The document is a training prospectus from the Lifting Equipment Engineers Association (LEEA) that outlines their individual trainee scheme and various training courses. It provides details on:
1. Different training methods including correspondence courses, online courses, and on-site intensive programs.
2. An introductory 1-day lifting equipment familiarization seminar for those new to the industry.
3. A 2-day Part 1 entrance certificate course that is a prerequisite for further certification.
4. Various lifting equipment diploma courses that provide qualifications, including courses on general lifting equipment, manually operated lifting machines, and powered lifting machines.
The document is a training prospectus from the Lifting Equipment Engineers Association (LEEA) that outlines their individual trainee scheme and various training courses. It provides details on:
1. Different training methods including correspondence courses, online courses, and on-site intensive programs.
2. An introductory 1-day lifting equipment familiarization seminar for those new to the industry.
3. A 2-day Part 1 entrance certificate course that is a prerequisite for further certification.
4. Various lifting equipment diploma courses that provide qualifications, including courses on general lifting equipment, manually operated lifting machines, and powered lifting machines.
The document is a training prospectus from the Lifting Equipment Engineers Association (LEEA) that outlines their individual trainee scheme and various training courses. It provides details on:
1. Different training methods including correspondence courses, online courses, and on-site intensive programs.
2. An introductory 1-day lifting equipment familiarization seminar for those new to the industry.
3. A 2-day Part 1 entrance certificate course that is a prerequisite for further certification.
4. Various lifting equipment diploma courses that provide qualifications, including courses on general lifting equipment, manually operated lifting machines, and powered lifting machines.
Document reference LEEA 036 dated 22 nd October 2013
~~~~
Published by the LIFTING EQUIPMENT ENGINEERS ASSOCIATION 3, Osprey Court, Kingfisher Way, Hinchingbrooke Business Park, Huntingdon PE29 6FN United Kingdom Tel: + 44 (0) 1480 432801 Fax: + 44 (0) 1480 436314 E-mail: [email protected]
www.leeaint.com
Postal Correspondence On-Line Portal LEEA HQ (Huntingdon, UK) International (On-site) UK (On-site) Specialist Modules & Bespoke Training SM6 MEWPS Examination (1a, 3a & 3b Categories) SM12 Electric Overhead Travelling Cranes (Servicing) BS Bespoke Courses Part 1 Entrance Certificate Course Lifting Equipment General Lifting Machines Manual Lifting Machines Power Runways & Crane Structures Offshore Containers Design, Construction, Testing, Examination & Marking LEEA DIPLOMA LEEA CERTIFICATE O n c e
a
D i p l o m a
h a s
b e e n
a t t a i n e d ,
t h e
T E A M
C A R D
w i l l
b e
i s s u e d .
A d d i t i o n a l
D i p l o m a s
c a n
b e
a d d e d
t o
t h e
T e a m
C a r d D i p l o m a s
c a n
b e
t a k e n
i n
A N Y
o r d e r Not available to Individual Trainees Test & Examine Qualifications
The Part 1 Entrance Certificate is a prerequisite training course that must be achieved before progressing to LEEA Diploma level qualifications. The Part 1 Entrance Certificate is NOT a qualification.
The LEEA Diploma is a qualification in your chosen subject. The Diplomas can be taken in any order.
Specialist Module and Bespoke training courses are designed as supplementary training courses that complement the Diploma qualifications. Delegates that successfully complete the training courses will be awarded a LEEA Certificate.
Methods of Training
Distance Learning options are available for the Part 1 Entrance Certificate and Diplomas (excluding Offshore Containers). There are two options available:
1) Postal Correspondence (CC)
Or
2) On-Line via the LEEA Training Portal (OL)
(IP) Intensive Programme (attendance) courses can be delivered internationally at the members premises, or at our purpose built Training Centre at LEEA Huntingdon offices. These include Part 1 Entrance Certificate, Bespoke Training and Diplomas (excluding Overhead Travelling Cranes).
(SM) Specialist Module training courses are usually carried out at the LEEA Training Centre in Huntingdon, UK as they involve practical elements of training with specialist tools and equipment.
(BS) Bespoke Courses - We will be pleased to consider any requests for special courses to suit a member's particular needs. Also if a member wishes to book all places on a course exclusively for their employees, the content can be varied to suit their requirements, including off-hire inspection of slings, manually operated lifting machines and lifting accessories.
The 1-Day Lifting Equipment Familiarisation Seminar
The IPF Lifting Equipment Familiarization seminar is designed to provide underpinning information for people new to the industry or others that may be wish to develop their understanding of the equipment and terminology in order to supplement their current understanding whilst working in non-engineering type roles in the industry. The seminar does not include any inspection criteria, requirements of relevant standards or engineering procedures involved with lifting equipment.
Course Syllabus:
1.1 Welcome & Introductions 1.11 Eyebolts 1.2 Introduction to the LEEA 1.12 Feedback Session 1.3 Key Legislation 1.4 Standards and Codes of Practice 1.5 Appliances & Accessories 1.6 Lifting Machines 1.7 Chain Slings 1.8 Wire Rope Slings 1.9 Textile Slings 1.10 Shackles
The seminar is structured to take place over 1 day and a certificate of attendance will be issued to all delegates on completion.
Current availability: Intensive Programme (IP UK on-site, Huntingdon HQ and Overseas) from December 2013 Join us at the LEEA exhibition stand at Liftex 2013 for our official launch of this new training course Minimum number of delegates for on-site training = 10
The Part 1 Entrance Certificate
The Part 1 Entrance Certificate is the basic level training course offered by the LEEA. It is a prerequisite for studying at Diploma level. The course does not include visual inspection criteria.
Course Syllabus:
1.1 The Law 1.11 Components 1.2 Standards and Codes of Practice 1.12 Chain Slings 1.3 Materials 1.13 Wire Rope Slings 1.4 Methods of Manufacture 1.14 Shackles 1.5 Stress and Strain in Lifting 1.15 Eyebolts 1.6 Destructive and Non-Destructive Testing 1.16 Textile Slings
1.7 Verification of Lifting Equipment 1.17 Mechanics - Simple Machines 1.8 Chains for Lifting Purposes 1.18 Feedback Session 1.9 Wire Rope Construction 1.10 Revision Assignment
The course is a 2 day course, structured to take place over 3 days in order to allow for delegate travelling time on the morning of day 1 and the afternoon of day 3 (with a final examination for the Certificate on day 3). Please see course times below the table of scheduled courses below.
This foundation course does not offer a LEEA qualification for inspection or examination of lifting equipment but must be completed before a delegate can undertake the Diploma or Specialist Module courses.
Current availability: On-Line (OL), Correspondence (CC), Intensive Programme (IP UK on-site, Huntingdon HQ and Overseas)
Lifting Equipment General Diploma
Delegates will benefit from hands-on practical training to complement the essential theory sessions. The Diploma is based on lifting accessories and includes thorough examination procedures and criteria for continued periods of service.
Course Syllabus:
2.1 The Law 2.11 Eyebolts 2.2 Stress and Strain in Lifting Equipment 2.12 Shackles 2.3 Heat Treatment 2.13 Chain Slings 2.4 Vectors and Forces 2.14 Wire Rope Slings 2.5 Rating of Lifting Gear for General Purposes 2.15 Textile Slings 2.6 Verification of Lifting Gear 2.16 Practical Assignment 2.7 Chain for Lifting Purposes 2.17 Plate Clamps 2.8 Wire Rope 2.18 Lifting Beams 2.9 Practical Assignment 2.19 Lifting Crane Forks and C-Hook 2.10 Components for Slings 2.20 Feedback Session
The course is structured to take place over a 5 day period. UK and International on-site LEG Diploma courses will require certain accessories being available for practical sessions. These can be shipped by the LEEA at the request of the member company subject to carriage charges.
Current availability: On-Line (OL), Correspondence (CC), Intensive Programme (IP UK on-site, Huntingdon HQ and Overseas)
Lifting Machines Manual Diploma
Delegates will benefit from hands-on practical training to complement the essential theory sessions. The Diploma is based on manually operated lifting machines and includes thorough examination procedures and criteria for returning items to service.
Course Syllabus:
3.1 The Law 3.11 Revision Assignment 3.2 Verification of Lifting Equipment (Testing & Examination) 3.12 Wire Rope 3.3 Mechanics Simple Machines 3.13 Jaw Winches 3.4 Pulley Blocks 3.14 Winches 3.5 Practical Assignment 3.15 Practical Assignment 3.6 Chain for Lifting Machines 3.16 Mechanical Jacks 3.7 Screw Brake Mechanisms (Chain & Lever Hoists) 3.17 Hydraulic Jacks 3.8 Hand Operated Chain Blocks 3.18 Practical Assignment 3.9 Lever Hoists 3.19 Site Procedures 3.10 Trolleys 3.20 Feedback Session
The course is structured to take place over a 5 day period. UK and International on-site LMM Diploma courses will require certain accessories being available for practical sessions. These can be shipped by the LEEA at the request of the member company subject to carriage charges.
Current availability: On-Line (OL), Correspondence (CC), Intensive Programme (IP UK on-site, Huntingdon HQ and Overseas)
Lifting Machines Power Diploma
Delegates will benefit from hands-on practical training to complement the essential theory sessions. The Diploma is based on powered lifting machines and includes thorough examination procedures and criteria for returning items to service.
Course Syllabus:
4.1 The Law 4.11 Brakes (Sliding Rotor Principle) 4.2 Standards and Codes of Practice 4.12 Disc Brakes (Disk Type) 4.3 Examination and Testing Procedures 4.13 Electric Hoist Motors 4.4 Accessories (1) 4.14 Pneumatic Hoists (1) 4.5 Accessories (2) 4.15 Pneumatic Hoists (2) 4.6 Travelling Trolleys 4.16 Hoist Construction 4.7 Power Feed Systems 4.17 Reeving and Rope Guides 4.8 Electrical Circuits in Power Hoists 4.18 Chain Hoists 4.9 Limit Switches and Devices 4.19 Feedback Session 4.10 Overload Devices for Electrical Hoists
The course is structured to take place over a 5 day period. UK and International on-site LMP Diploma courses will require certain accessories being available for practical sessions. These can be shipped by the LEEA at the request of the member company subject to carriage charges.
Current availability: On-Line (OL), Correspondence (CC)
Runways & Crane Structures Diploma
Delegates will benefit from hands-on practical training to complement the essential theory sessions. The Diploma is based on runway beams, jib and mobile gantry cranes and structures, including thorough examination procedures and criteria for returning items to service.
The course is structured to take place over a 5 day period. UK and International on-site RCS Diploma courses will require certain equipment being available for practical sessions. These can be shipped by the LEEA at the request of the member company subject to carriage charges.
Current availability: On-Line (OL), Correspondence (CC), Intensive Programme (IP Huntingdon HQ, UK & Overseas On -Site)
Overhead Travelling Cranes Diploma
The Diploma focuses on overhead, portal and semi-portal cranes and includes thorough examination procedures and criteria for returning items into service. This Diploma is only available to delegates that have already gained the LEEA Course 4 - Lifting Machines Power Diploma qualification.
Course Syllabus:
6.1 The Law 6.11 Braking systems 6.2 Standards and Codes of Practice 6.12 Motors and variable frequency drives 6.3 Materials used for construction 6.13 Safety Precautions & Preparations for examinations 6.4 Construction types/methods 6.14 Site examination for theoretical checking 6.5 Hoist Construction 6.15 The Thorough Examination 6.6 Under-slung Travelling Trolleys 6.16 Testing as part of the Thorough Examination 6.7 Wire Ropes 6.17 Support Structure Alignment 6.8 Power Feed Systems 6.18 Bibliography & References 6.9 Limit Switches and Devices 6.19 Feedback Session 6.10 Overload Protection
The course is structured to take place over a 5-day period. UK and International on-site OTC Diploma courses will require certain equipment being available for practical sessions. These can be shipped by the LEEA at the request of the member company subject to carriage charges.
Current availability: On-Line (OL), Correspondence (CC)
Offshore Containers Diploma - (Design, Construction, Testing, Examination & Marking) This 5 day, comprehensive Diploma course is available to delegates that already possess the LEEA Lifting Equipment General Diploma. The course will provide theoretical training in relation to the current regulations, standards and the requirements of persons carrying out testing, examination and marking of offshore containers with an overview of design and construction requirements.
Course Syllabus:
1 The Law 2 Overview of Work at Height regulations 3 Standards and Codes of Practice - EN ISO, DNV, CSC, IMDG, IMO
Current availability: Intensive Programme (IP UK on-site, Huntingdon HQ and Overseas)
SM6 MEWPs Examination (Self-propelled boom & scissor categories 1a, 3a and 3b) - ON REQUEST
This 3 day course is available to candidates that already possess the LEEA Lifting Equipment General and Lifting Machines Power Diplomas. The course will provide theoretical and practical training in relation to the current regulations and the requirements of persons carrying out thorough examinations of powered access equipment. Successful assessment provides suitable candidates with the valuable documentary evidence that they are certified to persons to plan, manage or carry out thorough examinations of platforms in the context of current legislation including the Work at Height Regulations, LOLER and PUWER 98. Course Syllabus:
1 The Law 11 Record Keeping 2 Overview of Work at Height Regulations 12 Definitions 3 Standards and Codes of Practice 13 LOLER Schedule 1 4 Persons carrying out Examinations 5 Checks and Inspections 6 Thorough Examination 7 MEWPS not in Regular Use 8 Testing 9 NDT Techniques 10 Maintenance Requirements Current availability: Intensive Programme (IP Huntingdon HQ) See notes and below Huntingdon Training Timetable (July to December 2014) C o d e
Course Title Course Length July Aug Sep Oct Nov Dec Price per delegate *(excluding VAT) The Basics Lifting Equipment Familiarisation Seminar 1 day 21 4 1 29 - 10 1 90 P1E Part 1 Entrance Certificate 2 days training over 3 days 2-4 23-25 5-7 26-28 2-4 15-17 30/09-2 21-23 11-13 25-27 8-10 485 LEG Lifting Equipment General Diploma 5 days 7-11 28-01/08 11-15
N/A = not available *VAT (where applicable) will be charged at the prevailing rate at time of invoice. The IP1 (Part 1 Entrance Certificate) course is held over three days: Day 1 : 1.00pm to 4.30pm, Day 2 : 9am to 4.30pm and Day 3 : 9am to 12.00pm. All other courses will commence at 9.00am and finish at 4.30pm (Monday to Thursday) and 9.00am to 3.45pm (Friday). Whenever possible we will endeavour to provide training on the preferred dates selected on the booking form. However places will be allocated on a first come basis. Please therefore indicate any acceptable alternative dates. Where overnight accommodation is required, members will be responsible for their own arrangements. There is a range of accommodation available within a short drive of the LEEA Training Centre and we will be pleased to provide contact details. Tea, coffee, water and soft drinks are available throughout the day; lunch is provided on all full training days.
Eligibility for the courses
There is no age restriction for entry to the Part 1 Entrance Certificate. Any employee of a member company who is aged 18 or more is eligible to attend course SM3 when available. There is no requirement to hold the Part 1 Entrance Certificate to enrol on the SM (Specialist Module) courses other than SM6 MEWPS Examination, which requires the delegate to hold both Lifting Equipment General and Lifting Machines Power LEEA Diplomas. In addition, the delegate must hold a valid IPAF Operators Licence for Scissor Lift (SL) and Self Propelled Boom (SPB), categories 3a and 3b.
Delegates with learning difficulties, e.g. Dyslexia, should inform our Training Administrator when making a course booking and also the Training Officer at the start of the training course. All such information will be in held in strict confidence.
Entrance to all Diploma courses is restricted to those that hold the Part 1 Entrance Certificate.
The Diploma training courses include a mixture of sessions in the classroom and workshop. Workshop sessions will involve handling used equipment. Delegates should therefore be cleanly dressed and bring a suitable overall and safety footwear for the practical sessions. Lockers are available for storage. Hand tools will be provided and it will be the responsibility of the delegate to ensure that all tools and equipment are returned to their respective location at the end of the practical sessions. Delegates attending the SM6 MEWPS Examination course must have their own safety harness, 1 metre restraint lanyard, hi -visibility jacket, toe protection footwear, overalls and safety helmet.
Terms and conditions
Credit Standard LEEA credit terms apply. Cancellations The following cancellation charges apply: Cancellation within 7 working days of the commencement of the course = 50% of the course fee. Cancellation within 2 working days of the commencement of the course = 100% of the course fee.
LEEA reserve the right to cancel courses if the number of delegates is insufficient for it to be viable to run a course.
Substitutes If a delegate becomes unavailable before the commencement of the course, a substitute may be nominated. Substitution once the course has commenced is not accepted.
Programme of courses
The programme set out in the training timetable is based on anticipated demand. However it can be varied according to demand, either by bespoke courses to suit a particular members needs, or if the general demand is seen to be different from that anticipated. Therefore, if the programme does not suit your needs, please contact the LEEA office and we will try to accommodate your requirements.
How to find us
Huntingdon is in Cambridgeshire, approximately 60 miles due North of central London. It is easily accessible by major road and rail networks and within a reasonable distance of Londons international airports.
Hinchingbrooke Business Park is located at Spittals Interchange where the A14 turns west before crossing the A1. A Marriott Hotel is clearly visible on the South West corner of the junction.
By rail
The nearest station is at Huntingdon and is on the main line North from Londons Kings Cross terminus. Taxis are available at the station.
By road
From all directions, take the A14 West from the interchange roundabout keeping to the left hand lane and IMMEDIATELY on leaving the roundabout, there is a slip road to the Hotel and Business Park. Follow the road past the Hotel, the security barrier and food factory. Osprey Court is on the left.
Hinchingbrooke Business Park
LIFTING EQUIPMENT ENGINEERS ASSOCIATION - TRAINING COURSES BOOKING FORM JAN JUL 2014
Student number (if known)
Use BLOCK CAPITALS
Trainee: Surname:
First name:
Date of birth (dd/mm/yy):
Company: Name (and branch if applicable):
Address:
Training contact:
Training contact Telephone number:
Training contact e-mail address:
Purchase order number:
Delegates with learning difficulties, e.g. Dyslexia, should inform our Training Administrator when making a course booking and also the Training Officer at the start of the training course. All such information will be in held in strict confidence. Place a tick in the box alongside the course(s) required No. Course name Tick course(s) required IPF Lifting Equipment Familiarisation Seminar IP1 Part 1 Entrance Certificate IP2 Lifting Equipment General Diploma IP3 Lifting Machines Manual Diploma IP4 Lifting Machines Power Diploma IP5 Runways and Crane Structures Diploma IP6 Overhead Travelling Cranes Diploma IP7 Offshore Containers Diploma
Preferred start date (see timetable of dates):
Acceptable alternative start dates:
Members located overseas please note: Payment must be made before the courses commence. It should be in Pounds Sterling net of all currency charges. The preferred method is by means of a credit or debit card. Credit/Debit card payment Please complete the details below. Card type (please indicate below). A surcharge of 3.50 is applicable to credit card transactions. If no card type indicated the surcharge will automatically be applied. MasterCard Visa Credit Visa Electron Maestro Solo JCB American Express Debit Card Card number: ________________________________________________________ Card expiry date: ___ / ___ Security code (last 3 digits in signature box) ____________ For Maestro and Solo cards the issue number or start date: Cardholders name (as on the card): Cardholders signature Return the enrolment form to: LIFTING EQUIPMENT ENGINEERS ASSOCIATION 3, Osprey Court, Kingfisher Way, Hinchingbrooke Business Park, Huntingdon PE29 6FN United Kingdom Tel: + 44 (0) 1480 432801 Fax: +44 (0) 1480 436314
The LEEA has gained CPD accreditation for IPF, IP1, IP2, IP3, IP7 and SM6 MEWPS training courses from the Continual Professional Development Certification Service. All accredited courses undergo a rigorous appraisal by the CPD service to ensure that they meet the exact criteria of professional training standards.
What is CPD?
It is the systematic maintenance, improvement and broadening of professional knowledge, understanding and skill and the development of personal qualities necessary to undertake professional and technical duties throughout the practitioners working life
Its taking a structured approach to life-long learning
Its about keeping up to date with new technical and business related subjects
Its about being even better at what you do
Its about skills and knowledge enhancement
With CPD accredited courses from LEEA, you can be assured of:
confidence in standards of performance higher quality, consistency and reliability of training turning good practice into best practice improved skill levels and performance