Professional Documents
Culture Documents
True Image Home: Beginner's Guide To Creating A Basic Full Disk Archive
True Image Home: Beginner's Guide To Creating A Basic Full Disk Archive
2. Install new version. If purchased or upgrading, new & old serial numbers will be needed.
3. Create the Acronis Bootable Rescue CD via the Acronis Tools/options menu. This creation is
absolutely essential. Successful restores or disk upgrades will depend upon its use.
See image BR1.
4. Attach and switch/power on any external drives used for backup storage or recovery purposes.
5. Confirm all internal, external and CD/DVD drives are identified within TI Windows mode. This
can be achieved by starting TrueImage and opening the Create Backup Wizard and proceeding
as far as the Backup Archive Location screen. Refer Image B-5.
6. Re-boot using the TI Rescue CD. Select Full version option and confirm all internal, external and
CD/DVD drives are identified within TI Rescue mode. Again, this is achieved by opening the
Create Backup Wizard and proceeding as far as the Backup Archive Location screen. At this
point, you can either create a backup image while booted into the Rescue CD; or, remove the TI
Rescue CD and re-boot into Window. Part of your usage should be to create backups both from
within Windows plus when booted from the TI Rescue CD.
7. Begin backup task: Start TI and commence a backup task via the Create Backup Wizard. Refer
image B-1 to B-3.
8. Partition Selection: A backup consisting only of “Files & Folders” is not bootable. When
restoring to a new drive, a backup (image) of the entire disk is needed. When Disk 1 is ticked,
the box beside each partition will be automatically checked. You need to identify your drives via
unique disk volume names assigned by you as detailed in Link 1 below. Relying on just drive
letters will cause confusion, as these will differ when using TI in Rescue mode. Refer Image B-4.
9. File names: Backup files are usually stored in identifying folders created either prior to or
during the backup process. Use simple illustrative names, assign current dates and identify
whether full disk or single partition, e.g. FULL-FEB3-.TIB or C-ONLY-FEB3-.TIB. Do not use
multiple periods as part of the file name as use can render your backup useless. Use a dash (-)
or hash (#) as ending character so multiple .tib files can be more easily identified. Never ever
use spaces (or multiple periods) as part of a backup file name. Refer image B-5.
Page 1 of 12
10. Backup destination: Backup files are best directed to other internal or external drives for more
trouble free results. Backing up directly onto DVD’s can be problematic, therefore, a better
method (if DVD media to be used) is to create the backup on a hard drive (use the backup option
to manually split the image into DVD sized chunks if spanning multiple DVDs) and then use 3rd
party software to burn the image onto DVD’s as a data compilation. Refer image B-8.
11. Compression and Priority: It’s recommended that you set both the Compression Level and the
Backup Priority options to Normal.
12. Archive Validation: It is important that archives are validated after they are created. This can
be carried out as part of the backup task by ticking the Validate box in the Backup Creation
Options. Refer image B-9. Validation can also be carried out as a separate task via the Backup
Archive Validation Wizard. This is best done after booting from the TI Rescue CD as this will be
the mode used when restoring your main system partition. If you subsequently copy an image to
another location then it needs to be validated again after it’s been copied.
13. File sizes: The NTFS drives do not split .tib backup files whereas FAT32 drives will split into 4gb
increments. Both can be user controlled via Archive Splitting. Normal compression will reduce
backup size approximately 40-50%. Audio/images/movies are already compressed and do not
additionally compress during imaging. The XP Disk Management Tool (Image DM-1) can display
how your disk is partitioned or which file system being used on your drives.
14. USB tips: Best results are usually obtained by connecting the external drive directly to the USB
port on rear panel of computer. Do not use 2-4 port connectors. Sometimes, it is necessary to
disconnect other USB devices if the Rescue mode CD does not properly identify the external
drive. External drives must be connected & powered up (running) prior to starting TI either from
within Windows mode or from the Rescue CD.
15. Disk Cloning: This procedure is not covered by this guide. However, a brief clarification of
terminology can be found at the end of this document.
16. User Awareness: It is important that the user be aware of the existence of all partitions that exist
on their computer–especially their system disk. The Disk Management feature can provide a
graphical display of all disks and their partitions (both hidden or diagnostic) that exist on the
computer. This display will illustrate whether the computer has one or more partitions and whether
any of the partitions are manufacturer recovery partitions. Please take the time to acquaint yourself
with your own disk specifications as illustrated via Disk Management examples on page 11 of this
guide.
There are multiple ways to open the Disk Management feature:
a. Click the Start menu button and Right click on the “My Computer” menu option (or desktop
icon) and click the “Manage” option
b. Or, click on the Start/Run option and paste this command and press Enter
%windir%\system32\diskmgmt.msc
c. Or, open the Control Panel and select the Administrative Tools/Computer
Management/Disk Management option.
Helpful Links
Page 2 of 12
If the step 4 procedures above do not work for you, try either m anually closing the tray before clicking the Proceed
option. Or, select the ISO option which enables to save the file to your hard drive and then burn the ISO file using
3 rd party burn software such as Roxio or Nero, etc. The TrueIm age Help icon is displayed for additional assistance.
One of the purposes of this CD is to enable the user to perform backup or recovery or disk replacem ent when
booted from the TI Rescue CD. After the successful creation of the TI Rescue CD, use a Sharpie pen and write
both the version build and serial num ber on the CD.
Also suggest that you go to the Acronis website (link below) and register your serial num ber. Your purchase is
NOT prerecorded. By registering your serial num ber, your serial will always be available even after future
purchases/recordings. Your personal login page is also your access point for downloads of any newer builds
released for your registered version--as well as the creation point for any official request for support from Acronis.
http://www.acronis.com /hom ecom puting/m y/updates/
W hen installing a new version or update, it is also recom m ended that you uninstall any previous version before
installing any new version. Each update is a standalone version and a prior installation is not necessary but a prior
serial num ber m ay be required--if updating. Rem inder: create a new TI Rescue CD for each new version build that
you install; and write serial num ber and version/build num ber on each Rescue CD created.
Page 3 of 12
Perform several practice simulations before performing the task for real.
A few extra minutes spent performing simulations can help to provide a better
understanding of the correct choices and may prevent troublesome errors.
Page 4 of 12
Page 5 of 12
Once you have a “disk” type backup, you can then restore/overlay any of the
single partitions; or restore all the partitions so the entire disk can be replaced.
Page 6 of 12
Page 7 of 12
Page 8 of 12
The size of each backup file (archive) is controlled by options selected on this screen.
This option will have validation included as part of the backup creation.
Page 9 of 12
Summary of actions that will occur once the Proceed option is checked.
Recommendation: Do not click the proceed button until you have made
several practice runs so you feel comfortable with your
selections.
Page 10 of 12
Examples of Disk Management Displays
(your display may differ)
Page 11 of 12
Cloning / Imaging Terminology
(extracts from Acronis Support postings)
Clone Disk - migrates/copies the entire contents of one disk drive to another (e.g., install a larger disk)
to achieve two identical drives with the same file structure. During the cloning process you are presented
with a choice what to do with the old drive - keep it as it is, or erase.
When you use the "Disk Clone" tool, you effectively copy/move all of the contents of one hard disk drive
onto another hard disk drive. This function allows you to transfer all the information (including the operating
system and installed programs) from a small hard disk drive to a large one without having to reinstall and
reconfigure all of your software. The migration takes minutes, not hours, but it is not generally used as a
backup strategy.
Backup - (Imaging) creates a special archive file for backup and disaster recovery purposes--which also
includes new drive replacement. Archive files can be created within Windows mode or from Acronis
bootable Rescue CD. Archive files stored can be stored in folders and/or alternate drives or media.
If interested in backing up your hard drive for the disaster recovery purposes, the Backup approach is
recommended. Moreover, there are several advantages of creating an image over the disk cloning
procedure such as: you can create an image without rebooting your PC, image creation can be scheduled
for the particular point in time. Acronis True Image allows you to create incremental and differential images,
image archive contains only the actual data and so it has a smaller size, images are ordinary files and so
they can be stored on any type of the supported media, etc. However, the final choice is always up to your
needs.
gh-acronis-backup1.pdf
Initial Release, dated March 8 2007
revised May 17, 2007
revised July 5, 2008
Page 12 of 12