Miniature Aluminum Electrolytic Capacitors NRSK Series

ULTRA LOW IMPEDANCE AT HIGH FREQUENCY, RADIAL LEADS,

POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
FEATURES Compliant
• VERY LOW IMPEDANCE includes all homogeneous materials

• LONG LIFE AT 105°C (Up to 4000 hrs)

*See Part Number System for Details
• HIGH STABILITY AT LOW TEMPERATURE
• IDEALLY SUITED FOR USE IN SWITCHING POWER SUPPLIES &
..CONVERTORS
CHARACTERISTICS
Rated Voltage Range 6.3 ~ 25
Rated Capacitance Range 470 ~ 3,300μF
Operating Temp. Range -40°C ~ +105°C
Capacitance Tolerance ± 20% (M)
Max. Leakage Current
0.03CV
After 2 Minutes @ 20°C
W.V. 6.3 10 16 25
Surge Voltage Ratings
S.V. 8 13 20 32

Maximum Tan δ
(see specifications table for Tan δ @ 20°C/120Hz 0.22 0.19 0.16 0.14
values above 1,800μF)

Low Temperature Stability Z -25°C/Z +20°C 2 2 2 2

(Impedance Ratio @ 120Hz) Z -40°C/Z +20°C 3 3 3 3
Load Life Test @ Rated W.V. & 105°C Capacitance Change Within ± 25% of initial measured value
2,000 hours for 8x11.5, 8x16,
10x12.5 and 10x16 Tan δ Less than 200% of the specified maximum value
3,000 hours for 8x20
4,000 hours for 10x20, 10x23 Leakage Current Less than specified maximum value

STANDARD PRODUCT AND CASE SIZE TABLE DΦ x L (mm)

Cap Working Voltage (Vdc)
Code
(μF) 6.3 10 16 25
220 221 - - - 8x11.5
- - - 8x11.5
330 331
- - - 10x12.5
- - - 8x20
470 471 - - - 10x12.5
- - 8x11.5 10x16
8x16 10x16
680 681 - 8x11.5
10x12.5 10x20
820 821 8x11.5 - - -
8x16 8x20
1000 102 8x11.5 10x23
10x12.5 10x16
1200 122 8x16 - - -
8x20 8x20
1500 152 10x20 -
10x12.5 10x16
1800 182 10x16 10x20 10x23 -
2200 222 10x20 10x23 - -
3300 332 10x23 - - -

DIAMETER AND LEADSPACE (mm) Polarity Marking Insulation Sleeve dφ ± 0.05

Case Dia. (Dφ) 8 10

Lead Dia. (dφ) 0.6 0.6 F ± 0.5
Lead Spacing (F) 3.5 5.0
Dim. α 0.5 0.5
L + β max. 4mm Dφ ± α
β = L < 16mm = 1.5mm, L > 20mm = 2.0mm
15mm Min.
Min.

Drawing is representative of parts as supplied in bulk or straight

lead format, please see taping specifications for details on taped
format packaging.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

179
 Miniature Aluminum Electrolytic Capacitors NRSK Series
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
Cap. W.V. Dissipation Factor Ripple Current Rating (mA) Max. ESR (Ω) Load Life Hours
Part Number
(μF) (Vdc) +20°C/120Hz +105°C/100KHz +20°C/100KHz @+105°C
NRSK821M6.3V8X11.5F 820 0.22 1140 0.036 2,000
NRSK102M6.3V8X11.5F 1000 0.22 1140 0.030 2,000
NRSK122M6.3V8X16F 1200 0.22 1490 0.028 2,000
NRSK152M6.3V8X20F 1500 0.22 1870 0.019 3,000
NRSK152M6.3V10X12.5F 1500 0.22 1540 0.026 2,000
6.3
NRSK152M6.3V10X16F 1500 0.22 2000 0.018 2,000
NRSK182M6.3V8X20F 1800 0.22 1950 0.016 3,000
NRSK182M6.3V10X16F 1800 0.22 2000 0.019 2,000
NRSK222M6.3V10X20F 2200 0.24 2550 0.013 4,000
NRSK332M6.3V10X23F 3300 0.26 2800 0.012 4,000
NRSK471M10V8X11.5F 470 0.19 1140 0.030 2,000
NRSK681M10V8X11.5F 680 0.19 1140 0.036 2,000
NRSK102M10V8X16F 1000 0.19 1490 0.028 2,000
NRSK102M10V10X12.5F 1000 0.19 1540 0.026 2,000
NRSK122M10V8X20F 1200 10 0.19 1870 0.019 3,000
NRSK152M10V8X20F 1500 0.19 1870 0.019 3,000
NRSK152M10V10X16F 1500 0.19 2000 0.019 2,000
NRSK182M10V10X20V 1800 0.19 2550 0.013 4,000
NRSK222M10V10X23 2200 0.21 2800 0.012 4,000
NRSK331M16V8X11.5F 330 0.16 1140 0.030 2,000
NRSK471M16V8X11.5F 470 0.16 1140 0.036 2,000
NRSK681M16V8X16F 680 0.16 1490 0.028 2,000
NRSK681M16V10X12.5F 680 0.16 1540 0.026 2,000
16
NRSK102M16V8X20F 1000 0.16 1870 0.019 3,000
NRSK102M16V10X16F 1000 0.16 2000 0.019 2,000
NRSK152M16V10X20F 1500 0.16 2550 0.013 4,000
NRSK182M16V10X23F 1800 0.16 2800 0.012 4,000
NRSK221M25V8X11.5F 220 0.14 1110 0.030 2,000
NRSK331M25V8X11.5F 330 0.14 1080 0.032 2,000
NRSK331M25V10X12.5F 330 0.14 1440 0.025 2,000
NRSK471M25V8X20F 470 0.14 1820 0.018 3,000
NRSK471M25V10X12.5F 470 25 0.14 1390 0.027 2,000
NRSK471M25V10X16F 470 0.14 1920 0.020 2,000
NRSK681M25V10X16F 680 0.14 1830 0.022 2,000
NRSK681M25V10X20F 680 0.14 2180 0.016 4,000
NRSK102M25V10X23F 1000 0.14 2180 0.016 4,000

PART NUMBERING SYSTEM

NRSK 102 M 16V 10x16 TB F
RoHS Compliant
Tape and Box*
Size (D∅ x L)
Rated Voltage
Tolerance Code
Capacitance Code
Series
*see tape specification for details

PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [email protected]

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

180
 Miniature Aluminum Electrolytic Capacitors Taping Specifications

STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB

Taping Dimensions (mm)
Case Dia.
4 5 6.3 8 P2 P
(Dφ)
Case Size 4x5 5x5 6.3x5
5x11 6.3x11 8x11.5
Dim. 4x7 5x7 6.3x7
∅D
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0 w2 P1
F +0.8 ~ -0.2 5.0 -02 ~ +0.8
F ∅d
W H0 H
P 12.7 ±1.0 w0
w
P0 12.7 ±0.2
P1 3.85 ±0.5 (at end of tape)
0
P
2
6.35 ±1.0 Δh
P0 S ∅D
W 18.0 ±0.5 0

W0 11.5 min.
W1 9.0 ±0.5
W2 0 ~ 2.5 1max

H0 16.0 ±0.5
I 1.0 max.
D 0φ 4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
t
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
Taping Dimensions (mm)
Case Dia.
10 12.5
(Dφ)
Case Size Δh
All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4* 1max
P0 12.7 ±0.2
P 3.85
1
P 6.35 ±1.0
2
W 18.0 ±0.5
W 11.5 min
0
W
1
9.0 ±0.5 P2 t P
W2 0 ~ 2.5
H0 16.0 ±0.5 ∅D
I 1.0 max.
D0φ 4.0 ±0.2 w2 P1 F ∅d H
Δh 0 ±1.0 (at top of can)
W1
t 0.7 ±0.2 (not including lead) w w0
*Optional Taping Specifications
10mm diameter available with P dim. = 12.7mm
(P/N Suffix: TB12.7MMP)
0
P0 S ∅ D0
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffix: TB15MMP)

NOTE: ANODE (+) LEAD FEEDS OFF FIRST.

FOR OPTION OF NEGATIVE (_) LEAD FIRST,
SPECIFY “TBN”.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

198
Miniature Aluminum Electrolytic Capacitors Taping Specifications

SPECIAL RADIAL TAPING (2.5mm LEAD SPACING, FORMED LEADS) TBF1

Taping Dimensions (mm)
Case Dia.
4 5
(Dφ)
Case Size 4x5 5x5 Δh
5x11 P2 P
Dim. 4x7 5x7
dφ ±0.05 0.45 0.45 0.5
H ±0.75 17.5 17.5 18.5 ∅D
H0 ±0.5 16.0 - - 1max
w2 P1
F 2.5 -02 ~ +0.8 F ∅d
P 12.7 ±1.0
W H0 H
P0 12.7 ±0.2 w w0
P1 5.1 ±0.5
P2 6.35 ±1.0
W 18.0 ±0.5 0
W0 11.5 min.
P0 S ∅D t
0
W1 9.0 ±0.5
W2 0 ~ 1.5
I 1.0 max.
D0φ 4.0 ±0.2
Δh 0 ±1.0
t 0.7 ±0.2

SPECIAL STRAIGHT LEAD TAPING TBST

Taping Dimensions (mm)
Case Dia.
(Dφ)
4 5 6.3 8 Δh
Case Size 4x5 5x5 6.3x5
5x11 6.3x11 8x11.5
Dim. 4x7 5x7 6.3x7
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
1max
F +0.8 ~ -0.2 2.0* 2.0 2.0 2.5 2.5 3.5
P ±1.0 12.7 ±0.2
P0 12.7 ±0.2
P1 5.1 5.1 5.1 5.1 5.1 4.6
P2 6.35 ±1.0
W 18.0 ±0.5
W0 11.5 min. P2 t P
W1 9.0 ±0.5
W2 0 ~ 2.5 ∅D
H0 16.0 ±0.5
w2 P1
I 1.0 max. F ∅d H
D 0φ 4.0 ±0.2 W1
w w0
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
* Parts with 4mm diameter are taped with a slight flare in the 0
lead and a 2.0mm lead-space.
P0 S ∅ D0

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

199
 Miniature Aluminum Electrolytic Capacitors Taping Specifications

RADIAL TAPED PACKAGING

Ammo Box (Tape & Box) TB, TBF1, TBST

Size of box and component quantity
Ammo Box Dimensions (mm) Q'ty per
Case Dia (Dφ) Dim.
Box Dim. L Dim. H
or Case Size W
Scored corner (pcs)
4x5, 4x7 2,000 331 175 43
5x5, 5x7 2,000 331 220 43
5x11 2,000 340 255 55
Label 6.3x5, 6.3x7 2,000 331 280 43
⊕
- H 6.3x11 2,000 331 280 48
8x11.5, 8x12.5 1,000 335 235 53
10x12.5* 500 335 190 53
10x16* 500 335 300 53
W
L 10x20* 500 335 300 55
12.x20* 500 335 300 55
12.5x25* 500 335 300 61
*Special Taping Consult Factory For Availability

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

200