Scribd Logo
Upload

Welcome to Scribd!

  • Slab Deflection Calculation

    Uploaded by

    AHMED SOHEL
    748 views2 pages
    The document summarizes the calculation of slab deflection for a concrete slab with a span of 6400 mm, width of 1000 mm, and depth of 220 mm. It details the material properties, bending moment, required and provided steel reinforcement areas, and checks that the provided depth is greater than the required depth based on the calculations. The total bottom steel reinforcement required is 2847 mm2 and the provided top reinforcement is 753.6 mm2. The calculations show the slab design is safe against deflection.

    Original Description:

    xcxz

    Original Title

    Slab Deflection

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the calculation of slab deflection for a concrete slab with a span of 6400 mm, width of 1000 mm, and depth of 220 mm. It details the material properties, bending moment, required and provided steel reinforcement areas, and checks that the provided depth is greater than the required depth based on the calculations. The total bottom steel reinforcement required is 2847 mm2 and the provided top reinforcement is 753.6 mm2. The calculations show the slab design is safe against deflection.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xls, pdf, or txt
    748 views2 pages

    Slab Deflection Calculation

    Uploaded by

    AHMED SOHEL
    The document summarizes the calculation of slab deflection for a concrete slab with a span of 6400 mm, width of 1000 mm, and depth of 220 mm. It details the material properties, bending moment, required and provided steel reinforcement areas, and checks that the provided depth is greater than the required depth based on the calculations. The total bottom steel reinforcement required is 2847 mm2 and the provided top reinforcement is 753.6 mm2. The calculations show the slab design is safe against deflection.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xls, pdf, or txt
    of 2

    Slab deflection calculation

    Span of the slab


    Width of slab
    depth of slab
    Strength of concrete

    l
    b
    d
    Fcu

    =
    =
    =

    Strength of steel
    Span/depth for slab
    Bending moment

    Fy =
    l/d =
    M =

    6400 mm
    1000 mm
    220 mm
    35 N/mm2 d=

    460 N/mm
    26 as per BS8110
    160 Knm

    M/bd2fcu

    K = 3.306 N/mm2

    z=d(0.50+(0.25-K/0.90fcu)1/2)

    z =

    194 mm

    Astr =

    2378 mm2

    Area of steel required


    (Astr=0.87x420x0.95z)
    Bottom reinforcement

    12 @

    Area of steel

    A1 = 753.6 mm2

    Additional reinforcement

    20 @

    150 mm

    150 mm

    Area of steel
    Total area of bottom steel
    (A1+A2)

    A2 =

    2093 mm2

    Ast =

    2847 mm2

    Modification factor for Ast

    m1 = 1.019

    Top reinforcement provided


    Area of top reinforcement
    provided
    Modification factor for Asc

    12 @

    0.22

    150 mm

    l=

    c/c

    c/c

    c/c

    Asc = 753.6 mm2


    m2 = 1.102
    < 1.5

    dr1 =

    depth of slab provided

    SAFE IN DEFLECTION

    219 mm

    fs=5fyAsr/(8Ast)

    240.19

    100Asc/bd

    0.3425

    <2

    m2=1+[100Asc/(bd)]/[3+100Asc/(bd)]

    depth of slab required


    d=l/(26*m1*m2)

    6.40

    as per BS8110

    > depth required

    You might also like