested by academics have
been introduced. School Inspectors send standard questionnaires to parents one size
fits all wherever or whatever the type of school. There are also more carefully
constructed questionnaires available such as SERVQUAL, devised in the 1980s to
measure satisfaction with services, which has been applied to student satisfaction and
variations such as PERFSERV and HEdPERF.
Benchmarking: requires researching best practice in the field of activities an
organisation is involved in. There is a useful overview of its use in HE in Jackson (2001).
The aim is to identify specific activities where improvement is perceived as necessary.
Usually, it is external, which is likely to lead to the best results, especially where
innovation is sought, though it can be internal, where some part of the organisation is
outperforming the others. It can be an effective, though costly and time-consuming,
contribution to quality improvement.
Force-Field Analysis: a means of identifying forces helping and hindering the
institution or section to get from where it is to where it wants to be. This can be a very
helpful tool for achieving aims or circumnavigated intractable opposition e.g.
Quality Function Deployment (QFD): is a quite complex method of identifying
customer needs. Listen to the voice of the customer is a cornerstone of TQM. First,
the customers equirements for x are agreed, x is delivered and then both the
evaluation and the providers evaluation of how it was delivered are compared.
There is a very interesting account of the application of QFD in Thakkar; Deshmukh;
and Shastree (2006).
Quality Assurance in Education
87
There are a huge number of books and journal articles elaborating these tools. A very clear
account of the most frequently used can be found in Banks, J.(op cit.1992). For a really down-
to-earth account of how to use most of these (and other) quality tools, see Rank-Xerox
(1993). A really positive effect of training people to use these tools is that everyone can
become involved cleaners or senior managers. They are relevant and useful in indentifying
straightforward or complex problems, whether the process is simple or complicated:
extensively used by quality circles (see below) or improvement teams they encourage the
sense of involvement or empowerment across whole organisation.
4.2 Performance indicators
Performance indicators, of which there are many, have been around for a long time in
education. We have already noted that the first school inspectors were implementing
payment-by-results in UK state schools through performance outcomes, including tests in
the 1830s. Some, e.g. financial indicators are not necessarily directly related to quality
(though procurement might be). The following list considers only those that are obviously
relevant. Also, as far state schools, FE and HE Colleges and Universities are concerned,
many resources are either centrally required by statutory regulations or in the UK and USA
Local Authority (LA) and District requirements:
Provision: area per pupil/student; staffing budget; building maintenance; capital
expenditure; staff development budget; procurement; unit costs; marketing
expenditure.
Process: student/staff ratio; average student hours (HE and FE), average teaching staff
hours(full and part-time); average class size (schools); % pupil/student attendance; staff
absenteeism; quality of teaching and learning; space utilisation; consumables;
pupil/student/staff support.
Progression: examination results; progression ratio (schools =secondary to tertiary; FE
and HE = annual retention rate); progression to post-graduate study (FE and, mostly,
HE); successful employment; added value (AV) and contextual added value (CAV);
post-graduate degrees, including doctorates, awarded; research grades awarded (UK).
Targets: very popular where the pressure to make improvements in outputs is strong in
either state or private sector enterprises. They are now extensively used by
government in education (and in other public services) as a means of exerting
pressure on schools, colleges and universities to meet priorities and improve and/or
monitor such matters as academic progress, admissions, progression through the
system, and employment. They are also used internally for similar purposes and are
thus perceived by many staff as instruments of external or internal managerial
coercion. Hitting or falling short of targets contributes to league tables, much hated
by the profession, but loved by governments and the media as a beating stick. The
attraction of targets and league tables to the paymasters can be contrasted to their
rejection, as much on philosophical as statistical grounds, by TQM gurus such as
Tribus, M. (1994) and Deming (op cit. 1993). Deming regards numerical goals (both in
industry and education) as futile and counterproductive, concluding: ducation
should be a system in which pupils on up from toddlers through the university take
joy in learning, free from fear of grades and gold stars, and in which teachers take joy
in their work, free from fear in ranking.
Quality Assurance and Management
88
Contextual value added: in education value added is usually calculated by measuring
performance (using Standard Attainment Tests ((SATS) or some equivalent) at the
beginning of a stage (primary, secondary etc.), working out by means of complex (and
contested) statistical methods what the expected attainments, weighted for social and
economic background should be and giving it a numerical score. Thus 100 = expected
attainment achieved and anything above 100 = positive value added and anything less =
negative value added. Apart from the dubious methodology, the fact that this is an
industrial input output process does not endear it to educationists. It is the holy grail
of their paymasters.
Where performance indicators can be measured, even when the outcomes are somewhat
intangible, they are regarded as hard indicators or metrics: in the UK, for instance,
Ofsted inspectors grade teachers and QAA Subject Review teams used to grade teaching
quality, though individual scores were never divulged. It must be emphasised that QA,
QC, QI and TQM are not synonymous. Although many of the tools were designed
specifically to facilitate the development of TQM, which is a system and will be discussed
below, for the most part in themselves they are neutral. They can be utilised to improve
quality from a variety of conflicting ideological stances. Command economies have as
great a need to produce high quality goods and services as capitalist economies. Different
organisations will have differing mindsets and values and therefore differing priorities.
Coercive governments and managements can, and do, make very effective use of targets
and other quantitative measures (all of which encourage the development of league
tables). Essentially, performance indicators are impersonal can easily be used to provide
a stick with which to intimidate the uncooperative or ineffective employee. In contrast
other organisations, inspired by human relations organisation theory, will use quality
tools as they were designed: to encourage and facilitate worker involvement and
empowerment.
It is not the purpose of this chapter to venture into the domain of sociology. However, a
frequent criticism of QA, QC, QI and quality in general is that they require a tick-box
mentality and encourage the development dull and brutish bureaucracies. On the contrary,
if an organisations management style is creative, positive and entrepreneurial so will be its
approach to QA. State education is now mass education at all levels, primary, secondary
and tertiary. Schools with 1300+ pupils and colleges and universities with 20,000+ students
are so huge that some level of bureaucracy cannot be avoided, nor can management and
leadership even if the management style is collegiate more about this later.
4.3 Systems
Systems is used here in the sense of a coherent way of doing something Quality
Assurance not in the sense of everything that goes on in the black box. Organisation theory
and organisational development is a different and much larger subject including, for
instance: Normative Strategic Management; Management by Objectives; Human Relations
Theory, etc. QA of some kind will be part of the larger enterprise, even if it is a small or
medium-sized firm, a small Primary School or a University with thousands of students.
TQM is one quality system which can be described as a complete organisational system in
itself, so we will deal with this first.
Quality Assurance in Education
89
TQM
TQM was the name given to W. Edwards Demings concept of transformational quality
management. It inspired the Japanese industrialists and was eventually embraced in the West.
It is nowadays peddled, in various forms, by a multitude of management consultants. TQM
reaches far beyond QA, its underpinning philosophy being grounded on a passionate belief in
a positive attitude to human nature. Deming and his followers call for a radical change not
only from closed to open management and leadership styles but also to Government attitudes
and policies, especially to education. It is a holistic management system requiring a system-
wide quality culture in which everyone in the organisational hierarchy from the bottom up
takes responsibility for her/his contribution to the whole: hence total. Taking a risk is
encouraged; mistakes are tolerated and regarded as learning experiences rather than
blameworthy; suggestions for improvement are encouraged, evaluated and adopted where
appropriate. This is what is meant by empowering your people. Unfortunately, the meaning
of the word empowerment has been debased through casual usage. In The New Economics
(1993, op cit.), Deming describes his version of TQM in detail in the context of current practices
in Western Industry. Government and Education: all three he puts to the sword:
What they do is to squeeze out from an individual, over his lifetime, his innate
intrinsic motivation, self-esteem, dignity. They build into him fear, self-defence, and
extrinsic motivation. We have been destroying our people.
The cornerstone of his system is the famous key 14 management points. These call for:
commitment to focus on quality both of incoming resources and the continuous
improvement of the quality of outcomes: active participation of all members of the
organisation, improved communications (bottom up and the top down) and cooperation
and coordination: the importance of meeting customer needs: the driving out of fear: the
substitution of inspection by procedures which detect errors and encourage continuous
quality improvement. To transform the product, whether it be manufactured or a service,
the culture of the entire organisation needs to be transformed an aim which is neither easy
nor swift to achieve.
Given its positive, optimistic view of human nature, transparent and easy communications
up and down the organisational hierarchy, commitment to the mission and shared values, it
might be thought that TQM would be attractive to academics. To some extent this has
proved correct. Sallis and Hingely (1992) give a clear account of TQM and its take up in
education and an abundance of books and journal articles have been published since. There
are several journals in the UK and USA devoted to quality e.g. Quality Assurance in
Education, and the Journal for Quality and Participation. There is more in the American
journals about TQM in schools than in those in the UK, where the concentration is heavily
weighted towards HE and FE. Professor Geoffrey Alderman put the case for TQM in HE
rather persuasively, if not rationally:
...(the university approach) is grounded unashamedly in a total quality management
(TQM) philosophy. Because TQM represents a holistic approach to the achievement of
quality because it stresses the part everyone in an organisation has to play for quality
overall and because it places a premium on the ideas of constant improvement, cultural
evolution, quality circles and team work. Its approach strikes a chord with academics,
and its philosophy has found a number of academic champions - even if some of them
practise TQM without being aware of it. (Alderman 1996).
Quality Assurance and Management
90
However, the Sallis and Hingely report shows that the impact of developments in TQM was
greater and more widespread in FE than in HE, probably because of the vocational
orientation of FE. A comprehensive guide to the implementation of Strategic Quality
Management in FE Colleges (Miller & Inniss 1992) was commissioned by the UK
Department of Employment. By 2000, the BEM (Business Excellence Model) approach was
well established in some UK FE Colleges (McAdam & Walsh (2000)).This tendency is even
more marked in 2011 than it was in the 1990s. Currently, the European Union provides
strong support for the development of harmonised QA processes for vocational education
across its member states through EQAVET (European Quality Assurance in Vocational and
Educational Training). EQAVET provides a wide range of support and training and there is
now a European Centre for the Development of Vocational Training one aim of which is to
establish a European framework for quality assurance based on EQFM.
Lean Six Sigm
Six (or 6) Sigma is a potent quality control metric, originally developed from Shewharts
process control statistics at Motorola in the 1980s. Sigma () is the symbol for standard
deviation in statistics and Six Sigma is a means of driving down deviations (errors) in a
process to an incredibly small per cent. Over the next twenty years it progressed to a much
wider application in an organisation. The method is known as DMAIC Define an
opportunity; Measure performance; Analyse opportunity; Improve performance; Control
performance. Recently it has been linked to Lean Manufacturing, generally referred to as Lean.
This is a process method derived from the Toyota Production System (TPS), dating back to the
1950s. This aims at eliminating waste thus maintaining value whilst reducing work i.e. it links
back to zero defects, Taylorism, Time-and-Motion and Fordism. These links with the
attitudes and values of mechanism and mass production would not seem very attractive to
academics; nevertheless, there are examples of its application in HE (e.g. Dorman 2011).
European Quality Foundation Model (EQFM)
The European Quality Foundation Model (EQFM) and the British Quality Foundation
Model (BQFM) are effectively the same. They are sometimes jointly referred to as the
Business Excellence Model (BEM). These systems can be applied equally well to Service
Industries or Business and Manufacturing. The model is now well established across Europe
with over 30,000 firms participating, including the education sector. The model comprises
nine criteria:
Quality Assurance in Education
91
The various elements are differently weighted. Firms assess themselves against the nine
criteria. Based on their self-assessment, they can then apply to be recognised as a firm having
achieved sustainable excellence. The highest accolade is to win the EQFM Quality Award.
The Foundation trains assessors from member firms, so the assessment method is essentially
based on self-assessment followed by peer-group assessment. Firms are encouraged to use
the RADAR improvement process:
Essentially this is the same process as PDSA and any of the QA and QI tools can be
appropriately applied. The model is NOT a standard. It does not lay down how to do
anything, only the criteria by which the achievement of excellence will be judged. The links
between the EQFM and TQM are obvious. Like TQM, the model allows academics to retain
their autonomy, though it does require external, third party assessment. The American
parallel is the annual Baldridge Awards. Unlike the EQFM awards, Baldridge is nationally
administered by the National Institute of Standards and Technology. The Awards are
presented by the President. They were officially set up by public act in 1987 and, since then
the scope has been widened from a focus on manufactured products to include services and
education; Baldridge is now referred to as the Performance Excellence Model. Criteria for
the awards are remarkably similar to EQFM including such elements as: leadership:
improving performance and results; strategic planning; customer focus; measurement and
analysis; developing a learning organisation. Schools have figured regularly since 2001 in
the Baldridge Awards but less frequently in BQFM and EQFM awards.
ISO 9000 (series)
ISO 9001 was derived directly from the British Standard BS 5750 (Series) series means
that there is more than one version of the standard, e.g. an enterprise opts for the basic
management standard or for the inclusion of an extra clause covering product design.
Opting for product design made achieving the standard significantly more difficult. BS5750
was immensely influential and regarded as a general guarantee of quality. By the 1990s
firms outside the UK were seeking registration. In the 1980s the American National
Standards Institute (ANSI) adopted the standard unchanged and in1987 the International
Standards Organisation (ISO) adopted BS5750 as the basis of ISO 9000 (now 9001 Series).
The ISO keeps its standards under constant review through a system of technical
committees and the standard has been refined over the years. The most important
Quality Assurance and Management
92
developments were made in the 2000 version which placed increased importance on process
management and continuous improvement. Nowadays, well over one million firms are ISO
9001 registered.
Like BS5750, which it has replaced, ISO 9001 is a documented system, so that evidence of its
effective implementation can be produced at any time. Certification, which can only be
given by an Accredited Firm, is not based on self-assessment, but on the production of a
Quality Manual containing an account of how each of the clauses is interpreted and how it
will be implemented. Every member of the company, whatever her/his position in the
hierarchy is expected to know the contents of the Quality Manual. The manual must also give
a clear account of the enterprises interpretation of quality (BS 5760 and ISO 9001 both define
quality in terms of customer wants and needs), its management policies, how the system
will be continuously improved and how it will be internally audited. Certification is not
permanent. Regular auditing by an accredited auditor is also a requirement. Auditing,
internal or external, is not inspection of the quality of products. Error free delivery of the
quality system as set out in the Quality Manual is the criterion. Auditors are trained
professionals. No preparation for an audit is needed. Auditors ask to be shown the
appropriate documented evidence: either it is there or it is not. Minor errors, if there are not
too many of them, are acceptable provided the enterprise later produces evidence that
they have been corrected. Systems failure results in loss of Certification obviously a dire
consequence for a firms reputation for quality. Compliance is thus a key element in
certification.
ISO 9001 is not an immediately obvious choice for education, especially schools and
universities. Compliance and autonomy are seen as opposites, though the compliance
required by ISO 9001 is compliance with what you say you have already decided to do
rather than compliance with what someone else has told you to do, also educationists claim
not to know whom their customers are. It is also perceived as a tick box, mindlessly
bureaurocratic and costly system resources are always in short supply in state schools.
Only one university in the UK (Wolverhampton) has successfully pursued the BS5750/ISO
9001 route. The process and the pros and cons are well documented (Doherty, 1993, 1995;
Storey, 1993). Much more interest is shown at departmental and subject level, particularly
where quality systems are taught as part of the curriculum in Engineering Departments and
Management and Business Schools (Thorhauser, T. & Passmore, D.L. 2006). This contrast in
attitude between departments and institutions is remarked on and criticised by Matthews,
(1993) as an example of double standards in academia, resulting in the real danger of
universities and colleges teaching one set of values while having a different set for
themselves. FE Colleges in the UK and Technical Colleges in the USA and elsewhere
(CEDEFOP, 2010) still show more interest in implementing the BEM than schools and
universities.
4.4 Inspection
As we have seen, inspection by men in white coats has long been regarded as counter-
productive in industry and commerce though quota sampling might be used as a
quantitative quality measure. Inspection is used here as a third party and overtly impartial
examination of a product, company, institution or part of an institution to assure the quality
of what is being delivered. The most common are School and FE inspection and HE Review
Quality Assurance in Education
93
for which the Office for Standards in Education, Childrens Services and Skills (Ofsted) the
Quality Assurance Agency (QAA) respectively are responsible in the UK. Ofsted is a quite
small government department that contracts out its inspections to various private education
consultancies. Developed countries have similar arrangements. The QAA is a not-for-profit
limited company. It is a statutory body in England and a registered charity in Scotland and
Wales. Agencies, many modelled on the QAA have sprung up, particularly in the Pacific
Ring and Australia. In the USA and South America all QA is contracted to private agencies,
although there are national guidelines provided by such organisations as the Council for
Higher Education Accreditation (CHEA) and the Central American Quality Assurance
System (CAQAS). In addition to nationally orientated agencies, there are also Professional
Bodies, some which have stringent codes of practice and QA requirements, for instance to
name but three of dozens: Law; Psychology; Engineering. Again, professional bodies are
established in all developed countries.
QA must have something to assure, there must be a product. As we have noted, there is
some difficulty in defining the product of schools, colleges and universities.
Currently, the nearest to a consensus is to define the product as teaching and learning or
learning experiences, where teaching is subsumed into learning as one of the
experiences, as it were. Practically all are agreed for philosophical and ideological reasons
that the pupil/student cannot be the product. Furthermore, she/he is an active participant
in a process where transactions between the teacher and learner are happening all the time.
In addition, the product must have a purpose. Purpose generates as much disagreement as
product, among educationists, that is. Sometimes purpose is defined by Government
policy. In the UK, for example, the 1944 Education Act was quite clear that the purpose of
education was to ensure equal opportunities for children to receive free education up to age
15 and later 16, suited to their abilities, allowing them to achieve their full potential.
Subsequent to the Robbins Report of 1963, this principle was extended to HE. The Report,
incidentally, was also quite clear about the purposes of HE which included ...the promotion
of the general power of the mind so as to produce not mere specialists but, rather cultivated
men and women. There have been many Acts since, but this principle remained more or
less firm until quite recently. In the 1990s, UK Governments have toyed with the idea of
marketising education with a view to raising performance through market competition.
University fees were re-introduced in 1998 and have been a political bone of contention,
sometimes quite violent, ever since. The political, ideological and financial arguments
surrounding these developments are not relevant here, but the practical implications are.
Charles Clarke, when he was Secretary of State for Education in 1992 claimed that the
purpose of HE was to contribute to the development of the UKs economy and society in the
context of global change. This purpose is out of kilter with the Robbins principle and is a
clear example of political pressure on both education providers and those responsible for
assuring the quality of their products.
Ofsted: Ofsteds methodology has evolved over the years, becoming leaner in the process.
Prior to 2005, two months notice was given of an impending visit. This was followed by a
large team of inspectors who spent a week in the school. Every teacher was observed and
the management of everything from finance and resources to the curriculum was
scrutinised. Post 2005, two days notice via phone call is given and a much smaller team
visits the school for a few days. The key document a school must complete is the self-
Quality Assurance and Management
94
assessment form, in which it is required to provide a detailed self-assessment of such
elements as Senior Management, Curriculum Content and Management, Teaching and
Learning, Student Achievement, Resources, Student Behaviour and School Governance. The
touch is lighter, considerably lighter for high performing schools. Elements, including
teaching and learning are graded: 1 (outstanding); 2 (good); 3 (satisfactory); 4 (inadequate).
Schools are graded overall as: 1 (outstanding); 2 (satisfactory); 3 (failing). Failing Schools are
put in Special Measures, usually resulting in the replacement of the Head Teacher and Senior
Management team and other draconian measures designed to turn the school round. The
criteria for all these grades are clearly set out at length in widely available Ofsted
documents.
This current methodology is destined to change in 2012. The self-assessment is to be
dropped and the inspected elements narrowed to five. The method is intended to be
proportionate, so that for instance, outstanding schools will not be inspected at all, unless
certain alarm bells begin to ring. The new procedures are currently under discussion, but
will be agreed and advertised in time for a September 2012 start. Some variation of this
methodology is common to most other school and college inspection systems. Generally,
following Ofsted visits, schools either set themselves, or are set targets for improvement by
other bodies with responsibilities for school performance such as Local Authorities.
Quality Assurance Agency: like Ofsted, the QAA has changed and evolved since its
predecessor was set up 1992 by HEFCE. This was the Quality Assessment Division, which
first embarked on Subject Reviews. It was fairly quickly replaced (1997) by the Quality
Assurance Agency (QAA), an independent agency partly funded by subscriptions from the
universities and partly by government and other contracts. Like Ofsted, its methodology has
evolved over the years. Originally, there were two arms to QAA methodology subject
review and institutional review (or audit). Subject departments were reviewed in turn and then
the cycle started again. Departments were required to produce a self-assessment, which was
then used as the basis for the visit by a small team of reviewers (usually 3 4). Review teams
were led by a Review Chair chosen from a fairly small cadre of self-employed professional
quality consultants together with peer-group reviewers all of whom had completed a QAA
training course. A cross-section of teaching was observed and a grade (1,2,3,4) from good to
unsatisfactory awarded. No lecturers were named. A distinction was drawn between
academic standards those aspects concerned with curriculum content, student numbers and
attainment and quality of student experience resources, student progression and student
support. In contrast, Universities and Colleges were reviewed by a similarly composed, but
larger, Audit teams.
With various adjustments over the years, this two-pronged approach lasted until 2001, when
regular subject review was discontinued in favour of periodic institutional reviews, with closer
scrutiny of subjects only where there appeared to be cause for alarm. After lengthy
consultation with the institutions, a new, even leaner and more flexible version of review
has been agreed for implementation in 2011. To support the review process, the QAA
publishes a series of booklets which have evolved over the years through consultation and
collaboration with universities and colleges, setting out the Academic Infrastructure:
Frameworks for HE Qualifications; Subject Benchmark Statements; Programme Specifications; Code
of Practice. The Agency is a full member of ENQA (the European Network for Quality
Assurance) and its methodology has had considerable, world-wide influence (Mok, K. 2005).
Quality Assurance in Education
95
Both the inspection and the peer review models attract often cogent criticism, especially from
dissenting academics. Even peer observation, except when it is voluntary, is opposed on the
grounds that the observer warps the learning experience and that it is impossible to grasp
and properly measure the elusive quality factor. Other common criticisms are that they are
costly and disruptive, diverting resources away from supporting educational objectives.
Preparation for a major inspection or QAA visit would begin months in advance. Writing
and editing the self-assessment or completing the self-assessment form was a major task and
everyone involved in the event needed to be thoroughly conversant with it: all of which
diverted concentration away from the core activity of teaching. To these negative effects can
be added: lowering staff morale; the encouragement of teaching to the target; departmental
and institutional gamesmanship; increased bureauracy and managerialism. A further
limitation, is that both approaches are heavily weighted towards teaching and learning.
They are not coherent holistic systems looking in equivalent detail at the contribution of
administration, procurement or the learning environment although as they have evolved
over the last two decades, what counts as quality of experience has widened considerably.
The progress made towards leaner methods and lighter touch in inspection methods in the
UK can, perhaps, be partly attributed to the influence of the Business Excellence Model. In
1998 the Cabinet Office set up a task force for Modernising Government Quality Schemes
which produced a report, The Next Steps Report, recommending the encouragement of three
initiatives: The Charter Mark; Investors in People; and the BEM. The influence of TQM
methods can be seen in the development of Ofsted criteria, the increased range of qualitative
elements and the collection of data related to customer satisfaction parents and students.
Over the last two decades there has been a steady stream of research papers focused on
specific quality tools, for instance: Thakkar et al.op ct. (2006); Leadership (Osseo-Assare, et al
2005); Service Quality (2005); SERQUAL and other service tools (Deshmukh, et al. 2006). The
most notable development since the 1990s is the wide spread, global interest in QA systems.
For example, a superficial content analysis of the contributions to the journal QA in E
reveals that in 2001 c. 80% were from UK sources and most of the remaining few were from
either the USA or Australia, whereas in 2010 90% were from non-UK sources, in which
contributions from far eastern institutions and Spain, Portugal, Australia and the USA were
the most frequent.
We have already noted that a wider perspective (Kis, op cit.) has shown that, while there has
been some increase in TQM, EQFM and Baldridge activities in educational institutions
including schools (in 2009 there were six school winners of BQF Quality Awards, three of
EQF Awards and there have been regular school winners of Baldridge Awards for many
years), it is neither extensive nor consistent. In their more specific research into ISO 9001 in
US and UK universities (Thorhausen & Passmore op cit.) report on the generally favourable
responses to the implementation of ISO 9001 but, interestingly, that many of those who had
achieved registration were voluntarily relinquishing it, the most frequent reasons cited
being cost and QA fatigue. Given the ever mounting pressure from governments,
competition between institutions and the interest of other stakeholders students, parents,
employers (not to mention the well known barriers to any kind of radical change in
organisations) this is hardly surprising:
There are multiple layers of overlapping audit, assessment, accreditation and external
examining. However, that is only part of the burden; there is also the internal quality
Quality Assurance and Management
96
procedures that have to be adhered to, including for many academic staff, annual
module or programme reports, reporting on research activity and publication, periodic
programme revalidation, occasional departmental or faculty reviews, possibly internal
teaching assessments, internal audits, facilitating and responding to student feedback
and individual performance review or staff development procedures... (Harvey, 2005).
There seems some reluctance for social scientists to show interest in or commit resources to
the effects of the BEM on education. Leonard, & McAdam, (2001) argue that there is a need
for much more in-depth, qualitative, ethnological research in the field and suggest a
methodology. Ethnological and anthropological research call for longitudinal studies: costly
and attractive neither to quality assurers nor paymasters, both of whom like quick results.
Moreover, governments, providing agents and their inspectors tend to trust numerical data
like league tables (however dubious their reliability) rather than qualitative data. Other
factors militating against large scale quality research programmes are, again, the lack of a
generally agreed theory of quality and the sheer size of TQM and BEM initiatives, which
involve the whole organisation and its people, not just bits of it. Ironically this makes it
easier to restrict research activities to one department rather than the whole institution.
Finally, there is the general aversion to, and lack of trust in any approach derived from a
manufacturing source.
5. Culture shock and conflict
There is pretty well universal agreement among writers on quality about one thing at least,
namely that quality initiatives of any kind are doomed to failure without the development
of a quality culture in the organisation, something very difficult to achieve. Superficially, at
least, culture is not such a contested subject as quality. Applied to people, its dictionary
definitions which include: common beliefs; characteristic ways of doing things; behaviours;
prejudices; customs and values, appear to be generally acceptable. Thus developing a TQM
quality culture involves developing a commitment from every member of an organisation
to place a high value on error free, continuous improvement.
Organisation theory is an important element in Business and Management Programmes.
The literature on organisations is extensive and beyond the scope of this chapter. However,
both TQM and BEM call for an open, cooperative, consultative management style. There is
also general agreement that the culture of an organisation will stem from top management
and that the development of a quality culture is impossible without the total commitment of
senior managers. This is difficult enough in manufacturing and business, where the product
and production processes are clear. As we have already seen, clarity is not a characteristic of
educations purposes, processes or outcomes and the officially favoured quality methods
are Inspection and Peer Review, neither of which requires open, cooperative, consultative
management styles. Atkinson (1991), a quality consultant not an academic writing for
business and industry not academia, sets out an admirably clear account of the relationship
between leadership, TQM and cultural change. Effective leadership is inspirational,
charismatic even, generating in followers enthusiasm for and commitment to the task,
whatever it might be. Leaders do right things, whereas managers do things right. This is
standard doctrine in the management and business studies curriculum. There is a strong
tendency, therefore, for managers to cherish the status quo, especially in education, where
the pace of change is notoriously slow. Two other problems he emphasises are the difficulty
Quality Assurance in Education
97
of developing a change to commitment to quality in the workforce and the necessity for
comprehensive training programmes before trying to introduce TQM methods.
The workforce in the context of education is not a straightforward entity. There are two if
not three quite different workforces namely, academics and the support staff, which
include administrators, and the rest. Administrators, even in small primary schools, have a
culture of their own. They have been more favourably disposed towards quality systems,
especially those which focus on error free delivery, than academics. The Conference of
University Administrators published its own TQM handbook (Doige & Whitchurch 1993).
As already noted, there is not a great deal of research into institutional overviews of QA ad
TQM. Ehlers (2009) considers several currently popular theories of organisational behaviour
and the importance of values in organisational development, concluding that TQM is the
most appropriate approach to quality in the context of the culture of academic
organisations. Harvey (op cit.) refers to the wide range of different QA agencies, reporting
that, despite this variety nearly all of them use the same method performance indicators
and self-assessment followed by peer review. Other researchers, however, are more
negative. Poole (2010) postulates that the cultural divide between QA professionals and
academics is as wide as the rift between Snows (1963) literary v. scientific cultures. The
introduction of QA, in the shape of the QAA and perceived by academics as a time wasting
irrelevance, is linked to Thatcherism and the rise of the New-Right ideology. He suggests
that this cultural divide could be narrowed by consultation, participation and more
emphasis on quality enhancement (all characteristics of TQM). Davies (2007) in a case study
research reports that academic staff see EQFM as a managerial attempt to become involved
in collegiate issues and have problems in trying to translate the business language of
EQFM into their terms. To involve academics, Davies suggests there should be more
emphasis on teamwork, self-improvement and creating a supportive environment. In
another attempt to assess academic attitudes based on interviews, Cartwright (2007)
identifies a big discrepancy between the rhetoric of quality managers and QAA practice.
Staff display cynicism, regarding the QAA methodology as bureaucratic, time wasting, and
part of management intentions to exercise more control over academic autonomy, leading to
a culture of fear and suspicion. These studies are based on small sample sizes, but they all
report similar negative reactions.
The same themes have become a liet motif over the last two decades clearly
demonstrating that academics perceive quality management as currently delivered by the
QAA as a consistent threat to their collegiate culture, a term which is loosely defined as an
organisation made up of equals: professionals, sharing the same academic values and,
where decisions have to be made, they are consensus decisions made after appropriate,
open discussion. In reality, collegiums are idyllic dreams. Anyone who doubts this should
consult the Micro-cosmographia Academica: being a guide for the young academic politician
(Cornford 1908). It contains some priceless pearls of wisdom The Principle of the
Wedge; the principle of the Dangerous Precedent; The Principle of Unripe Time. The key
management aim is to do nothing whatsoever and power is exerted through influence.
The Micro-cosmographia is a young academics handbook of how to acquire it. Academic
culture is a carpetbag term: an oversimplification. Academics tend to be individualists
and egalitarian. They resent any form of control or rules (except their own, which are
quite stringent) because the rules of others involve the hated concept of compliance,
Quality Assurance and Management
98
which is regarded as incompatible with academic freedom and innovation (autonomy).
Also, there are cultures within the culture. Disciplines, departments and institutions
vary. Any ex-auditor or ex-subject reviewer will testify to the differences in ethos or
culture between old, redbrick, the 1960 generation, new universities and ex-colleges of
education. The new ex-polytechnic universities were already accustomed to a higher
degree of managerialism than the others and the redbricks and ex-colleges of education
regarded themselves as collegiate in the style of the old universities. The same goes for
school inspectors who will claim to gain a clear impression of a schools culture as soon as
they walk through the door.
The strength of commitment to this collegiate culture explains to a large extent the depth of
cynicism, resistance and lack of trust with which a wide range of academics, educationists
and other public services regard QA systems as they experience and perceive them:
Naming and shaming is a central part of quality assurance procedures throughout the
public services in Britain...The act of inspection itself is riven with the potential for shame
and humiliation. (Morley 2005) One wonders what Deming, Juran, Ishikawa et al. would
make of that. Overall, the state of Quality Assurance in Education is not very different in
2011 from what it was in 1991: subject to conflict and dispute. On the one hand governments
mistrust the education systems willingness to commit to raising standards (schools) and the
post-secondary (particularly the universities) willingness to commit to providing
qualifications aimed at improving the economy and on the other, educationists particularly
academics regard government motives as politically motivated and QA methodology as
time-wasting, bullying and coercive. This varies, of course, across the huge spectrum of
third world, emergent and advanced economies, but the criticism appears to be stronger in
the developed countries than the rest. In the UK, the QAA and Ofsted have developed a
lighter touch and the evidence suggests this is the result of the influence of TQM and the
Excellence Model. In both schools and tertiary education, there is a growing interest in TQM
and BEM and researchers have become much more active in the field, though much more in
small scale, in-depth rather than large scale projects.
6. Conclusion
The claim that education is different from business and manufacturing is well
substantiated and not mere whinging as governments and other observers would like to
believe; though this is not to say that educationists, particularly academics, do not
frequently present themselves as obtuse to the rest of the world. In the UK alone, the
Government annually pours billions of Stirling into the education system. Not
unreasonably, whatever its political ideology, a government expects to receive value for
money. Constant reports that standards have deteriorated rather than improved: dumbed-
down A levels, ridiculously high percentages of 1
st
class and 2.1. degrees, a fall from 7
th
to
29
th
in the worlds school performance league table are produced as evidence. The
education profession clings to the 1944 Act and Robbins Report principle that free
education up to first degree standard is everyones right, despite the fact e this is no longer a
given in the public at large. Hence the official reliance on inspection and the taste for hard,
metric data, whatever its reliability, and easily absorbed league tables, whatever their
reliability.
Quality Assurance in Education
99
TQM and BEM systems offer a much more positive approach to both QA and
management style, than inspection. TQM goes beyond QA and has social and economic
implications. However, Demings vision of a society focussed on people committed to
cooperation, intrinsic motivation and without the unethical greed of capitalism seems as
idealistic as the academic collegiate dream. Restricted to QA in education institutions,
both TQM and the BEM offer autonomy in the sense that definition of quality and
application of the QI system is the institutions own and not imposed from without. The
price is that the institution has to produce evidence that it is doing what it said it was
going to do. This must now be seen in the context of globalisation, the introduction of HE
fees in England and the rapid rise of much more serious competition for HE students from
universities and colleges in the emerging economies. Both the USA and the UK who are
undisputed market leaders at the moment, will have to struggle to maintain this position.
More and more, despite the reluctance of academics to accept the fact, students are
becoming customers and will be looking for value for money. In this context of
international competition, TQM and the BEM may well prove to be much more market
orientated than inspection. This may require a change of tactics for the paymasters.
Ironically, as far back as 1983, Moss Kanter (op. cit.) describing employees enthusiastic
attitudes to the open, entrepreneurial style of an exciting place to work, reported their
statements that: working in the company was like being in ...a family, a competing guild,
a society on a secluded Pacific island ...a university, a theocracy... Let us hope that in the
current application of the QAAs and Ofsteds outdated methodologies the paymasters do
not lose the baby with the bathwater.
7. References
Alderman, G. (1996) Self-regulation v. Inspection: the quality debate in British higher education
Quality World Technical Report IQA: Bedford.
Aristotle J. A. K.et al (1976) The Ethics of Aristotle. The Nicomachean Ethics Hammondsworth:
London.
Ashworth, A. (2009) Is this Watchdog Needed? THE 16 April
ATKearney (undated) Creating the Environment for TQM and Total Quality: Time to Take Off
the Rose-tinted Spectacles in conjunction with the TQM Magazine.
Atkinson, P. (1991) Leadership; Total Quality and Cultural Change Management Services, June.
Banks, J (1992) The Essence of Total Quality Management Prentice Hall: London.
Barnett, R. (1992) Improving Higher Education Total Quality Care OUP: Buckingham
Becher, T. (1992) Making audit acceptable: a collegial approach to quality assurance Higher
Education Quarterly 46 (1).
Brennan, J. & Silver, H. (1992) Who will lead the Charge or Sound the Retreat? THES (25). British
Journal of Educational 1992 40 (1).
Brookman, J (1993) Bordered by Red Tape The Higher, 5 March.
CEDEFOP (European Centre for the Development of Vocational Training (2010)
Accreditation and Quality Assurance in Vocational Education and Training: Selected
European Approaches: Luxenbourg.
Davies, J. (2007) The effect of academic culture on the implementation of the EQFM Excellence
Model in UK universities QA in E 15 (4).
Quality Assurance and Management
100
Deming, W. E. (1993) The New Economics, MIT Centre for Advanced Engineering Study,
Cambridge: MA.
Doherty, G. D. (1993) Towards total quality management in higher education: a case study of the
University of Wolverhampton Higher Education 25 (3).
Doherty, G. D. (1995) BS5750 parts 1 and 2/ISO9000 (series) 1987: do they fit and is it worth it?
QA in E 3 (3).
Dorman, M.S. (2011) A new lean paradigm in higher education: a case study QA in E 19 (3).
Ehlers, U. D. (2009) Understanding quality culture QA in E 17 (4).
Editorial (2001) Times Higher Educational Supplement 30 March 2001.
Elton, W. (1992) Quality Assurance
Elton,W. & Partington, P. (1993) Teaching Standards and Excellence in Higher Education 2
nd
. Ed.
CVCP, USDU: Sheffield.
Gorbutt, D, et al (1991) Quality Support: Measurement and Myth in Assessment and
Evaluation in Higher Education 16 (1).
Hackett, L. (2011) The Big Picture Show Times Higher Education 30 July.
Harvey, L. Et al. (1992) Criteria of Quality Quality in Higher Education Project, Birmingham
Central University of Central England: Birmingham.
Harvey, L. (2002) Evaluation for what? Teaching in Higher Education 7 (3).
Harvey, L. (2005) A history and critique of quality evaluation in the UK in QA in E 13 (4).
Harvey, L. And Green, D. (1993) Defining Quality in Assessment and Evaluation in Higher
Education 18 (1).
Ishikawa I. (1985) What is Total Quality Control? , Harper and Row: NY.
Implementation Group of the BDA (1995) Flowcharting: How and Why, British Deming
Association: Salisbury, UK.
Jackson, N. (2001) Benchmarking in UK HE: and Overview QA in E 9 (4).
Kis, V. (2005) QA in Tertiary Education: Current Practices in OECD Countries and a Literature
Review on Potential Effects OECD Tertiary Review,
www.oecdorg/data oecd/53/30/38006910pdf
Lambart I.T.G. (1993) Out of the Crisis with George, Mises and Deming British Deming
Association, Salisbury, UK.
Laughton, D. (2003) Why was the QAA approach to Teaching Quality Assessment Rejected by
Academics? Assessment & Evaluation 28 (3).
Matthews, W. E. (1993 The missing element in higher education Journal for Quality and
Participation Jan/Feb.
McNay, I. (2006) We sacrifice our souls on the altar of employability THE 27 October.
Melia, T.(1990) The Role of HMI in Quality Assurance, Address to the CVCP Academic Audit
Unit 7 December.
Miller, J. & Inniss, S. (1992) Strategic Quality Management (3 booklets: Guide for Senior
Managers, Guide for Middle Managers; Guide for Teachers and Teams), Consultants at
Work: Ware.
Mok, K. (2005) The Quest for World Class University: Quality Assurance and Benchmarking in
Kong, QA in E 13 (4).
Morley, L. (2005) Opportunity or exploitation? Women and quality assurance in education Higher
Rducation: gender and education 17 (4).
Quality Assurance in Education
101
Moss Kanter R. (1984) The Change Masters: Corporate Entrepreneurs at Work, Allen & Unwin:
London.
Neave H.R. (1990) The Deming Dimension, SPC Press Ltd: Knoxville TN.
Neave H.R. (1993) How SPC? British Deming Association, Salisbury: U.K.
Neave, H. R. (1993) The Experiment on Red Beads British Deming Association, Salisbury:
UK. Nest Steps Report 1998 (1999) Cmnd. 4273 Cabinet Office, Stationary Office:
London.
Osseo-Assare, A. E. et al. (2005) Leadership best practices for sustaining quality in UK higher
education from the perspective of the EQFM Excellence Model in QA in E 13 (2).
Peters, T. (1990) Liberation Management: Necessary Disorganisation in the Nanosecond Nineties
Macmillan: London
Peters T. J. (1988) Thriving on Chaos Macmillan: London.
Peters T. J. & Waterman R. H. J. (1982) In Search of Excellence Harper&Row: NY.
Pirsig, R. M. (1976) Zen and the Art of Motor Cycle Maintenance Corgi: London.
Poole, B. (2010) Quality, semantics and the two cultures QA in E 18 (1).
Pring, R. (1992) Standards and Quality in Education British Journal of Education 40 (1).
Richards, S. (1994) The Consumer Paradigm in Public Management in Doherty, G. D. Ed.
Developing Quality Systems in Education Routledge: London and NY.
Plato, trans. Cornford, F.M. (1994) The Republic OUP: London.
Pollitt, C. Ed. (1992) Considering Quality an Analysis:Guide to the Literature in the Public Services
Rank-Xerox (1988) Leadership through Quality (Reference and User Manuals), Xerox, Rochester:
NY.
Rank-Xerox (revised 1996) Leadership through Quality (Problem-solving Process: Users Manual),
Rochester: NY.
Shewhart, W.A.(1934) Statistical methods from the viewpoint of quality control The Grad. School,
University of Michigan.
Storey, S.(1992) Laying the Foundation for Total Quality Management at Wolverhampton
Polytechnic in Ellis, R. (ed.) Quality Assurance for University Teaching, OUP:
Buckingham.
Taguchi, G. (1986) Introduction to Quality Engineering Asian Productivity Association:
Tokyo.
Taylor F. W. (1911) Principles of Scientific Management, Harper Bros. New York and
London.
Thakkar. J;Deshmukh, S. G; and Shastree, A. (2006) Total quality management (TQM) in self-
financed technical colleges. A quality function deployment (QFD) and force-field analysis
approach. Quality Assurance in Education 14 (1).
Thorhauser,T. and Passmore, D.(2006) ISO 9000 in Education: a Comparison between the
United States and England, Research in Comparative and International Education 1
(2).
Tribus. M. (1994) Total Quality Management in education: the theory and how to put it to work
in Developing Quality Systems in Education, Routledge 1994: Londondon and
NY/
United Nations Development Programme (UNPD) & Regional Bureau for Arab States
(RBAS) (2006) Quality Assessment of Programmes in the Field of Education in Arab
Universities: A Regional Overview Report UNDP, NY. Kulwer: Netherlands.
Quality Assurance and Management
102
Watson, D. (2011) Who would want to be in the Driving Seat on the Road to Nowhere?
Times Higher Education 7 July.
Williams, G (1993) Total Quality management in education: panacea or placebo? Higher
Education 25 (3).
6
Challenges for Quality Management in Higher
Education Investigating Institutional
Leadership, Culture and Performance
P. Trivellas
1
, P. Ipsilantis
2
, I. Papadopoulos
2
and D. Kantas
2
1
Technological Education Institute (TEI) of Chalkis,
2
TEI of Larissa,
Greece
1. Introduction
In an era of global economic recession, Higher Education Institutions (HEIs) are
experiencing severe pressure from budget reduction. As a result, they have been forced to
develop more competitive ways in order to tap on resources and capabilities stemming from
contemporary rapid technological and organisational changes. Thus, quality management
issues have drawn the interest of academics and practitioners in order to build a sustainable
competitive advantage battling against economic recession (Altbach et al., 2009).
Nowadays, Greek economic arduous position triggered off downsizing and cost reduction
at unprecedented levels in the pubic sector, forewarning a similar orientation of
retrenchment of higher education. Hence, resource scarcity and decline will guide inevitably
to the corrosion of institutional effectiveness accompanied with lack of innovation, rigidity,
dissatisfaction, conflict, reduced quality and turnover, unless HEIs adapt to the vulnerable
environmental conditions and fiscal recession (Cameron & Smart, 1998).
Almost six years ago, a reform act was initiated for the adoption of necessary metrics and
processes in order to assure the quality of services provided by Higher Education
Institutions (HEIs) in Greece. This national quality assurance (QA) system aims at
improving transparency, comparability and accountability of the Greek higher education
system, fostering quality culture throughout the HEIs. Teaching and administrative staff
as well as students are expected to be the main participants and contributors in this
process. Evidence from other countries have shown that the introduction of an assessment
system, QA procedures, and long range planning leading to cultural change has met the
opposition and resistance of the majority of HEIs stakeholders (Morley, 2003;
Van Damme, 2002). The success of the quality management systems change and the
necessary transition in quality culture of HEIs depends on the ability of academic leaders
to handle crisis and to build a strategy supportive culture with the contribution of all
participants.
This chapter aims to give an overview of the QA system deployed at the Technological
Education Institute of Larissa (TEIL) and to describe the transition process through the
Quality Assurance and Management
104
investigation of leadership, culture, student satisfaction, graduates assessment and teaching
performance evaluations.
First, the chapter provides the general framework for QA initiated in higher education in
Greece, as the foundation of the quality system TEIL adopted. Then the chapter describes
the profiles and the emergence importance of leadership and institutional culture in the
implementation stage of QA system, to engage faculty and administrators in the evaluation
of service quality provided. Thereafter, this study presents the findings of a large scale
survey conducted by the QA unit of TEIL, investigating the quality level of teaching
processes and supporting services offered to students. Finally, this chapter concludes with
the perceptions of graduates about various aspects of quality in order to provide insight into
the strengths and weaknesses of the established system and offer valuable suggestions for
areas of improvement.
2. Quality in higher education
Though a plethora of meanings and connotations of quality term has been proposed, its
subjective nature has contributed to confusion and vagueness in the existing literature
leading to the lack of a universally accepted definition. In addition, the discipline of quality
in higher education suffers from ambiguity due to the interchangeably adoption of
conceptual different terms such as quality, accountability
1
and assessment
2
.
Yet, it might be more fruitful to provide an insight into many views that formulate a fuzzy
construct referred to as quality through theoretical consensus rather than defining it.
Initially, institutions of higher education have adopted the internally focused resource view
determining quality by the assessment of their internal resources, such as the number of
books in its library, the number of faculty with terminal degrees, size of the endowment and
reputation neglecting the influence of the changing external environment and the
emergence of sophisticated higher education customers (Seymour, 1992). Increased
competition, cost-efficiency, accountability and service orientations forced higher education
to gradually swift its focus on a value added or performance approach of excellence, where
quality is determined by its outcomes, such as efficient allocation and use of resources and
producing highly satisfied and employable graduates (Koslowski, 2006).
Originated in ancient Greece, Aristotle
3
rejects that quality is an act, and favours that it is a
habit. In another way, Crosby (1979) described quality as conformance to requirements based
on customer expectations. From a related but different perspective, Juran (1945) established
the fitness for use view as determined by the customer. However, Drucker (1985) determined
quality as customers willingness to pay in relation to what he/she values.
1
Accountability as an overarching principle has frequently been related to external forces such as
accrediting bodies, governmental agencies and the public (Koslowski, 2006).
2
Assessment as one of the many components of quality reflects the further refined tangible process
resulting to the evaluation of individual instruction, specific curriculum, and student learning as a way
to deal with and enhance the quality of higher education (Palomba & Banta, 1999).
3
Aristotle of Stagira (384 BC -322 BC) was an ancient Greek philosopher who first devised a
comprehensive system of Western philosophy, encompassing morality and aesthetics, logic and science,
politics and metaphysics.
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
105
In an attempt to synthesize diverse quality perspectives, Seymour (1992) interpreted in the
higher education context the five different types of quality proposed by Garvin (1988), as
follows:
Transcendent quality is a result of educators reputation and expertise, however, it is
internally focused ignoring the role of external agencies as well as the public.
Manufacturing-based quality is based on service conformance to specifications and
implies that the provider is capable of appropriate self-regulation. Seymour (1992)
advocates that this definition is useful in an educational context, since it
counterbalances the resource view of quality. Still, educational institution is responsible
to make the critical decisions about service design (degree offerings, curriculum etc.)
abolishing external environment and neglecting consumers wants and needs.
Product-based quality reflects student learning, produced by the curriculum and faculty.
It is closely linked with assessment due to its foundation on measurable and objective
indices and once agreed upon by administration and academia can advance teaching
and learning. Notwithstanding, it suffers from imprecision and it might be deceptive,
because several metrics such as retention rates and graduate entrance examination
scores fail to shed light on what students have learned and the competences gained
during their studies.
Value-based quality refers to acceptable or above expectations performance at an
acceptable price, meaning that higher education customers may consider the expected
salary after graduation in comparison with tuition fees.
User-based quality is determined by the customers needs, wants, desires, and
preferences, but in the educational context, they are highly idiosyncratic and partially
subjective. This approach is antithetical to transcendent, and resource views.
Regardless of the debate on quality perceptions which are inevitable, legitimate and evolving,
there is some agreement that quality has to be determined by stakeholders (Koslowski, 2006).
Thus, higher education has a number of stakeholders such as students, graduates, their
parents and family, academic and administration staff, employers, governmental agencies,
local community, and society, all of whom experience different aspects of quality.
For example, academics characterized by professional preparation and autonomy in the
delivery of the educational process are more inclined to define quality in resource rather
than performance terms, such as individual reputation, number of research publications
produced, and number of courses taught. However, administrators favour concrete and
definable measures of success or failure of administration and coordination processes, in
relation to abundant (and sometimes potentially contradicting) institutional goals and
obligations (Koslowski, 2006).
Bonvillian and Dennis (1995) recognize that quality in higher education is determined by
three related ingredients, namely (a) market forces as a result of fierce competition and
socio-economical environment of higher education, (b) the political context referring to
accreditation and public funding in order to efficiently accomplish more with less
4
, and (c)
students experiences and expectations.
4
Recognizing the significant impact of global financial crisis on OECD countries, the Institutional
Management in Higher Education entitled its last general conference: Higher Education in a World
Changed Utterly: Doing More with Less, (IMHE, 13-15/9/2010, Paris, France) in order to highlight and
reinforce initiatives toward sustainability and effectiveness.
Quality Assurance and Management
106
In this regard, the application of the marketing paradigm in higher education has advanced
the view that tertiary institutions serve customers endorsing service quality rather than
students. Thus, their satisfaction of their learning experience is crucial to develop
institutions reputation and gain competitive advantage over other institutions.
Moreover, on the grounds that students may not be in a position to recognize exactly what
is better for them at that point in life, Sitkin et al., (1994) distinguish that tertiary institutions
should educate customers in what they need rather than just aiming to satisfy what they
want.
Further, the term students is commonly tightly linked with a one-way approach of learning,
limiting the potential for greater collaboration and participation, while the concept of
customers indicates a sense of sharedness, interaction and feedback leading to knowledge
co-construction where involvement promotes knowledge acquisition and experiential
learning (Yeo, 2009).
In a similar vein, Rinehart (1993) discerns two different approaches of students regarded as
customers: (a) internal customers actively involved in the input and output of the learning
process, and (b) external customers playing the role of future employees and employers. The
latter type promotes the idea that education should prepare students for the future by
developing curricula suited to employment needs, even though students hardly envision of
what they need to learn.
3. Employees perceptions of service quality in higher education
Despite the various quality views have been put forth, there is some consensus that quality
has to be determined by stakeholders, especially in the services sector. Service quality
enhancement requires a sustained improvement in the clarity, accuracy and reliability of
services delivered under a holistic perspective. The imbalanced focus of quality attempts on
only external customers perceptions, ignoring internal customers would stimulate the
resistance among the latter. On the other hand, it may not be feasible to simultaneously
meet all stakeholders criteria, due to limited resources or conflicting demands.
In this regard, several scholars verified the link between customer-perceived service quality
and employees satisfaction, enforcing the definition of service quality as a perceived
judgment (Snipes et al., 2005; Brown & Lam, 2008; Schlesinger & Heskett, 1991).
Nevertheless, most researchers in higher education have exclusively investigated students
view of service quality, neglecting employees perceptions of teaching processes as well as
administration services. In our study of faculty and administration staff, we bridge this gap by
adopting employees view of the service quality they provide, following Slattens et al.
(2011) recommendations.
Though most of the instruments
5
developed to evaluate customer satisfaction in educational
settings have gained acceptance in USA, Europe and Australia, their immoderate focus on
the teaching aspect of quality rather than students holistic experience has been proved to be
5
For example: Classroom Environment Scale (CES), My Classroom Inventory (MCI), Individualized
Classroom Environment Questionnaire (ICEQ), College Student Experiences Questionnaire (CSEQ),
Course Perception Questionnaire (CPQ), Student Evaluation of Education Quality Questionnaire (SEEQ).
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
107
their crucial drawback (Cuthbert, 1996; DiDomenico & Bonnici, 1996). In this regard, the
various educational instruments aiming at evaluating specific aspects of higher education
may fail to determine the level of satisfaction as a holistic experience of students which
requires an integrative and interpretive paradigm (Yeo, 2009).
Among the several measuring instruments have been developed aiming to capture and
explain a holistic view of service quality, SERVQUAL (e.g. Parasuraman et al., 1994), has
proved to be the most popular, as acknowledged even by its critics (e.g. Asubonteng et al.,
1996). The 22 items of this instrument are categorised into the reliability, tangibles,
responsiveness, assurance, and empathy service quality dimensions.
In our study of faculty and administration staff, two frameworks of service quality
measurement based on SERVQUAL were synthesized referring to quality of teaching and
administration quality: First, Owlia and Aspinwalls (1996) theoretical framework of service
quality with an emphasis on teaching aspects of education (academic resources, competence,
attitude, content), and second, Waughs (2001) model of administrative and supportive
services quality (tangibles, reliability and responsiveness, assurance and empathy).
In the context of the sustained growth and diversification of higher education systems, OECD
6
launched a program on Institutional Management in Higher Education (IMHE) putting special
emphasis on innovation, quality of teaching and learning improvement, the measurement of
performance and learning outcomes, access and regional competitiveness. In a student-
centered approach of education promoted by IMHE, teaching (bringing learning about),
assessment (finding out what has been learned), and university management (organizing
learning) should be aligned to be achieved the intended learning outcomes.
4. A conceptual framework of service quality in higher education
The conceptual framework of this chapter is based on Yeos work (2009) and links research
findings with the three interrelated aspects of service quality in higher education, namely
customer orientation, course design and delivery, and support services.
4.1 Customer orientation
In this study, customers are classified into three distinct yet interrelated groups: employers
of prospective HEI graduates, graduates, current students and parents. Performance of this
strategic objective is evaluated by the graduate survey and faculty and administrator
survey (figure 1). The latter field research investigates institutional culture, leadership,
service quality, organisational commitment, job satisfaction and job performance of
academic and administration staff.
4.2 Course design and delivery
Performance in this area is mainly assessed by the student survey, graduate survey and
faculty and administrator survey.
6
OECD, Assessment of Higher Education Learning Outcomes (AHELO) programme, Access on
25/8/2011, Retrieved from
<http://www.oecd.org/document/22/0,3746,en_2649_35961291_40624662_1_1_1_1,00>.
Quality Assurance and Management
108
4.3 Support services
Satisfaction in this area is evaluated by the support service survey. Quality expectations
include the availability of facilities such as computer and technical laboratories, library
services, internet facilities, as well as administrative and technical support.
Course
design &
delivery
Student survey
Support service
survey
Graduate
survey
Faculty &
Administrators
survey
Culture,
Leadership,
Service quality
Support
service
Customer
orientation
Service
Quality
Course
design &
delivery
Student survey
Support service
survey
Graduate
survey
Faculty &
Administrators
survey
Culture,
Leadership,
Service quality
Support
service
Customer
orientation
Service
Quality
Fig. 1. Conceptual framework of the chapter.
5. Quality assurance framework for higher education in Greece
Higher Education in Greece is provided by 38 HEIs through a binary system, as in other
European countries, of Universities (22) and Technological Education Institutes (16) all of
which are state entities operating under a regulation framework put in place in the early
eighties and is under reformation nowadays. Institutional autonomy of the Greek HEIs is
limited mainly to educational and research activities as shown in Table 1 based on the 6
criteria describing institutional autonomy as defined by OECD (Santiago et al., 2008).
A tremendous expansion of Higher Education in terms of institutions and number of
students emerged between 1999 and 2004 leading to 40% increase in student intake and two
fold increase in the number of academic departments/programmes offered (1998: 238
departments /56,000 annual student intake, 2010: 488/80,000), making Greece the top OECD
country in terms of increases in higher education expenditures as well as number of
students, and among the top three countries (Spain, Turkey and Greece) in terms of
increases in public spending per student (OECD, 2007). However, this expansion was not
guided by quality, as most decisions regarding expansion of specific institutions were taken
under the pressure of local and regional politics (viewed as transfer of income to regional
economies for boosting growth), without any formal accreditation procedures in place, and
mainly without a corresponding increase in academic staff.
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
109
INSTITUTIONAL AUTONOMY OF GREEK HEIs
Bold letters indicate areas of autonomy in HEIs,
Italics denote areas controlled by the state or non-existent in the Greek HE
INSTITUTIONAL
GOVERNANCE
STAFF STUDENTS FINANCE EDUCATION RESEARCH
Legal Status
Own infrastructure
Commercialization of
activities
Parameters for
internal decision
making
including freedom to
set up internal
governance structure
Selection
appointment
and dismissal of
academic staff
Academic career
structure
Career
advancement
Working
conditions (e.g.
salaries)
Selection of
students
Number of
students
enrolling.
a
Set and
differentiate
tuition fees
Borrow funds on
capital markets
Allocate funds as
the institution
sees fit.
b
Income
generating
activities
Right to build up
a portfolio of
assets and to
accumulate
financial capital
Supply of
Programmes,
including their
accreditation
Design
curriculum
Contents of
courses
Modes of
instruction and
delivery.
c
Design
research
Decide the
priorities of
research
a
Institutions Proposition. Final decision made by the ministry of Education (MoED)
b
Must be approved by the MoED
c
No part-time studies or non-degree studies. Open & Distance Learning offered only by the Hellenic
Open University.
Table 1. Autonomy of Greek HEIs
Furthermore, current issues such as internationalization, flexibility in curricula and
institutional diversity were not addressed leading to a situation where most of HEIs lack
any strategic planning and cannot exploit market opportunities while a significant number
of students show a low interest in their studies as it is evidenced by the fact that more than
50% of the total student population in universities do not complete their studies on time
(required years +1), according to the Greek national statistics service (EL. STAT., 2008).
Several reforms were attempted in the regulatory framework for HEIs, addressing mainly
peripheral and minor issues. Significant improvements that were introduced lately (since
2006) were neither welcomed by the academic community (i.e. introduction of quality
assurance currently implemented at 50% of academic units), nor could be applied because
of the economic crisis (i.e. contracts between Government and HEIs on four year operational
plans) nor have taken effect yet (i.e. limiting the maximum time required to complete degree
requirements - to take effect in 2012).
The establishment, in 2006, of the Hellenic Quality Assurance Agency for Higher Education
(HQAA, 2009)
7
, an independent agency governed by a board of academics, nominated by
the rectors and presidents of HEIs, marks the formal introduction of a QA system in Greek
HEIs. The role of the HQAA is to oversee and co-ordinate the QA process and external
assessments at HEIs, inform and advise the government on issues related to quality in
higher education and promote public awareness. In this way, accountability at department,
7
Greek Republic (2005) Quality assurance in higher education. Credit transfer and accumulation system
diploma supplement. Greek State Law 3374/2005.
Quality Assurance and Management
110
institution and government level is promoted, transparency is increased, and quality of
education and learning is improved.
6. Quality assurance at the Technological Education Institute of Larissa
The Technological Education Institute of Larissa (TEIL) is the largest HEI in Central Greece.
Established in 1983, comprises four faculties (Management and Economics, Agriculture and
Food Technology, Engineering, Health Studies, and Forestry & Wood/Furniture
Technologies) offering twenty (20) undergraduate and nine (9) postgraduate programs of
studies in applied sciences to a student population exceeding 17,000.
The institution had identified the need to introduce QA procedures long time before QA
became mandatory for HEIs. In 2002, TEIL invested in the introduction of quality processes
through the implementation of a pilot project, exploiting funding of the 2nd Community
Support Framework
8
. Self-evaluation reviews, followed by external audits and reviews for
the first time were generated at the departmental and institutional level.
As of 2007, the QA procedures pertaining to higher education institutions became
mandatory. TEIL was one of the first HEIs in the country to introduce the QA procedures,
where all of its departments (except four newly established departments that first had to
complete 5 years of operation) managed to deliver their first self-evaluation report by the
end of 2009, as compared to a national average of about 15% of all academic departments.
7. Quality Assurance System at TEIL
7.1 Establishment of quality units & committees within the institution
TEIL developed the necessary organizational structure to establish QA processes in
accordance with ENQA guidelines (ENQA 2005):
Each university should formulate a policy and procedures for the QA in their programs and commit
themselves to the development of a quality culture. To this end, a strategy should be devised with a
role for students and other stakeholders.
In particular, the following bodies were formed to plan, introduce and implement QA
policies and procedures:
Institutional Quality Assurance Unit (QAU): Headed by the Vice-President of Academic
Affairs, four academic staff members nominated by the General Assembly of the
institution, one member of the administrative/technical staff, one representative of the
undergraduate students, and one of the postgraduate students.
Departmental Internal Evaluation Work Teams (IEWT): A three to five member
committee of academic staff, nominated by the Assembly of Academic Staff of the
corresponding department, the main task of which is the issuance of the annual
departmental reviews, the release of the Internal Assessment Report (self-evaluation
review) every four years.
8
Community Support Framework (CSF) is a set of programmes funded jointly by the European and
National governments of member states in different sectors (i.e. education, transportation,
environment) to achieve economic and social cohesion in Europe.
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
111
7.2 Defining areas of evaluation and establishment of metrics
HQAA provided to all HEIs a framework of evaluation criteria which mainly address the
programme of studies, the teaching and learning process, interaction and cooperation with
industry society, internationalization, and research. The list of criteria was adapted to the
specific institutional environment of TEIL, and the sources and processes of data collection
were identified including the development of focused questionnaires addressed to students,
academic and administrative staff. Data are then processed to meaningful information
through the derivation of a series of performance/assessment metrics defined by the QAU
with the consensus of the academic departments. In addition, a set of metrics was
established for the evaluation of the performance of institutional-wide student related
services such as ICT, library, registry and administration facilities, athletic facilities,
dormitories, and student restaurant/cafeteria. Metrics were defined in such a way to qualify
the following characteristics:
To ensure systematic and uninterrupted collection of data so that time series are
produced
To provide the ability to aggregate from course level to institutional level where
appropriate
To produce comparisons within each department but also across faculties and
departments possible, and finally
To maintain compatibility with the national metrics defined by HQAA.
7.3 Quality assurance process
Following the general guidelines of HQAA, QA process at TEIL works on a four-year
cycle, as it is illustrated in fig. 2. The internal processes lead to the compilation of
self-evaluation reports, while the HQAA controls the external review process (i.e.
maintaining registry of reviewers, setting up the review teams, compiling the external
review reports).
The QAU prepared proper templates for the academic departments and organised a series
of workshops to train the members of the departmental IEWT.
The process of compiling the first self-assessment report was a rather long one (on the
average one and a half year) requiring laborious involvement from academic staff, and
especially those who staffed the self-evaluation team due to lack of administrative
personnel. The fact that historical data were not readily available, and had to be collected
from different sources and checked for validity, along with the requirement to build a five
year retrospective view of the main metrics, so that trends can be identified resulted in
many person hours to be allocated in this process. The provisions of MIS support for the
next rounds will facilitate the process to a large extend.
7.4 Early experiences of a quality odyssey
Introducing a QA system in an organization is a difficult task on its own since it affects
the business as usual status and introduces additional burden to personnel, especially
in an academic environment where most of the necessary quality processes are seen as
Quality Assurance and Management
112
non-academic, taking away valuable staff time from research and other academic
activities. Establishing a quality assurance system in a period where the vast majority of
the HE community is against formal QA processes (by the middle of 2009 - one and a half
year after the release of the HQAA guidelines only 10% of all academic departments had
submitted a self-evaluation report) makes the implementation of such a project even more
difficult.
Fig. 2. Quality assurance cycle of TEIL (proposed by the HQAA)
On the contrary, nowadays the majority of the faculty have recognised the need to
standardize and improve procedures related to the basic operations involved in the teaching
and learning processes. As a result, several academic departments and the QAU are
currently committed to contribute to the development of the core elements of the Quality
Management System, compatible with the ISO 9001:2008 requirements.
As many stakeholders have had different attitudes, interests, concerns regarding the
implementation of QA at TEIL, the task of recognizing and managing stakeholders
interest becomes vital for the success of the project. At TEIL, stakeholders are categorized
into four groups: institutions top management, institutions middle management,
academics and students, whose interests and actions prescribed by QAU are listed in
table 2:
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
113
Institutions top management: Interests (institutional level) Actions
Promote excellence at institution wide
level
Increase funding opportunities since non-
conformance with QA requirements may
lead to reduction in funding
Become more competitive
Make Quality a strategic issue for the institution.
Mention it in the mission statement
Introduce institution-wide policies (e.g. QMS-
ISO9001) across all departments. Link results to
allocation of funds
Commit resources to support QA process
Extend QA to administrative processes
Introduce QA in research
Institutions middle management:
Interests / Attitudes
(departmental level) Actions
Acceptance. A chance to reform curricula
and teaching
Opportunity. Identify weaknesses and areas
of improvement with much less internal
conflicts, since we are obliged to it
Rejection. Problems lie with the institution
not with the department
Necessary evil. Will do it because otherwise
could lose funds. Exploit the system.
Reluctance. Bureaucratic burden on
academic staff must be minimized
Support, diffuse and promote best practices
Diffusion of knowledge from departments that do it
successfully in regular meetings (one per semester)
Build information systems to support the processes
and reduce burden on staff
Even those who do it just due to their obligations
will realize some benefits. Encouragement of
efforts.
Academic Staff: Interests / Attitudes Actions
Opportunity: A chance to address /
provide input / become involved / discuss
issues at departmental level
Fears: Concerns for low ratings by
students, and/or low research output.
Increased insecurity.
Doubts: QA added value questionable.
reliability of student assessments
Increase awareness for low performance
Provide relative assessment reports (compared to
department median and quartiles) to all staff, while
protecting privacy
Discussions of annual report at departmental
meetings with the presence of students
Private meetings with Dept. Head for exceptional
cases. Plan corrective action
Take student assessment into account in contract
renewal of part-time staff
Students: Interests / Attitudes Actions
Enthusiasm: It is our turn to evaluate you
Expectations: Improvements to the teaching
/ learning process, Better infrastructures
Eagerness: No real changes happen. Too
many surveys no results.
Keep students informed. Discuss departmental self-
assessment review results in the presence of all
students.
Make results of external reviews known to
students.
Assign responsibilities. Make clear to them that
some may participate in the external review
Publicize results
Utilize input from student evaluation forms in
module reviews.
Table 2. Main stakeholders of TEIL services
Quality Assurance and Management
114
8. Institutional culture and leadership in higher education
In an era of economic crisis, HEIs are experiencing severe pressure from budget reduction,
and they are obliged to establish new rigid systems of quality assurance, new rules and
regulations and tight monitoring. As a result, academic leaders have been forced to develop
more competitive ways to explore and embrace new roles in order to tap on institutional
resources and core competences. Furthermore, the study of leadership in higher education
faces many difficulties due to the dual control systems, since leaders have to excel in
different contexts including administrative and academic departments and to deal with
mixed expectations (Lewis & Smith, 1994).
Even though HEIs may be considered as service institutions, as adaptive or entrepreneurial
entities, or as learning organisations (Askling & Kristensen, 2000) pursuing different
strategic orientations, a convergence on a sense of strong institutional leadership prevails
(Askling, 2001). Strong leaders are supposed to instigate change processes, set overarching
objectives and formulate the necessary strategies to accomplish them. Nevertheless,
empirical evidence support that some strong leaders with clear and predefined objectives
about the outcome of the evaluation process such as well-structured self evaluation reports
may have a negative impact, because they actually suffocate motivation and involvement
from the academic staff (Stensaker, 1999).
Thus, the lack of a participative culture, stimulating discussions and analysis for current and
future actions may conclude to disappointment and alienation among the staff or even
resistance to change. Institutional culture may be defined as the collective personality of a
HEI and reflected at the shared values, beliefs and behaviours of its members (Quinn, 1988).
Resistance to change from its internal members such as faculty and administrators is
reasonable, because change stimulates uncertainty, fear and suspicion in the stakeholders
engaged (Thomas, 1998). Elements of culture such as autonomy from external control,
adaptation, morale, conflict resolution, goal achievement, and formalization modify the
degree to which faculty and administrators accept policy or changes associated with QA
initiatives. Thus, the major challenge academic leadership has to deal with is to empower
members to discard old ways and obsolete values; essentially to unlearn and espouse new
values (Elwood & Leyden, 2000).
Many countries have established some sort of external evaluation system like ISO 9000 as well
as accreditation systems such as the Accreditation Board for Engineering and Technology
(ABET) and the European Quality Improvement System (EQUIS). Though, literature review
supports a positive effect of the aforementioned systems on organisations as a whole,
empirical evidence reveal that resistance to accreditation by employees may be attributed to
increased workload and bureaucracy, negative emotions of stress, insecurity and distrust, low
level of commitment, autonomy restraint, lack of knowledge and experiences, and limited
acceptance of the system (Van Kemenade & Hardjono, 2009). Hither, institutional leadership
and culture may act as catalysts to reap the benefits of accreditation.
8.1 Competing Values Model
Competing Values Model (CVM) is adopted in the study of faculty and administration staff,
for the operationalization of the institutional culture and leadership constructs (Deshpande
et al., 1993; Quinn 1988; Trivellas & Dargenidou, 2009a; 2009b). CVM has gained wider
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
115
acceptance among researchers as it has been validated not only as a model of culture (Kwan
& Walker, 2004; Smart 2003; Zammuto & Krakower, 1991), but also as an instrument for
other organizational phenomena such as organisational effectiveness, leadership (Quinn
1988; Hart & Quinn, 1993; Smart 2003; Trivellas & Geraki, 2008; Trivellas & Dargenidou,
2009a) and MIS effectiveness (Trivellas et al., 2006; Trivellas & Santouridis, 2011). CVM may
also be used as a tool for mapping organizations culture and leadership profiles and
conducting comparative analysis.
CVM emphasizes the competing tensions and conflicts across two axes, which form a four-
cell model (Fig. 3). The vertical axis extends from change and flexibility to control and order.
The horizontal one reflects the conflict between internal focus and external orientation to the
competitive environment. The intersection of these two dimensions determines four
quadrants, which establish four archetypes of organizational culture which correspond to
four leadership styles, namely adhocracy and adaptive leadership, clan and people
leadership, hierarchy and stability leadership, market and task leadership (fig. 3):
Adhocracy culture and adaptive leadership style values entrepreneurship, creativity,
proactiveness, resource acquisition, and innovativeness in discovering new markets and
directions for growth. They are characterized by flexibility, adaptability and external
orientation. The broker, who acquires resources for the institution and the innovator who
actively supports adaptation to changes are the two roles assigned to this orientation.
Clan culture and people leadership addresses employee commitment, empowerment, morale,
participation, teamwork, personal involvement and cohesiveness. They revolve around
trust, while they promote conflict resolution and confine resistance to change. Mentoring
subordinates and facilitating teamwork are the core activities attached to this style.
internal
Clan
flexibility
control
Rational model
Open Systems Human Relations
Internal Processes
external
Adhocracy
Hierarchy Market
People leadership Adaptive leadership
Stability leadership Task leadership
internal
Clan
flexibility
control
Rational model
Open Systems Human Relations
Internal Processes
external
Adhocracy
Hierarchy Market
People leadership Adaptive leadership
Stability leadership Task leadership
Fig. 3. CVM of culture and leadership styles
Hierarchy culture and stability leadership focuses on rules and regulations, order, stability,
control, documentation, information management, centralization of decision making,
standardization, dependability and reliability reflecting inward orientation and formalized
structures. This leadership style consists of the monitor role striving to ensure compliance,
track progress, and analyse results; and the coordinator one who maintains order and flow
of the system.
Quality Assurance and Management
116
Market culture and task leadership emphasize goal achievement, productivity, task
accomplishment, planning and setting objectives, and efficiency (Cameron & Freeman, 1991;
Deshpande et al., 1993), reflecting their extrovert and control orientation. This leadership
orientation covers the producer role that motivates individuals to take actions and the
director one, who clarifies expectations and establishes objectives.
There is growing evidence to support the view that institutional effectiveness as well as
leaders effectiveness depends on their cognitive and behavioural complexity, in order to
respond successfully to a wide range of situations that may in fact necessitate seemingly
conflicting and opposing behaviours (Smart, 2003; Denison et al., 1995; Hooijberg, 1996; Hart
& Quinn, 1993; Quinn et al., 1992). In similar vein, managers who balance competing
leadership roles are found to be more successful than those who adopt a restricted number
of roles (Hooijberg, 1996; Hart & Quinn, 1993). Accordingly, institutional success lies on
HEIs capability to develop an overall organizational culture that comprises a healthy
balance of the four archetypes proposed by CVM (Smart, 2003).
8.2 Leadership and culture profiles of faculty and administration staff
The field survey of faculty and administration members of TEIL, comprised 134 valid
questionnaires (response rate about 85%), and was based on a structured questionnaire
measuring leadership, culture, organisational commitment, job satisfaction and service
quality with 5-point Likerttype scales. Tapping on the advantages of CVM, the institutional
culture and leadership instruments adopted were validated by several researchers (Trivellas
& Dargenidou, 2009a, 2009b). In the same regard, higher education service quality was
operationalised by adopting both the quality dimensions emphasised on teaching aspects
proposed by Owlia and Aspinwall (1996), and Waughs (2001) measures of administration
quality. Affective and continuance components of Allen and Meyers (1990) organizational
commitment scale were also utilised. Job satisfaction construct was built upon Warr et al.
(1979) recommendations.
Regarding leadership styles, faculty considered people leadership as the most frequently
adopted one, while administration staff ranked task leadership as the dominant one. The
CVM based instrument applied as a diagnostic tool, reveals that TEIL is deficient in roles
emphasizing innovativeness, creativity, risk taking, monitoring, and networking with
external constituencies reflected on adaptive leadership.
Faculty Administration Sig.(t-test)
Leadership styles
Adaptive leadership 3,79 3,87 n.s.
Task leadership 4,19 4,65 p<0.05
Stability leadership 4,12 4,26 n.s.
People leadership 4,23 4,17 n.s.
Valid N 66 68
Table 3. Results of paired t-test analysis among leadership styles
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
117
Besides, t-test analysis was used to asses the statistical significance of the differences
between faculty and administration members of TEIL. Results summarized in table 3,
indicate that administration staff assigns higher priority to task leadership, in comparison
with academics. In fig. 4, the leadership profiles of faculty and administration staff are
illustrated.
Examining organisational culture, faculty preferred hierarchy and clan archetypes, while
administrators considered hierarchy as the dominant one (Trivellas & Dargenidou, 2009b).
The CVM suggests that TEIL is deficient in adaptability and growth potential, as well as in
market orientation. Moreover, findings reveal that administrators characterised less by a
clan culture reflecting loyalty, involvement and cohesiveness and more by a hierarchy one
related to formalized structures, rules and regulations, control and decision making
centralization, in comparison with academics (Trivellas & Dargenidou, 2009b).
These findings are in alignment with other researchers conclusions that public institutions
are characterised by bureaucratic cultures emphasizing on order and control and their
leaders adopt conservative and stability oriented roles (Hooijberg & Choi, 2001).
3,25
3,75
4,25
4,75
Flexibility
Adaptive leadership
External Focus
Task leadership
Control
Stability leadership
Internal Focus
People leadership
Faculty
Administrator
Fig. 4. Leadership profiles of faculty and administration members of TEIL
8.3 Culture, leadership, commitment and job satisfaction as antecedents of higher
education service quality
Education may be considered as a transformative process promoting the enrichment of
students knowledge, the empowerment of their ability to think critically and to challenge
their worldviews and assumptions (Yeo, 2009).
Extending this argument, a transformation from centralised hierarchical structures to
decentralisation, employee involvement and effective leadership is a prerequisite for TEILs
adaptation towards the establishment of QA processes. Given that these transformations
frequently cause employees reluctance or opposition to change, the successful introduction
Quality Assurance and Management
118
of a QA system depends on crucial factors such as culture (Trivellas et al., 2006), trust and
long term commitment to the organization (Zammuto & O'Conner 1992; Trivellas, 2009);
participation in decision making (Franz & Robey, 1986), and leadership (Smart, 2003). In
this way, leadership come to play a decisive role in the transformation of attitudes, and
management has to adopt the suitable human resource practices in order to facilitate
changes towards enhanced service quality. Furthermore, an adhocracy culture facilitates
critical thinking and experimentation to transcend taken-for-granted frames of reference,
leading this transformation process, and elevates effectiveness resulting to improved
customer satisfaction. Thus, the role of institutional culture, leadership, organisational
commitment and job satisfaction as antecedents of higher education service quality was
explored at TEIL.
Regarding institutional culture, higher education literature has consistently supported a
three-tier order, with clan or adhocracy dominated institutions being the most effective,
followed by those characterised by market culture, and lastly, hierarchical culture
archetypes are associated with low performers (Cameron & Ettington, 1988; Cameron &
Freeman, 1991; Smart et al., 1997). This research (Trivellas & Dargenidou, 2009b) provides
supporting evidence in this argument, as adhocracy culture significantly contributes in the
improvement of all aspects of higher education service quality. In other words,
intrapreneurship, experimentation, creativity, proactiveness, adaptation and innovativeness
are values conducive to enhanced quality of teaching and administration.
Quality of teaching building on academic resources, teaching expertise, theoretical and
practical knowledge, attitude of academic staff, and curriculum content, requires creative
spirit, experimentation, receptiveness to radical new ideas, tolerance to ambiguity and
aptitude to change. In a similar vein, flexibility, adaptation and proactiveness are the
foundations for the improvement of administration quality, referring to administration
contact, reliability, confidence, understanding and caring.
Examining leadership, the innovator (adaptive leadership) and the monitor (stability
leadership) roles were found to be the most powerful predictors of higher education
teaching quality (Trivellas & Dargenidou, 2009a). For example, the improvement of quality
of teaching competence (teaching expertise, theoretical and practical knowledge) requires
not only experimentation, risk taking, creativity, adaptation, and tolerance to ambiguity
reflected on the innovator but also compliance with rules and regulations, and
documentation as the monitor role prescribes. The latter role also fosters quality of teaching
attitude which emphasizes on the availability of academic staff for guidance and advice.
Nevertheless, the producer (task leadership) and the mentor roles (people leadership) were
negatively related to teaching attitude. Given that teaching attitude also refers to educators
empathy and understanding of students academics needs, sometimes in expense of
achieving the predefined goals, the producers objective to maintain productivity may cause
alienation and emotional detachment. On the contrary, too much intimacy and emotional
engagement with students under the mentor role, may lead to complications that disturb the
necessary political balance in human relations to ensure objectivity and fairness in decision
making.
Regarding administrators, the broker (adaptive leadership) and the facilitator (people
leadership) roles which are considered to be flexible in the resolution of problems and
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
119
supportive in building consensus towards its practical application, were strongly associated
with both dimensions of administration quality (reliability and responsiveness, assurance
and empathy). Reliability and responsiveness refer to administrative contact, provision of
administrative material, confident and dependable administrative advice, and advanced
notice of administrative changes. Accordingly, assurance and empathy concern
courteousness and confidence, individual contact and understanding, caring and secure
contact.
Investigating the relationships among job satisfaction, institutional commitment and
service quality (Trivellas & Dargenidou, 2011), academics teaching attitude, and satisfaction
stemming from rewards and recognition were proved to be strongly associated with
affective commitment, while availability of resources and academicians competence were
found to be related to continuance commitment. In a similar pattern, satisfaction with
rewards and recognition as well as reliability and responsiveness of administration quality
were linked with affective commitment of administrators.
9. Quality assessments by students
9.1 Questionnaire design and sample
The instrument for the students survey included 43 items referring to students self-
evaluation and the evaluation of course elements, course teachers and laboratory workshop
teachers. The structured questionnaires were answered by all students who were present in
the class session in the day the survey for each course took place.
The questionnaires were specifically designed for the aim of this research, according to
the basic principles of social sciences research (Gordon & Langmaid, 1988; Tull and
Hawkins, 1990; Doyle, 1998; Aaker et al. 2004). Finally, 22657 valid questionnaires were
analyzed, filled by students of 15 departments of the TEIL, during the academic year
2009-2010.
9.2 Results
Considering course content, the research revealed the strengths and the weak areas which
need improvement of all courses evaluated. In particular, the 3 strongest points include:
1. The material covered, met the objectives of the course
2. The subjects of the work-papers were given on time
3. The objectives of the courses are made clear to the students
On the contrary, the 3 weakest points of all courses evaluated are the following:
1. The usefulness of the exercise workshops is limited
2. The educational material (book, notes, extra bibliography), were not delivered on time
3. The quality of the exercise workshops is low.
Minor differences were detected among TEIL departments mainly due to peculiarities
associated with their relevant disciplines.
Moreover, the correlation analysis (Pearson correlation) brought to light some interesting
relationships:
Quality Assurance and Management
120
The early delivery of the course material (r = 0.716, p<0.01), as well as the use of the
course materials (r= 0.651, p< 0.001) are associated with better understanding of the
course objectives and content.
Teachers crucial component of successful guidance through the course is the provision
of edifying and analytical feedback to students (r = 0.795, p< 0.001).
Work papers examination contributes more than other assessment methods to the better
understanding of the subject by the students (r= 0.653, p < 0.001).
The level of difficulty of the course, is positively related to the workload and the credits
(ECTS) assigned to it (r = 0.373, p< 0.001).
The usefulness of the exercise workshops is strongly related to the assessment of their
overall quality (r = 0.749, p< 0.001).
Regarding faculty, the students of TEIL are quite satisfied from the responsiveness of the
academic staff towards their duties such as: their attendance to the courses, the prompt
correction of their project work and the time spent for collaboration with the students.
Exploring differences among students, senior students (at the 7th and 6th semester) are
evaluating higher their educators than the junior ones perhaps because, students become
more cognizant during the last years of studies, given that the modules they attend are more
specialized and practice-oriented.
The correlation analysis verified that the more the academic staff organize their teaching
materials, the better they succeed in stimulating the interest of the students for the course
(r= 0.788, p< 0.001) and the better they can analyze and present the concepts of the course in
a simple way, with interesting examples (r = 0.769, p < 0.001).
10. Support services
10.1 Sampling
The support services field survey adopted the stratified random sampling method. In other
words, the sample is not drawn at random from the whole population, but separately from a
number of disjoint strata of the population in order to ensure a more representative sample.
Stratification, that is the process of dividing members of the population into homogeneous
subgroups before sampling, was based on two criteria: (a) the department and (b) the year
of study of the student. The strata are mutually exclusive and collectively exhaustive. Then
random sampling is applied within each stratum. This often improves the
representativeness of the sample by reducing sampling error. Thus, almost 200 students
from 14 departments was the initial population (2800 in total), resulting to 2114 valid
structured questionnaires (75.5% response rate).
10.2 Results
The students of TEIL are found to be moderately satisfied from the suitability of the
classrooms and from the teaching equipment with significant differentiation among the
departments. The degree of overall satisfaction regarding the student dormitories is rather
low, while much higher is the degree of satisfaction regarding the library of the Institute.
However, the frequency of use of the Institute's library services is considered low
(average 1.53 times per month per student), while the existence of the Career Office is not
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
121
as known (only to 54.7% of the respondents) as it was expected to be. There is moderate to
low satisfaction on the services provided from the student restaurant, while the
satisfaction regarding the campus cafeteria is higher. The sports facilities are considered
as satisfactory, while the students use them 2.08 times per month on average. The degree
of the awareness of the internet and network services of the Institute is high (75.4%),
while the number of students who have an email account at the Institute is considered
rather small (67.2%).
High enough is the awareness of the students regarding the existence of the e-class platform
(69.4%), while finally, the web sites of the Institute is considered very useful for the
information of the students.
Among the most important students suggestions on the upgrade and improvement of
support services are the following:
The renovation and upgrade of infrastructure (classrooms, laboratory equipment).
The incitement of the students to use the books of the library more as well as the
enrichment of the library collection.
The more effective promotion of the role of the Career Office.
Incitement of the students to exploit ICT facilities (e.g. web-page) as well as the upload
of more courses on the e-class platform(departments should demand this by all
teaching staff whether permanent or not).
The renovation of the Halls of Residence Complex for student accommodation and the
introduction of more efficient administration.
The improvement of the service quality provided at the student restaurant.
11. Quality assessments by graduates
11.1 Questionnaire design and sampling
One additional initiative of the Institutional Quality Assurance Unit (QAU) of TEIL in 2010,
concerned the carrying out of a survey on the graduates of all the Departments for
professional and educational issues. So, a structured questionnaire was developed to be
filled from the graduates of all departments during the graduation day in December of 2010.
It consisted of 28 questions referring to the choice of the students to study in the institute
and in the specific Department they graduated from, as well as to the evaluation of the
graduates educational experiences, employment issues and their immediate professional
goals. The 12 out of the 14 departments at TEIL participated and 499 valid questionnaires
were collected.
11.2 Results
The fact that the Department of TEIL was one of the first choices of the graduates 4 to 6
years ago, in a percentage of 69.3%, is very encouraging. Of course, this choice depends on
the specific discipline of each department (Pearson chi
2
= 40.865, p<0.001). In particular, the
Departments that were on the list of graduates first choices, are: Infrastructure Engineering
(86.8%), Business Administration (82.9%), Electrical Engineering (83.3%), Business in
Tourism (82.1%), Mechanical Engineering (80.0%). On the contrary, the least preferred
Quality Assurance and Management
122
correspond to the Departments of: Animal Production (37.5%) and Forestry and Natural
Environment Administration (47.1%). Certainly, this does not imply that the above
preferences are also in effect today. The most important reasons for students selection of the
specific Department are the attractiveness of the subject of their studies (45.1%), and their
employment prospective (33.9%).
The fact that 88.9% of the graduates would recommend the Department that they have
studied in, to their friends, is very heartening. It is worth noticing that departments, which
were not the first preferences of the graduates at the time of their entrance to higher
education (e.g. Project Management, Electrical Engineering), will be strongly recommended
by them at the time of graduation to other candidates.
Finally, if the graduates had the chance today to choose their department, the vast majority
of them would choose the same one that they graduated from (e.g. Accountancy (93.9%),
Infrastructure Engineering (94.7%)).
Furthermore, the graduates from the Departments of TEIL, state that they are satisfied on
the most educational issues, ranking work placement and dissertation thesis on the top of
the list. Regarding correlation analysis, the following relationships were confirmed:
The increase of the quality of the workshops, leads to an increase on the sufficiency and
the quality of the acquired knowledge of the graduates (r = 0.614, p<0.001). The
sufficiency and the quality of the knowledge acquired in turn (r=0.714, p<0.001) as well
as educators relation with students (r = 0.551, p<0.001) determine to a large degree the
perceived quality of the course.
The suitability and quality of the curriculum is strongly related to the sufficiency and
the quality of the studies (r = 0.609, p<0.001), the effectiveness of the faculty (r=0.609,
p<0.001), but also the better link with the requirements of the labour-market (r=0.646,
p<0.001).
The strong association between the services provided by the library and faculty
effectiveness (r=0.516, p<0.001), verified the crucial role of the library in facilitating the
educational process by supporting not only educators and but also students as
highlighted in the previous session (10.2).
A proper work placement for the compulsory industrial training required in all
programs of study at TEIL, contributes positively to the higher quality of dissertation
thesis (r=0.588, p<0.001).
Moreover, as it was expected, the total score of the graduates found to be significantly
associated with the quality of the theory classes (ANOVA, F=3.190, p<0.001), the quality
of the textbooks (ANOVA, F=4.106, p<0.001), educators effectiveness (ANOVA,
F=2.759, p<0.005), the efficient link between curriculum and market labour demands
(ANOVA, F=2.707, p<0.005) and the quality of the curriculum (ANOVA, F=2.307,
p<0.05).
Finally, the three most important benefits that graduates of the TEIL have acquired
from their practical exercise are (a) the in depth understanding on the relevant subject
(73.1%), the practical application of knowledge (65.3%) and the experience gained
(63.7%).
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
123
12. Conclusions
This chapter aims to synthesize the experience gained and the conclusions drawn from the
investigation of leadership, institutional culture, students & graduates satisfaction and
teaching performance based on multiple stakeholders surveys (faculty, administration staff,
students and graduates) at the TEIL, in which a QA system is deployed in the last five years.
Regarding institutional culture, though adhocracy culture reflecting intrapreneurship,
creativity, proactiveness, adaptation and innovativeness significantly contributes in the
improvement of all aspects of higher education service quality, TEILs academics are
dominated by hierarchy and clan archetypes and administrators favour hierarchical values.
Thus, TEIL is suffering from a shortage in adaptability and growth potential, as well as in
market orientation, which may facilitate initiatives towards enhanced quality of teaching
and administration. In a similar vein, administrators should depart from values tied with
formalized structures, rules and regulations, control and decision making centralization in
order to be actively involved in QA procedures.
According to OB literature, institutional success lies on TEILs capability to develop an
overall organizational culture that comprises a healthy balance of the four archetypes
proposed by CVM, since adhocracy stimulates creativity and adaptation, clan triggers conflict
resolution, morale and cohesion, hierarchy boosts reliability, standardisation and
documentation, and market culture facilitates goal achievement and efficiency, all integral
components for a holistic view of QA.
A similar pattern emerged investigating leadership. Although, the innovator (adaptive
leadership) and the monitor (stability leadership) roles were found to be the most powerful
predictors of higher education teaching quality, faculty considered people leadership and
administration staff ranked task leadership as the dominant ones, both of them neglecting
the crucial role of adaptive leadership. In alignment with management literature, managers
who balance competing leadership roles are found to be more successful than those who
adopt a restricted number of roles. Consequently, effective faculty and administration
leaders should emphasize on all four leadership styles in order to improve quality of
teaching and administration building on a QA system.
Investigating the relationships among job satisfaction, institutional commitment and service
quality, academics teaching attitude, and satisfaction stemming from rewards and
recognition were proved to be strongly associated with affective commitment. Similarly,
satisfaction with rewards and recognition as well as reliability and responsiveness of
administration quality were linked with affective commitment of administrators.
Thus, effective HR practices and appraisal systems at TEIL should put special emphasis on
rewards and recognition of faculty and administrators in order to improve their affective
commitment and service quality provided.
In a different aspect, students of TEIL are quite satisfied from the responsiveness and
commitment of the academic staff towards their duties, while senior students are evaluating
higher their educators than the junior ones. As it was expected, the well organized teaching
material by faculty stimulates the interest of the students for the course and facilitates the
presentation of the relevant concepts in a simple way, with interesting examples.
Furthermore, students better understanding of the course objectives and content is
Quality Assurance and Management
124
associated with course material quality, teachers successful guidance and feedback as well
as the adoption of essays examination as assessment method.
Regarding support services, students stress the requirement of renovation and upgrade of
infrastructure (classrooms, laboratory equipment, and student restaurant), as well as the
necessity to be motivated in order to take advantage of library, Career Office and ICT services.
Under a different point of view, graduates are so contented with their studies that the vast
majority of them would recommend the Department that they have studied in, to other
candidates, even though this might not be their first preference at the time of their entrance
to higher education. Moreover, sufficiency and quality of the acquired knowledge as well as
teachers relation with students are associated with higher course quality as perceived by
graduates. Furthermore, quality of the curriculum, faculty effectiveness, and studies
connectivity with market requirements promotes the overall quality of the studies. Also, the
crucial role of the library in improving the educational process performance by supporting
not only educators and but also students was verified. Likewise, graduates total score
found to be significantly associated with the quality of the curriculum, the theory classes
and the relevant textbooks, as well as educators effectiveness and the associated links of
studies with market labour demands.
In the light of the above findings, QAU prioritise the following actions:
To raise quality of education and learning as a top policy item in the strategic agenda of
the institution, and make the continuous improvement of educational provisions and
quality of student learning a matter of the institutional mission statement.
To promote all stakeholders consciousness of QA processes as integral and effective
part of internal procedures overcoming impediments due to bureaucracy and useless
documentation.
To assure the reliability and transparency of QA processes.
To nurture a more balanced culture as proposed by CVM, with a special emphasis on
adhocracy and clan archetypes (e.g. instigating trust about private data protection,
publicity).
To suggest motivational and appraisal systems aiming to facilitate continuous
improvement at the institutional, departmental and individual levels.
To support institution as a whole, as well as departments to formulate operational
plans, set clear objectives related to learning objectives, design suitable curriculum
under multidisciplinary perspective, make decisions and take actions towards their
accomplishment.
To assist the alignment or conformance with guidelines imposed by Bologna
declaration, , OECD, European and Greek Qualifications Framework etc.
Setting the agenda for the future in alignment with OECD considerations, TEIL has to deal
with the following challenges (Altbach et al., 2009):
The phenomenon of massification, responding to mass demand as a result of the rise of
service industries and the knowledge economy.
Inequalities in access. Although, policy initiatives have focused on widening the
undergraduate participation in recent years, has not benefited all sectors of society
equally.
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
125
Increasing student mobility and internationalisation. Greece is a champion in the number of
students studying abroad regarding its population, with 4784 international students per
million of Greek residents (2009).
Teaching, learning and curricula. An increasingly diverse student body necessitates the
establishment of new systems for academic support and innovative approaches to
pedagogy taking into consideration indigenous philosophies, cultures, languages and
histories. In addition, several key demographic trends will modify the education
landscape such as female majority, the mix of the student population (e.g. international
students, older students, part-time and working students), different social groups,
disadvantaged groups, educators with varied employment contracts and part-time staff.
Quality assurance, accountability and qualifications frameworks. Quality assurance in higher
education, certification of institutions and the qualifications they award are tightly
linked with postsecondary education mission to provide graduates with new skills, a
broad knowledge base and a range of competencies to enter a more complex and
interdependent world.
Financing higher education and the public good-private good debate. Greek economic arduous
position poses a challenge to the traditional view of postsecondary education as a
public good and a 'social contract', contributing to society through educating citizens,
improving human capital, encouraging civil involvement and boosting economic
development. In response to these financial pressures, tertiary education has sought
solutions by initiating tuition fees on postgraduate studies and lifelong professional
training programs.
The private revolution. Private higher education is the fastest-growing sector worldwide.
The academic profession. Despite that possibly up to almost 50% of university teachers
have only earned a bachelor's degree globally, in Greece all permanent academic staff
hold a Ph.D. However, bureaucracy and administration often struggle their autonomy.
The research environment. Teaching, research and public service as primary higher
education objectives create constant tension and trade off with each other at different
levels leading to shift their interest and resource allocation away from research.
Information and communications technology. Distance education and other technology-
induced innovations render traditional HEIs obsolete though they can promote quality
offered.
13. Acknowledgment
This chapter is based on results and experiences of the project "Quality Assurance Unit of
TEI Larissa" which was co-financed by the EU (European Social Fund) and National funds
in the framework of the Operational Programme "Education and Long Life Learning".
14. References
Allen, N.J. & Meyer, J.P. (1990). The measurement and antecedents of affective, continuance
and normative commitment to the organization. Journal of Occupational Psychology,
vol.63, pp. 1-8
Altbach Ph., Reisberg L. & Rumbley L. (2009), Trends in Global Higher Education: Tracking an
Academic Revolution. A Report Prepared for the UNESCO 2009 World Conference on
Higher Education, United Nations Educational, Scientific and Cultural Organisation,
UNESCO, Paris, France.
Quality Assurance and Management
126
Askling, B (2001). In search of new models of institutional governance: Some swedish
experiences. Tertiary Education and Management, Vol.7, No.2, pp. 197210.
Askling, B. & Kristensen, B. (2000). Towards the Learning Organisation: Implications for
institutional governance and leadership. Higher Education Management, Vol.12,
No.1, pp. 17 42.
Asubonteng, P.; McCleary, K.J. & Swan, J.E. (1996). SERVQUAL Revisited: A critical review
of service quality. The Journal of Services Marketing, Vol.10, No.2, pp. 62-81.
Bonvillian, G. & Dennis, T.L. (1995). Total quality management in higher education:
opportunities and obstacles, in Sims, S.J. & Sims, R.R. (Eds), Total Quality
Management in Higher Education: Is it Working? Why or Why Not?, Praeger, Westport,
CT, pp. 37-50.
Brown, St.P. & Lam, S.K. (2008). A Meta-Analysis of Relationships Linking Employee
Satisfaction to Customer Responses. Journal of Retailing, Vol.84, No.3, pp.243255.
Cameron, K. & Smart, J.C. (1998). Maintaining effectiveness amid downsizing and decline in
institutions of higher education. Research in Higher Education, Vol.39, pp. 65-86.
Cameron, K.S. & Ettington, D.R. (1988). The conceptual foundations of organizational
culture. In: Smart, J. C. (ed.), Higher Education: Handbook of Theory and Research (Vol.
4), Kluwer Academic Press, Dordrecht, The Netherlands, pp. 356396.
Cameron, K.S. & Freeman, S.J. (1991). Cultural congruence, strength, and type: Relationships
to effectiveness. Research in Organizational Change and Development, Vol.5, pp.2358.
Crosby, P. (1979). Quality is free: The art of making quality certain. McGraw-Hill, New York, USA.
Cuthbert, P.F. (1996). Managing service quality in HE: Is SERVQUAL the answer? Part 1.
Managing Service Quality, Vol.6, No.2, pp. 1116.
Denison, D. R.; Hooijberg, R. & Quinn, R.E. (1995). Paradox and performance: Toward a
theory of behavioral complexity in managerial leadership, Organization Science,
Vol.6, No. 5, pp. 524540.
Deshpande, R.; Farley J.U. & Webster F.E.Jr (1993). Corporate Culture, Customer
Orientation, and Innovativeness in Japanese Firms: A Quadrad Analysis, Journal of
Marketing, Vol. 57 (January), pp. 23-27.
DiDomenico, E. & Bonnici, J. (1996). Assessing service quality within the educational
environment. Education, Vol.116, No.3, pp. 353-360.
Drucker, P. (1985). Innovation and entrepreneurship. Harper & Row, New York, USA.
EL.STAT. (Hellenic Statistical Authority), (2008), Universities (students, Institution, academic
staff) (beginning & end of the academic year) 2008 [online]. Available from
http://www.statistics.gr/portal/page/portal/ESYE/
Elwood, L.P & Leyden, V.M. (2000). Strategic planning and cultural considerations in
tertiary education systems: the Irish case, Scandinavian Journal of Educational
Research, Vol.44, No.3, pp. 308-323.
ENQA, (2005). Standards and guidelines for quality assurance in the European higher education
area. Helsinki, European Association for Quality Assurance in Higher Education.
Franz, C.R. & Robey, D. (1986). Organizational Context, User Involvement and the
Usefulness of Information Systems, Decision Sciences, Vol.7, pp. 329-355.
Garvin, D. A. (1988). Managing quality. The Free Press, New York, USA.
Hart, S.L. & Quinn, R.E. (1993). Roles executives play: CEOs, behavioral complexity and
firm performance, Human Relations, Vol. 46, No. 5, pp. 543576.
Hooijberg, R. & Choi, J. (2000), Which leadership roles matter to whom? An examination of
rater effects on perceptions of effectiveness, Leadership Quarterly, Vol.11, No.3, pp.
341364
Challenges for Quality Management
in Higher Education Investigating Institutional Leadership, Culture and Performance
127
Hooijberg, R. (1996). A multidirectional approach toward leadership: An extension of the
concept of behavioral complexity, Human Relations, Vol. 49, No. 7, pp.917946.
HQAA, (2009). Report on the quality of Greek higher education in 2008 [online]. Available
from: http://www.adip.gr [Accessed 13 June 2011].
Juran, J. (1945). Management of inspection and quality control. Harper & Bros, New York, USA.
Koslowski III, F. A. (2006). Quality and assessment in context: A brief review. Quality
Assurance in Education, Vol.14, No.3) pp. 277-288.
Kwan, P. & Walker A. (2004). Validating the Competing Values Model As a Representation
Of Organizational Culture Through Inter-Institutional Comparisons, Organizational
Analysis, Vol.12, No.1, pp. 21-37.
Lewis, R.G & Smith, D.H. (1994). Total Quality in Higher Education, Delray Beach, FL: St.
Lucie Press.
Morley, L. (2003). Quality and Power in Higher Education, SRHE & Open University Press, ed.
Heather Eggins, McGraw Hill, England.
OECD, (2007), Education at a Glance: OECD Indicators 2007, OECD, Paris, France.
Owlia, M.S. & Aspinall, E.M. (1996). A framework for the dimensions of quality in higher
education, Quality Assurance in Education, Vol. 4, No. 2, pp. 12-20
Palomba, C.A. & Banta, T.W. (1999). Assessment Essentials: Planning, Implementing, and
Improving Assessment in Higher Education, Jossey-Bass, San Francisco, CA.
Parasuraman, A.; Zeithaml, V. & Berry, L. (1994). Alternative Scales for Measuring Service
Quality: A Comparative Assessment Based on Psychometric and Diagnostic
Criteria, Journal of Retailing, Vol.70, No.3, pp. 201-30.
Quinn, R. E. (1988), Beyond Rational Management, Jossey-Bass Publishers, San Francisco.
Quinn, R. E.; Spreitzer, G.M. & Hart, S.L. (1992), Integrating the extremes: Crucial skills for
managerial effectiveness. In: Srivastva, S., and Fry, R. E. (eds.), Executive and
Organizational Continuity: Managing the Paradoxes of Stability and Change, Jossey-
Bass, San Francisco, pp. 222252.
Rinehart, G. (1993). Quality education: Applying the philosophy of Dr. W. Edwards Deming to
transform the educational system. Milwaukee: ASQC Quality Press
Santiago, P.; Tremblay, K.; Basri, E. & Arnal E. (2008). Tertiary Education for the Knowledge
Society, vol.1, OECD 2008, ISBN 978-92-64-04652-8, pp.80-82.
Schlesinger, L.A. & Heskett, J.L. (1991). Breaking the cycle of failure in services, Sloan
Management Review, Vol. 32, No. 3, pp. 17-28.
Seymour, D.T. (1992), On Q: Causing Quality in Higher Education, Macmillan, New York, NY.
Sitkin, S.B.; Sutcliffe, K.M., & Schroeder, R.G. (1994). Distinguishing control from learning in
Total Quality Management: A contingency perspective. Academy of Management
Review, Vol.19, No.3, pp. 537564.
Slatten, T.; Svensson, G. & Svri, S. (2011). Service quality and turnover intentions as
perceived by employees, Antecedents and consequences, Personnel Review, Vol.40,
No.2, pp. 205-221,
Smart, J.C. (2003). Organizational Effectiveness of 2-year Colleges: The Centrality of Cultural
and Leadership Complexity, Research in Higher Education, Vol. 44, No. 6, pp. 673-703
Smart, J.C.; Kuh, G.D. & Tierney, W G. (1997). The role of institutional cultures and decision
approaches in promoting organizational effectiveness in two-year colleges. Journal
of Higher Education, Vol.68, pp. 256281.
Snipes, R.L.; Oswald, Sh.L.; LaTour, M. & Armenakis, A.A. (2005). The effects of specific job
satisfaction facets on customer perceptions of service quality: an employee-level
analysis, Journal of Business Research, Vol.58, pp. 1330 1339
Quality Assurance and Management
128
Stensaker, B. (1999). In Charge? (Absent) academic leadership during external assessments,
International Journal of Educational Management, Vol.13, No. 6, pp. 266271.
Thomas, H. (1998). Cultural leadership. In Packwood, T. and Turner, C. (Eds), Hierarchy,
Anarchy and Accountability. New York, NY: McGraw-Hill.
Trivellas, P. & Dargenidou, D. (2009a). Leadership and Service Quality in Higher Education:
The case of the Technological Educational Institute of Larissa, International Journal
of Quality and Service Sciences, Vol. 1, Issue 3, pp. 294-310, ISSN 1756-669X
Trivellas, P. & Dargenidou, D. (2009b). Organisational Culture, Job Satisfaction and Higher
Education Service Quality, The case of Technological Educational Institute of
Larissa, the TQM Journal, Vol. 21, No. 4, pp. 382-399, ISSN 1754-2731
Trivellas, P. & Dargenidou, D. (2011). Service quality, Job Satisfaction and Organizational
Commitment in Higher Education. An Empirical Study of Faculty and Administration
Staff. Proceedings of ICQSS 2011, 14th QMOD conference on Quality and Service Sciences,
pp. 1755-1774, ISBN: 84-8081-211-7, San Sebastian, Spain, August 29-31.
Trivellas, P. & Geraki, A. (2008). Investigating Principals Leadership Profile in Secondary
Education, Proceedings of ICMMS 2008 International Conference on Management &
Marketing Sciences, pp. 599-602, ISBN 13 978-1-84816-509-0, Imperial College Press
Conference Proceedings, Athens, Greece, May 23-25.
Trivellas, P. & Santouridis, I. (2011), The impact of Management Information Systems
effectiveness on task productivity, task innovation, customer focus and
management control-The case of the Greek Banking Sector, proceedings of 3rd IEEE
International Conference on Information Management and Engineering (IEEE ICIME
2011), pp. 257-261, ISBN: 978-1-61284-240-0, Zhengzhou, China, May 21-22, 2011
Trivellas, P. (2009). Impact of Strategic Human Resource Management on organisational
commitment and employee satisfaction in ISO 9001 certified firms: An empirical
study in the Central of Greece, Proceedings of ICESAL 2009, 6th International
Conference on Enterprise Systems, Accounting and Logistics, pp 1-16, ISBN 978-960-287-
092-1, Thessaloniki, Greece, May18-19, 2009
Trivellas, P.; Reklitis, P. & Santouridis, I. (2006). Culture and MIS effectiveness Patterns in a
Quality Context: A case study in Greece, International Journal of Knowledge, Culture
and Change Management, Vol. 6, No. 3, pp 129-144, ISSN 14479524, 14479575.
Van Damme, D. (2002). Trends and models in International Quality Assurance and Accreditation
in Higher education in relation to trade in education services, OECD/US Forum on
Trade in Educational Services, Washington, D.C. USA, 23-24 May.
Van Kemenade, E. & Hardjono, T.W. (2009). Professionals freaking out: the case of
accreditation in Dutch higher education, the TQM Journal, Vol. 21, No. 5, pp. 473-485.
Warr, P.; Cook, J. & Wall, T. (1979). Scales for the measurement of of some work attitudes
and aspects of psychological well-being. Journal of Occupational Psychology, Vol.52,
No.2, p. 129-148.
Waugh, R.F. (2001), Academic staff perception of administrative quality at universities,
Journal of Educational Administration, Vol. 2, No. 2, pp. 172-188.
Yeo, R.K., (2009), Service quality ideals in a competitive tertiary environment, International
Journal of Educational Research, Vol.48, pp. 6276
Zammuto, R.F. & Krakower, J.Y. (1991). Quantitative and Qualitative Studies of Organisational
Culture, Research in Organisational Change and Development, Vol.5, pp. 83-114.
Zammuto, R.F. & O' Connor, E.J. (1992). Gaining advanced manufacturing technologies'
benefits: the roles of organisation design and culture, Academy of Management
Review, Vol. 17, No. 4, pp. 701-28.
7
Implementing Quality Management Systems
in Higher Education Institutions
Maria J. Rosa
1,2
, Cludia S. Sarrico
1,3
and Alberto Amaral
1,4
1
CIPES Centre for Research in Higher Education Policies,
2
DEGEI, Universidade de Aveiro,
3
ISEG, Universidade Tcnica de Lisboa,
4
A3ES Agncia para a Avaliao e Acreditao do Ensino Superior,
Portugal
1. Introduction
In the last decades, several factors have contributed to raising public concern over
higher education institutions quality, leading to the emergence of quality measurement and
improvement devices such as performance indicators, accreditation, programme and
institutional assessment and quality audits, and there have been attempts to import models
from the private sector into higher education systems and institutions (Sarrico, Rosa,
Teixeira and Cardoso, 2010).
This has led to the emergence of a debate on the applicability of quality management
principles, methodologies and tools to the higher education sector. As reported in the
literature on higher education, several voices have been heard about the non-applicability at
all of those management theories, especially because they derived from industry and had
nothing to do with the higher education ethos (Harvey, 1995; Maassy, 2003; Birnbaum, 2000;
Kells, 1995; Pratasavitskaya and Stensaker, 2010). Other authors gave a more nuanced view
on the subject, claiming that although higher education institutions were not companies
some of the basic principles and tools could be applied as long as they were instruments at
the service of institutions and their governance and management boards, subject to the
institutions academic mission, goals and strategies (Williams, 1993; Harvey, 1995; Dill, 1995).
Although the debate is old, no firm conclusions have been reached so far. It seems,
nevertheless, that in Europe, due to the developments on quality assurance that followed the
Bologna Declaration, higher education institutions are now being forced to implement
internal quality assurance systems based on the European Standards and Guidelines (ESG).
Apparently the way these systems should be organised and function is not that specified,
apart from the need to comply with the seven standards established in the ESG Part I,
being up to each institution to define and implement its own quality assurance system in
accordance with its mission, goals and institutional culture (Santos, 2011). So maybe this
is the time to look again at quality management principles, tools and frameworks and
see if they can be of some help to the development of these quality assurance or
management systems.
Quality Assurance and Management
130
The aim of this chapter is to revisit the debate on the applicability of quality management to
the higher education sector, discussing its possibilities and impossibilities, in the light of
the new developments in quality assurance in European higher education, namely the
guidelines put forward in ESG Part I, since these provide indications for the institutions
to set up their own systems. Some of the most well known quality management
frameworks, such as the ISO 9001 standard, the EFQM Excellence Model and the
Balanced Scorecard will be discussed on the basis of their usefulness for implementing
quality management systems in higher education institutions. More specifically one will
try to highlight how these quality management frameworks may be used to implement the
seven standards for quality assurance established in the ESG Part I within HEIs, through
an analysis of the criteria/indicators/requirements of the frameworks that accommodate
each one of the standards. According to Sarrico et al. (2010) all these models propose to
assess higher education institutions as a whole, including not only its teaching and
research missions, but also other activities and, notably, institutional management, which is
in the authors opinion the area of quality management that needs to be developed and
improved further in higher education. This discussion is particularly relevant since
according to Pratasavitskaya and Stensaker (2010), the analysis of models and approaches of
quality assurance at the institutional level has been rarely addressed in the literature, which
is considered by the authors as an unfortunate situation since
quality management, at least theoretically, can have potential benefits; for example,
with respect to identifying available options higher education institutions may choose
from in order to respond to increasing external pressures for demonstrating academic
output (Pratasavitskaya and Stensaker, 2010: 38).
2. Total quality management (TQM) and higher education: A long debate
Rosa and Amaral (2007) argue that it is difficult, maybe even impossible, to find a unique
and unequivocal definition of TQM and that the better one can do is to put forward
a set of principles that underlie most TQM approaches. To Campatelli et al. (2011: 696),
TQM is an approach to management characterised by the definition of some general and
inspiring guiding principles and core concepts that represent the way the organisation is
expected to operate in order to obtain high performance. Both the ISO 9001 standard
(ISO, 2005) and the EFQM Excellence model (EFQM, 2010) have established these
principles and core concepts, which are usually used as the rationale to develop quality
management systems within organisations (see Figure 1).
Goldberg and Cole (2002), referred in Calvo-Mora, Leal and Roldn (2005) consider TQM
as being a strategic option and an integrated management philosophy for organisations,
which allow them to reach their objectives effectively and efficiently and to achieve a
sustainable competitive advantage (Calvo-Mora et al., 2005: 742). According to Campatelli
et al. (2011), TQM has been initially applied with good results in private sector
organisations, being latter on used also in the public sector, namely in health care and
education organisations.
Williams (1993: 229) refers to the rise of TQM in higher education as a product of the
market ideologies of the 80s and of the managerialism that accompanied it. From the
very beginning its emergence in higher education led to heated debates on its
Implementing Quality Management Systems in Higher Education Institutions
131
applicability, originating what may perhaps be designated as two schools of thought.
On one side the quality management literature presented the idea that education,
including higher education, was another field where quality management principles,
methodologies and tools could perfectly be applied leading to better schools, where more
motivated teachers and students contributed to an improved teaching/learning process,
being capable of doing more with the same or even with less (Sahney, Banwet and Karunes,
2004; Campatelli et al., 2011; Cruickshank, 2003): It is inevitable for quality management
processes, which have helped to transform business and overcome their quality
problems, to be transferred to the field of education (Peak, 1995, referred in Calvo-
Mora et al., 2011: 741). According to this school of thought the reasons behind the
adoption of quality management, namely TQM, in higher education lied on the need higher
education had to react to the increasing pressures and demands from its stakeholders,
finding itself in a market-oriented environment where internal and external customers
needed to be satisfied and even delighted. Furthermore in a time of declining resources,
combined with higher education rising costs and an increasing pressure to provide
high quality education (Cruickshank, 2003), there was the need of doing more with
less. The identification and application of the relevant concepts of TQM to each and
every aspect of academic life; that is, to the teaching, learning and administrative activities
(Sahney et al., 2004: 145) appeared then as a viable solution.
Fig. 1. The TQM principles that underlie the ISO 9001: 2008 standard (quality management
principles) and the EFQM Excellence Model (concepts of excellence) (adapted from ISO
(2005) and EFQM (2010))
On the other side, the higher education literature generically tended to put forward the idea
that schools (and higher education institutions) were a very different type of organisation,
with a different ethos and particular characteristics that made difficult, or even impossible,
to implement a management philosophy derived from industry (Birnbaum and Deshotels,
1999, and Seymour, 1991, cited in Pratasavitskaya and Stensaker, 2010; Massy, 2003;
Birnbaum, 2000; Kells, 1995). In fact, although not much publicised, it is known that in
several institutions the application of quality management did not contribute to internal
quality improvement (Harvey, 1995). Quality management is not a management approach
easily applied to higher education institutions, especially because the academic culture of
these organisations is quite strong and resistant to its concepts, principles and practices.
And this resistance begins with terminology. Terms such as product, client, empowerment
or even strategy, not to mention TQM or reengineering do not easily resonate in higher
Quality Assurance and Management
132
education institutions. For Massy (2003:165) The greatest resistance to quality process
improvement comes from professors who think its just another business-oriented fad. The
language of some TQM advocates contributes to this view () Customer, scientific method
and removal of all forms of waste are sure to raise the hackles of academics. According to
Houston (2008), even the definition of quality that prevails in industrial/business
environments, based on the idea of satisfying customers needs and expectations, is
problematic in higher education. The fact is that higher education has a multitude of
interested parties, with different perspectives about its role. Houston (2008) identifies
interlinked environments and expectations in which universities operate that correspond to
looking at these institutions from three different perspectives: economic, societal and
educational. Labelling any of the groups included under these perspectives, or in their
connections, as the customers that define quality makes higher education demands over-
simplified: Customer-focused definitions of quality fit the context of higher education
poorly. (Houston, 2008: 63).
Seymour (1991, referred in Pratasavitskaya and Stensaker, 2010) mentioned the following
factors as reasons for the unsuccessful application of TQM to higher education:
resistance to change; insufficient administration commitment; high time investment due to
personal training; difficulty in applying TQM tools to the HEIs environment; little
experience of team leaders and staff in team-work; and the concerns HEIs have with their
own results not being sufficient enough. Rosa and Amaral (2007) add the absence of
effective communication channels; the difficulty in measuring an HEIs results; the co-
existence of several purposes and objectives for the HEI; an emphasis in the individualism
and a significant degree of internal competition; the bureaucracy affecting decision-
making circuits; and the absence of a strong leadership, highly committed to the ideas
and principles it wants to implement and capable of involving all the institutions
members.
To Birnbaum (2000) the most relevant barrier to quality management implementation in
higher education has to do with the need for a compromise between it and the
traditions, values and purposes of higher education institutions. According to the author,
total quality management has probably been the first management tool capable of
provoking a serious discussion not just about its technical merits and demerits, but also
about its educational and social implications. For Kells (1995: 458): An extremely
important question is the extent to which managerial innovations can be successfully
adapted to the environments they seek to serve, rather than, as is feared by many in the
higher education world, there being the expectation that the institution must comply with
the method.
In the higher education literature there are nevertheless more nuanced views on the
subject, claiming that although higher education institutions are not companies some of the
basic principles and tools can be applied as long as they are instruments at the service of
institutions and their governance and management boards, subject to the institutions
academic mission, goals and strategies (Rosa, 2003). Williams (1993) considers that
continuous quality improvement; quality consistency; participation of academics, students
and non-academic staff; satisfaction of the clients needs; and the existence of
management procedures that reinforce quality are a number of quality management
principles that nobody would consider irrelevant within the higher education context. In
Implementing Quality Management Systems in Higher Education Institutions
133
the authors opinion all these principles can significantly contribute to the development of
massified higher education systems and their institutions, either explicitly oriented
towards the market or not. Harvey (1995) considers that some TQM aspects can be
adapted to higher education institutions and defends a new collegialism that
emphasises professional accountability and cooperation, reflecting two quality management
key elements: delegation of responsibility for quality and teamwork. The new collegialism
emphasises the continuous improvement within the existent academic framework. Dill
(1995) assumes a not very different perspective but replaces the notion of social capital
for Harveys new collegialism. For Dill (1995) there are also some important lessons that
higher education institutions can learn from quality management, the most relevant being
the central place that social capital should occupy inside organisations. Dill (1995)
argues that efforts directed at enhancing quality should then be put into identifying
networks and integration mechanisms that promote social capital development, leading to
increased academic cohesion, communication and integration. Following this line of
reasoning, examples of empirical studies aimed at probing the possibility of applying
quality management tools and models for evaluating and improving the quality of
management, services and processes of higher education institutions have been put
forward. Examples include the application of the EFQM Excellence Model to higher
education institutions, as illustrated by the works of Rosa (2003), Rosa and Amaral
(2007), Campatelli, Citti and Meneghin (2011), Osseo-Asare Jr. and Longbottom (2002)
and Calvo-Mora, Leal and Roldn (2005); the use of the Balance Scorecard (see, for
example, Sahney, Banwet and Karunes, 2004; Asan and Tanyas, 2007 and ONeill et al.,
1999); the application of the 14 Deming Principles (Redmond, Curtis, Noone and
Keenan, 2008); the development of a TQM educational excellence model (Sakthivel and
Raju, 2006); or the conduction of benchmarking exercises to improve institutions practices
and performance (Jackson and Lund, 2000).
3. New developments in quality assurance in European higher education
The need for quality management systems
The quality concept in higher education can be said to be as old as the medieval ages (Rosa
and Amaral, 2007), being possible to distinguish already in the 13
th
century two models of
quality assessment: the French model of vesting control in an external authority the
archetype of quality assessment in terms of accountability and the English model of
a self-governing community of fellows an example of quality assessment by means of
peer review. These two models address two important dimensions of quality, extrinsic
and intrinsic, the last one being dominant over the centuries in the academe. In fact the
extrinsic dimension only has become relevant in the 1980s when the concerns with higher
education quality, its assessment, management and improvement started to be a central
policy issue for governments and society (Liaison Committee of Rectors Conferences,
1993). This change in the approach to quality in higher education can be linked to a
number of factors, such as (Rosa and Amaral, 2007: 183):
the massification of higher education, changes in the relationship between higher
education institutions and governments (from a model of state control to a model of
state supervision), the increasing role of market regulation, increasing institutional
autonomy and the problems of the principal/agent, and the loss of trust in universities
associated with new public management.
Quality Assurance and Management
134
The 1980s and the decades that followed represented then a movement in the balance
between two distinctive objectives higher education quality assessment has: accountability
and quality improvement the first objective being mainly pursued by governments and
the second one by higher education institutions and academics. In fact there has been a
rising prevalence of the accountability objective over the improvement one, leading to an
increased attention by European governments and other institutions over higher education
qualities, this is the qualities found in the services provided to society by higher
education institutions (Rosa and Amaral, 2007).
From the 1980s onwards the development of quality assurance in Europe was fast.
According to Schwarz and Westerheijden (2004) in the early 1990s fewer than 50% of
the European countries had initiated quality assessment activities at supra-institutional
level, while in 2003 all countries except Greece had entered into some form of supra-
institutional assessment. Furthermore if state approval and accreditation schemes in the
years 1998 and 2003 are compared, an overwhelming movement towards accreditation is
observed. In fact, all recently implemented quality systems are based on accreditation
(e.g. Austria, Germany and Norway), while old systems based on quality assessment were
replaced by accreditation systems under the aegis of independent accreditation agencies
(Flanders, The Netherlands and Portugal) (Amaral and Rosa, 2010). A key contributor to
this movement has been the Bologna Declaration, signed by 29 European countries in 1999,
and the process that followed. One of the main objectives of the Declaration was to
encourage European cooperation in the quality assurance of higher education with a
view to developing comparable criteria and methodologies. According to Schwartz and
Westerheijden (2004: 36), the Bologna process has been an important driver for change
with regard to quality in steering mechanisms.
Following the Bologna process, the European Ministers of Education adopted in 2005
the Standards and Guidelines for Quality Assurance in the European Higher Education
Area (ESG) and in 2007 established the European Quality Assurance Register for Higher
Education (EQAR). The ESG are a set of standards, procedures and guidelines that
higher education institutions and accredited agencies (the ones responsible for assessing
and accrediting higher education programmes and institutions) should follow in order to
implement, assess and accredit quality assurance systems in the European Higher
Education Area (EHEA). According to ENQA (2007) they constitute a first step to the
establishment of a widely shared set of underpinning values, expectations and good
practices in relation to quality and its assurance, by institutions and agencies across the
EHEA, aiming at providing a source of assistance and guidance to both HEIs and
agencies, while contributing to a common frame of reference. The ESG are divided in
three parts: Part 1, referring to standards and guidelines for internal quality assurance
within higher education institutions; Part 2, referring to standards for the external
quality assurance of higher education; and Part 3, referring to standards for external
quality assurance agencies.
Although ENQA (2007: 13) claims it is not the intention that these standards and
guidelines should dictate practice or be interpreted as prescriptive and unchangeable, the
truth is that the mere existence of the ESG Part 1 led governments and higher education
institutions to start paying more attention to the implementation of quality assurance
systems within higher education institutions. In fact Santos (2011) refers that in all
Implementing Quality Management Systems in Higher Education Institutions
135
countries that have signed the Bologna Declaration institutions are obliged to implement
internal systems for quality assurance, in accordance with the fundamental idea that
quality and quality assurance are primarily their responsibility. The author also mentions
that in most countries the way these internal quality assurance systems are organised
and function is not that specified, being up to each institution to define and implement its
own system.
Furthermore another relatively recent development may also promote the
implementation of quality management systems within European higher education
institutions. It is the so-called quality enhancement movement, which can be seen as an
attempt by universities to regain trust from society by restating that quality is their major
responsibility and that the role of outside agencies should be limited to quality audits.
The idea is not that new, since at the beginning of the nineties a similar approach was
proposed in the US by academics, the basic idea being that accreditation should be
transformed into audits of the institutions internal quality control procedures and self-
examination schemes (Trow, 1996).
Even if in the UK the Quality Assurance Agency (QAA) has defined quality
enhancement as the process of taking deliberate steps at institutional level to improve
the quality of learning opportunities, this still remains a not well-defined concept, with
institutions still looking for their own definition of it (HEA, 2008). Nevertheless there are a
number of common patterns to every institutional approach. A Higher Education
Academy report (HEA, 2008) and a study conducted by Fillipakou and Tapper (2008)
reveal some of the common quality enhancement characteristics taken from replies from
diverse higher education institutions. These include institutions having the
responsibility for the quality of the learning process; the existence of a flexible and
negotiated evaluation model, non-mandatory and shaped by the participants in the
teaching/learning process; and external vigilance of HEIs relying on institutional audits.
These late developments in quality assurance in European higher education, and the
consequent emphasis that is being put on the need for HEIs to build their own
mechanisms to assure and improve teaching and learning quality, lead us to think that
maybe this is the time to look again at quality management principles, tools and
frameworks and see if they can be of some help to the development of these quality
assurance or management systems.
4. Quality management frameworks: Revisiting the debate on their
applicability
Harvey (1995) once mentioned that there was time to go beyond TQM and that rather than
debate suitability it is time to look to practice and determine the worthwhile aspects of
TQM and relocate them in the higher education context (Harvey, 1995: 123). Also Joseph
Juran, one of the leading quality management gurus, has observed that the prime need is to
discover the realities under the labels, i.e. the deeds, activities, or things which the other
person is talking about (Juran and Gryna, 1988: 2, 13, cited in Houston, 2008).
Besides gurus ideas on what quality management is and how it should be implemented,
managed and improved, there are several methodologies to measure and guide quality
assessment and improvement in organisations. Within these the ISO 9000 standards, the
Quality Assurance and Management
136
Balanced Scorecard and the EFQM Excellence Model deserve to be noticed due to their
international recognition and previous validation. Discussing the possibilities of using
them and/or their logics within higher education institutions to frame quality
assurance/management systems is made in this section of the paper, taking into
consideration what the ESG establishes as standards for internal quality assurance.
Furthermore one will try to go a step further by showing that these quality
management models, while encompassing the ESG, are in fact broader than the
standards, allowing, if adequately applied, for a truly quality enhancement approach
within higher education institutions and not just a quality assurance one as, in our
opinion, is the case with the application of just the ESG.
As previously referred there is a long debate about quality in higher education. This
debate has repeatedly shown the difficulty in reaching a consensus not only about what
quality is, but also about its implications for higher education. Sarrico et al. (2010) consider
that quality can have multiple meanings in higher education and that this variety has had
important consequences in the development of methods and instruments of assessing
quality. According to the authors,
one of the most important issues refers to the multidimensionality of higher
education institutions, which perform multiple and very different missions. Thus,
higher education institutions face multiple stakeholders that have different
expectations and different priorities regarding higher education. These differences will
necessarily reflect in their specific approach to the evaluation of higher education,
which should reflect the multiplicity of interests and aspirations that converge into
each higher education institutions. The development of several models of institutional
evaluation has often been an attempt to reflect those differences and nuances into an
integrated evaluative framework (Sarrico et al., 2010:51).
Furthermore Sarrico et al. (2010: 52) claim that
there are already some examples in the literature that account for the application of
institutional quality assessment models that provide this integrated view on higher
education quality, providing frameworks for better institutional management ()
leading to continuous quality improvement. These are the cases of the EFQM
Excellence Model, the Balanced Scorecard, Benchmarking exercises or the EUA
Institutional Evaluation Programme. All these models propose to assess higher
education institutions as a whole, including not only its teaching and research
missions, but also other activities and, notably, institutional management.
The ESG (ENQA, 2007: 16-19) establishes seven standards for quality assurance within
HEIs, complemented with guidelines for their implementation:
1. Policy and procedures for quality assurance
Institutions should have a policy and associated procedures for the assurance of the quality and
standards of their programmes and awards. They should also commit themselves explicitly to the
development of a culture which recognises the importance of quality, and quality assurance, in
their work. To achieve this, institutions should develop and implement a strategy for the
continuous enhancement of quality. The strategy, policy and procedures should have a formal
status and be publicly available. They should also include a role for students and other
stakeholders.
Implementing Quality Management Systems in Higher Education Institutions
137
2. Approval, monitoring and periodic review of programmes and awards
Institutions should have formal mechanisms for the approval, periodic review and monitoring of
their programmes and awards.
3. Assessment of students
Students should be assessed using published criteria, regulations and procedures which are
applied consistently.
4. Quality assurance of teaching staff
Institutions should have ways of satisfying themselves that staff involved with the teaching of
students are qualified and competent to do so. They should be available to those undertaking
external reviews, and commented upon in reports.
5. Learning resources and student support
Institutions should ensure that the resources available for the support of student learning are
adequate and appropriate for each programme offered.
6. Information systems
Institutions should ensure that they collect, analyse and use relevant information for the
effective management of their programmes of study and other activities.
7. Public information
Institutions should regularly publish up to date, impartial and objective information, both
quantitative and qualitative, about the programmes and awards they are offering.
Can these standards be implemented resorting to the quality management frameworks
proposed in the quality management literature? Would it be wise to do so?
The Balanced Scorecard
The Balanced Scorecard (BSC) was developed by Kaplan & Norton (1992) and aims at
attaining a balance between several dimensions of performance (see Figure 2). These
include the following ones: financial, internal business processes, customer and the needs
of learning and growth. The critical point is that in order for the organisation to be
successful it needs to understand the interactions between actions (operational and
developmental) and results (external indicators and financial ones). This apparently
simple idea has had a tremendous impact in recent years in encouraging managers, at
various levels, to develop balanced indicators of performance. Furthermore, this tool has
produced other important changes by exposing managers to both indicators of
determinants and results. The development of the BSC attempts to understand the
interaction between both, helping organisations to develop a performance measurement
mechanism that links strategy and operations.
Those organisations that are capable of reflecting their strategy in their systems of
performance measurement seem to be better equipped to implement the former. By using
knowledge on the interactions between indicators on operations, funding, external
(customers), and development (learning and growth), organisations can become smarter.
Those more able at exploring those interactions are likely to perform better. This analysis
Quality Assurance and Management
138
is not trivial since the interactions between operational decisions and organisational
performance can be extremely complex.
Fig. 2. Balanced Scorecard (adapted from Kaplan and Norton, 1992)
Several studies reported in the literature demonstrate the application of the BSC to the
educational context (see, for example, Asan and Tanyas, 2007; ONeill et al., 1999; Cullen
et al., 2003; Karathanos and Karathanos, 2005), on the basis that educational institutions
also need to be managed through strategic concepts, in order to meet demands and keep
up with change (Asan and Tanyas, 2007: 1006). Furthermore, if one looks at the ESG Part1
one can see that standards could be met through a proper definition of the different
performance indicators included in the BSC. Starting with Policy and procedures for quality
assurance which should be part of the Vision and Strategy at the core of the model.
Approval, monitoring and periodic review of programmes and awards; Assessment of students;
Quality assurance of teaching staff and Learning resources and teaching staff could be met
when defining the Internal Business Processes indicators; Public information would go
well under the Customer indicators and Information systems resorting to Learning and
Growth. Moreover the philosophy behind the BSC, of linking actions and results, helps to
make sense of the links between the seven standards put forward in the ESG and that
otherwise may be looked at as independent ones, adding a developmental character to a
quality assurance system that otherwise would look as mainly operational. Interestingly
nothing is said on financial sustainability in the ESG, something which is already addressed
in some national systems of quality assurance.
The EFQM Excellence Model
Another model that attempts to improve the capacity of organisations to incorporate the
interactions between actions and results in their decision-making process is the EFQM
Excellence Model, a creation of the European Foundation for Quality Management (EFQM).
Implementing Quality Management Systems in Higher Education Institutions
139
According to Campatelli et al. (2011: 693) the EFQM promotes the use of a standard
management model () capable of bringing the organisation to excellence level and a
standard evaluation process that could be applied to all types of organisations, regardless
of sector, size, structure or maturity.
The EFQM model attempts to analyse how satisfaction can lead to excellence in
organisational results. It was devised as a non-prescriptive framework, which recognises
that excellence may be sustainably achieved through the adoption of different approaches
(Calvo-Mora et al., 2005). The model states that satisfaction of customers and employees,
and societal impact are achieved through leadership, which facilitates and stimulates
institutional strategies and the management of personnel, resources and processes (see
Figure 3). The institutions capacity to deal successfully with those aspects will depend
ultimately on their organisational excellence. The model states that the learning processes
within the institution will help it to improve its performance and further development.
The proponents of this model consider that first-rate organisations have a better
institutional performance due to better management practices, i.e., better management of
processes, skills, people (either employees or customers) and structure. On the other
hand, this behaviour impinges on a clear vision, a service-oriented concept, well
articulated strategies and an adequate culture stimulated by effective leadership. First-rate
organisations go beyond intuition and not only understand the links between operational
decisions and organisational development, but also use that understanding effectively.
Fig. 3. The EFQM Excellence Model (adapted from EFQM, 2010)
According to Rosa and Amaral (2007), since the EFQM Excellence Model is associated
with business, it has been resisted by academics and did not receive broad-based support
inside HEIs. But the authors also alert to the fact that the growing concern with quality,
the need to be accountable towards society and the increasing presence of the market
in higher education systems have made quality assessment, management, assurance and
improvement an unquestionable reality, covering teaching, research, services and
institutional-level approaches. (Rosa and Amaral, 2007: 194). So it is not that surprising
Enablers Results
Learning, Creativity and Inovation
Quality Assurance and Management
140
that some higher education systems and institutions have started to consider its
application, as has been reported in the literature (Saraiva, Rosa and Orey, 2003; Farrar
2000; Osseo-Asare Jr. and Longbottom, 2002; Hides and Davies, 2002; McAdam and Welsh,
2000; Cortadellas, 2000; Schmidt and Garca-Legaz, 2003; Calvo-Mora, Leal and Roldn,
2005, Rosa and Amaral, 2007; Campatelli, Citti and Meneghin,2011), since it provides a
unique framework for the global evaluation of an organisation and strongly promotes the
implementation of a continuous improvement system. (Campatelli et al., 2011: 693).
Looking at the model criteria it is relatively easy to see that they cover the standards for
quality assurance predicted under the ESG (2005): Policy and procedures for quality
assurance is addressed under the Leadership and Strategy criteria; Approval, monitoring and
periodic review of programmes and awards and Assessment of students under the Processes,
Products and Services criterion; Quality assurance of teaching staff under the People
criterion; Learning resources and student support is covered by the Resources and
Partnerships criterion; and finally both the Information systems and the Public information
standards may be addressed through the different enablers and results criteria, depending
on institutions local circumstances as referred in the ESG (ENQA, 2007). Furthermore, the
arrow in the model, representing its feedback philosophy, also contributes to the
implementation of the Information systems standard, since this one has to do with
institutional self-knowledge, being the starting point for effective quality assurance
(ENQA, 2007). Additionally, as was the case with the BSC, the EFQM model allows to
uncover the links between the seven standards, since it is also based on the idea that
quality actions (enablers) lead to quality results.
The ISO 9001: 2008 Standard
Another possible quality management framework that HEIs may be willing to consider
is the ISO 9001:2008 standard, which is probably the most well known of the referred
frameworks. This standard sets the requirements for implementing a quality
management system in an organisation, independently of its dimension or type of activity,
including education institutions.
According to the ISO (2005), a quality management system is the management system
that directs and controls an organisation with respect to quality. The ISO 9001:2008 standard
establishes the minimum requirements to set up such a system, which are organised in five
main blocks: Quality Management System; Management Responsibility; Resource Management;
Product Realization; and Measurement, Analysis and Improvement (see Figure 4).
According to the ISO 9000:2000 developing and implementing a quality management
system comprehends several phases, among which:
determining the needs and expectations of customers and other interested parties;
establishing a policy for quality and the organisation quality goals;
defining the processes and responsibilities needed to attain the quality goals defined;
determining and making available the resources needed to attain the quality goals
defined;
establishing the methods to measure each process efficiency and efficacy;
applying these measures to determine each process efficiency and efficacy;
identifying the means to prevent non-conformities and eliminate its causes;
Implementing Quality Management Systems in Higher Education Institutions
141
establishing and applying a process to the continuous improvement of the
organisations quality management system.
Fig. 4. The ISO 9001:2008 standard model (adapted from ISO, 2008).
A lot of criticism has emerged around the application of this standard to higher
education institutions, namely because the ISO approach entails too general a view of
the production process of higher education (Csizmadia, 2006, cited in Pratasavitskaya
and Stensaker, 2010:39), implying a high degree of processes standardisation that is
incompatible with HEIs nature (Rosa, 2003). It is true that there are not many references
in the literature to the ISO 9001 implementation in higher education institutions;
nevertheless Rosa (2003) argues that this standard can in fact be applied if the HEI so
wishes and believes that implementing a quality management system according to it will
allow embarking in a continuous improvement process (that does not end with the
standard implementation, although the implementation can constitute a good departure
point). And the truth is that some HEIs have indeed decided to implement such quality
management systems (Sohail et al., 2006; Welsh and Dey, 2002), obtaining benefits such
as a cost effective method for accountability, the development of an improvement-driven
focus through re-focusing core processes to improve both productivity and service
levels, to take into account a broader number of stakeholder views, to enhance the use of
data for quality assurance purposes and improvement in inter-departmental working
conditions and student enrolment (Brookes and Becket, 2007). Nevertheless the truth is
that the application of the ISO 9001 in higher education has been generically limited to
the institutions services and not to their core functions, namely teaching and learning.
Looking at the ISO 9001 requirements shows their implementation will answer to the
ESG. Addressing Management Responsibility will lead to the implementation of a Policy and
procedures for quality assurance, while the Approval, monitoring and periodic review of programmes
and awards and the Assessment of students are covered under the Realisation of the
Quality Assurance and Management
142
Product. When implementing the Resource Management requirements, the Quality assurance
of teaching staff and the Learning resources and student support standards are addressed.
Finally the requirements put under Measurement, Analysis and Improvement allow for
the implementation of the Information systems and Public information standards. Again the
idea underlying the ISO 9001 standard that there is the need to continuously improve
an organisation quality management system, based on the application of the PDCA (Plan-
Do-Check-Act) cycle, contributes to establish a link between the seven standards
established in the ESG, allowing for the implementation in the HEIs of a quality
assurance system with a truly developmental character.
From the analysis just presented it seems than that the ESG may be applied in European
HEIs if these decide to opt for the implementation of a quality management system based
on one of the most well known quality management frameworks. Additionally, when doing
so institutions are establishing interrelationships among the standards, allowing them to
really take into consideration the need for feebdback processes that will lead to higher
education institutions and their functions, namely teaching and research, continuous
improvement. In a sense if HEIs will go for the implementation of the ESG tout court they
risk being implementing a rather operational quality assurance approach, while if they
opt for their implementation via the adoption of a quality management model there is
the possibility that quality assurance will become more developmental, hopefully leading
to true quality enhancement.
5. Conclusions
In 2007 Brookes and Becket (2007) made a review of the literature on quality management
in higher education and came to the conclusion that a number of environmental
forces were driving change within and across countries, leading to a firm emergence of the
quality management issue on the agenda of many higher education institutions. The
review revealed that the most popular response HEIs gave was the testing or
implementation of quality management models developed by industry. From the empirical
studies reported in the literature and analysed by the authors, benefits related to the
implementation of these models as well as limitations were identified. The benefits
included the adoption of a strategic approach to quality measurement and management and
the identification of quality enhancement priorities; limitations related largely to the
dilemma of applying business models to higher education. Furthermore the authors refer
that the models are reported to have far greater applicability in measuring
administrative or service functions within HEIs rather than the quality of research or
teaching and learning (Brookes and Becket, 2007: 105-106).
This paper argues that at least in Europe the need for higher education institutions to
develop their own internal quality management systems has become a reality, for
which European standards and guidelines have even been defined. So maybe it is again
the time to look at existent quality management models, going beyond the debates about
whether quality management is or is not suited for higher education, focusing less on the
label and paying more attention to the content and substance of such models (Harvey,
1995; Pratasavitskaya and Stensaker, 2010). Because it may just be as Birnbaum (2000: 104)
points out: TQM was sound; it was the implementation that was at fault. Furthermore the
Implementing Quality Management Systems in Higher Education Institutions
143
discussion presented in this paper leads us to conclude that quality management models
not only have full potential to cover the standards and guidelines established by ENQA
in 2005 to higher education, but additionally they may allow HEIs to go a step further,
opening the possibility for them to really move towards quality enhancement. It is just a
matter of adequately implementing them, so that they cover what lies at the heart of higher
education: teaching and learning.
Interestingly, and certainly worth further research, is the fact that the adoption of the ESG by
the European HEIs may finally allow for benchmarking exercises, which so far have been
difficult to implement due to the rather different nature of quality assurance practices
existent in HEIs all over Europe. Benchmarking is a process that can be used to improve
higher education institutions practices and performance (see Jackson & Lund, 2000). It
is a self-evaluation method that allows a better knowledge and measurement of the
organizations performance in order to promote continuous improvement. Benchmarking
has been used in higher education especially in supporting areas such as administrative,
technical and management activities. The effective management of those activities
becomes critical for higher education institutions performance, especially since the latter
face an increasingly complex context of tight financial resources and rapidly changing
environment. Benchmarking not only allows for the comparison of indicators, which makes
possible the review of proposed goals, but also allows for the sharing of best practices
within functional communities, identifying more intelligent ways of performing the same
tasks and new solutions for common problems.
6. References
Amaral, A., & Rosa, M. J. (2010). Recent Trends in Quality Assurance. Quality in Higher
Education, 16(1), 59-61.
Asan, S. S., & Tanyas, M. (2007). Integrating Hoshin Kanri and the Balanced Scorecard
for Strategic Management: The case of higher education. Total Quality
Management and Business Excellence, 18(9), 999-1014.
Birnbaum, R. (2000). Management fads in higher education. Where they come from, what they do,
why they fail. San Francisco: Jossey-Bass Inc.
Birnbaum, R., & Deshotels, J. (1999). Has the academy adopted TQM? Planning for
Higher Education, 28, 29-37.
Brookes, M., & Becket, N. (2007). Quality management in higher education: a review
of international issues and practice. International Journal of Quality Standards, 1(1),
85-121.
Calvo-Mora, A., Leal, A., & Roldn, J. L. (2007). Relationships between the EFQM
model criteria: a study in Spanish universities. Total Quality Management and
Business Excellence, 16(6), 741-770.
Campatelli, G., Citti, P., & Meneghin, A. (2011). Development of a simplified approach
based on the EFQM model and Six Sigma for the implementation of TQM
principles in a university administration. Total Quality Management and Business
Excellence, 22(7),691-704.
Quality Assurance and Management
144
Cortadellas, J. (2000). Aplicao do modelo EFQM no ensino Universidade Politcnica da
Catalunha. Paper presented at the Sistemas de Avaliao da Qualidade no Ensino
Superior.
Cruickshank, M. (2003). Total quality management in the higher education sector: a
literature review from an international and Australian perspective. Total Quality
Management and Business Excellence, 14(10), 1159-1167.
Cullen, J., Hassal, T., & Broadbent, M. (2003). Quality in higher education: from monitoring
to management. Quality Assurance in Education, 11(1), 5-14.
Dill, D. (1995). Through Deming's eyes: a cross-national analysis of quality assurance
policies in higher education. Quality in Higher Education, 1, 95-110.
EFQM. (2010). EFQM Excellence Model. Brussels: EFQM.
ENQA. (2007). Standards and Guidelines for Quality Assurance in the European Higher Education
Area. Helsinki: ENQA - European Association for Quality Assurance in Higher
Education.
Farrar, M. (2000). Structuring Success: A Case Study in the Use of the EFQM
Excellence Model in School Improvement. Total quality management, 11(4/6), 691-
696.
Filippakou, O., & Tapper, T. (2011). Quality Assurance and Quality Enhancement in
Higher Education: Contested Territories? . Higher Education Quarterly, 62(1/2), 84-
100.
Harvey, L. (1995). Beyond TQM. Quality in Higher Education, 1, 123-146.
HEA. (2008). Quality enhancement and assurance: a changing picture? York: Higher Education
Academy.
Hides, M., & Davies, J. (2002). Implementation of the EFQM Excellence Model in the UK
Higher Education Sector. A Comparison With Other Sectors. Paper presented at the 7th
World Congress for Total Quality Management Business Excellence, Make it
Happen!
Houston, D. (2008). Rethinking quality and improvement in higher education. Quality
Assurance in Education, 16(1), 61-79.
ISO. (2005). Quality management systems - Fundamentals and vocabulary: Geneve:
International Organisation for Standardisation.
ISO. (2008). Quality Management Systems - Requirements: International Organisation for
Standardisation.
Jackson, N. & Lund, H. (2000). Benchmarking for higher education. Buckingham: Open
University Press.
Kaplan, R. S., & Norton, D. P. (1992). The balanced scorecard measures that drive
performance. Harvard Business Review, Jan-Feb, 71-79.
Karathanos, D., & Karathanos, P. (2005). Applying the Balanced Scorecard to Education.
Journal of Education for Business, 80(4), 222-230.
Kells, H. (1995). Creating a culture of evaluation and self-regulation in higher education
organisations. Total quality management, 6(5/6), 457-467.
Liaison Committee of Rectors Conferences (1993). Quality Assessment in European Higher
Education. A Report on Methods and Mechanisms, and Policy Recommendations to the
European Community. Brussels: Liaison Committee of Rectors Conferences.
Implementing Quality Management Systems in Higher Education Institutions
145
Massy, W. F. (2003). Honoring the trust. Quality and cost containment in higher education.
Bolton: Anker Publishing.
McAdam, R., & Welsh, W. (2000). A Critical Review of the Business Excellence
Quality Model Applied to Further Education Colleges. Quality Assurance in
Education, 8(3), 120-130.
O'Neil, H. F. J., Bensimon, E., Diamond, M., & Moore, M. (1999). Designing and
implementing an academic scorecard. Change, 31(6), 32-40.
Osseo-Asare Jr, A. E., & Longbottom, D. (2002). The need for education and training in the
use of the EFQM model for quality management in UK higher education
institutions. Quality Assurance in Education, 10(1), 26-36.
Pratasavitskaya, H., & Stensaker, B. (2010). Quality management in higher education:
towards a better understanding of an emerging field. Quality in Higher Education,
16(1), 37-50.
Redmond, R., Curtis, E., Noone, T., & Keenan, P. (2008). Quality in higher education.
The contribution of Edward Deming's principles. International Journal of Educational
Management, 22(5), 432-441.
Rosa, M. J. (2003). Definio de Bases Estratgicas e de Excelncia para o Desenvolvimento do
Ensino Superior em Portugal. Universidade de Aveiro, Aveiro.
Rosa, M. J., & Amaral, A. (2007). A self-assessment of higher education institutions from
the perspective of the EFQM excellence model. In D. F. Westerheijden, B. Stensaker
& M. J. Rosa (Eds.), Quality assurance in higher education: trends in regulation,
translation and transformation (Vol. 20, pp. 181-207). Dordrecht: Springer.
Sahney, S., Banwet, D. K., & Karunes, S. (2004). Conceptualizing total quality management
in higher education. The TQM Magazine, 16(2), 145-159.
Sakthivel, P. B., & Raju, R. (2006). Conceptualizing total quality management in
engineering education and developing a TQM educational excellence model. Total
Quality Management and Business Excellence, 17(7), 913-934.
Santos, S. M. d. (2011). Anlise comparativa dos processos europeus para avaliao e acreditao de
sistemas internos de garantia de qualidade. Lisboa: A3ES - Readings.
Saraiva, P., Rosa, M. J., & Orey, J. (2003). A Large-scale Application in Portuguese Schools
of the EFQM Excellence Model. Quality Progress, 36(11), 46-51.
Sarrico, C. S., Rosa, M. J., Teixeira, P. N., & Cardoso, M. F. (2010). Assessing quality and
evaluating performance in higher education: worlds apart or complementary
views? Minerva, 48, 35-54.
Schmidt, A., & Garca-Legaz, F. (2003). Anlisis del poder predictivo del modelo EFQM para la
gestin y mejora de la calidad en la universidad pblica espaola. Paper presented at the
XIII Jornadas Hispano-Lusas de Gestin Cientfica - La empresa familiar en un
mundo globalizado.
Schwarz, S., & Westerheijden, D. (2004). Accreditation and Evaluation in the European Higher
Education Area. Dordrecht: Kluwer Academic Press.
Sohail, M., Daud, S., & Rajadurai, J. (2006). Restructuring a higher education institution: a
case from a developing country. International Journal of Educational Management,
20(4),279-290.
Quality Assurance and Management
146
Trow, M. (1996). Trust, markets and accountability in higher education: a comparative
perspective. Higher Education Policy 9(4), 309-324.
Welsh, J., & Dey, S. (2002). Quality measurement and quality assurance in higher
education. Quality Assurance in Education, 10(1), 17-25.
Williams, G. (1993). Total quality management in higher education: panacea or placebo?
Higher Education, 25(3), 229-237.
8
Using a Class Questionnaire for Quality
Improvement of Engineering Ethics
Instruction During Higher Education
Yuji Okita
Kanazawa Institute of Technology
Japan
1. Introduction
This report explains quality improvement of higher education engineering ethics classes. As
the sophistication of modern technology increases, its positive and negative influences on
society also expand, and the importance of engineering ethics comes to be considered
intensively. Therefore, the importance of engineering ethics as a class topic during higher
education increases, because the achievements of the numerous graduated students who
find positions in the professional engineering field will unquestionably affect the quality of
life we enjoy in our modern society.
Because only a few decades have passed since engineering ethics education has come to be
regarded as important, its pedagogy has not been well established. The accumulation of
good teaching materials and good methods remains insufficient. Regarding today's
situation, it can be said that the lecturer in charge is devoting great effort to the
improvement of instruction, but mostly through application of trial-and-error methods
individually and independently. Consequently, the educational quality of engineering ethics
classes is unstable, with great variation. Evaluation and improved quality are desirable.
The author, believing that a questionnaire survey administered to students can be useful to
evaluate and improve the engineering ethics class quality, found several lecturers with
similar views. Therefore, this joint execution of the questionnaire survey was realized. This
paper reports details of the idea, execution, and results of the survey.
2. Current state
What are the current conditions related to evaluation, accreditation of higher education, and
engineering ethics education? What are the current conditions of the use of questionnaire
surveys in engineering ethics education? These topics are overviewed in this chapter.
2.1 Current conditions of educational evaluation and accreditation
Evaluation of educational outcomes has persisted as a challenging issue for years. In the
primary and secondary education field, pedagogic research on educational effects has been
Quality Assurance and Management
148
performed for a long time, probably because those levels of instruction have constituted
nationally compulsory education.
The Organization of Economic Cooperation and Development (OECD) Programme for
International Student Assessment (PISA) has supplied much data and information. The
PISA Web site
1
reports that through its surveys of 15-year-olds in the principal
industrialised countries. Every three years, it assesses how far students near the end of
compulsory education have acquired some of the knowledge and skills essential for full
participation in society.
Then how about higher education? Track records of credit unit authorization of class
subjects exist, as do those of academic degree authorization. Nevertheless, little information
has been supplied from the higher education side to society at large. Consequently, societal
confidence in higher education has been shaken.
Under such circumstances, ABET
2
, the American accreditation organization for college and
university programs, has recently devoted great effort in reforming their accreditation
criteria and their reviewing performance, where the outcomes-based assessment is regarded
as highly important. The ethical requirement is included in their criteria: their Engineering
Accreditation Commissions Criterion 3 (f) says Engineering programs must demonstrate
that their students attain the outcomes of an understanding of professional and ethical
responsibility. In Japan, the Japanese Accreditation Board of Engineering Education
(JABEE), influenced by ABET and other overseas boards, is striving similarly toward its
goals.
The various activities of OECD and UNESCO are also noteworthy. Their key programs and
principles would be, for example, quality assurance (quality provision), cross-border higher
education, Assessment of Higher Education on Learning Outcomes (AHELO), and the
Programme for the International Assessment of Adult Competencies (PIAAC).
It might be readily apparent that quality assurance and improvement of higher education
are regarded world-wide as more important than ever, and that academic staff should
positively seek adaptive solutions for these issues.
2.2 Current conditions of engineering ethics education
Next, the present conditions of engineering ethics education in higher education are
considered.
A fundamental question is whether the degree of achievement and evaluation adapt
themselves to morality or ethics. In other words, can ethics be taught? Still, higher
education institutions which provide class subjects to students hold some responsibility to
give them high-quality educational opportunities and reliable credit units as well as
degrees. Improving their educational quality is a serious issue.
At the Kanazawa Institute of Technology, a research project titled "The Formation of Ethics
Crossroads and the Construction of Science and Engineering Ethics" was promoted during
1
http://www.pisa.oecd.org/
2
http://www.abet.org/
Using a Class Questionnaire for
Quality Improvement of Engineering Ethics Instruction During Higher Education
149
20042007 under funding support of the Japan Science and Technology Agency (Fudano,
2007). How to grasp engineering ethics education effect was a main issue to be tackled.
Further consideration of the trial effort to measure the educational effect at engineering
ethics was also reported (Honda et al., 2009). A result of the survey that was performed by
the Engineering Ethics Investigating Committee of the Japanese Society for Engineering
Education was also reported (Kobayashi et al., 2010). The report, described the problem that
common understandings related to contents, educational techniques, and assessment
methods remain unclear, despite the spread of engineering ethics education during the last
decade in Japan.
2.3 Current conditions of questionnaire survey of ethics class
Does a questionnaire survey help to clarify and improve engineering ethics class?
The author, together with other researchers, holds experience in applying questionnaire
surveys in research related to corporate ethics. The surveys were administered as a part of
"The Formation of Ethics Crossroads and the Construction of Science and Engineering
Ethics" described above. The results and continuing research reveal that the questionnaire
survey is useful to ascertain the business ethics condition of an enterprise. In other words, it
is effective to know what is strong and weak about an enterprises behaviour judged from
an ethical perspective. It offers several leads in improving the effort of business ethics (Okita
et al., 2010).
Kageyama and others, including the author, reported a questionnaire survey application
result to an engineering ethics class of The University of Tokushima (Kageyama et al., 2009).
The questionnaire survey is useful for engineering ethics classes offered at institutes of
higher education.
The author has conducted several engineering ethics classes at universities, teaching
freshmen to master course students. Questionnaire surveys have been used; they have
invariably helped the author to improve class lessons. It follows naturally that if the survey
questionnaires were administered by several lecturers to various classes and the results
were shared, then the quality of engineering ethics education could be improved more
effectively.
3. Assessment of classes by the joint implementation of questionnaire
survey
The author and other members performed earlier research of engineering ethics class by the
joint implementation of a commonly prepared questionnaire survey (Okita et al., 2010;
Shimizu et al., 2010). The Education Working Group of the Ethics Committee of the Institute
of Electrical Engineers of Japan (IEEJ) worked well as a basis for activity. The basic views
and concrete examples are described in this chapter.
3.1 Basic views
Basic views of the applied questionnaire survey are the following. The surveys were
administered to the class students twice: at the beginning and ending of the course. The
contents of the two questionnaires are fundamentally identical, so that results can be
Quality Assurance and Management
150
compared. Data obtained at the beginning period show the initial conditions of the class.
Therefore, they help a lecturer to prepare later lessons. The difference between ending and
beginning data are expected to show the change of students attributable to learning in the
class. Comparison of the data obtained from two or more classes would provide more
fruitful information for the improvement of engineering ethics education.
Presume four sets of questionnaire survey data as presented in Table 1.
Questionnaire Survey Period
Beginning Ending
Class X Data Xb Data Xe
Class Y Data Yb Data Ye
Table 1. Questionnaire Survey Data.
The variance of Xe and Xb, as with that of Ye and Yb, shows the change of students. It
results from the lecturer. Therefore, the student can find hints of which part of the students
own lessons causes, or does not cause, the change if the contents of questionnaire are
properly set.
In cases where classes X and Y are covered by the same lecturer, say classes of last year and
this year, then the lecturer can know the effects of efforts at improvement under the
conditions where groups of students of the two succeeding years are similar. In case classes
X and Y are covered by different lecturers, they would be able to improve their teaching
methods not only by sharing data, but also by sharing their syllabi, teaching methods, and
related information.
3.2 Examples of concrete topics
Questionnaire items of two types are presented as examples in this clause. First is the issue
of whether students have knowledge related to topics of engineering ethics. Second is the
ability to do something related to those ethical issues.
3.2.1 Knowledge acquisition
We consider two ethics-related question items of questionnaires related to the knowledge of
students. These are:
Do you agree or do you disagree with the following sentences?
i. I know the meaning of compliance.
ii. I know the meaning of CSR.
Students are asked to answer whether they agree to the given sentences, where so called
Likert 7-point scale is adopted.
Both compliance and Corporate Social Responsibility (CSR) are presumed to be important in
society, especially in enterprises. Compliance is old and passive, but it is still important.
However, CSR is new and positive: a corporation should positively perform not only their
Using a Class Questionnaire for
Quality Improvement of Engineering Ethics Instruction During Higher Education
151
business matters to acquire profit but also seek to improve human rights, the natural
environment, and other matters related to sustainability
3
.
Those who live in a modern society, especially who work in a social organization as
engineers in professional field, should know these principles well. Nevertheless, university
students, at least in Japan, generally have insufficient knowledge about them. By presenting
a Likert scale of 17 representing seven choices, strongly disagree, disagree, weakly
disagree, neither agree nor disagree, weakly agree, agree, strongly agree, the obtained data
of the questionnaire can be converted in quantitative figures, so that they can be handled
mathematically to obtain the mean of the class, standard deviation (SD), and so on. These
might be useful to inspect the following hypothetical thinking.
a. Probably the mean point mark at the time when class starts will be very low, and
standard deviation will be small, because students do not, in general, know the word
compliance. (Same as CSR)
b. The mean score at the end of a class will become high because students will learn in
cases where compliance is taken up by a lesson. (Same as CSR)
c. In a class where students study seriously, the final grade will become higher (the
difference from beginning to end of the class will become larger).
d. To teach better will raise the end point mark higher and make the change larger.
e. Some class students are only lightly involved. They might take naps during lessons, or
run from or otherwise avoid the lesson. The effect is to widen the standard deviation of
the final course grades.
f. A widened standard deviation might also result from poor teaching of the instructor,
not by students.
g. The difference of the scores of compliance and CSR suggest a difference of efforts on
these two issues currently made by the companies in society.
These hypotheses might sometimes be verified by a single instructor alone, but the
cooperative work of plural instructors makes the verification analysis much easier and more
effective.
3.2.2 Acquisition of communications skills
Upon graduation, many students want to hold positions in business organizations. Then,
regarded from the company side, on what points do they put importance at the
employment of freshmen? Keidanren (Japan Business Federation)
4
has conducted annual
questionnaire surveys related to employment activities of member companies since 2001.
According to it, communications skills are invariably the most important item. The
member companies choose five important items from the 25 list of items in the
questionnaire survey. In 2010, 81.6% of the respondent companies raised communication
skills, the highest of 25 items.
3
The International Standard Organization (ISO) published a new standard ISO 26000 (Guidance on
Social Responsibility) in November 2010, which is based on the idea that not only corporations but also
social organizations of every type hold social responsibility. CSR is widened to SR.
4
http://www.keidanren.or.jp/english/
Quality Assurance and Management
152
Then, what communication skills does the industrial world expect of university graduates
and engineering education? Is it the entertainers ability to elicit laughter of the audience,
or the ability to take orders of guests without mistake at a restaurant? A company ought
to ask engineering graduates to have engineering communication skills, which include
smooth communication at a team meeting, business-related talk, academic conference
presentations, and so on, which are based on common sense and a general understanding
of the society in which their work will create values of some kind for the company and
society.
Following items are, for example, considered to be useful in the questionnaire to know the
interest and attitude of a student.
Do you agree or do you disagree with the following sentences?
i. Social, cultural, political, and economic forces will continue to shape and affect the
success of technological innovation
5
.
i. My area of study has a nerdy image.
ii. My area of study is difficult for the general public to understand because it is very
complex and sophisticated.
It is doubtful that our society can have the benefits of the sound and solid technologies,
unless those who do studies and engineering create new products and services with little
consideration of the society they live in. The engineering ethics class must revive and
encourage engineering students to adopt a wide interest in various fields such as culture,
economy, humanities, law, politics, other engineering disciplines, and the relation between
technology and society.
4. Practiced questionnaire survey
In this chapter, actually practiced questionnaire surveys are discussed from the viewpoints
of design, execution, and results.
4.1 Design of questionnaire
Based upon the considerations described in the previous chapter, a questionnaire for joint
work was designed.
4.1.1 Structure
The questionnaire sheet structure is presented in Fig. 1. A notice to respondents is placed at
the beginning, followed by sections soliciting the respondents attributes and question
responses. Question items are classified into three parts: the first is common and mandatory
for users who apply this questionnaire; the second is common and optional; the third is
arbitrary and optional, where users of this questionnaire can place arbitrary question items
as they like.
5
This sentence is taken from the description of The Engineer of 2020 , p.53, published by the National
Academy of Engineering, 2004
Using a Class Questionnaire for
Quality Improvement of Engineering Ethics Instruction During Higher Education
153
Notice to respondent
Attributes of respondent
Question items
Part one: mandatory and common questions
Part two: optional and common questions
Part three: optional and arbitrary questions
Fig. 1. Structure of questionnaire sheet.
4.1.2 Question items
A notice to respondents includes the following items.
Purpose of this questionnaire survey
This is an unsigned survey
Request to answer instinctively
Privacy policy
Attributes of the respondent are requested: the name of the institution, name of department,
class name, grade year, age, past experience in study engineering ethics in higher education,
etc.
Part one of the questions includes 32 items, some of which were explained in Section 3.2.
Respondents were asked to choose one of seven alternative answers for each sentence,
arranged as "strongly disagree" to "strongly agree". The complete list of the question items is
shown below. Arrangement of the items is randomized with small exceptions.
- Q1) My major field of engineering is inconspicuous.
- Q2) I hold a strong sense of ethics (compared to an average person).
- Q3) I know the meaning of CSR.
- Q4) Engineering ethics is important.
- Q5) Engineering ethics is gloomy.
- Q6) I have experience of feeling familiar with engineering ethics.
- Q7) Social, cultural, political, and economic forces will continue to shape and affect the
success of technological innovation
6
.
- Q8) I know the meaning of compliance.
6
This sentence was taken from The Engineer of 2020.
Quality Assurance and Management
154
- Q9) In all cases, the freedom of scientific research should be guaranteed.
- Q10) To save someones life, telling a lie is allowable.
- Q11) If an action troubles nobody, then I can continue doing it.
- Q12) My major field of study has a nerdy image.
- Q13) The image of the word "ethics" is formal.
- Q14) My study speciality is difficult for the general public to understand because it is
very complex and sophisticated.
- Q15) The pace of the technological innovation will continue to be rapid
7
.
- Q16) The possibility of destruction of future generations can occur if the generation of
today uses up natural resources such as oil and coal.
- Q17) I am reluctant to study anything by myself other than during class hours, if
possible.
- Q18) A bright touch exists in ethics.
- Q19) The presence of technology in our everyday lives will be seamless, transparent,
and more significant than ever
8
.
- Q20) I should interpret engineering ethics positively.
- Q21) I wish to devote study effort that is barely sufficient to receive a credit unit of a
class.
- Q22) To kill people is evil under any set of circumstances.
- Q23) Euthanasia should not be permitted in any case.
- Q24) Environmental destruction is unavoidable if it is necessary for the survival of
human beings because no natural life other than humans has a right to exist.
- Q25) The ethical consciousness of a professional and that of a general person should be
similar.
- Q26) The image of the word "ethics" is gloomy.
- Q27) I often read newspapers.
- Q28) I am interested in daily social affairs.
- Q29) I am interested in daily economical affairs..
- Q30) I am interested in daily political affairs.
- Q31) I am interested in daily international affairs.
- Q32) I am interested in daily sports affairs.
Part two of the question items are to ask whether they have received course credit unit of
humanity and social science classes.
Part three is optional and arbitrary. The questioned items might consist of, for example,
working experience, experience in joining academic activities other than that related to
formal coursework.
4.2 Joint practice
The attributes of the university which jointly conducted the questionnaire survey are
presented in Table 2.
7
Same as the footnote of Q7.
8
ibid
Using a Class Questionnaire for
Quality Improvement of Engineering Ethics Instruction During Higher Education
155
University Major
Grade
Year
Number of Students
Beginning Ending
A Electrical 4 100 97
B Electrical 3 23 18
C Electrical 4 68 N.A.
D Electrical 3 105 104
E Electrical 3 152 98
F Chemical/Electrical/Mechanical/System M1 16 17
G Chemical 4 62 64
H Chemical 2 76 77
I Nuclear M1 17 10
J Electrical 3 121 95
Table 2. Attributes of classes contributing the joint practice of the questionnaire survey.
4.3 Results
Data obtained from questionnaires are analyzed from three points of view: interest,
knowledge, and attitude. Probably, to be successful in academic life, it is important for a
student to be interested in it. Similarly, to study engineering ethics, it is important to have
some interest in it. The same view is applicable to knowledge and attitude. Obtaining
knowledge is important for students. Studying with a positive attitude is important as well.
Some representative results are presented in the following sections.
4.3.1 Interest
Question item Q4) of the Part One of the questionnaires is the following.
- Q4) Engineering ethics is important.
This item asks the respondent about the degree of interest in engineering ethics.
Figures 2 and 3 portray the results. Note that level 4.0 corresponds to the choice neither
agree nor disagree, the area higher corresponds to agree, and lower to disagree.
From these figures, we can infer that students generally show increased interest in
engineering ethics as a result of class learning. The only exception is Class I, where the
ending period data were not sufficiently obtained because of the time constraint of the
academic calendar: some students had to move to the next class before answering the
questionnaire. Furthermore, the questionnaire of the ending period was not conducted for
Class C: corresponding data were unavailable.
Although students showed increased interest in engineering ethics, the extent differs
considerably with classes, perhaps because of the contents of educational materials, handled
topics, and lecturing methods. Further analysis is expected.
Quality Assurance and Management
156
Fig. 2. Mean of replies to Q4: Engineering ethics is important.
Fig. 3. Difference between beginning and ending scores: mean and standard deviation (SD)
of replies to Q4.
Using a Class Questionnaire for
Quality Improvement of Engineering Ethics Instruction During Higher Education
157
4.3.2 Knowledge
Question items Q3) and Q8) of Part One of the questionnaire are as described below.
- Q3) I know the meaning of CSR.
- Q8) I know the meaning of compliance.
Implications of compliance and Corporate Social Responsibility (CSR) were reported in
Section 3.2.1. Data of the joint questionnaire survey are shown below.
Compared to the mean data of Q4 (Importance of engineering ethics), those of Q3 (CSR) and
Q8 (compliance) vary widely. This variation results from the difference of topics that
lecturers handled in their respective classes. Nevertheless, the mean difference data (Fig. 5)
illustrate that students of most classes have knowledge related to CSR and compliance
through the study of engineering ethics.
4.3.3 Attitude
Question items Q17) and Q21) of Part One of the questionnaire are as follows.
- Q17) I am reluctant to study anything by myself other than during class hours, if
possible.
- Q21) I wish to devote study effort that is barely sufficient to receive a credit unit of a
class.
The obtained data from the joint survey are presented in Figures 6 and 7.
The data of Q17 and Q21 show good similarity. Both reveal that the engineering ethics class
lesson has the effect of improving the study attitude, although that effect might differ
among classes and might not be strong.
(a) CSR (b) Compliance
Fig. 4. Mean of replies to Q3 (CSR) and Q8 (compliance).
Quality Assurance and Management
158
(a) CSR (b) Compliance
Fig. 5. Difference between beginning and ending scores: mean and standard deviation of
replies to Q3 and Q8.
(a) Study attitude (b) Effort to receive credit unit
Fig. 6. Mean of replies to Q17 (study attitude) and Q21 (effort to receive credit unit).
Using a Class Questionnaire for
Quality Improvement of Engineering Ethics Instruction During Higher Education
159
(a) Study attitude (b) Effort to receive credit unit
Fig. 7. Difference of beginning period and ending period: mean and standard deviation of
replies to Q17 and Q21.
5. Conclusion
Useful data to improve the quality of engineering ethics education are obtainable through
questionnaire surveys administered to students, in cases where the survey is conducted at
both the beginning and ending of the class with fundamentally identical contents.
Moreover, joint investigation by lecturers increases the benefits of the survey considerably.
The results of the questionnaire surveys showed the student competency development on
the interest, knowledge and attitude through the engineering ethics learning.
Further analyses of the obtained data and improvement of the questionnaire surveys are
expected. To widen the participation in joint surveys is expected to be useful to improve
engineering classes further.
Although the author believes that the statistical analysis on the scored data of the Likert
items is useful if it remains in a same set of questionnaires, further study might be
necessary.
6. Acknowledgment
The author extends his gratitude to the cooperation of the joint study members; Manabu
Aoyagi (Muroran Institute of Technology), Yoshio Kataoka (Kansai University), Junya
Matsuki (University of Fukui), Kyoko Oba (Kanazawa Institute of Technology), Susumu
Shimamoto (Seikei University), and Kazuo Shimizu (Shizuoka University).
This work was supported by a kakenhi grant (23501028) promoted by the Japan Society for
the Promotion of Science (JSPS)
9
9
http://www.jsps.go.jp/english/e-grants/index.html
Quality Assurance and Management
160
7. References
Fudano, J (2007). The Formation of Ethics Crossroads and the Construction of Science and
Engineering Ethics, Research report submitted to the Japan Science and Technology
Agency (in Japanese, partially in English)
Honda, K et al. (2009). Assessment and Evaluation of Educational Effect in Engineering
Ethics Education. The Paper of Technical Meeting on Frontiers in Education, FIE-09-46,
December 2009, pp. 13-23, Japanese Institute of Electrical Engineers (JIEE) (in
Japanese, partially in English)
Kageyama et al. (2009). Discussion of Engineering Ethics Education Questionnaires and
Opinion from Students at the University of Tokushima. The Papers of Technical
Meeting on Frontiers in Education, FIE-09-60, December 2009, pp. 59-64, Japanese
Institute of Electrical Engineers(JIEE) (in Japanese, partially in English)
Kobayashi, S et al. (2010). A Study on the Objectives, Methods, and Assessment of
Engineering Ethics Education (1) : Toward a Model Sylabus for the Engineering
Ethics Course in Japan, The Papers of Annual Meeting of the Japanese Society for
Engineering Education, No. 4-222, August 2010, pp. 308-309, Japanese Society for
Engineering Education (JSEE) (in Japanese)
Okita, Y et al. (2010). A New Concept for a Business Ethics Program and the Development of
a Monitoring Methods for the Engineering Ethics Environment of a Corporation.
IEEJ Trans. FM, Vol. 130, No. 6, June 2010, p. 11 (in English), pp. 591-600 (in
Japanese) , Japanese Institute of Electrical Engineers (JIEE)
Okita, Y et al. (2010). Evaluation of Engineering Ethics Education by Student Questionnaire
(Part One: Planning). The Papers of Technical Meeting on Frontiers in Education, FIE-
10-46, December 2010, pp. 43-48, Japanese Institute of Electrical Engineers(JIEE) (in
Japanese, partially in English)
Shimizu, K et al. (2010). Evaluation of Engineering Ethics Education by Student
Questionnaire (Part Two: Analysis of Questionnaire). The Paper of Technical Meeting
on Frontiers in Education, FIE-10-47, December 2010, pp. 49-55, Japanese Institute of
Electrical Engineers (JIEE) (in Japanese, partially in English)
9
Towards Learning-Focused Quality
Assurance in Chinese Higher Education
Yuan Li
1
and Houyi Zhu
2
1
Liaoning University of Traditional Chinese Medicine
2
The University of Manchester
1
China
2
United Kingdom
1. Introduction
The concept of quality has been contemplated throughout history and continues to be a
topic of intense interest today (Reeve & Bednar, 1994). A concern about quality and
standards is not new in higher education. Since the mid-1980s, the concept of quality has
increasingly influenced discussion around the globe about the role and future of higher
education institutions and the academics that constitute those institutions (Watty, 2003).
Quality has become a universalising metanarrative (Morley, 2003). Quality and quality
assurance issues in higher education have risen to prominence both nationally and
internationally (Dunkerley & Wong, 2001). Quality parades as a universal truth continually
extends its domain (Morley, 2003). The concern for quality is articulated by university
managers themselves, by external agencies deliberately established to assess and reward
quality and, increasingly, by the clients of higher education the students, the employers
and, importantly, the state (Dunkerley & Wong, 2001). Despite the prevailing use of the
concepts and models of 'quality, many researchers believe that the language and tools of
industry-born quality models are an imperfect fit to higher education (Houston, 2008) and
the concept of customer-defined quality is problematic (Eagle & Brennan, 2007; Houston
2007; Meirovich & Romar,2006).
There is a great number of studies and publications on the issue of quality assurance in
higher education, but most of the studies have difficulties in providing substantial evidence
that the core processes of higher education teaching and learning are improved as a
consequence (Stensaker, 2008). The intuitive answer is that most studies have not reached
the needed level of sophistication, but as Stensaker (2008) points out, this is not necessarily a
problem solely related to methodology, but to the underlying assumptions of quality
assurance and the standard top-down implementation approach. This study is conducted
against the background of the prevailing quality culture, and focuses on student learning
rather than the widely adopted top-down scrutiny of teaching as the main component of
quality assurance schemes. Both systematic literature review and document analysis are
adopted to explore how student learning experiences can be integrated into the quality
assurance systems in Chinese universities for continuous quality improvement. Based on
the discussion of the literature on quality and quality assurance in higher education and a
Quality Assurance and Management
162
detailed analysis of the current quality assurance practice in Chinese higher education, a
learning-focused quality assurance is proposed to offer insights into integrating student
learning generically into the quality assurance process for the purpose of the continuous
improvement of higher education quality.
2. Quality in higher education
Quality had by tradition been seen as an implicit and natural element of university-level
learning and research and an integrated part of academics professional responsibilities.
This changed in the 1990s, with a requirement that higher education institutions should
demonstrate, through their institutional leaders and expressed in comparable measures, the
quality of their activities (Harvey & Askling, 2003). There is substantial agreement that the
quality imperative in higher education was based on pressure from the market and from
governments to adapt to an external political agenda (Dill, 2000; Harvey, 1998; Salter &
Tapper, 2000). Brooks and Becket (2007) point out that the introduction of the quality
imperative in higher education is mainly an externally driven process related to increased
demand for accountability and efficiency in the sector.
In fact, the concept of quality is not always made explicitly, though it is used so often by so
many people inside and outside higher education. Quality is a highly contested concept,
which has multiple meanings for people from different tracks of higher education. Barnett
(1992) argues that there is a logical connection between concepts of higher education and
different approaches to quality. In his opinion, what we mean by, and intend by, quality in
the context of higher education is bound up with our values and fundamental aims in
higher education. We cannot adopt a definite approach toward quality in this sphere of
human interaction without taking up a normative position, connected with what we take
higher education ultimately to be. In turn, what we take higher education to be will have
implications for how we conceive of quality, how we attain it, how we evaluate our success
in achieving it, and how we improve it. So if we want to offer a particular view on quality
we should be prepared to declare where we stand on the key purpose of higher education
(Barnett, 1992). He categorises concepts of higher education into two groups:
Group 1:
Four dominant concepts of higher education underlie contemporary approaches to, and
definitions of, quality: 1) higher education as the production of qualified manpower; 2)
higher education as training for a research career; 3) higher education as the efficient
management of teaching provision; 4) higher education as a matter of extending life
chances. This group of concepts reflects the thinking about higher education of the national
policy makers, funders and institutional managers, and other national interest groups. These
concepts are external to the process of higher education, but are driving national debate and
development work in quality assessment and are informed by a systematic approach to
education (Barnett, 1992). If higher education is perceived as a process of filling particular
slots in the labour market with individuals who are going to be productive, then one way
of assessing quality might be to examine the destinations of the students. Under this
conception, students take on value as, and are described in the vocabulary of, products of
the system (Barnett, 1992).
Towards Learning-Focused Quality Assurance in Chinese Higher Education
163
Group 2:
This group of concepts is concerned with the students development, or the educational
process to which students are exposed. Such concepts include higher education seen as: 1)
the development of the individual students autonomy, with students acquiring intellectual
integrity and the capacity to be their own person; 2) higher education as the formation of
general intellectual abilities and perspectives; 3) the enhancement of the individual students
personal character; 4) the developing of competence to participate in a critical commentary
on the host society. The concern of this group of concepts is with the educational process
that students undergo, not with inputs and outputs and their relationship. This group is not
obviously reflected in contemporary debate over quality assurance in higher education. It
contains ideas about higher education that do not lend themselves to institutional practice
easily captured by system-wide and systematic evaluation procedures such as numerical
performance indicators. But their not fitting the standard model of performance assessment
does not affect the validity of such conceptions of higher education (Barnett, 1992). As
pointed out by Barnett, if we believe that the quality of higher education is more
demonstrated in the nature of the intellectual development that takes place in students
minds, in the depth and breadth of understanding that students achieve, in their ability to
be self-critical, and in their capacity to apply that understanding and self-critical capacity to
all they experience and do, then quality of higher education takes on a quite different
character. Under this conception of higher education, the appraisal of quality will not rest
content with economic indicators of output, but will turn to exploring the educational
process within our institutions. Since there is a logical connection between the development
of a worthwhile state of mind and the experiences and educational processes to which
students are exposed in their course, a conception of higher education of this kind will
prompt an examination of the types of intellectual challenge presented to students, and that
in turn will begin to produce an illumination of the internal life of our institutions.
3. Quality assurance in higher education
There are many definitions of quality assurance in the literature (e.g. Ball, 1985;
Birnbanum, 1994; Frazer, 1992; van Vugh and Westerheijden, 1993; Woodhouse, 1999). The
term quality assurance refers to systematic, structured and continuous attention to quality
in terms of quality maintenance and improvement (Vroeijenstijn, 1995). Girdwood (1997)
defines the term quality assurance as the policies, systems, and processes designed to
ensure the maintenance and enhancement of quality within a programme or institution.
Quality assurance is about ensuring accountability, which gives assurance that it is good
quality. Harman (1998) suggests that in essence, quality assurance refers to the systematic
management and assessment procedures adopted to ensure achievement of specified
quality or of improved quality, and to enable key stakeholders to have confidence in the
management of quality and the outcomes achieved. Quality assurance may in other words
be seen in the context of the regulation of higher education.
Quality assurance is not new. It was originally an integral part of craftsmanship and
professionalism (Morley, 2003). Before the quality imperative prevailed globally, the
concern for quality and development of quality management arose within higher education
institutions. Teachers and administrators within universities and colleges identified what
was right for them to teach and made sure it was taught in the accepted way. In the past two
Quality Assurance and Management
164
decades, the quality imperative in higher education has come from the market and from
government (Houston, 2008). More recently, it has been disaggregated from the professions,
and formalised and transformed into an object of inquiry (Hart, 1997).
The changes, as analysed by Harvey and Askling (2003), occurred for both pragmatic and
ideological reasons. Quality had by tradition been seen as an implicit and natural element of
university-level learning and research and an integrated part of academics professional
responsibilities. In the 1990s, universities were required to demonstrate the quality of their
activities. Universities were used to seeing excellence or transformation as the self-evident
key indicator of higher education quality, but now a self-evident property of higher
education became transformed into a mechanism of control.
Systematic procedures for quality assurance and improvement through formal evaluation
have been in place in Western Europe since the mid 1980s (Bornmann, et al., 2006). Quality
assurance is slowly but steadily becoming an integrated part of higher education (Stensaker,
2008). Quality assurance is by no means a new idea in higher education. For many years,
most major higher education systems have had in place various mechanisms of review and
assessment. What is new, however, apart from the language, is a more systematic and far-
reaching approach to ensuring that institutions and systems have in place mechanisms for
review and assessment, and for renewal and improvement (Harman, 1998). Compared to
past approaches, the new mechanisms also put much more emphasis on external scrutiny,
seeking the views of employers and graduates and, in various ways, making the results of
assessment more widely available (Harman, 1998). Stensaker (2008) summarises this process
as:
In the beginning emphasis was given to design issues and the relationship between
quality assurance systems and the governance of higher education (Neave, 1988);
There was a period with greater interest given to methodological issues;
Much attention was drawn to the human factors (Vroeijenstijn, 1995; Neave, 1996);
Interest in quality stimulated by leadership and the ways to stimulate staff and student
involvement and ownership (Brennan & Shah, 2000);
More and more governments and quality assurance agencies, and higher education
institutions, are held accountable for the impact and outcomes of all this (Stensaker,
2003, 2008; Westerheijden, et al., 2006);
Currently, higher education is entering an era in which a more nuanced understanding of
what quality assurance and quality processes can or cannot prevails (Stensaker, 2008).
3.1 The rationale of quality assurance
Harvey and Askling (2003) argue that from the start quality has been used as a vehicle for
delivering policy requirements within available resources. Quality assurance operates as a
mechanism to encourage policy driven change. It makes higher education more relevant to
social and economic needs, widening access, expanding numbers and doing it with a
decreasing unit cost. The rationale for quality assurance is often opaque (Harvey & Newton,
2007). Quality assurance has two underlying broad rationales: accountability and
improvement. The perpetual debate about accountability and improvement is as old as
quality assurance in higher education (Harvey & Newton, 2007).
Towards Learning-Focused Quality Assurance in Chinese Higher Education
165
Accountability
The term accountability has been widely used in higher education ever since the 1990s.
Accountability relates to processes which assess whether minimum standards are in place in
a higher education institution or programme. Lewis et al. (2001) defines accountability as
demonstrating the worth and use of public resources. Campbell and Rozsnyai (2002) define
accountability as the assurance of a unit to its stakeholders that it provides education of
good quality. Harvey & Newton (2007) identify accountability as a dominant rationale in
quality assurance, but they argue that what exactly accountability is, or requires of the
sector, and how that is related to the quality of higher education is less clear. In their view,
the often stated reason for the rise of accountability include the cost and potential problems
of expansion, the concomitant need to account for increasing amounts of public money, the
need to ensure value for both private and public monies, lack of clear lines of accountability
within higher education systems, globalisation and the need to keep control of an
increasingly unrestricted market (Harvey, 2002). Accountability is seen as a major purpose
of external quality processes. Harvey (2002) suggests that accountability has five main
functions:
To ensure that the institution or programme is accountable for the money it receives;
To ensure that the core principles and practices of HE are not being eroded;
To ensure that the programme is organised and run properly and that an appropriate
educational experience is both promised and delivered;
To provide proper public information for funders to aid funding allocation decisions,
and for prospective students and graduate recruiters to inform choice;
To ensure compliance with policy.
Improvement
Quality improvement focuses on developmental processes. Improvement potentially
depends on the development of definitions and interventions that reflect the interests and
concerns of those in the sector (Houston, 2008). Continuous improvement aims at continual
increase of performance by emphasising learning and adaptation as keys to success of an
organisation, which is also one of the core values of quality management (Deming, 1994;
Evans & Lindsay, 2001). Harvey and Askling (2003) point out that improvement has been a
secondary feature of most quality assurance systems despite the claims of most external
reviews to encourage improvement.
Temponi (2005) suggests the adoption of a continuous improvement approach requires not
only upper administration commitment, but also uncovering the current underlying culture
and examining the appropriateness of objectives to adopt continuous improvement.
Creating a quality culture and long-term commitment to continuous improvement within an
academic institution means engaging the administrative and academic systems, and all
stakeholders of higher education institutions.
The tension between accountability and improvement
Harvey (2002) points out there has been increasing uniformity of practice for quality
monitoring in higher education. This is a pragmatic response to government requirements
to demonstrate value for money and fitness for purpose. Nevertheless, what purpose and
what constitutes fitness is unclear. The links between accountability mechanisms and
Quality Assurance and Management
166
quality improvement are rarely clear. Vroeijenstijn and Acherman (1990) point out the
tension between accountability and continuous quality improvement. Arguably,
accountability is about value for money and fitness for purpose, while continuous
improvement in teaching and learning is about enhancement of the student experience, and
empowering students as life-long learners. They also argue that the improvement essence of
quality is sidelined in the assurance process by a focus on demonstrating compliance. Thune
(1996) argues that accountability and improvement are based on different methods based on
the ownership of the evaluation system. He identifies that the improvement process has a
different form and is independent of control. He argues from his Danish case that
accountability and improvement may be combined in a balanced strategy. Middlehurst and
Woodhouse (1995) explore whether it is feasible to combine the function of accountability
and quality improvement in national arrangements for quality assurance in higher
education. They identify that accountability and improvement must be conceptually and
practically distinct with separate resourcing. The failure to address different purposes will
damage the quality and the integrity of higher education by imbalances of power.
The accountability-led view sees improvement as a secondary function of the monitoring
process. Following this approach, external monitoring of quality will lead to improvement
as a side effect (Harvey and Newton, 2007). In other words, requiring accountability will
lead to a review of practices, which in turn will result in improvement. Harvey (1994)
questions this accountability-led view. First, facing a monitoring system demanding
accountability, academics will tend to comply with requirements and to minimise its
interruption in their existing practice. Second, improvement comes from a changed culture
and local ownership, which is in conflict with the principle of compliance in accountability.
Third, the extra burden of responding to external scrutiny leads to the feeling of lacking
trust, which will demotivate staff who are already involved in innovation and quality
initiatives. Harvey and Newton (2007) suggest a view counter to the accountability-led one,
which will result in quality improvement: improvement is its own accountability. In other
words, if an organisation continually improves it is accountable. This returns the ownership
of the quality assurance system to academics. In their view improvement is not something
regulated but something attained through critical engagement.
Harvey and Askling (2003) point out the most effective improvement occurs when external
processes mesh with internal improvement activities. It is more difficult for external quality
assurance to encourage the learning-teaching interface. They argue that the improvement
function of quality assurance procedures is to encourage institutions to reflect upon their
practices and to develop what they do. Therefore, quality assurance needs to be designed to
encourage a process of continuous improvement of the learning process and the range of
outcomes.
3.2 The approaches to quality assurance
In one of the earliest classifications of the different approaches to quality assurance, Dill
(1992) distinguishes between three forms: the reputational approach, the student outcome
approach, and the total quality (management) approach. The reputational approach uses
peer review to assess the quality of higher education institutions or programmes. The
student outcome approach measures student achievements both when attending higher
education and after graduation. The total quality management approach is based on
Towards Learning-Focused Quality Assurance in Chinese Higher Education
167
participation, customer orientation, organisational learning and coordination. Over time,
approaches to quality assurance are widely discussed and analysed at theoretical level and
vary widely among countries.
Billing (2004) explores international comparisons of the purpose of quality assurance in
higher education and the extent to which the main national quality assurance frameworks
meet this. He concludes with a general model, which summarises the purposes of quality
assurance into:
Improvement of quality
Publicly available information on quality and standards
Accreditation (i.e. legitimisation of certification of students)
Public accountability for standards achieved and for use of money
To contribute to the higher education sector planning process
Van Vught and Westerheijden (1993) summarise the common elements of quality
frameworks in European countries:
A national agency to co-ordinate and support quality assurance within institutions,
which is independent of government;
Self-evaluation as the vital focus of the external quality assurance process;
External peer review to explore the self-evaluation with the higher education institution
(normally by a site visit);
Public reports of these evaluation activities;
No direct relationship of the results of external quality assurance to the funding of
higher education institutions.
Thune (2002) summarises the important procedural elements shared among European
quality assurance systems: internal self-evaluation; visits by external expert review panel;
external evaluation; and public reporting. Harvey (1998) summarises the approaches of
quality assurance into: accreditation and evaluation of institutions, audit of procedures
within an institutions, accreditation of programmes of study, assessment of teaching quality
in subject areas or of programmes, research assessment, and standards monitoring. Harvey
and Askling (2003) point out that external quality monitoring takes many forms, ranging
from accreditation and institutional audit, through subject assessment and standards
monitoring to customer surveys. They have varied objects, foci and purposes and relate to
different notions of quality and standards. Harvey and Askling (2003) summarise the object,
focus, rationale, approach and mechanisms for quality evaluation under four headings:
accountability, control, compliance and improvement.
In Harvey and Asklings (2003) model, the main objective of the quality monitoring process
may be the provider in institutional review, medium of delivery, output in programme
review, or learners in some cases. The focus may be governance and regulation, curriculum
design and administration, learning experience or qualification. The specific purposes of
quality monitoring fall under four broad headings: accountability, control, compliance and
improvement. External quality monitoring takes several forms, ranging from accreditation
and institutional audit, subject review and standards monitoring to customer survey.
Quality Assurance and Management
168
Objective Focus Rationale Approach Mechanism
Provider Governance &
regulation
Accountability Accreditation Self-assessment
Medium of
Delivery
Curriculum Design,
Administration
Control Audit Performance
Indicators
Output Learning
Experience
Compliance Assessment Visit
Learner Qualification Improvement Standards
Monitoring
Customer
Surveys
Table 1. Object, focus, rationale, approach and mechanisms for external evaluation (Source:
adapted from Harvey & Askling, 2003)
Accreditation
Accreditation is a public statement that a certain threshold of quality is passed (Campbell et
al., 2000). The formal public recognition embodied in accreditation is seen as being based on
agreed, pre-defined standards or criteria (El-Khawas, 1998). Accreditation has two nuances:
first, the abstract notion of a formal authorising power, enacted via official decisions about
recognition and; second, the quality label that institutions or programmes may acquire
through certain accreditation procedures (Haakstad, 2001, as cited in Harvey & Askling, 2003).
Accreditation may be of an institution or a programme of study. Accreditation tends to focus
on inputs, for example, resources, curriculum and staffing. It may address the teaching process
but not focus on outcomes of education, for instance, graduate attributes and employability
(Harvey & Mason, 1995). In principle accreditation is based on recognition that the institution
has in place appropriate control and monitoring processes to ensure satisfactory quality and
standards. Accreditation is usually based on an evaluation of whether the institution meets
specified minimum (input) standards such as staff qualifications, research activities, student
intake, and learning resources (Harvey & Askling, 2003).
Audit
Quality audit is the process of checking to ensure externally or internally specified practices
and procedures are in place (Harvey & Askling, 2003). Audits ensure that the institution has
clearly defined internal quality monitoring procedures linked to effective action. An audit is
often considered as having the potential of meeting many of the expectations of external
control at the same time as it might support improvement (Dill, 2000).
Assessment
Quality assessment sets out to measure the level of quality of inputs, processes and outputs
(Harvey & Askling, 2003). Quality assessment may be a judgement of the overall quality of
an institution or programme, or of specified component elements. Many assessments are
supposedly of fitness for purpose. Institutions or programmes are assessed against mission
based criteria. Assessment might include a complex grading system or might be based on a
simple satisfactory/non-satisfactory dichotomy (Harvey & Askling, 2003). Assessments may
benchmark against other institutions, national norms, or against oneself over time.
Assessment may also focus on inputs (for example, teaching staff, learning resources), or
process (for example, teaching, learning, support services), or outcomes (for instance,
Towards Learning-Focused Quality Assurance in Chinese Higher Education
169
students academic standards of achievement or professional competence, employment
rates, students perception of their learning). Assessment evidence includes statistical
indicators, observation, direct evaluation of research outputs, student and graduate views,
employer views, student performance, self-assessment and other documentation, discussion
and interviews with teachers, students and managers, and perceptions of other agencies,
such as professional bodies (Harvey & Askling, 2003).
Standards monitoring
Standards monitoring makes use of external examiners and has a longer history than
external quality evaluation. Harvey and Askling (2003) summarise two main foci of
standards monitoring: first, academic standards of a programme of study, identified by the
academic work produced by students; second, standards of professional competence,
identified through the ability or potential to undertake professional practice. They also
argue that standards monitoring may specify standards that are appropriate, or it may
endeavour to ensure that standards are at appropriate levels, possibly by checking or
grading student work or performance. The purpose of standards monitoring may also be
ensuring comparability of standards across the sector or across specific subjects within
subject disciplines. Sometimes external examiners grade directly but usually standards are
inferred by scrutiny of a sample of work or by monitoring award statistics.
Customer surveys
Quality evaluation often includes participant or client satisfaction with service provision
which is at institutional, programme or module level in the higher education context. The
feedback from students, graduates or employers is collected to enhance the normal process
of self-assessment, statistical indicators and peer review (Harvey & Asklilng, 2003).
Different quality assurance procedures affect universities in many ways. These procedures
exert both direct and indirect impact on universities. In the process of implanting external
quality assurance, new management and self-regulation, as alternatives to the former
models of quality management are institutionalised. Westerheijden (2001) argues that
external quality monitoring leads to uniformity rather than diversity. External quality
monitoring actually inhibits innovation because of the application of conservative or rigid
evaluation criteria. Dano and Stensaker (2007) argue that the role and function of external
quality assurance is of great importance for the development of an internal quality culture in
higher education. Harvey and Askling (2003, p. 81) argue that:
Individual teachers within fields of teaching and learning and didactics have inspired each other
and also challenged university teachers to make powerful contributions to improve university
teaching. These researchers and teachers contribute in turning the quality issue, which was
originally imposed by governments, into something empowering teachers and students.
3.3 The role of students in quality assurance
In recent years, the role of students in the quality assurance of higher education has been
recognised across the world. Across the world, students increasingly play their role in the
quality assurance process through providing feedback on the courses they have taken and
on the general satisfaction with their educational experiences. Reviewing the literature
relating to this topic, we may find that students are more and more involved in measuring
Quality Assurance and Management
170
quality and in improving their own learning experiences. Student voice is increasingly
heard through providing feedback, contributing to the development of learning and
teaching, participating in the university decision making process, and presenting student
views in a number of ways (Alaniska et al., 2006).
Giving feedback is the most common way through which students participate in quality
assurance. The increasingly competitive environment in higher education leads universities
to monitor levels of their student satisfaction (King et al., 1999). There is a wide diversity in
how, when and what kind of feedback students give. It is typical that feedback is given after
each course or at least once in a term. It is believed that student feedback can be used as an
effective tool for quality improvement. Harvey (1995) suggests that student satisfaction goes
hand in hand with the development of a culture of continuous quality improvement.
Rowley (2003) identifies four main reasons for collecting student feedback:
To provide students opportunities to pass comments on their courses and to collect
information for improvement;
To encourage student reflection on their learning;
To allow institutions to benchmark and to provide indicators that will contribute to the
reputation of the university in the marketplace; and
To provide students with an opportunity to express their level of satisfaction with their
academic experiences.
Both student feedback on courses and these national student surveys are increasingly used
by higher education institutions across the world as an important component of quality
assurance processes. Students are playing a more and more important role in quality
assurance through these surveys. Though student learning experiences are internal issues
inside higher education institutions, the publication of survey results and league tables
produced accordingly make the internal things external. These surveys provide a means for
students, their parents, employers and other stakeholders to assess the quality of these
institutions. Therefore, student surveys have become a very useful tool for higher education
institutions to benchmark themselves in the higher education market and to monitor the
quality of higher education provision.
4. Quality assurance in chinese higher education
Over the last two decades the landscape of Chinese higher education has changed greatly
through a process of profound restructuring, decentralisation, introduction of market
incentives, university mergers, internationalisation, and enlarging student enrolment. The
higher education sector in China has expanded and become more differentiated, especially
vertically through reputational differences and funding differentiation. Most universities
have expanded their campuses and have shifted to a more market-led culture. The student
body has become more diverse with the greatly and rapidly increased numbers, which
means students enter higher education with different entry levels and for a greater variety
of purposes. Universities compete strongly for their teaching and research funding, and are
expected to be more accountable for the funds they receive and tuition fees they charge, and
to be more relevant to the economic and social needs of the nation. Along with the
expansion of Chinese higher education, the issue of quality has become a concern and has
attracted a lot of attention in the Chinese higher education sector. Developing quality
Towards Learning-Focused Quality Assurance in Chinese Higher Education
171
assurance schemes has been given priority in the agenda of most Chinese higher education
institutions. The nationwide implementation of quality evaluation since 2002 is the main
means used by the Chinese government to address the potential quality decline and to
realise a macro level control over Chinese higher education institutions.
4.1 The structure of quality assurance in chinese higher education
In the past decade, the introduction of quality assurance regimes into Chinese higher
education has covered a broad spectrum of initiatives, from national policy, methodologies
of quality evaluation, institutional adoption of quality assurance schemes, to a matrix of
quality evaluation systems (with teaching quality evaluation and discipline-based
evaluation as the main focus supplemented by a range of other evaluations). In China, at the
national level, the responsibility for quality assurance lies with the National Education
Evaluation Centre, the specialised agency set up by the Ministry of Education in 2004. It is
mandated to coordinate evaluation processes, develop appropriate methods for future
quality assessment, guide institutions in their quality assurance development, and compile
and publish information on higher education quality. Overall, the structure of the quality
assurance system in Chinese higher education can be summarised into external quality
assurance processes, and systems within higher education institutions (Figure 1).
Fig. 1. The structure of quality assurance in Chinese higher education (Li, 2010, p. 66)
The external system can be characterised by three main components: the governments
supervision through policy guidance; the governments monitoring through various
evaluations carried out by government agencies, among which the most influential ones are
the national teaching quality evaluation and the discipline based reviews; the newly
emerging non-governmental evaluation agencies and university rankings produced by
various non-governmental institutions.
Various measures have been adopted to enhance the quality of education and research
activities in Chinese higher education, especially the launch of Project 211 and Project 985.
These have had a great impact on quality enhancement in Chinese higher education
(Huang, 2005). In addition to these two big projects, other efforts have also been made to
Quality Assurance and Management
172
assure and improve the quality of education in all Chinese higher education institutions
since 2002, including:
Requiring all professors to teach undergraduate courses and encouraging senior
professors to teach core courses and undergraduate courses;
Setting grants for learning resource renovation;
Setting grants for developing courses of excellence;
Setting grants for compiling textbooks of excellence;
Selecting and awarding the national outstanding professors in teaching;
Establishing the Higher Education Evaluation Centre to coordinate various kinds of
quality evaluation activities.
Up to now, the education evaluation network in China has been based on evaluation
agencies at both national and regional levels (Ding, 2008). At the national level, the
Evaluation Office of the Higher Education Department, Ministry of Evaluation, is the
government administrative unit in charge of education quality evaluation. The Higher
Education Evaluation Centre and the China Academic Degrees & Graduate Education
Development Centre are agencies affiliated to Ministry of Education, specialising in
conducting evaluations in the Chinese higher education sector. At the regional level, most
provincial governments have established their own education evaluation agencies,
responsible for education quality evaluation in their provinces.
Currently higher education quality evaluation in China is compulsory and operated by
evaluation panels appointed by Higher Education Evaluation Centre. The process of higher
education evaluation in China, as in many other countries, includes five basic elements:
Standards and guidelines issued by the quality evaluation agency and an evaluator
panel appointed by the government agencies;
An institutional self-review report is provided;
The evaluation panel conducts on-site visits;
The panel reports back to the institution and Ministry of Education;
Higher education institutions write their self-improvement report and carry out their
self-improvement activities.
In the past decade institutions have been faced with an increase in levels of legislation and
involvement from national and local governments, especially in attempts to assure the
quality of higher education through formal evaluation techniques and accountability
processes. The development of internal quality assurance systems in Chinese universities is
the current main emphasis of the quality movement in the Chinese higher education sector.
Following the first five-year cycle of national teaching quality evaluations (2002-2007, with
an extension to 2008), higher education institutions in China are now encouraged and
required by the Ministry of Education to develop their own institutional based quality
assurance systems. The common features of internal quality assurance systems in Chinese
higher education institutions are (Ding, 2008; Li et al., 2008; Shi et al., 2008):
The establishment of institutional teaching evaluation centres. These centres are
affiliated to or in cooperation with the teaching management office of the institution.
Those universities without independent teaching evaluation centres have their own
sub-section playing similar roles under the supervision of the teaching
affairs/management office. The main responsibilities of these centres are developing
and operating the internal quality assurance system.
Towards Learning-Focused Quality Assurance in Chinese Higher Education
173
The formation of teaching supervision/steering groups. This is also a common practice
among Chinese higher education institutions. The group members are the senior
teaching staff or retired senior staff with expertise in teaching and teaching
management. They are under the supervision of the Vice President for teaching. They
are expected to carry out their work directly with teachers and students by observing
classes, talking with teachers and students after class. Their responsibilities are to find
problems in teaching, and to provide advice on the solutions.
Peer review. Class teaching observation is also a common practice in most Chinese
higher education institutions. Teachers are required to observe each others classroom
teaching, which is considered as a useful way for teachers to learn from each other and
to monitor each others teaching. Besides peer teaching observation, leaders at different
levels inside the higher education institutions are required to observe teachers
teaching.
Student feedback, which is considered as one of the most important quality assurance
components, is conducted through surveys, individual and group interviews, student
representative reporting, etc. Student surveys are the most commonly used form of
student feedback collection, which covers course evaluation, teaching evaluation, and
other fields of interest.
Annual report. Annual institutional self-review report is also a component of internal
quality assurance systems. Though the main purpose of such annual self-review reports
is not specifically for the sake of quality assurance, it indirectly contributes to realising
quality assurance in those institutions.
Teacher training. Teacher training includes pre-work training, in-service training, and
other types of training for teachers. Teachers pre-work training is considered as the
most important of all training schemes. All new teachers are required to attend such
training in all Chinese higher education institutions.
4.2 The discrepancy between the current quality assurance and student learning
There has been a tendency to take a top-down approach to the identification and
classification of quality assurance issues in Chinese higher education. As a result of the
nationwide teaching quality evaluations from 2002 to 2008 and of international exchange,
there is a growing body of experiences and knowledge of quality and quality assurance
paradigms and cultures. Building up internal quality assurance systems was initiated by the
Ministry of Education after the first round nationwide of external teaching quality
evaluations. A new round of experimentation and exploration has followed. Various
theories, paradigms, and models are being adopted in the Chinese universities exploration
of the quality jungle.
From analysing quality and quality assurance in both Chinese higher education and across
the world, we may find that the objectives of quality assurance are largely external influence
driven and targeted at efficient and effective management of teaching. The problem
observed is that the ultimate aim of higher education, namely the intellectual development
and growth of students, has not been given enough emphasis. Most quality assurance
policies are generally initiated by the government. The external quality assurance is
controlled by the government agencies, and the internal quality assurance is in the hands of
teaching administrators. This top-down implementation remains dominant and controls
Quality Assurance and Management
174
quality assurance activities. The problem observed in this top-down quality assurance is that
it has not involved teachers and students actively. Teachers are used as the objects of quality
scrutiny and students as the providers of information for teacher and teaching appraisal.
The areas covered by external quality assurance in Chinese higher education can be seen from
the institutional quality assurance regulations and procedures. It is the product of the
universities compliance with the national education policies. The areas covered by internal
quality assurance mainly include the systematic regulations on teaching, teaching
management, teacher appraisal, and students feedback on teachers and teaching. We may see
that the current quality assurance does not address directly the processes of student learning.
The procedures of quality assurance establishment and development in Chinese higher
education institutions are a top-down, external influence driven process. They are initiated
by the Ministry of Education, and their implementation is guided and supervised by the
Higher Education Evaluation Centre. This requires the compliance of higher education
institutions in establishing and developing elaborate and comprehensive internal
procedures to support the assertions of quality. Such top-down procedures have very little
effect on the actual process of student learning and development. In addition, the
information collected through quality assurance procedures focuses on resources, teacher
qualifications, teaching management, and performance indicators measuring learning
outcomes, for example, graduate employment rates. Such information may indicate
institutional resources and management and provide a snapshot of what is happening at a
certain point in time. However, it is not sufficient to inform quality improvement and
student learning development.
Across the world, the exploration of quality in higher education has been dominated by
compliance with external agencies definition of quality as assurance, accountability,
audit and assessment (Houston, 2008). Compliance with the definition imposed from
outside the university largely ignores the views of academics, students and others inside
who are positioned as the affected but not involved (Ulrich, 2001). We may see the
discrepancy between student learning quality and what the current quality assurance
assures from the above summary. If we intend to improve the quality of higher education,
we should consider how we can incorporate the student learning experience into quality
assurance systems to inform the university, teachers, administrative staff, students what and
where to work on for improvement. The key issue here is how to incorporate student
learning into quality assurance and how to make sure the direct factors influencing student
learning quality are managed in a meaningful way, so that continuous quality improvement
becomes realisable.
5. Learning-focused quality assurance
Many problems analysed above are linked to a teaching oriented conception of education.
The efforts to improve student learning have been underpinned by the belief that learning
quality can be assured by teaching quality. Subtly but profoundly it is time to shift higher
education institutions from the conception of being an institution complying with external
requirements and providing instruction to the ones producing quality learning. It is
necessary and urgent to construct a learning-focused concept of education and a way of
ensuring the quality defined under this concept.
Towards Learning-Focused Quality Assurance in Chinese Higher Education
175
This learning-focused concept is put forward against the background that the prevailing
teacher centred concept of teaching fails in producing quality learning, and the context that
the current quality assurance play a very limited role in assuring and promoting student
learning. As previously noted, in current quality assurance systems, quality improvement
procedures stated in the institutional follow-up reports are mainly about improving
teaching profiles and teacher qualifications, but in reality the responsibility for quality
enhancement is left to the sense of responsibility or to the priorities of individual teachers.
Teachers tend to view external imposition of evaluation and changes as a burden. The
quality enhancement initiative, mostly in the form of teaching projects, will only work for
those teachers who have an interest in it. Their research usually ends in their publication. It
is unlikely to initiate an overall improvement in teaching and learning. Most teachers still
teach in the same way, and the quality of learning still relies on who the students are.
Learning-focused quality assurance, as shown in its name, shifts the focus of quality
assurance, away from scrutinising institutional compliance with external requirements and
scrutinising teaching, towards focusing on improving student learning quality. Learning-
focused quality assurance, shown in Figure 2, adopts a more student-oriented approach to
learning and teaching and is more sensitive to student learning development. It appreciates
student learning experiences, emphasises the interface of teaching and learning, and focuses
on student learning activities and approaches.
To improve education quality, universities need to identify and address the characteristics,
needs and expectations of students, to respond to different levels of student preparedness
while maintaining academic standards, to re-conceptualise teaching and learning in the new
paradigm of higher education, to reposition its knowledge functions, and to managing
multiple external forces influencing them.
Fig. 2. Learning focused quality assurance
Quality Assurance and Management
176
Quality improvement is a complicated process, which needs a holistic system and the
engagement of teachers, administration staff, and students. Students learning experiences
need to be integrated into a regular and continuous cycle of data collection, analysis,
reporting, transforming into feasible enhancement plans and action, and integrating into
learning and teaching practice. Enhancing student learning quality requires a system which
may collect appropriate learning and teaching data, identifying the areas for improvement
after analysis, delegating responsibility for action to the agents involved, encouraging the
ownership of improvement action through the facilitation of the appropriate institutional
support of both internal and external resources that can be used, exchanging experiences
among students, teachers and administration staff, and stabilising positive experiences into
learning and teaching practice.
Learning-focused quality assurance is student learning focused, quality improvement
oriented and research informed. It is a holistic system and requires the engagement of
teachers, administration staff, and students. In learning-focused quality assurance, students
learning experience are integrated into a regular and continuous cycle of data collection,
analysis, reporting, transforming into feasible enhancement plans and action, and
integrating into learning and teaching practice. Establishing this is not an easy task, and
needs a holistic system of dialogue, participation and responsibility. Learning-focused
quality assurance is student learning oriented and supported by the principle of dialogue,
participation and responsibility.
Dialogue is the first principle in learning-focused quality assurance. The agents of quality
improvement are teachers, students, quality assurance administrative staff, and other staff
related in universities. Dialogue is the communication between them. This dialogue will
enhance students understanding and motivation to learn and teachers understanding of
student learning and their support for this process. The dialogue among teachers will help
them be more reflective in their teaching, improve the curriculum, and give better teaching
to students. The dialogue between teachers and quality assurance administrators and other
staff will help teachers communicate their expected support to their teaching and student
learning and keep the university informed of resources needed. The dialogue between
university and students through quality assurance systems will help students to understand
the vision and values of their universities and help the staff understand student learning
needs so that they may configure the necessary support appropriately.
Participation is the second principle in learning-focused quality assurance. Quality
improvement is unlikely without the active participation of the three main agents inside
higher education institutions: teachers, students, administrators. In almost every step in
learning-focused quality assurance, their participation is necessary. Quality learning at any
universities requires the active participation of both teachers and students. This process is
guaranteed by quality assurance staffs action of involving both teachers and students in
designing how to collect student learning data, to best understand and grasp the
information about student learning and to disseminate the information to related
departments and people. This participation at the stage of data collection can be in multiple
forms: by contributing ideas in designing questionnaires and themes of qualitative enquiry,
giving feedback to the designed questionnaires, communicating opinions and insights in
discussion groups, and providing reliable information in any student learning data
collection processes. The participation at the stage of analysing results is mainly in the way
Towards Learning-Focused Quality Assurance in Chinese Higher Education
177
that all related agents contribute their interpretation, which will make the next step of
identifying necessary action more evidence based and will better address the needs in
reality. The participation at the stage of identifying areas for action is to discuss what and
how to improve quality and to reach a consensus, so that the appropriate quality
enhancement procedures will be established. Participation at this stage of delegating
responsibility for action implies that all involved agents are to take their respective
responsibilities in taking action.
Responsibility is the third principle in learning-focused quality assurance. It is essential for
any quality enhancement initiatives to have effects. Teachers responsibility is to undertake
the quality enhancement initiatives actively, to reflect on their own teaching, to understand
student learning, to explore how to better align their teaching to student learning, to
organise a better learning environment through their teaching and their dialogue with other
stakeholders, to develop their curriculum regularly, to provide appropriate feedback to
students, and to encourage them to take their own responsibility for learning. Students
responsibility is to become the owners of their own learning by thinking and developing
their learning objectives, participating actively in learning, managing their learning time and
activities appropriately, reflecting on their own learning approaches and engagements
regularly, communicating their learning needs and questions to teachers and other staff
promptly, participating in the quality assurance process, providing feedback actively, and
making good use of resources and support to reach the best learning outcomes. University
administrators are the facilitators and coordinators in the whole process. Their responsibility
is to manage data collection and analysis, to coordinate the participation of teachers and
students in the process of data collection, analysis, interpreting results, and identifying areas
for action, to ensure the quality of their participation and the feasibility of the enhancement
plan, to identify and provide effective support to both teachers and students in the process
of their undertaking the quality enhancement actions by organising training, workshops,
courses, forums, consulting sessions with the support of internal and external experts and
resources.
In learning-focused quality assurance, the responsibility for quality enhancement will not
be left to the sense of responsibility or to the priorities of individual teachers, as the
current quality assurance does. Universities will take their responsibilities in providing
the incentives and support structures for teachers to enhance their teaching, and for
students to become the owners of their learning. Both teachers and students are not
staying passively at the receiving end of quality assurance; instead, they are the key
agents and drivers of continuous quality improvement. It is also important to approach
quality holistically and combine cultural elements, structural dimensions and
competencies into one holistic framework, in order to enable stakeholders to develop
visions, shared values and beliefs, and to delegate the ownership of learning and
improvement at all institutional levels.
6. Conclusion
To summarise, improving quality is about a change in culture, which involves a slow
process of evolution (Harvey, 1998). Quality assurance should not be the synonym of
formalism and conformism; instead, it can be used as catalyst for change from teaching-
focused higher education to a new paradigm with more focus on student learning.
Quality Assurance and Management
178
Learning-focused quality assurance is built on a more holistic understanding of the
relationship between quality assurance and learning enhancement. The role of learning-
focused quality assurance involves monitoring and managing the complex learning
situation, and improving the quality of student learning. The core of learning-focused
quality assurance is learning: student learning quality and how universities and teachers
facilitate students to improve their learning.
We are clear that quality in the context of higher education is bound up with our values
and fundamental aims in higher education. It is never unnecessary for higher education
institutions to ask themselves what the term quality means to them. In this chapter, we
have taken the view on quality from student learning and development. Therefore, the
implications we draw here are based on the viewpoint that student learning quality should
be the focus of a universitys quality.
A sophisticated quality assurance system does not mean students learning quality can
be assured. It is not necessarily a problem related simply to methodology, but to the
underlying assumptions of quality assurance and the standard top-down
implementation approach. The quality assurance mechanisms should focus on the
quality of student learning.
It is necessary to create a structure for teachers, students and administrators to have
dialogue on learning, to actively participate in the quality improvement actions, and to
take their responsibility in assuring and improving learning quality. Keeping the
ongoing dialogue, sustaining active participation of students, teachers and
administrative staff, and encouraging them to take responsibility for learning and
improving quality play a significant role in assuring and improving learning quality.
The student learning experiences need to be integrated into a regular and continuous
cycle of information collection, analysis, reporting, transforming into feasible
enhancement plans and action, and integrating into learning and teaching practice.
Integrating individual learning into a learning-focused culture will strengthen quality
learning on campus and nurture the learning of individuals involved.
Universities should also encourage and support teachers with all possible resources to
reflect on their own teaching, to understand student learning, to explore how to better
align their teaching to student learning, to organise a better learning environment
through their teaching and dialogue with other stakeholders, to develop their
curriculum regularly, to provide appropriate feedback to students, and to encourage
them to take their own responsibility for learning.
Institutional support in sustaining the quality engagement of teachers, administrators, and
students is critical because quality improvement is not something regulated but something
attained through critical engagement of all stakeholders involved. The learning-focused
quality assurance proposed in this study encourages care for quality at all levels in
institutions through care for learning. Such a quality assurance system requires higher
education institutions to establish clear learning orientation, to actively involve students,
teachers and administrators, to ensure dialogue among teachers, students, and
administration staff, to support teachers to research and improve their teaching, and to
create and sustain an environment which may enable students to be the owners of their own
learning, and further to realise the continuous quality improvement in higher education
institutions. At the end of the chapter, we need to say that the learning-focused quality
Towards Learning-Focused Quality Assurance in Chinese Higher Education
179
assurance proposed in this study is very conceptual. Further studies investigating how to
translate this conceptual model into real world practice to motivate teachers, students and
administrators to commit themselves in improving learning quality might be needed.
7. References
Alaniska, H., Codina, E. A., Bohrer, J., Dearlove, R., Eriksson, S., Helle, E., & Wiberg, L. K.
(2006). Student Involvement in the Processes of Quality Assurance Agencies, European
Association for Quality Assurance in Higher Education, Helsinki, Finland
Ball, C. (1985). Fitness for Purpose: Essays in Higher Education, SRHE & NFER-Nelson,
Guildford
Barnett, R. (1992). Improving Higher Education, SRHE & Open University Press, Buckingham
Billing, D. (2004). International Comparisons and Trends in External Quality Assurance of
Higher Education: Commonality or Diversity? Higher Education, 47, 113-137
Birnbaum, R. (1994). The Quality Cube: How College Presidents Assess Excellence. Journal of
Higher Education Management, 9(3), 71-82
Bornmann, L., Mittag, S., & Daniel, H. D. (2006). Quality Assurance in Higher Education -
Meta-evaluation of Multi-stage Evaluation Procedures in Germany. Higher
Education, 52(4), 687-709
Brennan, J., & Shah, T. (2000). Managing Quality in Higher Education: An International
Perspective on Institutional Assessment and Change, OECD, SRHE & Open University
Press, Buckingham
Brookes, M., & Becket, N. (2007). Quality Management in Higher Education: A Review of
International Issues and Practice. International Journal of Quality Standards, 1(1), 1-23
Campbell, C., Kanaan, S., Kehm, B., Mockiene, B., Westerheijden, D. F., & Williams, R.
(2000). The European University: A Handbook on Institutional Approaches to Strategic
Management, Quality Management, European Policy and Academic Recognition,
European Training Foundation, Torino
Campbell, C., & Rozsnyai, C. (2002). Quality Assurance and the Development of Course
Programmes, UNESCO, Bucharest
Dano, T, & Stensaker, B. (2007). Still Balancing Improvement and Accountability?
Developments in External Quality Assurance in the Nordic Countries 1996-2006.
Quality in Higher Education, 13(1), 81-93
Deming, W. E. (1994). The Need for Change. Journal for Quality and Participation, 17(7), 30-32
Dill, D. (1992). Quality by Design: Towards a Framework for Academic Quality
Management, In: Higher Education: handbook of Theory and Research, J. Smart (Ed.),
Vol. VIII, pp. 37-83, Agathon Press, New York
Dill, D. (2000). Capacity Building as an Instrument of Institutional Reform: Improving the
Quality of Higher Education through Academic Audits in the UK, New Zealand,
Sweden, and Hong Kong. Journal of Comparative Policy Analysis, 2(2), 211-234
Ding, X. (2008). Research on Quality Assurance in Higher Education, Jiangsu Education Press,
Nanjing
Dunkerley, D., & Wong, W. S. (2001). Global Perspectives on Quality in Higher Education,
Ashgate, Aldershot
Eagle, L., & Brennan, R. (2007). Are Students Customers? TQM and Marketing Perspectives.
Quality Assurance in Education, 15(1), 44-60
Quality Assurance and Management
180
El-Khawas, E. (1998). Accreditations Role in Quality Assurance in the United States. Higher
Education Management, 10(3), 43-56
Evans, J., & Lindsay, W. M. (2001). The Management and Control of Quality, South-
Western/Thomson Learning, Cincinnati OH
Frazer, M. (1992). Quality Assurance in Higher Education, In: Quality Assurance in Higher
Educatio, A. Craft (Ed.), pp. 9-29, Routledge, Hong Kong
Girdwood, A. (1997). Quality Assurance in Higher Education: Trends and Aspects,
Proceedings of Seminar on Quality Assurance in Higher Education, Tertiary Education
commission, University of Mauritius, October 1997
Haakstad, J. (2001). Accreditation: the New Quality Assurance Formula? Some Reflections
as Norway is about to Reform its Quality Assurance System. Quality in Higher
Education, 7(1), 77-82
Harman, G. (1998). The Management of Quality Assurance: A review of International
Practice. Higher Education Quarterly, 52(4), 345-364
Hart, W. A. (1997). The Quality Mongers. The Journal of the Philosophy of Education, 31(2), 295-
308
Harvey, L. (1994). Continuous Quality Improvement: A System-wide View of Quality in
Higher Education, In: University-Wide Change, Staff and Curriculum Development. P.
T. Knight (Ed.), pp. 47-70, SEDA, Birmingham
Harvey, L. (1995). Student Satisfaction. The New Review of Academic Librarianship 1(1), 161-173
Harvey, L. (1998). An Assessment of Past and Current Approaches to Quality in Higher
Education. Australian Journal of Education, 42(3), 263-276
Harvey, L. (2002). Quality Assurance in Higher Education: Some International Trends,
Proceedings of the Norwegian Higher Education Conference, Oslo, 22-23 January 2002
Harvey, L., & Askling, B. (2003). Quality in Higher Education, In: The Dialogue between
Higher Education Research and Practice, R. Begg (Ed.), pp. 69-83, KLUWER, London
Harvey, L., & Mason, S. (1995). The Role of Professional Bodies in Higher Education Quality
Monitoring, QHE, Birmingham
Harvey, L., & Newton, J. (2007). Transforming Quality Evaluation: Moving on, In: Quality
Assurance in Higher Education, D. F. Westerheijden, B. Stensaker & M. J. Rosa (Eds.),
pp. 225-245, Springer, Dordrecht, the Netherlands
Houston, D. (2007). TQM and Higher Education: A Critical Systems Perspective on Fitness
for Purpose. Quality in Higher Education, 13(1), 3-17
Houston, D. (2008). Rethinking Quality and Improvement in Higher Education. Quality
Assurance in Education, 16(1), 61-79
Huang, F. (2005). Quality Enhancement and Quantitative Growth: Changes and Trends of
China's Higher Education. Higher Education Policy, 2005(18), 117-130
Jacques, M. L. (1999). The Call of Quality: Doing Right Things Right. Quality Progress, 32(9),
48-54
King, M., Morison, I., Reed, G., & Stacow, G. (1999). Student Feedback Systems in the
Business School: A Departmental Model. Quality Assurance in Education, 7(2), 90-100
Lewis, D. R., Ikeda, T., & Dundar, H. (2001). On the Use of Performance Indicators in Japans
Higher Education Reform Agenda. Nagoya Journal of Higher Education, 1, 67-98
Li, Y. (2010). Quality Assurance in Chinese Higher Education. Research in Comparative and
International Education, 5(1), 58-76
Towards Learning-Focused Quality Assurance in Chinese Higher Education
181
Li, Y., Li, X., & Qu, Q. (2008). Practice and Study of Chinese Higher Education Teaching Quality
Evaluation, Zhongshan University Press, Guangzhou
Meirovich, G., & Romar, E. J. (2006). The Difficulty in Implementing TQM in Higher
Education Instruction. Quality Assurance in Education, 14(4), 324-337
Middlehurst, R., & Woodhouse, D. (1995). Coherent Systems for External Quality
Assurance. Quality in Higher Education, 1(3), 257-268
Morley, L. (2003). Quality and Power in Higher Education, SRHE & Open University Press,
Maidenhead
Neave, G. (1996). On looking both ways at once: Scrutinies of the private life of higher
education, In: Inside academia. New challenges for the academic profession, P. A. M.
Maassen & F. A. Van Vught (Eds.), De Tijdstroom, Utrecht, the Netherlands
Neave, G. (1998). The Evaluative State Reconsidered. European Journal of Education, 265-284
Reeves, C. A., & Bednar, D. A. (1994). Defining Quality: Alternatives and Implications.
Academy of Management Review, 19(3), 419-445
Rowley, J. (2003). Designing Student Feedback Questionnaires. Quality Assurance in
Education, 11(3), 142-149
Salter, B., & Tapper, T. (2000). The Politics of Governance in Higher Education: The Case of
Quality Assurance. Political Studies, 48(1), 66-87
Shi, H., Liu, X., Chen, W., & Yang, R. (2008). Theory and Practice in Higher Education Teaching
Quality Assurance and Monitoring, Henang University Press, Kaifeng
Stensaker, B. (2003). Trance, Transparency and Transformation: the Impact of External
Quality Monitoring in Higher Education. Quality in Higher Education, 9(2), 151-159
Stensaker, B. (2008). Outcomes of Quality Assurance: A Discussion of Knowledge,
Methodology and Validity. Quality in Higher Education, 14(1), 3-13
Temponi, C. (2005). Continuous Improvement Framework: Implications for Academia.
Quality Assurance in Education, 13(1), 17-36
Thune, C. (1996). The Alliance of Accountability and Improvement: The Danish Experience.
Quality in Higher Education, 2(1), 21-32
Thune, C. (2002). Future Relationships and Dilemmas of Quality Assurance and
Accreditation, Proceedings of the 24th EAIR Annual Forum, Prague, 8-11 September
2002
Ulrich, W. (2001). The Quest for Competence in Systemic Research and Practice. Systems
Research and Behavioural Science, 18(1), 3-28
Van Vught, F. A., & Westerheijden, D. F. (1993). Quality Management and Quality Assurance in
European Higher Education: Methods and Mechanisms, Office for Official Publications
of the Commission of the European Communities, Luxembourg
Vroeijenstijn, A. I. (1995). Improvement and Accountability: Navigating between Scylla and
Charybdis, Guide for External Quality Assessment in Higher Education, Jessica Kingsley,
London
Vroeijenstijn, A. J., & Acherman, J. A. (1990). Control Oriented versus Improvement
Oriented Quality Assessment, In: Peer Review and Performance Indicators: Quality
Assessment in British and Dutch Higher Education, L. C. J. Goedegebuure, P. A. M.
Maassen & D. F. Westerheijden (Eds.), VSNU, Utrecht
Watty, K. (2003). When Will Academics Learn about Quality. Quality in Higher Education,
9(3), 213-221
Quality Assurance and Management
182
Westerheijden, D. F. (2001). Ex oriente lux?: National and Multiple Accreditation in
Europe after the Fall of the Wall and after Bologna. Quality in Higher Education,
7(1), 65-75
Westerheijen, D. F., Hulpiau, V., & Waeytens, K. (2006). Lines of Change in the Discourse of
Quality Assurance: An Overview of Some Studies into What Impacts
Improvements, Proceedings of the 28th Annual EAIR Forum, Rome, 30 August-1
September 2006
Woodhouse, D. (1999). Quality and Quality Assurance, In: Quality and internationalisation in
higher education, H. d. Wit & J. A. Knight (Eds.), pp. 29-44, OECD, Paris, France
10
Quality Assurance in Chiles Municipal Schools:
Facing the Challenge of Assuring
and Improving Quality in Low
Performing Schools
Luis Ahumada*, Carmen Montecinos and Alvaro Gonzlez
Pontificia Universidad Catlica de Valparaso,
School of Psychology
Chile
1. Introduction
This chapter will focus on the issue of quality assurance and improvement in the Chilean
school system, particularly on the challenges faced by public municipal schools in the
context of recent educational reform. Building on previous studies on the implementation of
a quality assurance system in our country, we outline two interdependent ways to approach
this challenge: recognising the schools current characteristics and improvement needs, and
providing appropriate support to build internal capacities for improvement in these schools.
Following the research evidence described in this chapter, suggestions are advanced to
influence education policy regarding quality assurance and improvement issues in Chile.
We propose the need for closer collaboration and joint work among different levels of the
school system (national, municipal and schools), as well as among school stakeholders
(principals, students, teachers, parents) to develop internal and system capacity for assuring
and improving educational quality. Consequently, to assist schools in building the necessary
internal capacity and promote learning and innovation, we highlight the relevance of
distributed leadership amongst school stakeholders and the development of a learning-
oriented culture to facilitate processes of self-evaluation in schools, which in turn would
promote a culture of continuous improvement.
2. Education reform and policy context in Chile
Since the 1980s a market-driven model has operated for the provision of educational
services in Chile. The role of the government has been to subsidise demand as parents
choose among three different types of schools. Municipal schools are administered by the
countrys 341 municipal governments and are totally financed through a per-pupil voucher
system based on student attendance. Private subsidised schools are financed through the
same voucher system and, in most cases, charging parents an additional fee. The third type
*
Corresponding Author
Quality Assurance and Management
184
of schools is private fee-paying schools, which are fully funded by parents. This funding
formula has led to a highly stratified educational system (Donoso & Donoso, 2009). The
Organisation for Economic Cooperation and Development (OECD) wrote that the
educational system in Chile is consciously class structured (OECD, 2004). The report
further states:
The rules of the game are different and unjustly so for municipal and private
schools. Private schools can both select and expel. Municipal schools with the
exception of the few prestigious ones that are in high demand are obliged to accept all
students asking for access. Under these circumstances, results can be expected to differ
in favour of private subsidised schools. (p. 255)
In the case of Chile, research shows that students performance in national examinations is
directly related to their socio-economical status (SES) and the type of school they attend
(McEwan, 2001; Raczynski and Muoz, 2007). This situation illustrates the inequities of the
Chilean educational system (Mizala and Romaguera, 2000). A problem that has been hard to
resolve through initiatives such as programmes of instructional support for
underperforming schools, strengthening of teacher training and assessment, and school
management support programmes (Raczynski & Muoz, 2007). Therefore, demands for
improving quality and equity in the school system have been in the front of the policy
agenda for the last two decades, but with few positive results so far (Donoso & Donoso,
2009; Belle, Contreras, & Valenzuela, 2008; Weinstein & Muoz, 2009).
In an effort to address this situation, the Chilean school system is currently undergoing a
deep transformation, with the passing of several legal initiatives aiming to change its
structure and functioning (Preferential School Subsidy Act, General Act of Education;
National System for Quality Assurance in Education). Weinstein and Muoz (2009) have
noted that the introduction of these new legal frameworks represent a breaking point
because it purports to modify the structure of the school system in order to push changes
that can redress the differences in achievement among municipal public schools, private
subsidised schools and private fee-paying schools (Mizala & Romaguera, 2000). These legal
frameworks constitute reform efforts aimed to ensure a high quality and equitable school
system for all students.
These reforms have influenced primary and secondary education on issues such as finance,
accountability and governance of schools and local administrators (Brunner & Pea, 2007),
setting particular challenges to those low-performing municipal schools in vulnerable
contexts (Sotomayor, 2006). However, these reforms have also safeguarded the
governments role of control and assessment of curricular issues (Muoz & Vanni, 2008).
This is similar to what happens in the rest of the Latin American educational reforms (Ball,
Fischman, & Gvirtz, 2003). According to Ball et al. (2003), education policies in Latin
American countries have been the subject of many processes of centralised decentralisation,
similar to the Chilean case. All of them have followed a similar trend of reform characterised
by a local empowerment style of governance (Glatter, 2002), which emphasises the locality
of decision-making. These policies and strategies have been widely supported by
international multilateral agencies promoting reforms alongside with neoliberal principles
(Ball et al., 2003). Additionally, these policies have promoted quality assurance programmes
as part of reform efforts in Latin American countries, like Chile (Carnoy, 1999).
Quality Assurance in Chiles Municipal Schools:
Facing the Challenge of Assuring and Improving Quality in Low Performing Schools
185
One aspect to consider in any system of quality assurance is the relationship between
quality and equity. Equity refers to fairness in access to educational opportunities so that
resources are distributed in accordance to differential students needs and outcomes do not
depend on students social-cultural characteristics. That is, independent of their family
backgrounds, in an equitable school system all students complete their education with
comparable levels of skills and opportunities to succeed in life (Belfield & Levin, 2002).
Quality without equity becomes a mere compliance with standards without consideration of
the contextual and local aspects mentioned above.
3. Research evidence from the implementation of a quality assurance system
in Chiles municipal schools
Education policy demands the various stakeholders at the national level to take for not only
monitoring commitment with established goals and the use of resources, but also to
promote the coordination of necessary networks to enable each school to decide and
systematically develop efforts to improve and deliver a quality service (MINEDUC, 2005).
As new quality assurance systems will be required for Chilean schools, it may be useful to
examine lessons learned from a prior quality assurance policy.
The System for Quality Assurance of School Management (SACGE) was implemented
between 2003 and 2007 and consisted of an integrated model of four key areas of processes
and one area of results. The system promoted a cycle of continuous improvement based on
four phases: institutional self-evaluation, external review, school improvement plan and
public account (MINEDUC, 2005).
Our research group conducted a study between 2006 and 2008 in order to analyse the
influence of SACGE in schools and their leadership teams performance. Through a mix-
methods approach data collected in six schools, showed that, although all schools evidenced
important changes in their practices, not all schools managed to assure quality and develop
a culture of continuous improvement (Ahumada, Galdames, Gonzlez, & Herrera, 2009).
The results also revealed several difficulties in the implementation of SACGE (i.e.
inadequate training; contradictory information; inconsistent support from local
administrators), which in turn hindered the possibility for schools and their school leaders
to engage and commit to a process of improvement.
The quality model underpinning SACGE as an assurance system is not prescriptive. It
recognizes, values and promotes diversity of schools and it assumes that the
implementation of each phase ought to consider the context, particularly the schools culture
and history (MINEDUC, 2005). Planning for improvement is one of the most important
aspects that SACGE promotes, giving schools the autonomy to identify and define the
appropriate management practices for their context and needs. School leaders (principal and
management team) are responsible for giving viability to the planned actions. Moreover,
SACGE aims to promote continuous improvement in schools, specifically, it seeks to
improve the quality of management processes, students learning (scores on national
achievement tests) and the satisfaction of the community. Thus, SACGE invites schools and
school stakeholders to take responsibility for the results that the proposed improvement
plan aims for and is capable of achieving.
Quality Assurance and Management
186
In short, SACGE aims to promote responsibility in principals and their management teams
to conduct a systematic review and ongoing development of management processes and
outcomes, developing a learning-oriented culture of continuous improvement which
involves various school stakeholders. The community the school serves should be part of
the decision-making processes as schools and districts define how educational quality will
be attained and measured.
4. SACGEs four phases for quality assurance
As described above, SACGE considers four phases for quality assurance in schools:
institutional self-evaluation, external review, school improvement plan and public
accountability. The institutional self-evaluation phase aims to produce base-line information
about the schools management process and results to determine the quality of its daily
educational practices and identify those areas that could be improved (MINEDUC, 2005).
Research on institutional self-evaluation (Navarro & Jimnez, 2005; Soto, 2006), indicates
that the process of self-evaluation facilitates the awareness of the prevailing leadership style
in the organization, the characteristics of the organizational culture and the degree of
satisfaction of teachers and school leaders. Navarro and Jimenez (2005) note that to
maximize the positive effects of the self-evaluation, it requires prior development of
teamwork skills, with strong emphasis on participative management. Soto (2006), however,
points out that many principals have an individual conception of the self-evaluation
process, which contrasts with the theoretical foundations that foster collaborative work. In
this sense, research evidence highlights the need for the principal and his team to assume
accountability for the evaluation of educational processes and outcomes (Westhuizen van
der, Mosoge, Swanepoel, & Coetsee, 2005), which would facilitate the implementation of a
quality-oriented school culture (Cano, 2003; Casanova, 2004).
In a study about the functioning of schools management team during the implementation
of SACGE in ten primary and secondary public municipal schools conducted by our
research team, we evidenced four factors that accounted for a good teamwork: trust, sense-
making, efficiency and effectiveness, and ineffectiveness (Ahumada, Montecinos & Sisto,
2008). Trust appears to be the key factor in determining a well-functioning team. In schools
with a higher level of trust, people felt very comfortable working together, supported each
other strongly and had great appreciation for the work they did. Furthermore, they were
willing to share and to listen to other members ideas freely and there was a strong
identification with the team and the school.
Management teams, whose functioning was of higher quality, were able to initiate the self-
evaluation phase with a clear idea of the workload involved and how it should be managed.
In the case of teams whose functioning was of lower or poor quality, they exhibited
problems organising and delegating tasks, such as collecting data, interpreting evidence and
managing small groups of teachers. It is worth noting that in these cases teachers
participation was instrumental and limited only to data collection (Ahumada, Galdames,
Gonzalez & Herrera, 2009).
Building a shared meaning and direction was another important factor that affected the
functioning of these schools management teams. In those teams with a higher quality
Quality Assurance in Chiles Municipal Schools:
Facing the Challenge of Assuring and Improving Quality in Low Performing Schools
187
functioning there were systematic conversations about the schools vision and how to
achieve it. According to our research, most management teams faced the self-evaluation
phase without delving into the challenges of developing a process such as this one.
However, during the implementation of the self-evaluation phase, some teams were able to
develop a shared vision about the challenging and meaningful work they had to do in this
phase (Ahumada, Galdames, Gonzalez & Herrera, 2009).
During the self-evaluation phase, some aspects related to the construction of meaning and
the process for organizing this task emerged, as well as specific aspects associated with
organizational learning and the journey of continuous school improvement (Collison &
Cook, 2007; Hallinger & Heck, 2011; Weick, Sutcliffe & Obstfeld, 200). However, these
aspects were seldom capitalized as time became a scarce resource for the management team
and for the teachers engaged in this self-evaluation. These actors lacked the time to reflect
on the aim and importance of self-evaluation. Moreover, in many schools it was perceived
as an externally imposed task (Ahumada, Galdames, Gonzalez & Herrera, 2009).
The management teams that spent more time and resources to identify problems and found
ways to solve them were the same ones that stood out for their internal relationships of trust
and mutual knowledge about its members capacity. These teams, whose functioning was of
higher quality, saw self-evaluation as worthwhile and constantly monitored their work,
developing strategies to deal with data collection and analysis. In several of these teams,
these changes meant redistributing the work schedule, and in some cases, deferring or
eliminating other activities; even increasing the number of hours they worked. One of the
consequences of these strategies was that some management teams improved their
relationship with the rest of the school members, especially with teachers. By contrast, in
teams with poor or lower functioning quality the self-evaluation process created a distance
between the management team and teachers, negatively affecting the climate within the
school (Ahumada, Galdames, Gonzalez & Herrera, 2009).
The second phase, external review, intended to validate the institutional self-evaluation. For
the Ministry of Education, the aim of the external evaluation should be providing objective
information to the school about their self-evaluation, as a way of contributing to their
improvement process (MINEDUC, 2005). This external evaluation was led by a team of
professionals External Panel- who did not belong to the school, but were related to it in
their capacity as ministry supervisors or municipal officers. Research evidence indicates that
the usefulness of the external evaluation will depend on how the school will assume this
instance to generate a learning process, and to ensure commitment and participation of all of
the members of the school community (Muijs, Harris, Chapman, Stoll & Russ, 2004).
The External Panel's visit to the school marked a turning point in the process. In general,
management teams, due to coordination and relationship problems with the Panel
members, developed a negative opinion of this phase. These negative perceptions translated
into the idea that SACGE was one of the many ill-implemented and abruptly replaced
programs that the Ministry of Education has imposed to schools (Ahumada, Galdames,
Gonzlez & Herrera, 2009). This finding was reported for schools that had high functioning
as well as low functioning management teams.
The following phase, developing and implementing an Improvement Plan, consists of
designing, implementing and evaluating actions that will generate changes in the schools
Quality Assurance and Management
188
management or will improve management practices already in place. Thus, the school
quality improvement model puts the focus on the schools and its communitys capacity
manage change (Fullan 1999, Canton, 2004). This would involve the establishment of a
culture oriented to foster organizational learning and continuous improvement (Stoll, 2009;
Voulalas & Sharpe, 2005; Martinez, 2007).
Finally, the Public Accountability phase asks the principal to share, with the community, the
schools outcomes and progress on matters related to the quality of teaching, learning and
management processes. The literature has emphasized the importance of schools
responsibility for reporting back to the community their results (Earl, 2004; Glatter, 2002). In
this phase, the goal is to promote accountability, seek transparency and facilitate access to
the results and management processes to the school community (Marks & Nance, 2007;
Ryan, 2005; Schweigert, 2006). However, accountability not only implies to give an account
but also to take responsibility for appropriately representing the rights and needs of the
community. From this point of view, accountability means building with the community a
series of performance indicators that are relevant to them and the school, being part of their
success. Accountability as a concept is more about performance than a mere democratic
control of processes and outcomes that must be present at school (Anderson, 2009).
5. Discussion and conclusions
The study suggested that systems like SACGE should consider a differentiated approach to
quality assurance (compare the schools performance against a standard) and to quality
improvement (review of schools processes to influence their performance). From this
perspective, it is important to consider schools entry characteristics or base line regarding
their school management processes and results, as well as characteristics of the leadership
team in charge of this process (Ahumada, Montecinos, & Sisto, 2008). In this regard, findings
from our studies indicate the importance of distributed leadership. This leadership is not just
that exercised by the principal, as transformational or instructional, but one in which various
members of the school community feel responsible for significant improvements in processes
and outcomes. As Anderson (2009) points out, it involves leadership exercised by all actors in
the school community, ensuring the rights of children who are served by the school.
The concept of distributed leadership is understood here as the one that emerges from
everyday actions, involving people responsible for tasks related to the design and
implementation of the improvement plan. In our view, this is particularly interesting for
understanding the ways of organising work as well as the social relationships involved in
performing the tasks entailed in a quality assurance system such as SACGE. On the other
hand, distributed leadership is concerned with the contextual variables associated with
performing this task, and it seems particularly important to strengthen schools internal
capacity for organizational learning, understood at the individual, team and organizational
levels.
We have learned from our research that, for a quality assurance system to be effective, it
requires: a culture that facilitates learning, teamwork and strategic clarity where members of
the organization share the organizational mission and goals. Strategic clarity must be
reflected in the schools strategic orientations and should guide the development and
implementation of the Improvement Plan. In summary, we believe that both the distributed
Quality Assurance in Chiles Municipal Schools:
Facing the Challenge of Assuring and Improving Quality in Low Performing Schools
189
leadership and organizational learning at different levels are central to the current
educational reform that seeks to generate a change in the management of educational
institutions.
Based on the differences observed between low and high functioning leadership teams, we
conclude that capacity building for school improvement is one of the necessary aspects to
consider when developing a policy for quality assurance. There are certain skills that should
be installed in the educational communities in order to achieve autonomy for improvement:
data-driven decision making, distributed leadership, communication and transparency
between stakeholders, ability to innovate, to generate new practices and a participatory
culture, are just a few.
International research evidence is consistent with our findings regarding the importance of
identifying internal characteristics of schools for assuring and improving school quality
(Anderson, Leithwood, & Strauss, 2010; Leithwood & Louis, 1998; Scribner, Cockrell,
Cockrell, & Valentine, 1999; Stoll, 2009). Collectively, these studies have noted that building
internal capacities for data based decision- making, distributed leadership and
organizational learning are critical for initiating and sustaining processes for quality
assurance and improvement in schools.
To develop these skills it is necessary to articulate the different levels at which a policy for
quality assurance and quality improvement is designed and implemented. Greater
coordination is necessary among the central (Ministry of Education), intermediate (regional
ministry and municipal administrators) and local level (primary and secondary schools). A
joint effort among the various stakeholders that make-up the school organization
(administrators, students, teachers, and parents) is crucial to achieving a quality education.
Quality and equity in education is not a problem that can be resolved at the school level;
political and social organizations linked to education must also join in this effort.
Regarding the definition of good quality, it is important to consider the interaction
between internal and external contextual environments. According to Tikly (2011) there are
three overlapping contextual environments that define what good quality education means:
policy, school and home/community. The author states that creating a good quality
education involves paying attention to the interface between each environment (Tikly, 2011,
p.11). In other words, considering the external policy demands, internal capacities of the
school and the social and intellectual capital of the community.
The interplay among these factors as well as the schools base line, creates particular
configurations cautioning against the one size fits all approach to quality assurance and
improvement initiatives (Barrett, Chawla-Duggan, Lowe, Nikel, & Ukpo, 2008; Sayed &
Ahmed, 2011). The same goes for the external support that might be provided to low-
performing schools, as the literature advises against transferring what works in some
school contexts to a different one (Harris & Bennett, 2001).
According to findings from our studies, the school principal and his/her management team,
in conjunction with all schools stakeholders, must work to develop a learning-oriented
organizational culture that engages in a continuous improvement of its processes and
outcomes. This is certainly hard work that can be facilitated to the extent that there is a
shared understanding of where the school stands on the indicators for educational quality
and the capacities that need to be developed in order to improve.
Quality Assurance and Management
190
6. Acknowledgments
This manuscript was funded by a grant from the Chilean National Fund for Scientific and
Technological Development (Fondecyt # 1090570) and by the Centre for Advanced Research
in Education (PIA-CONICYT Project CIE-05).
7. References
Ahumada, L., Galdames, S., Gonzlez, A., & Herrera, P. (2009). El funcionamiento del
equipo directivo durante un proceso de autoevaluacin institucional en el marco de
polticas de aseguramiento de la calidad de la gestin escolar en Chile. Universitas
Psychologica, 8 (2), 353-370.
Ahumada, L., Montecinos, C., & Sisto, V. (2008). Desarrollo y Validacin de una Escala para
Evaluar el Funcionamiento del Equipo Directivo en los Centros Educativos. Revista
Interamericana de Psicologa / Interamerican Journal of Psychology, 42 (2), 228-235.
Anderson, G. (2009). Advocacy Leadership: toward a post-reform agenda in education. New York:
Routledge.
Anderson, S., Leithwood, K., & Strauss, T. (2010). Leading Data Use in Schools:
Organizational Conditions and Practices at the School and District Levels.
Leadership and Policy in Schools, 9 (3), 292 - 327.
Ball, S. J., Fischman, G., & Gvirtz, S. (2003). Crisis and hope: the educational hopscotch of Latin
America. London, New York: Routledge Falmer.
Barrett, A. M., Chawla-Duggan, R., Lowe, J., Nikel, J., & Ukpo, E. (2008). The concept of
quality in education: A review of the international literature on the concept of
quality in education. EdQual Working Paper, 3.
Belfield, C. R., & Levin, H. M. (2002). Educational Privatization: Causes, Consequences, and
Planning Implications. Fundamentals of Educational Planning, 74. Paris: UNESCO.
Belle, C., Contreras, D. and Valenzuela, J. P. (2008). La agenda pendiente en Educacin.
Profesores, administradores y recursos: propuestas para la nueva arquitectura de la
educacin chilena. Santiago: Universidad de Chile / UNICEF.
Brunner, J. J., & Pea, C. (Eds.). (2007). Reforma Educativa: Aportes para el debate. Santiago:
Universidad Diego Portales.
Cano, E. (2003). Organizacin, calidad y diversidad. Madrid: La Muralla.
Casanova, M. A. (2004). Evaluacin y calidad de centros educativos. Madrid: La Muralla.
Carnoy, M. (1999). Globalization and Educational Reform: what planners need to know. In
IIPE (Ed.) Fundamentals of Educational Planning. Paris, France: UNESCO.
Collison, V., & Cook, T. (2007). Organizational learning. USA: Sage Publications.
Donoso, S., & Donoso, G. (2009). Polticas de gestin de la educacin pblica escolar en
Chile (1990 -2010): una evaluacin inicial. Ensaio: Avaliao e Polticas Pblicas em
Educao, 17, 421-448.
Earl, L. M. (2004). Measuring effectiveness and improvement in schools: why accountability is not
about painting by numbers. Victoria: Jolimont.
Fullan, M. (1999). Change Forces. Philadelphia: Falmer Press.
Glatter, R. (2002). Governance, Autonomy and Accountability in Education. In T. Bush & L.
Bell (Eds.) The Principles and Practice of Educational Management. London: Sage.
Quality Assurance in Chiles Municipal Schools:
Facing the Challenge of Assuring and Improving Quality in Low Performing Schools
191
Hallinger, P., & Heck, R. H. (2011). Exploring the journey of school improvement: classifying
and analyzing patterns of change in school improvement processes and learning
outcomes. School Effectiveness and School Improvement: An International Journal of
Research, Policy and Practice, 22 (1), 1 - 27.
Harris, A., & Bennett, N. (2001). School effectiveness and school improvement: alternative
perspectives. London: Continuum.
Leithwood, K. A., & Louis, K. S. (1998). Organizational learning in schools. Lisse, Netherlands ;
Abingdon: Swets & Zeitlinger.
Marks, E. M. & Nance, J. P. (2007). Contexts of accountability under systemic reform:
Implications for principal influence on instruction and supervision. Educational
Administration Quarterly, 43, 3-37.
Martnez, E. (2007). La significacin en la cultura: concepto base para el aprendizaje
organizacional. Universitas Psychologica, 6 (1), 155-162.
McEwan, P. J. (2001). The Effectiveness of Public, Catholic, and Non-Religious Private
Schools in Chile's Voucher System. Education Economics, 9 (2), 103 - 128.
MINEDUC. (2005). Sistema de Aseguramiento de la Calidad de la Gestin Escolar: Calidad en todas
las Escuelas y Liceos. Santiago: Ministerio de Educacin de Chile.
Mizala, A., & Romaguera, P. (2000). School Performance and Choice: The Chilean
Experience. The Journal of Human Resources, 35 (2), 392-417.
Muijs, D., Harris, A., Chapman, C., Stoll, L., & Russ, J. (2004). Improving Schools in
Socioeconomically Disadvantaged Areas -A Review of Research Evidence. School
Effectiveness and School Improvement, 15 (2), 149-175.
Muoz, G., & Vanni, X. (2008). Rol del Estado y de los Agentes Externos en el Mejoramiento
de las Escuelas: Anlisis entorno a la Experiencia Chilena. Revista Iberoamericana
sobre Calidad, Eficacia y Cambio en Educacin, 6 (4), 47-68.
Navarro, G. & Jimnez, J. (2005). La Autoevaluacin Escolar y su impacto en el
comportamiento docente, individual y grupal, en la organizacin educativa.
Estudios Pedaggicos, 31 (2), 57-69.
OECD (2004). Revisin de polticas nacionales de educacin: Chile. [Reviews of national policies
for education: Chile]. Paris: Organisation for Economic Cooperation and
Development.
Raczynski, D., & Muoz, G. (2007). The Chilean Educational Reform: The Intrincate Balance
between a Macro and Micro Policy International Handbook of Urban Education 19,
641-664. Netherlands: Springer.
Ryan, K. E. (2005). Making educational accountability more democratic. American Journal of
Evaluation, 26 (4), 532-543.
Sayed, Y., & Ahmed, R. (2011). Education quality in post-apartheid South African policy:
balancing equity, diversity, rights and participation. Comparative Education, 47 (1),
103 - 118.
Scribner, J. P., Cockrell, K. S., Cockrell, D. H., & Valentine, J. W. (1999). Creating Professional
Communities in Schools through Organizational Learning: An Evaluation of a
School Improvement Process. Educational Administration Quarterly, 35 (1), 130-160.
Soto, M. (2006). Percepcin directiva y autoevaluacin institucional: el caso de la educacin
municipalizada en la provincia de Concepcin. Ciencias Sociales Online, 3 (3), 56-70.
Quality Assurance and Management
192
Sotomayor, C. (2006). Programas pblicos de mejoramiento de la calidad de escuelas bsicas
en contextos urbanos vulnerables: evolucin y aprendizajes de sus estrategias de
intervencin (1990 -2005). Pensamiento Educativo, 39 (2), 255-271.
Stoll, L. (2009). Capacity building for school improvement or building capacity for learning?
A changing landscape. Journal of Educational Change, 10, 115-127.
Schweigert, F. J. (2006). The meaning of effectiveness in assessing community initiatives.
American Journal of Evaluation, 27 (4), 416-436.
Tikly, L. (2011). Towards a framework for researching the quality of education in low-
income countries. Comparative Education, 47 (1), 1 - 23.
Voulalas, Z. & Sharpe, F. (2005). Creating schools as learning communities: Obstacles and
processes. Journal of Educational Administration, 43 (2/3), 187-208.
Weick, K., Sutcliffe, K. & Obstfeld, D. (2005). Organizing and the process of sensemaking.
Organization Science, 16 (4), 409-421.
Weinstein, J., & Muoz, G. (2009). La Reforma Educacional en el punto de Quiebre. In C.
Bascun, G. Correa, J. Maldonado & V. Snchez (Eds.), Ms ac de los sueos, ms
all de lo posible. La Concertacin en Chile. Santiago, Chile: LOM.
Westhuizen van der, P., Mosoge, M., Swanepoel, L. & Coetsee, L. (2005). Organizational
Culture and Academic Achievement in Secondary Schools. Education and Urban
Society, 38 (1), 89-109.
11
Integrated Higher Education Management:
Summary of Management Approaches
Juha Kettunen
Turku University of Applied Sciences, Turku,
Finland
1. Introduction
The great challenge of autonomous higher education institutions is to create and describe
their quality assurance systems, which may be based on old traditions and various
management approaches. The existing and emerging management approaches have
different backgrounds. Therefore, they have to be integrated with each other so that they
support each other and ensure that higher education institutions can attain their objectives.
Strategic management and quality assurance are the main management theories, and they
include many minor approaches and concepts. Each institution has a challenge to put these
approaches together and integrate them as a management system of the institution
(Kettunen & Kantola, 2007).
Strategic plans include strategic themes and objectives, which describe the route from the
perceived present situation to the desired future (Kettunen, 2010b). Higher education
institutions which are able to take personnel, students and other stakeholders into account
in future planning are able to build understanding and commitment to the strategic plan.
Strategic planning is no longer a compliance task of the top-management making sure
that the regulatory and statutory requirements are met. The new information technology
provides means to have dialogue and enables the most important stakeholders to engage
in the strategy process. The higher education institution should be able to describe its
strategic plan using a strategy map, which describes the strategic objectives in the
perspectives of the customer, finance, internal processes and organisational learning
(Kettunen, 2004).
Quality assurance has developed independently from strategic management and it
emphasizes the different aspects of management. Even though these management
approaches have different backgrounds, they can be integrated into the management system
supported by the management information system (Kettunen & Kantola, 2005). The quality
assurance system supplements strategic management, because the purpose of quality
assurance is to ensure that the institution can achieve its strategic and other objectives. The
success of the institution in reaching its strategic objectives can be measured using the
indicators of the Balanced Scorecard. Autonomous higher education institutions plan and
build their own quality assurance systems and each institution should be able to describe
the main elements of the quality assurance system in an understandable way.
Quality Assurance and Management
194
The purpose of this chapter is to summarise strategic management, quality assurance and
other management approaches, and create the conceptual framework of integrated higher
education management. The study explains the importance of dialogue in the strategy
process to engage academic people in future planning and definition of the pedagogical
profile of the institution, which can be defined in the strategy process. Then the study
explains the internal and external evaluation of educational units, which are processes to
enhance quality and pedagogical development. The study also explains the internal and
external quality audits of processes.
This study is organised as follows. Section 2 explains the strategy and quality maps
developed to describe the strategic plan and the quality assurance system of a higher
education institution. Section 3 describes the strategy process which has turned to a new era,
because Web-based dialogue enables the personnel, students and other stakeholders to
engage in the strategy process. Section 4 presents the role of pedagogy in quality assurance
and presents innovation pedagogy adopted for the profile at the Turku University of
Applied Sciences. Thereafter, Section 5 presents the internal benchmarking of degree
programmes as the procedure of quality assurance. Section 6 presents the external
evaluation of the centres of excellence. Section 7 presents process management as a means to
ensure the achievement of objectives and the continuous improvement of high quality
processes. Process management also is an important approach for the information systems
to ensure high quality. Section 8 presents the conceptual framework of integrated higher
education management. Finally, the results of the study are discussed and summarised in
the concluding section.
2. Strategy and quality maps create the framework
Higher education institutions are accountable for their performance not only for those
bodies that finance education, but also students, employers and other stakeholders. These
institutions are responsible to implement the education policy, their own strategic objectives
and quality assurance, and they are obliged to participate in external evaluations and audit
their quality assurance systems. Accountability means that the institutions have the
responsibility to build their own quality assurance systems. They need a conceptual
framework for the integration of a strategic plan and quality assurance, which can be
tailored to meet the needs of the institution. The strategy and quality maps are means to
describe the integration of strategic management and quality assurance in higher education
(Kettunen, 2011c).
The purpose of the quality assurance system is to ensure that the strategic and other
objectives can be achieved. Therefore, the management of higher education institutions
should have a clear understanding how quality assurance is related to strategic
management. The managers need concepts to describe quality assurance, strategic
management and main processes. The managers also should have a precise understanding
about how the institution can reach its goals with the processes. Strategy and quality maps,
which are like road maps, are the needed concepts. They describe the main land marks on
the route to the desired future situation illustrated by the vision, but omit all the minor
details of specific considerations.
Integrated Higher Education Management: Summary of Management Approaches
195
The internal processes can be described at the institutional level by the value chain, which is
a broad description of the sequential processes. The main elements are research and
development representing knowledge acquisition, support services representing knowledge
management and education representing knowledge dissemination, as noted by Lee and
Yang (2000). The quality cycle of continuous improvement (Deming, 1986; Tague, 2005) can
be combined with the main processes of education. Support services represent the plan
phase and education represents the do phase. Students, employers and other stakeholders
give feedback in the check phase and finally the processes are improved by research and
development in the act phase.
At the plan phase, the objectives of education are planned and defined in the curricula and
other planning documents, and the processes are inspected if necessary. The plans then are
implemented following the process descriptions. The third phase includes the evaluation of
processes, objectives achieved and quality deviations based on feedback from students and
other stakeholders. Corrective actions are taken if non-conformance is detected. In the final
phase, the process descriptions and activities are improved. The procedure of the quality
audit is essential to maintain and continuously improve the processes.
The strategy map introduced by Kaplan and Norton (1996, 2004) can be used to describe and
communicate the strategic plan of the institution. The strategy map describes the strategic
objectives and balances them into four perspectives, which typically are the customer,
finance, internal processes and organisational learning. The strategy map also describes the
linkages between the strategic objectives. The internal processes perspective describes the
main processes of an institution, which are research and development, support services and
education. Typically, the linkages between the perspectives are described in higher
education so that the financing and organisational learning is required for the internal
processes, which achieve customer satisfaction.
The quality map is the graphical representation of the quality assurance system. The quality
map helps the management of the institution describe the main characteristics of quality
assurance. The global environment, national education policy and regional aspects are taken
into account in strategic planning, which defines the strategic objectives. The quality
assurance system ensures that the strategic objectives can be achieved. The management of
the higher education institution takes responsibility to develop internal processes based on
the strategic plan and the feedback from students and customers. The support services of
the faculty define the learning objectives and develop curricula. The faculty implements the
plan in the education process and collects feedback from students and customers.
Strategic management and quality assurance are different approaches of management,
because they have been developed independently of each other. They can, however, be
integrated with each other. The strategy process has a forward-looking stance and it
produces the strategic objectives, but the purpose of the quality assurance system is to
ensure that strategic objectives can be reached. Strategy and quality maps describe the
essential characteristics of the management approaches. The strategy process is partly in the
quality assurance system, because it produces the important strategic objectives. On the
other hand, continuous improvement is a common element in both the strategy and quality
maps.
Quality Assurance and Management
196
3. Strategy process as a dialogue to achieve commitment
Strategic management adapts to a rapidly changing environment and provides the strategic
themes and objectives for the desired future. Autonomy of higher education means that
academic people have the power to subvert, constrain or ignore changes they do not accept.
Therefore, it is extremely important to engage them in the strategy process. This process has
turned to a new phase which enables the personnel, students and other stakeholders to
engage in it. The Web-based dialogue enables management to collect ideas, to conduct a
content analysis and transform a large amount of data into strategic themes and objectives
even in large organisations (Kettunen, 2010b).
The strategy process typically starts with environmental scanning. The environment of
higher education institutions includes education policy, networked strategies and local
demand for labour among the other things. The strengths and weaknesses of the institution
are analysed taking into account the opportunities and threats of the environment. The new
age of environmental scanning extends the traditional environmental analysis of strategic
planning with the Web-based dialogue (Ilmola & Kotsalo-Mustonen, 2003; Kettunen, 2010b).
The dialogue in the strategy process is more important than the written document, because
participation in the process supports the commitment to the strategic plan. On the other
hand, the environmental analysis is related to the fulfilment of customers requirements,
needs or desires following the fitness-for-purpose principle (Welch & Dey, 2002).
A Web-based dialogue can be designed to collect, evaluate and analyse signals form
personnel, students and partners to pass the surveillance, mentality and power filters
(Ansoff, 1984). The surveillance filter blocks the information out of the sight and scope of an
individual. The mentality filter limits the information to seeing only the short-sighted
changes in time. The power filter blocks information from other organisational levels and
cultures. The Web-based survey is used to identify especially the opportunities and threats
of the institution. The respondents of the survey are able to evaluate the ideas presented by
other people and present new ones.
The Web-based survey provides background information for the face-to-face dialogue. The
managers of each organisational unit should analyse and discuss the results of the Web-
based dialogue. The results of the strategy processes are collected in the strategic plan,
which describes the strategic themes and objectives. The strategic plan is implemented using
the annual action plans, the human resources plans, the budgets and other plans. The
Balanced Scorecard introduced by Kaplan and Norton (1996, 2004) is an approach which is
used to measure the achievement of strategic objectives.
The environment is the common element for strategic planning and quality assurance. The
fitness-for-purpose principle of quality assurance and environmental scanning of strategic
planning are similar. Strategic planning describes the route to the desired better future, but
quality assurance ensures that the desired outcome described by the vision can be reached.
It can be concluded that quality assurance complements strategic management and provides
tools for implementation of the strategic management. Even though the Balanced Scorecard
approach has been developed in the context of strategic management, it also is suitable for
quality assurance.
Integrated Higher Education Management: Summary of Management Approaches
197
4. Innovation pedagogy as a profile of a higher education institution
Higher education institutions are not equal, because they have different profiles. That is
especially true in countries which do not have common and strong education policies.
Higher education institutions define their profiles to differentiate themselves, create
competitive advantage and increase their external impact on their environment. If the
education policy and the strategic plans differ among institutions, the quality assurance
systems are hardly identical. The Finnish Ministry of Education and Culture asked the
higher education institutions to define their profiles in 2009.
Many traditional research universities rely on individual-centred learning. Students listen to
lectures, read literature and memorise material for examinations. Individual learning is
relevant when the purpose is to disseminate facts, concepts and information. Although
individual-centred learning has attracted attention previously, such systems often place an
unusual cognitive burden on the learner in social situations and networks. Working life does
not function so that people memorise things alone, but rather ask help from other people.
Individual learning is necessary but not sufficient in situations in which the purpose is to
create capabilities for students to have a positive impact in their working life.
The Finnish universities of applied sciences are part of a wider community and their
regional development has a prominent role based on the legislation. Sociocultural theory
and the constructivist view of learning developed by Vygotsky (1978) and Piaget (1999) are
widely accepted pedagogical starting points at these institutions. Collaborative learning
assumes that learning takes place as learners interact. Individual-centred learning found at
traditional research universities is extended to group-based learning at the universities of
applied sciences. It is relevant to the relatively complex and multidisciplinary problem-
solving tasks of applied research and development, where students participate and create
capabilities for working life. Collaborative learning takes place, for example, in reflection,
negotiation, debating or multidisciplinary study groups.
Networked learning takes place when students are connected to their potential employers
and the partners of the institution. This is relevant in professional higher education, where
internships, applied research and development and theses are carried out with working life.
Internships take at least half a year at the Finnish universities of applied sciences.
Networked learning using information and communication technology supports learning
with regard to the development of searching, evaluating and understanding information
sources, which are necessary skills of scientific inquiry. High learning outcomes need
metacognitive skills and abilities to regulate the learning.
The Turku University of Applied Sciences defined its profile as innovation pedagogy based
on multi-field activities, where entrepreneurship, applied research and development, and
internalisation combine with education to promote innovations in its region (Kettunen,
2011b). Innovation pedagogy provides a pedagogical framework to enhance the quality on
the institutional level. The elements of innovation pedagogy can be found in the Act of the
Universities of Applied Sciences and the learning practices. Therefore, innovation pedagogy
is suitable for all the universities of applied sciences.
The concept of innovation pedagogy includes all the most important elements of the
universities of applied sciences and is especially suitable for those institutions that want to
Quality Assurance and Management
198
increase their external impact on the region and promote innovations. According to
literature, innovations are incremental or radical (Tidd et al., 2001; Bessant et al., 2005). The
incremental innovations are improvements of existing products, services and processes.
Actually, the incremental innovation is a similar concept to the continuous improvement of
quality assurance. The radical innovations correspond to the major strategic changes among
the new products, services and processes. Radical innovations among the processes mean
the reengineering of processes described by Hammer and Champy (1993).
The profile is specified by the focal areas of knowledge at the institution. The research and
development programmes are based on the focal areas of faculties, including applied
information and communication technology, biocompetence and business know-how,
expertise in health care and medication, lifelong well-being services, marine environment
and construction expertise and working life-based approaches to creative arts. The
institution and faculties allocate financial resources to these focal areas. In addition, external
funding is sought to supplement internal funding.
5. Internal benchmarking of degree programmes
The quality assurance system includes, among other things, the evaluation of degree
programmes or subjects. In many countries, subject benchmarking is a systematic procedure
to evaluate education and academic standards (Haargeaves & Christou, 2002; Yorke, 2002).
The procedure of benchmarking for seeing and accepting improvement is a useful tool to
avoid the prevailing opposition to change (Calabrese, 2003; Ford & Ford, 2002).
Benchmarking is especially useful in enhancement-led evaluation, which aims to improve
the activities for better quality.
Benchmarking also is a useful procedure for learning good practices and accepting the
necessary changes to develop education and other activities, and it actually is the
comparison of activities. At the same time, it is hoped that the comparison leads to
enhancement-led evaluation, which aims to support the improvement of activities for better
quality. Traditionally, the emphasis has been on the careful selection of benchmarks that
represent the best practices. However, the selection of a benchmarking team often is a
neglected feature of benchmarking.
Benchmarking includes the search for benchmarks and best, or at least good, practices. The
search for benchmarks is close to quantitative research and typically the comparison of
indicators, which measure the achievement of strategic objectives. The Balance Scorecard
approach is a valuable framework, which can be used in the context of benchmarking taking
into account that the profiles and strategic objectives of the institutions usually are different.
The search for best or good practices is the other line of evaluation. Both of these lines aim
for the continuous improvement of education. When two organisational units are compared,
the underlying assumption of benchmarks and best practices is that these units have
comparable learning objectives based on similar strategic objectives.
The process of benchmarking includes the formation of an evaluation team, the nomination
of a chairman and the selection of the evaluated unit. The evaluated unit is informed to
write the self-evaluation report, which the evaluation team analyses and prepares the
evaluation visit. The evaluation team analyses the statistical data and self-evaluation report
Integrated Higher Education Management: Summary of Management Approaches
199
and visits the evaluated unit. During the visit, the evaluation team analyses continuous
improvement and how the unit has succeeded in its activities. The evaluation visit includes
separate interviews of the management, teachers, students and the advisory board,
including representatives from working life. The dissemination of evaluation results
includes the seminar and the publication.
If the members of the evaluation team are selected from the same degree programme or
subject, they are competent to evaluate the learning objectives, contents and methods. If they
are selected from other domestic or foreign institutions, they are able to make sound
comparisons about the networked collaboration and international exchange from a larger
perspective. If the members of the evaluation team are selected from other degree
programmes, subjects, units or institutions, the strength of that cross functional evaluation
team is in the sound comparison of learning methods, the processes of education and
innovative collaboration among the degree programmes, units or institutions. This kind of
cross-evaluation favours the multidisciplinary activities and innovations and meets the
needs of customers supporting the research and development (Kettunen, 2010a).
The weakness of the international evaluation is the lack of knowledge of the education
system of the country where the evaluation is carried out. That may lead to
misunderstanding and incorrect evaluation. Even though a member of the evaluation team
is from the home country, the evaluation teams knowledge is limited. If the evaluation team
suggests good practices from other countries, they are not necessarily useful, because the
education policy, educational systems and traditions of the different countries are not equal.
Other problems are the culture and language, which do not help the evaluators to
understand all the details of higher education.
The internal benchmarking of a degree programme is an important step in the long-lasting
development of education. The benchmarking produces recommendations included in the
evaluation report. The degree programme takes responsibility to plan these
recommendations for development steps included in the annual action plan. Educational
development usually takes many years until it is implemented in the classroom practices.
The internal benchmarking can be followed in the external evaluation, which may take the
form of centres of excellence.
6. External evaluation of the centres of excellence
The evaluation of the centres of excellence is the procedure of the quality assurance agency
to enhance the quality of education at higher education institutions. The evaluation is
targeted in teaching processes and outcomes that the institution has achieved. The
evaluation encourages the institution and its organisational units to improve the quality and
effectiveness of education. The evaluation encourages educational units to the long-term
development of education, networking and collaboration. The evaluation provides
information on pedagogical decisions, which is important in the evaluation of educational
quality (Kettunen, 2011a).
The Finnish Higher Education Evaluation Council is a national quality assurance agency
which has the responsibility of evaluating candidates for the centres of excellence in higher
education. The evaluation of the centres of excellence is targeted to the evaluation of the
Quality Assurance and Management
200
operation and outcomes of education. The evaluation supplements the quality audits, where
the quality assurance system is the object of evaluation. The quality assurance agency also
has other types of evaluations, which have been targeted for thematic purposes.
The evaluation target operation includes the description of the education unit and
linkages with the strategic plan and pedagogical outlines of the institution containing the
core competence, collaboration with working life, networking within and outside the
institution, the integration of education with research and development and the planning,
operation, evaluation and development of the education unit. In addition, the description of
the operation includes forecasting and responding to the knowledge needs of the operating
environment containing the control of resources, evaluation and development, the planning
process of curriculum, the learning process and guidance, learning environments and the
procedures of quality assurance. The evaluation target outcomes of the educational unit
include the outcomes of the education unit in relation to the defined objectives containing
outcomes related to students, working life, personnel, economic performance, international
activities and regional development.
The evaluation of excellence starts with the participatory self-evaluation, which is
supplemented by the external evaluation, in which the participants come from other higher
education institutions. The participatory self-evaluation describes the history, presence and
future of the units. It also describes the pedagogical approach used and compares the
activities with national average figures in higher education. The evaluation is looking for
good or best practices and national benchmarks to develop education. The evaluation panel
should pay attention to the selection of indicators, which may measure the achievement of
national or institutional objectives. The Balanced Scorecard indicators may be different
among institutions; therefore, they cannot be fully compared with each other.
The cross functional evaluation panel is collected from other higher education institutions. It
studies and scores the written self-evaluation reports. Based on the written reports the
evaluation panel makes a decision about the evaluation visits. The aim of the visits is to
ascertain that the operations and results are as described in the self-evaluation report and
for the panel to arrive at its own view about the quality of education. After the visit, the
evaluation panel makes its proposal about the centres of excellence. The results of the
evaluation are published to disseminate the evaluation results and good practices of high
quality education.
The evaluation of the centres of excellence is a powerful procedure to develop higher
education. The evaluation acknowledges the development of education, brings out high
quality learning practices and disseminates excellent outcomes. It also emphasises the
importance of pedagogical development in quality assurance. The quality assurance of
education is not only procedures and systems, but excellent educational units should have
pedagogical views which guide them to reach the desired objectives following the outlines
of the education policy.
7. Process management as an approach of quality assurance
The common European quality assurance of higher education institutions (ENQA, 2009) has
a relatively short history, where the Berlin Communiqu (2003) was a prominent takeoff.
Integrated Higher Education Management: Summary of Management Approaches
201
Autonomous European higher education institutions have an obligation to plan and
implement their own quality assurance systems. When the quality assurance systems
mature over time, they move away from the compliance auditing and focus more on process
management and the achievement of objectives (Pollit et al., 2002). Business process
management has taken hold in private companies, but recently process management has
reached higher education institutions.
The strategy map describes the main processes at the overall level of an institution,
including research and development, support services and education. Educational
management requires a much more detailed level to guide personnel, students and
stakeholders in the processes. It is important to engage personnel in the process description
and maintenance. The planning and implementation of information systems require the
most detailed descriptions of processes. They usually are too complicated for the ordinary
users who are looking for help in performing their tasks. The majority of improvements can
be achieved without information systems.
A process comprises the network or a series of value-added activities performed by the
collaborator to accomplish the assignment. The lanes of the flow charts describe the
responsibilities of those who are performing the processes. The lanes describe the
collaborating partners and information systems, and the responsibilities include activities
and decisions that have essential connections between each other. From the point of view of
process maintenance and improvement, it is necessary to keep the process descriptions as
simple as possible for the personnel and students to carry out the necessary tasks. The
internal customers come from the institution but external customers and partners come from
other organisations. Therefore it is important to extend the concept of quality assurance
outside the institution.
Continuous improvement is the main element to learn from experience and to develop the
processes (Mehra & Argawal, 2003; Escrig-Tena, 2004). The planning, implementation,
evaluation and improvement of processes require active maintenance and audits of the
processes. Business process reengineering defined by Hammer and Champy (1993) is the
fundamental reconsideration and radical redesign to achieve drastic improvement of
performances. Instead of incremental continuous improvement, the processes are
redesigned or eliminated altogether.
The processes are audited in the external and internal audits. External auditing is carried out
by the quality assurance agency, based on the self-evaluation report, auditing material and
the site visit. The evaluation panel meets separately with the different groups and
stakeholders of the institutions and publishes the audit results. The external audit is part of
the auditing of the whole quality assurance system in Finland, described in the quality manual
of the Finnish Higher Education Evaluation Council (Korkeakoulujen arviointineuvosto, 2010).
The external quality audit group of the Turku University of Applied Sciences recommended
the systematic auditing of internal processes (Hintsanen et al., 2009).
The other maintenance operation is the internal audit, whereby the institution collects the
evaluation group that evaluates the need to improve or reengineer the processes and
inspects the conformance of processes. It is necessary to focus first on the improvement of
the processes and achievement of the objectives, and if no major amendments are found, to
look for quality deviations. There is no use to search only for quality deviations if the
Quality Assurance and Management
202
processes are inefficient and do not produce the desired outcomes when better processes are
available. The improvement or reengineering of processes is a great challenge which needs
clear understanding about the strategic objectives, competent and dedicated people and
support of top-management.
The flow charts of processes describe the different organisational units and stakeholders that
have the responsibilities of the actions and decisions. The higher education institutions have
to identify not only the internal organisational units but also the customers and partners.
The customers include potential, occasional and key customers. The partners include not
only the ordinary partners, but also strategic partners who have an important collaborating
role in achievement of the strategic objectives. Hence quality assurance should be extended
to the external partner if the management and internal processes are connected with the
external partners of the institution.
The integration of information systems to quality assurance is another main driver to
describe processes in higher education. Most Finnish higher education institutions have the
quality manuals and manual binders of evidence for the quality audits. These manuals are
passive documents that do not include dialogue, feedback and adequate guidance for
students and personnel. Intranet technology provides a solution to reduce or avoid paper-
based systems and support process management. It is reasonable to plan the structure of the
Intranet to follow the process map and include essential process information and guidance
for ordinary users. It also is essential to include the detailed flow charts and process cards to
the Intranet for those who need more information. A well-planned Intranet also should have
a feedback system to evaluate and improve the processes. The Intranet is supported by the
customer management system which collects customer and partner information to increase
the quality of processes.
8. Integrated higher education management
Strategic management, quality assurance and many other management approaches have
different kinds of backgrounds and they have been developed independently of each other,
but they meet in practice in many organisations. It is a great challenge to conceptually
integrate strategic management, quality assurance, the Balanced Scorecard, the promotion of
innovations, process management, partners, investments and economic success, and
customers in higher education institutions to the consistent system of integrated higher
education management to ensure high quality outcomes. This challenge is solved in this
section.
Table 1 describes the integration of strategic management with quality assurance to achieve
the objectives in the perspectives of the Balanced Scorecard. A higher education institution
must respond to the changes in its environment, including the international and national
economic policy and the local demand for labour, research and development. Strategic
management must adapt to the environment changes and therefore is a stronger
management approach which overshadows quality assurance. The ideas presented in the
table may take slightly different kinds of concepts in other organisations.
Successful strategic management produces radical or incremental innovations which are
outcomes of organisational learning. The innovations invented in the internal processes and
networks also may have strategic importance. In such a case, the innovations should be
Integrated Higher Education Management: Summary of Management Approaches
203
taken into consideration in the strategy process. Quality assurance typically produces
incremental innovations, even though quality assurance may help management analyse the
internal strengths and weaknesses with respect to the opportunities and threats of the
environment and consider the possibility for radical innovations.
The core of strategic management is in the internal processes, because the desired new
outcomes cannot be reached without renewed actions. Internal processes may produce new
or improved products or services with reengineered or improved processes. The
reengineering of processes has much potential, but it sometimes is interpreted as disturbing
in higher education. The internal processes and the knowledge do not change very quickly
among autonomous faculties. Reengineering may cause changes among the strategic or
other partners involved in the processes. Quality assurance typically produces continuous
improvement in existing processes. The improvement also may cause changes among the
partners and their operations.
Strategic management may cause large investment from the financial perspective. If radical
innovations cause reengineering of processes and new partners, the changes are risky
investments which do not happen rapidly in higher education, because the lengths of study
typically take many years, and because students follow their curricula and personal study
plans. Reengineering is a human investment which requires research and development and
in-house training, but it also may require real investments for new premises and equipment.
In a successful case, quality assurance produces increased economic success, which may
lead to better learning outcomes and lower costs. Continuous improvement can be used to
avoid large investments and organisational changes in the later stages.
Strategic management which produces radical or incremental innovations may increase
customer satisfaction among potential, occasional and key customers. High customer
satisfaction is the desired goal, which can be described by the success to achieve learning
objectives, new knowledge and innovations among other objectives. The scope of quality
assurance is limited, because continuous improvement mainly affects key and occasional
customers. Continuous improvement may keep customers satisfied, avoid drop-outs and
keep the processes sustainable. The concept of customers also can include stakeholders if
one wants to study their role in management.
Integrated higher education management can be summarised so that the radical innovations
are the reengineering of processes and respectively incremental innovations are continuous
improvement seen from the internal processes perspective. This is a result which opens up
opportunities to integrate innovations with strategic management, quality assurance and
process management with strategic or ordinary partners. These management approaches
can be integrated in practice in higher education institutions and also in other organisations.
The implementation of the strategic plan means typically investments to achieve economic
success, but quality assurance usually has smaller economic consequences.
Strategic management which aims to satisfy potential customers is the great challenge of
change management, because it is based on innovative products or services, entails the
reengineering or improvement of internal processes, calls for renewed collaboration with
partners and involves investments. Quality assurance that aims to increase economic
success and customer satisfaction usually is based on incremental innovations and
continuous improvement with ordinary partners.
Quality Assurance and Management
204
Strategic management
Quality assurance
Organisational learning:
innovative management
Radical or incremental
innovations
Incremental
innovations
Internal processes: products,
services and renewed processes
Reengineering or
continuous improvement
with partners
Continuous
improvement with
partners
Finance: sustainable economic
success
Investments and
increased economic
success
Increased economic
success
Customers: satisfied students
and employers
Potential, occasional and
key customers
Occasional and key
customers
Table 1. Integrated higher education management drives innovations, renewed processes,
economic success and satisfied customers.
The concept of integrated higher education management can be extended with respect to the
competitive strategies in higher education. Higher education institutions can be focused on
specific customers and thereafter, the focus strategy can be divided into differentiation and
cost effectiveness (Kettunen, 2002). Integrated higher education management also can be
studied in different autonomous higher education institutions which have created their own
quality assurance systems. The integration of various management approaches represents
consistent and efficient management, which can be evaluated in the auditing.
Another possibility to extend the concept of integrated higher education management is to
explore its meaning in the different subjects or fields of education. For example, the subject
of design has a wide and narrow meaning. The wide meaning of the design of the product
embraces, among other things, the planning of the structure and shape, the usage in the
cultural context, and the relationship with the strategy and quality assurance. The wide
meaning of the design is multidisciplinary, which is common in real life. The narrow
meaning in industrial design means the art to provide the outside shape of a product. In the
Swedish language, the word for design is formgivning, which means to give a form. That
interpretation represents the narrow connotation of design, which is more common in
education than in industry.
9. Conclusion
Autonomous higher education institutions have the responsibility to build their own quality
assurance systems. The purpose of a quality assurance system is to ensure that the strategic
and operative objects of the institution can be achieved. Quality assurance is not the only
management approach in higher education institutions, which typically have adopted many
pedagogical approaches and management theories developed in private and public
organisations. The results of this study show that the conceptual framework of integrated
higher education management encompasses the necessary management approaches of
higher education institutions.
Integrated Higher Education Management: Summary of Management Approaches
205
The strategy and quality maps provide a conceptual framework and practical tools for
higher education institutions to describe their strategic plan and quality assurance system in
a graphical form. They help management communicate the future plans and ways to
implement them to achieve the desired objectives. They make the management documents
understandable, which increases the commitment of personnel, students and stakeholders to
these plans. The conceptual tools also can be used in the external evaluations of the
institution.
The weakness of a written and detailed strategy document is the weak commitment at the
lower levels of an organisation. Therefore, it is important to engage personnel, students and
other stakeholders in the strategy process. The Web-based strategy dialogue can be used to
collect, evaluate and analyse the ideas of the stakeholders for a better future and increase the
commitment to the strategic plan. It is important that the managers of organisational units
analyse and discuss the results of the Web-based dialogue and implement the good ideas
not only in the strategic plans but also in the annual action plans, curricula and other
necessary documents. Even in a large higher education institution every individual can be
involved in the strategy process.
Each higher education institution has its own profile and customers. The profile
differentiates the institution, creates competitive advantage and increases the external
impact. The profile of the Turku University of Applied Sciences was defined as innovation
pedagogy in the strategy process. The breadth of expertise of the institution in applied
research and development and education encompasses several focal areas which are
planned based on the established knowledge of the faculties. The multidisciplinary faculties
of the institution are able to support the creation of innovations and respond to the customer
needs of the region with the networked applied research and development and the
integrated education.
The internal benchmarking of degree programmes is the enhancement-led evaluation
carried by the cross functional evaluation groups. The advantage of the cross evaluation is
its comparison of learning methods and processes to promote innovative collaboration
among the degree programmes and to support the profile of the institution to lead to the
creation of innovations. The external evaluation of the centres of excellence is the procedure
of the quality assurance agency to support the long-lasting educational development of the
institution. In Finland, the external evaluation encompasses the evaluation of operations and
outcomes of the organisational unit. The internal and external evaluations are important
elements of the quality culture, which are connected to the profile and other pedagogical
development of the institution.
Process management is an emerging management approach in higher education which
attains more importance when the quality assurance systems mature over time. The
processes and other elements of the quality assurance system must be maintained and
improved in a systematic manner. The quality audits and the implementation of information
systems are the main drivers to implement process management. The maintenance and
internal audits of processes should be designed at the moment of accepting the process
descriptions, but not later than after the external audit. Reconsideration and radical redesign
of processes is the primary task of the process audit if the strategic objectives are not
achieved. If no major improvements are found, the quality deviations must be reported.
Quality Assurance and Management
206
10. References
Ansoff, I. (1984). Implanting Strategic Management, Prentice Hall International, ISBN
013451808X, Englewood Cliffs, USA.
Berlin Communiqu (2003). Bologna Process Berlin 2003, Realising the European Higher
Education Area, Communiqu of the Conference of Ministers Responsible for
Higher Education in Berlin on 19 September 2003.
Bessant, J.; Lamming, R., Noke, H. & Phillips, W. (2005). Managing Innovation beyond the
Steady State. Technovation, Vol.25, No.12, pp. 13661376, ISSN 0166-4972.
Calabrese, R.L. (2003). The Ethical Imperative to Lead Change: Overcoming the Resistance
to Change. International Journal of Education Management, Vol.17, No.3, pp. 713,
ISSN 0951-354X.
Deming, W.E. (1986). Out of the Crisis, MIT, Center for Advanced Engineering Study, ISBN
0-262-54115-7, Cambridge, USA.
ENQA (2009). Standards and Guidelines for Quality Assurance in the European Higher Education
Area, European Association for Quality Assurance in Higher Education, ISBN 952-
5539-04-0, Helsinki, Finland, Retrieved from
http://www.enqa.eu/files/ESG_3edition%20(2).pdf.
Escrig-Tena, A.B. (2004). TQM as a Competitive Factor, A Theoretical and Empirical
Analysis. International Journal of Quality & Reliability Management, Vol.21, No.6, pp.
612637, ISSN 0265-671X.
Ford, J.D. & Ford, L.W. (2002). Resistance and the Background Conversations of Change.
Journal of Organizational Change Management, Vol.15, No.2, pp. 105121, ISSN 0953-
4814.
Hammer, M. & Champy, J. (1993). Reengineering the Corporation: A Manifesto for Business
Revolution, Harper Collins Publishers, ISBN 0-06-662112-7, New York, USA.
Hargreaves, J. & Christou, A. (2002). An Institutional Perspective on QAA Subject
Benchmarking. Quality Assurance in Education, Vol.10, No.3, pp. 187191, ISSN
0968-4883.
Hintsanen, V., Luukka, M.R., Lounasmeri, T., Majander, M., Renvall, J., Holopainen, H. &
Hiltunen, K. (2010). Audit of the quality assurance system of Turku University of Applied
Sciences, Korkeakoulujen arviointineuvoston julkaisuja 2:2010, Tammerprint Oy,
ISBN 978-952-206-134-8, Tampere, Finland, Retrieved from
http://www.kka.fi/files/982/KKA_0210.pdf.
Ilmola, L. & Kotsalo-Mustonen, A. (2003). Filters in the Strategy Formulation Process, Journal of
Universal Computer Science, Vol.9, No.6, pp. 481490, ISSN 0948-695x.
Kaplan, R. & Norton, D. (1996). The Balanced Scorecard: Translating Strategy into Action,
Harvard Business School Press, ISBN 0-87584-651-3, Boston, USA.
Kaplan, R. & Norton, D. (2004). Strategy Maps: Converting Intangible Assets into
Tangible Outcomes, Harvard Business School Press, ISBN 1-59139-134-2, Boston,
USA.
Kettunen, J. (2002). Competitive Strategies in Higher Education, Journal of Institutional
Research, Vol.11, No.2, pp. 3847. ISSN 14432110.
Integrated Higher Education Management: Summary of Management Approaches
207
Kettunen, J. (2004). Bridge Building for the Future of the Finnish Polytechnics, Journal of
Higher Education Outreach and Engagement, Vol.9, No.2, pp. 4357, ISSN 1534-
6102.
Kettunen, J. (2010a). Cross-evaluation of Degree Programmes in Higher Education, Quality
Assurance in Education, Vol.18, No.1, pp. 3446, ISSN 0968-4883.
Kettunen, J. (2010b). Strategy Process in Higher Education. Journal of Institutional Research,
Vol. 15, No.1, pp. 1627, ISSN 14432110.
Kettunen, J. (2011a). Evaluation of the Centres of Excellence in Higher Education. Tertiary
Education and Management, Vol.17, No.2, pp. 151161, ISSN 1358-3883.
Kettunen, J. (2011b). Innovation Pedagogy for Universities of Applied Sciences. Creative
Education, Vol.2, No.1, pp. 5662, ISSN 2151-4755.
Kettunen, J. (2011c). Strategy and Quality Maps in Higher Education. US-China Education
Review, Vol.8, No.2, pp. 149156, ISSN 1548-6613.
Kettunen, J. & Kantola, I. (2005). Management Information System Based on the Balanced
Scorecard. Campus-Wide Information Systems, Vol.22, No.5, pp. 263274, ISSN 1065-
0741.
Kettunen, J. & Kantola, M. (2007). Strategic Planning and Quality Assurance in the Bologna
Process. Perspectives, Policy and Practice in Higher Education, Vol.11, No.3, pp. 6773,
ISSN 1360-3108.
Korkeakoulujen arviointineuvosto (2010). Korkeakoulujen laatujrjestelmien auditointiksikirja
vuosiksi 20112017, Korkeakoulujen arviointineuvoston julkaisuja 16:2010,
Tammerprint 0y, ISBN 978-952-206-159-1, Tampere, Finland, Retrieved from
http://www.kka.fi/files/1201/KKA_1610.pdf.
Lee, C.C. & Yanc, J. (2000). Knowledge Value Chain. Journal of Management Development,
Vol.19, No.9, pp. 783794, ISSN 0262-1711.
Mehra, S. & Agrawal, S.P. (2003). Total Quality as a New Global Competitive Strategy.
International Journal of Quality & Reliability Management, Vol.20, No. 9, pp. 1009
1024, ISSN 0265-671X.
Piaget, J. (1999). The Psychology of Intelligence, Routledge, ISBN 0415210062, London,
UK.
Pollit, C.; Girre, X.; Lonsdale, J.; Mul, R.; Summa, H. & Waerness, M. (2002). Performance or
Compliance? Performance Audit and Public Management in Five Countries, Oxford
University Press, ISBN 0-19-829600-2, Oxford, UK.
Tague, N.R. (2005). The Quality Toolbox, ASQ Quality Press, ISBN 0-87389-639-4, Milwaukee,
USA.
Tidd, J.; Bessant, J. & Pavitt, K. (2001). Managing Innovation: Integrating Technological
Market and Organizational Change, Wiley, ISBN 9780470093269, Chicester,
UK.
Vygotsky, L.S. (1978). Mind in Society: The Development of Higher Psychological Processes. In: M.
Cole, V. John-Steiner, S. Scribner & E. Souberman (Eds.), Harvard University Press,
ISBN 0-674-57629-2, Cambridge, USA.
Welch, J.F. & Dey, S. (2002). Quality Measurement and Quality Assurance in Higher
Education. Quality Assurance in Education, Vol. 10, No.1, pp. 1725, ISSN 0968-
4883.
Quality Assurance and Management
208
Yorke, M. (2002). Subject Benchmarking and the Assessment of Student Learning. Quality
Assurance in Education, Vol. 10, No.2, pp. 155171, ISSN 0968-4883.
12
Quality Assurance in the Career of Nursing
Cecilia Latrach, Naldy Febr and Ingrid Demandes
Universidad Mayor
Chile
1. Introduction
Assessing the quality of university education has been presented as one of the main issues
on the agenda of education reforms worldwide (Villanueva, 2004). Evaluation and
accreditation processes as tools emerge to regulate the system of higher education from the
perspective of the quality of educational services offered.
Creation and promotion of accreditation and evaluation mechanisms are important to
ensure and promote the quality, comparability and transparency of the educational offer
strengthening national and international recognition of educational systems and institutions
(Mercosur, Estados asociados 2008).
Ensuring quality is a combination of planned and systematic actions that are necessary to
provide the adequate reliability that a product or service meets the requirements given for
quality, which should be supported in meeting the expectations of customers. Quality
assurance is based on the implementation of a documented system of work, establishing
clear, fixed and objective rules including all aspects related to the operational process. This
process begins with the design, followed by planning, production, presentation,
distribution, statistical techniques of control and staff training.
The complexity of the quality assurance system is that over the entire operating process a
rigorous control should be kept over the correct application of the rules or technical
specifications, methods and philosophies of quality
The quality assurance becomes important in higher education, because through this nursing
schools provide training for highly skilled professionals who respond to country needs and
protects the rights of citizens. It is here that according to UNESCO quality must be
combined with the relevance and impact because it is not possible to conceive as a quality
university the one that has no relevance to their social environment (Aguila, 2005).
In this chapter we develop the essential topics that should be considered by the various
participants in the teaching-learning process of nursing professionals at university level.
2. Chapter objectives
1. To analyze the basic principles of the concept of quality assurance in university
education in nursing.
2. Know the principles of quality assurance in the training of nursing professionals
Quality Assurance and Management
210
3. Recognize the importance of the process of accreditation for quality education in the
career of nursing.
4. Identify the standards and indicators to be considered for the management of quality
assurance for nursing schools.
3. Initial definitions
Assurance: Specialized financial dictionaries define assurance as the "branch of accounting
which aims to improve the quality of information to reduce business risk. Assurance
extends beyond the financial information, seeks to verify the facts, processes and even
qualitative information that relates to business practices and customer satisfaction.
Quality Assurance: It is a systematic, ongoing and continuous review, analysis and evaluation
of the level of compliance with the standards set at local, national and international level.
Accreditation systems: The accreditation system is defined as a set of policies, strategies,
processes and organizations whose main objective is to guarantee to society that higher
education institutions are part of the national system that meets the highest standards of
quality and the training of professionals. Accreditation is a witness of the State on the
quality of a program or institution based on a prior assessment in which the institution,
academic communities and Accreditation Agencies interfere.
Standards: These are conceptualized as the clear definition of a model, criterion, or rule of
the minimum acceptable requirements for the operation of specific processes, to ensure
quality in the provision of educational programs. The standards clearly state the expected
behavior and desired processes and are used as guides to evaluate their performance and
achieve continual improvement of services.
Indicators: Indicators are measures that quantify and assess the status of processes within
an institution. They represent summary measures that capture relevant information on
various attributes and dimensions of the evaluation processes and system performance.
Methods of evaluation: Defined as the methods for assessing processes by collecting
objective information both quantitative and qualitative in a systematic way to inform any
kind of decision. In the university context they can be defined by a variety of forms, types
and evaluation procedures according to the different objectives, evaluation units, agents or
consequences (Review and license states, regional accreditation agencies, self-study,
Performance Indicators , state Testing for validation of professional qualifications, cyclical
review programs (mandatory or voluntary), Specialized accreditation of professional
programs, institutional assessment).
Higher/University Education: The education provided by universities, a social right, as
such, is opposed to education understood as a privilege and it is understood as a "public
good" that will benefit the community as a whole. It helps to train people in the values of
freedom, social justice, solidarity and human rights, whose mission, task and results should
be in the service of harmonious development of man and society, so first term, must
respond and be accountable to the national community that surrounds and sustains it
(Ramirez, Ayarza et al, 1993). This leads to the evaluation of the work of institutions of
higher education and the respective quality assurance, both the university as an institution
and its academic programs.
Quality Assurance in the Career of Nursing
211
4. Conditions in the quality assurance of universities worldwide
In the last decade, the culture of evaluation of university education has become a
fundamental role in ensuring the quality of education at the international, regional, national
and institutions from the voluntary self-assessments.
Quality assurance has been defined by many authors, however, to consider the terms of this
chapter to that systematic, ongoing and continuous review, analysis and evaluation of the
level of compliance and standards set at local, national and international level (Konrad,
2011).
Faced with the challenge of globalization, concern about the comparability and convergence
among the various systems of higher education acquires special relevance for Educational
Integration in Latin America. The strategy to facilitate the comparison of regional training
programs is to establish objective processes of quality assurance in order to increase mutual
trust among institutions of higher education (UNESCO, 2009).
Since the early 90's in response to the urgent need to develop strategies for quality assurance
of educational provision/offer at the regional level, National Accreditation Agencies,
Networks, Agencies and Regional Accreditation mechanisms emerged.
The traditional cycle of continuous improvement applied in different organizational systems
is undoubtedly applicable as a strategy to improve the quality of the educational process at
all levels.
4.1 The circle of Deming
The circle of Deming or PDCA (Plan, Do, Check, Act), is a strategy of continuous quality
improvement and it is accomplished in four steps (Figure 1). They are then briefly assessed
the development of the four phases of quality circle (Hernandez, Rodriguez, 2006).
4.1.1 Step 1, planning
At this step, we have the following activities:
a. First, it is the vision or goals, which is to establish the purpose of improvement.
b. Once set a goal, the person makes a description of his / her current situation, referring
to all aspects and determines the areas that have problems or enhancements, making a
selection of the most outstanding and greatest impact.
c. Determine the definition of a certain theory of solution in order to bring the variable to
improve at a peak.
d. Finally, we define a work plan to carry out an implementation plan to test the theory of
solution
4.1.2 Step 2, make
At this step, we carry out the planned work plan, establishing a tracking control to be sure
of developing the program. To develop the implementation, there are tools such as Gantt
chart or checklist of tasks performed, leading to check the progress of the process.
Quality Assurance and Management
212
4.1.3 Step 3, checking
At this step the results are validated and a comparison with the planned is carried out.
4.1.4 Step 4, act
At this final step the cycle of quality concludes and it is checked if verification was
successful and achieved the desired benefits, it is vital to systematize and make a
documentation of the changes made to secure profits.
The quality circle becomes a process of continuous improvement that should be used
systematically, becoming a permanent process of Planning, Doing, Checking and Acting.
Source: Supperting empowerment with Demings PDSA cycle. Empowerment Organizations, MCB
University Press. 1995.
Fig. 1. The deming circle
5. Quality in higher education for nursing schools
International practice recognizes various concepts of quality that lead to different types of
evaluation and accreditation. Basically a distinction between: (i) quality as excellence as
defined by the highest standards, (ii) quality and ability to meet the stated mission of the
institution or program, (iii) quality of learning outcomes achieved by students; (iv) quality
threshold as defined according to criteria and standards, (v) quality and continuous
improvement where the center of gravity lies on the organizational learning, (vi) quality and
value for money obtained, a concept used in situations where governments face fiscal
constraints or seek to raise the efficiency of institutions or programs (Latrach, Soto et al, 2009).
The quality of university education is a philosophical concept; definitions vary and in some
ways reflect different perspectives of the individual and society. In a democratic society,
where there must be room for that many people to think differently, there is no single
correct definition of quality, it is a relative concept that depends on the individual who uses
it. To have a set of criteria from the perspective of different groups and no and not
supporting a single definition of quality can provide a practical solution to a highly complex
philosophical issue, not because it lacks an underlying theory, but because different groups
have the right to bear different perspectives. This makes us understand that the concept of
quality in education has many definitions, all related to different interpretations concerning
the teaching-learning process. As it is obvious to conclude that it is not possible to choose
one and take it for universally valid, since this type of definition does not exist, but it is
necessary to refine the definition and we must align with the mission, vision and exit profile
Planning
Make Checking
Act
Quality Assurance in the Career of Nursing
213
of the institution and the school of nursing without forgetting the following premises in
relation to education delivered: 1) meets the expectations of the graduate, 2) meets the
expectations of potential employers; 3) enables the practitioner to able to make an effective
contribution to society (CNA, 2008).
As the quality of care, university quality has dimensions defined and evaluated in different
systems of accreditation of university quality; these are relevance, effectiveness, availability
of resources, efficiency, effectiveness and processes, generally evaluated by the following
components: 1) characteristics of the organization, 2) teaching-learning process, 3) human
Resources, 4) Infrastructure.
6. Accreditation system for schools of nursing
The accreditation process is a process that contributes significantly to the quality
management of the university and the school nurse, whose installation should be gradual
and constant over time. To display the management which we aim to some critical factors
should be considered (Garcia, Cordero et al, 2008).
Installing a policy of institutional quality, which is an explicit definition of the core
guidelines of the institution, incorporated into its mission and vision, which
consequently leads to a cultural change.
Prioritization of quality issues over others, in order to reorganize institutional
structures, leading to financial and human resources development of the plan to run.
The management of the institution should lead the establishment of a culture-based
quality improvement processes. Involve all stakeholders in the establishment "Quality
is not the responsibility of the heads, but everybody elses"
Development of a formal quality structure with a resolution of hours and duties.
The system incorporates incentives for prestige among the institutions and these
generate competition to offer better benefits and services, which will directly benefit the
users, who will be more satisfied with Institutions that present the highest quality
standards.
When an entity develops process improvements aimed at achieving compliance with
accreditation standards, this entity gets an increase in the probability that the customer
is treated with full respect for their rights.
We will understand accreditation systems as the process by which an educational institution
or program provides information about its operations and achievements to an external body
which assesses and judges independently, this information is reflected in a public statement
about the value or the quality of the program or institution. Accreditation is not permanent,
but is granted for a period that can vary depending on years of the accreditation system
selected, from which it can be renewed or withdrawn, based on the results obtained in the
process of reassessment.
Consequently, the university accreditation is seen as a mechanism by which the educational
community establishes and maintains self-regulation, and guarantees to the direct and
indirect users of the services offered, their integrity, relevance and quality at levels that
make it worthy the public trust and respect through their ability to create cultural, scientific
and technological innovation and training of human resources (Latrach, Soto et al, 2009).
Quality Assurance and Management
214
The evaluation and accreditation are related processes whose practice is intertwined, as
shall be credited as a result of a process of evaluation and monitoring, however more than a
diagnosis that leads to action by the institution itself. The accreditation is proof of credibility
by the society and demanding public of educational services.
Accreditation systems for nursing schools generally have three stages (Figure 2): 1) Self-
assessment process, 2) Process visit peer reviewer, 3) Final report of the accreditation.
Accreditation is an improvement strategy, where the preparation for this is the beginning of
the process. Processes are the unit of change, the main element "institutions do not change
unless they change their processes.
Fig. 2. A process of accreditation
7. Proposed indicators
The requirements of the different dimensions of quality applied to university education, not
only must identify and understand the behavior of the variables that influence this process,
but also determine the minimum level of quality and productivity necessary to ensure
effective and efficient higher education, and secondly the continuity and development of the
institution.
The level of quality is a concept that can be measured and evaluated by comparison with
peers, perceptions of users and stakeholders, among others. The quality assessment should
be objective and absolute, which requires the design of different control mechanisms by
building standards and indicators that allow linking operation, resources and outcomes for
Quality Assurance in the Career of Nursing
215
activities, events, processes, organizational units and other components of the institution of
higher education.
The quality of the educational process is evaluated through the so-called "indicators",
defined as data that "suggest" how they develop different activities derived from the
educational process, compared to how they should be done. Therefore, an indicator is a
characteristic or variable that can be measured. The construction of an indicator means to
account for a phenomenon in education, by absolute numbers, rates or more sophisticated
indices. The indicators are classified into three indicators of structure, process and outcome.
The objectives of using standards and indicators for the management of the nursing schools
are: 1) Identify problem situations or likely to be improved, 2) Incorporate improvement
cycles to solve the identified problems, 3) Internal comparisons over time, 4) Comparisons
with other institutions. These indicators will: a) Measure "how well executed, b) Develop
evaluation criteria; c) Design a program of continuous improvement.
7.1 Attributes of good indicators in education
The quality of an indicator, although much depends on the quality of the data from which to
build (components), also depends on the quality of information systems or information
sources. You should also enjoy certain features, outlined below (Valenzuela, 2005).
Attributes of good indicators in education
Be useful: Gives answers and is designed for a specific purpose.
Validity: Measures what it intends to measure.
Reliability: The same results are reproduced if the measurement is repeated under
similar conditions.
Specificity: Measures only the phenomenon being measured.
Sensitivity: Measures the changes in the phenomenon being measured.
Measurability: Based on data available or easy to obtain and easy to use. It is imperative
to collect a limited amount, but feasible and valid rather than trying to complicate the
indicators by systems impractical or complex parameters.
Relevance: Able to give clear answers to relevant issues embedded in health policies.
Cost Effectiveness: That the investment in time and other resources needed to construct
the indicator is justified by its use and results
Integrity: Means that the required data are complete.
Internal Consistency: Refers that in the indicators, seen alone or in groups, the values are
consistent and sensitive to change
Transparency: Refers to be easily understood and interpreted by users
Dissemination: To be accessible to users through periodicals
Dynamism: To update and correct as far as the environment changes. This may change in
terms of the specific conditions described by indicators, data availability, scientific
knowledge, or in levels of interest and needs of users.
Table 1. Attributes of good indicators in education
Once the indicators are established, they must be subjected to permanent monitoring of the
quality and establish a mechanism to disseminate them, including the timing and frequency
of compilation.
Quality Assurance and Management
216
Structure indicators measure the quality of the characteristics of the framework in which
services and state resources to provide, allow to assess how the academic unit and the
University are organized and equipped, allowing to determine if resources are available and
organized to facilitate the educational process. The evaluation of the structure involves:
Material resources such as facilities, equipment and monetary budget.
Human Resources: Number and qualifications of personnel
Institutional or managerial aspects of management: Documentation relating to existing
processes and organization
The evaluation of the structure indicators is easy, fast and objective because it encompasses
a series of static characteristics and previously established, however, the most perfect
structure does not guarantee the quality of management of the academic unit or university.
Process indicators assess and measure the quality of the process, defined as a set of
intertwined actions with a purpose that lead to a result. These focus on how care is given,
measured if all the steps of a process are done correctly, these indicators focus on the "how"
the educational process is carried out, evaluate and measure whether all the steps of a given
process are carried out as correct.
Outcome indicators assess the expected effect, that is to say, they allow an analysis of the
results (cohort graduation rate) refer to the benefit achieved in students, providing
opportunities to assess efficacy, effectiveness and efficiency of the program evaluated
Here, a proposal for some indicators of management structure, process and outcome to be
considered by nursing schools to determine the quality of training will be evaluated.
INDICATOR NAME STAGE OF THE PROCESS
EVALUATED
TIPE
INDICATOR
Admission Rate of Return Sign up for students Process
Admission Offered Rate Sign up for Students Process
Satisfaction of students,
teachers, employers.
The whole process of training Process
Rating support services The whole process of training Structure
Cohorts for performance The whole process of training Process
Retention cohorts The whole process of training Process
Cohort dropout rate The whole process of training Process
Repetition rate by cohort The whole process of training Process
Evolution for Teachers day
academic hierarchies
The whole process of training Structure
Teacher retention rate The whole process of training Structure
Cohort graduation rate
(according to the actual number
of years program)
Completion of the educational process Result
Average time spent by cohort Completion of the educational process Result
Employability rate of graduates
per year
Completion of the educational process Result
Table 2. Indicators of management
Quality Assurance in the Career of Nursing
217
8. Conclusions
Nursing is a profession and discipline deeply rooted humanist, whose essence is the care of
people. Its foundations give support to a practice, profoundly humanist, which has evolved
with scientific and technical progress. In keeping with its purpose to improve, exercises the
power that tends to quality assurance systems in health services, seeking to satisfy the needs
of society. Thus, quality has become an essential element of health services considering the
fundamental requirement for the training of nursing professionals.
The accreditation of the School of Nursing is the result of a process of evaluation and
systematic monitoring and voluntary compliance of university functions, which allows
getting accurate and objective information on the quality of the academic unit evaluated. To
certify the quality of trained human resources and the various educational processes taking
place in it. It is the formal and public recognition given to a nursing school that has made
significant progress in fulfilling its mission and stated goals, and meets an agreed set of
criteria, indicators and standards of relevance and quality.
This activity is based on the constant search for excellence and represents the collective
effort of all participants in the teaching-learning process to be accountable to themselves and
society, on the appropriateness, relevance and quality of his being and institutional work.
9. References
guila V. (2005). El concepto de calidad en la educacin: clave para el logro de la
competitividad institucional. Revista Iberoamericana de Educacin, vol.35, 5, (marzo
2005), paginas 1-8, ISSN:1681-5653.
Comisin Nacional de Acreditacin de pregrado. Chile (CNA). Sistema Nacional de
aseguramiento de la calidad de Educacin Superior. Extrado enero 2008, Fecha de
acceso 10 de julio 2011, disponible desde http:
www.cnachile.cl/portada/port_presgeneral.html
Garca G, Cordero R, Peralta A, Santamara M & Gonzlez J.(2008) Sistema de evaluacin,
acreditacin y certificacin de la educacin superior en Amrica latina y el Caribe-
Problemtica regional y plan integral de desarrollo. Aprobado en la LXXVI reunin
del consejo ejecutivo de la UDUAL 25 y 26 de noviembre, Monterrey, Nuevo Len,
Mxico, 2008. Disponible desde:
http://www.udual.org/Evaluacion/SEACESALC/SEACESALC.pdf
Hernndez S, Rodrguez. Introduccin a la Administracin. Ed Mcgraw-Hill Interamericana, 4
ed. 2006.
Konrad Fundacin (2011).Sistema Institucional de aseguramiento de la calidad SIAC. Fecha de
acceso 10 de julio 2011, disponible desde:
http://www.konradlorenz.edu.co/images/stories/reglamentos/SISTEMA_INSTI
TUCIONAL_DE_ASEGURAMIENTO_DE_LA_CALIDAD_SIAC.pdf
Latrach C, Soto P, Gonzlez I, Caballero E & Inalaf C (2009). Aseguramiento de la calidad
en la formacin de las enfermeras desde la perspectiva de los procesos de
acreditacin nacional. Cienc. enferm., 15. 2. (Agosto 2009), paginas 79-94. ISSN:
0717-2075.
Quality Assurance and Management
218
Mercosur y Estados Asociados (2008). Acuerdo sobre la creacin e implementacin de un Sistema
de Acreditacin de Carreras Universitarias para el Reconocimiento Regional de la Calidad
Acadmica de sus respectivas titulaciones en el MERCOSUR y Estados Asociados.
XXXVCMC-San Miguel de Tucumn, 30/VI/08. Fecha de acceso 10 de julio 2011,
disponible desde: http://www.sice.oas.org/trade/mrcsrs/decisions/dec1708s.pdf
Ramrez S, Ayarza H, Char R, Gonzlez L & Silva M (1993). Calidad de la enseanza
universitaria, criterios de verificacin. Fecha de acceso 10 de julio 2011, disponible
desde: http://200.45.54.151/novedades/documentos/gonzales_ayarza.pdf
UNESCO. (2009). Conferencia Mundial de Educacin Superior 2009: Las Nuevas Dinmicas
de la Educacin Superior y de la Investigacin para el Cambio Social y el
Desarrollo. Pars, 58, Julio de 2009.
Valenzuela M, (2005). Indicadores de salud, caractersticas, uso, ejemplos. Cienc. Trab. Vol 7.
17, (julio-septiembre), pginas:118-122, 2005.
Villanueva, E. (2004). La acreditacin en Amrica Latina: el caso de Argentina en la RIACES
y en el MERCOSUR. Revista Iberoamericana de Educacin, vol.35, (mayo-agosto 2004),
paginas 99-112, ISSN 1681-5653.
13
Quality Assurance of Medicines in Practice
Beverley Glass
1
and Alison Haywood
2
1
James Cook University,
2
Griffith University,
Australia
1. Introduction
The quality of medicines in relation to their stability has previously been seen to be entirely
the responsibility of scientists within the pharmaceutical industry. Nowadays, however,
since pharmacists have an important role to play in the delivery of safe, effective and quality
medicines (drug products), they are increasingly being required to make decisions related to
the stability of drugs in the day-to-day practice of both hospital and community pharmacy.
These decisions range from deciding on whether a liquid dosage form, extemporaneously
prepared from a commercial tablet or capsule is stable or whether it is appropriate to
repackage a drug product into a dose administration aid (DAA). Pharmacists always
consider the stability of the drug concerned and whether it might be preferable to crush a
tablet or sprinkle the contents of a capsule over food or mix it in a drink, as is common
practice in many nursing homes, when patients are unable to swallow. Pharmacists are also
required to consider the implications of the transfer to a non-manufacturers pack on the
stability of a drug product. Despite the widespread use of DAAs, and the common practices
of extemporaneous dispensing (compounding) and crushing tablets to be mixed with
various liquid media, there is little available data regarding the drug stability following
repackaging or alteration, involving compounding liquids or crushing of tablets.
This chapter examines the stability implications of extemporaneously prepared liquids,
tablet crushing and repackaging of tablets and capsules into DAAs, by reviewing the
literature and highlighting the research undertaken by the authors. Results from their
published data have revealed stability concerns with only 7.2% of oral liquids prepared
extemporaneously, primarily due to interactions between the drug and the excipients in the
formulation. Further research has also provided evidence on the stability of medicines
commonly repacked in DAAs to support pharmacists in making appropriate clinical and
operational decisions regarding this repackaging process.
These findings will confirm the importance of knowledge of drug stability for the practising
pharmacist, who is involved with modifying or altering drug products, whether
repackaging into DAAs, compounding oral liquids or advising on the suitability of crushing
tablets. Guidelines on appropriate practice will be provided, in addition to highlighting
challenges facing the pharmacist in continuing to deliver safe, effective and quality
medicines.
Quality Assurance and Management
220
2. Dose administration aids
Populations are increasing in age worldwide as are the number of medicines prescribed,
with a number of these patients receiving their medication in DAAs due to the benefits in
terms of health outcomes and cost of health care. Despite the widespread use of these
devices, there is little available data on the quality implications, based on the stability of
these drug products when repackaged into such devices (Walker, 1992; Ware, Holford et al.,
1994; Nunney & Rayner, 2001; Church & Smith, 2006). Repackaging of a medicine, involving
removal from its primary packaging, invalidates the stability guarantee of the manufacturer.
In fact, drug manufacturers on the whole, tend to discourage repackaging of medicines and
as there is little quality data available to support this process. It is thus the role of the health
care team to ensure optimal patient care by making an informed judgment as to the effect on
the quality and safety of this repackaging process.
2.1 Compliance aids
Compliance aids, also referred to as Multi-Compartment Compliance Aids (MCCAs) or
DAAs (Figure 1), are devices which have been developed to assist patients in managing
their medicines by arranging individual doses according to their prescribed dose schedule
throughout the day.
Fig. 1. Examples of Compliance Aids: Webstercare Cold Seal Flexi-Pak (left), dosette box
(right).
These aids have been used to facilitate medication administration to patients for over 30
years and their wider application has been strengthened by various government programs
worldwide to facilitate their use (Llewelyn, Mangan et al., 2010). A community pharmacy
contractual framework in the UK now places emphasis on assessing and providing practical
compliance aids to all patients who fall within the protection of the Disability
Discrimination Act 1995 and need help with medicine taking (Chan, Swinden et al., 2007).
The Australian Government Department of Health and Ageing has funded a number of
professional programs and services under the Better Community Health Initiative of the 4th
Quality Assurance of Medicines in Practice
221
and 5th Community Pharmacy Agreements, including the DAA Program, where the dollar
value was increased from nearly $73 million to $132 million (Australian_Government, 2010).
The objective of this program is to identify patients who will derive the most benefit from
the supply of a DAA, to develop a sustainable service and payment model capable of
meeting the programs aim and to trial the broader use of these aids within the community
setting. The provision of a DAA service through community pharmacies is expected to
reduce medication related hospitalisation and adverse events through improved medication
management. This should result in improved quality of life and health status for patients,
and have flow on benefits for the community by reducing the demand on aged care facilities
and costs associated with adverse reactions to medication mismanagement.
2.2 Stability of repackaged medicines
The stability of a pharmaceutical product may be defined as the capability of a particular
medicine, in a specified container, to remain within its physical, chemical, microbiological,
therapeutic and toxicological specifications. The shelf-life of a drug product may be affected
by the intrinsic stability of the active pharmaceutical ingredient (API) and the excipients, the
potential interactions between them, the manufacturing process, the dosage form or drug
product, and the packaging and environmental conditions encountered during their
transport, storage and use (Aulton, 2007).
Pharmaceuticals are expected to meet specifications for identity, purity, quality and strength
throughout their defined storage period. The stability of manufactured medicines is
routinely confirmed by the drug manufacturers according to international regulatory
requirements (ICH, 2003), where stability studies on packaged medicines are conducted at
real-time long-term and accelerated conditions at specific temperatures and relative
humidity (RH). This represents storage conditions experienced in the distribution chain of
the climatic zone(s) of the country or region of the world concerned. Manufacturers
packaging is designed to protect drug products from environmental factors encountered
during storage, such as light, air (oxygen, carbon dioxide and other gases), and moisture,
while limiting interactions between the product and the packaging material. However, this
does not guarantee the stability of the API and the drug product on removal and
repackaging into a DAA. A recent survey of 392 repackaged products revealed that,
although some information regarding the potential stability of solid dosage forms in DAAs
can be obtained from manufacturers, there is still a lack of short-term stability data for the
transfer of drug products into these devices (Church & Smith, 2006). Thus, although the
benefits of the use of these devices, in terms of both health outcomes and cost of healthcare
have been reported (Simmons, Upjohn et al., 2000; Lee, Grace et al., 2006), there is little
available data regarding the shelf-life of drug products when repackaged. The fact that there
is little available stability data is significant considering the value of these aids, the
investment in dollars and the extent to which they are being used to aid adherence.
In electing to repackage a drug product into a DAA, healthcare professionals must consider
the implications on drug stability of the transfer to a non-manufacturer pack. Pharmacists
thus rely largely on individual drug storage recommendations for the medicine in the
manufactures packaging, general guidelines for repackaging, e.g. in Australia (PSA, 2007),
the UK (RPSGB, 2003) and USA (USP, 2010), and their basic understanding of inherent drug
stability to make case-by-case recommendations as to whether repackaging is appropriate. A
Quality Assurance and Management
222
small number of medicines have been investigated for their stability following repackaging
into DAAs, namely aspirin, atenolol, clozapine, frusemide, paracetamol, prochlorperazine,
and sodium valproate (Table 1). These studies have contributed significantly to the body of
evidence available on repackaging into DAAs and are detailed below. These drug
candidates were chosen for study for a number of reasons, including that they were
commonly repackaged into DAAs, because of their proven susceptibility to various
environmental conditions and/ or because of anecdotal evidence from the practice of
problems encountered when these drugs are repackaged either from a patient or health
professional perspective.
Active Ingredient Stability considerations Literature reference
Aspirin Moisture sensitive (Haywood, Llewelyn et al., 2011)
Atenolol Light sensitive (Chan, Swinden et al., 2007)
Clozapine Oxygen sensitive (Perks, Robertson et al., 2011)
Frusemide Light sensitive (Bowen, Mangan et al., 2007)
Paracetamol Moisture sensitive (Haywood, Mangan et al., 2006)
Prochlorperazine Light sensitive (Glass, Mangan et al., 2009)
Sodium valproate Hygroscopic (Llewelyn, Mangan et al., 2010)
Table 1. Drug candidates investigated for repackaging into DAAs.
2.3 Repackaging moisture-sensitive medicines
Three studies (Haywood, Mangan et al., 2006; Llewelyn, Mangan et al., 2010; Haywood,
Llewelyn et al., 2011) have reported on the stability considerations of repackaging medicines
that are hygroscopic or sensitive to moisture. The medicines were exposed to controlled
room temperature conditions and accelerated conditions (elevated temperature and relative
humidity). The findings of all studies emphasize the importance of ensuring that these
medicines are stored in appropriate well-sealed devices. While well-sealed devices, such as
the WebsterPak are commonly utilised in community and hospital practice, it is not
known which devices are used by patients in their homes, since many of these devices that
do not have adequate air-tight seals, such as the dosette box (Figure 1), are available in
supermarkets and general stores. One of the studies also investigated whether splitting
tablets, as is commonly undertaken by patients on low-dose Aspirin, had any adverse effects
on the stability and quality of these tablets, when repackaged.
2.3.1 Paracetamol
Haywood and colleagues (Haywood, Mangan et al., 2006) examined the stability
implications of repackaging commonly used 500 mg paracetamol tablets (Panamax, Sanofi
Synthelabo) in a DAA frequently employed in practice (Multidose WebsterPak).
Paracetamol has the potential to undergo hydrolysis and therefore requires protection from
moisture. The samples in this study were stored under controlled long-term (25C; 60% RH)
and accelerated (40C; 75% RH) conditions as per the ICH (International Conference on
Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human
Use) guidelines for a period of three months. Physical characteristics of the tablets, including
weight uniformity, physical appearance, hardness, friability, disintegration and dissolution
were evaluated at time = 0, directly after heat sealing, 1 month and 3 months. Chemical
Quality Assurance of Medicines in Practice
223
stability was confirmed by a validated high performance liquid chromatography (HPLC)
method. The results were compared to control samples stored in the original packaging.
The results of the study were very favourable for repackaging paracetamol, indicating that
all requirements for the physicochemical stability were met with the paracetamol content
within the required British Pharmacopoeial (BP) range of 95105% of the labelled amount,
for all storage conditions, even those conditions of high humidity. The results suggest that
paracetamol tablets repackaged into a DAA offering sufficient protection from moisture
would remain stable for a reasonable in-use period of approximately six weeks (i.e. allowing
two weeks for advanced packing and delivery on a four-week supply).
2.3.2 Aspirin
Aspirin (acetylsalicylic acid) in low-doses has been increasingly prescribed for primary
prevention of stroke and acute myocardial infarction in the elderly. A recent study has
indicated that low-dose aspirin is also a cost-effective option in primary prevention and the
majority of healthcare systems are more than willing to pay for any additional Quality-
Adjusted Life Years (QALYs) gained (Annemans, Wittrup-Jensen et al., 2010). It is often
more cost-effective for patients to purchase standard dose (300 mg) aspirin and to cut the
tablet in half to achieve a low-dose equivalent. Tablet splitting or dividing has been an
accepted practice for many years as a means of obtaining the prescribed dose of a
medication and for cost-saving purposes (Marriott & Nation, 2002). However, the storage of
split tablets is not well discussed in the literature and anecdotal evidence suggests that
especially elderly patients or their carers split tablets in advance and then store the split
tablets in bottles that previously contained the same medication, a different medication or
some other substance, or in a compliance aid such as a dosette box (Marriott & Nation,
2002). Due to stability concerns, patients and carers are usually advised that when half a
tablet is taken, the unused half should be immediately discarded, particularly with
medicines that are known to be unstable when exposed to light and air.
Considering the above practices and the fact that acetylsalicylic acid is rapidly hydrolysed to
salicylic acid on exposure to moisture, a recent study assessed the stability of 300 mg aspirin
tablets (Solprin Dispersible Tablets, Reckitt Benckiser) when repackaged in a dosette box
obtained from a local supermarket and stored under a number of in-use conditions, both as
a whole and split tablet (Haywood, Llewelyn et al., 2011). This is an important consideration
as it is a decision to be made in practice by pharmacists or at home by patients and carers.
The acetylsalicylic acid content remained within BP specifications (95105% of the labelled
amount) for all except the accelerated storage conditions, with 93.4% of the drug remaining
in this case, and the salicylic acid content at 0.04% (BP limit 0.0006%). The split tablets did
not display any additional degradation of the acetylsalicylic acid or increased amount of the
degradant salicylic acid, when compared to the whole tablets under the same conditions.
While the acetylsalicylic acid content remained within specifications under standard room
conditions, it must be noted that the limit for the degradant was exceeded under all
conditions. Additionally there was some colouration and disintegration of the tablets, thus
compromising the quality of this medication and suggesting that this practice of
repackaging by patients is inappropriate. This study in fact does confirm the instructions
given that these dispersible tablets should not be removed from their original packaging and
that if tablets are split, that the remaining half should be discarded.
Quality Assurance and Management
224
2.3.3 Sodium valproate
Llewelyn and colleagues (Llewelyn, Mangan et al., 2010) undertook a study on the stability
of 100 mg sodium valproate tablets (Epilim, Sanofi-Aventis) repackaged into DAAs
(WebsterPak) and stored under various temperature and humidity conditions. Sodium
valproate, a commonly used antiepileptic is unstable in the presence of moisture due to its
hygroscopic and deliquescent nature. The results revealed that while the sodium valproate
content in the tablets remained within an acceptable range (90110% of the labelled amount)
under all storage conditions for eight weeks, the physical stability was not maintained, with
unacceptable weight variation in the tablets, changes in their dissolution profiles and
significant changes in their appearance, under accelerated conditions, due to the
hygroscopicity of the API, even after only three weeks of storage (Figure 2) (Llewelyn,
Mangan et al., 2010).
Fig. 2. Sodium valproate tablets after 21 days of storage at accelerated (40C; 75% RH) (left),
refrigerated (28C) (middle) and controlled room temperature (25C) (right) conditions.
The results of this study highlight the fact that accelerated conditions of temperature and
humidity should be taken into account, and that cognisance is taken from the fact that in
different countries, and in fact within the same country, the climatic conditions might vary
considerably. Medicines therefore may be appropriately repackaged in, for example, a
temperate region such as London, Los Angeles or Sydney, but repackaging that same
medicine in tropical or desert regions such as Darwin or Dubai may be inappropriate due to
increased temperature, humidity and light conditions. These findings are thus significant
because these accelerated conditions are not uncommonly encountered in northern
Australia and other tropical regions worldwide.
2.4 Repackaging light-sensitive medicines
Three studies (Bowen, Mangan et al., 2007; Chan, Swinden et al., 2007; Glass, Mangan et al.,
2009) have reported on the stability considerations of repackaging medicines that are
sensitive to light. The medicines were exposed to controlled room temperature conditions
(25C; 60% RH) and accelerated conditions (40C; 75% RH) and two of the studies also
included those light conditions specified by the ICH (ICH, 1996).
2.4.1 Atenolol
Atenolol is reported to be photoreactive when exposed to UVAUVB radiation with
photodegradation increasing with a decrease in the pH value (Aryal & Skalko-Basnet, 2008).
Quality Assurance of Medicines in Practice
225
The main photodegradation product at pH 7.4 has been identified as 2-(4-hydroxyphenyl)
acetamide (Andrisano, Gotti et al., 1999) (Figure 3).
Fig. 3. Photodegradation of atenolol
Chan and colleagues (Chan, Swinden et al., 2007) reported on the stability of atenolol 100
mg tablets in a 28-chamber compliance aid with transparent lids, stored for four weeks at
room temperature (25C; 60% RH) and accelerated (40C; 75% RH) conditions. Tablets were
also stored at room temperature in their original packaging and in Petri dishes. All tablets
stored at room temperature conditions passed the necessary physical tests (weight
uniformity, physical appearance, hardness, friability, disintegration and dissolution) and
demonstrated chemical stability, however the tablets stored at accelerated conditions
although chemically stable, showed an increase in disintegration time and decreased
dissolution time when compared to the tablets stored in the original blister packaging. A
limitation of the study was that only one sampling time point (Week 4) was used with
comparison of the results to the tablets stored in the original packaging, as opposed to
observing changes from an analytical determination at the outset (time = 0). Further, the
brand of the compliance aid or the degree of protection afforded against air, moisture and
light is unknown (Glass, Haywood et al., 2009).
2.4.2 Frusemide
Frusemide, a light sensitive drug commonly used in the treatment of cardiac failure and
hypertension is often repacked into a DAA. A study by Bowen and colleagues (Bowen,
Mangan et al., 2007) reported on the in-use stability implications of repackaging 40 mg
frusemide tablets (Uremide, Alphapharm). In addition to storing the medicines under
controlled room temperature conditions (25C; 60% RH), the DAAs (WebsterPak) were
stored for eight weeks under conditions that reflected a home-environment where DAAs
were stored blister-side up in a bathroom exposed to a standard 60W tungsten bulb and
indoor indirect daylight/ window- filtered sunlight; and a pharmacy-environment where
DAAs were stored blister-side up on a bench top exposed to fluorescent lighting and indoor
O
OH
N
H
C H
3
CH
3
O
NH
2
O N
H
C H
3
CH
3
O
NH
2
OH
CH
2
CONH
2
+
Quality Assurance and Management
226
indirect daylight. Photostability studies were also performed according to the ICH
guidelines (ICH, 1996). The results confirmed the drug content to be within the BP range of
95105% for all storage conditions, including the ICH light conditions. Although the
physical stability was confirmed by all tests, including weight uniformity, hardness,
friability, disintegration, dissolution, under both controlled and in-use conditions, the
exposure to light in the pharmacy and under ICH conditions, even after one week, resulted
in a yellow colouration of the tablets. The progressive yellow discolouration (Figure 4)
(Bowen, Mangan et al., 2007) of the tablets over an eight week storage period was attributed
to exposure to fluorescent lighting, which was not encountered under the home-
conditions. Although the colour change was noted as having negligible effects on the drug
content and other physical parameters, such as dissolution of the tablets, it was considered
an unacceptable change, since patients are likely to be concerned about a possible
compromise in the quality of the medicine, and this may have an adverse effect on patient
acceptance and hence adherence.
Fig. 4. Progression of colouration of frusemide tablets exposed to fluorescent lighting over
an eight week period from left (week 1) to right (week 8)
2.4.3 Prochlorperazine
Prochlorperazine, a phenothiazine drug, widely used as an anti-emetic is susceptible to
oxidation to the sulphoxide (a metabolite and a photodegradant) under the influence of
light (Figure 5). The main metabolites and degradants of all phenothiazines have been
found to be inactive at the dopamine receptors (Nejmeh & Pilpel, 1978; Moore & Tamat,
1980) and prochlorperazine is reported to cause photosensitivity effects in patients. A
study by Glass and colleagues (Glass, Mangan et al., 2009) reported on the
physicochemical stability of 5 mg prochlorperazine tablets (Stemetil, Sanofi-Aventis)
repackaged into a DAA (WebsterPak). In addition to the controlled room temperature
(25C; 60% RH) and accelerated (40C; 75% RH) storage conditions, tablets were also
exposed to an in-use condition by placing the repackaged DAAs blister-side up on a
bench top exposed to fluorescent lighting and indoor indirect daylight. The results
showed chemical and physical stability to be within BP limits (drug content within 95
105%) however, there were noticeable organoleptic changes in the tablets stored under the
in-use conditions, with a progressive grey discolouration over an eight week period,
starting in week 2. The discolouration and the potential for the resulting photodegradants
to cause adverse effects in patients suggest that the quality of this medicine had been
compromised.
Quality Assurance of Medicines in Practice
227
Fig. 5. Photodegradation of prochlorperazine
2.5 Repackaging medicines sensitive to oxidation
Only one study (Perks, Robertson et al., 2011) has reported on the stability of repackaging
medicines sensitive to oxidation, with preliminary findings suggesting that clozapine
undergoes a photo-oxidative process, since the coloration is not apparent during the
exposure period in the absence of light.
2.5.1 Clozapine
Clozapine is an atypical antipsychotic used in the treatment of schizophrenia. A study by
Perks and colleagues (Perks, Robertson et al., 2011) was prompted due to anecdotal reports
from hospital pharmacy practice about discolouration of returned clozapine tablets that
were repackaged into DAAs, and the known susceptibility of clozapine to oxidation
(Kohara, Koyama et al., 2002). The study evaluated both the chemical content and physical
stability of clozapine tablets (Clopine, Hospira, and Clozaril, Novartis) repackaged into a
DAA (WebsterPak) over a six week period. The DAAs were stored under two
environmental conditions, namely accelerated conditions (40C; 75% RH), and under a
simulated controlled room temperature condition (25C; 60% RH) by placing the DAA with
the blister-side facing up on a windowsill in the laboratory, with exposure to both window-
filtered sunlight and fluorescent light. The results were compared to control samples stored
in the original packaging under the above conditions. The study also investigated the
stability of the tablets exposed to ICH light conditions (ICH, 1996). Although the physical
stability, namely weight uniformity, hardness, friability, disintegration and dissolution, was
confirmed for all tests at room temperature, under accelerated conditions, the disintegration
test did not meet the BP requirements. However, the subsequent dissolution test was
successful with 85% of clozapine dissolving in 45 minutes. The chemical stability was
confirmed for all storage conditions, including under ICH conditions (for light), with
clozapine content within the BP range of 90110%.
N
N
N
S
C H
3
Cl
N
N
N
S
C H
3
Cl
O
N
N
N
S
C H
3
(OH)H
sulphoxidation
photo-substitution
/ reduction
Quality Assurance and Management
228
Based on the susceptibility to oxidation, and in order to reproduce the colouration noted in
the practice of repackaged samples returned by patients, a sample was removed from the
original manufacturers packaging and exposed to light and air on the bench beside the
simulated controlled room temperature condition samples (Figure 6) (Perks, Robertson et
al., 2011). The results for the exposed tablets confirmed the discolouration referred to in the
anecdotal reports from practice. These findings show that clozapine, when correctly
repackaged, maintained its physical and chemical stability for six weeks. It is therefore
assumed that these reports of tablet discoloration were as a result of improper handling of
these DAAs by patients. These findings highlight the importance of the role of the
pharmacist in providing patient care and advising on the correct handling and storage of
their DAAs.
Fig. 6. Photographic comparison of the colour of clozapine tablets from left to right: control
sample, sample stored in a DAA under simulated controlled room temperature conditions
after 6 weeks, and a sample left out of the DAA packaging on the windowsill after 6 weeks
(Clopine above and Clozaril below)
2.6 General guidelines for repackaging medicines
Various published guidelines, such as the Pharmaceutical Society of Australia (PSA)
Professional Practice Standards (PSA, 2010) and Dose Administration Aids Service
Guidelines and Standards for Pharmacists (PSA, 2007) have provided general guidance on
the suitability of repackaging of solid dosage (tablets and capsules) forms into DAAs and
are summarised in Table 2.
A flow chart for the quality management of DAAs in practice is shown in Figure 7
(Haywood, Llewelyn et al., 2011).
The following practical recommendations for ensuring the quality and stability of medicines
repackaged into DAAs arising from the above studies include: (i) selecting an appropriate
brand of DAA for repackaging medicines that affords appropriate protection against air and
moisture; (ii) protecting the DAA containing drugs susceptible to photodegradation from
light in the pharmacy and in patients homes, achieved by either storing the DAA protected
from light and/or placing the DAA into a light-protecting sleeve (e.g. foil, cardboard); (iii)
careful removal of tablets to prevent accidental rupture of adjacent blisters, thus exposing
tablets to air and moisture; (iv) monitoring the DAA integrity during repackaging,
dispensing and throughout the in-use period; (v) consideration of an appropriate location to
Quality Assurance of Medicines in Practice
229
store the DAA to avoid unnecessary exposure to light, heat, humidity and away from
children, if the device is not child-resistant; (vi) counselling patients on correct use and
appropriate storage locations for their DAA; and (vii) following appropriate professional
practice guidelines (Haywood, Llewelyn et al., 2011).
Medicines generally unsuitable for packing into DAAs include effervescent, dispersible,
buccal and sublingual tablets and significantly hygroscopic preparations.
Medicines administered on an as required basis are generally unsuitable for packing into
DAAs, since they may be taken unnecessarily on a regular basis or removed for use at an
earlier or later stage, thus exposing the remaining contents to the environment.
Cytotoxic preparations or other medicines posing occupational health and safety risks are
generally inappropriate, however the risk-benefit of packing must be considered; for
example, packing may be appropriate where non-adherence is considered to be a greater
risk.
Only devices that are well sealed and tamper evident should be used.
The length of time taken for the end-to-end packing process should be kept to a minimum;
tablets and capsules should be removed from the manufacturers foil or blister pack
immediately before the DAA is packed, and the DAA sealed immediately after it is
packed.
Any heat sealing methods should be used quickly and efficiently to minimise exposure of
medicines to heat, the likely storage conditions (e.g. exposure to heat, humidity, and
moisture) and the length of time the DAA will be in transit.
It is useful to maintain a list of medicines / medicine types that should not be removed
from their original pack for repacking in a DAA.
Table 2. Summary of PSA guidelines relating to the suitability of repackaging into DAAs
Fig. 7. DAAs Assuring quality in practice.
Choice of an appropriate DAA
1. DAA must be well sealed to protect against air and moisture.
Appropriate choice of medicine
1. Consult manufacturer information.
2. Cytotoxic, effervescent, dispersible, hygroscopic, sublingual or buccal
medicines are not recommended.
Counsel patients and carers
1. Store DAA protected from light, heat and humidity.
2. Monitor the integrity of the DAA.
3. Caution not to rupture adjacent blisters when removing tablets.
Quality Assurance and Management
230
3. Crushing tablets
The worlds population is ageing and many patients suffer from dysphagia either as a
consequence of disease or as part of the ageing process. Elderly patients are more prone to
diseases linked to dysphagia, such as Parkinsons and Alzheimers disease, other dementias,
stroke and cancer (Morris, 2005). Further, several age-related changes may contribute to
dysphagia, including a decline in salivary gland function resulting in xerostomia, and
changes in the sensory function of the aerodigestive tract such as a deterioration of the
pharyngo-upper esophageal sphincter (UES) and laryngo-UES contractile reflexes
(Kawamura, Easterling et al., 2004). Polypharmacy, involving the use of multiple medicines
at the same time, is common among older patients. Dysphagia therefore poses significant
challenges for medicine administration, since most adult medicines are available as mainly
solid dosage forms (i.e. tablets or capsules).
Tablets and capsules are commonly modified or altered for ease of administration, not only
in traditional care settings such as residential aged care facilities and in hospital wards, but
also by patients experiencing swallowing difficulties at home. Opening a capsule or
crushing a tablet before administration will in most cases render its use to be unlicensed. In
addition to the legal implications involved in modifying medicines, there are important
safety, stability and bioavailability considerations. Pharmacists thus have a role to play in
advising not only on safe medicine use but on any stability issues which may occur on
modifying oral solid dosage forms and thus contribute to improving the quality use of
medicines in older patients.
3.1 Medicines that should not be crushed
There are certain tablets and capsules that should not be modified. The potential risks
associated with crushing tablets and opening capsules and the impact on the API is
summarised in Table 3 (Haywood & Glass, 2009). Important considerations include
(Haywood & Glass, 2009):
Controlled or sustained release medicines are designed to release the active ingredient
in a controlled manner over a defined dosing period. Crushing or splitting these drug
products will interfere with the release characteristics and usually cause an unintended
large bolus dose resulting in toxicity and increased incidence of adverse effects. For
example, crushing sustained release verapamil (e.g. Veracaps SR) will result in an
increased risk of hypotension and bradycardia.
Enteric coating is used to protect the active ingredient from the acidic environment of
the stomach and film coating affords protection from light. Tablets, capsules and
capsule contents such as pellets can contain these coatings. For example, nifedipine (e.g.
Adalat) is extremely susceptible to light and even brief exposure to ambient light will
result in degradation of the API. Omeprazole (e.g. Losec) is degraded by exposure to
acid and whilst the tablets may be dispersed in yoghurt or orange juice, crushing such
tablets will expose the API to acid in the stomach resulting in a loss of activity before
the site of absorption in the upper small intestine.
Delayed release medicines are designed to release the API at a defined site in the
gastrointestinal tract. For example, mesalazine (e.g. Mesasal) is formulated as a resin
coated tablet designed to dissolve and release medication in the lower small intestine,
where it exerts a local anti-inflammatory effect.
Quality Assurance of Medicines in Practice
231
Enteric coated tablets, for example Cartia, are designed to minimise the irritant effect
of aspirin. If these tablets are crushed, they may be irritant to the oesophagus and the
stomach (upper gastrointestinal tract).
Sugar or film coats are designed to disguise APIs with an unacceptable taste. For
example, quinine (e.g. Quinate) is coated to disguise the bitter taste. Crushing these
tablets, although not altering their effectiveness, may compromise patient adherence.
There are occupational health and safety (OH&S) concerns with not only cytotoxic
medicines, but also teratogens (e.g. isotretinoin) and those medicines with the potential
to cause contact dermatitis (e.g. chlorpromazine). It is important to remember that the
clinical indications for the use of some cytotoxics extend beyond the treatment of
malignancy, for example, cyclophosphamide (e.g. Cycloblastin) and methotrexate (e.g.
Methoblastin) are used to treat some inflammatory disorders. Health care workers
and carers need to take appropriate measures to avoid exposure to the powder from
these crushed tablets.
Dosage forms that should not be crushed Potential risks
Extended/ sustained-release product Increased toxicity/ adverse effects
Enteric coat protecting an acid-labile API Decreased stability/ efficacy
Film coat protecting a light-sensitive API Decreased stability/ efficacy
Delayed-release coat designed to release API at a
defined site in the GIT
Decreased efficacy
Enteric coat protecting the upper GIT from the API Increased local irritant effect
Sugar/ film coat disguising a poor tasting API Unacceptable taste/ poor compliance
OH&S of cytotoxic/ teratogenic APIs
Potential hazards to health care
workers and careres
Table 3. Risks associated with modifying tablets and capsules
Information on the appropriateness of modifying oral solid dosage forms is available
through resources such as the approved product information and the CMI (Consumer
Medicine Information) of the medicine. Compiled lists of medicines that should not be
crushed or modified are available, such as the Handbook of Drug Administration via
Enteral Feeding Tubes (White & Bradnam, 2007), the Australian Pharmaceutical Advisory
Council (APAC) Guidelines for medication management in residential aged care facilities
(Appendix F) (APAC, 2002), the Australian Medicines Handbook (AMH) Aged Care
Companion (AMH, 2006) and electronic resources such as the list provided by the Institute
for Safe Medication Practices (Mitchell, 2011). Many hospitals and aged care facilities have
also developed their own lists. These lists, while providing a useful starting point, should
not be relied upon as being all inclusive.
3.2 General guidelines for safe medicine use when modifying medicines
Pharmacists are able to play an important role in educating patients, carers and other health
care professionals concerning the safe and effective administration of medicines. There are
reported cases of fatalities that have occurred, not only in traditional care settings, for
example where a patient was administered crushed controlled release tablets via a
nasogatric tube (Schier, Howland et al., 2003), but also in the patients home, where a patient
Quality Assurance and Management
232
chewed extended release diltiazem capsules, since they were too large to swallow (Ballard,
1996). This highlights the importance of patient counselling in a community setting, since
pharmacists may be unaware of the medication administration techniques and practices
adopted by patients at home.
The APAC guidelines for altering medicines (APAC, 2002) provide a six-step process,
summarised in Figure 8 (Haywood & Glass, 2009), to ensure that patients receive the desired
therapeutic response from their medicines.
Fig. 8. Six-step process to ensure desired therapeutic response
3.2.1 Medication management, monitoring and assessment
There are many important considerations when administering modified medicines, either
by the patient themselves at home, or with the assistance of carers or health care
professionals in hospitals and aged care facilities.
A patients swallowing ability should be carefully assessed since their ability to swallow
may be a transient disability or may vary during the day. Changing the dosing time and
renewed attempts to encourage taking unaltered dosage forms should be the first option,
whenever possible. Instinctively, most patients will tip their head backwards when
swallowing a tablet, but this actually narrows the oesophagus, making swallowing more
difficult. Patients should tilt their head down rather than back as this will widen the
oesophagus and may remedy difficulties in taking tablets. The use of liquid chasers or
swallowing tablets chased by a few bites of a well chewed banana or soft food (e.g. bread)
may be of assistance in some cases. Wherever possible patients should be upright, or as
close as practically possible to upright when taking oral medicines. Patients who are unable
1. Assessment of swallowing ability
2. Review of medication regimen
3. Which formulations should not be modified?
4. Suitable techniques for crushing
5. Administration of modified medicines
6. Monitoring and assessment
Quality Assurance of Medicines in Practice
233
to swallow may be able to take medicines that are not swallowed but are absorbed
sublingually (e.g. glyceryl trinitrate tablets) or sucked (e.g. amphotericin lozenges)
(Haywood & Glass, 2009).
Difficulties seen in swallowing oral medicines should provide a stimulus for a medication
review. Various options should be considered prior to modifying a medicine, including:
changing to a different formulation of the same medicine (e.g. oral liquids/drops,
dispersible tablets or transdermal patches); seeking a therapeutic alternative in an
appropriate dosage form; or stopping medicines that are no longer necessary. In cases where
a different formulation or therapeutic alternative is not available, and a sustained-release
product is prescribed, it may be necessary to administer an immediate-release preparation
more often, for example immediate release verapamil tablets are usually given three times a
day as opposed to once daily administration for the slow-release (SR) preparation, since
these preparations can usually be crushed and also more cost-effective. Monitoring and
assessing the therapeutic response is especially important when medicines are modified.
Adverse effects or lack of expected effects should trigger a review of this practice (Haywood
& Glass, 2009).
3.2.2 Techniques for crushing tablets
Appropriate equipment that is non porous and permits complete and reproducible
recovery of powdered material should be used, such as a mortar and pestle or appropriate
commercially available tablet crusher, to avoid dose inaccuracies. Equipment should be
washed and dried between uses to prevent cross contamination. Cytotoxic medicines
should have a dedicated set of equipment and special procedures must be adopted to
minimise occupational exposure, for example a mortar and pestle enclosed in a
transparent plastic bag with the operator wearing a mask and gloves (Haywood & Glass,
2009). Mixing powdered material with a small amount of food that the patient likes (e.g.
jams, fruit purees) is sensible as it disguises unpleasant taste and aids in compliance. The
crushed tablets or capsule contents should be given to the patient as soon as possible after
crushing and mixing with any food or liquid, as this will minimise both the risk of
medication degradation and, in an aged care setting, inadvertent administration to the
wrong resident. Crushed tablets or contents of capsules should not be sprinkled onto
meals where portions of the meal may be left uneaten, resulting in under dosing. Further
practical guidelines to assist in safely modifying medicines are described by Haywood et
al (Haywood & Glass, 2009).
3.2.3 Counseling and continuing education
It is important for pharmacists to develop and maintain a current list that is specific to their
practice setting and is readily accessible to staff involved in patient counselling or
administration of modified medicines. However, with the frequent addition of new
medicines to the market and the challenge of maintaining an all-inclusive list, it is more
important to educate patients, carers, staff and other health care professionals about safe
medicine use and to provide them with a background concerning the safety and stability
considerations of modifying medicines to ensure the quality use of medicines so that
patients receive the best possible therapeutic outcome (Haywood & Glass, 2009).
Quality Assurance and Management
234
4. Oral liquids in practice
The pharmacist, both in community and hospital pharmacy practice, is often challenged
with the preparation of a liquid dosage form not available commercially for paediatric
patients, those adults unable to swallow tablets or capsules, patients who must receive
medications via nasogastric or gastrostomy tubes, and patients who require non-standard
doses that are more easily and accurately measured by using a liquid formulation. It is
common practice for these liquid dosage forms to be prepared from a commercially
available solid dosage form such as a tablet/capsule. Although a number of parameters
need to be considered in the formulation of a stable liquid dosage form, there is limited
formulation and stability data available (Glass & Haywood, 2006).
4.1 Compounding pediatric mixtures
Children often require titratable individualised doses in milligrams per kilogram of body
weight and most children under six years of age cannot swallow tablets (Nahata & Morosco,
2003). There are a limited number of suitable dosage forms commercially available for
children due to the size of the market and resulting lack of financial viability for the
pharmaceutical industry of these liquid dosage forms. In addition, there are complexities
associated with the formulation of liquid dosage forms due to various physicochemical
factors. The preparation of extemporaneous oral liquids, by pharmacists, recently reviewed
by Nahata (Nahata & Allen, 2008) and Giam (Giam & McLachlan, 2008), therefore provides
an appropriate solution to this problem. The following sections provide information on the
preparation of safe, stable oral liquids for children and adults in those cases where suitable
dosage forms are not available.
4.2 Physicochemical stability considerations in compounding oral liquids
Drug stability encompasses chemical, physical, microbiological, therapeutic and
toxicological stability not only of the drug substance, but when taking account of the
excipients, also the drug product. The extemporaneous preparation of oral liquids can be
complex due to the addition of excipients to improve compliance or the stability of the final
product. Further, if oral liquids are prepared from a commercially available solid dosage
form such as a tablet or capsule, there may be potential interactions between the drug and
the excipients (in the commercial product) in the prepared oral liquid. Such interactions may
involve the vehicle, preservative, buffering agent, flavouring agent, wetting and suspending
agent, viscosity enhancer or even the storage container. However, a review in 2006 of 83 oral
liquids extemporaneously prepared by modifying an existing commercial dosage form
revealed that only 7.2% of those compounded oral liquids exhibited stability concerns (Glass
& Haywood, 2006). This review is a useful comprehensive summary of liquid dosage forms
prepared from commercially available tablets or capsules and illustrates the low risk
associated with these products, if cognisance is taken not only of the API but all those
excipients present in the commercial dosage form, used in their preparation.
4.2.1 Active ingredient and excipients
In most practice settings, sourcing the API as a powdered raw material is not always
practical and thus commercially available tablets and capsules are often used in
Quality Assurance of Medicines in Practice
235
compounding oral liquids. These solid dosage forms however contain many excipients,
which although compatible in the solid state have the potential to interact both in solution
or suspension, adversely affecting the potency of the API and thus impacting on the shelf-
life of the compounded oral liquid. There are also certain tablets that should not be crushed
and these are detailed in section 3 above. Excipients used in extemporaneous oral liquids
commonly include suspending agents or viscosity enhancers, sweeteners and preservatives.
They may also contain flavours, colours and buffers. It is not always necessary to colour a
product. If a colouring agent is used, it should match the flavour (e.g. red for cherry) and
should be used in minimal quantities to produce light-moderate density colours. The
Therapeutics Goods Administration (TGA) has a recently updated list of colourings
permitted in oral medicines (TGA, 2011). Mixtures may be required to be buffered to an
optimum pH, or pH might need to be taken into account when using certain preservatives
(e.g. benzoic acid) which require an acidic pH to be effective. Commercial liquid vehicles,
that contain a combination of sweeteners, flavours, viscosity enhancers or suspending
agents and preservatives are available. Some contain non-nutritive sweeteners and are
therefore suitable for diabetic patients. Many stability studies are available in the literature
that utilise these commercial liquid vehicles, thereby making them a convenient resource,
especially since various practice settings may not hold a wide variety of excipients in stock
(Haywood & Glass, 2010).
4.2.2 Designing an oral liquid formulation
Pharmacists should be encouraged to use the following process to assist in the
compounding of safe, stable oral liquids (Figure 9) (Haywood & Glass, 2010). In the absence
of existing commercially available dosage forms or therapeutic alternatives in a suitable
dosage form, a compounded oral liquid is best prepared by searching for a suitable formula.
It is important that the stability of these compounded oral liquids is evaluated by methods
of analysis that are stability-indicating (Prankerd, 2009). Examples of Journals containing
stability-indicating methods of analysis include: Journal of Pharmacy Practice and Research,
International Journal of Pharmaceutical Compounding, and the Journal of American Health-System
Pharmacists. However, a suitable search engine will provide results from a wider range of
journals. For example Medline (http://www.ncbi.nlm.nih.gov/pubmed) and Google scholar
(http://scholar.google.com.au/schhp?hl=en&tab=ws) are free-access online search engines.
Useful texts include: Allens Compounded Formulations (Allen, 2003), Paediatric Drug
Formulations (Nahata, Pai et al., 2004), Stability of Compounded Formulations (Trissel,
2009), however it is important to check whether there is evidence for the stability of these
formulations (Haywood & Glass, 2010).
Should no suitable formula be available in the literature, pharmacists may be required to
design a formula from first principles. Designing an oral liquid, using sound scientific
principles, is a lengthy process and would require careful consideration of a number of
factors including: potential degradation of the active API by pathways such as oxidation,
hydrolysis, photolysis or thermolysis; storage, preservation and packaging considerations
and assigning a suitable shelf-life to the formulation; and interactions between excipients
and the API, especially if tablets or capsules are used as the source. The manufacturer of the
solid dosage form may be able to provide useful stability data for the API. Generally, a
commercial liquid vehicle would be the preferred choice, since it would contain all the
Quality Assurance and Management
236
necessary excipients to formulate the oral liquid. It is also preferable to obtain the API in
pure powder form as opposed to using a commercial product, since the excipients in the
commercial product will add to the complexity of the final product. The final product
should be packaged in a light-resistant container (since many colours and flavours are
sensitive to light) with a child-resistant cap and be appropriately labelled (Haywood &
Glass, 2010).
Fig. 9. Compounding safe, stable oral liquids.
4.2.3 Caution when modifying existing formulae
Because of the ability of excipients in tablets and capsules to interact with the API in the
liquid dosage form, there are problems associated with using stability data for an oral liquid
made from powdered raw material and in making the assumption that oral liquids prepared
from commercial tablets or capsules will have comparable stability and thus shelf life. This
was demonstrated in a study investigating the stability of an isoniazid (INH) liquid
prepared using commercially available tablets and a British Pharmaceutical Codex (BPC)
formula, where significant degradation of the INH ( 10 % after 3 days at both 4 and 25 C)
was shown whereas the control (using pure INH powder) retained the desired stability of >
90 % after 30 days, as specified in the BPC, under identical conditions (Haywood, Mangan et
al., 2005). A replicate control formulation spiked with lactose (an excipient present in the
commercial tablets), produced similar degradation profiles to that of the compounded oral
liquid. INH is susceptible to hydrolysis and oxidation and is known to interact with
reducing sugars (e.g. lactose), to form hydrazines (Figure 10). Although the BPC claimed 28
days stability for the extemporaneously prepared INH mixture, the use of INH powder, as
opposed to INH tablets, was specified. This highlights the importance of considering not
only the stability of the API but also the potential for interaction with excipients when
modifying existing formulae.
Is there a suitable commercially available product?
Is there a therapeutic alternative available in a suitable dosage form?
Is there a published formula for a compounded oral liquid?
Compendia
Journals
Reference Texts
Design a formula from first principles
Quality Assurance of Medicines in Practice
237
Fig. 10. Degradation of isoniazid in the presence of lactose.
The stability of a drug substance in an extemporaneous oral liquid can be compromised by
the addition of excipients. When considering the safety and efficacy of oral liquids prepared
extemporaneously, it is important to consider not only the stability of the API but the entire
formulation. Pharmacists are to be encouraged that by considering various factors such as
drug stability, mechanisms and pathways of degradation, potential interactions with
excipients in the tablets or capsules, and the availability of formulae (including methods and
materials) for stable liquid dosage forms for oral administration in the literature, they are
able to confidently dispense an oral liquid dosage form. However, clinical experience,
including an assessment of bioavailability whenever possible, with extemporaneous liquid
dosage forms for oral administration should be reported in the literature to further support
health professionals in this important area of practice.
5. Repackaging and storage of medicines in developing countries
Solid dosage forms such as tablets are commonly procured in bulk and repackaged in
developing countries in order control costs and therefore to ensure that governments are
able to provide medicines to a large majority of the population. This repackaging process
involving removal the drug from its primary packaging invalidates the stability guarantee
of the manufacturer and often involves the transfer of the tablets to a small bank bag
which may be clear, opaque white, yellow, brown or red and manufactured from
polyvinylchloride (Figure 11). Although the pharmaceutical industry is required to assure
the stability of drugs under certain conditions of temperature light and humidity, these
conditions may not be inclusive of in-use conditions. These in-use conditions may relate to
accelerated temperature, light and humidity conditions, but may also simply be due to the
fact that a request to store a drug product under refrigerated conditions cannot be adhered
to in the a developing country, due to the patient simply not having access to a refrigerator.
Fig. 11. Examples of Bank Bags (re-sealable polyethylene bags for dispensing tablets)
Stripform Packaging.
O
CH
2
OH
OH
OH
O
OH
CH
2
OH
OH
OH
O
OH
N
O N
H
N H
2
+
1-isonicotinoyl-2-lactosylhydrazine
Quality Assurance and Management
238
5.1 In-use stability guidelines
Although the ICH Guideline on Photostability (ICH, 1996), describes a protocol for testing
the stability to light of both the drug substance and drug product, it fails to provide a
protocol for photostability testing under patient in-use conditions. Since this guideline was
published in 1996 and has been implemented in the US, EU and Japan and the
Pharmaceutical Industry has experience in these testing procedures, it has been suggested
by Baertschi et al (Baertschi, Alsante et al., 2010), that the time has come to revise these
guidelines to accommodate in-use conditions. Although the aim of photostability testing is
that it should show that exposure to light does not result in an unacceptable change in both
the drug substance and the drug product, by excluding any in-use testing the quality of the
product to the end consumer, the patient could be compromised. Figure 12 represents a
sequential testing which provides some recommendations as to those drug substances and
products which are not included in the guideline such as topical agents e.g. creams,
transdermal patches and intravenous preparations. There is however no reason why this
should not be extended to the repackaging of oral solid dosage forms such as tablets and
capsules and apply to all stability testing protocols, including in addition to light,
appropriate in-use conditions of temperature and humidity. Lagrange has concurred with
the findings by Baertschi et al, in a review on the current perspectives on the repackaging of
solid oral dosage forms and stability implications for this process (Lagrange, 2010).
Recognising the lack of availability of stability data, they are proposing that factors such as
the barrier properties of the packaging materials, the hygroscopicity and light sensitivity of
drug molecules and any pre-formulation stability data should be used to generate a list of
drugs which should not be repackaged. Because of the advantages associated with the
repackaging of drugs into compliance aids, they do recommend that it is the pharmacist
who is required to assess the risk of this process.
Fig. 12. Sequential photostability testing protocol
5.2 Risks and benefits associated with repackaging in developing countries
The obvious benefits associated with repackaging of medicines in developing countries are
that of cost-reduction due to bulk purchases of drug products. However the risks associated
with repackaging reported in the literature have to a large extent been centred on issues
STEP 1: Is the medicine stable when exposed to light unpacked if YES to STEP 2
STEP 2: Is the medicine stable when exposed to light in primary pack if YES to Step 3
STEP 3: Is the medicine stable when exposed to light in secondary pack if YES to Step 4
STEP 4: Do not transfer to a less protective pack in community/hopsital pharmacy practice
Quality Assurance of Medicines in Practice
239
other than drug quality in terms of stability considerations and include (Leon Villar, Iranzo
Fernandez et al., 2001; Kelly & Vaida, 2003): (i) medication errors in the repackaging of
medicines; (ii) high cost of repackaging low-quantity prescriptions, which might lead to
greater cost due to damage of the packaging by typing directly onto the label; and (iii)
expiry dates may be extended beyond what is safe for the patient. Strategies may be
implemented in order to avoid repackaging errors, including training pharmacy staff on
safety issues, and storage and labelling of drug products in the pharmacy, also referred to as
the design of a quality control line. The United States Pharmacopoeia (USP) standards on
packaging of drug products, expiry dates and monitoring of temperature conditions have
also been revised (Obeke, Bailey et al., 2000).
5.3 Repackaging of light-sensitive medicines
Three drug products (tablets) have been evaluated in terms of their stability to light when
repackaged in various bank bags. Frusemide and chlorpromazine are known to be light
sensitive (Bundgaard, Nrgaard et al., 1988; Chagonda & Millership, 1989), while
pyrazinamide, exhibits good stability and is frequently repackaged into bank bags in
developing countries for the treatment of patients with tuberculosis.
5.3.1 Frusemide and chlorpromazine
Frusemide tablets placed in a white opaque polyvinyl bag, the original blister (red) packing
and in a white opaque securitainer were exposed to window-filtered sunlight under
ambient temperature (25-40 C) conditions for 10 days (Soneman, 1995). Both the appearance
of the tablets and the drug content (using a validated HPLC method) was monitored. In all
cases discoloration of the tablets, similar to that observed on repackaging of these tablets
into a DAA of these tablets was noted. The percentage decrease in the frusemide content
was 14.49%, 12.73% and 21.27% respectively, with further investigation revealing that
temperature played a significant role in accelerating the photodegradation of the
repackaged frusemide. Recommendations were that patients be counselled on the storage of
repackaged frusemide tablets. Chlorpromazine similarly exposed to window filtered
sunlight under ambient conditions in a white opaque polyvinyl bag, discolored, with only
76% of the drug remaining after the exposure period of 1 month (Jacobsen, 1997). For
chlorpromazine it was recommended that in addition to counseling on storage of tablets to
be protected from light, that tablets would be repackaged bi-monthly.
5.3.2 Pyrazinamide
Since pyrazinamide is commonly repackaged into bank bags, the effect of exposure to
window-filtered sunlight for 3 days in both a yellow bag commonly used in clinical
practice and a brown bag was investigated. For both bags tested, photodegradation of
pyrazinamide was noted with the extent of degradation dependant both on the time of
exposure and the type of bag. Results indicated that pyrazinamide was most stable in the
brown bag, with 95% of the drug remaining while in the yellow bag 8% of the drug
degraded. Although the protection offered by the brown bag was superior, its use was
limited in practice due to lack of aesthetic appeal and patient acceptance (Defferary, 1993).
Quality Assurance and Management
240
5.4 Repackaging moisture-sensitive medicines
Some moisture sensitive drugs, because of their hygroscopicity absorb moisture resulting in
tablets becoming unusable, due to loss of physical form. However there are instances where
the absorption of moisture by drugs may cause a polymorphic transition and as result
altered drug dissolution and bioavailability, which has the potential to seriously
compromise the quality of the drug product.
5.4.1 Carbamazepine
The antiepileptic drug carbamazepine has the ability to lose its effectiveness when exposed
to moisture due to a transformation from the anhydrous form to the dihydrate, which
although thermodynamically stable is less soluble and thus less bioavailable (al-Zein, Riad
et al., 1999). A study investigated the effect of repackaging of carbamazepine tablets into
white opaque bank bags stored under ambient (25C; 60% RH), accelerated (40C; 75% RH)
and light (window-filtered sunlight) conditions for 30 days (Maharaj, 1997). Results from
this study however confirmed both the chemical and physical stability of the repackaged
carbamazepine tablets, under all storage conditions and thus the integrity of the bank bag.
6. Conclusion
This chapter highlights that despite the rigor of the requirements for the pharmaceutical
industry to provide quality medicines, there are a number of factors which have the ability
to contribute to the patient receiving a medicine, which is not of an appropriate quality. This
research confirms the role of health professionals especially pharmacists, because of their
specialist knowledge in medicines of being able to contribute substantially to ensuring the
quality of medicines for patients. It also raises the question as to whether we should be
looking more closely at not only undertaking more research independently into in-use drug
stability, but adding to the requirements for in-use stability testing to be undertaken on
medicines by the pharmaceutical industry.
7. Acknowledgment
The authors wish to acknowledge James Cook University, Griffith University and Dr Sherryl
Robertson, Mrs Martina Mylrea and Ms Victoria Llewelyn.
8. References
al-Zein, H., Riad, L. E. & Abd-Elbary, A. (1999). Effect of packaging and storage on the
stability of carbamazepine tablets. Drug Dev Ind Pharm Vol.25, No.2, pp. 223-227
Allen, L. V. J. (2003). Allen's compounded formulations: the complete US pharmacist collection,
Washington DC, American Pharmaceutical Association
AMH (2006). Australian medicines handbook. Drug Choice Companion: Aged Care, 2nd ed, ISBN
9780980579031, Adelaide, Australian Medicines Handbook Pty Ltd
Andrisano, V., Gotti, R., Leoni, A. & Cavrini, V. (1999). Photodegradation studies on
Atenolol by liquid chromatography. Journal of Pharmaceutical and Biomedical Analysis
Vol.21, No.4, pp. 851-857
Quality Assurance of Medicines in Practice
241
Annemans, L., Wittrup-Jensen, K. & Bueno, H. (2010). A review of international
pharmacoeconomic models assessing the use of aspirin in primary prevention.
Journal of Medical Economics Vol.13, No.3, pp. 418-427
APAC (2002). Australian Pharmaceutical Advisory Council. Guidelines for medication management
in residential aged care facilities, 3rd ed, ISBN 0-642-82113-5, Canberra,
Commonwealth of Australia
Aryal, S. & Skalko-Basnet, N. (2008). Stability of amlodipine besylate and atenolol in multi-
component tablets of mono-layer and bi-layer types. Acta Pharmaceutica Vol.58,
No.3, pp. 299-308
Aulton, M. E. (2007). Aulton's Pharmaceutics. The Design and Manufacture of Medicines, ISBN
978-0-443-10108-3, Edinburgh, Churchill Livingstone
Australian_Government (2010). The Fifth Community Pharmacy Agreement between the
Commonwealth Government and the Pharmacy Guild of Australia. 7 July 2011,
Available from
http://www.5cpa.com.au/iwov-
resources/documents/The_Guild/PDFs/Other/Fifth%20Community%20Pharmac
y%20Agreement.pdf
Baertschi, S. W., Alsante, K. M. & Tonnesen, H. H. (2010). A critical assessment of the ICH
guideline on photostability testing of new drug substances and products (Q1B):
Recommendation for revision. Journal of Pharmaceutical Sciences Vol.99, No.7, pp.
2934-2940
Ballard, D. (1996). Reminder of danger from chewing extended-release products. American
Journal of Health-System Pharmacy Vol.53, No.16, pp. 1962, 1964
Bowen, L., Mangan, M., Haywood, A. & Glass, B. D. (2007). Stability of frusemide tablets
repackaged in Dose Administration Aids. Journal of Pharmacy Practice and Research
Vol.37, No.3, pp. 178-181
Bundgaard, H., Nrgaard, T. & Nielsen, N. M. (1988). Photodegradation and hydrolysis of
furosemide and furosemide esters in aqueous solutions. International Journal of
Pharmaceutics Vol.42, No.1, pp. 217-224
Chagonda, L. F. & Millership, J. S. (1989). The determination of chlorpromazine, related
impurities and degradation products in pharmaceutical dosage forms. Journal of
Pharmaceutical and Biomedical Analysis Vol.7, No.3, pp. 271-278
Chan, K., Swinden, J. & Donyai, P. (2007). Pilot study of the short-term physico-chemical
stability of atenolol tablets stored in a multi-compartment compliance aid. European
Journal of Hospital Pharmacy Science Vol.13, No.3, pp. 60-66
Church, C. & Smith, J. (2006). How stable are medicines moved from original packs into
compliance aids? The Pharmaceutical Journal Vol.276, pp. 75-81
Defferary, L. A. (1993). A stability study of pyrazinamide solid dosage forms. Port Elizabeth,
South Africa, University of Port Elizabeth. Honours Thesis (BPharm).
Giam, J. A. & McLachlan, A. J. (2008). Extemporaneous product use in paediatric patients: A
systematic review. International Journal of Pharmacy Practice Vol.16, No.1, pp. 3-10
Glass, B., Mangan, M. & Haywood, A. (2009). Prochlorperazine tablets repackaged into dose
administration aids: can the patient be assured of quality? Journal of Clinical
Pharmacy and Therapeutics Vol.34, No.2, pp. 161-169
Quality Assurance and Management
242
Glass, B. D. & Haywood, A. (2006). Stability considerations in liquid dosage forms
extemporaneously prepared from commercially available products. Journal of
Pharmacy and Pharmaceutical Sciences Vol.9, No.3, pp. 398-426
Glass, B. D., Haywood, A., Llewelyn, V. & Mangan, M. (2009). Compliance aids and
medicine stability: new evidence of quality assurance. Current Drug Safety Vol.4,
No.1, pp. 74-78
Haywood, A. & Glass, B. D. (2009). Dosage form modification for the elderly. Australian
Pharmacist Vol.28, No.11, pp. 960-964
Haywood, A. & Glass, B. D. (2010). Paediatric mixtures. Australian Pharmacist Vol.29, No.4,
pp. 316-330
Haywood, A., Llewelyn, V., Robertson, S., Mylrea, M. & Glass, B. (2011). Dose
administration aids: Pharmacists role in improving patient care. Australasian
Medical Journal Vol.4, No.4, pp. 183-189
Haywood, A., Mangan, M. & Glass, B. D. (2006). Stability implications of repackaging
paracetamol tablets into Dose Administration Aids. Journal of Pharmacy Practice and
Research Vol.36, No.1, pp. 21-24
Haywood, A., Mangan, M., Grant, G. & Glass, B. D. (2005). Extemporaneous Isoniazid
mixture: stability implications. Journal of Pharmacy Practice and Research Vol.35,
No.3, pp. 181-182
ICH (1996). ICH Harmonised Tripartite Guideline. Stability Testing: Photostability testing of
new drug substances and products Q1B: ICH Steering Committee, 7 July 2011,
Available from
http://www.ich.org/fileadmin/Public_Web_Site/ICH_Products/Guidelines/Qua
lity/Q1B/Step4/Q1B_Guideline.pdf
ICH (2003). ICH Harmonised Tripartite Guideline. Stability Testing of New Drug
Substances and Products Q1A(R2): ICH Steering Committee. 7 July 2011, Available
from
http://www.ich.org/fileadmin/Public_Web_Site/ICH_Products/Guidelines/Qua
lity/Q1A_R2/Step4/Q1A_R2__Guideline.pdf
Jacobsen, L. J. (1997). A study into the effect of packaging on the stability of chlorpromazine
tablets. Grahamstown, South Africa, Rhodes University. Honours Thesis (BPharm).
Kawamura, O., Easterling, C., Aslam, M., Rittmann, T., Hofmann, C. & Shaker, R. (2004).
Laryngo-upper esophageal sphincter contractile reflex in humans deteriorates with
age. Gastroenterology Vol.127, No.1, pp. 57-64
Kelly, K. & Vaida, A. J. (2003). Warning! - Repackaged substances may easily be confused.
Pharmacy Times Vol.69, No.5, pp. 30-32
Kohara, T., Koyama, T., Fujimura, M., Tanaka, H., Maeda, J., Fujimoto, T., Yamamoto, I. &
Arita, M. (2002). Y-931, a novel atypical antipsychotic drug, is less sensitive to
oxidative phenomena. Chemical and Pharmaceutical Bulletin (Tokyo) Vol.50, No.6, pp.
818-821
Lagrange, F. (2010). Current perspectives on the repackaging and stability of solid oral
doses. Annales Pharmacetiques Francaises Vol.68, No.6, pp. 332-358
Lee, J. K., Grace, K. A. & Taylor, A. J. (2006). Effect of a pharmacy care program on
medication adherence and persistence, blood pressure, and low-density lipoprotein
cholesterol: a randomized controlled trial. The Journal of the American Medical
Association Vol.296, No.21, pp. 2563-2571
Quality Assurance of Medicines in Practice
243
Leon Villar, J., Iranzo Fernandez, M. D., Ventura Lopez, M., Najera Perez, M. D. & Victorio
Garcia, L. (2001). Lnea de Control de Calidad en el reenvasado de medicamentos.
Bases metodolgicas. Diseo. Utilidad. Farmacia Hospitalaria Vol.25, No.1, pp. 31-37
Llewelyn, V. K., Mangan, M. F. & Glass, B. D. (2010). Stability of sodium valproate tablets
repackaged into dose administration aids. Journal of Pharmacy and Pharmacology
Vol.62, No.7, pp. 838-843
Maharaj, S. (1997). Carbamazepine tablets: An in-use stability evaluation. Grahamstown,
South Africa, Rhodes University. Honours Thesis (BPharm).
Marriott, J. L. & Nation, R. L. (2002). Splitting tablets. Australian Prescriber Vol.25, No.6, pp.
133-135
Mitchell, J. F. (2011). Oral dosage forms that should not be crushed. Institute for Safe
Medication Practices, 7 July 2011, Available from
www.ismp.org/tools/donotcrush.pdf
Moore, D. E. & Tamat, S. R. (1980). Photosensitization by drugs: photolysis of some chlorine-
containing drugs. Journal of Pharmacy and Pharmacology Vol.32, No.3, pp. 172-177
Morris, H. (2005). Administering drugs to patients with swallowing difficulties. Nursing
Times Vol.101, No.39, pp. 28-30
Nahata, M. C. & Allen, L. V., Jr. (2008). Extemporaneous drug formulations. Clinical
Therapeutics Vol.30, No.11, pp. 2112-2119
Nahata, M. C. & Morosco, R. S. (2003). Stability of tiagabine in two oral liquid vehicles.
American Journal of Health-System Pharmacy Vol.60, No.1, pp. 75-77
Nahata, M. C., Pai, V. B. & Hipple, T. F. (2004). Pediatric drug formulations. 5th ed., Cincinnati
Nejmeh, M. & Pilpel, N. (1978). The effect of the photodecomposition of chlorpromazine on
lecithin monolayers. Journal of Pharmacy and Pharmacology Vol.30, No.12, pp. 748-753
Nunney, J. M. & Rayner, D. K. T. (2001). How are multi-compartment compliance aids used
in primary care? The Pharmaceutical Journal Vol.267, pp. 784-789
Obeke, C. C., Bailey, L., Medwick, T. & Grady, L. T. (2000). Revised USP standards for
product dating, packaging, and temperature monitoring. American Journal of Health-
System Pharmacy Vol.57, No.15, pp. 1441-1445
Perks, S., Robertson, S., Haywood, A. & Glass, B. D. (2011). Clozapine Repackaged into Dose
Administration Aids: A Common Practice in Australian Hospitals. International
Journal of Pharmacy Practicepp. (in press)
Prankerd, R. J. (2009). Compounded products - Stability studies in Hospital Pharmacy
departments. Journal of Pharmacy Practice and Research Vol.39, No.1, pp. 5-7
PSA (2007). Pharmaceutical Society of Australia. Guidelines and standards for pharmacists.
Dose Administration Aids Service. 7 July 2011, Available from
http://www.psa.org.au/site.php?id=2065
PSA (2010). Professional Practice Standards. Version 4. Standard 7: Dose Administration Aids
Service, Pharmaceutical Society of Australia
RPSGB (2003). Medicines, Ethics, and Practice: A Guide for Pharmacists, Volume 27, ISSN 0955-
4254, London, Royal Pharmaceutical Society of Great Britain
Schier, J. G., Howland, M. A., Hoffman, R. S. & Nelson, L. S. (2003). Fatality from
administration of labetalol and crushed extended-release nifedipine. The Annals of
Pharmacotherapy Vol.37, No.10, pp. 1420-1423
Quality Assurance and Management
244
Simmons, D., Upjohn, M. & Gamble, G. D. (2000). Can medication packaging improve
glycemic control and blood pressure in type 2 diabetes? Results from a randomized
controlled trial. Diabetes Care Vol.23, No.2, pp. 153-156
Soneman, L. J. (1995). Evaluation of the relative light stability of furosemide when packed in
blister packs, securitainers and approved bank bags. Grahamstown, South Africa,
Rhodes University. Honours Thesis (BPharm).
TGA (2011). Therapeutic Goods Administration. Colourings Permitted in Medicines for Oral
Use. 7 July 2011, Available from http://www.tga.gov.au/industry/cm-colourings-
oral-use.htm
Trissel, L. A. (2009). Trissel's Stability of Compounded Formulations. 4th ed, Washington, DC,
American Pharmacists Association
USP (2010). US Pharmacopeial Convention Inc. US Pharmacopeia 33 - National formulary 28
<681> Repackaging into single-unit containers and unit-dose containers for
nonsterile solid and liquid dosage forms.
Walker, R. (1992). Stability of medicinal products in compliance devices. The Pharmaceutical
Journal Vol.25, pp. 124-126
Ware, G. J., Holford, N. H., Davison, J. G. & Harris, R. G. (1994). Unit-of-issue medicine
administration: time and cost-benefits in a geriatric unit. Australian Journal of
Hospital Pharmacy Vol.24, No.4, pp. 329-332
White, R. & Bradnam, V. (2007). Handbook of Drug Administration via Enteral Feeding Tubes,
ISBN 978-0-85369-928-6, London, Pharmaceutical Press
14
Patterns of Medical Errors:
A Challenge for Quality Assurance
in the Greek Health System
Athanassios Vozikis and Marina Riga
University of Piraeus, Athens
Greece
1. Introduction
A widely accepted definition of quality, as given by the Institute of Medicine is: The degree
to which health services for individuals and populations increase the likelihood of desired
health outcomes and are consistent with current professional knowledge (Lohr, 1990).
According to other definition, quality is conceptually complex and represents a synthesis of
lessons, methods and acquired knowledge from a range of disciplines (Dalrymple & Drew,
2000). So, we can realize that the subject of quality in healthcare organisations has been the
object of numerous attempts at quick fixes. Thus, quality management in various types of
heath services organizations is an important issue to improve the quality and safe patient
care, promote quality patient and organizational outcomes and in general to improve health
(Kelly, 2006).
For delivering quality in a heath care system, we should deal with six areas dimensions of
quality (World Health Organization [WHO], 2006). These dimensions are:
- effective, delivering health care that is adherent to an evidence base and results in
improved health outcomes for individuals and communities, based on need;
- efficient, delivering health care in a manner which maximizes resource use and avoids
waste;
- accessible, delivering health care that is timely, geographically reasonable, and provided
in a setting where skills and resources are appropriate to medical need;
- acceptable/patient-centred, delivering health care which takes into account the preferences
and aspirations of individual service users and the cultures of their communities;
- equitable, delivering health care which does not vary in quality because of personal
characteristics such as gender, race, ethnicity, geographical location, or socioeconomic
status;
- safe, delivering health care which minimizes risks and harm to service users.
Although error is inherent in all fields of human activity, it is however possible health
professionals to learn from mistakes and prevent their reoccurrence and that health-care
providers and organisations that have achieved a high level of safety have the capacity to
acknowledge errors and learn from them.
Quality Assurance and Management
246
Patients should participate in decisions about their health care, and recognising that those
working in health-care systems should provide them with adequate and clear information
about potential risks and their consequences, in order to obtain their informed consent to
treatment.
Noting, also, the relevance of the World Health Organisation (WHO) Health for All
targets for the European Region (target 2) and of its policy documents on improving health
and quality of life and having regard to its Health Assembly Resolution 55.18 (2002) on
Quality of care: patient safety, which recognises the need to promote patient safety as a
fundamental principle of all health systems.
Considering, thus, that patient safety is the underpinning philosophy of quality
improvement and that all possible measures should therefore be taken to organise and
promote patient-safety education and quality of health-care education (Council of Europe
[C.E.], 2006).
For years, experts have recognized that medical errors exist and compromise health care
quality, but the response to the November 30, 1999, release of the Institute of Medicines
(IOM) report, To Err is Human: Building a Safer Health System, brought medical errors to the
forefront of public attention (Institute of Medicine [IOM], 1999). In March 2001, the second
IOM report, Crossing the Quality Chasm: A New Health System for the 21st Century, was
published (IOM, 2001). The chasm report extends the findings of the error report to other
important dimensions of healthcare quality.
The reports concluded that the majority of these errors were the result of systemic problems
rather than poor performance by individual providers, and outlined a four-pronged
approach to prevent medical mistakes and improve patient safety. Much has been written
worldwide about medical errors and improvements in their reporting and handling since
then.
Recently, the Euro barometer survey, which was released by the European Commission
(E.C., 2005) found that almost half of those surveyed said that hospital patients should be
worried about being victims of medical errors.
In this research paper, we present various patterns of medical errors in Greece, after the
analysis of 141 cases coming from administrative courts awards and Greek Ombudsmans
reports for the years 2000 to 2007. We also present some of the current activities, as well as
recommendations for additional activities to reduce errors through increased awareness of
medical errors.
In the following sections 2 and 3, the definitions, classifications and epidemiology and root
causes of adverse events and medical errors are given.
In sections 4 and 5, the measurement process and tools, as well as the underreporting factors
of medical errors are presented.
In section 6, we present our research findings and finally, in section 7, we discuss our
findings and we propose additional policies to reduce errors through increased awareness
of medical errors.
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
247
2. Definitions, context and classifications
2.1 Definitions and context
The lack of standardized nomenclature and a universal taxonomy for adverse events and
medical errors complicates the development of a response to the issues outlined in this
paper. A number of definitions have been applied to medical errors and patient safety.
The World Health Organization (WHO) Collaborating Centres for International Drug
Monitoring defines an adverse drug event as follows (WHO, 1984):
Noxious and unintended and occurs at doses used in man for prophylaxis, diagnosis, therapy, or
modification of physiologic functions.
In To Err is Human, the IOM (1999) adopted the following definitions:
An error is defined as the failure of a planned action to be completed as intended or the use of a
wrong plan to achieve an aim.
An adverse event is defined as an injury caused by medical management rather than by the
underlying disease or condition of the patient.
In an effort to thoroughly consider all of the relevant issues related to medical errors, the
Quality Interagency Coordination Task Force (QuIC) expanded of the IOM definition, as
follows (Quality Interagency Coordination Task Force, 2000):
An error is defined as the failure of a planned action to be completed as intended or the use of a
wrong plan to achieve an aim. Errors can include problems in practice, products, procedures, and
systems.
2.2 Classifications
Most people believe that medical errors usually involve drugs, such as a patient getting the
wrong prescription or dosage, or mishandled surgeries, such as amputation of the wrong
limb. However, there are many types of medical errors. The following seven categories in
Table 1 summarize types of medical errors that can occur (Lazarou et al., 1998) :
Medication Error Such as a patient receiving the wrong drug.
Surgical Error Such as amputating the wrong limb.
Diagnostic error Such as misdiagnosis leading to an incorrect choice of therapy,
failure to use an indicated diagnostic test, misinterpretation of
test results, and failure to act on abnormal results.
Equipment failure Such as defibrillators with dead batteries or intravenous
pumps whose valves are easily dislodged or bumped, causing
increased doses of medication over too short a period.
Infections Such as nosocomial and post-surgical wound infections.
Blood transfusion-
related injuries
Such as a patient receiving an incorrect blood type.
Misinterpretation of
other medical orders
Such as failing to give a patient a salt-free meal, as ordered by
a physician.
Table 1. Types of medical errors
Quality Assurance and Management
248
There are many possible ways to categorize medical errors, but no universally accepted
taxonomy. Classifications have included:
Type of health care service provided (e.g., classification of medication errors by the
National Coordinating Council for Medication Error Reporting and Prevention)
(NCCMERP, 1998).
Severity of the resulting injury (NQF, 2007) (e.g., sentinel events, defined as any
unexpected occurrence involving death or serious physical or psychological injury
by the Joint Commission on Accreditation of Healthcare Organizations (JCAHO,
2011)).
Legal definition (e.g., errors resulting from negligence (IOM, 1999)).
Type of setting (e.g., outpatient clinic, intensive care unit), and
Type of individual involved (e.g., physician, nurse, patient).
Also, Leap (1993) proposed a classification of medical errors types as presented in the
Table 2:
Diagnostic
Error or delay in diagnosis
Failure to employ indicated tests
Use of outmoded tests or therapy
Failure to act on results of monitoring or testing
Treatment
Error in the performance of an operation, procedure or
test
Error in the administering the treatment
Error in the dose or method of using a drug
Avoidable delay in treatment or in responding to a
abnormal test
Inappropriate (not indicated) care
Preventive
Failure to provide prophylactic treatment
Inadequate monitoring or follow-up of treatment
Other
Failure of communication
Equipment failure
Other system failure
Table 2. Types of medical errors
Finally, the National Coordinating Council for Medication Error Reporting and Prevention
(NCC MERP) Index for Categorizing Errors (National Coordinating Council for Medication
Error Reporting and Prevention (NCC MERP), 1998), proposes the following categories of
Adverse Events severity in the NCC MERP Index:
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
249
Category A Circumstances or events that have the capacity to
cause error
Category B An error that did not reach the patient
Category C An error that reached the patient but did not cause
harm
Category D An error that reached the patient and required
monitoring or intervention to confirm that it resulted
in no harm to the patient.
Category E Temporary harm to the patient and required
intervention
Category F Temporary harm to the patient and required initial or
prolonged hospitalization
Category G Permanent patient harm
Category H Intervention required to sustain life
Category I Patient death
Table 3. Index for categorizing adverse events severity
Categories A, B, C and D describe medication errors that do not cause harm, while
categories E, F, G, H, and I of the NCC MERP Index describe errors that do cause harm.
3. The epidemiology and the root causes of medical errors
3.1 The epidemiology of medical errors
It is clear that, although the United States provides some of the best health care in the world,
the numbers of errors in health care are at unacceptably high levels. The Institute of
Medicines report (IOM, 1999) estimates that more than half of the adverse medical events
occurring each year are due to preventable medical errors, causing the death of tens of
thousands. The consequences of medical mistakes are often more severe than the
consequences of mistakes in other industriesleading to death or disability rather than
inconvenience on the part of consumersunderscoring the need for aggressive action in this
area.
As shown in the following table 4, the estimated total number of iatrogenic deaths -that is,
deaths induced inadvertently by a physician or surgeon or by medical treatment or
diagnostic procedures- in the US annually is $783,936 (Barczak et al., 1997; Burger et al.,
2003; Healthcare Cost and Utilization Project [HCUPnet]; IOM, 1999; Lazarou et al., 1998;
Morbidity and Mortality Weekly Report [MMW], 2000; Null et al., 2007; Starfield, 2000a;
Tunis & Gelband, 1994; Weinstein, 1998; Xakellis et al., 1995). It is evident that the American
medical system is itself the leading cause of death and injury in the US (U.S. National Center
for Health Statistics [USNCHS], 2003). By comparison, approximately 699,697 Americans
died of heart in 2001, while 553,251 died of cancer.
Quality Assurance and Management
250
Condition Deaths Cost
Adverse Drug Reactions 106,000 $12 billion
Medical error 98,000 $2 billion
Bedsores 115,000 $55 billion
Infection 88,000 $5 billion
Malnutrition 108,800
Outpatients 199,000 $77 billion
Unnecessary Procedures 37,136 $122 billion
Surgery-Related 32,000 $9 billion
Total 783,936 $282 billion
Table 4. Estimated annual mortality and economic cost of medical intervention
European medical errors statistics are difficult to acquire. Unlike in the US, there is no official
authority collecting data relative to medical errors occurrences. Nevertheless, existing figures
indicate an increase in reported medical malpractice incidents in recent years.
A United Kingdom estimate of clinical risks by University College London
(GeneralCologneRe, 2002) suggests that nowadays 3 - 4% of patients in the developed world
are harmed during a hospital stay. For 70% of them the resulting adverse effect is short-
lived, 16% endure permanent disabilities, while 14% subsequently die. The Kellog
Foundation (National Coalition on Health Care and the Institute for Healthcare
Improvement, 2000) found that Britains medical malpractice death rate is comparable to
that of the United States. Medical error is the third most frequent cause of death in the
United Kingdom after cancer and heart disease, killing up to 40,000 people a year. The
number of medical errors deaths therefore is four times greater than the number of deaths
due to all other types of accidents. In Germany, 1999 estimates put the number of medical
errors incidents at 400,000 per year (GeneralCologneRe, 2002).
In Ireland, one in every 100 patients is estimated to experience some form of medical error
(GeneralCologneRe, 2002). In Greece, there are not any official medical errors statistics.
Nevertheless, calculations indicate that about 20 to 30 patients die every day and other 200
are harmed because of preventable medical errors (Vozikis, A. & Riga, M., 2008a).
Rates in the later adverse event studies from UK, Denmark and New Zealand are
remarkably similar, all being around 10%; US rates are much lower, with Australia
seemingly much higher. The lower rates in the US might reflect better quality care, but
could also reflect the narrower focus on negligent injury rather than the broader quality
improvement focus of most other studies (Thomas et al, 2000a).
Although differences in adverse event rates between countries attract a great deal of media
attention, much debate and occasional recrimination, the whole issue needs to be set in a
broader context. Other attempts to compare health systems have produced a completely
different picture.
3.2 The root causes of medical errors
According to a variety of sources, the root cause of medical errors is due to the complexity
of today healthcare systems. The IOM (1999) emphasized that most medical errors are
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
251
systems related and not attributable to individual negligence or misconduct. The key to
reducing medical errors is to focus on improving the systems of delivering care and not to
blame individuals. Health care professionals are simply human and, like everyone else, they
make mistakes. The FDA reports that many patient deaths and injuries are associated with
the use of FDA-regulated medical products within a complex and time-pressured health
care system. Reducing the incidence of medical errors can save thousands of lives and
billions of dollars. The Institute for Health Care Improvement has identified the leading
cause of medical mistakes as the increasing complexity of health care (Griffin & Resar, 2009).
His general recommendations were for more simplification and greater standardization,
such as the use of bar codes to ensure that the right patient receives the right dose of the
right medication.
Several issues have contributed the incidence of medical errors (Bates, 1998) including:
Complexity of the health care system
Reluctance of doctors to admit errors
Lack of leadership
Insurance reimbursement system that rewards errors since hospitals can still bill for
additional services when patients are injured but often will not pay for practices that
reduce those errors
This orientation of thought that systems, not individuals, produce errors has profound
implications for caregivers and reporters. Medical leaders believe that focusing on systems
is the best way to prevent errors. Assigning blame helps keep them hidden. A systems
approach emboldens the health care policy officers to come forward with information
needed to understand how mistakes occur.
Many doctors and nurses would like nothing better than for the media to stop skewering
them individually and report on errors in the safer, neutral language of system failures.
Indeed, if there is one overarching critique of quality stories from the medical profession, it
is that the reporters look for victims and villains and blame caregivers too much. For
journalists, however, reporting on system failures can be difficult; as such stories tend to be
dry and antiseptic. But some journalists say the medical professionals may have a point.
These reporters believe that the deepest stories include not only personal practices but also
some sense of how these errors result from system failure. Reporters cannot let individuals
off the hook, but the media should remember that no one acts alone. An error can usually be
traced back to the system that sustains and directs the "perpetrator."
4. Identifying and measuring medical errors and adverse events
4.1 Framework for identifying medical errors
The overall goal of improved safety in health care is to reduce patient injury or harm, which
underscores the importance of distinguishing between errors and harm. Although detection
and analysis of errors is important in understanding failure-prone aspects of health care
delivery systems and designing strategies to prevent and mitigate these failures, there is
special value in quantifying actual harm.
Quality Assurance and Management
252
Medical errors are failures in processes of care and, while they have the potential to be
harmful, numerous reports have shown they are often not linked to the injury of the patient.
Because events of harm are clear clinical outcomes, they are particularly likely to engage
both clinicians and administrators in a thorough review of the system factors that led to the
adverse event, with a clear focus on improving patient outcomes.
By concentrating on the events actually experienced by patients, a hospital can begin to
foster a culture of safety that shifts from individual blame for errors to comprehensive
system redesign that reduces patient suffering. To address the clear need to quantify
adverse patient outcome, this paper focuses on the identification of harm or injury to the
patient (Healthcare Cost and Utilization Project [HCUPnet], 2003-modified), as shown in
Figure 1:
Fig. 1. Framework for identifying medical errors
4.2 Methods for studying and measuring medical errors
There are a number of methods of studying errors and adverse events, each of which has
evolved over time and been adapted to different contexts. Each of the methods has
particular strengths and advantages, and also weaknesses and limitations.
Table 5 illustrates a general framework to help select error and adverse event measurement
methods (Thomas & Petersen, 2003) :
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
253
Study method Advantages Disadvantages
Morbidity and mortality
conferences
and autopsy
Can suggest contributory
factors
Familiar to healthcare
providers
Hindsight bias
Reporting bias
Focused on diagnostic
errors
Infrequently used
Case analysis/root
cause analysis
Can suggest contributory
Factors Structured
systems approach
Includes recent data from
interviews
Hindsight bias
Tends to focus on severe
events
Insufficiently standardized
in practice
Claims analysis Provides multiple
perspectives (patients,
providers, lawyers)
Hindsight bias
Reporting bias
Non-standardized source of
data
Error reporting systems Provide multiple
perspectives over time
Can be a part of routine
operations
Reporting bias
Hindsight bias
Administrative data
analysis
Uses readily available data
Inexpensive
Might rely on incomplete
and inaccurate data
The data are divorced from
clinical context
Record review/
chart review
Uses readily available data
Commonly used
Judgments about adverse
events not reliable
Medical records are
incomplete
Hindsight bias
Review of electronic
medical record
Inexpensive after initial
investment
Monitors in real time
Integrates multiple data
sources
Susceptible to
programming and/or data
entry errors
Expensive to implement
Observation of patient care Potentially accurate and
precise
Provides data otherwise
unavailable
Detects more active errors
than other methods
Time consuming and
expensive
Difficult to train reliable
observers
Potential concerns about
confidentiality
Possible to be overwhelmed
with information
Active clinical surveillance Potentially accurate and
precise for adverse events
Time consuming and
expensive
Table 5. Advantages and disadvantages of methods used to study adverse events and
medical errors
Quality Assurance and Management
254
Although these methods can provide important and actionable information about systems,
they also have weaknesses. They are incapable of providing error or adverse event rates
because they are imprecise, primarily because of the various factors that influence whether
an error or adverse event leads to a claim, incident report, or autopsy.
In the error reporting systems method, errors witnessed or committed by health care
providers may be reported via structured data collection systems. Analysis of error reports
may provide rich details about latent errors that lead to active errors and adverse events.
But error reporting systems alone cannot reliably measure incidence and prevalence rates of
errors and adverse events because numerous factors may affect whether errors and adverse
events are reported. Providers may not report errors because they are too busy, afraid of
lawsuits, or worried about their reputation. High reporting rates may indicate an
organizational culture committed to identifying and reducing errors and adverse events
rather than a truly high rate. Despite these limitations, error reporting systems can identify
errors and adverse events not found by other means, such as chart reviews, and can thereby
be used in efforts to improve patient safety.
5. Underreporting of iatrogenic events
As few as 5% and no more than 20% of iatrogenic acts are ever reported (Barczak et al., 1997;
Bates et al., 1995; Leape, 1994; Starfield, 2000a; Starfield, 2000b; Thomas et al., 2000b). A
study conducted in two obstetrical units in the UK found that only about one-quarter of
adverse incidents were ever reported, to protect staff, preserve reputations, or for fear of
reprisals, including lawsuits (Bates et al., 1995).
An analysis by Wald and Shojania (2001) found that only 1.5% of all adverse events result in
an incident report, and only 6% of adverse drug events are identified properly. The authors
learned that the American College of Surgeons estimates that surgical incident reports
routinely capture only 5-30% of adverse events. In one study, only 20% of surgical
complications resulted in discussion at morbidity and mortality rounds (Vincent et al.,
1999). From these studies, it appears that all the statistics gathered on medical errors may
substantially underestimate the number of adverse drug and medical therapy incidents.
They also suggest that our statistics concerning mortality resulting from medical errors may
be in fact be conservative figures.
Standard medical pharmacology texts admit that relatively few doctors ever report adverse
drug reactions to the FDA. The reasons range from not knowing such a reporting system
exists to fear of being sued. Yet the public depends on this tremendously flawed system of
voluntary reporting by doctors to know whether a drug or a medical intervention is
harmful.
If hospitals admitted to the actual number of errors for which they are responsible, which is
about 20 times what is reported, they would come under intense scrutiny (Vincent et al.,
1999). Jerry Phillips, associate director of the FDA's Office of Post Marketing Drug Risk
Assessment, confirms this number. In the broader area of adverse drug reaction data, the
250,000 reports received annually probably represent only 5% of the actual reactions that
occur.(Bates, 1998)
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
255
Dr. Jay Cohen, who has extensively researched adverse drug reactions, notes that because
only 5% of adverse drug reactions are reported, there are in fact 5 million medication
reactions each year ( Dickinson, 2000).
6. Research findings
The aim of the present study is to present various patterns of medical errors in Greece. For
the present research, an extensive search was carried out to find the relevant authorities and
the organisations where the various stakeholders affected by the medical errors turn to. The
material of our analysis consists from 141 cases coming from the administrative courts
awards and Greek Obudsmans reports for the years 2000 to 2007.
For every case, we record the year of the recourse or the award publication, the legal status
of the health care organization, the doctors specialty, the type of medical error, the severity
of the adverse event and the amount which the Administrative Court of First Instance
imputed. The estimation of the financial cost is based on 31 lawsuits for which the
Administrative Court of First Instance published awards during the period 2003-2007.
All the cases refer to Public or Not-for-Profit Health Care Organizations, because the
administrative courts and the Greek Ombudsman have the authority to inquire cases only
concerning Public and Not-for-Profit Organizations.
The assessment of patient safety should be carried out through both qualitative and
quantitative methods. The qualitative methods (Institutionalization of Quality Assurance
Project Report [QAP], 2001) map the various activities that exist in the routine delivery of
services, for example using methods used in pathways analysis without, however,
recommending one pathway as more appropriate than another. The purpose of the
descriptive phase is to map the genome of safety in the delivery of care and services. The
quantitative approach (C.E., 2006) uses indicators and epidemiological methods of analysis
to systematically quantify distinct aspects of processes and their immediate outputs in
relation to:
- adverse events;
- adverse events causing harm to patients;
- adverse events causing harm to providers; and
- for the risk of adverse events.
Surgeons and Obstetricians are the specialties most involved in medical errors as presented
in the Table 6:
Specialty Cases
General Surgeon 29
Obstetricians / Gynecologists 14
Orthopedic Surgeons 13
Ophthalmology Surgeon 11
Pathologists 10
Cardiac Surgeon 9
Quality Assurance and Management
256
Clinical Microbiologist 8
Anaesthesiologist 7
Urologists 5
Gastroenterologist 3
Plastic Surgeon 3
Otolaryngologists (ENT surgeons) 2
All Other 18
n/a 9
Total 141
Table 6. Doctors specialty
The most common medical errors are those referred to the category Error in performance of
an operation, procedure or test, following with the Error or delay in diagnosis. The allocation
of medical errors by error type (as defined in Table 2) is presented in the Figure 2:
42%
28%
18%
12% Error in performance of an
operation, procedure or test
Error or delay in diagnosis
Error in administering the
treatment
Inadequate monitor or follow-up
of teatment
Fig. 2. Type of Medical error
The recorded medical errors caused various adverse events, with the most common the
Category E: Temporary harm to the patient and required intervention & Category F: Temporary
harm to the patient and required initial or prolonged hospitalization closely followed by the
Category I: Patient death.
Below, in the Figure 3, we present the allocation of medical errors by severity category,
according to the National Coordinating Council for Medication Error Reporting and
Prevention (NCC MERP) Index for Categorizing Errors (as defined in Table 3):
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
257
38%
35%
19%
8%
Category E & Category F
Category I
Category G
Category H
Fig. 3. Severity of medical error's adverse event
In Greece, contrary to other countries, the estimation of the total financial burden due to
medical errors is very difficult due to the absence of an organized information system. Thus,
the implementation of a system in order to identify, report and analyze medical errors and
patients adverse events following the international standards is crucial.
The estimation of the financial cost was based on 31 lawsuits for which the Administrative
Court of First Instance published awards during the period 2003-2007. Our research pointed
out that in Greece, the economic cost due to medical errors is worryingly high. In addition,
the amount of mean and final compensation has been dramatically increased during the
period 2003-2007 (Table 7 and Figure 4):
Year Cases Mean compensation Total compensation
2003
3 136.972 410.916
2004
3 194.676 584.029
2005
5 50.972 254.860
2006
6 285.453 1.712.720
2007
2 375.000 750.000
Table 7. Mean and total compensation for years 2003-2007
The most injurious specialties are General Surgeons and Anaesthesiologists, while
Anaesthesiologists have the higher mean compensation (Table 8 and Figures 5, 6 & 7):
Quality Assurance and Management
258
Mean compensation
0
50.000
100.000
150.000
200.000
250.000
300.000
350.000
400.000
2003 2004 2005 2006 2007
Fig. 4. Mean compensation for years 2003-2007
Mean Compensation
0
200.000
400.000
600.000
800.000
1.000.000
1.200.000
G
e
n
e
r
a
l
S
u
r
g
e
o
n
A
n
a
e
s
t
h
e
s
i
o
l
o
g
i
s
t
G
a
s
t
r
o
e
n
t
e
r
o
l
o
g
i
s
t
O
p
h
t
h
a
l
m
o
l
o
g
y
S
u
r
g
e
o
n
C
a
r
d
i
a
c
S
u
r
g
e
o
n
O
r
t
h
o
p
e
d
i
c
S
u
r
g
e
o
n
s
A
l
l
O
t
h
e
r
s
Fig. 5. Mean compensation for various specialties
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
259
Specialty Cases
Mean
compensation
Total
compensation
General Surgeon 10 457.428 4.574.283
Anaesthesiologist 4 1.012.570 4.050.279
Gastroenterologist 2 17.500 35.000
Ophthalmology Surgeon 1 586.940 586.940
Cardiac Surgeon 2 426.838 853.675
Orthopedic Surgeons 3 196.950 590.850
All Others 9 407.333 3.665.995
Total 31 463.130 14.357.022
Table 8. Mean and total compensation for various specialties
Total Compensation
0
500.000
1.000.000
1.500.000
2.000.000
2.500.000
3.000.000
3.500.000
4.000.000
4.500.000
5.000.000
G
e
n
e
r
a
l
S
u
r
g
e
o
n
A
n
a
e
s
t
h
e
s
i
o
l
o
g
i
s
t
G
a
s
t
r
o
e
n
t
e
r
o
l
o
g
i
s
t
O
p
h
t
h
a
l
m
o
l
o
g
y
S
u
r
g
e
o
n
C
a
r
d
i
a
c
S
u
r
g
e
o
n
O
r
t
h
o
p
e
d
i
c
S
u
r
g
e
o
n
s
A
l
l
O
t
h
e
r
s
Fig. 6. Total compensation for various specialties
Quality Assurance and Management
260
Total Compensation Allocation to Specialties
33%
13%
6%
3%
6%
10%
29% General Surgeon
Anaesthesiologist
Gastroenterologist
Ophthalmology Surgeon
Cardiac Surgeon
Orthopedic Surgeons
All Others
Fig. 7. Total compensation allocation to specialties
The highest mean compensation awarded to unknown severity adverse events and to the
Category H: Intervention required to sustain life. It is remarkable that the awarded mean
compensations for the Category I: Patient death is lower than those to adverse events
categories with minor severity (Table 9 and Figure 8):
Severity Cases
Mean
Compensation
Total
Compensation
Unknown
1 1.267.790 1.267.790
E
9 31.024 279.212
F
1 733.675 733.675
G
7 755.786 5.290.501
H
2 1.154.135 2.308.269
I
11 407.052 4.477.575
Total
31 463.130 14.357.022
Table 9. Mean and total compensation for adverse events severity categories.
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
261
Mean Compensation
0
200.000
400.000
600.000
800.000
1.000.000
1.200.000
1.400.000
Unknown E F G H I
Fig. 8. Mean compensation for adverse events severity categories
7. Conclusions
Patient safety is extraordinarily important to the public, but the policy issues around
adverse event detection and medical errors are questionable in practice. Within the Greek
Health Care System today, most adverse events are being detected using spontaneous
reporting, which identifies only a small number of adverse events. This is probably the
major reason that problems with patient safety have been overlooked until recently.
Unfortunately, given the current structure of Greek Health Care System, there are strong
incentives for Healthcare Organizations to turn a blind eye to medical errors and adverse
events. In particular, serious, preventable adverse events typically should be reported to the
Hospital Board and the Ministry of Health.
Unfortunately such events often lead to long lasting internal investigations from the
hospitals management or end up in the press or in the courts, with adverse consequences
for the doctor involved, the hospital or for the Health Care System as a whole.
Our research points out, that medical errors are a common phenomenon in Greek Health
Care System (as in every Health Care System worldwide). Furthermore, they cause severe
harm and substantial economic and psychological burden to the patients and to their
relatives, professional medical liability to the doctors involved and a high economic burden
to the Greek Health System and to the Greek Insurance Industry.
Though adverse events have negative connotations to many, our current system offers few
incentives to healthcare organizations to look for them and possibly correct them
aggressively.
Quality Assurance and Management
262
It is clear that a systematic effort to understand and reduce medical errors will be the
cornerstone of health care providers professional responsibility in coming years, primarily
due to the high costs associated with them.
Below, we present some of the current activities, as well as recommendations for additional
activities and policy proposals to reduce medical errors:
Building Public Awareness of Medical Errors
Building Purchasers Awareness of the Problem
Working With Providers to Improve Patient Safety
Using Decision-Support Systems and Information Technologies
Using Standardized Procedures, Data Integration
Checklists, and the Results of Human Factors Research
Specifically, Greek government should ensure that patient safety is the cornerstone of all
relevant health policies, in particular policies to improve quality. For this reason, they due to
develop a coherent and comprehensive patient-safety policy framework by promoting the
development of a reporting system for patient-safety incidents in order to enhance patient
safety, by reviewing the role of other existing data sources, such as patient complaints and
compensation systems, clinical databases and monitoring systems as a complementary
source of information on patient safety and also by producing regular reports on actions
taken nationally to improve patient safety (C.E., 2006).
In developing patient-safety strategies, government should take a proactive, preventive and
systematic attitude: to admit that errors happen, to identify and manage risk points in
processes, to learn from errors and minimise their effects, to prevent further occurrences of
patient-safety incidents and to encourage both patients and health-care personnel to report
those patient-safety incidents they are confronted with. This could be achieved by proactive
management and systematic design of safe structures and processes.
Patient safety should be recognised as the necessary foundation of quality health care, and
should be based on a preventive attitude and systematic analysis and feedback from
different reporting systems: patients reports, complaints and claims as well as systematic
reporting of incidents, including complications, by health-care personnel. The patient-safety
strategy should become an integral component of the overall continuing quality-
improvement programme. Investment in patient safety, as in quality improvement, should
be considered as economically sound and good value for money (Institutionalization of
Quality Assurance Project Report [QAP], 2001).
Support from the government to health professionals is crucial to make disclosure of the
incident possible and to enable continuation of work in health care, where risks will always
exist and adverse events happen (C.E., 2006).
Reducing the risk of error in health care will require a substantial and sustained effort at all
levels of the health care system. It must become a priority goal wherever care is giventhe
doctors office, the hospital, and the nursing home. That goal must be supported by the
commitment of both human and financial resources. The Ministry of Health -and other
regulators and accrediting bodies- must articulate the vision of safe care that they call upon
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
263
others to work toward (National Coalition on Health Care and the Institute for Healthcare
Improvement, 2000).
Of course, the key task for the future effectiveness of any medical errors reduction strategy
and policy will be to identify quality assurance practices that could respond effectively to
system data. We must not forget, that even countries with a long history of error reporting,
have not yet implemented comprehensive programs to correct problems once they are
identified.
The primary objective of an incident reporting system (Vozikis & Riga, 2008b; Vozikis, 2009)
is the enhancement of patient safety, by learning from adverse events and mistakes made.
Reporting and collection of incident data is meaningful only if the data is analysed and
evaluated and if feedback is given to the professionals involved in the incident, and to all
others who could learn from the incident. Although the medical literature has focused
primarily on medication- and procedure-related errors, there is little information on the
potential benefits and hazards associated with the use of new medical technologies.
To sum up, patient safety deals with safe practices in a safe health care system where the
health providers analyze the quality and safety indicators to prevent future adverse events.
8. Acknowledgement
This research has been co-financed by the European Union (European Social Fund ESF)
and Greek national funds through the Operational Program "Education and Lifelong
Learning" of the National Strategic Reference Framework (NSRF) - Research Funding
Program: Heracleitus II. Investing in knowledge society through the European Social
Fund.
9. References
Barczak, C.A., Barnett, R.I., Childs, E.J., & Bosley, L.M. (1997). Fourth national pressure ulcer
prevalence survey. Advances in Wound Care. Jul-Aug;10(4), pp. 18-26
Bates, D.W. (1998). Drugs and adverse drug reactions: how worried should we be? JAMA,
Apr 15;279(15), pp. 1216-7
Bates, D.W., Cullen, D.J., Laird N. et al. (1995). Incidence of adverse drug events and
potential adverse drug events. Implications for prevention. ADE Prevention Study
Group. JAMA . Jul 5;274(1), pp. 29-34
Burger, S.G., Kayser-Jones, J., & Bell, J.P. (2000). Malnutrition and dehydration in nursing
homes: key issues in prevention and treatment. National Citizens' Coalition for
Nursing Home Reform
Quality Assurance and Management
264
Council of Europe, Committee of Ministers. (2006). Recommendation Rec7 of the Committee of
Ministers to member states on management of patient safety and prevention of adverse
events in health care, 965th meeting of the Ministers Deputies, Committee of
Ministers on 24 May 2006
Dalrymple, J., & Drew, E. (2000). Quality: On the Threshold or the Brink? Total Quality
Management, 11 (4-6), pp. 697-703
Dickinson, J.G. (2000). FDA seeks to double effort on confusing drug names. Dickinson's
FDA Review, Mar;7(3), pp. 13-4
European Commission (2005). Special Eurobarometer
GeneralCologneRe (2002). Insurance Issues in Europe: Impending Changes in the European
Health Care Sector and the Effect on Risk Management and Malpractice Insurance,
December 2002
Griffin, F.A. & Resar, R.K. (2009). IHI Global Trigger Tool for Measuring Adverse Events (Second
Edition). IHI Innovation Series white paper. Cambridge, MA:Institute for
Healthcare Improvement
Healthcare Cost and Utilization Project. (2003). In: Agency for Healthcare Research and Quality
Rockville, MD, Available from: http://www.ahrq.gov/data/hcup/hcupnet.htm
Institute of Medicine. (1999). To Err is Human: Building a Safer Health System. Washington,
DC: National Academy Press
Institute of Medicine. (2001). Crossing the Quality Chasm: A New Health System for the 21st
Century. Washington, DC: National Academy Press
Institutionalization of Quality Assurance Project Report. (2001). Published for the U.S.
Agency for International Development (USAID) by QAP, Bethesda, Maryland,
U.S.A.
Joint Commission on Accreditation of Healthcare Organizations (JCAHO). (2011) Sentinel
Event Policy and Procedures, Available from
http://www.jointcommission.org/Sentinel_Event_Policy_and_Procedures/
Kelly, D. (Ed.). (2006). Applying quality management in healthcare: a systems approach, Health
Administration Press, AUPHA Press, 2
nd
ed., ISBN-13 978-1-56793-260-7,
Washington, DC
Lazarou, J., Pomeranz, BH., & Corey, PN. (1998). Incidence of adverse drug reactions in
hospitalized patients: a meta-analysis of prospective studies. JAMA, Apr 15;279(15),
pp. (1200-5)
Leape, L.L. (1993). Preventing Medical Injury. QRB Quality. Review Bulletin., 19 5, pp. 144-
149
Leape, L.L. (1994). Error in Medicine. JAMA, 21;272, pp. 1851-1857
Lohr, K. N. (Ed.). (1990). Medicare: A Strategy for Quality Assurance. Washington, DC:
National Academies Press
Morbidity and Mortality Weekly Report. (2000). Fourth Decennial International Conference on
Nosocomial and Healthcare-Associated Infections, Vol. 49, No. 7, p.138
National Coalition on Health Care and the Institute for Healthcare Improvement (2000).
Reducing Medical Errors and Improving Patient Safety Success Stories From the
Front Lines of Medicine, Monograph, in Accelerating Change Today (A.C.T.) foe
Americas Health
Patterns of Medical Errors:
A Challenge for Quality Assurance in the Greek Health System
265
National Coordinating Council on Medication Error Reporting and Prevention. (1998).
Taxonomy of Medication Errors
NQF. (2007). Serious Reportable Events in Healthcare2006, ISBN 1-933875-08-9, Washington
D.C.
Null, G., Dean, C., Feldman, M., Rasio, D., & Smith, D. (2007). Death by Medicine, Life
Extension Foundation
Quality Interagency Coordination Task Force. (2000). Report to the President, February,
Doing What Counts for Patient Safety: Federal Actions to Reduce Medical Errors
and Their Impact, Accessed September 7, 2003, Available from:
http://www.quic.gov/report/mederr4.htm#evidence
Starfield, B. (2000a). Is US health really the best in the world? JAMA , Jul 26;284(4), pp.
483-5
Starfield, B. (2000b). Deficiencies in US medical care. JAMA, Nov 1;284(17), pp. 2184-5
Thomas , EJ & Petersen LA. (2003). Measuring Errors and Adverse Events in Health Care,
Journal of General Internal Medicine 18 (1), pp.6167.
Thomas, E.J., Studdert, D.M., Burstin, H.R., Orav, E.J., Zeena, T., Williams, E.J., et al. (2000b).
Incidence and types of adverse events and negligent care in Utah and Colorado.
Medical Care, 38(3), pp. 261271
Thomas, E.J., Studdert, D.M., Runciman, W.B., Webb, R.K., Sexton, E.J., Wilson, R.M., et al.
(2000a). A comparison of iatrogenic injury studies in Australia and the USA. I:
Context, methods, casemix, population, patient and hospital characteristics.
International Journal for Quality in Health Care, 12, pp. 371-8
Tunis, S.R. & Gelband, H. (1994). Health care technology in the United States. Health Policy,
Oct-Dec;30(1-3), pp. 335-96
U.S. National Center for Health Statistics. (2003). National Vital Statistics Report, vol. 51, no.
5, March 14
Vincent, C., Stanhope, N. & Crowley-Murphy, M. (1999). Reasons for not reporting adverse
incidents: an empirical study. Journal of Evaluation in Clinical Practice. Feb;5(1), pp.
13-21
Vozikis, A. & Riga, M. (2008a). Medical Errors in Greece: The Economic Perspective through
the Awards of Administrative Courts, Journal of Society, Economy and Health Vol. ,2,
pp. 423-437
Vozikis, A. & Riga, M. (2008b). M.E.R.I.S: Information System for the identification,
collection, analysis and reporting of Medical Errors, Proceedings of 2nd International
Scientific Conference eRA-2, Greece-Athens, September 2007, pp. 423-437
Vozikis, A. (2009). Information management of medical errors in Greece: The MERIS
proposal. International Journal of Information Management, 29, pp. 1526
Wald, H. & Shojania, K.G. (2001). Incident reporting. chap 4. Evidence
Report/Technology Assessment, In: Making Health Care Safer: A Critical Analysis
of Patient Safety Practices. Rockville, MD: Agency for Healthcare Research and Quality,
Shojania, K.G., Duncan, B.W., McDonald, K.M., et al, eds., No. 43. AHRQ
publication 01-E058
Weinstein, R.A. (1998). Nosocomial Infection Update. Emerg Infect Dis, 4(3), pp. 416-20
World Health Organization. (1984). Publication DEM/NC/84.153(E)
Quality Assurance and Management
266
World Health Organization. (2006). Quality of care. A process for making strategic choices in
health systems. WHO Library Cataloguing-in-Publication Data, ISBN 92 4 156324 9,
978 92 4 156324 6, WHO Press, Switzerland
Xakellis, G.C., Frantz, R., & Lewis, A. (1995). Cost of pressure ulcer prevention in long-term
care. Am Geriatr Soc, 43(5) pp. 496-501
15
Critical Success Factors for Quality
Assurance in Healthcare Organizations
Vctor Reyes-Alczar, Antonio Torres-Olivera,
Diego Nez-Garca and Antonio Almuedo-Paz
Andalusian Agency for Health Care Quality
Spain
1. Introduction
In recent years in the health services the need has been stressed to use management tools
which highlight the central role of professionals and which support the implementation of a
clinical leadership based on greater autonomy and decision-making in management. The
purpose is to allow alignment with the ultimate goals of health systems, which are to strive
for a service with a high degree of effectiveness, to respond to the needs and expectations of
citizens, and to have medium and long term sustainability.
There are many conceptual approaches in the field of clinical management: its realization in
defined organizational spaces (Clinical Units); synergy with other management tools such as
the process or clinical pathway approach and the definition of competences; the use of
clinical guidelines or the use of scientific evidence as guarantees of clinical effectiveness; the
new relationship between professionals and patients where more proactive models promote
the use of patient decision aids that encourage participation in shared decision-making,
where core dimensions of healthcare quality such as continuity and safety are reasonably
assured.
Clinical management could be defined as the ability of health professionals to manage the
resources they use in their clinical practice efficiently and effectively (Torres-Olivera &
Reyes-Alczar, 2011). It establishes the effective involvement of professionals in achieving
the objectives of the healthcare organization and is associated with greater decision-making
capacity and autonomy. It also establishes greater commitment to the citizen (taking into
account their needs and expectations) and to the healthcare organization by promoting
sustainability in the short, medium and long term. There are many initiatives aimed at
boosting clinical management in the public health sector as a strategy to ensure greater
effectiveness and sustainability of the health services. This chapter seeks to analyze possible
critical success factors to be considered when starting this type of project.
2. Critical Success Factors
A Critical Success Factor (CSF) is a particular feature of the organizations internal or
external environment that is important for it to achieve its objective. A factor is critical if its
Quality Assurance and Management
268
fulfilment is absolutely necessary to achieve these objectives, thus requiring action from the
sectors involved. Critical success factors that can determine the proper development of
clinical management can be summarized as follows:
2.1 Patient-centred care
From a public service perspective, the focus of healthcare is the citizen, so any approach to
intervention should be based on their needs and expectations. To achieve this, these needs
and expectations must be explored and understood. Their fulfilment must be seen as a
fundamental dimension in the quality of service provided. In the last 40 years a large body
of literature "has been advocating a patient-centred approach in healthcare" (Mead and Bower,
2000, 1087). Since then, different definitions of the concept have emerged. Byrne and Long
(1976) proposed a definition that emphasized a style of medical consultation that uses the
patient's knowledge and experience to guide the interaction between themselves and the
healthcare professional. From a clinical management point of view rather than healthcare,
Laine and Davidoff (1996) understood patient-centred care as more "congruent with, and
responsive to patients' wants, needs and preferences." This entails: the inclusion of a
biopsychosocial perspective in the treatment of disease; the patient being conceived as "a
personal experience rather than an object" suffering from an illness (Mead & Bower, 2000: 1089);
sharing decisions and responsibilities in a more cooperative manner; assuming an inter-
subjective character in the doctor-patient relationship, strengthening its human dimension.
This way of approaching healthcare attempted to oppose the conventional "biomedical model"
(Friedson, 1970) of doctor-patient relationship. In that conventional model the relationship is
reduced to identifying the clinical signs and symptoms of a disease and the subsequent
prescription of a standardized treatment.
At present the clinical setting is much more open. The traditional reliance of service
organizations on changes in their environment was not applicable to health services imbued
with technical self-importance, the guarding of information and one-sided communication
processes with patients. The paradigm shift aimed at making the citizen the real objective of
clinical practice, has opened a new scenario in which the units must build a new
relationship with the patient in which new skills and abilities should form part of the action
plans of professional teams.
From the clinical management standpoint, the model of patient-centred care carries certain
elements of responsibility for the patient. In this sense, it is assumed that the information
must be accurate and shared, rights respected and participation guaranteed. These elements
define perfectly the changes of direction that a clinical unit or department must take in order
to develop a clinical management plan, and which basically involve:
Knowing the users and potential users of the health services. Knowing who they are
and how many they may be, but above all, knowing their needs and expectations. A
clinical unit or department must build its services on that foundation.
Knowing the level of satisfaction among patients who have used a clinical unit or
department and using this information to detect new areas for improvement and
development.
Providing adequate and accurate information, promoting opportunities for
participation and shared decision-making, properly handling procedures for informed
Critical Success Factors for Quality Assurance in Healthcare Organizations
269
consent and patient decision aids. To achieve this goal it is essential to improve the
communication skills of the professionals in the clinical unit.
Transparency, to bring the results of the clinical unit or department to the attention of
society, opening channels of communication that support the transmission of
information and knowledge, and encouraging participation through social networks,
patient forums, etc.
Fig. 1. Patient-centered care
2.2 Leadership
Clinical leadership is central to the strategy of clinical management. Studies, such as those of
Cunningham and Kitson (2000) and West et al. (2004), have demonstrated the importance of
clinical leadership in improving the quality of care and how the use of evidence-based
medicine has resulted in a more patient-centred practice. The importance of the role played
by the clinical leadership is acknowledged by the government agencies responsible for
ensuring the quality of care, such as the National Health Service of Scotland being given
responsibility for "driving service improvement and the effective management of teams to provide
excellence in patient/client care (NHS Scotland 2004: 4). Also, other organizations such as the
Quality Assurance and Management
270
Joint Commission speak of "effective leadership" that determines the strength and consistency
of performance in areas such as planning, management, coordination, provision and
improvement of health services (Joint Commission Resources, 2009).
However, this leadership is not an isolated factor and requires other support. As stated by
West et al. (2004), other support mechanisms and staff must be deployed and promoted for
clinical leadership to be successful in achieving greater quality of care. Among these
mechanisms, those associated with the empowerment paradigm (Abdelrazek et al., 2010) are
highlighted. There is broad academic consensus on the importance of empowerment in
work environments. On the one hand, there is a macro perspective on the contextual agents
and socio-structural conditions that facilitate empowerment. On the other, the micro
perspective focuses on the feelings of employees about their role within the organization,
and has been called "psychological empowerment" (Knol & van Linge 2009). Both aspects of
empowerment, structural and psychological, provide clinical leadership with performance
tools that improve both individual work and the work context in which they are located.
Therefore, professional leadership must be encouraged in all its aspects, making the
stakeholders of the clinicians the objectives of the organization, striving for commitment to
them and providing effective leadership tools from the management structures.
This process necessarily involves the need to define the map of the competencies, attitudinal
and/or knowledge and abilities, that healthcare professionals have to incorporate. In other
words, it is a matter of cataloguing best practices to guide professionals to achieve their own
development goals. It establishes a set of competencies that helps determine the gap
between the actual competencies that a particular professional may have and those required
by their competencies map. An appropriate training programmes can then be established to
reduce any gap. Different international organizations, such as the International Union for
Health Promotion and Education (IUHPE), have encouraged and agreed standards for
career development within the healthcare sphere, helping to establish a common
international professional development framework (Shilton, 2009).
In this regard, the launch of an ambitious professional development project by the
Andalusian Agency for Healthcare Quality (Spain) is highlighted. A tool for the
Management of Individual Development Plans has been designed and implemented which
allows the competence gaps to be identified among the professionals of the clinical units.
This is achieved through a process of self-assessment based on identifying levels of
achievement in relation to a catalogue of best practices for the job. Training or professional
development programmes are established according to the identified gap.
(http://www.juntadeandalucia.es/agenciadecalidadsanitaria/formacionsalud/)
It is also important to clearly define the figure of the manager or director of the clinical unit,
establishing their competency map and their assigned functions. Interaction with the
managers of other healthcare centres and political structures of the healthcare system is
stressed as one of the core attributes that define clinical leadership, according to Christian
and Norman (1998). They also play the role of manager of all the resources (human,
financial, equipment and materials) that make up the Clinical Unit.
On this topic, it should be noted that the Observatory for Quality of Health Training-Spain,
using the tool for the Management of Individual Development Plans, has defined the
competency map of the managers or directors of the Clinical Units of the Andalusian Public
Critical Success Factors for Quality Assurance in Healthcare Organizations
271
Health System. This map consists of 26 specific practices and 106 requirements with
different levels of achievement (from the essential to the strategic) in 12 key competencies:
[1] Attitude of continuous learning and improvement [2], Scientific and technical capacity,
[3] Capacity for decision-making, [4] Communication [5] Management and Planning, [6]
Promotion of professional development, [7] Management of the quality of clinical safety, [8]
Efficient management of resources, [9] Innovation and Leadership, [10] Promotion of
research and teaching, [11] Guidance to citizens [12] Results-orientation.
(http://www.juntadeandalucia.es/agenciadecalidadsanitaria/)
Fig. 2. Leadership
2.3 Teamwork
A patient-centred approach to healthcare involves a multidisciplinary care process built
around a team with common goals and developed in an integrated organizational model.
The importance and effectiveness of teamwork in healthcare processes have been widely
studied in recent decades. In fact, some studies have empirically validated their
effectiveness through the study of their structures and dynamics (Mickan, 2005). Mickan
(2005) indicates two large blocks of benefits of effective teamwork: collective and individual
benefits. Among the collective benefits may be found those affecting the organization, such
as reducing the time and costs of hospitalization and greater accessibility for patients, and
those affecting the team such as a more efficient use of healthcare services or improved
communications. The individual benefits affect the patients by improving satisfaction,
greater acceptance of treatment and improved health outcomes, and the professionals, who
experience improved satisfaction and well-being at work.
Quality Assurance and Management
272
In the view of this chapters authors, teamwork will play an important role in the
effectiveness of the results obtained in clinical practice. In other words, the capacity of
health professionals in a particular clinical unit to integrate will be directly related to their
clinical effectiveness and their decision-making ability. This will therefore determine the
final results of the unit. For example, the Strategic Plan 2010-2013 of the Hospital Clinic of
Barcelona is based on teamwork as an essential element in the organization of healthcare
units (Castells, 2011).
Fig. 3. Teamwork
Teamwork encourages a sense of belonging and differentiation as a motivating element. The
team must know what the objectives of the unit are, and what their individual contribution
to them is, regardless of the professional group and level to which they belong. Similarly,
they should know what their results are, both individually and collectively, and actively
participate in the improvement processes that are instigated. The working model must
transcend the limits of the clinical unit, with continuity of care being a dimension that the
healthcare unit must take into account in order to improve clinical outcomes through
consensus building between different levels of professionals involved in patient care.
Critical Success Factors for Quality Assurance in Healthcare Organizations
273
2.4 Autonomy and responsibility
The ability to make decisions on resources in clinical practice is the core concept of clinical
management. That capacity has to be based on the commitments established with the
organization through procedural agreements that define the playing field between
healthcare units (departments) and Corporate Management. This is probably one of the
most difficult success factors to develop in practice because it incorporates a different
culture, which clashes with the values, or rather with the roles traditionally assigned to
the different actors in the system. There is widespread academic agreement on the need to
maintain a certain degree of autonomy for healthcare professionals in order to improve
not only their ability to cope with everyday challenges, but also as a fundamental aspect
of their personal performance and motivation (Harrison and Dowswell, 2002). The
demands of autonomy and responsibility for the clinical units stem from those benefits
that have been empirically demonstrated in the professional field (Schulz et al. 1991, Akre
et al. 1997, Kapur et al. 1999). The main focus of these analyses has been on the ability of
professionals and clinical units to determine or establish their own clinical strategies and
the assessment of their own performance. However, demands for autonomy and
"decentralization" of decision-making in clinical practice have not been without
developmental difficulties. As in any other field of work, autonomy in clinical practice has
faced problems that derive from the ongoing "bureaucratization" of the processes and
"mechanization" of the tasks of professionals, with their decisions subject to ever increasing
controls. (McKinlay & Arches, 1985).
There is little tradition of managers delegating tasks and responsibilities to healthcare
professionals, even though it is the clinical decisions that have a more direct impact on
resource consumption. Furthermore, healthcare professionals are not inclined to take
responsibilities which they believe are outside their healthcare role. To this can be added a
traditional distrust between the two camps. The nature of this distrust is rooted in the
culture clash between the medical corpus and those that Alford (1975) termed "corporate
rationalists", these are managers and healthcare policy-makers that need not be medically
qualified (Camprub, 2011). For Alford, the corporate rationalists are confronted by
structures that represent the interests of the "professional monopolists", i.e., the healthcare
professionals, and they stress rational planning and efficiency over the decisions of
healthcare experts (Alford, 1975, Lewis, 2006). Along the same line, Lewis states "the power
of the medical profession in the health policy arena, by analysing which actors are perceived as
influential, and how influence is structured in health policy" (Lewis (2006). Despite the claims of
other studies, Lewis empirically demonstrates the increasing capacity of healthcare
professionals to influence health policy, and therefore they have greater responsibility in
decision-making.
It is therefore essential to incorporate new management styles where the prime role of
managers is to facilitate healthcare processes and to support the operation of clinical units.
On the other hand, professionals must be introduced to, and trained in, the various
competencies that encourage their participation and involvement in decision-making on the
use of resources. Finally, all this must be articulated through management or grant
agreements that clearly establish the commitments made by both sides, linking the
achievement of individual objectives, and those of the clinical unit, to an incentives model.
Although there is broad consensus on this, when it comes to it being put into practice,
Quality Assurance and Management
274
healthcare organizations face difficulties caused largely by the, not always peaceful,
coexistence of strong, pre-existing corporate interests or divisional structures that detract
from the patient-centred vision and which make decision-making difficult at the clinical unit
level. At other times, it is the managers of the healthcare organizations themselves who are
reluctant to redirect their own role to allow real decentralization of management processes,
incorporating and engaging clinical decision makers. It is probably necessary to introduce
different rules which enable some professional and management roles to be redefined, or to
create less hierarchical structures that more obey effectiveness and efficiency criteria, that
allow effective integration of resources to give a more cohesive response to the needs and
expectations of the citizens.
Fig. 4. Autonomy and responsibility
Critical Success Factors for Quality Assurance in Healthcare Organizations
275
2.5 Care organized from an integrated view of processes
In today's information society the citizen plays a major role, in such a way that their
expectations have a direct impact on the modes of action of any service delivery
organization. Factors such as user-perceived quality have become essential elements that
bring legitimacy to any organization providing services, and thus become an important
value to be analyzed by any healthcare organization (Torres Olivera, 2003).
This scenario requires an analysis of what healthcare organizations are doing, how they are
doing it and what level of response is given to the needs and expectations of the user of
healthcare services. However, this may not be sufficient unless it is done from a
comprehensive view of healthcare processes. For instance, it is difficult to refer to concepts
such as total quality, or a comprehensive view of quality, if some issues on continuity of care
and appropriateness of healthcare processes have not been previously resolved.
The possibility of receiving comprehensive and continuous healthcare currently faces a
number of difficulties, largely caused by how the health services are organized.
Departmental segmentation is possibly due more to the interests of managers and
professionals than the needs of users. Organizations can be unnecessarily complex, and
often "super-specialization" does not properly address the diversity or multisystemic nature of
the problems that health services face. If inadequate mechanisms for coordination between
different levels of care and a poor patient-centred tradition are added, the idea of
comprehensiveness that encompasses the concept of total quality may seem a little beyond
reach (Torres Olivera, 2003 2004).
On the other hand, if the expectations of citizens regarding what they demand from
healthcare organizations, especially if they are public, are explored in depth, it is seen that
they express a desire for higher quality healthcare in terms of accessibility, effectiveness ,
safety and information. Satisfaction must be measured, but it is increasingly conditioned by
elements of comprehensiveness. In fact, poor coordination between levels of care has a
negative effect on accessibility to services, and the effectiveness and safety of clinical
performance.
Evolving from "how much" is it done to "how" is it done, is undoubtedly an important
qualitative step in healthcare organizations, and is related to a different vision of healthcare
that assumes a commitment to quality and which requires a comprehensive view of the
processes taking place in their services. The integrated approach to these care processes should
pursue the following objectives: [1] Ensure continuity of care through a continuous and shared
vision of healthcare [2] Adapt the functional structure of the services to the needs and
demands of citizens, [3] Link professional effort to the final objective, the patient outcome,
sharing responsibilities, [4] Put the resources (costs) in the right place (greater benefit).
Process management is organized through a number of key elements such as: [1] user-
centred approach, [2] greater involvement of healthcare professionals, [3] support from the
best scientific evidence available, and [4] use of integrated information systems.
Process management attempts to ensure continuity of care at all times, and is therefore
intended to seek a unique and coordinated provision of services, avoiding fragmentation of
care at multiple levels (Consejera de Salud - Regional Ministry of Health, 2001). Therefore,
process management is understood as the set of elements that are linked sequentially to
Quality Assurance and Management
276
meet the health needs of citizens. It provides a vision that goes beyond inter-level
coordination and attempts to delve into the meaning of "Care Continuity (Torres Olivera,
2001). This approach requires healthcare organizations to order the actions that are
performed in different areas, by different professionals at different times. The processes are
thus approached horizontally, involving all levels of care and all the professionals involved
in them.
Fig. 5. Care organized from an integrated view of processes
Integrated process management is an approach to patient healthcare that seeks to coordinate
resources across the health system (Fernndez, 2003). This means an integrated approach to
preventive actions and health promotion, the use of clinical practice guidelines, appropriate
criteria in the management of resource and support to diagnosis, the appropriate use of
drugs and the evaluation of results.
Critical Success Factors for Quality Assurance in Healthcare Organizations
277
This means trying to analyze working methods in the light of the best available evidence,
proposing elements for improvement so that added value is given to recipients of the
healthcare process, i.e. the citizens and patients. Process mapping a clinical unit or
department will determine its portfolio of services and its quality characteristics, as well as
establish roadmaps for patients in the healthcare setting and establish the competencies that
professionals have to develop (Mora Martnez, 2002). The approach to healthcare with a
focus on processes and the definition of roadmaps for patients allows the identification of
critical elements related to information or communication with the patient, or the
introduction of important aspects related to healthcare quality such as patient safety.
2.6 Professional competencies
The term Competence in its current sense is due to David McClelland, a psychologist at
Harvard University, an expert in motivation theory, who published an article in 1973 which
caused a radical shift at the time. The article suggested going beyond the traditional
evaluation methods in human resources management to focus on directly searching for
those behaviours that were shared by those who were excellent at their job within a specific
culture, and which differentiated them from the rest (McClelland, 1973).
From this perspective, the determination of professional competences, and the generation of
tools that manage them, becomes a key to continuing professional development (Reyes-
Alczar et al., 2011). Competence management not only encourages professional
development but also innovation in learning models and processes of exchange and
dissemination of knowledge. It also directs an organization towards professional excellence,
cooperative work and the development of models of professional recognition and
incentives.
The map of competencies of healthcare professionals should be set as a Gold Standard that
contains the knowledge, skills and attitudes desirable for developing excellent clinical
practice.
A typical competency map consists of a set of key competencies for a specific job and the
best practices that a professional should develop for optimum performance in that job. The
map should be related to the desired results and the individual and organizational
objectives. Consequently, competence refers to a person's ability to efficiently undertake a
specific job. Thus, competence has to meet certain criteria: [1] Consider the context, i.e., the
real world scenarios where these competencies have to be developed. [2] Identify the
desired results in terms of level of development, achievement or mastery of tasks or
functions. [3] Associate the level of development of each task or function with the
performance, requirement or evidence criteria. [4] Involve the areas of responsibility of the
professional.
By comparison with the competence map, the healthcare unit professionals can carry out a
process of self-assessment to establish the competence gaps, and produce individual
professional development plans that will determine the training and learning processes that
are needed for their development.
One of the most important projects currently under development in the field of competence
management is that undertaken in Andalusia (Spain) by the Andalusian Agency for
Quality Assurance and Management
278
Healthcare Quality for the Public Health Service since 2006. This accreditation model is
intended to recognize excellence of professionals through a self-assessment system that
identifies the competences that a particular professional should have, the good practices that
should be present in each job and the evidence that must be provided to demonstrate those
competences.
Fig. 6. Professional competencies
In the Competence Management Model of the Andalusian Public Health System, the
Accreditation is defined as a recognition, explicit and public, of meeting the necessary
requirements for the provision of quality care, as well as the beginning of a line of
continuous improvement by a professional. (Almuedo-Paz et al, 2011).
The Competence Management Model of the Andalusian Public Health System has defined a
total of 70 Competence Manuals, aimed at all professional healthcare groups. Specifically, 50
Competence Manuals have been published for the medical specialties, 9 for nursing
specialties, 3 for the pharmacy disciplines and another 8 for healthcare specialties.
These Competence Manuals are structured into 5 blocks and 10 criteria, each of which
contains a set of Competencies. In turn, each Competence is expressed through a set of
observable and measurable behaviours called "Best Practices". The fulfilment of Best Practice
is demonstrated through the contribution of Evidence by each professional, from their actual
practice. This Evidence is an objective tool for assessing their competence.
Critical Success Factors for Quality Assurance in Healthcare Organizations
279
Also in Spain, the Catalan Institute of Health (ICS) began Project COM-VA in 2005, a
healthcare and management competence assessment for hospital nursing professionals.
(Juve-Udine, 2007). In this model, the competencies encompassed the individual qualities
indicative of effective performance. These attributes include knowledge, abilities and
attitudes that enable the professional to make the right decisions in each case. Moreover, the
term competence also means the sphere of responsibility or professional area in which the
law gives the professional the right to make autonomous decisions. The healthcare
competencies of the COM-VA model define 6 domains: 1) caring for the patient; 2)
assessing, diagnosing and addressing changing clinical situations; 3) helping the patient to
keep to their treatment; 4) helping to ensure safety and the healthcare process; 5) facilitating
the process of adaptation and coping, 6) teamwork and adapting to a changing environment
(Juve-Udine, 2009).
2.7 Results-orientation
Results-oriented concerns in clinical management are such that some authors have stated
that "healthcare management is inconceivable without a measurement of results" (Marn-Len,
2011: 90). Healthcare units have to establish mechanisms to measure their results, as much
in terms of healthcare outcomes as in management and user satisfaction. An evaluation
programme is defined as the systematic collection of data related to a programmes activities and
outcomes that results in decisions to improve efficiency, effectiveness, or adequacy (Keller et al.,
2002; Washington County Department of Health and Environment, 1999; Patton, 1997;
Berkowitz, 1995). The evaluation process must be accompanied by a prior planning process
that delineates the compliance objectives, both those that are strategic to the unit and those
operational and care objectives of the processes. This will allow the objectives in the
Procedural Agreements made with the Corporate Management to be assessed.
In this sense, healthcare units must have a Balanced Scorecard to collect information in
summary form, identifying areas for improvement and allowing the unit to establish
benchmarking processes. The information systems of the centre (hospital, primary care, etc.)
must support the collection of information necessary to enable the unit to analyze its results
and propose actions for improvement.
According to Keller et al. (2002), an integrated evaluation programme and results-oriented
planning consists of two fundamental elements in its design. First, it involves the selection
of aims, which will clarify the objectives to be achieved. Generally, the objectives are
difficult to measure and should be broken down into measurable indicators, according to
criteria of continuity in time and external comparison. Second, it involves designing a
specific strategy to enable the achievement of those aims and objectives identified. From the
standpoint of healthcare units, the selection of an appropriate strategy will help improve
quality in terms of efficiency and effectiveness, while the identification of aims will improve
quality in terms of adaptation.
Indeed, the development of a Balanced Scorecard helps to translate the strategy of an
organization into measurable objectives. In a sense, the healthcare unit is put to the test to
see if it is capable of monitoring what it does. The Balanced Scorecard developed by Kaplan
and Norton in 1992 has gained enormous popularity in recent times. It was the result of a
year-long study that arose out of a general notion that as knowledge became a basis for
Quality Assurance and Management
280
competition, conventional financial measures were becoming obsolete (Kaplan and Norton,
1992 en Keller et al., 2010). The term balanced reflects the balanced consideration given to
long- and short-term objectives, financial and nonfinancial measures, leading and lagging
indicators, and external and internal performance perspectives (Keller et al., 2010). The BSC
is a system of causal relationships among composite indicators (Key performance areas),
that integrate large amounts of information (Key performance Indicators) into an easily
understood single metric (Lovaglio, 2011). This basic outline of corporate and business
management has also been exported to the healthcare setting. The work conducted by Baker
and Pink (1995) is highlighted among the first in this field. In that study, the authors
proposed a balanced scorecard model for hospitals with which they hoped to obtain a
balanced view between the areas for improvement identified by the organization and those
identified by patients. As Lovaglio (2011) confirms, the basic principles of a balanced
scorecard model for the health sector have been adequately agreed in the scientific literature
(Chow et al. 1998, Zelman et al. 1999), and have also been widely applied in public
healthcare systems and organizations (Inamdar, Kaplan and Bower, 2002; Northcott and
France, 2005). This reinforces the certainty of its feasibility and applicability for any
healthcare unit. The indicators of a clinical unit must include those of an operational nature
that assess processes and tasks from the standpoint of efficiency, and those of a
comprehensive nature that allow the monitoring of fulfilment of the strategic goals
previously agreed by the organization. Recently, studies have proliferated which investigate
the factors affecting the variability of healthcare. Variability attributed to medical practice
itself is, from the standpoint of clinical management, an inefficient use of resources because
resources are allocated to services of dubious effectiveness (Bernal-Delgado, 2008; Peir et
al., 2009). In other words, setting strategic goals also means avoiding variability in clinical
practice and moves the model closer to evidence-based practice.
The existence of both strategic and operational level indicators in clinical units facilitates
designing a more accurate results orientation, and thus management structures can align the
Mission, Vision and Values of the unit with the desired results. In general, it can be
theorized that a Mission of a clinical unit or department would be to efficiently and
effectively manage the resources used in its normal clinical practice. Its Vision would be to
achieve a continuity of care model to meet the expectations of patients and professionals.
Finally, the Values that underpin the daily work would be, at least, transparency, integrity,
cooperation, and scientific rigor.
In short, promoting results orientation within healthcare units provides four basic results
focused on quality improvement: 1) A set of healthcare indicators that can be subjected to
longitudinal comparison over time; 2) Another set of indicators of the satisfaction with the
care given to users/patients; 3) A map of areas that need improvement; 4) The possibility of
establishing standardized processes of comparison with the best units, or in other words,
monitoring performance using the benchmarking criteria.
2.8 Capacity of self-assessment and external assessment
The concept of Continuous Quality Improvement (CQI) should permeate the entire
development of clinical management. Initially designed for the business sphere, the concept
of CQI has been gradually incorporated into healthcare models (Chovil, 2010; Hyrks &
Lehti, 2003; LeBrasseur, Whissell, & Ojha, 2002; Shortell, Bennett, & Byck, 1998). Its adoption
Critical Success Factors for Quality Assurance in Healthcare Organizations
281
by a healthcare unit "enables it to be proactive rather than reactive by relying on a continuous
evaluation of processes and outcomes" (Chovil, 2010: 22).
Fig. 7. Results-orientation
One of the most widely used methods to achieve this has been the process of self-assessment
by professionals and healthcare units. Studies such as that of Hyrks & Lehti (2003) have
demonstrated the favourable impact of self-assessments in healthcare units on the
satisfaction perceived by patients. However, self-assessment cannot be the only means of
monitoring the performance of healthcare units. This self-assessment process must be
endorsed on a regular basis through a process of external assessment to objectively establish
achievements and examine the quality of healthcare provided by the healthcare unit.
As noted above, the external assessment of performance of a healthcare unit can be given by
indicators of satisfaction of the users/patients. In fact this is a process of external assessment
Quality Assurance and Management
282
of results focused on the evaluation by end users. However, external assessments do not
address all aspects that must be evaluated to identify the greatest possible number of
weaknesses, areas for improvement and subsequent corrective actions. All these dimensions,
much more specific regarding the efficiency of processes and reflections on the potential of
healthcare units, must be determined by agents specialized in the field of healthcare
assessment. In recent years, the commitment to healthcare quality has encouraged the
emergence of agencies, organizations and international agreements responsible for the
assessment and accreditation of healthcare professionals, centres and units.
Some of the most important international, national and regional organizations and agencies
dedicated to the accreditation of healthcare units and centres are the following.
Firstly, The International Society for Quality in Health Care (ISQua) which is a not-for-profit
organization that emerged in 1986. The International Journal for Quality in Health Care is
published on behalf of ISQua. Also, ISQua organizes an international conference which
provides a forum and meeting place for agencies specialized in accreditation and external
assessment, organizations dedicated to healthcare and all types of stakeholders.
Fig. 8. Capacity of self assessment and external assessment.
Critical Success Factors for Quality Assurance in Healthcare Organizations
283
The Joint Commission of the USA is highlighted among the accreditation and external
assessment organizations in the Anglo-Saxon sphere. This independent not-for-profit
organization was originally founded in 1917 and re-founded in 1951 with the purpose of
hospital accreditation. The stated mission of the organization is "To continuously improve
health care for the public, in collaboration with other stakeholders, by evaluating health care
organizations and inspiring them to excel in providing safe and effective care of the highest quality
and value" (Joint Commission, 2011).
The following are also highlighted in the Anglo-Saxon sphere: the Australian Council on
Healthcare Standards (ACHS), Australian General Practice Accreditation Limited (AGPAL),
Australian Quality Improvement Council (QIC), Accreditation Canada, Agency for
Healthcare Research and Quality (AHRQ) of the USA, Institute for Healthcare Improvement
(IHI) of the USA, National Committee for Quality Assurance (NCQA) of the USA and
Quality Health New Zealand.
Among the accreditation and external assessment organizations in the European sphere are
highlighted: the French National Authority for Health (HAS), Netherlands Institute for
Accreditation in Healthcare (NIAZ), Health Information and Quality Authority (HIQA) of
Ireland, Healthcare Accreditation and Quality Unit (CHKS-HAQU) of the United Kingdom,
and the Andalusian Agency for Health Care Quality (ACSA) in Spain, among others.
In Latin America are highlighted: the Technical Institute for the Accreditation of Health
Care Establishments (ITAES) of Argentina, Consortium for Brazilian Accreditation (CBA),
Superintendence of Health of Chile, and the Colombian Institute for Technical Standards
and Accreditation (ICONTEC).
Finally, in Asia and Africa are highlighted: Malaysian Society for Quality in Health (MSQH),
Health Service Accreditation of Southern Africa (COHSASA) and the Taiwan Joint
Commission on Hospital Accreditation (TJCHA).
In short, the external assessment of healthcare units through accreditation means the
certification of compliance with predetermined quality standards by an external
organization. This accreditation ensures the commitment of the healthcare unit to the
continuous quality improvement developed in its process of self-assessment.
As discussed above, there are a significant number of quality accrediting or certifying
agencies or organizations in different countries, some public but most of them private
entities. Their approaches are different even though their terms of reference (standards) are
very similar. The differences lie primarily in the field of accreditation, [a] in how the self-
assessment processes are managed, [b] in whether the assessment processes are systemic or
fragmented [c] in the possibilities of exploiting the information that results from the
certification process. In this sense a model focused on continuous improvement in the
context of a clinical unit is a model best suited to promote cultural change in healthcare
organizations. This is because they take a different approach to clinical practice compared
with models oriented to the global accreditation of health centres -which may improve some
aspects of management and organization of the centre but have little impact on actual
clinical practice- (Cutler, 2000). The continual use of external assessment results to promote
the identification of areas for improvement in ongoing self-assessment processes is an
important way of promoting real changes in the way of doing things at the level of clinical
units and departments (Schrijvers 2003).
Quality Assurance and Management
284
Fig. 9. Critical Success Factors for quality assurance in healthcare organizations.
3. Conclusion
Clinical management encourages the capacity of self-organization and professional
autonomy, it stimulates accountability in the management of the resources used in clinical
practice, and it instils the culture of continuous improvement and results orientation. It
thereby facilitates an organizational design which is more adaptable to the needs of
professionals and citizens.
Critical Success Factors for Quality Assurance in Healthcare Organizations
285
Critical success factors that can determine the proper development of clinical management
can be summarized in the following key ideas:
1. Orient health services to citizens and patients, exploring their needs and expectations,
promoting their participation by providing accurate and quality information. To ensure
the achievement of this critical success factor it is essential to measure patient
satisfaction and use this information to improve healthcare.
2. Form multidisciplinary teams which provide integrated responses and share common
goals.
3. Establish procedural agreements with corporate management which clearly set out the
commitments of both parties, agreements that signify a greater capacity for decision-
making and greater accountability on the part of the clinical units and departments.
4. Define the set of healthcare processes of clinical units and departments that address
their quality characteristics and critical safety points.
5. Determine professional competence maps for members of healthcare units, departments
and organizations, which allow individual development plans and specific training
plans to be established.
6. Set indicators so that healthcare outcomes, satisfaction, efficient resource management
and benchmarking can be measured.
7. Promote self-assessment and submit to periodic accreditation processes and/or external
quality assessment.
By taking into account the critical success factors outlined above, a management plan for a
clinical department or unit can be approached with a guarantee of success. Essentially it
involves: Optimizing the existing knowledge in the organization and putting it at the service
of citizens. Increasing the quality in healthcare processes through further development of
competence of the professionals involved in them. And finally, using a different vision of
the organization to orientate it to processes, by decentralizing decision-making and
encouraging greater involvement of professionals in corporate objectives.
4. Acknowledgment
We would like to acknowledge the research's support team of the Andalusian Agency for
Health Care Quality. This includes our research's technicians, Manuel Herrera-Usagre and
ngela Aguilar-de-Leyva, PhD, as well as the contributions Habibullah Rodrguez
Contreras, graphic designer.
5. References
Abdelrazek F., Skytt B., Aly M., El-sabour M.A., Ibrahim N. & Engstro M. M.(2010).
Leadership and management skills of first-line managers of elderly care and their
work environment. Journal of Nursing Management, vol.18, pp.736745
Akre, V., Falkum, E., Hoftvedt, B.O. and Aasland, O.G. (1997). The communication
atmosphere between physician colleagues: competitive perfectionism or supportive
dialogue? A Norwegian study. Social Science and Medicine, vol.44, no.4, pp.51926
Alford, R.R. (1975). Health Care Politics, University of Chicago Press, Chicago
Quality Assurance and Management
286
Almuedo-Paz A, Brea-Rivero P, Buiza-Camacho B, Rojas-De-Mora Figueroa A, Torres-
Olivera A. (2011). Skills Accreditation as an impetus for continuous professional
development. Revista de Calidad Asistencial, Vol.26, no.4, (forthcoming)
Bernal-Delgado, E. (2008). How can we improve effectiveness (quality) by reducing the gap
between research and action? 2008 SES-PAS Report. Gaceta Sanitaria. vol.22, no.1,
(April 2008) pp.19-26
Byrne, P. & Long, B. (1976). Doctors Talking to Patients, HMSO, London:
Camprub, J. (2011). Una nueva forma de trabajar que mejora las decisions: Gestin Clnica
de la Efectividad, Una nueva forma de trabajar mirando al futuro III Congreso de
Gestin Clnica, pp. 79-85, ISBN 978-84-694-2735-4, Madrid, Spain, Oct 18-19, 2010.
Chovil, N. (2009). One Small Step at a Time: Implementing Continuous Quality
Improvement in Child and Youth Mental Health Services. Child and Youth Services,
vol.31, no.1, pp.21-34.
Chow, C.W., Ganulin, D., Teknika, O., Haddad, K., Williamson, J. (1998). The balanced
scorecard: a potent tool for energizing and focusing healthcare organization
management. Journal of Healthcare Management. Vol.43, no.3, pp.263280
Christian, S.L., Norman, I.J. (1998). Clinical leadership in nursing development units. Journal
of advanced nursing, vol.27, no.1, pp.108-116
Cunningham, G. & Kitson, A. (2000). An evaluation of the RCN Clinical Leadership
Development Programme: Part 2. Nursing Standard, vol. 15, no. 13-15, pp. 34-40.
Cutler, D. McClellan, M. Newhouse, J. (2000). How does managed care do it? Rand Journal
Economist vol.31, pp.526-48
Castells, A. (2011). Gestin Hospitales basada en resultados: Hospital Clinic de Barcelona,
Una nueva forma de trabajar mirando al futuro III Congreso de Gestin Clnica, pp.
105-109, ISBN 978-84-694-2735-4, Madrid, Spain, Oct 18-19, 2010
Deem, J.W., Barnes, B., Segal, S. & Preziosi, R. (2010). The Relationship of Organizational
Culture to Balanced Scorecard Effectiveness. S.A.M.Advanced Management Journal,
vol. 75, no. 4, pp. 31-39
Fernndez Fernndez, I., Fernndez de la Mota, E., Sanz Amores, R. (2003). Gestin por
procesos asistenciales: aplicacin a un sistema sanitario pblico. Cuadernos de
Gestin vol.9 pp.19-37
Friedson, E. (1960). Client control and medical practice. American Journal of Sociology, vol.65,
pp.374-382.
Consejera de Salud (2001). Gua de diseo y mejora continua de procesos asistenciales: calidad por
sistema. Available from: http://www.juntadeandalucia.es/salud ISBN 84-8486-024-8
Harrison, S. & Dowswell, G. (2002). "Autonomy and bureaucratic accountability in primary
care: what English general practitioners say [Autonomie et responsabilit
bureaucratique en soin primaire : ce que disent les praticiens gnralistes Anglais].
Sociology of health & illness, vol. 24, no. 2, pp. 208-226
Hyrkas, K. & Lehti, K. (2003). Continuous quality improvement through team supervision
supported by continuous self-monitoring of work and systematic patient feedback.
Journal of nursing management vo.11, no.3, pp.177-88
Inamdar, N., Kaplan, R.S., Bower, M. (2002). Applying the balanced scorecard in healthcare
provider organizations. Journal of Healthcare Management, vol.47, pp.179195
Joint Commission Resources. (March 2009). The New Standards: Section 3. Leadership.
18.7.2011. available from http://www.jcrinc.com/The-New-Standards/The-New-
Standards-Section-2-Improving-Organ/The-New-Standards-Section-3-Leadershi/
Critical Success Factors for Quality Assurance in Healthcare Organizations
287
Joint Commission. Resources. (July 2011). 2011 Accreditation Process Guide for Hospitals.
18.7.2011. available from http://www.jcrinc.com. ISBN: 978-1-59940-400-4
Juv-Udina ,M.E., Farrero, S., Matud, C., Monterde, D., Fierro, G., Marsal, R. (2007). Cmo
definen los profesionales de enfermera hospitalarios sus competencias
asistenciales? Nursing vol.25 no.7 pp.50-61
Juv-Udina, M.E., Farrero Muoz, S., Matud Calvo, C., Rius Ferrus, L., Monterde Prat, D.,
Cruz Llauna, R., Artigas Lage, M. (2009). Pesos competenciales asociados a las
diferentes reas de cuidados en el mbito hospitalario. Nursing vol. 27, no.7, pp.54-58
Kaplan, R. S., & Norton, D. P. (1992). The Balanced Scorecard: Measures that drive
performance. The Harvard Business Review, vol.70, no.1, pp. 71-80
Kapur, N., Appleton, K. & Neal, R.D. (1999). Sources of job satisfaction and psychological
distress in GPs and medical house officers. Family Practice, vol. 16, no. 6, pp. 600
601
Knol, J. & van Linge, R. (2009). Innovative behaviour: the effect of structural and
psychological empowerment on nurses. Journal of Advanced Nursing, vol. 65, no.2,
pp.359370
Laine, C. & Davidoff, F. (1996). Patient-centered medicine: a professional evolution. Journal
of the American Medical Association, vol. 275, pp. 152-156.
LeBrasseur, R., Whissell, R. & Ojha, A. (2002). Organizational learning, transformational
leadership and implementation of continuous quality improvement in Canadian
hospitals. Australian Journal of Management, vol.27, no.2, pp.14162
Lewis, J.M. (2006). Being Around and Knowing the Players: Networks of Influence in Health
Policy. Social science & medicine, vol. 62, no. 9, pp. 2125-2136
Linda, O.K., Schaffer, M.A., Lia-Hoagberg, B. & Strohschein, S. (2002). Assessment, program
planning, and evaluation in population-based public health practice. Journal of
Public Health Management and Practice, vol. 8, no. 5, pp. 30-43
Lovaglio, P.G. (2011). Model building and estimation strategies for implementing the
Balanced Scorecard in Health sector. Quality and Quantity, vol. 45, no. 1, pp. 199-212
Marn-Len, I. (2011). Gestin de Hospitales basada en resultados, Una nueva forma de
trabajar mirando al futuro III Congreso de Gestin Clnica, pp. 89-94, ISBN 978-84-
694-2735-4, Madrid, Spain, Oct 18-19, 2010.
McClelland, D. (1973). Testing for Competence Rather Than for Intelligence. American
Psychologist, vol.28, no.1, pp.1-14
McKinlay, J.B. & Arches, J. (1985). Towards the Proletarianization of Physicians. International
Journal of Health Services, vol. 15, no. 2, pp. 161-195
Mead, N. & Bower, P. (2000). Patient-Centredness: A Conceptual Framework and Review of
the Empirical Literature. Social Science and Medicine, vol. 51, no. 7, pp. 1087-1110
ISSN: 0277-9536
Mickan, S.M. (2005). Evaluating the effectiveness of health care teams. Australian Health
Review, vol. 29, no. 2, pp. 211-217
Mickan, S.S. & Rodger, S.S. (2000). Characteristics of effective teams: a literature review.
Australian Health Review, vol. 23, no. 3, pp. 201-208
Millward, L.J. & Bryan, K. (2005). Clinical leadership in health care: a position statement.
International journal of health care quality assurance, vol. 18, no. 2, pp. R13-R13-R25.
ISSN: 09526862
Quality Assurance and Management
288
Mora Martnez, J.R., Ferrer Arnedo, C., Ramos Quirs, E. (2002). Gestin clnica de procesos:
mapa de procesos de enfermera en centros de salud. Revista de Administracin
Sanitaria vol. 6, pp.135-59
National Health Service Scotland (2004) Leadership Development Framework for Discussion.
NHS, Scotland.
Northcott, D. & France, N. (2005). The balanced scorecard in New Zealand health sector
performance management: dissemination to diffusion. Australian Accounting
Review, vol.15, no.37, pp.3446
Patton, M.Q. (1997) Utilization-Focused Evaluation. Thousand Oaks, Sage Publications,
California, USA
Peir, S., Meneu, R., & Bernal-Delgado, E. (2009). Effectiveness, variation and inequalities.
Hysterectomies and prostatectomies due to neoplasm in Spain (2002-2004). Revista
Espaola de Salud Pblica, vol. 83, no. 1, pp. 109-121
Reyes-Alczar, V., Salvador-Sanz, A., & Segura, C. (2011). Mapa de competencias y buenas
prcticas de los profesionales de una UGC del corazn. In: Gestin Clnica en
Unidades del Corazn, Torres-Olivera, A. and V. Reyes-Alczar, (Ed.), 93-118,
Sociedad Espaola de Calidad Asistencial, ISBN 978-84-615-0671-2, Madrid, Spain
Schrijvers, G., Oudendijk, N. & ,de Vries, P. (2003). In search of the quickest way to
diseminate health care innovations. International Journal of Integrated Care, Vol. 3,
pp.1-22, ISSN 1568-4156
Schulz, R.I., Girard, C., Harrison, S. & Sims, A.C.P. (1991). Perceived autonomy and work
satisfaction amongst psychiatrists. Journal of Management in Medicine, Vol. 5, no. 2,
pp. 5465
Shilton, T. (2009). Health promotion competencies: providing a road map for health
promotion to assume a prominent role in global health. Global Health Promotion, vol.
16, no. 2, pp. 42-46, 61, 75
Shortell, S. M., Bennett, C. L., & Byck, G. R. (1998). Assessing the impact of continuous
quality improvement on clinical practice. The Millbank Quarterly vol. 76, 593624
Torres Olivera, A., Fernndez, E., Paneque, P., Carretero, R., & Garijo A. (2004). La Gestin
de la calidad asistencial en Andaluca. Revista de Calidad Asistencial, vol.19, no.3, pp.
105-112
Torres Olivera, A., Lled, R. (2001) La coordinacin entre niveles asistenciales. Revista de
Calidad Asistencial vol. 16, pp.232-234
Torres Olivera, A. (2003). Desarrollo de los Procesos Asistenciales Integrados en Andaluca.
Cuadernos de Gestin, vol.9, pp.127-134
Torres Olivera, A. (2003). La gestin por Procesos Asistenciales Integrados: una estrategia
necesaria. Atencin Primaria, vol.31, pp.561-563
Torres Olivera, A., Reyes-Alczar, V. (2011). Gestin Clnica en Unidades del Corazn, Sociedad
Espaola de Calidad Asistencial, ISBN 978-84-615-0671-2, Madrid, Spain.
Washington County Department of Health and Environment. (1999). Community Health
Service Plan, 19921996 and 1996 2000. Department of Health and Environment.
Stillwater, MN: Washington County, USA
West, B., Lyon, M.H., McBain, M. & Gass, J. (2004). Evaluation of a clinical leadership
initiative. Nursing Standard, vol. 19, no. 5, pp. 33-41
Zelman, W.N., Blazer, D., Gower, J.M., Bumgarner, P.O., Cancilla, L.M. (1999). Issues for
academic health centers to consider before implementing a balanced-scorecard
effort. Academic Medicine, vol.74, no.12, pp.12691277
16
The ACSA Accreditation Model:
Self-Assessment as a Quality Improvement Tool
Antonio Almuedo-Paz, Diego Nez-Garca,
Vctor Reyes-Alczar and Antonio Torres-Olivera
Andalusian Agency for Health Care Quality
Spain
1. Introduction
Excellence in healthcare is based on the concept of "continual improvement". It must start
from the premise that everything we do is always capable of being improved (Pomey et al,
2005). It is not an isolated action, but rather a culture and a dynamic concept that must
backbone the entire organization without impediment. This know how will allow the
reinforcement of strengths and the reduction of those weaknesses (Lorenzo, 2004) found
when making a previous consideration of how everyday practice is performed and how it
can be improved.
The quality and safety of care is found in all European policy agendas, which currently
show differences in the quality of services provided (Lombart et al, 2009). Consequently
strategies are suggested to improve quality and safety in different health systems.
Healthcare institutions have a social responsibility to respond to health-related needs with
the provision of important services, that are equitable, cost effective and of high quality.
Similarly, health professionals have the responsibility to remain competent to attain
standards of excellence, generate and disseminate knowledge and commit to defending the
interests and welfare of patients, responding to the health demands of society (Perez &
Oteo, 2006).
The above is generally assumed by everyone involved in improving health services, such as
health institutions, scientific societies, professional associations and the professionals
themselves. Consistent with this, we are living at a time of expansion of continuing
education activities (Pardell, 2005), that are accompanied by a significant investment in
resources. Similarly, significant efforts are being made to promote the accreditation and
quality of healthcare institutions (Pomey et al, 2005).
However, what methodology should be followed? The better this "know how" is carried out
the closer results will be to excellence, and it must be done by measuring results and
performance (Laing, Hohh & Winkelman, 2004) and taking into account the meanings of
effectiveness and efficiency. In this context, the concept of accreditation is used as a tool to
drive the continual improvement of care quality. The detection of areas for improvement is
highlighted as one of the main strengths of the process (Aranaz et al, 2003). This
Quality Assurance and Management
290
accreditation process may include a serie of essential interventions to facilitate and
encourage professionals and organizations to assess themselves (Claveria, 2004),
participating in identifying and prioritizing problems and developing areas for
improvement. It is essential that this reflection involves the largest number of professionals,
including managers (Gutt et al, 2006), something that can enrich the process. Performance is
compared with expectations and objectives, thereby identifying opportunities for
improvement. Many accreditation models use self-assessment as a reflection tool that allows
the identification of the strengths and areas for improvement of the organization
(Viswanathan & Aslmon, 2006, Giraud, 2001, Greenfield & Braithwaite, 2008).
2. Self-assessment in professional development
Among the methodologies for the evaluation of competence, the portfolio is characterized
by developing a self-assessment phase. This reflection exercise is one of the strengths of the
portfolio (Arnau-Figueras & Martinez-Carretero, 2007; Prados, 2005). That is why the self-
assessment phase of the process is the main generator of benefits for the continuing
professional development (CPD) of those professionals who undertake the assessment
process (Almuedo-Paz et al, 2011).
There are several experiences of the use of the portfolio in postgraduate education and its
role in CPD support (Tochel et al, 2009). Similarly, in the health professions self-evaluation
is used to induce continual improvement in professional work (Casey & Egan, 2010; Cowan,
Wilson-Barnett, & Norman, 2007; O'Neill & Kurtz, 2001). In the health field, this type of
competence evaluation based on self-assessment is most widespread at the resident stage
(Caverzagie, Shea & Kogan, 2008; Pasquina, Kelly & Hawkins, 2003; Staccini & Rouger,
2008).
2.1 Self-assessment in health institutions
With regard to models of self-assessment of quality, the EFQM (European Foundation for
Quality Management) Excellence Model is the most widely accepted with regard to self-
assessment (Del Rio et al, 2006, Brun et al, 2004 ; Pariente et al, 2004; Martnez-Pillado, 2008;
Editorial Committee, 2004), allowing total quality management to be applied in the health
sector to obtain better results (Ugalde, 2003). However, the complexity of adapting it to
primary and specialized care decreases its applicability (Arcelay et al, 1998). Importantly,
among the models for the accreditation of quality specific to the health sector, there is an
important commitment to self-assessment as a cornerstone of the accreditation process, such
as in the Australian Council on Healthacare Standards (Greenfield & Braithwaite, 2008 ),
Haute Autorit de Sant (Fortes, Mattos & Baptista, 2011) and Accreditation Canada
(McCurdy et al, 2009).
As the result of a need for a model more suited to the healthcare reality, already demanded
in public health organizations (Guix Oliver, 2005), and favoured by further development of
specific continual improvement tools that enable management of healthcare quality (Torres-
Olivera et al, 2004), the ACSA accreditation model was born (Almazn-Gonzlez, 2006). In
this model, professionals and institutions that initiate the process, at the first stage of self-
assessment, have reference standards that address aspects of quality related to the citizen,
professional, healthcare processes, support elements and results. The working methodology
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
291
is to reflect on what is done today to reach those standards (objectifiable facts or positive
evidence), how it can be demonstrated, what results are obtained and how they can be
improved (where work needs to be done to strengthen or achieve compliance), that is, areas
for improvement, a cornerstone in the process of continual improvement. The greater
number of professionals that work on accreditation projects, the more enriching are the
improvement cycles that are designed. In this model, professionals can participate as
assessors (reflecting on the implementation and improvement of standards) and as agents
for improvement (they are responsible for implementing the identified improvements).
This model attempts to identify areas or activities where attention must be focussed to
achieve higher quality levels in institutions throughout the whole Health System, whilst
promoting the development of a culture of quality and transparency based on continual
improvement.
3. ACSA model of accreditation
The Andalusian Agency for Healthcare Quality was founded in 2002 as part of the strategy
promoted by the Andalusian Regional Ministry of Health, to improve and ensure quality in
the healthcare provided to citizens within the Andalusian Public Health System (SSPA).
Quality plans of the Andalusian Regional Ministry of Health arise from a firm commitment
to excellence, innovation and professional development. One of its strategic processes is
focused on "ensuring the management of quality in the health services."
These strategic lines include the development of the accreditation programmes of the
Agency for Healthcare Quality, based on the continual improvement of quality and the
progress and development of professionals.
At this time, the Agency has established and implemented its own unique accreditation
model, has designed a series of accreditation programmes as tools for the continual
improvement and safety at the service of the professionals, units and organizations, and has
established a methodology that facilitate their application in practice and maximizes results.
3.1 The accreditation model
Accreditation is seen as the process that observes and recognizes how the healthcare
provided to citizens responds to our quality model, always with the aim of encouraging and
promoting continual improvement of our institutions, professionals, training, etc.
From this perspective, the accreditation model of the Andalusian Health System boasts a
number of typical characteristics:
It is consistent with the plans and management tools for continual improvement in the
SSPA: clinical management, process management, competence management and
knowledge management.
The standards present in the different programmes reference the health regulatory
framework of Andalusia, the strategic elements of the SSPA, the recommendations on
best practice, safety elements, the needs and expectations of citizens, the results of
satisfaction surveys, etc.
Quality Assurance and Management
292
It addresses quality from an integrated approach, through a series of accreditation
programmes targeting different elements involved in healthcare: health centers and
clinical management units, continuing education, professional competences and web
pages.
It has a progressive nature, identifying different stages or degrees of progress towards
excellence. Going beyond an isolated benchmark or a recognition obtained at a given
time, accreditation is a dynamic, continual and evolving process that reflects and
reveals not only the situation at the time of its implementation but also, above all, the
potential for development and improvement to grow in quality.
The accreditation model of the Andalusian Health System provides a common framework
for all accreditation programmes within it.
3.2 The accreditation programmes
The Agency has accreditation programmes in several areas:
Programmes of accreditation of centres and units (hospitals, primary care and hospital
clinical units, haemodialysis units, clinical laboratories, diagnostic imaging units and
blood transfusion centers).
Programmes of accreditation of professional competences for 70 different health
disciplines.
Accreditation Programmes for continuing education (activities, programmes and
centers for continuing education).
Programmes of accreditation of healthcare web sites.
Accreditation programmes share the same structure and contemplate, from each of their
perspectives, the same key areas of quality management. They are grouped into five blocks,
five dimensions around which are grouped the content of the various programmes. These
blocks are related to:
- The citizen
- Integrated health care
- Professionals
- Areas of support
- Efficiency and results
Each programme is developed with the participation of the professionals in the Health
System through technical advisory committees.
3.3 Methodology
Our accreditation model grants a role to self-assessment in all the programmes. Continual
improvement is based on the immense potential possessed by the people and organizations.
In the self-assessment phase, different groups or professionals identify their current
position, determine their aspirations and plan actions to achieve them.
Self-assessment creates a space for consensus and shared improvement in which the
different actors are involved (professionals, managers and citizens).
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
293
For example, in the process of accreditation of centres and units, the professionals analyze
the standards and their purpose and reflect on:
What is done? and How can it be demonstrated?, from where those positive evidences
arise.
What are the results? How can they be improved?, Questions that lead to areas for
improvement.
Similarly, in the process of accreditation of competences, during the self-assessment the
professional examines the competences and good practices related to the achievement of
outstanding results in their work, and provides evidence and proof of the presence of these
good practices in their daily performance.
The accreditation model starts with reference standards with which the centres,
professionals, units, etc. move towards improving services to citizens and the
implementation of management tools to improve quality.
From our view of quality, the standards are a continually evolving system which the citizen
contributes to by incorporating their needs and expectations. Its definition, review and
continual updating give dynamism to the processes of accreditation.
Accreditation also means an explicit and public recognition that the requirements needed to
develop quality care have been fulfilled, and that a line of continual improvement has been
undertaken. As a tool, and not an end in itself, accreditation promotes and encourages
processes of improvement and evaluation within the health system.
The road proposed for continual improvement involves the entire organization, from the
highest management to the entire group of people who work there, all of whom must be
firmly committed to this process.
Additionally, given that accreditation has been regarded as a dynamic process, it should not
be understood as the end of a road, but as an opportunity to establish new and alternative
paths to improve quality.
External evaluation is another of the common elements of the accreditation process, for both
centres and professional competences. At this stage, teams of the Agencys surveyors
observe and recognize the evidence presented (documents, by observation, in
interviews)that are associated with different elements of quality and safety, and identify the
level of accreditation obtained, the strengths, the potential and the areas for improvement.
Each of the phases, and especially self-assessment, are based on a series of Web-based
applications called ME_jora developed by the Andalusian Agency for Healthcare Quality,
which allows each accreditation process to be conducted securely and with the support of
Agency professionals, and also enables the dissemination and exchange of knowledge and
the elements of quality identified in them.
4. Accreditation programme for healthcare units
As in the other accreditation programmes, the standards for the accreditation of clinical
units are divided into three groups:
Quality Assurance and Management
294
The standards of group I relate to the vested rights of citizens, the aspects related to the
safety of citizens and professionals, the ethical principles that should be contemplated
in all healthcare policies and those priority items for the SSPA.
In group II the standards include those elements associated with the further
development of the organization (information systems, new technologies and
redesigning of organizational spaces).
The group III standards relate to showing that the clinical unit generates innovation and
development for society in general.
Group I includes those standards that are considered mandatory and therefore must
necessarily be present and stabilized to achieve any level of accreditation.
The following table summarizes the distribution of programme standards for clinical
management units by type of standard:
Standard Type Definition
Group I
Standards that provide for the vested rights of citizens, issues related to
the safety of citizens and professionals, the ethical principles that
should be contemplated in all activities of the clinical management
units and those priority items for the Andalusian Public Health System
Group II
Standards governing elements associated with the further
development of the organization (information systems, new
technologies and redesigning of organizational spaces)
Group III
Includes those standards that demonstrate that the clinical
management unit generates innovation and development oriented to
society in general
Table 1. Distribution of programme standards for accreditation of clinical unit.
4.1 Results of accreditation
The accreditation model articulates progression in different grades, each more complex and
demanding than before, thereby facilitating continual improvement. Accreditation levels are
advanced, optimum and excellent.
However, as long as the system is constantly evolving and seeking ways to improve, it
would be wrong to understand the final grade as a final or last stage. Rather (and as a result
of improvements that will occur due to new technologies, new services, new forms of
organization and new demands from the citizen user and professional user), the standards
established for the various grades will be updated periodically. For example, what can be
seen today as far for any system, with continual improvement, may be excellence tomorrow.
Ultimately, the accreditation model for the Andalusian Health System is a useful
methodological tool that allows checking of the extent to which activities are carried out
according to quality standards, and the light of external evaluations provides public and
express recognition of those institutions and professionals who comply and demonstrate
such.
The result of the accreditation process can be:
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
295
Pending the stabilization of obligatory standards: situation is maintained until the plans for
improving the clinical unit meet the obligatory standards of group I. Achieving these will
qualify for some level of accreditation.
Accreditation - Advanced: accreditation obtained by achieving over 70% compliance with
group I standards (all those considered obligatory are included within this percentage).
Accreditation - Optimal: is reached when there is 100% compliance with group I standards
and more than 70% compliance with group II standards.
Accreditation - Excellent: the level of excellence is achieved when there is 100% compliance
with group I and group II standards, and more than 70% compliance with group III
standards.
After obtaining an accreditation rating of advanced or optimal, clinical management unit,
after at least a year, may voluntarily choose to attempt accreditation in successive ratings.
4.2 Structure of the standards manual
The manual of standards of clinical management units is divided into five blocks and eleven
criteria, which are described below:
I. The person, central to the Health System
The person as an individual asset
Accessibility and continuity of care
Clinical information
II. Organization of person-centred activity
Management of integrated healthcare plans and processes
Health promotion in the community
Clinical unit management
III. Professionals Clinical unit professionals
IV. Support Processes
Structure, equipment and suppliers
Information systems and technology
Continual improvement
V. Results Clinical unit results
Table 2. Structure of accreditation programmes for clinical units
I. The person, central to the health system
This block represents 24.77% of all standards in the manual, referring to the rights,
expectations and participation of users, proffesionals and units petitioning of the clinical
unit; to the elements related to privacy and accessibility to available resources; to the
relationship between professionals and healthcare and to interdisciplinary actions linked
with the use and safekeeping of the clinical and personal information of the user. There is
differentiation into three criteria:
The person as an individual asset
Accessibility and continuity of care
Clinical information
II. Organization of person-centred activity
This block constitutes 22.94% of the standards contained in the manual. They primarily
concern issues related to:
Quality Assurance and Management
296
Management of integrated healthcare plans and processes
Health promotion in the community
Management of the clinical unit
III. Professionals
These account for 11.01% of all standards and cover from the induction of professionals to
the adequacy of professional resources for care, while facilitating the updating of their
competences and professional development and enhancing research work in the clinical
unit.
IV. Support processes
This block accounts for 30.28% of the standards in the manual, and is dedicated to the
management of the structure of the centre and its facilities, supply processes, equipment,
safety measures and functionality for users and professionals to achieve the proposed
objectives. It analyzes the areas relating to new technological advances in the field of
information technology, the protection of personal data and strategies for managing risks
and specific quality plans. It is differentiated into the following three criteria:
Structure, equipment and suppliers
Information Systems and Technology
Continual Improvement
V. Results
Finally, there is a set of standards which make up 11.01% of the contents of the manual and
which reflect the results obtained by the clinical unit in terms of activity, efficiency,
accessibility, satisfaction and scientific- technical quality.
4.3 Phases of the accreditation programme
PHASE 1. Preparation. Application for accreditation and introductory visit
The head of the unit requests the Andalusian Agency for Healthcare Quality to start the
accreditation process by completing an application in the ME_jora C program, available on
the website of the Andalusian Agency for Healthcare Quality at http://www.
juntadeandalucia.es / agenciadecalidadsanitaria.
This application results in joint planning of the whole process of accreditation between the
unit and the Agency.
Subsequently, the Andalusian Agency Healthcare Quality appoints a project manager, and
the unit names an internal accreditation process manager to facilitate the development of the
process and communication with the Agency.
Finally, by agreement with the unit, a visit is planned to present the accreditation process.
PHASE 2. Internal focus: self-assessment
Self-assessment is conceived as the permanent testing of the areas for improvement in the
organization. The standards manual is taken as a reference for this assessment. During this
phase, the professionals in the unit conduct an exercise of reflection, and must observe the
strengths (i.e. positive evidence) and in turn identify areas for improvement.
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
297
Fig. 1. Phases of the accreditation program.
Self-assessment has the following objectives:
To provide the unit with a way towards continual improvement and towards
accreditation through:
To identify strengths, in order to maintain, and even improve them. To identify
areas for improvement in order to work on them and turn them into strong
points.
The expansion of information on the purpose, scope of the standard and the
provision of examples of good practice.
To enable periodic self-assessment, both within and outside of the accreditation cycle,
to assess progress on an ongoing basis.
To promote learning and knowledge management in the health system.
In the design of self-evaluation, a qualitative approach has been chosen to determine the
level of compliance using the Deming PDCA cycle.
Thus, by following the PDCA (Plan - Do - Check - Act) method for each of the standards, we
develop a continual improvement cycle. This prevents the compliance with a standard
remaining as a static fact, or point, associated with the moment of assessment. By using the
PDCA cycle of continual improvement it is intended that the organization review its
approach to compliance with standards. It must PLAN ahead, DO what is required, CHECK
the effectiveness of the standard and ACT to improve implementation and development,
thus ensuring the consolidation and stabilization of the standard over time.
In turn, stabilization of a standard does not only involve the compliance with it, it also
involves the mobilization of the unit in a process that will ensure future compliance.
The unit will therefore review which phase of the PDCA cycle (Plan, Do, Check, Act) each
standard is at, according to the steps described in the table below:
Quality Assurance and Management
298
PHASE PRECIS STEP
PRIOR
Preliminary
improvement profile
The influence of the standard on the organization
has been determined prior to starting the
accreditation process
PLANNING
Specify objective and
information system
Indicators have been defined that identify the
attainment of the standard
Plan
The actions needed to achieve the standard have
been defined
Define functions
The responsibilities and human resources needed
to meet the standard have been identified and
assigned
Communicate
All those involved in the initial process to reach the
standard have been informed of the plans
Proportion resources
All the resources (materials, training, etc.) needed
to achieve the standard are defined and assigned
COMPLIANCE Complies
The purpose of the standard is achieved in
accordance with its influence and with the defined
indicators.
EVALUATION Appraise
Non-conformities have been identified in the
results
ADAPTATION Correct and enhance
Actions have been undertaken to eliminate the
observed non-conformities
Table 3. Phases of the improvement cycles
The standards manual is based on a software application that:
Provides accessibility to the accreditation process with secure access via user profiles
from any post or workplace in the healthcare unit.
Acts as a document manager for all the information generated in the accreditation
process.
The self-assessment phase consists in turn of the following phases:
1. The management team sets the objectives and action plan for the self-assessment of the
clinical management unit.
How the self-assessment will be deployed, and the format for internal and external
communications, etc, will be determined in the planning.
A manager is designated in the unit for the accreditation process.
It is advisable to appoint a manager for the accreditation process in the unit, who will
assume the role of key person in organizing and coordinating the whole process and
communicate with the Andalusian Agency for Healthcare Quality. Their main functions will
be to:
Set the schedule to be followed and ensure compliance.
Participate in the selection of assessors, giving them support and help in training.
Establish and conduct meetings of the assessors.
2. The assessors are selected and assigned to certain standards.
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
299
A group of assessors is designated in this phase, depending on the size of the unit. It is
recommended that these assessors be multidisciplinary, as this will enhance learning and
creation of organizational knowledge. Given the dynamic nature of both standards and the
process itself, this team should not only be for a one-time-only self-assessment exercise, but
rather should continue to work on identified areas for improvement and on the
recommendations of the external evaluation, and would regularly update the self-
assessment. To promote teamwork and make it efficient, it is also advisable to divide the
standards among professionals who will participate in the self-assessment.
The assessors are trained in handling the IT application.
The unit manager of the accreditation process will provide the assessors with:
The complete standards manual and the list of standards upon which each will perform
self-assessment.
Access to software where groups can register positive evidence, the areas for
improvement and the degree of compliance according to the PDCA cycle.
The manager for the accreditation process of the Andalusian Agency for Healthcare Quality
will be responsible for providing sufficient training to ensure the management of the
software and the monitoring of the process.
3. The self-assessment files are completed.
Coordinated by the internal manager of the accreditation process, the working group
reviews the standards and completes the forms in the software application available on the
Web. The review of standards entails reflection on whether the standard is met, in which
case the positive evidence supporting it must be described. If there was no evidence to
demonstrate compliance with the standard, the self-assessor must describe the areas for
improvement that the clinical management unit should address in order to comply and
stabilize the standard. The software allows the attachment of files to the positive evidence
and improvement, for thus acting as a document manager.
4. The self-assessment group shares the findings (positive evidence and areas for
improvement) and finalizes the self-assessment.
5. The results from the assessment are then pooled, and some of the responses are
clarified, and the information shared and completed.
6. Priority is given to the positive evidence and areas for improvement. After sharing the
results obtained by the different groups, the areas for improvement are approached
globally, searching for common lines of action. The software allows the prioritization,
planning and allocation of managers of the areas of improvement.
7. The improvement plans are developed and implemented. The software allows the
description of actions for each area of improvement, which along with the ability to
plan and designate managers, makes it an easy management system for continual
improvement in the unit.
8. The process of self-assessment Is evaluated and improved. Finally, the process of self-
assessment is contemplated as a learning formula, to introduce improvements and thus
prepare the successive self-assessments. The software has a results module that
facilitates and supports the planning, monitoring and achievement of the actions arising
from the management of improvement made in the self-assessment phase.
Quality Assurance and Management
300
PHASE 3. External approach. Evaluation visit
Once the self-assessment phase is completed, a visit will be made by the team of surveyors
from the Andalusian Agency for Healthcare Quality, who will study the self-assessment and
perform an external evaluation. This visit will planned with the agreement of the
management team of the clinical unit.
Thus, throughout this phase, the evaluation team of the Andalusian Agency for Healthcare
Quality is responsible for verifying compliance with the standards based on positive
evidence and areas for improvement provided by the healthcare unit during the self-
assessment and on other significant evidence that will be collected during the visit and that
will be in the form of documents, interviews, and direct observation.
PHASE 4. Reports
After the external evaluation visit, the evaluation team of the Andalusian Agency for
Healthcare Quality prepares a progress report which specifies the degree of compliance
with standards and recommendations.
This report is sent from the Andalusian Agency for Healthcare Quality to the management
team of the unit.
PHASE 5. Monitoring and collaboration between the clinical unit and the Andalusian
Agency for Healthcare Quality
A specific module in the ME_jora C application has been defined and implemented in order
to carry out accreditation project monitoring over the five year validity period of
accreditation.
The objectives of the follow-up phase are:
Consolidate the results obtained by the stabilization of standards compliance over five
years.
Maintain and increase the momentum of improvement through the implementation of
identified areas for improvement, along with the opportunity to continue identifying
new areas for improvement.
After obtaining accreditation, the unit has the self-assessment monitoring sheet available, so
that at two and four years from the date of accreditation a follow-up evaluation is carried
out consisting of the following four sections:
Analysis of the prior considerations about structural and organizational changes that
could have been produced in the clinical unit and that could affect the scope of
accreditation.
Positioning and analysis of compliance with the mandatory standards, in order to
ensure maintenance of compliance over time.
Update of the areas for improvement identified in the self-assessment phase yet to be
fulfilled.
Update indicators of activity and healthcare processes over the last two years.
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
301
5. Professional competences accreditation programme
5.1 Conceptual framework
The professional competences accreditation programme of the SSPA has been designed to
recognize the achievements of professionals in real and daily practice, and as a tool to
promote professional development and continual improvement.
The accreditation programme is based on the methodological and conceptual framework of
management by competences, as a comprehensive model for configuring the processes of
selection, performance appraisal, training management, promotion and incentives.
The concept of competence refers to a capacity or stable personal characteristic causally
related to desirable outcomes in an organization.
A key element of management by competences is identifying these capacities as measurable
elements. The most coherent acceptance of the competencies approach is that which
considers them as a set of observable behaviours which are measurable in a reliable and
valid way, and causally related to good or excellent performance.
In the healthcare system, and in its measurement, competence is defined as the ability of
health professionals to integrate and apply knowledge, skills and attitudes associated with
the "good practices" of their profession to resolve the situations that arise.
This conceptual approach focuses on what the professional does. For the professional to
develop good practices, i.e., the observable behaviours associated with a competence (to do),
it is necessary for all five components of the competence to be present: to know it
(knowledge), know-how to do it (skills), know how to be (attitudes), want to do it
(motivation) and the ability to do it (professional competence and means) (Fig. 2).
Fig. 2. Components of the competence.
Quality Assurance and Management
302
The set of competences required by a professional in a job is their "competence map". It
identifies competencies and the best practices (observable behaviours) associated with them,
as well as the evidence (or verification criteria for determining the presence of good
practices) and tests (measurement and evaluation tools that determine compliance of the
evidence of good practice integrated in a professional competence).
As described above, most of the tests to determine compliance with the evidence included in
the competence accreditation programme are based on "what the professional does" (in real
situations, in their results, and so on.), as an ideal way to recognize and accredit professional
competences.
The accreditation of professional competences is conceived as a process that systematically
observes and recognizes the proximity between the competences that a professional really
has and those defined in the competence map (Almuedo, 2006).
The manuals for the accreditation of health professionals have been developed with the
participation of over 600 professionals and representatives from 70 scientific societies, which
have formed technical advisory committees, one for each discipline or specialty, each of
which has developed its specific manual of competencies.
Each of these technical committees has identified the competencies that a particular
professional must possess, as well as the good practices that should be present in the
performance of their work.
In all the manuals, the professional competences are grouped around 5 blocks and 10
criteria, which address the quality model of the Andalusian Public Health System (Table 4)
Block I The citizen 1. Orientation to the Citizen (satisfaction, participation and rights)
Block II Integrated Health Care
2. Health Promotion, Prevention and Community Care
3. Attention to the individual and the family
4. Management by Integrated Healthcare Processes
Block III The Practitioner
5. Teamwork & Inter-professional Relationships
6. Attitude of Progress and Professional Development
7. Commitment to Teaching
8. Commitment to Research
Block IV Efficiency 9. Efficient use of resources
Block V Results 10. Results oriented professional development
Table 4. Structure of the professional competences accreditation manuals
Each competence is associated with a number of good practices, and each good practice
must be backed up by evidence and tests that the professional must provide to demonstrate
that they do indeed possess such competences.
5.2 Levels of accreditation
Accreditation means getting explicit and public recognition of compliance with the
requirements to provide quality care and the beginning of a line of continual improvement
by a professional. Thus, accreditation is not an end in itself, but a dynamic, continual and
evolving process, which provides professionals with the opportunity to establish
development options to grow in quality.
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
303
When a professional is competent in a particular area of their professional performance,
they present a series of observable and measurable behaviours, which verify the presence of
such competence: this set of behaviours constitute their good practices, which can be
observed and measured through evidence and tests (Brea-Rivero et al, 2001).
The evidence used to verify the existence of good practice has been classified by level of
complexity and can be of various types:
Essential evidence (which is essential for professional compliance)
Evidence Group I (indicating that the professional progresses towards maturity),
Evidence Group II (consolidating the professionals maturity)
Evidence Group III (which makes the professional a benchmark for other professionals
in the system).
The tests are instruments or objective elements of measurement or evaluation which
determine the fulfilment of the evidence associated with each good practice of a professional
competence.
The tests to be provided are primarily:
Non-attendance tests:
The self-audit is a review that the professional makes of sample health records of
patients seen over a certain period of time.
The reports consist of conducting a brief summary of a health history, in which the
professional shows what his performance was in certain situations. Also, the
reports can be "reflection" and / or clinical practice.
Certificates are documents accrediting the performance of a particular activity.
Attendance tests simulating a clinical situation. These tests are called by the Agency for
Healthcare Quality on determined dates, which the professional can attend or not, as
these tests are not mandatory).
Non-attendance tests subject to call (also called "contextualized cases"). They can consist
of using the Internet to make a critical reading of a scientific or medical journal based
on the evidence.
Evaluation methods are mainly focused on the highest level of Miller's pyramid (Miller,
1990).
With regard to how much evidence and tests a professional has to provide, it is important to
note that the evidence contained in the manual of competencies corresponds to your
professional group, depending on the level of accreditation intended to demonstrate or
achieve, the quantity and percentage of evidence required is different.
Based on these percentages of evidence obtained (essential, group I, II and III), the result
may be accredited in any of the following grades (Table 5):
Advanced grade
Expert grade.
Excellent grade.
The accreditation will have a term of five years. After this period, the accreditation ceases to
have effect, unless the process of reaccreditation began before expiry.
Quality Assurance and Management
304
ADVANCED EXPERT EXCELLENT
GROUP I 70% 70% 60%
GROUP II 70% 70%
GROUP III 80%
Table 5. Evidence required to achieve different levels of accreditation.
5.3 Accreditation process
The process of accreditation of competences is a voluntary process by which the professional
systematically reviews their own practice, demonstrating a level of competence, which they
already had, or have achieved during the accreditation process. Thus, the competence
accreditation programme attempts to ensure the presence and / or acquisition of new
competences and a determined level of their development throughout professional life.
Accreditation is a dynamic process that entails a periodic evaluation every five years to
verify the presence or acquisition of new skills and their level of development (certification
and recertification).
The accreditation process consists of three phases:
- Phase 1: The Application.
- Phase 2: The self-assessment.
- Phase 3: The recognition and certification.
Step 1. Request
The accreditation of professional competences begins with a formal request via the Web,
which contains the information needed to correctly identify the professional and their
accreditation choice.
Access to the professional competences accreditation programme, is made through the
website of the Andalusian Agency for Healthcare Quality, in the ME_jora P application,
which is designed to facilitate the process of professional accreditation.
http://www.juntadeandalucia.es/agenciadecalidadsanitaria/acsa_profesionales/
Once the application is accepted, the professional has access to all information relating to
their accreditation process, thereby enhancing the autonomy of the professional to manage
their accreditation path with transparency throughout the process.
From this moment, the Andalusian Agency for Healthcare Quality will supply credentials to
access the accreditation programme and the manual of competencies for your professional
group, assigning it a professional surveyor of the Agency (tutor guide) who will accompany
the whole process, either through personal meetings, telephone contact, or electronic
communication through the Web. Moreover, the ME_jora P application includes a video
with the information needed to provide accreditation.
PHASE 2: Self-assessment
This phase is the most important for the professional. It consists mainly in collecting and
provide evidence from their own practice, real and daily (depending on the contents of the
manual of competencies concerned), which demonstrate good practice in professional
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
305
performance, allowing a certain level of competence to be proven, which was previously
possessed, or that has been achieved during the accreditation process. Therefore a portfolio
type methodology is applied to assessing competence, which is the greatest benefit of
continuing professional development.
Since the self-assessment can last indefinitely, depending on the professional, the evidence
has a period of validity, outside of which it expires.
The Agency has developed a Web-based software application (ME_jora P), which allows the
professional to provide the necessary evidence to attain accreditation, as well as accessing
the content of the corresponding manual of competencies, examples and references to
consult in relation to good practice, it facilitate the development of self-assessment,
customizes the process and establishes permanent contact with the Agency to resolve
concerns.
PHASE 3: Recognition and certification
Once the professional has completed their self-evaluation, the Agency for Healthcare
Quality reviews the evidence provided, by expert professionals in each discipline or
specialty, and depending on them, issue a report of results and the corresponding
certification of the results of the evaluation, according to the criteria and standards
established at the level of development that the professional has reached: advanced, expert
or excellent.
In the report of results, the Agency for Quality provides the professional with vision on the
percentage of evidence provided, and the level of compliance of such evidence after the
assessment phase, identifying the level of professional development in each of the
competences contained in the specific manual.
In addition, the practitioner may request a review of the report of the results of process of
assessing the level of professional competence.
5.4 Support tools
To facilitate the professional accreditation process, the Agency offers several support tools:
- Manual of competencies: in digital or paper format, containing the competencies and
best practices that have been defined for each professional group or specialty. In
addition, the manual contains all the evidence and proof to be provided to advance the
accreditation.
- Tutor guide: when the professional requests starting their competences accreditation
process, they are assigned an Agency professional to accompany them throughout the
process. The tutor-guide will be in constant contact, either by personal meetings,
telephone contact, or electronic communication through the Web.
- ME_jora P: this Web-based software application has been designed to especially
facilitate the self-assessment phase. ME_jora P allows the professional to have an
updated version of their manual of competencies, it provide the necessary evidence
relating to their good practices, answer doubts with your tutor guide and check the
status of accreditation at any stage.
Quality Assurance and Management
306
6. Results
6.1 Results of the programme of accreditation centres and units
The number of accreditation projects has increased very significantly from 2003 to the
present, from the 14 self-assessments initiated in 2003, to the 790 in 2011. During this period,
285 healthcare units and centres have been accredited and there have been 410 primary
survey visits and 93 additional visits in those projects requiring a second visit for the
verification of certain aspects that were improved after the first. (Table 6)
In the years 2009, coinciding with the release of the first general document of accreditation
of services (rules governing the certification process), those files that were in the phase of
self-assessment for over a year began to be closed.
Our model includes 2 follow up visits at 2 and 4 years from the first survey visit, for which a
monitoring self-assessment is necessary in the 3 months preceding the visit itself. Up to the
first quarter of 2011, 323 monitoring self-assessments had begun.
2003 2004 2005 2006 2007 2008 2009 2010 2011
Applications received 14 51 60 47 81 50 196 172 119
Ongoing self-assessments 10 30 57 66 126 130 203 194 172
Initiated surveys 4 31 32 38 22 47 62 142 78
Visits made 4 34 42 55 36 57 97 146 78
Certifications granted - 12 28 32 27 20 51 68 75
Monitoring self-assessments started 1 13 28 46 23 32 57 86 61
Certifications due - - - - - 3 26 23 18
Suspended Certificates - - - - - - - 4 11
Certificates withdrawn - - - - - - - - 4
2011: 1st Quarter and 2nd Quarter
Table 6. Results of accreditation projects.
As can be seen in Table 7, the average times for self-assessment of the different clinical units
are variable. Note that the haemodialysis units took the most time to formalize the self-
assessment phase (15 months), and emergency centres took the least time to complete this
phase (6 months). The primary care clinics and hospital clinical units took very similar times
to complete the self-assessment phase: 11 and 12 months respectively.
Approximately 54 areas have been identified for improvement by process during the self-
assessment phase. The primary care units had more areas of improvement identified and
haemodialysis units the least. There is a difference between the areas for improvement
identified by the primary care units and those of hospitals, specifically 100 per project in the
first case and 78 in the second, despite the time spent on the self-assessment phase being
very similar.
Of the 30,497 areas identified for improvement by centres and units, 60% of them were
planned and implemented during the self-assessment. It can be seen that the primary care
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
307
units (66%) had the most implemented areas for improvement in relation to those identified,
and the emergency centres (2%) and clinical laboratories (40%) the least. In the identification
and implementation of these areas for improvement, during the self-assessment phase 4893
assessors participated (professionals of the clinical centres and units who reflected on the
standards compliance). Most assessors per project were found in the hospitals, followed by
the primary care units, and least in the haemodialysis units.
HOS E PU HA HM L DI TC Total
Indicators (process completed)
Av. Time for self-
assessment
(months)
12 6 11 12 15 8 10 8 10
Av. Areas for
Improvement
by process
98 30 100 78 10 26 65 25 54
Overall Results (all processes)
No. Centres
/Units
29 9 215 174 26 23 9 8 544
Improvement
areas
identified
2.521 30 16.349 9.883 265 836 480 133 30.497
Areas of
improvement
achieved
1.385
(55%)
2
(7%)
10.732
(66%)
5.450
(55%)
154
(58%)
335
(40%)
220
(46%)
87
(65%)
18.365
(60%)
Self Assessments 424 88 2.472 1.598 52 117 94 48 4.893
Number of
Queries
1.587 50 8.315 7.182 482 687 256 215 19.466
HOS (Hospitals). E (Emergency). PU (Primary Units). HA (Hospital area). HM (Haemodialysis).
L (Labs). DI (Diagnostic imaging). TC (Transfusion Centre)
Table 7. Description of accreditation projects by clinical sphere.
Table 8 presents the results obtained in the accreditation process in relation to the number of
areas for improvement identified in each of the blocks (dimensions of quality assessed). In
clinical units, both primary care and hospital, the largest number of areas for improvement
were identified in relation to the standards that address the evaluation of service being
provided to people within the health system (privacy, accessibility, continuity of care, ethics,
information, etc.), while in hospitals and clinical laboratories the greater number of areas for
improvement were identified in the support process block (equipment, emergency plans,
information systems, infection control, appropriate use of medication, etc.).
Figure 3 shows the classification of areas for improvement and the rate of implementation
during the self-assessment.
Quality Assurance and Management
308
Sphere The
citizen
Organization of
patient-centred
activity
Professionals Support
Processes
Results
Hospital 825 312 168 1,152 63
Emergency 11 2 8 9 23
Clinical Laboratory 267 107 61 342 59
Diagnostic Imaging 189 68 45 156 22
Blood Transfusion 37 16 11 66 3
Primary Care Units 6,400 3,304 1,358 4,646 641
Hospital units 4,164 1,855 803 2,715 346
Haemodialysis 122 53 27 52 11
Table 8. Areas for improvement identified in the various dimensions of quality discussed.
Fig. 3. Classification of areas for improvement.
6.2 Results of the programme of accreditation of professional competences
Following a pilot exercise in 2005, version 1 of the manuals of competencies were offered to
the professionals in 2006. In January 2008, and based on experience gained since the
beginning of the programme, version II was born, which included various improvements in
the wording of the evidence, in the software application that supports the accreditation
process and other actions aimed at facilitating the issuance of certificates for the workplaces
of the professionals. Similarly, the average amount of evidence decreased through the
manuals of competencies and, therefore, the evidence to be provided by professionals, fell
from 74 on average in version I to 67 in version II.
Currently there are 70 version II manuals of competencies available to many other
professional disciplines. (Figure 4).
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
309
Fig. 4. Accreditation manuals for professional competences.
Since the programme began, the number of professional accreditation processes has grown
steadily (Fig. 5). In June 2011, more than 16,000 accreditation processes had been initiated,
representing over 40% of medically qualified staff of the SSPA.
Of these, 3430 professionals had achieved some level of accreditation: 1,328 at advanced
level, 1430 at expert level and 672 at excellent level.
Fig. 5. Evolution of the accreditation processes.
The manual of competencies with the highest number of self-evaluation processes in
absolute values are:
Nursing care (hospitalization and special care).
Primary care nursing.
Quality Assurance and Management
310
Family Medicine primary care.
Nursing care hospital.
The procedures for these four maps together account for 42% of the ongoing processes.
As the demand for accreditation, hospital professionals account for 61% and professional
primary care 24%, the rest belong to professionals and emergency blood transfusion centres.
In the matter of gender, more applications for accreditation are received from women than
men in proportions of 56% - 44%, with considerable heterogeneity in response to the
competence map.
The competency profile through accredited professionals to date, and grouped by criteria, is
shown in Figure 6:
Fig. 6. Competency profile through accredited professionals.
Accredited professionals have invested an average time of 150 days on the self-assessment
of their practices with version II of the manuals.
Professionals who have closed their accreditation process, over 36% have decided to restart
the process in order to achieve a higher level of competence, so in fact they are already
providing evidence and testing.
As a support to the continual improvement of the accreditation programme, the
questionnaire of perceived satisfaction has been clearly defined. The validation of this
questionnaire was carried out by the Andalusian School of Public Health, ensuring its
content validity by using the following methodology:
Logical validity in terms of the population in the study, validity of the method of
application and the structure of the tool, translation and adaptation (semantic
equivalence, conceptual and cultural) of items and scales found in the literature (which
may improve the content of the tool ) and format of the tool's presentation.
Revision (trial judges) was performed by experts in survey research methodology,
research methodology in health services, quality and accreditation of centres,
professional development organization and management of health services, to issue an
assessment and critical assessment of the measuring tool.
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
311
The questionnaire and instructions were sent to 100% of the population under evaluation
after each call. This was done via a message on the personal accreditation page, eliminating
selection bias. The online nature of the accreditation process familiarises the professional
with the use of technology, limiting the effect of the technological barrier for non-response.
Responses were received, at the same preserving anonymity, and distinguishing between
professionals who had used the accreditation process using different versions of the
manuals.
The questionnaire includes several dimensions that are valued by different questions and
statements using a Likert scale with response elements at levels of 0 to 10.
In this study, the assessment of the following elements were analyzed:
Overall satisfaction with the accreditation process.
Usefulness of the accreditation process in the "self-study" and "reflection of the
practice."
Usefulness of the accreditation process in the "maintenance and improvement of
competences."
Usefulness of the accreditation process in "maintaining and improving results."
Of the professionals who have completed this, the response rate has been 62.08%. It verified
that the scales of the questionnaire items were adequate, had good discriminatory power
and showed no such bias as "floor and ceiling", ie, they present acceptable proportions of
upper and lower ends of its distribution.
The overall assessment obtained by the accreditation programme is 8.01 out of 10. On the
other hand, analyzing the perceived usefulness in continuing professional development, we
identified the following results:
Usefulness of the "self-study and reflection on practice": 8.1 out of 10
Usefulness on "maintaining and improving their competences": 8 out of 10
Usefulness on "maintaining and improving their results": 8 out of 10
7. Conclusions
1. Healthcare organizations are making a major effort to promote quality in the care they
provide, but a disturbing question has arisen, especially within the environment of the
economic crisis we live in, Are you using the right tools to increase quality ? There are posts
warning against complacency with current methodologies that are proven ineffective and
urging areas of self-assessment and reflection to be sought by professionals, followed by
external validation.
2. The ACSA accreditation model offers healthcare organizations and professionals self-
assessment and reflection, along with external validation by qualified professionals. One of
the conceptual pillars of this model is considered to be the ultimate aim in continual quality
improvement.
3. The Andalusian Agency for Healthcare Quality has established and implemented its own
unique accreditation model to improve and ensure quality in the healthcare provided to
citizens within the Andalusian Public Health System. To do that, the Agency, has designed a
Quality Assurance and Management
312
series of accreditation programmes as tools for the continual improvement and safety at the
service of the professionals, units and organizations, and has established a methodology
that facilitates their application in practice and maximizes results.
4. Accreditation programmes share the same structure and contemplate, from each of their
perspectives, the same key areas of quality management: The citizen, Integrated health care,
Professionals, Areas of support and Efficiency & results.
5. For the Andalusian Agency for Healthcare Quality, Accreditation means an explicit and
public recognition that the requirements needed to develop quality care have been fulfilled,
and that a line of continual improvement has been undertaken. As a tool, and not an end in
itself, accreditation promotes and encourages processes of improvement and evaluation
within the health system.
6. Each of the phases, and especially self-assessment, are based on a series of Web-based
applications called ME_jora developed by the Andalusian Agency for Healthcare Quality,
which allows each accreditation process to be conducted securely and with the support of
Agency professionals, and also enables the dissemination and exchange of knowledge and
the elements of quality identified in them.
7. The return obtained through the questionnaire of perceived quality is encouraging; our
results are consistent with experiences using self-assessment in other areas.
8. Acknowledgment
We would like to acknowledge the research's support team of the Andalusian Agency for
Health Care Quality. This includes our research's technicians, Manuel Herrera-Usagre and
ngela Aguilar-de-Leyva, PhD, as well as the contributions Habibullah Rodrguez
Contreras, graphic designer.
9. References
Almazn Gonzlez, S. (2006). Modelo de acreditacin andaluz. Agencia andaluza de calidad
sanitaria. Revista de Administracin Sanitaria. Vol.4, no.2, pp.189-194
Almuedo-Paz, A. (2006). Programa de acreditacin de competencias profesionales en el
Sistema Sanitario Pblico Andaluz. Cir Andal, vol.17, pp.160-162
Almuedo-Paz, A., Brea-Rivero, P., Buiza-Camacho, B., Rojas-De-Mora Figueroa, A.,
Torres-Olivera, A. (2011). Skills Accreditation as an impetus for continuous
professional development. Revista de Calidad Asistencial, Vol.26, no.4,
(forthcoming)
Aranaz, J.M., Leutscher, E., Gea, M.T. & Vitaller, J. (2003). El aseguramiento y la acreditacin
sanitaria. Qu opinan sobre la acreditacin los directivos sanitarios espaoles.
Revista de Calidad Asistencial, Vol.18, no.2, pp.107-114
Arcelay, A., Lorenzo, S., Bacigalupe, M., Mira, J.J., Rodrguez-Marn, J., Sitges, E. (1998).
La aplicacin del modelo europeo de gestin de la calidad total al
sector sanitario: ventajas y limitaciones. Revista de Calidad Asistencial, Vol.13,
pp.92-97
The ACSA Accreditation Model: Self-Assessment as a Quality Improvement Tool
313
Arnau-Figueras, J., Martnez-Carretero, J.M. (2007). Comparativa de instrumentos de evaluacin
de la competencia. Evaluacin de la competencia clnica: Anlisis comparativo de dos
instrumentos (ECOE versus Portafolio). Plan de Calidad para el Sistema Nacional de
Salud. Ministerio de Sanidad y Consumo. Agncia dAvaluaci de Tecnologia i
Recerca Mdiques de Catalua, Informes de Evaluacin de Tecnologas Sanitarias,
n. 2006/14, Barcelona
Brea-Rivero, P., Almuedo-Paz, A., Rojas-de-Mora Figueroa A., Torres-Olivera, A. (2011).
Buenas prcticas que promueven la seguridad. Revista ROL Enfermera, vol.345,
no.7-8, pp.525-530
Brun, A., Garca-Asa, J.C. (2004). Sistema de calidad del Servicio Aragons de Salud. Revista
de Calidad Asistencial, Vol.19, no.3 pp.131-120
Casey, D.C., Egan, D. (2010) The use of professional portfolios and profiles for career
enhancement. British Journal of Community Nursing, vol.15, no.11, pp.547-552
Caverzagie, K.J., Shea, J.A., Kogan, J.R. (2008). Resident identification of learning objectives
after performing self-assessment based upon the ACGME core competencies.
Journal of General Internal Medicine, vol.23, no.7, pp.1024-1027
Clavera, A. (2004). El papel de la Agencia de Calidad en el Sistema Nacional de Salud. De la
teora a la prctica. Revista de Calidad Asistencial, vol.19, no.3 pp.205-210
Comit editorial. (2004). Una cartografa de la gestin de calidad en Espaa. Revista de
Calidad Asistencial vol.19, pp.103
Cowan, D.T., Wilson-Barnett, J., Norman, I.J. (2007). A European survey of general nurses'
self assessment of competence. Nurse Education Today, vol.27, no.5, pp.452-458
Del Ro, M.P. Feliu, J., Roch, I., Snchez, A., Ordez, A., Garca-Caballero, J., Gonzlez-
Barn, M. (2006). Aplicacin Del Modelo Europeo De Calidad En Oncologa. Revista
Clnica Espaola, vol.206, no.3, pp.129-136
Fortes, M.T., Mattos, R.A., Baptista, T.W. (2011). Accreditation or accreditations? A
comparative study about accreditation in France, United Kingdom and Catalua.
Revista da Associao Mdica Brasileira, vol.57, no.2, pp.239-246
Giraud, A. (2001). Accreditation and the quality movement in France. Quality in Health Care,
vol.10, pp.111-116
Greenfield, D. & Braithwaite, J. (2008). Health sector accreditation research: a systematic
review. International journal for Quality in Health Care, vol.20, no.3, pp.172-183
Guix Oliver, J. (2005). Calidad en salud pblica. Gaceta Sanitaria. vol.19, no.4, pp.325-332
Gut, R., Knudsen, J.L., Freil, M., Jensen, A.J. (2006). Clinical leaders' and staff's assessment of
the current quality related to the patient pathways and expectations of and
knowledge about accreditation abaseline evaluation in Copenhagen County.
UGeskr Laeger, vol.168, no.46, pp.3993-3997
Laing, A., Hohh, G., Winkelman, D. (2004). Healthcare and the information revolution:
reconfiguring the health-care service encounter. Health Services Management
Research, vol.17, pp.188-199
Lombarts, M.J.M.H., Rupp, I., Vallejo, P., Suol, R., Klazinga, N.S. (2009). Application of
quality improvement strategies in 389 European hospitals: results of the MARQuIS
project. Quality & safety in health care, vol.18, pp.28-37
Lorenzo, S. (2004). La Gestin de la Calidad: de los modelos a la excelencia. Revista de Gestin
Clnica y Sanitaria, vol.6, no.4, pp.131-132
Quality Assurance and Management
314
Martnez-Pillado, M., Mndez, D., Trabado, J.L. Martn Casaas, F., Ramos, S., Coello, C.,
Afonso-Rodrguez, J.J. (2008). Mtodo de implantacin de una accin de mejora en
el Servicio de Ginecologa del Hospital Universitario Nuestra Sra. de Candelaria.
Revista de Administracin Sanitaria Siglo XXI, vol.6, no.4, pp.691-698
McCurdy, B.M., Duggan, L., Howlett, S., Clark, B.G. (2009). A comparison of medical
physics training and education programs--Canada and Australia. Australasian
Physical and Engineering Sciences. Vol.32, no.4, pp.251-260
Miller, G.E. (1990). The assessment of clinical skills/competence/performance. Academic
Medicine, vol.65, no. suppl. 9, pp.563-567
O'Neale, M., Kurtz, S. (2001). Certification: perspectives on competency assurance. Seminars
in perioperative nursing, vol.10, no.2, pp.88-92
Pardell, H. (2005). La acreditacin de la formacin mdica continuada y la mejora de la
calidad. Situacin actual en Espaa y en el mbito internacional. Revista de Calidad
Asistencial, vol.20, no.3, pp.171-177
Pariente, E., Ramos, C., Dierssen, T., Esteban, J., Amaya, A., Rodrguez de Lope, C., Soler, G.
(2004). Gestin de la calidad en el Servicio Cntabro de Salud. Revista de Calidad
Asistencial, vol.19, no.3, pp.121-127
Pasquina, P.F., Kelly, S., Hawkins, R.E. (2003). Assessing clinical competence in physical
medicine & rehabilitation residency programs. American Journal of Physical Medicine
& Rehabilitation, vol.82, no.6, pp.473-478
Prez, E., Oteo, L.A. (2006). Funcin directiva y recursos humanos en Sanidad. Ediciones Daz de
Santos. Madrid, Spain.
Pomey, M.P., Lemieux-Charles, L., Champagne, F., Angus, D., Shabah, A.,
Contandriopoulos, A.P. (2010). Does accreditation stimulate change? A study of the
impact of the accreditation process on Canadian healthcare organizations.
Implementation Science, vol.5, p.31
Pomey, M.P., Franois, P., Contandriopoulos, A.P., Tosh, A., Bertrand, D. (2005). Paradoxes
of French accreditation. Quality & safety in health care, vol.14, no.1, pp.51-55
Prados, J.A. (2005). Preguntas sobre la evaluacin de las competencias y alguna respuesta:
portfolio. Atencin Primaria, vol.36, no.3, pp.3-4
Staccini, P., Rouger, P. (2008). Modeling and using a web-based and tutored portfolio to
support certification of professional competence in transfusion medicine. AMIA
Annual Symposium Proceedings, pp.697-701
Tochel, C., Haig, A., Hesketh, A., Cadzow, A., Beggs, K., Colthart, I., Peacock, H. (2009). The
effectiveness of portfolios for post-graduate assessment and education: BEME
Guide No 12. Medical Teacher, vol.31, no.4, pp.299-318
Torres Olivera, A., Fernndez, E., Paneque, P., Carretero, R., & Garijo A. (2004). La Gestin
de la calidad asistencial en Andaluca. Revista de Calidad Asistencial, vol.19, no.3, pp.
105-112
Ugalde, M. (2003). Excelencia en la Gestin. Existen resultados o es solo un acto de fe?
Revista de Calidad Asistencial, vol.18, no.6. pp.338-41
Viswanathan, H.N., Aslmon, J.V. (2006). Accrediting Organizations and Quality
Improvement. American Journal of Managed Care, vol.6, no.10, pp.1117-1130
17
Quality Improvement Through Visualization
of Software and Systems
Peter Liggesmeyer, Henning Barthel, Achim Ebert, Jens Heidrich,
Patric Keller, Yi Yang and Axel Wickenkamp
Fraunhofer IESE / University of Kaiserslautern
Germany
1. Introduction
Many organizations still lack support for obtaining control over their system development
processes and for determining the performance of their processes and the quality of the
produced products. Systematic support for detecting and reacting to critical process and
product states in order to achieve planned goals is often missing. As systems and software
become bigger and more complex, classic approaches reach their limits, due to the difficulty
of extracting relevant information from a large volume of measures. Here, suitable
visualization and virtual reality solutions can offer a clear advantage by representing the
relevant information in a more easily recognizable form. However, many resulting
visualizations are still hard to understand, even for experts. This opens the door for
researching modern, human-centered approaches that provide the user with visualization
and interaction models for visually analyzing and understanding the underlying complex
data. This chapter focuses on two main topics: system visualization and software
visualization.
Software visualization continues a very successful direction of software engineering, namely
the topic of software measuring/software analysis. Software visualization in general does
more than visualizing the product software itself. Visualization mechanisms are also
typically applied to software development processes and to support the tracking of project
progress (e.g., as a central component in project dashboards).
System visualization aims at a better understanding of system properties, e.g., safety. These
properties are usually influenced by mechanical components, microelectronics, and
software.
2. Software Visualization
The term Software Visualization refers to a broad range of visualization mechanisms that
can be applied to many different issues relating to engineering-style software development.
For instance, it may be used to visualize and analyze software development processes,
different artifacts created as part of the development process (such as designs or code), or
even aspects of the project itself (like the communication of the team or the information flow
between development locations). This section focuses on providing an overview of the
Quality Assurance and Management
316
variety of different visualization techniques that may be used. First, the visualization of
product and process/project characteristics will be discussed. After that, some mechanisms
for dealing with complexity and nesting issues in general will be highlighted.
2.1 Related work
Depending on the focus of a software development organization (e.g., safety-critical
software or commercial off-the-shelf software), different characteristics of software products
such as security, reliability, or maintainability may be important. ISO/IEC 25000 (see (ISO,
2011)) gives an extensive overview of different product characteristics and some
recommendations on how to quantify and measure different attributes of the software.
There are lots of measurement tools on the market for analyzing static and dynamic aspects
of a software product. Examples are Metrics Eclipse Plugin (Metrics, 2011), CodePro Studio
(Instantiations, 2011), JDepend (JDepend, 2011), or McCabe IQ (McCabe, 2011). Each of these
tools has different capabilities in terms of the metrics supported and the visualization
capabilities offered. A detailed description of such tools can be found in (Rech, 2005).
Typically standard visualization mechanisms are used for project control, such as simple
line, bar, and pie charts, spider plots, tables and matrices, simple graphs (networks), Gantt
charts, or box plots. The type of visualization used depends on the level of abstraction and
the viewpoint for which the data is visualized. Different kinds of exploration capabilities are
provided for project control, such as drill-down mechanisms aimed at getting a more
detailed view on the data, or aggregation mechanisms aimed at getting an overview
containing multiple, abstract pieces of information. Moreover, visualization techniques may
provide basic interaction mechanisms for browsing the data, such as scrolling data along a
time axis in order to browse the history and development of indicators over time. More
advanced visualizations such as visualization metaphors are seldom used within project
control frameworks. However, they can be found in special-purpose tools, e.g., visualizing
software systems using 3D models of landscapes and urban structures (Balzer, 2004).
In software visualization, graph drawing techniques are used to describe and comprehend
the complex structures of software systems, development processes, and software quality
characteristics. The most popular graph drawing techniques used are node-link diagrams.
The standard algorithm was proposed by Sugiyama (Sugiyama, 1981). Due to the inherent
complexity of solving the sub-problems using this algorithm, many heuristics have been
proposed, e.g., by Gansner et al. (Gansner, 1993) and Eiglsperger et al. (Eiglsperger, 2005). A
detailed description of graph visualization techniques using node-link diagrams can be
found in (Herman, 2000), (Battista, 1999), and (Kaufmann, 2001). Since the space
requirements of node-link diagrams grows rapidly with the size of a graph, space-filling
techniques like Treemaps (Johnson, 1991), Sunbursts (Stasko, 2000), or Icicle Plots (Kruskal,
1983) have been applied to realize a space-constrained visualization of large hierarchical
data sets. However, in contrast to node-link diagrams, it might be more difficult to
understand hierarchical relations using these space-filling techniques. Node-link diagrams
might be combined with space-filling techniques to visualize both hierarchical and non-
hierarchical relations within one view. Fekete (Fekete, 2003) uses a Treemap to visualize the
hierarchy, while Bzier curves are used to show additional non-hierarchical relations
connecting two Treemap regions. See (Fekete, 03) for more details on combining node-link
diagrams with space-filling visualization techniques.
Quality Improvement Through Visualization of Software and Systems
317
2.2 Software product characteristics
Fine-grained measurement of software product characteristics tends to result in a huge
amount of measurement data. With simple high-level charting and diagram visualizations
(Fig. 1), only condensed views on the measurement data can be provided.
Fig. 1. High-level charting and diagram visualization techniques.
In order to provide a goal-oriented visual exploration and analysis of product characteristics,
the structural information about the system needs to be utilized, preserving the users mental
map of the system architecture. Hence graph-based techniques and especially UML diagrams
are often used as a base visualization technique, with relevant attributes of the software system
being analyzed mapped onto the structural visualization using a set of additional graphical
elements such as text, geometric shapes, and icons (Fig. 2). If product characteristics are to be
analyzed on the source code level, image-based techniques combined with traditional
brushing and shading mechanisms may be used. By utilizing appropriate scaling and
interaction techniques, this approach allows the visualization of several levels of details of the
source code within one picture: Some areas may show the original source code, while others
may visualize several lines of code as a shaded region using color coding and shading to map
measurement data onto the visual item (Fig. 3).
To get a deeper insight into the quality of a software product, it is not sufficient to use these
visualization techniques with just simple interaction techniques only. Rather, the
specification and selection of visualization techniques has to be tightly integrated with the
specification and selection of metrics used to collect the measurement data. With such tight
integration, the user may apply tailored metrics and visualization metaphors on different
level of details when visually exploring the product characteristics.
At Fraunhofer IESE we have realized this approach with our scalable measurement tool M-
System. We store an abstract syntax tree (AST) representation of the source code in a
relational database. This database is then used to define metrics and collect measurement
data by issuing appropriate SQL statements. The same SQL frontend is further used to filter
the measurement data and to select and tailor the visualization technique for use on
different levels of detail. Fig. 4 and Fig. 5 show example visualizations generated with the
M-System, used to analyze the product characteristics of a software system on different
levels of detail. The user starts with a 3D-Treemap overview visualization showing a
condensed view of the product characteristics. The 3D-Treemap technique maps both the
basic code structure as well as the quality data (e.g., component size and complexity
measures) to cubes using different graphical properties (position, size, height, and color).
Quality Assurance and Management
318
Fig. 2. Graph-based techniques (Termeer, 2005) using UML diagrams.
Fig. 3. Image-based techniques (Ball, 1996) and brushing (Lommerse, 2005) on the source
code level.
Critical components (e.g., a red cube in the 3D-Treemap) might then be further analyzed by
selecting such components within the visualization and adapting the measurement data and
Quality Improvement Through Visualization of Software and Systems
319
the visualization technique to be used in the subsequent analysis process. For example, in
Fig. 5, we use a node-link graph visualization to highlight critical components. We take the
same measures, but simply adjust the visualization to color code the data according to a
given threshold value. This simplifies the identification of critical parts of the component
being analyzed.
Using the SQL frontend to define metrics and collect measurement as well as to filter the
measurement data and to select and tailor the visualization technique has proven to be a
very flexible and powerful approach. Nevertheless, making this frontend more user-friendly
as well as integrating further visualization techniques into the M-System is ongoing work at
Fraunhofer IESE.
Fig. 4. 3D-Treemap visualization of software quality on different levels of detail using
Fraunhofer IESEs M-System.
Fig. 5. Node-link graph visualization for highlighting critical components.
Quality Assurance and Management
320
2.3 Software process and project characteristics
Visualization techniques may also be used for analyzing complex software development
processes. For instance, the German V-ModellXT has more than 1000 entities with different
relationships among them. Analyzing the commonalities between the different versions of
such a process and identifying inconsistencies and bottlenecks is a non-trivial task that
requires advanced visualization techniques. Fig. 6 presents two analysis views for getting an
overview of the evolution of the V-ModellXT based on the DeltaP approach developed at
Fraunhofer IESE (Soto, 2008). The left-hand side demonstrates the increase of entities
(activities, artifacts, roles, etc.) over different versions of the V-ModellXT. The vertical lines
indicate official releases of an internal version. From version 1 to version 600, more than 200
entities were added. The right-hand side shows the number of changes in different modules
of the V-ModellXT over time. The size of the circle reflects the number of changes
(additions, deletions, modifications) of a certain module. In order to obtain a simple
footprint of the evolution, the changes over time are mapped to a bar code. What can be
observed from the chart is, e.g., that the major work before release 1.0 was completed at the
end of 2005, but it took more than one month with close to zero changes before the actual
release took place. A second observation is, e.g., that a huge number of changes were
postponed after release 1.1. As soon as the main development branch was released, some
major changes were implemented into release 1.2.
Fig. 6. Visual analysis of the V-ModellXT evolution (Soto, 2008).
Another very common area for software visualization is project monitoring and control.
Many different aspects of a development project have to be visualized on different levels of
abstraction, depending on the goals and characteristics of the project. This typically includes
the schedule of the project as well as effort/cost aspects, but also quality-related measures,
such as the defect density, the requirements already implemented, or the test coverage. One
challenge for the visualization of this data is how to show trends for identifying potentially
critical project states in time and how to initiate corresponding countermeasures. Another
challenge is how to provide visualization mechanisms for condensing and aggregating the
data (e.g., making use of corresponding quality models). Fig. 7 presents a Software Project
Control Center (SPCC) prototype created at Fraunhofer IESE. The Specula approach is able
Quality Improvement Through Visualization of Software and Systems
321
to dynamically create an SPCC interface from project control building blocks for data
collection, data processing, and data visualization. The screenshot on the right shows on
overview of available control charts and displays the selected Gantt charts for monitoring
the projects schedule and progress. The screenshot on the left side aggregates all data into a
simple matrix structure for analyzing the trend with respect to core project measurement
objects and properties.
Fig. 7. Visualizing software project control data (Heidrich, 2010).
2.4 Complexity and nesting
A very general underlying problem of software visualization is how to deal with highly
complex structures and nesting. Typically, graph representations are used for describing
these structures, and graph visualization techniques are applied to improve the
comprehension of software products, projects, and processes or to facilitate decision support
for software architects and project managers.
However, using off-the-shelf graph visualization tools may be inadequate in the software
engineering domain because they often do not reflect the users context and role-specific
visualization and interaction requirements in such distinct application scenarios as
Quality Measurement, Architectural Analysis, Reengineering, Process Management,
Process/Product Evolution, Risk Management, or Security and Safety. Rather, specially
engineered tool support is required, providing domain-centered visualization and
interaction techniques that support the interactive visual exploration of highly complex data
structures within each application scenario.
At Fraunhofer IESE we align our tool support according to this strategy (see sections 2.2,
2.3, 3.1 and 3.2 targeted at relevant application scenarios). Based on the users need, we
combine traditional visualization techniques with suitable interaction and navigation
techniques on different levels of detail. The user might start with a 2D or 3D visualization
providing an overview of the whole data set, which acts as the starting point for the visual
exploration (see Fig. 8). However, the user can also use traditional node-link diagrams or
Quality Assurance and Management
322
a combination of node-link diagrams and space-filling techniques if he is used to that (see
Fig. 9).
The user might then decide to further investigate parts of the dataset using more
appropriate visualization and interaction techniques. For example, if the user performs an
architectural analysis and needs to know more details about the relations between
components of a subsystem, he might select the subsystem in the overview visualization
and switch to a more suitable visualization like that in Fig. 10.
Practical examples from industry indicate that it is reasonable to realize domain-specific,
user-centered visual exploration tools in the software engineering domain that are
tailored to the users context and role-specific visualization and interaction requirements.
Realizing this tool support is ongoing work and an interesting research topic at
Fraunhofer IESE.
Fig. 8. Exemplary overview visualizations that might be used as a starting point for visual
exploration.
Quality Improvement Through Visualization of Software and Systems
323
Fig. 9. Traditional node-link diagram visualization (top) and a combination with space-
filling techniques (bottom) using sunbursts to visualize hierarchy nodes and Bezier-Curves
to visualize links.
Fig. 10. Combined space-filling and node-link visualization. Edge bundling (Holten, 2006) is
used to visualize non-hierarchical relations, based on the multivariate information taken
from the original dataset.
Quality Assurance and Management
324
3. System visualization
The importance of system visualization increases due to growing size, critical properties
(e.g., safety, security), and new application domains (e.g., ubiquitous systems / ambient
systems), which are characterized by complex behavior (e.g., dynamic aspects). Many
safety-critical embedded systems need to be certified by certification authorities before
being released for public use. This requires techniques that are capable of displaying
detailed information about the safety properties of large systems and that can, at the same
time, prevent critical information overload.
3.1 Safety visualization
Safety is a quality characteristic that is very important in many application domains, e.g.,
rail systems, avionics, or medical systems. According to the IEC 61508 standard, safety is the
absence of unacceptable risks.
3.1.1 Safety analysis
The analysis of safety-critical systems is organized to follow certain rules. The
corresponding techniques and methods tend to analyze the causes leading to critical system
conditions that violate the specified safety objectives. One technique frequently used in this
context is the so-called Fault Tree Analysis (FTA). It describes the relationship between low-
level failures, e.g., failures on the component level, and system failures. Fault Trees (FT) use
logical gates to model these cause-effect relationships. Low-level failures (Basic Events
(BEs)) are represented as leaves of the FT, whereas the root represents a safety-critical
system failure (Top Event (TE)). Besides being a qualitative analysis, FTA allows
quantifying the probability of occurrence of the TE if the probabilities of the corresponding
BEs are known.
A Minimal Cut Set (MCS) is defined as a minimal set of BEs whose simultaneous
occurrences cause the TE. Traditional approaches for analyzing MCSs primarily use text-
based ((ESSaREL, 2011), (RELIA, 2011), (Fig. 11 (a)) or table-based ((RelexArchitect, 2011),
(SYNC, 2011), (Fig. 11 (b)) representations. The information listed there usually includes an
ID for identifying the individual MCSs and the BEs contained together with their
corresponding failure probabilities. In many cases, table-based representations rely on
regular interaction techniques such as filtering and sorting. However, the possibilities of
these manipulation techniques are limited. They neither provide appropriate graphical
assistance facilitating better understanding nor do they support the analysis of correlations
between BE and MCS within large data sets. This hampers efficient handling and
consequently might lead to situations in which information intended to contribute to safety
improvements may become lost. To reflect the way the effects of the current MCS propagate
along the FT (Fig. 11 (c)), some approaches ((ESSaREL, 2011), (ISOGRAPH, 2011)) represent
MCS via highlighted paths between BEs and the TE.
The idea of modeling cause-effect relationships was extended to so-called Component Fault
Trees (CFT). CFTs permit encapsulating sub-trees that correspond to technical components
and thus provide the possibility to deal with different levels of abstraction.
Quality Improvement Through Visualization of Software and Systems
325
Fig. 11.Common methods for representing MCSs: (a) Plain text (ESSaREL, 2011). (b) Table
format (ALD, 2011). (c) Associated paths highlighting (RelexArchitect, 2011). (d) Component
Fault Tree (ESSaREL, 2011).
The tool ESSaREL (ESSaREL, 2011) supports the use of CFTs (Fig. 11 (d)). Additional MCS
information in the form of plain text is provided in separate views (Fig. 11 (a)).
3.1.2 ViSSaAn
A new visualization tool called ViSSaAn (Visual Support for Safety Analysis) developed at
the University of Kaiserslautern (Yang, 2011) uses a matrix-based visualization to efficiently
represent the information associated with MCSs of FTs and CFTs, respectively.
The matrix assigns the MCSs to the rows, whereas the failure probabilities of the individual
MCSs, the MCS IDs, the orders of the MCSs (Fig. 12, area 1), and the BEs (Fig. 12, area 2) are
assigned to the columns. The tool classifies the MCSs into three different safety categories
according to their failure probabilities: high, moderate, and acceptable; the thresholds for
this classification can be set according to the specific needs of the analysis process. The color
scheme applied for visualizing these relations uses red to indicate high, yellow to indicate
moderate, and green for acceptable probabilities. In this way the user is able to perceive the
criticalities of the individual MCSs very intuitively. The three-level categorization concept is
also applied in the same way for characterizing and visually highlighting the BEs.
Quality Assurance and Management
326
Fig. 12. Overview of ViSSaAn: matrix view (center), navigation tree (left), and information
panel (bottom). In matrix view, area 1: properties of MCSs; area 2: containing relationships
between MCSs (rows) and BEs (columns); area 3: properties of BEs and indicators of groups
for BEs.
Furthermore, ViSSaAn uses translucent bar charts to represent the orders of the MCS. The
order in this regard is defined by the number of BEs contained in an MCS. In general, this
means: the smaller the order, the more critical the MCS.
Whenever a BE belongs to an MCS, the matrix indicates this dependency by coloring the cell
at the location where the BE column intersects with the MCS row (see Fig. 12, area 2). The
Quality Improvement Through Visualization of Software and Systems
327
cell color used at the intersection depends on the BEs safety category. In addition, ViSSaAn
displays the exact occurrences and failure probabilities of the BEs at the bottom of matrix to
support an extended quantitative analysis (Fig. 12, area 3).
In order to quickly identify essential dependencies within a large number of MCSs, ViSSaAn
provides a range of sorting and grouping functionalities. The sorting function, for instance,
allows sorting the MCSs according to their failure probabilities in descending and ascending
order. The resulting groups of MCSs having high, moderate, and acceptable probabilities
separating the matrix vertically into three distinct segments with different colors (Fig. 12,
area 1 shows the three MCS groupings in red, yellow, and green). The sorting function
automatically groups the MCSs according to their criticalities, so that the user can efficiently
delimit the number of MCSs to be examined. The sorting function is also available for the
columns in order to intuitively identify and delimit important BEs. The grouping in case of
BEs is illustrated by the last row of the matrix view in Fig. 12 (area 3).
To satisfy the need for providing a suitable overview when addressing large-scale MCS data
sets, ViSSaAn additionally provides flexible scaling interaction functionalities like uniform
scaling and scaling by groups. Uniform scaling allows narrowing the row heights in order to
depict as many MCSs as possible to exploit the limited display space. However, one
problem immanent to this scaling approach concerns the reduction of the space used to
depict other MCS-related information. To address this issue, ViSSaAn uses a scaling
approach following the degree-of-interest (DOI) concept referred to as scaling by groups. It
preserves important MCS information, while simultaneously maintaining a suitable
overview (Fig.12, area 1). The heights of the rows are adapted to the safety criticality of its
corresponding MCS: the more critical the MCSs, the larger the row heights. This way, the
users can focus on the important information while maintaining the overview as their
context. Both scaling approaches can be applied to rows as well as to columns in order to
reduce information overhead by simultaneously maintaining all details necessary for an
efficient analysis.
3.1.2.1 Embedded CFT structures
The FT logical structure supports better understanding of the influences of MCSs in a
system. ViSSaAn integrates the structures of CFT components into the matrix view using
focus+context techniques in combination with semantic zooming concepts. Whenever a
color-filled cell is double-clicked, ViSSaAn enlarges the corresponding cell area and displays
an embedded view (see Fig.13) showing the internal logical structure of the component
associated with the BE. The leaf nodes are again colored according to their safety criticality
levels. The color-filled nodes represent the BE corresponding to the selected column,
whereas the nodes having a thick border represent all other BEs contained by the MCSs of
the current row. Those leaf nodes or BEs not directly related to the MCS are marked with a
thin border. Integrating such embedded logical structures allows ViSSaAn to provide
additional information about how the BEs of an MCS influence the component of a CFT
along the internal structure. This allows the users to focus on the detailed internal structures
while maintaining the overall context. ViSSaAn also provides interactions for the internal
structure inside the embedded view, such as smooth zooming and panning, which allow
adapting the view to the current visualization needs. A more detailed description of the
ViSSaAn tool and its possibilities is provided in (Yang, 2011).
Quality Assurance and Management
328
Fig. 13. Logical structure of the CFT component embedded in the matrix view. The color-
filled node represents the BE in the current column. The nodes with a thick border are
contained by the MCS in the current row. BEs not related to the current MCS are depicted
with a thin border.
3.2 Virtual Reality
Virtual Reality (VR) is considered a technology for providing virtual mappings of real-
world objects, which are allowed to be explored and manipulated by users. It combines 3D
visualization techniques with human-centered interaction techniques. Depending on the
display technology, VR is classified into four main categories: immersive (e.g., head-
mounted displays), semi-immersive (e.g., car driving simulator), projected (e.g., CAVE
Cave Automated Virtual Environment, 3D Walls etc.), and desktop (e.g., monitor), each with
its own advantages and disadvantages.
3.2.1 Current approaches In VR
Regarding the usage of VR technology, several fields in science and engineering have
greatly benefitted from its application. This includes, among other things, that VR
contributes to a better understanding of real-world systems and processes. VR can
emphasize which information is important for the user and simultaneously allows blanking
out other kinds of information. It also supports the exploration of complex structures,
processes, and relations (Kreylos, 2003).
In addition, VR facilitates the process of developing large systems and environmental
structures by providing means for efficient design and analysis. In this context, VR is being
adopted in domains like automotive (e.g., the design of cars), aeronautics (e.g., in the
development of airplanes and satellites), as well as in the construction industry to provide a
first glance at final products, e.g., in the form of virtual prototypes. Following up on this
Quality Improvement Through Visualization of Software and Systems
329
idea makes it possible, e.g., to perform a proof of concept even without any real system at
hand. When we consider economical aspects, the application of VR techniques provides
great benefits in terms of cost reduction and time savings during development. Particularly,
in scenarios where the existence of expensive functional models is required, it may no
longer be necessary to come up with a fully functional real-world system. The article by
Purschke et al. (Purschke, 1998) gives an example of how VR techniques have recently been
used with respect to developing vehicle systems at Volkswagen.
Another application area uses VR for the purpose of training and operator qualification.
Virtual training systems are built with the intention to reduce expenses for education and
training and to provide a safe way of preparing critical operations and procedures that
otherwise would most likely endanger persons or equipment. This is possible since VR
systems are, by their very nature, safe, controllable, and economical. VR applications were
developed e.g., for education (Oliveria, 2007), preparation of medical surgeries (Heng, 2004),
and others.
In addition, VR is preferably used in cases where safety-critical systems have to be tested
with regard to dangerous situations. This may become necessary within the context of
common certification procedures concerning a range of critical system properties. Not all
situations can be covered by real-world testing be it due to time or money restrictions or
simply because of safety reasons. In (Barret, 2010), the authors introduce a virtual system
allowing the design and exploration of safety-critical scenarios in the context of electrical
engineering.
3.2.2 VR and safety
In the last few decades, the number of electronic and electronically programmable devices
deployed within embedded systems has risen dramatically. This not only had effects on the
size and complexity of those systems but also on their quality. Especially safety is a quality
characteristic strongly influenced by this evolution.
One possible step towards safer systems is to take advantage of extended means provided
by Virtual Reality (VR) technologies. VR is increasingly becoming a powerful tool for
tackling the challenges found in quality assurance of embedded systems. It allows
incorporating knowledge/information from different sources, ranging from physical
domains like object shapes and materials to more imaginary quantities like system quality
and usability, and allows presenting it in a way intuitively accessible for human perception.
In addition, special interaction techniques facilitate the handling of the provided
representations. The idea of supporting the analysis of complex embedded systems by using
VR technology is pursued by the project ViERforES (ViERforES, 2011) and its successor
ViERforES 2 (ViERforES, 2011). These projects especially aim at improving the quality of
complex embedded systems by providing methods and techniques for virtually accessing
and evaluating particular system characteristics such as safety, security, and reliability.
Regarding the analysis and evaluation of safety-related properties, the goal is to identify
critical system parts, relating them to possible system failures, and providing quantitative
measures concerning the probability of occurrence of hazardous situations. A system failure
in this sense is an undesired deviation of the actual behavior from the specified one.
Performing such an analysis necessitates the abstraction of certain system properties to yield
Quality Assurance and Management
330
a view that represents a reduced image of the system. To accomplish this, most common
techniques rely on graph- or text-based approaches (see section on safety analysis). These
allow capturing specific safety-related aspects of the system under investigation. However,
in general this entails the loss of context information, which may also indirectly contribute
to system failures and hence is important with regard to the completeness of the analysis.
When considering embedded systems, the failing components at the most abstract stage can
be hardware (HW) or software (SW). By nature, HW and SW components have a great
variety of characteristics, modalities, and working conditions, and are generally not
representable by a single model. For example, installation prerequisites, exposure to
environmental interferences, as well as mutual interference between HW components are
additional properties not reflected by the models used for safety analysis.
Lets assume that the safety of a control unit exposed to internal/external forces such as
extreme heat, shock, and/or radiation has to be evaluated. Here, only a safety analysis is
capable of making assumptions about the failure probability of the controller and how it
may contribute to a system crash. However, it does not consider the ways the controller
correlates with the aforementioned physical factors, i.e., it cannot answer the question
whether or not there is an actual dependency between the way the controller is installed and
the systems safety. Deriving cross-related knowledge from other models or system views is
not possible from the safety models or is only provided up to a certain limit. To ascertain
such extended coherences, the incorporation of knowledge/information from additional
sources is required. Collecting all relevant information and representing them in a suitable
way is necessary for the hidden relations to become apparent.
The above observations hold for HW as well as for SW, which has a variety of essential
characteristics that indirectly contribute to safety. For example, important issues for
assessing the criticality of a SW component can be its complexity (e.g., lines of code, number
of dependencies between components, etc.), its state space situation, or its dependencies
between workload and the system response time in critical scenarios. Again this represents
context information not always considered in standard safety models.
Another important aspect concerns the distribution of the components of an embedded
system. Generally, the sort of systems that belong to this category feature the property of
being distributed. This means that communication takes place, which might also be affected
either directly by intended attacks or indirectly by physical interferences. The connection
between the vulnerability of communication channels in general and the way they affect the
safety/security criticality are explored best if there is a combined virtual sight.
In the ViERforES 2 project, VR is used to combine safety-related information with such kind
of hidden context information. This provides the chance to visually integrate safety-
critical relationships with the corresponding static and dynamic physical dependencies of
the investigated system. The related paper (Al-Zokari, 2010) proposes a way to link static
safety-related information in the form of Minimal Cut Sets (MCS) (see section 3.1) with
information about the physical system structure. A direct visual connection between the
critical components and the ways they cause the system to fail is established. A new
metaphor representing all possible constellations of cause-effect relationships allows the
effective identification of most critical failure causes. The linkage between the MCS safety
indicators and the physical context information in the form of a geometric representation of
Quality Improvement Through Visualization of Software and Systems
331
the system components is based upon highlighting those components that contribute to a
selected failure scenario. The tool allows to intuitively trace the causes of safety-critical
system failures back to the components responsible for their origination. This way the users
(safety engineers and system engineers) can explore relations that could help, for example,
to efficiently identify critical system regions. Moreover, it provides a common view for
system and safety engineers to support inter-connected collaboration.
The ongoing research could be seen as a starting point regarding further development
aimed at the integration of multiple models from complex embedded systems. The
possibilities of application of the VR technology are various and provide great potential
concerning future research.
Virtual Reality (VR) provides promising possibilities for visually assessing the
characteristics of large embedded systems. Analyzing functional and non-functional aspects
generally necessitates uncovering hidden properties and relations between system parts that
heavily affect overall system functioning and system quality. Particularly, properties related
to software are not always visible at first glance. The research within the ViERforES (Virtual
and Augmented Reality for Maximum Safety and Reliability of Embedded Systems) project
(ViERforES, 2011) concentrates on capturing and visualizing qualitative aspects of safety-
critical systems to support system analysis and improvement. The process of tracing back
undesired system characteristics to their roots constitutes the first step in identifying critical
parts of a system. Generally, this produces huge amounts of data that are strongly correlated
and not accessible without the usage of the proper context information. The adoption of VR
techniques allows the user to look at every aspect of the system in detail. Furthermore, it
facilitates the exploration of hidden properties and supports the collaboration of domain
experts such as system and safety engineers. It associates safety-related information with
virtual models of the examined systems and provides interaction techniques to support the
process of identifying safety-critical elements.
4. Conclusion
The visualization of software and systems is becoming increasingly important for many
organizations. Well-known visualization and interaction techniques are applied to obtain
better insight into and control over system development processes and the quality of
produced products. Even though these methods have proven to be advantageous, more
domain-specific, user-centered approaches are necessary to support users in recognizing
and finding relevant information more easily. Based on practical examples from industry
and the experience of the authors, this chapter presented an overview of such goal-oriented,
domain-specific visual exploration tools in the software engineering domain.
We showed that tightly coupling the specification and selection of visualization techniques
with the specification and selection of metrics used to collect measurement data better
supports the visual recognition of software product, process, and project characteristics and
their interrelations.
In addition, we presented visualization techniques aimed at a better understanding of
system properties such as safety and security in highly complex, dynamic embedded
systems.
Quality Assurance and Management
332
More sophisticated human-centered visual exploration techniques are needed to be able to
analyze such system properties, which generally necessitates uncovering hidden properties
and relations between system parts that heavily affect overall system functioning and
system quality. The presented work allows interactively exploring information associated
with the results of a safety analysis to maintain an overview of critical elements and
relations. Approaches like the matrix-based representation presented here facilitate the
understanding of the structural composition of failure causes and, in particular, allow to
efficiently determine weak points of safety-critical systems.
5. References
ALD RAM Commander. (2011) http://www.aldservice.com.
Al-Zokari, Y., Khan, T., Schneider, D., Zeckzer, D., Hagen, H. (2010). CaKES: Cake Metaphor
for Analyzing Safety Issues of Embedded Systems. Dagstuhl Follow-Ups.
Ball, T., Eick, S. (1996). Software visualization in the large. IEEE Computer, pp. 3343.
Balzer, M., Noack, A., Deussen, O., Lewerentz, C. (2004). Software Landscapes: Visualizing
the Structure of Large Software Systems. In: Proceedings of the Joint Eurographics -
IEEE TCVG Symposium on Visualization (VisSym), pp. 261-266.
Barret, M., Blackledge, J. Eugene, E. (2010). Using Virtual Reality to Enhance Electrical Safety
and Design in the Built Environment. Dublin: Dublin Institute of Technology.
Battista, G. D., Eades, P., Tamassia, R., Tollis, I. G. (1999). Graph Drawing: Algorithms for the
Visualization of Graphs. Prentice Hall, Upper Saddle River, NJ, USA.
Eiglsperger, M., Siebenhaller, M., Kaufmann, M. (2005). An efficient implementation of
Sugiyama's algorithm for layered graph drawing. InGraph Drawing (GD 04), vol. 3383
of Lecture Notes in Computer Science, Springer, pp. 155-166.
ESSaREL. (2011). http://www.essarel.de.Fekete, J.-D., Wang, D., Dang, N., Aris, A.,
Plaisant, C. (2003). Overlaying Graph Links on Treemaps. In Proc. InfoVis03, Poster
Compendium, IEEE Press.
Gansner, E. R., Koutsos, E., North, S. C., Vo, K. P. (1993). A Technique for Drawing Directed
Graphs. IEEE Trans. Softw. Eng. 19, 3, pp. 214-230.
Heidrich, J. Mnch, J. (2010). Goal-oriented customization of software cockpits. Journal
of Software Maintenance and Evolution: Research and Practice, Volume 22 Issue
5.
Heng, P.A., Cheng, C.Y., Wong, T.T., Xu, Y., Chui, Y.P., Chan, K.M., Tso, S.K. (2008). A
virtual-reality training system for knee arthoscopic surgery. IEEE Transaction on
Information Technology in Biomedicine 8 (2), pp. 217-227.
Herman, I., Melancon, G., Marshall, M. S. (2000). Graph Visualization and Navigation in
Information Visualization: A Survey. IEEE Transactions on Visualization and
Computer Graphics 6 (1), pp. 2443.
Holten, D. (2006). Hierarchical Edge Bundles: Visualization of Adjacency Relations in Hierarchical
Data. IEEE Transactions on Visualization and Computer Graphics (Proc. of
INFOVIS06) 12 (5), pp. 741748.
Instantiations CodePro Studio. (2011). http://www.instantiations.com
ISOGRAPH FaultTree+. (2011). http://www.isograph-software.com.
ISO International Organization for Standardization. (2011). http://www.iso.org
Quality Improvement Through Visualization of Software and Systems
333
JDepend. (2011). http://clarkware.com
Johnson, B., Shneiderman, B. (1991). Tree-maps: A spacefilling approach to the visualization of
hierarchical information structures. Proceedings of Visualization 91, (San Diego,
California), pp. 284291.
Kaufmann, M., Wagner, D. (2001). Drawing Graphs, Methods and Models. Lecture Notes in
Computer Science, Springer Verlag.
Kreylos, O., Bethel, E.W., Ligocki, T.J., Hamann, B. (2003). Virtual-Reality Based Interactive
Exploration of Multiresolution Data. In: G. Farin, H. Hagen and Bernd Hamann:
Hierarchical Approximation and Geometrical Methods for Scientific Visualization.
Springer Verlag, pp. 205-224.
Kruskal, J. B., Landwehr, J. M. (1983): Icicle Plots: Better Displays for Hierarchical Clustering.
The American Statistician 37 (2), pp. 162168.
Lommerse, G., Nossin, F., Voinea, L., Telea, A. (2005). The Visual Code Navigator: An
Interactive Toolset for Source Code Investigation. Proceedings of the 2005 IEEE
Symposium on Information Visualization, IEEE Computer Society.
McCabe IQ. (2011). http://www.mccabe.com
Metrics Eclipse Plugin. http://sourceforge.net/projects/metrics
Oliveria, D.M., Cao, S.C., Hermida, X.F., Rodrguez, F.M. (2007). Virtual Reality System for
Industrial Training. IEEE International Symposium on Industrial Electronics, pp.
1715-1720.
Purschke, F., Schulze, M., Zimmermann, P. (1998). Virtual Reality - New Methods for Improving
and Accelerating the Development Process in Vehicle Styling and Design. Computer
Graphics International.
RelexArchitect. (2011). http://www.relexsoftware.co.uk.
Rech, J., Weber, S. (2005). Werkzeuge zur Ermittlung von Software-Produktmetriken und
Qualittsdefekten- Studie zu Software-Messwerkzeugen. Fraunhofer IESE.
RELIA BlockSim. http://www.reliasoft.com/BlockSim.
Stasko, J., Zhang, E. (2000). Focus+context display and navigation techniques for enhancing radial,
space-filling hierarchy visualizations. In INFOVIS '00: Proceedings of the IEEE
Symposium on Information Visualization 2000, pp. 57-68.
Soto, M., Ocampo, A., Mnch, J. (2008). The Secret Life of a Process Description: A Look into the
Evolution of a Large Process Model. International Conference on Software Process
(ICSP) - Proceedings. Berlin: Springer, pp. 257-268.
Sotograph. http://www.software-tomography.de
Sugiyama, K., Tagawa, S., Toda, M. (1981). Methods for Visual Understanding of Hierarchical
System Structures. IEEE Transactions on Systems, Man, and Cybernetics SMC-11(2),
pp. 109-125.
SYNC DPL-Faulttrees. (2011).
http://www.syncopationsoftware.com/faulttree.html.
Termeer, M., Lange, C. F., Telea, A., Chaudron, M. R. (2005). Visual Exploration of Combined
Architectural and Metric Information. VISSOFT '05 Proceedings of the 3rd IEEE
International Workshop on Visualizing Software for Understanding and Analysis,
IEEE Computer Society.
ViERforES Project. (2011). http://www.vierfores.de.
Quality Assurance and Management
334
Yang, Y., Zeckzer, D., Liggesmeyer, P., Hagen, H. (2011). ViSSaAn: Visual Support for Safety
Analysis. Dagstuhl Follow-Ups, Vol. 2.
18
Automatic Maintenance Routes Based on
the Quality Assurance Information
Vesa Hasu and Heikki Koivo
Aalto University, Department of Automation and Systems Technology
Finland
1. Introduction
Maintenance and repairing of widely distributed and large scale networks of sensors and
actuators can easily become overwhelming physically and financially. This applies
especially, if the units are located so that performing the maintenance operations is neither
easily accessible nor cheap. In order to make effective and efficient maintenance decisions,
we need methodologies for describing the condition of the units. For that purpose, we
propose using general quality concept descriptions. This methodology links linguistic terms
and numerical values into easily understandable concepts on the network performance.
The market interest in large-scale networks has risen with the ability to utilize wireless
communication nodes. The arranging of the maintenance of such large-scale networks
becomes tedious due to sheer size of the problem. In this work, we assume a network, which
is distributed spatially in wide area. That is, the movement of maintenance personnel takes
much time and physically this means that repairing every occurring fault is too time time-
consuming. Economically this means that the distances are large enough to cause significant
costs. Statistically widely distributed means that measurement stations next to each other
are not exactly valid reference measurements for reliability estimation. In overall, any
automated help is welcome to making automated maintenance decisions.
In our approach, we take the essential thing is to express the operation of a device in a
simple numerical form of one index and analyze device maintenance needs based on the
numerical value. In general we consider this index as reliability. In here, the reliability refers
specifically to the unit performance reliability. That is, this reliability refers to a larger
concept than an occurrence fault failure. This is because, for example, in the measurement
networks an exact detection of faults is impossible or fuzzyfied.
In Isermann (2006) reliability is defined as the ability of a system to perform a required
function under stated conditions, within a given scope, during a given period of time and
availability is defined as probability that a system or equipment will operate satisfactorily
and effectively at any period of time. These definitions apply at some level in this work too,
but since the errors are not exactly traceable, we aim to use performance indices to describe
these concepts instead of e.g. failure probabilities or failure densities. Hence, in our work,
the proposed concepts of reliability and availability are described by indices varying
between 0 and 1. We emphasize that these indices are not probabilities; they are measures of
performance in the index framework.
Quality Assurance and Management
336
The reliability in a spatially distributed system is considered e.g. by Sun et al. (2005), which
approaches the reliability through redundant measurements and voting procedures. In here
the redundancy of measurements is not assumed, only through the spatial dependency of
the measurement field.
De Souza et. al. (2005) explore monitoring of power networks with a fitness function
methodology, which include the critical system measurement weighting. In the context of
logistics systems, spatially distributed systems are considered by Wang et al. (2006), who
describe accurate mathematical definitions of reliability.
In here, more emphasis is laid on describing the overall ideas in measurement networks and
going through mathematical details by a case example on weather station networks. This
chapter is based on the performance indices to the measurements networks presented by
Hasu and Koivo (2007, 2009) but we consider new and improved methods for route solving.
Additionally, we emphasize that the automatic maintenance route approach can be utilized
in actuator networks. In this case, the performance indices used for industrial plant level by
Hltt and Koivo (2009, 2011) are interesting.
This chapter studies application of the quality assurance knowledge in the automatic
maintenance route planning. The original framework is aimed at sensor network
maintenance but the basic ideas of route planning are transferable also into actuator
networks. The suggested approach has three essential stages: the basic quality assurance, the
evaluation of performance indices and the maintenance route planning.
At first, quality assurance techniques determine whether sensors and/or processes work
correctly or suffer from suspicious behavior. Second, specially designed performance
indices are applied to describe the observation history. The key is to describe the reliability
in one index as well as possible. The strengths of the performance index approach include
that it enables forgiving bad functioning periods. If the problems are gone, maintenance
actions for that component are futile and they result in unnecessary costs. The second main
strength of performance indices is the ability to give a quick overlook on the performance
without a need to see the whole history with its QA information. The third stage of our
approach is the automatic planning of maintenance routes based on performance indices.
Since this route-planning problem is close to the travelling salesman problem, routes are
solved using either heuristic or evolutionary computing methods using somewhat similar
ideas. This chapter demonstrates the approach using surface weather stations.
The maintenance route-planning problem (MRPP) discussed in this paper is a version of a
multiple TSP with profits, in some cases named as a multivehicle routing problem with
profits (Feillet et al. 2005). MRPP has similarities also to a team orienteering problem (Chao
et al. 1996a). However, we derive cost functions and constraints from a different point of
view, and therefore the problem has a unique nature. The main differences are time-limited
routes and multi-objective nature, which are included in MRPP. We provide solutions
MRPP problem using heuristic and ant colony optimization (ACO) algorithms. The heuristic
algorithm has similarities to the heuristic solution to the team orienteering problem
presented in Chao et al. (1996b). Other solving algorithms are based on evolutionary
computing methods. ACO is considered based on the vehicle routing approach (see Bell and
McMullen 2004 and Yu et al. 2009). Additionally, a genetic algorithm (GA) for MRPP based
on the ordinary GA solutions for TSP is presented in Hasu and Koivo (2009). Since we have
found that ACO is more efficient for MRPP, we do focus on this solution in Section 3.
Automatic Maintenance Routes Based on the Quality Assurance Information
337
2. From quality information to the maintenance variables
Quality assurance systems process huge amounts of data and form information on the
state of the process, the quality of which is under interest. From the maintenance
perspective, the first issue to consider is how large the maintenance need of a sensor or
actuator is. The reliability is considered through other concepts. In measurement
networks, we can consider the reliability through availability and accuracy of
observations. Availability refers to the ratio of available observations and the expected
number of observations. Accuracy refers to the estimated accuracy of the measurement.
Reliability is the combined effect of the availability and accuracy. That is, if either
availability or accuracy is compromised, the measurement is not reliable. In probabilistic
terms, the reliability l can be seen as the intersection of the availability and accuracy. That
is, a completely reliable measurement is both available and accurate all the time. All
described concepts are measured by indices varying from 0 and 1 with larger values
corresponding to the better performance.
Hltt (2009) has stated requirements for the plant performance indices, which are
applicable for the maintenance variables in this chapter. First, no additional measurements
should be required for the determination of indices. Second, setting up the indices should
happen automatically. Third, the indices should be easy to understand. Fourth, the high
level information should indicate the user easily towards the problematic point. The above
concepts of reliability, availability and accuracy suit the demands very well.
The maintenance strategy of a sensor and actuator network should always be made
according to the needs of the network. That is, the acceptable inaccuracy in operation should
not affect the performance indices. In the end, the operational condition depends on the
defined reliability, and therefore the reliability concept should include all of the essential
elements to be reflected in the maintenance and nothing else.
The linguistic concepts depend on the mathematical definitions, which must be made
according to the case. For example, different measurement networks have different
requirements in spatial and temporal resolutions, as well as the measured fields have
different time constants and spatial dependencies. For the spatial resolution, one factor
influencing the mathematical definitions of performance indices is how acceptable is the
estimation of missing measurements based on the neighbor measurement stations. A related
issue is the ability to estimate the missing measurements. This could be rephrased as the
ratio between the average station spacing and the desired spatial accuracy. In the temporal
resolution, the essential issue is the difference between the systems time constant defining
the dynamical behavior of the system and the sampling interval. This is related to the
question of criticality of occasional missing measurement values.
2.1 Performance indices for sensor networks
The maintenance of a measurement network must be considered through the need for
maintenance in each measurement. In here, the measurement reliability is considered
through two other concepts: availability and accuracy. Availability refers to the ratio of
measurements being available. Accuracy refers to the estimated accuracy of the
measurement. The essence of this subsection is presented in Hasu and Koivo (2007).
Quality Assurance and Management
338
Availability s
i
expresses the availability ratio of the measurement i. If the measurement i has
not ever been missing from the data bank, s
i
= 1. If the measurement i has always been
missing, s
i
= 0. The measurement might be missing, for example, due to communication or
measurement device errors.
The accuracy t
i
describes the estimated accuracy of the measurement i. The accuracy takes
into account all known defects in the measurement accuracy. An accurate measurement
has t
i
equal to one and a definitely inaccurate measurement has t
i
close to zero. Hence the
input of the accuracy can be e.g. decision variables of the fault detection. As in the
availability, the accuracy should put emphasis on the most recent events. Additionally, if
different types of errors, e.g. noise or drift, can be detected, all of these should be
integrated into t.
Reliability is the combined effect of the availability and accuracy. That is, if either
availability or accuracy is compromised, the measurement is not reliable. In probabilistic
terms the reliability l can be seen as the intersection of the availability and accuracy. That is,
a completely reliable measurement is both available and accurate all the time.
Since the measurements might run for long periods, it is advisable to use recursive
techniques in order to have more emphasis on more recent events and reduce the
computational requirements. Basically, this recursion increases and decreases the
availability depending whether or not the measurement is available.
In Hasu and Koivo (2007), the availability was considered through the recursion
( 1) (1 ), if ( ) ,
( ) ( 1), if ( ) and s.t. ( ) ,
( 1), if ( ) ,
i i
i i i j
i j
s k x k M
s k s k x k M j S x k M
s k x k M j S
+ e
= e - e e
e e
(1)
where is the forgetting factor of recursive methods, e (0, 1), M is the set of missing
observations and S is the set of measurement stations in the system. In here serves also as
a penalization factor (1) shows that smaller causes a larger decrease in s when the
measurement is missing and larger increase if the measurement is available. Hence the
small forgetting factor results in a smaller dependency to s further back in history. Note also
that (1) does not penalize a single measurement station if all simultaneous observations are
missing in the system. This is since these types of problems often refer to communication or
database problems, which are not related to measurement stations.
The update on the accuracy index can depend very much on application. The simplest way
is to utilize the existing quality control tests for the observation in similar fashion to (1). That
is, the accuracy can be updated through a recursion
( 1) (1 ), if ( ) ,
( )
( 1), if ( ) ,
i i
i
i i
t k x k E
t k
t k x k E
+ e
=
e
(2)
where is the forgetting factor for accuracy, e (0, 1), and E is the set of erroneous
observations.
Automatic Maintenance Routes Based on the Quality Assurance Information
339
However, if the applied quality assurance techniques follow the measurement quality
closer, their statistics can be utilized in the accuracy computation. Hasu and Koivo (2007)
present an example, in which the filter residual r
i
(k) and its respective standard deviation o
i,r
update the accuracy. Mathematically this is essentially represented by
( ) ( )
( )
( )( )
1 2 1 2 min
2 2 2 2
( ) ( 1) 1 1 ( ( ), ( ) 1 1 ( ( ), ( )
i i i i i i
t k t k f r k k g k k
o o o = + + + , (3)
where
1
and
2
are forgetting factors for relative and absolute inaccuracies of the
measurement, and
( )
0, ( ) 3 ( ),
( ( ), ( ))
2 ( ) ( ) 4 , ( ) 3 ( ),
i i
i i
i i i i
r k k
f r k k
P r k k r k k
o
o
o o
<
=
>
(4)
( )
min min
( ( ), ( )) 3 ( ) ( ) 9
i i i i
g k k P k k o o o o = , (5)
( )
( )
1
1
x
P x e
= + , (6)
where
min
i
o is the minimum residual standard deviation in the measurement network, and
P is the sigmoid function. Even though the update (3)(6) looks a bit complicated, it includes
only simple computations with variables.
As mentioned, the reliability is considered as the intersection of availability and accuracy.
Hence, as in probability theory, we define the reliability as the product of these two:
l
i
(k) = s
i
(k)t
i
(k). (7)
Note that this definition enables the easy use of additional performance indices as the
availability and accuracy in the determination of reliability. For example, other accuracy
variables can be included in the form of t = t
1
t
2
t
n
, where the superscripts indicate the
numbers of accuracy subindices. In (7), we could use a variety of methods to integrate
different performance indices into higher level indices (see Hltt 2009 or Hasu and Koivo
2009). The other possibilities include taking minimum, maximum, arithmetic mean,
harmonic mean or any other type of central tendency measure.
Hasu and Koivo (2007) present a numerical example of the performance indices for a
weather sensor network. Figure 1 shows the availability and accuracy indices measured
using the updates (1) and (3), respectively. Based on Figure 1, three stations can be described
as follows. Kaukas station temperature measurement has poor availability and accuracy.
Luhtaanmki and Huhtionmki stations suffer from a compromised temperature
observation quality, and Luhtaanmki has also occasional missing observations. The
corresponding reliability values from these stations are drawn in Figure 2, where also a
reference station of Kantele is included.
Figure 3 shows the observations from a reference station of Kantele, which does not suffer
from any problems, as well as the Kaukas and Huhtionmki stations presented in Figure 1.
Comparing the Huhtionmki observations with the Kantele observations shows how the
Quality Assurance and Management
340
Kantele measurement suffers from noise in the five-minute sampling, and therefore the
accuracy is compromised. Figure 3 shows that problems of Kaukas Station relate to a
massive number of missing observations and large noise in the daytime observations.
2.7. 14.7. 26.7.
0.7
0.8
0.9
1
A
c
c
u
r
a
c
y
t
2.7. 14.7. 26.7.
0.5
0.6
0.7
0.8
0.9
1
A
v
a
i
l
a
b
i
l
i
t
y
s
Huhtionmki
Kaukas
Luhtaanmki
Fig. 1. Availability s and accuracy t from three temperature measurement stations in the
Southern Finland.
2.7. 14.7. 26.7.
0.4
0.5
0.6
0.7
0.8
0.9
1
R
e
l
i
a
b
i
l
i
t
y
l
Huhtionmki
Kaukas
Luhtaanmki
Kantele (reference)
Fig. 2. The reliabilities of the above stations with a reference station Kantele.
In overall, the above numerical example exemplifies how the measurement quality can be
described easily using a few index. First, the reliability index shows the overall quality.
Second, the accuracy and availability describe the sources of potential problems. If desired,
the hierarchy on the accuracy side could be further constructed to identify the nature of the
problems thus helping to choose the correct types of maintenance actions.
Automatic Maintenance Routes Based on the Quality Assurance Information
341
15.7. 16.7. 17.7.
10
15
20
25
30
T
e
m
p
e
r
a
t
u
r
e
(
o
C
)
Kantele
15.7. 16.7. 17.7.
10
15
20
25
30
Huhtionmki
T
e
m
p
e
r
a
t
u
r
e
(
o
C
)
15.7. 16.7. 17.7.
10
15
20
25
30
T
e
m
p
e
r
a
t
u
r
e
(
o
C
)
Kaukas
Fig. 3. Observations from Kantele (top left), Huhtionmki (top right) and Kaukas (bottom)
stations.
2.2 Performance indices for actuator networks
In the actuator networks, the actuator performance relates to the control performance of the
(sub-)system. Hltt and Koivo (2011) presents several performance indices for the
determination of the control performance. Some of the performance indices are more
application-related but in the following, we have collected a few generic performance
indices for actuator performance.
The first actuator performance index, the duration of setpoint error, originates from the
work of Jms-Jounela et al. (2003). This index follows the control loop performance by
detecting the time of permanent error. That is, this index indicates if the control loop suffers
from a permanent error. The duration index is updated using
lim
lim
sgn( ), if ,
( ) ( 1) (1 )
0, if ,
e e e
I k I k
e e
>
= +
(8)
where e is the tracking error between the setpoint and system output, e
lim
represents the
boundary of the acceptable region and sgn stands for the signum function. Since our goal is
Quality Assurance and Management
342
to have positive indices, for which zero and one stand for poor and good performance,
repectively, and we are not interested in the sign of the setpoint error, the final index is
( ) ( )
50
25
( ) ( )
k
k P I k q q = . (9)
That is, the absolute value of I is scaled using the sigmoid function (6) using constants k and
q
50
, which describe respectively the scale and location (midpoint) of the sigmoid. The scaling
constants depend on the application. Additionally, Hltt and Koivo (2011) present a
variation of (8) for the magnitude of the set point error, using essentially the following
( )
2
lim lim
lim
sgn( ) sgn( ) , if ,
( ) ( 1) (1 )
0, if .
e e e e e e
I k I k
e e
>
= +
(10)
Again, the final index is obtained using (9). Obviously, this index describes the temporally
weighted average for the setpoint error.
More detailed control performance indices can be formed. Hltt (2009) presents a version
of sluggish control index originally introduced by Hgglund (1999). This index grows if the
control loop follows the control signal slowly. The index is defined as
( ) ( ) ( 1) (1 ) sgn I k I k u y = + A A , (11)
where Au and Ay are the control and output increments, respectively. The values close to
one indicate a sluggish control loop. Due to possible negative values, Hltt uses the scaling
similar to (9) in order to form the final performance index.
A numeric simulation exemplifies the strength of this approach. We simulate a system
described in Figure 4, including a plant with transfer function 1/(s2 + 2s + 2) and a PI-
controller. The pulse-like reference is drawn as the black line in Figure 5. The controller is
applied with two tunings, from which the first one (K = 2, T
i
= 2/3) is much slower than the
second one (K = 1/2, T
i
= 1/2), to which the controller is switched at t = 50.
The system output is plotted in blue in the top of Figure 5. The first tuning reaches the
reference slowly compared with the second tuning. This is visible also in the performance
index for sluggish control, which is included in the bottom of Figure 5. The permanent error
index behaves similarly. It, however, does not reach as low values due to the change of
reference. The performance indices are combined into a loop index (the black dotted line at
the bottom of Figure 5) using multiplication.
Fig. 4. The simulated control loop.
Automatic Maintenance Routes Based on the Quality Assurance Information
343
0 10 20 30 40 50 60 70 80 90 100
0
0.5
1
V
a
l
u
e
0 10 20 30 40 50 60 70 80 90 100
0
0.2
0.4
0.6
0.8
1
P
e
r
f
o
r
m
a
n
c
e
i
n
d
e
x
Output
Reference
Permanent error index
Sluggish control index
Loop index
Fig. 5. The simulated output (top) and performance indices (bottom).
2.3 Performance Indices using fuzzy inference
In addition to the recursive techniques, the performance indices can be calculated using
other methods as well as the requirements for the indices mentioned at the beginning of
Section 2 are met. One interesting option is to use fuzzy inference. Hasu and Koivo (2009)
have presented one version how to apply fuzzy inference for the measurement accuracy and
availability performance indices.
The idea of the fuzzy system is to replace the equations (1)(6), which are applied in the
index computation. Hence the inputs to the fuzzy inference include the previous index
value. The other input to the accuracy is the QA information about the erroneousness of the
observation and for the availability the other input is the period from the previous
observation (as a multiple of sampling time). The applied fuzzy system is based on the
Mamdani inference with triangular membership functions and multiplicative intersection,
implication and aggregation. The membership functions for the accuracy and availability
are presented in Figure 6.
The fuzzy rules for the accuracy and availability are collected into Table 1. The resulting
fuzzy interference surfaces are included in Figure 7. Note that for the accuracy we have used
only good/erroneous observation classification for the measurement quality this
corresponds to the accuracy index presented by (2).
Quality Assurance and Management
344
0 0.2 0.4 0.6 0.8 1
0
0.5
1
Erroneous observat ion Good observat ion
I
n
p
u
t
:
Q
A
f
l
a
g
Fuzzy sets for Accuracy
0 0.2 0.4 0.6 0.8 1
0
0.5
1
Small Large Medium
I
n
p
u
t
:
T
h
e
p
r
e
v
i
o
u
s
A
c
c
u
r
a
c
y
-0.2 0 0.2 0.4 0.6 0.8 1 1.2
0
0.5
1 Small
Large Medium-Large Medium-Small
Medium
O
u
t
p
u
t
:
A
c
c
u
r
a
c
y
0 0.2 0.4 0.6 0.8 1
0
0.5
1
I
n
p
u
t
:
T
h
e
p
r
e
v
i
o
u
s
A
v
a
i
l
a
b
i
l
i
t
y
Small Large
0 2 4 6 8 10
0
0.5
1
I
n
p
u
t
:
T
i
m
e
f
r
o
m
t
h
e
p
r
e
v
i
o
u
s
o
b
s
e
r
v
a
t
i
o
n
Fuzzy sets for Availability
Normal Medium Large
-0.5 0 0.5 1
0
0.5
1
O
u
t
p
u
t
:
A
v
a
i
l
a
b
i
l
i
t
y
Normal Medium Large Medium-small
Fig. 6. The fuzzy sets for the accuracy and availability indices.
Accuracy Availability
Input: QA
indication for the
observation
Input: The
previous
accuracy
Output:
Accuracy
Input: Time from
the previous
observation
Input: The
previous
availability
Output:
Availability
Good Large Large Normal Large Large
Good Medium Medium-large Normal Small Medium-small
Good Small Medium-small Medium Large Medium
Erroneous Large Medium Medium Small Medium-small
Erroneous Medium Medium-small Large Large Small
Erroneous Small Small Large Small Small
Table 1. Fuzzy inference rules.
0
1
0
0.25
0.5
0.75
1
0
0.5
1
The previous accuracy
Flag
A
c
c
u
r
a
c
y
QA flag
1
2
4
6
8
10 0
0.25
0.5
0.75
1
0
0.5
1
The previous availability Multiple of sampling time
from the previous observation
A
v
a
i
l
a
b
i
l
i
t
y
Fig. 7. The fuzzy inference surface for accuracy and availability indices.
Automatic Maintenance Routes Based on the Quality Assurance Information
345
3. Automatic maintenance route planning
3.1 Definition of maintenance route planning problem
The maintenance route planning aims for the maximum improvement of sensor network
performance with minimal costs. Since services are nowadays often outsourced, an
automated tendering of subcontractors must occur in the planning stage. Planning
limitations are the number of available technicians and the lengths of working days. The
route planning must take into account the distances between the stations as well as the
maintenance times in each station. Costs include starting, repair, and travelling costs, which
may be subcontractor dependent. Additional information to take into account is the
importance of stations.
MRPP is a multiobjective optimization problem. On one hand, we want to maximize the
network improvement by sending technicians to stations with poor performance, i.e. small
performance indices. On the other hand, we like to keep the maintenance costs as low as
possible while keeping the sensor network performance still in an acceptable level. In
practice, the multiobjective problem means that MRPP will have a Pareto-optimal set of
optimal solutions (e.g. [7]) and therefore the choice of the best route combination is up to
ones preference. In this work, we deal with the problem by presenting so-called Pareto-
boundary found by the algorithm.
The mathematical definition of MRPP starts from a definition of a route matrix R,
,
, , 1
[ ]
n m
i j i j
R
=
,
where n is the maximum route length plus two and m is the number of available technicians.
By definition, the first entry of each column corresponds to the current location, i.e. the
starting point, of the technician. We use station index zero to refer to the depots of
technicians. The rest of column j is for the indices of stations in the order of technician js
route. Since the routes are usually shorter than the maximum route length, the column is
adjoint with a suitable amount of zeros.
MRPP consists of a multiobjective function to be maximized, working day constraints and
minimum gain requirements. In mathematical terms, MRPP maximization is
( )
1 1
, , , 1, ,
1 2 1 2 1 2
max ( ) ( ) 1 ( ) , ( , ) ( ) ,
m n m n m n
i j i j j i j i j i j
j i j i j i
W R l R c d R R C R
e9
= = = = = =
(
= (
(
R
f R (12)
where the first entry is the network performance gain and the second entry is the opposite
number of the cost. 9 is the space of possible route matrices. W(R
i,j
) and l(R
i,j
) are the
importance weight and reliability index, respectively. On the cost side of (12), c
j
is the hourly
cost of technician j, d(R
i,j,
R
i1,j
) is the temporal distance between the ith and the previous
stations in the technician js route and C(R
i,j
) is the maintenance cost of station i by
technician j.
By definition, the depots do not have repair costs, i.e. C(0) = 0, and distance from a place to
itself is zero, i.e. d(i,i) = 0. Note that (12) assumes that the starting point is already repaired,
and hence solving (12) enables the updates of routes during the working day.
The working day constraint for the technician j in MRPP is
Quality Assurance and Management
346
1
, 1, , max,
1 2
( , ) ( ) ,
n n
i j i j i j j
i i
d R R t R T
= =
| |
+ s
|
\ .
(13)
where t(R
i,j
) is the maintenance time of station i of technician j and T
max,j
is the length of
working day of technician j.
Additional constraints for MRPP describe the required performance decrease of a station
before maintenance is considered and the desired minimum gain from a route. These
constraints remove unnecessary routes and maintenance actions, and they restrict the
solution space of the optimization problem. If we define a total route gain of technician to be
G
j
=
( )
1
, ,
2
( ) 1 ( )
n
i j i j
i
W R l R
A +
(16)
where At(i,j) refers to the temporal increase of technician js route if station k is added into
ith station in that route. The time addition At includes both travelling and maintenance time.
In here, available refers to a station, the addition of which satisfies (2), (3), and which is
not already included in routes.
The heuristic algorithm for a subset of technicians follows the outlines described in Table 2.
The route additions are greedy and the station modifications between technicians make sure
that route costs do not grow unnecessarily large.
Automatic Maintenance Routes Based on the Quality Assurance Information
347
In order to make the tendering of subcontractors and to choose the best number of
technicians, the heuristic algorithm determines the routes for all possible subsets of
technicians and chooses the most advantageous route ensemble. For example, if two
subcontractors with one technician are available for the maintenance, the heuristic
determines separate routes for each of them separately (i.e. R is a column vector) and one
route combination with both technicians (i.e. R is a two-column matrix). The algorithm
chooses the route matrix, which maximizes the first entry of f in (12). If a route does not
satisfy (15), the algorithm discards the whole solution in the corresponding route matrix.
WHILE - station index k e R
FIND the maximum ratio (16) over k e R satisfying (13) and (14), and over At(i,j) and ADD index k
into ith slot of the route of technician j
IF - k satisfying the above conditions
END WHILE
END IF
IF moving any station from technician j to other technicians would reduce the total costs
MOVE the selected station from technician j to an another technician
END IF
IF swapping a station from technician j to any other technicians station would reduce the costs
SWAP the selected stations
END IF
END WHILE
Table 2. Heuristic maintenance route determination.
3.3 Solving MRPP: Ant colony optimization
ACO is a widely used method for solving combinatorial optimization problems, to which
group includes also MRPP. ACO is inspired by the way ant colonies find their food in
nature. Basically, ants leave pheromone to mark good routes to find food and the following
ants are likely to choose the route parts with pheromone. In ACO, the routes ranked as good
solutions to the problem receive pheromone, and therefore those parts are more likely used
also in the future.
As mentioned in Section 1, MRPP has similarities to the vehicle routing problem and
therefore our ACO algorithm for MRPP is based on a few vehicle routing algorithms. The bi-
objectivity of the gain function f defined in (12) is taken care of using a similar approach to
Schilde et al. (2009), where two different pheromones are used for the different objectives.
That is, the pheromone additions are done with the similar all-for-the-few-best fashion. We
collect the Pareto-optimal solutions to so-called Pareto-optimal set, in which no solution
dominates completely other (i.e. none of the solutions is better than other in respect to the
both gain function entries). The multiple starting depots of technicians are handled as in Yu
et al. (2011): the first and last locations in routes are set to each technicians depot.
In ACO for MRPP, an ant population of q groups of m ants (m is the number of technicians)
wander through to the possible destinations without violating the MRPP constraints (13)
and (14) for each group. That is, during the route construction phase, m ants start from their
respective depots in random order to build route R
n
, n = 1,,q, to a random station one
station a time.
Quality Assurance and Management
348
The main algorithm for ACO solving MRPP is presented in Table 3. In the following, we
describe the algorithm steps more closely.
COMPUTE heuristic information matrices q
jik1 and q
jik2.
INITIALIZE the pheromone matrices t
jik1 and t
jik2.
WHILE iteration stopping condition is not met
CREATE q groups of m ants with randomized starting order if there are more than one depots.
FOR q groups
WHILE - stations that are feasible to add to current group, i.e. O(R) = C.
FOR ant 1 to ant m.
SELECT randomly a new station to add to the route using weighting based on the
pheromone and heuristic information.
UPDATE the pheromones using the evaporation: t
jika
(1 )t
jika
+ t0.
END FOR
END WHILE
APPLY improvement strategies: route permutation, switching and removing stations, and the
replacing a route from the Pareto-solutions.
END FOR
UPDATE the pheromones with the global update according to the best route combinations based
on the separate gain functions and the equally weighted gain.
UPDATE the set of Pareto-solutions.
END WHILE
Table 3. ACO maintenance route determination.
Before ACO algorithm starts to increase route lengths, the heuristic information and initial
pheromone levels must be determined. The heuristic information is applied in the route
formation for the transition probabilities from one station to another representing the
natural attractiveness of ant j moving from the current station i to the station k. This
attractiveness depends on the gain function, which is maximized. Since we are dealing with
a bi-objective optimization (12), we have separate heuristic information for both of the goals
of f. The heuristic information are calculated using
1
1
( , ) ( )
jik
j
c t i j C k
q =
A +
, ( )
2
( ) 1 ( )
jik
W k l k q = . (17)
The first heuristic information is the inverse of the additional cost and the second is related
to the gain corresponding to maintaining the station k. Note how these compare with the
numerator and denominator of the heuristic methods decision variable (16). In addition to
the heuristic information, the ACO pheromone levels must be initialized. Initially, the
pheromones of technician j moving from station i to station k in respect to the objective a are
set to value t
0
, i.e. t
jika
= t
0
.
In here, the next random station is chosen from the set of stations satisfying constraints (13)
and (14) with probabilities given by
( ) ( )
2 2
1 1 1 2 2 2
2 2
1 1 1 2 2 2
( )
, if ( ),
0, otherwise,
jik jik jik jik
jik jih jih jih jih
h x
p p
h
p v p p
t q t q
t q t q
eO
+
eO
= +
R
(18)
Automatic Maintenance Routes Based on the Quality Assurance Information
349
where O(R) is the index set of stations, which are available for a visit i.e. not visited by any
of the m ants (technicians) and addition of these stations does not violate (13) or (14), and p
a
is the weight of ath goal in (12) for the current group of m ants. If the station is added to a
route of any ant in grouped in R, the station is removed from O(R).
Every time a new station k is added to route R, its pheromone is evaporated in order to
reach the improved diversification of solutions. This means that for other groups of ants,
unvisited stations become more attractive. The pheromone evaporation is done by
t
jika
(1 )t
jika
+ t
0
, (19)
where is a forgetting factor called evaporation constant and a is 1 or 2. Since the
attractiveness of moving between stations i and k does not depend on the direction of
movement, we make also an additional update t
jkia
= t
jika
for symmetry.
After a group of m ants has finalized its routes, i.e. no more stations can be added to routes,
route improvement strategies are applied to reach better solutions. If the strategies improve the
solution at least in Pareto sense (i.e. value at least one objective of f is improved), the
solution is added to the population having originally q solutions. Literature knows a variety
of such strategies (e.g. Yu et al. 2011, Schilde et al. 2009, Bell and McMullen 2004).
In our solution, we use three techniques, from which two first ones are based on the
literature (e.g. Schilde et al. 2009) and the last one is developed especially for this problem.
First, we permutate the stations in the route of each technician to find if the stations can be
arranged to lower cost order. If the route has many stations, we limit the permutations to
50. Second, for a fraction of groups, we either switch one station from route to another or
completely remove one station from the route. The first option tries to minimize the total
costs and the second option finds possible Pareto-optimal solutions. Third, we replace a
single technicians route with a route from the set of Pareto-optimal solutions and see if
the new route combination is better at least in Pareto sense. This way we increase the
number of route combinations using known good routes and improve the Pareto set of
solutions.
In order to emphasize the good solutions, after each round of making all q sets of routes, we
make a global update for the pheromones. The updates are made as in Schilde et al. (2009);
the pheromones of the best solution in respect to one of the entries in gain function (12) is
increased using t
jika
t
jika
+ t
0
, and for the second best solution the update is t
jika
t
jika
+
t
0
/2, where a is the number of the gain function entry.
In addition to emphasize the multi-objectivity, we make also a compromise update between
the gain function entries for the routes, which reach the maximum value when both gain
function entries are weighted equally. These pheromone updates are done by t
jika
t
jika
+
t
0
/2, and for the second best solution the update is t
jika
t
jika
+ t
0
/4, where a is 1 and 2. Also
for the global update, we do the symmetry update t
jkia
= t
jika
.
After each round, the solutions are compared with the Pareto-optimal set of solutions. In the
Pareto-optimal set is included all routes, which do not have completely dominating
solutions, i.e. no other solution has better values in both entries of the gain function f.
Quality Assurance and Management
350
3.4 Maintenance routing examples
The following simulated case examples demonstrate the maintenance routing. In all
simulations, the working day length is limited to 7.5 hours, and the travel times between
stations are calculated based on 60 km/h speed. The MRPP parameters G
min
and g
min
are set
to 2 and 0.5, respectively. In all cases, the heuristic algorithm routes are included to the first
iteration round of ACO as an initialization help for the pheromone. The maintenance takes
0.5 hours per station in the smaller examples and 1 hour per station in the large example. In
our examples we use the initial ACO pheromone value t
0
= 1.
Figure 8 shows a small simulated example of maintenance route formation, in which the
routes of heuristic and ACO algorithms are included. The ACO algorithm was used with 75
ant groups for 50 iterations. In the left part of Figure 8, we have one technician starting from
the depot (black diamond) and in the right part we have two technicians starting from
different depots. The heuristic algorithm routes reach the total gains of 8.9 and 13.2 and the
total costs of 12.5 and 24.0, whereas the ACO algorithm routes have the total gains 8.9 and
13.5 and the total costs 12.4 and 23.1. The ACO routes are chosen from the Pareto set of
solutions based on the closeness to the heuristic solution.
0 50 100 150 200
0
50
100
150
2.3
0.5
0.5
0.8
1.7
0.9
1
0.8
1
1.9
0.6
0.6
1.7
1.6
1.1
0.9
1.4
0.8
km
k
m
0 50 100 150 200
0
50
100
150
2.3
0.5
0.5
0.8
1.7
0.9
1
0.8
1
1.9
0.6
0.6
1.7
1.6
1.1
0.9
1.4
0.8
km
k
m
Fig. 8. Maintenance route examples for two depots. Magenta dots are the stations to be
maintained and the numbers next to them present the maintenance gain available. Black
dotted lines present the heuristic algorithm routes and the green dashed lines are the ACO
routes.
Figure 9 shows an example with larger number of maintenance technicians and stations
requiring maintenance. In here, two depots have both two technicians and one depot has a
technician for the maintenance of the network. The ACO algorithm is run with 100 ant
groups of five for 50 iterations.
For the routes in Figure 9, the heuristic algorithm routes the total cost and gain are 53.9 and
27.0, respectively, whereas the presented ACO route solution has the cost of 53.4 and the
gain of 28.0.
Automatic Maintenance Routes Based on the Quality Assurance Information
351
The experiences on these types of large problems with many technicians having relatively
short routes is that the improvement strategy of picking good routes from the Pareto-
optimal solutions is very important in improving the overall optimization results.
0 50 100 150 200 250 300
0
50
100
150
200
250
300
0.6
2.7
0.9
1.8
0.7
1
2.6
1.7
0.6
1.7
1.9
0.5
0.6
0.8
1
1
0.6
0.8
0.7
1
2.3
1.9
0.9
0.8
1.1
1.4
1
1.2
1.3
0.6
2.5
0.6
0.6
0.6
1.5
2.6
0.9
1.7
1.4
0.9
0.8
km
k
m
Fig. 9. A large maintenance routes example with three depots and five technicians. Magenta
dots are the stations to be maintained and the numbers next to them present the
maintenance gain available. Black dotted lines present the heuristic algorithm routes and the
green dashed lines are the ACO routes.
4. Final remarks
The maintenance is an essential part in the continuum of quality assurance. Automated
maintenance planning can offer a valuable tool for extensive and widely distributed
networks, for which the maintenance managing would otherwise be tedious. The approach
presented in here has three main steps. First, the performance indices are extracted from the
essential QA information. As demonstrated in Section 2, the indices are applicable in sensor
and actuator networks. Second, the performance indices are transformed into gains, which
measure how much maintenance actions can improve the network performance. Third, the
maintenance routes are solved using the methods in Section 3.
Solving the MRPP presented as in Section 3 offers several properties needed in practical
systems; such as the optimization of network performance with given resources, tendering
the outsourced maintenance services on case-by-case-basis, and the ability to update the
maintenance strategy if the situation has changed in the network. The multiobjective nature
of the problem leads to the Pareto-optimal set of solutions and the best solution must be
determined depending on the relation between the improved performance and costs in the
network.
5. Acknowledgments
This work was funded by the Finnish Fund for Automation, Finnish Funding Agency for
Technology and Innovation (Tekes) and Vaisala Oyj.
Quality Assurance and Management
352
6. References
J.E. Bell, and P.R. McMullen, 2004: Ant colony optimization techniques for the vehicle
routing problem, Ad. Eng. Informatics, vol. 18, no. 1, pp. 4148.
I.M. Chao, B.L. Golden, and E.A. Wasil, 1996a: The Team Orienteering Problem, Europ. J.
Operational Res., vol. 88, no. 3, pp. 464474.
I.M. Chao, B.L. Golden, and E.A. Wasil, 1996b: A Fast and Effective Heuristic for the Team
Orienteering Problem, Europ. J. Operational Res., vol. 88, no. 3, pp. 475489.
D. Feillet, P. Dejax, and M. Gendreau, 2005: Traveling Salesman Problems with Profits: An
Overview, Transportation Science, vol. 39, no. 2, pp. 188205.
T. Hgglund, 1999: Automatic detection of sluggish control loops, Control Engineering
Practice, vol. 7, no. 12, pp. 15051511.
V. Hasu, and H. Koivo, 2007: "Maintenance variables for spatially distributed measurement
networks," Proc. IEEE Int. Conf. Systems, Man, and Cybernetics, Montreal, Canada,
IEEE, pp. 13271332.
V. Hasu, and H. Koivo, 2009: "Automatic maintenance route planning of large-scale sensor
networks," Proc. IEEE Int. Conf. Computat. Intellig. for Meas. Syst. and Appl.,
Hong Kong, China, IEEE, pp. 1823.
V. Hltt, 2009: Plant Performance Evaluation in Complex Industrial Applications,
Doctoral Thesis, Helsinki University of Technology, 123 p.
V. Hltt, and H. Koivo, 2009: Quality index framework for plant-wide performance
evaluation, J. Process Control, vol. 19, no. 7, pp. 11431148.
V. Hltt, and H. Koivo, 2011: Performance metrics for web-forming processes, J. Process
Control, vol. 21, pp. 885892.
R. Isermann, 2006: Fault-Diagnosis Systems - An Introduction from Fault Detection to Fault
Tolerance, Springer-Verlag.
S.-L. Jms-Jounela, R. Poikonen, N. Vatanski, A. Rantala, 2003: Evaluation of control
performance: methods, monitoring tool and applications in a flotation plant,
Minerals Engineering, vol. 16, pp. 10691074.
C.M.H. Kuijpers, R.H. Murga, I. Inza, and S. Dizdarevic, 1999 Genetic algorithms for the
travelling salesman problem: A review of representations and operators, Artificial
Intelligence Review, vol. 13, no. 2, pp. 129170.
M. Schilde, K.F. Doerner, R.F. Hartl, G. Kiechle, 2009: Metaheuristics for the bi-objective
orienteering problem, Swarm Intell., vol. 3, no. 3, pp. 179201.
J.C.S. de Souza, M.B. Do Coutto Filho, M.T. Schilling, C. de Capdeville, 2005: Optimal
Metering Systems for Monitoring Power Networks under Multiple Topological
Scenarios, IEEE Trans. Power Systems, vol. 20, no. 4., pp. 17001708.
T. Sun, L.-J. Chen, C.-C. Han, and M. Gerla, 2005: Reliable Sensor Networks for Planet
Exploration, Proc. IEEE Conf. on Networking, Sensing, and Control ICNSC 2005,
pp. 816821.
N. Wang, J.-C. Lu, and P. Kvam, 2006: Reliability Modeling in Spatially Distributed
Logistics Systems, IEEE Trans. Reliability, vol. 55, no. 3, pp. 525534.
B. Yu, Z.-Z. Yang, and B. Yao, 2009: An improved ant colony optimization for vehicle
routing problem, Eur. J. Operat. Res., vol. 196, no 1, pp. 171176.
B. Yu, Z.-Z. Yang, and J.-X. Xie, 2011: A parallel improved ant colony optimization for
multi-depot vehicle routing problem, J. Operational Research Society, vol. 62, no.
1, pp. 183188.
19
Implementation of CVR / IT Methodology on
Outsourced Applied Research to Internship
Environment, Case, Information Technology
Directorate of Bina Nusantara Foundation
Renan Prasta Jenie
Information Technology Directorate,
Bina Nusantara University,
Indonesia
1. Introduction
1.1 Nature of problem
Bina Nusantara Foundation is a Teaching and Learning Corporation. It consists of several
Bodies with distinct responsibilities, and one of them is Information Technology Directorate
(ITD). ITD is responsible in developing and maintaining information technology solution in
whole corporate.
ITD consists of three main divisions, as in Fig 1. The Information System Development
Division (IS Dev) is responsible in developing and maintaining whole foundation
Information System Solution, such as web sites and console applications. The Network,
Data, and Operational Division (Oper) are responsible in building and maintaining Network
Connections, Data Storage and Servers, and daily operational procedure in foundation.
Technology Development Division (Tech Dev) is responsible in maintaining applied
research researchers and Internship partner students for helping the whole directorate.
ITD is ought to publish 20 National Level Research Paper yearly, but they only have 5 non
dedicated researcher, and they called them Research Specialist. ITD need at least about 20
Research Teams to create those paper, or 40 teams for safety. ITD Research is divided into
two Semester yearly, 1st year for Feasibility Study, and 2nd year for Product Research. They
are currently supported by 54 students / 15 teams powered Associate member Research
Internship program. The students are considered as partners, with full turnover per
semester.
1.2 Scope of problem
This study is done to analyze how to Internship Student can be used by Tech Dev as a
Research Outsourcing Body, what to tweak and modify. This study explains how to
maintain students in Research Internship Program, including rewarding and punishment
system.
Quality Assurance and Management
354
Fig. 1. Information Technology Directorate structure.
This study also describes how the Project Management Process Model is implemented.
What changes should be made to modify Project Management Process Model to suite a
Student Outsourced Software Development Environment.
1.3 Importance of problem
This study should be done to copes several issues. Internship Researcher should be utilized
well and rewarded systematically. Failure to do so can cause serious impact to student trust
to ITD, such as lost of faith and even truancy.
Current available Project Management Model normally did not include model for Research
Environment that Outsourced to Student Internship. There is model for Professionally
Outsourced System, but could not be adapted fully due to different philosophy on how to
work with between Students and Professionals.
It is suggested to use CVR / IT Model on Research Project Management System Utilization.
What the impact on core system and Social Impact should be documented. How fast the
adaption time and what to modify should be found. Failure to do so can stop the whole
Research Management System.
1.4 Literary review
We are using (Boehm & Ross, 1989) as definition of software project management, which
shall activate several soft skills (Sukhoo, Bernard, Eloff, Poll, & A., 2008). We chose (CVR/IT
Consulting LLC, 2002) as in Table 1 over several software management processes such as
(Paul, Kunii, Shinagawa, & Khan, 1998), (Goebel III, 2003), (Liu, Kane, & Bambroo, 2003),
(Alba & Chicano, 2006), and (Jalote, 2007); subsequently omitting needs of tools like
(Quantitative Software Management Associates, 2004), (Reid & Wilson, 2007), and (Callahan
& Ramakrishnan, 2007), for internship management as in (True, 2007).
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
355
Group Activities
Project Initiation Activities Assign an initiating Project Manager
Identify the Project Sponsor
Define the Business Need/Opportunity
Identify Business Objectives and Benefits
Define Overall Scope
Define Project Objectives
Identify Project Constraints and Assumptions
Ensure Alignment with Strategic Direction and
Architecture
Identify and Engage Key Stakeholders
Identify Key Potential Risks
Procurement and Resourcing Requirements
Determine Cost/Benefit and Schedule Estimates
Develop a Project Phase Exit Plan
Project
Planning
Activities
Analysis
Phase
Assign a Project Manager
Refine Project Scope
Determine Procurement and Sourcing Strategy
Refine Project Schedule
Resource Planning
Identify Other Resource Requirements
Establish Project Life-Cycle Phase Checkpoints
Refine Project Cost Estimate and Budget
Identify Potential Project Risks
Determine Process for Issue Identification and
Resolution
Develop a Change Management Process
Develop an Organizational Change Management
Approach
Develop a Quality Management Approach
Develop A Project Communication Approach
Develop A Configuration Management (CM) Approach
Project Performance Commitment
Consolidate the Project Plan
Design
Phase
Detailed Designs
Establish a Requirements Traceability Matrix
Manage scope, cost, schedule and quality (Manage
Change)
Manage issues, change and risk
Quality Assurance and Management
356
Group Activities
Establish and report project status
Update Project Performance Commitment document
Obtain approval from the Governance Body at Design
Review
Project Execution and Control
Activities
Manage Risk
Communicate Information
Manage Schedule
Document the Work Results
Manage Organizational Change
Manage Scope
Manage Quality
Manage Costs
Manage Issues
Conduct Status Review Meetings
Review Project Life-Cycle Phases Checkpoints
Execute the Procurement Plan
Administer Contract/Vendor
Update Project Planning Documents
Build & Test
Implementation
Conduct Rollout Acceptance Meeting
Project Closeout Activities Conduct Final Contract Review
Conduct Lessons Learned Meeting
Conduct Knowledge Transfer
Post Project Review
Distribution of Resources
Celebration
Table 1. Project Management Process ( CVR/IT Consulting LLC, 2002).
2. Methods
2.1 Whole design
The whole design shall be explained in 3 parts, stakeholders, methods templates, and
procedures, as in Table 2. The CVR / IT Standard were mapped as in Table 3. The mapping
is necessary to alleviate several problems. In research world, resources often come from
grant that has fixed schedule, so grant must be pursued before researcher procurement.
Furthermore, to maintain whole University research map, all research planned must go
through committee examination. After the permission granted, researcher must procure
student for running the research.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
357
Methods Template This part explains how the activities represented.
Procedures Research
Communication
Activities
This part explains how research plan are
communicated to every researcher and lecturer.
Research Monitoring
Activities
This part explains how researches are monitored.
Research Proposal and
Budgeting Activities
This part explains how the systems accept researcher
proposal and compiling budget on it.
Research Budget
Sounding Activities
This part explains how budget are communicated to
management level.
Research Permission
Grant Activities
This part explains how every proposal granted or
denied.
Research Execution and
Control Activities
This part explains how to control and execute every
research plan granted.
Student Research
Advertisement
Activities
This part explains how the researches are
communicated to student body.
Student Research
Proposal and Budgeting
Activities
This part explains how the systems accept student
proposal and compiling budget
Student Research
Execution and Control
Activities
This part explains how to control and execute every
research plan granted.
Research Evaluation
Activities
This part explains how every researcher and student
is evaluated based on their achievement in their
research.
Research Training
Schedule Commission
Activities
This part explains how research training schedule are
controlled.
Research Schedule
Commission Activities
This part explains how research schedule are
controlled.
Monthly Research
Specialist Monitoring
Activities
This part explains how monthly researcher
monitoring done.
Monthly Research
Student Monitoring
Activities
This part explains how monthly research student
monitoring done.
Weekly Research
Student Monitoring
Activities
This part explains how weekly research student
monitoring done.
Researcher Reward
Activities
This part explains how weekly researcher and
research student rewarded.
Table 2. Whole design.
Quality Assurance and Management
358
CVR / IT Activities
R
e
s
e
a
r
c
h
C
o
m
m
u
n
i
c
a
t
i
o
n
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
P
r
o
p
o
s
a
l
a
n
d
B
u
d
g
e
t
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
B
u
d
g
e
t
S
o
u
n
d
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
P
e
r
m
i
s
s
i
o
n
G
r
a
n
t
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
E
x
e
c
u
t
i
o
n
a
n
d
C
o
n
t
r
o
l
A
c
t
i
v
i
t
i
e
s
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
A
d
v
e
r
t
i
s
e
m
e
n
t
A
c
t
i
v
i
t
i
e
s
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
P
r
o
p
o
s
a
l
a
n
d
B
u
d
g
e
t
i
n
g
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
E
x
e
c
u
t
i
o
n
a
n
d
C
o
n
t
r
o
l
R
e
s
e
a
r
c
h
E
v
a
l
u
a
t
i
o
n
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
T
r
a
i
n
i
n
g
S
c
h
e
d
u
l
e
C
o
m
m
i
s
s
i
o
n
R
e
s
e
a
r
c
h
S
c
h
e
d
u
l
e
C
o
m
m
i
s
s
i
o
n
A
c
t
i
v
i
t
i
e
s
M
o
n
t
h
l
y
R
e
s
e
a
r
c
h
S
p
e
c
i
a
l
i
s
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
M
o
n
t
h
l
y
R
e
s
e
a
r
c
h
S
t
u
d
e
n
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
W
e
e
k
l
y
R
e
s
e
a
r
c
h
S
t
u
d
e
n
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
e
r
R
e
w
a
r
d
A
c
t
i
v
i
t
i
e
s
Assign an initiating Project Manager O O
U
n
i
q
u
e
f
o
r
R
e
s
e
a
r
c
h
U
n
i
q
u
e
f
o
r
R
e
s
e
a
r
c
h
U
n
i
q
u
e
f
o
r
R
e
s
e
a
r
c
h
Identify the Project Sponsor O O
Define the Business Need/Opportunity O O
Identify Business Objectives and Benefits O O
Define Overall Scope O O
Define Project Objectives O O
Identify Project Constraints and
Assumptions
O O
Ensure Alignment with Strategic Direction
and Architecture
O O
Identify and Engage Key Stakeholders O O
Identify Key Potential Risks O O
Procurement and Resourcing Requirements O O
Determine Cost/Benefit and Schedule
Estimates
O O
Develop a Project Phase Exit Plan O
Assign a Project Manager O
Refine Project Scope O O
Determine Procurement and Sourcing
Strategy
O
Refine Project Schedule O
Resource Planning O
Identify Other Resource Requirements O
Establish Project Life-Cycle Phase
Checkpoints
O
Refine Project Cost Estimate and Budget O O
Identify Potential Project Risks O O
Determine Process for Issue Identification
and Resolution
O O
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
359
CVR / IT Activities
R
e
s
e
a
r
c
h
C
o
m
m
u
n
i
c
a
t
i
o
n
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
P
r
o
p
o
s
a
l
a
n
d
B
u
d
g
e
t
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
B
u
d
g
e
t
S
o
u
n
d
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
P
e
r
m
i
s
s
i
o
n
G
r
a
n
t
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
E
x
e
c
u
t
i
o
n
a
n
d
C
o
n
t
r
o
l
A
c
t
i
v
i
t
i
e
s
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
A
d
v
e
r
t
i
s
e
m
e
n
t
A
c
t
i
v
i
t
i
e
s
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
P
r
o
p
o
s
a
l
a
n
d
B
u
d
g
e
t
i
n
g
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
E
x
e
c
u
t
i
o
n
a
n
d
C
o
n
t
r
o
l
R
e
s
e
a
r
c
h
E
v
a
l
u
a
t
i
o
n
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
T
r
a
i
n
i
n
g
S
c
h
e
d
u
l
e
C
o
m
m
i
s
s
i
o
n
R
e
s
e
a
r
c
h
S
c
h
e
d
u
l
e
C
o
m
m
i
s
s
i
o
n
A
c
t
i
v
i
t
i
e
s
M
o
n
t
h
l
y
R
e
s
e
a
r
c
h
S
p
e
c
i
a
l
i
s
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
M
o
n
t
h
l
y
R
e
s
e
a
r
c
h
S
t
u
d
e
n
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
W
e
e
k
l
y
R
e
s
e
a
r
c
h
S
t
u
d
e
n
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
e
r
R
e
w
a
r
d
A
c
t
i
v
i
t
i
e
s
Develop a Change Management Process O O
Develop an Organizational Change
Management Approach
O O
Develop a Quality Management Approach O O
Develop A Project Communication Approach O O
Develop A Configuration Management (CM)
Approach
O O
Project Performance Commitment O O
Consolidate the Project Plan O O
Detailed Designs O O
Establish a Requirements Traceability Matrix O O
Manage scope, cost, schedule and quality
(Manage Change)
O O O O O O O O
Manage issues, change and risk O O O O O O O O
Establish and report project status O O O O O O O O
Update Project Performance Commitment
document
O O O O O O O O
Obtain approval from the Governance Body
at Design Review
O
Manage Risk O O O O O O O O
Communicate Information O O O O O O O O
Manage Schedule O O O O O O O O
Document the Work Results O O O O O O O O
Manage Organizational Change O O O O O O O O
Manage Scope O O O O O O O O
Manage Quality O O O O O O O O
Manage Costs O O O O O O O O
Manage Issues O O O O O O O O
Conduct Status Review Meetings O O O O O O O O
Quality Assurance and Management
360
CVR / IT Activities
R
e
s
e
a
r
c
h
C
o
m
m
u
n
i
c
a
t
i
o
n
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
P
r
o
p
o
s
a
l
a
n
d
B
u
d
g
e
t
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
B
u
d
g
e
t
S
o
u
n
d
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
P
e
r
m
i
s
s
i
o
n
G
r
a
n
t
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
E
x
e
c
u
t
i
o
n
a
n
d
C
o
n
t
r
o
l
A
c
t
i
v
i
t
i
e
s
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
A
d
v
e
r
t
i
s
e
m
e
n
t
A
c
t
i
v
i
t
i
e
s
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
P
r
o
p
o
s
a
l
a
n
d
B
u
d
g
e
t
i
n
g
S
t
u
d
e
n
t
R
e
s
e
a
r
c
h
E
x
e
c
u
t
i
o
n
a
n
d
C
o
n
t
r
o
l
R
e
s
e
a
r
c
h
E
v
a
l
u
a
t
i
o
n
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
T
r
a
i
n
i
n
g
S
c
h
e
d
u
l
e
C
o
m
m
i
s
s
i
o
n
R
e
s
e
a
r
c
h
S
c
h
e
d
u
l
e
C
o
m
m
i
s
s
i
o
n
A
c
t
i
v
i
t
i
e
s
M
o
n
t
h
l
y
R
e
s
e
a
r
c
h
S
p
e
c
i
a
l
i
s
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
M
o
n
t
h
l
y
R
e
s
e
a
r
c
h
S
t
u
d
e
n
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
W
e
e
k
l
y
R
e
s
e
a
r
c
h
S
t
u
d
e
n
t
M
o
n
i
t
o
r
i
n
g
A
c
t
i
v
i
t
i
e
s
R
e
s
e
a
r
c
h
e
r
R
e
w
a
r
d
A
c
t
i
v
i
t
i
e
s
Review Project Life-Cycle Phases
Checkpoints
O O O O O O O O
Execute the Procurement Plan O O O O O O O O
Administer Contract/Vendor O O O O O O O O
Update Project Planning Documents O O O O O O O O
Build & Test O O
Implementation O O
Conduct Rollout Acceptance Meeting O
Conduct Final Contract Review O
Conduct Lessons Learned Meeting O
Conduct Knowledge Transfer O
Post Project Review O O
Distribution of Resources O
Celebration O
Table 3. CVR / IT Mapping.
2.2 Stake holders
These system stake holders are as follows.
Community Development Coordinator. He is in charge of running supporting events
like admission, training, and others.
Technology Development Manager. He is the one who in charge of Technology
Development Division where research done. Research Committee. This is the team to
judge whether one research is feasible to run.
Research Coordinator. He is in charge of daily task in research coordination.
Research Specialist. Researcher for one specific research fields.
Head of Information Technology Directorate, Head of Information Technology
Department and Board of Management. They are in charge of judging research product
and its availability for incubation. Thesis Student. Main source of internship program.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
361
2.3 Methods template
Every activity shall be presented in following fashions.
1. Visual representation of procedures. It shall give the reader who shall do certain
activities and where they shall get and give the deliverables.
2. What points should be considered so the activities can be called success, and failure to
do so can ruin the project.
3. What activities should be done so every success factor can be paid. What deliverables
are made in each activity.
2.4 Procedures
2.4.1 Research Communication Activities
Research Communication Procedure is as in Fig 2. Community Development Officer
describes how the researches are communicated to every researcher.
Fig. 2. Research Communication Procedure Standard.
Research Communication Activities critical success factor is:
1. all Lecturers and Research Specialist in University and Information Technology
Directorate recognize the program,
2. problems emerged and potential remedies are identified, and
3. Technology Development Manager already approves the research communication
report draft.
Research Communication Activities activities is
1. run the Researcher and Lecturers Briefing and report the realization,
2. identify Problems emerged and its potential remedies, and
3. Obtain approval of Research Communication Report Draft from Technology
Development Manager.
Research Communication Activities deliverables is Form R1. Research Communication
Report.
Quality Assurance and Management
362
2.4.2 Research Proposal and Budgeting Activities
Research Proposal and Budgeting Procedure is as in Fig 3. Research Coordinator gathers
every research proposal available.
Fig. 3. Research Proposal and Budgeting Procedure Standard.
Research Proposal and Budgeting Activities critical success factor is
1. Every proposal received is reviewed,
2. The following budget is calculated: Man Power demand, Tools / Machine budget,
Research object budget, Research operational budget, Literature budget, Seminar /
Proceeding / Journal Budget, Awards Budget, Knowledge Sharing Budget, and Student
Briefing Budget, and
3. Every member of research committee already approves the research budget plan draft.
Research Proposal and Budgeting Planning Activities activities are
1. Review every research proposal,
2. Calculate: Man Power demand, Tools / Machine budget, Research object budget,
Research operational budget, Literature budget, Seminar / Proceeding / Journal
Budget, Awards Budget, Knowledge Sharing Budget, Student Briefing Budget, and
3. Obtain approval of Research Budget Plan Draft from Research Committee.
Research Proposal and Budgeting Planning Activities deliverables is Form R2A. Research
Budget and Form R2B. Research Proposal.
2.4.3 Research Budget Sounding Activities
Research Budget Sounding Procedure is as in Fig 4. Research Budget is to be communicated
with board of management.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
363
Fig. 4. Research Budget Sounding Procedure Standard.
Research Budget Sounding Activities critical success factor is
1. Research budget plan is presented to board of management, and every related member
of board of management already approves the research budget plan draft.
Research Budget Sounding Activities activities is
1. Research budget plan presentation and Obtain approval of Research Budget Plan Draft
from Every related member of board of management.
Research Budget Sounding Activities deliverables is as follows. Form R3.Approved
Research Budget.
2.4.4 Research Permission Grant Activities
Research Permission Grant Procedure is as in Fig 5. Research Specialist and Research
Coordinator are to run every research planned.
Fig. 5. Research Permission Grant Procedure Standard.
Quality Assurance and Management
364
Research Permission Grant Activities critical success factor:
1. every proposal received is reviewed,
2. Research Approved Budget is reviewed,
3. Status of every proposal permission is made, and
4. Every related member of research committee already approves the research permission
grant draft.
Research Permission Grant Activities activities is
1. Review every proposal received,
2. Review Research Approved Budget,
3. Grant or deny every proposal permission, where the end choice should be made by all
the research committee members.
4. And Obtain approval of Research Permission Grant Draft from Every related member
of research committee.
Research Permission Grant Activities deliverables is Form R4. Research Permission Grant.
2.4.5 Research Execution and Control Activities
Research Execution and Control Procedure is as in Fig 6. Research Specialist and Research
Coordinator are in charge of execution of every research plan.
C
o
m
m
u
n
i
t
y
D
e
v
e
l
o
p
m
e
n
t
O
f
f
i
c
e
r
R
e
s
e
a
r
c
h
S
p
e
c
i
a
l
i
s
t
a
n
d
C
o
o
r
d
i
n
a
t
o
r
R
e
s
e
a
r
c
h
C
o
o
r
d
i
n
a
t
o
r
Fig. 6. Research Execution and Control Procedure Standard.
Research Execution and Control critical success factor is:
1. The research proposal is reviewed,
2. Every research prerequisite is satisfied,
3. Every phases described in research methodology is committed,
4. Every milestones / deliverables needed is made, At minimum, it consist of: Research
Report, Solutions and its Manual or Training Materials, Research Journal in English
and Indonesian Language, Business Journal in English and Indonesian Language,
Script, Thesis, or Dissertation, if available, and
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
365
5. Technology Development Manager already approves the research report draft.
Research Execution and Control Activities activities are
1. Review the proposal,
2. Satisfy every research prerequisite,
3. Ensure that every phases described in research methodology is committed,
4. ensure that every milestone / deliverables needed is made, and
5. Obtain approval of Research Report Draft from Technology Development Manager.
Research Execution and Control Activities deliverables is Form R5. Research Execution and
Control.
2.4.6 Student Research Advertisement Activities
Student Research Advertisement Procedure is as in Fig 7. Student is drafted based on
research plan.
Fig. 7. Student Research Advertisement Procedure Standard.
Student Research Advertisement Activities critical success factor is
6. All Thesis Student in University and Information Technology Directorate recognize the
program,
7. Problems emerged and potential remedies are identified, and
8. Technology Development Manager already approves the Student Research
Advertisement report draft.
Student Research Advertisement Activities activities is
1. Run the Thesis Student Briefing and report the realization,
2. Identify Problems emerged and its potential remedies, and
3. Obtain approval of Student Research Advertisement Report Draft from Technology
Development Manager.
Student Research Advertisement Activities deliverables is Form R6. Student Research
Advertisement Report.
Quality Assurance and Management
366
2.4.7 Student Research Proposal and Budgeting Activities
Student Research Proposal and Budgeting Procedure are as in Fig 8. Research Coordinator is
gathering every student research proposal.
Fig. 8. Student Research Proposal and Budgeting Procedure Standard.
Student Research Proposal and Budgeting Activities critical success factor is
1. Every proposal received is reviewed, The following budget is calculated: Man Power
demand, Tools / Machine budget, Research object budget, Research operational
budget, and Literature budget, and
2. Every related research specialist and coordinator already approves the student research
budget plan draft.
Student Research Proposal and Budgeting Planning Activities activities are
1. Review every research proposal, Calculate: Man Power demand, Tools / Machine
budget, Research object budget, Research operational budget, and Literature budget,
and
2. Obtain approval of Research Budget Plan Draft from Every related research specialist
and coordinator.
Student Research Proposal and Budgeting Planning Activities deliverables is Form R7A.
Student Research Budget and Form R7B. Student Research Proposal.
2.4.8 Student Research Execution and Control Activities
Student Research Execution and Control Procedure are as in Fig 9. Research Specialist
handle day to day control of Thesis Student.
Student Research Execution and Control critical success factor is
1. The research proposal is reviewed,
2. Every research prerequisite is satisfied,
3. Every phases described in research methodology is committed, Every milestones /
deliverables needed is made, At minimum, it consist of: Research Report, Solutions and
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
367
its Manual or Training Materials, Research Journal in English and Indonesian
Language, Business Journal in English and Indonesian Language, and Script, Thesis, or
Dissertation, if available, and
4. Technology Development Manager already approves the student research report draft.
Fig. 9. Student Research Execution and Control Procedure Standard.
Student Research Execution and Control Activities activities are
1. Review the proposal, Satisfy every research prerequisite, Ensure that every phases
described in research methodology is committed, ensure that every milestone /
deliverables needed is made, and
2. Obtain approval of Student Research Report Draft from Technology Development
Manager.
Student Research Execution and Control Activities deliverables is Form R8. Student
Research Execution and Control.
2.4.9 Research Evaluation Activities
Research Evaluation Procedure is as in Fig 10. Research Committee is to evaluate
deliverables of every research done.
Fig. 10. Research Evaluation Procedure Standard.
Quality Assurance and Management
368
Research Evaluation Activities critical success factor is
1. every finished research is reviewed, every research and student research report is
reviewed, every research phases described in research methodology is committed,
every research milestones / deliverables needed is made, and
2. Every member of research committee already approves the researcher performance
report draft.
Research Evaluation Activities activities is
1. Review every finished research, Review every research and student research report,
and
2. Obtain approval of Researcher Performance Report Draft from every member of
Research Committee.
Research Evaluation Activities deliverables is Form R9. Researcher Performance Report.
2.4.10 Research Training Schedule Commission Activities
Research Training Schedule Commission Procedure is as in Fig 11. Researcher attendance in
training must be documented.
Fig. 11. Research Training Schedule Commission Procedure Standard.
Research Training Schedule Commission Activities critical success factor is
1. Every Research Training Attendance List Report is reviewed, and
2. Technology Development Manager already approves the research training schedule
commission activities report draft.
Research Training Schedule Commission Activities activities is
1. Review every Research Attendance List Report, and
2. Obtain approval of Research Training Schedule Commission Report Draft from
Technology Development Manager.
Research Training Schedule Commission Activities deliverables is Form R10. Research
Training Schedule Commission Report.
2.4.11 Research Schedule Commission Activities
Research Schedule Commission Procedure is as in Fig 12. Researcher attendance in research
lab must be documented.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
369
Fig. 12. Research Schedule Commission Procedure Standard.
Research Schedule Commission Activities critical success factor is
1. Every Research Attendance List Report is reviewed, and
2. Technology Development Manager already approves the research schedule commission
activities report draft.
Research Schedule Commission Activities activities is
1. Review every Research Attendance List Report, and
2. Obtain approval of Research Schedule Commission Report Draft from Technology
Development Manager.
Research Schedule Commission Activities deliverables is Form R11. Research Schedule
Commission Report.
2.4.12 Monthly Research Specialist Monitoring Activities
Monthly Research Specialist Monitoring Procedure is as in Fig 13. Research Specialist is
ought to report to Research Coordinator Monthly.
Fig. 13. Monthly Research Specialist Monitoring Procedure Standard.
Monthly Research Specialist Monitoring Activities critical success factor is
1. Every Plan for meeting is scheduled, in every meeting, every intended information
from every owner is captured, and
Quality Assurance and Management
370
2. Technology Development Manager already approves the Monthly Research Specialist
monitoring report draft.
Monthly Research Specialist Monitoring Activities activities are
1. Schedule every Meeting, in every meeting, the intended information from every owner
must be captured an documented, and
2. Obtain approval of Monthly Research Specialist Monitoring Report Draft from
Technology Development Manager.
Monthly Research Specialist Monitoring Activities deliverables is Form R12. Monthly
Research Specialist Monitoring Report.
2.4.13 Monthly Research Student Monitoring Activities
Monthly Research Student Monitoring Procedure is as in Fig 14. Research Student is ought
to report to Research Coordinator Monthly.
Fig. 14. Monthly Research Student Monitoring Procedure Standard.
Monthly Research Student Monitoring Activities critical success factor is
1. Every Plan for meeting is scheduled, in every meeting, every intended information
from every owner is captured, and
2. Technology Development Manager already approves the Monthly Research Student
monitoring report draft.
Monthly Research Student Monitoring Activities activities are
1. Schedule every Meeting, in every meeting,
2. the intended information from every owner must be captured an documented, and
3. Obtain approval of Monthly Research Student Monitoring Report Draft from
Technology Development Manager.
Monthly Research Student Monitoring Activities deliverables is Form R13. Monthly
Research Student Monitoring Report.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
371
2.4.14 Weekly Research Student Monitoring Activities
Weekly Research Student Monitoring Procedure is as in Fig 15. Research Student is ought to
report to Research Coordinator Monthly.
Fig. 15. Weekly Research Student Monitoring Procedure Standard.
Weekly Research Student Monitoring Activities critical success factor is
1. Every Plan for meeting is scheduled, in every meeting,
2. every intended information from every owner is captured, and
3. Technology Development Manager already approves the Weekly Research Student
monitoring report draft.
Weekly Research Student Monitoring Activities activities are
1. Schedule every Meeting, in every meeting,
2. the intended information from every owner must be captured an documented, and
3. Obtain approval of Weekly Research Student Monitoring Report Draft from Technology
Development Manager.
Weekly Research Student Monitoring Activities deliverables is Form R14. Weekly Research
Student Monitoring Report.
2.4.15 Researcher Reward Activities
Researcher Reward Procedure is as in Fig 16. System shall pay every researcher based on
their achievement in research.
Researcher Reward Activities critical success factor is
1. Every Researcher Evaluation Report is reviewed,
2. Ensure that all work done is within budget,
3. Technology Development Manager already approves the researcher reward report
draft,
4. Reward and Level Advancement is granted to the deserved Researcher, and
5. Budget Balance is updated.
Quality Assurance and Management
372
Fig. 16. Researcher Reward Procedure Standard.
Researcher Reward Activities activities is
1. Review every Researcher Evaluation Report,
2. Review available budget,
3. Obtain approval of Researcher Reward Report Draft from Technology Development
Manager,
4. Pay every Researcher Reward, and
5. Update Budget Balance.
Researcher Reward Activities deliverables is Form R15. Researcher Reward Report
2.4.16 Researcher Punishment Activities
Researcher Punishment Procedure is as in Fig 17. System shall punish every researcher
based on their achievement in research.
Fig. 17. Researcher Punishment Procedure Standard.
Researcher Punishment Activities critical success factor is
1. Every Researcher status is reviewed,
2. Every Researcher Evaluation Report is reviewed,
3. Verify Researcher misconduct to themselves, related Research Specialist, Research
Coordinator, or other related person / group,
4. Ensure that the Researcher is deserved to be punished, If the misconduct is made not by
them, they did not deserve to be punished,
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
373
5. Technology Development Manager already approves the Researcher punishment report
draft, and
6. Punishment is mandated to the deserved Researcher.
Researcher Punishment Activities activities is
1. Review every Researcher status,
2. Review every Researcher Evaluation Report,
3. Verify Researcher misconduct to themselves, related Research Specialist, Research
Coordinator, or other related person / group,
4. Obtain approval of Researcher Punishment Report Draft from Technology
Development Manager, and
5. Punish the Researcher
Researcher Punishment Activities deliverables is Form R16. Researcher Punishment Report.
2.5 System implementation test
The CVR / IT system adoption rate is calculated using simple equation, how much activities
mandated from CVR / IT already implemented on current system.
3. Result
The CVR / IT system adoption rate is as in Table 2. Furthermore, the system adoption status
is in Table 3.
Activities Adoption Status
Assign an initiating Project Manager O
Identify the Project Sponsor O
Define the Business Need/Opportunity O
Identify Business Objectives and Benefits O
Define Overall Scope O
Define Project Objectives O
Identify Project Constraints and Assumptions O
Ensure Alignment with Strategic Direction and Architecture O, but using IT
Directorate Research Tree
Identify and Engage Key Stakeholders O
Identify Key Potential Risks O, using simple test
Procurement and Resourcing Requirements O, handled by Binus
Procurement
Determine Cost/Benefit and Schedule Estimates O
Develop a Project Phase Exit Plan O
Assign a Project Manager O
Refine Project Scope O
Determine Procurement and Sourcing Strategy
Refine Project Schedule
Resource Planning O
Identify Other Resource Requirements O
Establish Project Life-Cycle Phase Checkpoints O, based on project
Quality Assurance and Management
374
Activities Adoption Status
Refine Project Cost Estimate and Budget O
Identify Potential Project Risks
Determine Process for Issue Identification and Resolution
Develop a Change Management Process
Develop an Organizational Change Management Approach
Develop a Quality Management Approach O
Develop A Project Communication Approach
Develop A Configuration Management (CM) Approach
Project Performance Commitment
Consolidate the Project Plan
Detailed Designs O
Establish a Requirements Traceability Matrix
Manage scope, cost, schedule and quality (Manage Change)
Manage issues, change and risk
Establish and report project status O
Update Project Performance Commitment document
Obtain approval from the Governance Body at Design Review O
Manage Risk
Communicate Information O
Manage Schedule
Document the Work Results
Manage Organizational Change
Manage Scope O
Manage Quality O
Manage Costs O
Manage Issues
Conduct Status Review Meetings
Review Project Life-Cycle Phases Checkpoints
Execute the Procurement Plan
Administer Contract/Vendor
Update Project Planning Documents O
Build & Test O
Implementation O
Conduct Rollout Acceptance Meeting O
Conduct Final Contract Review O
Conduct Lessons Learned Meeting O, but problem with
documentation
Conduct Knowledge Transfer
Post Project Review O, with problem with
different POV
Distribution of Resources O
Celebration O
Table 4. CVR / IT adoption current status.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
375
Activities Adoption Status
Research Communication Activities O
Research Monitoring Activities O
Research Proposal and Budgeting Activities O
Research Budget Sounding Activities O
Research Permission Grant Activities O
Research Execution and Control Activities O
Student Research Advertisement Activities O
Student Research Proposal and Budgeting Activities O
Student Research Execution and Control Activities O, with problem with different
POV
Research Evaluation Activities O, with problem with different
POV
Research Training Schedule Commission Activities O
Research Schedule Commission Activities O
Monthly Research Specialist Monitoring Activities O
Monthly Research Student Monitoring Activities O
Weekly Research Student Monitoring Activities O
Researcher Reward Activities O
Table 5. System adoption status.
There are about 54 Internship Researcher in IT Directorate until this paper is written,
compared to 120 Internship Researcher needed. Their Research Speed is on par with ITD
Standard. IT Directorate currently can only handle around 15 researches. All of them yields
system adoption rate to around 40 %.
4. Discussion
Low adoption rate is come from several traits, based on post research observation. There
some traits in Binus student, that they seldom documenting their problem, but they like to
documenting their achievement in their research, so Research Specialist sometimes late in
recognizing problems in research.
The IT Directorate research program still unpopular in student body, due to fear to fail in
research. Further research is needed to alleviate this problem.
Quality Assurance and Management
376
Preservation of Research tree is still uncommon in Binus University by the time this paper is
written. IT Directorate must establish its own research tree, based on Research Directorate
inputs.
Different Point of View (POV) between IT Directorate and IT Department does ignite
problem, mostly in how the project conducted and roll out of project. Some monitoring and
documentation activities and rules cannot be done due conflict with IT Department rules.
To alleviate these problems, writer suggested to start from changing student paradigm, start
from early semesters. The class should be shaped to expose student to project development
culture, where they learn to address real world problem, came up with solution, and
essentially, to work together and to track progress, because most project fail in the last two
items.
Several alternative solutions can be made. First is to encourage project based activities on
class. Although this model can be considered artificial, at least that could train student
responsibility on keeping with documentation and schedule.
Second is, to bridge the class to real life industries. The first variant is to get industrial
agreement to be the sand box for class project. The second variant is to us real life project as
either the complement or substitute of relevant credit.
The third one is, to actually shape the class as a software factory, where student
accomplishment measured by task and project based style. The project should come from
out school. Another variant of this model is to consider the whole university as a software
factory, where the upper classes act as analyst and managers, and lower classes as
programmers.
Only when student understand the project environment and the consequences behind it, the
CVR / IT adoption rate (or, any project management standard in general) shall rise.
5. Conclusion
Based on observation, the system adoption rate is 40 % at most. Further activity is needed to
raise the value to 100 %, addressing how to reduce fear in student, and how to manage
research documentation and monitoring.
Solution made should aim to introduce and raise student awareness to project management
environment o early semesters.
6. Acknowledgement
The author would like to thank Mr. Gintoro FX, this system is based on his idea to expand
current associate member system to accommodate IT Directorate needs. This work will not
taken place to begin with if without his idea.
The author would like to Thanks Mr. Eddy Santosa Jaya, Head of Information Technology
Directorate, and everyone within the directorate to support the program adoption and let
the study takes place.
Implementation of CVR / IT Methodology on Outsourced Applied Research to
Internship Environment, Case, Information Technology Directorate of Bina Nusantara Foundation
377
7. References
CVR/IT Consulting LLC. (2002). The Project Management Template Library. Retrieved
January 12, 2009, from CVR/IT Consulting:
http://www.cvr-it.com/PM_Templates/
Alba, E., & Chicano, J. F. (2006, December 24). Software project management with GAs.
Retrieved January 3, 2009, from KUEC:
http://kuec.sci.ku.ac.th/KM/418571/SW%20Engineer/SWProjMangwGA.pdf
Boehm, B. W., & Ross, R. (1989). Theory-W Software Project Management: Principles and
Examples. Retrieved February 28, 2009, from CiteSeerX beta:
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.105.2928&rep=rep1&t
ype=pdf
Callahan, J., & Ramakrishnan, S. (2007). Software Project Management and Measurement
on the World-Wide-Web (WWW). Retrieved January 26, 2009, from CiteSeerX
beta:
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.30.2191&rep=rep1&ty
pe=pdf
Goebel III, J. C. (2003). Extreme Programming Practices Used to Facilitate Effective Project
Management. Retrieved January 13, 2009, from Menlo Innovations:
http://www.menloinnovations.com/freestuff/whitepapers/Project%20Managem
ent.pdf
Jalote, P. (2007). Knowledge Infrastructure for Project Management. Retrieved January 12, 2009,
from CiteSeerX beta:
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.96.7171&rep=rep1&ty
pe=pdf
Liu, X., Kane, G., & Bambroo, M. (2003). An Intelligent Early Warning System for Software
Quality Improvement and Project Management. Retrieved january 12, 2009, from
Scholars' Mine:
http://scholarsmine.mst.edu/post_prints/pdf/01250167_09007dcc8030d05e.pdf
Paul, R. A., Kunii, T. L., Shinagawa, Y., & Khan, M. F. (1998, September 21). Software
Metrics Knowledge and Databases for Project Management. Retrieved January 12,
2009, from College of Engineering: http://cobweb.ecn.purdue.edu/~ee461/Paul-
Metrics.pdf
Quantitative Software Management Associates. (2004). Slim Suite Tools for Software
Management. Retrieved January 23, 2009, from Quantitative Software Management
Associates: http://www.qsma.com/docs/SLIMSuite6.0.pdf
Reid, K. L., & Wilson, G. V. (2007). DrProject: A Software Project Management Portal to Meet
Educational Needs. Retrieved January 21, 2009, from ACM Portal:
http://portal.acm.org/citation.cfm?id=1227421&dl=GUIDE&coll=GUIDE&CFID=
79879641&CFTOKEN=91755329
Sukhoo, A., Bernard, A., Eloff, M. M., Poll, V. d., & A., J. (2008). Accommodating Soft Skills
in Software Project Management. Retrieved January 12, 2009, from Informing
Science Institute:
http://informingscience.org/proceedings/InSITE2005/I55f42Sukh.pdf
Quality Assurance and Management
378
True, M. (2007). Starting and Maintaining a Quality Internship Program. Retrieved January 21,
2009, from Messiah College:
http://home.messiah.edu/~mtrue/documents/Starting_And_Maintaining_A_Qu
ality_Internship_Program.pdf
20
Improving Quality Assurance
in Automation Systems
Development Projects
Dietmar Winkler and Stefan Biffl
Christian Doppler Laboratory
Software Engineering Integration for Flexible Automation Systems (CDL-Flex),
Institute of Software Technology and Interactive Systems,
Vienna University of Technology,
Austria
1. Introduction
Development processes of large-scale automation systems, e.g., power plants and
manufacturing systems involve engineers from various disciplines, e.g., mechanical,
electrical, and software engineers, who have to collaborate to enable the construction of
high-quality systems (Biffl et al., 2009a). Engineers in individual disciplines apply domain-
specific tools, methods, and data models, which are typically not seamlessly linked to each
other. For instance, electrical engineers use circuit diagrams and technical data sheets to
model the electrical behaviour of the systems, process engineers focus on process workflows
for the instrumentation of the system, and software engineers use software models to
develop and test control applications of the system (Hametner et al., 2011).
Because of the heterogeneity of individual disciplines and the missing links between them,
project management (e.g., project observation and control) and quality assurance (QA)
activities across disciplines become even more difficult. Nevertheless, a comprehensive view
on the project, frequent synchronization of systems engineering artefacts between
disciplines, and QA activities are success-critical factors for developing large-scale
automation systems.
Observations at our industry partner, a hydro power plant systems integrator, showed that
these overlapping project activities (i.e., project management and QA) are currently not
supported sufficiently (Sunindyo et al., 2010)(Winkler et al., 2011). In typical industry
projects in a distributed and heterogeneous environment synchronization between
disciplines and QA activities across disciplines are conducted manually and require high
effort by experts, who have to overcome media breaks between the outcomes of different
tools and data models. In addition, we observed strong limitations of QA activities which
leave important and critical defects unidentified. To support systems development activities
in heterogeneous environments for project management (PM) and QA, we identified three
main challenges:
Quality Assurance and Management
380
Project and Process Management. Heterogeneity of tools and data models requires time-
consuming activities to assess the current project state across all involved disciplines.
Because of a lack of tool support experts have to collect and analyze data manually.
Therefore, the current project state based on real data and facts derived from manual
project analysis is available very infrequently and on request only. Nevertheless,
continuous analysis of engineering projects and the availability of project status reports
are key requirements of project managers to (a) enable a comprehensive view on the
overall project state(s) and (b) control the course of events based on the analysis results
more effectively and efficiently (Moser et al., 2011).
Change Management. Decoupled disciplines and workflows make engineering processes
and change management processes more difficult, in particular, if heterogeneous
disciplines are involved. For instance, changing a hardware sensor (e.g., an oil pressure
sensor) from a digital to an analogue device (executed by the electrical engineer) affects
process engineers (required changes in hardware wiring), and software engineers
(required change of software variables according to value ranges and data types).
Therefore, a second key requirement is to improve collaboration and interaction
between engineers (coming from various disciplines) with respect to propagating
critical changes to affected disciplines in a controlled way within a short time interval
(Winkler et al., 2011).
Quality Assurance. Typically engineers apply isolated QA approaches recommended by
standards and industry best practices to assess and improve product quality with a
focus on their individual application domain. For instance, electrical engineers apply
simulation approaches of wiring and electrical signals (Sage et al., 2009) and software
engineers conduct reviews (Sommerville, 2007), inspections (Laitenberger et al., 2000),
and testing approaches (Meyers et al., 2004) to identify defects in the artefacts efficiently
and effectively. Isolated QA methods focus on an individual discipline and are well-
established. Nevertheless, we observed strong limitations regarding QA activities
across disciplines and tool borders. New mechanisms are required to support QA
across disciplines. Therefore, the third key challenge focuses on enabling and
supporting QA in heterogeneous engineering environments across disciplines and
domain borders.
Common to all three challenges/requirements is the need to linking heterogeneous
environments to support synchronization and QA across disciplines and tool borders.
Figure 1 illustrates these challenges on the semantic level. Three basic roles (see Figure 1;
positions 1a 1c), i.e., electrical, process, and software engineers work within their
disciplines using specific tools and methods including best-practice QA approaches.
Nevertheless, there is a strong need to synchronize artefacts and disciplines (represented by
the overlapping areas in Figure 1), which could address specific risks and quality issues.
Observations at our industry partner confirmed that QA activities with focus on the
overlapping areas of two or more (heterogeneous) disciplines are not sufficiently addressed
yet (see Figure 1; position 2) (Biffl et al., 2011).
Common practices for synchronizing different disciplines focus on these overlapping areas,
where experts have to discuss and exchange data to bridge these technical and semantic
gaps manually (Biffl et al., 2009b). Therefore, we see the need to support this
synchronization process by providing inspection and testing approaches with focus on these
Improving Quality Assurance in Automation Systems Development Projects
381
overlapping areas to improve QA activities by means of increasing product quality and
decreasing effort and error-proneness (caused by the manual synchronization process). Note
that the goal of synchronizing individual disciplines is to focus on the overlapping areas,
leaving discipline-specific data within their assigned tools. In this chapter we present an
approach for identifying these common concepts as foundation for addressing these
overlapping areas and show benefits for QA activities, i.e., defect detection across
disciplines and project observation and control.
Fig. 1. Risks and Quality Issues in overlapping areas in heterogeneous engineering
environments (Biffl et al., 2011).
The reminder of this chapter is structured as follows: Section 2 provides an overview on the
related work and Section 3 highlights the research issues. Section 4 describes the basic
concepts of the Automation Service Bus (ASB) and Section 5 presents a pilot application for
improving QA aspects based on the ASB. Finally, Section 6 summarizes, concludes and
identifies future work.
2. Related work
This section summarizes related work of automation systems development processes and
software QA as lessons learned from business IT software development for application in
large-scale automation systems engineering projects.
2.1 Automation Systems development processes
Automations Systems (AS), such as power plants and industrial automation systems for
manufacturing purposes, include distributed software components to control systems
behavior (Biffl et al., 2009b). Increasing complexity of software products require well-defined
processes and methods for software and systems construction and verification and
validation. Various software and systems engineering processes support engineers by
Quality Assurance and Management
382
providing sequences of steps for project planning and control, e.g., GAMP (Gamp, 2008),
W-Modell (Baker et al., 2008), eXtreme Programming (Beck et al., 2004), Scrum (Schwaber,
2004), and V-Modell XT
1
. Nevertheless, process standards focus on the organizational
structure of software and systems engineering projects with limitations on method support,
tooling and synchronizing various and heterogeneous disciplines.
Observations at our industry partner showed a basic sequential engineering process in
Automation Systems Engineering (ASE) development projects (see Figure 2 for details). The
observed system development process includes a set of sequential steps including isolated
(discipline-specific) QA activities conducted by experts or groups of experts in the
individual domain. Because of the sequential process structure, changes from late phases of
development (e.g., during test and/or commissioning) can have a major impact on previous
phases of the project and can lead to project delays in case of critical changes. Note that
these effects are common to sequential and waterfall-like development processes in
homogeneous engineering environments (Sommerville, 2007).
Fig. 2. Sequential Engineering Process with isolated Quality Assurance (QA) Activities.
Considering AS development projects, where experts work distributed in heterogeneous
environments, effects of late changes are more critical, more risky, and error prone.
Engineers from individual disciplines work concurrently during the development project.
Therefore, frequent synchronization between these disciplines is a success-critical issue
during development and change request handling (see Figure 3a). For instance, a wrong
alarm indicator of an oil pressure sensor in the control center (identified during test and/or
commissioning) might affect software engineers (because data handling could have been
implemented incorrectly), electrical engineers (wrong alarm sensor type used or incorrectly
wired) or the process engineer (incorrect sensor planned). This kind of defects might remain
undetached if not tested appropriately. If such a defect is uncovered, there is a need for
analyzing the defect and the origin of the defect (across all involved disciplines). A weak
link between different disciplines will hinder efficient analysis of defects across disciplines
1
For a description of the V-Modell XT see http://www.v-modell-xt.de
Improving Quality Assurance in Automation Systems Development Projects
383
and could lead to quality problems and project delays. Please note that this analysis steps
are typically conducted by experts who are familiar with at least two involved disciplines.
Figure 3a presents a basic synchronization step applicable in every phase of the sequential
process workflow. Technical integration of tools and semantic integration of data models
could help supporting synchronization across disciplines and tool borders (see Figure 3b).
Fig. 3. Synchronization of heterogeneous disciplines with QA (Winkler et al., 2011).
In current industry projects this synchronization step is conducted manually by experts.
Expert knowledge is embodied in domain-specific standards, terminologies, people,
processes, methods, models, and tools (Moser et al., 2010b). Note that these standards
typically do not support technical and semantic integration of tools and data models across
disciplines. Assuming that technical and semantic gaps between different engineering
experts lead to a lack of QA of artefacts and inefficient change management approaches
(Schfer et al., 2007), a major challenge is to bridge the gap between heterogeneous
disciplines on a technical and semantic level to enable efficient change management, quality
assurance, and data collection for project monitoring and control during development,
commissioning, and maintenance.
Technical and semantic integration of tools and data models across disciplines enables
frequent synchronization and data exchange, supports efficient change management
processes, and enables more effective and efficient QA. In addition, processes across
disciplines and tools borders become observable and as a consequence enable effective
and efficient project management (PM), project monitoring, and control. Figure 3b illustrates
the basic contribution of the ASB approach for technical integration of tools and semantic
integration of data models to support PM and QA more effectively and efficiently.
2.2 Quality Assurance aspects for Automation Systems development
Quality Assurance (QA) embedded within isolated disciplines is supported by
appropriate methods and tools (Schulmeyer, 2008). Nevertheless, a key challenge is to
conduct QA activities across domain and tool borders. Based on Software Engineering Best
Practices
2
(Schatten et al., 2010) specific methods from business IT software development,
e.g., inspection and testing, are promising approaches for application in AS development
projects.
2
See http://bpse.ifs.tuwien.ac.at for additional material related to the book in English language.
Quality Assurance and Management
384
2.2.1 Reviews and software inspection
Reviews and (more formal) software inspections are common and well-established QA
methods in business IT software engineering to discover candidate issues and defects
systematically. Depending on the configuration of the inspection process (Laitenberger et al.,
2000), software inspections are applicable to various types of artefacts, e.g., written text
documents, models, drawings, and code. In addition, inspections are applicable in all stages
of software and systems development. See (Kollanus et al., 2007) for an overview on
software inspection research and (Winkler, 2008) for an empirical evaluation of selected
inspection variants.
Individual inspectors form an inspection team and apply a defined sequence of steps
(inspection process) to identify defects (a) individually and (b) in teams (Biffl et al., 2003).
Based on individual inspection results, an aggregated team defect list is generated in an
inspection team meeting based on interaction and discussions. Depending on the project
scope and the problem domain, reading techniques support inspectors and inspection teams
to focus on a certain type of defects and defect classes. Basically, reading techniques are
structured approaches for reading the document under investigation systematically (Basili,
1997)(Biffl, 2001). Example reading techniques are checklist-based reading (inspectors apply a
pre-defined and/or customized checklist), perspective-based reading (based on different
perspectives and disciplines), and usage-based reading (use cases and scenarios represent the
guidelines for defect detection and drive the inspection process)(Winkler, 2008). Assuming
that different perspectives will lead to different defects and defect classes, perspective-based
reading techniques focus on defect detection from different viewpoints on the artefact under
inspection. For instance, the tester view might lead to defects regarding testability of
requirements (e.g., based on the completeness of use cases), the developers might focus on a
fully specified design and architecture (e.g., ability to implement requirements), and the
user view might focus on end-user requirements (e.g., software solutions that must be
usable in the customer domain). Usage-based reading focuses on business cases (typically
described as use cases) and the value contribution of the software solution within the
business domain. Therefore, this reading technique approach focuses on the most important
use cases with the most valuable outcome of the software solution (e.g., based on prioritized
use cases).
Analyzing the state-of-the practice at our industry partner, we identified software inspection
as a candidate method for improving product quality in ASE projects. Experts analyzed
overlapping areas during the synchronization process phase to identify defects in a rather
unsystematic and informal way. Software inspections techniques and reading techniques
(e.g., perspective based reading) can help engineers in better focusing on a certain type of
defects coming from various disciplines.
2.2.2 Software and systems testing
Traditional software testing approaches focus on executing a program with the intent to
identify defects (Kaner et al., 1999). Nevertheless, the availability of executable code and test
information (e.g., test case specification, test data, and test environments) are pre-conditions
for applying software testing techniques (Meyers et al., 2004). Traditional testing approaches
aligned with some V-Model approach focus on different levels of detail within the overall
Improving Quality Assurance in Automation Systems Development Projects
385
system (see Figure 4): (a) detecting defects on component level (e.g., applying unit tests), (b)
integration tests to verify and validate the design and the architecture on architectural level, and
(c) systems and acceptance test with focus on customer requirements (system level).
Lessons learned from testing business IT software products showed the applicability of
prominent basic testing techniques, i.e., Black-Box and White-Box testing techniques
(Sommerville, 2007), as promising testing approaches on different levels of AS development
projects. The component level focuses on testing and simulation of individual components
located at isolated disciplines. Integration testing of components aligned with the
architecture can be seen as testing across disciplines and domain borders, and acceptance
testing seems to be similar to system testing and commissioning at the customers site. Figure
4 illustrates the different levels of testing AS project artefacts. Note that test cases and test
scenarios can be defined early, following the Test-Driven (Beck et al., 2004) or Test-First
(Winkler et al., 2009) approach based on agile software development, another Best-Practice
learned from Business IT software development.
Fig. 4. Test levels in automation systems development according to the W-model (Baker et
al., 2008)(Winkler et al., 2009).
In context of AS Black-Box can refer to the interfaces between various disciplines, e.g., wired
connections at a control unit or interface to a software visualization component. Testing
these interfaces refers to some kind of Black-Box Testing. The commissioning phase
(comparable to system tests at the customer site), including all hardware and software
components of the power plant or manufacturing system, is one of the most critical phases
related to QA in the AS domain. Isolated subsystems are launched step by step with real
hardware and software. Our observations at industry projects showed that defects found
during this phase have to be detected manually by analyzing paper work (e.g., drawings)
and hardware/software components. Therefore, the commissioning phase requires a very
high effort by experts.
The ASB concept aims at supporting QA by enabling testing across domain borders, i.e.,
testing the overall system from (hardware) sensor to (software) variables, comparable to an
integration test well-known from testing business IT software products.
Quality Assurance and Management
386
3. Research questions
Heterogeneous engineering environments suffer from weak or missing links between
individual disciplines, e.g., mechanical, electrical, and software engineers, on technical and
semantic level. Missing links between disciplines hinder efficient collaboration between
engineers and makes PM (project observation and control), change management, and
comprehensive QA more difficult, risky, and error-prone. Based on observations at our
industry partners and related work, we derived the following set of research questions to
improve collaboration, project and change management, and QA in heterogeneous
environments across disciplines and engineering domains.
Research Question 1 (RQ1). How can we link various disciplines on a technical and semantic level
to enable efficient data exchange in heterogeneous ASE environments? Efficient data exchange is a
pre-condition for effective and efficient PM, change management, and QA. Figure 1
presented the need for collaboration regarding the overlapping areas of individual
disciplines, where experts have to synchronize data (from various disciplines) manually.
The first research question focuses on eliciting the common concepts, i.e., data represented
in the common and overlapping areas, of related disciplines.
Research Question 2 (RQ2). How can we support QA across disciplines in heterogeneous
environments? Quality assurance aspects can focus on identifying defects in engineering
artefacts and overlapping areas of different artefacts coming from various disciplines in a
heterogeneous environment. Observations at industry projects showed that these QA
activities require a high manual effort provided by experts. We expect a significant
improvement (in terms of reducing effort and increasing quality by means of identifying
defects more effective and efficient) of QA performance. Therefore, the second research
question focuses on providing mechanism to support defect detection in these overlapping
areas.
Research Question 3 (RQ3). How can we support project and quality managers in collecting and
analyzing project data (from heterogeneous sources) more effective and efficient to enable continuous
project monitoring and control? Observations at industry projects revealed a high manual
effort for collecting and analyzing data from different sources. Because of this high effort
(conducted by experts) the project state is captured less frequent and hinder efficient and
effective PM. The third research question focuses on providing a window to engineering
data across disciplines and domain borders to provide engineering project data tool-
supported, frequently and fast.
4. Automation Service Bus for automation systems engineering projects
This section describes the basic concept of the Automation Service Bus (ASB) as a
foundation for enabling tool-supported QA activities in heterogeneous environments across
disciplines and tool borders (Biffl et al., 2011).
Isolated disciplines apply individual data models and tools with limitations regarding
collaboration and interaction (see Figure 1). In industry projects experts bridge the gap
between these data models from heterogeneous sources manually. To overcome high effort
for manual synchronization and improve the quality of manual activities the Automation
Improving Quality Assurance in Automation Systems Development Projects
387
Service Bus (ASB) provides an tool-supported approach to link heterogeneous sources (e.g.,
data models, data formats, and tools) for PM and QA (Biffl et al., 2009b). In contrast to
existing solutions, e.g., Comos PT
3
or EPlan Engineering Center
4
, the ASB concept provides
a flexible and light-weight infrastructure based on the Enterprise Service Bus (Chappell et
al., 2004) concept.
Flexibility refers to the concept to respond to changed environments (e.g., introduction of
new/modified tools and data models) easily and light-weight refers to reducing the effort
for synchronizing different disciplines by focusing on a subset of data (common concepts)
similar for all related disciplines. Note that data synchronization can be limited to these
common data without considering additional domain-specific data (not relevant for
synchronization). These common concepts are represented by a virtual common data model
(VCDM) (Biffl et al., 2011).
Fig. 5. Schematic overview on the virtual common data model (Biffl et al., 2011).
Basically the VCDM aims at bridging this gap between heterogeneous sources. Figure 5
illustrates the VCDM and the relationship of two different tools from two different
disciplines by example. Electrical engineers use tools for designing an electrical plan using
defined tool data and attributes located within the (isolated) tool domain (1). On the other
hand side, a software engineer (5) use specific tools for designing function plans, a common
representation for the development of control applications. Both experts have to agree on a
common language (the VCDM) to exchange data efficiently. In the AS domain, e.g., power
plants, we observed signals as common concepts between different domains (Winkler et al.,
2011). For instance, a signal is represented as a voltage level of an electrical device (by the
electrical engineer) and as a software variable (by the software engineer). Additional
common information, e.g., hardware addresses and signal description, is used by both
disciplines. The agreement of the VCDM results in a mapping table for translation purposes.
Note that a transformation is required to map the VCDM to the individual tool data models
(see (2) for the electrical plan transformer and (4) for the software model transformer).
Finally, signal lists are passed from individual tools via transformer to the engineering data
base (EDB) (3) holding the common data based on the VCDM. Therefore, signals and related
3
Comos PT: http://www.automation.siemens.com
4
EPlan Engineering Center: http://www.eplan.de/
Quality Assurance and Management
388
common signal-specific information are used as foundation for efficient data exchange in AS
development projects at our industry partner.
Note that this concept (a) enables interaction between related disciplines (and tools) via the
VCDM and the EDB and (b) represents the foundation for PM and QA in the overlapping
areas in heterogeneous environments.
5. Pilot application for Quality Assurance support in ASE Projects
This section provides a critical use case, i.e., signal change management (Winkler et al.,
2011), and highlights the results of a prototype implementation at our industry partner, a
large hydro power plant systems integrator.
5.1 Use case: Signal change/deletion management with warning
The analysis of typical projects at our industry partner showed that an overall number of
around 40,000 signal engineering objects are spread across several disciplines in a
distributed and heterogeneous environment. Up to now manual synchronization processes
were executed infrequently; as a consequence continuous PM and comprehensive QA
become difficult and challenging.
Therefore, there is a strong need for synchronizing individual (discipline specific) signal
lists more frequently to enable (a) efficient PM and (b) efficient QA across these
disciplines. The VCDM enables tool-supported synchronization, efficient interaction, and
data exchange between these disciplines. We identified signal change and signal deletion
management as critical tasks within an engineering project in the AS domain and
designed a basic workflow for signal handling (Moser et al., 2010a). Figure 6a illustrates
the process approach for change management and synchronizing of signal lists
implemented at our industry partner. Signal deletion (i.e., an engineer removes a signal
from the local tool data base) represents a critical issue because if the signal will be
removed automatically, the entire signal and related automation aspects will be removed
in the local data base of the participating engineer after updating the local tool data.
Therefore, we implemented tool-supported notification regarding the removed signal to
enable transparency of the deletion process. Figure 6b presents the extended change
management process for handling deleted signals.
In detail, both processes are implemented as follows:
Signal Change Management (Figure 6a). An electrical engineer modifies an existing
electrical plan (1), e.g., changing the sensor type from a digital to an analogue sensor
type. The local and isolated tool data base holds the modified data. The second step
includes the submission (check-in) of the changed signals via the transformer (2) to the
Engineering Data Base (EDB). Based on the available information in the EDB and the
newly submitted signal list, a difference analysis (3) is conducted automatically
(including separation of new and modified signals). The second engineer (in this
example the software engineer) applies a check-out process (4) and synchronizes with
his own local tool data base. If conducted frequently this concept enables a consistent
data base available for all participating engineers.
Improving Quality Assurance in Automation Systems Development Projects
389
Signal Deletion Handling with Warning (Figure 6b). Locally removed signals are critical for
collaboration in heterogeneous environments if signal deletion is propagated across the
ASB without appropriate notification of related engineers. Note that the removed signal
will disappear in the local data base after a check-out by the corresponding engineer.
Note that a signal is considered to be removed if the signal is stored in the EDB but the
signal is missing in the new/modified signal list during the check-in process. To
overcome this issue, we extended the change management process (Figure 6a) by
adding tool-supported notification (Figure 6b). Similar to the signal change handling
process, an electrical engineer conducts a check-in process (1) and passes the signal list
via Transformer (2) and a difference analysis step (3) to the EDB. The removed signal is
identified
5
(4) and results in an engineering ticket (5) including related information and
contact information, which are passed to related engineers who are affected by the
change/removed signals. Note that information about the involved engineers is stored
in a project configuration. While handling the personalized notification the related
engineers can respond to the engineering ticket and check-out (synchronize) the
modifications if necessary.
Fig. 6. Concept: Signal change (6a) and signal deletion with warning (6b).
5
Note that the current scope of the check-in process, e.g., one or more engineering objects, is a
mandatory pre-condition for assessing whether a signal has been removed or not.
Quality Assurance and Management
390
Based on the VCDM and the signal change/signal deletion management process
synchronization and data exchange between various disciplines and data models can be
executed with tool support. Nevertheless, it remains open, how this concept can support QA
across disciplines.
5.2 Quality Assurance in Automation Systems Engineering projects
In common ASE projects, QA activities, e.g., reviewing signal lists and/or following signal
paths across several engineering documents (e.g., electrical plan, P&ID, software models)
are conducted manually by experts. Because of a high number of signals (up to 40,000
signals in a common hydro power plant), these tasks are time consuming and include
limitations regarding completeness and product quality. Therefore, experts use some
supporting tools, e.g., macro solutions to support difference analyses. Nevertheless, these
temporary solutions are created and used by individual engineers as small supporting tools.
Because of these limitations it is hard to maintain and/or reuse these tools. For instance,
changed environments (e.g., different projects or changed project settings) will typically
require modification of the supporting tools. In addition knowledge transfer to other
engineers, who are not familiar with these tools, becomes difficult.
Focused inspection. A major goal of the ASB concept is to enable experts/engineers
focusing on relevant and critical signals during a check-in process. Therefore, an ASB
solution should be able to provide only relevant changes to the experts (for discussion and
conflict solving) to decrease synchronization effort significantly. Figure 7 illustrates the
focus of the QA in context of synchronizing relevant signals across disciplines.
Fig. 7. Defect detection across disciplines (Biffl et al, 2011).
QA of signal lists includes two aspects: (a) local QA activities conducted by individual
disciplines and tools limited to their application domain (not considered by the ASB
approach) and (b) QA across disciplines in the overlapping areas, where experts have to
synchronize signals and collaborate. Figure 7 illustrates the main aspects: the green marked
Improving Quality Assurance in Automation Systems Development Projects
391
dots represent unchanged and agreed signals; the red marked dots represent
changes/conflicts/removed signals which can result in major issues in related disciplines.
Expert discussions have to focus on these critical changes to identify missing, wrong, or
inconsistent elements (signals) or relationships. In addition the difference analysis highlights
conflicts coming from changes in more than one discipline.
Figure 8 presents the results of the difference analysis after a check-in conducted by an
electrical engineer. Changes are highlighted by providing the old and the modified value.
Experts can use this difference check for synchronizing changes across disciplines and
either accept or reject the change. Note that additional lists with focus on newly
introduced signals, unchanged signals, and removed signals are presented to focus on a
defined set of changes. In addition we introduced a list of invalid signals to present,
whether the new signal list does not confirm to given guidelines regarding data formats
and structure.
Fig. 8. Screenshot: Highlighted changes at a check-in sequence.
The main advantage is that experts can focus on the changes and conduct a focused
inspection from different perspectives, either from the point of view of an electrical
engineer, process engineer, or software engineer (as illustrated in Figure 1). Because of this
tool-supported approach for data exchange, the synchronization process will be conducted
more frequently and can enable the construction of no-surprise systems products.
Note that future work will include a more detailed presentation of signals, including checks
for consistency to enable advanced QA activities (a) within one signal and (b) across a set of
signals. For instance, a check for consistency within one signal can identify missing
information, e.g., a missing hardware address or incompatibility of two or more information
sets; a check for consistency can find duplicate addresses or inconsistencies between similar
signals within one component. Nevertheless, the difference analysis and presentation of
defects will support experts in solving conflicts more effective (completeness) and
efficient (within a shorter time interval).
Integration Testing. A second critical QA approach focuses on an overall consideration of
signals and their connections across disciplines comparable to (software) integration tests -
Quality Assurance and Management
392
which could hardly be found by (focused) inspection. For instance, a sensor is connected to
a switchboard (System Interface) and connected to a Software Variable (Software Interface)
used in a control application (Software Behaviour).
Fig. 9. Automation-supported testing across disciplines (Biffl et al, 2011)
Figure 9 illustrates the related disciplines and interfaces and their connection points (Biffl et
al., 2011). Sample candidate risks and quality issues are: (D1) Sensor data used by a software
variable but without connection to a hardware sensor; (D2) multiple sensors are connected
to one software variable; (D3) correctly wired sensor but no link to a software variable; (D4)
Software variable not connected to a sensor data and sensors.
These types of defects across disciplines could not be found easily during signal check-in. In
addition a manual inspection whether a sensor is wired and connected to the desired
variable is a complex and time-consuming activity. Therefore, tracing of signals across
disciplines is a valuable approach for supporting experts in their field in better identifying
defects. Based on the VCDM (where all signals are available) defined queries focus on a
certain class of defects, e.g., whether all sensors are wired to software variables, and deliver
a result set of signals across disciplines where this assumption is not given. Experts can
focus on the designated signal traces to check whether the traces (and the connection
between sensor, switchboard, and software variable) are correct. See (Biffl et al., 2011) for a
detailed description and prototype application of the End-to-End-Test.
5.3 Project management support
Observing and monitoring the current project state is a key requirement in ASE projects.
Because of the heterogeneity of disciplines and the involvement of various stakeholders in
deriving the current project state becomes challenging. Our observations at industry
partners showed that distributed project data have to be collected and analyzed manually
including a high effort. Therefore, the project state is captured infrequently and on
request.
Improving Quality Assurance in Automation Systems Development Projects
393
Based on a VCDM the ASB approach enables tool-supported data collection, analysis and
visualization by providing project data to relevant stakeholder, e.g., to engineers or to the
project manager. We developed an engineering cockpit (Moser et al., 2011) to support PM
and QA in ASE projects. Figure 10 presents a prototype of an engineering cockpit to observe
changes and the impact of changes in an automation system engineering projects. Major
components of this cockpit are (a) role specific views on engineering data and activities, (b)
team awareness, and (c) status data regarding the project based on signals as common
concepts. Figure 10 presents a snapshot of an engineering project at the industry partner.
The data presentation section focuses on the project progress, i.e., the number of signals and
the corresponding state of the signal, (e.g., in work, released, changed) per project phase and
over time. Selecting defined data sets lead to a drill-down, i.e., a more detailed view on the
engineering data within the selected scope. The example shows a selected set of components
and the already implemented signals as wells as the expected number of signals for
completing the components. Note that the engineering cockpit enables the presentation of
data (signals) across disciplines and tool borders and enables a comprehensive view on the
engineering project.
See (Moser et al., 2011) for a more detailed description of the engineering cockpit prototype.
Based on the prototype implementation of the engineering cockpit in an ongoing research
project, we will also address additional information and activities with respect to provide a
central starting point for PM and QA in AS development projects.
Fig. 10. Project observation with the engineering cockpit (Moser et al., 2011).
Quality Assurance and Management
394
6. Conclusion
This chapter presented a snapshot of an ongoing research project (CDL-Flex
6
) summarizing
QA aspects for automation system development projects.
6.1 Summary and lessons learned
The development of large-scale AS, e.g., manufacturing systems and power plants, involve
various disciplines, e.g., electrical, mechanical, and software engineers, who have to
collaborate to construct high quality systems. Collaboration between disciplines and tool
borders is a success-critical issue in AS development projects. Typically, disciplines are
isolated using individual tools (technical heterogeneity), data models (semantic
heterogeneity), and adapted development processes (process heterogeneity). These different
levels of heterogeneity make collaboration more difficult and more risky. In addition
distributed and heterogeneous data models hinder effective and efficient QA and PM.
Efficient synchronization, collaboration, and QA mechanisms are required to support
systems development projects. Up to now synchronization and QA across disciplines
requires domain experts (familiar in at least two related disciplines), who perform these
overlapping tasks manually. These manual activities require a high effort and include
defects, which can be avoided by tool-supported mechanisms.
This chapter introduced to the Automation Service Bus (ASB), a flexible middleware
platform with focus on the technical integration of tools and the semantic integration of data
models in heterogeneous engineering environments (Biffl et al., 2009). Technical and
semantic integration is the foundation for bridging the gap between disciplines in the AS
project and enable effective and efficient PM (project observation and control) and QA
across disciplines and tools borders.
Research Question 1 (RQ1). Enabling efficient data exchange in heterogeneous ASE
environments. To overcome the semantic gap between heterogeneous data models and data
we introduced the Virtual Common Data Model (VCDM). The VCDM aims at bridging the
gap between heterogeneous data models by (a) identifying common concepts (e.g., signals)
and (b) map isolated data sources to a common Engineering Data Base (EDB) as a central
repository for exchanging data between various sources efficiently. The VCDM is the
foundation for synchronizing data from various sources efficiently.
Based on our observation and discussions with our industry partner we developed the
signal change / signal deletion handling process (Winkler et al., 2011). This process
approach embedded as a central use case for AS development projects enables
systematic data exchange between various stakeholders (across a centralized EDB) based on
common concepts (signals), leaving additional discipline-specific data within the specialized
domain. Therefore, this ASB approach is considered as a light-weight approach for handling
heterogeneous engineering environments.
Research Question 2 (RQ2). Support for QA across disciplines in heterogeneous environments.
Isolated disciplines and processes include individual QA activities with focus on defect
detection within one (isolated) discipline. Nevertheless, QA across disciplines is still
6
See CDL-Flex website http://cdl.ifs.tuwien.ac.at
Improving Quality Assurance in Automation Systems Development Projects
395
challenging. Software inspection and testing (more specifically, integration testing) are
promising candidates for cross-disciplinary QA activities. Based on the results of a
difference analysis (part of the signal change/deletion handling process) domain experts
can focus on selected and critical subsets of engineering objects (signals) for conflict
resolution and defect detection (focused inspection). Focused inspection enables defect
detection in the overlapping areas (where engineers from different disciplines have to
collaborate) from different perspectives with respect to detecting defects. Nevertheless, a
comprehensive view on the signal (from sensor to variable) is still challenging. Therefore we
introduced the End-to-End test to focus on signal traces to identify different classes of
defects, e.g., whether all sensors are connected to a switchboard and if all software variables
are connected to data values for further operations.
Research Question 3 (RQ3). Support for project and quality managers in collecting and
analyzing project data (from heterogeneous sources) more effective and efficient to enable
continuous project monitoring and control. Isolated and heterogeneous data source also
hinder efficient PM because similar to synchronization and QA data from various
sources have to be captured and analyzed manually and on request. The VCDM as data
source of common data from different sources is the foundation for a comprehensive view
on engineering data across disciplines. We introduced the Engineering Cockpit (Moser et al.,
2011) providing the Window to engineering data aiming at (a) providing stakeholder
related data derived from the engineering project data bases and (b) enabling control of
project steps based on the analysis results.
Nevertheless the presented prototype implementations are a starting point for supporting
AS development projects in an ongoing research project.
6.2 Future work
Based on the results from the research project and after discussing them with our industry
partner we identified a set of future work aspects related to QA and PM.
Common concepts. Signals have been identified as common concepts in the domain of
hydro power plant systems integration. Because of generalization opportunities of the
ASB approach, we plan to investigate additional application domains to include a wider
range of common concepts.
Process observation and control. The signal change/signal deletion handling processes
have been considered as very critical processes in the application domain. Nevertheless,
future work will include the consideration of more and more complex processes. Next
steps will also include tool-supported definition, implementation and evaluation of
processes and process results (Sunindyo et al., 2010).
Focused inspection. This work highlighted the applicability of (perspective-based)
inspection for inspecting the overlapping areas of related disciplines. Nevertheless, a
more detailed inspection approach has to be developed and evaluated to enable the
applicability in industry context.
Consistency. Future work also includes checks for consistency during the check-in
processes (a) within one signal and (b) across signals based on pre-defined rules for
signal data sets. The goal is to identify deviations early in the development process, i.e.,
during the specification and design phase of the engineering project.
Quality Assurance and Management
396
End-to-End-Test. First results of a prototype evaluation showed benefits of the
integration test across disciplines. Nevertheless open issues will focus on different
defect types and how to address them properly. In addition, empirical studies are
necessary to evaluate the effectiveness and efficiency of end-to-end test approaches.
Finally, empirical studies in industry context are necessary to evaluate the presented
concepts (a) in academic and (b) industry environments for the validation of the ASB
approach and related industry applications.
7. Acknowledgements
This work has been supported by the Christian Doppler Forschungsgesellschaft and the
BMWFJ, Austria. We want to thank the domain experts at industry partners for their insight
into engineering projects and their feedback on draft versions of this chapter.
8. References
(Baker et al, 2008) Baker, P., Zhen, R. D., Gabrowksi, J., & Oystein, H.. Model-Driven Testing:
Using the UML Testing Profile, Springer, 2008.
(Basili, 1997) Basili, V. Evolving and Packaging Reading Techniques, Journal of Software and
Systems, 38(1), pp3-12, July 1997.
(Beck et al, 2004) Beck, K., Andres, C. Extreme Programming Explained - Embrace Change,
Addison-Wesley, 2004.
(Biffl, 2001) Biffl S. Software Inspection Techniques to support Project and Quality Management,
Shaker, 2001.
(Biffl et al, 2003) Biffl S., Halling M.: Investigating the Defect Detection Effectiveness and
Cost Benefit of Nominal Inspection Teams, IEEE Transactions of Software
Engineering 29(5), pp 385-397, 2003.
(Biffl et al., 2009a) Biffl, S, Schatten A. & Zoitl A. (2009). Integration of Heterogeneous
Engineering Environments for the Automation Systems Lifecycle Proceedings of the
IEEE Industrial Informatics (INDIN) Conference, Cardiff, UK, June 2009.
(Biffl et al, 2009b) Biffl, S., Sunindyo, W.D., and Moser, T. Bridging Semantic Gaps Between
Stakeholders in the Production Automation Domain with Ontology Areas, Proceedings of
the 21
st
International Conference on Software Engineering and Knowledge
Engineering (SEKE), Boston, USA, 2009.
(Biffl et al., 2011) Biffl, S., Moser, T., Winkler, D.: Risk Assessment in Multi-Disciplinary
(Software+) Engineering Projects. International Journal of Software Engineering
and Knowledge Engineering (IJSEKE), Special Session on Risk Assessment, Volume
21(2), March 2011.
(Chappell et al., 2004) Chappell D.A.: Enterprise Service Bus: Theory in Practice, OReilly
Media, ISBN: 978-0596006754, 2004.
(Gamp, 2008) GAMP 5. Good Automated Manufacturing Practice. International Society for
Pharmaceutical Engineering (ISPE), 2008.
(Hametner et al, 2011) Hametner, R., Kormann, B., Vogel-Heuser, B., Winkler D., Zoitl, A.,
Test Case Generation Approach for Industrial Automation Systems, Proceedings of the
5th International Conference on Automation, Robotics and Applications
(ICARA), Wellington, New Zealand, December 2011.
Improving Quality Assurance in Automation Systems Development Projects
397
(Kaner et al, 1999) Kaner, C., Falk, J., Hguyen, H.Q.: Testing Computer Software, Wiley, 1999,
(Kollanus et al, 2007) Kollanus, S., & Koskinen, J., Survey of Software Inspection Research: 1991-
2005, Working Paper WP 40, University of Jyvskyl, 2007.
(Laitenberger et al, 2000) Laitenberger, O., DeBaud J.M. An encompassing life cycle centric
survey of software inspection, Journal of Software and Systems (JSS), 50(1), pp5-31,
2000.
(Meyers et al., 2004) Meyers, G.J., Sandler, C., Badgett, T. & Thomas, T.M. The Art of Software
Testing, 2
nd
edition, John Wiley & Sons, 2004.
(Moser et al., 2010a) Moser, T., Waltersdorfer, F., Zoitl, A. & Biffl. Version Management and
Conflict Detection Across Heterogeneous Engineering Data Models. Proceedings of the
8th IEEE International Conference on Industrial Informatics (INDIN), Osaka, Japan,
July, 2010.
(Moser et al., 2010b) Moser, T., Biffl, S., Sunindyo, W.D & Winkler, D.: Integrating Production
Automation Expert Knowledge across Engineering Stakeholder Domains. Proceedings of
the 4th Interational Conference on Complex, Intelligent and Software Intensive
Systems (CISIS), Krakow, Poland, February 2010.
(Moser et al., 2011) Moser, T., Mordinyi, R., Winkler, D., & Biffl, S. Engineering Project
Management using the Engineering Cockpit: A collaboration platform for project managers
and engineers. Proceedings of the 9th International Conference on Industrial
Informatics (INDIN), Lisbon, Portugal, July 2011.
(Sage et al., 2009) Sage, A.P., Rouse, W.B. Handbook of Systems Engineering and Management,
2
nd
Edition; Wiley, 2009.
(Schfer et al, 2007) Schfer, W. & Wehrheim, H. The Challenges of Building Advanced
Mechatronic Systems, Proceedings of the Intenational Conference on Software
Engineering (ICSE), Future of Software Engineering, Washington DC, USA,
2007.
(Schatten et al, 2010) Schatten, A., Biffl, S., Demolsky, M., Gostischa-Franta, E., streicher,
T., & Winkler D., Best-Practice Software-Engineering : Eine praxisorientierte
Zusammenstellung von komponentenorientierten Konzepten, Methoden und Werkzeugen,
Spektrum Akademischer Verlag, 2010.
(Schulmeyer, 2008) Schulmeyer, G.G. Handbook of Software Quality Assurance. 4th edition,
Artech House Inc, 2008.
(Schwaber, 2004) Schwaber K.: Agile Project Management with Scrum, Microsoft Press, ISBN:
978-0735619937, 2004.
(Sommerville, 2007) Sommerville, I. Software Engineering, 8th Edition, Addison Wesley,
2007.
(Sunindyo et al., 2010) Sunindyo W.D., Moser T., Winkler D., & Biffl S.: Foundations for Event-
Based Process Analysis in Heterogeneous Software Engineering Environments,
Proceedings of the 36th Euromicro Conference, Software Engineering and
Advanced Applications (SEAA), Lille, France, September 2010.
(Winkler, 2008) Winkler. D. Improvement of Defect Detection with Software Inspection
Variants: A Large-Scale Empirical Study on Reading Techniques and Experience, VDM,
May 2008.
Quality Assurance and Management
398
(Winkler et al, 2009) Winkler, D., Biffl, S., & streicher, T. Test-Driven Automation Adopting
Test-First Development to Improve Automation Systems Engineering Processes.
Proceedings of the 16th European Software & Systems Process Improvement and
Innovation (EuroSPI) Conference, Madrid, Spain, September 2009.
(Winkler et al., 2011) Winkler, D., Moser, T., Mordinyi, R., Sunindyo, W.D. & Biffl, S.
Engineering Object Change Management Process Observation in Distributed Automation
Systems Projects, Proceedings of the 18th European Systems & Software Process
Improvement and Innovation Conference (EuroSPI), Roskilde, Denmark, June 2011.
0
Optimization of Optical Inspections
Using Spectral Analysis
K. Ohliger, C. Heinze and C. Krhnert
Westcoast University, Heide
Institute Machine Vision Technology
Germany
1. Introduction
Machine vision is proving its potential to be an efcient tool for increasing product
quality and for decreasing manufacturing costs. Many applications use automated optical
inspection systems for measuring mechanical dimensions and for monitoring quality features
of manifold products. Optical inspection systems consist mainly of a handling system, a
vision system and a user interface. The vision system can be divided into an acquisition
and processing part. While there exists much literature about image processing there is
less attention spent for designing an image acquisition system. The system accuracy and
processing speed correlates directly to image quality dened as the contrast between the
different features (e.g. objects) in the image. Caused by the increasing complexity and
difculty of the inspection tasks and the demand for increasing throughputs, image quality
gets more important for reliable vision systems. This chapter deals with spectral methods for
the selection of hardware components within the acquisition systemto optimize image quality.
We show that our analytical methods will increase image quality and decrease classication
error rates of a vision system.
The outline of this chapter is as follows. The chapter is divided into four sections. Section
2 gives a short introduction into image acquisition and introduces the components involved
and the modelling of their spectral characteristics afterwards. This includes the lightsource,
the reection behavior of materials, the optics and the sensor. The section concludes with a
model developed to describe the feature of image pixels due to the acquisition chain.
Section 2.2 explains the methods developed how to select the acquisition components for the
visible and infrared wavelength range. This optimization is done by using different statistical
approaches resulting in two types of image quality measures.
Experimental results for simulated and real data are presented in Section 4. It will be shown
that our approach of selecting the hardware components leads to a much lower error rate of
the respective inspection task.
This chapter concludes with a summary and discussion of the results.
2. Image acquisition
The image acquisition chain is shown in Fig. 1. The resulting image is inuenced by four
different components: the lightsource, the observed scene, the optics and the camera. The
21
2 Will-be-set-by-IN-TECH
incident light is emitted by a lightsource which has a specic spectral power distribution. The
observed scene includes different objects reecting the incident light depending on spectral
reection behavior. The reected light is focussed by optic components transmitting the light
according to their optical transmission characteristics. Finally the camera generates an image
using a sensor element which has a wavelength dependent degree of efciency.
In Sections 2.1 to 2.4 the different types of these components and their characteristics with
respect to their spectral behavior are shown. Section 2.5 introduces a model for the acquired
image with respect to the components included in the image acquisition chain.
2.1 Lightsource
The lightsource within a vision system plays an important role. Primary properties of
lightsources are intensity, propagation direction, frequency or wavelength spectrum, and
polarization. Lightspeed in vacuum, 3 10
8
meters per second, is one of the fundamental
constants of nature. With respect to machine vision tasks the relevant information of the light
emitted by a lightsource is the total radiant intensity I
total
and the spectral radiant intensity
distribution p
I
total
at a point x, y, z of the observed scene resulting in the wavelength dependent
radiant energy I
L
of the incident light:
I
L
(; x, y, z) = p
I
total
() I
total
(x, y, z) . (1)
The assumption that p
I
total
is spatially invariant is valid in most of the machine vision tasks.
If the intensity of light is graphed over the corresponding wavelengths, the spectral behavior
of a lightsource can be analyzed. Fig. 2 shows the spectrum of light that is emitted by the
sun. The gure shows that the human eye can only perceive a small amount of the radiation
emitted by the sun. The visible spectrum for a typical human eye corresponds to a range from
about 390nmto 750nm(Wald (1945)). Arendering of this spectrumis shown in Fig. 3. Sunlight
is rarely used as a primary lightsource in a vision system. The most common lightsources
are incandescent light bulbs, gas-discharge lamps and light emitting diodes. Light emission
by incandescence can be designed to have the same type of emission by which sunlight is
Fig. 1. Image acquisition chain
400 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 3
Fig. 2. Spectrum of sunlight (outside atmosphere and at sea level) (Wiki (2007))
created. Both the surface of the sun and the metal lament in an incandescent light bulb
glow because of their high temperature (thermal radiation). All materials glow if they are
above a temperature of 0K, but below the Draper Point (798K) the intensity is too small to be
perceived with the human eye. A model of the emitted thermal radiation can be found by
using an idealized material called a black body. A black body is both a perfect absorber and
emitter of radiation. The spectrum of the emitted radiation depends on the temperature only
and can be expressed by Plancks Law:
u(, T) =
2hc
2
5
1
e
hc
kT
1
. (2)
The intensity of the emitted light u at a certain wavelength and temperature T can be
calculated as shown above with h as Plancks constant, c as the speed of light in a vacuum
and k as the Boltzmann constant. Fig. 4 shows the spectra of blackbody radiation at different
temperatures. These spectra show the general characteristics for the spectrum emitted by the
sun (T = 5500K) and that of an incandescent bulb (T = 3500K). The spectrum emitted by
thermal radiation is always continuous and covers all frequencies of the visible spectrum and
beyond. In vision systems, incandescent bulbs are used as a lightsource with a broadband
spectrum. This means that the intensity of the light reected from the object is mostly
dependent on the material of the object and not on the spectrum of the lightsource only.
Another type of lightsource often used in vision systems is the gas-discharge lamp. Several
different types of these lamps exist, such as neon lamps, sodium-vapor lamps and uorescent
lamps. All of these lamps emit radiation due to the same principle. The atoms of the gas
inside the lamp are ionized by electrical energy. This means that some of the electrons are free
to move from their atoms. These free electrons are accelerated by an electrical eld within the
lamp and will collide with other atoms. Some electrons in the atomic orbitals of these atoms
are excited to a higher state of energy by these collisions. When the excited atom falls back
to a lower state of energy, it emits a photon of a characteristic energy, resulting in infrared,
Fig. 3. Visible spectrum of electromagnetic radiation (Wiki (2010))
401 Optimization of Optical Inspections Using Spectral Analysis
4 Will-be-set-by-IN-TECH
Fig. 4. Spectra of blackbody radiation at different temperatures (Wiki (2009))
visible, or ultraviolet radiation. Since the wavelength of a photon is related to its energy E
=
h
E
, (3)
these lamps can emit light in very specic parts of the spectrum.
The spectrum of a low pressure sodium-vapor lamp is given as an example for this smallband
emission of radiation in Fig. 5. The light emitted by this lamp is almost monochromatic and
has a characteristic yellow-orange color. The characteristic energy which is responsible for
this behavior can be altered by using different gases in the lamps. Fluorescent lamps use a
mercury vapor that emits radiation in the ultraviolet part of the electromagnetic spectrum.
This radiation will excite a uorescent coating inside the lamp, which in turn emits light over
a broader part of the visible spectrum. The spectrum of such a uorescent lamp is shown in
Fig. 6. The spectrum is characterized by many spectral lines, some of which are due to the
mercury vapor, while others are due to the uorescent coating. In total the light emitted by
this lamp is perceived as white.
Light emitting diodes (LED) are used more and more frequently in vision systems. This
type of lightsource uses the recombination of electrons and holes in a semiconductor to emit
radiation. The wavelength of the emitted radiation depends on the energy gap between the
Fig. 5. Spectrum of a low pressure sodium-vapor lamp (Rechtsteiner (1998))
402 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 5
Fig. 6. Spectrum of a uorescent lamp (Wiki (2011))
electron-energy and the hole-energy. Using different materials, this gap can be designed to
specic values. By this, the color of the LED can be inuenced. The rst LEDs developed in
the 1960s were red or infrared types. Modern LEDs are available in several colors across the
visible spectrum, ultraviolet and infrared wavelengths. The resulting spectra of these different
LEDs usually have small bandwidths. Fig. 7 shows the spectra of several color LEDs.
White LEDs can be designed in two different ways. The combination of three LEDs (blue,
green and red) with the spectra shown in Fig. 7 will make the LED appear white. If all three
LED types can be electrically contacted individually, the color of the LED can be changed
during use, which can be benecial in certain applications.
The other way to design a white LED is to use a phosphor coating. The phosphor coating
shifts a part of the emitted light to a higher wavelength. This is shown in Fig. 8, where the
small peak at the shorter wavelength is the original light emitted by the LED, and the broader
peak at longer wavelengths is due to the phosphor coating.
Fig. 7. Spectra of different single colour LEDs
403 Optimization of Optical Inspections Using Spectral Analysis
6 Will-be-set-by-IN-TECH
Fig. 8. Spectrum of white LED with original peak at lower wavelengths and broader, shifted
peak at higher wavelengths (Philips (2011))
2.2 Observed scene
An observed scene includes one or more objects that have to be inspected by the vision system.
The knowledge of the reection behavior of these objects will give us the possibility to choose
optimal components for the vision system. In this Section different models for the reection
of surfaces are introduced.
2.2.1 Lamberts model
Lamberts Model, which was advanced by Johann Heinrich Lambert in 17th century (Lambert
(1760)), is the basic of the most reection models and remains one of the most widely used
models in computer graphics (Oren & Nayar (1994)). If a surface reects the incoming
light equally in all direction, the surface is called a Lambertian reector (a perfect diffuse
reector). This means the luminosity of the surface is independent of angle of the observation.
According the Lamberts cosine law, the reected luminosity I
d
depends on the cosine of the
angle between the direction of the incoming light
. (5)
Hence, the luminosity of a Lambertian surface depends on the normal vector
N and the
direction of the normalized vector
L
_
. (6)
This model can be extended by regarding indirect light with an ambient term. The ambient
component is independent from the direction of the incoming light and the direction of the
viewer. The term depends on an ambient light I
a
and the ambient-material coefcient k
a
and
is homogeneous over the complete scene
I
Re f l,LM
= I
a
k
a
+ I
L
k
d
L
_
. (7)
2.2.2 Blinn-Phong model
Since the introduction of computers and in particular 3D graphics, the light models became
more and more important. Bui-Tuong Phong extended the Lamberts light model with a
component that simulates light that is reected in a certain direction (Eriksson (2006)). This
component is called specular component of light reection. The model was presented 1975,
nearly two hundred years after the publication of Lamberts model. The main aspects of the
Phong model are
light sources are point-like
the geometry of the surfaces unless the surface normal is ignored
diffuse and specular reection are modeled locally
ambient reection is modeled globally.
The Blinn-Phong Model is derived from the Lamberts Model by adding a specular term to (7)
I
Re f l,BP
= I
a
k
a
+ I
d
+ I
s
. (8)
Where I
a
and I
d
are the ambient and the diffuse components from the Lamberts model. The
effect of the specular term I
s
can be seen for example when a billiard ball is illuminated by
single non-diffuse light. The light source produces a spot on the ball, which varies with the
position of the viewer. Reason for this effect is that surfaces are not perfect mirrors. A perfect
mirror would reect the incoming light only in one direction, so that a viewer would see the
reection only in one direction. In practice the light intensity is a more complicated function
of the angle between the reected light ray
R and the view angle (Eriksson (2006)).
Phong expressed an empirical approach to model the amount of reected light that is
described by
I
s
= I
L
W() C
p
[cos()]
n
(9)
405 Optimization of Optical Inspections Using Spectral Analysis
8 Will-be-set-by-IN-TECH
Fig. 10. Halfway vector H
Where W() is the ratio of reected light and incident light as function of the incident angle
. Phong determined the range of W() in percent, varying from 10 to 80 percent. presents
the angle between the reected light
R and the vector
V (the direction of the viewer). The
parameter n describes the characteristics of the surface, Phong used values between one and
ten. For a highly reecting surface the parameters n and W() are large. C
p
is the reection
coefcient of an object at Point P for a certain wavelength.
Phongs original equation is also often written (Duff (1979), Lewis (1994), Kajiya (1989)) as:
I
s
= I
L
k
s
(cos )
n
, (10)
with k
s
as specular material coefcent and
cos =
. (11)
This leads to
I
s
= I
L
k
s
(
V)
n
, (12)
under the assumption that |V| and |R| = 1.
The Phong light model was extended by James Frederick Blinn 1977. He reformulated the
Phong model by a physically based light model. He introduced the half-vector
H, instead of
the
R.
H is dened as the vector halfway between the incoming light- and the viewer vector:
H =
V
|
L +
V|
. (13)
In addition Blinn denes
as the angle between the normal vector of the object surface and
the halfway vector
cos
, (14)
which is proportional to the angle . Thus the angle could be replaced by the angle
(see
Fig. 10):
406 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 9
I
s
= I
L
k
s
(cos
)
n
, (15)
with (14) resulting in:
I
s
= I
L
k
s
(
H)
n
. (16)
Reason for this substitution is that the halfway vector can be simpler calculated than the
reection vector.
The overall reected intensity can hence be determined by:
I
Re f l,BP
= I
a
k
a
+ I
L
(k
d
(
L) + k
s
(
H)
n
). (17)
2.2.3 Cook-Torrance model
The disadvantage of the light models from Blinn and Phong is that the models have no
physical basis. Robert L. Cook and Kenneth E. Torrance developed the Cook-Torrance
light model in 1981 on a physical model. The model describes the surface by many little
facets (mirrors), which allows to consider the refraction ratio, the roughness and shadowing.
Torrance describes the reectivity in He (2001), as follows:
I
Re f l,CT
= I
a,CT
+ I
d,CT
+ I
s,CT
. (18)
In the equation I
a,CT
describes the ambient-, I
d,CT
the diffuse- and I
s,CT
the specular
reectivity. The following equations present the content of this three terms:
I
a,CT
= a(). (19)
a() is the ambient term, which is like the other light models uniform diffuse over the scene.
The diffuse reected light is expressed as:
I
d,CT
= I
L
|F|
2
G S D(
rough
, )
(
V)(
L)
= I
L
k
d,CT
_
,
rough
_
(
V)(
L)
. (20)
Parameter G is the geometry attenuation factor and S the shadowing function, both together
describing the selfshadowing due to the microfacets. D is the distribution function of the
roughness which is based on a physical model of microfacets distributions. D is dependent
on the wavelength. k
d,CT
contains the inuence of the material and its surface attributes. The
ratio of refraction of the surface, will be described by the Fresnel function F, which presents
the reection and refraction of light at uniform planar interfaces.
The specular part is
I
s
= I
L
|F|
2
e
g()
S
cos(
i
)d
i
, (21)
where g is the surface roughness function, which is also dependent on the wavelength. In (21)
the parameter d
i
describes the incident solid angle and
i
is the polar angle, which is the
angle between normal vector and the incident light vector. describes the specular inuence
and is one if in specular cone otherwise it is zero (He (2001)).
407 Optimization of Optical Inspections Using Spectral Analysis
10 Will-be-set-by-IN-TECH
Material Transmission range Features
BK7 330nm - 2100 nm High transmission for visible to
near infrared applications, the most
common optical glass
UV Grade Fused Silica 185nm - 2500nm Excellent homogeneity and low
thermal expansion, high laser
damage resistance
CaF
2
170nm - 8000nm High transmission for deep UV to
infrared applications
MgF
2
150nm - 6500nm Birefringent material, excellent for
use in the deep UV to infrared
ZnSe 600nm - 16000nm Excellent choice for IRlens due to its
broad wavelength range.
Table 1. Transmission range and further features of different glass materials
2.3 Optics
The optics of a vision system have strong inuence on many image characteristics e.g. the
spatial resolution, depth of focus, image intensity. Additionally the contrast between different
objects depends on the spectral behavior of the optics. This Section will focus on the variation
of spectral transmission for optical materials and lens types. In general two different aspects
inuence the spectral transmission of optics: the lens material and the lens alignment and
coating. Hence the transmission of the optics t
opt
can be described as:
t
opt
(; x, y) = t
mat
(; x, y) t
alig
(; x, y) . (22)
While t
mat
is the transmission of the lens material, t
alig
includes the transmission inuenced
by the coating and alignment. x, y indicates the position of light beam entering the optical
system.
2.3.1 Spectral transmission of different lens materials
In optics, transmission is the property of a mediumallowing light to pass through the medium
with some or none of the incident light being absorbed or reected during the process.
Different glass materials have different transmission ranges, allowing light to pass at different
wavelengths. Standard optical glasses offer high transmission throughout the entire visible
spectrum and also the near ultraviolet and near infrared range (Newport (2011)). In the
following, the spectral transmission of different glass materials for optical lenses is shown.
As Table 1 and Fig. 11 show, the spectral transmission of different materials vary especially
outside of the visible spectrum. When glass elements are combined to form a photographic
lens, the spectral transmission changes.
2.3.2 Spectral transmission of different lens types
The degradation of spectral bandwidth is mostly due to antireective coating, which is
specically designed to block ultraviolet or infrared radiation. A typical photographic lens is
optimized for the visual spectrum of electromagnetic radiation. In the following, the spectral
transmittance of different photographic lenses are shown by real-world examples.
408 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 11
First, the spectral transmission of a Schneider Optics Cinegon 1.4/8mm is shown in Fig. 12
(a). The Cinegon is used as an example for all standard purpose photographic lenses. The
diagram shows a relatively at transmittance between 400nm and 700nm. Since this is a
prime lens with a xed focal length, a relatively simple design with six glass elements can be
used. The transmittance of a more complex photographic lens will usually show a different
characteristic, caused by an increasing number of glass elements.
Fig. 12 (b) shows the spectral transmittance of a Schneider Optics Variogon 1.8/12.5-75 zoom
lens. This lens uses an array of 16 glass elements instead of the six elements used in the
Cinegon 1.4/8mm shown above. This transmittance diagram is used as an example of a more
complex photographic lens, that has not been optimized for a greater transmission bandwidth.
In comparison it can be seen, that the peak transmittance is about 15% lower than that of the
simpler lens design. Also the transmittance has a smaller bandwith, with lower transmittance
values below 450nm or above 600nm.
For optical imaging outside the visual spectrum, special photographic lenses should be used.
These are usually optimized on the infrared or the ultraviolet part of the electromagnetic
spectrum. Fig. 13 (a) shows the spectral transmittance of a Jenoptik CoastalOpt UV4.5 105mm
lens. The usable transmission range starts at 250nm and declines again at 650nm. This lens
mostly covers the ultraviolet spectrum, which can be useful for defect detection (Richards
(2006)).
Next, an example for a lens covering the infrared spectrum is given. The lens in this example
(Fig. 13 (b)) is a Jenoptik CoastalOpt Hyperspectral 2/25mm SWIR lens. The largest part of
usable transmittance is above the usable range of UV lens mentioned before. Usable range
with a transmittance above 80% starts at 400nm and ends at 1650nm.
2.4 Camera
Finally the image is generated by a camera using an image sensor. Depending on the
wavelength, different types of sensors are used. The appropriate sensor types for ultraviolet to
infrared wavelengths are introduced in this Section. Some differences between sensor types
Fig. 11. Spectral transmission of optical materials (Newport (2011))
409 Optimization of Optical Inspections Using Spectral Analysis
12 Will-be-set-by-IN-TECH
(a) (b)
Fig. 12. Spectral transmittance of Schneider Optics Cinegon 1.4/8mm (a) and Schneider
Optics Variogon 1.8/12.5-75mm (b) (Schneider (2011), Schneider (2011b))
as well as the variation for equal sensor types are shown. The key aspect for the spectral
behavior of an image sensor is its quantum efciency (QE). The QE () is an attribute which
describes how many photons are transformed to electrical charge carriers depending on the
wavelength:
QE () =
n
e
n
ph
()
. (23)
n
e
is the count of electrical charge carriers, generated by n
ph
photons with a wavelength .
2.4.1 Quantum efciency of image sensor materials
Digital image sensors are based on the transformation of electromagnetic waves energy
transported by photons to electrical energy. The energy E
ph
of a photon can be described
by
E
ph
() =
h c
, (24)
where is the corresponding wavelength, h is Plancks constant and c is the speed of light.
This means that different wavelengths of light have different energies, with the infrared part
of the spectrum being lower in energy than the ultraviolet part. (23) and (24) can be combined
(a) (b)
Fig. 13. Spectral transmittance of Jenoptik CoastalOpt UV 4.5/105mm (a) and Jenoptik
CoastalOpt Hyperspectral 2/25mm (b) (Jenoptik (2007), Jenoptik (2011))
410 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 13
Fig. 14. Spectral sensitivity of different sensor materials: Si (violet), InGaAs1.7 (blue),
InGaAs2.2 (green), InGaAs2.5 (red) (Goodrich (2006))
for describing the energy efciency (EE) of a sensor:
EE () =
n
e
n
ph
() E
ph
()
. (25)
Digital image sensor cells use semiconductors to detect energy in different parts of the
electromagnetic spectrum and hence different wavelengths of light. The part of the spectrum
where a sensor cell is sensitive to light energy is determined by the material (Fig. 14) This
diagramshows the quantumefciency for different materials. Ahigh quantumefciency over
a large frequency range is desirable, so that as much energy as possible can be converted from
light to electrical charge. As with lenses, the properties of the sensor materials will determine
the maximum range in which a sensor is applicable.
2.4.2 Quantum efciency of different sensor types
While the quantum efciency of a single image sensor cell is determined by the factors above,
the efciency for a whole chip is additionally inuenced by the ll rate. The ll rate states
the percentage of the sensor surface is used to detect light. The ll factor only inuences the
quantum efciency as a constant factor.
In the following, the quantum efciency of different image sensors is shown by real-world
examples. First, the quantum efciency of a Basler A622f camera (Basler (2011)) is shown in
Fig. 15 (blue curve). The diagram shows, that the quantum efciency peaks at 25% between
500nm and 600nm wavelength. This corresponds roughly to the green and orange parts of
visible light. While the maximum efciency of 25% is rather low, this can be countered by
increasing the light intensity on the object. In contrast to this, Fig. 15 (yellow curve) shows the
quantum efciency diagram of a Basler A601f camera. This diagram shows a higher quantum
efciency over the whole wavelength range, with a peak of over 30% at 600nm. Not only
the peak efciency is higher, the bandwidth is also higher. Though these two cameras can
be considered as relatively common and state of the art, the better quantum efciency of the
latter model has a great impact on image noise in low light situations.
411 Optimization of Optical Inspections Using Spectral Analysis
14 Will-be-set-by-IN-TECH
2.5 Image output model
This Section introduces the image output model which will describe the image with respect
to the components of the image acquisition chain. Our image output model assumes that
the incident light of the observed scene is homogeneous in spectral intensity distribution and
total radiant intensity. While the rst is nearly common, requires the ladder a light source
which illuminates the eld of view homogeneously and the distance of the lightsource to the
observed scene is nearly constant
x,y
z z, (26)
with z as mean object distance. This simplies (1) to
I
L
() = p
I
total
() I
total
. (27)
Considering only passive objects without any light emission the ambient term of the reected
light has negligible inuence. Since the specular reection is mainly concentrated in a narrow
cone small changes in the surface direction will lead to a high variation in the reected amount
of light. This is not appropriate for machine vision solutions. Hence we concentrate on diffuse
reection and (18) using (27) of the Cook Torrance model leads to:
I
Re f l
_
;
rough
;
N,
V,
L; x, y
_
=
I
L
()
k
d,CT
_
,
rough
; x, y
_
(
V)(
L)
. (28)
Further we assume that the roughness of each object is a material constant which does not
vary signicantly within the object region leading to:
I
Re f l
_
;
N,
V,
L; x, y
_
=
I
L
()
k
d,CT
(; x, y)
(
V)(
L)
. (29)
Fig. 15. Quantum efciency of Basler A601f, A602f (yellow) and Basler A622f (blue) (Basler
(2011))
412 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 15
The dependency on x, y of k
d,CT
is caused by different objects in the observed scene depending
on the position. Hence different objects may result in varying k
d,CT
. The reected intensity
I
Re f l
is attenuated by the optics. In case of optics which can be described by small lens model
the spatial dependency in (22) has negligible inuence. This reduces the intensity transmitted
by the optics I
Opt
combining (29) and (22) to
I
Opt
_
;
N,
V,
L; x, y
_
= I
Re f l
_
;
N,
V,
L; x, y
_
t
opt
() . (30)
Combining the transmitted intensity to the image sensor (30) with the energy efciency of the
image sensor (25) leads to the sensor output signal (I
sensor
) and the transmitted intensity:
I
sensor
(x, y) = C
max
_
min
I
Opt
_
;
N,
V,
L; x, y
_
EE () d. (31)
With C being a constant including specic camera parameter like pixel area, ll factor,
gain settings and exposure time.
min
and
min
are the wavelength limits of the regarded
wavelength range given by the QE of the camera.
If the alignment of illumination, objects in the observed scene and camera is chosen to assure
that the vectors
N,
V,
max
_
min
I
Opt
(; x, y) EE () d. (32)
3. Spectral analysis
The spectral analysis is the determination of the spectral behavior of different objects. As
written in Section 2.5 the sensor output depends on the lightsource, the reection behavior
of the observed scene, the transmission of the optics and the quantum or energy efciency
of the camera. Spectral characteristics for the components of an acquisition system are often
provided by its manufacturers. On the contrary the spectral reection behavior of objects
in the observed scene are almost always unknown. In Section 3.1 a measurement setup for
the spectral reection behavior is described and in Section 3.2 is the measurement procedure
explained. In Section 3.3 the procedure for analyzing spectra is introduced.
3.1 Measurement setup
Ablock diagramof the measurement setup is shown in Fig. 16. The different components will
be introduced in the following Sections.
3.1.1 Lightsource
As written in Section 2.1 there exists a high variation of different lightsources. The main
aspects for a lightsource within a spectral measurement setup are the amount of intensity, the
spectral range and the atness of the spectrum. Our setup is equipped with a 150 Watt Xenon
lightsource (XE) with a spectrum similar to the spectra shown in Fig. 17. The advantages of
the XE lightsource is the wide wavelength range (from 250nm to at least 2000nm) and its high
intensity. Its disadvantage are narrow and high peaks between 800nm to 1100nm.
413 Optimization of Optical Inspections Using Spectral Analysis
16 Will-be-set-by-IN-TECH
Fig. 16. Blockdiagram of the measurement setup
3.1.2 Lightsource to lightguide coupling element
One important challenge of designing a spectral measurement setup is the coupling of the
lightsource to the lightguide without loosing too much light intensity. The output of the XE
Fig. 17. General spectra of XE lightsources
414 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 17
lightsource is a nearby collimated circular light beam of 8mm diameter and the core diameter
of single mode lightguides is only up to 1.5mm. Hence the light beam of the lightsource has
to be focussed to the lightguide input. This is accomplished by a parabolic mirror and a three
axis adjustment.
3.1.3 Lightguides
Depending on the wavelength range that has to be measured two different types of
lightguides are used. One which is optimized for a wavelength range from 200nm to 1100nm
and another which is optimized for the wavelength range from 900nm to 2200nm. These two
different congurations are used depending on the spectrometer type.
3.1.4 Lightguide to probe coupling element
The light beam transmitted by the lightguide has to illuminate the probe area of interest. In
order to measure the diffuse reection behavior an integrating sphere is used. Advantages
of the integrating sphere are the reduction of specular reection and the angle independent
collection of diffuse reected light. The integrating sphere is coated with a material which
has a high reection (>98%) in the desired wavelength range. While the diffuse reected light
of the probe is reected several times within the integrating sphere and nally coupled into
the output port the specular reection is absorbed. The probe area is limited to a diameter of
8mm.
3.1.5 Spectrometer
The spectral measurement system can be equipped with two different spectrometers. The
rst spectrometer includes a charge coupled device sensor which is sensitive from 220nm to
1100nm. It can be used for measuring the spectral reection behavior in the ultraviolet, visible
and near infrared range (NIR). The second spectrometer uses an extended indium gallium
arsenide sensor to cover wavelengths from 900nm to 2200nm. This spectrometer can measure
NIR and short wave infrared wavelengths.
3.2 Measurement sequence
The spectral measurements are used to calculate the relative reection coefcients for the
different wavelengths. The following procedure has to be accomplished:
1. optimization of the integration time
2. measuring the black and white reference
3. gathering measurement readings of all objects
4. compensation and normalization of the measurement readings.
All of these points are explained in the sections below.
3.2.1 Optimization of the integration time
The integration time of the respective spectrometer has to be chosen with respect to high signal
to noise ratio (SNR). In general the SNR increases with higher integration times. The optimal
integration time lead to a high reection signal of the white reference without saturation.
415 Optimization of Optical Inspections Using Spectral Analysis
18 Will-be-set-by-IN-TECH
3.2.2 Measuring the black and white reference
The usage of two different reection standards is required to optimize the resolution and
reproduceability of the system. The rst standard is a specular black standard which has
very less diffuse reection. The measurement of this standard leads to information of noise
inuences that are generated by the measurement setup itself. The second standard is the
diffuse white reference with a high diffuse reection. This is used to determine the spectrumof
an approximately optimal reective object including all attenuation given by the measurement
system.
3.2.3 Gathering measurement readings
Multiple reection measurements are gathered for all different objects in the scene. It is
important that the measurements are representative for the objects reection behavior. So
the set of measurements has to include all variations given by the object surfaces. Although
having objects with low reection variation the count of total measurements has to be high
enough for using the data within a statistical context.
3.2.4 Compensation and normalization of the measurement readings
After taking the measurement readings of the different objects they have to be compensated
in terms of degradation caused by the measurement system. This is done by subtraction of all
object and white reference measurements R by the spectrum of the black reference R
black
:
R
comp
() = R() R
black
() , (33)
R
comp
is the compensated spectrum. Further the object measurements has to be normalized.
They are divided by the spectrum of the compensated white reference R
white,comp
resulting in
the relative reection spectra for the objects, called normalized spectra R
norm
:
:R
white,comp
()>0
R
norm
() = R
comp
() R
white,comp
() . (34)
For all R
white,comp
() 0 the normalized spectrum R
norm
is not valid.
3.3 Image quality with respect to segmentation
As written in Section 1 the main task of spectral optimization is to increase the image quality.
This includes the increase of the segmentation ability between different objects. If there exist
at least two objects (e.g. foreground and background) the segmentation task is the clustering
of regions which contain one single object. In literature there exist several image quality
measures driven by the need of compression algorithm benchmarking (see Wang (2002) and
Eskicioglu (1995) for details). Due to the fact that we are aiming at the segmentation of an
image those measures are not suitable in our case. The following sections introduce two
measures for image quality with respect to segmentation.
3.3.1 Signal to noise measure
The rst measure is based on standard signal to noise measure SNR. The assumption for the
two signals s
1
, s
2
to be separated is that their values are outcomes of normal distributions.
The signal to noise ratio includes the distance between the mean of two signals
1
,
2
and the
416 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 19
variance of both
2
1
,
2
2
:
SNR(s
1
, s
2
) =
|
1
2
|
2
1
+
2
2
. (35)
In our case the signals include intensity information and hence are energy based signals. It is
also common to use the decibel notation:
SNR
dB
(s
1
, s
2
) = 20 log
_
|
1
2
|
2
1
+
2
2
_
. (36)
The maximum of the SNR will lead to a maximum of image quality.
3.3.2 Classication error estimation
Another measure for the image quality with respect to segmentation is the classication error
including information of the rate between pixels assigned to the wrong object and pixels
assigned to the correct object. The estimation of this error requires the probability density
for the respective feature (e.g. greyvalue) of the different objects. The total error
tot
for two
objects
1
,
2
with their respective probability density function p
1
, p
2
can be determined by:
tot
(p
1
, p
2
) =
1
2
_
R
1
p
2
(x) dx +
_
R
2
p
1
(x) dx
. (37)
The rst integration term is in the range R
1
where the classication decides for
1
and for
2
in the second integration term. Due to the fact that p
1
and p
2
are unknown they have to
be estimated. Two different approaches that are implemented in our analysis software are
introduced briey in the following paragraphs. For further information see (Duda (2001),
Scott (1992), Wand (1995)).
The classication error is negative correlated to the image quality.
3.3.2.1 Parametric density estimation
The parametric density estimation assumes that the probability density can be described by a
certain number of parameters. The most commonly used parametric description of a density
is the unimodal Gaussian distribution N with its parameters mean and variance
2
. Given
N samples X
i
the expected mean value can be determined by
=
N
i=1
X
i
N
, (38)
and the expected unbiased variance value by
2
=
1
N 1
N
i=1
(X
i
)
2
. (39)
Using (38) and (39) the probability density estimation can be expressed as:
p (x) =
1
2
2
e
0.5(
x
)
2
. (40)
417 Optimization of Optical Inspections Using Spectral Analysis
20 Will-be-set-by-IN-TECH
3.3.2.2 Nonparametric density estimation
As written in Section 3.3.2.1 the parametric density estimation is only suitable for unimodal
Gaussian distributed signals. To overcome this another approach of density estimation, the
nonparametric density estimation, was developed. There exist several types of nonparametric
density estimators like histogram, polygonal and kernel density estimators. This section
focusses on the kernel density estimators also known as kernel smoothing. The principle
of kernel smoothing is a convolution of the sample values with a kernel:
p (x; h) =
1
N h
N
i=1
K
_
x X
i
h
_
. (41)
This kernel is congured by the type K and bandwidth h. While the type has limited inuence
on the estimation the bandwidth plays an important role. Different selection methods are
common: normal scale bandwidth, oversmoothed bandwidth, least square cross validation
bandwidth and plug-in bandwidth. We focus on the least square cross validation (LSCV)
bandwidth h
LSCV
while the LSCV is dened as (Wand (1995))
LSCV(h) =
_
p (x; h)
2
dx
2
n
N
i=1
p
i
(X
i
; h) , (42)
p
i
is the density estimate based on the sample set without X
i
. The LSCV bandwidth is found
by
h
LSCV
= arg min
h
LSCV(h) . (43)
4. Experimental results
4.1 Simulated data
In this section the spectral analysis is used on simulated data. These contain the simulated
behavior of lightsources, objects, optics and cameras. In the next Sections the spectral analysis
and the simulated image data using an optimized and a non-optimized conguration are
given.
4.1.1 Spectral analysis
The simulated data of the different hardware components and objects are shown in Fig.
18. We simulated two different lightsources (daylight and an LED), two different objects
represented by three spectra each, two optics optimized for different wavelength and two
cameras with the maximum energy efciency at 500nm and 670nm respectively. This lead
to eight different congurations. The image sensor signals were calculated according to (32).
The parameters describing the intensity value (mean and variance) are determined and the
classication errors are estimated for each object as shown in Table 2. It is obvious that the
selection of the lightsource plays an important role. The classication error is for the LED
approximately constant at 0.03%, while for daylight the error varies from 2.72%to 36.3%. This
high variation is impressive regarding the small differences between the spectra of different
optics and camera types. As a result the 8th conguration can be regarded as optimal setup
while the 5th conguration as worst setup.
418 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 21
(A) (B)
(C) (D)
Fig. 18. Merged spectra of two spectra describing different hardware components:
lightsources (A), objects (B), optics (C), and cameras (D)
4.1.2 Simulated image data
Using the estimated greyvalue distributions of Section 4.1.1 two images are calculated and
shown in Fig. 19. It is obvious that the 8th hardware conguration results in higher contrast
image (Fig. 19 (A)) than the 5th hardware conguration (Fig. 19 (B)). The SNR according to
(36) is 5dB for the optimized setup and 50dB for the worst setup.
Conguration
Id Lightsource Optics Camera
tot
1 Daylight 1 1 2.86
2 LED 1 1 0.03
3 Daylight 2 1 30.7
4 LED 2 1 0.04
5 Daylight 1 2 36.3
6 LED 1 2 0.03
7 Daylight 2 2 2.72
8 LED 2 2 0.03
Table 2. Classication error for different hardware congurations
419 Optimization of Optical Inspections Using Spectral Analysis
22 Will-be-set-by-IN-TECH
(A) (B)
Fig. 19. Simulated images for optimal conguration (A) and non-optimal conguration (B)
4.2 Real data
In this section we will showexperimental results using spectral optimization of the lightsource
only. The objects used within this experiment are shown in Fig. 20 using daylight illumination
in combination with a color camera. First the results of the spectral analysis are provided and
then the results are veried by using a real hardware setup optimized by these results and a
non-optimized setup are compared in terms of image quality for segmentation as described
in Section 3.3.
4.2.1 Spectral analysis
The spectral optimization is aiming at the separation of paperboard A from paperboard B and
C. As explained in Section 3.2 we take several spectra (20 for each paperboard) and calculate
the normalized spectra for each object. These spectra are shown in merged spectra diagrams
in Fig. 21. All diagrams show similar reection behavior with just small variances within
one object as shown in Fig. 21 (A), (B), and (C). The diagram showing the mean spectra
in Fig. 21 (D) illustrates only little differences between A and B, C in wavelength ranges
from 350nm to 450nm and from 550nm to 600nm. This is conrmed by the classication
error estimated parametric (see Fig. 22 (A)) and nonparametric (see Fig. 22 (B)) which show
small classication error rates for those wavelength ranges. Low classication error rates
indicate that the hardware component selection optimized for this wavelength ranges would
be appropriate in order to achieve high image quality for segmentation.
Fig. 20. Image of different paperboards with daylight illumination: paperboard A (right),
paperboard B (middle) and paperboard C (left)
420 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 23
(A) (B)
(C) (D)
Fig. 21. Merged spectra of paperboard A (A), B (B) and C (C). (D) shows the mean spectra of
each paperboard.
4.2.2 Hardware optimization
According to the results of the spectral analysis we choose two different illumination
congurations. The rst uses the amber LED with a spectrum shown in Fig. 7 (red curve)
which is expected to result in low classication error rates and hence to high SNR. The
other conguration uses the red LED with a spectrum shown in Fig. 7 (yellow curve) which
maximumis located at a high classication error wavelength. Further we use the same camera
(A) (B)
Fig. 22. Classication error of paperboard A versus B and C for parametric density
estimation (A) and nonparametric density estimation (b)
421 Optimization of Optical Inspections Using Spectral Analysis
24 Will-be-set-by-IN-TECH
(A) (B)
Fig. 23. Images using optimized hardware setup (A) and non-optimized hardware setup (B)
showing paperboard A (bottom), B (middle), and C (top)
and optics for both congurations, focussing on optimization of the lightsource only. The
resulting monochrome images are shown in Fig. 23 with the upper paperboard is class C, the
middle class B and the lower class A. The images look similar but class B appears darker and
class A brighter in the optimized setup (Fig. 23 (A)) than in the non-optimized setup (Fig.
23 (B)). In order to measure the image quality we calculate the SNR between paperboard A
and the others. The parameters needed are calculated on regions containing the respective
object using (38) and (39). The results for parameter estimations are given in Table 4. With
these parameters three SNRs are calculated, expressing the separability between paperboard
A and B, A and C, and A and B, C together. The values are shown in Table 3. While the
SNR between A and C does not increase, the other two SNRs increase signicantly using the
optimized setup. With the non-optimized setup the SNR between paperboard A and B is very
low with 30dB increasing with the optimized setup to 15dB. The overall SNR between A
and both other paperboards increases from26dB to 18dB. It can be seen that the results of
the spectral analysis correlate with the image quality of the real images.
Objects SNR
dB,opt
[dB] SNR
dB,nonopt
[dB]
A vs B -15 -30
A vs C -21 -21
A vs B,C -18 -26
Table 3. SNR of the different congurations
Optimized Non-Optimized
Object
2
2
A 127.0 42.3 113.2 37.2
B 111.4 41.0 115.3 34.8
C 119.3 47.6 120.5 44.9
Table 4. Statistical parameters for different hardware congurations
422 Quality Assurance and Management
Optimization of Optical Inspections Using Spectral Analysis 25
5. Conclusion
In this Chapter we introduced a method for optimization of hardware component selection
based on spectral analysis with respect to image quality. The complete image acquisition chain
including lightsource, observed scene, optics, camera and the inuence on the resulting image
was illustrated. The spectral behavior for different types of all components were provided.
Models of the spectral characteristics were derived. This lead to an image output model which
describes the sensor output signal depending on the components.
Furtheron a spectral analysis measurement setup and its usage was explained focussing on
the diffuse reection behavior of different objects. Two measures for image quality according
to segmentation were introduced afterwards: the rst is based on signal to noise ratio and
the second uses the estimation of classication error by means of analyzing different density
estimators.
Finally experimental results for simulated and real data are provided. The rst contains
eight different setups of simulated components including lightsources, objects, optics and
cameras. All combinations of these components were evaluated and resulted in a big
variation of image quality as shown by quality measures and simulated images. For the
experiments with real data three different types of paperboards with similar appearances
were analyzed and an optimal conguration in terms of lightsources was compared with a
non-optimal conguration. The spectral optimization increases image quality signicantly.
Both experiments proved the advantages of hardware component selection due to its spectral
characteristics and the spectral behavior of objects in the observed scene.
6. Acknowledgement
This work is part of a project which is supported by the European Union, the European
Funds for Regional Development (EFRE), the German Federation and the Federal Land
Schleswig-Holstein.
7. References
Basler A601f, A602f, and A622f - Small, Powerful, Easy to Use,
http://www.baslerweb.com/downloads/11684/6S_A601f_602f_622f_151208.pdf,
August -2011
Duda, R.O.; Hart, P.E.; Stork, D.G (2001). Pattern classication, Wiley New York, 2001
Duff, T. (1979). Smoothly shaded renderings of polyhedral objects on raster displays,
Proceedings of the 6th annual conference on Computer graphics and interactive techniques,
pp. 270275, 1979, ACM
Eriksson, M. (2006). A light manager for a dynamic light environment, Sweden
Eskicioglu, A.M. & Fisher, P.S. (1995). Image quality measures and their performance.
Communications, IEEE Transactions on, 43, 12, 1995 29592965
He, X.D.; Torrance, K.E.; Sillion, F.X.; Greenberg, D.P.. A comprehensive physical model for
light reection. ACM SIGGRAPH Computer Graphics, 25, 4, 1991 175186
Goodrich (2006), Application Note: What is InGaAs,
http://www.sensorsinc.com/downloads/notes_GaAs.pdf, December -2006
Jenoptik (2007), VIS - NIR color corrected hyperspectral lens introduced for VisGaAs sensor,
http://www.jenoptik-inc.com/literature/doc_download/6-3-hyperspectral-
lens.html, March -2007
423 Optimization of Optical Inspections Using Spectral Analysis
26 Will-be-set-by-IN-TECH
Jenoptik (2011),UV CoastalOpt SLR Lens,
http://www.jenoptik.com/cms/jenoptik.nsf/res/CoastalOpt%20UV%
20105_V2.pdf, August -2011
Kajiya, J.T. & Kay, T.L. (1998). Rendering fur with three dimensional textures. ACM Siggraph
Computer Graphics, 23, 3, 1989 271280
Lambert, J.H. (1760). Colorum Umbrae, Eberhard Klett, 1760
Lewis, R.R. (1994). Making shaders more physically plausible. Computer Graphics Forum, 13, 2,
1994 109120
Newport (2011), Optical Materials,
http://www.newport.com/Optical-Materials/144943/1033/content.aspx, August
-2011
Oren, M. & Nayar, S.K. (1994). Generalization of Lamberts reectance model, In: Proceedings
of the 21st annual conference on Computer graphics and interactive techniques, 239246,
ACM
Philips (2011), Luxeon Rebell General Purpose Technical Datasheet DS64,
http://www.philipslumileds.com/uploads/28/DS64-pdf, April -2011
Phong, B.T. (1975). Illumination for computer generated pictures. Communications of the ACM,
18, 6, 1974 311317
Rechtsteiner , G.A. & Ganske, J.A. (1998). Using natural and articial light sources to illustrate
quantum mechanical concepts. The Chemical Educator, Vol3 , No. 4, 1998, 112
Richards, A. (2006). UV imaging opens new applications,
http://www.vision-systems.com/articles/print/volume-11/issue-7/features/
component- integration/ uv-imaging-opens-new-applications.html ,July -2006
Schneider (2011), CINEGON 1.4/8MM COMPACT - Relative Illumination, Distortion,
Transmittance - graphs and data (PDF),
http://www.schneiderkreuznach.com/industrieoptik_e/kompakt/pdf/
CNG_KOMP_14_8 _ R46045_obj.pdf, August -2011
Schneider (2011), VARIOGON 1.8/12.5-75MM - Relative Illumination, Distortion,
Transmittance - graphs and data (PDF), http://www.1stvision.com/ lens/
schneider/ dataman/VGN_18_125_75_R34030_1CIE.pdf, August -2011
Scott, D.W. (1992). Multivariate density estimation, Wiley Online Library, 1992
Wald, G. (1945). Human Vision and the Spectrum. Science, Vol101 , No. 2635, June -1945,
653-658
Wand, M.P. & Jones, M.C. (1995). Kernel smoothing, Chapman & Hall/CRC, 1995
Wang, Z. &Bovik, A.C. (2002). Auniversal image quality index. Signal Processing Letters, IEEE,
9, 3, 2002 8184
Wikipedia (2007),
http://upload.wikimedia.org/wikipedia/commons/4/4c/Solar_Spectrum.png,
August -2007
Wikipedia (2010),
http://upload.wikimedia.org/wikipedia/commons/c/c4/Rendered_Spectrum.png,
January -2010
Wikipedia (2009),
http://upload.wikimedia.org/wikipedia/commons/thumb/a/a2/Wiens_law.svg/
300px- Wiens_law.svg.png, April -2009
Wikipedia (2011), http://upload.wikimedia.org/wikipedia/commons/7/78/
Spectra-Philips_32T8_natural_sunshine_uorescent_light.svg, Mai -2011
424 Quality Assurance and Management