Professional Documents
Culture Documents
ISO 9001 Auditor Training Q&A
ISO 9001 Auditor Training Q&A
ISO 9001:2008
ISO 9001 Auditor Training - Typical multiple choice questions worth one mark each. Only
circle one answer for each question.
1 Planning for a QMS audit requires:
a. establishing an audit schedule.
b. determining the scope of the audit.
c. considering prior audit results.
d. reviewing quality system documentation.
e. all of the above.
2 The information sought by a QMS auditor during an audit is:
a. Senior management commitment to the quality system
b. A list of nonconformities against the ISO 9001 standard
c. Conformity to specified audit criteria
d. Product shipped met customer requirements
e. All of the above
3 An audit plan is:
a. a facilities layout
b. a description of the activities and arrangements for an audit
c. a checklist of questions to be asked during an audit
d. a) and b)
e. b) and c)
4 The main purpose of the program of scheduled QMS audits is to:
a. resolve the problems in production.
b. reduce in process verification.
c. verify the effective implementation of the quality management system.
d. all of the above.
e. b) and c).
7 The audit team members should meet frequently to exchange information during the
audit in order to:
a. ensure that all of the audit objectives are met.
b. ensure that as many nonconformities as possible are found.
c. evaluate the performance of each member of the team.
d. all of the above.
e. none of the above.
8 Internal audits are used to verify that:
a. products conform to technical specifications.
b. the quality management system is effectively implemented.
c. no nonconformities exist in the quality management system.
d. all of the above.
e. none of the above.
9 The frequency of third QMS party audits is determined by:
a. the Registrar and auditee
b. the Registrar and customer
c. the client
d. only a) and b)
e. only b) and c)
10 The primary purpose of an opening meeting is to
a. develop the plan for the audit.
b. introduce the audit team and confirm arrangements for conducting the audit.
c. determine what auditor and auditee resources are required to undertake the audit.
d. all of the above.
e. none of the above.
11 The evidence of a nonconformity identified during an audit should be
a. recorded in the auditors notes or checklist.
b. acknowledged by the management of the audited company.
c. capable of being checked later.
d. all of the above.
e. none of the above.
12 The output from management reviews of a QMS based on ISO 9001 should lead to
decisions or actions related to:
a. Improvement in the effectiveness of the quality management system
b. Improvement of product related to customer requirements
c. Increased efficiency in use of resources
d. Only a) and c)
e. Only a) and b)
13 The number of auditors assigned to an audit and their related experience and
qualifications should be dependent on:
a. the scope of the audit.
to avoid wasting material. Upon inquiring about his procedure, the auditor was shown the
inspectors copy of QAP 05, revision 2 on a shelf near the inspectors desk.
Situation number 2
In the ABC Inc, Medical Center, which is within the scope of QMS registration, the auditor
asks to see the work instructions for a nurse. There are no written instructions on how to
administer first aid treatment for cuts and minor injuries, nor are there any written
instructions of what to do if a patient's heart stops beating. The guide says that ABC
employs three nurses all of whom have been professionally trained as Registered Nurses
and have certificates of competence issued by a recognized university teaching hospital.
Situation number 3
In the Wardens office, the auditor notices a binder entitled Penal Institution Administration
Practices on the bookshelf and asked whether these contained departmental procedures
for the penitentiary. The warden confirms that the file does contain these procedures, but
adds hesitantly that this document is now on computer available to all supervisors at their
terminals for many of their activities. After selecting A2, B5, C3 and D4 from the binder, the
auditor notes that they are all at revision 1. The auditor asks the Warden to show them on
the terminal. The computer version of B5, C3 and D4 are at revision 3. The other sections
are at revision 1.
Situation number 4
In the maintenance department, the auditor notes that contrary to the companys work
instruction, TDWI 05 issue 3, which is clearly displayed at all work stations, three of the ten
people in the department are not wearing the company issued safety glasses when
operating machining equipment.
Situation number 5
In the purchasing department, the auditor notes that the staff are placing orders over the
phone with suppliers using a computerized purchasing system. On inquiry, the auditor is
told that the staff has been fully trained and the database holds details of all supplier
contract specifications and, therefore, there is no need for an independent review of
individual orders.
Situation number 6
In the quality managers office, the auditor asks to see the schedule for internal audits. This
schedule shows that each of the eight QMS processes are audited every six months. The
auditor asks the quality manager how the frequency of audits was decided. The manager
says that when the system was set up three years ago, 6-month intervals were specified for
all processes. The company has kept to this original schedule. The auditor asks to see the file
containing corrective action requests (CARs). It lists 85 CARs for the past two rounds of
internal audits. Of these, 65 CARs are in the production department and the remainder are
spread evenly over five other departments. Two departments received no CARs.
Situation number 7
In the shipping area, the auditor stops to look at six finished products, serial numbers X245
to X250, in individual cardboard cartons. The auditor asked the shipper why the items are
Situation number 13
In the production supervisors office, the auditor examined a copy of procedure SOP 7.5
covering production control activities. When comparing against the master copy, she
noticed that on page 2, the organization chart had been changed, but not on the master
copy.
When asked, the supervisor said that one of her material handlers had left the company and
was not replaced. Overall workload was reorganized and the organization chart was
amended to reflect this.
Situation number 14
In the Quality Management Representatives (QMR) office, the auditor flips through the
management review minutes for the past year. She noticed the last one was dated
28/11/08; the previous one dated 13/06/08 which made reference to a 22/02/08 review.
When asked about the frequency of such reviews, the QMR said that they were done when
senior management is in town and definitely before an external audit. On reviewing 2007
records, the auditor noticed that management reviews were held in May and October.
Exam Exercise 4 - Short Essay Questions
ISO 9001 Lead Auditor Training - Typical short essay type questions are worth 5 marks
each. Your response should cover a breadth of several points as opposed to going into
depth on one or two points. (Tip: Provide bullet point answers covering 5-10 separate
points)
1 Explain the characteristics of (and differences between) a first party, second party, and
third party QMS audit.
2 A complete audit of an organization's QMS consists of two distinct stages. Briefly describe
each of these stages.
3 An auditor is conducting a third party QMS audit and the guide that has been appointed to
accompany him is called away by his supervisor. After five minutes, the guide has not
returned. What should the auditor do? What should the auditor not do?
4 Identify five clauses where planning of QMS activities is required by ISO 9001 and briefly
explain each planning activity.
5 State the typical objective evidence that could be gathered in order to verify conformity
with the requirements of clause 7.6 of the ISO 9001 Standard. Your answer should contain
at least five specific examples in order to illustrate your understanding.
6 An experienced auditor has been instructed to carry out a QMS audit of a potential
supplier. From initial contacts with the supplier, it is learned that a formal documented QMS
does not exist. List five steps the auditor could take in planning for such an audit.
7 An auditor may experience delaying tactics while conducting an audit. Give two examples
of such tactics and describe three ways in which the auditor could deal with these
situations.
8 State four advantages and one disadvantage of using checklists to perform a QMS audit.
9 At the closing meeting, the quality management representative (QMR) of the organization
audited informs the auditor that they have now written a procedure to correct a serious
non-conformity that the Registrar auditor found on the first day of a two-day external audit.
The QMR proposes that the auditor examine the procedure during the meeting and then
withdraw the nonconformity report. How should the auditor respond?
10 List and briefly explain five different ways in which an auditor obtains objective evidence
while performing a QMS audit.
11 Explain the purpose and benefits of a preliminary visit to a company by the audit team
leader prior to a QMS audit.
12 Arriving for the closing meeting, at the conclusion of an audit in which numerous
nonconformities have been recorded, the auditor is told by the quality management
representative that none of the senior managers who were contacted are available to
attend. What should the auditor do?
13 While in the warehouse during a third party QMS audit, the guide gets into a heated
argument with the warehouse clerk over the absence of inspection status labels on skids
of paint pails being stored on the racks. The warehouse clerk claims labeling is not necessary
because the racks are a designated area for the paint pails to be kept until inspected and
approved by the inspection department. The guide turns to the auditor and asks for
support. How should a third party auditor respond?
14 At the opening meeting of a third party QMS audit, the management representative
(QMR) of the audited company informs the auditor that a recent internal audit has disclosed
numerous deficiencies in control of calibration. Corrective action is being planned. The QMR
proposes the audit of the calibration department be deleted from the audit plan. How
should the auditor respond?
15 What objective evidence could be available in order to verify nonconformity with the
requirements of clause 7.4 of the ISO 9001 Standard?
SO 9001 Lead Auditor Training - Typical long essay type questions are worth 10 marks
each. Your response should cover some depth on the subject matter. (Tip: Provide a
combination of narrative and bullet points covering around 200-250 words in your
response)
1 Describe the responsibilities of a QMS auditor who is a member of a third party QMS audit
team.
2 An audit is being planned on an organization that carries out purchasing activities and
verification of purchased products. Write an audit checklist of eight key controls that an
auditor should cover during an audit of those activities. State the relevant clauses of ISO
9001.
(Hint: For full credit, students should use a process based approach and address at least
three different clauses of ISO 9001)
3 Describe the typical levels of QMS documentation. What objective evidence should be
looked at to verify that QMS documents are being controlled in conformity with clause 4.2.3
of ISO 9001?
4 List and explain the agenda items that a third-party QMS audit team leader should cover
during the closing meeting with the management of the organization being audited.
5 a) Clearly explain the steps that an auditee organization may take in responding with
corrective actions to nonconformities raised during a third party QMS audit.
5 b) What follow-up options are available to a third-party QMS auditor, to ensure that the
auditee organization has effectively carried out the corrective actions?
6 An audit is being planned on a company engaged in warehousing and distribution
activities. Items are moved from the receiving area and stored on racks in the warehouse
using forklift trucks, until required for shipment. Write an audit checklist of eight key
controls that an auditor should cover during an audit of those activities. State the relevant
clauses of ISO 9001.
(Hint: For full credit, use a process based approach and address at least three different
clauses of ISO 9001)
7 List and explain the agenda items that a third party QMS audit team leader should cover
during the opening meeting with the management of the organization being audited.
8 An audit is being planned for a company that receives customers sales orders for products
by telephone, fax, and e-mail. The products are shipped directly to the customer from a
warehouse using the companys own trucks. Write an audit checklist of eight key controls
that an auditor should cover during an audit of those activities. State the relevant clauses of
ISO 9001.
(For full credit, students should use a process based approach and address at least three
different clauses of ISO 9001)
9 What are the benefits of implementing a QMS that meets the requirements of ISO 9001?
Identify and describe three clauses of ISO 9001 that provide opportunities to improve the
quality system and overall business performance.
Requirement 2: Identify the ISO 9001 clause number that you think would be the most
appropriate selection for the stated nonconformity.
1. A copy of a machine set-up instruction/checklist MSU 1201 on how to set up machine
#1201 was marked not under change control.
2. In the Storage Room, stocks of food additives were found to be contaminated by fumes
from extraction ducts that were not airtight.
3. A written instruction requires the involvement of the quality department when labels
need to be restored to course binders that have lost their labels. The temporary personnel
who said they restored labels were unaware of the approved instruction and the method
they described did not comply with it anyway.
4. No internal audit had been carried out on Human Resources, Maintenance, Sales Order
Entry, Information Technology. The Quality Manual (clause 4.2 states that audits will be
carried out on all departments on a six-month basis as a minimum.
5. The work instructions for field service contracts JLL-0295/C, DCG-2596/A, and FG-18423/X
did not communicate special requirements due to lack of space on the work instruction
form. The sales entry order clerk had been given no guidance as to how to deal with such a
contingency.
6. Therma-Glo (a material critical to product quality) does not have a purchase specification
and there is no procedure for quality verification of incoming material.
7. The jig fixture used for checking stamped plates on the production lines was badly
maintained. Guide pins were unstable causing misalignment and the reflection surface for
underside inspection was very dirty.
8. Although amendments to sales orders are recorded on receipt in Sales, there is no
method to ensure the changes are implemented throughout the system.
9. It is a requirement that test containers used for the Avery weigh scale are approved and
issued by the laboratory. There were test containers being used on the filling lines that had
not been so approved.
10. On the drum filling line, the requirement of 50 drums per hour to be inspected was not
being met. An average of 10 drums per hour was inspected between 3 pm and 12 midnight.
11. Gel Sealant was being held longer than the 5 minutes allowed at pouring temperature
and was not filtered before being applied on the line.
12. The patient medical records for recent tests showed occasional hand-written alerations.
These lacked an approving signature or date.