Professional Documents
Culture Documents
04 - Disassembly & Reassembly
04 - Disassembly & Reassembly
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components.
Cautions: 1. Disconnect the monitor from the power source before disassembly.
1. Place LCD TV face down on cushioned table. Remove 9 screws from the rear cover. Remove 4 screws from grip on the stand. and remove the stand.
3. Remove 3 screws and lift up the jack cover. Disconnect speaker cable, function cable from the board.
4. Remove 13 screws from the shield and lift up the power board.
3-1
3. Remove 3 screws and lift up the jack cover. Disconnect speaker cable, function cable from the board.
3-2
3 Disassembly and Reassembly 4. Remove 10 screws from the shield and lift up the power board.
7. Remove 9 screws from the shield and lift up the shield panel.
3-3
2. Lift up the rear-cover and remove 3 screws from the Jack cover.Remove 12 screws from The board.
3.
Remove 12 screws from The board.Disconnect speaker cable, function cable LVDS cable and lift up the main board and power board.
4.
5.
6.
3-4
3-3 Reassembly
Reassembly procedures are in the reverse order of dissasembly procedures.
3-5
Memo
3-6