Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    CASE 1 - e 0: This Sheet Is Not Valid. See Case 4

    Uploaded by

    dekoakira
    This document appears to be engineering calculations for the design of column base plate connections. It includes: - Calculations of maximum moments (M1 and M2) based on applied load (P) and plate geometry - Checking of allowable plate stresses against calculated stresses - Determination of required plate thickness (tp) which is noted to be too large - Recommendation to use plate stiffeners instead of increasing plate thickness further

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content

    CASE 1 - e 0: This Sheet Is Not Valid. See Case 4

    Uploaded by

    dekoakira
    22 views1 page
    This document appears to be engineering calculations for the design of column base plate connections. It includes: - Calculations of maximum moments (M1 and M2) based on applied load (P) and plate geometry - Checking of allowable plate stresses against calculated stresses - Determination of required plate thickness (tp) which is noted to be too large - Recommendation to use plate stiffeners instead of increasing plate thickness further

    Original Description:

    Original Title

    diseño de plancha base

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document appears to be engineering calculations for the design of column base plate connections. It includes: - Calculations of maximum moments (M1 and M2) based on applied load (P) and plate geometry - Checking of allowable plate stresses against calculated stresses - Determination of required plate thickness (tp) which is noted to be too large - Recommendation to use plate stiffeners instead of increasing plate thickness further

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    22 views1 page

    CASE 1 - e 0: This Sheet Is Not Valid. See Case 4

    Uploaded by

    dekoakira
    This document appears to be engineering calculations for the design of column base plate connections. It includes: - Calculations of maximum moments (M1 and M2) based on applied load (P) and plate geometry - Checking of allowable plate stresses against calculated stresses - Determination of required plate thickness (tp) which is noted to be too large - Recommendation to use plate stiffeners instead of increasing plate thickness further

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    of 1

    PROYECTO CLIENTE ESTRUCTURA

    XXXXXXXX XXXXXXXX XXXXXXXX

    CALCUL: REVIS: APROB: FECHA:

    X.X X.X X.X XX/XX/XX

    DISEO DE CONEXIONES

    PLANCHA BASE DE COLUMNA -ASD

    CASE 1 - e=0

    THIS SHEET IS NOT VALID. SEE CASE 4

    "VALID CASE FOR DESIGN" THIS SHEET IS NOT VALID. SEE CASE 2 THIS SHEET IS NOT VALID. SEE CASE 3 THIS SHEET IS NOT VALID. SEE CASE 4 THIS SHEET IS NOT VALID. SEE CASE 5

    0,95d

    m 0,8bf n

    fp = P/A

    fp = P/A

    M1

    M1

    M2

    M2

    Moment Diagram (x) A1 = A2 = fp max = 0,70*f'c = 196


    0,5

    Moment Diagram (y) 35*35 = 40*40 = kg/cm2 0,35*f'c*(A2/A1)0,5 = 112 kg/cm2 < 0,70*f'c OK 1225 1600 cm2 cm2

    fp (allowed) = 0,35*f'c*(A2/A1) fp (allowed) = 112

    kg/cm2 kg/cm2 0,8bf = n= kg-cm OK 10.00 cm 12.50 cm 638 kg-cm

    fp = 10000 / 1225 = 8.16 0,95d = m= 16.63 cm 9.19 cm 345 kg-cm

    M1 = fp*m2/2 =

    M2 = fp*n2/2 =

    M max = Fb =

    638

    0,75*Fy =

    1898

    kg/cm2

    tp = 6M /(0,75Fb*b) =
    THICKNESS PLATE IS BIG !

    tp =

    14

    mm
    THICKNESS PLATE IS BIG ! USE STIFFENER

    You might also like