Professional Documents
Culture Documents
David Dent - Insect Pest Management
David Dent - Insect Pest Management
2 nd Edi t i on
Prelims.1 10/7/00 11:03 am Page i
To the late
Basi l D ent and Thomas W r i ght
Men of Principle
Prelims.1 10/7/00 11:03 am Page ii
I nsect Pest M anagement
2 nd Edi t i on
D . D ent
CABI Bioscience
UK Centre
Ascot
UK
CABI Publishing
Prelims.1 10/7/00 11:03 am Page iii
CABI Publ i shi ng i s a divi si on of CAB I nt er nat i onal
CABI Publishing CABI Publishing
CAB International 10 E 40th Street
Wallingford Suite 3203
Oxon OX10 8DE New York, NY 10016
UK USA
Tel: +44 (0)1491 832111 Tel: +1 212 481 7018
Fax: +44 (0)1491 833508 Fax: +1 212 686 7993
Email: [email protected] Email: [email protected]
Web site: http://www.cabi.org
CAB International 2000. All rights reserved. No part of this publication may
be reproduced in any form or by any means, electronically, mechanically, by
photocopying, recording or otherwise, without the prior permission of the
copyright owners.
A catalogue record for this book is available from the British Library,
London, UK.
Li brary of Congress Cat al ogi ng- i n- Publ i cat i on D at a
Dent, David, Ph.D.
Insect pest management/David Dent.--2nd ed.
p. cm.
Includes bibliographical references.
ISBN 0-85199-340-0 (hc. : alk. paper)--ISBN 0-85199-341-9
(pbk. : alk. paper)
1. Insect pests--Integrated control. I. Title.
SB931.D45 2000
632.7--dc21
99087126
ISBN 0 85199 340 0 (HB)
0 85199 341 9 (PB)
Typeset in 9/11pt Melior by Columns Design Ltd, Reading
Printed and bound in the UK at the University Press, Cambridge
Prelims.1 10/7/00 11:03 am Page iv
Preface xi
Acknowledgements xiii
1 Introduction 1
1.1 A Brief History of Pest Management 1
1.2 Causes of Pest Outbreaks 7
1.3 The Stakeholders in Pest Management 9
1.3.1 Governments, politics and funding agencies 9
1.3.2 The research scientists 10
1.3.3 Commercial companies 11
1.3.4 Farmers and growers 12
1.3.5 Customers and consumers 13
1.3.6 Balancing costs and benets 13
2 Sampling, Monitoring and Forecasting 14
2.1 Introduction 14
2.2 Sampling 15
2.2.1 Random, stratied random and systematic sampling 15
2.2.2 Sample size 17
2.2.3 Sample independence and interaction 19
2.3 Population Estimates 20
2.3.1 Absolute estimates 20
2.3.2 Relative estimates 21
2.3.3 Natality 24
2.3.4 Development and growth 25
2.3.5 Survival and mortality 25
2.3.6 Migration 26
2.4 Monitoring Strategies and Objectives 28
2.4.1 Surveys, eld based and xed position monitoring 28
2.4.2 Biology and nature of attack 29
2.4.3 Availability and suitability of monitoring techniques 30
2.5 Forecasting 33
Cont ent s
v
Prelims.1 10/7/00 11:03 am Page v
2.5.1 Action thresholds 33
2.5.2 Temperature and physiological time 35
2.5.3 Predictive models 38
2.5.4 Geographic Information Systems 45
2.6 Discussion 46
3 Yield Loss 48
3.1 Introduction 48
3.2 Approaches and Objectives 48
3.3 Measurement of Yield Loss 49
3.3.1 Pest intensity 49
3.3.2 Types of pest damage 50
3.3.3 Measures of yield and yield loss 52
3.4 Crop Loss Surveys 53
3.5 Plant Growth Analysis and Modelling 55
3.5.1 Crop growth models 58
3.5.2 Modelling plant physiological processes 60
3.6 Manipulative Techniques 62
3.6.1 Articial infestation 62
3.6.2 Simulated damage 63
3.6.3 Control of initial levels of infestation 66
3.7 Paired Treatment Experiments 66
3.8 Field Trials: Principles 69
3.9 Economics of Yield Loss 73
3.9.1 Infestation and yield loss 74
3.9.2 Economic threshold concept 75
3.9.3 Economic thresholds in practice 77
3.10 Discussion 79
4 Insecticides 81
4.1 Introduction 81
4.2 Objectives and Strategies 81
4.3 Classes of Chemical Insecticides 84
4.3.1 Organochlorines 84
4.3.2 Organophosphates 84
4.3.3 Carbamates 85
4.3.4 Pyrethroids 85
4.3.5 Insect growth regulators 85
4.3.6 New classes and insecticide leads 86
4.4 Formulations 88
4.4.1 Solutions 88
4.4.2 Emulsion concentrates 88
4.4.3 Water dispersible powders 88
4.4.4 Suspension concentrates 88
4.4.5 Baits 88
4.4.6 Dusts 89
4.4.7 Granules and pellets 89
vi Contents
Prelims.1 10/7/00 11:03 am Page vi
4.4.8 Fumigants 89
4.4.9 Controlled release formulations 89
4.4.10 Spray adjuvants 89
4.5 The Target and Transfer of Insecticide 90
4.5.1 Efcacy testing 90
4.5.2 Spray characteristics and droplet deposition 92
4.5.3 Factors inuencing the target and pick-up 94
4.6 Application Equipment 99
4.7 The Farmer/User Requirements 101
4.7.1 Ease of use 101
4.7.2 Safety 103
4.7.3 Economic viability 106
4.8 Insecticide Resistance 107
4.9 Ecotoxicology 111
4.9.1 Non-target arthropods 111
4.9.2 Other organisms 113
4.9.3 Fate of insecticides in air, soil and water 113
4.9.4 Insecticide residues 114
4.10 Rational Insecticide Use 115
4.10.1 Timing of insecticide application 115
4.10.2 Dosage and persistence 118
4.10.3 Selective placement 118
4.11 Discussion 120
5 Host Plant Resistance 123
5.1 Introduction 123
5.2 Objectives and Strategies 123
5.3 Genetics of Virulence and Resistance 124
5.3.1 The pathosystem concept 125
5.3.2 The vertical pathosystem 129
5.3.3 The horizontal pathosystem 132
5.3.4 The gene-for-gene model and biotypes 133
5.3.5 Incomplete, quantitative vertical resistance 136
5.3.6 Durable major gene resistance and horizontal resistance 137
5.4 Breeding Methods 138
5.4.1 Plant breeding schemes 139
5.4.2 Inbred pure lines 141
5.4.3 Open-pollinated populations 143
5.4.4 Hybrids 145
5.4.5 Clones 147
5.4.6 Backcross breeding 148
5.4.7 Breeding for horizontal resistance 149
5.4.8 Breeding trials design 153
5.5 Evaluating Resistance 160
5.5.1 Mechanisms of resistance 160
5.5.2 Evaluating antixenosis and antibiosis 161
5.5.3 Morphological and biochemical bases of resistance 166
Contents vii
Prelims.1 10/7/00 11:03 am Page vii
5.5.4 Diagnostic characters and genetic markers 170
5.6 Genetic Manipulation 170
5.6.1 Techniques in genetic manipulation 171
5.6.2 Genetic manipulation for insect resistance 171
5.7 Durable Crop Resistance to Insects 173
5.8 Discussion 177
6 Biological Control 180
6.1 Introduction 180
6.2 Objectives and Strategies 180
6.3 Micro- and Macro-biological Control Agents 181
6.3.1 Pathogens 181
6.3.2 Predators 184
6.3.3 Parasitoids 185
6.4 Agent Selection 185
6.4.1 Pests and cropping system 185
6.4.2 Biocontrol agent selection criteria 188
6.5 PredatorPrey Theory and Analytical Models 189
6.5.1 The general model 190
6.5.2 Equilibrium levels 191
6.5.3 Stability 193
6.5.4 Metapopulation dynamics and models 199
6.5.5 Multiple species models 200
6.5.6 Life table analysis 201
6.6 Practical Approaches to the Evaluation of Natural
Enemies 205
6.6.1 Field survey, collection and observation 205
6.6.2 Dissection and biochemical techniques 206
6.6.3 Exclusion/inclusion methods 209
6.6.4 Insecticidal check method 214
6.6.5 Behavioural studies and prey enrichment studies 214
6.6.6 Ranking of natural enemies 215
6.7 Classical Biological Control 215
6.7.1 Target pest identication and area of origin 216
6.7.2 Foreign exploration, selection and eld evaluation 217
6.7.3 Quarantine and mass production 217
6.7.4 Release and establishment 218
6.7.5 Post-establishment evaluation 219
6.8 Inundation and Biopesticides 220
6.8.1 Biopesticide development 222
6.8.2 Production of pathogens 223
6.8.3 Use of biopesticides 223
6.9 Augmentation and Inoculation with Natural Enemies 224
6.9.1 Mass rearing of natural enemies for release 225
6.9.2 Costs and benets 226
6.10 Conservation Biological Control 230
6.10.1 Habitat refuges 230
viii Contents
Prelims.1 10/7/00 11:03 am Page viii
6.10.2 Food sources 231
6.11 Discussion 233
7 Cultural and Interference Methods 235
7.1 Introduction 235
7.2 Approaches and Objectives 236
7.3 Condition of the Host 237
7.4 Modifying the Physical Environment 238
7.4.1 Physical barriers and mulches 241
7.5 Agronomic Practices 241
7.5.1 Crop rotation 242
7.5.2 Tillage practices 243
7.5.3 Planting date 245
7.5.4 Sowing/planting density 247
7.6 Mixed and Intercropping 250
7.6.1 Ecological theory and experimentation 251
7.7 Semiochemicals 254
7.7.1 Types of behaviour modifying chemicals 254
7.7.2 Mass trapping 256
7.7.3 Mating disruption 256
7.7.4 Lure and kill target systems 260
7.7.5 Manipulating natural enemies 260
7.8 Sterile Insect Technique and Autosterilization 261
7.8.1 Autosterilization systems 262
7.9 Discussion 264
8 Legislation, Codes of Conduct and Conventions 267
8.1 Introduction 267
8.2 Quarantine Regulations 268
8.3 Regulation of Pesticides 270
8.4 Regulation of GMOs 273
8.5 The Convention on Biological Diversity 274
8.6 Discussion 274
9 Programme Design, Management and Implementation 276
9.1 Introduction 276
9.2 Dening the Problem 276
9.2.1 Historical prole 276
9.2.2 Seasonal proles and damage matrices 278
9.2.3 Interaction matrices 279
9.2.4 Decision trees 279
9.2.5 Understanding the farmer 279
9.3 Programme Design 281
9.3.1 Research status analysis 283
9.3.2 Selection of control measures pest types 284
9.3.3 Selection of control measures types of control 289
Contents ix
Prelims.1 10/7/00 11:03 am Page ix
9.3.4 Selection of control measures operational factors 289
9.3.5 Objectives and strategies 289
9.4 Programme Management 291
9.4.1 Organizational structures 292
9.4.2 Management as an integrating activity 293
9.4.3 Management training for scientists 298
9.5 Delivery of Research Results 299
9.5.1 Simulation models 299
9.5.2 Expert systems 302
9.5.3 Linear programming 303
9.5.4 Goal programming 305
9.5.5 Decision trees 307
9.5.6 Dynamic programming 310
9.6 Implementation and Adoption 312
9.6.1 Conditions for change 312
9.6.2 Reasons for failure to adopt new technologies 314
9.6.3 Extension services 314
9.6.4 Farmers Field Schools 315
9.7 Discussion 315
10 Driving Forces and Future Prospects for IPM 318
10.1 Introduction 318
10.2 Working IPM Systems 318
10.2.1 Pest management in soybean 318
10.2.2 Pest management in cotton 321
10.2.3 Pest management in greenhouse crops 325
10.2.4 Lessons learnt 326
10.3 Panaceas, Paradigms and Pragmatism 327
10.4 Models, Information Technology and Communication
Technology in IPM 330
10.5 A Question of Scale? 334
10.5.1 Sustainable use of control measures 334
10.5.2 Levels of integration 335
10.6 Technological Advances and Commerce 335
10.7 Politics, the Public and the Environment 337
10.8 Conclusion 339
10.8.1 The problem 339
10.8.2 A framework for the future 340
10.8.3 And nally 341
References 342
Index 399
x Contents
Prelims.1 10/7/00 11:03 am Page x
The subject of pest control is rarely dis-
cussed without reference to the concept of
integrated pest management, or IPM as it
is more commonly known. IPM is essen-
tially an holistic approach to pest control
that seeks to optimize the use of a combi-
nation of methods to manage a whole
spectrum of pests within a particular crop-
ping system. Insect pest management is
often thought to be synonymous with IPM,
mainly because the concept was devel-
oped by entomologists, but in its widest
sense IPM refers to the management of
weeds, pathogens as well as insects. Insect
pest management is a subsystem of IPM
but for the sake of simplicity the two are
considered synonymous throughout the
book unless stated otherwise.
Pest management involves a number of
stakeholders ranging from scientists to
farmers and agribusiness to consumers. As
a textbook for undergraduate/postgraduate
students and for researchers of insect pest
management emphasis is placed on the
underlying principles and experimental
approaches to the science that underpins
the development of working IPM systems.
However, the different types of stakeholder
have an impact on the way pest manage-
ment is viewed, studied and practised and
hence, these different perspectives have
been included wherever possible.
The aim of this book is to provide an
overview of insect pest management, high-
lighting the major problem areas and con-
tentious issues and where possible
attempting to identify promising lines and
directions for future research and imple-
mentation. The book includes descriptions
and explanations of the different control
measures and their use, categorized as
insecticides, host plant resistance, biologi-
cal control, cultural control and interfer-
ence methods, and quarantine legislation.
In addition, there are chapters on sam-
pling, monitoring and forecasting, yield
loss assessment, programme design, man-
agement and implementation. The intro-
duction provides a brief history of pest
management, the causes of pest outbreaks
and an overview of the different stakehold-
ers involved in pest management. The nal
chapter addresses the driving forces that
are shaping the future of IPM, including
three case studies of working IPM systems.
The book includes case studies and cites
examples throughout from a range of ento-
mological disciplines, veterinary, medical,
agricultural, forestry and postharvest sys-
tems. I have tried in this second edition to
reduce the bias towards agricultural systems
evident in the rst. The use of examples
from both temperate and tropical countries
and from a wide chronological range are
retained the latter because it is necessary
to retain a perspective on current science in
relation to what has been done in the past.
There is too often a tendency to assume that
only the most current research is applicable
to todays problems the best research with-
Preface
xi
Prelims.1 10/7/00 11:03 am Page xi
stands the test of time and provides the
basis for that which is possible now.
A great deal of work is carried out with
the objective of developing or implement-
ing IPM programmes but even after nearly
40 years of progress in the science and
socio-economics of pest management there
are too few opportunities to take an holistic
approach to the subject. Ten years ago there
was a need for individuals who were able
to address the subject of IPM in an interdis-
ciplinary way for people who can really
coordinate, manage and deal with the inter-
disciplinary nature of IPM. Although there
are now more people who work with this
ability there is still a great need for others
who can contribute to the science of pest
management at this level. I hope now, as I
hoped ten years ago when I rst wrote this
book, that this second edition will con-
tribute something to this change of perspec-
tive and encourage others to consider the
subject of pest management as a whole
rather than as isolated disciplines. For it is
still at this holistic level that the greatest
and most exciting advances are to be made.
xii Preface
Prelims.1 10/7/00 11:03 am Page xii
I am grateful to a large number of people
for their assistance and encouragement
during the writing of both the rst and sec-
ond editions of this book. My ideas and
views have been shaped in the intervening
years between editions by the many discus-
sions I have had with colleagues around
the world. Those ideas and views are now
reected in the changes I have made to this
second edition. My thanks to my col-
leagues for their input.
For those who took the time to work on
the original draft, my renewed thanks: Tom
Coaker, Dereck Campion, Martin Dean,
Peter Haskell, Eric Hislop, Mark Jervis,
Neil Kidd, Bill Reed, Raoul Robinson, Peter
Walker and Tristram Wyatt. My apprecia-
tion also to all those who took the time to
search for, copy and send me reprints of
their papers for this latest edition: Lindsay
Baggen, Rod Blackshaw, Colin Bower,
Micheal Cohen, Joanne Daly, Ian Denholm,
Alan Dewar, T. Drinkwater, Bob Ellis,
Annie Enkegaard, Peter Follett, Dawn
Gouge, Jean-Claude Gregoire, David
Hagstrum, Jane Hayes, Rick Hodges, John
Holt, Casey Hoy, Marcos Kogan, Simon
Leather, Joop van Lenteren, Graham
Matthews, Peter McEwen, Geoff Norton,
Larry Pedigo, Les Penrose, John Pickett,
Wilf Powell, Martin Shapiro, Les Shipp,
Ken Schoenly, Nan-Yao Su, Charlie
Summers, Graham Thwaite, Lester
Wadhams, Richard Wall, John Westbrook,
Peter Witzgall, Steve Wratten, Vicki
Yokoyama, Frank Zalom. My apologies if I
have left anyone off the list who should
have been included.
The typing of this edition has been
divided between my colleague and friend
Jeremy Harris and my wife Sue my sin-
cere thanks to you both. To Jeremy also my
appreciation for the time and skills at the
computer to produce the ten new gures
for the book. I remain forever grateful to
Sue for having made the rst edition possi-
ble through all her support and encourage-
ment, and the typing and drawing. Also for
too many years when it dominated all of
our spare time. And now, my apologies,
love and thanks to Sue, Catherine and
Thomas for allowing me to spend so much
time closeted away writing when there
were sunny days outside and many more
fun things to be doing.
David Dent
1999
Acknow l edgement s
xiii
Prelims.1 10/7/00 11:03 am Page xiii
Pest control constitutes an ancient war, waged by man for 4000 years or more against a great variety
of often small and remarkably persistent enemies. Suprisingly, although the war is old, its dynamics
and the nature of the principal protagonists seem poorly understood. Even the objectives, at least of
man, are ill-dened. It is as though man, in the heat of battle, has not had the time to analyse in any
sophisticated fashion the conict in which he nds himself. Battles have been won and lost but
lessons have been learned slowly and painfully. It is only in recent years that people have begun to
ask the fundamental questions of principle and to raise doubts about implicit beliefs and objectives.
Conway 1976
Prelims.1 10/7/00 11:03 am Page xiv
A pest insect is one that is judged by man
to cause harm to himself, his crops, animals
or his property. In farming an insect may be
classied as a pest if the damage it causes
to a crop or livestock is sufcient to reduce
the yield and/or quality of the harvested
product by an amount that is unacceptable
to the farmer. Insects may be classed as
pests because they cause damage directly to
harvestable products, e.g. codling moth lar-
val damage to apples, or because they cause
indirect damage or harm in other ways, e.g.
by causing a nuisance to livestock or
humans or as vectors of plant or livestock
diseases. There are a myriad of ways in
which insects can cause harm and they
have done so for the thousands of years that
man has occupied the earth. Likewise
mans attempts to control or manage the
harm caused by insects has a long and var-
ied history. A knowledge of this history
adds an important dimension to the study
of pest management because it can provide
insights into the driving forces (technical,
economic, social) that have forged current
pest management practices which in turn
will provide some idea of the forces likely
to be acting in the future (Norton, 1993).
1.1 A Brief History of
Pest Management
The history of pest management dates
back to the beginnings of agriculture and
from that time it is a history that combines
important events (discoveries and dening
moments), inuential people, institutions,
organizations and governments in ways
that have led us to the current concept of
integrated pest management (IPM). IPM
has been dened as a pest management
system that in the context of the associ-
ated environment and population dynam-
ics of the pest species, utilizes as suitable
techniques and methods in as compatible
manner as possible and maintains the pest
population levels below those causing
economic injury (Smith and Reynolds,
1966). The concept of utilizing a number
of techniques in as compatible a manner
as possible is, of course, not new and even
the different control techniques available
to us today were utilized in some shape or
form many years BC. For instance, the use
of insecticide by the Sumerians who
applied sulphur compounds to control
insects and mites was rst recorded from
2500 BC onwards. Botanical insecticides
were used as seed treatments around
1200 BC by the Chinese who also applied
mercury and arsenical compounds to con-
trol body lice at that time.
First descriptions of cultural controls,
especially manipulation of planting dates,
were recorded around 1500 BC, while burn-
ing as a cultural control method was rst
described in 950 BC. Evidence of biological
control, of manipulating natural enemies,
comes from both China and Yemen where
1
Introduction
1
Chapter.1 13/7/00 9:29 am Page 1
colonies of predatory ants (Oecophylla
smaragdina) were set up in citrus groves,
moving between trees on bamboo bridges
to control caterpillar and beetle pests
(Coulsen et al., 1982). These practices date
back over 1000 years. Genetic resistance is
one of the oldest recognized bases of plant
pest control (Panda and Khush, 1995).
Theophrastus recognized the differences in
disease susceptibility among crop cultivars
as early as 3 BC (Allard, 1960) and, of
course, farmers will have selected for resis-
tance to local pests by the practice of sav-
ing seed from healthy plants for sowing the
next season. Over many generations of
selection resistant land races developed,
which provided sustainable levels of yield
for average local conditions. Thus by
500 AD all the general types of control mea-
sure available today insecticides, host
plant resistance, biological and cultural
control had already been developed and
used by one civilization or another.
Reference to developments in pest man-
agement seem to be few and far between
for the period between AD and the 18th
century. A number of bizarre events such
as the excommunication of cutworms in
Berne, Switzerland, in 1476 and the ban-
ishing in 1485 of caterpillars by the High
Vicar of Valence perhaps depict the lack of
understanding of the causes of pest prob-
lems at this time. It was not until 1685 that
the rst correct interpretation of insect par-
asitism was published by the British physi-
cian Martin Lister who noted that the
ichneumon wasps emerging from caterpil-
lars were the result of eggs laid by adult
female ichneumonids (van Driesche and
Bellows, 1996). This was followed by a
similar interpretation of parasitism in
Aphidius species by the Dutchman Antoni
van Leeuvenhock recorded in 1700. The
work of Linnaeus burgeoned an interest in
insect descriptions which promoted greater
observation and study of insect biology. It
was Linnaeus who rst noted in 1752 that
Every insect has its predator which fol-
lows and destroys it and then commented
on how such Predatory insects should be
caught and used for disinfecting crops
(Hrstadius, 1974). The earliest documen-
tation on host plant resistance occurs in
1762 with the description of hessian y
(Mayetiola destructor) resistant wheat cul-
tivar, Underhill, in the US by Haven
(Panda and Khush, 1995).
From these beginnings the scientic dis-
cipline of entomology began to take shape
at the turn of the 19th century. Pioneers
such as John Curtis in the UK, Thomas Say
and C.V. Riley in the US created the basis
for applied entomology with their publica-
tions (e.g. Farm Insects, J. Curtis, printed
184157 an illustrated account of pest
insects arranged by crops for ease of use by
farmers; American Entomology, 1824 by T.
Say) and their innovative approaches to
pest control which formed the foundation
for modern pest control. In the US the
Rocky Mountain locust plagues of the
1870s initiated the formation of the US
Entomological Commission (Sheppard and
Smith, 1997). In 1881 C.V. Riley was
appointed Entomologist of the Department
of Agriculture and the Division of
Entomology was created within the USDA.
The Entomological Society of Canada was
founded by W. Saunders and C. Bethuse in
1863 with the rst issue of the journal The
Canadian Entomologist published in 1868
(Sheppard and Smith, 1997). In 1873 C.V.
Riley was responsible for the rst interna-
tional movement of a biological control
agent Tyroglyphus phylloxerae which was
introduced into France to control grape
phylloxera, which unfortunately failed to
exert sufcient levels of control to be use-
ful. The rst successful example of classi-
cal biological control occurred in 1888
with the importation and release of the
Vedalia beetle (Rodolia (formerly Vedalia)
cardinalis) for control of the citrus pest of
the cottony cushion scale (Icerya purchasi)
in California (van Driesch and Bellows,
1996). Within two years the beetle had
controlled the scale throughout the state.
This project has far-reaching effects
because it demonstrated the feasibility of
utilizing arthropod predators to control
serious pest problems and produce large
economic benets.
2 Chapter 1
Chapter.1 13/7/00 9:29 am Page 2
Other areas of biological control were
also forging ahead during the 19th century.
Insect pathogens were rst considered as
biological control agents by Bassi in 1836,
when he proposed that liquids from cadav-
ers of diseased insects could be mixed with
water and sprayed on plants to kill insects.
However, it was not until 1884 when the
Russian entomologist Elie Metchnikoff
developed a means to mass produce the
fungus Metarhizium anisopliae for use in
the eld against the sugar beet curculio
Cleanus puntiventris that entomopath-
ogens proved their potential as a practical
control option.
The end of the 19th century saw a fun-
damental change in agriculture and urban-
ization, particularly in the US. Agriculture
was the linchpin to urbanization; a rapid
growth from a mainly subsistence way of
life towards greater mechanization (substi-
tuting labour) and commercialization
fuelled urbanization. Since insect pests
were a limiting factor in agricultural ef-
ciency, the importance of their control
increased. Thus, a demand developed for
the investigation, identication and control
of insect pests. In this way the subject of
entomology became identied as a distinc-
tive scientic discipline with the increase
in training and employment of State and
Federal entomologists. The numbers
increased from less than 20 in the mid-
1800s to more than 800 by the 1870s
(Sorenson, 1995). In 1889 the rst US
national professional group, the American
Association for Economic Entomology was
founded, followed by the publication of the
Journal of Economic Entomology, in 1908
(Howard, 1930).
The change from subsistence to com-
mercial agriculture had a major impact on
farmers attitudes to pest control, largely
because commercialization introduced the
need to borrow or make cash investments
which had not been necessary in subsis-
tence agriculture. Insect pest problems
caused losses of yield in subsistence agri-
culture but unless they were catastrophic
they did not risk the farmers livelihood,
whereas in commercial agriculture, insect
problems threatened the safety of other
cash investments and thereby threatened
the farmers continued ability to stay in
business (Benedict, 1953). This meant that
the standards for acceptable levels of insect
control increased from those that had been
acceptable in subsistence agriculture
(Morse and Buhler, 1997). Hence, the need
to reduce risk by ensuring effective pest
control became a prime consideration
among commercial farmers. This in turn
provided an ideal opening for chemical
insecticides which could provide reliable,
demonstrable levels of insect control for a
relatively low cost.
The new era, involving the use of toxic
substances for insect control, was led by
the use of the dye Paris Green which was
found to be effective against the Colorado
beetle in the US and was used with
Bordeaux mixture against Grape Phylloxera
in French vineyards (1870 and 1890). In
the 1890s lead arsenate was also intro-
duced for insect control. By 1910, lead
arsenate and Paris Green were the most
widely used insecticides sold on a com-
mercial basis with sales reaching 10 mil-
lion each year. In 1917 calcium arsenate
joined lead arsenate as the leading insecti-
cides in addition to the increasing list
of available products which included tar
oils, plant extracts, derris, nicotine and
pyrethrum (Ellis, 1993). Thus, the rst 40
years of the 20th century witnessed an
increased use and reliance on chemical
insecticides, including the introduction of
new compounds such as ethylene oxide,
thiocyanates and phenothiazine. However,
the application of chemical products
tended to be haphazard and very imprecise
with the technical material often ineffec-
tive. Hence at this time, although growing
in importance for use in pest control,
chemical insecticides did not yet dominate
the approaches adopted by farmers and
enormous potential was seen to exist for
biological control and breeding resistant
crop plants. With the former between 1920
and 1930 there were more than 30 cases of
natural enemy establishment recorded
throughout the world, based on the
Introduction 3
Chapter.1 13/7/00 9:29 am Page 3
increasing number of introductions of
exotic pest species promulgated by grow-
ing international trade, particularly of food
and bre raw materials.
Plant breeding for agronomic characters
had become well established in the 19th
century utilizing quantitative genetics, but
it was not really until the rediscovery of
Mendels Law of Heredity in 1900 that
geneticists understood qualitative breeding
approaches and stumbled upon disease
and later insect pest resistance factors of
economic importance (Robinson, 1996).
The systematic research of R.H. Painter in
the 1920s on the resistance to Hessian y
in wheat cultivars laid the foundations for
the development of resistance breeding
against insects utilizing qualitative genetics
(Panda and Khush, 1995). However, suc-
cesses were few and far between with
breeding for resistance to insects (unlike
pathogens); the most notable success at the
time being cotton resistant to Empoasca
bred in South Africa (Parnell, 1935) and
India (Husain and Lal, 1940). It was not
until the 1960s that the full potential of
host plant resistance to insects was fully
appreciated but by then the dominance of
chemical insecticides for insect control had
reached spectacular proportions.
Chemical insecticides came to promi-
nence on the back of the most famous
insecticide DDT (dichlorodiphenyl
trichloroethane) developed by Paul
Mller working for the Geigy Chemical
Company in 1939. DDT offered persistence,
low cost, virtually no plant damage, broad
spectrum activity and low acute mam-
malian toxicity. It was rst used in 1941 by
Swiss farmers to control Colorado beetle
and by 1945 DDT production had reached
140,000 tonnes a year. The success of DDT
also stimulated the search for other similar
chemicals and the subsequent develop-
ment of aldrin, HCH, dieldrin, heptachlor
and chlordane (Ellis, 1993). Other methods
of pest management paled in signicance
with the success achieved with these
impressive chemicals and hence, the use of
more biologically oriented approaches
declined dramatically in the 1940s and
1950s. This redirection of effort was miti-
gated by the overwhelming need to test the
efcacy of the ever expanding arsenal of
new chemical compounds (Kogan and
McGrath, 1993). Pesticides became the
only method used by many farmers for the
control of agricultural pests.
Ironically, at the same time that DDT
had obtained notoriety as a panacea for
pest control in 1946, the philosophy of IPM
came into being in the alfalfa elds of
Californias San Joaquin Valley (Summers,
1992). In 1946 K.S. Hagen was hired as the
rst supervised control entomologist in
California, where he monitored 10,000
acres of alfalfa for the alfalfa caterpillar
Colias eurythene and its parasite Apanteles
medicanis (Hagen et al., 1971). From the
experience of combining natural enemies,
with host plant resistance and rational use
of chemicals in the 1950s against the spot-
ted alfalfa aphid Therioaphis maculata
emerged the integrated pest control philos-
ophy presented in Stern et al. (1959).
However, the context in which the IPM
framework would achieve signicance was
happening around the world in situations
where pesticides were used in excess. Insect
resistance to chemical insecticides was rst
reported in 1946 in houseies in Sweden
but in the 1950s it became widespread in
many agricultural pests. Resurgence of tar-
get pests, upsurges of secondary pests (both
caused by the suppression of natural ene-
mies by insecticides), human toxicity and
environmental pollution (Metcalf, 1986)
caused by pest control programmes relying
on the sole use of chemicals reeked havoc in
many cropping systems. The ecological and
economic impact of chemical pest control
came to be known as the pesticide tread-
mill because once farmers set foot on the
treadmill it was virtually impossible to try
alternatives and remain in viable business
(Clunies-Ross and Hildyard, 1992). In addi-
tion, despite problems with the chemicals
used, the faith in and addiction to the
chemical technology by farmers was assured
through the continued development and
availability of new active ingredients com-
ing onto the market (Table 1.1).
4 Chapter 1
Chapter.1 13/7/00 9:29 am Page 4
A landmark event in the history of pest
management was the publication in 1962 of
the book Silent Spring by Rachel Carson,
which was not really important from the
point of view of its technical content but
rather from its impact on the general pub-
lic. Silent Spring brought pest management
practices into the public domain for the
rst time and provided the spring board for
an increase in the awareness of the general
public of the problems associated with
chemical insecticide use. This growing
environmental concern, combined with the
philosophy of integrated control advocated
by an increasing vocal band of scientists
provided openings for the funding and
development of alternative, more environ-
mentally friendly approaches such as insect
pheromones, sterile insect techniques,
microbial insecticides and host plant resis-
tance. The gypsy moth pheromone was iso-
lated, identied and synthesized in 1962;
by 1967 the screw worm Cochlomyia
hominivorax was ofcially declared as
eradicated from the US through use of the
male sterile technique (Drummond et al.,
1988); and in 1972 the rst commercial
release of a microbial insecticide of Bacillus
thuringiensis based on the isolate HD-1 for
control of lepidopterous pests occurred
(Burgess, 1981). Plant breeding using
Mendelian genetics had earlier in the cen-
tury produced very high yielding dwarf
wheat cultivars. The need to improve yield
in similar ways with other crops and hence
to alleviate third world malnutrition fos-
tered the establishment of the rst
International Agricultural Research Centre
(IARC) sponsored by the Consultative
Group for International Agricultural
Research (CGIAR), the International Rice
Research Institute (IRRI) in Los Baos in
the Philippines in 1960. This was followed
by seven other centres improving crop
reproductivity through development of
high yielding varieties (HYV). Part of this
development included breeding for insect
resistance, of which there was some limited
success, e.g. cultivar IR36 was resistant to
brown plant hopper (Nilaparvata lugens),
the green leaf hopper (Nephotettix
virescens), the yellow stem borer
(Scirpophaga incertulas) and the gall midge
(Orseolia oryzae) (Panda and Khush, 1995).
This period became known as the Green
Revolution alluding to the greening of
developing countries with high yielding
cultivars, particularly of rice (Panda and
Khush, 1995). Generally however, the resis-
tance was based on a form of resistance that
could be overcome by the insects and par-
ticularly in rice, farmers were advised to
spray their high yielding crops with chemi-
cal insecticides to protect them. Such mea-
sures were still necessary until the 1980s
when IPM methods were introduced into
rice systems for the rst time.
The concept of IPM in the 1960s and
1970s was based on restricting pesticide
use through use of economic thresholds
and utilization of alternative control
options such as biological products or
methods, biopesticides, host plant resis-
tance and cultural methods (Thomas and
Waage, 1996). IPM was launched in the US
and ultimately around the world with a
Introduction 5
Table 1.1. The availability of chemical insecticides
between 1950 and 1987 (from Ellis, 1993).
Insecticide Period
Organochlorines
DDT dust 19501972
DDT liquid 19591984
DDT bait 19671979
BHC dust 19501953
Aldrin 19591964
Dieldrin 19591964
Organophosphates
Fenitrothion 19771979
Tiazophos 1979present
Bromophos 1983present
Chlorpyrifos 1983present
Trichlorfon 1983present
Carbamates
Carbaryl 1985present
Methrocarp 19701972
Synthetic pyrethroids
Cypermethrin 1987present
Alphacypermethrin 1987present
Chapter.1 13/7/00 9:29 am Page 5
large and inuential research project
known as the Huffaker Project (19721979;
which was continued in the 1980s as the
Atkinson project) focusing primarily on
insect pest management in six crops: cot-
ton, soybean, alfalfa, citrus fruits, pome
fruits (apples and pears) and some stone
fruits (peaches and plums; Morse and
Buhler, 1997). Involving scientists from
universities, USDA and private industry
the project sought to organize research to
transcend the disciplinary, organizational,
political, geographical and crop specialism
barriers that have usually inhibited collab-
orative efforts between scientic disci-
plines. In this effort, however, and others
that have succeeded it, IPM was designed
to the specication of capital intensive,
technologically sophisticated farmers.
Ironically this was the same design for
which the high tech chemical pest control
tradition had been based, something that
IPM endeavoured to replace (Perkins, 1982;
Thomas and Waage, 1996). A different
model for the development of IPM came,
not from the intensive, high tech world of
agriculture of the west but from the
Philippines and South-East Asia. Here the
emphasis was on IPM training among farm-
ers (Table 1.2), creating sufcient under-
standing of the interaction between natural
enemies and their pest prey/hosts so that
economic thresholds are based on observa-
tion of the balance between pest and nat-
ural enemy numbers in the rice paddy
(Matteson et al., 1994). In Indonesia, after
one seasons training, farmers spraying
practices have changed from an average of
2.8 sprays per farmer to less than one per
season, with the majority of farmers not
spraying at all. There was no difference in
yields using IPM methods versus those har-
vested with nationally recommended tech-
nical packages (Matteson et al., 1994). The
concept of IPM was ofcially adopted in
Indonesia in 1979, but its implementation
was negligible because of massive pesticide
subsidies, the limited experience and
knowledge of extension personnel and
massive promotional campaigns by the
pesticide companies (APO, 1993; Morse
and Buhler, 1997). IPM adoption escalated
however, with the Presidential Decree No.
3, instituted in 1986, which banned 57
broad spectrum insecticides used on rice
and endorsed IPM as the ofcial strategy
for rice production.
At this time other governments around
the world were waking up to the need for
endorsing IPM. In 1985 India and Malaysia
declared IPM Ofcial Ministerial Policy, as
did Germany in 1986. IPM was also
implicit in the Presidential Declaration in
the Philippines in 1986 and Parliamentary
decisions in Denmark and Sweden in 1987.
In 1992 at the United Nations Conference
on Environment and Development, Agenda
21, Rio de Janeiro, the Worlds Heads of
State endorsed IPM as a sustainable
approach to pest management.
6 Chapter 1
Table 1.2. Evolution of rice IPM farmer training in Asia 1979 to present (from Matteson et al., 1994).
Period Training approach
19781984 Pilot scale, Philippines. Elaboration of IPM training principles.
Group eld training by master trainers using conventional teaching
methodology. Weekly training classes over an entire cropping season,
follow up for 12 seasons
19851989 (i) Small-scale implementation of the above by NGOs, Philippines
(ii) Large-scale implementation through several national T & V extension
systems, sometimes supported with multimedia strategic extension
campaigns
19901992 Medium scale, Indonesia. Dedicated training system in which master
trainers use participatory non-formal education methodology
Chapter.1 13/7/00 9:29 am Page 6
The political endorsement of IPM on the
international stage has come about because
of the policy shifts towards environmental
concerns that have occurred over the last
30 years. It is this concern for the environ-
ment that will remain one of the key fac-
tors driving pest management during the
next millennium.
1.2 Causes of Pest Outbreaks
The history of pest management is a subset
of the history largely of agriculture and
while pests have been a chronic problem in
agriculture since the beginning, many of
todays serious pest problems are the direct
consequence of actions taken to improve
crop production (Waage, 1993). The inten-
sication of agriculture has created new or
greater pest problems in a number of ways:
1. The concentration of a single plant
species/variety in ever larger and more
extensive monocultures increases its
apparency to pests and the number of pest
species which colonize it (Strong et al.,
1984).
2. Generally, high yielding crop cultivars
can provide improved conditions for pest
colonization, spread and rapid growth.
3. Reductions of natural enemies around
crops means that natural enemies of pests
must come to the crop from increasingly
small and more distant non-crop reser-
voirs, entering crops too late or in too little
numbers to prevent pest outbreaks.
4. Intensication results in a reduction of
intervals between plantings of the same
crop, or overlap of crops, which provides a
continuous resource to pests.
5. The search for better cultivars and
accelerated movement of plant material
around the world and with it the move-
ment of pests. Plant breeders, commercial
importers, distributors of food aid and gen-
eral commerce inadvertently introduce
pest species.
6. Virtual reliance on chemicals leading
to an increase in pest problems particularly
for insects.
One of the factors inuencing the
increased introduction of exotic insect
species has been the increase in importa-
tion of foreign products and materials. In
the absence of their normal natural enemy
complex or of environmental constraints
these introduced species may become pests
and cause extensive damage to crops or
livestock. Pests may also be transported to
countries in which they are not indigenous
by the introduction of new crop types or
animal breeds, with similar results. In gen-
eral, it is such changes in agricultural prac-
tices as the introduction of new crop
species or enlargement and aggregation of
elds, use of monocrops and plant density,
that have been held responsible for causing
many pest problems. Risch (1987) cited:
1. The changes in crop cultivars relative
to those of wild relatives.
2. The simplication of agroecosystems
compared with natural ecosystems as being
the most important contributing factors.
The former occurred because the success-
ful control of insect pests with insecticides
in the 1950s and 1960s allowed plant
breeders to concentrate on developing new,
high yielding cultivars in the safe knowl-
edge that the insects were taken care of
cheaply and effectively with insecticides.
Hence, the breeders focused their attention
more on attaining outstanding yields than
on producing insect resistant cultivars
(Ferro, 1987). Insect outbreaks then
occurred on cultivars having no natural
levels of insect resistance when the insecti-
cide umbrella was removed (brought about
by insects resistant to insecticides).
The second important contributing fac-
tor, the reduction of diversity in large crop
monocultures, has long been associated
with reasons for pest outbreaks. The rea-
sons for this are that a monocrop is thought
to provide a highly suitable habitat for a
pest, but a highly unfavourable one for the
pests natural enemies, thus creating condi-
tions appropriate for outbreaks. However,
more recently it has generally been recog-
nized that outbreaks are not an inevitabil-
ity of such trophic simplicity (Redfearn
Introduction 7
Chapter.1 13/7/00 9:29 am Page 7
and Pimm, 1987), an idea long recognized
in forest entomology. Monocultures do
occur in natural ecosystems, e.g. bracken,
heather or natural forest. The establish-
ment of species in monocrop plantations is
certainly not a radical departure from this
and should not automatically make them
more vulnerable to pests (Speight and
Wainhouse, 1989). In forest systems in par-
ticular it has been shown that cyclical pest
outbreaks can occur as a consequence of
natural changes in the physiological condi-
tion of the host, with weather often playing
an important role (Berryman, 1987; Speight
and Wainhouse, 1989).
Insect outbreaks, especially of migratory
pests, are often associated with particular
weather patterns, e.g. outbreaks of the
desert locust and Spodoptera spp. The
weather can also directly affect pop-
ulation development, if temperatures are
favourable for population growth at an
appropriate period during the insects life
cycle then outbreaks can occur, e.g. mild
winters in the UK are associated with out-
breaks of cereal aphids. Weather can pro-
duce a differential development of pests
and their natural enemies causing a de-
coupling of their association and thereby
permitting an unregulated pest population
increase.
In effect, the goals of agricultural inten-
sication are being undermined by pest
problems that are now inadvertently the
result of that very process. Sustainable
agriculture and hence, sustainable pest
management required nding solutions to
these pest problems which protect the
goals of intensication (Thomas and
Waage, 1996).
Insect outbreaks can be triggered
through intervention by man, i.e. through
the use of insecticides, irrigation, fertil-
izer or cultivars lacking resistance to
insects. Of these, it is insecticides that
have had the most widespread inuence
on insect pest outbreaks. They can be an
indirect cause of insect pest outbreaks by
a number of means including reduction of
natural enemies, removal of competitive
species and secondary pest outbreaks, and
through the development of insecticide
resistant insects. The use of broad spec-
trum insecticides (which is now on the
decline) can cause the destruction of both
pest and natural enemy populations, but
the ability of the pest to then rebound in
the absence of the natural enemy can lead
to an outbreak. Secondary pests occur
when an insecticide differentially affects
the major pest relative to minor ones.
With the subsequent destruction of the
major pest, competition is removed,
allowing the minor pests to exploit more
effectively the resource, and an outbreak
ensues. The situation where insect out-
breaks occur because of the development
of insecticide resistance is well known.
Insecticides that are given repeated wide-
spread application create a situation in
which there is intense selection pressure
for resistant individuals. These individu-
als can then proliferate in the insecticide
treated area and cause subsequent out-
breaks.
In addition to all of these factors the
changes in consumer requirements for
insect free produce in the USA and Europe
have been one driving force behind the
need to control insects at lower densities
than before. Such shifts in consumer stan-
dards have meant that some insects are
controlled beyond the point at which they
are causing physical losses to the crop or
animal. More recently demand for organic
or green products has created a market at
the other end of the spectrum. These are
items of food, etc. that have been produced
using only environmentally friendly tech-
niques, excluding the use of chemicals
such as insecticides or herbicides. With
premium prices being paid for such green
or blemish-free products then economics
or aesthetics determine the level of infesta-
tion at which an insect is regarded as a
pest.
Thus, consumerism and the needs of the
consumer inuence pest management prac-
tices. There are a whole range of stakehold-
ers as well as consumers who inuence pest
management, how it has developed in the
past and how it will develop in the future.
8 Chapter 1
Chapter.1 13/7/00 9:29 am Page 8
1.3 The Stakeholders in Pest
Management
Stakeholders are individuals and groups of
individuals who have a vested interest in a
particular issue, cause or enterprise. Their
expectations are built on past experiences,
assumptions and beliefs and will reect
specic organizational structures (Collins,
1994). Within pest management there are
numerous stakeholders who can include,
for instance, shareholders, managers,
employees, suppliers, customers and com-
munities who are all linked to different
degrees to a commercial company that pro-
duces a chemical insecticide. The various
stakeholders, both between and within
groups, can be placed in a hierarchy where
the stake each has in the enterprise is sim-
ilar and inuences the stakeholder group
in the tiers below it. In pest management
the rst tier stakeholders tend to be govern-
ments and international agencies, the sec-
ond tier pest management scientists and
extensionists, the third commercial compa-
nies, the fourth farmers and growers and
the fth tier is the consumers, customers
and communities that are the beneciaries
(or otherwise) of the decisions made and
implemented by the tiers above. The lower
tier stakeholders may also exert some inu-
ence over those stakeholders above them.
In order to understand pest management,
how it has reached where it is today and
how to identify where it is going in the
future it is necessary to understand some-
thing of the motives and interests of each
stakeholder group.
1.3.1 Governments, politics and funding
agencies
The stakeholders in government need to
establish policies that will work to the ben-
et of all other stakeholders. Since other
stakeholders in pest management are so
diverse in their interests and needs, gov-
ernments perform a balancing act, selecting
policies that will often reect a compro-
mise so that no one group of lower tier
stakeholders wholly benets and none lose
out completely. Governments are responsi-
ble for funding public research interests in
its institutes and universities; they are also
responsible for ensuring that commercial
companies generate new products which
need to be manufactured, employing peo-
ple, generating wealth, paying taxes.
Governments also need to ensure that food
is available at an appropriate price and
quality and that the means by which it is
generated does not degrade our environ-
ment. Hence stakeholders in government
seek to look after the interests of farmers,
consumers and communities, through
funding research and supporting industry
where possible.
During the industrialization of agricul-
ture at the end of the 19th century the gov-
ernment policies sought to provide cheap
food for a growing urban population, hence
agriculture was targeted for investment and
support. However, this process tended to
benet larger farmers through the
economies of scale and reduced labour
costs from mechanization, at the expense
of small holders. The arrival of pesticides
was greeted with euphoria since it allowed
far more control of the system and assisted
the process of agricultural industrialization
(Perkins, 1982; Morse and Buhler, 1997).
Government policies including tax incen-
tives made the production and use of pesti-
cides attractive to business and farmers.
Pesticide development, production and use
became institutionalized and farmers
became increasingly dependent (Zalom,
1993). For many years after World War II
governments needed to demonstrate the
availability of surplus food as a political
tool. Even though in the late 1950s and
early 1960s the problems with pesticides
became increasingly apparent, politically
agricultural production had to be main-
tained. Rich farmers, the agrochemical
industry and food consumers all wanted
the benets of the system in spite of the
public concern over the environmental
impact (Morse and Buhler, 1997). The
problem for the stakeholders and govern-
ment was how to maintain production,
protect the environment and maintain an
economically viable agribusiness sector.
Introduction 9
Chapter.1 13/7/00 9:29 am Page 9
However, with increasingly obvious envi-
ronmental concerns raised about pesti-
cides, the increased awareness of the
general public of these issues, they became
politically more important. Hence, a
change of policy which allowed for envi-
ronmental issues to be addressed but that
did not impact too heavily on the agribusi-
ness was required. The solution to the
problem has been IPM.
1.3.2 The research scientists
The development of an IPM programme
requires detailed knowledge of an agro-
ecosystem, its component parts and how
they interact; pest management is knowl-
edge intensive. Generation of this knowl-
edge is the job of scientists. It has been
argued that IPM is the creation of scien-
tists, and it is scientists who have largely
controlled its evolution, albeit subject to
various pressures (Morse and Buhler,
1997), and hence, the IPM approach should
be seen primarily in terms of their desires
and agenda.
It has been argued, often with justica-
tion, that IPM and research into IPM are not
driven by principles but by the need to
solve emerging problems. Certainly this
would often seem to be the case. IPM was
itself developed in response to emerging
problems, mainly those associated with the
misuse of insecticides, and alternatives and
solutions to many pest problems are contin-
ually being sought. The principles of IPM
are rarely applied because few scientists
take on a management programme at the
level at which they can be applied. Usually,
because of human nature, a failing strategy
will not be replaced by a new one (IPM) but
different ways of adapting the existing strat-
egy will be tried in order to minimize the
extent of the failure. Hence, much of the
research in IPM has been a response to a
changing problem simply because scientists
are usually reluctant to admit failure or to
give up on an approach or idea. It is often
much easier to advocate the need for a new,
state of the science technique with which
to shore-up a failing approach, than it is to
admit failure and start again.
There is a tendency within IPM to
develop and employ control measures that
can provide only a short-term solution to
the problem. Such measures can work
effectively only over a limited time scale
because as soon as their use becomes wide-
spread pests will adapt them and render
them useless, e.g. prolonged use of a single
insecticide, vertical resistance in crop
plants and the use of genetically engineered
crop plants. All of these examples provide
only short-term answers to pest problems,
but each also produces a research/develop-
ment treadmill from which there is no
escape. This may provide work for
researchers and short-term economic gains
for commercial companies, but it does not
ultimately solve pest problems, or con-
tribute a great deal to the development of
sound insect pest management strategies.
Despite this, many techniques gain accep-
tance within the framework of IPM because
each new technique could be claimed to
provide another weapon to be added to the
pest control armoury. Diversity is funda-
mental to pest management, hence any
technique can be justied and proclaimed
under the IPM banner.
Control measures usually pass through a
period during which they represent the
new, in vogue approach. The develop-
ment of transgenic crop plants is one such
example currently receiving a great deal of
interest and, of course, funding. While it
cannot be denied that transgenic crops will
have a major inuence on crop protection
in the future there is also the serious possi-
bility that insects will quickly develop
means of circumventing engineered resis-
tance mechanisms. It should be remem-
bered that we have been through this
situation before, where a product held
immense promise and received extensive
funding, only to nd after years of research
that the approach was applicable only to
certain situations, e.g. male sterile tech-
niques, mass trapping with pheromones,
juvenile hormones and monitoring with
pheromones.
The changes in seasonal abundance of a
pest are easily described but much less
10 Chapter 1
Chapter.1 13/7/00 9:29 am Page 10
easily explained. The research commit-
ment required to describe a process and
that necessary to explain it involve differ-
ent orders of magnitude. Processes that
inuence population growth are rarely eas-
ily explained. Often, the more research that
is carried out, the more questions arise,
and the complexity of the problem
increases. The understanding that is cen-
tral to the philosophy of IPM necessitates
an in-depth enquiry by scientists into the
complexities and subtleties of insect biol-
ogy and ecology. Such studies can easily
become further and further removed from
the original question that prompted the
research. While it is necessary to study a
subject in detail in order to understand
how it functions, there is a danger that the
research can get so far removed from its
original objectives that the nal results are
inapplicable.
In each case, whether there is the need
to shore up a failing strategy, the develop-
ment of new solutions to pest problems
(often products for the agribusinesses
which are unsustainable when in wide-
spread use), the need for a greater under-
standing of a particular pest/crop system, it
is scientists who benet, it is science that
is required to provide the answers. All this
is in the context of a sustained, consistent
erosion of the base budget for agricultural
research and extension over the last 20
years in the US (Zalom, 1993) and in the
UK (Lewis, 1998). Hence, there has been
tremendous pressure on research budgets
but the public sector scientists have man-
aged to diversify the number of options
studied under the umbrella of IPM. The
downside has been that with dwindling
resources funding agencies at national and
international levels have called for collabo-
rative multidisciplinary research pro-
grammes where the idea has been to make
more effective use of limited resources
(Dent, 1992). In doing so, however, spon-
sors have taken little account of the con-
straints of the specialist nature of research
in relation to developing multidisciplinary
programmes, the appraisal and reward sys-
tems (Zalom, 1993), organizational struc-
tures and management systems (Dent,
1995), all of which are geared towards
specialism and not interdisciplinary
approaches. Despite the obvious role for
interdisciplinary research in integrating
control measures at a research level the
statement made by Pimentel in 1985 still
remains largely true today that: most
remain ad hoc efforts by individual pest
control specialists, each developing so-
called integrated pest management pro-
grammes independently of one another.
1.3.3 Commercial companies
Commercial enterprises generate income
through the provision of services, products
or a combination of the two. Within
agribusiness there is a greater emphasis on
manufacturing and sale of products rather
than the service side of the industry.
Growers expect to budget for tangible items
such as machinery, pesticides and fertilizer
but the concept of purchasing, for example
advice, is less acceptable (Zalom, 1993).
Hence, product inputs tend to dominate
agribusiness in general and in pest manage-
ment control products have gained in
importance since the turn of this century.
Whereas chemical pesticides were the pre-
dominate type of control product in the
1960s, since that time there has been a pro-
liferation of different types of pest manage-
ment products including: monitoring
devices (e.g. insect traps); biopesticides
(e.g. Bt); semiochemicals (e.g. for mating
disruption); insect parasitoids (e.g.
Trichogramma spp.) and predators (e.g.
Chrysoperla carnea) and most recently
genetically manipulated crop plants (e.g. Bt
cotton). All of these products are purchased
as off-farm inputs which generate an
income for the commercial company and
reduce the risk for the farmer. Some prod-
ucts are more successful in this than others
so that a number of products service large,
generally international markets while oth-
ers meet the demands for smaller, more
local and specic markets. In general, how-
ever, commercial companies are searching
for products which have a range of charac-
teristics (Box 1.1) that will ensure their
Introduction 11
Chapter.1 13/7/00 9:29 am Page 11
uptake and sustained use over many years
and provide an adequate return of the
investment necessary to develop, produce,
market and sell them. Hence, provided a
product life cycle is sufciently long to gen-
erate a suitable return on the investment,
then a company will have achieved its
objective. There is no need for a sustain-
able product per se; all income generated
above the required return is a bonus, which
is why the concept of a product treadmill
is not such an anathema to the commercial
stakeholders, as perhaps it is to others.
Commercial companies are not in the busi-
ness of alleviating the worlds pest prob-
lems, but rather providing solutions that
will generate a viable income and maintain
the longer term prospects of the individual
companies. The pest control business is
worth billions of dollars worldwide each
year, its presence inuences the whole phi-
losophy of pest management, continually
driving for new technologies which can be
sold as off-farm inputs, feeding and main-
taining the demand for its products. The
commercial company stakeholders are
major players in pest management affecting
agricultural policy, R&D and farmers
expectations and needs. The wealth and
taxes, the employment and the assurance
they generate provide a powerful incentive
for their continued role in the future.
1.3.4 Farmers and growers
Users of insect pest control technologies
are not a uniform group. Even among farm-
ers and growers there is a tremendous
diversity, so that pest management means
different things to different individuals,
farmer groups and communities. The
awareness and level of understanding of
IPM among growers in the UK differs
among the horticultural and agricultural
arable sectors (Bradshaw et al., 1996). This
is not surprising since IPM has been prac-
tised in the horticultural sector for over 20
years, when it was introduced due to prob-
lems with insecticide resistance. The same
types of problems have not occurred in the
agricultural sector and hence IPM has been
slower to catch on.
Farmers objectives may vary. They may,
for example, be interested in the maximiza-
tion of prot or alternatively the minimiza-
tion of risk (Zadoks, 1991). In subsistence
farming food security will be the primary
objective whereas reduction of labour may
be secondary. In general a hierarchy of
objectives may be expected (Norton and
Mumford, 1983). A growers perception of
risk can be a function of loan and contrac-
tual commitments, which may require
them to follow prudent practices to meet
yield or quality objectives (van den Bosch,
1978; Zalom, 1993). The practices they
adopt for control of insects may also be
market driven and if that means reducing
pesticide residues through adopting the
principles of IPM then this is what the
farmers will do. Farmers will adopt prac-
tices that are expedient in the face of risk,
are available and secure them a satisfactory
livelihood.
Farmers have often been viewed as
passive recipients of pest management
technologies, however, this view is
changing and farmers tend now to be seen
as an integral part of the pest manage-
ment stakeholder network, with a role in
dening pest control needs, evaluating
their effectiveness and inuencing their
wider adoption. Farmers, more than any
other group are sensitive to customer
needs and the more competitive and
intensive farming becomes the more con-
sumers will dictate the pest control prac-
tices adopted by farmers.
12 Chapter 1
Commercial value
Broad spectrum effects
Generally applicable
Easily marketable
High performance
Reliable
Visibly effective
Low hazard and/or toxicity to humans
Box 1.1. Characteristics of products sought by
commercial pest control product companies
(from Dent, 1993).
Chapter.1 13/7/00 9:29 am Page 12
1.3.5 Customers and consumers
Consumers in developed countries have
increasingly high expectations concerning
food quality. It is now unacceptable for
insects, their body parts or frass to be
found on fresh produce or packaged prod-
ucts. In addition, there is increasing con-
cern about pesticide residues on food
despite, paradoxically, the fact that the use
of pesticides provided the means by which
pest free produce rst became possible,
and now continues to make high cosmetic
standards realizable. High quality stan-
dards have largely been imposed by gov-
ernment agencies on producers, processors,
packers and retailers in response to con-
sumer concerns (Zalom, 1993). It will be
the need to maintain consumer condence
in the food industry that will continue to
drive other stakeholders to invest in safe
technologies. This approach is being mir-
rored in developing countries wherever
they serve developed country markets that
demand high quality standards.
The views of the general public on the
perceived environmental hazard posed by
some pest control measures, particularly
pesticides, continues to have an impact on
pest management at all stakeholder levels.
The concerns rst expressed in Silent
Spring have been maintained in the public
arena by vociferous groups committed to
environmentalism. These groups which
initially campaigned successfully to main-
tain a high prole on the problems with
pesticide use are now equally vigilant and
vocal concerning the potential hazard
posed by genetically manipulated crop
plants. Public concern may yet signi-
cantly inuence the widespread use of
these and other novel control measures.
1.3.6 Balancing costs and benets
Pest management that may be good for
individual farmers is not necessarily good
for farmers in aggregate, or society at large
(Mumford and Norton, 1991). Different
conicts of interest occur between differ-
ent segments of society and hence value
judgements must be made about the rela-
tive claims of consumers, farmers, com-
mercial companies and scientists. The
responsibility ultimately lies with politi-
cians and hence on political judgements
rather than economic, scientic, environ-
mental facts. Policy makers face difcult
decisions on what constitutes success in a
pest management policy. The traditional
view that what is good for individual
farmers must be good for society (Perkins,
1982) no longer holds true. The political
importance of farmers is waning and that
of the consumer increasing. The general
public have an increasing scepticism
about science and with concern for the
environment, food safety and occupa-
tional health growing political issues,
there will be an increasing number of con-
icts of interests between consumers and
scientists, agribusiness and farmers.
Resolution of these conicts through the
development of acceptable pest manage-
ment strategies is only likely to occur if
the policy makers understand the objec-
tives of each group and can work towards
compromise policies that attempt to bal-
ance costs and benets among all stake-
holders (Mumford and Norton, 1991).
Introduction 13
Chapter.1 13/7/00 9:29 am Page 13
2 . 1 I nt roduct i on
Monitoring in insect pest management can
be used to determine the geographical dis-
tribution of pests or to assess the effective-
ness of control measures, but in its widest
sense monitoring is the process of measur-
ing the variables required for the develop-
ment and use of forecasts to predict pest
outbreaks (Conway, 1984b). Such forecasts
are an important component of pest man-
agement strategies because a warning of the
timing and extent of pest attack can
improve the efciency of control measures.
A forecast may take the form of a simple
warning of when to spray insecticides,
based on the occurrence of the pest, or a
more complicated forecast by prediction
(Hill and Waller, 1982). Inevitably the type
of forecast that can be provided will
depend on the insect pest and the effective-
ness of the monitoring programme, but
without reliable forecasts of outbreaks the
outlook for judicial use of insecticides
remains poor.
Central to any insect pest monitoring
programme is the sampling technique that
is used to measure changes in insect abun-
dance. Although supplementary informa-
tion about the insects life history and the
inuence of weather may be needed to pro-
duce a pest forecast (Hill and Waller, 1982),
the pest sampling techniques provide the
basic estimate by which the state of the
system is assessed. The estimate of pest
abundance or change in numbers provides
the essential measure by which control
decisions are often made. Hence, it is
important that the sampling technique
used in any monitoring programme is
appropriate and robust.
A great deal of research effort is directed
at developing sampling techniques and
devices, particularly insect traps, that may
be used for monitoring. Given the amount
of research that is carried out there are sur-
prisingly few working monitoring systems
that provide reliable forecasts. Research on
insect traps provides an easy means by
which large amounts of apparently useful
data can be obtained; the continuing prolif-
eration of papers on pheromone trapping
provide ample evidence of this. A great
deal of trap catch data has been collected
and analysed for many insect species, and
various trap designs, placed at different
positions, using different lures and doses,
but in general few scientists have seriously
considered why and how these variables
inuence trap catch, or how traps may be
improved on the basis of such an under-
standing. Often this is because such work
requires painstakingly detailed experimen-
tation or extensive direct observational
studies (e.g. Vale, 1982a). Most insect traps
provide only relative estimates (see below)
and as such are particularly prone to
changes in environmental conditions, with
the consequence that data collected on dif-
ferent occasions are not strictly comparable
2
Sampl i ng, M oni t or i ng and Forecast i ng
14
Chapter.2 10/7/00 11:06 am Page 14
Sampling, Monitoring and Forecasting 15
unless conditions have remained static.
This provides a major drawback in their
use but, surprisingly, since the 1960s
(Johnson, 1950; Taylor, 1962a, 1963) there
have been few serious attempts to explore
and evaluate the extent of this problem.
Instead the effects have been either ignored
or just described by linear regression
analysis of trap catch against environmen-
tal variable. Insect traps provide the most
popular form of monitoring device for
entomologists, but if the development of
monitoring and forecasting systems is to be
given the serious consideration it deserves
then there is a need for a move away from
empirical eld studies towards a more crit-
ical evaluation of trap development and a
greater realism about the potential of traps
to provide robust and reliable monitoring
and forecasting systems (Wall, 1990).
One of the problems that has plagued
the development of effective monitoring
systems is that, initially, sampling often
only takes place as part of a study of the
ecology and biology of a pest insect. As
data accrue there is an increased tempta-
tion to make as much use of the data as
possible. The data may then be analysed to
determine whether or not they can provide
forecasts of pest abundance. If useful rela-
tionships are not immediately apparent
then further studies may be conducted to
obtain more information on factors affect-
ing trap efciency, such as the weather,
crop phenology, moonlight, etc. If the rela-
tionships prove to be useful then a forecast
may be devised, but all too often it is only
at this late stage that the practicalities of
implementation are considered. The objec-
tives of a sampling programme must be
clearly dened at the start and if the objec-
tives are those other than the development
of a monitoring and forecasting system,
they may need to be carefully scrutinized
and redened at a later stage. It is only by
carefully dening the objectives of the
research that the extent of the complexity
and difculties of devising an appropriate
monitoring and forecasting system can be
appreciated and the research directed in a
meaningful way. There is a great need with
monitoring to get away from the look and
see approach which has dominated the
subject in the past.
A good understanding of sampling the-
ory is essential for research on insect moni-
toring as well as every other component of
insect pest management. The basic con-
cepts of sampling theory are dealt with in
this chapter simply because of their obvi-
ous direct relation to monitoring. Aspects
of sampling relevant to other components
of insect pest management are considered
in appropriate chapters. The aim of the
chapter is to provide both a basic frame-
work of information on sampling, monitor-
ing and forecasting and an insight into
some of the problems confronting scien-
tists working in this eld.
2 . 2 Sampl i ng
Reliable estimates of pest incidence must
be based on samples that are representative
of the range of insect abundance encoun-
tered in the area of interest. Bias, due to an
individuals preference for certain sam-
pling sites, should not be introduced. The
inuence of this kind of bias can be
avoided by the use of an appropriate sam-
pling pattern. The most commonly used
patterns involve random and stratied ran-
dom sampling. Systematic sampling pat-
terns are less widely used and in general,
data obtained in this way cannot be
analysed statistically (Southwood, 1978).
2 . 2 . 1 Random, st rat i ed random and
syst emat i c sampl i ng
Random sampling involves selecting a
number of samples from a population such
that every sample has an equal chance of
selection. The simplest method for eld or
tree crop studies is to base the sampling
pattern on coordinates selected from ran-
dom number tables.
Stratied random sampling differs from
random sampling only in the division of
the population into different strata from
which random samples are then taken. The
strata are subdivisions of the samples
Chapter.2 10/7/00 11:06 am Page 15
based on knowledge of the distribution of
the population; for example, insects may
exhibit different preferences for particular
plant parts. The strata reect real differ-
ences in population levels while each stra-
tum consists of a more homogeneous
subpopulation. The number of samples
taken in each stratum may be varied
according to the variance encountered
within that stratum. Hence, stratied ran-
dom sampling may produce a gain in preci-
sion and efciency in the estimate of the
size of the whole population. However,
these advantages can be obtained only
when the proportions of the population in
the different strata are known. The sample
size would be less than that indicated for a
simple random sample only when the stan-
dard deviation within strata is known to be
less than that for the population as a whole
(Church, 1971).
Systematic sampling involves taking
samples at xed intervals. The size of the
xed interval and the reference or starting
point for the intervals are chosen, within
dened limits, from random number tables.
The rst sample is taken at the reference
point and subsequent samples at succes-
sive intervals beyond that, e.g. for a xed
interval of 10 units and a reference unit of
15, samples would be taken at intervals of
15, 25, 25, 14 , etc.
The systematic sample and the stratied
random sample patterns may appear simi-
lar but they differ in that the systematic
sample units occur at the same position in
each stratum, whereas with stratied ran-
dom sampling the position in the stratum
is determined at random (Cochran, 1977)
(Fig. 2.1). The systematic sample is spread
more evenly over the population, and in
some circumstances this can mean that it is
a more precise sampling method than ran-
dom stratied sampling (Cochran, 1977).
Researchers should always be aware that if
an insect attack is distributed systemati-
cally then a systematic sampling pattern,
which did not coincide with the pattern of
distribution of the insect, may lead to error
(Walker, 1981).
The sampling procedures used by
research workers are usually carried out
with due regard for statistical requirements
with the aim of obtaining reliable and
accurate population estimates. These esti-
mates are then often used to develop moni-
toring and forecasting programmes for use
by farmers and extension workers. A moni-
toring programme based on estimates
derived from sampling techniques used by
scientists that requires similar sample
inputs from farmer or extension workers is
unlikely to be appropriate. Farmers and
extension workers cannot be expected to
obtain a large number of random samples;
sampling at this level needs to be adapted
to the farmers needs, i.e. the sampling
method should be uncomplicated and not
too intensive. This may mean adopting a
pseudo-random or systematic sampling
pattern. That is, a pattern that mimics ran-
domization or systemization as closely as
is practicable. This leaves scientists with
two choices, they can either develop a
monitoring programme using sampling pat-
terns and techniques that are appropriate
for farmers, or after developing a pro-
gramme modify it for farmer use. To date,
scientists more commonly adopt the latter
approach but in the end leave it to the
extension staff to modify the technique for
farmer use!
16 Chapter 2
Fig. 2.1. Systematic () and stratied random () sampling within six sampling units (k) (after Cochran, 1977).
Chapter.2 10/7/00 11:06 am Page 16
2 . 2 . 2 Sampl e si z e
There is a point in any sampling pro-
gramme when a decision has to be made
about the number of samples that should
be used. Since the number of samples
taken will inuence the precision of the
nal estimate the importance of this
should not be underestimated. Too few
samples will reduce the value of the esti-
mate (e.g. Vlug and Paul, 1986) and too
many will increase the cost of the pro-
gramme, where the cost may be measured
in terms of time, labour, equipment or
nancial outlay (Blackshaw et al., 1994).
Occasionally, a compromise will have to
be made between precision and sampling
costs due to a lack of resources. On such
occasions it may be appropriate to leave
the sampling programme until adequate
resources become available.
A decision about suitable sample sizes
can only be made with some prior knowl-
edge of the sampling variability likely to be
encountered in the proposed programme.
Such information can be obtained from
evaluation of similar experiments and/or
by carrying out a sampling pre-test. In real-
ity the former is rarely possible, not
because they are technically difculty but
because the information on which they
rely is seldom available (Perry, 1997).
However, given the importance of such
estimates for experiments or decision mak-
ing, the required level of precision can be
estimated by use of a pre-test which deter-
mines the level of sample variance in the
proposed experiment and permits the most
appropriate sample size to be dened.
The precision required, and hence the
amount of error that can be tolerated in the
sample estimate, will depend on the use to
which the estimates will be put. The gener-
ally accepted maximum level of error is
5% of the mean value, but the error should
be chosen according to the likely degree of
separation of events or treatments and
the required certainty of differentiation
between them. For instance, a trap catch
population estimate with a 25% error
would only allow a distinction between a
doubling or halving of the population size.
The number of samples chosen has a great
impact on the precision of the estimate
obtained but large increases in sample size
cause only small decreases in error.
The formula for the number of samples
required when dealing with a sample of
proportions (e.g. the proportion of plants
or plant parts infested by insects) assumes
random sampling and an a priori knowl-
edge of the value P, the probability of
occurrence. For example, approximately
30% of the plants in a pre-test were
infested with a pest insect, hence P = 0.30.
The number of samples (n) that needs to be
taken, assuming only a 5% error (c,
expressed as 0.05) is:
where:
t = Students t from statistical tables, for c
= 0.05 is 1.96
q = 1p
p = the proportion of uninfested plants or
plant parts.
The formula for determining n for contin-
uous data assumes that simple random
sampling is used. A pre-test is needed to
determine the values for the standard devi-
ation of the sample (s) and the mean of the
sample estimate (y).
where:
c = the pre-determined level of error, as
above.
Direct counts of insects on crop plants pro-
vide accurate estimates of insect numbers,
provided a large enough sample size is
used. However, direct counting may
become prohibitively time consuming if
the pest is abundant or patchily distributed
(Ward et al., 1985). In certain situations a
measure of incidence levels (any number
> 0 or proportion of plant parts or plants
infested by the insect) could be used
instead of direct counts provided the inci-
dence measures were accurate enough.
n
s
cy
=
2
2 2 ( . )
n
t pq
c
=
2
2
2 1 ( . )
Sampling, Monitoring and Forecasting 17
Chapter.2 10/7/00 11:06 am Page 17
Since sample size has a large inuence
over the accuracy of an estimate, the size of
sample of an incidence count required to
give an equivalent accuracy to direct
counts can be determined. Ward et al.
(1985) considered this problem and used
two different models for determining sam-
ple size with incidence counts.
1. The Probit model
where:
= the mean density
P = the proportion of plants or plant parts
infected
a and b are the intercept and slope
obtained from regression analysis.
2. The Nachman model
where:
ln = the natural logarithm
log = the logarithm to base 10.
The required sample size in each case can
be given by:
1. For the Probit model, where c is the
required sample accuracy and z is the ordi-
nate of the normal curve (from statistical
tables):
2. For the Nachman model:
The number of samples for the direct
counts can be estimated as above or from
the formula for Taylors Power Law (Taylor,
1961) which gives:
where:
a = a sampling factor
b = index of aggregation.
Ward et al. (1985) compared the different
models using incidence counts and mean
densities of cereal aphids on winter wheat
(Fig. 2.2). At very low densities ( = 0.1
aphids/tiller) n was very large for both
incidence and direct counts. As the den-
sity increased, the sample size for direct
counts declined steadily whereas the sam-
ple size from both incidence models
declined but then increased again. At
mean densities of less than one aphid per
tiller there is little difference in the sam-
ple sizes required for incidence and direct
counts, but at mean densities between 1
and 10 aphids per tiller, then up to three
times the number of samples need to be
taken to give an equivalent accuracy of
incidence counts compared with direct
n
a
c
b
>
2
2
2 7 ( . )
n
b P
c P P
>
( )
[ ]
( )
2
2 2
1 1
2 6
ln
( . )
n
b P P
c z
>
( )( )
2
10
2
2 2
1
2 5
ln
( . )
log log ( . ) = +
a b
P
ln
1
1
2 4
log ( . ) = +
( )
a b P probit 2 3
18 Chapter 2
Fi g. 2 . 2 . Minimum sample sizes for population
estimates () with a required level of accuracy of
CV = 0.1; using direct counts () and incidence
counts assuming the Probit ( ) and Nachman
( ) models (after Ward et al., 1985).
Chapter.2 10/7/00 11:06 am Page 18
counts (c = 0.1 in this case). At higher
densities the minimum sample size for
incidence counts increases markedly, but
because incidence counts are made easily
and take little time, the use of a large sam-
ple size may more than compensate for
the time it would take for direct counts at
the same densities. Obviously in selecting
a monitoring procedure attention should
be paid to both the accuracy required and
the time involved in the sampling.
2 . 2 . 3 Sampl e i ndependence and i nt eract i on
One of the fundamental principles of sam-
pling theory is that the measurement of
units in one sample does not inuence or
bias the estimate of a second sample, so
that the samples remain independent.
Relative estimates are particularly prone
to problems associated with sample inter-
action. The size of the active area (e.g.
the distance for which the pheromone is
observed to initiate a response) of a trap is
often variable and difcult to measure.
Sampling involving a number of traps
may be subject to unquantied interaction
effects if they are not spaced at a distance
sufcient to prevent interaction (van der
Kraan and van Deventer, 1982). The inter-
action may increase or decrease the size
of a traps catch above that of a solitary
unbiased trap. Studies of pheromone trap
catches of Cydia nigricana have shown
that when interaction does occur, both the
number and the position in a line of traps
affect the size of each trap catch, and that
these interactions are further modied by
the orientation of the line to the mean
wind direction (Perry et al., 1980).
Pheromone traps are difcult to work
with in this context because their active
areas are suspected to be large (e.g. 300 m
for Trichoplusia ni; Kishaba et al., 1970;
Toba et al., 1970) and particularly suscep-
tible to the inuence of the direction and
speed of the wind.
Sampling, Monitoring and Forecasting 19
Case St udy: The effect of t rap spaci ng on t rap cat ch of Er i oi shi a
brassi cae ( Fi nch and Ski nner, 1 9 7 4 )
A study of the inuence of trap spacing on catch in various types of water trap
was carried out with the cabbage root y (now Delia radicum). Finch and
Skinner (1974) considered the inuence of different trap densities (one, four,
nine, 16 and 25 traps) on the mean catch of four types of trap: non-uorescent
traps; uorescent traps; water traps and allyl isothiocyanate (ANCS) traps (Fig.
2.3). The mean catch of traps that are not interacting should remain the same
irrespective of trap density (the non-uorescent water trap, Fig. 2.3) since each
trap performance is unimpaired by other traps. Previous experiments had shown
that the non-uorescent water traps were only attractive at a range of 0.75 m. At
the closest spacing in this experiment of 2.2 m there was no overlapping of trap
active areas and trap catch did not increase with increasing distance between the
traps. Some overlapping was apparent with the uorescent yellow trap at trap
spacings below 5 m (Fig. 2.3) and indicated a trap active distance of approxi-
mately 2.5 m. The mean trap catches of the two traps using the attractant, ANCS,
were still increasing at the widest trap spacing of 8 m (Fig. 2.3) indicating that
there was still some trap active area overlap. The attractant increased the active
area of the traps, and hence they would need to be spaced further than 8 m apart
before they could even be considered as acting as independent samples.
Chapter.2 10/7/00 11:06 am Page 19
Studies of sample interaction are few
and far between despite its obvious
importance in determining the minimum
spacing required to prevent unbiased sam-
pling (see Case Study). Attempts to
remove bias from sampling by using
appropriate spacing may provide a rela-
tively simple method of increasing the
accuracy of the sample estimates.
2 . 3 Popul at i on Est i mat es
Basic estimates of populations are required
in IPM in order to understand the popula-
tion dynamics of a pest species and as the
basis for making management decisions
relating to monitoring and forecasting lev-
els of pest abundance and distribution.
Sampling insect pest populations for the
purpose of monitoring for instance, can be
carried out using absolute and/or relative
estimates of pest abundance. Such sample
estimates may be based on different life
stages of the insect population whose
growth will be dependent on the reproduc-
tion, mortality and dispersal. The ability to
monitor populations and forecast pest out-
breaks is very much dependent on having a
knowledge of the population estimates of
insect natality, development, mortality and
dispersal.
2 . 3 . 1 Absol ut e est i mat es
An absolute estimate can be dened as a
count of insect numbers with reference to a
predened unit of measure. The count per
unit measure provides an estimate of insect
density and can be recorded in terms of unit
area, volume or as numbers per animal,
dwelling, plant or plant part, e.g. numbers
of eggs per leaf, the number of larvae per
20 Chapter 2
Fi g. 2 . 3 . The mean number of female cabbage root ies caught at various trap spacings in a crop
of swedes: non-uorescent traps in 1971 (), uorescent traps in 1972 ( ), water traps
(), ANCS traps () (after Finch and Skinner, 1974).
Chapter.2 10/7/00 11:07 am Page 20
plant, the number of pupae per square
metre. Absolute estimates are measures of
the actual insect density and are directly
comparable in time and space. Quadrats
(e.g. Sunderland et al., 1995) and emergence
cages are examples of absolute measures.
Sampling techniques that utilize
absolute estimates are liable to errors from
two main sources:
1. Sampling efciency may be less than
100%.
2. Errors may be made in the assessment
of insect numbers.
Sampling efciency can be dened as a
measure of the ability to count all the
insects in a chosen sample. Sampling ef-
ciency may vary according to the density
of the insects, the size of the insects
and/or the inuence of the sampling tech-
nique on the insect (e.g. Dewar et al.,
1982). Errors of measurement may be
caused by a poorly calibrated instrument
or by various forms of human miscalcula-
tion. Effort should be made at all stages of
a sampling programme to reduce the
errors of measurement in absolute esti-
mates. Samples for absolute estimates can
often be labour intensive and very tedious
and because of this a relative estimate is
often considered as an alternative.
2 . 3 . 2 Rel at ive est i mat es
Relative estimates are counts of insects
which do not relate to a denite unit of
area, volume, plant or plant part, etc. The
area from which the count is made is often
unknown and can vary according to imme-
diate conditions. Hence, relative estimates
are strictly comparable only on occasions
when conditions are known to be similar.
A relative estimate can be regarded as
being representative of the numbers pre-
sent and it may actually reect them, but it
is not a true count of actual insect density.
Methods most commonly used by ento-
mologists, that provide relative estimates,
are various types of insect trap, which are
generally considered useful because they
are easy to operate and they amass large
amounts of data. The problem that arises
with the use of traps and other relative
methods is the interpretation of the col-
lected data.
Sampling, Monitoring and Forecasting 21
Fi g. 2 . 4 . Average catch of Diptera in a mercury vapour light trap in relation to moon phase. Phase group 1
is equivalent to a very low moon illumination at new moon, phase group 17 is equivalent to the moon
illumination at full moon. The trend line is a 3-group moving average (after Bowden and Morris, 1975).
Chapter.2 10/7/00 11:07 am Page 21
Traps are one of two types, those that:
1. Inuence an insects behaviour in order
to attract it to the trap, e.g. light and
pheromone traps.
2. Those that have some form of mechani-
cal device for catching insects, either pas-
sively, e.g. Malaise traps and pitfall traps or
actively, e.g. suction traps.
Each trap can also be described by the
area around it from which it samples the
insects. This area may be referred to either
as an active area or a capture area, depend-
ing on the type of trap and its mode of
action. The active area is the area around a
trap within which the insects may respond
adequately to the trap stimulus and be
attracted towards it (Nakamura, 1976;
Shorey, 1976; van der Kraan and van
Deventer, 1982), e.g. the area of a
pheromone plume. The capture area is the
area around the trap towards which it is
probable that the insect will orient and
move into the active area, and thence to the
trap. A pheromone trap and light trap have
both active and capture areas, with the cap-
ture area always slightly larger than the
active area, whereas a Malaise trap that
does not attract insects has a very small
active area, the size of the trap aperture.
The capture area alone represents the area
from which these traps sample.
It is a characteristic of most traps that
the size of the active and/or capture area
varies according to the environmental con-
ditions. This can mean that trap catches are
so variable that it becomes difcult to
interpret the trap data. In order to better
22 Chapter 2
Fi g. 2 . 5 . Relationship between wind speed and hourly catch of male moths of Spodoptera littoralis at a
pheromone trap during the period of peak catches (18002200 h), 21 October to 3 November 1972 (after
Campion et al., 1974).
Chapter.2 10/7/00 11:07 am Page 22
understand trap catch data a great deal of
research has been carried out in an attempt
to quantify the effects of various factors on
trap catch: for instance, moonlight on light
trap catches (Bowden, 1973, 1982; Bowden
and Church, 1973; Bowden and Morris,
1975) (Fig. 2.4), wind speed on pheromone
trap catch (Campion et al., 1974; Lewis
and Macauley, 1976) (Fig. 2.5), wind direc-
tion on sticky trap catch (Schoneveld and
Ester, 1994) or a combination of environ-
mental factors on light and pheromone
traps (Dent and Pawar, 1988). However,
very few studies have actually managed to
dene the limitations of a particular trap-
ping technique or to provide correction
factors in order to improve the precision
and reliability of the results (Taylor,
1962a,b; Bowden and Morris, 1975).
Relative and absolute measures are both
affected by changes in specic behavioural
or physiological states of insects. This
effect is referred to as an insect phase
effect (Southwood, 1978). For example,
attractant traps depend for their effective-
ness on the response of the insect to a par-
ticular trap stimulus. The insect may only
be receptive to the stimulus at a specic
age on specic behavioural or physiologi-
cal states during its life cycle. Similarly,
non-attractant traps may depend on insect
activity that occurs only at specic devel-
opmental stages. When an insect is suscep-
tible to a trap stimulus or it is in a
particular mode of activity that makes it
susceptible to capture then its behavioural
or physiological state is considered to be in
phase with the trap (Southwood, 1978).
Many insects exhibit circadian rhythms
of activity which may include a daily
sequence of feeding, mating and oviposition
(Fig. 2.6). A specic mode of activity may
make an insect more susceptible to capture
than another mode, e.g. pheromone traps
elicit a sexually appetitive response from
insects, a response that may only be elicited
during the period of a day when an insect
would normally respond to the stimulus.
Sampling, Monitoring and Forecasting 23
Fi g. 2 . 6 . Daily periodicities in ight (), mating () and oviposition ( ) in Oncopeltus
fasciatus (after Dingle, 1972).
Chapter.2 10/7/00 11:07 am Page 23
2 . 3 . 3 N at al i t y
Natality is the rate at which new individu-
als are added to the population by repro-
duction. The vast majority of studies
addressing reproduction in insects deal
with fecundity rather than fertility due to
the difculties of measuring the latter
(Barlow, 1961). Fecundity is the total num-
ber of eggs produced or laid during the life-
time of the female insect (Jervis and
Copeland, 1996). A range of biotic and abi-
otic factors inuence insect fecundity.
Among the biotic factors there are intrinsic
factors such as insect size or clone and
extrinsic factors such as host plant effects
which may include plant species, cultivar
24 Chapter 2
Fi g. 2 . 7 . Total number of eggs laid by Encarsia tricolor females from days 3 to 20 after adult emergence at
different constant temperatures (after Artigues et al., 1992).
Fi g. 2 . 8 . Hypothetical survivorship curves (after Pearl, 1928).
Chapter.2 10/7/00 11:07 am Page 24
or growth stage (e.g. Leather et al., 1985;
Soroka and Mackay, 1991). The main abi-
otic factor inuencing fecundity in insects
is temperature. The number of offspring
produced increases with temperature up to
a critical value above which fecundity is
reduced and declines to zero (Fig. 2.7). The
nature of the relationship between temper-
ature and fecundity is rarely linear, but if it
can be dened then it can prove useful in
prediction of population growth.
2 . 3 . 4 D evel opment and grow t h
Insect growth refers to the increases in size
and weight of an insect as it passes
through different developmental stages
from egg, larva/nymph, pupa to adult. The
total development time of an insect is
dened as the period between birth and
the production of rst offspring by the
adult female (Bonnemaison, 1951).
Development times can also be determined
for the period between each instar, for
pupal development and for a preoviposi-
tion period. The rate of development of
insect eggs and pupae is strongly inu-
enced by temperature while the develop-
ment of larval or nymphal stages is
dependent on both abiotic (particularly
temperature; see Section 2.5.2) and biotic
(particularly host plant and/or diet) fac-
tors. Humidity and photoperiod have also
been shown to inuence insect develop-
ment (Subramanyan and Hagstrum, 1991;
Brodsgaard, 1994). Insect diet, host plant
species, cultivar and growth stage can all
have an inuence on insect development
times (Dent and Wratten, 1986; Yang et al.,
1994). Host/diet quality can be inuenced
by temperature and humidity and thereby
have an indirect impact on development
(Subramanyan and Hagstrum, 1991).
2 . 3 . 5 Survival and mor t al i t y
Mortality can be expressed in a number of
ways (e.g. percentage mortality, fraction
surviving; Table 2.1) or graphically as sur-
vivorship curves (Fig. 2.8). Such survivor-
ship curves are useful as a means of
depicting theoretical forms of mortality in
relation to age but they have little practical
value. A number of mathematical func-
tions have been used for this purpose, par-
ticularly the exponential model which
assumes that insect mortality rates are
independent of age (Clements and
Paterson, 1981) and the Gompertz and
Weibull functions which assume that the
probability of dying in the next interval
increases over time (Dent, 1997a; e.g.
Sampling, Monitoring and Forecasting 25
Tabl e 2 . 1 . Ways of expressing population change and age-specic mortality when stages of the insect do
not overlap (from Varley et al., 1973).
Line Eggs Small larvae Large larvae Pupae Adults
(N
E
) (N
L1
) (N
L2
) (N
P
) (N
A
)
1 Population 1000 100 50 20 10
2 Number dying 900 + 50 + 30 + 10 Sum: 990 dead
in interval
3 % mortality 90 + 5 + 3 + 1 Sum: 99% mortality
4 Successive 90 50 60 50
% mortality
5 Successive 10 50 40 50
% survival
6 Fraction 0.1 0.5 0.4 0.5 Product = 0.01
surviving survival
7 Log population 3.0 2.0 1.7 1.3 1.0
8 k-value 1.0 + 0.3 + 0.4 + 0.3 Sum k = 2.0
Chapter.2 10/7/00 11:07 am Page 25
Readshaw and Van Gerwen, 1983; Bartlett
and Murray, 1986).
Mortality in insects can be measured
either directly using markrecapture exper-
iments or indirectly by estimating the
numbers of individuals in successive
developmental stages. Markrecapture
experiments which involve various means
of marking individuals, releasing them,
and recapturing them after an interval,
have been reviewed by Reynolds et al.
(1997). The data generated by such experi-
ments can be analysed by a number of dif-
ferent models each of which makes certain
assumptions that affect their interpretation
and value. For instance, the equation of
Fisher and Ford (1947):
where:
N
t
= the population size estimated
n
t
= the total sample time at t
a
i
= the total of marked insects released at
time i
it
= the survival rate over the period, i t
r
ti
= the recapture at time t of insects
marked at time i.
This method assumes that the sampling is
random, survival rates and probabilities of
capture are unaffected by marking, survival
rates are independent of age and are
approximately constant (Manly, 1974). In
contrast to this the Manly and Parr (1968)
equation takes account of age dependent
mortality:
where:
N
i
= the population estimate on day i
n
i
= the total number captured on day i
r
i
= the total number of marked insects
recaptured on day i
a = the total number of insects marked.
The techniques for measuring stage-
frequency data, that is the survival rate and
number entering each stage, are numerous
(see Dent, 1997a). For an extensive review
of this topic see Manly (1990).
The factors that cause mortality in
insects can, of course, be natural (environ-
mental, predators, parasitoids, age) or con-
trived by man for that purpose (chemicals,
biopesticides, etc.). The most common abi-
otic factors affecting insect survival
include temperature (e.g. Shanower et al.,
1993), humidity (e.g. Kr, 1981), rainfall
(e.g. Chang and Morimoto, 1988) and wind
speed (dislodging insects from their host
plants; e.g. Cannon, 1986). The inuence
of parasitism and predation on insect pop-
ulations are considered in Chapter 6 and
those of the host plant in Chapter 5 deal-
ing with host plant resistance. In the latter,
survival is usually measured as insect
numbers or proportions of a population
surviving to adults on different host plant
species or cultivars (e.g. Bintcliffe and
Wratten, 1982).
2 . 3 . 6 M i grat i on
A generally accepted denition of migra-
tion is: persistent and straightened-out
movement affected by the animals own
locomotory exertions or by its active
embarkation on a vehicle (wind or water).
It depends on some temporary inhibition of
station-keeping responses, but promotes
their eventual distribution and recurrence
(Kennedy, 1985). Migration contrasts with
on-going vegetative movements which
include those for feeding, reproduction and
accidental displacement. Evidence for
migration of insects has been obtained by
observation such as the conspicuous arrival
of insects in places where they cannot be
accounted for by local breeding (e.g.
Pedgley et al., 1995) or experimentally by a
variety of techniques. These include vari-
ous markrecapture methods where mark-
ing may be achieved with paints and inks
(e.g. Ives, 1981), dusts and dyes (e.g. Bennet
et al., 1981), and radio isotopes (Service,
1993). In addition, it has been possible to
link insect specimens to their source loca-
tion by natural markings (e.g. phenotypic
variation of size and colour; Hill, 1993),
their elemental composition, genetic mark-
ers, the presence of pollen and mites (e.g.
Drake, 1990; Lingren et al., 1994).
N
an
r
i
i
i
= ( . ) 2 9
N
n a
r
t
t i i t
ti
=
( . ) 2 8
26 Chapter 2
Chapter.2 10/7/00 11:07 am Page 26
The arrival of a migrating population of
insects such as locusts can have a signi-
cant impact on the area in which they
alight, however, quantifying migration
itself, identifying when it will occur and in
what direction is incredibly difcult. A
number of techniques have been developed
for this purpose which include at its most
basic visual observation (e.g. Turchin et al.,
1991 who used a team of observers to quan-
tify the movements of butteries) to the
more sophisticated use of video (e.g. Riley,
1993) and radar methods (e.g. Riley, 1974;
Wolf et al., 1993; Riley and Reynolds, 1995).
The use of these methods and laboratory
techniques (e.g. static tethering, ight mills
and the use of wind tunnels) have been
reviewed in Reynolds et al. (1997).
Weather has a very strong inuence on
insect migration, particularly atmospheric
processes associated with wind elds.
Wind speed decreases near to the ground
due to the friction with the earths surface.
This layer of slower air speeds is known as
the ight boundary layer (Taylor, 1974)
and is where, when the wind speed is
lower than the insects ight speed, the
insects can control the direction (track) of
their ight. Above the ight boundary
layer, wind speeds exceed the insects
ight speed and they will be carried down-
wind, irrespective of the direction that
they attempt to y.
Migration may occur on dominant
winds or on temporary atmospheric dis-
turbances. Generalized seasonal move-
ment may be related to the prevailing
wind elds (Tucker et al., 1982) and pro-
duce characteristic seasonal patterns of
infestation. A technique known as trajec-
tory analysis can be used to back-track the
movements of insects based on prevailing
wind elds and synoptic maps of the wind
eld.
The synoptic wind eld charts are pre-
pared by meteorological stations and may
be available for reference. A back-track can
be constructed if a line segment is drawn
up-wind from the trap position of the
insect (using the wind, the ight speed
the ight time map scale). The ight
speed can be taken as either the wind
speed alone or the wind speed plus the
insects ight speed. The ight time for
each line segment should be divided into a
number of periods that correspond to the
times of the measurements used to prepare
the synoptic charts. The charts are usually
prepared every 6 hours and occasionally
every 3 hours. A 12 hour ight period
would use two or four different synoptic
charts and hence produce two or four
adjoining line segments (Fig. 2.9). A for-
ward-track can be constructed in the same
way with the line segments added in the
up-wind direction.
Trajectory analyses of this kind have
been undertaken for Spodoptera exempta
(Tucker, 1984a), Spodoptera frugiperda
and Helicoverpa zea (Westbrook et al.,
1995a, 1997). Trajectories can be assessed
Sampling, Monitoring and Forecasting 27
Fig. 2.9. Back-tracks calculated assuming
downwind movement at wind speed plus
10 km h
1
on 1.5 nights for nights in December to
March of 197374 and 197475 when there were
sudden increases (as dened in the text) of
Spodoptera exempta moths in the light-traps at
Muguga, Tengeru and Ilonga, East Africa (after
Tucker et al., 1982).
Chapter.2 10/7/00 11:07 am Page 27
directly through the use of tetroons which
are specially designed balloons that main-
tain a constant volume and drift passively
at altitudes of constant air density.
Tetroons released at the time of migration
can act as surrogate markers tracked by
ground based radar (Westbrook et al., 1994,
1995b).
2 . 4 M oni t or i ng St rat egi es and
O bj ect ives
Monitoring strategies can be roughly classi-
ed as:
1. Surveys.
2. Field based monitoring strategies.
3. Fixed position monitoring strategies.
The particular sampling technique used in
each of these monitoring strategies
depends largely on the precise objectives of
the proposed programme (Fig. 2.10).
2 . 4 . 1 Surveys, el d based and xed posi t i on
moni t or i ng
A survey may be carried out to study the
distribution of a pest, or it may involve a
study of both the distribution and the abun-
dance of a pest species. The aim of a distri-
bution survey is to locate and map the
geographical distribution of a pest species.
This may be used to assess the pest status
of a particular insect, the spread of an intro-
duced species or the spread of a mobile
endemic pest that is extending its range.
Surveys measuring both the distribution
and abundance of a pest can be used to
assess the relative level of pest infestation
and pest migration. A survey can identify
areas of relatively high infestation and may
show up seasonal patterns of occurrence in
28 Chapter 2
Fi g. 2 . 1 0 . The different monitoring strategies and factors affecting their use.
Chapter.2 10/7/00 11:07 am Page 28
different locations. Such seasonal patterns
may be related to differences in environ-
mental conditions and may provide some
understanding of factors inuencing pest
population dynamics. Levels of infestation
and/or environmental factors in particular
regions may be shown to be indicative of
impending pest outbreaks and hence used
in regional forecasts.
Survey techniques can also be used to
establish the presence of the seasonal or
sporadic movements/migration of some
pest species. A knowledge of likely source
populations and pest movement from these
areas may have potential uses in pest fore-
casting. Pest migration may also be related
to weather systems.
The aim of a eld based monitoring
strategy is to provide the farmer with a
decision-making tool. The eld based
sampling technique, which could be an
insect trap or a method of counting eggs
or larval stages, is used to collect data on
local pest population changes in a partic-
ular crop or eld. This information is
then used by the farmer to make decisions
about the implementation of control mea-
sures. Preceding this, in research terms,
eld based monitoring may form part
of a study of pest population ecology.
Information gained in this way may then
be used to produce a practical monitoring
strategy on which management practices
can be based.
Sequential monitoring is carried out
with the objective of measuring the way in
which pest numbers change over time. It
can be done in different crops, different
crop growth stages and over different sea-
sons, and may identify the development
times, mortality and generation times of
pest populations under different condi-
tions. The data may be used to determine
rates of population development which in
turn may be used to produce pest forecasts.
The damage caused may be related to lev-
els of infestation and used to determine
damage thresholds.
Field based monitoring can also be car-
ried out to follow the progress of popula-
tion development up to a pre-dened
number of insects or action threshold. This
may be any number of insects from one,
and may indicate that insecticide applica-
tion is necessary, or it may be used in
developmental models which predict the
most appropriate time to apply insecticide.
Fixed position monitoring is usually
restricted to research stations where a trap,
e.g. a suction or light trap, is maintained in
a xed position and is used to sample
insects over a number of seasons and
years. The method can be used to identify
the pest insects present at a given location,
and to compare relative changes in pest
numbers between seasons. It can provide a
general overview of pest abundance and
may be useful, if related to other pest esti-
mates, for forecasting outbreaks on a
regional basis.
2 . 4 . 2 Bi ol ogy and nat ure of at t ack
The biology of a pest and the nature of its
attack and damage it causes will inuence
the type of monitoring/forecasting strategy
that is eventually adopted. The level of
damage that can be tolerated, the number
of insects that cause this and the rate of
population increase are all important con-
cerns. However, the most important biolog-
ical criteria for determining which strategy
to adopt will be the frequency and distrib-
ution of pest outbreaks.
Infrequent but widespread outbreaks
would be most effectively dealt with
using a centralized regional monitoring/
forecasting strategy since this would
not involve farmers and agricultural
extension workers in a large amount of
unnecessary sampling during non-out-
break years. Regional centres (normally
research institutes) can continuously
monitor pest population levels and issue
warnings to farmers when an outbreak is
predicted. Infrequent outbreaks may be
caused by inuxes of highly mobile
migrant pests on weather fronts or spo-
radic disturbances, bringing insects from
source areas that may be located in other
regions, or countries. Forecasts of such
outbreaks would depend on coordination
and cooperation between monitoring
Sampling, Monitoring and Forecasting 29
Chapter.2 10/7/00 11:07 am Page 29
centres and this would be best achieved
through research institutes.
For pests that reach outbreak levels reg-
ularly each season, and for outbreak years
of infrequent pests then a eld level mon-
itoring/forecasting strategy, or at least a
farm level strategy, will be most appropri-
ate. Farm level monitoring will be satisfac-
tory where there is little variability in
infestation between elds or perhaps crops.
Where infestation is highly variable in
space then eld by eld monitoring would
be most appropriate for optimizing insecti-
cide use between elds, provided that the
costs of extensive monitoring did not out-
weigh their usefulness.
In situations where pest outbreaks are
infrequent and patchily distributed then
the chances of developing any form of
monitoring/forecasting strategy is remote.
In such cases the level of damage and
hence the economics of crop production
would be critical factors in assessing the
potential value of a monitoring pro-
gramme. Where outbreaks were frequent
but patchily distributed across a region
then a farm level monitoring/forecasting
strategy or a combination of a farm and
regional centre strategy would be most
appropriate.
2 . 4 . 3 Avai l abi l i t y and sui t abi l i t y of
moni t or i ng t echni ques
Monitoring techniques fall into two groups:
those that are only suitable for use at
research centres (where there are the neces-
sary resources available) and those poten-
tially suitable for use by farmers.
Monitoring techniques appropriate only to
research centres are techniques such as
light and suction traps that require an elec-
trical supply, or other traps that also
require trained personnel to sort and iden-
tify the insects caught. Insect-specic traps
and crop counts of insect stages that are
easily identied represent potential moni-
toring techniques for use by farmers, pro-
vided that the technique (which will
30 Chapter 2
Fi g. 2 . 1 1 . A pegboard for counting insect numbers and producing a recommendation on insecticide
application. The pegboard is divided into three parallel strips painted different colours, each of which is
drilled with 24 holes. At one end is a black band with holes for pegs prior to use. One of the painted strips is
used for counting the number of plants sampled on a diagonal transect across the eld. When the line
across the strip is reached the farmer starts sampling along the second diagonal. The other two strips are
used for counting the number of eggs or larvae sampled for two insect species. The line across the strip
indicates the action threshold for insecticide application (after Beeden, 1972).
Chapter.2 10/7/00 11:07 am Page 30
primarily have been used by scientists
developing the monitoring and forecasting
scheme) can be modied appropriately.
Monitoring techniques to be used by farm-
ers must be simple to operate or carry out
and the data easily interpreted, traps must
cost little to run and be readily main-
tained. Monitoring and forecasting meth-
ods that involve the graphing and charting
of the progress of infestation are to be
avoided unless there are opportunities for
extensive farmer training.
Techniques that require training and
supervision stretch the resources of exten-
sion workers. It cannot be stressed enough
that the monitoring must be appropriate
for the situation to which it is to be
applied. Farmers in developing countries
may be illiterate and/or enumerate so that
even simple counts of insect numbers may
provide a problem. Beeden (1972) devised
a simple pegboard for counting insect
numbers and for making an insecticide rec-
ommendation, a method which involves
no reading or writing (Fig. 2.11). The peg-
board provides a simple practical applica-
tion of a quite sophisticated monitoring
and decision making technique that is
appropriate for farmers (Beeden, 1972); it
represents a simple application that has
potential for development and extensive
use in insect pest management.
The distribution of an actual or poten-
tial insect pest species may be determined
through the use of an appropriate survey
programme. The sampling technique used
in a survey programme will depend on the
biology and life cycle of the insect in ques-
tion. Since the distribution of an insect
species is usually dependent on the mobile
winged stage of the life cycle, various aer-
ial trapping techniques are often used in
distribution surveys. Traps or other tech-
niques that have a high degree of pest
specicity and can be readily checked and
maintained are helpful in reducing the
costs of sample surveys. Pheromone traps
are particularly useful in this respect and
have been used successfully in monitoring
the spread of a number of pests in Europe
(e.g. Bathan and Glas, 1982).
The survey should adequately cover the
area of interest and individual sample loca-
tions should be chosen on the basis of what
is known about insect host preference and
general biology. The data collected from a
trap network or a eld count distribution
survey can often be used to determine the
relative levels of abundance in different
locations. Such surveys may provide some
understanding of the driving variables
behind regional population changes.
The amount and type of information that
can be gained from surveys carried out at
different locations often depends on the
type of supplementary data that is collected
or available. On their own, data of relative
levels of infestation can provide informa-
tion about seasonal changes in abundance
in different locations and may identify areas
and time of high infestation. However, this
information has limited value unless it can
be related to other variables.
If the sampling technique used is a trap
that catches mobile adult insects, a rela-
tionship between this catch and the levels
of damage, or abundance of the insect, in
adjacent crops or the surrounding area
may be required. The method of collection
of additional information, such as crop
counts, damage estimates, crop types and
growth stages must be standardized
between locations. The sampling may
need to be continued for a number of years
before it can be used in any regional fore-
casting programme. The importance of
correctly evaluating the type of informa-
tion that is going to be required in a fore-
casting programme at the start of the
sampling survey cannot be over-empha-
sized. Time and effort can easily be wasted
in collecting inappropriate data. It is not
unheard of, after a few years of a survey,
for it to be realized that relevant data have
not been collected.
The identication of an appropriate
sampling and monitoring technique in
order that the data generated can be used
for forecasting requires clear objectives and
planning. Various types of trapping device
are used extensively for monitoring, but
rarely are the ultimate uses of the data to
Sampling, Monitoring and Forecasting 31
Chapter.2 10/7/00 11:07 am Page 31
32 Chapter 2
Fi g. 2 . 1 2 . Research pathway for developing traps as monitoring devices.
Chapter.2 10/7/00 11:07 am Page 32
be generated considered at the outset. The
use of traps for the monitoring of insects is
fraught with difculties mainly caused by
the variability of trap catch data. This vari-
ability makes interpretation of the data dif-
cult and this in turn reduces the value of
such traps as monitoring devices. It is
important if traps are to be used for moni-
toring that they are developed for the spe-
cic purpose and conditions for which
they are needed. In an ideal situation a
trap would be developed and evaluated
along the lines of the scheme in Fig. 2.12.
The most critical phase of the development
occurs after the initial eld test. If success-
ful then full scale trials over a number of
sites and seasons could take place. This
could not be justied if the initial trial
were not successful, but if results were
partially successful the temptation always
exists to expand the trial with the hope
that more data will clarify the situation. A
successful monitoring procedure will pro-
vide consistent and reliable forecasts; if the
data are variable then the value of the pro-
cedure will be diminished.
2 . 5 Forecast i ng
Forecasting systems are becoming increas-
ingly sophisticated. Even the simplest are
built on statistical models, whereas the
more sophisticated require computer mod-
els and complicated specialist software.
Forecast methods are classied here
according to whether they are based on
threshold counts, physiological time, pre-
dictive models or geographic information
systems.
2 . 5 . 1 Act i on t hreshol ds
An action threshold may be dened as the
pest density that warrants the initiation of
a control strategy, usually insecticide
application. The application of insecti-
cides according to the level of infestation,
rather than on a xed schedule basis, may
reduce the number of insecticide spray
applications, or at least ensure that the
number of applications is economically
viable. Replacing the xed schedule sys-
tem with a spray when necessary strategy
requires there to be an appropriate method
of monitoring pest abundance and a reli-
able action threshold. The monitoring
technique must not involve intensive sam-
pling, especially if it is to be carried out at
regular intervals by the farmer. Traps
should be inexpensive and easily main-
tained, and catch data easily interpreted.
Action thresholds have been developed for
Cydia pomonella and Archips podana in
UK apple orchards (Alford et al., 1979),
Bactrocera oleae in olives (Delrio, 1992),
for Keiferia lycopersicella in tomato crops
(van Steenwyk et al., 1983), for Psila rosae
in carrots (Schoneveld and Ester, 1994)
and for Thrips tabaci and Acrolepiopsis
assectella in leeks (Hommes et al., 1994).
Sampling, Monitoring and Forecasting 33
Case St udy: A pheromone t rap capt ure t hreshol d of pi nk bol lwor m
mot hs i n hi r sut um cot t on ( Tanej a and Jayaswal , 1 9 8 1 )
Taneja and Jayaswal (1981) carried out a eld trial during the 197980 cotton
growing seasons at Hisar, Haryana (India) to determine the capture threshold of
male pink bollworm moths in pheromone traps used for timing of insecticide
applications. The pheromone traps were omnidirectional with a diameter of
30 cm, a height of 7 cm with eight holes (diameter 2 cm). They were positioned
in each plot and the number of males counted and removed daily. The plot size
was 60 60 m and the experiment was laid out as a simple randomized block
design having six treatments and four replications. The six treatments involved
the application of insecticide to the cotton plots according to four different
pheromone trap catch thresholds, a xed spray schedule and a no spray control.
The four threshold treatments were 4, 8, 12 and 16 moths per trap-night and
Chapter.2 10/7/00 11:07 am Page 33
34 Chapter 2
Tabl e 2 . 2 . Incidence of pink bollworm on open and unopened bolls in plots treated with
insecticides according to four different pheromone trap catch thresholds (T1T4), a xed
schedule treatment (T5) and an untreated control (T6) (after Taneja and Jayaswal, 1981).
Treatment threshold Total Total
Number of moths/ number Percentage number Percentage
trap/night open bolls increase unopen bolls increase
19781979
T1 4 758.5 19.4 164.0 42.9
T2 8 769.7 25.8 168.7 45.9
T3 12 768.0 34.0 153.5 56.0
T4 16 765.0 47.3 175.7 66.9
T5 Fixed
schedule 778.5 48.9 169.5 72.8
T6 Control 724.2 84.9 172.5 91.0
F-test NS S NS S
19791980
T1 4 751.5 25.6 73.5 34.0
T2 8 770.2 32.7 72.5 43.6
T3 12 794.7 48.2 78.2 59.0
T4 16 811.5 47.8 84.0 56.4
T5 Fixed
schedule 812.5 44.2 90.2 49.9
T6 Control 821.5 72.4 92.5 78.6
F-test NS S NS S
spray application was made within 2448 hours of the observed threshold. The
xed spray schedule was the application of insecticide at an interval of 1314
days.
The incidence of pink bollworm during the experiment was recorded, in the
squares, owers, green bolls and opened and unopened bolls. Only the data
from the opened and unopened bolls are discussed here.
Twenty plants were tagged in each plot and all the opened and unopened
bolls from these plants were picked and the incidence of larvae recorded (Table
2.2).
The highest incidence of larvae in open and unopened bolls in each season
occurred in the control plots where no insecticide was applied. In 197879 the
percentage incidence in both opened and unopened bolls increased from treat-
ment 1 to treatment 5, in the 197980 season the differences between treatments
were less pronounced (Table 2.2). The rst treatment recorded a signicantly
lower incidence of larvae in the opened and unopened bolls than other treat-
ments in both years. Hence, the application of insecticides, when the number of
moths averaged four or eight moths/trap/night, proved to be a better strategy
than the xed spray schedule. However, in this particular case, the spray pro-
gramme based on a threshold of four moths/trap/night resulted in an increased
number of insecticide applications. A study of the economics of this programme
still indicated that even with a greater number of sprays than the xed schedule
the threshold programme produced a higher prot.
Chapter.2 10/7/00 11:07 am Page 34
2 . 5 . 2 Temperat ure and physi ol ogi cal t i me
Temperature has a major inuence on
insect development and, hence, can be
used to predict emergence of a particular
life stage. The use of age to dene the
development stage of insects or plants has
been replaced by the idea of physiological
time. Physiological time is a measure of
the amount of heat required over time for
an organism to complete development, or a
stage of development (Campbell et al.,
1974). Physiological time, which is the
cumulative product of total time temper-
ature above a developmental threshold
(Southwood, 1978), is measured in day
degrees and is considered to be a thermal
constant (Andrewartha and Birch, 1954).
Hence, if it is assumed that development is
a linear function of temperature (above a
threshold) then the insect develops in pro-
portion to the accumulated area under the
temperature vs. time graph (Allen, 1976).
Before physiological time can be computed
an estimate of the insects threshold tem-
perature for development needs to be
obtained and the form of the relationship
between temperature and the insects
development rate established.
The simplest estimate of the threshold
for development is the point at which a
regression line crosses the x-axis (where
the development rate = 0) in a develop-
ment rate vs. temperature relationship (Fig.
2.13). The development rates are deter-
mined for each individual as the reciprocal
of the time to development (1/develop-
ment time). They are normally obtained by
measuring the development times for a
number of individuals at constant tempera-
tures in an environmentally controlled
cabinet or growth chamber. Fluctuating
temperatures may inuence the time to
complete insect development (Siddiqui et
al., 1973; Foley, 1981; Sengonca et al.,
1994) although Campbell et al. (1974)
found no difference when constant and
uctuating temperatures were used, pro-
vided that the uctuations were not
extreme, i.e. they did not extend below the
threshold and the average temperature was
not in the upper threshold region. The
insects diet or host may also inuence the
development time, hence the host plants
used in experiments should reect those
used by the insect in the eld (Campbell et
al., 1974; Williams and McDonald, 1982).
The use of the linear regression x-axis
method for calculating a developmental
threshold is sufciently accurate for most
applications; however, techniques for more
Sampling, Monitoring and Forecasting 35
Fi g. 2 . 1 3 . A comparison of linear () and sigmoid ( ) approximations of the relationship between
rate of development (1/time) and temperature for (a) larvae and (b) pupae of Trichoplusia ni (after Stinner et
al., 1974).
Chapter.2 10/7/00 11:07 am Page 35
36 Chapter 2
accurate threshold estimates are possible. If
care is taken to obtain data at very low and
high temperatures the relationship between
development rate and temperature may be
found to be sigmoidal (Fig. 2.13). The sig-
moid relationship shown in Fig. 2.13 simu-
lates the lower temperature relationship
more accurately than the linear relation-
ship (Stinner et al., 1974). The function
used to produce the sigmoid relationship is
as follows:
where:
R
T
= rate of development (1/time) at tem-
perature T
C = maximum development rate e
k1+k2
,
i.e. the asymptote
T
opt
= temperature at which maximum
development rate occurs
k1 = intercept (a constant)
k2 = slope (a constant)
T = T (temperature), for T < T
opt
T= 2 T
opt
T, for T > T
opt
Stinners sigmoid model has been widely
used (e.g. Whalon and Smilowitz, 1979;
Allsopp, 1981).
The daily temperature cycle needed in
any day-degree calculation can be obtained
from a daily temperature trace or it can be
simulated using a sine wave approxima-
tion. Using only daily maximum and mini-
mum temperatures a sine wave can be
generated that closely simulates a daily
temperature cycle. A formula for calculat-
ing half day, day-degrees in situations
where the temperature cycle is intercepted
by a lower threshold temperature for devel-
opment is provided by Allen (1976); a sim-
ilar formula is also provided by Frazer and
Gilbert (1976).
The accuracy with which a day-degree
model predicts a biological event will
depend on the accuracy of the developmen-
tal threshold, the type of temperature mea-
sure used and the precise time that the
day-degree accumulation begins (Collier
and Finch, 1985). Agronomists working
with annual crops commonly use sowing
date as the time to start an accumulation
(Pruess, 1983), i.e. a clearly dened starting
time, with an obvious biological signi-
cance. However, entomologists using day-
degree models nd it more difcult to
dene a single discrete time/event that can
be used to initiate an accumulation. Where
insect growth stages are carefully monitored
and where one growth stage is used to pre-
dict the occurrence of a future stage (e.g. Jay
and Cross, 1998), for example adult catches
in traps used to predict egg hatch, then
models may have a starting time that can be
clearly dened, and are usually quite suc-
cessful (Pruess, 1983; Garguillo et al.,
1984). However, in situations where models
are used to predict insect development after
a period of dormancy or diapause, initiation
times for an accumulation may not be easily
dened. Often arbitrary dates are chosen
(Baker et al., 1982; Collier and Finch, 1985).
The justication for this is usually that day-
degree accumulation before that date is
likely to be negligible. Use of such arbitrary
starting times is likely to become a major
source of error in any day-degree accumula-
tion: an error that cannot be corrected by
mathematically precise day-degree calcula-
tions (Pruess, 1983). Where possible, start-
ing dates for any day-degree calculation
should be based on meaningful biological
criteria.
Day-degrees can be most effectively
used in combination with a monitoring
technique to predict the onset of a particu-
lar life stage of an insect, e.g. egg hatch.
This information can then be used to
ensure timely application of a control
measure. Most commonly it is used with
insecticides (Minks and de Jong, 1975;
Glen and Brain, 1982; Potter and Timmons,
1983; Garguillo et al., 1984; Pitcairn et al.,
1992); however, the principle applies to
other control methods as well e.g. crop
covers used to control Penphigus bursarius
on lettuce (Collier et al., 1994), which is
especially important when insects are only
vulnerable to insecticides for very short
periods of time, for example with boring
insects.
R
C
T
k k T
=
+
( )
=
1
2 10
1 2
e
( . )
Chapter.2 10/7/00 11:07 am Page 36
Sampling, Monitoring and Forecasting 37
Case St udy: Forecast i ng t he t i me of emer gence of sheep bl ow y
( W al l et al . , 1 9 9 2 )
Adult female Lucilia sericata lay batches of up to 200 eggs in the wool of sheep,
close to the skin surface often choosing areas soiled by faeces and urine (Craig,
1955). After hatching, the larvae pass through three instars, feeding on the epider-
mal and skin secretions (Evans, 1936). After completing feeding the third instar
larvae drop to the ground where they disperse (the larval wandering stage) and
eventually burrow into the soil to pupate. The rst generation of adults emerge in
spring; the females seek a suitable oviposition site on a host sheep. In late August
and early September in temperate areas female adults produce larvae that burrow
into the ground and diapause. In mid-March these larvae migrate to the soil sur-
face and pupate and they emerge as rst generation adults in the spring.
Sheep blowy strike is a signicant economic and husbandry problem
throughout the northern hemisphere and in New Zealand, parts of South Africa
and Australia. Control is usually obtained through use of insecticide sheep dips
when the sheep strike levels reach economic thresholds. Information on the
effects of temperature on the rates of development of the different stages of the
blowy life cycle were obtained (Table 2.3) and have been used in a simulation
model to identify the impact of different control measures.
The simulation model shows that mortality of >90% would need to be
achieved on each generation to reduce population growth, which is clearly unre-
alistic. Other simulations indicated that a reduction in the rst generation was
the most crucial to suppressing population growth and that a signicant kill at
this stage in combination with spot treatments as necessary during the rest of the
season could provide sustainable control. However, the use of such strategic
treatments against blowy populations requires prediction of their spring emer-
gence. Spring emergence could be predicted based on information that the over-
wintering larvae require 30 day-degrees to complete larval development and that
pupation required 12.5 day-degrees above 9C following which adults emerge
(Table 2.3). Hence, extrapolation from temperature measurements made from
previous years can be used to give advanced warning of blowy spring emer-
gence and the need or not for sheep dipping.
Tabl e 2 . 3 . Threshold base-temperatures and day-degree requirements ( SE) for completion of
pre-adult life-cycle stages and adult egg batch maturation (data from Wall et al., 1992).
Base temperature (C) Day-degrees (SE)
Larval wandering stage 9.5 45.6 (5.1)
Pupation 8.8 126.1 (3.7)
Post-diapause larvae 9.2 27.7 (0.3)
First egg batch 11.2 62.0 (2.3)
Second egg batch 11.1 29.7 (0.9)
Chapter.2 10/7/00 11:07 am Page 37
38 Chapter 2
Case St udy: Pheromone t rap cat ches of mal e pi nk bol lwor m,
Pect i nophora gossypi el l a, and cot t on bol l i nfest at i on i n Bar bados
( I ngram, 1 9 8 0 )
Pink bollworm, Pectinophora gossypiella, is a major pest in almost all of the cot-
ton growing areas of the world, causing both quantitative and qualitative losses
(Taneja and Jayaswal, 1981). Control of the pink bollworm is normally achieved
by enforcement of a close season (Hill, 1983) when no cotton is grown and
emerging adults can nd no hosts on which to oviposit a suicide emergence
(Ingram, 1980). However, in situations where control is not obtained through the
use of a close season then chemical control may be necessary. Chemical control
against the larvae is usually ineffective because they feed within the fruiting bod-
ies where they are protected. Conventional insecticides are applied mainly to
control the number of adult moths and the larvae not yet bored into the tissue
(Taneja and Jayaswal, 1981).
The cost of chemical control must be more than compensated for by the
increased yield obtained from controlling the pest. Hence, some measure of the
level of infestation that causes damage or yield loss must be determined. With
the pink bollworm there is a direct relationship between cotton boll damage and
the level of infestation. The presence of a larva in a cotton boll may be taken as a
direct indication of boll damage, hence the percentage of bolls infested in a sam-
ple will provide an estimate of overall percentage damage in a eld. The number
of male adults can be easily monitored using a pheromone trap. What is needed
is to establish if there is a relationship between adult numbers (represented by
pheromone trap catches) and the boll damage as measured by the percentage of
infested bolls.
Sampling of adult male populations was carried out using pheromone traps
and related to larval boll infestations in the 197677 and 197778 seasons. A sin-
gle pheromone trap (omnidirectional water trap) was set up in a eld of cotton
11 weeks old and daily catches were recorded until the plants were uprooted at
28 weeks. The trap was positioned just below canopy height and was raised as
the plants grew taller. The pheromone attractant septum was replaced every two
weeks. Samples of 100 large green bolls were selected randomly and opened so
that the percentage mined by pink bollworm could be determined. Boll sampling
was carried out at weekly intervals, from week 13 until week 26. The data from
the 197677 cotton season are shown in Fig. 2.14.
2 . 5 . 3 Predi ct ive model s
A model is a simplied representation of a
system (Holt and Cheke, 1997). Within the
context of forecasting, models are the rela-
tionships that are quantied in some way
that enable prediction of likely incidence
at some future time. The temporal and spa-
tial scales of such forecasts tend to be
dependent on the type of monitoring that
is undertaken. Where monitoring is based
at the farmers eld level, forecasts are usu-
ally short term and restricted to a particu-
lar crop within a restricted area. They usu-
ally employ easy to use monitoring
systems, e.g. pheromone or coloured traps
that provide simple population counts and
a means by which a forecast can be deter-
mined.
The models commonly involve regres-
sion or multiple regression analyses of
insect number of one stage against another
(adults vs. larvae) or against damage.
Chapter.2 10/7/00 11:07 am Page 38
Sampling, Monitoring and Forecasting 39
The mean daily catch of the total number of moths trapped for the week end-
ing on the day on which the boll samples were taken was regressed against the
weekly percentage of damaged bolls (Fig. 2.15). The relationship was shown to
be signicant for both years and an analysis of variance showed there were no
differences between slopes (F = 0.58) or elevation (F = 0.28).
Spraying is usually advised when 10% of the bolls are infested, but this level
should be adjusted each season when the cost of inputs can be weighed against
the expected increase in pickable cotton and the current price obtainable for the
lint (Ingram, 1980). The price of a product and the cost of producing it are going
to vary between seasons. Hence, the level of damage that can be tolerated before
it becomes economically viable to control the pest is also going to uctuate. This
in turn will inuence the threshold value of the catch data used to monitor pop-
ulation change. In this context a relationship similar in form to Fig. 2.15 will be
useful since then new catch thresholds can be easily estimated once a particular
seasonal damage threshold has been identied. However, this does depend on
there being a consistent relationship between the catch and eld data, in both
time and space. The existence of relationships can depend on many of the factors
already discussed in this chapter, as well as the life history strategy and popula-
tion phenology of each particular pest. Each pest must be assessed according to
its particular circumstances, but it would be advisable to study population devel-
opment in a number of elds and over a number of seasons, to validate any rela-
tionship to be used in eld forecasting.
Fi g. 2 . 1 4 . Weekly boll infestations () and nightly pheromone trap catches of the pink bollworm,
Pectinophora gossypiella, during the 197677 cotton season, Barbados (after Ingram, 1980).
Chapter.2 10/7/00 11:07 am Page 39
40 Chapter 2
Fi g. 2 . 1 5 . Relationship between pheromone trap catches of pink bollworm and the percentage
damaged bolls in the 197677 (; ) and 197778 (; ) seasons and for combined
data ( ) (after Ingram, 1980).
Chapter.2 10/7/00 11:07 am Page 40
Regional forecasts tend to be based on
the long term collection of population
data, normally trap catch, at a specic
xed location. Traps that sample aerial
populations such as light traps and suction
traps are most commonly used. The
catches are often collected on a daily basis
and are characteristically collected for a
number of years in order to establish the
presence and form of seasonal population
trends. Often it is hoped that the trap esti-
mates may reect regional population
changes and be used to forecast levels of
eld infestations and provide spray warn-
ing for farmers.
The advantages of such xed position
monitoring systems used for regional fore-
casts are:
1. It can be used in areas where personnel
for eld inspections are limited.
2. Few traps may be required, hence lim-
ited resources can be centralized (perhaps
at agricultural research stations) where
there are the trained personnel necessary
to collect, sort, analyse and interpret the
trap data.
The efcient dissemination of the forecast
information and complementary eld
inspection may also be necessary.
Sampling, Monitoring and Forecasting 41
Fi g. 2 . 1 6 . Regression predicting the expected level of crop infestation by Aphis fabae (log % bean plants
infested). From the spring aerial migration sample (Way et al., 1981).
Chapter.2 10/7/00 11:07 am Page 41
There are a number of disadvantages
with a xed position monitoring system for
use as a regional forecasting programme.
One of the biggest disadvantages is that
data in such a system need to be collected
for at least 10 years in order to validate the
forecasting system (Way et al., 1981), espe-
cially if only one or a few traps are used,
since then replication and validation is
only assessed between years. This means
the use of a xed position monitoring sys-
tem in order to provide a regional forecast-
ing programme is a long-term project,
requiring a large investment of resources
but from which there is no guarantee of a
successful forecasting system. The cost of
the monitoring technique may be reduced
and the probability of obtaining a success-
ful forecasting system is enhanced if the
data for a number of important pests can be
collected and studied at the same time.
The important components of a xed
position monitoring and forecasting system
include:
1. A thorough knowledge of the biology
and seasonal cycle of each pest (Lewis,
1981).
2. An appropriate monitoring technique
for both aerial and eld populations.
3. A consistent relationship between
catch estimates and eld infestation.
4. A relationship between the level of
eld infestation and damage and if possible
between trap estimates and crop damage.
5. Sufcient replication in time and space
for validation of the forecasting pro-
gramme.
A number of such regional forecasting
systems exist (Way et al., 1981 (Fig. 2.16);
Pickup and Brewer, 1994; Linblad and
Solbreck, 1998).
42 Chapter 2
Case St udy: Shor t - t er m forecast i ng of peak popul at i on densi t y of t he
grai n aphi d Si t obi on avenae on wheat ( Ent w i st l e and D i xon, 1 9 8 6 )
The grain aphid, Sitobion avenae, is a major pest of wheat in the UK and Europe.
A number of severe outbreaks have prompted many studies of the biology and
damage relationships of this and other cereal aphids (Vickerman and Wratten,
1979). S. avenae feeds on the ear of the wheat and can cause substantial yield
loss. It is most effectively controlled through the use of insecticides. An ability to
forecast the abundance of this aphid would provide a warning of when insecti-
cide applications may be necessary. Entwistle and Dixon (1986) have produced a
short term forecasting system based on two counts on the crop. The derivation of
this forecasting system is related here. The growth stages (GS) of cereals have
been classied according to a numerical scale (Zadoks et al., 1974). The growth
stages important in the context of this work are:
Growth stage Description
53 One-quarter of ear emerged
59 End of ear emergence
65 Mid-anthesis
69 End of anthesis
A total of 32 sites were sampled from 1975 to 1983 and a further nine sites were
sampled in 1984. Wheat tillers at each of these sites were examined weekly from
mid-May until anthesis (GS 65) after which they were sampled twice weekly
(Leather et al., 1984; Entwistle and Dixon, 1986). A range of between 50 and 100
tillers were examined, depending on the sampling site (Entwistle and Dixon,
1986) and on the aphid density. The number of tillers sampled at some sites was
reduced as aphid densities rose, maintaining a standard error of 10% of the mean
(Leather et al., 1984). The mean number of S. avenae per tiller was calculated on
Chapter.2 10/7/00 11:07 am Page 42
Sampling, Monitoring and Forecasting 43
the day closest to the growth stages GS 53, 59, 65 and 69. The aphid density each
day was estimated with the assumption of a constant rate of increase in popula-
tion size between monitoring dates. The crop growth stage each day was also
estimated assuming equal daily increments on the Zadoks et al. (1974) scale
between monitoring dates.
The log peak density of aphids was regressed against the log density of aphids
at growth stages 59, 65 and 69. The relationship was positive for each growth
stage, although the strongest relationship occurred at growth stage 69 (Fig. 2.17).
The percentage variance explained by the regression line increased from GS 59,
29%; GS 65, 50.4% to GS 69, 70.5%.
The observed rates of increase of aphids per tiller were calculated between
growth stages 53(i)59(ii), 59(i)65(ii) and 65(i)69(ii) using the following formula:
The log peak density of aphids was then regressed against the rate of increase
at GS 5359, GS 5965 and GS 6569. The relationship was positive for each
y =
+
[ ]
+
[ ]
log . log .
( . )
e e
aphids at GS(ii) aphids at GS(i)
number of days between (i) and (ii)
0 01 0 01
2 11
Fi g. 2 . 1 7 . The peak mean number of Sitobion avenae per tiller (y) in relation to the mean number
of S. avenae per tiller (x): at the end of anthesis (GS 69).
log
e
(y) = 1.27 + 0.779 log
e
(x), r + 0.84, d.f. = 30, P < 0.001.
= results from 1976, 1977, 1978, 1979 and 1980 in Norfolk.
= results from 1980 outside Norfolk, 1981, 1983.
Numbers are shown on log scale (after Entwistle and Dixon, 1986).
Chapter.2 10/7/00 11:07 am Page 43
44 Chapter 2
Fig. 2.18. The peak mean number of Sitobion avenae per tiller (y) in relation to the rate of increase
in mean number of S. avenae per tiller per day (x): from GS 65 to the end of anthesis (GS 69).
log
e
(y) = 0.528 + 10.5 (x), r + 0.68, d.f. = 30, P < 0.001.
Symbols as Fig. 2.17, y-axis on log scale (after Entwistle and Dixon, 1986).
growth stage interval, and similarly to above, the strongest relationship occurred
at the later growth stage (Fig. 2.18). The percentage variance explained by the
regression line again increased with increased growth stage from GS 5359, 36%;
GS 5965, 38% to GS 6569, 46%.
A multiple regression, having the following equation was computed:
The incorporation of the rate of increase considerably improved the relation-
ships between peak density and densities at the end of ear emergence (percent-
age variance explained = 45.7%) and during anthesis (percentage variance
explained 66.2%) with the multiple regression for the end of anthesis explaining
86.7% of the variance in the relationship.
The regression equations were used to obtain predicted values for peak popu-
lation densities. Plots of the peak population densities against predicted values
were drawn (Fig. 2.19 shows the relationship for GS 69). The accuracy of the pre-
diction increased with advancing growth stage (Fig. 2.19). The forecast model
now needs to be related to a damage model before this method can be used to
develop a monitoring procedure for practical use.
log .
log .
( . )
e
e
peak no. aphids / tiller
current no. aphids / tiller
observed rate of increase
( )
+
[ ]
= +
( )
+
[ ]
+
( )
0 01
0 01
2 12
1 2
3
K K
K
Chapter.2 10/7/00 11:07 am Page 44
2 . 5 . 4 G eographi c I nfor mat i on Syst ems
The quantication of the spatial dynamics
of pest populations especially in relation
to associated environmental changes, e.g.
wind direction (Tucker et al., 1982) or rain-
fall (Tucker and Pedgeley, 1983; Tucker,
1984a, b) is not new; regional and national
density distribution maps of pest species
constructed from trap catch records using
computer graphics have been possible
since the 1970s (Taylor, 1974; Campion et
al., 1977). However, the more recent
increase in computer power and sophisti-
cation of software has made the analysis of
geographic variables in relation to the spa-
tial aspects of the dynamics of pest popula-
tions more widely available. This type of
analysis based on Geographic Information
Systems (GIS) utilizes data referenced by
spatial or geographic coordinates (Star and
Estes, 1990). Geographical information
such as altitude, temperature, soil type and
distribution of crop varieties can be stored
as a spatial map layer. When a number of
map layers are overlaid, valuable insights
such as pest zones or areas prone to pest
outbreaks may be identied. Information
generated in this way can be fed into mod-
els that use the maps as variables and
analyse these to determine whether corre-
lations exist and to construct forecast
maps. GIS has been successfully used in
pest management to forecast grasshopper
incidence in Canada (Johnson and
Worsbec, 1988), dispersal of rice insects in
South Korea (Song et al., 1994) and to
identify the risk posed by exotic insect
pests in the UK (Baker, 1994; Head et al.,
1998). It is likely that GIS analyses will g-
ure more commonly in the understanding
Sampling, Monitoring and Forecasting 45
Fi g. 2 . 1 9 . The peak mean number of Sitobion avenae per tiller (y) in relation to the forecast from
the multiple regression equation (see text) at the end of anthesis (GS 69). Symbols as Fig. 2.17,
results from 1984 for model validation. Numbers shown on log scale (after Entwistle and Dixon,
1986).
Chapter.2 10/7/00 11:07 am Page 45
of pest populations and the ability to fore-
cast susceptible outbreak regions in the
future, as this powerful technology gains
more widespread use.
2 . 6 D i scussi on
Sampling using relative measures of
insect abundance tends to be popular
among entomologists mainly because the
various types of trap used provide quick
and simple methods for acquiring a large
amount of population data. However, the
value of such data, for the purposes of
monitoring and forecasting, may be lim-
ited if the trap catch cannot be related to
other appropriate population estimates.
The type of monitoring system employed
will be dependent on the user, the pest,
the resources available and whether or
not the monitoring is being carried out
for research purposes or as a practical aid
in insecticide application. More attention
needs to be given at the start of a sam-
pling programme to the eventual use
of the data and whether or not a
monitoring/forecasting programme could
result from the work (Wall, 1990). If this
is the case, then it is important to iden-
tify the potential users, their needs and
abilities so that an appropriate sampling
and monitoring programme can be
devised. The tendency to embark on long
term monitoring programmes with the
hope that something will come out of it
needs to stop and be replaced by a more
rational approach where specic goals,
time limits and available resources are
identied. The type of sampling tech-
niques used in a monitoring programme
dictates the type of forecasting system
that can be developed, hence both the
monitoring programme and the perceived
forecasting system must be appropriate
for the situation and conditions to which
it will be applied.
In the absence of any monitoring/fore-
casting system a farmer would either apply
an insecticide regardless of the level of
pest attack (prophylaxis) or not apply an
insecticide at all. The no control option
would mean that in non-outbreak years (or
seasons) the farmer would maximize his
prots with respect to that particular
pest/crop system; however, in an outbreak
year total yield and monetary loss may
occur. The prophylaxis option in non-out-
break years would reduce the farmers prof-
its by the cost of the unnecessary
insecticide application, whereas in out-
break years the farmer would control the
pest but the prophylaxis strategy may mean
that the farmer uses too many (or too few)
insecticide applications for effective pest
control. An ineffective control due to pro-
phylaxis could reduce the farmers prots.
Hence, neither strategy will always provide
the optimal solution in terms of maximiz-
ing farmers prots. The common factor in
the two strategies that will inuence over-
all farmer prot is the probability of an
outbreak and the severity of attack. A moni-
toring and forecasting system must improve
on both the no control and the prophylaxis
option if it is to be adopted by farmers, i.e. a
monitoring and forecasting system must cor-
rectly predict outbreak and non-outbreak
years so that insecticide is applied only in
outbreak years, and only when it is cost-
effective to do so. Hence, the accuracy and
consistency of the forecast will directly
affect the yield and prots of the farmer. The
value of a forecast scheme and the impor-
tance of its accuracy can be assessed in eco-
nomic terms (Watt, 1983).
The accuracy of a forecast will depend
on the variability encountered in the fore-
cast model. Forecast models are often
based on regression models which are
prone to a number of potentially serious
defects. Firstly, the regression model
should explain a large proportion of the
variance if it is to be at all reliable.
Secondly, regression models are really
only reliable within the range of data
from which they were originally derived.
They may work for many years but then a
combination of circumstances outside the
original conditions arises, causing a
model to fail (Conway, 1984b). These con-
siderations must be taken into account
46 Chapter 2
Chapter.2 10/7/00 11:07 am Page 46
when developing forecast schemes, so
that the reliability that can be placed on
forecasts can be evaluated. A farmer
would soon stop using a monitoring and
forecasting system if it were shown to be
unreliable.
Sampling, Monitoring and Forecasting 47
Chapter.2 10/7/00 11:07 am Page 47
3 . 1 I nt roduct i on
The amount of useful product that is
obtained from crop plants or livestock is
commonly referred to as yield. Estimates
of yield may be: (i) quantitative, e.g. weight
of grain, fruit or tubers per unit of land; or
(ii) qualitative, e.g. the percentage of a
product meeting certain cosmetic stan-
dards which will vary for a given crop or
livestock system according to weather, the
levels and types of input and pest inci-
dence. If all factors are optimal then the
highest attainable yield is obtainable.
However, since conditions are rarely opti-
mal, actual yields are normally well below
those that are theoretically obtainable. The
best a farmer can usually hope to achieve is
a yield that provides the highest possible
return on his investment of inputs.
Yield loss assessments attempt to account
for the difference between actual and attain-
able yield as a result of the inputs, weather
and pests in a given cropping system. Hence,
the losses due to pests constitute only one of
a number of complex production con-
straints. Even so yield losses due to insects
alone provide a multitude of problems for
the scientist to unravel and evaluate.
3 . 2 Approaches and O bj ect ives
Information on yield losses caused by pest
insects is of great interest and value to
decision makers whether these are farmers,
extension agents or government ofcials.
Farmers require yield loss information to
assist in management decisions concerning
selection and timing of control measures
while governments require yield loss data
for food and crop production planning and
to assist in the process of resource alloca-
tion for research, extension and control
operation (Walker, 1987).
There are a number of common
approaches or frameworks that have been
used for assessing economic losses due to
pests (MacLeod and Norton, 1996). These
include:
1. Estimation of expenditure on control or
eradication (e.g. historical annual average
or most recent year).
2. Estimation of the income losses or an
opportunity cost given the threat of pest
damage (e.g. consequences of utilizing one
control option relative to another).
3. Economic threshold models.
4. Assessment of impact of actions on
other parties (e.g. drift from chemical
insecticides on neighbouring farmers and
the wider community).
5. Estimates of the impact in terms of the
economic value of investing public
resources into particular areas (e.g. public
research on Bt insecticides or Bt transgenic
crops).
6. Investment models which involve a rel-
atively large initial investment that provide
3
Yi el d Loss
48
Chapter.3 10/7/00 11:12 am Page 48
Yield Loss 49
a stream of benets over a longer term (e.g.
investment in a plant breeding programme
at a national level which requires a stream
of outlays and benets to the farmer
accrued over a period of time).
The last two methods require the skills and
knowledge of economists to implement
and hence, are generally less applicable.
The other methods, with the exception of
(1) the expenditure method, rely on some
quantitative assessment of a yield/damage
function. The generation of the data neces-
sary to dene the yield/damage function,
especially in economic terms, underpins
the majority of experimental approaches
dealing with yield loss. This is especially
true of the economic threshold concept
(Stern et al., 1959) which has formed the
basis of many pest management systems
and is considered by some a central tenant
of IPM. In addition to experimental
approaches, surveys may be undertaken in
order to understand and quantify farmers
perceptions of yield loss due to pests.
The scale on which yield loss assess-
ments are undertaken represents a further
dimension to take into account. An assess-
ment of crop losses on a regional level may
be required to allow policy decisions to be
made, perhaps concerning priorities for
research (which pests and crops to study),
to assess the need for control and to iden-
tify the regions, farmers and communities
most in need of assistance. Regional evalu-
ation of crop loss can be carried out by use
of either survey or experimental methods
or a combination of both (Rai, 1977;
Nwanze, 1989).
On individual farms, yield loss assess-
ments are normally carried out to establish
criteria on which to base crop and pest
management decisions. Crops are normally
considered in isolation and the effect of a
single major pest on yield is evaluated.
Detailed observation and experimentation
are required in order to assess the impact
of the pest on crop yield under a variety of
conditions, such as the timing of infesta-
tion in relation to crop growth stage, the
weather and the use of different crop pro-
duction practices, e.g. fertilizer and pesti-
cide use. In the latter situation the impact
of pesticide inputs on the yield of a crop
may be used to determine the value of such
a practice to the farmer.
3 . 3 M easurement of Yi el d Loss
The primary aim of a yield loss assessment
is to determine the type of relationship that
may exist between pest infestation and
yield. Initially experiments or surveys may
simply attempt to establish that losses per
se occur but more detailed information is
usually required in order to determine the
way in which pest infestation inuences
yield loss.
3 . 3 . 1 Pest i nt ensi t y
The intensity of pest attack can be
described as the product of three effects:
1. The numbers of the pest present.
2. Their development stage.
3. The duration of the pest attack.
It is the combination of these three factors
in relation to the crop that inuences crop
yield.
Estimates of insect numbers or density
are usually made through actual counts of
the insect on the crop, or by measuring the
proportion of those plants or plant parts
that are infested. Occasionally, relative
sampling methods may also be employed.
Another sampling procedure that is used in
yield loss assessment studies is that of a
scale of damage or infestation and the clas-
sication of eld samples by a visual rat-
ing. This is a technique commonly used in
breeding trials that assess the effect of
plant resistance on insect/pest numbers
(Chapter 5).
When a count of insects is made and
used as a measure of pest intensity, it is
assumed that each individual insect con-
tributes an equal amount to the total yield
loss of the plant or crop. However, different
insect developmental stages may have a
differential effect on plant yield. Hence, in
order to assess accurately the effect of
insect intensity on yield loss some account
Chapter.3 10/7/00 11:12 am Page 49
should be taken of the population structure
of the infesting pest population. The popu-
lation structure of the pest can be deter-
mined through the use of a more rened
count procedure, so that the individual
insects are classied according to develop-
mental stage or by the use of an index that
reects the developmental stage. The yield
loss caused by each developmental stage or
index level can be related to that caused by
the most damaging developmental stage of
the insect.
Developmental stages having a similar
effect can be clumped together; for example,
in the assessment of yield loss caused by
aphids on cereals, adults and fourth instar
nymphs were given an index of one and
nymphs younger than this one-third, so that
three nymphs were required to equal one
adult (Wratten et al., 1979). Aphid counts
are thus adjusted to adult equivalents
which are then used as the measure of pest
intensity. Alternatively the damage or area
consumed by the immature stages required
to complete their development can be deter-
mined, e.g. the larvae of the green clover
worm (Plathypena scabra) consume on
average 54 cm
2
of soybean leaves in order to
complete development (Hammond et al.,
1979; Browde et al., 1994a). The length of
time for which a pest infestation is present
on a plant or crop will also inuence the
extent of yield loss. Hence, any index of the
size of an infestation needs a temporal com-
ponent that can take this into account. The
level of attack can then be expressed as
insect days, which is the area beneath a
graph of insect numbers (or adult equiva-
lents) plotted against time (e.g. Smelser and
Pedigo, 1992; Annan et al., 1996).
3 . 3 . 2 Types of pest damage
The presence of an insect pest in a crop is
usually characterized by a particular type
of damage. The damage may take the form
of injuries caused by insect feeding, the
presence of contaminants, such as frass,
that reduce the market quality of the har-
vestable product or indirect insect damage
caused by the presence of bacteria or
viruses transmitted by the insect. The type
of pest damage will in turn inuence both
the likelihood and the extent of yield loss.
Insects feed and consume plant tissue or
plant sap by chewing, sucking or boring.
Chewing insects that consume leaf tissue
will reduce the area of photosynthetic
material available to the plant. Although
the damage caused may be obvious, the
loss of leaf area does not necessarily result
in a concomitant loss in plant yield simply
because plants can often compensate for
damaged tissue by enhanced growth
(Section 3.9.1).
However, where chewing insects feed
directly on owering or fruiting structures
then substantial yield loss can occur. For
instance, a single adult bean leaf beetle
(Ceratoma trifurcata) will feed on average
on 0.494 soybean pods per day in a nor-
mal outbreak year (Smelser and Pedigo,
1992).
Insects that bore into plant tissue
include leaf miners, shooties, stem borers
and those insects that bore into fruits and
grains. The last group may cause direct
yield loss due to consumption of crop
grains, while others may reduce the value
of the product by causing a decrease in
quality. Stem borers can be particularly
destructive because their larvae bore into
the developing stems, often killing them
and causing a yield loss by reducing the
number of grain bearing shoots or by weak-
ening stems to the extent that they lodge
and cannot be harvested.
Insects that imbibe plant sap use their
mouth parts to pierce and probe within the
plant tissue until they locate a phloem ves-
sel from which they take up the sap. The
presence of sucking insects acts as a sink
for the phloem, redirecting a large part of it
away from the tissue for which it was
intended and into the insect gut. In this
way an infestation of phloem feeding
insects may interfere with the normal parti-
tion of photosynthates between plant
organs (Bardner and Fletcher, 1974).
The extent of the yield loss will often
depend on the feeding sites of the sucking
insects. For example, there are marked dif-
ferences in the feeding sites of cereal aphid
50 Chapter 3
Chapter.3 10/7/00 11:12 am Page 50
Yield Loss 51
species in the UK and these are important
in relation to the amount of damage which
they cause (Vickerman and Wratten, 1979).
The aphid Metopolophium dirhodum is
mainly a leaf feeder on wheat, where it
intercepts the nitrogen and carbohydrates
in the ag leaf that are allocated to the
developing ear. M. dirhodum has been
shown to reduce overall grain weight by as
much as 7%. The grain aphid, Sitobion
avenae, however, feeds at the glume bases
and hence directly reduces the supply of
assimilates in the developing grain reduc-
ing the yield by 14% (Wratten, 1975). The
differing effects of the two aphid species
resulted from the degree of nutrient drain
imposed at the particular feeding sites,
combined with a reduction in the leaf area
duration of the ag leaf.
The contamination of the harvested
product with frass, exuviae or the insect
itself, while not directly affecting yield,
can be considered as damaging to the crop
since it can reduce the market value of the
product. This is a factor that greatly affects
the market value of food products in devel-
oped countries where extensive grading
systems for food quality exist. For instance,
in California in the USA, processing toma-
toes are rejected if 2% or more of the toma-
toes by weight have a larva or excreta of
insects in the esh of the tomato. Open
holes that are clean and contain no larvae
are not subject to the 2% tolerance.
However, if a hole penetrates into the
tomato so that the seed pocket is visible,
the tomato is scored as limited use and
may be subject to a quality deduction by
the processor. Between 1988 and 1990 an
average 62% of loads were scored as hav-
ing a trace or more of damage but rarely
were loads graded as exceeding the 2% tol-
erance (0.5%) (Zalom and Jones, 1994).
Insect vectors rarely cause direct losses
to a crop, rather it is the diseases they
transmit that cause the major problem.
However, often the most appropriate means
of managing the disease is to control the
insect vector. Virus yellows disease of
sugar beet is one of the most important dis-
eases to affect the crop in Europe causing
reduction in sugar yields by up to 50% in
some years (Smith and Hallsworth 1990;
Dewar, 1992b). Virus yellows diseases are
caused by two viruses, the beet mild yel-
lowing luteovirus (BMYV) and the beet yel-
lows closterovirus (BYV). Their control
relies on insecticides either applied at
drilling or as a foliar application to prevent
build up of their aphid vectors, the peach-
potato aphid Myzus persicae and the
potato aphid Macrosiphum euphorbiae
(Stevens et al., 1994).
Case St udy: The effect s of feedi ng by l arvae of Pl ut el l a xyl ost el l a
and Phaedon cochl ear i ae on t he yi el d of t ur ni p and radi sh pl ant s
( Tayl or and Bardner, 1 9 6 8 )
A laboratory experiment was carried out to assess the effects of larval density
on the defoliation of radish and turnip leaves and the consequent effect of this
on root yield. Seedlings of radish and turnip were infested with ve, ten, 15 or
20 larvae. There were four replicates of each density and four controls for both
turnip and radish. The insects fed until they pupated and then the plants were
harvested, their remaining leaf area measured and the dry weight of roots deter-
mined. Table 3.1 shows that with increasing larval density the leaf area remain-
ing decreased. The decrease in leaf area had a signicant and detrimental effect
on root yield with the two insect species decreasing yield of radish similarly.
However, in turnip the relationship between the larval density of P. xylostella
and leaf area is less straightforward than with radish. The leaf area of the
infested plants decreases compared with uninfested plants, but the changing
larval density has no apparent effect on leaf area or ultimately on root yield.
Chapter.3 10/7/00 11:12 am Page 51
52 Chapter 3
3 . 3 . 3 M easures of yi el d and yi el d l oss
Crop yield is usually measured in terms
of kilograms of harvested product per
hectare. As a standard measure this allows
easy comparison between elds and trials.
However, on an individual plant level,
yield will be inuenced by the number of
plant parts bearing the harvestable product
(grains, fruits and tubers), the actual
weight or size of these products and the
number per plant part. For instance, in
cereals yield loss due to aphids may result
from a reduction in the number of ear-
heads, the grain weight (usually measured
as 1000-grain weight) or the number of
grains per ear head (Vickerman and
Wratten, 1979). These different yield com-
ponents are not always stated, but they are
useful for indicating the ways in which
yield may be improved. It is of little value
to quote yield reduction as a percentage
loss unless this gure is supported by an
absolute measure of the yield or yield loss.
In the same way, a value for yield based on
kilograms per unit length of row has little
meaning unless the number of plants or
the plant spacing is also given. Care must
be exercised to ensure that yield loss data
are quoted in a form that makes them
meaningful to others.
The losses caused by insects in posthar-
vest storage, such as Sitophilus spp. and
Prostephanus truncatus, are usually mea-
sured by reference to grain weight. The loss
may be measured as a change in the weight
of samples over a particular period, by
This can be explained by the compensatory growth of the turnip after insect
attack. The differing response of turnip to attack by the two insects can be
explained by the way in which the two insects differ in both their method of
feeding and where they feed on the plant. P. xylostella larvae feed indiscrimi-
nately on all leaves, but only damage the area actually eaten, leaving the veins
intact; yield was not affected because attacked plants retained their older leaves
longer than unattacked plants. These older leaves grew large after P. xylostella
had stopped feeding; the plants also grew side shoots and produced more leaves
than unattacked plants. In contrast, P. cochleariae fed mainly on older leaves and
caused greater damage because the larvae sever leaf veins and rasp the leaf sur-
face thereby killing more tissue by desiccation than they actually consumed.
Tabl e 3 . 1 . The average leaf area defoliated by the larvae of Plutella xylostella and Phaedon
cochleariae and its effect on root yield of radish and turnip plants (from Taylor and Bardner,
1968).
Plutella xylostella Phaedon cochleariae
Leaf area Root dry Leaf area Root dry
Larvae per plant (cm
2
) weight (g) (cm
2
) weight (g)
Turnip plants
0 500 1.85 355 2.13
5 414 1.99 282 2.26
10 426 1.91 205 1.68
15 429 1.71 217 1.55
20 409 2.83 163 1.19
Radish plants
0 283 2.96 287 3.83
5 191 1.85 217 2.09
10 125 0.73 155 1.45
15 100 0.80 94 0.74
20 56 0.39 93 0.98
Chapter.3 10/7/00 11:12 am Page 52
Yield Loss 53
comparative weights of damaged and
undamaged kernels or by the determination
of the percentage of insect damaged grain
which is then converted into a measure of
weight loss. In fruit tree crops losses may
be measured by fruit damage, decreased
yield or mortality. The losses incurred due
to tree mortality may be assessed in terms
of the costs of replanting and the delay in
production, for example in young apple
and pear trees attacked by the leopard
moth, Zeuzera pyrina (Audemard, 1971).
Losses in forest trees caused by defoliating
pests such as sawies (e.g. Neodiprion
sertifer), the jack pine budworm,
Choristoneura pinus, and the spruce bud-
worm, C. fumiferana, may be measured by
incremental loss in terms of shoot elonga-
tion, radial increment, area of annual rings,
tree height, top and root mortality and
ultimately by the lost volume of wood
(Kulman, 1971; Day and Leather, 1997).
There are some circumstances where the
effect of a pest on the quality of a product
can be considered as a yield loss. In horti-
cultural crops where grading and sorting
are carried out, pest damage may render a
certain percentage of the crop unt for sale,
in which case the percentage of discarded
crop will provide a measure of yield loss
(Southwood and Norton, 1973). Where a
lower price will be obtained for a poorer
quality product the loss can be expressed
as the proportion of the crop falling within
each grade/category.
Insect pests can also have a direct
effect on the quality of the harvested
product. Infestations of the aphid Sitobion
avenae have been shown to affect signi-
cantly the bread making quality of wheat
by reducing the percentage our extrac-
tion, increasing the colour, nicotinic acid
and thiamine (vitamin B
12
) content and
reducing the baking value of the our (Lee
et al., 1981). However, different aspects of
the grain quality do not change in parallel
with one another, or with yield changes
and thus damage thresholds have to vary
according to the yield/quality measure
under consideration.
3 . 4 Crop Loss Surveys
Crop loss surveys may be undertaken sim-
ply to determine the types of losses occur-
ring and their main causes, to determine
the distribution of losses in different areas
or to actually evaluate losses with a view to
forecasting crop production or justifying
control measures (Walker, 1987). In addi-
tion, surveys may be undertaken to meet
more specic objectives such as dening
farmers perception of yield losses (Mulaa,
1995) or to establish baseline data by
which to evaluate area-wide control mea-
sures (e.g. classical biocontrol introduc-
tions; Farrell et al., 1996). Such surveys
may be conducted as face-to-face inter-
views with individual or groups of farmers
(e.g. Mulaa, 1995) or by use of postal ques-
tionnaires (e.g. French et al., 1992, 1995).
The question/interview approach can be
supplemented by on-site evaluation of
actual yield losses. In the study conducted
by Mulaa (1995) the interviews were con-
ducted and then the numbers of maize
plants damaged by the stalkborer Busseola
fusca were counted on each farm from ve
areas (10 m 10 m) selected at random.
The percentage of damaged plants per
hectare was then determined using a sim-
ple formula, taking into account plant
spacing, which allowed comparison of the
distribution and extent of plants damaged
by stalkborers in the Trans Nzoia District,
Kenya. Surveys provide useful information
on yield loss that it is often impossible to
collect by any other means. However, to
carry out surveys correctly requires a great
deal of resources. In the B. fusca example
above, 300 farmers were interviewed in
ve different agro-ecological zones (Mulaa,
1995).
Chapter.3 10/7/00 11:12 am Page 53
54 Chapter 3
Case St udy: Preval ence and regi onal di st r i but i on of sheep bl ow y
st r i ke i n Engl and and W al es ( French et al . , 1 9 9 2 )
Sheep blowy strike (ovine myiasis) is the infestation of the skin of sheep by the
larvae of blowies. The problem occurs in many sheep producing countries of
the world but in the United Kingdom the common myiasis y is Lucilia sericata.
A self-administered, two page questionnaire was used to collect data on the
prevalence and distribution of blowy strike in England and Wales in 1988 and
1989. These were important years for the control of blowy strike in the UK
because the number of compulsory dips (total immersion in insecticide) for the
control of sheep scab was reduced from two to one in 1989. The questionnaire
was sent to a random sample of 2451 sheep farmers with a minimum ock size of
50 sheep. The sample was stratied by region and contained 4.6% of the hold-
ings in England and Wales with more than 50 sheep. Of the 2451 sheep farmers,
1819 returned the questionnaires giving an overall response rate of 74.2%. Of
these 1638 were usable (66.8%).
The analysis of the questionnaire indicated that a large proportion of farms
in England and Wales reported one or more cases of strike in their ocks. The
proportion in both years was similar (77.5% in 1988; 80.0% in 1989) even
between regions (Fig. 3.1). However, there were signicant differences between
regions. In the north of England the proportion was signicantly lower (58.6%
in 1988 and 1989) than in the four other regions. The proportion of affected
farms was similar in central England and Wales (76.279% in 1988; 80.282.5%
Fi g. 3 . 1 . Proportions of farmers reporting at least one case of strike in 1988 and 1989, in each
region and overall (showing 95% condence intervals; after French et al., 1992).
Chapter.3 10/7/00 11:12 am Page 54
3 . 5 Pl ant G row t h Analysi s and
M odel l i ng
The process of infestation and its effects on
plant yield involves a complex of interac-
tions between the insect and the plant, a
process that cannot be fully understood
until some attention is paid to the effects of
the insect or plant growth (Bardner and
Fletcher, 1974). Insect infestation is just
one of the factors that can affect a plants
growth during its normal life cycle, the
main inuencing factor being the environ-
ment. One of the methods used by plant
physiologists to study the effect of the
environment on plant growth is called
plant growth analysis. This is a powerful
method of estimating net photosynthetic
production and analysing the physiological
adaptations of different plant species
(Jones, 1983); it can be readily applied to
estimating the effect of insect infestation
on plant growth.
Plant growth analysis is based on read-
ily available measurements of plant dry
weights and leaf dimensions, obtained
from regular harvests at different times
during a plants life cycle. The analyses can
be directed at changes in the growth of
individual plants, plant parts or plant
stands. Plant growth can be followed
through a series of relatively infrequent
large harvests (the classical approach to
plant growth analysis) or by smaller more
frequent harvests (the functional approach;
Hunt, 1982). Both these approaches pro-
duce a series of sequential measurements
from which up to four principal types of
derived quantity can be constructed.
1. Simple rate of change.
2. Simple ratios between two quantities.
3. Compounded rates of change (rates
involving more than one variable).
4. Integral durations (the area beneath a
time series of primary or derived quanti-
ties; Hunt, 1982).
Also a number of important relationships
exist between these derived quantities.
Most photosynthesis occurs in plant
leaves, hence the leaf area will inuence
the amount of photosynthesis that can take
place. The leaf area ratio (LAR) is used as
an index of plant leaness. The LAR is the
ratio of the total leaf area to whole plant
dry weight and in a broad sense represents
the ratio of photosynthesizing to respiring
material within the plant (Hunt, 1978).
where:
LAR is the leaf area ratio
LA is the leaf area of the plant
Wis the dry weight of the plant.
Plants simultaneously depend upon
their leaness and on the efciency of their
leaves to produce new material for growth.
An index of leaf production efciency is
supplied by the unit leaf rate (E) which is
the net gain in weight of the plant per unit
leaf area (Hunt, 1978):
LAR =
LA
W
( . ) 3 1
Yield Loss 55
in 1989) and signicantly different from the other three regions (
2
analysis at
P < 0.05). Similarly the south west and south east regions were similar (87.9%
and 86.9% in 1988; 89.5% and 89.9% in 1989) but signicantly different from
the other three regions (P < 0.05; Fig. 3.1).
Until recently the control of blowy strike has been helped by statutory
requirements to dip sheep in the summer. With this removed there was concern
that the prevalence of sheep strike would increase. Although this study did
reveal a consistent small increase in strike in 1989 there are many factors that
could have contributed to this and the importance of the increase of 0.1% is
questionable. Despite this, by providing estimates of the frequency of blowy
strike, the survey provides useful information for the future assessment of strike
and its control.
Chapter.3 10/7/00 11:12 am Page 55
where:
Wis the dry weight of the plant
LA is the leaf area at times T
2
and T
1
.
The estimates of plant leaness (LAR) and
of the assimilatory capacity of its leaves (E)
enable a calculation of overall relative
growth rate (RGR) to be made. The RGR is
simultaneously dependent on both LAR
and E, and can be simply expressed as:
RGR = LAR E (3.3)
The RGR at the whole plant level is
expressed in the classical approach to
plant growth analysis as the mean RGR:
and in the functional approach as an
instantaneous:
The RGR of the whole plant may be useful
when there is a need to compare species
and treatment differences on a uniform
basis; further useful information may be
obtained by determining relative growth
rates of various plant structures such as
leaves, shoots or roots. For instance,
Nicholson (1992) revealed through growth
analysis that potato plants defoliated by
the Colorado beetle had higher relative
growth rates for leaf expansion than non-
defoliated plants.
Crop growth, like individual plant
growth, is inuenced by both leaf produc-
tion efciency and by the leaness of the
crop. The leaf production efciency
expressed as the unit leaf rate (ULR) pro-
vides exactly the same information at the
crop level as at the individual plant level.
However, the leaf area per plant is an inap-
propriate measure of leaness of the whole
crop since it does not take into account
variation due to plant density. Since the
number of plants per unit area of land will
inuence the leaf area present per unit area
of land, a measure is required that will take
plant spacing into account. Hence the use
of the leaf area index (L), expressed as:
where:
P is the land area
La is the total leaf area above the land area P.
The value L is dimensionless and repre-
sents the mean crop leaness. Leaf area
indices have been shown to be inuenced
by infestations of Empoasca fabae on
lucerne (Hutchins and Pedigo, 1989),
Sogatella furcifera on rice (Watanabe et al.,
1994) and Sitobion avenae on wheat
(Rossing and Wiel, 1990). The changing
value of the leaf area index during crop
development can be plotted on a time
series, and the area under the time curve
calculated. This integral, referred to as the
leaf area duration (LAD), is a measure of
the total crop leaness during its growth
period and represents the crops whole
opportunity for assimilation (Hunt, 1978).
Annan et al. (1996) used the LAD as one
measure by which they compared the
impact of Aphis craccivora on the growth
and yield of susceptible and resistant culti-
vars. Analysis revealed that the susceptible
cultivar ICV-1 had a greatly reduced LAD
value for given levels of infestation com-
pared with the resistant cultivar ICV-12.
Infested ICV-1 seedlings also showed stunt-
ing and other growth deformities which
were not observed in ICV-12 plants.
As plants grow, photosynthetic materi-
als are distributed to particular organs
according to the developmental stage of the
plant. During the initial stages of growth
plants produce large leaf areas and hence
materials are directed towards leaf devel-
opment. However, when it is necessary to
produce other structures such as owers or
fruits assimilates are switched away from
other organs to accommodate the growth of
these new structures. Since there is a limit
to the amount of new assimilates that can
L
P
=
La
( . ) 3 6
R
W
t
=
d(
d
e
log )
( . ) 3 5
Mean RGR = =
e e
R
W W
T T
log log
( . )
2 1
2 1
3 4
E
W W
T T
LA LA
LA LA
=
2 1
2 1
2 1
2 1
3 2
log log
( . )
e e
56 Chapter 3
Chapter.3 10/7/00 11:12 am Page 56
be produced, an increase in the require-
ments for materials in one organ would
imply a concomitant decrease in the
amount distributed elsewhere. The
sequence in which this partitioning occurs
and the impact that insect infestation can
have on this process is of great interest,
particularly in dening the relationship
between crop yield and the timing and
intensity of insect attack.
If the dry weight of plant parts is mea-
sured at regular intervals during crop
development then the distribution of these
weights can be plotted to provide an indi-
cation of how assimilates are partitioned
(Fig. 3.2). Alternatively, the distribution of
weights as a percentage of total dry weight
can be plotted which will give an indica-
tion of the magnitude of any switch in the
partitioning of assimilates. The changes in
weight gain by individual structures can be
determined by calculating the dry weight
increment between one sample and the
next. Pests can have an impact on the dry
matter partitioning in plants, which is par-
ticularly important where it affects the
allocation of assimilates to the harvested
product. Mites (Tetranychus urticae)
markedly affect both the shoot nitrogen
accumulation and partitioning in cotton
(Sadras and Wilson, 1997c). Lint yield
losses were signicant and were greatest
for early mite infestation. Reduced shoot
dry matter and reduced harvest index (lint
yield/shoot dry weight) both contributed to
this yield reduction (Sadras and Wilson,
1997b). Reductions in both fruit number
per unit shoot dry matter and seed cotton
mass per fruit also contribute to a reduc-
tion in the harvest index of damaged crops.
Yield Loss 57
Fi g. 3 . 2 . The relative distributions of mean dry weight at harvest of the various types of plant organ, in
relation to age for plants of Helianthus annuus (after Evans, 1972).
Chapter.3 10/7/00 11:12 am Page 57
The analyses of partitioning of assimilates
in relation to pest attack can provide a
greater understanding of the process of yield
loss. However, it remains an area that has
not yet been adequately addressed by ento-
mologists.
3 . 5 . 1 Crop grow t h model s
Crop growth can be modelled at different
levels of physiological detail (Spitters,
1990). At the simplest level crop growth
and yield are modelled as direct responses
to weather, climate and the environment
(Pace and MacKenzie, 1987). Regression
models are normally used to predict yield
against one or a number of variables such as
rainfall or temperature. As with all such
empirical approaches the models are of lit-
tle use outside the environmental ranges for
which they were developed (France and
Thornley, 1984). In general, empirical
growth models have little direct application
to pest loss estimation although they are
often components of mechanistic models,
which attempt to explain the effects of the
environment on lower level plant physio-
logical processes. Among those most often
considered are light interception and pho-
tosynthesis, root activity and nutrient
uptake, leaf area expansion, transpiration,
carbon and nutrient partitioning, growth,
development and senescence of organs
(Pace and MacKenzie, 1987). This model-
ling approach can be used to simulate pest
damage and crop interactions. Various crop
models have been developed: GLYCIM a
plant growth model for soybean (Acock et
al., 1983); SUBSTOR predicts yield in pota-
toes (Travasso et al., 1986); OILCROP-SUN
a process orientated model for sunower
crops (Villaloboss et al., 1996); a number
also simulate pest damage effects, for
instance CERES a rice crop growth model
(Pinnschmidt et al., 1995) and GOSSYM a
cotton pest model (Baker et al., 1983).
Above, the use of leaf area index (L) and
leaf area duration (LAD) were introduced in
relation to plant dry matter production. The
leaf area index is a measure of the leaness
of a crop and leaf area duration is an inte-
gral of its changes over a season. Any insect
infestation that defoliates a crop will reduce
the amount of leaf area which will in turn
inuence the L and the LAD and hence sub-
sequently reduce crop yield. The photosyn-
thetic capability of a plant is not just
dependent on its leaness, but also on the
ability of the leaves to absorb light. The
range of light wavelengths important for
photosynthesis is broadly similar to the visi-
ble spectrum and is referred to as the photo-
synthetically active radiation (PAR) (Jones,
1983). The amount of PAR absorbed by the
leaves and the efciency of its use, com-
bined with the area of leaves available for
absorption will thus inuence the plants
dry matter production. A graph of total bio-
mass against intercepted light will give a
straight line through the origin which repre-
sents the average crop light use efciency
(CLUE). Pests may reduce the amount of
light intercepted, CLUE or both (Rossing
and Heong, 1997). When CLUE is unaf-
fected, injury simply causes a reduction in
the amount of energy available for crop
growth (Waggoner and Berger, 1987; see
Case Study). Damage is then proportional to
the amount of energy that was not inter-
cepted. When CLUE is decreased, the rela-
tion between intercepted light and damage
is more complex and would justify a move
away from empirical studies to use of more
comprehensive crop growth models. A
number of studies have utilized CLUE (syn-
onymous with radiation use efciency RUS;
g dry matter MJ
1
or PAR intercepted by the
canopy) to evaluate effects of pest damage
(Sadras, 1996; Sadras and Wilson, 1997a).
58 Chapter 3
Chapter.3 10/7/00 11:12 am Page 58
Yield Loss 59
Case St udy: I mpact of Phyt opht hora i nfest ans on pot at o yi el d
( W aggoner and Ber ger, 1 9 8 7 )
An insect that defoliates a crop or mines leaves will reduce the leaf area avail-
able for light absorption. Waggoner and Berger (1987) when considering the
effects of plant diseases (the ideas are equally applicable to insect defoliators)
proposed that it would be logical to subtract the area of diseased leaves from the
LAD by integrating the size of the healthy leaves [(1 x)L] (where x is the frac-
tion of disease incidence) over the season. This provides a measure of HAD, the
healthy leaf area duration.
Waggoner and Berger (1987) used the data of Rotem et al. (1983a, b) on yield
losses caused by Phytophthora infestans to potato to determine if HAD would
provide a good predictor of the yield of a diseased crop. The HAD was calculated
as the sum of the healthy haulm area multiplied by the interval of time that con-
stituted a season, for three separate periods, the springs of 1978 and 1979 and the
autumn of 1978. The relationship of HAD with yield is shown in Fig. 3.3. The
data for spring in the two years differ because the growth occurred over an
extended period in 1978. The amount of insolation also changed markedly
Fi g. 3 . 3 . The relationship between the healthy leaf area duration (HAD) and the tuber yield of
potatoes during three seasons: spring 1978 (), autumn 1978 () and spring 1979 () (after
Waggoner and Berger, 1987).
Chapter.3 10/7/00 11:12 am Page 59
3 . 5 . 2 M odel l i ng pl ant physi ol ogi cal
processes
A more complex approach to the modelling
of crop growth, but one that can incorpo-
rate the effects of damage caused by a vari-
ety of pest types, is the models that
simulate growth on the basis of plant phys-
iological processes in relation to the physi-
cal environment (Hughes, 1988). These
models can include mechanistic models of
pest and disease impact on yield.
Pests can affect plants in a number of
ways depending on their feeding and life
habits. They may reduce plant inputs such
as light, or water, they may affect meta-
bolic and growth processes directly or
consume/remove previously produced
assimilate or crop structural material
(Boote et al., 1983). Pests can thus be clas-
sied according to the type of damage they
cause as:
1. Stand reducers (stem borers, shoot-
ies).
2. Photosynthetic rate reducers (mites and
thrips).
3. Leaf senescence accelerators (plant-
hoppers).
4. Light stealers (mites, leaf miners, sooty
moulds growing on aphid honeydew).
5. Assimilate sappers (aphids, bugs).
6. Tissue users (lepidopterous larvae, bee-
tles).
7. Turgor reducers (root feeding insects).
The type and amount of information
required to simulate damage for each cate-
gory of pest is different. A conceptual
model of crop carbon xation, leaf growth
and leaf abscission processes is given in
Fig. 3.4. For stand reducers the number of
plants lost, the timing and distribution of
plant losses within a eld and the capacity
of the crop to compensate for missing
plants in a stand is required. To quantify
the effects of assimilate sappers the rate of
carbon removal must be determined as a
function of pest density and activity. The
minimum information required to simulate
the effects of tissue consumers is the
amount of leaf mass consumed per unit of
land area and the approximate timing of
leaf area removal (Boote et al., 1983).
A light-interception photosynthesis sub-
model would be needed to handle the dam-
age from the insect pests as well as a
soil-root plant water balance model espe-
cially in situations where drought is a pos-
sibility and root pests are involved. These
detailed models are quite complex and
although Boote et al. (1983) have shown
the usefulness of such models for simulat-
ing nematode reduction of soybean yield
and leaf spot damage on peanut photosyn-
60 Chapter 3
between spring and autumn from 22.6 MJ m
2
day
1
on 21 March to 29.5 on 22
June and from 22.3 on 25 September to 11.6 on 22 December.
The yield/HAD relationship indicates the value of the approach since the
HAD accurately predicts the crop yield (Fig. 3.3).
Fi g. 3 . 4 . A conceptual model of crop carbon
xation, leaf growth and leaf abscission processes
as affected by various pest categories (after Boote et
al., 1983).
Chapter.3 10/7/00 11:12 am Page 60
thesis and yield, in practice these models
are often too demanding of input data to be
useful (Hughes, 1988).
An alternative approach is the demo-
graphic metabolic pool approach which
has been widely used to simulate popula-
tion interactions in agroecosystems (Graf et
al., 1992). The general features of the meta-
bolic pool approach have been reviewed by
Graf et al. (1990). Population interactions
are considered as resource ows and quan-
tied in terms of a functional response
model which describes acquisition of
resources as a function of their demand,
availability and accessibility (Gutierrez et
al., 1984, 1987; Graf et al., 1990). Gutierrez
et al. (1988a,b,c) expanded the demo-
graphic metabolic pool approach to investi-
gate multi-trophic interactions in cassava
ecosystems. Essentially, the simulation
models have a common mathematical form
across trophic levels, which means the
basic model is applicable to plants, animal
herbivores, predators and parasitoids alike.
The plant model uses population theory as
a framework, so that plant physiology is
incorporated into a population dynamics
model. The multitrophic model has been
used to simulate the dynamics of cassava
growth and development (Fig. 3.5) by tak-
ing into account changes in rates of birth,
death, net immigration and mass growth in
cohorts of differing ages and a population.
It is interesting that analogies can be made
between plant and animal systems, so that
nitrogen and water uptake by plants is con-
sidered as a predation process, and the pro-
duction of new biomass by photosynthesis
and its general allocation are analogous to
the capture and assimilation of prey by ani-
mals, e.g. leaves seek light, herbivores seek
plants, etc. Hence, in this general way,
processes can be simulated so that the
models are applicable across trophic levels.
Gutierrez et al. (1988a,b,c) used their
model partly to assess the inuence of the
cassava mealybug, Phenacoccus manihoti,
and the cassava green mite, Mononychellus
tanajoa, on cassava yield. The model simu-
lates both the phenology and magnitude of
cassava growth and the development and
mealybug population dynamics for two
growing seasons. Rainfall was shown to
suppress mealybug populations directly
and enhanced the ability of the plant to
compensate for feeding damage. In dry
years, however, when water stress affected
photosynthesis, losses were higher and
Yield Loss 61
Fi g. 3 . 5 . Components of the cassava systems model (after Gutierrez et al., 1988a).
Chapter.3 10/7/00 11:12 am Page 61
62 Chapter 3
were compounded by higher mealybug
populations. A similar situation occurred
with the green mite, where the damaging
effects of drought on yield were com-
pounded by mite feeding (Gutierrez et al.,
1988a,b,c). The model was also used to
simulate the population dynamics of a
predator and parasitoid of the mealybug,
indicating the advantages of such multi-
trophic models. However, as with the
model of Waggoner and Berger (1987), the
need for extensive eld data makes the
approach difcult to utilize in practice. But
if yield loss assessment is to develop
beyond the use of simple yield/infestation
regression then the resources for more
studies of the type outlined above may
well be necessary.
3 . 6 M ani pul at ive Techni ques
The key to yield loss assessments is the
ability to determine the level of pest attack
coincident with observed yield loss. Often
the variation in levels of pest incidence
from eld to eld and season to season
makes it impossible or extremely difcult
to plan and carry out meaningful yield loss
studies. In order to achieve controlled lev-
els of damage/insect attack in such experi-
ments, entomologists have articially
infested plants with insects, simulated
insect damage to plants as well as employ-
ing a variety of techniques to manipulate
natural levels of infestation in order to
more fully evaluate the impact of pests on
yield.
3 . 6 . 1 Ar t i ci al i nfest at i on
Articial infestation involves augmenting
natural levels of pest intensity with insects
either collected from the wild or with
insects that have been reared in the labora-
tory (Josephson et al., 1966; Kouskolekas
and Decker, 1968). The use of insects col-
lected from the eld has the disadvantage
that the insects may not be available in suf-
cient quantities when they are needed for
the experiment and that the work of col-
lecting adequate numbers may be very
labour intensive. However, collected
insects, unlike laboratory reared ones, are
acclimatized to eld conditions, have a
wide genetic base and should respond nor-
mally to the presence of suitable host
plants. Laboratory reared insects will need
to be acclimated before release if their rear-
ing conditions have not been similar to the
actual environment. The length of the
acclimation period will depend on the dif-
ference between the actual and the rearing
conditions. Unless wild genes are regularly
introduced into laboratory cultures, the
reared population can very quickly become
inbred, especially when selection for the
ttest individuals takes place in small cul-
tures (Dent, 1990). Hence, there is always
the risk that the use of reared insects will
not truly represent the response of wild
insects. This may be particularly the case
when insects that have been reared on arti-
cial diets are released onto their normal
host plants. However, despite these disad-
vantages the use of reared insects has many
advantages for articial infestation, includ-
ing the ready availability of large numbers
and particular developmental stages at the
most appropriate time for experiment.
One of the simplest methods of infesta-
tion with eld collected insects, and
insects that have been reared on their host,
is to place infested cuttings on or around
the experimental plants (Wratten et al.,
1979). As the excised plant material dies
the insects will move off onto the growing
plants. The disadvantage of this technique
is that it may be difcult to control the
level of infestation when the number of
insects on each piece of excised plant is
highly variable, especially if the insects are
small and difcult to count.
Insects can be applied directly to the
plant (Bailey, 1986; Kolodny-Hirsch and
Harrison, 1986; Mulder and Showers, 1986;
Pena et al., 1986) but these techniques can
be labour intensive if a large number of
plants need to be infested. Some effort has
been directed towards the development of
simple methods and devices capable of
inoculating plants with a specic number
of insects. The eggs of Lepidoptera can be
Chapter.3 10/7/00 11:12 am Page 62
attached to plants by the substrate on
which they were laid, when the larvae
hatch they move from this onto the host
(Josephson et al., 1966). A suspension of
eggs in agar has been used to infest maize
with Helicoverpa (Widstrom and Burton,
1970; Wiseman et al., 1974) and with
Drabrotica virgifera (Palmer et al., 1979;
Sutter and Branson, 1980). Larvae of
Spodoptera frugiperda, Diatraea sacchar-
alis, D. lineolata and D. grandiosella have
been inoculated on to maize using a man-
ual larval dispenser referred to as a
bazooka (Ortega et al., 1980). The bazooka
is calibrated to deliver a uniform number
of larvae and corn cob grits mixture to each
plant to provide a highly uniform infesta-
tion of rst instar larvae. This technique
certainly has a wide potential for articial
infestations and is now commercially
available for use not only with Lepidoptera
but also with aphids and leafhoppers
(Mihm, 1989; Panda and Khush, 1995).
Cages can be used to maintain pest
infestations in isolation from the rest of a
crop. In this way the levels of attack can be
simulated irrespective of the size of the
natural pest population. Cages can cover
individual plants or large numbers of
plants depending on plant size and spacing
(Simmons and Yeargan, 1990; Helm et al.,
1992; Smelser and Pedigo, 1992). Large
cages (e.g. 8 m
3
; Wratten, 1975) that cover a
larger number of plants have the advantage
that the area contained within the cage can
be considered as a plot and sampling car-
ried out within it in the same way as other
treatment plot experiments. There should
be sufcient cages to permit replication of
both treatments (insect densities) and con-
trols (cages having no infestation). The
growth and yield of the crop inside and
outside the control cages should be com-
pared to determine the effect of the cage
environment, and the treatment yields
should be compared with the yields of
plants in the control cages.
Yield loss assessments using articial
infestation techniques are not easy to carry
out, however, if consideration is given to
careful timing of inoculation (to simulate
natural attack) this technique can provide
the most effective method for controlled
manipulation of conditions.
3 . 6 . 2 Si mul at ed damage
If an insect causes damage to the above
ground parts of a plant through defoliation
or consumption of growing points and
owers then it may be possible to simulate
this damage through articial removal of
these plant parts. The effect of damage on
yield has been measured in this way in
eld crops, particularly soybean (Simmons
and Yeargan, 1990; Browde et al.,
1994a,b,c) and in forestry (Ericsson et al.,
1985; Britton, 1988).
This technique appears to provide a
simple and practical method of studying
the effects of damage but it does have a
number of problematic drawbacks. Firstly,
it may not be easy to simulate the exact
nature of insect damage, since it may not
simply be a question of, for instance, leaf
area removed. In the case study of Taylor
and Bardner (1968; Section 3.3.2) the lar-
vae of the beetle Phaedon cochleariae
rasped the leaf surface, thus killing leaf tis-
sue by desiccation in addition to that
which they ate. The larvae of the moth
Plutella xylostella, however, ate cleanly
through the leaves and caused no sec-
ondary damage. Thus the type of defolia-
tion caused by P. xylostella would be more
easily simulated than that caused by P.
cochleariae.
Yield Loss 63
Chapter.3 10/7/00 11:12 am Page 63
64 Chapter 3
Case St udy: The effect of ar t i ci al defol i at i on on t he yi el d of pol e
bean Phaseol us vul gar i s ( van W addi l l et al . , 1 9 8 4 )
The major defoliating pests of the pole bean in southern Florida are the leaf min-
ers Liriomyza spp., cabbage loopers Trichoplusia ni, and the bean leafroller,
Urbanus proteus. The importance of the timing and extent of defoliation on the
yield of the pole bean was not known, and information obtained could be used
to provide recommendations for the necessity and timing of insecticide applica-
tion. The study was carried out to determine:
Fi g. 3 . 6 . The relationships between pole bean yields and defoliation levels for plants defoliated
on a single occasion during weeks 3, 5 and 7 after plant emergence; for plants defoliated starting
at the top of the plant (upper) and from ground level (lower) (after van Waddill et al., 1984).
Chapter.3 10/7/00 11:12 am Page 64
Yield Loss 65
1. The time at which the beans are most susceptible to defoliation; and
2. The relationship between pole bean yield and manual defoliation of beans,
when beans were defoliated once, repeatedly and at different levels within the
upper and lower halves of the plant.
A split-plot design was used to evaluate the effects of defoliation time (main
plots) and various defoliation levels (sub-plots). Treatments were replicated four
times. Each sub-plot was defoliated only once, at one of the defoliation levels of
100, 80, 60, 40 and 20% with defoliation starting from either the top of the plant
(upper treatment) or from ground level (lower treatment). Sub-plots which
were not defoliated were the controls. The times (main plots) at which defolia-
tion was carried out were 1, 3, 5 and 7 weeks after plant emergence.
For the repeated defoliation experiment, defoliation levels of 0, 10, 20, 30
and 50% were assigned to plots in a randomized complete block design. Foliage
was removed weekly so that each plot was maintained at the required defolia-
tion level when compared with the undefoliated control.
The regression analyses of the relationships between yield and levels of defo-
liation were all signicant (P < 0.005; Fig. 3.6) except for week 1. Week 5 corre-
sponds to the blooming (owering) period, as it was at this time that the plants
appeared most sensitive to defoliation. As expected in the continuous defoliation
experiment, yield decreased with increasing defoliation (Fig. 3.7) so that a con-
tinuous 50% reduction in foliage resulted in yield losses of approximately 40%.
Van Waddill et al. (1984) concluded from this study that a large proportion of
pole bean yield loss could be accounted for by defoliation. Plants were most sen-
sitive to defoliation during the blooming and pod set period.
Fi g. 3 . 7 . The relationship between pole bean yields and weekly defoliation levels (after van
Waddill et al., 1984).
Chapter.3 10/7/00 11:12 am Page 65
3 . 6 . 3 Cont rol of i ni t i al l evel s of i nfest at i on
Levels of natural infestation can be con-
trolled to provide differences of pest inten-
sity at the start of a yield loss trial. The
most common form of control measure
used is insecticides but plant varieties have
also been used (Walker, 1987).
Insecticides can be used to create dif-
ferent levels of pest infestation through
use of different doses applied at specic
times (Egwuatu and Ita, 1982), predeter-
mined application times (Dina, 1976;
Kirby and Slosser, 1984) or different
insecticides can be used to create and
maintain different levels of infestation
(Yencho et al., 1986). With natural infest-
ations the absolute level of attack and
hence the degree of yield loss between
treatment plots cannot be predetermined.
In seasons where population levels are
low yield loss may be negligible and treat-
ment differences insignicant. In addi-
tion, in situations where a number of
different pests attack a given crop differ-
ent pesticides may have to be used to con-
trol the different pests in order to separate
their effects.
The natural level of pest infestation can
also be controlled by the use of plant vari-
eties which exhibit different levels of sus-
ceptibility to the pest insect. The range of
possible intensities that can be produced
depends on the number of varieties having
variable but distinct levels of resistance.
The biggest drawback with this technique
is that ideally in the absence of pest attack
or at the same level of attack the different
varieties should produce similar yields
(Walker, 1981). In practice this is often dif-
cult to achieve.
3 . 7 Pai red Treat ment Exper i ment s
The most commonly used and the simplest
method of evaluating losses due to insect
pests is the paired-treatment experiment
(e.g. Fisher and Wright, 1981; Cole et al.,
1984; Barnard, 1985). This technique is
equally applicable to eld crops, orchards,
66 Chapter 3
Fi g. 3 . 8 . The layout of a randomized complete block strip trial in a paired-treatment experiment where: P =
protected plot; NP = unprotected plot and G = guard rows (after LeClerg, 1971).
Chapter.3 10/7/00 11:12 am Page 66
forests, stored products and livestock sys-
tems and in its simplest form involves a
comparison of the yield in control plots
where there is no infestation (control by
insecticides may be necessary) with the
yield from plots having natural or con-
trolled levels of infestation. A suitable
number of replicates is used. Treatment and
control plots should be arranged in pairs,
but the allocation of treatment or control to
each of the plots should be made at random
(Fig. 3.8). In many situations however, it is
not possible to follow this simple model,
although in principle a comparison is still
made between uninfested and infested
hosts, but the way this is achieved is
dependent on the pest/host system.
In forest systems, a common approach is
to compare the growth of trees that are
attacked by heavy infestations of defolia-
tors with that of less heavily attacked trees
(Thomas and Miller, 1994) or to compare
growth of the same trees during periods of
high and low pest attack (Seaby and
Mowat, 1993; Day and Leather, 1997). Such
studies have the problem of having only
pseudo-controls but measuring sub-lethal
effects of infestation in forest stands is dif-
cult if not impossible to manipulate in
any other way. Aerial photography has also
provided a means of estimating yield losses
from insect pests in forest plantations
(Chiang and Wallen, 1971).
Yield Loss 67
Case St udy: The effect of t he forest t ent cat er pi l l ar, M al acosoma
di sst r i a, on t he grow t h and devel opment of aspen, Popul us
t remul oi des ( D uncan and H odson, 1 9 5 8 )
The forest tent caterpillar is a defoliating pest of aspens in Minnesota, USA.
During an outbreak period between 1953 and 1955, 80 plots were studied and
information collected on:
1. the plot type as a whole;
2. individual trees;
3. the growth of the stand.
These data were then used to determine whether the defoliation caused by the
forest tent caterpillar reduced aspen growth.
The various intensities of defoliation were categorized as complete, heavy,
moderate or light. Individual tree data included a rating of defoliation, a classi-
cation of leaf size and increment cores taken from the tree trunk at chest height.
Nine to twelve per cent of the trees were estimated to have normal leaf develop-
ment one year after the last defoliation while between 63 and 88% of all trees
had normal leaf development two years after defoliation. The data had been col-
lected from 22 and 14 plots respectively. The average basal area growth (mean of
ve cores) of the aspen in 1954 was 4.88 cm without defoliation, 4.10 cm (84%)
during the rst year of light defoliation, 1.38 cm (28%) during the rst year of
heavy defoliation, 1.02 cm (21%) during the year of heavy following light defoli-
ation and 0.655 cm (13%) during the second year of heavy defoliation.
Overall, the forest tent caterpillar signicantly reduced the growth of the
aspen. Basal area losses were found to vary with defoliation intensity and history
from very little in the rst year of light defoliation to nearly 90% of the prospec-
tive growth in the second and third years of heavy defoliation. In stands with
heavy defoliation a growth reduction of between 14 and 20% occurred after ces-
sation of defoliation.
Chapter.3 10/7/00 11:12 am Page 67
Estimates of losses in stored grain are
dependent on a comparison of damaged
grain with either that prior to storage or
with undamaged grain sampled at the same
time as the damaged. The methods for esti-
mating yield losses using both these
approaches have been reviewed by Adams
and Schulten (1976). The situation in
stored grain systems is complicated by
variations in moisture levels during storage
which can have a signicant effect on
results unless these are taken into account
during the experiment. The baseline of
undamaged pre-storage grain is obtained
by the calculation and use of a dry
weight/moisture content graph.
To estimate the loss of grain weight due
to pests and micro-organisms after a partic-
ular period, a standard volume of grain is
taken and this is converted to dry grain
weight. The dry weight/moisture content
graph is then used to nd the equivalent
dry weight of a sample at the same mois-
ture content so that the weight loss can be
calculated:
For example, if the farmers grain sample
with a moisture content of 14% had a dry
weight of 500 g then, at 14% moisture con-
tent from the graph, the undamaged dry
weight is 550 g, and the percentage loss is:
Another method of estimating losses is the
count and weight method, although this is
mostly inappropriate for either very high or
low levels of infestation unless large ran-
dom samples are taken. A sample is ran-
domly selected and divided into damaged
and undamaged grains. The damaged
grains can be subdivided according to type
of damage or pest. The number of grains in
each category and their weights are deter-
mined and the percentage weight loss cal-
culated as follows:
where:
Wu = weight of undamaged grain
Wd = weight of damaged grain
Nu = number of undamaged grains
Nd = number of damaged grains.
The sample sizes for this method must be
in the order of 100 to 1000 grains.
In eld crops paired treatment experi-
ments carried out in a single eld (or a
number of paired treatment trials can be
carried out in a number of different elds)
are more objective and more reliable than
comparisons between treated and
untreated crops in separate elds. This is
because eld to eld differences in soil
type, crop variety and other cultural prac-
tices may affect crop responses and yields
to an equivalent or to a greater extent than
the treatments (Le Clerg, 1971).
In veterinary pest experiments animals
that remain uninfested may well exist
within the same herd or ock as those that
are infested, hence can be considered to be
exposed to similar conditions. Any effect
due to animal size can be reduced by
assessing differences in weight gain
between infested and uninfested animals
(see Case Study).
% weight loss =
u d d u
u d u
( . ) ( . )
( )
( . )
W N W N
W N N
+
100 3 9
550 500
550
100
50 100
550
9 1 3 8
=
= . % ( . )
% dry weight loss =
dry weight from graph
dry weight in sample
dry weight from graph
100 3 7 ( . )
68 Chapter 3
Case St udy: A compar i son of wei ght gai n i n sheep at t acked and
unat t acked by t he sheep head y, H ydrot aea i r r i t ans ( Appl eyard et al . ,
1 9 8 4 )
The sheep heady, Hydrotaea irritans is responsible for the development of open
wounds on the heads of sheep during the summer in the northern UK. The
effects of this damage on the weight gain of 125 Scottish black face lambs was
Chapter.3 10/7/00 11:12 am Page 68
The simple paired-treatment experi-
ments are used to determine whether yield
losses occur at a naturally occurring level
of pest intensity. Such experiments are car-
ried out in a single eld over which the
pest intensity is often assumed to be of the
same order of magnitude between replicate
treatments. Multiple treatment experiments
take the paired treatment approach one
stage further by increasing the number of
treatments, with each treatment represent-
ing a different intensity of pest insects. A
multiple treatment yield loss experiment
involves a more complex experimental
design, the principles of which are perti-
nent to many aspects of eld trials method-
ology in pest management.
3 . 8 Fi el d Tr i al s: Pr i nci pl es
Experimental eld trials are common to
most components of insect pest manage-
ment since every type of control option
ultimately has to be tested in the eld. With
small and specic variations eld trial tech-
niques that have been developed in relation
to agronomic evaluations are applicable to
evaluations of yield loss. The coverage pre-
sented here provides an overview of the
principles of eld trials methodology to
complement those methods relevant to
yield loss assessment already mentioned
above. Specic variations of the general
methodology are dealt with in more detail
in the relevant chapters.
Field experimentation can only be car-
ried out with good knowledge of sampling
methodology, experimental design and
statistics. Sampling methodology has been
dealt with in Chapter 2 and readers
requiring further information should refer
to Southwood (1978) and Cochran (1977).
The advice of statisticians should always
be sought at the planning stage of the tri-
als although entomologists should them-
selves have a good understanding of the
principles and statistical techniques to be
used in such trials. Most standard statisti-
cal textbooks cover both trial design and
the statistical analysis of trial data; useful
books on the subject include: Bailey
(1981), Puntener (1981) and Snedecor and
Cochran (1978). An excellent review of
Yield Loss 69
investigated. The weights of the lambs were recorded at the beginning and end of
the trial and the weight gain was calculated for each lamb. The lambs heads
were examined weekly for the presence of wounds which were quantied as fol-
lows: 0 = no lesions detected; 1 = minor lesions detected only on close inspec-
tion; 2 = moderate lesions readily detected; 3 = severe lesions requiring therapy;
and 4 = extreme damage. The level of heady damage during the trial was low
but affected animals had damage assessed as lesion score 2 on one or more occa-
sions during the trial. The unaffected animals were free of clinically signicant
lesions throughout the trial. The effect of heady damage on weight gain is
shown in Table 3.2. Lambs which suffered clinically obvious damage had a mean
weight gain of 12.18 2.31 kg compared with 14.05 1.77 kg for those that were
unaffected (P < 0.001).
Tabl e 3 . 2 . The effect of heady damage on weight gain of lambs (after Appleyard et al., 1984).
Affected Unaffected
(n = 23) (kg) (n = 102) (kg)
Mean SD Mean SD
Starting weight 18.45 2.38 17.68 2.49
NS
Finishing weight 30.63 3.52 31.72 3.01
NS
Weight gain 12.18 2.31 14.05 1.77
**
NS
not signicantly different;
**
signicant at P < 0.001.
Chapter.3 10/7/00 11:12 am Page 69
principles has also been written by Perry
(1997).
Field experimentation should begin
with small plot observations and if the
results are positive then larger scale trials
will be considered. Field trials are costly
and may take many months or years to
complete, hence it is important that avoid-
able mistakes are kept to a minimum. This
requires a great deal of thought and careful
planning, and supervision and monitoring
of the experiment. The objectives of the
experiment must be carefully dened and
the experiment only started after consider-
ation of the crop and the environment in
which the pest is to be tackled and of the
biology, ecology and epidemiology of the
pest (Unterstenhofen, 1976; Reed et al.,
1985). Under-estimation of the importance
of this understanding can seriously jeopar-
dize the experiment and the usefulness of
the results obtained. Reed et al. (1985) warn
of anomalies that may occur as a result of
conducting experimental trials at research
stations. Research stations often have pro-
longed cropping seasons, irrigation facili-
ties, pesticide free crops, sick plots for
maintaining pathogens and weed plots for
maintaining weeds. There is a clear need to
quantify the differences between crops on
research stations and those in typical farm-
ers elds with regard to the crop itself, the
pests and their natural enemies in order to
determine just how relevant are results
obtained on research stations to the real
world (Reed et al., 1985).
The properties of an experimental area
are rarely uniform; the land might have a
slight gradient in height, soil conditions or
exposure to weather such as the number of
sunshine hours. To ensure that these
effects are distributed over all treatments,
i.e. to prevent plots of one treatment expe-
riencing conditions not occurring in plots
of other treatments, it is necessary to incor-
porate randomization and replication into
the trial design.
The simplest method of ensuring that
particular treatments are not positioned in
such a way as to produce any bias is to ran-
domly allocate treatment replicates to spe-
cic locations within the trial area. One
way of dealing with this is to use a random-
ized block design, which is based on the
principle that patches of ground that are
close together tend to be similar, while
more distant patches differ. The blocks in
the trial (consisting of a small number of
plots) and the plots in each block are con-
sidered to be experiencing similar soil, pest
and environmental conditions. Within each
block, each treatment is randomly allocated
a plot position. The conditions may differ
between blocks (Fig. 3.9a). The layout and
shape of blocks will depend on the condi-
tions in each experimental area; although
70 Chapter 3
(b)
B
D
A
D
C
A
C
B
B
D
A
B
C
A
D
C
(a)
A
B
C
D
D
C
A
B
A
D
C
B
B
C
A
D
Gradient
Fi g. 3 . 9 . A complete randomized block design: (a)
the blocks arranged according to the gradient; and
(b) according to various levels of infestation,
depicted by the intensity of shading.
Chapter.3 10/7/00 11:12 am Page 70
Yield Loss 71
the ideal shape for a block is a square (this
reduces the edge length relative to the area
occupied) the experimenter should use his
knowledge of the differences in soil fertil-
ity, yield uniformity, drainage etc. to deter-
mine the exact shape of the blocks. A
pre-count of pest numbers may reveal dif-
ferences in the relative size of pest infesta-
tion over the experimental area, and blocks
could be allocated to take this distribution
into account (Fig. 3.9b). The blocks act as
replication for each treatment.
Thus, the randomization of treatment
plots within a block ensures that localized
variability in conditions does not cause
bias and the blocking ensures that any dif-
ferences over the experimental area do not
bias treatment differences. However, when
variation gradients within a site are not
known, the use of blocks may result in
their being positioned across gradients, in
which case the assumptions made in any
subsequent analysis would be incorrect. In
such situations a complete randomized
design would be more appropriate. The
complete randomized block design is fairly
common in experiments where the number
of treatments varies between ve and 20
with fewer replicates than treatments
(Simmonds, 1979).
A variation of the basic complete ran-
domized block design is the Latin Square
design. This is used in experiments where
there are only a small number of treat-
ments. The basic property of the Latin
Square is that each treatment must appear
once in every row and once in every col-
umn (Fig. 3.10). Differences in conditions
between rows and differences between
columns are both eliminated from the com-
parison of the treatment means, with a
resultant increase in the precision of the
experiment (Snedecor and Cochran, 1978).
The use of the Latin Square is limited to
situations where the number of replicates
can equal the number of treatments. To
construct a Latin Square, write down a sys-
tematic arrangement of the letters and
rearrange rows and columns at random.
Then assign treatments at random to the
letters (Snedecor and Cochran, 1978).
When a large number of treatments is
used then the size of the blocks in a ran-
domized block design is large and variation
in conditions within the block might occur.
For large numbers of treatments a range of
experimental designs collectively referred
to as Incomplete Block designs may be
used. They all have in common the use of
compact, smallish blocks, any of which
contains only a proportion of the total
entries (Simmonds, 1979). These designs
make comparisons between pairs of treat-
ments ensuring that all pairs of treatments
are equally accurate, that differences
between blocks can be eliminated. In bal-
anced incomplete block designs every pair
of treatments occurs together in the same
number of blocks and hence all treatment
comparisons are of equal accuracy (John
and Quenoulille, 1977). For example, ve
treatments may be arranged in ten blocks of
three treatments; ABC, ABD, ABE, ACD,
ACE, ADE, BCD, BCE, BDE and CDE. In
this design each treatment occurs six times
and each pair of treatments occurs together
in three blocks (John and Quenoulille,
1977). However, this design uses every pos-
sible combination of three treatments
which requires a large number of replica-
tions. The number of replications may be
Fi g. 3 . 1 0 . A Latin Square trials design, with ve
treatments: A, B, C, D and E.
Chapter.3 10/7/00 11:12 am Page 71
72 Chapter 3
decreased by using designs in which every
possible combination of treatments are not
used. This subject is dealt with further in
Chapter 5.
More complex experimental designs
will be required if the interaction of a num-
ber of treatments needs to be assessed, for
example, when testing the effects of differ-
ent dosage levels of two insecticides on the
yield of resistant and susceptible crop cul-
tivars. In this situation, where the interac-
tion of a number of combinations of
different variables needs to be studied, a
factorial trial design can be used (Fig.
3.11). Factorial experiments compare all
treatments that can be formed by combin-
ing the different levels of each of the differ-
ent factors (variables). A variation of the
straightforward factorial design is the split-
plot or nested design where precise infor-
mation is required on one factor and on the
interaction of this factor with a second, but
less precision is required on the second
factor. This type of design is particularly
useful where small scale experiments need
to be tested on different large scale
schemes such as irrigated and non-irrigated
land or land cultivated by different means.
The irrigated/non-irrigated plots provide
the main plots which are then divided into
X1
Y3
Z1
X2
Y3
Z1
X1
Y1
Z1
X1
Y2
Z3
X1
Y3
Z2
X2
Y2
Z1
X2
Y2
Z2
X1
Y2
Z2
X2
Y1
Z1
X1
Y2
Z1
X2
Y1
Z2
X2
Y2
Z2
X1
Y3
Z3
X2
Y3
Z2
X1
Y1
Z2
X1
Y1
Z3
X2
Y1
Z3
X2
Y2
Z3
Fi g. 3 . 1 1 . An example of a factorial trial design
with three factors. Factor X had two treatments
while factors Y and Z have three treatments each.
The number of plots is: 2 3 3 = 18.
Fi g. 3 . 1 2 . The rst two blocks of a split-plot
experiment on alfalfa, illustrating the random
arrangement of main and subplots (after Snedecor
and Cochran, 1978).
BLOCK I
COSSACK RANGER LADAK
D A C B B A D C A C D B
BLOCK II
LADAK COSSACK RANGER
C D B A B A D C A C B D
Chapter.3 10/7/00 11:12 am Page 72
smaller subplots, for the smaller scale
experiments (Fig. 3.12). The essential fea-
ture of a split-plot design is that the sub-
plots are not randomized within each block
(Snedecor and Cochran, 1978).
All of the above experimental designs
have been used successfully for many years
for experiments carried out on research sta-
tions. Ultimately trials should be carried
out to assess the effectiveness of treatments
under conditions experienced by farmers
and growers. In the real world it may not be
possible or even desirable to set up and
carry out experiments using classical exper-
imental design procedures. In the tropics
for instance, it can often be difcult to use
permanent markers for plots because local
people nd the materials useful for other
purposes and an experiment can easily be
ruined if the plot markers are removed.
An alternative to conventional experi-
mental designs that is used in, for instance,
mating disruption experiments is the use of
whole eld experiments or area-wide
experiments where plots tend to be large
elds or a number of elds and the treat-
ments are not replicated. There are many
disadvantages with this approach: system-
atic errors may arise because treatments are
not replicated and uniform trial areas are
unlikely on such a large scale; there is a
resultant increase in variability and only
relative rather than absolute measurements
can be obtained (Puntener, 1981). However,
if treatments are effective then differences
have been demonstrated under realistic
practical conditions and can provide tangi-
ble evidence of the value of a treatment.
Certainly all prospective pest management
control options should be tested in on-farm
trials as the nal proof of their value before
being recommended to users.
The choice of plot size for experimental
trials will depend on:
1. The type of crop used.
2. The type of equipment needed or used
to apply treatments.
3. The amount of plant/pest material
required for sampling and evaluation of
treatments.
4. The size required to maintain plot vari-
ability at a suitable level.
The use of too large a plot will be wasteful of
land and resources, while too small a plot
will increase the variability of the data. Such
variability will be partly dependent on inter-
ference or inter-plot effects, when the treat-
ment of one plot interacts with an insect
population on an adjacent plot. This effect is
thought to be caused by movement of the
pest and/or its natural enemies between
treatment and control (untreated) plots. In
insecticide trials spray drift can also have an
effect. The inter-plot effect can potentially
inuence the results of experimental trials,
with yield and insect numbers affected by
the proximity of a trial plot to other treated
or untreated plots. For instance, the yield of
untreated plots of cotton and the size of pest
infestation of plots (each 4.2 ha) were
affected by the presence of insecticide
treated plots 150 m away (Joyce and Roberts,
1959). The insect pests can move from
untreated plots where infestation may be
high to treated plots where they are killed;
thus without equivalent immigration into
the untreated plots the infestation is reduced
and yield increased to a level greater than
would normally be expected in true
untreated eld conditions. Movement and
death of predators and parasites in treated
plots would confound the difference in the
untreated plots. Joyce and Roberts (1959)
proposed an ideal layout of treatments to
determine the size of the untreated area that
would be required for a plot to approximate
to being in an entirely unsprayed environ-
ment (Fig. 3.13). Measures to reduce the
inter-plot effect have however become com-
monplace in eld trial methodology. These
include the use of discarded or disregarded
guard rows or border areas and the sampling
and harvesting of only the most central area
of each plot (Fig. 3.13).
3 . 9 Economi cs of Yi el d Loss
Pest infestations can affect crop/livestock
yield which in turn will determine the
Yield Loss 73
Chapter.3 10/7/00 11:12 am Page 73
revenue received by the farmer for sale of
the product. If effective pest control tech-
niques are available then farmers can
increase their yields and their prots pro-
vided they know when it is economic to
apply control measures. Thus, for effective
and economic control of pests, and for
maximizing returns on crop yields infor-
mation is needed on the relationships
between pest infestation and crop yield,
crop value, control costs and control effec-
tiveness.
3 . 9 . 1 I nfest at i on and yi el d l oss
The type of damage caused by insects
varies greatly, due to the confounding
effects of the intensity of infestation, dura-
tion of attack and plant growth stage.
Despite this, it is useful to identify general
forms of the relationships between yield
and damage caused by insects. These rela-
tionships are categorized as: susceptive,
tolerant or over-compensatory (Poston et
al., 1983).
The susceptive response (Fig. 3.14a) is
typical of insects such as seed borers that
cause direct damage to their host. With
direct damage the yield declines in direct
proportion to the number of insects present.
For instance, the total number of seeds
damaged will be the product of the total
number of seeds consumed during the life-
time of a larva and the total number of
larvae present. The second response is
referred to as the tolerant response (Fig.
3.14b) and is typical of insects feeding on
the plant foliage or roots where a certain
level of damage can be tolerated before
yield is affected. Above the threshold level
of damage, yield declines rapidly with
increasing insect intensity, in much the
same way as the susceptive response. The
third response is the over-compensatory
response where the plant initially reacts to
the presence of damage in such a way that
yield is actually increased above that which
would have been achieved in the absence of
the pest. This response is usually limited to
early infestations and low levels of damage,
so that damage greater than that causing
over-compensation will reduce plant yield
(Fig. 3.14c). Over-compensation is less com-
mon than partial or complete compensation
for insect damage (Capinera et al., 1986).
The ability of a plant to compensate is
inuenced by several factors, including
plant phenology, environmental conditions
and the level of injury (Bardner and
Fletcher, 1974; McNaughton, 1983).
Even extensive defoliation may not sig-
nicantly reduce yield (Bennett et al.,
1997) and some cultivars have a high tiller-
ing capacity and can readily replace tillers
damaged by stem borers (Rubia et al., 1996;
Bennett et al., 1997) while plant death can
induce compensatory growth of surviving
plants thereby reducing yield loss (Dewar,
1996). Such compensatory effects need to
74 Chapter 3
Fi g. 3 . 1 3 . The layout of treatments that would be required to determine the size of the untreated area
needed for a plot to approximate an environment in which no insecticides are sprayed. The hatched area is
the sprayed area and the central square the actual experimental plot. The margin surrounding the
experimental plot gets progressively larger per treatment IVI (after Joyce and Roberts, 1959).
Chapter.3 10/7/00 11:12 am Page 74
be taken into account in any analysis of
crop loss, especially with regard to the eco-
nomics of control.
The presence of a pest insect infestation
that creates sufcient damage to cause a
yield loss will affect the value of the crop
and hence, the income of the farmer. The
form of the relationship between pest
intensity, crop injury, crop yield, crop
price and revenue can be generalized for
insects attacking foliage/roots or crop prod-
ucts (Fig. 3.15). For pests that attack
foliage, roots and crop products (grains,
fruits, tubers) the amount of injury is lin-
early related to the pest intensity. The rela-
tionships can differ, however, for the effect
of pest injury on yield (Fig. 3.15). When
insect pests damage the foliage and roots of
plants, and these are not the crop product,
then at low pest intensities the price
obtained for the crop product will remain
high and only begin to tail off when pest
intensities are high (Fig. 3.15). The effect of
damage to the crop product on price is sim-
ilar in form to the relationship between
pest intensity and yield, while the effect of
the pest on revenue, because of the impor-
tance of the pestquality relationship, will
result in the curve being a more extreme
form of the pestyield curve (Fig. 3.15). In
most cases the pestrevenue curve for
foliage and root attacking insects will be
identical to that of the pestyield relation-
ship (Southwood and Norton, 1973).
3 . 9 . 2 Economi c t hreshol d concept
Historically one of the rst major shifts in
emphasis away from sole use of chemical
insecticides for pest control and towards
management of pests and IPM, involved
the development and use of economic
thresholds. The concept of the economic
threshold has remained relatively consis-
tent over time, although there has been a
preponderance of terms devised to describe
essentially the same thing, which has cre-
ated some confusion (Morse and Buhler,
1997). The original denition of the eco-
nomic threshold was coined by Stern et al.
(1959) as the density at which control
measures should be determined to prevent
an increasing pest population from reach-
ing the economic injury level. The eco-
nomic injury level (EIL; sometimes
referred to as the damage threshold) is the
Yield Loss 75
Fi g. 3 . 1 4 . Generalized plant responses to insect
damage: (a) susceptive response; (b) tolerant
response; and (c) over-compensatory response (after
Poston et al., 1983).
Chapter.3 10/7/00 11:12 am Page 75
lowest population density that will cause
economic damage and economic damage
being the amount of injury which will jus-
tify the cost of articial control measures
(Stern et al., 1959). What was meant by
will justify was not made entirely clear
but it has subsequently been accepted to
mean the density of the pest at which the
loss through damage just exceeds the cost
of control (Mumford and Norton, 1984).
The mathematical formulae for calculat-
ing economic injury levels are simple
76 Chapter 3
Fi g. 3 . 1 5 . The generalized forms of relationship between pest intensity, injury, crop yield, price and
revenue. Effect of: (a) pest on crop injury; (b) pest injury on yield; (c) pest injury on crop price; and (d) pest
on crop revenue (after Southwood and Norton, 1973).
Chapter.3 10/7/00 11:12 am Page 76
enough. A general model for a range of
pests that has been widely used is that of
Pedigo et al. (1986; see below) but other
variations on this form are available (e.g.
Norton, 1976; Regev et al., 1976).
EIL = C / V I D K (3.10)
where
EIL = economic injury level
C = cost of control ($ ha
1
)
V = market value of product ($ tonne
1
)
I = injury per insect per production unit
(e.g. % defoliation per insect h
1
)
D = damage per unit injury (tonnes reduc-
tion ha
1
= % defoliation)
K = control coefcient (the percentage
reduction in pest attack).
However, obtaining the above information
to incorporate into the formula is not easy.
It is especially difcult where natural ene-
mies are involved in population regulation,
where a number of insecticide applications
are required during a season or where dam-
age can be caused at different stages of
plant growth (Mumford and Norton, 1984).
Reichelderfer et al. (1984) provide sum-
mary guidelines for a method that is proba-
bly as generally applicable as any:
1. For a range of pest densities (including
zero pests), measure yield and quality of
the crop by means of controlled experi-
ments. Pest density measurements should
be made by counting or rating the percent-
age of plant parts damaged. These yield
and pest observations should be on plots
with no management actions, but should
be made early enough in the season so that
management actions can be taken.
2. Total crop revenue is computed for
each management action at each density by
multiplying yield by price per unit of out-
put.
3. Subtract the cost of each management
action from the crop revenue for that action
at each of the various initial pest densities;
call these net revenues.
4. Beginning at very high pest densities
and moving to lower densities, compare
net revenues for taking a management
action with those for taking no action. By
comparing net revenues, nd the pest pop-
ulation where net revenue for taking an
action is equal to that for not taking an
action. The pest density where the net rev-
enues under controlled and uncontrolled
circumstances are equal is the action
threshold.
The cost of each management action has
previously only been viewed in terms of
the direct costs (and benets) to the user
but more recently there is a growing appre-
ciation that some management actions also
bear an environmental cost. If we can place
a monetary value on these environmental
costs (e.g. the cost of pollution or of
destroying non-target populations with a
chemical insecticide) then it is possible to
include these costs in the variable C
(Pedigo and Higley, 1992). Higley and
Wintersteen (1992) estimated the level of
risk posed by 32 eld crop insecticides to
different environmental components (sur-
face water, ground water, aquatic organ-
isms, birds, mammals and benecial
insects) and to human health (acute and
chronic toxicity). Producers were then
questioned about how much they would be
willing to pay (higher pesticide costs or
yield losses) to avoid different levels of risk
from a pesticide application. By including
these environmental costs in C, many of
the EILs doubled. Such additions in costs
included in EILs may result in less fre-
quent insecticide application or by assign-
ing more realistic costs to insecticide use,
alternative methods with lower or negligi-
ble environmental costs may become eco-
nomically feasible (Pedigo and Higley,
1992).
3 . 9 . 3 Economi c t hreshol ds i n pract i ce
Stern et al.s (1959) economic threshold is
more commonly referred to as the spray
or action threshold and the economic
injury level as the economic threshold
(Blackshaw, 1995). In practical terms there
are different types of economic threshold
depending upon their exibility and how
they have been determined (Table 3.3;
Poston et al., 1983; Morse and Buhler,
Yield Loss 77
Chapter.3 10/7/00 11:12 am Page 77
1997). At one end of the scale are the sub-
jective ETs (nominal and simple thresh-
olds), which are more or less xed gures
representing an average of the pest density
at which the cost of control is warranted,
and at the other end of the scale are objec-
tive ETs, which are based on comprehen-
sive research (Morse and Buhler, 1997).
The objective ETs are based on estimated
ETs and are exible over time whereas the
subjective ones are typically derived by
experience and are often no more than
rules of thumb or guestimates. In prac-
tice, it is the subjective ETs that predomi-
nate (Pedigo, 1996) and amongst these the
action threshold is very common.
Action thresholds have been calculated
for a number of insect species, e.g.
Amblyomma americanum on cattle (Barnard
et al., 1986), Aeneolamia varia in sugar cane
(Norton and Evans, 1974), Keiferia lycopersi-
cella in tomato, Acyrthosiphon pisum on
green peas (Yencho et al., 1986), Tipula
species in barley (Norton, 1976; Blackshaw,
1994), Epiphayas postvittana in top fruit
(Valentine et al., 1996) and aphids in cereals
(Elliott et al., 1990). Composite thresholds
have been calculated for Helicoverpa
armigera, Earias vittelli and Pectinophora
gossypiella in cotton (Keerthisinghe, 1982)
and for Trichoplusia ni, Plutella xylostella
and Pieris rapae in cabbage (Kirby and
Slosser, 1984).
Considerable effort has gone into eco-
nomic thresholds (e.g. Table 3.4 for pests of
soybean) but this may have reached its limit
for some crop pest complexes. Such a large
number of variables makes it extremely dif-
cult to obtain economic thresholds that are
generally applicable. Hence, although the
economic threshold concept serves as a
basis for decision making in insect pest
management, the determination of such
thresholds has proved to be one of the
weakest components in management pro-
grammes, with the result that very few
research based thresholds have been devel-
oped (Poston et al., 1983). Ultimately some
situations are just too complex or, irrespec-
tive of the suitability of the data or how
good the understanding of damage func-
tions, some pest-crop complexes are just
inherently uncertain (Table 3.5). Thresholds
represent only one way of assisting decision
making and should not be seen as a univer-
sal solution (Mumford and Knight, 1997).
78 Chapter 3
Tabl e 3 . 3 . Types of thresholds employed in crop protection (from Morse and Buhler, 1997; Poston et al.,
1983).
Type of threshold Description
Nominal Based on eld experience and logic
(e.g. subjective ET) Values remain static
Simple Calculated from crude quantication of the average pest-host relationship
(e.g. subjective ET) in terms of pest damage potential, crop market value, control costs,
and potential crop yield
Generally inexible to change over time
Comprehensive Based on interdisciplinary research incorporating the total production
(e.g. objective ET) system on a given farm and including factors such as multiple pest
and crop stress effects
Very exible to change over time
Fixed ET: set at a xed percentage of the EIL
Descriptive ET: includes projections of pest population growth based
on simulation models
Dichotomous ET: based on samples taken over time and classifying the
population as economic or non-economic as a result of analysing
the sample data
Chapter.3 10/7/00 11:12 am Page 78
Yield Loss 79
Tabl e 3 . 4 . Economic injury levels (EILs) for selected foliage- and pod-feeding arthropods on soybean at
growth stages R3 to R5. Values based on average recommendations for the major soybean growing regions
of the USA, which may differ for different growing regions of the world (Sinclair et al., 1997).
Pest complex Representative species Economic injury level
Fol i age- feedi ng ar t hropods at grow t h st ages R3 t o R5
Lepidopterous Anticarsia gemmatalis 2025 larvae (>1.2 cm)/row m +
15% defoliation
Epinotia aporema 30% of growing tips attacked
1
Helicoverpa zea 810 larvae/m row
Plathypena scabra 2530 larvae (>1 cm)/row m + 15%
defoliation
Pseudoplusia includens 2025 larvae (>1.2 cm)/row m +
15% defoliation
Coleopterous
2
Cerotoma spp. 20 beetles/row m + 15% defoliation
Epilachna varivestis 1520 adults + larvae (<0.5 cm)/row
m + 15% defoliation
Pod- feedi ng ar t hropods at grow t h st ages R5 t o R7
Coleopterous Cerotoma spp. 2025 beetles/row m = 812%
pod injury
Hemipterous Various species
3
23 large bugs/row m
Lepidopterous Helicoverpa zea 23 larvae (>1.5 cm)/m row
Tortricid and Pyralid spp. EILs not dened
1
EIL dened for conditions in southern Brazil.
2
Other Coleopterous species that could also follow these EILs are: Aulacophora sp., Colaspis brunnea,
Diabrotica spp. and various species of Meloidae.
3
Includes: Acrosternum hilare and Nezara viridula.
3 . 1 0 D i scussi on
Yield loss assessment data are fundamental
to insect pest management, since they are
the means by which an insect is judged a
pest. Yield is also the ultimate criterion by
which the efcacy of control measures is
assessed, and they form the basis for deci-
sion making in insect pest management
programmes. Despite these reasons, there
are surprisingly few yield loss studies car-
ried out, and this is true for both developed
and developing countries (Reed, 1983). To
a large extent the reasons for this are asso-
ciated with the difculties involved in car-
rying out yield loss experiments. Even the
simplest approach to crop loss assess-
ments, paired-plot comparisons, are
fraught with difculties. Economic ento-
mologists apply insecticides knowing that
they provide the largest return if they are
applied to dense, well fertilized, high
yielding cultivars. Hence, many paired-plot
comparisons are carried out under such
conditions which can result in massive
yield differences, thereby giving high esti-
mates of insect pest losses (Reed, 1983).
Given the difculties of yield loss assess-
ment it is not surprising that yield losses
are assumed when large pest infestations
occur, or when losses are so obvious that it
is considered inappropriate to waste effort
quantifying losses when control measures
are desperately needed. Even when thresh-
olds have been obtained, they may not be
used correctly (Wratten et al., 1990), only
Chapter.3 10/7/00 11:12 am Page 79
as a guide (Blackshaw, 1994), they may be
inefcient (Waibel, 1987) or uneconomic
(Szmedra et al., 1990). Hence, there appear
to be few incentives for carrying out exper-
iments to obtain yield loss data and calcu-
late economic thresholds.
It could be that a change of emphasis is
required. The methodologies exist, it is just
the complex interactions of so many vari-
ables over space and time that seem to
make the loss assessment approach so
unworthwhile. Perhaps longer term experi-
ments with pests in specic ecological
zones are necessary to resolve the problem
(Judenko, 1972). In the same way that
research institutes and experimental sta-
tions are prepared to run long term moni-
toring devices such as suction or light traps
(not without substantial investment of time
and resources in some instances), so they
could run long term eld evaluations of
crop losses to pests. National and regional
research institutes would be obvious loca-
tions for such work. These studies should
be carried out in tandem with those pro-
viding information for crop physiological
models (Sections 3.5.1; 3.5.2) and the sim-
ulation models (e.g. Allen, 1981). This
combined approach should ensure that
yield loss assessment receives adequate
attention and provides the much needed
baseline information for IPM programmes.
80 Chapter 3
Tabl e 3 . 5 . Conditions that make threshold prediction more or less uncertain (Mumford and Knight, 1997).
Threshold uncertainty Threshold uncertainty
is reduced is increased
Prices Fixed Market values
Type of damage Direct (i.e. feeding on the part of plant harvested) Indirect
Crop growth Consistent (irrigation) Variable (rainfed)
Pest attack Short duration Long duration
Slow reproduction Fast reproduction
Tied to crop stage Independent of crop stage
Endemic pests Immigrant pests
Later season Earlier season
Weather conditions Controlled (greenhouse) Temperate areas
Constant (irrigated crops, arid areas)
Scouting Cheap Expensive
Easy to detect damage or presence Cryptic stages or damage
Control application No pesticide resistance Variable resistance
Not affected by weather Affected by weather
(adjuvants/stickers, or in dry climate)
Natural enemies Very high or very low Variable natural control
Natural control, stable source nearby
Chapter.3 10/7/00 11:12 am Page 80
4.1 Introduction
Chemical insecticides have been consid-
ered an essential component of insect pest
control since the early 1950s when
organochlorine insecticides were rst
widely introduced. Since that time, how-
ever, the problems associated with insecti-
cide misuse and the advent of more
ecologically sound IPM approaches have
raised doubts about the wholesale use of
insecticides as a sole means of pest control.
Increasingly the use of chemical insecti-
cides has been considered in terms of judi-
cial applications within the context of a
more sustainable IPM approach. Despite
this, however, the chemical insecticide
market is estimated to be worth US$8 bil-
lion annually which ably demonstrates the
value placed on insecticides by farmers
and other purchasers worldwide. While it
may be appropriate to decry insecticides
for their poor environmental and safety
record, insecticide use remains a corner-
stone of pest management and is likely to
continue as such for many years to come.
The correct and rational use of insecti-
cides is a complex process that draws on a
thorough knowledge of:
100 4 2 ( . )
% efficacy =
a
a
b
b
1 100 4 1
T
C
C
T
( . )
92 Chapter 4
Table 4.2. The approximate range of spray volumes applied in eld crops and trees and bushes (from
Matthews, 1979).
Volume of spray (l ha
1
)
Description of spray Field crops Trees and bushes
High volume >600 >1000
Medium volume 200600 5001000
Low volume 50200 200500
Very low volume 550 50200
Ultra low volume <5 <50
Chapter.4 10/7/00 11:36 am Page 92
from the surface to the insect. Thus, the
type of target must inuence the choice of
droplet size (Table 4.3) which in turn will
inuence the volume application rate (Fig.
4.5). The droplet density that is required
will depend on the size of the insect and
its mobility, higher densities of small
droplets would be required for a small,
immobile insect egg than for a large, highly
mobile caterpillar.
Reducing droplet size but maintaining
the same level of active ingredient
increases the concentration of the insecti-
cide which is not necessarily desirable.
The required concentrations for reduced
volumes of spray have to be evaluated by
experiment, but the concentration of active
ingredient should not normally exceed
10% of a droplet (Matthews, 1984; Fig.
4.6). The inuence of differing percentage
concentrations of active ingredient for a
range of droplet sizes on the toxicity of the
acaricide difocol against eggs of the red
spider mite, Tetranychus urticae, was aptly
illustrated by Munthali (1981). This study
indicated that the most effective treatment
did not occur at the highest concentration
Insecticides 93
Fig. 4.4. The interaction of droplet diameter with density and application rate, and with LD
50
ng per insect
and the percentage concentration of active ingredient (a.i.) per droplet.
Table 4.3. Optimum droplet size ranges for selected
targets (from Matthews, 1979).
Droplet sizes
Target (m)
Flying insects 1050
Insects on foliage 3050
Foliage 40100
Soil (and avoidance of drift) 250500
Fig. 4.5. The relationship between the number of
droplets (1, 2, 5, 10, 20, 50, 100; number cm
2
),
their diameter and the volume of spray applied
(after Johnstone, 1973).
Chapter.4 10/7/00 11:36 am Page 93
of active ingredient but at a 1% concentra-
tion with an appropriate droplet size and
density (Fig. 4.7).
4.5.3 Factors inuencing the target and
pick-up
An insecticide can only control an insect
pest if it is applied in such a way that it
reaches its intended insect target. This tar-
get can be the eggs, nymphs, larvae, pupae
or adults, depending on which are the most
harmful stages and the ease with which
they can be targeted. The different life cycle
stages of an insect vary in behaviour and
habitat use which affects their trans-
parency to the insecticide, that is, their
presence at a site that can be usefully
treated with an insecticide. For instance,
boring stages of an insect will be more dif-
cult to target with an insecticide than foliar
feeders. Thus, there is a need to understand
the basic biology, resource use and behav-
iour of a pest insect before an insecticide
can be applied effectively (Fig. 4.8).
Insecticides can be transferred to their
target insects by direct interception, by
gaseous or contact transfer or through
ingestion of treated material. Direct inter-
ception of droplets by a target insect can
occur by either impaction or sedimentation
and is dependent on the insects size and
shape as well as droplet size and density.
Different parts of an insect will be more
likely to intercept droplets than others, so
that the surface distribution of droplets
will depend on the morphology of the
insect. In ying locusts the area on which
sedimentation and impaction occurred was
calculated using a measurement referred to
as the horizontal equivalent area (HEA;
Wootten and Sawyer, 1954). When only
large droplets and the process of sedimen-
tation on the horizontal plane of the insect
is involved, then the HEA was dened as
the horizontal plane area which, when
passed through a curtain of droplets of a
given diameter at the same velocity of a
locust, collected the same number of
droplets as the locust. However, droplets
are also transferred by impaction as the
locust ies into a spray and hence the HEA
by denition is the horizontal area which
collects by sedimentation alone the same
number of droplets as the locust collects by
sedimentation and impaction. An approxi-
mate allowance for impaction was made by
adding to the area of the locust, the pro-
jected horizontal area of the surfaces on
which impaction takes place, and then
treating the problem as one of sedimenta-
tion only (e.g. Fig. 4.9; Wootten and
Sawyer, 1954). The HEA was greater for
small droplets than for large and was also
inuenced by the air speed of the locust
(Fig. 4.10). A change in air speed from 3 to
5 m s
1
(Fig. 4.10) added about 10% to the
HEA for larger droplets and about 80% for
smaller ones; that is, as the locust increases
its air speed the importance of pick-up by
impaction of small droplets increases dra-
94 Chapter 4
Fig. 4.6. The relationship between toxicity (1, 10,
100, 1000; LD
50
ng per insect), droplet diameter
and the concentration of a.i. for one droplet to
contain an LD
50
dose (Johnstone, 1973).
Chapter.4 10/7/00 11:36 am Page 94
Insecticides 95
Fig. 4.7. The relationship between the LD
50
(4 days post-treatment) of dicofol and the concentration applied
against the red spider mite Tetranychus urticae on the adaxial surface of beans, for a range of droplet sizes
(after Munthali and Scopes, 1982).
matically. The impaction of droplets
occurred mainly on the wings of the locust
and on the head region; this in association
with a more even distribution of deposit
was thought to be responsible for the
observed toxicity response.
Insects such as locusts will readily
intercept droplets because they are rela-
tively large and mobile, so that if they are
within a spray area their chances of inter-
cepting an insecticide will be increased the
more they y around. The situation with
small, sessile life stages of insects is com-
pletely different. In such cases the proba-
bility of interception is entirely dependent
on the location of the insect and its size in
relation to the size and density of droplets.
When difocol was applied to the adaxial
leaf surface of bean plants with an in-ight
diameter of 53 m and density of 300
drops cm
2
, only 10% of eggs of the red
spider mite were directly hit by spray
droplets (Munthali and Scopes, 1982).
Small insects such as aphids, mites or
whitey may be less susceptible to direct
interception of insecticide droplets than
Chapter.4 10/7/00 11:36 am Page 95
larger insects but because of their small
size they may be more susceptible to a
gaseous form of insecticide transfer.
Insecticides that have a high vapour pres-
sure (>10
2
Pa), such as demeton-S-methyl,
dichlorvos and phorate may, in conditions
of still air, saturate the air of the boundary
layer with toxic vapours. Small insects that
are within the boundary layer may receive
a lethal dose of an insecticide by gaseous
transfer, while larger insects that have a
signicant portion of their bodies above the
boundary layer are less likely to succumb.
Ford and Salt (1987) considered the effec-
tiveness of gaseous transfer to be depen-
dent on the insect body size, its location
and behaviour (sessile insects would be
most susceptible), the air speed at the plant
surface, vapour pressure and the toxicity of
the active ingredient. However, there are
few insecticides which have high enough
vapour pressures at appropriate tempera-
tures for this method of transfer to be gen-
erally applicable; the main processes of
transfer of insecticides involve direct con-
tact and ingestion by insects.
Contact insecticides are only appropri-
ate against insects that are sufciently
mobile to ensure they come into contact
with the insecticide deposit. Contact with
the insecticide deposit will depend on
droplet size and density. In addition, the
proportion of the insect that comes into
contact with the deposit and the extent of
movement over treated areas will also
inuence insecticide transfer.
The size and nature (e.g. oils) of the
deposit will affect the transfer of insecti-
cide to the insect. While large particles
may be more readily dislodged from an
96 Chapter 4
Fig. 4.8. Factors that could inuence the location of insects on their hosts.
Chapter.4 10/7/00 11:36 am Page 96
Insecticides 97
Fig. 4.9. The estimation of the horizontal equivalent (HE) area (HEA) of a locust: (a) variation of HE of a
vertical measurement projected at various angles of approach of droplets; (b) horizontally projected area; (c)
vertical areas presented to droplets (after Wootten and Sawyer, 1954).
Chapter.4 10/7/00 11:36 am Page 97
insect cuticle once picked up, small parti-
cles which can penetrate the insect cuticle
more effectively tend to adhere to a surface
making transfer to the insect more difcult
(Ford and Salt, 1987). The pick-up and
retention of DDT crystals was described for
the tsetse y, Glossina palpalis, by
Hadaway and Barlow (1950). Particles were
picked up on the legs and ventral surface
of the abdomen. The small particles were
transferred from the legs to the antennae,
head and other body parts as the ies
cleaned themselves. The few larger crystals
picked up by the insects were easily
removed from the body during cleaning
and other movements. Particles were
picked up on the legs and ventral aspect of
the abdomen as these were the parts of the
insect that came into contact with the
treated surface. Insects that are not capable
of ight or larvae that have a large sur-
face/contact area and spend a large amount
of time crawling or walking across treated
surfaces are most susceptible to this form
of insecticide transfer, e.g. lepidopterous
larvae. The behaviour of the insect will
also affect the likelihood of contact with
insecticides. However, insect behaviour
may be inuenced by the presence of
insecticide deposits (Head et al., 1995).
Spodoptera littoralis moves 45 times faster
when walking than when feeding (Salt and
Ford, 1984) and this difference could
account for the proportion of contacted
deposit that is transferred to the insect
(Ford and Salt, 1987).
The feeding behaviour of the insect may
affect the uptake of a stomach poison
applied to the food of the pest insect. The
insecticide must be applied to a site on
which the insect feeds, the coverage must
be sufcient for a lethal dose to be
ingested, repellancy and vomiting of the
insecticide must be avoided, and the
deposit size should be small enough to be
eaten by the insect. Wettable powder
deposits tend to remain proud of the leaf
surfaces and hence are less likely to be
ingested than emulsiable concentrates
that sometimes mix with leaf epicuticular
waxes (Ford and Salt, 1987).
The behaviour of target insects must
always be studied, in some instances it
reveals unexpected results and invaluable
information. A study of particle size and
bait position on the effectiveness of boric
acid and sodium borate to control the
American cockroach, Periplaneta ameri-
cana, (Scriven and Meloan, 1986) provided
a possible explanation for variable results
found previously by other workers. The
cockroaches do not intentionally feed on
the boric acid or borate but if it is provided
at an appropriate particle size (< mesh size
80) and placed in positions where normal
behavioural patterns take the cockroaches
(such as along edges and corners) then the
ne powder is picked up by their bodies.
However, the insecticidal effect only
occurs when the cockroaches ingest the
particles as they clean themselves. The
results of experiments depend on where
the compounds are placed and the particle
98 Chapter 4
Fig. 4.10. The horizontal equivalent area (HEA) as a
function of droplet size at locust ight speeds of
3 m s
1
( ) and 5 m s
1
() (after Wootten
and Sawyer, 1954).
Chapter.4 10/7/00 11:36 am Page 98
size distribution of the powder (Scriven
and Meloan, 1986).
A knowledge of insect behaviour is
imperative if insecticide targeting is to be
improved (Fluckiger, 1989; Adams and
Hall, 1990). This knowledge combined
with optimal placement, density and
droplet size of insecticides provides a
means by which more effective transfer can
be achieved (Adams and Hall, 1989). An
understanding of these interactions can
then be used to determine the most effec-
tive formulations and to modify spray char-
acteristics and application procedures (Fig.
4.11). This approach is likely to gain favour
over empirical observation made during
eld trials as new techniques lead to a bet-
ter understanding of processes underlying
the eld performance of insecticides (Ford
and Salt, 1987).
4.6 Application Equipment
A detailed description of the equipment
used for the application of insecticides is
beyond the scope of this book (see
Matthews, 1992) but because spray pat-
terns, droplet size distribution and volume
applied are inuenced by the type of
equipment used, a brief outline of the sub-
ject is required.
The application of insecticides is still
dominated by techniques initiated over a
century ago, that is, as water based sprays
applied through hydraulic nozzles
(Matthews, 1997a). These sprayers force
the liquid insecticide and dilutent, under
pressure, through a small aperture nozzle
producing a sheet of liquid that becomes
unstable, breaking into droplets having
a wide range of sizes and volumes. The
Insecticides 99
Fig. 4.11. An approach to the development of effective insecticide application procedures based on the
properties of insecticide deposits.
Chapter.4 10/7/00 11:36 am Page 99
volume of the largest droplets can be up to
one million times larger than the smallest.
Herein lie the disadvantages of hydraulic
nozzles. The high proportion of small
droplets produced (<100 m; Fig. 4.12) are
prone to drift and evaporation while most
of the spray volume is taken up with a few
large droplets that tend to bounce or run
off the foliage (Matthews, 1985). In arable
farming hydraulic nozzles are mounted as
a series along a boom which is typically
held 50 cm above the ground. In tree and
other crops the nozzles are usually
mounted in an air stream to project the
spray droplets into the crop canopy. Air
assisted application is particularly useful
in glass houses and stores where very small
droplets of < 50 m diameter are required.
Droplets of this size produce fogs which
readily penetrate through air to cover sur-
faces, foliage and stored produce. Use of
such small droplet sizes lends itself to rates
of insecticide application that are classied
as ultra low volume.
Ultra low volume (ULV) application
rates became possible through develop-
ment of equipment that permitted con-
trolled droplet application, i.e. the
application of a very narrow range of
droplet sizes. The accurate control of
droplet size and ow rate was made possi-
ble with the development of spinning disc
or cup sprayers. These sprayers make use
of the centrifugal energy of a spinning disc
100 Chapter 4
Fig. 4.12. The percentage of the total number of droplets of different diameters produced by a hydraulic
nozzle (histogram) and by a centrifugal energy nozzle with a ow rate of 2.0 ml s
1
() and 55 ml s
1
( ) (after Dombrowski and Lloyd, 1974; Matthews, 1979).
Chapter.4 10/7/00 11:36 am Page 100
which produces uniform sized droplets at
the edge of the disc. The range of droplet
sizes can be varied by the speed of the disc
and the ow rate (Fig. 4.12).
A relatively novel form of application
involving the electrostatic charging of
droplets was developed during the 1980s.
The electrodynamic sprayers have no mov-
ing parts, they charge the spray as it passes
through the nozzle so that the droplets are
then deposited on the nearest earthed
object, i.e. the crop. Although an excellent
idea, in practice the penetration of the crop
by droplets was often inadequate to control
some pests. Electrostatic charging can be
applied to spinning disc and hydraulic
nozzles but to date the only commercially
successful applicator is a hand held
sprayer which is used for spraying cotton
in a number of countries in Africa.
Developments to spray equipment in the
next few years will be mainly in relation to
improved use of existing equipment
(Matthews, 1997a). The development of a
commercially viable large scale sprayer
based on electrostatic charging of droplets
would revolutionize insecticide spray
equipment, but in the absence of this,
efforts will concentrate on better nozzle
selection, modications to improve opera-
tor safety and ease of use and reducing
wastage of insecticide.
4.7 The Farmer/User Requirements
The decision to adopt insecticide applica-
tion as a method of insect pest control will
not only depend on the type and level of
pest infestation but also on a number of
other factors which relate to the potential
user. Although individual circumstances
will differ and the relative importance of
each factor will vary, every user will have
in common the need for insect control that
is easy to use, is safe and economically
viable (Fig. 4.13).
4.7.1 Ease of use
The extent to which insecticides have been
used in the past tends to lend credence to
their effectiveness and to some extent their
ease of use, since one would not expect a
technique that was ineffective or too dif-
cult to use to gain its present level of
acceptance. However, there are still obvi-
ous practical problems with insecticide
use, such as the hazard during mixing and
application and hence the need for protec-
tive clothing, difculties in sprayer calibra-
tion, the necessity for appropriate weather
conditions, practical thresholds for timing
applications and disposal of used contain-
ers (Fig. 4.13).
Practical problems associated with
insecticide application include the time
and difculty associated with transporting
and moving large volumes of water. A large
proportion of the time used applying an
insecticide can be spent lling a tractor
mounted sprayer (ADAS, 1976; Matthews,
1984), a fully loaded knapsack sprayer can
weigh 21.5 kg (Pawar, 1986) and it can take
up to three to four man days to spray a 1 ha
eld (Matthews, 1983). The effort required
to carry the full sprayer, to rell it (this
may be needed over 30 times to spray 1
ha), the continuous pumping required (if
the sprayer is a hydraulic energy sprayer)
is certainly sufcient to discourage many
farmers from using insecticides, especially
in a hot climate. Some of these problems
have been overcome with the introduction
of ULV sprayers, which as the name sug-
gests, use less water than high volume
sprayers and hence do not have to be
relled as often. The hand carried versions
are light (4 kg; Pawar, 1986) and require
less manual effort for application because
they are battery powered.
Application equipment needs to be reli-
able and simple in design so that it
requires little maintenance. This simplicity
and ease of maintenance has been one of
the main advantages of hydraulic knapsack
sprayers in developing countries. A further
concern for a user is the calibration of the
spraying equipment and calculation of
application rates. If an insecticide is to be
applied at the recommended dose then the
user must know the rate at which the
insecticide is delivered by the sprayer
Insecticides 101
Chapter.4 10/7/00 11:36 am Page 101
which in turn requires measures of vol-
ume, swath widths and walking speed to
be made (Spencer and Dent, 1991). The
user then has to calculate the amount of
insecticide needed for the total area to be
sprayed at the required dose, the number of
sprayer loads and the quantity of the insec-
ticide required for each load. Calculations
102 Chapter 4
Fig. 4.13. Abiotic factors governing the use of insecticides as a control option.
Chapter.4 10/7/00 11:36 am Page 102
such as this may seriously reduce the
chances of an appropriate dose being
applied (Dent and Spencer, 1993).
In addition, simple errors in application
can also have a signicant impact on
whether or not the required dose of insecti-
cide is actually applied. For instance, with
knapsack sprayers an operator needs to
practise walking at a constant speed whilst
pumping the hydraulic sprayer, the speed
at which he walks will inuence the cover-
age of the crop. For instance, with a swath
width of 1 m and a ow rate of 0.5 l min
1
,
then for a walking speed of 0.4 m s
1
the
application rate will be:
whereas if the walking speed is 1 m s
1
Even when a farmer has correctly cali-
brated the sprayer and determined the
appropriate amount of insecticide to apply,
unless the environmental conditions are
suitable, an application should not be
made (Table 4.4). Conditions under which
insecticides can be applied are referred to
as weather windows, times when: it is not
raining; crop leaves are not wet with dew;
the wind speed is appropriate; the plant is
not under moisture stress; temperatures are
below a certain maximum and sunlight is
not too intense (Smith, 1983). Hence,
despite their value as crop protection
agents insecticides, if applied correctly, are
not easy to use.
4.7.2 Safety
Chemical insecticides are inherently toxic
substances but they are only a hazard to
man if used inappropriately. In developed
countries, where users are aware of the
need for care and caution when dealing
with toxic substances, the hazard from pes-
ticides arises mainly from carelessness and
negligence. There is no reason to expect
that procedures recommended for the safe
handling of insecticides will be followed
any more conscientiously than those from
other sources of hazard (Barnes, 1976).
Provided users in a developed country are
aware that they are dealing with a toxic
chemical, have a knowledge of the correct
procedures and proper protective clothing
readily available, then they are totally
responsible for their own safety. Accidents
occur because users become complacent.
The situation is totally different in
developing countries, however, where peo-
ple may be unused to handling and using
toxic chemicals. In some developing coun-
tries the use of pesticides may be a commu-
nitys rst contact with toxic chemicals
(Barnes, 1976), and they will view the
0 5
0
0 0083 10 000
83 4 4
1
1
1
.
. ,
( . )
l min
1 m 6 m min
l m
l ha
2
=
=
0 5
0 21 10 000
200 4 3
1
1
1
.
. ,
( . )
l min
l m 24 m min
l m
l ha
2
=
=
Insecticides 103
Table 4.4. Conditions under which pesticides
should not be applied (from Smith, 1983).
When it is raining
When leaf is wet with dew
When plant is dry; under moisture stress
Under windy conditions
When temperature is over 18C
When temperature is below 10C
In intense sunlight
When mixed with non-compatible materials
On open blossom
To resistant pathogens or pests
To plants to be consumed within 14 days
To untested varieties
To uncleared minor crops
When water supply is hard
Without adding cationic or non-ionic wetter
Before reading instructions on can
After material has been exposed to frost
To rapid growing lush foliage
If unable to convert pints per acre to litres per hectare
If unable to calibrate sprayer
If unable to identify the target
When ground is too wet to carry machine
When unsure of effectiveness of material
If you have no eld experience
When customers are looking
If unable to afford cost
Chapter.4 10/7/00 11:36 am Page 103
problems of hazard and toxicity from a
totally different perspective. The safe use
of insecticides under these circumstances
can only be achieved through education
and training. The difculty is exacerbated
because non-users such as family members
will inevitably come into contact with
insecticide deposits as they wash clothes,
prepare food or re-use discarded insecti-
cide containers. Even illness caused by
insecticide poisoning may not be diag-
nosed as such or associated with their use
by an unsuspecting community doctor.
The level of hazard associated with dif-
ferent insecticides varies markedly. The
World Health Organisation classies chem-
icals in terms of hazard according to acute
oral and dermal toxicity data for solid and
liquid formulations. Thus, good quality
granular materials are less hazardous than
sprays of the same chemical (Matthews,
1992). The classication in four categories:
Ia, Extremely Hazardous, e.g. phorate; Ib,
Highly Hazardous, e.g. endosulfan; II,
Moderately Hazardous, e.g. deltamethrin;
and III, Slightly Hazardous, e.g. malathion,
provides a guide to the care that should be
taken in dealing with the chemical and the
need for a type of protective clothing that
should be worn.
For most insecticides it is advisable to
wear rubber gloves, overalls, face mask and
boots. However, in tropical conditions
heavy protective clothing becomes unbear-
able with high temperatures and humidi-
ties. Often no protective clothing is worn
(Srivastava, 1974) either because it is not
available or it is too expensive for farmers
to purchase. At least a light overall or nor-
mal clothes should be worn. Many farmers
normally walk barefoot, which could seri-
ously increase their exposure to the insecti-
cide; shoes or boots must be worn. A
handkerchief tied over the face can be used
as a face mask. All clothes used for insecti-
cide application should be washed with
soap and detergent after completion of use
of the insecticide (Matthews and Clayphon,
1973). Operators should under no circum-
stances apply insecticides without clothes
covering the legs, torso and arms. However,
in reality, this can often occur, thus expos-
ing the spray operator to contamination.
The greatest risk to the user comes from
dispensing and mixing the chemical con-
centrates with the dilutent in the spray
tank. A number of solutions have been
developed to reduce the operator exposure
during mixing. Low level mixing units
eliminate the need to climb on a tractor
mounted sprayer tank to pour insecticide
into the tank; closed chemical transfer sys-
tems (CCTS) couples the pesticide con-
tainer directly to the sprayer or mixing
unit, and injection systems mix water with
the pesticide concentrate as it is applied
(Matthews, 1997a). The agrochemical com-
panies have also agreed to standardize con-
tainer apertures, which is promoting the
development of CCTS.
Other problems with safety aspects
of insecticide use concern packaging,
labelling and disposal of insecticides and
containers. In developing countries adul-
teration of insecticides can and does take
place at repackaging and distribution cen-
tres. In Manilas rice bowl 70% of pesti-
cide bottles at local retailers were found to
contain chemicals adulterated to more
than twice the acceptable standard of devi-
ation (Goodell, 1984). Regulations govern-
ing the packaging of insecticides need to
be closely controlled, but while monitor-
ing tests for adulteration remain expensive
and difcult to carry out this is unlikely to
happen, and the dangers from use of such
insecticides remain. Labelling of packages
needs to be in the local vernacular, using
symbols and diagrams meaningful to the
user. The label should include the brand
name, details of the active ingredient and
materials used in the formulation,
intended use of the product, full direc-
tions for correct and safe use and how to
dispose of the container (Matthews and
Clayphon, 1973; Matthews, 1992).
The usual recommendation for the dis-
posal of insecticides is to puncture the con-
tainer and to bury it, preferably in clay
soils at a depth of at least 1.5 m (Matthews
and Clayphon, 1973). In the tropics dis-
posal of containers in this way is unlikely
104 Chapter 4
Chapter.4 10/7/00 11:36 am Page 104
to occur since the farmer is being asked to
dig a pit 1.5 m deep to rid himself of a con-
tainer that has so many potential and valu-
able uses to him. The disposal of
insecticide containers is something that
needs serious re-evaluation; perhaps the
container needs to be changed to a type
that has no intrinsic value after use.
Insecticides 105
Case Study: Assessing and quantifying ease of use (ICRISAT, 1989)
The development of a twin spinning disc knapsack sprayer (ICRISAT, 1989)
included an assessment of its ease of use, its effectiveness compared with a con-
ventional knapsack sprayer and a comparison with a hand held single disc
sprayer of spray droplet distribution on the operator. The swath produced by the
twin disc sprayer was 3 m wide, required 15 l of water and about 1.5 man hours
to cover 1 ha. A knapsack sprayer needed more than 400 l of water and 200 man
hours to spray the same area. Although the twin spinning disc sprayer required
less water and less time than the conventional knapsack sprayer to spray 1 ha,
the level of control achieved for the leaf miner Aproaerema modicella, the thrips
Frankliniella schultzei and Scirtothrips dorsalis and the jassid Empoasca kerri
on groundnut were equivalent (Table 4.5).
When the twin spinning disc sprayer was compared with the conventional
hand held single disc sprayer to assess the risk to the operator, there was no sig-
nicant difference in droplet deposition on the feet, legs and waist of the operator
(Table 4.6). However, because the twin spinning disc sprayer has double the work
rate, the operator exposure time would only be half that of the single spinning
disc sprayer, although the legs of the operator receive a relatively high proportion
of the spray droplets when using the twin spinning disc sprayer (Table 4.6). One
solution to this problem was to suspend a sheet of polythene from the sprayer to
reduce deposition on the operators legs.
Table 4.5. The number of insects per groundnut plant 36 hours after insecticide application using
two types of spraying equipment (from ICRISAT, 1989).
Post-rainy season Rainy season
Sprayer type Leaf miner Thrips Leaf miner Thrips Jassids
Conventional knapsack
sprayer 0.63 2.00 12.4 0.10 0.02
Twin spinning disc
sprayer 0.25 1.72 14.0 0.24 0.02
Control (no spray) 2.48 4.57 43.2 4.20 0.40
Table 4.6. The deposit of spray (crops cm
2
) on the feet, legs and waist of an operator spraying
groundnut. The amount of chemical solution falling on to an operator spraying groundnut was
measured when the wind direction was at 30 or more across the operators direction of travel
and wind speed was less than 10 km h
1
(from ICRISAT, 1989).
Type of spinning
Drops cm
2
FA (%)
disc sprayer Feet Legs Waist Total Feet Legs Waist Total
Single 1.13 0.34 0.10 1.57 16.4 6.4 5.6 28.4
Twin 0.50 0.84 0.04 1.18 11.8 21.2 6.0 31.4
Mean 0.81 0.59 0.07 14.1 13.8 5.8
FA = area exposed to the chemical as a function of the area of sample paper used for measurement.
Chapter.4 10/7/00 11:36 am Page 105
4.7.3 Economic viability
Insecticides are without doubt an effective
means of killing insects, quickly and on
demand. No other control method provides
users with an immediate and visibly effec-
tive means of response to signs of impend-
ing pest outbreaks. This ability has meant
that risk-averse farmers spray at the rst
signs of insect pests, whether the numbers
observed are indicative of a serious out-
break or not, and some may even spray
insecticides regardless of the possible need
as an insurance against a perceived risk.
Obviously, there is a cost associated with
application of an insecticide. The insecti-
cide itself tends to be inexpensive relative
to the value of the crop; for instance in the
UK, in apples pesticide costs 747 ha
1
,
8.3% of total income (Webster and Bowles,
1996); in eld beans purchase of Pirimicarb
to control black bean aphid costs 12.50
ha
1
providing a yield benet of 3.5% on a
crop yielding 5 t ha
1
(Parker and Biddle,
1998). Pesticide application costs are esti-
mated to be around 10.00 ha
1
(Anon,
1993; Oakley et al., 1998) although the
operating costs of the application equip-
ment used will differ (Table 4.7).
In general, the use of pesticides is prof-
itable (e.g. Oakley et al., 1998) or their use is
perceived to be protable through reducing
the risk of damage to a crop. Farmers may
use pesticides to reduce the risk of pest
attack without establishing whether or not
control is justied economically. Such pro-
phylactic approaches to control usually
106 Chapter 4
Table 4.7. Operational costs with knapsack and hand-carried CDA sprayers I and II (actual costs of
equipment and labour will depend on local conditions; the cost of the chemical, which is also affected by
the choice of formulation, is not included) (from Matthews, 1992).
Manually Motorized
operated knapsack Hand-carried sprayer
knapsack mistblower I II
Initial capital cost () 60 350 45 45
Area sprayed annually (ha) 20 20 20 20
Tank capacity (litres) 15 10 1 1
Swath width (m) 1 3 1 3
Life in years 3 5 3 3
Hectares h
1
spraying
*
0.36 1.08 0.36 1.08
Overall ha h
1
(% efciency)
*
0.18 (50) 0.65 (60) 0.31 (85) 0.97 (90)
Use (h annum
1
) 111 30.8 64.5 20.6
Annual cost of ownership () 20 70 15 15
Repairs and maintenance
() 6 35 4.5 4.5
15% interest on half capital () 4.5 26.3 3.4 3.4
Total cost of ownership () 30.5 131.3 22.9 22.9
Ownership cost per hour () 0.27 4.26 0.36 1.11
Ownership cost per hectare () 0.76 3.95 0.99 1.03
Labour costs per hectare
o
w
e
r
C
h
i
n
e
s
e
c
a
b
b
a
g
e
M
a
n
g
e
l
R
a
s
p
b
e
r
r
y
S
t
r
a
w
b
e
r
r
y
B
e
e
t
C
a
r
r
o
t
C
o
l
l
a
r
d
M
u
s
k
m
e
l
o
n
R
h
u
b
a
r
b
S
u
n
o
w
e
r
B
l
a
c
k
b
e
r
r
y
C
a
s
t
o
r
b
e
a
n
C
u
c
u
m
b
e
r
O
n
i
o
n
R
u
t
a
b
a
g
a
S
w
e
e
t
p
o
t
a
t
o
B
r
o
c
c
o
l
i
C
e
l
e
r
y
H
e
m
p
P
a
r
s
l
e
y
S
a
f
o
w
e
r
T
u
r
n
i
p
B
r
u
s
s
e
l
s
s
p
r
o
u
t
s
C
h
a
r
d
K
a
l
e
P
u
m
p
k
i
n
S
p
i
n
a
c
h
W
a
t
e
r
m
e
l
o
n
*
F
r
e
q
u
e
n
t
l
y
m
o
r
e
t
h
a
n
1
0
%
o
u
t
c
r
o
s
s
e
d
.
chapter.5 14/7/00 2:08 pm Page 140
especially if the owers are small, but it
does permit cross-fertilization to be con-
trolled. Pollen from the required male par-
ent can be introduced to the stigma of the
female emasculated parent. However,
emasculation is inappropriate for prevent-
ing self-pollination of large numbers of
plants. In situations where outbreeding
needs to be promoted then male gameti-
cides need to be used to make inbreeders
male-sterile. Other methods include
genetic or cytoplasmic male sterility but
gameticides have, to date, been mainly
used to facilitate hybrid seed production;
they have great potential for use in promot-
ing outbreeding in population enhance-
ment approaches.
Asexual reproduction is another means
by which plants may be propagated and
utilized in agriculture. The vegetative
propagation of plants can take place by use
of rhizomes, stolons, tubers, bulbs and
corms or by budding and grafting tech-
niques. Plants that are vegetatively propa-
gated in agriculture include a diverse range
of crops from potato, sweet potato, sugar
cane, cassava, grapes, Rubus spp., straw-
berries to tree fruits and nut bearing trees.
Where sexual reproduction does occur the
plants are natural outbreeders and are
highly heterozygous.
5.4.2 Inbred pure lines
The objective of an inbred scheme is to pro-
duce a highly uniform plant population
having the desired characteristics that con-
stitute an improved crop plant, for instance,
high yield, drought tolerance or pest resis-
tance. Pure lines are produced by contin-
ued selng over a number of generations
until they are genetically homozygous. Self-
fertilization reduces heterozygosity accord-
ing to classical Mendelian inheritance. A
heterozygote Aa having a dominant A gene
and a recessive a gene will if self-fertilized
segregate in three genotypes, AA, Aa and aa
in the ratio of 1:2:1 plants. If these geno-
types are then self-fertilized, the AA and aa
genotypes will breed true to type while the
Aa will provide the same ratios as before,
1:2:1. In this way the heterozygosity is
reduced by half every generation and hence
homozygosity is achieved within a few gen-
erations for a single gene pair and within a
greater number of generations for an
increasing number of gene pairs (Fig. 5.8).
Once these pure lines have been achieved,
then crosses are made between them to pro-
duce a new variable generation, but these
plants are self-fertilized to produce nearly
pure lines again, among which will be
those lines having favourable characteris-
tics as a result of the cross. These lines are
then selected for further evaluation.
The three basic breeding schemes for
inbred lines are pedigree breeding, bulk
breeding and breeding through single seed
descent. The choice of which scheme to
use depends on the timing of intensive
selection within the programme. Early gen-
erations are heterogeneous and hence only
selection for highly heritable characters
would be efcient. Later generations are
more homogeneous and hence selection for
plants having favourable characteristics is
a choice between xed lines (Table 5.3).
Pedigree breeding is a scheme that uses
selection of single plants during early gen-
erations despite the high degree of het-
erozygosity amongst the plants at this stage
Host Plant Resistance 141
Fig. 5.8. The percentage of homozygous individuals
after up to 12 generations of self-fertilization, when
the number of independently inherited gene pairs is
1, 5, 10, 20, 40 or 100. The percentage of
homozygosity in any selfed generation is given by
the curve for one gene pair (after Allard, 1960).
chapter.5 14/7/00 2:08 pm Page 141
in the procedure. The plants are then self-
fertilized and the seeds from each plant are
used to produce family rows which in later
generations are replaced by selection
between family plots. In about the fourth
generation the genetic differences between
families are much greater than within fami-
lies, hence it is at this time that the number
of families can be reduced. The term pedi-
gree breeding is derived from the use of
records of lineage which permit selection
among closely related families selected in
the F
3
generation. Where there is little to
choose between families, a single line is
chosen to continue the lineage representa-
tive of a particular plant type. Numerous
insect resistant varieties of various crops
have been developed through the pedigree
method (Panda and Khush, 1995). Johnson
and Teetes (1980) describe the use of the
pedigree method for breeding resistance to
the sorghum midge (Contarinia sorghicola)
in the following steps:
1. The highest level of resistance should
be transferred to agronomically acceptable
types by hybridization and selection.
2. Agronomically acceptable lines with
the least susceptibility to midge should be
used as the non-resistant parent.
3. Grow a large F
2
population of at least
4000 plants. Selection can be accom-
plished up to this stage without midge
being present. Selection for small-plumed
types should increase the frequency of
midge resistant types from the F
2
popula-
tion.
4. Evaluate F
3
rows under midge infesta-
tion. To ensure a large midge infestation
during the owering stage, the F
3
should be
planted at more than one date or location.
5. Evaluate F
4
selections in replicated
progeny rows and backcross superior
plants if necessary.
Pedigree breeding has also been used
for resistance breeding against shooty
(Atherigona soccata) and greenbug
(Schizaphis graminum) in sorghum
(Johnson and Teetes, 1980; Teetes, 1980)
142 Chapter 5
Table 5.3. The different breeding schemes for inbred crops (after Simmonds, 1979).
Pedigree Bulk Single-seed descent
F
2
Maximal variability, high heterozygosity, heterosis persists
Spaced planting: single parent F
2
bulk Single seed taken from each plant
selection (SPS) of large sample
F
3
F
6
Declining heterozygosity and heterosis; lines assume individually
Family-rows progressively Bulks, with or without Single seed descent;
replaced by plots and family some articial selection two glasshouse generations per year
selection; near-relatives
eliminated; quality tests
and yield trials started
Large sample of near-homozygous lines isolated and selected
F
5
F
8
Surviving lines effectively homozygous; variability greatly reduced
Final family selection; detailed Selection and yield and quality
yield and quality evaluation; evaluation completed;
purication started purication started
F
7
F
12
Only onefew genotypes survive, as pure lines
Further trials in diverse locations
and seasons; pure stocks multiplied;
naming and release
chapter.5 14/7/00 2:08 pm Page 142
and in rice against the green leafhopper
(Nephotettix virescens) and the brown
planthopper (Nilaparvata lugens; Khush,
1980). Modications of the pedigree
method and bulk breeding methods are
used for breeding for resistance in cotton
(Niles, 1980) and groundnut (Smith,
1980).
Bulk breeding involves leaving the
selection for useful plants until the
homozygosity is well advanced and if any
selection is practised then it is only for
highly heritable characteristics. The
method is used for seed crops but is totally
unsuited for fruit and most vegetable crops
(Allard, 1960). The method has the advan-
tage of reducing labour costs during the
early stages of the scheme because it relies
on natural selection for the elimination of
undesirable genotypes and the changing of
gene frequencies in the population. The
bulking of seed increases the crop homozy-
gosity before single plant selections are
made and evaluated in the same way as for
pedigree breeding. In general, most inbred
line populations are handled by one of the
bulk methods (Simmonds, 1979).
Single seed descent as a method of
breeding that involves leaving the selection
procedure as late as possible in the breed-
ing programme. Single seeds are taken
from each plant of a large sample. The
seeds are sown in greenhouses with the
object of getting through as many early gen-
erations (and hence the more heteroge-
neous generations) as quickly as possible.
When homozygosity is achieved, plants are
then selected for favourable characteristics
and use in eld trials. A single seed
descent programme was used to develop
inbreds with resistance to carrot y (Ellis et
al., 1991).
5.4.3 Open-pollinated populations
Outbreeders naturally maintain a high
degree of heterozygosity by cross-pollina-
tion and many suffer from loss of vigour if
self-fertilization is enforced over a few
generations. The breeding for improved
open-pollinated crops is dependent on
changing the gene frequencies of popula-
tions of plants in favour of useful charac-
teristics, thus maintaining a high degree
of heterozygosity, to prevent inbreeding
depression. The gene frequency of a popu-
lation is changed by selection of a large
number of plants having the required
characteristics over many generations so
that the mean value of each characteristic
shifts away from the original population
(Fig. 5.9). Hence, in population breeding,
crop characteristics are referred to in sta-
tistical terms, of means and variances,
since the uniformity of inbred crops is
Host Plant Resistance 143
Fig. 5.9. The changing frequency distribution of percentage oil content in corn after selection over up to 10
generations. The numbers above each distribution denote the generation (after Allard, 1960 from Smith,
1980).
chapter.5 14/7/00 2:08 pm Page 143
impossible for the heterogeneous out-
breeders (Simmonds, 1979).
There are two types of open-pollinated
populations used in plant breeding: the
rst is an isolated population indenitely
randomly mated within itself and the sec-
ond is the synthetic population, which is
an articial population produced through
combining randomly mated inbred lines
(only appropriate for plants that can with-
stand a degree of inbreeding). The former,
which is referred to as the population
improvement technique, involves mass
selection of superior plants, or some varia-
tion on this.
Mass selection is a simple selection pro-
cedure, requiring a low labour input and
only one cycle of selection per generation.
Desirable plants are selected from a large
freely interbreeding source population. The
seed is harvested, mixed and used as the
next generation. No control is exerted over
pollination; only the maternal parent is
known, which means any heritability is
halved. Mass selection is based on the
choice of superior phenotypes or on char-
acters that can be easily seen or measured
and increasing the proportion of these
within the population. Characters such as
yield, oil and protein content in maize
have been selected for (Lawrence, 1968;
Woodworth et al., 1952; Fig. 5.10) as well
as more easily identiable characters such
as plant height, maturity date and grain
colour. Mass selection, more than any other
plant breeding method, has been responsi-
ble for the improvement of open-pollinated
crop varieties over many centuries.
Farmers practised mass selection when
choosing the plants for the seed that would
be used for the next years crop, and in
doing so produced many locally adapted
varieties. Mass selection has been used to
improve varieties of sugar beet, maize and
alfalfa and remains the most common form
of population improvement.
The progeny testing and line breeding
techniques are simple variations of the
basic mass selection procedure. Progeny
testing attempts to obtain a more accurate
evaluation of the breeding potential of an
individual by assessing some of it progeny.
144 Chapter 5
Fig. 5.10. The effect of 50 generations of selection for high or low oil content in corn (after Woodworth et
al., 1952).
chapter.5 14/7/00 2:08 pm Page 144
Progeny testing is important because it is
not always possible to determine whether
an individuals superiority is due to the
environment or improved genotype. A
small amount of seed is taken from the
maternal parent and sown in rows or plots.
The choice of parental plants that will be
used to produce the next generations is
then based on the performance of their
progeny and not their own phenotypic
appearance (Allard, 1960). However, the
value of progeny testing is only to improve
the selection of superior phenotypes; it has
no intrinsic value since the seed from the
progeny plots is not used in the breeding
programme. Finally, with line breeding the
progeny lines are combined to form a com-
posite, and provided there is a large enough
number of lines that are not too closely
related, the inbreeding can be prevented.
Line breeding is an important method used
for maintaining a high level of resistance to
pathogens (Lawrence, 1968).
The second type of population used in
the breeding of open-pollinated popula-
tions is the synthetic population. The syn-
thetic population consists of a number of
plant genotypes that have been shown to
combine favourably in all possible combi-
nations with each other to produce agro-
nomically valuable genotypes. The
synthetic population involves testing the
performance of progeny and it differs from
line breeding because the latter is based
only on composites of individually tested
lines. Synthetic varieties have been pro-
duced in maize and forage crops.
Before leaving open-pollinated popula-
tions with their inherent need to maintain
a high degree of heterozygosity in the nal
selection, there exists one other form of
selection that should be considered, recur-
rent selection. Recurrent selection was
developed by maize breeders with the ulti-
mate objective of improving inbreds for
hybrid production. The development of
hybrids is considered in the next section
but recurrent selection, which is essen-
tially a method of population improve-
ment, can be considered independently.
Recurrent selection combines the advan-
tages of line breeding and progeny testing
with a limited amount of control over pol-
lination. There are a number of different
selection procedures, but the simplest
involves selng of superior plants and
crossing their progenies in all combina-
tions to provide seed for repeat cycles of
selection and crossing. The more complex
form of recurrent selection is the reciprocal
recurrent selection procedure (Fig. 5.11)
which is designed to improve two popula-
tions simultaneously with respect to their
performance and to their mutual combin-
ing ability (Simmonds, 1979).
The recurrent selection techniques used
in alfalfa breeding have been described by
Nielson and Lehman (1980). Line selec-
tions are also used in breeding for alfalfa
resistance but as a method it is less prefer-
ential to individual plant selections
because there is less control of pollen
sources. The individual plant selections
involve an initial screening population of
between 1000 and 10,000 plants, usually
from a cross variety or plant introduction.
Selection cycles are made where resistant
material is selected, grown and seed
resown each cycle. At each cycle the num-
ber of plants is gradually reduced until a
desired number of superior plants remains.
Progeny tests may then be used. For recur-
rent selection the number of selected
plants or lines in each cycle should be at
least 25 to 100 to ensure that the frequency
of detrimental characters is maintained at a
level no higher than in the original popula-
tion. Selected plants/lines from one cycle
are interpollinated and seed are produced
for another cycle where selection is made
for the same characters. Recurrent selection
is used to breed alfalfa with multiple resis-
tance (Hanson et al., 1972) and has been
used to develop maize with resistance to
Spodoptera frugiperda (Widstrom et al.,
1992).
5.4.4 Hybrids
Hybrids are produced by crossing various
inbred lines, usually those of outbreeders,
and are considered important because
some hybrids can produce outstanding
Host Plant Resistance 145
chapter.5 14/7/00 2:08 pm Page 145
yields, greatly exceeding those of the par-
ents. The greatest drawback with develop-
ing hybrids has been the selection of the
inbred lines that when crossed will pro-
duce a valuable hybrid. If two unrelated
inbred lines are crossed, then, in general,
the resulting hybrid will show some
increased vigour relative to the parents, but
out of the thousands tested too few hybrids
have been produced that are economically
valuable. It is the production of outstand-
ing hybrids that is always sought but such
crosses are relatively rare, to the extent that
approximately 70% of US maize in 1979
was considered to be based on as few as six
inbreds (Simmonds, 1979). Despite the
146 Chapter 5
Fig. 5.11. A diagrammatic representation of a breeding scheme of reciprocal recurrent selection (after
Simmonds, 1979).
chapter.5 14/7/00 2:08 pm Page 146
great deal of work carried out in hybrid
maize breeding the genetic mechanisms are
not altogether clear. Inbreeding depression
is usually attributed to the xation of
unfavourable recessives, and heterosis,
essentially the opposite of this, has been
ascribed to one of two mechanisms, either
dominance or over-dominance of heterozy-
gotes. The over-dominance hypothesis
explains heterosis in terms of the superior-
ity of heterozygous genotypes relative to
homozygotes while the dominance hypoth-
esis is based on the superiority of domi-
nant alleles when the recessive alleles are
deleterious (Strickberger, 1976). However,
there is no clear cut evidence for one or
other of these hypotheses and the true
mechanisms await identication and clari-
cation.
In maize, hybrid production is basically
achieved in ve steps:
1. Selection from an open-pollinated pop-
ulation of plants having favourable charac-
teristics.
2. The selng of these plants over a few
generations to produce homozygous inbred
lines.
3. Selection among the inbred lines.
4. A top cross testing for assessing general
compatibility (normally referred to as
crosses exhibiting a good general combin-
ing ability). A top cross is a cross between
an inbred line and a common pollen parent
variety, called the top cross parent.
5. A pair-wise testing for hybrid vigour.
Hybrids have also been developed among
onions, sugar beet, Brussels sprouts, kale,
castor, tomatoes and cotton, although dra-
matic increases in yields are not attribut-
able to these hybrids. One of the driving
forces behind the search for and develop-
ment of hybrid crops lies in the economics
of seed production and sales. Although
hybrids may be expensive to develop they
have the economic advantage that the
grower cannot use harvested seed for the
next seasons crop, but must return to the
wholesaler to purchase the F
1
hybrid seed.
This commercial scheme seems to have
worked well in developed countries where
the necessary infrastructure exists to take
advantage of it. Such an approach in devel-
oping countries may be less appropriate,
especially since population improvement
techniques have shown equal potential and
are often less expensive.
5.4.5 Clones
Clones are groups of individuals that have
descended from a common parent by
mitotic division alone, meiosis has not
been involved. Hence, clones are geneti-
cally identical plants that have been vege-
tatively propagated from a single parent.
Vegetative propagation occurs naturally in
the form of asexual reproductive structures
such as stolons, rhizomes, tubers, bulbs
and corms or by well established horticul-
tural techniques such as budding, grafting,
leaf cuttings and leaess stem cuttings. A
wide variety of crops are produced as
clones including perennial vegetables,
potato and sweet potatoes, tree crops,
apples, peaches and rubber trees, shrubby
crops, bananas, sugar cane and pineapple,
soft fruits, strawberry, blackberry and rasp-
berry and certain species of grasses.
Breeding clones involves obtaining
crosses between the owering heterozy-
gous clonal parents and then selecting
among these F
1
individuals, and in subse-
quent vegetatively propagated clonal gener-
ations for individuals having favourable
characteristics. The most valuable feature
of clonal breeding is that favourable char-
acteristics produced in the F
1
progeny of
the sexual cross, are immediately xed
because subsequent multiplication is vege-
tative, producing only genetically identical
individuals. However, one of the major
problems with clonal breeding is that the
plants used usually have reduced fertility
thereby restricting the ease of the sexual
cross.
There are basically two types of clonal
crop: those that produce a vegetative prod-
uct and those producing a fruit. Crops
grown for their vegetative products can
suffer from various degrees of reduced
owering and fertility making sexual repro-
duction and selected crosses difcult. Wild
Host Plant Resistance 147
chapter.5 14/7/00 2:08 pm Page 147
potato species ower readily while many
potato cultivars either do not ower at all
in the eld, e.g. King Edwards, or their
ower buds fall off prematurely. Pollen
sterility is also a major drawback in
hybridization preventing many desirable
crosses (North, 1979). Although owering
is obviously not a problem among fruit pro-
ducing clones, pollen sterility does provide
a major drawback. Also a number of spe-
cial reproductive problems exist, e.g.
parthenocarpy in bananas, which have to
be overcome before cross breeding is possi-
ble. Further problems for the breeder are
encountered due to carry-over of virus dis-
eases in clones, lengthy generation times of
some perennial plants and a slow rate of
multiplication of some cultivars (North,
1979). These problems are, however, being
solved is some cases by the use of in vitro
techniques.
In vitro methods involve the cultivation
of plant tissues under sterile conditions in
the laboratory using various nutrient media
to promote growth and development.
Meristem cultures utilize meristem tips of
developing plants to rear virus free clonal
stocks and for the rapid multiplication of
some species having a slow rate of vegeta-
tive propagation. Embryo cultures, where
developing embryos are removed from the
young fruit and grown in articial media,
are used in situations where the embryo
normally fails to develop, such as in the
hybridization of related species. Cell and
tissue culture, the most recent advances in
in vitro methods, have provided some spe-
cic cases of potential uses in clonal multi-
plication, e.g. freesia, production of
haploids from pollen cultures and hence
homozygous diploids as an aid to inbreed-
ing lines e.g. tobacco, and in vitro
hybridization, e.g. soybean. The full poten-
tial of cell and tissue cultures is yet to be
fully realized, but they will denitely play
an important role in future developments
in genetic manipulation.
5.4.6 Backcross breeding
Backcross breeding is used when breeding
with inbred lines, open-pollinated popula-
tions and clones. It provides a method to
incorporate a desirable trait into an other-
wise acceptable variety of a crop plant
(Mayo, 1987). Backcross breeding transfers
a single or a few genes that have readily
identiable and desirable characters from a
donor plant (often poor in general agro-
nomic ability but having a useful trait such
as pest resistance) to a generally superior
variety lacking only the desired trait. The
superior variety is referred to as the recur-
rent parent and the ultimate value of the
new improved variety will be largely
dependent on the quality of this parent.
Hence, recurrent parents are usually estab-
lished varieties that have a proven ability
but lack a character that could potentially
make them of more value. The agricultural
value of the donor parent, for characters
other than the one under selection, is
unimportant but the trait to be transferred
must be highly heritable and the intensity
of its expression maintained throughout a
series of backcrosses. Hence, traits that are
used in backcrosses are usually controlled
by major genes. Disease resistance, plant
height and earliness are traits normally
considered suitable for incorporation by
backcross breeding (Mayo, 1987).
The general principle of backcrossing
can be illustrated by considering two geno-
types: aa the donor and AA the recurrent
parent. If these are crossed, the resulting
genotype is AA, Aa, aa. If this F
1
genera-
tion is then backcrossed with the recurrent
parent, the resulting genotype will be AA,
Aa, i.e. the donor parents contribution to
the progeny will be halved in each succes-
sive backcross. Eventually, the genetic con-
tribution of the donor parents becomes
insignicant except for the desired charac-
ter which is maintained during this reduc-
tion process by positive selection. The
number of backcrosses that is required is
dependent on the recovery of the essential
characters of the recurrent parent, or alter-
natively the redirection of the characters,
other than the selected character, associ-
ated with the donor parent. The recovery
of the recurrent parent will be enhanced
if in the early generations there is some
148 Chapter 5
chapter.5 14/7/00 2:08 pm Page 148
selection for parental type. The number of
generations required to achieve a suitable
level of recovery can be determined in a
similar way to the number of generations
required to achieve homozygosity through
selng. Figure 5.9 can be used to nd the
percentage of plants homozygous for a
given number of alleles entering the cross
from the recurrent parent. If no selection is
practised, then for parents differing in, for
example, ve gene pairs ve backcrosses
will produce a population in which
approximately 85% of the individuals will
be homozygous and identical with the
recurrent parent at all loci (Allard, 1960).
Backcross breeding in open-pollinated
crops differs only in the number of plants
that must be used as recurrent parents.
This number must be sufcient to ensure
the recurrent parents represent the gene
frequency characteristic of that particular
variety (Lawrence, 1968). The situation is
similar in clonal crops when dominant
genes are being transferred; more than one
recurrent parent is required to avoid
inbreeding, and enable the progeny to be
left heterozygous for the transferred gene.
5.4.7 Breeding for horizontal resistance
There are three possibilities to contend
with in breeding for resistance to insects.
The rst is that the insect may exhibit
gene-for-gene vertical resistance (although
probably rare among insects) and the
requirement for an appropriate breeding
scheme to incorporate the genes into high
yielding cultivars; backcrossing tech-
niques should be appropriate. The second
possibility concerns the identication of
resistance characters controlled by major
genes (preferably expressing characters
that are beyond the insects capacity for
change) and the introduction of these
genes into appropriate cultivars. The third
possibility involves the selection and
breeding for polygenically inherited resis-
tance characters.
Utilization of characters that are beyond
the insects capacity for change will pro-
vide durable resistance in crops plants and
although such characters are often con-
trolled by major genes, the resistance is
horizontal. Such major gene characters are
amenable to traditional methods of breed-
ing and can be readily incorporated into
high yielding cultivars, but unlike vertical
resistant characters, the resistance will be
durable. In the short term the continued
research effort for this durable major gene
resistance is inevitable because at present it
ts in with traditional methods of breeding.
The basic difference between breeding
for horizontal resistance and the more tra-
ditional breeding techniques is that with
the former outcrossing among individuals
is actively encouraged while, in the more
conventional approaches, inbreeding is
considered the most useful form of fertil-
ization. For horizontal resistance breeding,
crops that are normally self-pollinating
will have to be prevented from self-fertil-
ization. The use of male gametecide sprays
is one possibility, e.g. MS
3
for sorghum
(Johnson and Teetes, 1980), although the
frequent use of these will encourage resis-
tant plant strains that do not respond to the
spray treatment. The more conventional
alternatives for preventing cross-pollina-
tion are plant nuclear and cytoplasmic
sterility. Nuclear male sterility is con-
trolled by male chromosomal genes that are
usually recessive, e.g. MsMS and Msms are
male fertile and msms are male sterile.
Cytoplasmic sterility is maternally inher-
ited, i.e. a sterile female crossed with a fer-
tile male produces sterile progeny (Mayo,
1987). Male sterility facilitated recurrent
selection has been successfully used to
develop resistance to stem borers in rice
(Chaudhary and Khush, 1990).
The general method for breeding for
horizontal resistance is one of mass selec-
tion from a large random polycross. Plant
populations must consist of thousands of
individuals but need not cover an area
greater than a few hectares if, for instance,
cereals such as rice or wheat are being
grown. Agronomically unsuitable and sus-
ceptible plants must be removed before
owering and selections should be based
on assessments or measures of the relative
amount of resistance or conversely the
Host Plant Resistance 149
chapter.5 14/7/00 2:08 pm Page 149
degree of susceptibility encountered.
Horizontal resistance will have accumu-
lated to useful levels after 1015 genera-
tions which could mean only 57 year
cycles with two cropping seasons per year.
Screening methods can then be devised
to select plants according to their relative
value measured in terms of numbers of
insects present, their rate of development
or growth, their fecundity and survival or
the amount and type of damage they cause.
Rarely are absolute measures of the above
variables made; usually a scale or index
scoring system is devised and a visual
assessment of the variables translated into
a relative estimate. Such visual assess-
ments and scoring systems do not provide
a very accurate evaluation of resistance but
in most breeding situations large numbers
of plants have to be screened quite rapidly,
so other techniques are often too laborious
and time consuming. Screening under con-
trolled conditions in the laboratory may
identify polygenically inherited resistance
more readily than in the eld. Among labo-
ratory populations of organisms, selection
occurs from among a relatively low number
of individuals and because the distribution
of phenotypes will be limited, the selection
will tend to make use of existing common
variation rather than drawing on novel
variation from rare phenotypes (Roush and
McKenzie, 1987). The application of insec-
ticides to insects in the laboratory, where
dosage and mortality can be precisely con-
trolled, has resulted in the accumulation of
polygenically inherited resistance to the
insecticide by the small proportion of
insects that survived each generation
(Roush and McKenzie, 1987). Similar
selection pressure to that exerted by the
insecticide in the laboratory can be pro-
duced in host plant resistance studies with
closely controlled infestations of insects for
a given number of plants. The infestation
has to be just great enough to permit suf-
cient plant survivors for the next genera-
tion. The work of Barnes et al. (1969) on
laboratory screening of alfalfa for resistance
to the alfalfa weevil (Hypera postica) repre-
sents the type of methodology that would
select for polygenically inherited resis-
tance; the weevils were allowed to feed
until 95% of the plants were destroyed and
the 5% surviving plants were grown on for
further resistance evaluation. The surviv-
ing plants in the above experiment were
subjected to further tests and were shown
to support signicantly less adult feeding
and produce smaller larvae than unse-
lected plants of the same variety. The dif-
ferences between the selected and
unselected plants were small but this
would be consistent with selection of poly-
genes which would produce a small effect
each generation and would need to be
accumulated over several generations to
provide useful levels of resistance.
The majority of screening that is carried
out, however, is not in the laboratory but in
the eld, where conditions are more vari-
able and where screening and selection
techniques need to be simple and economi-
cal of time and effort.
The selections must only take place dur-
ing the esodemic if vertical resistance is
suspected. Where vertical resistance is not
present, the selection pressure (provided
by the level of pest infestation) should, ide-
ally, be both intense and uniform. Methods
for increasing the level of infestation
include planting susceptible varieties
around and within the breeding plot (but
not allowing them to ower) and the use of
articial infestations (inoculation from lab-
oratory mass reared insects). Ensuring that
regular severe infestations occur is impor-
tant for two reasons: a patchy distribution
of infestation will increase the likelihood
of escapes, and horizontal resistance will
be eroded in the absence of selection pres-
sure. Plants that escape infestation are
technically included as horizontally resis-
tant but the greater the number of escapes,
the slower the rate of accumulation of hori-
zontal resistance since escapes that are
selected may not contribute resistance
genes to the gene pool. To prevent this,
infestations need to be as uniform as possi-
ble over the breeding population.
In the same way that genes for resis-
tance can be gradually accumulated in the
150 Chapter 5
chapter.5 14/7/00 2:08 pm Page 150
presence of a positive selection pressure,
resistance can also be lost or eroded in the
absence of that pressure. The implication
of this is that in situations where pest
infestations are sporadic and highly vari-
able between seasons, horizontal resistance
will only accumulate at a slow or negligi-
ble rate unless the level of infestation is
articially maintained. The methods men-
tioned above are applicable. Susceptible
varieties can be sown early around the
block to encourage a quick establishment
and build-up of the insect populations
(Jackai, 1982). Infested plant material could
then be distributed within the breeding
block. As the infested plant sections wilt
and die the insects will move on to adja-
cent test plants (Lowe, 1973).
Breeding for horizontal resistance will
be easier in some crops than others. The
difculties with self-pollinating crops have
been mentioned above but these can be
overcome. The greatest problem with such
crops comes from the reticence of the
breeders to consider alternative breeding
techniques rather than with technical dif-
culties related to the methodology. Long
term perennial outbreeders are another
matter. Many of these crops are difcult to
breed because they occupy such large
areas, some have a very low level of seed
production, e.g. coconut, and long genera-
tion times, e.g. dates (710 years). Since
there is little likelihood of perennial plants
exhibiting vertical resistance to insects,
selection for horizontal resistance will be
possible within existing crops. In forest
trees, the selection for resistance may be
hampered by the problems of screening
such large plants. Where pests may be high
in the crown developing appropriate sam-
pling methodology will be difcult,
although most trees can be vegetatively
propagated by stem or root cuttings once
resistant individuals have been identied.
Recent advances in tissue culture methods
with conifers and deciduous trees may
stimulate vegetative production of insect
resistant trees (Hanover, 1980).
Also little use has been made of mass
selection for resistant phenotypes despite
its successful use for other quantitatively
inherited traits, including rust resistance.
Mass selection has been used to improve
crops of lobolly pine, Scots pine, black
wattle and eastern cottonwood (Wright,
1976). The characteristics used were
mostly related to growth and production
such as growth rate, tree height, number of
branches and diameter but work on slash
pine (Goddard et al., 1973) and eastern cot-
tonwood (Jokela, 1966) has shown that
mass selection techniques are also highly
effective at selecting for horizontal resis-
tance to rusts. Since the principles of
breeding for horizontal resistance to
pathogens apply equally well to insects,
mass selection for resistance to insects
in forest stands has a high potential for
success.
Host Plant Resistance 151
Case Study: Directed mass selection for leafhopper, alfalfa aphid and
diseases in alfalfa (Hanson et al., 1972)
Alfalfa is a forage crop that is susceptible to leafhopper yellowing caused by
Empoasca fabae and damage by the spotted alfalfa aphid, Therioaphis maculata,
as well as a range of diseases including rust, common leafspot, bacterial wilt and
anthracnose. Mass selection of two gene pools (A and B) was used to develop
multiple resistance to these pests over 18 generations (Fig. 5.12). At the time the
two pools were initiated, resistance to more than one disease or insect was infre-
quent in both exotic and domestic varieties of alfalfa. Pool A was initiated from
400 plants from four sources and pool B was established on 380 plants from nine
sources (cultivars or synthetics). In all cycles, with the exception of the rst
cycle of selection for resistance to the spotted alfalfa aphid, no less than 80
plants and sometimes as many as 500 plants were selected to be intercrossed
chapter.5 14/7/00 2:08 pm Page 151
The pools A and B responded similarly
to selection for resistance to potato leafhop-
per yellowing (Fig. 5.13) but pool A
responded more rapidly than pool B for
resistance to spotted alfalfa aphid. Hence,
the mass selection was an effective means
of developing resistance to each of these
pests, although yield decreased in the eld
during selection for spotted alfalfa aphid
(Fig. 5.14). During selection for resistance
to this aphid, a further exception was
vigour. Relaxation of the selection pressure
for plant vigour was thought to be the likely
cause of the much reduced yield, combined
with the effects of using a narrower genetic
base to initiate the cycle. The decrease in
yield in the nal generations of the cycle
was also thought to be due to this relax-
ation of selection for vigour during these
cycles which took place in the laboratory.
An unexpected bonus from the mass
selection was that pool B was found to
152 Chapter 5
within each pool to produce seed for a new cycle. In contrast to this, the rst
cycle used for the selection of resistance to the spotted alfalfa aphid used 20 and
eight plants respectively in pools A and B. During selection for resistance to this
aphid a further exception was made. In each of the other eld selections vigour
and general plant appearance were always used as selection criteria for pest
resistance, whereas with the spotted alfalfa aphid the reaction to the insect was
the only criterion used. Selection in the eld occurred in about half of the cycles
of selection for each pest, the rest were based in the laboratory. The results of the
selections for resistance to each pest were positive but only the results of the
insect pests are discussed here.
Fig. 5.12. Plan of recurrent phenotypic selection in germplasm pool A. A similar plan was used
for pool B except that four cycles of selection for bacterial wilt resistance followed A-C4 instead
of the two as in pool A (after Hanson et al., 1972).
chapter.5 14/7/00 2:08 pm Page 152
have a resistance to frost, probably as a
result of selection in the eld being made
after the rst frost of the season. In another
gene pool a similar unexpected character,
resistance to the pea aphid, was inadver-
tently selected for. The presence of these
improved but unselected characters no
doubt resulted from the selection of
healthy, vigorous plants over the selection
cycles and represents signicant popula-
tion improvement. The mass selection pro-
cedure has a great deal to recommend it as
a means of improving resistance to specic
pests and multiple pest resistances, as well
as more complex agronomic characters.
5.4.8 Breeding trials design
The basics of trials design for eld experi-
ments have been dealt with in Chapter 3.
Additional trial designs that are particu-
larly relevant to plant breeding trials are
included here. They are collectively
referred to as incomplete block designs.
In plant breeding trials large numbers of
breeding lines need to be screened and
compared for yield, quality and resistance.
Such large numbers of treatments with
complete replication can extend over very
large areas. One option in trials design
would be to have controls randomly scat-
tered throughout the experiment so that
each of the treatments could be compared
with the controls and hence with one
another. With such a design the accuracy of
comparison with the control is increased at
the expense of other comparisons, hence
use of random controls is usually consid-
ered inefcient (John and Quenoulille,
1977). An alternative is the type of design
in which comparisons between pairs of
treatments are all made equally accurate.
These designs are the incomplete block
designs. This subject is dealt with only
briey here and readers requiring more
information should consult Cochran and
Cox (1957), John (1971) and John and
Quenoulille (1977).
Incomplete block designs may require
more planning than randomized blocks but
are no more difcult as far as experimental
Host Plant Resistance 153
Fig. 5.13. The response to recurring selection for resistance to leafhopper yellowing (expressed as a
percentage of yellowing on a check cultivar (Cherokee)), for germplasm pools A () and B () (after Hanson
et al., 1972).
chapter.5 14/7/00 2:08 pm Page 153
operations are concerned. Most of the
incomplete block designs cover the range
from 6 to 200 treatments and work has
indicated that an average gain in accuracy
of about 25% over randomized blocks can
be obtained (Cochran and Cox, 1957).
However, the number of treatments for
which a substantial increase in accuracy is
obtained needs to be determined by experi-
ence. It should be noted though that
incomplete block designs are most useful
when there are few or no missing data.
Three of the more simple incomplete
block designs are depicted in Fig 5.15: the
balanced, the incomplete, Latin Square and
a partially balanced incomplete block
design arranged in a Latin Square forma-
tion (Cochran and Cox, 1957). The bal-
anced design shows seven treatments
arranged in blocks of three units with every
pair of treatments occurring once within
some block. The incomplete Latin Square
was designed for use in greenhouse experi-
ments and is named after the man who
developed it, Fouden, and hence the name
Fouden squares. The example shown is a
balanced design for seven treatments, so
that every treatment appears in each of the
three rows and every pair of treatments
appear together once in the same column.
The example in Fig. 5.15b is of a partially
balanced incomplete block design with six
treatments in blocks of four. Each row
forms a complete replication but some
treatments occur less often than others in
the same block, e.g. treatments 1 and 2
occur twice in the same block (1) and (4)
whereas treatments 1 and 4 occur four
times in the same block (1), (3), (4) and (6).
This design permits greater exibility over
choice of replicates for particular treat-
ments but their statistical analysis is more
complicated and some pairs are more pre-
cisely compared than others. Visual assess-
ment of plants using scales or indices are
the commonest form of resistance evalua-
tion. Bellotti and Kawano (1980) recom-
mended the use of two selection scales, the
rst to evaluate a large number of varieties
when the major objective is to reject sus-
ceptible material and the second allows a
more accurate denition of the reaction of
the selected plants (Table 5.4). The second
scale (Scale B) in Table 5.4 uses three dis-
154 Chapter 5
Fig. 5.14. Mean changes in alfalfa yield over 14 generations of selection in the eld and the laboratory, for
germplasm pools A () and B () (after Hanson et al., 1972).
chapter.5 14/7/00 2:08 pm Page 154
tinct damage symptoms, leaf speckling, leaf
deformation and bud reduction, which
combined dene the damage symptoms of
Mononychellus tanajoa on cassava and
permit small differences in damage to be
detected. The development and use of
scales that permit a comprehensive evalua-
tion of damage or resistance should be
used where possible. Although the need for
subjective assessment in large scale screen-
ing is not denied, there is a need to ensure
that the evaluation is based on actual dis-
cernible differences and scales that incor-
porate a number of important indicator
characters that will provide a safety net
during the selection process.
The value of the subjective assessment
made by an assessor will depend on the
persons perception of the crop and the
pest infestation which, to a large extent,
will be determined by an assessors experi-
ence. The ability of assessors to discrimi-
nate between plant characters can also be
improved through various physical means
including the use of keys and regular inclu-
sion of check plant material. Breeders must
then be aware of two things in relation to
the screening and selection techniques:
rstly, the efciency of the visual assess-
ments for particular crop characters; and
secondly, the variation in this efciency
between individual assessors. The easiest
method of assessing these efciencies is to
compare a visual score assigned to crop
characters with the actual quantitative esti-
mate of the same characters. Alternatively,
Host Plant Resistance 155
(a)
Block
R
o
w
s
1 1 2 4 3 3 4 6 5 1 5 6 7 1 3 7
2 2 3 5 4 4 5 7 6 2 6 7
1 2 3 4 5 6
1 1 2 3 4 5 6
2 4 5 6 1 2 3
3 2 3 1 5 6 4
4 5 6 4 2 3 1
(b)
Columns (Blocks)
R
o
w
s
(c)
Columns (Blocks)
1 2 3 4 5 6 7
1 1 2 3 4 5 6 7
2 2 3 4 5 6 7 1
3 4 5 6 7 1 2 3
Fig. 5.15. Examples of three simple incomplete block designs: (a) balanced design for seven treatments in
blocks of three units; (b) a partially balanced incomplete block design arranged in a Latin Square; (c)
balanced design for seven treatments in an incomplete Latin Square (after Cochran and Cox, 1957).
chapter.5 14/7/00 2:08 pm Page 155
visual scores can be compared with actual
estimates between plants selected by an
assessor and those randomly selected over
the same area. Work with barley comparing
scores of yield with actual yield has
resulted in conicting opinions. McKenzie
and Lambert (1961) concluded that the use
of visual scores for yield was unsatisfactory
for evaluations, while Ismail and Valentine
(1983) concluded that in the early genera-
tions visual selection using scores should
be recognized as a basic tool of breeding.
Briggs and Shebeski (1970) working with
spring wheat and testing the visual selec-
tion efciency of 14 assessors, using com-
parisons between random and assessor
selections, found that assessors had a gen-
eral ability to improve yield by selection,
but that individual selectors demonstrated
a rather limited ability to identify the
actual highest yielding plots in the experi-
ment. The variation between assessors in
their ability to select visually for a specic
character such as yield (the same applies
equally to characters for resistance) is only
a major concern if they are unaware of
156 Chapter 5
Table 5.4. Plant damage scales that have been used to screen cassava plants for resistance to the cassava
mite Mononychellus tanajoa (after Bellotti and Kawana, 1980).
Score Description
A. Initial screening scale used to discard susceptible plants (up to 85%)
0 No mites or symptoms
1 Mites on bud leaves, some yellow to white speckling of leaves
2 Many mites on leaves, moderate speckling of bud leaves and adjacent leaves
3 Heavy speckling of terminal leaves, slight deformation of bud leaves
4 Severe deformation of bud leaves, reduction of bud, mites on nearly all leaves, with whitish
appearance and some defoliation
5 Bud greatly reduced or dead, defoliation of upper leaves
B. The lines selected using scale A are re-evaluated using a scale of 0 to 10
0 No mites or symptoms
1 Plants with one or two bud leaves with light brown or whitish speckling located on a few lobes or
dispersed over whole leaf. Average of less than 50 specks.
2 Light speckling distributed over all bud leaves, average 501000 specks
3 Moderate speckling of bud and terminal leaves. Attacked leaves fade in colour
4 Severe speckling of bud and adjacent leaves. One or two bud leaves show slight deformation.
Leaves have whitish appearance
5 Severe speckling of apical and middle leaves. Light deformation on leaf margin, leaves turn whitish
6 Moderate deformation of leaf margin with indentation almost reaching mid-veins, and curling of
apical leaves resulting in mosaic-like appearance. Basal leaves also show speckling. Slight bud
reduction
7 Bud deformed and reduced, apical leaves with intense mottling
8 Total plants affected, severe reduction of bud and few new leaves developed, general yellow to
white appearance with some apical leaf necrosis
9 Bud completely reduced, no new leaves developing, defoliation beginning with apical leaves
10 Bud dead and severe defoliation
chapter.5 14/7/00 2:08 pm Page 156
their inefciency. When an assessors selec-
tion efciency is known, even if it is low,
the number of selections that are made can
be chosen on the basis of this information.
Perception of favourable characteristics
in crop plants may be improved if an asses-
sor can make reference to a standard plant
or plant character, or if comparisons are
made on a scale that reduces environmen-
tal variation between plants: hence the use
of check varieties in trials plots, the use of
keys to aid visual assessment and the
development of Gardners grid system and
nearest neighbour techniques (Gardner,
1961; Townley-Smith and Hurd, 1973).
The general practice in plant breeding is
to intersperse numerous check varieties
within plots and to select other plants on
the basis of their characteristics relative to
the standard check. In resistance studies
the check variety is usually a universally
accepted highly susceptible variety. The
more numerous the check variety the easier
it is to compare with other plants, since the
efciency of selection is related to the dis-
tance from the nearest standard (Briggs and
Shebeski, 1968). In practice the breeder has
to balance the number of checks and selec-
tion efciency with the area available for
trials and the number of plants that need to
be screened.
The use of keys has been shown to pro-
duce slight increases in selection efciency
(Ismail and Valentine, 1983) but to be use-
ful the key must be carefully designed and
the assessors must be familiar with its use.
One of the biggest drawbacks with the key
developed by Ismail and Valentine (1983)
for yield components in barley was that for
only a small increase in selection ef-
ciency, the key took an unacceptable
increased length of time to use, but a
greater familiarity with the key might have
reduced this time. The use of keys is proba-
bly more important in situations where
checks cannot be used or only used spar-
ingly, such as in the large outcrossing pop-
ulations needed in horizontal resistance
breeding where the susceptible checks
must not cross-pollinate with the resistant
breeding population. The Gardners grid
system (Gardner, 1961) and the moving
means of nearest neighbours (Townley-
Smith and Hurd, 1973) are also appropriate
to situations where checks provide an
additional complication. The moving mean
method of selection is dependent on the
means of nearest neighbours as a compara-
tive standard, while the grid system
reduces the area over which comparisons
between plants are made and selections
chosen. Both these methods are thought to
reduce the environmental variation among
selected plants but neither has been used
extensively, despite even the grid systems
simplicity and ease of use.
Host Plant Resistance 157
Case Study: The efciency of visual assessment of grain yield and its
components in spring barley rows (Ismail and Valentine, 1983)
The principles involved in evaluating the efciency of visual assessments made
by breeders during plants selections are the same whether the characters selected
for are those of agronomic quality or for resistance to insect pests. The efciency
of the visual assessment of yield is used here as an example because yield is a
particularly complex variable to assess. It has a number of components and
assessment involves the mental integration of a number of different variables.
The data for assessments of ve assessors are considered; 99 spring barley
lines were sown in single rows in a randomized block design with three repli-
cates. Visual assessments were made on a 09 scale where 9 = high expression of
the component, and the separate components assessed were: yield/row,
tillers/row, grains/ear and 1000 grain weight. Characters were assessed individu-
ally, the rows harvested and the actual values for each of the characters were deter-
mined.
chapter.5 14/7/00 2:08 pm Page 157
158 Chapter 5
The multiple regression of the actual measures of the three yield components
with yield per row accounted for 82.5% of the total variation. The associations
between the visual assessments (dependent variable) and the actual measure-
ments were determined using linear regression analysis. The r
2
values (the pro-
portion of the variation accounted for by the regression relationship) were used as
a measure of the efciency of the visual assessment (Table 5.5). The number of
lines to save, in order to retain a given proportion of the best lines, was also used
as a measure of efciency (Table 5.6). The proportion of the variation accounted
for by the relationship between visual and actual measures of yield components
was generally poor, with only two assessors having r
2
values greater than 50%.
This suggests there are large differences between what the assessors perceive as a
high yielding component and the actual yield estimates. The second method,
based on the number of lines to save was considered by Ismail and Valentine to
be more relevant to the breeder than the r
2
values. Breeders have to be prepared to
lose some of the best lines during the selection process simply because the alter-
native would be to reduce the number of genotypes (and hence the potential vari-
ability of material) that could be screened. The results in Table 5.6 indicate that
although visual selection may be inefcient it is still better than random selection
(50 lines would have to be selected to save at least 50% of the 10 best lines from
the complete 99 lines if random selection were used). However, considerable vari-
ation does exist between assessors. The two types of analysis point to the same
component, tillers/row, as being the variable most accurately assessed and
selected.
Table 5.5. The r
2
values (expressed as a percentage) from the regressions of visual assessment of
yield against actual yield estimates (from Ismail and Valentine, 1983).
Assessor Yield/row Tillers/row Grains/ear 1000/grain weight
B 43.2 55.6 21.7
C 36.6 52.4 14.7 37.9
E 25.9 39.8 30.4 43.7
A 43.1
D 13.3
Mean 32.4 49.3 22.3 40.8
Table 5.6. The number of lines that would need to be saved in order to ensure at least 50% of the
best 10 lines were saved by the individual assessors when evaluating yield on the basis of four dif-
ferent criteria (yield/row, tillers/row, grains/ear and 1000/grain weight). The total number of lines is
99 (from Ismail and Valentine, 1983).
Assessor Yield/row Tillers/row Grains/ear 1000/grain weight
B 25 18 12
C 25 19 28 14
E 16 15 20 27
A 10
D 26
Mean 20.4 17.3 20.0 20.5
chapter.5 14/7/00 2:08 pm Page 158
Selection efciency can be assessed in
terms of selection differentials, selection
response and heritabilities. The selection
differential is calculated by subtracting the
mean of the lower 10% from that of the
higher 10% selections for each grid and the
block. Since the variation within grids was
less than that over the whole block the
selection differential would be expected to
be lower within each grid than for the block.
Five of the six differentials at 10 and 5%
selection intensity were less than for the
block differential and the sixth grid differen-
tial equalled that of the block (Table 5.8).
Host Plant Resistance 159
Case Study: Gardners grid system and plant selection efciency in
cotton (Verhalen et al., 1975)
Gardners grid system (Gardner, 1961) was developed for maize breeding but its
effectiveness as a method of improving plant selection efciency is independent
of crop type, quantitative trait or breeding method. The method appears to be par-
ticularly useful for discriminating between small inconsistent difference in plant
character, which makes it highly relevant to breeding for horizontal resistance.
In 1967, a 60 60 m block of Westburn cotton was arbitrarily subdivided into
three 20 60 m grids. One hundred individual plant selections per grid were
made on the basis of boll type and apparent yield. The seed cotton from each
selected plant was sawginned and the bre length determined. On the basis of
this measure the upper and lower 10% of the plants were selected over the
whole block and within each grid. There was a total of 85 selections overall and
seed from these plants was sown in 1968 and 1969 and samples sawginned and
measured as before.
Thirty ve of the plants selected over the block were also selected within the
grids; 25 selections were not. If the two methods of selection (block vs. grids)
were identical then theoretically the same plants would be selected in each case.
The observed difference in the plants selected would suggest that one technique
was superior to the other. One of the main reasons for the difference between
grids and the block could be due to environmentally induced phenotypic effects.
If this were the case then smaller differences between selections would be
expected within the grids than over the whole block. An analysis of variance of
within grid and between grid (block effect) bre lengths showed that variation
within grids was less than between them (Table 5.7). The estimates of the compo-
nent variances indicate that the between grid component of the phenotypic vari-
ation accounted for 22% of the variance for the whole block (0.000321/(0.001131
+ 0.000321)). Then the between grids component is mainly environmental and
since phenotypic variance was 22% less within grids, selections within grids
should be more efcient than those over the whole block.
Table 5.7. Partition of total variance into its between and within grid components (0.000321 is
derived from 0.033257 0.001131)/100) (after Verhalen et al., 1975).
Mean square
Estimate of variance
Source df Calculated Expected components
Between grids 2 0.033257 0
w
2
+ n0
B
2
0.001131 + 100(0.000321)
Within grids 297 0.001131 0
w
2
0.001131
chapter.5 14/7/00 2:08 pm Page 159
The selection responses were also calcu-
lated as the difference between the two
directions of selection but in this case the
progeny of the initial selections have been
used (Table 5.8). Ten out of the 12
responses are greater within grids than
over the block. The realized heritabilities
are calculated by dividing the selection
response by the selection differential. In
each case the heritability is greater within
grids than over the block (Table 5.8).
The selections made with the grid
method have been shown to be superior to
those made over the block in terms of
reduced phenotypic variation (22%), a
higher differential (1114%), a higher
selection response (2035%) and a higher
estimated heritability (4152%).
5.5 Evaluating Resistance
The traditional approach to insect host
plant resistance has followed the ideas
espoused by Painter (1951) which empha-
size the mechanisms employed by the
plant to reduce insect infestations and the
morphological and biochemical bases
involved in this. The emphasis on mecha-
nisms of resistance combined with the
need to incorporate resistance genes and
breeding schemes into established breeding
programmes have dominated insect host
plant resistance studies.
5.5.1 Mechanisms of resistance
Painter (1951) divided insect resistance
mechanisms into three categories: non-
preference, antibiosis and tolerance. The
term non-preference has subsequently been
replaced by antixenosis (Kogan and
Ortman, 1978), because non-preference
refers to the insect and this is incongruous
with the notion of resistance being a prop-
erty of the plant.
Antixenosis is the resistance mechanism
employed by the plant to deter coloniza-
tion by an insect. Insects may orientate
towards plants for food, oviposition sites or
shelter but certain plant characteristics
may be a biochemical or morphological
factor, or a combination of both. Plants that
exhibit antixenotic resistance would be
expected to have reduced initial infestation
and/or a higher emigration rate of the pest
than susceptible plants.
Antibiosis in contrast to antixenosis is
the mechanism by which a colonized plant
is resistant because it has an adverse effect
on an insects development, reproduction
160 Chapter 5
Table 5.8. Estimates of selection differentials, selection responses and heritabilities for two selection meth-
ods (within grids or over the block), at 10 and 5% levels of selection. Locations one and two were sampled
on years 1968 and 1969 respectively (after Verhalen et al., 1975).
Response Realized heritability
Selection
Selection method differential 1 2 1 2
10% level of selection intensity
Within grids
Grid 1 0.112 0.054 0.055 0.482 0.491
Grid 2 0.104 0.061 0.045 0.587 0.433
Grid 3 0.130 0.043 0.062 0.331 0.477
Block 0.130 0.041 0.040 0.315 0.308
5% level of selection intensity
Within grids
Grid 1 0.129 0.068 0.052 0.527 0.403
Grid 2 0.121 0.062 0.096 0.512 0.793
Grid 3 0.140 0.076 0.052 0.543 0.371
Block 0.152 0.057 0.056 0.375 0.368
chapter.5 14/7/00 2:08 pm Page 160
Host Plant Resistance 161
and survival. These antibiotic effects may
result in a decline in insect size or weight,
an increased restlessness, poor accumula-
tion of food reserves affecting the survival
of hibernating or aestivating stages, or have
an indirect effect by increasing the expo-
sure of the insect to its natural enemies
(Singh, 1986).
Plant tolerance can be described as the
extent to which a plant can support an
insect infestation without loss of vigour
and reduction of crop yield. Beck (1965)
does not consider that tolerance falls
within the denition of resistance. Plant
tolerance is usually taken to mean that
when two cultivars are equally infested the
less tolerant one has a smaller yield. At the
plant physiological level the loss of toler-
ance is due to an abnormally heightened
response to infestation, at the epidemiolog-
ical level tolerance is considered a compo-
nent of resistance (Robinson, 1976).
The three mechanisms of resistance
will inuence the population dynamics of
a pest insect throughout a season (Fig.
5.16) by their action on the life history
parameters: initial colony size, duration of
larval period, fecundity of adults, mortal-
ity of larvae and adults. The last four of
these parameters are used to determine the
intrinsic rate of increase, r (Section 2.3).
Thomas and Waage (1996) investigated the
effect of each of the four parameters on the
rate of increase assuming that host plant
resistance seeks to reduce r below zero,
the point at which the pest population
will decline over time (Fig. 5.17). The
analysis revealed that not all the compo-
nents of antibiotic resistance have equiva-
lent effects, the effects of the individual
mechanisms depend on the life history of
the pest. With a slow growing population,
increased development time or increased
juvenile mortality have roughly the same
effects on reducing r. As the population
growth rate increases however, the value
of increasing development time markedly
increases (Thomas and Waage, 1996). The
relative advantage of manipulating adult
mortality increases only as fecundity
declines, as the product of juvenile mortal-
ity and development time gets larger and
as population growth rate increases. In
addition the relative value of a decline in
fecundity is dependent on juvenile mortal-
ity and development time. The impact of
antixenosis on the population dynamics is
no less complex, with some of the effects
paralleling those of antibiosis. For
instance, reduced oviposition through
non-preference is equivalent to reduced
fecundity, and it can also increase larval
movement thereby slowing development
time or increasing juvenile mortality.
Increased emigration from the crop due to
antixenosis has the equivalent effect of
increased adult mortality (Thomas and
Waage, 1996). Overall, therefore, not only
different mechanisms but also different
strengths of resistance may be required to
effect equivalent levels of population sup-
pression of pests with different life histo-
ries. Clearly an evaluation of host plant
resistance should look further than just
assessing damage or numbers of insects to
gain a full appreciation of the ways in
which resistance will have an impact on
pest populations.
5.5.2 Evaluating antixenosis and
antibiosis
During a breeding programme plants may
be screened for resistance to insect pests
but most experimental work on resistance
mechanisms takes place either with
released cultivars or with resistant culti-
vars prior to release. Experiments to evalu-
ate antixenosis and antibiosis are usually
labour intensive and can only be carried
out on relatively few cultivars and hence
are rarely included in routine screening
programmes (although there are excep-
tions, e.g. screening in alfalfa and rice).
Antixenotic resistance can be assessed
in preference tests either in a choice or no-
choice situation (Ng et al., 1990; Jackai,
1991) or by comparing the behaviour of
the insect on plants having a range of sus-
ceptibilities. For example, experiments
can be designed which compare the num-
ber of adults alighting on plants (e.g. Singh
et al., 1994) or their oviposition response
chapter.5 14/7/00 2:08 pm Page 161
162 Chapter 5
Susceptible
cultivar
(New generation)
Antixenotic
cultivar
Time
ETL
P
e
s
t
d
e
n
s
i
t
y
Susceptible
cultivar
Antibiotic cultivar
ETL
Time
Time
Tolerant ETL
Non-tolerant ETL
P
e
s
t
d
e
n
s
i
t
y
P
e
s
t
d
e
n
s
i
t
y
Fig. 5.16. Effects of three functional resistance mechanisms on pest population dynamics where the top
graph shows the effects of antixenosis; in the middle, antibiosis; and at the bottom, tolerance (modied
from Kennedy et al., 1987).
chapter.5 14/7/00 2:08 pm Page 162
on a range of cultivars, either in a choice
or no-choice situation (e.g. Jager et al.,
1995). The disadvantage with no-choice
situations is that spurious results may be
obtained if the response of the insects to a
particular cultivar is conditioned by the
presence of other cultivars. Tests such as
these have been carried out in both the
laboratory and the eld. The importance of
choice in inuencing insect response to
resistant and susceptible plants in the eld
has been demonstrated in the work of
Cantelo and Sanford (1984). Intermixed
and isolated pure stands of resistant and
susceptible varieties of potato, cabbage
and lima beans were sown to test for resis-
tance to the potato leafhopper, Empoasca
fabae, the imported cabbage worm, Pieris
rapae, and the Mexican bean beetle,
Epilachna varievestis, respectively. The
response of the insects to the mixed and
isolated pure stands was different in each
case. The plant array did not have a signif-
icant effect on the size of the Mexican
bean beetle population in the resistant and
susceptible cultivars of lima bean, but
antixenosis was more apparent against the
potato leafhopper in isolated pure stands
of susceptible and resistant potato lines
than in mixed resistant and susceptible
lines. The opposite was true with the
imported cabbage worm on cabbage. When
planted in a mixed stand the preference
for egg deposition on susceptible cultivars
was greater than in pure isolated stands
of either resistant or susceptible types.
This example illustrates the differences
between insect responses to their host
plants and the need to identify the
effects of choice on the preference before
Host Plant Resistance 163
0.4 0.2 0 0.2 0.4
Development
time
Juvenile
mortality Fecundity
Adult
mortality
3.5
3.0
2.5
2.0
1.5
1.0
0.5
R
a
t
e
o
f
i
n
c
r
e
a
s
e
Proportion change in parameter
Fig. 5.17. The effect of changes in life history parameter values on the intrinsic growth rate of a pest
population. The zero value for each parameter relates to that given in the text: development time (2 weeks),
fecundity (140 eggs per week), juvenile mortality (0.5 per week) and adult mortality (0.5 per week). The
population growth rate with these parameter values is r = 1.6 (after Thomas and Waage, 1996).
chapter.5 14/7/00 2:08 pm Page 163
designing experiments to evaluate the
potential of antixenosis as a resistance
mechanism.
Antixenosis has also been measured in
terms of the number of insects leaving cul-
tivars, both in the laboratory and the eld.
The rationale behind this approach is that
insects that have located a susceptible
plant will be less inclined to leave it than
an insect on a resistant plant, hence the
numbers leaving susceptible and resistant
plants should differ. However, differences
in both the eld and the laboratory are not
necessarily large. Mller (1958) observed
the arrival and departure of the black bean
aphid, Aphis fabae, on two bean cultivars
in the eld, a resistant Rastatter and a sus-
ceptible Schlandstedter. He observed that
while equal numbers of alatae land on both
varieties only 1% remained to reproduce
on the resistant variety while 10%
remained on the susceptible variety. The
mean staying time for those adults that
landed and then took off again was higher
on the susceptible beans (6 min) than on
the resistant beans (3 min) and these dif-
ferences were signicant. So even though
large numbers landed on both cultivars the
difference in the numbers taking off was
quite small, although sufcient to account
for differences in population sizes on the
two cultivars. A laboratory study of the
reproduction and ight of alatae of the
grass aphid, Metopolophium festucae cere-
alium, from a number of grasses and cere-
als also indicated that adults even reselect
after settling on susceptible host plants
(Dent, 1986). Most alatae ew from the
grasses Festuca rubra (94%) and Festuca
arundinacea (84%) after producing only a
few nymphs. Whereas between 38% and
64% of alatae ew from Lolium multio-
rum, oats, Lolium perenne and wheat,
these alatae deposited more nymphs on the
hosts before ight. This study indicated the
importance of measuring both the ight
response and reproduction, since an evalu-
ation of ight response alone might
provide misleading information about
antixenotic resistance. Also the ranking of
host according to alatae nymph production
differed from that of apterous virginoparae
on the same host plants (Dent and Wratten,
1986) emphasizing the dangers inherent in
assessing host resistance only in terms of
the antibiotic effects on the non-selective
life stage of an insect, e.g. apterous aphids
or lepidopterous larvae.
Antixenosis, and to a lesser extent
antibiosis, is often evaluated by studying
the behaviour of insects on potentially
resistant and susceptible cultivars. An
introductory guide to measuring behaviour
has been written by Martin and Bateson
(1993) and further more detailed studies
relevant to resistance studies are given in
Wyatt (1997) and Eigenbrode and Bernays
(1997). A few elementary points are men-
tioned here in relation to evaluating resis-
tance mechanisms.
The initial temptation to devise behav-
ioural experiments testing for resistance
must be avoided until the observer has had
time to observe the insect and its interac-
tions with the plants in question. This
period of preliminary observation enables
the observer to become acquainted with the
insects behaviour and enable better formu-
lation of appropriate questions and ensure
the correct choice of measures and record-
ing methods.
The rst step after this observation
involves describing the insects behaviour.
Martin and Bateson (1993) describe behav-
iour in terms of structure, consequences
and relations. The structure describes the
behaviour in terms of the subjects posture
and movements, e.g. ying, walking, feed-
ing. The consequences are the effects of the
insects behaviour on the plant (and vice
versa), e.g. insect impaled, insect takes off,
whereas the relations describe where,
when and with whom an event is occur-
ring, e.g. the insect on the adaxial leaf sur-
face. Behaviour is, of course, continuous
but it must be broken down and divided
into discrete units to allow it to be mea-
sured. There must be enough measurement
categories included to describe the behav-
iour adequately, and each should be pre-
cisely dened to allow any other
experimenter to make the same observa-
164 Chapter 5
chapter.5 14/7/00 2:08 pm Page 164
tion. There are four types of behavioural
measure: latency, duration, frequency and
intensity. Latency is the time from some
specied event to the onset of the rst
occurrence of a behaviour. Givovich et al.
(1988) measure the behaviour of 50 alatae
of Aphis craccivora, on each of three cow-
pea lines and found that once transferred
to the plant the aphids took longer to
decide whether to feed on the two resistant
than on the susceptible line. The measure
of latency was also combined with a mea-
sure of duration to assess the response of
the aphid to the cowpea lines. Duration is
the length of time for which a single occur-
rence of the behaviour pattern lasts, and in
the above experiment duration, total prob-
ing time was longer on the two resistant
than the susceptible lines. The frequency is
the number of occurrences of the behaviour
per unit of time. The most common fre-
quency measure used in behavioural stud-
ies of homopterans is the number of probes
made per unit time. Intensity, in contrast to
the other behavioural measures, has no
universal denition and is a subjective
assessment, e.g. the extent of restlessness.
This type of measure should be avoided if
possible unless it can be scored in terms of
the number of movements of a particular
kind per unit time. For example, Bernays et
al. (1983) observed the climbing speed of
Chilo partellus larvae at different tempera-
tures on two different sorghum cultivars
(Fig. 5.18). Behavioural studies are often
aided through the use of physical models
(e.g. Harris et al., 1993; Vaughn and Hoy,
1993), electroantennagrams (EAG) or single
Host Plant Resistance 165
Fig. 5.18. The climbing speed of newly hatched larvae of Chilo partellus on two sorghum cultivars (CV.IS
1151, ; CV.IS 2205, ) over a range of temperatures (after Bernays et al., 1983).
chapter.5 14/7/00 2:08 pm Page 165
cell recording (SCR) (Blight et al., 1995;
Pickett and Woodcock, 1993) and video
recording (see Wyatt, 1997 and Eigenbrode
and Bernays, 1997).
Tests for antibiosis mechanisms of resis-
tance are usually carried out under no-
choice conditions, with the insects
conned on plants or plant materials
inside a cage. Most cages consist of a ne
mesh material that can be used to cover the
plant or plant part as a sleeve, or a cage
either to cover the whole plant or to isolate
specic areas such as a section of leaf.
Tests for antibiosis among plant culti-
vars usually assess the performance of pest
individuals to obtain a mean estimate of
development, reproduction and survival.
Insect development can either be measured
as a rate or expressed in terms of insect
size or weight. The development rate is
usually considered in terms of the length of
time taken between one stage and another
on resistant and susceptible cultivars. For
instance, the larval and pupal periods were
shorter and adult longevity longer for indi-
viduals of Chilo partellus reared on suscep-
tible maize than on resistant maize
(Sekhon and Sajjan, 1987). The more resis-
tant varieties also reduced larval weight by
51 to 60 mg per larva and pupal weight by
49 to 52 mg per pupa. The lengths of
insects have also been used as a measure of
size in resistance studies, both in the bean
ower thrips, Megalurothrips sjostedi
(Salifu et al., 1988) and in the leafhopper,
Amrasca devastans, a pest of okra
(Uthamasamy, 1986).
Differences in antibiotic resistance
between cultivars can also be assessed by
measuring the fecundity and fertility of
insects. This can be extended to popula-
tion effects by taking mortality into
account and obtaining r
m
values (birth rate
mortality rate; Birch and Wratten, 1984;
Holt and Wratten, 1986). Life table analy-
ses have also been used to evaluate culti-
vars for antibiotic resistance
(Easwaramoorthy and Nandagopal, 1986).
Tests to determine antibiotic resistance
may be undertaken utilizing articial
diets, leaf discs, excised leaets,
lyopholized resistant plant materials or
membrane lters with incorporated leaf
extracts (e.g. Wiseman, 1989; Allsopp et
al., 1991; Allsopp, 1994; Hammond et al.,
1995). In addition a variety of innovative
techniques have been developed measur-
ing electrical signals to study insect prob-
ing behaviour (e.g. Kimmins, 1989), the
activity of enzymes (e.g. Wu et al., 1993)
and honeydew excretion (e.g. Pathak et al.,
1982; Cohen et al., 1997).
5.5.3 Morphological and biochemical
bases of resistance
Plant resistance to insects is rarely totally
dependent on a single mechanism, there
are often overlaps between the morphologi-
cal and biochemical bases of resistance,
e.g. trichomes that exude substances that
are toxic to insects as in some species of
Nicotiana which exude alkaloids toxic to
aphids (Thurston et al., 1966). The mecha-
nisms of resistance are divided into their
morphological and biochemical bases
simply for convenience of discussion.
Morphological bases of resistance can be
classied as remote factors, plant architec-
ture/anatomical features, surface factors,
and subsurface factors according to the
level at which they function against the
insect.
Remote factors inuence the orientation
of the insect towards the plant, and hence
can have an antixenotic effect. Although
plant shape may have some effect on insect
orientation the most important remote fac-
tor is plant colour. The attraction of aphids
to yellow reecting surfaces (Kennedy et
al., 1961) is now well known and has been
utilized in the construction of yellow
sticky traps for monitoring aphid numbers.
Yellow is thought to be attractive because it
is the colour, or the wavelength of the
colour, associated with the senescing tissue
favoured by aphids. Adult Pieris rapae pre-
fer green and blue green surfaces for pre-
ovipositional displays (Ilse, 1937), the
cabbage aphid Brevicoryne brassicae is less
attracted to red Cruciferae (Singh and Ellis,
1993; Ellis et al., 1996) and the boll weevil
is attracted less to red cotton plants than
166 Chapter 5
chapter.5 14/7/00 2:08 pm Page 166
green (Stephens, 1957). The work of
Prokopy et al. (1983) has shown the impor-
tance of the leaf colour for the visual selec-
tion of plants by Delia radicum. More
females landed on mimics coloured as
radish leaves than on green or red mimics
of cabbage. Although these differences in
preference occur, it is debatable whether
such characters can be used as a mecha-
nism of resistance since it is unlikely that
the resistant effect of colour will persist in
the absence of hosts having a preferred
colour. Also little can be done by way of
genetic manipulation to affect plant colour
without affecting some fundamental physi-
ological plant process (Norris and Kogan,
1980).
Anatomical features of plants can have a
major inuence on plant resistance and
often they do not conict with other essen-
tial crop characters. For instance, geno-
types of spring wheat that possess awns
were more resistant to grain aphid Sitobion
avenae, than awnless plants (Acreman and
Dixon, 1986), the difference was due to
lower fecundity on and increased likeli-
hood of dislodgement from the awned
wheat. The combination of these factors
reduced the growth of the aphid popula-
tions in the eld by two-thirds on the
awned plants. A resistance base in rice
grain is due to the physical state of the rice
husk (Cogburn and Bollich, 1980). Breese
(1960) reported rice varieties having intact
husks prevented penetration by Sitophilus
sasakii and Ryzopertha dominica. Plant
anatomy can also confer resistance indi-
rectly by its inuence on natural enemies.
Some anatomical features allow natural
enemies greater access to their prey or host
than others (e.g. Heinz and Zalom, 1995).
Open panicled sorghum supports fewer
Helicoverpa larvae than closed panicle
plants, probably because natural enemies
are prevented from locating and attacking
the larvae in the tight connes of the
closed panicle.
Surface factors that provide mechanisms
of resistance include the presence or
absence of pubescence and the presence
and type of cuticle waxes. The surface
waxes of leaves provide a means of control-
ling water loss and act as a natural barrier
to insect attack. Myzus persicae prefers to
settle on non-waxy leaves of Brussels
sprouts (Way and Murdie, 1965) whereas
Brevicoryne brassicae prefers the waxy
leaves of both Brussels sprouts and forage
kale (Thompson, 1963; Way and Murdie,
1965) but not cabbage (Singh and Ellis,
1993). The response of natural enemies to
the presence of waxy leaves may also con-
tribute indirectly to the resistance of the
plant. In the above situation, the natural
enemies of B. brassicae such as
Coccinellidae and Anthocoridae prefer to
oviposit on non-waxy leaves (Russell,
1978) hence the pest mortality due to nat-
ural enemies would be reduced on waxy
leaved plants.
Pubescence on plant surfaces is made
up of individual trichomes or hairs. The
trichomes may be unicellular or multicel-
lular, simple or branched, scale like or
glandular and they may cover both sur-
faces of leaves, stems, shoots and roots.
The absence as well as the presence of tri-
chomes may provide a mechanism for
resistance. Glabrous strains of cotton are
more resistant to Helicoverpa zea and
Heliothis virescens than pubescent culti-
vars (Table 5.9). Oviposition of the female
moths was reduced on the glabrous culti-
vars (Lukefahr et al., 1971; Robinson et
al., 1980). When pubescence is present
the mechanism of resistance may depend
on one or more of four characteristics of
the trichomes, their density, erectness,
length and shape. In addition, some tri-
chomes also possess glands, the exudates
of which confer resistance against some
insects.
Pubescence can affect the oviposition,
locomotion, feeding and ingestion of the
plants insect pests. The oviposition of the
cereal leaf beetle, Oulema melanopus, was
reduced by high trichome density and tri-
chome length in four wheat lines (Webster
et al., 1975) while the Mexican bean bee-
tle, Epilachna varievestis, was observed to
fall from cultivars having leaves with long
trichomes (van Duyn et al., 1972). Leaf
Host Plant Resistance 167
chapter.5 14/7/00 2:08 pm Page 167
trichome density on cotton affects the size
of whitey (Bemisia tabaci) populations,
such that higher numbers are supported on
highly pubescent cultivars than on
glabrous types (Ozgur and Sekeroglu,
1986). This may be because eggs laid at the
base of trichomes are less susceptible to
parasitoid mortality since searching ef-
ciency of the parasitoid decreases with
increasing trichome density (Hulspas-
Jordan and van Lenteren, 1989; Heinz and
Zalom, 1995). The locomotion of aphids
M. persicae and Macrosiphum euphorbiae
was severely impeded by the presence of
glandular trichomes on three wild potato
species, Solanum polyadenium, S. tari-
jense and S. berthaultii. The glandular tri-
chomes exuded a substance that hardened
on the aphids limbs and if it accumulated
it would eventually stick the aphid to the
plant where they would remain immobi-
lized until they died (Gibson, 1971). The
effectiveness of this resistance mechanism
was linked to the density of the glandular
trichomes since the contact frequency
increased with higher trichome density.
There are few detailed analyses of the
inuence of trichomes on the feeding
behaviour of insects as a mechanism of
resistance (Norris and Kogan, 1980),
although it is generally assumed that the
feeding of sap sucking insects may be pre-
vented on pubescent plants because the
proboscis cannot reach the mesophyll of
vascular bundles. The trichomes of soy-
bean inuenced the ability of the leafhop-
per Empoasca fabae to get to the leaf
surface in order to feed on it (Singh et al.,
1971) but in general it is not known to
what extent reductions in population size
on pubescent plants are due to interfer-
ence with feeding (Norris and Kogan,
1980). The larval weight of the cereal leaf
beetle was found to be negatively corre-
lated with increased pubescence and high
mortality was explained by larvae ingest-
ing unusually large amounts of cellulose
and lignin as they consumed the trichomes
to reach the epidermis (Schillinger and
Gallun, 1968). Surfaces other than leaves
are also attacked by insects, and their
structure can greatly inuence the insects
response to the plant. The bark beetle, Ips
paraconfusus, preferred ssured bark to
smooth bark in which to tunnel on both a
host tree, Pinus ponderosa, and a non-host
tree, Abies concolor (Elkinton and Wood,
1980).
The subsurface morphological factors
that affect the resistance of plants to insects
168 Chapter 5
Table 5.9. The number of eggs oviposited by Helicoverpa spp. on pubescent (P) and glabrous (G) cotton
strains (SG = semi-glabrous) and the number of trichomes on the upper leaf surfaces (after Lukefahr et al.,
1971).
Seasonal totals of Number of trichomes in a square
Year Plant character eggs per acre inch on upper leaf surface
19658 P 16,948 3,833
P 17,424 2,821
G 9,082 402
G 8,606 386
19689 P 16,724 2,640
SG 10,230 1,007
G 6,521 589
196970 P 21,058 2,430
P 17,005 1,550
P 30,157 1,772
G 2,426 40
G 5,936 0
G 4,766 0
chapter.5 14/7/00 2:08 pm Page 168
are usually concerned with tissue tough-
ness. The feeding rate and larval growth of
the mustard beetle, Phaedon cochleariae,
were related to the leaf toughness of turnip,
kale and Brussels sprout leaves (Tanton,
1962). For the internode borer Proceras
indicus, which attacks sugar cane in India,
a correlation was found between the per-
centage of damaged internodes and per-
centage bre and rind hardness (Agarwal,
1969). The observed resistance was thought
to be due to one or more characters that
contribute to rind hardness, the number of
vascular bundles per unit areas of rind and
the lignication of cell walls of the vascu-
lar bundle sheaths, the parenchyma of the
subepidermal layers and the intravascular
parenchyma cells (Agarwal, 1969).
The biochemical bases of resistance can
be divided into two broad categories, those
inuencing behavioural responses and
those inuencing the physiological
responses of insects. Insect behaviour mod-
ifying chemicals are further divided into
attractants, arrestants, stimulants, repel-
lents and deterrents, while plant chemicals
affecting the physiological processes of
insects may be classied as nutrients,
physiological inhibitors and toxicants
(Hsiao, 1969). The range of responses
elicited by chemicals and their effects on
insects are quite diverse and complex.
Even simple chemicals consisting of a few
molecules may have multiple sites of
action and inuence the insect in a number
of ways.
The types of chemical responsible for
insect resistance are numerous but the
major classes include the terpenoids,
avonoids, quinones, alkaloids and the glu-
cosinolates. These are all secondary
metabolites, chemicals that are not required
for the general growth and maintenance of
the plant but which serve as plant defence
products. The organic isothiocyanates
(mustard oils) are the main biologically
active catabolites from the glucosinolate
components of crucifers, which like other
glucosinolates defend plants against gener-
alized insects including aphids and
grasshoppers (Panda and Khush, 1995) but
can also act as phagostimulants and as
kairomones, crucifer specic pests (e.g.
Dawson et al., 1993). Some primary and
intermediate metabolites such as citric acid
and cysteine can also act in plant defence
chemistry (e.g. Jager et al., 1996).
There are a number of examples of
plant chemicals that have been used in
promoting resistance to insects.
Oxygenated tetracyclic triterpenes, com-
monly called cucurbitacins, have been
shown to provide antixenotic resistance
against Luperini beetles in cucurbits. The
adult beetles have a great afnity for the
cucurbitacins which act as strong
arrestants and feeding excitants for the
beetles. Cucurbit varieties which are low
in cucurbitacins are resistant to the bee-
tles (Metcalf et al., 1982; Metcalf, 1986;
Metcalf and Metcalf, 1992).
The European corn borer, Ostrinia
nubialis, has two generations per season
throughout most of the USA corn growing
belt. The rst brood damages the leaves
from the early to mid whorl stage and
reduces kernel lling (Ortega et al., 1980)
and it was in this brood that a resistance
mechanism was discovered. Resistance
was found to be due to a chemical, 2,4-di-
hydroxy-7-methoxy-1,4-benzoxazin-3-one
or DIMBOA. The levels of DIMBOA were
found to be high in the seedling stage but
decreased as the plant matured, hence
DIMBOA levels are low at the time of the
second brood infestation. Screening popu-
lations for this chemical could provide a
simple method for evaluating resistant
plants; in practice, however, the analytical
method proved too slow to be of value in
corn-breeding projects (Guthrie, 1980).
Gossypol is a polyphenolic yellow pig-
ment of cotton plants that has been shown
to confer antibiotic resistance to H. zea and
H. virescens (Kumar, 1984). Experiment
has shown that the gossypol (11,6,6,7,7-
hexahydr oxy- 5, 5- di i sopr opyl ( - 3, 3-
dimethyl-2,2-binaphthalene)-8,8-dicarbox-
aldehyde) content of cotton buds can be
increased genetically from a normal 0.5%
to 1.5%, and a larval mortality of 50% can
be expected when cotton square gossypol
Host Plant Resistance 169
chapter.5 14/7/00 2:08 pm Page 169
content is increased above 1.2% (Schuster,
1980). The combination of a high bud
gossypol with glabrous cotton strains can
result in as much as a 6080% reduction in
Helicoverpa zea and Heliothis virescens
larval populations (Lukefahr et al., 1975;
Niles, 1980).
These examples illustrate both the poten-
tial uses of biochemical bases for resistance,
in that they can be highly effective and
could potentially provide a fast means of
screening segregating plant populations,
and the reality of the practical situation
where reliable and fast analytical methods
are required if such an approach is to be
incorporated into a breeding programme.
5.5.4 Diagnostic characters and genetic
markers
The identication of a clearly recognizable
characteristic of resistance is of great value
in a breeding programme. The ability for
instance, to be able to screen plants for an
obvious morphological trait that confers
resistance, such as presence or absence of
pubescence, can markedly improve the ef-
ciency of evaluation and hence progress
towards developing resistant varieties. The
presence of biochemical bases for resis-
tance provide the opportunity for analyti-
cal methods which will speed up the
process of screening segregating plant pop-
ulations. It should be easier to screen for,
for instance, hydroxamic acid in plant
lines than to evaluate the numbers of
insects present in eld plots of each line.
This is why so much research effort con-
centrates on linking insect performance on
cultivars to chemical content and concen-
tration (e.g. Givovich et al., 1992; Nicol
and Wratten, 1997).
The availability of molecular markers is
likely to have a signicant impact in the
future on the ease and precision with
which screening for a resistance character
can be achieved. Genes that are close
together on a chromosome tend to be inher-
ited together (i.e. they are not separated
during recombination). Hence a gene that
can be used as a marker that lies close to a
resistance gene may be used to track the
inheritance of that resistance gene. The
molecular markers currently available are
isoenzymes (enzymes associated with a
particular gene, identied using gel elec-
trophoresis), restricted fragment length
polymorphism (RFLPs: presence or
absence of a restriction enzyme site near a
particular length of DNA identied by a
radioactive probe; Beckman and Soller,
1983) and more recently marker systems
based on the polymerase chain reaction
(PCR) (Saiki et al., 1988) (which amplies
specic lengths of DNA). The identication
and use of markers allows the tracking of
different resistance genes and the construc-
tion of complex resistance lines, the latter
enabling combinations of minor gene
assemblies and pyramiding. The present
state of marker assisted breeding for insect
resistance must be seen only as an interme-
diary stage restricted at present by the
labour required to identify suitable markers
(Chapman, 1996). With increased efforts
over the coming decade to map plant
genomes, new classes of markers will
inevitably be identied and more rapid
procedures and automation will reduce the
burden of work necessary to extend their
application into routine plant breeding.
5.6 Genetic Manipulation
The traditional plant breeding methods
used to develop insect resistant cultivars
involves a lengthy process by which appro-
priate characteristics are selected over a
number of generations. This process has
only been of limited success and for a
number of key insect pests it has proven
very difcult to identify and select for suit-
able resistance characters (e.g. yellow stem
borer resistance in rice; Bottrell et al.,
1992). Genetic manipulation of crop plants
and the introduction of novel genes for
resistances (e.g. from bacteria, viruses or
unrelated plants) could markedly improve
levels of resistance obtained and in some
cases reduce the time and cost of more con-
ventional methods.
170 Chapter 5
chapter.5 14/7/00 2:08 pm Page 170
5.6.1 Techniques in genetic manipulation
Genetic manipulation is the process by
which potentially useful characteristics of
one organism are transferred in the form of
recombinant DNA to another organism in
order that the new organism has enhanced
value such as insect resistance.
Transferring genes from one organism to
another requires the availability of: (i) a
DNA vector, which can replicate in living
cells after foreign DNA has been inserted
into it; (ii) a DNA donor molecule to be
transferred; (iii) a method of joining the
vector and donor DNA; (iv) a means of
introducing the joined DNA molecule into
the recipient organism in which it will
replicate; and (v) a means of screening for
recombinant lines that have replicated the
desired recombinant molecule (Lindquist
and Busch-Petersen, 1987).
The two basic methods for plant trans-
formation currently in use are: (i)
Agrobacterium mediated transfer; and (ii)
direct gene transfer (the DGT technique).
The Agrobacterium technique makes
use of the characteristic of Agrobacterium
to deliver a segment of extra chromosomal
plasmid (the Ti plasmid) called the T-DNA
genes which cause host plant tissue to pro-
liferate to form a tumour (galls) and to syn-
thesize novel metabolites which are used
by the pathogen as carbon and nitrogen
sources (Lazzeri, 1998). This naturally
occurring transformation system has been
modied to enable almost any gene to be
transferred into plant cells. Horsch et al.
(1985) developed a simple and general pro-
cedure for transferring genes into plants
with Agrobacterium Ti vectors. Until
recently, however, Agrobacterium transfer
techniques were conned to the natural
hosts of Agrobacterium which restricted its
value. This led to the development of DGT
methods which include: microinjection of
DNA into cells; electroporation of cells or
protoplasts; puncturing cells with micro-
scopic silicon carbide bres; and particle
bombardment (Barcelo and Lazzeri, 1998).
Each of these techniques have been used to
manipulate crop species but because most
of them require complex cell culture and
regenerative procedures to function ef-
ciently, their broad range application has
been limited (Lazzeri, 1998).
5.6.2 Genetic manipulation for insect
resistance
Two classes of genes have received most
attention for enhancing crop plant resis-
tance to insects: (i) genes encoding for
plant genes; and (ii) those encoding for Bt
endotoxins or other non-plant toxins.
The main plant proteins that have been
investigated for development of resistance
in crop plants are inhibitors of digestive
enzymes, in particular protease inhibitors,
lectins and enzymes (Gatehouse et al.,
1998). In addition there is some potential
in the manipulation of plant secondary
metabolites to produce crops resistant to
insects (Hallahan et al., 1992).
The rst example of a foreign plant gene
conferring resistance to insects was the
transfer of a trypsin inhibitor (CpTi) gene
from cowpea in tobacco Nicotiana
tabacum (Hilder et al., 1987). The trypsin
inhibitors affect insect digestive enzymes
and the cowpea trypsin inhibitors provide
protection against species of Lepidoptera,
Orthoptera and Coleoptera (Gatehouse et
al., 1992) including the vine weevil
Otiorhynchus sulcatus in strawberry
(Graham et al., 1996). The tomato pro-
teinase inhibitors expressed in transgenic
tobacco have been shown to confer resis-
tance against tobacco hornworms Manduca
sexta (Johnson et al., 1989) and the potato
proteinase inhibitor PPi-11 is effective
against Chrysodexis criosoma (McManus et
al., 1994). The a-amylase inhibitor (from
the common bean Phaseolus vulgaris) in
seeds from the transgenic pea plants and
Adzuki bean have been shown to confer
bruchid resistance (Schroeder et al., 1995;
Ishimoto et al., 1996).
Lectins are carbohydrate-binding pro-
teins found in many plant tissues and are
abundant in the seeds of some plant
species (Panda and Khush, 1995). The rst
lectin to be expressed in transgenic plants
was the pea lectin in tobacco which
resulted in enhanced resistance against
Host Plant Resistance 171
chapter.5 14/7/00 2:08 pm Page 171
Heliothis virescens (Boulter et al., 1990).
Since then the snowdrop lectin (GNA) has
been transferred to potato and tomato
where it has reduced damage by
Lepidoptera (Gatehouse et al., 1997) and
aphids (Down et al., 1996). Despite these
successes and the wider potential for use of
lectins (e.g. Allsopp and McGhie, 1996) the
use needs to be tempered by the possibility
of toxicity to consumers and hence the
need for vigorous testing for potential
human toxicity.
The potential of plant derived genes
encoding insecticidal proteins for resis-
tance against insects has as yet only been
demonstrated in the laboratory and
glasshouse trials. They are yet to undergo
the large scale trials and commercialization
process of Bt transgenic crops (Gatehouse
et al., 1998).
The bacterium Bacillus thuringiensis
(Bt) produces a number of insect toxins
which are protein crystals formed during
sporulation (Section 6.8). Preparations of
Bt spores and crystals have been used as
commercial biopesticides for over 20 years.
The rst isolation and cloning of a Bt gene
was achieved in 1981, the transformation
of the endotoxin into tobacco occurred in
1987 (Vaeck et al., 1987) and the rst eld
trials with transgenic crops began in 1993
in the USA and Chile (Merritt 1998). Bt
transformed agricultural crops now include
tomato (Delannay et al., 1989), cotton
(Perlack et al., 1990), maize (Koziel et al.,
1993) and potato (Merritt 1998), while in
forestry, transformed Populus has also been
shown to be effective (McCown et al.,
1991).
Transgenic cotton containing Bt genes
has been eld tested in replicated eld
crops in 1987, and in 1995 bulking of seed
for commercial sale was undertaken
(Harris, 1997a). Transgenic Bt cotton
strains produced enough toxin to provide
excellent control of Heliothis zea,
Trichophlesia ni and Spodoptera species.
The Bt was rst commercialized in the
USA in 1986 on 729,000 ha, then increased
to just over 1 million ha in 1997 and 2 mil-
lion ha in 1998 (Table 5.10) (Merrit, 1998).
The growth in Bt maize is no less spectacu-
lar with ve companies supplying seed for
the 1998 season for a total area of 14 mil-
lion acres in the USA (Anon., 1997). The Bt
maize is aimed at control of the European
172 Chapter 5
Table 5.10. Approximate total areas of commercial plantings (thousands of hectares) of insect protected
crops containing Bt genes from Monsanto (from Merrit, 1998).
Country Year Cotton* Corn Potato
USA 1996 729
1997 1000+ 1300 10
1998 2025+ 4000 20
Canada 1997 4 2
1998 122 4
China 1998 53
Mexico 1997 15
1998 40.5
Argentina 1998 8 1.6
Australia 1997 60
1998 81
South Africa 1998 12
*Figures for cotton in the USA in 1997 and 1998 include a proportion of herbicide tolerant and combined
insect protected and herbicide tolerant cotton.
chapter.5 14/7/00 2:08 pm Page 172
corn borer which annually costs between
$10 and $30 million to control (Ostlie,
1997). The use of Bt maize should reduce
the number of chemical applications and
provide additional control from preserved
natural enemies.
Insect protected crops using Bt genes
have shown rapid uptake by growers
which will encourage further development
and investment into this technology by the
commercial companies. Bt crops and those
modied to express other proteins, etc. are
going to have a signicant impact on the
pest management in the next 20 years.
5.7 Durable Crop Resistance to
Insects
The primary goal of conventional
(Mendelian) breeding is to produce a
higher yielding, better quality crop and
once that is achieved then resistance char-
acters can be incorporated, provided the
method for introducing the resistance can
itself be readily integrated into the breed-
ing programme. In this way, the breeding of
pest resistant plant material is considered
as an adjacent to the main breeding pro-
gramme. Resistance, once it has been iden-
tied, is incorporated into plant material
already having high yield and other
favourable agronomic characteristics (Fig.
5.19 provides a generalized scheme). For
this to be possible, a good source of resis-
tance is required, and it must be controlled
by simple inheritance so that it can be eas-
ily incorporated using backcross breeding
methods. The good source of resistance
may come from plants within a screening
population or from pre-adapted plants
from wild relatives. Provided the resistance
is simply inherited, i.e. the resistance is
controlled by major genes, then both
sources are readily used.
The need for a good source of useful
characteristics led to the establishment in
1973 of the International Board for Plant
Genetic Resources (IBPGR) by the
Consultative Group for International
Agricultural Research (CGIAR) (Harlan and
Starks, 1980). The role of IBPGR is to iden-
tify crops and regions where the need for
conservation is greatest, to coordinate
efforts for collecting germplasm and to pro-
mote the cooperation and free exchange of
germplasm between nations and organiza-
tions. Seven of the CGIARs International
Agricultural Research Centres (IARCs) have
germplasm collections of their designate
crops, hence there are germplasm collec-
tions for all the major food crops (Sattaur,
1989). The collections are maintained as
either seed, seedling lines or clones
(Simmonds, 1979) (Fig. 5.20).
In contrast to the traditional breeding
approaches utilizing existing related crop
species as a source of useful genes, trans-
genic techniques make it possible to intro-
duce non-plant genes or unrelated plant
genes into the required crop cultivars. Both
approaches, however, are largely depen-
dent on the identication and use of single
genes, an approach that makes both types
of crop susceptible to resistance break-
down due to adaptation of the insect pest.
A number of tactics have been proposed to
manage and prolong the use of particularly
useful characters including provision of
refugia, pyramiding genes, multilines and
sequential release of cultivars incorporat-
ing different resistance genes.
Refugia work on the basis that the indi-
viduals that survive exposure to the trans-
genic resistant crop are double recessive
individuals and these are likely to mate
with susceptible individuals from the
refuge areas, the cross of which maintains a
low number of double recessives in the
next generation thereby preventing the
build up of resistant populations. In the
case of Bt cotton, a system of refugia has
been introduced whereby growers are
obliged for every 100 acres of Bt varieties,
either to plant 25 acres (i.e. 20% of the
total acreage) to varieties which do not
contain the Bt gene, and on which they are
able to use standard insect control mea-
sures or alternatively to plant 4 acres with
non-Bt varieties and leave these untreated
with any control measure (Merritt, 1998).
For less crop specic pest species, refugia
Host Plant Resistance 173
chapter.5 14/7/00 2:08 pm Page 173
may be maintained in surrounding alterna-
tive hosts, e.g. with Bt potatoes and
Colorado beetles, hence crop refuges may
not be necessary.
Pyramiding genes for resistance
involves combining two or more resistant
major genes in a single variety and thus
reducing the possibility of a pest insect
174 Chapter 5
Fig. 5.19. The methods of maintaining collections in relation to the crop biology. A = seedlines with storage,
B = seedlines without storage and C = clonal plants. These three methods generate ve groups (after
Simmonds, 1979).
chapter.5 14/7/00 2:08 pm Page 174
assembling the right combination of viru-
lence genes to be able to attack the variety
(Barrett, 1983; Gallun and Khush, 1980),
thus prolonging its life. The disadvantage
of using this approach is that it could cause
the simultaneous loss of several resistance
genes if a virulent biotype happened to
develop. Also, when a number of resis-
tance genes are introduced into a single
variety, there will be no corresponding vir-
ulence genes that can be used to provide
evidence of their presence, and in the
transfer process some of the genes can be
lost (Singh, 1986). Pyramiding genes has
been tried in conventional plant breeding
with rice against the brown planthopper
(Khush, 1980) and has been proposed for
genetically manipulated crops.
The multiline strategy uses the same
principles as variety mixtures for reducing
the level of initial infestation and the rate
of spread of the insect, but differs in that
Host Plant Resistance 175
Fig. 5.20. Generalized diagram depicting the entomological phases of developing plants resistant to insects
and mites (after Gallun, 1980).
chapter.5 14/7/00 2:08 pm Page 175
multilines are composed of phenotypically
similar component lines, derived from a
common breeding programme. The compo-
nent lines differ only in their genes for
resistance, with as many as 615 lines
being combined to produce a single multi-
line. The multiline can be produced using
lines resistant to all prevalent races of the
pest (a clean crop approach) or by includ-
ing lines that are not resistant to all the
races (a dirty crop approach). The former
approach aims to keep the crops as pest
free as possible while the latter provides
greater exibility to the breeder for select-
ing other characters. It also frees the
breeder from continually isolating and
evaluating new sources of resistance
(Singh, 1986) because the life of strong
resistance genes will be extended (van der
Plank, 1963). However, while the use of
multilines has proved successful with the
control of plant pathogens, the application
of multilines to insect pest problems awaits
further research.
The sequential release of resistant genes
is another strategy that could potentially be
used to prolong the life of a particularly
useful cultivar. Resistance genes are held
in reserve and as soon as resistance break-
down becomes inevitable, a new resistance
gene is incorporated into the cultivar. The
drawback of this approach is that new
genes for resistance must continually be
selected and evaluated before the old lines
become susceptible, a continual race that
the plant breeder can never be guaranteed
to win. An alternative approach would be
to recycle or rotate the use of resistant
genes or old resistant varieties. Varieties
can, after widespread use and breakdown
of resistance, be withdrawn and reintro-
duced at a later period when the original
virulent pest races are known to have
become scarce. The success of this
approach will mainly depend on whether
or not the old varieties are equal in yield,
quality and agronomic attributes to the
more recent varieties. If they are not, then
recycling of the resistant genes alone could
provide another option.
All of the above approaches or tech-
niques for prolonging the usefulness of ver-
tical genes are aimed at simulating the per-
manence of horizontal resistance, with
some also attempting to recreate the hetero-
geneity of the wild vertical subsystem, but
they all inevitably create a cycle of intro-
duction and breakdown of vertical resis-
tance genes. Were the identication and
evaluation of vertical resistance genes a
simple and cheap process then such an
approach could be readily justied.
However, this is not the case, since it
requires many scientist years and resources
to produce a resistant cultivar and in some
cases breakdown occurs before the cultivar
has even been released. The identication
and development of cultivars having verti-
cal resistance, whether used sequentially,
in pyramids or as multilines, requires an
enormous investment for the purpose of
prolonging the life of an impermanent form
of resistance, a high cost to pay for a defec-
tive strategy.
The mechanistic approach of Painter
(1951) set entomologists on the search for
readily identiable, simple inherited char-
acteristics that confer resistance to plants
against insects. This approach, rather than
the epidemiological and genetic one taken
by pathologists, is responsible for the ento-
mologists emphasis on the durable resis-
tance obtained from major genes. The
characters identied are usually morpho-
logical and confer durable resistance
because the characters are beyond the
capability of the insect for microevolution-
ary adaptation. Supercially, the identica-
tion and use of this form of resistance
would seem sensible, having the advantage
of simple inheritance, so the characters are
readily transferable and it also provides
durable resistance. In practice, the draw-
back of this approach is that selection and
incorporation of a resistance character for a
particular pest may confer durable resis-
tance to the one pest but it can also make
the plant more susceptible to other pests,
normally of secondary importance. Glossy
non-waxy Brussels sprouts are resistant to
cabbage aphids (Brevicoryne brassicae) but
are susceptible to several other pests
176 Chapter 5
chapter.5 14/7/00 2:08 pm Page 176
including Myzus persicae, a major virus
vector (Russell, 1978). Hairy cultivars of
cotton are more susceptible to some
Lepidoptera than others, e.g. glabrous cot-
ton cultivars resistant to Helicoverpa spp.
are susceptible to Spodoptera littoralis
(Norris and Kogan, 1980). Glandless cot-
tons are more susceptible to Helicoverpa
spp. and blister beetles Epicauta spp.
but are resistant to the boll weevil
Anthonomus grandis. These resistant/sus-
ceptible relations are a result of an imbal-
ance in the plant pathosystem because of
an emphasis on one particular pest. One
problem is simply being replaced by
another: an undesirable situation but one
exacerbated by the lack of a holistic
approach to breeding resistant plants.
Durable resistance to insects is possible,
provided breeders select for horizontal
rather than vertical resistance and prefer-
ably for horizontal resistance that is not
selected for, purely on the basis of a single
mechanism of resistance (durable major
gene, horizontal resistance). Horizontal
resistance is particularly applicable to
insects because they have a high dissemi-
nation efciency and tactical mobility,
which suggests the general lack of a verti-
cal subsystem. This makes breeding for
horizontal resistance relatively simple but
it still requires a major shift in approach by
many breeders. The problem lies in the
reluctance of breeders to consider a new
line of reasoning and a consequent change
in breeding methodology. With the advent
of genetic manipulation, which represents
an even more extreme single gene based
approach, it is unlikely in the near future
that horizontal resistance breeding will
gain much attention.
In the same way that genetic manipula-
tion is not a panacea for insect pest control,
there are of course situations in which
breeding for horizontal host plant resis-
tance would be totally inappropriate. For
instance, crops with a high commercial
value that have special qualities, e.g. wine
grapes, date palm and pineapple, the
essential characteristics of which could be
lost during the breeding process. Also in
highly commercial crops the costs of con-
trolling the pest insect may be small rela-
tive to the crop value, so there is little
incentive to use horizontal resistance, even
if it were possible. Robinson (1987) argues
that the agricultural value of horizontal
resistance tends to be inversely propor-
tional to the commercial value of the crop
(Fig. 5.21). Therefore breeding for horizon-
tal resistance will be most appropriate to
subsistence farming and pasture crops
where prot margins will not permit
expenditure on insecticides. The need for
developing higher yielding, high quality
food crop cultivars resistant to major pests
for the benet of farmers in developing
countries has long been recognized. The
use of resistant cultivars provides the most
appropriate means of control for subsis-
tence farmers and is one form of new tech-
nology that does not require the farmers to
make fundamental changes in their way of
life or farming methods.
5.8 Discussion
Host plant resistance to insects has, in the-
ory, always held an important position as a
potential control option to be utilized in
insect pest management. In practice, how-
ever, it has rarely lived up to its potential.
The absence of complete resistance to
insects (vertical resistance), its breakdown
where it has occurred and the general
acceptance that partial, incomplete resis-
tance is all that can be expected, have
fuelled the belief that the potential of host
plant resistance will never be fullled and
that any resistance obtained will not pro-
vide long lasting control (Buddenhagen,
1983). This view is understandable given
the relative lack of success of scientists in
resistance breeding but it is certainly not
an acceptable situation.
Despite the emphasis on the identica-
tion of mechanisms of resistance to insect
pests, relatively few cultivars have been
produced that are resistant to insects. This
is partly due to the nature of resistance to
insects and to the relatively late interest
Host Plant Resistance 177
chapter.5 14/7/00 2:08 pm Page 177
shown in developing insect resistant culti-
vars. Resistance to insects is often only par-
tial (de Ponti, 1983) and since this can
produce problems for the breeder, the
development of resistance to insects has
taken second place to that of resistance to
pathogens where large discrete differences
have been found. Secondly, the progress in
plant breeding technology and procedures
has mainly centred around the temperate
zones where most of the major crop prob-
lems are associated with pathogens. Also,
for the years in which plant breeding
gained in importance, insect pests were
being controlled effectively and cheaply by
insecticides, so that insect resistant crop
plants were considered unnecessary, or at
least of only secondary importance. The
role of resistance to either pathogens or
insect pests though, has always been sec-
ondary to that of improving crop yield and
quality, and it is this obsession with
maximizing yield that has fashioned
the approach of breeders to that currently
followed today.
Where resistance has been incorporated
into crops either by vertical resistance from
conventional breeding or genetic manipula-
tion, then it will always be susceptible to
resistance breakdown. This could involve
farmers in the boom and bust cycle evi-
denced within pathogen resistance it can
be very costly! The costs to the farmer and
to the region or state can be enormous if a
resistant cultivar breaks down, especially if
the crop is a staple food. An epidemic can
result in widespread damage and some-
times total crop loss, so that individual
farmers can lose their income, source of sta-
ple food and seed for the following years
crop. Governments may nd that they have
to spend more money on insecticides, on
importing alternative foodstuffs or request-
ing aid from other countries. As far as the
farmer who utilized the resistant crop culti-
var is concerned, the costs of a resistance
breakdown can vary from a mild nuisance
to economic and social disaster. The real-
ization of the potential for the latter places
a grave responsibility on the breeders and
gene manipulators of resistant cultivars.
The adoption of horizontal resistance as a
long term durable method of control is
unlikely until the evidence for its value is
overwhelming. However, in the present cli-
mate of enthusiasm of genetically manipu-
178 Chapter 5
Fig. 5.21. The value of horizontal resistance to different types of agriculture (after Robinson, 1987).
chapter.5 14/7/00 2:08 pm Page 178
lated crops, horizontal resistance research
will not receive the funding it requires to
prove its case. The consequence will
inevitably be a benet to the commercial
seed producers but not to sustainable resis-
tance in crop plants and farmers.
Host Plant Resistance 179
chapter.5 14/7/00 2:08 pm Page 179
6.1 Introduction
The interactions between insects and their
natural enemies are essential ecological
processes that contribute to the regulation
of insect populations. In situations where
this interaction is disrupted potential pest
populations may develop unconstrained,
and excessive population growth, which
constitutes a pest outbreak, may occur. Pest
outbreaks can occur when alien insects are
introduced into new geographic areas with-
out their natural enemies or when insecti-
cides destroy natural enemy populations
(Price, 1987). Insects can also become pests
when dissociated from their natural ene-
mies due to a habitat modication that dif-
ferentially favours the pest, e.g. habitat
simplication with a monoculture. The use
of natural enemies in pest management is
mainly concerned with redressing the
imbalance that has occurred through this
dissociation, whether by reintroducing nat-
ural enemies into the system or by trying to
recreate conditions where an association
can occur.
6.2 Objectives and Strategies
The ve methods of biological control are
introductions (often referred to as classical
biological control), inundation, augmenta-
tion, inoculation and natural enemy con-
servation. Historically most emphasis has
been placed on classical biological control
although more recently (the last 1520
years) a great deal more effort has been
directed at inundative and augmentative
control. Classical biological control has
been most successful with pests of fruit,
forest and range crops (Greathead and
Waage, 1983; Huffaker, 1985) where the
perennial nature of the crop permits a con-
tinuous interaction between the natural
enemy and the pest host without the eco-
logical upheavals that are associated with
the management of annual crops (Hassell,
1978). In annual eld crops, the instability
of the system produces a separation in both
space and time between the natural enemy
and the host insect pest population. The
extent of this separation can sometimes be
reduced by the use of management tech-
niques that conserve natural enemies and
enhance the stability of the cropping sys-
tem. This approach of natural enemy con-
servation can also be used to improve the
establishment of introduced natural ene-
mies in classical biological control. In
some situations, conservation techniques
alone may not allow sufcient build up of
natural enemies to control the pest, in
which case natural enemy numbers may be
augmented with releases of laboratory
reared organisms. This augmentative
release method of control can serve to
maintain the pest population below a
threshold density during a critical growth
stage or outbreak period, but the control is
6
Biological Control
180
Chapter.6 10/7/00 11:21 am Page 180
Biological Control 181
only temporary as a natural balance has not
been established.
Inoculative release of natural enemies
may be used in situations where a native
pest has extended its range and has been
separated from its natural enemies or
when an introduced species of natural
enemy is unable to survive indenitely.
The release is made at the start of a season
and will last for the duration of the crop
or season (Greathead and Waage, 1983). A
further form of insect pest control with
natural enemies has made use of ento-
mopathogens which has often been
referred to as an inundative release and
allows entomopathogens to be used to
suppress pest outbreaks in much the same
way as chemicals are used. However,
these biopesticides have added advan-
tages of being most host specic, safer to
use, more environmentally friendly and
preserve the integrity of other biological
control agents.
The science of biological control is the
science of insect population ecology, since
biological control is essentially an interac-
tion between predator and prey popula-
tions. There can be little doubt that
classical biological control has contributed
to the development of insect population
ecology but there is less evidence that bio-
logical control has beneted from the the-
ory of population ecology (Waage, 1989).
Although the theory has provided a scien-
tic framework for the practice of biologi-
cal control, improved our understanding of
predatorprey interactions and helped to
identify suitable attributes for potential
biological control agents. In practice, the
assessment of natural enemies for such
characters is rarely carried out prior to
release due to constraints in time and
resources or because of poor scientic tech-
nique. Also the value of theoretical and
analytical models to biological control is
quite limited since they tend to operate
within quite narrow criteria. Simulation
modelling on the other hand is increas-
ingly used because when combined with
appropriate experiments it can identify the
constraints on pest systems, gaps in experi-
mentation, as well as potential candidate
species for control (Wratten, 1987).
The use of natural enemies has long
been recognized as a fundamental aspect of
insect pest management but too few sys-
tems have been studied sufciently for the
pestnatural-enemy interactions to be ade-
quately understood. Ecological theory
undoubtedly has a role to play in the future
but hopefully in more diverse ways than at
present. The approach presented here tries
to provide a balance between the theoreti-
cal and the practical, the potential and the
realistic, since it is only with a more prag-
matic approach that the use of natural ene-
mies in insect pest management will
continue to gain credence.
6.3 Micro- and Macro-biological
Control Agents
The types of natural enemy used in biologi-
cal control of insects includes pathogens,
and a surprising range of invertebrates act-
ing as predators, true parasites and para-
sitoids. Insect parasites usually kill their
insect hosts and hence differ from true par-
asites that do not. To recognize this funda-
mental difference insect parasites have
been referred to as parasitoids (Reuter,
1913).
6.3.1 Pathogens
The entomopathogens that have been used
in biological control include representa-
tives of bacteria, fungi, viruses, nematodes
and protozoa. There tends to be an inverse
relationship between the attributes of these
pathogens that can successfully be
employed as biopesticides and those that
are appropriate for introductions, augmen-
tation, inoculation and conservation. The
pathogens effective in these longer term,
limited release strategies generally have
lower virulence than their insecticide
counterparts but can survive for longer
periods in the host population, or in the
environment, for example through the pro-
duction of resistant stages (Payne, 1988).
For instance, the European corn borer
Chapter.6 10/7/00 11:21 am Page 181
(Ostrinia nubilalis) is host to Nosema
pyrausta which has a low pathogenicity,
causing some larval mortality especially
under environmental stress but most host
individuals survive to adults but have a
reduced longevity and fecundity (Canning,
1982). The parasite is transmitted transo-
varially and is highly prevalent in the eld.
Other examples include the protozoan
Nosema locustae, the bacterium Bacillus
popilliae, the Oryctes (rhinoceros beetle)
baculovirus, the nuclear polyhedrosis virus
for the sawy Gilpinia hercyniae, and the
fungus Beauveria brongniartii used in the
control of the cockchafer Melontha melon-
tha. However, examples of sustained nat-
ural insect population regulation in crop
systems by entomopathogens are rare. This
is because regulation demands stable
ecosystems, such as forests and rangelands,
and a capacity for the pathogen to spread
(Payne, 1988). Hence for the most part,
entomopathogens have been considered
only as biological alternatives to chemical
insecticides (Waage, 1997).
Primary among the pathogens used as
environmentally friendly alternatives to
chemicals and commercialized for use in
this way have been bacteria, particularly
Bacillus thuringiensis (Bt). Bt was rst
recorded in 1901 in Japan but was named
by Matte in 1927 from a strain isolated in
Germany. By the mid-1940s, the rst com-
mercial preparation named Sporeine was
available in France (Deacon, 1983).
Currently, Bt products are being used on
several million hectares annually to control
lepidopteran pests of agriculture, forestry
and stored products (Smits, 1997) and rep-
resent 39% of the 185 biopesticide prod-
ucts on the market (Copping, 1999). The Bt
bacterium (a Gram-positive spore forming
rod) is characterized by an intracellular
protein crystal which contains a toxin that
acts as a poison for lepidopteran larvae.
When a mixture of the spores and crystals
are ingested by the insect feeding on
treated vegetation, the protein crystal is
solubilized in the alkaline mid-gut (pH
10.210.5) and the toxin is released; the
toxin causes gut paralysis and the bac-
terium is then able to invade the weakened
host and cause a lethal septicaemia. There
are thousands of Bt isolates grouped into
serotypes or subspecies that are character-
ized by agellar antigens (Smits, 1997).
Well known subspecies are Bt kurstaki and
Bt azaiwai, which are active against lepi-
dopteran larvae, Bt israeliensis which is
active against dipteran larvae and Bt tene-
brionis which is active against coleopteran
larvae. Another species of Bacillus, B.
popilliae is also active against beetles,
causing what is known as milky disease
of beetle larvae. A further species, Bacillus
sphaericus, is also of some practical impor-
tance because of its use against mosquito
larvae. However, it is Bt that has domi-
nated biopesticide development and has
found most commercial success to date,
although viruses, fungi and entomopatho-
genic nematodes continue to grow in
importance.
There are six main groups of insect
viruses but only three are sufciently dif-
ferent from human viruses to be considered
safe and these are: the nuclear polyhedro-
sis virus (NPV), the granulosis virus (GV)
and the cytoplasmic polyhedrosis virus
(CPV). All three are occluded viruses, i.e.
the virus particles are enclosed in a pro-
teinaceous shell which has a paracrys-
talline structure called an inclusion body
(Payne, 1982). Around 125 types of NPV
have been described, isolated from
Lepidoptera (butteries and moths),
Hymenoptera, Diptera (craney and mos-
quitoes) and the Orthoptera (grasshoppers
and locusts). NPVs tend to be family spe-
cic with little or no cross infection
between insect families. There are only
about 50 GVs recorded, mainly form
Lepidoptera, and over 200 CPVs but the
CPVs are not very host specic and hence
have less potential as biopesticides. All
three types of virus need to be ingested,
after which the inclusion body dissolves in
the insects mid-gut, releasing the virions
which penetrate the epithelial lining and
start to replicate. The time taken to kill
varies according to dose, insect develop-
ment stage and environmental factors but
182 Chapter 6
Chapter.6 10/7/00 11:21 am Page 182
generally ranges from 6 to 24 days. The
CPVs can take longer to kill and can be rel-
atively unstable (Deacon, 1983). The num-
ber of commercially successful products is
limited (there are 24; Copping, 1999) in
comparison with the number of bac-
uloviruses studied (Smits, 1997); however,
there are a number that proved economi-
cally viable, e.g. Heliothis zea, NPV for cot-
ton, vegetables and tomato, Spodoptera
exigua NPV in vegetables, cotton and
grapes (Georgis, 1997).
More than 750 species of fungi have
been recognized as entomopathogens
(McCoy et al., 1986) with the most potential
as biopesticides from the Deuteromycetes
(imperfect fungi), namely species of
Beauveria, Metarhizium, Verticillium,
Nomuraea and Hirsutella. Individual
species of fungi such as Metarhizium aniso-
pliae have wide host ranges including
species of Coleoptera, Lepidoptera,
Orthoptera, Hemiptera and Diptera (Hall
and Papierok, 1982). In addition to their
wide host range, a further attribute that
makes these fungi attractive as biocontrol
agents is their route of infection.
Entomopathogenic fungi do not need to be
consumed by the insect, they can penetrate
the cuticle, which means that they can be
used against insects with sucking mouth-
parts. Up until 10 years ago, the potential
of fungi seemed limited by their need for
high humidities in order to germinate.
However, more recent developments in for-
mulation technology have removed this
constraint so that it is now possible to use
fungi for control of pests in semi-arid envi-
ronments (Neethling and Dent, 1998).
Worldwide, there are currently 47 fungal
based products used as biopesticides
(Copping, 1999) and it is likely that many
more will be developed in the near future.
The same is true of entomopathogenic
nematodes of which there are currently 40
products available worldwide (Copping,
1999). The prospects for nematode prod-
ucts have been aided by the lack of regis-
tration requirements for these biocontrol
agents. The main interest in nematodes has
been concerned with those species that kill
their hosts in a relatively short time. There
are three families of nematodes to which
this can be considered to apply: the
Steinernematidae, the Heterorhabditidae
and the Mermithidae. The rst two families
are terrestrial nematodes that are associ-
ated with symbiotic gut bacteria that kill
the host by septicaemia, and the
Mermithids are aquatic nematodes that kill
their host upon exit through the cuticle. In
agricultural systems, the searching ability
of nematodes (although limited) makes
them potentially ideal candidates for use in
situations where chemical insecticides and
microbial formulations cannot be targeted
effectively, for instance the cryptic habitats
of pod borers, tree boring insects or for root
attacking insects in soil (Poinar, 1983). The
nematode infective (which is the third
stage larva ensheathed in the second stage
cuticle and referred to as a dauer larva) can
detect its host by responding to chemical
and physical cues. The Steinernematidae
enter the host via the mouth, anus or spira-
cles while the Heterorhabditidae also have
the ability to penetrate the host cuticle
(Kaya, 1987). Once inside the host, the
dauers exsheath and mechanically pene-
trate through the haemocoel where symbi-
otic bacteria are released to kill the host by
septicaemia within 2448 hours (Kaya,
1985). The nematodes develop and repro-
duce, the Steinernematidae need both male
and females per host for reproduction
while Heterorhabditidae are hermaphro-
dites. As the resources are depleted, the
nematodes leave the cadaver in search of
new hosts.
Steinernema carpocapsae products have
been used in a wide range of systems
including home and garden, berries, turf
grass, ornamentals, citrus and mushrooms
(Georgis, 1997) against Lepidoptera and
Coleoptera (Curculionidae and
Chrysomelidae). Steinernema feltiae has
been targeted successfully at dipteran
pests, particularly Sciaridae, while
Heterorhabditis species have been used
against lepidopteran and coleopteran pests.
Provided limitations of production and for-
mulation can be overcome, the potential
Biological Control 183
Chapter.6 10/7/00 11:21 am Page 183
use of entomopathogenic nematodes look
promising.
The situation, however, is less promis-
ing for protozoa as biocontrol agents. Their
low levels of pathogenicity causing chronic
rather than acute infections, and difculty
of large scale production makes these
pathogens unattractive prospects as biopes-
ticides. This is reected in the fact that
there are only two protozoan based biopes-
ticides available worldwide (Copping,
1999). Despite this, further research could
exploit protozoan potential for use as inoc-
ulative augmentations or introductions in
stable habitats such as forests and pastures.
6.3.2 Predators
Predators of insects may be ento-
mophagous insect or vertebrates. Vertebrate
natural enemies of insects pests can be
found in each of the ve animal groups,
although only birds and mammals have
attracted any serious attention. Reptiles
and amphibians have such low consump-
tion rates (Buckner, 1966) that they have
little potential as biocontrol agents and
although sh have been shown to be
important in the control of mosquitoes
(Hoy et al., 1972; Legner, 1986; Bence,
1988) and rice stemborers (Durno, 1989),
more work needs to be done to evaluate the
potential of this major group. Birds have
long been recognized as predators of insect
pests but it is only occasionally that such
effects are quantied (Dempster, 1967;
Stower and Greathead, 1969; Atlegrim,
1989). Buckner (1966, 1967) considered the
role of both birds and mammals in the con-
trol of pest insects in forest ecosystems.
The two groups prey on insects in different
parts of the forest system, with the birds
feeding on free ying adult insects and on
larvae inhabiting the trees while the mam-
mals were mainly restricted to feeding on
ground inhabiting stages of the insects life
cycle, mainly the pupae. The importance of
these natural enemies is potentially quite
high because they are feeding on the later
stages of the insects life cycle, i.e. pupae
and adults, rather than the more abundant
early stages. The animals may concentrate
their feeding on pest prey when they are
readily abundant but are also likely to have
alternative sources of prey that they can
switch to as the pest numbers diminish.
Such generalist feeders are thought to be of
little value as biological control agents and
numbers of mammals and birds can not be
easily manipulated at mans convenience
(Harris, 1990). Hence, the potential for
such animals as biological control agents is
low except perhaps in very special circum-
stances, such as the masked shrew (Sorex
cinereus cinereus) which was introduced
into Newfoundland from the mainland
USA to control the larch sawy,
Pristiphora erichsonii (Buckner, 1966).
Predators feed on all stages of the host,
eggs larvae (nymphs), pupae and adults
and each predator requires a number of
prey individuals to enable it to reach matu-
rity, unlike parasitoids which require only
a single individual. The immature stages as
well as adult predators then have to search,
nd, subdue and consume prey.
Predators can be crudely divided into
those with chewing mouthparts and those
with sucking mouthparts but generally
they lack the highly specialized adapta-
tions associated with parasitism. Predators
are found among the Coleoptera,
Neuroptera, Hymenoptera, Diptera,
Hemiptera and the Odonata, but more than
half of all predators are coleopterans
(DeBach, 1974). The most important fami-
lies within the Coleoptera for biological
control have been the Coccinellidae and
the Carabidae. Other arthropod natural
enemies include predatory mites and spi-
ders. Predatory mites have played an
important role in biological control both in
orchards and glasshouse systems by feed-
ing on phytophagous mites (Gerson and
Smiley, 1990), but too little attention has
been paid to spiders although they are
abundant in perennial systems such as
orchards. A number of studies have identi-
ed numerous species of spider as impor-
tant predators of arthropod pests (Riechert
and Lockley, 1984; Riechert and Bishop,
1990) and capture efciencies have been
determined for some species (e.g.
184 Chapter 6
Chapter.6 10/7/00 11:21 am Page 184
Sunderland et al., 1986). Individual
species of spider appear incapable of track-
ing population changes in specic prey
species, either through increased rates of
attack or through changes in effective pop-
ulation densities in local areas (Riechert
and Lockley, 1984). However, spiders are
for the most part polyphagous and as such
are not considered ideal as candidates for
control agents.
6.3.3 Parasitoids
A parasitoid is only parasitic during its
immature stages when the larvae develop,
either within (endoparasite) or on (ectopar-
asite) their host, from eggs that were either
oviposited inside or near the host. The
developing larva(e) usually consume(s) all
or most of the host and pupate either
within or near it. The adult parasitoid is
free-living and usually feeds on substances
such as pollen, nectar, honeydew or some-
times on the body uids of its host.
Parasitoids exhibit a number of different
life habits and are themselves parasitized
by secondary or hyperparasites. Endo- and
ectoparasites can be solitary or gregarious;
when a single larva is produced per host
individual then the parasitoid is solitary
but if a number of larvae develop within a
single host and all the larvae survive to
maturity, then the parasitoid is described
as gregarious. However, if more than one
species of parasitoid parasitizes a host then
it is known as multiple parasitism. In such
circumstances it is rare for all species to
complete their development. Where a num-
ber of individuals of a single parasitoid
species occur in one host but only a few
survive to maturity, it is referred to as
superparasitism. The host can sometimes
die prematurely with the result that all the
developing parasitoids are lost (van den
Bosch and Messenger, 1973), or if the host
does not die and a number survive then the
adults may be smaller than normal
(Samways, 1981). Different species of para-
sitoid attack different life stages of the pest.
Thus, Trichogramma spp. which attack the
egg stage of insects are known as egg para-
sitoids, Braconidae such as Cotesia glomer-
ata which attack larvae are larval para-
sitoids and so on for adult and nymphal
parasitoids (van Driesche and Bellows,
1996). Further details of parasitoids can be
found in Askew (1971) and Waage and
Greathead (1986).
The types of natural enemy used to con-
trol pest species through introductions,
augmentations, inoculations and conserva-
tion has largely been dominated by ento-
mophagous insects, and within these
groups, primarily by host specic para-
sitoids in preference to more generalist
species. The use of birds and mammals has
largely been restricted to a few specic sit-
uations and is now generally considered
inappropriate by responsible biocontrol
practitioners. The opportunities for the use
of pathogens for inundative release is now
becoming increasingly important as new
developments improve the performance
and attributes of these agents for use as
biopesticides.
6.4 Agent Selection
The choice between the various forms of
biological control classical, augmenta-
tion, inoculation or conservation for the
control of a particular pest will depend on
a number of characteristics of the insect
pest combined with those of the cropping
system in which it is a problem (Greathead,
1984). The following account aims to high-
light some of the more important attributes
of pests, cropping systems and the biologi-
cal control agent that should inuence the
choice of control option.
6.4.1 Pests and cropping system
Insect pests cause different amounts of
damage and contribute to yield loss to
varying extents according to where and
how they feed and the amount they con-
sume (Chapter 3). Insects that feed on
leaves or stems are less likely to be as
much of a problem as those pests that feed
directly on the harvestable plant product.
Solomon (1989) categorizes pest insects of
top fruits according to the thresholds at
Biological Control 185
Chapter.6 10/7/00 11:21 am Page 185
which they cause damage (Fig. 6.1). High
threshold pests are those that have a high
economic injury level, generally feed on
the foliage but not the fruit and at low pop-
ulation levels cause no damage at all. Low
threshold pests are at the other extreme of
the continuum, feeding directly on the fruit
and causing damage even at very low pest
densities.
The use of natural enemies for the con-
trol of low threshold pests is generally not
feasible, which is why biological control is
rarely used for control of disease vectors or
of pests of stored products. The tolerance
levels in stored products are usually very
low so that even a minor infestation may
prove to be unacceptable. However, some
parasitoids can exert control to levels of
98% (e.g. Choetospila elegans against
Rhyzopotha dominica: Flinn et al., 1996)
and in rural storage bins in developing
countries subsistence farmers may have a
higher tolerance for damaged products (de
Lima, 1979). This increase in tolerance has
the effect of increasing the threshold of the
pest, with the result that biological control
then becomes a possible option for pest
control. In the case of stored products,
however, there are still few insect para-
sitoids that appear to exert sufcient con-
trol to be of practical use (de Lima, 1979;
Parker and Nilakhe, 1990) although some
species of predator hold some promise
(Arbogast, 1979).
Other pest characteristics apart from the
type of damage they cause that can inu-
ence the choice of control method are
reproductive rate and dissemination ef-
ciency. Pests having a high reproductive
rate and good dissemination ability will
make poor candidates for control by classi-
cal introduction (Southwood, 1977a) but
such pests may be controlled by augmenta-
tion. With a classical introduction, a high
reproductive rate may allow a pest to out-
strip the population growth of the natural
enemy whereas an augmentation may pro-
vide sufcient numbers of natural enemies
at an appropriate time to suppress the pest.
Mobile pests may simply disperse before
natural enemy populations build up,
although augmentation might prove suf-
ciently quick acting to provide control. As
a general rule, the characteristics of the
pest will inuence the type of biological
control option that is appropriate, so that
pests amenable to control by one option
such as augmentation may not be suitable
candidates for control by another, such as
introductions. The same general rule
applies to the type of cropping system in
which the pest control is sought.
The characteristics of cropping systems
that may inuence the likelihood of suc-
186 Chapter 6
Fig. 6.1. A classication of fruit pests according to their economic impact on the crop (after Solomon,
1989).
Chapter.6 10/7/00 11:21 am Page 186
cess of introduction, augmentation, inocu-
lations or the use of biopesticides can be
considered under climate, crop duration,
scale of planting and cultural/agronomic
practices. Greathead and Waage (1983)
produced an assessment of crop suitability
for biological control based on a score for
each of the above cropping system attrib-
utes (Table 6.1). The scores for climate,
crop duration, scale of planting and cul-
tural/agronomic practices were each
graded from 0 to 3, with the higher score
indicating an increasing chance of achiev-
ing long-term biological control. Hence,
augmentative control would be favoured in
an extreme climate having an erratic rain-
fall, wide ranging temperatures, a short
growth season and scattered small areas of
crops being intensively cultivated. An
introduction, however, would be more
likely to succeed in a uniform climate, long
duration crops (e.g. more than six years) on
large plantations, estates or community
farming schemes that maintain a low level
of cultural/agronomic practices such as
weeding. The different crops thus vary in
their suitability for long-term prospects for
biological control, e.g. millet and sorghum
have low scores and poor prospects for
long-term control whereas the opposite is
true of sugarcane (Table 6.1). The inuence
and importance of such characters has long
been recognized but the above scoring sys-
tem provides a synthesis of the different
cropping system characters into a simple
easily interpreted summary. Such scores
could also allow for the inclusion and eval-
uation of opposing characters, e.g. large
farms (which should favour introductions)
and intensive cultivation (which is less
favourable for introductions).
Cropping systems have usually been
considered in terms of their stability, since
it is normally assumed that habitat stability
makes the establishment of natural ene-
mies more likely due to the presence of
alternative hosts or prey, nectar, pollen or
overwintering sites (Hoy, 1985). The suc-
cessful establishment of natural enemies
introduced against exotic pests is denitely
affected by stability of the cropping system
(Southwood, 1977a). Hall and Ehler (1979)
considered habitats in terms of their stabil-
ity; forests and range lands are more stable
than orchards which are themselves more
stable than annual horticultural or agricul-
tural eld crops. Natural enemies released
into forests and rangeland habitats had the
highest rate of establishment (36%) fol-
lowed by orchards (32%) and then the
annual crops (28%). These results support
those of Beirne (1975) who found that the
establishment of natural enemies released
in orchards and ornamental shrubs was
higher (43%) than those released in annual
crops (16%). Monocultures may also make
Biological Control 187
Table 6.1. Crop suitability assessment for classical biological control. A range of scores is used to account
for the variability in cropping conditions. A low range of scores indicates that augmentation and microbial
pesticides are most likely to succeed while a high range of scores means that classical biological control
through introductions may succeed as well (after Greathead, 1984).
Classical biological control
Crop type Score Attempts Successes %
Cereal 16 21 8 38
Root 310 3 2 67
Vegetable 07 88 27 31
Oil seed 38 2 0
Plantation 712 152 50 33
Fruit 412 185 107 58
Other cash 28 26 3 12
Forage 412 23 9 39
Total 506 208 41
Chapter.6 10/7/00 11:21 am Page 187
establishment difcult because the habitat
lacks diversity, especially if intensively
managed. Diversication may be enhanced
by leaving areas unweeded or maintaining
hedgerows or ground cover, although such
vegetation can provide refuges for pests as
well as natural enemies (Solomon, 1981).
The requirement for habitat diversica-
tion, a stable climate and long duration
crops planted over large areas, for long-
term biological control to succeed stems
from the need to maintain predatorprey
interactions. If a pestnatural enemy rela-
tionship is disrupted over space or time
then the success of the control may be put
in jeopardy. The conditions necessary for
successful short-term control may not be as
critical, since the pestnatural enemy inter-
action does not have to be maintained
indenitely. If cropping systems can be
evaluated for the likelihood of successful
control and this is combined with the rele-
vant information about pest damage and
ecology then the choice of the type of bio-
logical control that is appropriate should
be self-evident.
6.4.2 Biocontrol agent selection criteria
Biological control has a long history and in
the past the introduction of biological con-
trol agents to control exotic pests was as
much an art as science. However, because
of this long history, it is now possible to
look back over time to try to determine
which attributes of natural enemies con-
tributed to the success or otherwise of past
introductions. In general, data indicate that
there has been only one successful intro-
duction in every seven attempts (Clausen,
1978; Hokkanen and Pimentel, 1984),
which would suggest that either the natural
enemies selected were inappropriate or
that procedures for introduction were inad-
equate. Hokkanen and Pimentel (1984)
claim that the choices of natural enemies
for biological control are based on the
wrong criteria. Historically, programmes in
classical biological control have sought
potential agents for introduction from the
area of natural origin of the pest (an old
association between pest and natural
enemy), but it has been suggested that
potentially more successful agents for con-
trol are to be found among natural enemies
that are not normally associated with the
target pest, either because they do not
come from the native area of the pest or
because they come from a related pest
species (new associations; Hokkanen and
Pimentel, 1984). It is claimed by Hokkanen
and Pimentel (1984) that the use of new
associations would make it possible to
increase the chances of successful biologi-
cal control from about 7:1 to about 4:1,
which would represent a signicant
improvement. This result was obtained
from a database analysis and was used as
evidence in support of the new association
hypothesis that had been a subject of
debate during the 1960s. The analysis of
the database has refuelled the debate
(Greathead, 1986; Waage, 1989; Waage and
Greathead, 1988). The contention of
Pimentel (1963) has been that the co-evolu-
tion of the parasitoid/predator and its host
leads to an increased resistance in the host
with a concomitant decrease in the effec-
tiveness of the natural enemy. Hence, the
longer the association between a pest
insect and its natural enemy, the less effec-
tive the enemy will be. If this hypothesis is
correct, then it would imply that natural
enemies introduced as control agents have
only a limited time over which they will be
effective and following on from this, nat-
ural enemies introduced as new associa-
tions will be more effective and exert
control for longer than an old association.
These two implications have been ques-
tioned since there are many examples of
long-standing and effective control by
introduced natural enemies such as the
vedalia beetle for cottony cushion scale in
California (80 years), Crytorhinus for sugar-
cane leafhopper in Hawaii (50 years),
Eretmocerus for citrus blacky in Cuba (40
years) and Cryptognatha for coconut scale
in Fiji (40 years; Huffaker et al., 1971), and
it seems that the evidence for the effective-
ness of new associations depends on the
procedure used in the analysis and the
database used (Waage, 1989).
188 Chapter 6
Chapter.6 10/7/00 11:21 am Page 188
In an analysis of a different database
(BIOCAT, database of the International
Institute of Biological Control), Waage and
Greathead (1988) found no signicant dif-
ference between old and new associations
for the number of introductions that pro-
vided complete, partial or no successes. In
another analysis using the same database,
Waage (1989) found that for all realistic
methods of analysis, old associations were
associated with a signicantly higher prob-
ability of establishment and success: the
complete opposite of Hokkanen and
Pimentel (1984). However, given the unre-
liability of the records that constitute these
databases (including misidentication of
both pests and natural enemies, errors in
dates and places and the arbitrary interpre-
tation of successes) such database analyses
are not really considered a sound enough
basis on which to identify universal selec-
tion criteria (Waage, 1990; Waage and
Mills, 1992). In practice, studies on the tar-
get pest in its region of origin represents
the most promising approach to identifying
suitable biocontrol agents, but the potential
usefulness of new associations should not
be disregarded (Waage and Mills, 1992).
Decisions on the relative merits of types
of natural enemy tend to be based on
reductionist or holistic criteria (Waage,
1990). The reductionist approach involves
selecting agents on the basis of particular
biological attributes, e.g. searching ef-
ciency, aggregative response. The reduc-
tionist criteria are mostly derived from the
parameters of the analytical parasitoid-host
or predatorprey population models (see
below). In particular, the parameters that
are important for lowering of host or prey
equilibria and/or which promote popula-
tion stability (stability of the natural enemy
pest interaction reduces the risk that the
pest population will be driven to extinc-
tion by the control agents which them-
selves would otherwise become extinct)
(Kidd and Jervis, 1996). This reliance on
theory to identify selection criteria has
been questioned (Gutierrez et al., 1994)
since theory seems to have contributed lit-
tle to improving the success of introduc-
tions or understanding the reasons for fail-
ure. In addition, the difculty of estimating
parameter values makes practical use of
these theoretical models very difcult
(Godfray and Waage, 1991).
A more holistic approach to the selec-
tion of appropriate biocontrol agents
reduces the emphasis on the attributes of
one particular agent and instead considers
the interaction between different agents
and mortalities acting on the pest in its
area of introduction (Kidd and Jervis,
1996). The approach considers the selec-
tion of agents that follow rather than pre-
cede major density dependent mortalities
in the pest life cycle (e.g. van Hamburg and
Hassel, 1984), that are constrained in their
area of origin (e.g. by hyperparasitism;
Myers et al., 1988) and that involve the use
of communities of natural enemies and
their complementary action (May and
Hassell, 1981).
6.5 PredatorPrey Theory and
Analytical Models
The parasitoid/predatorprey interactions
involved in biological control through
introductions are largely very simple ones
between a single species of parasitoid or
predator and a pest species. Such simple
interactions rarely occur in the natural
world but their use in biological control
has provided an applied context for models
of two species interactions. The majority of
the theoretical work carried out has been
based on these relatively simple para-
sitoidprey models. These theoretical mod-
els have, to a limited extent, been useful to
biological control for the identication of
important aspects of interactions and
potentially (and apparently) useful attrib-
utes of potential control agents.
There are two basic types of a mathe-
matical model relevant to insect para-
sitoid/predatorprey interactions: they are
deterministic and stochastic models. The
majority of models developed in this eld
have been of the deterministic kind
despite a number of important drawbacks
Biological Control 189
Chapter.6 10/7/00 11:21 am Page 189
associated with their use. Firstly, to provide
an adequate picture of the behaviour of
populations, a deterministic model has to
assume that populations of predator and
prey are of innite size (Maynard-Smith,
1974). They also assume that any reproduc-
tive individual within the population gives
rise to a set number of offspring within a
dened period of time. In contrast, a sto-
chastic model assumes a probability distrib-
ution of offspring over time providing a
greater degree of realism as well as popula-
tion means and variances. Deterministic
models ignore environmental randomness,
that is, the effects of random uctuations in
environmental conditions such as the
weather, although the mathematical dif-
culties of stochastic models which allow for
such randomness are formidable (Maynard-
Smith, 1974). This mathematical inconve-
nience has been one of the main reasons for
the use of deterministic in preference to
stochastic models. Further, only certain
types of deterministic models have been
used. Deterministic predatorprey models
have traditionally been written as either
differential or difference equations (Hassell,
1978). Differential equations are used
where an insect has overlapping genera-
tions and birth and death is a continuous
process, for instance with tropical or
glasshouse insect pests. Most predatorprey
interactions have been modelled with dif-
ference equations which are mostly only
applicable to temperate insect pests having
discrete single generation cycles.
It is obvious from the above remarks
that the types of model used to study
predatorprey interactions have been
largely to deterministic difference (equa-
tion) models which apply to insect pests in
the temperate areas. The situation is fur-
ther limited in that the models that have
been used have concentrated on the simple
dynamics of the host-specic parasitoids
simply because such systems may be col-
lapsed into single age-class models and
also because the number of parasitized
hosts closely denes the number of subse-
quent parasitoid progeny. This contrasts
with predator models where age-class is an
essential feature of predator dynamics and
the number of prey consumed does not
readily relate to the production of progeny.
These points have been mentioned because
this restricted approach to modelling has
had some inuence in the type of agent
selected for biological control programmes.
The following sections consider the tra-
ditional approach to the theory and use of
deterministic models and the factors
thought to inuence the establishment and
maintenance of low, stable equilibrium lev-
els before turning to more recent events
and the challenges posed to this traditional
approach by the use of alternative
approaches.
6.5.1 The general model
The basis of the theoretical approach to
parasitoidprey interactions has largely
revolved around the generalized model:
where:
N
t
and P
t
are the sizes of the initial prey
and parasitoid populations and N
t+1
and
P
t+1
are the number in the next generation;
Fg(N
t
) is the per capita net rate of increase
of the host population and g(N
t
) is a den-
sity dependent function ranging from zero
to one;
c is the average number of progeny pro-
duced per prey attacked and s is the pro-
portion of progeny that are female.
The function (N
t
, P
t
) denes prey survival
and includes all assumptions about para-
sitoid searching efcacy (Hassell and
Waage, 1984; May and Hassell, 1988). (Some
of these functions are given in Table 6.2.)
The progress in the development of
these models has led to a step-wise identi-
cation and exploration of the important
factors inuencing parasitoidprey dynam-
ics, always with the intention of explaining
their role in the regulation of the two popu-
lations. The factors have been evaluated on
the basis of the magnitude of their effects
on the prey equilibrium levels and the
P cs N f N P
t t t t +
=
[ ] 1
1 6 2 ( , ) ( . )
N Fg N N f N P
t t t t t +
=
1
6 1 ( ) ( , ) ( . )
190 Chapter 6
Chapter.6 10/7/00 11:21 am Page 190
stability of this equilibrium population.
Both these criteria have obvious impor-
tance for classical biological control
because a successful introduction should
reduce the prey population to a new low
level and maintain it there indenitely.
The effects of different components of the
models (6.1 and 6.2) on equilibrium levels
and their stability are considered sepa-
rately in the following sections. Although
treated in this way, it should be realized
that all factors affect the potential equilib-
rium levels to some degree.
6.5.2 Equilibrium levels
When a natural enemy is introduced in
classical biological control, it should, if it
establishes itself, reduce the abundance of
the pest to a level below the pre-introduc-
tion population size. With a successful
introduction, this new population level
will be well below the economic damage
threshold. The formal relation between the
initial population (equilibrium) level (K) of
the pest and its new equilibrium level (N
*
)
in the presence of the natural enemy is
described by the ratio:
Typical values for q obtained from eld
studies range from between 0.002 and
0.025 (Beddington et al., 1978) which pro-
vides evidence of the success of some nat-
ural enemies since these gures indicate a
severe depression of pest populations. By
returning to the models (6.1 and 6.2), the
factors that could be responsible for such
marked depressions can be considered.
One of the major factors that could
inuence the equilibrium level would be
the rate of increase (F) of the prey popula-
tion. This rate of prey increase will be
inuenced by factors other than the mortal-
ity caused by the introduced parasitoid
such as fecundity, sex ratio, immigration
and emigration, the availability and quality
of the host plant as well as the presence of
other natural enemies. Hence, although the
rate of increase (F) is affected by many fac-
tors, it is that part of the hosts potential
that the parasitoid must act on to prevent
further host increases (Waage and Hassell,
1982). A high rate of increase would raise
the equilibrium level, so it is important for
biological control that a knowledge of the
factors affecting pest survivorship be
known and taken into account. This is par-
ticularly important for biological control
when density dependent mortalities (g(N
t
))
occur since their existence and timing
could affect the success of an introduction
(Hassell and Waage, 1984). For instance,
where a pest rate of increase is inuenced
N
K
q
*
( . ) = 6 3
Biological Control 191
Table 6.2. A number of examples of specic expressions that have been used for f(N
t
, P
t
) in equations 6.1
and 6.2. a, a and Q are searching efciencies, Th is the handling time as a fraction of total time, m is an
interference constant, and are the fraction of hosts and parasitoids respectively in the ith of n patches, k
is the clumping parameter from the negative binomial distribution (after Hassell and Waage, 1984).
Form of f Reference
Nicholson and Bailey (1935)
Rogers (1972)
Hassell and Varley (1969)
Hassell and May (1973)
May (1978)
f aP
f
a P
a ThN
f QP
f a P
f
aP
k
t
t
t
t
m
t
i
n
t
k
=
( )
=
+
=
( )
[ ]
= +
exp
exp
exp
exp
1
1
1
1 1
1
Chapter.6 10/7/00 11:21 am Page 191
by density-dependent mortality during its
larval stages, then any mortality caused by
an egg parasite may be compensated for
during the larval stage. The introduction of
an egg parasite would mean that very high
parasitism would be needed to achieve any
signicant increase in total mortality and
the introduction would be unsuccessful.
A second factor that could inuence
the pest equilibrium level is parasitoid
mortality during its development in the
host. However, one of the simplistic
assumptions that tends to be made in par-
asitoidhost models is that the parasitoids
suffer no developmental mortality. It is
generally assumed that a host parasitized
in one generation will produce a para-
sitoid in the next, or at least a xed num-
ber of parasitoids in the next generation
(Waage and Hassell, 1982). Mortality may
occur in the developing parasitoid
because of the immunological defences of
the host or through external factors such
as superparasitism, multiparasitism,
hyperparasitism or detrimental climatic
changes. These mortality factors can be
important, especially if any are density
dependent, because any reduction in sur-
vival will affect the value of c and a
reduced value of c increases the hosts
equilibrium level. The value of s, the pro-
portion of female parasitoid progeny pro-
duced (equation 6.2), can also inuence
the host equilibrium level. Most para-
sitoidhost models assume that all adults
that emerge are female which, for the
majority of parasitoid species, is an over-
simplication. Many species of parasitoid
can control the sex of their progeny and
hence vary the proportions of males and
females produced. While experimental
evidence for density-dependent sex-ratios
in parasitoids is limited, theory predicts
that it will be widespread in parasitoids
that exploit and mate on patchily distrib-
uted hosts (Hassell et al., 1983). Although
there are a variety of possible mechanisms
for density-dependent sex-ratios, the pos-
sibilities when sex-ratio is a function of
adult female population size or where it
depends on the ratio of females to hosts,
have shown that the host equilibrium
level increases with increasing sex-ratio
(1s) (Hassell et al., 1983), i.e. the greater
the proportion of males, the lower the
level of parasitism and hence the higher
the equilibrium levels. An increase in the
level of parasitism would be achieved
with a greater proportion of female para-
sitoids, alternatively it could also be
achieved if a parasitoid had a high search-
ing efciency.
The biological characteristics that affect
searching efciency include everything
that alters the amount of time available for
parasitoid searching and everything that
alters the proportion of hosts parasitized in
a given amount of time. The amount of
time a female parasitoid has available for
searching for prey will depend on the
amount of time that has to be spent on
other activities such as mating, feeding,
oviposition and resting. The greater the
allocation of time spent on these activities,
the less time is available for searching for
prey. The proportion of prey parasitized in
a given amount of searching time will
depend on the fecundity of the parasitoid,
the density of the prey and the prey distrib-
ution, as well as factors such as the density
of parasitoids, the presence of alternative
host prey and of competing natural ene-
mies (Hassell, 1978). Not all of these fac-
tors have a signicant effect on equilibrium
levels but on population stability; the latter
will be considered in Section 6.5.3.
In order to maximize its opportunities
for encountering prey an insect parasitoid
needs to minimize the amount of time
spent on activities other than those related
to searching. One of the important factors
that affects this, and ultimately in some
species longevity and fecundity, is the
amount of time spent feeding and the type
of food utilized. Adult parasitoids can be
either pro-ovigenic or synovigenic. Pro-
ovigenic parasitoids emerge with a full
complement of eggs and the necessary
resources for their maturation whereas
synovigenic species emerge with only a
fraction of their total egg complement and
need to feed to maximize egg production.
192 Chapter 6
Chapter.6 10/7/00 11:21 am Page 192
These adults may feed on host
haemolymph or on food that is quite inde-
pendent of their prey such as pollen, nec-
tar and aphid honeydew (Hassell, 1978).
Kidd and Jervis (1989) have calculated
that at least one-third of the worlds para-
sitoids are species that feed on their hosts.
They have considered the effects of such
feeding on host equilibrium levels. There
are a number of possible combinations of
feeding and oviposition, non-concurrent
oviposition with non-destructive feeding,
concurrent oviposition with non-destruc-
tive feeding, and lastly, non-concurrent
oviposition with destructive feeding. For
non-concurrent oviposition and non-
destructive feeding, the parasitoid either
oviposits or feeds on encountering a host;
feeding encounters are equivalent to a
failed oviposition encounter, so if the
probability of feeding or oviposition is
constant, the net effect will be a reduction
in the searching efciency, which would
increase the host equilibrium level. With
concurrent oviposition and non-destruc-
tive feeding, provided the feeding does not
affect the survival of the host, the dynam-
ics would be identical to those of a para-
sitoid which does not feed. If the feeding
does damage the host then the effect
would be to decrease c (parasitoid repro-
duction rate) with a resultant increase in
the hosts equilibrium level. With non-con-
current oviposition and destructive feed-
ing the situation becomes more complex.
Changes in equilibrium levels will be
dependent on energy obtained by para-
sitoids feeding on the host, the mainte-
nance and search costs of parasitoids and
the costs of egg production. Equilibrium
levels of the host will be lowered by high
energy extraction during feeding and low
maintenance, search and egg production
costs (Kidd and Jervis, 1989).
One of the other factors limiting search-
ing time which can also affect host equilib-
rium levels is the amount of time it can
take to locate, subdue and oviposit within
a prey individual, collectively known as
prey handling time. A reduction in the
maximum attack rate due to an increased
handling time would reduce the per capita
parasitism, thus raising the equilibrium
level (Hassell and Waage, 1984). There will
always be a denite minimum time below
which it would be impossible for para-
sitism to occur and this will be determined
as much by the number of eggs available
and the time taken to mobilize each egg
after oviposition as by the time taken to
quell and parasitize the prey. As prey den-
sities increase, the handling time will
become an increasing limitation on the
number of prey attacked. The relation that
typies the situation is given by the type II
functional response (Fig. 6.2).
This concludes a brief introduction to
the factors that are thought to inuence
prey equilibrium levels in parasitoidprey
interactions described by models 6.1 and
6.2. Next, it is important to consider the
role of factors that contribute to popula-
tion stability and persistence at low equi-
librium levels.
6.5.3 Stability
The stability of a hostparasitoid interac-
tion refers to the persistence of both the
prey and parasitoid populations at a low
average level of abundance. Prey numbers
will uctuate around this average value but
will be restrained by the parasitoid popula-
tion from increasing to higher levels. A
problem that intrigued population ecolo-
gists and biological control practitioners
alike has been to determine what factors
are responsible for maintaining stability at
the low equilibrium levels. Knowledge of
the type and the way in which stabilizing
factors operate would be useful for biologi-
cal control, since selection of agents having
suitable stabilizing attributes could
improve the success rate of introductions.
A number of factors have been considered
as possible stabilizing mechanisms. These
include host density dependence, sigmoid
functional responses, mutual interference,
host susceptibility, variable parasitoid sex
ratios, synovigeny and non-random search
in a patchy environment. A short account
of the potential role of each of these factors
in producing stability is given below.
Biological Control 193
Chapter.6 10/7/00 11:21 am Page 193
Density dependence
In the absence of natural enemies, the size
of a prey population will be limited by the
carrying capacity (K) of the environment,
which in effect will be the rst resource
used by the prey that becomes limited as
the population size increases. The avail-
ability of that resource will affect the prey
density that is sustainable, i.e. a density-
dependent resource. In order to study the
effects of density dependence on the host
population, a density dependence has to be
incorporated into the basic model.
Beddington et al. (1975) incorporate:
where: r = log
e
F and 1N
t
/K denes the
change in prey numbers as a resource
becomes limiting (as the numbers approach
the carrying capacity K, 1N
t
/K will
decline to zero making r = 0 and hence no
further increase), into the Nicholson-Bailey
model (see Table 6.2) to give:
P
t+1
= N
t
[
1 exp
(
aP
t
)]
(6.6)
This density dependence has been shown
to be stabilizing at high prey densities
when resources become limiting. However,
if a parasitoid is introduced so that the
equilibrium level is lowered to a point well
below that at which resources are limiting,
then the density-dependent mechanism
will not come into play and the prey popu-
lation is no longer self-regulating. The
model 6.6 will not permit more than a 40%
depression (q = 0.4) of the host equilibrium
level and still remain within the bounds of
stability (Fig. 6.3). This value of q is well
above those cited earlier from actual eld
N N r
N
K
aP
t t
t
t +
|
.
`
,
]
]
]
]
1
1 6 5 exp ( . )
g N r
N
K
t
t
( ) exp ( . )
|
.
`
,
]
]
]
]
1 6 4
194 Chapter 6
Fig. 6.2. A type II functional response curve for the aphid parasitoid Aphidius sonchi (after Shu-Sheng, 1985).
Chapter.6 10/7/00 11:21 am Page 194
examples of depressed equilibrium levels
(such as q = 0.002 to 0.025) which suggests
that stability obtained in the eld has not
been achieved through this type of density-
dependent relation of the prey population
(Beddington et al., 1975). The stability at
the depressed equilibrium levels must be
due to some property of the parasitoidprey
interaction. One possible contender that
has been considered for this role is the sig-
moid functional response, a relation that
will inuence the function (N
t
, P
t
) of the
models 6.1 and 6.2.
Functional response
Parasitoids can exhibit a type III functional
response, a sigmoid response that can, over
part of its range, exert density-dependent
mortality (Fig. 6.4). For the response to be
sigmoidal, the parasitoid must search more
actively as prey density increases. This
would mean that one or more of the compo-
nents of searching activity must be depen-
dent on prey density, which would suggest
parasitoids either have an innate limited
ability to nd prey up to a certain density
or there is a tendency to switch between
prey types according to their relative densi-
ties. Under certain conditions, this density
dependence will operate up to a threshold
host density and may lead to stable equilib-
ria (Hassell, 1984). However, in the case of
specic parasitoids having discrete syn-
chronized generations, the time delays
between changes in population density and
the level of prey mortality in the subse-
quent generation make it unlikely that a sig-
moid functional response could stabilize
the populations (Beddington et al., 1975).
Mutual interference
At high parasitoid densities, individuals
will come into frequent contact and in
doing so could mutually interfere with
each others ability to parasitize hosts. This
would cause a decline in the per capita
searching efciency with increasing para-
sitoid density (Fig. 6.5) due to a reduction
Biological Control 195
2 4 6
Exponential
damping
Oscillatory
damping
B
A
1.0
0.6
0.2
r (=log
e
)
q =
N*
K (
(
Fig. 6.3. Stability boundaries for the model 6.5. The parameter q is a measure of the extent to which the
prey equilibrium N
*
is depressed by predation below its carrying capacity K. The equilibrium point is
stable within the shaded area only. In the region there will be population uctuations within the bounds
found in natural populations. The uctuations in region would be so great that the predator would
effectively become extinct (after Beddington et al., 1975).
Chapter.6 10/7/00 11:21 am Page 195
in searching time during and following
encounters with other parasitoids or with
already parasitized prey. This density-
dependent reaction could provide a power-
ful stabilizing mechanism (affecting f(N
t
,
P
t
)) but it is difcult to see how such inter-
ference could have a signicant stabilizing
effect at the extremely low population den-
sities of parasitoids and hosts evident in
successful biological control programmes
(Hassell, 1984).
Host susceptibility
Any heterogeneity in population distribu-
tion is likely to accentuate the impact of
density-dependent processes. One such
form of heterogeneity could be created by
variation in the susceptibility of individu-
als in the prey population to parasitism.
The probability of prey survival or of
achieving reproductive potential may not
be the same for all individuals within a
population (Hassell and Anderson, 1984).
For instance, it has been shown that larvae
of the larch sawy (Pristiphora erischsonii)
vary in their ability to encapsulate the eggs
of the parasitoid Mesoleieus tenthredinis
(Turnock, 1972). If the prey population
exhibits a range of such susceptibility then
this will create an uneven exploitation by
the parasitoid population. Some prey indi-
viduals will be more at risk that others and
this will help promote stability. The den-
sity dependence necessary for the stabiliz-
ing reaction will come about because of the
changes in searching efciency as the para-
sitoid density increases (affecting (N
t
, P
t
)).
Because the exploitation of the more sus-
ceptible hosts is high at increasing para-
sitoid densities, the searching efciency
per individual over all hosts is lower than
at reduced parasitoid densities (Hassell
and Anderson, 1984).
Variable parasitoid sex-ratios
Hassell et al. (1983) considered the effects
on stability of the changes in sex-ratios
with the density of adult females, changes
in the ratio of parasitoids to hosts and in
aphelinid wasps, the situation where
females develop as primary parasitoids
while males develop as hyperparasitoids.
196 Chapter 6
Fig. 6.4. A type III functional response for the parasitoid Ooencyrtus trinidadensis that attacks Rhodnius
prolixus (after Hassell and Rogers, 1972).
Chapter.6 10/7/00 11:21 am Page 196
This treatment was expanded to consider
how sex-ratios vary with host density and
with the density of male parasitoids
(Comins and Wellings, 1985). The propor-
tion of females produced tends to decrease
with increasing density of female para-
sitoids (P) (for example Fig. 6.6). Such den-
sity-dependent relationships would be
expected to contribute to model stability.
In general, Hassell et al. (1983) found that
sex-ratio shifts, dependent on the ratio of
females to hosts (P/N), were less stabilizing
that those dependent on P alone, but that
this latter stabilizing effect was itself
dependent on a very narrow range of con-
ditions. It seems likely that this kind of
density dependence will only be stabiliz-
ing in concert with other factors. In con-
trast, the aphelinid models showed a high
degree of stability. This group of heterono-
mus hyperparasitoids exerts little control
over their sex-ratio but has contributed to
some of the most stable and hence most
successful host-parasitoid interactions in
biological control, which may bear some
relation to the striking effect on stability of
this method of sex allocation.
The approach used by Comins and
Wellings (1985) involved the introduction
of density dependence of the host popula-
tion growth rate into their model. This pro-
vided a zone of stability which then gave a
more sensitive indication of the stabilizing
or destabilizing effects of a density-depen-
dent sex-ratio. Under these conditions, the
models considered were shown to be
locally stable over a broad range of host
depressions.
Synovigeny
Kidd and Jervis (1989) in modelling the
effects of synovigeny, concluded that egg
limitation or resorption, in the way
portrayed in their particular models,
Biological Control 197
Fig. 6.5. The relationship between searching efciency of the parasitoid Hemeritis canescens and parasite
density (after Hassell and Rogers, 1972).
Chapter.6 10/7/00 11:21 am Page 197
constituted potentially important destabi-
lizing inuences on parasitoidprey inter-
actions. This could have important
implications for selection of biological con-
trol agents because many parasitoids used
are synovigenic.
Non-random search in a patchy environment
Spatial heterogeneity in the distribution of
prey and parasitism provides the most
likely key to stability at low equilibrium
levels in biological control. In the discus-
sion above on the sigmoid functional
response and mutual interference, it was
assumed that prey were distributed uni-
formly and that parasitoids searched ran-
domly for prey. If searching by parasitoids
is non-random and prey are distributed
heterogeneously, then a situation arises
where stability is more plausible. In the
real world, prey populations will tend to
have clumped distributions and para-
sitoids and predators may then spend
more of their time in areas where prey are
plentiful, leading to an aggregation of nat-
ural enemies. By tending to aggregate in
certain patches, particularly those of high
prey density, the parasitoids are leaving
other patches as partial refuges from para-
sitism (Waage and Hassell, 1982). This ten-
dency for aggregation and thereby the
creation of prey refuges provides a power-
ful stabilizing mechanism even at low host
population levels (Beddington et al.,
1978). The extent of this stability hinges
on at least three things: rstly that it is
enhanced by increasing amounts of para-
sitoid aggregation provided the host distri-
bution is sufciently uneven; secondly
that it is enhanced by clumping in the host
distribution (k in Table. 6.2) for a given
amount of parasitoid aggregation if there
is too little contrast, no amount of aggrega-
tion will provide stability; and lastly that
any tendency towards stability is counter-
acted by an increased host rate of increase
198 Chapter 6
Fig. 6.6. The proportion of female progeny as a decreasing function of the density of adult female parasitoids
Hasonia vitripennis parasitizing pupae of Musca domestica (after Hassell et al., 1983).
Chapter.6 10/7/00 11:21 am Page 198
(F) (Hassell, 1984). Overall, the most
important point about this mechanism for
stability is that it can stabilize populations
at different equilibrium levels, which
makes it the factor most likely to be
responsible for stabilizing low equilibria
in successful biological control
(Beddington et al., 1978).
The preyparasitoid models have thus
been used to identify characteristics of the
species interactions that most contribute to
low equilibrium levels and stability. They
have also helped identify specic attributes
of parasitoids which may be indicative of a
potentially successful agent for introduc-
tion. The following criteria were identied
by Beddington et al. (1978): high effective
attack rates, high egg complement, syn-
chronous emergences of parasitoid with
appropriate life stage of prey and lack of
polyphagy and low handling time. In gen-
eral, a high searching efciency relative to
the hosts rate of increase would achieve
sufcient depression and a marked aggre-
gation in patches of high prey density
would be required to provide a stable equi-
librium level (Hassell, 1984).
6.5.4 Metapopulation dynamics and models
The effects of spatial heterogenicity essen-
tially have been viewed in two different
ways. The rst considered above empha-
sizes patchiness and movement within
populations; these ideas have largely domi-
nated predator/parasitoidprey research
(e.g. Hassell, 1978). The other concept, of
metapopulations, although not new
(Nicholson and Bailey, 1935; Murdoch and
Oaten, 1975; Murdoch, 1979) received rela-
tively little attention until the 1980s
(Murdoch et al., 1985; Reeve, 1988, 1990;
Taylor, 1988, 1990, 1991). The metapopula-
tion concept revolves around the idea of
the population or cell, the unit within
which will occur various types of interac-
tion reproduction, population regulation,
predation and within which most move-
ment is conned (Taylor, 1990). A
metapopulation is then a collection or
ensemble of such local populations and
dispersal refers to movement, often once
in a lifetime from one population to
another. Although in abstract terms this
distinction between populations and
metapopulations is quite logical, in prac-
tice dening a metapopulation on the basis
of whether movement is within or between
populations is very difcult (Taylor, 1991).
However, it is central to the metapopula-
tion concept. The proposition that popula-
tion subdivision and dispersal provide an
alternative stabilizing mechanism of clas-
sical predatorprey theory requires that
distinctions can be made between versus
within population movement. If all local
populations are considered as discrete enti-
ties that are essentially equivalent and
equally affected by dispersal then Taylor
(1990) proposes three hypotheses that may
be tested to determine if dispersal is impor-
tant to persistence of metapopulations.
1. Local extinctions and recolonizations
occur frequently.
2. Isolated local populations frequently
would go extinct but migration (usually)
prevents this.
3. Isolated local populations usually
would persist but uctuate and migration
reduces the magnitude of the uctuations.
All of these hypotheses have been explored
using theoretical models (reviewed by
Taylor, 1988; Reeve, 1990) but only the rst
has been studied in the laboratory and the
eld.
The modelling approach has consis-
tently shown that persistence can be
enhanced by dispersal among local popula-
tions within a metapopulation provided
three conditions are met.
1. Asynchrony of local population uctu-
ations.
2. Dispersal rates must be such that if
local extinction is inevitable then predator
invasion must not be too rapid relative to
prey colonization.
3. Some local density dependence is pre-
sent (Taylor, 1990).
These conclusions are consistent with
observation in several laboratory studies
of population structure, dispersal and
Biological Control 199
Chapter.6 10/7/00 11:21 am Page 199
persistence in predatorprey systems
(Huffaker, 1958; Pimentel, 1963). However,
while such studies agree with the theoreti-
cal models there are sufcient methodolog-
ical reasons, e.g. extremely articial scale
and structure, to question their value in
representing real eld situations.
Murdoch et al. (1985) reviewed a num-
ber of examples of successful classical bio-
logical control and concluded that
extinction of local populations may well
occur in the systems studied and that
migration might be essential to their
regional persistence. However, extinction in
the examples cited was certainly not
proven or occurred at a scale more coinci-
dent with local population processes
(Taylor, 1990). One of the problems with
eld observational approaches is that while
local extinction and recolonization may be
observed (and is thus adequate proof of
both the absence of local stability and
metapopulation structure and dispersal), it
is difcult to prove that such extinction has
actually occurred in any but the simplest
situations. Evidence for the importance of
metapopulation processes in the eld is
thus lacking, chiey because few studies
have been conducted to specically obtain
such evidence (Kidd and Jervis, 1996). In
the absence of such experimentation the
real importance of metapopulations to bio-
logical control is yet to be determined.
6.5.5 Multiple species models
Not all of the deterministic models that
have been developed have been describing
two species interactions. There has been a
limited interest shown in multiple species
interactions mainly because the value of
multiple introductions has always been a
question of debate among biological con-
trol practitioners.
Multiple species models may involve
one or more of the following interactions:
1. One parasitoid species attacking two or
more (probably competing) prey species.
2. Two or more parasitoid species attack-
ing a single prey species.
3. Preyparasitoidobligate hyperparasitoid
interactions.
4. Preyparasitoidfacultative hyperpara-
sitoid interaction.
The rst possibility is of little interest here
since it is unlikely that a parasitoid would
knowingly be released against more than a
single pest species. The third possibility is
of interest only from the point of view that
it has been shown that obligate hyperpara-
sitoids will have little effect other than to
improve stability, but their presence can
mean an increase in the equilibrium level
of the preyparasitoid interaction. This is
one of the reasons why parasitoids are
screened for hyperparasitoids prior to
release in any biological control pro-
gramme.
Interactions 2 and 4 are of interest
because many biological control pro-
grammes have led to the establishment of
more than one parasitoid and/or because
indigenous natural enemies have had an
inuence (May and Hassell, 1988). There
has, however, been a long-standing debate
over the merit of such multiple introduc-
tions. It has been argued that inter-specic
competition between the two parasitoids
may occur which may produce an increase
in the pest equilibrium level relative to
control by a single parasitoid system
(Turnbull and Chant, 1961; Watt, 1965;
Kakehashi et al., 1984). Models of multiple
species interactions have tended to predict
in favour of multiple introductions (May
and Hassell, 1981, 1988; Waage and
Hassell, 1982). The model of the two
species of parasitoid interaction with a sin-
gle prey species is an extension of 6.1 and
6.2 and takes the form:
where:
functions f
1
and f
2
are the negative bino-
mial function (May, 1978) in Table 6.2 and
P and Q are the population sizes of each of
the parasitoid species (May and Hassell,
1981).
Q c s N f N P f N Q
t t t t t t +
=
[ ] 1 2 2 1 2
1 6 9 . ( , ) ( , ) ( . )
P c s N f N P
t t t t +
=
[ ] 1 1 1 1
1 6 8 ( , ) ( . )
N F g N N f N P f N Q
t t t t t t t +
=
1 1 2
6 7 . ( ) . ( , ). ( , ) ( . )
200 Chapter 6
Chapter.6 10/7/00 11:21 am Page 200
This model is appropriate for two different
types of interaction, both frequently found
in real systems, where a parasitoid species
P attacks the prey rst followed by para-
sitoid species Q attacking the surviving
prey (usually a different developmental
stage), and where P and Q act together on
the same developmental stage but the lar-
vae of P are superior larval competitors and
always eliminate Q in situations where
multi-parasitism occurs (Waage and
Hassell, 1982). The dynamics of these two
situations are the same. The following
points emerge from the models of the inter-
actions:
1. The two parasitoids are most likely to
coexist if each contributes to the stability
of the interactions, i.e. if k
1
and k
2
(Table
6.2) are small and correspond to a marked
ability for non-random search by both
species.
2. Coexistence is more likely if species Q
has the higher searching efciency,
although too high an efciency will cause a
replacement of P by Q, too low an ef-
ciency and Q will fail to establish at all.
3. In general, the presence of Q will fur-
ther reduce the pest equilibrium level but
there is a slight chance that the level of
depression achieved will be no greater than
that with Q alone.
However, given the difculties of pre-
release evaluation, the differences are only
slight and in general the use of determinis-
tic models predicts that the strategy for
multiple introductions is a sound one (May
and Hassell, 1988).
6.5.6 Life table analysis
In 1970, Varley stated that it would be
pleasant if we could leave behind all the
fog generated by these theories, built with
deductive logic on sandy foundations of
guesswork and start a new era in which
theories are built inductively on the rm
basis of accurate measurements (Varley,
1970). Varley was referring to the use of
analytical techniques to help understand
the processes involved in regulating pest
populations. The simplest of these has
been the measure of percentage parasitism
while the more complex and labour inten-
sive analytical methods involve construc-
tion of life tables for pests and parasitoids.
Percentage parasitism is commonly used
as a simple estimate of the mortality attrib-
utable to a parasitoid species. At different
intervals of time, samples of the pest may
be collected and reared through in the lab-
oratory. The percentage parasitism is calcu-
lated on the basis of the number of insects
in the sample from which parasites emerge.
However, such methods only provide a
snapshot of parasitism and it is well
known that such estimates vary widely
with time and location (Mills, 1997). In the
rst instance, the number and timing of
samples taken are usually inadequate for
the task (van Driesche, 1983) and, sec-
ondly, the impact of parasitism can be
overestimated if single samples are taken
from a host population because parasitized
hosts persist for longer at a particular stage
(Russell, 1987). This problem is greatest
with pests having short development times
at a particular stage which itself leaves few
traces, such as insect eggs or homopteran
nymphs. The problem is least important
when traces of some or all stages in a gen-
eration are preserved with evidence of
their various mortalities (leaf miners, gall
forming insects, bark beetles) (Hassell and
Waage, 1984). To assess a parasitoids con-
tribution to host population mortality, it is
the percentage attacked for the generation
which must be determined and this may be
best done within the context of a life table
study (Kidd and Jervis, 1996).
Age-specic life tables are more com-
monly used in entomology than time-spe-
cic life tables. The former are based on
the fate of a real cohort throughout a gener-
ation while the latter are based on the fate
of an imaginary cohort, identied by deter-
mining the age structure of a sample of
individuals, from what is assumed to be a
stationary population with overlapping
generations. The stationary population
refers to a constant recruitment rate and
mortality rate during the life of the individ-
uals in the table (Southwood, 1978).
Biological Control 201
Chapter.6 10/7/00 11:21 am Page 201
Age-specic life tables are only applicable
to pest insects having discrete generations
which largely limits their use to temperate
situations. Both time- and age-specic life
tables have been dealt with by Begon and
Mortimer (1981), Horn (1988) and Dent
(1997a). The concern here is more with the
role of age-specic life tables in key factor
analysis, since this technique provides a
means of identifying the potential role of
parasitoids and predators in the regulation
of pest populations.
The data required to construct a life table
for key factor analysis are a series of succes-
sive samples taken from each life stage of a
generation, over eight to 15 generations
(Southwood and Jepson, 1962; Bellows et
al., 1989; Manly, 1990). The numbers are
most usefully expressed as numbers per
metre squared or some other unit measure,
since this allows direct comparisons to be
made between samples taken at different
times. For each sample, identiable causes
of mortality such as parasitism will be
recorded. Varley et al. (1973) dened a set of
rules that should be adhered to when mor-
tality data are recorded during the construc-
tion of life tables:
1. Where mortality events from denable
causes are well separated in time, they are
treated as if they are entirely separated with
no overlap, while events which seriously
overlap in time may be more conveniently
considered as acting contemporaneously.
2. Every insect must be considered either
as alive and healthy or as certain to die or
dead, e.g. a parasitized insect although
alive is considered as certain to die.
3. No individual can be killed more than
once. If the host is attacked by two para-
sitoids, then the death of the host must be
credited to the rst parasitoid species. If the
second parasitoid is, in fact, the eventual
victor, it must be credited with the death of
the rst parasitoid. The second attack is
entered in the life table of the parasitoid,
but not that of the host (Varley et al., 1973).
The rst step in constructing a life table is
to obtain an estimate of the potential natal-
ity. This is calculated from an estimate of
the mean fecundity per female which is
multiplied by the number of females of
reproductive age. The values for each gen-
eration are converted into logarithms. The
difference between actual and potential
natality (k
o
) can then be calculated by sub-
tracting the log of the actual number of
eggs produced from the log potential natal-
ity. The k
o
value in Table 6.3 has been cal-
culated on the basis of each adult. When
negative k
o
values are obtained (as in 1970
generation I, Table 6.3), it suggests either
an immigration of adult females or a
greater than assumed maximum potential
fecundity (Benson, 1973).
The population density sampled at each
stage is similarly converted into logarithms
and the mortality (k
1
k
n
values) calculated
as the difference between two stages (Table
6.4). The total mortality per generation (K)
202 Chapter 6
Table 6.3. The mean fecundity of adult cabbage root y in Canada, based on the assumption of 80 eggs
per female and equal numbers of males and females, the observed fecundity and the subsequent mortality
factor k
o
(after Benson, 1973).
Generations
1967 1968 1969 1970
I II III I II I II I II
Log potential
eggs per adult 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
Log observed
eggs per adult 1.02 1.47 0.88 1.53 0.65 1.71 1.26
k
o
0.58 0.13 0.72 0.07 0.95 0.11 0.34
Chapter.6 10/7/00 11:21 am Page 202
is the sum of all the k
n
mortalities occur-
ring at each stage. The contribution of each
mortality k value to total mortality can be
assessed graphically (Varley and Gradwell,
1960; DeGrooyer et al., 1995) or quantita-
tively (Podoler and Rogers, 1975). The
graphical method simply involves a visual
assessment of the correlation between K
and k
o
k
n
when the K and k values are
plotted against their corresponding genera-
tions (Fig. 6.7). The k mortality that most
closely correlates with the overall K is
referred to as the key mortality factor. A
more quantitative approach (Podoler and
Rogers, 1975) involves a regression analy-
sis of the k values against total mortality K.
The mortalities (k values) that contribute
little to changes in K have very low regres-
sion coefcients and those that play a
major role have high values. However, this
is not a particularly precise test because
the sampling errors incorporated in k will
also appear in K but it may prove useful
where the identication of the key factor is
in doubt (Southwood, 1978). A more
sophisticated approach was developed by
Manly (1977) involving partition of vari-
ances in a multiple regression analysis.
Where life tables and key factor analysis
are carried out to determine the role of nat-
ural enemies in pest population changes,
the relationship between mortality and pest
density will need to be known. Only when
the mortality is density dependent will the
natural enemies have a potential role as
control agents. The various k mortalities
can be tested for density dependence if
each value of k is plotted against N
t
, the
logarithm of the number of pest individuals
entering the stage on which it acts. These
data should be analysed using a regression
technique and provided that the results are
signicant, the regression coefcient will
provide a measure of how the mortality fac-
tor will act. A regression coefcient of
exactly 1.0 means that the mortality factor
is perfectly density-dependent and will
compensate completely for any changes in
density. A slope of greater than 1.0 will
mean over-compensating density-depen-
dence and of under 1.0 under-compensat-
ing density dependence. The plot of data
Biological Control 203
Table 6.4. A life table for the carrot y Psila rosae over a 2-year period (after Burn, 1984).
Population density Log
10
population k value
(per 50 roots) density for mortality
Age class
(mortality factor) 1975 1976 1975 1976 1975 1976
Potential fecundity (eggs) 340 33 2.531 1.518
(k
o
loss in natality) 0.199 0.746
Egg input 215 184 2.332 2.264
(k
1
egg mortality) 0.107 0.209
Larvae I and II 168 113 2.225 2.053
(k
2
early larval mortality) 0.322 0.366
Larvae III 80 49 1.903 1.690
(k
3
late larval mortality 0.040 0.027
Pupae 73 46 1.863 1.662
(k
4
pupal mortality) 0.064 0.201
Adults plus parasites 63 29 1.799 1.462
(k
5
parasitism) 0.109 0.015
Adults 49 28 1.690 1.447
(k) 0.778 0.072
Chapter.6 10/7/00 11:21 am Page 203
could also reveal an inverse density-depen-
dent relationship, with the mortality factor
having greatest effect at low densities. A
non-signicant relationship could imply
density independence or delayed density
dependence. If the values of k and N
t
are
plotted and the points joined in a time
sequence, then the presence of delayed
density dependence can be identied if the
points form a spiral (Fig. 6.8). A delayed
density-dependent relationship will occur
when the effects of mortality are not imme-
diately effective but inuence the size of
the subsequent generation.
Life tables, although most often used for
insect pests, can also be constructed for
parasitoids. Data from such life tables can
be used to calculate the area of discovery
a of the parasitoid that can then be used
in the type of population models consid-
ered above (Varley et al., 1973). The role of
hyperparasitoids in the population dynam-
ics of parasitoids can also be investigated
using key factor analysis.
The construction of life tables is an
important component in the understanding
of the population dynamics of a species
(Southwood, 1978) but it does take consid-
erable time and manpower to obtain realis-
tic results (Pschorn-Walcher, 1977). They
also have the drawback that they are based
on correlation rather than demonstration of
cause and effect (DeBach, 1974; Huffaker
and Kennet, 1969) and are very sensitive to
an underestimation of mortality unless
taken frequently (Wilson, 1985). However, if
carried out correctly life tables still remain
the most important analytical technique
available for identifying key mortality com-
ponents in an insect pests life cycle.
204 Chapter 6
Fig. 6.7. k values plotted against generation for the winter moth (Operophtera brumata) to determine the
key mortality factor (k
1
winter disappearance, k
2
parasitism by Cysenis, k
3
parasitism by other insects, k
4
microsporidian disease of larvae, k
5
pupal predation and k
6
pupal parasite). The key factor is k
1
identied
because it made the biggest contribution to change in the generation mortality (K = k
1
+k
2
+k
3
+k
4
+k
5
+k
6
)
(after Varley et al., 1973).
Chapter.6 10/7/00 11:21 am Page 204
6.6 Practical Approaches to the
Evaluation of Natural Enemies
The experimental methods used to evaluate
the potential role of natural enemies in pest
regulation are very diverse; in the eld, they
range from intensive sampling and data col-
lection to observations of individual behav-
iour, and in the laboratory from studies of
maximum prey consumption to the use of
serological techniques to establish the pres-
ence of prey in the guts of predators. All of
the techniques have a number of advantages
and disadvantages, or are appropriate only
to specic situations. Despite this, it is pos-
sible to generalize to some degree and
suggest a certain logical sequence of experi-
ments that should enable natural enemies to
be ranked according to their effectiveness in
reducing prey numbers (Fig. 6.9). This
sequence of experiments will be considered
in more detail below.
6.6.1 Field survey, collection and observation
Inevitably, the rst step in any investiga-
tion of the role of natural enemies in pest
control involves a eld survey to determine
which species are present and how their
numbers vary in relation to those of the
pest insect (e.g. Sivasubramaniam et al.,
1997). This usually means that intensive
eld sampling is carried out using a variety
of techniques over a number of seasons in
order to gain some insight into the magni-
tude of seasonal uctuations and some
indication of the relative importance of the
different natural enemies. The researcher
would be looking for apparent associations
and correlations between insect pest num-
bers and the numbers of a particular group
or species of natural enemy (Figs 6.10 and
6.11) (e.g. Heong et al., 1991), although the
existence of such correlations is not proof
of a causal relationship between pest and
natural enemy numbers. One way round
this problem is to make a step-by-step
analysis of the role of each of the other pos-
sible causes of pest suppression such as
emigration and weather. However, such
studies may produce only nagging doubts
which will then suggest the need for other
qualifying information on the dynamics of
predation processes from the eld
(Wratten, 1987). Provided these eld sur-
veys are seen as an initial rst step in the
study of pest/natural enemy associations,
and too much emphasis is not placed on
their independent value, then they repre-
sent an important springboard for further
research. The problem comes when deci-
sions about the potential value of natural
Biological Control 205
Fig. 6.8. The time sequence plots showing how the
different density relationships may be recognized.
(a) Direct density dependence (b positive); (b)
inverse density dependence (b negative); (c) delayed
density dependence (b = 0); (d) density
independence (b = 0). b refers to the slope of the
relationship (after Southwood, 1978).
Chapter.6 10/7/00 11:21 am Page 205
enemies as control agents are based solely
on such associations.
Supplementary information about pest
and natural enemy associations can be
obtained by direct observation of predation
events or parasitoid oviposition. Parasitoid/
prey associations can be determined from
eld collections of potential prey which are
reared through in the laboratory and emerg-
ing adult parasitoids identied. Direct
observation can be used in the laboratory or
the eld to establish the diet breadth of a
predator and with detailed observation, the
rate of predation can be determined (Mills,
1997; Edgar, 1970; Nyffeler et al., 1987). The
use of sentinel prey (non-mobile stages such
as eggs or pupae) placed in the eld can be
used to monitor losses by predation (e.g.
Andow, 1992; Cook et al., 1994, 1995; Berry
et al., 1995). Such approaches can provide
useful information on predation as long as
the prey are no more or less susceptible to
predation than the wild population.
Where more detailed information about
predatorprey relationships is required at
this early stage in the study then the use of
dissection, serological tests, electrophore-
sis and radio-isotope techniques may be
considered appropriate.
6.6.2 Dissection and biochemical techniques
Predators and parasitoids may either chew
their prey or feed on their body uids. For
predators that chew their prey, it may be
possible to identify their presence from
unconsumed prey remains (e.g. Andow,
1992; Heinz and Parrella, 1994) or dissect
the predators gut to identify the consumed
remains of the prey (e.g. Sunderland,
1975). Although Sunderland (1975) was
206 Chapter 6
Fig. 6.9. A generalized scheme for evaluating the potential of natural enemies as potential control agents.
Chapter.6 10/7/00 11:22 am Page 206
able to identify fragments of prey cuticle
from earthworms, spiders, aphids, beetles
and diptera from the guts of carabid bee-
tles, such an approach has the obvious
drawback that soft bodied prey may not
provide detectable fragments and uid
feeding predators do not ingest recogniz-
able fragments of their prey (Mills, 1997).
There now exists a range of biochemical
techniques that can be used to indicate the
presence or absence of a particular prey
species in an individual predator and more
recently techniques have been developed
that permit quantitative estimates of prey
remains in predators at the time of death
(Sopp et al., 1992). The use of biochemical
techniques for studies of predation and
parasitism have recently been reviewed
by Symondson and Hemingway (1997),
Powell et al. (1996), Greenstone (1996) and
Powell and Walton (1995).
One of the simplest techniques for iden-
tifying prey in the guts of natural enemies
are serological tests, mainly because it is
possible (depending on the type of test) for
someone with little training to examine
large numbers of insects with very simple
apparatus (Boreham and Ohiagu, 1978;
Biological Control 207
Fig. 6.10. The changes in numbers of aphids ()
and the active predatory stages of aphid-specic
predators () in a cereal eld in the UK in 1980
(after Chambers et al., 1983).
Fig. 6.11. The relationship between the mean numbers (0.5 m
2
) of the adult parasitoids Aphidius spp. and
cereal aphids in UK grass elds in May 19721979 (after Vickerman, 1982).
Chapter.6 10/7/00 11:22 am Page 207
Crook and Sunderland, 1984). The theory
behind the serological tests is simple. Each
prey insect is composed of many chemical
substances, some of which are unique to
particular species. A chemical extract of a
prey species (the antigen) is introduced into
the blood serum of an animal (usually a
rabbit) so that antibodies are produced,
then, when the serum (containing the anti-
bodies) is mixed with the antigen, a precip-
itate is produced. Hence, if a predator has
consumed the prey insect, this will be indi-
cated by the presence of a precipitate when
an extract from the predators gut is mixed
with the appropriate antibody serum.
Simple serological tests can be used to visu-
alize this reaction of the gut contents in
predatory insects (Boreham and Ohiagu,
1978; Southwood, 1978). However, these
tests are not much used today (Symondson
and Hemingway, 1997). The assay of choice
is now the enzyme-linked immunosorbent
assay (ELISA) due to its extreme sensitivity
and suitability for quantitative analyses.
Symondson and Hemingway (1997) list 21
such studies carried out in the last 15 years,
investigating diets of insects as widely dif-
ferent as Carabidae, Culicidae, Salticidae
and Pentatomidae. Greenstone (1996) high-
lights the advantages of the ELISA tech-
nique which is routinely capable of
detecting <10 ng of prey antigen.
A further renement for use with the
ELISA assay involves generation of mono-
clonal antibodies (Symondson and Liddell,
1996) which, because they can bind to a sin-
gle epitope (representing 810 amino acids)
on a target prey protein, means they can be
used to distinguish between very closely
related prey (e.g. different species of white-
y, Hagler et al., 1993) and particular insect
stages (e.g. Greenstone and Morgan, 1989).
Another biochemical technique that has
found an application in the analysis of
predator diets is that of electrophoresis.
Electrophoresis can be dened as the move-
ment of ions, or charged molecules, in a
uid under the inuence of an electric eld,
with positively charged particles moving to
the cathode and negative particles to the
anode (Symondson and Hemingway, 1997).
Thus the aim of the electrophoretic process
is to separate biological materials (usually
proteins) into clearly resolved bands that
can be visualized by staining on a gel.
Electrophoresis has been used to identify to
species the early stages of parasitoids (Wool
et al., 1978; Walton et al., 1990a,b) and for
detection of predation, especially where it
is difcult to gather sufcient prey material
for antibody production (Murray and
Solomon, 1978; Fitzgerald et al., 1986;
Solomon et al., 1996).
One other technique that is used to
identify the prey consumed by predators is
that of marking prey with radio-isotopes.
Potential prey are fed with radioactive trac-
ers (usually
32
[P]; Southwood, 1978) and
then exposed to natural predation (e.g.
McCarthy et al., 1980). James (1966) tagged
mosquito larvae with radioactive
32
[P] and
released them in woodland pools to iden-
tify their predators. Predators are collected
and assayed for the presence of radioactiv-
ity using a scintillation or Geiger counter,
or with autoradiography. Fourteen of 38
species of aquatic insects collected by
James (1966) ingested the tagged larvae.
The value of this technique lies in its
potential to measure the number of prey
consumed, because if individual prey carry
a similar burden of radio-isotope, the level
of radioactivity detected will identify the
number of prey consumed. In practice,
however, it is extremely difcult to make
this technique quantitative because there is
usually considerable variation in the level
of radioactivity of individual prey (Kiritani
and Dempster, 1973). Added to this, many
predators only consume part of their prey
and the rate of excretion of the radio-iso-
tope by a predator can depend upon the
amount of food it subsequently eats.
The real signicance of these biochemi-
cal assays is their potential for quantifying
predation rates. If a predator gives a posi-
tive reaction, then provided a number of
other conditions can be met predation rates
can be estimated. The other information
required includes the density of the preda-
tor and prey population, the length of time
taken for a predator to digest a given meal
208 Chapter 6
Chapter.6 10/7/00 11:22 am Page 208
(calculated from laboratory experiments)
and the proportion of predators sampled
that produced a positive reaction. If all this
is known then the minimum predation rate
can be obtained; Table 6.5 lists a number of
commonly cited predation rate equations
(Sopp et al., 1992).
The rst three equations assume that a
positive result from a predator gut analysis
represents a xed number of prey eaten
(which is normally unrealistic). The equa-
tion used by Nakamura and Nakamura
(1977) for predation of the chestnut gall
wasp (Drycosmus kuriphilus) by spiders,
assumed their predation was random and
thus it followed a Poisson distribution
(Equation 4, Table 6.5) to get around the
problem of a xed number of prey. Sopp et
al. (1992) took the whole process one stage
further through use of ELISA (but also
applicable to electrophoresis) which per-
mits the quantity of prey biomass to be cal-
culated. The value p, the proportion of
predators, is replaced by Q
0
/f where Q
0
is
the quantity of prey mass recorded in the
predators and f the average proportion of
the meal remaining. The value of f is cal-
culated from a digestion decay function
(Sopp and Sunderland, 1989; Symmondson
and Liddell, 1995). Although the Sopp et
al. (1992) method represents a signicant
advance on the other models it still
involves several assumptions (see Kidd and
Jervis, 1996) which could cause serious
errors if not satised.
6.6.3 Exclusion/inclusion methods
The majority of experimental methods
used in this context are of the exclusion
type rather than inclusion methods.
Exclusion usually involves the elimination
and subsequent exclusion of established
natural enemies from plots which are then
compared with another comparable set of
plots having natural enemy populations
that have been undisturbed (DeBach and
Huffaker, 1971). The natural enemies can
be eliminated from a plot by chemical or
mechanical means and then excluded by
mechanical means, usually cages.
Cages can cover part of a plant (e.g.
Chandler et al., 1988), a whole plant or
group of plants (e.g. Rice and Wilde, 1988)
and may take the form of muslin sleeves or
large wooden or metal framed mesh cages.
Cages must be used for the controls as well
as the treatment plots but the control cages
should allow access by natural enemies.
The mesh size of the cages may be varied
to allow access of some ying natural ene-
Biological Control 209
Table 6.5. Predation rate equations (from Sopp et al., 1992).
Equation Reference
Dempster (1960, 1967)
Rothschild (1966)
Kuperstein (1974, 1979)
Nakamura and Nakamura (1977)
Sopp et al. (1992)
r = Predation rate (biomass or numbers of prey).
r
1
= Predation rate measure in an insectary.
p = Proportion of predators containing prey remains.
d = Predator density.
t
DP
= Detection period.
Q
0
= Quantity of prey recovered.
1
2
3
4
5
r
pd
t
r pr d
r
pr d
t
r
p d
t
r
Q d
ft
DP
DP
DP
DP
=
=
=
=
( )
[ ]
=
1
1
0
1 log e
Chapter.6 10/7/00 11:22 am Page 209
mies but not others, or the sides left par-
tially open to allow entry (King et al.,
1985). The use of control cages reduces the
problem of differences between controls
and treatments due to variables other than
natural enemies. However, the effect of
cages on the interior micro-environment
and predatorprey behaviour remains one
of the primary concerns with this tech-
nique. Cages screen the plants, providing
shading and reducing wind speed while
increasing the temperature and humidity
relative to uncaged areas. Net cages used to
cover bushes of Euonymus europaeus
decreased light intensity by 18% and wind
speed by 24% (Way and Banks, 1968).
Temperatures within closed cages were
within one degree of eld temperatures in
a study conducted by Frazer et al. (1981).
The differences between cages and natural
conditions could affect the physiology of
the plants on which the insect pests are
feeding, the growth rate and activity of the
insect pest and hence their exposure to
predation (Luck et al., 1988). The cages
impede emigration of both the pest and
natural enemy and may increase predation
rates because the predator will repeatedly
search the same area beyond the point at
which they would normally have emi-
grated (Luck et al., 1988). A further draw-
back with cages is that predator free
controls are rarely free of predators.
Nevertheless, exclusion remains the most
appropriate experiment for testing whether
natural enemies have potential for control
or not (Luck et al., 1988). Exclusion cages
have proved effective in identifying the role
of predators in control of a number of differ-
ent pests, particularly aphids (Chambers et
al., 1983; Dennis and Wratten, 1991). The
pea aphid (Acyrthosiphon pisum) in alfalfa
was shown to be controlled by a complex of
predators each responding to changes in
aphid density (Frazer et al., 1981). Use of
cages to study the damson-hop aphid
(Phorodon humuli) and its predators on
hops provided conclusive evidence of the
controlling inuence of predators (Table
6.6), while cage studies carried out by Way
and Banks (1968) provided evidence that
natural enemies which attack Aphis fabae
on Euonymus europaeus and on its summer
hosts, were responsible for the common 2-
year cycle of aphid abundance. Likewise,
when excluded from plots by cages, the
ground living predators of Pieris rapae on
cabbages were shown to account for about
23% of larval mortality (Ashby, 1974).
Exclusion can also be obtained by hand
removal of predators, a technique that cir-
cumvents objections about manipulations
affecting pest and predator population
dynamics, since it should have no effect on
the environment. The technique is, how-
ever, extremely time consuming and labour
intensive. A group of workers would be
needed on a continuous basis, night and day
to hand remove any natural enemies which
settle on the leaves, twigs, branches, etc. of
the protected area. This must continue for
the duration of the test and long enough to
produce a large differential (van den Bosch
and Messenger, 1973). Such labour inten-
sive studies are really only applicable to
inactive predators, at reasonable densities
and those that are diurnally active or undis-
turbed by night light (Luck et al., 1988).
Pollard (1971) used the technique to remove
syrphid eggs and larvae from Brussels
sprout plants but found no differences
between the size of aphid infestations on
plants where syrphids had been removed
and the controls, at least for two out of three
210 Chapter 6
Table 6.6. Use of cages to study effects of predators on the damson-hop aphid.
Exclusion cages Open-ended cages Uncaged strings
Dates
Adults Nymphs Adults Nymphs Adults Nymphs
12 August 41 85 23 78 15 52
19 August 87 608 0 3 0 6
26 August 181 1652 0 8 0 1
2 September 870 6193 0 27 0 12
Chapter.6 10/7/00 11:22 am Page 210
sites, and concluded that the searching was
too inefcient for the technique to be of
value. Luck et al. (1988) contends that the
technique of hand removal deserves more
attention especially as a method of checking
for bias in other exclusion methods.
Ingress and egress barriers are used in
eld crop situations to allow ground
dwelling predators either into plots but not
out, or out but not in (ingress and egress
barriers respectively). The ingress barrier
should thus increase the number of preda-
tors in a plot, whereas an egress barrier
should decrease the number. Such barriers
usually consist of a small trench with an
overhang into this created by a board or
rigid felt material, which will allow insects
into the trench from both sides but out of
the trench only on the opposite side to the
overhang.
In studies carried out in New Zealand
using ingress and egress barriers to assess
predator effects on populations of Myzus
persicae on sugar beet, the peak number of
aphids in the egress plots was 150 times
greater than that in the control (Wratten and
Pearson, 1982). These results suggested that
relatively low numbers of predators in New
Zealand sugar beet could have a substantial
effect on keeping aphid numbers low.
Wratten and Pearson (1982) concluded that
the biggest drawback with this type of work
was the lack of information concerning
where the predation occurs and by which
species, and although pest numbers can be
correlated with predator numbers if pitfall
traps are used, immunological or elec-
trophoresis studies of predator gut contents
are required to establish a causal link.
Other types of barrier included grease
bands around tree trunks preventing entry
or exit for climbing predators and trenches
treated with insecticide. Straw treated with
DDT or aldrin placed in trenches has been
used as a means of preventing movements
of predators in and out of plots (Wright et
al., 1960; Coaker, 1965) and methods using
other insecticides could work equally well.
Biological Control 211
Case Study: The effects of predator exclusion and caging on cereal
aphids in winter wheat (Chambers et al., 1983)
Field cages were used to exclude aphid specic predators from small areas of
wheat during 1976, 1977 and 1979. The changes in numbers of aphids (Sitobion
avenae) inside and outside the cages were determined and related to changes in
the density of the predators and other factors.
The cages used to exclude the aphid specic predators were 1.8 m high, rec-
tangular (3 1.5 m) cages consisting of a tubular metal frame covered with poly-
ester netting (mesh size 1 0.3 mm, thread thickness 0.1 mm). The netting
extended below the soil surface to a depth of about 30 cm. Access to the cage
was possible via a vent held closed by Velcro strip.
Table 6.7. The mean number (0.5 m
2
) of predators (for the period in which they were active in
the eld) and the totals for each year. The ratio peak number/shoot is the ratio of the peak number
of aphids per shoot in the cages relative to the open plots (after Chambers et al., 1983).
Coccinellid
adults and Syrphid Chrysopid Ratio peak
larvae larvae larvae Total no. shoot
1976 20.22 8.92 3.02 32.16 6.41
1977 3.75 9.67 2.00 15.42 3.68
1979 0.45 0.64 0.27 1.36 2.82
*
*Corrected for different starting numbers in open and caged plots.
Chapter.6 10/7/00 11:22 am Page 211
212 Chapter 6
Different numbers of cages and plots were used during the three years and
articial infestations of the aphids were necessary to supplement natural infesta-
tions during 1977 and 1979. The aphids were counted weekly in 1977 and 1979
and every 10 days in 1976. Each plot was divided into four subplots and aphids
counted on a row of shoots each with a minimum of 40 shoots sampled per plot.
The subplots were examined by four different members of the sampling team to
minimize the variability due to counting error. Alate aphids were removed by
hand from the interior walls and roof of each cage in 1979 when they were not
removed in order to try and determine whether the population size was
increased by their subsequently returning to the plants.
The aphid specic predators were sampled each year at the same intervals as
the aphids but with a Dietrick vacuum suction sampler. The plant growth stage
was assessed weekly in open and caged plots.
Three phases of aphid population development were distinguished in this
experiment: an initial rapid growth phase, a divergence phase and a decline
phase (Fig. 6.12). During the growth phase, the aphid population both inside and
outside the cages increased at the same rate but during the divergence phase, the
aphid populations inside the cages continued to increase to a peak, while popu-
lations outside increased at a slower rate or decreased. The rate of decline of
populations outside the cages was faster than that inside the cages.
For each of the three years the divergence phase coincided with an increase in
the numbers of aphid specic predators and a negative association between
predator numbers and aphid abundance was apparent (Table 6.7). Up to a six
Fig. 6.12. The numbers of aphids on wheat in cages () and in open plots ( ) for the three
phases of population development: (I) the rapid growth phase; (II) a divergence phase; and (III) a
decline phase (after Chambers et al., 1983).
Chapter.6 10/7/00 11:22 am Page 212
Biological Control 213
times difference in aphid numbers occurred between predatorexcluded plots
and uncaged plots. These observed relations between aphid numbers and preda-
tor numbers (Table 6.7) are not proof of causal relations and it is not known
whether sufcient predators were actually present to account for the differences
between cages and plots. The effectiveness of the predator is partially dependent
on its per capita consumption rate of aphids. If the aphid population trends coin-
cided with expected population sizes based on a realistic consumption rate then
this would add force to the argument that the predators were responsible for the
observed differences between cages and open plots. Figure 6.13 shows that con-
sumption rates of between 50 and 60 aphids per predator per day would have
been required to bring about the observed differences between cages and plots.
This falls within the ranges of published values and was found to do so for the
other two years as well. It was concluded that predation was likely to be the
major cause of the differences between cages and open plots at the time of the
aphid population peak.
There was no difference in plant growth stages inside and outside the cages
during the three years and the divergence phase occurred at different growth
stages in each of the three years. This does not, however, rule out possible subtle
effects of the cages on the physiology of the wheat, or the aphid, acting only dur-
ing the divergence phase (Chambers et al., 1983).
Fig. 6.13. Aphid populations during phase II in cages ( ) and open plots ( ) and
the calculated population trends () based on different values for per capita daily consumption
rates of the predators (after Chambers et al., 1983).
Chapter.6 10/7/00 11:22 am Page 213
6.6.4 Insecticidal check method
The insecticidal check method makes use
of the physiological or ecological selectiv-
ity of insecticide application to kill a large
proportion of the natural enemies while
leaving the pest population unaffected. The
development of pest populations is then
compared in treated and untreated plots
and the difference provides an indication
of natural enemy effectiveness (DeBach
and Huffaker, 1971). This technique has
been successfully applied to studies in cit-
rus of the effects of natural enemies on the
long tailed mealybug, the cottony cushion
scale, the California red scale, the yellow
scale, the six-spotted mite (van den Bosch
and Messenger, 1973), leafhoppers and
planthoppers (Kenmore et al., 1985; Ooi,
1986), aphids (Milne and Bishop, 1987)
and thrips (Tanigoshi et al., 1985). Three
species of beetle, Stethorus spp., were
found to be important predators of
Tetranychus urticae in orchards in
Australia by the use of an insecticide to
which the mite was known to be resistant
(Readshaw, 1973), a small positive advan-
tage associated with the development of
insecticide resistance.
The insecticidal check method has the
advantage that it does not markedly alter
the environment or prey movements; it
does, however, have a number of disadvan-
tages. The use of insecticides may appear
simple but in practice a great deal of infor-
mation is required before an insecticide
can be chosen and applied selectively to
affect natural enemies alone. If physiologi-
cally selective insecticides are known there
is little problem with this approach, pro-
vided that sufcient is also known about
appropriate eld doses and application
rates. The problem with the ecologically
selective use of insecticides is the prior
knowledge that is required about the pest
and its natural enemies. Other problems
with this method include the stimulatory
effects of pesticides on the reproduction of
the prey, pesticide induced biases in sex-
ratio and pesticide induced physiological
effects on the plant (Luck et al., 1988).
Because the insecticides potentially stimu-
late arthropod reproduction, affect plant
physiology, and are difcult to apply selec-
tively, this method should only be used to
estimate crude predation rates.
6.6.5 Behavioural studies and prey
enrichment studies
Research programmes aimed at evaluating
the effectiveness of natural enemies
should ideally start with behavioural stud-
ies to immediately identify important
predators/parasitoids and their consump-
tion/parasitism rates (Luck, 1990). How-
ever, this is rarely done and if carried out
at all is left until the programme is well
established.
Behavioural studies can be carried out
in semi-natural conditions in the labora-
tory and can provide important informa-
tion about predator behaviour (Marks,
1977b; Gardner and Dixon, 1985) but it is
impossible to entirely recreate eld condi-
tions in the laboratory and this may lead to
important mechanisms being overlooked.
Field studies provide the opportunity to
identify some of the underlying behav-
ioural and ecological mechanisms involved
in the process of predation and parasitism;
as an approach, however, it does offer some
formidable experimental problems.
Field studies of insect behaviour are
highly labour intensive and data only
accrue slowly because of the difculties
involved in observing small invertebrates
at low densities and often also at night.
High densities of the predator have been
used in eld arenas to overcome the prob-
lems of trying to observe the beetle
Agonum dorsale at night (Grifths, 1982;
Grifths et al., 1985). Red torch light was
also used to aid observations after labora-
tory experiments had established that it
did not affect the behaviour of the beetle.
The problems associated with observations
of small highly mobile Hymenoptera are
even more horrendous, although Waage
(1983) at least showed that it was possible
using articially infested plants and two
observers with binoculars. Waage (1983)
collected and dissected the larvae of
Plutella xylostella observed during the
214 Chapter 6
Chapter.6 10/7/00 11:22 am Page 214
experiment to determine how many had
been parasitized. Similar collections and
dissections of articially infested insects
have been used to determine levels of para-
sitism (Way and Banks, 1968) and are gen-
erally referred to as prey enrichment
studies. They usually work best with non-
mobile stages such as eggs but care must be
taken to arrange them in realistic positions
on host plants (Luck et al., 1988).
6.6.6 Ranking of natural enemies
The ultimate aim of using experimental
methods to evaluate natural enemy effec-
tiveness is to identify those species that
have the most potential for use as biologi-
cal control agents, whether through intro-
duction, augmentation or conservation.
The approach taken rarely follows the pro-
tocol suggested in Fig. 6.9, rather, a piece-
meal approach develops with different
researchers in different institutes working
independently on a common problem, usu-
ally with a method appropriate to the
expertise and facilities available at any
given place. Apart from the fragmentation
of research among different workers one of
the reasons for this piecemeal approach
has been a preoccupation with, and the
need to develop, better techniques. While
the use of cages and barriers has long been
established the biochemical analyses inves-
tigating gut contents of predators and para-
sitoids are now making more detailed and
precise evaluation possible. Thus, a variety
of accurate and practical methods now
exist that permit a logical progression of
experimental procedures that will
inevitably provide the information neces-
sary to reliably rank natural enemies
according to their potential effectiveness as
biological agents.
6.7 Classical Biological Control
International agricultural trade is increas-
ing rapidly which is leading to an increase
in the rate at which new alien pests are
introduced (Waage, 1984; van Lenteren,
1995). In the USA, new species are added
to the fauna at a rate of between 11 and 13
per year (Hoy, 1985; Sailer, 1983) and with
new trade routes being opened such as the
NorthSouth trade in horticultural prod-
ucts, then pest-like aphids, whiteies, leaf
miners, thrips and mealybugs are likely to
spread into new areas at an alarming rate.
Classical biological control, which started
in the 1800s, remains a very effective
option today for controlling alien species.
As an approach classical biocontrol offers
permanent control that has few risks asso-
ciated with it and above all it provides a
highly cost-effective solution. A study of
seven biological control programmes in a
40-year period provided estimated benets
to costs of 4.5 to 1 (Simmonds, 1968). A
further seven programmes implemented
during the 1970s provided enormous bene-
ts obtained through savings on both
chemical control and crop yield gains
(Greathead and Waage, 1983). Tisdell
(1990) reports an average benet to cost
ratio of 10.6:1 for biological control efforts
in Australia, with maximum benets
exceeding 100:1. The biological control of
the cassava mealybug Phemacoccus mani-
hoti in Africa by introduction of a para-
sitoid from South America generated an
estimated benet to cost ratio of nearly
200:1 (Herren and Neuenschwander, 1991).
Thus, classical biological control offers an
economically attractive means of control of
exotic pests which will ensure its contin-
ued use as a primary control tactic. It has
also been suggested that it might be worth
trying to reattempt introductions against
past failures (Hoy, 1985) especially as new
information on geographic ranges, biosys-
tematics, biology and host preferences has
been accumulated, continually improving
the chances of selecting a more appropriate
control agent. Pimentel (1963) argues that
introductions should be used against
native pests as well which would further
increase the scope of biological control, for
instance control of Helicoverpa in
Australia (Michael, 1989) and the USA
(Powell, 1989).
The process of introducing an exotic
natural enemy can take between two and
Biological Control 215
Chapter.6 10/7/00 11:22 am Page 215
three years (Greathead and Waage, 1983)
especially in situations where there is little
recorded information available about the
pest and its native complex of natural ene-
mies. An ideal sequence of events involved
in the introduction of such natural enemies
is outlined in Table 6.8.
6.7.1 Target pest identication and area of
origin
Lindroth (1957) described ve criteria that
could be used to identify a pest as alien:
insect history, geography, ecology, biology
and taxonomy. Pschorn-Walcher (1977)
added a sixth: parasitology. In brief, the
rst of these criteria applies to the rare sit-
uation where the history of an introduction
has been well documented; geographical
criteria may be inferred when an insect has
a very patchy distribution over the range of
its host, perhaps because insufcient time
has elapsed to allow colonization. Insects
that have a strong association with the
human environment such as cockroaches
would be included as alien under the ecol-
ogy criterion. Host specicity would be a
character associated with biology while the
taxonomic criteria would apply to species
holding an isolated taxonomic position
with no close relatives among the native
fauna. The parasitological criterion would
include pests that had no obvious natural
enemy complex associated with them, sug-
gesting recent colonization (in evolutionary
terms).
Once a pest has been identied a litera-
ture review would be undertaken to nd
out as much as possible about the species,
its origins and its native natural enemies.
The basis on which a pest is identied as
alien should provide some information
about its centre of origin. The ever increas-
ing knowledge of insect taxonomy and dis-
tribution makes it increasingly easy to
216 Chapter 6
Table 6.8. A summary of steps normally part of programmes for introduction of natural enemies (from van
Driesche and Bellows, 1996).
Step Objectives
1. Target selection and assessment Identify target pest, dene biological, economic and social
attributes which relate to biological control; establish
objectives for introduction programme; resolve any conict
of interest
2. Preliminary taxonomic and survey work Determine current state of taxonomic knowledge of pest and
natural enemies; conduct literature review on natural enemies
of target species and relatives; survey in target area for any
existing natural enemies
3. Selecting areas for exploration Dene native home of target pest and other possible areas of
search for natural enemies
4. Selecting natural enemies for collection Choose which of various candidate natural enemies
encountered may be appropriate to collect for further study
in quarantine
5. Exploration, collection and shipment Obtain and introduce into quarantine candidate natural
of candidate natural enemies enemies
6. Quarantine and exclusion Process shipped material to destroy any undesirable organisms
7. Testing and selecting of natural Conduct research as necessary in quarantine on natural
enemies for additional work enemies
8. Field colonization and evaluation Release natural enemies in eld and monitor for establishment
of effectiveness and efcacy
9. Agent efcacy and programme Evaluate degree of achievement of overall programme
evaluation goals and objectives
Chapter.6 10/7/00 11:22 am Page 216
identify the native area of an invading
species (van den Bosch and Messenger,
1973). However, failure to identify cor-
rectly the centre of origin could mean the
importation and introduction of less effec-
tive natural enemies than could potentially
be available, since a mature, well-balanced
complex of natural enemies would only
exist in the native home area (Pschorn-
Walcher, 1977).
It is not necessarily a simple matter to
identify the centre of origin, often because
the insect(s) concerned have such vast
ranges; for instance, the alfalfa weevil
(Hypera postica) has a range that extends
across Europe, Africa, the Middle East and
Asia, while the codling moth (Cydia
pomonella) covers the Palaearctic region
(van den Bosch and Messenger, 1973). The
distribution of the target host plant or areas
having appropriate climates may provide
useful indicators. Information on the biol-
ogy of the rice stem borers Chilo suppres-
salis and Tryporyza incertulas provided
some circumstantial evidence for the area
of origin of these insects (Yasumatsu,
1976). C. suppressalis is distributed north-
ward from the tropics into the temperate
zone where it enters diapause during the
winter. It seems to prefer well drained pad-
dies and its larvae remain high in the stalk
at harvest. By way of contrast, T. incertulas
is distributed from the tropics north to the
southern regions of the temperate zone. It
appears to favour poorly drained situations
and its larvae bore towards the roots even
in deep water. Yasumatsu (1976) con-
cluded that these differences suggested that
C. suppressalis originated in the dryer tem-
perate area and T. incertulas in a damp
tropical situation.
6.7.2 Foreign exploration, selection and eld
evaluation
A great deal of information about pests and
their natural enemy complexes can be
obtained from the literature and correspon-
dence but generally foreign exploration is
necessary and desirable in order to achieve
a thorough check of the natural enemy
complex (DeBach, 1974) and to ensure that
a proper inventory of such complexes can
be prepared. First it is necessary to nd the
pest species in the countries in which it is
endemic and verify it taxonomically to
avoid the type of confusion that occurred
with the misidentication of the cassava
mealybug, Phenacoccus manihoti (Bennett
and Yaseen, 1980; Cox and Williams, 1981;
Neuenschwander and Herren, 1988). Then
an investigation into the natural enemy
complex of the pest can begin. Field stud-
ies are important in this context because it
is only under natural conditions that the
interactions between natural enemies and
their host can be truly evaluated. When
competition between guilds of parasitoids
or predators exists through an overlap in
resource use, e.g. larval parasitoids emerg-
ing from a host pupa may interfere with a
pupal parasite, then it is only through eld
studies that a hierarchy between and
within guilds can be established (Pschorn-
Walcher, 1977). A number of factors must
always be taken into account, such as the
degree of synchronization between the nat-
ural enemy and the host, host specicity
(although this has been questioned), physi-
ological tolerance, as well as genetic vari-
ability of natural enemy species. The value
of collecting natural enemies from different
areas is that individuals with a wider range
of physiological tolerances or adaptations
can be obtained, although there is always
the risk that these may turn out to be bio-
geographical or host races. There is a great
need for genetic studies in biological con-
trol to determine whether individuals
selected are genetically similar and
whether those imported remain so through-
out culturing and release (DeBach, 1974;
Caltagirone, 1985; Hoy, 1985).
6.7.3 Quarantine and mass production
The mass production of alien species is a
crucial aspect of every classical control
programme because sufcient numbers of
individuals of a suitable quality are needed
to make release and establishment possible
(Hopper et al., 1993). Culturing of natural
enemies is, however, a complex business
and each species will need to be reared for
Biological Control 217
Chapter.6 10/7/00 11:22 am Page 217
at least one generation to ensure hyperpar-
asitoids are screened for as a quarantine
measure. Quarantine presents a problem in
relation to the number of insects that can
be handled, since it is impossible to scruti-
nize and maintain very large numbers, the
process tends to restrict sample size and
hence genetic variability. Sample sizes and
genetic variability may also be restricted in
other ways during the introduction
process. In some cases the entire importa-
tion consists of a single small sample con-
taining a few individuals and at times it
has consisted of only a single female
(Messenger and van den Bosch, 1971).
Under such genetic bottle-necks, it might
be expected that the loss of adaptability
would be phenomenal and the success of
establishment threatened. However, theory
suggests that such loss is not great even
with severe bottle-necks (Nei et al., 1975)
and experimental evidence seems to sup-
port this (Bryant et al., 1986 a,b). Although
in cultures of aphid parasitoids, inadver-
tent selection resulted in low founder num-
bers, genetic drift and bottle-necks, factors
that can strongly inuence biological and
behavioural experiments (Powell and
Wright, 1988), such factors have important
implications for pre-introduction evalua-
tion, as well as for the chances of success-
ful establishment. The latter may also be
threatened by the conditions under which
the insects are maintained since most
insect rearing rooms are kept at relatively
high (within the physiological limits of the
insects) constant temperatures conditions
that are far from natural.
Many natural enemies have complex
life cycles making rearing difcult and on
occasion laboratory colonization can fail.
The ease of culturing tends to be one of
the factors that inuences the selection of
potential agents. Culturing requires the
simultaneous rearing of the host insect
pest and its associated plant host as well
as the natural enemy itself. A break in the
sequence of either of the rst rearing pro-
cedures and the natural enemy species
could be lost. For many species though,
the problems have been overcome and
thousands of individuals can be produced
for release.
6.7.4 Release and establishment
The rst step, prior to release, is to ensure
that the target pest is present in sufcient
numbers at an appropriate life stage at the
different release sites. Other factors that
need to be taken into consideration
include:
1. Ensuring that conditions at each
release site are optimal for establishment.
2. Use of an adequate number of natural
enemies in a given release.
3. An appropriate number of such
releases.
4. The use of a number of release sites
over the geographical and ecological ranges
of the pest (van den Bosch and Messenger,
1973).
If pesticides are used at the release site
or in the surrounding areas, then the suc-
cess of establishment may be affected. If
insecticides have to be used in the vicinity,
then pre-introduction studies should
include work on insecticide selectivity and
their application postponed in the immedi-
ate area and period after release. The suc-
cessful establishment might also depend
on other characteristics of the site such as
adult food availability and the presence of
secondary hosts if a multivoltine natural
enemy is released against a univoltine pest.
The presence of indigenous natural ene-
mies, especially hyperparasitoids, may
cause a problem by attacking the intro-
duced natural enemy. For example, in
south-western Nigeria, hyperparasitoids
destroyed up to 50% of all the cassava
mealybug mummies parasitized by
Epidinocarsis lopezi during the rst season
of its release (Neuenschwander and
Herren, 1988).
The number of individuals released on a
single occasion may also inuence the
chance of establishment. In Canada, an
analysis by Beirne (1975) of successes and
failures of introductions indicated that suc-
cessful establishment may be favoured by
release of large numbers of individuals.
218 Chapter 6
Chapter.6 10/7/00 11:22 am Page 218
Only 10% of introductions were successful
when a total of 5000 individuals or less
were released, 40% were successful when
introductions involved totals of between
5000 and 31,200, whereas 78% of introduc-
tions were successful where releases
involved over 31,200 individuals. A
sequence of releases is also important.
Again, in the analysis by Beirne (1975),
70% of species that were released more
than 20 times achieved successful establish-
ment compared with 10% when release
occurred less than 10 times. However,
Beirne (1975) warns that the decision
whether or not to continue with a sequence
of releases may be inuenced by the success
or failure of the earliest releases and that
this could have affected the values cited.
Releases are usually made at a number
of different sites selected not only for con-
ditions appropriate to establishment but
also to reect the range of environments
occupied by the host pest insect. The cli-
matic and ecological conditions at some
part of the site should be suitable to allow
establishment of the introduced natural
enemy. Once established, selection will
occur and those best adapted will survive.
Further genetic changes will occur if a nat-
ural enemy is able to extend its range into
all the environments occupied by its host.
6.7.5 Post-establishment evaluation
There are few examples in classical biolog-
ical control programmes where extensive
evaluation studies have been made after
the initial release and establishment of nat-
ural enemies. The successful introduction
of the natural enemy and its subsequent
control (or lack of it) of a pest may appear
self-evident and it is perhaps due to this
that funds are rarely made available for
properly conducted post-establishment
evaluation. After all, from a funding
agencys point of view, provided that an
introduction produces an adequate level of
control then the problem has been solved,
or if it has not, then it would appear
unwise to fund a project further, especially
if this will only tell you why it went
wrong. From a biological control practi-
tioners point of view, however, the need
for proper post-establishment evaluation of
a release programme is paramount. Such
studies are required to allow practitioners
to evaluate the true level of success that
has been obtained and to allow them to
gain an understanding of the processes
involved in the insect pest/natural enemy
interaction. This is especially important
when programmes fail at the release and
establishment phase, when the reasons for
failure need to be known for future
attempts and for generally increasing our
understanding in order to improve the like-
lihood of developing future successful bio-
logical control programmes.
One of the problems with advocating
such post-establishment evaluations is
associated with the type of work and the
resources required to carry out the job
properly. The most appropriate type of
evaluation involves obtaining data suitable
for constructing life tables, both before and
after establishment over a number of years
and at different sites. However, sufcient
funds are rarely made available for such
studies despite their obvious importance.
Biological Control 219
Case Study: Control of the cassava mealybug (Phenacoccus manihoti)
in Africa through the introduction of the exotic parasitoid
Epidinocarsis lopezi (Neuenschwander and Herren, 1988)
Cassava (Manihot esculenta) is the staple food of over 200 million Africans liv-
ing in the humid and subhumid tropics as well as an emergency food reserve in
many arid zones. Since its introduction into Africa over 500 years ago, cassava
had remained relatively pest free until the new pest Phenacoccus manihoti
appeared in Zaire in the early 1970s. This parthenogenetic pest spread rapidly
through Senegal and The Gambia in 1976, into Nigeria and Benin Republic in
1979 and by 1985 it had spread into Sierra Leone and Malawi and from there
Chapter.6 10/7/00 11:22 am Page 219
6.8 Inundation and Biopesticides
Biological control through inundation
involves the release of the agent in massive
numbers within a very short space of time.
The agent is usually not persistent, is
expected to kill the pest relatively quickly
and is usually only relevant to use of
pathogens, formulated as biopesticides,
which can be utilized as alternatives to
chemical insecticides. Viruses, bacteria,
fungi and entomopathogenic nematodes
have all been developed as biopesticides
and used for inundative control (Section
6.3.1). Such research and development has
been largely undertaken in the public
220 Chapter 6
onwards at a rate of 300 km a year. By the end of 1986, it had reached about 25
countries and covered about 70% of the African cassava belt. This major pest
was causing damage by stunting the growth points and defoliating the cassava
plants. Because of the extensive distribution of the pest, in largely mixed crop-
ping subsistence farming communities, the most appropriate means of control
appeared to be the introduction of an exotic natural enemy.
Cassava had been introduced into Africa from South America, hence
searches for natural enemies of the mealybug started there. The search began in
1977 and in 1981, Phenacoccus manhoti was nally discovered in Paraguay.
Among the parasitoids isolated from the mealybug was Epidinocarsis lopezi,
an endophagous, solitary encyrtid. This parasitoid has four larval instars,
passes the nymphal stage inside the mummied host mealybug and can
develop twice as fast as its host at 27C. The adult females are attracted to
mealybug infested cassava leaves and are thought to home in on the odours
(synomones) of the attacked cassava to locate the mealybug (Nadel and van
Alphen, 1986). Thus the parasitoid has a very good host locating capability.
After oviposition, a female will often feed on the host so although its reproduc-
tive capacity is limited, the parasitoid also causes mortality by host feeding
and mutilation of its hosts.
The rst releases of the parasitoid were made in Nigeria in 1981 and they
were found the following year to have become established. By March 1983,
Epidinocarsis lopezi was recovered from all sampled elds within 100 km of the
release point. Epidinocarsis lopezi was exported to 50 other sites in countries in
Africa. It is presently established in 16 countries with an estimated distribution
of 750,000 km
2
, which exceeds that of any other agent introduced into Africa for
the biological control of insect pests.
Post-establishment studies have included physical and chemical exclusion
experiments (Neuenschwander et al., 1986). A sleeve cage experiment on cassava
demonstrated that two months after articial infestation, the mealybug popula-
tions were 7.0 and 2.3 times lower on the growing tips covered with open cages
than on tips in closed cages that excluded most parasitoids. On similarly infested
but uncovered tips the mealybug populations were 24.3 and 37.5 times lower
and parasitism rates were higher. In the chemical exclusion experiment, an arti-
cially infested eld treated with weekly applications of carbaryl had a peak
mealybug population of 200 insects per tip. The adult Epidinocarsis lopezi had
been killed by the insecticide whereas in the untreated plots, parasitism was
higher and mealybug infestation lower than ten individuals per tip.
The control of cassava mealybug with the parasitoid Epidinocarsis lopezi rep-
resents one of the largest and most successful biological control programmes of
all time.
Chapter.6 10/7/00 11:22 am Page 220
sector (Waage, 1997; Dent, 1997b) and to a
large extent has treated the biological agent
much like a chemical active ingredient
with the subsequent expectation that it will
perform to the same standards. In almost
all cases this has not been possible and
hence all the shortcomings of biopesticides
relative to chemicals emerge, and few of
the benets (Waage, 1997). It is not surpris-
ing that living organisms do not make as
good chemical pesticides as chemicals do.
However, some pathogens have desirable
properties that chemicals do not and can-
not possess. For instance, nematodes have
a capacity to nd their pest host, to kill
them and then reproduce in them. All
pathogens have the capacity to reproduce
and hence produce another generation able
to attack and kill other individuals in a
pest population. This numerical response,
of which chemicals are incapable, has
rarely been exploited with biopesticides.
Opportunities exist to utilize these addi-
tional properties of host nding and repro-
duction which make biopesticide superior
to chemicals (Waage, 1997).
Biological Control 221
Case Study: Green Muscle a mycoinsecticide for locust and
grasshopper control (Neethling and Dent, 1998)
Locusts are major pests of agriculture worldwide against which large volumes of
chemicals are applied during outbreak years. An international research pro-
gramme called LUBILOSA has developed and commercialized a mycoinsecticide
trademarked Green Muscle for use against the desert locust (Schistocerca
gregaria), the brown locust (Locustana pardalina), the Moroccan locust
(Dosiostaurus maroccanus) and a number of Sahelian grasshoppers in Africa.
Green Muscle is based on the fungal pathogen Metarhizium anisopliae var.
acridum (previously known as Metarhizium avoviride). It is applied using for-
mulations of conidia in an oil suspension, allowing the product to be used under
dry and arid conditions. This ability to utilize a mycoinsecticide in arid condi-
tions represents a signicant advance in biopesticide technology since applica-
tion of mycoinsecticides has traditionally only been considered possible in more
humid environments.
Green Muscle achieves 90% kill in 721 days. In eld trials in West Africa it
has been demonstrated that in comparison with an ultra low volume formulation
of fenitrothion, the advantage of an initial high kill by the organophosphate has
been countered by the more sustained killing power of the mycoinsecticide. The
product also has a good toxicological and ecotoxicological prole. The acute oral
toxicity LD
50
in rats is >2000 mg kg
1
and the acute pulmonary LC
50
in rats is
>4850 mg m
3
. The fungal isolate is non-irritant and non-infective to mammals.
An extensive range of ecotoxicological tests have indicated only low or moderate
infectivity to some species of Isoptera, Coleoptera and some Hymenoptera.
Hemiptera, Dictyoptera and other Coleoptera and Hymenoptera are not infected
(Prior, 1997).
The mycoinsecticide Green Muscle provides an effective, environmentally
friendly alternative to chemical control for the management of locusts and
grasshoppers in Africa.
Chapter.6 10/7/00 11:22 am Page 221
6.8.1 Biopesticide development
Commercial companies have rarely
invested large sums of capital into the early
stages of development of biopesticide prod-
ucts (Jenkins et al., 1998). More often fun-
damental research and development up to
the stage of small scale eld testing is car-
ried out by public funded research labora-
tories and universities (Bowers, 1982).
Hence, the general knowledge base for
biopesticides is built up in a haphazard
way, through the uncoordinated efforts of
many scientists all pursuing their own
individual research objectives and inter-
ests. This contrasts markedly with the
more focused factory-like screening and
development process which characterizes
agrochemical R&D that produces new
chemical insecticides (Dent, 1997c). Private
sector R&D tends to be carried out within
a single organization involving multidisci-
plinary teams organized to address
problems in a step-wise process of devel-
opment. Public sector R&D tends to involve
a single institute and individual scientists
or small teams of insect pathologists work-
ing on related problems. Rarely will a team
include experts from all the different disci-
plines required to develop a biopesticide,
including exploration, identication and
screening of pathogen isolates, ecology,
production, storage, formulation and appli-
cation. The majority of research organiza-
tion involved in biopesticide development
have in-house expertise in exploration,
identication and screening of pathogens
but tend to lack skills and the necessary
facilities to undertake more complex stor-
age, formulation and application studies
(Harris and Dent, 1999). Investigations into
hostpathogen interactions by ecologists
are also rare.
The longest period of time in the life of
a product elapses during storage (Jones and
Burgess, 1998). During storage, biopesti-
cides must remain viable, with minimum
loss of potency, there should be no loss or
breakdown of the desired formulation
properties, e.g. clumping or caking of pow-
ders, occulation and settling of suspen-
sions, or breakdown of additives that
protect the pathogen against the environ-
ment. Production methods and packaging
can affect storage and the active ingredient
may need to be stabilized and puried to
reduce contaminants. The product needs to
be evaluated for its storage capability as
shelf lives usually need to be in the order
of one year (minimum). There is also a
need to be able to predict product perfor-
mance under the conditions that will be
experienced in actual use. The use of mod-
els may assist in this process (Hong et al.,
1998).
Selection of the appropriate formulation
for a biopesticide can improve product sta-
bility, viability and may reduce inconsis-
tency in eld performance (Burgess, 1998
for a review). Formulations are essential to
protect against environmental extremes of
moisture and temperature, as well as pro-
vide protection from UV light and desicca-
tion (Boyetchko et al., 1999). Sunlight
blockers and UV-absorbing compounds can
be added to formulations or starch encap-
sulation to increase survival and shelf-life
(Shapiro and Argauer, 1995; Shapiro and
Argauer, 1997). The formulation should
also be appropriate for the application
process for instance ensuring that the
particulate matter (e.g. fungal conidia) does
not clump and block the spray nozzle.
Application technology for biopesti-
cides is relatively under-developed (Dent,
1997c). The key requirement is to ensure
that the biopesticide is sprayed in such a
way that the droplet size is optimized for
pick-up by the insect and that the amount
of biological agent within each droplet is
sufcient to ensure infection and subse-
quent mortality. However, in order to
achieve this, application technologists con-
sider formulation properties in the spray
tank, atomization, transport to and
impaction on the target surfaces, distribu-
tion of the deposit and subsequent environ-
mental degradation, to biological effects
(Chapple and Bateman, 1997; Bateman,
1999).
Studies of the ecology of the
insectpathogen interactions can provide
valuable information that can be used to
222 Chapter 6
Chapter.6 10/7/00 11:22 am Page 222
dene a good use strategy for the biopesti-
cide. Information about insect feeding
behaviour (Thomas et al., 1997, 1998) and
the thermoregulatory behaviour of the
insect after infection (Blanford et al., 1998;
Blanford et al., in press) and secondary
cycling of the biocontrol agent (Thomas et
al., 1997) forms the basis for development
of an appropriate use strategy for the
biopesticide. The secondary cycling aspects
of pathogen biological control agents set
biopesticides apart from chemical insecti-
cides and offer many opportunities for
longer term benets from biological control.
6.8.2 Production of pathogens
The main reason for Bt predominance in
biocontrol is that it is easy to produce by
simple fermentation techniques in rela-
tively inexpensive media for controlling a
broad range of hosts (Guillon, 1997). The
scale-up from the laboratory to the indus-
trial scale of pathogens remains one of the
biggest constraints to the future success of
biopesticides. Industrial scale processes
exist for Bt, entomopathogenic nematodes,
the fungi Beauveria spp., Metarhizium
spp., Paecilomyces spp. and Verticillium
spp. and for a range of nucleo-polyhedrosis
and granulosis viruses (e.g. Guillon, 1997).
The manufacture of a biopesticide involves
producing sufcient quantities of the active
ingredient at an economic cost, of consis-
tent quality and compatible with the
selected formulation and application
equipment (Jenkins et al., 1998).
Production systems can be developed for
research use (mainly laboratory studies and
small scale eld trials) but to scale up for
operational trials or actual use, the produc-
tion parameters need to be dened and
optimized. This necessitates an under-
standing of the temperature, airow,
humidity and nutrient requirements for
optimal production, drying and extraction
processes. Commercially B. thuringiensis is
produced using batch deep liquid fermen-
tation techniques and it is regarded as an
easy organism to produce. B. sphaericus
has similar media requirements but pilot
batches of a commercial product have
given variable results (Burgess, 1982). The
ease with which the insecticide can be pro-
duced will obviously affect its commercial
viability. One of the drawbacks of the pro-
duction of B. popilliae insecticide has been
the difculties of large scale production
since this bacterium can only be produced
in vivo. The problem is exacerbated further
as the beetle larvae are difcult to rear in
the laboratory.
The problem with viruses is that they
have to be produced in vivo which tends to
be labour intensive and hence costly,
although some cell culture work shows
promise. Large scale rearing of Lepidoptera
larvae is possible using articial diet but
articial diets are not available for all
insect pests which therefore have to be
reared on host plant material. The high
costs of these production techniques are
partly offset by the high yield of inclusion
bodies from each larva; approximately 25
larvae provided sufcient inclusion bodies
to spray and protect 0.4 ha of cotton
infested with Helicoverpa zea (Ignoffo and
Couch, 1981). Guillon (1997) provides pro-
duction costs and methods which demon-
strate that such industrial systems can
produce granulosis virus at an economi-
cally viable cost.
6.8.3 Use of biopesticides
There is now a considerable body of
research results which testify to the poten-
tial of biopesticides, especially for bacteria,
viruses, entomopathogenic nematodes and
fungi. However, converting these results
into viable products has proved a long and
arduous task. Despite this, research has
now reached a stage where the prospect for
new products looks very promising. A
number of technical breakthroughs such as
ULV formulations and improved storage
capability for fungi, are opening up new
market opportunities (see Case Study),
viruses are increasingly being evaluated
and used on a wider scale (e.g. Bell and
Hayes, 1994; Hayes and Bell, 1994), impor-
tant niche markets are being created for
nematodes (e.g. Gouge and Hague, 1993;
Renn, 1995; Gouge et al., 1997) and fungal
Biological Control 223
Chapter.6 10/7/00 11:22 am Page 223
products are now more increasingly avail-
able for pests ranging from the European
corn borer and whitey (Guillon, 1997) to
locusts and grasshoppers (Neethling and
Dent, 1998). Overall, the market for biopes-
ticides has grown c. 80% in four years
(19911995; Georgis, 1997) and although a
slower growth is anticipated by 2000 the
market for biopesticides is expected to
exceed 141 million (Wood MacKenzie
Consultants Ltd, 1995).
6.9 Augmentation and Inoculation
with Natural Enemies
In situations where natural enemies are
absent or population levels are too low to
be effective, numbers may be augmented
by the release of laboratory reared insects.
Where augmentative control is used, there
is no interest in long-term stability but
merely in the suppression of pest numbers
below the economic threshold (van
Lenteren, 1986) and multiple releases may
be needed because the control is only tem-
porary. With inoculative releases control
will be seasonal or for the duration of the
crop. The view that augmentation of nat-
ural enemies should be given the lowest
priority in biological control research
(DeBach, 1974) and that it should only be
introduced where the level of control
desired is so low that it may be impractical
by any other method (DeBach and Hagen,
1964) is now totally invalid. A great deal of
R&D that has been carried out over the last
20 years is currently yielding benets with
an increase in both the natural enemies
commercially available for augmentative
control and the number of commercial
companies producing natural enemies for
sale. In 1968, there were two commercial
biological control companies in Europe
whereas today there are 26 in Europe and a
total of 64 companies worldwide (van
Lenteren et al., 1997). At this time, there
are about 100 biological control agents
available with about 30 benecial species
making up 90% of the total sales (van
Lenteren, 1997).
Augmentative control has been used
successfully in over 14,000 ha of
glasshouse crops for a number of insect
pests (van Lenteren and Woets, 1988; van
Lenteren, 1995). This successful use of aug-
mentative releases in glasshouses has been
due to a number of factors. Glasshouses
represent closed or nearly closed systems
in which one or only a few major pests
exist, the glasshouse environment can be
controlled and the crops grown are of high
value and intensively produced. Resistance
to some chemical insecticides has also pro-
moted interest in the technique.
Natural enemies suitable for release in
an augmentative release programme in
glasshouses and other systems should pos-
sess a number of attributes. The natural
enemy development should be synchronous
with the pest, so that the adult natural
enemy is available when suitable host stages
are present (although multiple releases can
alleviate this problem). The natural enemy
must reproduce, develop and migrate under
the conditions of release (van Lenteren,
1986). Further desirable attributes include
ease of culture, preference for pest species if
a non-pest alternative is present, a potential
maximum reproductive rate equal to or
greater than that of the pest, and a good
response to pest density. The natural enemy
should also not attack other benecials.
The two most celebrated examples of
successful augmentative release of natural
enemies in glasshouses are those of
Encarsia formosa against the whitey
Trialeurodes vaporariorum and the use of
the phytoseiid mite Phytoseiulus persimilis
to control the two spotted spider mite
Tetranychus urticae. P. persimilis is the
most widely available species of all mar-
keted natural enemies in a survey carried
out by van Lenteren et al. (1997). It is pro-
duced by nine companies in even larger
quantities than E. formosa. P. persimilis
is widely used in control of T. urticae
attacking tomato, cucumber, egg plants
(aubergines), sweet peppers and gerbera
crops (van Lenteren, 1995).
In eld crops, the species of natural
enemy that has been used more than any
224 Chapter 6
Chapter.6 10/7/00 11:22 am Page 224
other are the egg parasitoids of the genus
Trichogramma. Today, mass release of
Trichogramma has achieved signicant
results especially in cotton in the USA,
Mexico and the former USSR and in India
for the control of cotton bollworms and
sugarcane borers (King et al., 1985;
Manjunath, 1998). It is the costs of produc-
ing the natural enemies and releasing them
at the required intervals that limits the use-
fulness of the augmentative approach. The
situation with inoculative releases is not as
marked because fewer releases are neces-
sary. Also the rearing of insects for
augmentative releases needs to be a com-
mercially viable proposition, whereas with
inoculative releases, particularly those
aimed at controlling the spread of a pest
species (e.g. Dendoctronus micans in
Europe), the funding is provided by gov-
ernmental organizations.
6.9.1 Mass rearing of natural enemies
for release
The augmentation approach is restricted to
natural enemies that can be mass reared
and for which suitable storage and packag-
ing methods exist or can be readily devel-
oped. Most natural enemies are reared on
their natural hosts which means the devel-
opment of a triple phase programme where
(i) the host plant is produced for (ii) the
pest insects, and (iii) the natural enemy is
then propagated onto the pest insect. Such
programmes can be quite involved and
pose a great challenge to the insectary spe-
cialist (van den Bosch and Messenger,
1973). For several natural enemies, mass
rearing on the natural host is either too
expensive or impossible because of the risk
of contamination with pest organisms or
with other pests or diseases. In the circum-
stances, articial host media or unnatural
hosts may provide the only alternative (van
Lenteren, 1986). Articial diets have the
advantage that they probably reduce costs
of production, whereas an unnatural host
is not normally attacked by the natural
enemy because of some isolating mecha-
nism, but it can serve as a host in the insec-
tary (Morrison and King, 1977). The
disadvantage of using unnatural hosts (and
articial media) is the possibility that the
natural enemys host preference will be
altered, rendering it useless for augmenta-
tion purposes, although experiments to test
this phenomenon have failed so far to
show any change in effectiveness when
released against the natural host.
When a mass rearing unit is established
the initial stock should not be less than
1000 individuals and should consist of
genetically diverse material (van Lenteren
and Woets, 1988). This high level of initial
stock material is important to reduce the
founder effect where the genetic makeup
of the isolated population represents only
a small fraction of the original genetic
variability present in the parent popula-
tion (Mackauer, 1972). The larger the
founder number and the range of environ-
ments/areas from which the insects were
collected, the greater the reduction in the
founder effect and the more genetically
diverse and representative the insectary
population. Once a colony has been estab-
lished, it is very important to ensure that
inbreeding is kept to a minimum and
where possible to maintain random mating
between family lines. The selection for
insects suited for insectary condition can
be prevented, or at least reduced, if the
insectary environment is similar to natural
conditions. However, there is a tendency
for insectaries to be maintained at constant
temperature and humidities with a xed
photoperiod and light intensity. Not sur-
prisingly, these conditions are incompati-
ble with rearing insects representative of
wild populations. Other conicts between
rearing and release requirements in insects
for glasshouses are listed in Table 6.9. The
role of insect behaviour and its effects
under selection in the insectary is also a
major factor inuencing the quality of the
reared insect that is not normally taken
into account (Boller, 1972). Quality in
insectaries is normally divided into four
components: adaptability; host selection;
sexual activity; mobility. Most routine
measurements of traits are production
orientated, e.g. percentage parasitism,
Biological Control 225
Chapter.6 10/7/00 11:22 am Page 225
emergence success, egg production, while
traits more directly related to behavioural
performance such a diurnal rhythmicity,
ight propensity and genetic variation are
rarely measured (King et al., 1985). There
is perhaps a need to move away from pro-
duction orientated evaluation of efciency,
in terms of number of insects produced per
monetary unit, to a production/quality
approach where the success of the project
is evaluated in terms of the relations of
responses between natural insects and
reared insects to a given objective (Boller,
1972).
One of the other key factors in the suc-
cess of mass rearing of natural enemies for
augmentation is the ability to store the
insects for relatively long periods; this is
required to allow some kind of buffer for
changes in demand. If storage were possi-
ble, continual rather than seasonal labour
could be used and reserve quantities of
insects used to counteract periods of low
production or high demand (Morrison and
King, 1977). Low temperatures that reduce
development rates have been the most
common method used to facilitate storage
but often not without some loss of insect
vigour or viability (Deng et al., 1987;
Gilkeson, 1990). Continued research is
needed in this area.
The packaging and shipping of natural
enemies it also not without its problems
(e.g. Morewood, 1992). With augmentative
releases in glasshouses, the frequency of
dead or injured natural enemies is a seri-
ous problem and various types of packag-
ing have been used, from cut leaves in
boxes to insect coated sticky pads, or loose
insects in sealed plastic containers. The
least vulnerable stages such as eggs and
pupae are normally most appropriate but
even these are subject to large losses and
packaging and distribution problems
remain one of the main restrictions to the
application of this method of biological
control.
For further information on mass rearing
techniques for natural enemies in augmen-
tative release programmes readers should
refer to Morrison and King (1977), Laing
and Eden (1990) and Gilkeson (1992).
6.9.2 Costs and benets
The cost of reared natural enemies must be
judged in terms of the value of the crop
protected by using the agent and in com-
parison to the cost of competing pest con-
trol options such as chemicals (van
Driesche and Bellows, 1996). Use of T.
cryptophebiae against citrus pests in South
Africa is economically viable even though
the level of pest control is less than 60%
(Newton and Odendaal, 1990). This is
because the chemicals used provide only
similar levels of control and are at least
226 Chapter 6
Table 6.9. Comparison of conditions for mass rearing of parasitoids and those of the release environment in
the glasshouse (van Lenteren and Woets, 1988).
Aspect Mass rearing Greenhouse
Host plant Usually different
Host Usually the same
Host density High Low
Dispersal Not appreciated Essential
Ability to disperse Small Large
Population size Minimal size sufciently large
Temperature Temperature higher in mass rearing
Humidity Usually the same
Pesticides Not applied Applied
Chapter.6 10/7/00 11:22 am Page 226
twice the cost. In Europe, the costs of bio-
logical control agents for use mainly in
protected crops and horticulture have
proved economic (Table 6.10; van Lenteren
et al., 1997) and compare favourably to
costs of chemical insecticides (van
Lenteren, 1989). Augmentative control
seems to have proved viable in high value
horticultural or agricultural crops and
especially where there is a premium for
chemical free produce.
Biological Control 227
Case Study: Augmentative releases of Encarsia formosa to control the
greenhouse whitey Trialeurodes vaporariorum
Encarsia formosa is an aphelinid parasitoid of the greenhouse whitey
Trialeurodes vaporariorum which is used extensively in greenhouses for aug-
mentative control in tomato, sweet pepper and cucumber in both the UK and
Netherlands (King et al., 1985). E. formosa is a parthenogenic species and each
female can oviposit an average of 50 eggs (Parr et al., 1976). These are oviposited
within the third and fourth instar T. vaporariorum and the pre-pupa (Vet et al.,
1980). The adult feeds on the hosts body uids as well as honeydew.
Table 6.10. Average price (and range; in US$) for the most commonly sold organisms used to control pests
in Europe (from van Lenteren et al., 1997)
Biological control No. of Species life stage Average
organisms companies shipped price per unit (range)
Amblyseius californicus 3 Mixed life stages $0.031*
Amblyseius cucumeris 5 Mixed life stages $0.0094 ($0.00032$0.0019)
Amblyseius degenerans 5 Mixed life stages $0.1 ($0.065$0.147)
Aphelinus abdominalis 3 Adult $0.98 ($0.092$0.104)
Aphidius colemani 5 Mummy $0.035 ($0.024$0.049)
Aphidius ervi 3 Mummy $0.13*
Aphidoletes aphidimyza 4 Pupa $0.0318 ($0.0243$0.0485)
Chrysoperla carnea 2 Egg $0.0209*
Cryptoleamus montrouzieri 5 Adult $0.472 ($0.362$0.588)
Dacnusa sibirica 3 Adult $0.026*
Delphastus pusillus 3 Adult $0.706*
Diglyphus isaea 5 Adult $0.204 ($0.065$0.349)
Encarsia formosa 7 Pupa $0.0081 ($0.0028$0.016)
Eretmocerus californicus 3 Pupa $0.010 ($0.0065$0.013)
Harmonia axyridis 2 Adult Price not known
Hypoaspis miles 4 Mixed life stages $0.00097 ($0.00058$0.0014)
Leptomastidea abnormis 3 Adult $0.263 ($0.141$0.436)
Leptomastix dactylopii 5 Adult $0.246 ($0.141$0.436)
Leptomastix epona 4 Adult $0.343 ($0.165$0.441)
Macrolophus caliginosus 5 Adult $0.179 ($0.129$0.226)
Orius insidiosus 4 Adult $0.0404*
Orius laevigatus 5 Adult $0.0725 ($0.0404$0.105)
Orius majusculus 5 Adult $0.0865 ($0.0404$0.114)
Phytoseiulus persimilis 9 Mixed life stages $0.1013 ($0.00647$0.17647)
Trichogramma brassicae 2 Parasitized host egg $0.0003* (per unit)
$102.79* (per ha)
Trichogramma evanescens 2 Parasitized host egg $60.35* (per ha)
*
Price given by one producer.
Chapter.6 10/7/00 11:22 am Page 227
228 Chapter 6
Fig. 6.14. A system for producing both whitey and its parasite (after Scopes and Biggerstaff,
1971).
A prerequisite for any augmentative release programme is the ability to pro-
duce the natural enemy in sufcient numbers at economic costs. The economic
feasibility of mass rearing E. formosa to control the whitey in cucumber crops
in the UK was calculated rst by Scopes (1969). The methods used were further
expounded by Scopes and Biggerstaff (1971) (Fig. 6.14) and have since been
developed commercially for 20 years (van Lenteren, 1992a). Nicotiana tabacum
is used exclusively for the production of both the pest and parasitoid with a pro-
duction cycle of between 36 and 40 days for multiplication and distribution to
nurseries of the adult parasitoid. During the summer when the adult whiteies
are most abundant, the production of honeydew and subsequent development of
sooty mould can be a problem. Spraying plants with water twice weekly removes
much of the honeydew.
The damage that the whitey cause to the crop plants can be direct physical
damage or indirect damage through the accumulation of honeydew, resulting in
the development of sooty moulds (Cladosporium sphaerospermum) which
reduce photosynthesis and respiration (Vet et al., 1980). The economic damage
threshold is represented by the number of whitey that produce the quantity of
honeydew that is insufcient to produce damaging levels of sooty mould
(Hussey and Bravenboer, 1971). The release of E. formosa to control T. vaporario-
rum is based on one of two approaches, either the classical method or the drib-
ble method.
The classical method involves the introduction of the whitey into the crop to
ensure an even distribution and level of infestation and then subsequently E. for-
mosa is introduced at rates totalling 120,000 parasitoids per hectare at the most
appropriate time, dependent on the rate of scale development and temperature
(Parr et al., 1976). The dribble method involves the introduction of E. formosa
after whitey have been observed in the crop and multiple introductions at set
intervals after this. The classical method was found to give more predictable
Chapter.6 10/7/00 11:22 am Page 228
Biological Control 229
results in both cucumbers and tomato crops (Gould et al., 1975; Parr et al., 1976)
but the establishment of whitey in the crop prior to parasitoid release was not
acceptable to growers. Hence, the dribble method has been the most widely
adopted technique. The use of E. formosa to control the greenhouse whitey has
proved to be an outstanding success so that now a number of companies exist to
supply commercial growers throughout the season with the required numbers.
Case Study: The use of inoculative releases of Rhizophagus grandis to
control the greater European spruce beetle (Dendroctonus micans)
(Grgoire et al., 1990)
Dendroctonus micans inhabits the Eurasian conifer forests from eastern Siberia
to central France and the UK. The pest is still extending its distribution with an
estimated 200,000 ha of forest suffering from outbreaks in invaded areas in the
UK, France, USSR and Turkey. D. micans invaded the French Massif Central dur-
ing the 1970s and is still spreading from the north to the south-west. The inocu-
lations reported here were made in this area. Rhizophagus grandis was
considered a suitable candidate for inoculative releases to control D. micans for a
number of reasons. Firstly, R. grandis is very common and abundant in the inner
part of the bark beetles range and was considered to be responsible for maintain-
ing low population levels. Secondly, eld and laboratory work had shown that R.
grandis had characters which indicated its potential value as a control agent, an
extraordinary capacity to locate its prey, a exible phenology, a high fecundity,
matching that of D. micans larva during their development, and pairs of R. gran-
dis and their broods can reduce a brood of D. micans by at least two-thirds.
The rearing method for R. grandis was rened from the use of D. micans
infested logs to the use of cylindrical clear polystyrene boxes containing D.
micans and rehydrated spruce bark powder. Under room temperatures, 1.53.5
young adult R. grandis could be produced per D. micans larva with a generation
time of 6080 days; 3070 young adults of R. grandis were produced from each
adult female. Some 84,000 predators have been produced since 1983.
The criteria for release of the predators were 50 pairs of adult beetles at the
base of each attacked tree if the site contained less than ten attacked trees per
hectare, or at least 5001000 pairs per site if there were more than ten trees
attacked per hectare. A total of 2350 R. grandis was released in 1983, 8500 in
1984, 16,350 in 1985 and 41,800 in 1986 in about 50 sites over an area of 5000
km
2
. Six release sites have been surveyed to assess the establishment of the
predator and R. grandis has been found in all of them. The lowest colonization
after one year was 14.4% of brood systems but generally there was an increase in
colonization each year. In one area, the colonization rate progressed from 17% in
1983 to 72% of the brood systems colonized in 1986. The maximum colonization
rate over all sites was 75%, which provides a substantial level of control. D.
micans is still progressing south-westwards and so further mass rearing and
release of R. grandis are required, but the inoculative method has proved suc-
cessful in keeping control of the pest within acceptable limits.
Chapter.6 10/7/00 11:22 am Page 229
6.10 Conservation Biological
Control
Conservation biological control attempts to
make use of indigenous natural enemies by
manipulating the environment in such a
way that their activity and effectiveness as
biocontrol agents is enhanced. The premise
on which conservation biological control is
based is that the intensication of cropping
systems has reduced the effectiveness of
indigenous natural enemy populations and
that this can be compensated for by appro-
priate manipulation of the habitat. The
process of intensication in Western
Europe, for instance, led to the removal of
hedges to produce larger elds (Davies and
Dunford, 1962; Edwards, 1970), a process
that continues today (Greaves and
Marshall, 1987). In addition, the use of her-
bicides to control weeds in the remaining
hedgerows has reduced their quality as
eld boundaries in terms of natural enemy
conservation. Conservation biological con-
trol, to a large extent, is involved with the
management of the eld habitat to recreate
the essential aspects required to maintain
the effectiveness of natural enemies with-
out disrupting the efciency or protability
of farm operations. Habitat manipulation
techniques involve creating habitat refuges
such as headlands, hedgerows or grass-
banks (e.g. Thomas et al., 1991 see Case
Study) which serve as recolonization foci
or providing key resources such as food or
nectar which attract natural enemies to
their site of action (Lvei et al., 1993).
Such relatively small discrete features such
as strips of food plants and overwintering
shelter may be thought of as micro-eco-
tones, zones where, through the provision
of the right kinds of physical and oral
diversity, pest suppression can be achieved
(Gurr et al., 1998).
6.10.1 Habitat refuges
Invertebrate predators and parasitoids in
arable land occupy an unstable, fragmented
and often hostile environment. Without an
ability to leave an arable eld in the
autumn after harvest for example, many
species will be exposed to the extremes of
burning, ploughing, harrowing, drilling
and autumn applied pesticides in a habitat
low in food resources and in its range of
available microclimates. Hence, insect nat-
ural enemies require both refuges from
such perturbations and reservoirs from
which decimated populations can be
replenished. Alternative ecotones, which
can substitute for lack of hedgerows or
poor quality hedgerows that remain,
revolve around management of headlands,
existing hedgerows or provision of beetle
banks. Studies have shown that higher
winter densities of predators are found in
eld boundaries with deeper soil, greater
vegetation height, having an eastwest ori-
entation, lower soil moisture and warmer
mean daytime temperatures (Dennis et al.,
1994). Higher overwintering survival of
natural enemies provides a greater number
of individuals that can colonize the crop
in the spring and raises the natural
enemy : pest ratio in favour of the natural
enemies. The creation of linear island habi-
tats in the centre of cereal elds, and thus
reduction of the eld size (Thomas et al.,
1991), has been shown to produce in two
years densities of polyphagous predators
up to 1500 m
2
which greatly exceeds den-
sities previously recorded in eld margins
around the UK (Thomas et al., 1992). In the
USA, uncultivated corridors of grasses
and other herbaceous plants within soy-
bean elds reduced populations of
Empoasca fabae (Rodenhouse et al., 1992).
Predator populations were higher in the
corridors than in the crop itself. Hence the
effectiveness of predators such as carabids
depends not only on their ability to pene-
trate elds from overwinter sites in eld
boundaries but also on movement on a
larger spatial scale, from one eld to
another (Frampton et al., 1995). The rates
of movement of predators between elds
will in some cases be impeded by eld
boundaries but the degree to which they
act in this negative way is not clear and it
is likely that throughout the year the rela-
tive importance of their roles may change.
230 Chapter 6
Chapter.6 10/7/00 11:22 am Page 230
6.10.2 Food sources
Several species of parasitoid wasps and
hoveries require nectar and/or pollen as
food to provide energy and protein for egg
maturation (Schneider, 1948; Jervis and
Kidd, 1986). On the basis of this, it is rea-
sonable to assume that an increased avail-
ability of suitable owers in or near crops
can increase natural enemy effectiveness
(Powell, 1986). Hence, a number of studies
have tried to identify suitable owering
plants to include in eld boundaries to
attract parasitoids and predators (Zandstra
and Motooka, 1978; Lvei et al., 1993;
Hickman et al., 1995; Cowgill et al., 1993).
A number have been able to establish that
the presence of suitable owering plants
has increased the incidence of natural ene-
mies (Molthan and Rupert, 1988; von
Klinger, 1987). Few, however, demonstrate
subsequent reduction in pest populations.
Numbers of the bean aphid Aphis fabae in
sugar beet plots drilled with tansy leaf
(Phacelia tamacetifolia) between rows or at
plot edges were reduced by syrphids com-
pared with populations in control plots
(Sengonca and Frings, 1989).
Manipulation of habitats can improve
the availability of alternative hosts or prey
for important natural enemies. Natural ene-
mies that are not host or prey-specic will
search for alternative food or hosts in the
absence of the pest prey or host species. If
these alternative sources of prey are not
found in the vicinity of the cropping system
then there will be a tendency for the natural
enemies to disperse away from the crop.
This may mean that when the pest popula-
tion in the crop starts to increase, the nat-
ural enemies that could potentially reduce
the rate of growth are not within the crop
vicinity and a delayed return, perhaps later
in the season, may be too late for them to
signicantly affect the pest population. The
Biological Control 231
Case Study: Beetle banks as overwintering habitats (Wratten et al.,
1990; Thomas et al., 1991, 1992)
Beetle banks are grass-sown (e.g. Dactylus glomerata) earth ridges at the centre of
cereal elds which recreate those aspects of existing eld boundaries that favour
high overwintering densities of polyphagous predators. Destructure sampling of
these strips of grass during their second and third winters following establish-
ment revealed high predator densities. Two highly ranked predators of cereal
aphids were particularly prevalent, Dometrias atricapillus and Tachyporus hyp-
norum. Further studies indicated food supply to be important for both predator
species during the winter period and that the grass banks provided temperature
stabilizing effects throughout winter. The raised earth banks which can be 0.4 m
high, 1.5 m wide and 290 m long were rst shown to be economic in 1988
(Wratten, 1988). Figures updated in 1994 would also indicate that the costs of
establishment (including grass and labour costs) and loss of cereal crop due to
the beetle banks are outweighed by the savings on pesticides if the enhanced nat-
ural enemies prevent a cereal aphid outbreak. The combination of labour costs
for bank establishment (12 days) with yield loss due to land taken out of cereal
production (c. 30 or US$50 assuming the average yield of 6 tonnes ha
1
@ 110
or $180 tonne
1
), together with the cost of grass seed (5 or $8), would amount to
approximately 85 or $140 in the rst year for a 20 ha eld of winter wheat.
There would be no establishment costs in subsequent years only gross yield lost
due to the area occupied by the bank (30 or $50 per year). An aphid outbreak
kept below a spray threshold by the action of the natural enemies from the beetle
bank could save 300 or $495 per annum in labour and pesticide costs for a 20
ha eld. Alternatively, prevention of an aphid induced yield loss of 5% could
save 660 ($1090) for a eld the same size (Wratten and van Emden, 1995).
Chapter.6 10/7/00 11:22 am Page 231
presence of a secondary prey source has
been shown to be important in a number of
cases. Anthrocorid bugs (Orius majusculus)
which are used for the control of western
ower thrips (Frankliniella occidentalis)
have been shown to benet from the pres-
ence of alternative prey species in situa-
tions where thrips are scarce (Brodsgaard
and Enkegaard, 1997). In rice systems, the
egg parasitoids Anagrus spp. and Oligosita
spp., which are important control agents for
rice planthoppers, use some delphacids as
alternative hosts. The delphacids survive in
non-rice habitats such as eld bunds, irriga-
tion canals and roadsides (Yu et al., 1996).
Also in rice systems, Settle et al. (1996)
hypothesized that the abundance of alterna-
tive detritivore prey for generalist predators
give these natural enemies a head start on
later developing pest populations leading to
a stability in rice ecosystems by decoupling
predator populations from a strict depen-
dence on herbivore populations. The early
appearance of the parasitoid Anagrus
epos of the grape feeding leafhoppers
Erythromeura spp. was explained by com-
panion planted prune trees being a refuge
for an alternative host for the parasite, the
prune leafhopper Edwardsiana prunicola
(Pickett et al., 1990). There are probably
many such examples of such relationships;
the difculty is identifying them and then
being able to manipulate the habitat in such
a way as to make effective their use.
232 Chapter 6
Case Study: Impact of wild owers in orchards (Leius, 1967a,b)
Direct observation of the parasitoid Scambus buoliariae in paired ower tests
showed a preference for wild parsnip Pastinaca sativa when offered along with
wild carrot Daucus carota, buttercup Ranunculus acris and water hemlock
Cicuta maculata (Fig. 6.15) plants all found in areas where the parasitoids are
present (Leius, 1967b). In general, it would seem that the owers of the
Umbelliferae are better sources of nectar for adult parasitic Hymenoptera than
N
u
m
b
e
r
o
f
i
n
s
e
c
t
s
a
t
t
r
a
c
t
e
d
8.0
6.0
4.0
2.0
0
6.0
4.0
2.0
0
Fig. 6.15. The number of Scambus buoliana alighting and feeding on four different kinds of
owers in paired comparisons ( wild parsnip, wild carrot, buttercup, water
hemlock, no response) (after Leius, 1967b).
Chapter.6 10/7/00 11:22 am Page 232
6.11 Discussion
The control that can be exerted over pest
insect species by their natural enemies
needs to be harnessed and used to its maxi-
mum potential in any insect pest manage-
ment programme. The way in which the
natural enemies are used, i.e. introduc-
tions, inundation, augmentation, inocula-
tion or conservation, will depend on the
characteristics of the pest and the cropping
system in which it causes damage or yield
loss. As has been described, more stable
systems lend themselves best to use of nat-
ural enemies, but augmentations can be
used in less stable systems and even in
highly intensive systems such as
glasshouses, provided that the approach is
economically feasible. Techniques that
conserve natural enemies are already part
of traditional mixed subsistence farming
methods but more needs to be done to pro-
mote natural enemy conservation in more
intensive cropping systems. This would
require a greater interest by scientists and
investment of funds for research in this
subject than is currently apparent.
Research into techniques for conservation
of natural enemies has its dedicated advo-
cates but as a subject it lacks the glamour
and prestige that might be associated with
control through introductions and augmen-
tations. The problems associated with
implementation and adoption of conserva-
tion techniques can also be formidable,
hardly an incentive to budding applied sci-
entists. However, a greater emphasis needs
to be placed on the conservation of natural
enemies and work on this given a higher
priority, especially because of its relevance
to insect pest management in developing
countries.
Biological control was superseded ear-
lier this century by the development of and
increased use of chemical insecticides so
that research into biological control
decreased markedly. Although biological
control has once more gained its due recog-
nition as an extremely valuable form of
control, especially within the context of
the developing philosophy of IPM, on the
whole chemical and biological control are
incompatible techniques, mainly because
so many insecticides are detrimental to
natural enemies. There have been moves to
evaluate the effects of insecticides on bene-
cial insects and a general commitment to
recommend use of insecticides less toxic to
natural enemies or to apply insecticides at
times when natural enemies are less at risk.
However, in practice, natural enemy popu-
lations are consistently being annihilated
by insecticide use.
An increasingly appropriate alternative
to chemicals is now being provided by a
whole gamut of biological control agents
formulated as biopesticides. A greater
emphasis on rational, more selective
Biological Control 233
Table 6.11. Percentage parasitism of tent caterpillar pupae and codling moth in apple orchards
having rich, average and poor oral undergrowths (Leius, 1967a).
Tent caterpillar larvae Codling moth
Type of oral
undergrowth % parasitism ratio % parasitism ratio
Rich 65.2 18 33.6 5
Average 19.7 5 18.2 3
Poor 3.7 1 7.1 1
most other plants because the structure of the individual owers is amenable to
feeding with biting mouthparts. Proportionally about 18 times as many test cater-
pillar pupae were parasitized in orchards with rich undergrowths of wild owers
as in orchards with poor oral undergrowths (Table 6.11; Leius, 1967a).
Chapter.6 10/7/00 11:22 am Page 233
chemical insecticide use, combined with
biopesticides, should provide an effective
means of preserving natural enemy popula-
tions and gaining maximum impact from
biocontrol agents in integrated programmes
of pest management.
234 Chapter 6
Chapter.6 10/7/00 11:22 am Page 234
7 . 1 I nt roduct i on
Cultural control of insect pests is affected
by the manipulation of the environment in
such a way as to render it unfavourable for
the pest. Many of the methods interfere
with the pests ability to colonize a crop,
promoting dispersal, reducing reproduc-
tion or survival. This may be achieved
through techniques such as crop rotation,
hermetic storage systems, intercropping,
manipulation of planting dates and man-
agement of eld margins. Interference
methods include the use of semiochemi-
cals to disrupt insect communication, pre-
venting colonization or mating, and the
insect sterile technique which reduces the
number of females that can successfully
reproduce through interference with male
fertility.
Like host plant resistance, cultural con-
trol is a prophylactic method of control. It
can rarely be used as a tactical means of
control except perhaps in stored product
systems where spot check fumigation can
be achieved by modication of the storage
environment. Cultural control should be
considered as the rst-ditch defence
around which to build other control
options (Coaker, 1987). On its own, it is
unlikely to reduce pest infestation to below
economic damage thresholds. Since the
levels of control obtained with cultural
control are less dramatic than those
achieved from the use of other techniques,
such as chemical insecticides, and as a
great deal of pest control research has been
aimed at developing products rather than
techniques, there has been a tendency
among research workers to neglect cultural
control. For instance, van Lenteren (1987)
noted that in the study of environmental
manipulation for the purpose of improving
natural enemy efcacy, the only area that
had received attention appeared to be
behaviour modifying chemicals; a typical
example of the emphasis placed on the
development of products (Dent, 1993). Of
all the control techniques, cultural control
is rarely dependent on a particular product
and as a consequence of this the approach
offers few opportunities for capital return
and few potential commercial markets.
Hence cultural control has attracted little
interest and funding for research. Cultural
control is largely dependent on techniques
and practices and since it is difcult to sell
someone an idea or an approach, it is left
to the universities and government
research institutes rather than industry to
carry out the necessary research. Here
though, cultural control has suffered in
that the techniques on their own are rarely
capable of exerting the required levels of
control and there is no glamour or prestige
associated with control options that only
partially solve problems. The panacea
mentality has not really been subsumed by
the concept of IPM and cultural control
techniques remain one of the casualties of
7
Cul t ural and I nt er ference M et hods
235
Chapter.7 10/7/00 11:24 am Page 235
this approach (Section 10.3). Cultural con-
trol represents an important component in
the development of a coherent, holistic
approach to pest management and warrants
a great deal more attention than it is cur-
rently receiving.
Perhaps in contrast to this, the sterile
insect technique and the application of
semiochemicals have always promised
more than they have actually been able to
deliver as control measures. A great deal of
research has been conducted to identify
potentially useful semiochemicals, a large
proportion of which has involved the study
of lepidopteran sex pheromones. From this
have developed a range of monitoring
devices that detect pest presence (but
rarely provide more quantitative monitor-
ing or forecast information) and a number
of area wide mating disruption pro-
grammes. The sterile insect technique was
developed as an area wide approach but
has lacked a low cost and simple means of
achieving insect sterility and delivery sys-
tems for it to be truly widely applicable.
However, both these interference methods
have over the last 10 years moved in a
direction that can address previous fail-
ings. For insect sterilization, the develop-
ment of chemo-autosterilization techniques
(e.g. Wall and Howard, 1994) paves the
way to a cheap and effective technique
with widespread applicability, and for
semiochemicals, the prospect for more
integrated use in IPM is improved by new
strategies dening a more coherent frame-
work for their development and use (see
below) (Smart et al., 1997).
7 . 2 Approaches and O bj ect ives
Many of the problems involved in under-
standing the underlying processes and
mechanisms of cultural control are funda-
mental to the ecology of insect/host inter-
actions and thus are of immense interest to
some ecologists: for instance, the role of
insect dispersal in the colonization and
exploitation of crop plants. It is this inter-
est in ecological principles that has pro-
duced some of the more illuminating work
on the processes involved in cultural con-
trol. Knowledge and understanding of
these processes will enable entomologists
to predict more accurately the potential
value of similar control techniques in other
unstudied systems. For the large part, how-
ever, research into cultural control revolves
around the evaluation of various combina-
tions of practices and techniques for spe-
cic crop systems. These studies make
little or no attempt to identify the
processes that account for the differences
between treatments. While there is a need
for both approaches, it would be difcult,
and often impossible, to predict the wider
value of new techniques and practices
using the latter approach. There has been a
tendency for a greater emphasis to be
placed on limited evaluations of treatments
rather than on experiments to evaluate
processes and as a result, cultural control
is often considered to include a mismatch
of techniques that can have no cohesive
relations. However, over recent years more
has been done to develop an integrated
philosophy based on a greater knowledge
of the host, crop/pest biology and their
underlying ecological principles, providing
a framework for a more integrated
approach in the future.
The approaches that are currently inu-
encing the development of semiochemical
use are referred to as push-pull or stimulo-
deterrent diversionary strategies (SDDS)
(Smart et al., 1997; Miller and Cowles,
1990). These are perhaps best explained
through example. Semiochemicals can be
used in a variety of different ways to control
pests: the harvestable crop can be protected
by means of repellents, antifeedants or egg-
laying deterrents (push), and parasitoids
and predators are attracted in to mop up
pests undeterred by the protectants (pull).
At the same time, aggregative semiochemi-
cals, including host plant attractants and
pheromones, stimulate pests to enter traps
or to colonize a trap crop (pull) where
selective chemicals or biopesticides are
applied (Smart et al., 1997). Such strategies
provide a framework for a systems
236 Chapter 7
Chapter.7 10/7/00 11:24 am Page 236
approach to semiochemical R&D that
promises much more than that based on an
isolated independent development of semi-
ochemical products. The opposite is almost
true for the sterile insect technique SIT,
however, where having identied an
approach (chemo-autosterilization) that has
general applicability, target/sterilization
systems need to be developed on a case by
case basis.
7 . 3 Condi t i on of t he H ost
The ability of a host to withstand pest
infestation may be due as much to its gen-
eral state or condition as to any inherent
resistance. A healthy and t animal or
plant can have a greater tolerance of pest
attack than an unhealthy one. The
immunological response of humans and
animals can be impaired by any number of
factors that can indirectly affect their sus-
ceptibility to pest attack. The immunologi-
cal response of cattle to the ticks Boophilus
microplus is affected among other things
by stress, photoperiod and infestation with
other parasites, while their resistance to
the cattle grub Hypoderma lineatum can be
impaired by a vitamin A deciency
(Drummond et al., 1988). In human, animal
and plant systems such factors may be
inuenced by the use of cultural control
techniques. These are techniques that can
be used to improve the condition of the
host and thereby make it more tolerant of
pest attack. Of course, the converse is also
possible, since crop plants provided with
adequate nutrition and water availability
may prove to be more attractive to pests,
the populations of which may increase to
even greater levels on healthy crops. In
these circumstances, the benets of
increased yields from, for instance, the use
of fertilizers and improved water availabil-
ity, must be balanced against the increased
size of the pest population (van Emden et
al., 1969). For example, inorganic fertilizer
applied to tomatoes was related to higher
incidence of aphids compared with
tomatoes treated with organic fertilizer
(Edwards et al., 1996) and high densities of
the cereal aphids M. dirhodum and S. ave-
nae were associated with plots that
received the higher spring application of
fertilizer (Gash et al., 1996). However, there
are no hard and fast rules. Coaker (1987)
states that irrigation, mulching, manuring
and fertilization are practices that in gen-
eral promote rapid growth and shorten the
time the susceptible plant stage is available
for attack, providing the crop with greater
tolerance and the opportunity to compen-
sate for insect damage. However, such
practices can also change the physiology of
the plant as food for insect pest species,
making it more lush and thereby enhancing
pest survival (Coaker, 1987). The value of
these and other cultural practices must at
present be assessed on an individual
crop/pest basis since there is little current
information on which general conclusions
can be based.
Pest outbreaks may occur because crop
hosts suffer environmental stress
(Brodbeck and Strong, 1987; Mattson and
Haack, 1987), the most devastating of
which can be drought stress caused by high
temperatures and decreased water avail-
ability. Under these conditions virtually
every plant process is affected. Water stress
induces changes in trichome size and den-
sity, their thickness and waxiness (as a
means of increasing reectance and
decreasing transpirational water loss), the
plants are generally warmer due to less
transpirational cooling (Mattson and
Haack, 1987) and have increased levels of
soluble carbohydrates and amino acids pre-
sent in the leaves (Wheatley et al., 1989).
Depending on the pest, these changes may
or many not inuence their ability to sur-
vive, increase reproduction and develop-
ment rates. In water stressed groundnut, it
has been shown that the leaf miner
Aproaerema modicella was most abundant
on the plants suffering the greatest stress
and where leaf surface temperatures were
highest, whereas the cicadellid Empoasca
kerrii tended to concentrate where there
was no drought stress and where leaf tem-
peratures were lowest (Wheatley et al.,
Cultural and Interference Methods 237
Chapter.7 10/7/00 11:24 am Page 237
1989). Hence, in situations where irrigation
was introduced to reduce the effects of
drought, it would be expected to have dif-
ferential effects on the two pest species.
The physiological condition of plants
can also be inuenced by low tempera-
tures. For instance, strawberry cultivars are
sensitive to environmental factors and their
physiological responses are determined in
large part by vernalization or chilling
(Bringhurst and Galleta, 1990). The chilling
history of plants has been shown to affect
their subsequent growth and pattern of
resource partitioning (Gutridge, 1958) and
pest abundance (Walsh et al., 1997).
Chilled strawberry plants show increased
vegetative vigour and reduced suscept-
ibility to two spotted spider mites
Tetranychus urticae (Walsh et al., 1997).
Chilling cabbage has also been shown to
affect the abundance and distribution of
Bemisia argentifolii (Zalom et al., 1996).
More detailed studies are required on the
effects of such factors as irrigation, fertil-
ization and vernalization which can have a
major inuence on the condition of crop
hosts and thus on the levels of pest infesta-
tion likely to occur. Often the introduction
of these practices is studied purely from
the point of view of agronomy and the
effects they have on crop yield. Perhaps the
research should be extended to also evalu-
ate their concomitant effects on pest infes-
tation, just to ensure that the problem is
being fully solved rather than another
being created.
7 . 4 M odi fyi ng t he Physi cal
Envi ronment
The physical environment can have a
marked effect on the development of insect
pest populations and in some circum-
stances it may be possible to manipulate or
modify it to obtain a required level of con-
trol. The term physical environment refers
to any abiotic variable that may affect the
insect in any way and includes tempera-
ture (e.g. Yokoyama and Miller, 1996),
humidity (e.g. Santoso et al., 1996), light
intensity, atmospheric conditions (e.g.
Hodges and Surendro, 1996), and soil com-
position and structure (e.g. Blackshaw and
Thompson, 1993; Leather, 1993). The range
of conditions and situations in which the
physical environment plays a role in
diminishing or increasing pest numbers is
wide but the number of situations in which
the environment is under the control of
man and hence can be actively used as a
means of cultural control is more limited.
Irrigation of eld crops is one obvious
example of how a crop environment may
be physically changed according to mans
wishes and there are situations where irri-
gation has been shown to inuence pest
population development (Tabashnik and
Mau, 1986; Wheatley et al., 1989). Another
obvious example, this time from medical
entomology, is the modication of mos-
quito breeding grounds by drainage, as a
control for malaria. It is stored product sys-
tems, however, in which the modication
of the physical environment has had its
most important role in the control of pests.
Stored product systems are effectively
simple man-made habitats in which tem-
perature and other environmental variables
may be ideal for pests but in which, in
many situations, the conditions can also be
controlled by man. Each system is easy to
understand and can often be changed
according to need, especially with regard
to physical factors. There are, however,
almost as many different systems as there
are stored and processed materials which
makes it difcult to develop wide ranging
coherent IPM strategies (Benz, 1987).
Strategies have to be developed according
to each individual circumstance (a com-
mon feature among cultural control tech-
niques) although the physical factors that
are used or modied to control pests tend
to be restricted to temperature, humidity or
effects on the interstitial atmosphere.
There are about 20 economically impor-
tant insect pests of stored products and
each species has a characteristic range of
limiting and optimal temperatures and
humidities (Evans, 1987). Generally, insect
development is possible in storage systems
238 Chapter 7
Chapter.7 10/7/00 11:24 am Page 238
at temperatures within the range of 1040C
but tends to be optimal at 2530C, while
access to free water is generally not impor-
tant (Evans, 1987). If temperature and
humidity are to be modied so that condi-
tions are unfavourable for the pest, it is
rst necessary to determine what range of
temperatures and humidities are detrimen-
tal to each species. The range of tempera-
tures and humidities that favour
development of the grain mite Acarus siro
are shown in Fig. 7.1. Irrespective of tem-
perature, the mite cannot develop when
the relative humidity falls below 60% and
although some adults may survive for lim-
ited periods, mortality is usually rapid, few
eggs are laid and none subsequently hatch
(Cunnington, 1976). A. siro does, however,
show a high tolerance to low and high tem-
peratures provided humidity is kept high
(Fig. 7.1). To ensure control of the pest,
temperatures/humidities must be increased
or decreased either above or below the tol-
erance limits of the insect or to levels that,
if they do not kill the pest, will reduce its
rate of development to an acceptable level.
For insect control, the aim is usually to
reduce temperatures to 1517C although
stored product pests from tropical climates
may be inactivated even at relatively high
temperatures. Beetles such as Tribolium
castaneum and the cowpea beetle
Callosobruchus maculatus all require tem-
peratures above 20C for normal develop-
ment and reproduction (Benz, 1987), thus
any reduction in temperature below this
will have a signicant effect on population
development. Cooling large masses of
product by refrigeration may be uneconom-
ical but cooling by aeration during a cold
season in a temperate climate is feasible,
although the level of disinfection obtained
will depend on the intrinsic cold tolerance
of the species, the development stages pre-
sent, the rate at which cooling is achieved,
the temperature attained and the time for
which it is maintained (Evans, 1987). With
the grain weevil (Sitophilus granarius)
20C for 8 hours, 16C for 12 hours and
12C for 24 hours are enough to kill all
the stages of the beetle (Benz, 1987). High
temperatures in the range 3540C are also
sufcient to control most stored product
pests.
The control of pests through changes in
the interstitial atmosphere is a technique
Cultural and Interference Methods 239
Fi g. 7 . 1 . The effect of physical conditions (relative humidity and temperature) on the development of the
grain mite, Acarus siro, showing conditions under which the life cycle was completed () and those under
which eggs failed to hatch or development was incomplete () (after Cunnington, 1976).
Chapter.7 10/7/00 11:24 am Page 239
that has ancient origins in hermetic storage
systems. Hermetic storage involves the
modication of the atmosphere in sealed
underground storage pits, where the respi-
ration of the stored product increases the
CO
2
level and decreases the level of oxygen
to an extent that kills any insect pests con-
tained within the store. Hermetic storage is
still used in some developing countries in
northern Africa. The more modern equiva-
lent of hermetic storage systems and their
effect on the storage atmosphere is the use
of gas tight storage facilities in which oxy-
gen decient, carbon dioxide or nitrogen
enriched atmospheres are used to control
insect pests (e.g. Soderstrom and Brandl,
1982). These atmospheres may affect vari-
ous pest species and their developmental
stages differentially. Grain weevil, S. gra-
narius, adults were the most susceptible
stage to atmospheres of CO
2
and N
2
fol-
lowed by larvae, pupae and eggs whereas in
the rice weevil, S. oryzae, the pupae were
the least susceptible stage followed by eggs,
larvae and the adults (Lindgren and
Vincent, 1970). The management of storage
pests can be achieved by appropriate timing
of aeration (Hagstrum and Flinn, 1990;
Flinn et al., 1997), by compression of air
(e.g. Yokoyama et al., 1993b) or by a combi-
nation of fumigant and aeration (and/or
compression; e.g. Yokoyama et al., 1993a).
Controlled atmospheres have been shown
to be economically competitive with
chemical treatments such as phosphine
(Soderstrom et al., 1984) but if they are
used as longer-term protectants, they have
the disadvantage that tight sealing of the
system needs to be ensured and access for
inspection and handling is restricted.
However, controlled atmospheres remain
less hazardous than chemical fumigants for
use by control operatives and are less likely
to leave residues in the stored product.
240 Chapter 7
Case St udy: M odi cat i on of habi t at t o cont rol t he l one st ar t i ck
( Amblyomma amer i canum) , a pest of cat t l e ( M eyer et al . , 1 9 8 2 )
The physical environment plays an important role in the distribution and abun-
dance of the lone star tick, Amblyomma americanum. Thus techniques that mod-
ify the habitat in such a way as to render the physical environment unsuitable
for the tick, could be used as a means of cultural control to reduce the tick infes-
tations of cattle.
The habitat modication evaluated in this study consisted of a total mechani-
cal clearing of all accessible land on the chosen eld, followed by new pasture
establishment. After the application of fertilizer, fescue, annual ryegrass and
white clover were sown. Data on the size of the tick populations and on the
physical parameters (percentage soil moisture, soil temperature, soil surface tem-
perature, air temperature, percentage relative humidity and light intensity) were
collected in 1978 prior to habitat modication. These same parameters were then
measured and compared after habitat modication to evaluate their effect.
The changes in the physical environmental characteristics of the eld and the
mean number of nymph and adult ticks sampled in the eld in 1978, 1979 and
1980 are shown in Table 7.1. The mean number of adults and nymphs is
markedly reduced in 1979 and 1980 from the values in 1978 prior to treatment.
Regression analyses of the physical parameters against the numbers of nymphal
and adult lone star ticks showed that soil temperature (depth not given) and soil
surface temperature were signicantly associated with reductions in nymphal
populations, whereas only soil surface temperature was associated with adult
population reductions. From this it might be postulated that nymphs are more
dependent on shelter in close association with the soil and are more sensitive to
temperature changes in the shelter than the adults. The removal of leaf litter in
Chapter.7 10/7/00 11:24 am Page 240
7 . 4 . 1 Physi cal bar r i er s and mul ches
The environment of a pest can be disrupted
using physical barriers or mulches. Barriers
may be quite subtle in form, such as those
composed of soil particles that are too large
for termites to displace with mandibles, yet
too small for termites to pass between (Su
and Scheffrahn, 1998) or obtrusive, such as
stainless steel mesh barriers used for pre-
construction installation in houses to pre-
vent termite foraging (Lenz and Runko,
1994; Grace et al., 1996). Other types of
barriers include reective plastic mulches
and netting tunnels which can repel
insects or reduce the transmission of
viruses (Stapleton et al., 1994). Nets have
been shown to offer protection to cauli-
owers against Delia radicum, Brevicoryne
brassica and Lepidoptera, and to Japanese
radishes against Delia radicum (Ester et al.,
1994). Reective mulches have proved par-
ticularly effective in preventing insect col-
onization. Flying aphids are not attracted
to plants growing close to white or reec-
tive surfaces. Reective surfaces such as
aluminium foil, reective polyethylene
lms and reective powders have been
used to repel aphids and reduce incidence
of virus diseases (Henshaw et al., 1991;
Stapleton et al., 1993). More recently,
biodegradable spray mulches have been
successfully used (Stapleton et al., 1994;
Summers et al., 1995).
7 . 5 Agronomi c Pract i ces
Crop rotation, tillage and planting date are
three agronomic practices that can directly
affect crop yield. They may also have a sec-
Cultural and Interference Methods 241
the clearing process during habitat modication eliminated one of the major
sources of shelter for the ticks and thus probably made them more susceptible to
the effects of extreme temperatures.
An economic evaluation of the costs of the habitat modication technique was
made and compared with the costs of the alternative treatments, insecticide use
and animal control through fencing (restricting animals to areas unlikely to be
infested with ticks). In terms of total annual costs, the habitat modication was
not the cheapest treatment but when total costs were evaluated in terms of the
cost of production of a kilogram of plant dry matter per hectare, the habitat mod-
ication proved most protable, costing $0.14 compared with $0.74 and $0.33
for fencing and insecticide use, respectively.
Tabl e 7 . 1 . A comparison of the mean values of a number of physical parameters and of the mean
number of adult and nymphal lone star ticks sampled in 1978 prior to habitat modication, with
conditions and mean insect counts in the same eld after habitat treatment in 1979 and 1980
(Meyer et al., 1982).
Year
1978 1979 1980
% Soil moisture 61.6 72.7 30.9
Soil temperature (C) 21.9 27.3 30.1
Soil surface temperature (C) 27.1 32.1 37.7
Air temperature (C) 25.8 29.5 33.5
% RH 57.2 46.1 39.8
Light intensity 4.9 7.9 8.4
Nymphs 10.8 0.7 0.2
Adults 4.8 0.5 0.2
Chapter.7 10/7/00 11:24 am Page 241
ondary effect in that they can sometimes
also inuence the level of insect pest infes-
tation that may occur within a crop.
Provided this additional role of pest control
does not conict with the primary objective
of directly improving crop yield, then agro-
nomic practices may be recommended as a
means of cultural control for use in IPM.
7 . 5 . 1 Crop rot at i on
The rotation of crop provides a means of
maintaining soil fertility so that an appro-
priate rotation can produce better average
yields than continuous cultivation of the
same crop (Table 7.2; Webster and Wilson,
1980) without the need for additional fer-
tilizers. The type of crops used in the rota-
tion will often be very important for
maximizing yield. There may be some
advantage in using crops that have differ-
ent rooting habits and hence vary demand
between different soil layers, or using legu-
minous plants that can x soil nitrogen.
Another factor that could also inuence the
choice of crop types in a rotation is that
combination which best reduces pest dam-
age. Part of the value of crop rotations is
their ability to prevent the build up of
insect pests, as well as other pests such as
weeds and pathogens.
Generally, crop rotation is most effective
against pest species that have a narrow
host range and limited range of dispersal.
A new generation of an insect pest that
may have overwintered in the vicinity of
its host crop will be faced with a different,
non-host crop plant in a subsequent sea-
son. The insect pest will be obliged to dis-
perse and for insects with poor dispersive
powers this could reduce the likelihood of
nding a host. The result will be that sub-
sequent colonization of some elds of the
host crop species may be retarded. The
extent to which colonization is reduced
will determine the value of the technique.
In the event that absolute numbers locating
the crop are not diminished, satisfactory
control may still be achieved if the arrival
of the colonizers is delayed to a less critical
plant growth stage.
Rotations have been shown to be effec-
tive against the Colorado potato beetle
(Leptinotarsa decemlineata) by creating a
delay in the time of crop infestation
(Lashomb and Ng, 1984; Wright, 1984). In a
rotation of potato and wheat, the oviposi-
tion and rst appearance of the beetle were
delayed when compared with an unrotated
potato eld. This delay was attributed to
physical and environmental barriers that
slow emigration from the wheat by the
overwintering adults (Lashomb and Ng,
1984). Since rotations typically involve
planting the potato crop in an adjacent
eld (often separated from the eld in
which the potatoes were grown the previ-
ous year by only a drainage ditch, canal,
eld road or hedgerow) and the dispersal
242 Chapter 7
Tabl e 7 . 2 . The inuence of cropping systems on the yield (kg ha
1
) of sorghum, groundnut, cassava and
cotton at two different sites in Nigeria. Crops are used in rotation or as a continuous cultivation of the same
crop (monocropping) (from Webster and Wilson, 1980).
Site First cycle (195052) Second cycle (195355)
Sorghum Groundnut Cassava Sorghum Groundnut Cassava
Bida
Monocropping 353 305 5094 397 143 3128
Rotation 709
**
388 6059
**
749
**
183 5296
**
Samaru Sorghum Groundnut Cotton Sorghum Groundnut Cotton
Monocropping 1053 804 471 1062 781 402
Rotation 1341
**
1160
**
498 1248
**
1027
*
489
*Signicant increase, P = 0.05; ** P = 0.01.
Chapter.7 10/7/00 11:24 am Page 242
by Colorado potato beetle from overwinter-
ing sites is mainly by walking (French et
al., 1993), it should be possible to deter-
mine the optimum distance for spacing
rotations. This has been done using mark-
recapture experiments which have indi-
cated that an effective eld rotation to
reduce beetle population densities from
year to year will require a distance of 0.5
km (Follett et al., 1996).
Crop rotations have become less popular
as more intensive farming methods have
been utilized but there is little doubt that
they can provide an effective means of pest
suppression. The choice of crops used in
the rotation must be appropriate and
should not introduce other pests into the
system. It will be more difcult to devise
appropriate rotations against polyphagous
and/or mobile pests. In Europe, typical
rotations involve grasses, legume and root
crops which have been used to control
wireworms (Agriotes spp.), chafers
(Melolontha melolontha and Amphimallon
solstitalis) and leatherjackets (Tipula spp.)
(Coaker, 1987). These and other insects that
have soil inhabiting stages are also suscep-
tible to control through different types of
tillage practices.
7 . 5 . 2 Ti l l age pract i ces
The type of tillage practice used can have
an impact on labour costs, machinery wear,
soil erosion and water quality. There has
been a general change away from more tra-
ditional mould-board ploughing (which
turns over the soil integrating all crop
residue) to various forms of conservation
tillage (Hammond, 1997). The total number
of hectares where conservation tillage is
used currently accounts for >8 million ha
in the mid-west of the USA alone (CTIC,
1995). Conservation tillage may be dened
as those practices leaving >30% residue
cover on the soil surface after planting and
includes no-till, ridge till and mulch till
(CTIC, 1995).
The type of cultivation can also
markedly inuence the soil environment
and affect insect survival either indirectly
by creating inhospitable conditions and by
exposing the insects to their natural ene-
mies or directly by physical damage
inicted during the actual tillage process
(Stinner and House, 1990). Often the actual
means by which insect survival is reduced
remains unknown and studies are con-
ducted simply to quantify the extent of the
differences in insect infestations between
tillage treatments. However, in two
grasshopper pests Kraussaria angulifera and
Oedaleus senegalensis, cultivation is known
to affect the numbers of eggs and nymphs
present by exposing the egg pods to desicca-
tion, by reducing the level of food, shelter
and vegetation available and by making the
soil rough and unsuitable for egg laying
(Amatobi et al., 1988). Hence, the longer a
eld was left fallow inuenced the build up
of the grasshoppers in these elds.
Comparisons of the results obtained
from different tillage practices may shed
some light on the way in which infestation
is reduced. Emergence of the sunower
seed weevil (Smicronyx fulvus) was
reduced by 2956% with the use of a
mould-board plough which turns over the
soil, effectively burying the late larval and
pupal stages. However, this covering effect
was thought to be only partially responsible
for the increased mortality as a chisel
plough resulted in a reduced emergence of
between 36 and 39% without moving the
larvae substantially deeper in the soil pro-
le. Thus, it was concluded that factors
such as aeration, soil temperature and dry-
ing and physical damage resulting from
tillage were also important contributory fac-
tors (Gednalske and Walgenbach, 1984). A
disc-plough treatment caused up to 73.5%
mortality of the overwintering larvae of
Dectes texanus, a pest of sunower, com-
pared with 39.7% mortality using a sweep
plough. The higher mortality in the disc
treatment was probably due to greater root
destruction by discing, exposing larvae to
the soil environment. The sweep blades
tend to sever the tap roots while leaving the
upper part of the roots and stubble intact,
permitting larval survival (Rogers, 1985).
Such observations can lead us to some ten-
tative conclusions about the likely means
Cultural and Interference Methods 243
Chapter.7 10/7/00 11:24 am Page 243
by which tillage practices reduce infesta-
tions of pests, but unless studies evaluate
the actual mechanisms involved then there
can be little hope of extrapolating the
results of treatments to other cropping sys-
tems. The same is generally true of studies
of the effects of the timing of tillage practice
on insect pest infestations.
Some studies will speculate on the rea-
sons for reductions in pest numbers (e.g.
Kay et al., 1977) while others attempt to
identify the reasons for difference in pest
numbers with cultivation treatments (e.g.
Hammond, 1995). Too few studies also
evaluate the economic impact of cultiva-
tion practices that lead to reductions in
pest numbers. Pike and Glazer (1982) con-
sidered the effects of tillage both on the
level of pest infestation of the rhizome
borer Fumibotys fumalis and of yield of the
peppermint crop.
F. fumalis overwinters in the soil of pep-
permint elds, and the crop is grown in
pure stands for 45 years until damage
from F. fumalis or other pests renders it
unprotable. The prepupae of F. fumalis
overwinter near the soil surface and it was
this characteristic that made cultivation a
possible option for control. The tillage
method was selected on the basis that it
was already in use by some growers as the
means of regenerating the peppermint crop.
Strips of peppermint were tilled to a depth
of 14 cm and the number of adults emerg-
ing from the stripped plots was reduced by
79 and 83% compared with solid stand
peppermint plots. Also, there was no signif-
icant difference between strip plots and no
tillage plots for fresh hay weights or oil
yields (Table 7.3). Such estimates of both
yield and infestation levels should be taken
into account in all experiments where
tillage practices are being evaluated, other-
wise the implications of the technique can-
not be fully appreciated and farmers are
unlikely to adopt the idea.
244 Chapter 7
Tabl e 7 . 3 . The effect of no tillage and of strip rotary tillage on peppermint fresh hay weights at harvest, oil
yields and Fumibotys fumalis cumulative season totals (from Pike and Glazer, 1982).
Fumibotys fumalis
Fresh hay weight Oil yield cumulative season
Treatment (kg SE 10 m
2
) (ml SE 3 kg
1
fresh hay) Total SE 3 m
2
1980
Strip rotary tillage 13.0 0.2 11.0 0.8 6.0 1.9
No tillage 13.0 0.3 11.9 0.7 28.0 4.3
1981
Strip rotary tillage 10.5 0.3 9.6 0.3 5.6 0.7
No tillage 10.8 0.4 10.4 0.6 32.5 4.8
Case St udy: The effect s of crop rot at i on and t i l l age on t he si z e of
i nfest at i ons of t he bl ack cut wor m (Agrot i s i psi l on) i n cor n
( Johnson et al . , 1 9 8 4 )
The black cutworm (Agrotis ipsilon) is a sporadic pest of corn in the USA during
May and June. The level of infestation has been shown to be inuenced by the
presence of large amounts of crop debris and weeds and, hence, the use of a crop
rotation and an appropriate tillage practice could provide a possible means of
cultural control.
The rotations evaluated in this study were continuous corn, continuous soy-
bean, a corn followed by soybean rotation, and a soybean, wheat, corn rotation
with each crop present in each year of the study. Each rotation treatment
Chapter.7 10/7/00 11:24 am Page 244
7 . 5 . 3 Pl ant i ng dat e
The time or date at which crop plants are
sown can have a signicant impact on sub-
sequent yield. In general in the tropics,
early planting at the start of the rainy sea-
son is essential if the best yields are to be
obtained. As a rule, yields are markedly
and progressively reduced the longer plant-
ing is delayed after the onset of the rains
(Webster and Wilson, 1980). Early sown
crops benet from a full seasons rainfall,
suffer less weed competition and benet
from the initial high soil nitrate levels
available at the beginning of the rains.
Crops may also benet from a reduced
insect pest infestation (ABrook, 1964;
Gebre-Amlak et al., 1989; Emehute and
Egwuatu, 1990) although early planting is
not always the most appropriate strategy to
ensure reduced levels of attack (Starks et
al., 1982; Sloderbeck and Yeargan, 1983;
Bergman and Turpin, 1984; Rogers, 1985;
Zeiss and Pedigo, 1996).
Varying the planting time of crops
works on a means of cultural control by
creating asynchrony between the crop phe-
nology and the population dynamics of the
pest species. Asynchrony, particularly with
an oligophagous pest, can retard the rate of
colonization, reproduction and survival of
the pest and reduce damage with respect to
the susceptible crop growth stage (Ferro,
1987; Teetes, 1991; Metcalf and Metcalf,
1993). For such methods to have an impact
though, planting times need to be synchro-
nized between farms within a region (par-
ticularly for highly mobile pests) to reduce
the variation in availability of susceptible
crop stages.
The adoption by farmers of different
planting times as a means of control will
largely depend on what other work has to be
Cultural and Interference Methods 245
included three tillage systems: autumn mould-board plough, autumn chisel
plough/spring disc plough, and no tillage. The rotation/tillage combinations
were replicated four times in a randomized complete block design. The extent of
the black cutworm damage in each treatment was evaluated by stand counts and
the number of plants cut off near the soil surface, including plants exhibiting
wilting (deadheart) from subsurface or internal tunnelling.
The results of the experiment showed that corn following soybean or wheat in
a rotation, combined with reduced (no) tillage produced higher black cutworm
damage in the plots (Table 7.4). The black cutworm moths appear to be less
attracted to corn residue than to soybean or wheat debris for oviposition. Damage
was consistently lower in the mould-board plough treatments. The complete soil
turnover by mould-board ploughing should negate any inuence of crop residue
on black cutworm oviposition. Hence, infestations of the black cutworm are least
likely to occur if corn is grown continuously but the mould-board plough is used
to reduce the amount of crop residue remaining for cutworm oviposition.
Tabl e 7 . 4 . The effect of crop rotation and tillage system on black cutworm (Agrotis ipsilon)
infestations (from Johnson et al., 1984).
Crop rotation
Corn/corn Soybean/corn Soybean/wheat/corn
Treatment 1981 1982 1981 1982 1981 1982
No till 4.0 0.5 6.2 0.9 1.9
Chisel plough 1.4 0.5 3.4 0.7 0.8
Mould-board plough 1.5 0.6 0.8 0.6 0.6
Chapter.7 10/7/00 11:24 am Page 245
completed during the period recommended
from planting. Damage by pests to direct
drilled, autumn sown grass was greatest in
the autumn compared with spring (Bentley
and Clements, 1989) so sowing in spring
would seem to be a good cultural practice if
pest damage is to be minimized. However,
farmers would often rather sow in autumn
when the land has the lowest potential for
production than in spring when the disrup-
tive effects of reseeding are greatest (Bentley
and Clements, 1989). Thus, the recommen-
dation of a particular planting date to con-
trol a specic pest in a single crop must not
be made in isolation of other farm activities.
The control of insect pests must work
within the context of farming systems and
the needs of the farmer should represent a
key factor in the choice of dates for evalua-
tion in eld trials.
Harvest dates, as well as planting dates,
can have an effect on pest incidence or the
amount of damage caused (e.g. Berry et al.,
1997). In crops where insect pests reach
outbreak proportions during a season and
produce a resting stage at the end of a sea-
son it is possible that the area will act as a
major source of pest inoculum during the
subsequent season. This can sometimes be
avoided if the crop is harvested before the
insect develops its resting stage (Ferro,
1987). In other situations, such as forage
crops which are regularly harvested,
timely cutting can be used to control pest
numbers (Penman et al., 1979; Hagen,
1982; Onstad et al., 1984). The early cut-
ting of a second harvest of alfalfa inter-
rupts the development of the potato
leafhopper offspring, Empoasca fabae,
before any become nymphs or adults. This
is important because it is only these two
stages that can survive the harvest (Onstad
et al., 1984).
246 Chapter 7
Case St udy: The effect of sow i ng dat e on i nfest at i on and damage
caused by t he mai z e st al k borer (Busseol a fusca) on mai z e i n Et hi opa
( G ebre- Aml ak et al . , 1 9 8 9 )
The maize stalk borer is an economically important pest of maize and sorghum
in Ethiopia but only conicting data are available on the effects of sowing time
on the size of borer infestation and the damage.
Successive sowings of maize were made at 10 day intervals between 10 April
and 7 July in 1985 and 1986. There were ten different planting dates with three
replications, using a randomized complete block design. There were two sets of
experiments, in one the plots were left untreated and in the other they were
treated with cypermethrin at the rate of 0.3 kg a.i. ha
1
. At the end of the season,
yields of maize in both sets were compared and the difference in yield between
the two was considered to be the crop loss due to B. fusca infestation at that sow-
ing date, although the degree of control of the respective infestations is not given.
The level of infestation of B. fusca was estimated every two weeks as the per-
centage of infested plants and deadhearts. There were two peaks of infestation
representing two generations of the insect. Plants sown in April and early May
had signicantly lower infestations of rst generation larvae while levels of infes-
tation by second generation larvae were signicantly higher on later sowing dates.
The infestation by the second generation larvae had a signicant effect on the
grain yield of the late sown maize (Table 7.5). Even with insecticide use, the yield
of the late sown crop was markedly reduced. Hence, to obtain better yields with-
out the application of insecticide the planting of maize in this region of Ethiopia
should not be later than April.
Chapter.7 10/7/00 11:24 am Page 246
7 . 5 . 4 Sow i ng/ pl ant i ng densi t y
The spacing of plants will have a signi-
cant effect on their yield, with the maxi-
mum weight of the plant material from a
unit area of land only being obtained when
the individual plants are competing with
each other (Finch et al., 1976). Obviously
there are limits where plant density will
severely inuence plant yield and/or qual-
ity but within these limits, there may be
plant densities which also reduce pest
insect abundance and can potentially be
used as a form of cultural control.
Ultimately, however, yield advantages due
to plant spacing will tend to over-ride the
effects of plant density on pest incidence
or damage. The density of sorghum
seedlings affects the number of eggs that
are laid by the sorghum shooty
(Atherigona soccata) (Fig. 7.2) but at the
higher densities where the pest control
effect is greatest, the stem height, width of
last expanded leaves and leaf stage of the
sorghum are reduced to a level that would
not give a satisfactory yield (Delobel,
1981).
In general, an increase in plant density,
i.e. a reduction in plant spacing, seems to
reduce pest numbers (ABrook, 1964, 1968;
Farrell, 1976; Tukahirwa and Coaker, 1982)
but not in all cases (Mayse, 1978; Troxclair
and Boethel, 1984). One of the main rea-
sons for the response of insects to varying
plant density has been the contrast
between plants and their soil background
and the effect of this on the optomotor
landing response of the ying insects
(ABrook, 1964, 1968; Smith, 1969). Aphis
craccivora, Aphis gossypii and Longiunguis
sacchari were trapped at approximately
1 m above ground more often over widely
spaced than over close-spaced groundnuts.
At crop height A. craccivora and A.
gossypii showed a similar but even greater
response to plant spacing (ABrook, 1968;
Table 7.6). This effect was attributed to
an optomotor response to the contrast
between bare earth and the plants, and
hence, the stimulus was greater over the
wider spaced plants. Such responses may
be explained if the insects concerned have
evolved to nd host plants at low densities,
perhaps as early colonizers of disturbed
ground or as small patches isolated from
adjacent host plants (Coaker, 1987).
Other reasons that have been given to
Cultural and Interference Methods 247
Tabl e 7 . 5 . Yield (quintal ha
1
) of maize with and without insecticide use to control Busseola
fusca and yield loss due to this pest following different dates of sowing (Gebre-Amlak et al.,
1989).
Yield loss due to Busseola fusca
Yield (q ha
1
) Yield (q ha
1
) infestation
Busseola fusca Busseola fusca
Sowing date controlled not controlled (q ha
1
) (%)
10 April 74.9 67.6 7.3 9.8
20 April 80.4 77.3 3.1 3.9
30 April 75.7 79.7
10 May 76.6 64.7 14.9 18.7
20 May 65.4 58.0 7.4 11.3
30 May 49.5 18.2 31.3 63.2
9 June 40.0 3.2 36.8 92.0
19 June 33.0 1.7 31.3 94.9
29 June 24.2 0.0 24.2 100.0
9 July 14.8 4.9 9.9 66.9
Chapter.7 10/7/00 11:24 am Page 247
explain lower insect numbers in dense
plantings have included host plant condi-
tion (Farrell, 1976), the presence of excess
vegetation acting as a deterrent (Delobel,
1981), changes in the microenvironment
favoured by the pest and its natural ene-
mies and the crops attractiveness (Coaker,
1987).
248 Chapter 7
Tabl e 7 . 6 . Percentage total trap catch at different plant spacings of groundnut and bare earth (from ABrook,
1968).
Vertical trap at 0.91 m Horizontal trap at 0.30 m
Close Wide Bare Close Wide Bare
spacing spacing earth spacing spacing earth
Aphis craccivora 15.1 37.4 47.5 2.6 27.4 70.1
Aphis gossypii 22.2 30.6 47.2 3.7 40.9 55.5
Longiunguis sacchari 13.5 38.5 47.9 6.1 19.3 74.6
Case St udy: The effect of pl ant densi t y on popul at i ons of t he cabbage
root y on four cr uci ferous crops ( Fi nch et al . , 1 9 7 6 )
The cabbage root y (Delia radicum) is a pest of the cruciferous crops swede,
cauliower, cabbage and Brussels sprouts in the UK. To study the effects of
planting density on infestation by the root y, plots of each crop were sown as
concentric circles (24 per plot) of plants at spacings ranging from 10 to 90 cm
between individual plants, which provided plant densities between 1.5 and 68.3
plants m
2
. The number of cabbage root y pupae was estimated from 15 cm
diameter soil cores each containing the root system of one plant. The pupae were
collected and weighed.
The number of pupae increased in each crop with increasing plant density
(Fig. 7.3). The slopes of the regression for Brussels sprouts, cabbage and cauli-
Fi g. 7 . 2 . The relationship between the host plant density and the number of Atherigona soccata eggs ( )
and surviving rst star larvae () per plant (after Delobel, 1981).
Chapter.7 10/7/00 11:24 am Page 248
Cultural and Interference Methods 249
ower were not signicantly different but the intercepts were signicantly differ-
ent. The regression slope of the relationship between the number of pupae and
plant density for swede differed from the combined value for the slope of the
other three crops. Although the number of pupae increased with plant density,
the mean weight decreased in every crop except cauliower (Fig. 7.4).
These results suggest that for a given cabbage root y population, the size of
the subsequent population is determined both by plant density and the type of
host crop present. The numbers of pupae were related to plant density by the
power of 0.7 (the value of the combined slopes, Fig. 7.3) indicating that a tenfold
increase in plant density in summer planted brassica crops should result in an
approximate vefold increase (antilog 0.7) in the cabbage root y population
available for infestation the following spring, provided no density dependent
mortalities occur during the winter period.
Fi g. 7 . 3 . The relationship between plant density and the number of pupae of the cabbage root y
produced per m
2
on four types of cultivated plants: swede (), cauliower (), cabbage () and
Brussels sprouts () (after Finch et al., 1976).
Chapter.7 10/7/00 11:24 am Page 249
7 . 6 M i xed and I nt ercroppi ng
One of the features of modern agriculture is
an ever increasing tendency towards the
use of monocultures (Theunissen and Den
Ouden, 1980). These have allowed agricul-
ture to become intensied and more easily
manageable with a high input mechanized
approach to farming. In tropical countries,
the use of monocultures is practised only
on larger farms or estates, while the more
traditional approaches to farming utilize
polycultures. The polycultures include
mixed intercropping (no distinct row
arrangement), row intercropping (one or
more crops planted in rows), strip inter-
cropping (crops grown in different strips,
wide enough to permit independent culti-
vation), relay intercropping (two or more
grown simultaneously for part of the life
cycle of each, a second crop being planted
before the harvest of the rst) (Andrews
and Kassam, 1976) and alley intercropping
(annual crops are grown in strips between
trees) (ICRISAT, 1989). Most of the food
consumed in tropical Asia, Latin America
and Africa is produced in such systems
which often more readily meet the needs of
the smaller scale farmer than does the
monocrop (Perrin and Phillips, 1978). A
mixed or intercropping regime can provide
a greater total land productivity as well as
insurance against the failure or unstable
market value of any single crop. In addi-
tion crops in intercropping systems may
improve soil fertility and the availability of
alternative sources of nutritious products
(Risch et al., 1983) as well as reducing the
incidence of insect pest attack (Tingey and
Lamont, 1988) and thereby maintaining
lower pest control costs. Intercropping has
been studied sufciently for there now to
250 Chapter 7
Fi g. 7 . 4 . The relationship between plant density and the weight of pupae of the cabbage root y
produced per plant for swede (), cauliower (), cabbage () and Brussels sprouts () crops
grown during the second and third generations of ies in 1974. point omitted from cabbage
regression (after Finch et al., 1976).
Chapter.7 10/7/00 11:24 am Page 250
be a considerable body of evidence to show
that it can be used to reduce the incidence
of pest insects (e.g. Theunissen and Den
Ouden, 1980; Tukahirwa and Coaker, 1982;
Uvah and Coaker, 1984; Tingey and
Lamont, 1988; Edwards et al., 1992; Khan
et al., 1997). For this reason, policy makers
in tropical countries continue to give atten-
tion to improving production in traditional
intercrops, rather than replacing them with
capital and energy intensive technology
(Perrin and Phillips, 1978). In more inten-
sive systems, monocrops are maintained
because with high inputs, they are eco-
nomic despite susceptibility to pests. For
these reasons, it is unlikely that intercrops
will play any major role within the frame-
work of intensive crop production, except
perhaps in smaller scale farming enter-
prises and horticulture, and as a result
most intercrop studies will remain perti-
nent to situations in tropical countries
(Coaker, 1990).
One of the major problems has been pre-
dicting which cropping systems will
reduce pest abundance, since not all com-
binations of crops will produce the desired
effect and blind adherence to the principle
that a more diversied system will reduce
pest infestation is clearly inadequate and
often totally wrong (Gurr et al., 1998). In an
examination of 150 studies involving a
total of 198 plant damaging insect species,
53% were found to be less abundant in a
more diversied system, 18% were more
abundant, 9% showed no difference and
20% showed a variable response (Risch et
al., 1983). Clearly the majority of the
species were less abundant in more diver-
sied systems but 38% were either more
abundant or produced a variable response.
This indicates the need for caution and a
greater understanding of the mechanisms
involved to explain how, where and when
such exceptions are likely to occur. It will
only be through detailed ecological studies
that such an understanding can be gained
and an appropriate predictive theory devel-
oped. This means a greater emphasis has to
be placed on detailed ecological experi-
ments rather than on purely descriptive
studies of relative insect abundance under
different cropping systems. Since there are
numerous possible intercrops and a multi-
tude of conditions under which such sys-
tems could be utilized, there is little
likelihood that each of these could be
investigated (Herzog and Funderburk,
1986). Hence, it is necessary to understand
the underlying mechanisms to allow
extrapolation to various other cropping
systems and situations (Gurr et al., 1998).
7 . 6 . 1 Ecol ogi cal t heory and exper i ment at i on
The ecological theory relating to the bene-
ts or otherwise of mixed versus simple
cropping systems revolves around the two
possible explanations for experimental evi-
dence that insect pest populations obtain
higher levels in less diverse cropping sys-
tems compared with diverse ones. The two
hypotheses proposed by Root (1973) are:
1. The natural enemy hypothesis which
argues that pest numbers are reduced in
more diverse systems because the activity
of natural enemies is enhanced.
2. The resource concentration hypothesis
argues that the presence of a more diverse
ora has direct negative effects on the abil-
ity of the insect pest to nd and utilize its
host plant.
The resource concentration hypothesis
(alternatively called the disruptive crop
hypothesis; Vandermeer, 1989) predicts
lower pest abundance in diverse communi-
ties because a specialist feeder is less likely
to nd its host plant due to the presence of
confusing masking chemical stimuli (e.g.
Uvah and Coaker, 1984), physical barriers
to movement (Perrin and Phillips, 1978) or
other environmental effects such as shad-
ing (Risch, 1981); it will tend to remain in
the intercrop for a shorter period of time
simply because the probability of landing
on a non-host plant is increased; it may
have a lower survivorship and/or fecundity
(Bach, 1980).
The extent to which these factors oper-
ate will depend on the number of host
plant species present and the relative pref-
erence of the pest for each, the absolute
Cultural and Interference Methods 251
Chapter.7 10/7/00 11:24 am Page 251
density and spatial arrangement of each
host species and the interference effects
obtained from non-host plants (Risch,
1981). If the density of a host species is low
and it is well distributed among non-host
plants, then an insect approaching the
habitat will have greater difculty in locat-
ing its host than if the host density is high
relative to non-hosts and if its distribution
is clumped. Also, the concentration of the
host resource may inuence the probability
of the insect staying in a habitat once it has
arrived. For instance, an insect pest may
tend to y earlier, further or straighter after
landing on a non-host plant resulting in a
more rapid movement from habitats with a
low resource concentration (Risch, 1981).
The natural enemies hypothesis attrib-
utes lower pest abundance in intercropped
or more diverse systems to a higher density
of predators and parasitoids (Bach, 1980).
The greater density of the natural enemies
is caused by an improvement in conditions
for their survival and reproduction, such as
a greater temporal and spatial distribution
of nectar and pollen sources, which can
increase parasitoid reproductive potential
and an abundance of alternative hosts/prey
when the pest species are scarce or at an
inappropriate stage (Risch, 1981). These
factors can in theory combine to provide
more favourable conditions for natural ene-
mies and thereby enhance their numbers
and effectiveness as control agents.
The question then arises, which of the
two hypotheses is the most important for
inuencing the relative abundance of pest
insects in diverse systems. The question
has been approached in two ways: (i)
reviews of the literature relating to crop
diversity and pest abundance; and (ii) by
experimentation. The rst of these studies
by Risch et al. (1983) has been referred to
above, and this concluded that the resource
concentration hypothesis was the most
likely explanation for reductions in pest
abundance in diverse systems, but it
pointed out that the mechanisms to sup-
port this had rarely been studied. Nineteen
studies that tested the natural enemy
hypothesis were reviewed by Russell
(1989). Of these 19 studies, mortality rates
from predators and parasitoids in diverse
systems were higher in nine, lower in two,
unchanged in three and variable in ve.
Russell (1989) concluded that when evalu-
ated, the natural enemy hypothesis was
conrmed and considered the two
hypotheses complementary. When studies
on intercrops were compared with
crop/weed systems, Baliddawa (1985)
found that 56% of pest reductions in
crop/weed studies were caused by natural
enemies compared with 25% in the inter-
crop studies, although intercrops probably
slowed pest colonization.
The most comprehensive of the studies
(Andow, 1991) classied pests as
monophagous or polyphagous and
reviewed 254 herbivore species of which
56% were lower in diverse systems: 66%
for monophagous herbivores and 27% for
polyphagous ones. Predator and parasitoid
numbers were higher in diverse habitats in
48% and 81% of studies respectively.
Andow (1991) concluded that of the two
hypotheses, resource concentration was
probably of more importance. When
annual and perennial crops are considered
separately, the resource concentration
hypothesis seems most likely for annual
crops whereas the natural enemy hypothe-
sis is most likely for perennial and some
annual crops (Cromatie, 1991). Overall, the
review studies conducted would indicate
that the two hypotheses are probably com-
plementary in many systems (Wratten and
van Emden, 1995) although there have
been too few studies that clearly elucidate
the mechanisms involved.
Experiments to determine the impact of
the two mechanisms are possible because
they each make different assumptions
about how diversication will affect
monophagous and polyphagous insects
(Risch et al., 1983). The natural enemies
hypothesis predicts that the numbers of
monophagous and polyphagous pests
should be equally reduced in a monocrop
and an intercrop because natural enemies
do not prey differentially on these groups.
However, if the resource concentration
252 Chapter 7
Chapter.7 10/7/00 11:24 am Page 252
hypothesis is more important, then only
the monophagous insect species should be
less common in the intercrop than the
monocrop. The polyphagous pest species
that has an equal preference for all the
crops in an intercrop should be equally
abundant in both cropping systems. Risch
(1981) carried out an experiment to test
which hypothesis inuenced pest abun-
dance when the pests were six species of
chrysomelid beetle and the polycrop and
monocrop were composed of corn (Zea
mays), beans (Phaseolus vulgaris) and
squash (Cucurbita maxima; Fig. 7.5). There
were both monophagous and polyphagous
species among the six pests studied and
measures of rates of parasitism, beetle
counts and beetle movement all suggested
the resource concentration hypothesis
accounted for the differences in beetle
Cultural and Interference Methods 253
Fi g. 7 . 5 . The spatial arrangement of corn, bean and squash plants within monocultures, dicultures and
tricultures, in an experiment to determine the relative effect of resource concentration or natural enemies
on the abundance of six species of chrysomelid beetles (after Risch, 1981).
Chapter.7 10/7/00 11:24 am Page 253
abundance between the monocrops and
polycrops. The evidence supporting this
was summarized by Risch (1981) as fol-
lows:
1. There were no measurable differences
in predation or parasitism of beetles
between treatments.
2. The number of beetles per host was
lower in the polycrop than the monocrop
only when there was a non-host plant pre-
sent in the polycrop. When two host plants
were present in the polycrop, then the
numbers of beetles per host plant were in
fact higher in the polycrop than in the
monocrop. This pattern of abundance
would be predicted only if beetle move-
ments and not mortality due to natural ene-
mies was responsible for differences in
beetle abundance.
3. Direct measurements of beetle move-
ments in the eld showed that beetles
tended to emigrate more from polycrops
that included a non-host plant than from
host monocrops.
Such experiments are very involved and
complicated, especially the work needed to
assess insect movement (Wetzler and
Risch, 1984) but more such work and
experiments are required if it is ever going
to be possible to predict reliably pest abun-
dance in yet untried intercrop or polycrop
systems.
7 . 7 Semi ochemi cal s
Semiochemicals are chemicals that mediate
interactions between organisms (Nordlund,
1981). They are divided into two major
groups: pheromones, which mediate in
intraspecic interactions and allelochemi-
cals for interspecic interactions. Each of
these groups can be subdivided further:
allelochemicals as allomones, kairomones,
synomones and apneumones (Table 7.7)
and pheromones as sex pheromones, alarm
pheromones and epideitic or aggregation
pheromones. While the majority of
research and development has concen-
trated on pheromones, particularly those of
lepidopteran pests, there is now an increas-
ing diversity of interest in the isolation and
use of semiochemicals (behaviour modify-
ing chemicals) that act as repellants,
antifeedants, attractants and stimulants.
7 . 7 . 1 Types of behavi our modi fyi ng
chemi cal s
Sex pheromones are used by males to locate
females for mating. Typically, female
Lepidoptera emit pheromone for a specic
period during the day in order to attract
males. The pheromone gland in the nal seg-
ments of the abdomen is extruded so that the
pheromone is released to move downwind
as a plume of odour. A resting or ying male
that detects the pheromone will y into the
wind and follow the plume by upwind
anemotaxis (orientation with respect to the
direction of the wind). On arriving near the
female, the high concentration of odour per-
ceived by the male causes a reduction in for-
ward ight speed and further orientation
over the last few centimetres will be both by
chemical sensing and visual means (Shorey,
1977). Copulation may then take place. A
large number of the sex pheromones of
Lepidoptera have now been identied but
the behavioural sequences involved in the
detection and tracking leading to successful
mating has rarely been studied. If insect
behaviour is to be manipulated successfully,
a greater emphasis will need to be placed on
understanding mate-nding behaviour. In
this way, the weakest link in a response
sequence can be identied and more effec-
tively exploited.
In some insectplant interactions, there
is an optimum density for the survival of
the insects. Among several insect species,
there exist epideitic pheromones that
enable insects to aggregate to an extent nec-
essary to efciently exploit a host or habi-
tat. Such aggregation pheromones can also
prevent the accumulation of insects at a
given site extending beyond the optimum
range (Jackson and Lewis, 1981). These
aggregation pheromones are found mostly
in beetle species of which some of the best
studied examples are of forest insect pests
such as Dendroctonus spp., Trypondendron
254 Chapter 7
Chapter.7 10/7/00 11:24 am Page 254
lineatum and Gnathotricus sulcatus
(Borden, 1990).
Alarm pheromones, epitomized by (E)-
-farnesene in aphids, are released when
insects are under threat. The aphid alarm
pheromone is released when individuals
are attacked by predators or parasitoids
eliciting increased activity amongst nearby
individuals. Alarm pheromones basically
elicit an escape response increasing move-
ment and thus preventing or reducing their
chances of attack. They have had only lim-
ited use in applications for pest control
although they have potential for use in
novel ways. For example, (E)--farnesene
has been used to increase the mobility of
aphids so that contact pesticides such as
pyrethroids are more readily picked up
(Pickett, 1988), while simple components
of the honey bee sting and mandibular
gland can be used to repel benecial forag-
ing bees from oilseed rape during insecti-
cide applications (Free et al., 1985).
Among the allelochemicals, there are
probably fewer practical examples of the use
of apneumones (an attractant produced by a
non-living substance such as food or ovipo-
sition substrate) than with pheromones,
allomones and kairomones. Allomones are
substances that when produced by plants
can reduce insect feeding and/or fecundity
by their toxicity, or act as antifeedants and
repellents (Panda and Khush, 1995). The
identication of the phenylpropanoid, 4-
allylanisole, a compound produced by many
conifers including loblolly pine (a preferred
host of the southern pine beetle
Dendroctonus frontalis) as a repellent,
enabled its use to protect pines in urban
environments (Hayes et al., 1994; Hayes and
Strom, 1994; Hayes et al., 1996). Methyl sali-
cylate and ()-(1R, 5S)-myrtenal are both
plant derived repellents for the black bean
aphid Aphis fabae (Hardie et al., 1994).
Methyl salicylate is associated with sec-
ondary metabolite based defence in plants,
Cultural and Interference Methods 255
Tabl e 7 . 7 . The different types of semiochemical involved in insect communication (after Nordlund, 1981).
Pheromone
A substance that is secreted by an organism to the outside and causes a specic reaction in a receiving
organism of the same species
Sex pheromone: a substance generally produced by the female to attract males for the purposes of mating
Aggregation pheromone: a substance produced by one or both sexes, and bringing both sexes together for
feeding and reproduction
Alarm pheromone: a substance produced by an insect to repel and disperse other insects in the area. It is
usually released by an individual when it is attacked
Al l el ochemi cal
A substance that is signicant to organisms of a species different from its source, for reasons other than food
Allomone: a substance produced or acquired by an organism that, when it contacts an individual of another
species in the natural context, evokes in the receiver a behavioural or physiological reaction that is
adaptively favourable to the emitter but not the receiver, e.g. repellents, antifeedants, locomotor excitants
Kairomone: a substance produced or acquired by an organism that, when it contacts an individual of
another species in the natural context, evokes in the receiver a behavioural or physiological reaction that is
adaptively favourable to the receiver but not the emitter, e.g. feeding or oviposition stimulants
Synomone: a substance produced or acquired by an organism that, when it contacts an individual of
another species in the natural context, evokes in the receiver a behavioural or physiological reaction that
is adaptively favourable to both emitter and receiver
Apneumone: a substance emitted by a non-living material that evokes a behavioural or physiological
reaction that is adaptively favourable to a receiving organism but detrimental to an organism of another
species that may be found in or on the non-living material
Chapter.7 10/7/00 11:24 am Page 255
and the monoterpenoid ()-(1R, 5S)-myrte-
nal is metabolically related to ()-(1S, 5S)--
pinene, a component of defensive resins
produced by gymnosperms. Hardie et al.
(1994) argue that these two compounds are
employed by A. fabae as indicators of nutri-
tionally unsuitable or non-host plants.
Methyl salicylate has also been demon-
strated to act as a repellent in other aphid
species, Rhopalosiphum padi (Wiktelius and
Pettersson, 1985), Sitobion avenae and
Metapolophium dirhodum (Pettersson et al.,
1994).
Antifeedants have potential in affecting
levels of pest colonization when applied to
crops thus reducing feeding damage and
virus transmission (Pickett et al., 1987). A
number of compounds have been impli-
cated for aphids including azadirachtin,
polygodia and hop -acids (Powell et al.,
1997) but to date the most successfully
deployed antifeedant in the eld has been
drimone ()-polygodial, extracted from the
water-pepper Polygonum hydropiper
which, when applied to barley against
aphids, decreased the transmission of bar-
ley yellow dwarf virus (Dawson et al.,
1986; Pickett et al., 1987).
Kairomones are used by insect pests to
locate host plants and by natural enemies to
locate their prey. Volatile compounds
released by a plant or from prey gland
secretions, frass, honeydew or cuticular
secretions, may be detected from minute
traces in the air and are used to assist host
location. Aphids have been shown to uti-
lize kairomonal olfactory cues in their envi-
ronment to locate host plants (Nottingham
et al., 1991; Lsel et al., 1996) while contact
with aphid, scale and mealybug honeydew
arrest both parasitoids, lacewings and
cocinellid predators (Budenberg, 1990;
Hgvar and Hfsvang, 1991; Heidari and
Copland, 1993; McEwen et al., 1993; Merlin
et al., 1996; Lilley et al., 1997). Kairomones
are also sequestered and utilized by insects
as pheromones. The female western pine
beetle Dendroctonus brevicornis which
attacks ponderose pine in North America is
attracted to its host by oleoresin. The
female attracts males by a pheromone, one
of whose chemical constituents have been
sequestered from the trees oleoresin
(Edwards and Wratten, 1980).
When herbivore pests damage crop
plants, they may release synomones that
attract parasitoids. The parasitoid
Epidinocarsis lopezi is attracted to cassava
plants that release a synomone when fed
upon by mealybugs Phenacoccus manihoti
(Nadel and van Alphen, 1987). The para-
sitoids of the brassica pod midge
Dasineura brassicae are attracted to iso-
thiocyanates released by brassicas. It has
been possible to attract these natural ene-
mies into a trap using 2-phenylethyl isoth-
iocyanate (Murchie et al., 1995; Pickett et
al., 1995).
7 . 7 . 2 M ass t rappi ng
Mass trapping, as its name implies, is the use
of large numbers of pheromone traps to catch
a large proportion of the pest population.
This technique has proved unsuccessful for a
whole range of lepidopteran and coleopteran
pests (Campion, 1989; Jones and Langley,
1998). Lepidopteran sex pheromones only
attract the males, hence to be successful,
highly efcient traps are needed in order to
catch a high enough proportion of the male
population to prevent mating with females.
Mass trapping is more appropriate with
aggregation pheromones, since these attract
both males and females. As part of an IPM
programme, mass trapping has proved useful
in the control of the cotton boll weevil
(Anthonomus grandis; Dickerson, 1986) and
the spruce bark beetle Ips typographus (Raty
et al., 1995; Grgoire et al., 1997). In a large
mass trapping programme aimed at the
control of I. typographus in Norway
(19791980), the aggregation pheromone
component 2-methyl-3-buten-1-ol was dis-
pensed in over 600,000 traps and captured
7.4 billion beetles in 2 years (Bakke et al.,
1983). Damage caused by the beetle was
signicantly reduced in the forest around the
traps.
7 . 7 . 3 M at i ng di sr upt i on
The use of pheromones for mating disrup-
tion is potentially a very powerful tool in
256 Chapter 7
Chapter.7 10/7/00 11:24 am Page 256
insect pest management. The technique is
based on the premise that male insects
would be unable to locate females if the
environment around the female is perme-
ated with sex pheromone (Jackson and
Lewis, 1981). However, the precise mode
of action remains speculative (Card,
1990). Three factors were proposed by
Shorey (1977) that may act alone or in
combination to produce the mating disrup-
tion effect, sensory adaptation, habituation
and direct competition. Sensory adapta-
tion may occur because after prolonged
exposure, the olfactory sensory neurones
no longer detect the pheromone.
Habituation is the situation in which the
insects stop responding to a stimulus if
earlier responses did not lead to a proper
result, while direct competition may occur
if males are ying to pheromone sources
instead of females, which reduces the
chances of successful mating. Card (1990)
proposed a further three: camouage of the
natural pheromone plumes by a high con-
centration of synthetic pheromone, an
imbalance in the sensory input where the
synthetic pheromone has unnatural ratios
of components, and pheromone antago-
nists that reduce the attractiveness of
pheromones. Card (1990) concluded that
for most mating disruption systems, sev-
eral mechanisms were operative and that
the biggest outstanding problem was
knowing the behaviours to be modied
and the sensory inputs that modulate these
reactions. Only with this knowledge
would mating disruption be fully under-
stood.
The technique of mating disruption
has been successfully used to control the
pink bollworm Pectinophora gossypiella
(Campion, 1989), the lesser peach tree
borer Synanthedon pictipes (Pfeiffer et al.,
1991), the European grape berry moth
Eupaecilia ambiguella (Neuman, 1990), the
artichoke plume moth Platyptila car-
duidactyla (Campion, 1989), codling moth
Cydia pomonella (Charmillot, 1990; Barnes
et al., 1992; Howell et al., 1992; Pfeiffer et
al., 1993) and gypsy moth Lymantria dis-
par (Kolodny-Hirsch and Schwalbe, 1990).
The mating disruption technique has
proved very successful on an area-wide
basis and probably has yet more to offer in
terms of species and cropping systems
where it may be suitably operated.
Pheromone formulations appear to be com-
pletely non-toxic to man and other higher
animals and natural enemy numbers are
increased in pheromone treated areas (see
Case Study). Close cooperation among
growers, government research bodies and
the agribusiness is needed to yield further
exciting possibilities in this eld.
Cultural and Interference Methods 257
Case St udy: M at i ng di sr upt i on for t he cont rol of t he pi nk bol lwor m
( Pect i nophora gossypi el l a) i n cot t on ( El - Adl et al . , 1 9 8 8 )
Pectinophora gossypiella is a pest of cotton that is difcult to control by conven-
tional insecticides because the timing of application is critical to ensure that the
newly hatched larvae are killed before they penetrate the owers and bolls. The
control of this pest by sole use of the mating disruption technique was rst
achieved in Egypt in 1981 using a micro-encapsulated formulation of the boll-
worm pheromone (Critchley et al., 1983). The use of a micro-encapsulated for-
mulation produced results equal to those of insecticide use. The following
account is of work conducted to compare the efcacy of three pheromone formu-
lations, hollow plastic bres, plastic laminate akes and the micro-encapsulated
formulation with the standard insecticide application in larger scale eld trials.
Each treatment was applied to a 100 ha block of cotton and there were replicate
blocks only for the hollow plastic bres. The insecticide treatment was carried
out on a site of similar size in the same locality.
Chapter.7 10/7/00 11:24 am Page 257
258 Chapter 7
The micro-encapsulated formula was applied at 10 g a.i. ha
1
from the air at a
height of 3 m using conventional boom and nozzle equipment. The hollow bre
formulation was also applied by air at a rate of 3 g a.i. ha
1
from a height of 15 m
using specially designed applicators. For logistic reasons, the rst two applica-
tions of laminate akes were made by hand, later aerial applications at a rate of 7
g a.i. ha
1
from a height of 15 m were made, also using a specially designed
applicator. The pheromone formulations were each applied four times while six
applications were made in the insecticide treatment. There was some partial
insecticide use in some of the pheromone treated areas to control Spodoptera lit-
toralis.
The following criteria were used to assess the efcacy of the pheromone and
insecticide treatments:
1. The daily catches of three pheromone traps in each treatment area.
2. Weekly samples of 500 bolls from each treatment to evaluate boll infestation.
3. Yield loss estimates were made at the end of the season by determining the
proportion of incorrectly opened bolls in a sample of 100 taken from each treat-
ment.
4. The average yield from each treatment replicate was estimated by weighing
the yield from all plants within a 10 m
2
area in the middle of the plot.
5. Weekly sweep net catches of natural enemies were made in a 1 ha site in
each treatment.
6. The relative costs of the pheromone and insecticide applications.
The results of this extensive experiment can be summarized as follows:
1. In all the pheromone treated areas moth catches were greatly reduced follow-
ing treatment compared with those in the insecticide treated area.
2. In none of the areas did boll infestations reach 10% damage levels.
3. The estimated yield losses due to P. gossypiella were all low, with a maxi-
mum in the insecticide treatment of just under 5%.
4. The same trend was reected in the average yields with all the treatments
having a high yield but the lowest yield occurring in the insecticide treatment
(Fig. 7.6).
5. Benecial insects were found in greater numbers in the pheromone treated
areas compared with those treated with insecticides. The seasonal totals were
6620 in the laminate ake treatment, 14,463 in the micro-encapsulated treat-
ment, 10,747 and 18,743 in the two replicates of the hollow-bre treated area
compared with a total of 4094 in the insecticide treated area.
6. The cost of the seasonal application of the pheromones (1988 prices) was
lower (78.90) than that of an insecticide (107.79) mainly because of the lower
xed cost of the pheromones. The cost of aerial application was the same for the
different products at 14.55 for four applications.
The three pheromone formulations offer different advantages and disadvan-
tages. The glue based hollow bre and laminate ake formulations can be used to
treat plots faster (Table 7.8) and with greater pilot safety in the presence of obsta-
cles on the ground such as trees and telegraph poles as they give a ying altitude
of 14 m. Spraying is also possible throughout the day because the glue based for-
mulations are unaffected by high temperatures. The micro-encapsulated formula-
tion (unlike the other two pheromone formulations) requires no special
equipment for application or pilot training since it uses conventional spraying
equipment. If required, application costs may be reduced by mixing additional
Chapter.7 10/7/00 11:24 am Page 258
Cultural and Interference Methods 259
substances such as fertilizers or trace elements to the spray mix. In rural areas,
and where aerial application is not possible, application of the glue based formu-
lations would have to be made by hand whereas a knapsack sprayer could be
used for the micro-encapsulated formulation.
Fi g. 7 . 6 . The estimated averages of cotton yield weights in pheromone and insecticide treated
elds (after El-Adl et al., 1988).
Tabl e 7 . 8 . A comparison of the area treated in one ight, the application and reloading times for
the hollow bre, laminate ake and micro-encapsulated P. gossypiella pheromone formulation,
when compared with spraying conventional insecticides, all using an Air Tractor aircraft (after El-
Adl et al., 1988).
Micro-encapsulated Laminate ake Hollow bre
pheromone pheromone pheromone
formulation formulation formulation Insecticide
Number of hectares
treated in one ight 50 200 130 50
Application time
in minutes 30 75 60 30
Time for aircraft
reloading in minutes 15 5 5 15
Chapter.7 10/7/00 11:24 am Page 259
7 . 7 . 4 Lure and ki l l t ar get syst ems
The lure and kill approach utilizes semio-
chemical attractants (pheromones, kairo-
mones, apneumones or empirically derived
chemical attractants) to lure the insect to
the attractants source which has been
treated with chemical insecticides or
biopesticides. The insect picks up a lethal
dose of the insecticide (referred to in this
case as an affector; Lanier, 1990) and subse-
quently dies. The treated source may be a
part of a crop, a tree or a specically
designed target. When applied to crops and
trees, sprayable formulations of the insecti-
cide and attractants are used. Unlike with
conventional insecticide application which
has to be applied to the whole crop to pro-
vide protection, sprayable lure and kill for-
mulations can be applied to only part of the
crop, thereby reducing the amount of active
ingredient applied and levels of environ-
mental contamination. An aerial applica-
tion of pheromone/insecticide mixture for
control of the olive y Bactrocera oleae
could be delivered in a 20 m swath every
100 m of olive grove so that only 20% of the
crop is treated (Howse et al., 1998). The use
of such approaches have been shown to be
practical and economically viable (Montiel,
1992). The majority of lure and kill systems
have however, not been applied to crops
but to target devices, which differ from
mass trapping only in that the insect is not
entrapped at the source of the attractant but
is subjected to a dose of insecticide. The
rst successful attempt at using a target lure
and kill strategy was made by Steiner et al.
(1965) on the island of Rota in the Marianas
to eradicate Bactrocera dorsalis. The potent
parapheromone methyl eugenol was mixed
with an insecticide and applied to 5 cm
breboard squares which were thrown from
aircraft. Eradication was achieved within 6
months (Jones and Langley, 1998). The
same approach has been successfully
utilized for control of B. dorsalis in
Northeastern Australia (Broughton et al.,
1998) and on the island of Mauritius
(Seeworthrum et al., 1998) and in the
Japanese Ogasawara islands (Koyama et al.,
1984).
Target devices treated with food attrac-
tants and insecticides to control Bactocera
oleae in olive groves in Greece (Haniotakis
et al., 1991) and tsetse ies Glossini spp. in
Zimbabwe baited with acetone and octenol
(two components from the odour of host
cattle) (Vale et al., 1985) have also been
shown to be successful. Targets that utilize
insect growth regulators and chitin synthe-
sis inhibitors have also been developed
(e.g. Howard and Wall, 1996a; Langley,
1998) (these are considered in Section 7.8.1
dealing with autosterilization).
7 . 7 . 5 M ani pul at i ng nat ural enemi es
Carbohydrate and protein food sources are
important for natural enemies for energy
and reproduction. In nature, carbohydrates
may be obtained from prey or host uids,
homopteran honeydew and plant nectar
(van Driesche and Bellows, 1996). Protein
is obtained from pollen of wild owers and
weeds. Under circumstances where it is
thought these resources may be limiting,
they can be provided as an articial appli-
cation, e.g. as sugar or molasses. In addi-
tion, since these resources can act as
attractants to natural enemies, applications
can be used to manipulate populations.
Chrysoperla carnea is an important
generalist egg predator that has been the
subject of a number of attempts at manipu-
lation using semiochemicals. Field applica-
tions of articial honeydew (usually a
mixture of sucrose, yeast and water) have
been used to enhance the impact of
chrysopid populations in various cropping
systems including potato (Ben Saad and
Bishop, 1976), cotton (Hagen et al., 1971),
apples (Hagley and Simpson, 1981) and
olives (McEwen et al., 1993, 1994; Liber
and Niccoli, 1998). L-Tryptophan, a compo-
nent of some articial honeydews, has
been shown to be effective at attracting
and/or arresting chrysopid adults in treated
olive trees (McEwen et al., 1994) (Table
7.9). However, it has consistently proved
more difcult to demonstrate reductions in
pest numbers or reduced damage as a
result of such applications (McEwen et al.,
1993). The use of semiochemicals for
260 Chapter 7
Chapter.7 10/7/00 11:24 am Page 260
manipulating natural enemies provides
some promise but it is clear that there is an
area where more research is required
before semiochemicals are in practical use
as a component of an IPM system.
7 . 8 St er i l e I nsect Techni que and
Aut ost er i l i z at i on
The sterile insect technique (SIT) is most
well known for its use to control the screw
worm of cattle Cochliomya hominivorax,
in the USA (Davidson, 1974) and more
recently in North Africa (Lindquist et al.,
1992). Female ies oviposit on the wounds
and cuts of living animals where the larvae
feed and cause harm to the animal, damage
the hide and carcass and, in severe cases,
death of the animal (Drummond et al.,
1988). The rst large-scale trial of SIT was
made on the island of Curaao in the
Lesser Antilles. Flies, sterilized by gamma-
rays, released by air at the rate of three ies
per hectare per week, eradicated the screw
worm in three to four generations
(Davidson, 1974).
After this initial success another pro-
gramme was initiated in Florida in 1958,
where four ies per hectare per week were
released. In June 1959, the last screw worm
infestation was recorded and the cost of the
programme had only been (approximately)
US$7 million, estimated to be about a third
of the potential annual losses in livestock
to screw worms in the area. This success
provided the incentive for the next even
more ambitious programme, to eradicate
the screw worm from 12.9 million hectares
in Texas and other Western States of the
USA and to establish a 160 km wide barrier
zone along the MexicoUS border to pre-
vent reinfestation from Mexico.
In 1962, a rearing facility produced 100
million ies a week that were being used
for release in Texas. These releases caused
a dramatic decline in the number of
reported screw worm cases between 1962
and 1964, and by 1967, screw worms had
been ofcially declared as eradicated from
the USA, although invasions from Mexico
did still occur. To reduce the number of
invasions, an agreement was reached to
extend the SIT programme in Mexico. This
programme also proved effective and by
1983, there were no screw worm cases
reported in the USA (Drummond et al.,
1988).
Since this major success, a number of
other attempts were made to control a
range of pests by SIT including mosquitoes
(Morlan et al., 1962; Weidhaas et al., 1962),
horn ies Haematobia irritans (Kunz et al.,
1974), heel y Hypoderma lineatum (Kunz
et al., 1984), the Mediterranean fruit y
Ceratitis capitata (Mellado, 1971) and the
blowy Lucillia sericata (MacLeod and
Donnelly, 1961). However, while in many
of these and other cases experimental work
has suggested a good likelihood of success,
in practice the technique has proved too
expensive to be used on a large scale or lit-
tle more than temporary local population
suppression was achieved (Wall, 1995). In
general, SIT has found very limited practi-
cal use and tends to be feasible only when
dealing with isolated populations of a par-
ticularly virulent pest and a high value
Cultural and Interference Methods 261
Tabl e 7 . 9 . Numbers of green lacewings trapped 1, 2 and 6 days after application on 23.6.92 of a tryptophan
spray that delivered 2 g of L-tryptophan per tree. There were 64 non-coloured sticky traps in each treatment.
Numbers of lacewings
Days after
spraying Sprayed trees Control trees t-test P value
2
P value
1 30 7 0.0004 P < 0.001
2 39 15 0.0014 P < 0.010
6 82 36 0.0018 P < 0.001
Chapter.7 10/7/00 11:24 am Page 261
product. The extensive rearing facilities
required to breed and release large num-
bers of insect makes application expensive
and the additional public relations prob-
lem of releasing billions of insect pests
(often noxious blood feeding adult insects)
makes effective control problematic (Wall
and Shearer, 1997).
The use of SIT involves the mass rearing
of the pest species, its sterilization and its
release. Control is theoretically obtained
through the mixing of the sterile insects,
usually male, with the wild population,
leading to a reduction in the fertility and,
hence, population suppression. The degree
of suppression obtained will be dependent
on the competitiveness of the released
males compared with their wild counter-
parts and the ratio of sterile to wild males
(Fig. 7.7). Sterility may be induced through
cytoplasmic incompatibility, hybrid steril-
ity or through dominant lethal mutations.
Sterility through cytoplasmic incompatibil-
ity occurs when a cross between two appar-
ently conspecic populations results in
only a partial embryonation in some ova,
i.e. no fusion occurs between the spermato-
zoa and the ova (Boller, 1987). Hybrid
sterility, which is available at present only
for the suppression of Heliothis virescens
(Lindquist and Busch-Peterson, 1987)
involves the release of backcross insects
derived from a cross between females of
Heliothis subexa and H. virescens males.
The progeny from this consist of fertile
females and infertile males. When the fer-
tile females mate with the males, the prog-
eny again consists of the fertile females and
infertile males, and this can continue indef-
initely, or at least until there is a dilution of
males due to wild populations entering the
area. This technique is thought to have
some potential, but little work is presently
being done to locate closely related species
or strains which result in hybrid sterility
(Lindquist and Busch-Peterson, 1987).
The most commonly used SIT involves
dominant lethal mutations that are induced
either by irradiation or chemosterilization.
Irradiation with gamma- or X-rays used to
be considered preferable to chemosterilants
because available chemosterilants posed a
risk to humans and the environment
(Campion, 1972). However, the availability
of safer chemical sterilants (IGRs and
chitin synthesis inhibitors) have now made
it possible to develop alternative, cheaper
systems for achieving insect sterilization.
These techniques combine target systems
with chemical sterilants and are referred to
as autosterilizing systems (Jones and
Langley, 1998).
7 . 8 . 1 Aut ost er i l i z at i on syst ems
Autosterilization systems overcome many
of the drawbacks of SIT; there is no need to
rear and release large number of insects or
to sterilize them by irradiation. The
autosterilization systems utilize target sys-
tems that attract insects to a surface treated
with IGRs or chitin synthesis inhibitors
(Wall and Howard, 1994; Howard and
Wall, 1996a; Jones and Langley, 1998),
which then affects subsequent reproduc-
tive success. Although in principle, the use
of autosterilizing systems is the same as
target systems (Section 7.7.4), the potential
for effective efcient pest suppression by
autosterilization is in some respects much
greater (Howard and Wall, 1996a). This is
because the sterilized insects cannot repro-
duce which is equivalent to killing and
secondly these individuals continue to
compete for mates with remaining normal
262 Chapter 7
Fi g. 7 . 7 . The number of wild insects of either sex
remaining in a population subjected to the release
of a constant ratio of released males, equivalent to
the initial number of fertile females (solid line). Also
the change in ratio of released males (R) to wild (W)
insects of either sex (dashed line) (after Wall, 1995).
Chapter.7 10/7/00 11:24 am Page 262
individuals which will result in non-viable
progeny (Wall and Howard, 1994; Wall,
1995). The affect is most pronounced if
both male and females of the target species
can be attracted and sterilized (Langley and
Weidhaas, 1986).
Examples of autosterilization systems
include use of yellow cloth or plastic sheet
treated with pyriproxifen to control green-
house whitey, black and white targets
treated with triumuron to control the
lesser housey Fannia canicularis in com-
mercial rabbit houses, and control of
midges in sewage beds (Langley, 1998).
Populations of housey Musca domestica
have also been suppressed using autosteril-
ization in commercial poultry houses in
India (Howard and Wall, 1996a).
Cultural and Interference Methods 263
Case St udy: Cont rol of M usca domest i ca i n poul t ry uni t s usi ng
aut ost er i l i z at i on ( H oward and W al l , 1 9 9 6 a, b)
The housey Musca domestica is amongst the most well known and familiar
nuisance pests of human and livestock habitations (West, 1951). The abundance
of organic waste material in animal houses combined with shelter and elevated
temperature provide an ideal habitat for houseies. Poultry houses are particu-
larly prone to severe infestations with losses due to M. domestica estimated at
US$60 million in 1976 in the USA (Anon, 1976; Axtell and Arends, 1990).
The use of autosterilization of M. domestica dates back to the 1960s when
alkylating agents such as tepa, metepa, hempa and apholate were used as
chemosterilants (La Brecque and Meifert, 1966; La Brecque et al., 1962, 1963;
Gouck et al., 1963). More recently, the chitin synthesis inhibitor, triumuron has
been shown to prevent egg hatch and larval development (e.g. Table 7.10) in the
laboratory populations.
Field trials carried out at a poultry house in Bhubaneswar in North-East India
indicated the potential of autosterilization systems. Targets consisted of 20
50 cm rectangles of white polyester cloth treated with a triumuron suspension
and 50% w/v sucrose solution and stapled to a wire frame. Control targets were
treated with 50% w/v sucrose solution alone. Fifty treated targets were placed in
each of two treatment houses, suspended in ve rows of ten. Similarly, 50
untreated (sucrose only) targets were suspended in the control house. Sampling
had been initiated 2 weeks prior to introduction of the targets and this was con-
tinued at every 4872 hour intervals for a further 6 weeks.
Tabl e 7 . 1 0 . The detransformed mean percentage egg hatch (SE) in 5 day periods following 24 h
exposure of adult houseies, Musca domestica, to sucrose-baited targets dosed with 3%
triumuron suspension concentrate. In treatment 1, both sexes were exposed to the triumuron
treated targets; in treatment 2, only females were exposed; in treatment 3, only males were
exposed; in the control, neither sex was exposed to triumuron.
Detransformed mean percentage egg hatch (SE)
Days after
exposure Treatment 1 Treatment 2 Treatment 3 Treatment 4
5 3.4 (2.8) 7.8 (4.6) 42.5 (10.3) 91.9 (2.4)
610 42.0 (4.3) 53.8 (8.1) 65.8 (4.6) 91.2 (1.5)
1115 62.9 (4.8) 77.7 (2.8) 74.0 (3.4) 92.6 (1.3)
16 76.8 (3.6) 83.5 (2.1) 80.2 (5.3) 88.2 (1.5)
Chapter.7 10/7/00 11:24 am Page 263
7 . 9 D i scussi on
Cultural control encompasses techniques
such as crop rotations and intercropping
that have a long history of successful use.
These are techniques that have been tested
and rened over generations by trial and
error and passed on to each new genera-
tion as the conventional accepted practice.
However, the trend towards large scale
monoculture and high input farming has
led to a widespread abandoning of cultural
control as the techniques appeared unnec-
essary when compared with the high level
of control that could frequently be
obtained by insecticides alone (Coaker,
1987). For instance crop rotation is a tradi-
tional technique used to both maintain
soil fertility and reduce the incidence of
pests, but the availability and use of chem-
264 Chapter 7
The number of M. domestica caught in all three houses showed signicant
changes over time (F = 15.89, df = 9.81, P < 0.001) and was signicantly different
between the control house and the treatment houses (F = 1.85, df = 18.81, P <
0.03). To illustrate this, the difference between the catch in the control and each
of the treatment houses has been plotted in Fig. 7.8. Targets were introduced on
day 14, following which the population in the treatment house dropped steadily
relative to the control, until it was lower than that in the control house.
Subsequently, the targets were removed on day 59, following which the housey
population increased and exceeded that in the control house.
Fi g. 7 . 8 . Difference in Musca domestica catch at each sample date, between treatment house one
and the control house. In treatment house one, 50 triumuron impregnated, sugar baited targets
were suspended between days 14 and 59, where day 1 = 15 March 1995. In the control house,
50 targets, baited with sugar only, were suspended over the same period. The deviation from zero
(solid line) shows the change in the Musca domestica population in the treatment house relative
to that in the control (after Howard and Wall, 1996a).
Chapter.7 10/7/00 11:24 am Page 264
ical fertilizers and insecticides reduced
the need for rotations and hence they have
gradually become a less important compo-
nent of intensive farming systems.
However, cultural control is not just about
the use and reintroduction of old tradi-
tional techniques, although this may be
relevant in many situations (especially
where there is concern about excessive use
of fertilizers and pesticides). There are
more modern cultural/agronomic practices
that can enhance productivity and have an
important role in IPM, the use of reduced
tillage and direct drilling techniques, for
instance, as alternatives to traditional land
cultivation. These can be used to reduce
the time and effort required for land
preparation, provide greater control over
sowing time and also enable a larger area
to be cropped (Webster and Wilson, 1980).
Hence, there is a need to look more widely
than just traditional methods for possible
techniques that can be utilized in cultural
control while evaluating new ways of
incorporating the essential elements of tra-
ditional approaches into more modern sys-
tems. The subjects in cultural control that
have been considered in this chapter (con-
dition of the host, modication of the
physical environment, crop rotation,
tillage and planting date, intercropping
and sowing/planting density) do not cover
all types of cultural control. The subjects
covered here were chosen because there
are some well documented examples of
each, but more importantly because they
illustrate the point that links exist between
different areas of cultural control. For
instance, host condition cannot be sepa-
rated from manipulation of the physical
environment or intercropping effects from
plant density, despite the fact that they are
too often considered in isolation.
In order to get at the underlying princi-
ples, there is a need for a greater under-
standing of the ecology of pest/host
interactions. This necessitates more
detailed studies of the processes contribut-
ing to the infestation and exploitation of
the host by the pest insect, for instance the
role of host odour and other stimuli, and
the inuence of these on rates of immigra-
tion and subsequent dispersal. Such stud-
ies take time and at present there are too
few researchers considering the problems.
It is this long-term approach rather than
short-term comparisons of various cultural
treatments that will yield the general prin-
ciples that will unify the concepts of cul-
tural control and make the approach more
widely acceptable. Whether the technique
orientated approach of cultural control
will gain sufcient credence without the
driving force of product development
still remains to be seen.
It is interesting to note, when consider-
ing these broader issues of ecological
principles in IPM, that the concepts con-
sidered important in cultural control, i.e.
the processes of host location, coloniza-
tion, reproduction, survival and disper-
sion, are the same ones that are important
in host plant resistance, and in a slightly
different way in the location and preda-
tion/parasitism of pests by natural ene-
mies. In host plant resistance, the problem
is one of genetic differences between indi-
vidual plants of the same crop species and
the effects this may or may not have on
pest infestation, etc. The situation in cul-
tural control is on a different scale,
genetic heterogeneity over space and time
between different crop species, e.g. crop
rotation, intercropping, mixed cropping,
and yet the location, colonization, repro-
duction, survival and dispersal of hosts by
the pest remain the essential components
of the interaction. These components are
also evident in natural enemy/pest inter-
actions especially in pest/parasitoid inter-
actions. It is upon these three types of
control option (host plant resistance, nat-
ural enemies and cultural control) that
traditional farming systems have been
based and it is perhaps within these areas
that we should search for the unifying
concepts in IPM, within which more mod-
ern control techniques such as chemical
insecticides, behaviour modifying chemi-
cals and biotechnology can be placed in
context. However, before this can really
happen our understanding of the
Cultural and Interference Methods 265
Chapter.7 10/7/00 11:24 am Page 265
processes involved in cultural control
techniques must be brought up to the
level of that of host plant resistance and
natural enemy studies, without which cul-
tural control will continue to provide the
weak link in the chain.
266 Chapter 7
Chapter.7 10/7/00 11:24 am Page 266
8.1 Introduction
Legislation, regulations and voluntary
codes are used at national and interna-
tional levels to ensure good practice in pest
management, to govern the safe use and
availability of pest control products, the
quality of food and other products that
require treatment against pests and the
introduction of exotic organisms across
national boundaries. Such legislation, etc.
takes many forms and has a major impact
on farming practices, the agribusiness and
the consumer.
The legislation passed by governments
can be one of two types, it is either passed
as direct acts, orders or regulations or it is
enabling legislation that authorizes other
bodies (usually Ministries of Health and
Agriculture) to issue rules, orders or direc-
tives. In most cases the legislation pro-
duced by governments will not intrude on
the day-to-day practice of IPM but in spe-
cic cases it can have a signicant and
major impact on the general approach
taken. One example of the role of legisla-
tion, that of dening quarantine regula-
tions, is discussed below. This is one form
of legislation that is generally applied
throughout the world but other laws may
be more specic to particular situations
and circumstances. For instance, in East
Africa there is legislation to ensure that
there is a closed season for cotton growing
in order to prevent a population build-up
of the pink bollworm (Pectinophora
gossypiella), a monophagous pest of cotton
(Hill and Waller, 1982). Legislation can
also be used to ban the application of
insecticides during specic periods, such
as the ban imposed in Colombia on the use
of synthetic pyrethroids to control the
tobacco budworm Heliothis virescens on
cotton during periods of maximum ower-
ing (Sawaki and Denholm, 1989). This was
carried out as part of a strategy to manage
insecticide resistance in this cropping sys-
tem. Such control by government through
legislation will generally only occur where
the imposition of certain changes is sure to
guarantee major national economic or envi-
ronmental benets. The circumstances
under which such legislation occurs will
be dependent on the situation, and no gen-
eral point can be made other than the obvi-
ous need to ensure that the legislation
imposed by government can actually be
put into practice.
Farmers who do not implement weed-
ing of Echinocloa spp. (alternate hosts of
stemborers Chilo spp.) in Burkina Faso are
ned (Zethner, 1995) whereas in the case
of the legislation in East Africa for the con-
trol of the pink bollworm, the law stipu-
lates that all cotton plants should be
uprooted and destroyed by a certain date
in order to kill the diapausing larvae.
However, many peasant farmers do not
bother to destroy old plants by the
appointed date and so in some areas there
8
Legislation, Codes of Conduct and Conventions
267
Chapter.8 10/7/00 11:25 am Page 267
268 Chapter 8
is considerable survival of diapausing lar-
vae (Hill and Waller, 1982). In this situa-
tion, the legislation reects a genuine need
but the lack of a means to implement and
police it effectively reduces its chances of
success.
The legislation, codes of conduct and
conventions that deal with issues relevant
to IPM are mainly concerned with quaran-
tine regulations, registration of hazardous
materials (pesticides and genetically modi-
ed organisms), food quality standards and
the exchange and exploitation of biological
diversity.
8.2 Quarantine Regulations
The increasing levels of trade and transport
links between countries and continents has
meant an increased risk of accidental intro-
duction and spread of pest insects (Dowell
and Gill, 1989; Singh, 1988; Zimmerman,
1990; Section 6.7). Species that were previ-
ously capable of dispersal only over short
distances by natural processes can now be
transferred inadvertently from country to
country or from one geographical region to
another by means of fast international
transport links. The threat of the accidental
introduction of a major pest species which
could potentially cause massive problems
for agriculture, forestry or public health
has encouraged governments to take steps
to reduce the likelihood of such introduc-
tions occurring. Generally this is achieved
through the enforcement of what are gener-
ally referred to as quarantine regulations.
Quarantine regulations are produced by
governments to reduce the chances of pests
being introduced on articles imported from
foreign countries. The legal basis of such
quarantine is either legislation passed as
acts, orders and regulations or enabling
legislation that authorizes a body, usually
the Ministry of Agriculture, to issue rules,
orders or directives specifying which arti-
cles are prohibited for importation, the
exceptions to this ruling, and the condi-
tions under which such imports can be
made (including the need for permits,
inspections, treatments and quarantines
(Kahn, 1982)). The articles in question may
be plants, plant parts or materials, agricul-
tural cargoes, soil, containers, packing
material, plant growing media, baggage or
mail; any article that could potentially har-
bour a novel pest may need to be prohib-
ited from entry. Pests such as viruses and
bacteria that are transmitted in plant cut-
tings and soil are particularly difcult to
nd and exclude. Insect pests, although a
problem, probably represent less of a con-
cern for the regulatory authorities.
In a survey of pests named in quaran-
tine regulations in 125 countries, 614 were
species of insects and mites (Kahn, 1982).
Of these, the ten most frequently cited
pests are listed in Table 8.1. Although
major pests, these ten insects are not likely
to be moved by natural means between
regions, except perhaps for species such as
Leptinotarsa decemlineata and fruit ies
which can be dispersed on wind currents.
Generally there is little point in regulating
against pests if their dispersive ability will
inevitably lead to their introduction,
although quarantine measures may slow
down their rate of spread.
The importation of living plants or plant
parts represents the greatest hazard for
introduction of exotic insects. For instance,
imported germplasm, used to improve
national crop breeding programmes, has a
very great potential for facilitating the
transfer of exotic pests (Kahn, 1983; Verma
et al., 1988). It is all a question of balanc-
ing the risk associated with an importation
of the germplasm with the potential bene-
ts from the new plant material. The bene-
ts from the imported material must
exceed the economic or environmental
costs should an exotic pest be transported
and become established. Risk is the princi-
pal element considered in the development
of plant quarantine regulations (Kahn,
1977). The pest risk is the actual or per-
ceived threat of moving pests of quarantine
signicance along man-made pathways,
and risk is dened by an entry status
which reects the regulations, policies,
procedures or decision made by quarantine
Chapter.8 10/7/00 11:25 am Page 268
ofcials (Kahn, 1983). The entry status of a
pest is represented by a continuum with
conservative policies (and hence restric-
tive) at one end of the scale and liberal and
unrestrictive policies at the other. A biolog-
ically sound position is reached when the
pest risk is matched with the attitude
towards entry status. Thus, a sound posi-
tion would occur when a high pest risk is
matched by a conservative entry status, or
a low pest risk with liberal entry status
(Kahn, 1983). However, positions other
than those based on a match between risk
and entry status may be taken. An econom-
ically based position would be inuenced
by the relative costs of effective quarantine
compared with control if a pest entered the
country. A conservative entry status might
be adopted even for pests of low risk
because the benets from safe importation
exceed the potential control costs of an
inadvertent introduction. Alternatively, a
high pest risk and a liberal entry status
might be employed by governments
importing grain during periods of famine
or food shortage (Kahn, 1983). In general,
the optimal strategy to be taken by the
regulatory authorities would be to adopt a
biologically sound position where the
resources allocated for the entry status of a
pest are matched by the pest risk.
Internationally, regulations usually
specify risk categories and safeguards with
imported plant germplasm. If the pest is
categorized as prohibited, the risks of its
introduction are great, and the existing
safeguards to prevent entry are probably
considered inadequate. Under such prohi-
bitions importation will probably also not
be permitted even to government services.
Post-entry quarantine procedures will be
adopted for pests in the high risk cate-
gories for which adequate safeguards to
prevent entry can be provided by transit
through a government quarantine station.
A restricted entry category for a pest would
mean that a permit is required for the
importation of material likely to harbour
the pest. Plants will be subject to inspec-
tion and treatment on arrival. The no per-
mit restricted category is similar to the
restricted category but without the require-
ment for a permit. Some plants may fall
within the unrestricted category which
would allow unrestricted entry without the
need for permits or inspection, etc.
Plants are grown in quarantine at spe-
cial quarantine stations when it is not
Legislation, Codes of Conduct and Conventions 269
Table 8.1. The ten most frequently cited insects in the quarantine regulations of 125 countries (after Kahn,
1982).
Insects
Number of countries
Scientic name Common name citing organisms
Quadraspidiotus perniciosus San Jos scale 44
Leptinotarsa decemlineata Colorado potato beetle 40
Ceratitis capitata Mediterranean fruit y 39
Rhagoletis pomonella Apple maggot 33
Bactrocera dorsalis Oriental fruit y 28
Popillia japonica Japanese beetle 28
Anthonomus grandis grandis Boll weevil 21
Anastrepha ludens Mexican fruit y 20
Rhagoletis cerasi Cherry maggot 20
Phthorimaea operculella Potato tuberworm 19
Chapter.8 10/7/00 11:25 am Page 269
possible to certify the imported plant mate-
rial as healthy and free from all pests and
diseases. The quarantine stations have
facilities where plants can be grown in bio-
logical isolation under high phytosanitary
conditions until freedom from pests and
diseases is assured. This is usually for a
period long enough to break the life cycle
of harmful pests or to extend beyond the
duration of the normal resting stage of the
insect. Third country quarantine is also
sometimes used. Temperate countries are
often used for the quarantine of tropical
clonal or perennial crops because it is
unlikely that the exotic tropical pest could
survive if it escaped. If pests are found on
imported material they may then be sent to
a third country for the purposes of pest
control (Hill and Waller, 1982).
Plant material under the restricted cate-
gory will be inspected on arrival and
treated if there is any suspicion of pest con-
tamination. With insect pests insecticides
often as fumigants are the common form of
treatment (e.g. Yokoyama et al., 1992,
1993a) but excision of plant parts involving
removal of lateral branches and leaves (e.g.
for leaf miners) high or low temperature
treatments, irradiation (Benschoter, 1984;
Burditt, 1986; Burditt and Balock, 1985;
Couey et al., 1985; Leibee, 1985) or even
compression may be considered appropri-
ate (e.g. Yokoyama et al., 1993b). Heat treat-
ment may be administered by hot water, air
or vapour heat. The plant material is raised
to a temperature that will kill the pest but
not the plant. It has been used to control
insects and mites in narcissus bulbs and
strawberry runners (Kahn, 1977), the
Caribbean fruit y (Anastrepha suspensa)
in mangoes (Sharp, 1986; Sharp et al.,
1989) and Dacus spp. in papaya (Couey et
al., 1985). Such measures should, however,
be unnecessary when the exporting country
has checked the material to certify that it
meets the health standards for the import-
ing country, although countries which lack
well developed quarantine capability are
more inclined to accept material certied
elsewhere than countries having extensive
services.
The ability to evaluate the hazard posed
by the accidental introduction of exotic
organisms also applies to those agents
which are introduced for the purposes of
biological control. Although biological con-
trol is generally thought to offer an envi-
ronmentally benign alternative to
pesticides, this does not mean they will
have no environmental impact. Once an
alien biological control agent has been
introduced and established, it is often very
difcult or impossible to eradicate. The
growing interest in developing and utiliz-
ing biological control agents, particularly
for augmentative releases (mainly macrobi-
ologicals; Section 6.9) and biopesticides
(pathogens; Section 6.8) has meant a larger
number of organizations are now involved
in the introduction of potentially alien
species. Such trends have identied the
need for generally agreed standards for pro-
cedures for the introduction of non-indige-
nous natural enemies and a promotional
effect to ensure both practitioners and reg-
ulatory authorities are well informed of the
risks as well as the opportunities (Waage,
1996). The FAO Council ratied a Code of
Conduct for the Import and Release of
Exotic Biological Control Agents in 1995
which recommends that governments
establish authorities responsible for regu-
lating introductions and ensuring that risks
are properly evaluated. The Code species
that organizations intending to introduce
an alien biocontrol agent should prepare a
dossier that provides information on both
the pest and the natural enemy and indi-
cates the risk involved to non-target
species. The value of this Code is not so
much in its precise wording but the oppor-
tunity it offers to harmonize safety proce-
dures for biological control introductions
across regulatory authorities worldwide
(Waage, 1996).
8.3 Regulation of Pesticides
The regulation of pesticides, which in the
context of pest management often refers to
both chemical and biological pesticides, is
270 Chapter 8
Chapter.8 10/7/00 11:25 am Page 270
usually carried out by a government
agency. In the USA, these responsibilities
are held by the Environmental Protection
Agency (EPA) and the Food and Drug
Administration (FDA), while in the UK, the
role of providing regulatory oversight is
held by the Pesticides Safety Directorate
(PSD). At an international level, the
Organisation of Economic Co-operation
and Development (OECD; an inter-govern-
mental organization with 29 member coun-
tries), United Nations Food and Agriculture
Organisation (FAO) and the World Health
Organisation (WHO) play important roles
in the harmonization of pesticide proce-
dures and regulations and to reduce the
negative impact of pesticide use.
The FAO have produced an
International Code of Conduct on the distri-
bution and use of pesticides (FAO, 1986).
Article 6.11 states: governments should
take action to introduce the necessary legis-
lation for regulation, including registration
of pesticides and make provisions for its
effective enforcement, including the estab-
lishment of appropriate educational, advi-
sory, extension and health care services.
Registration should take full account of
local needs, social and economic condi-
tions, level of literacy, climatic conditions
and availability of pesticide application
equipment. The registration of pesticides
by government authorities according to
stipulated regulations provides the main
method by which the distribution and use
of pesticides can be controlled by legisla-
tion. Each new pesticide should be
approved before it can be imported and
sold within a country as this is the only real
means by which governments can ensure
that only those products deemed suitable to
their particular needs and circumstances
are made available. Two methods of
restricting availability can be exercised: (i)
not registering the product; or (ii) imposing
conditions on registration and restricting
the availability to certain groups or users in
accordance with national assessments of
the hazards involved in the use of the prod-
ucts (Article 7.3; FAO, 1986). Thus, the reg-
istration procedure and the regulations
governing the amount and type of informa-
tion that needs to be produced by the
industry in support of their application for
product registration must be appropriate to
ensure that only those products that are
suitable are accepted. Hence governments
provide legislation to ensure that the regis-
tration procedures for insecticides are strin-
gent enough to reduce the hazard to the
users and general public (thereby allaying
public fears), objective enough to satisfy
scientic opinion, while not placing such a
heavy burden on insecticide development
that they are uneconomical to produce.
Whether the legislation produced to date
has achieved a balance between these
opposing inuences is a matter for debate.
There are three terms that are commonly
used in reference to pesticide safety: toxic-
ity, hazard and risk. Toxicity refers to the
capacity of an insecticide to cause harm,
while hazard is the state of affairs that can
lead to harm and risk is the probability of
that particular event occurring (Barnes,
1976; Copplestone, 1985; Berry, 1994).
The toxicity of a substance is dependent
on the dose administered or degree of
exposure and each insecticide will pro-
duce a dose-response relationship with the
organisms against which it is tested. The
degree of toxicity is usually measured as
the proportion of test organisms that die in
a given sample. The dose at which 50% of
a large population of test organisms are
killed is called the LD
50
(LD = lethal dose),
expressed in milligrams of substance per
kilogram of body weight. An insecticide
having a low LD
50
is more toxic than one
having a high LD
50
. Hazards, by contrast
are evaluated on the reverse scale. A high
hazard represents a greater problem than a
low hazard. Hazard is very rarely assessed
numerically, instead it is considered in rel-
ative terms, according to the effects on a
particular organism under specied cir-
cumstances. For instance, a hazard would
be given a low rating when organisms are
exposed infrequently to very low doses of a
microbial insecticide, having a low toxic-
ity, via a route of entry that would occur in
only unusual circumstances.
Legislation, Codes of Conduct and Conventions 271
Chapter.8 10/7/00 11:25 am Page 271
The route by which an insecticide
enters the body is particularly important in
assessing the level of hazard because some
routes are more likely to cause poisonings
than others. There are four recognized
routes: oral, dermal absorption, inhalation
and inoculation. Insecticides that are taken
in orally and through dermal absorption
represent the greatest hazard. Ingestion of
an insecticide may occur if a spray opera-
tor drinks, eats or smokes during applica-
tion, or, more rarely, directly swallows the
insecticide. Dermal absorption usually
occurs when areas of skin are exposed to
spray or dust particles during preparation
for application or during application itself.
Dermal toxicity is lower than oral toxicity
but it is enhanced when skin is warm and
sweating, conditions that may occur in a
temperate summer or in tropical countries
(Copplestone, 1985). The hazard posed by
the inhalation of insecticides is usually
quite low because most droplets or dust
particles used in insecticides are too large
to be readily inhaled. The entry of insecti-
cides through inoculation is the situation
in which they are taken up through broken
skin, cuts, scrapes and rashes; provided
wounds are adequately covered inocula-
tion does not present a problem. However,
in developing countries there may be a
greater risk because suitable dressings may
not be available and farmers often walk
barefoot with cracked and sore feet. In
these circumstances insecticide poisoning
through inoculation could be considered a
hazard.
The different elements of toxicity, haz-
ard and routes of entry have provided the
basis for safety testing insecticides. The
types of study undertaken as part of the
hazard identication process in pesticide
regulation is given in Table 8.2. From these
data, an acceptable daily intake (ADI) for
use in consumer risk assessment is derived
(Harris, 1998). The ADI is dened as the
amount of a chemical which can be con-
sumed every day of an individuals entire
lifetime in the practical certainty, on the
basis of all known facts, that no harm will
result. The ADI is based on data of no-
observed adverse effect levels in a repre-
sentative sensitive animal species or
humans.
Another measure that is used by regula-
tory authorities to advance acceptable stan-
dards of safety for pesticides is the
maximum residue level (MRL). The US EPA
sets food tolerance levels for residues for
each chemical insecticide to ensure that
any residues remaining on produce will be
below what is considered to be safe levels
272 Chapter 8
Table 8.2. Toxicology studies assessed as part of the hazard identication process in pesticide registration.
Type of study Used to assess
Pharmacokinetics and metabolism Absorption, distribution, metabolism and excretion of pesticides
Acute single dose Effects of high dose exposure after gastrointestinal, skin or eye
exposure
Repeat dose (short-term to life-time) Effects ranging from behavioural changes to alterations at the
biochemical level (e.g. enzyme and hormone changes) and
macroscopic/microscopic level changes (e.g. cancers)
Mutagenicity Effects on chromosomes and DNA
Reproductive Effects on reproduction and offspring neurotoxicity effects on the
(teratogenicity/multi-generation) nervous system
Dermal absorption The rate and amount of absorption of pesticides through skin
Human surveillance data and
biomonitoring Effects on operators or less frequently volunteers
Chapter.8 10/7/00 11:25 am Page 272
(Zalom and Jones, 1994). MRLs are primar-
ily used as a trading standard for bulked or
composite samples rather than individual
crop items (Harris, 1998). The regulatory
authority is responsible for ensuring that
any variation of residues within a bulked
sample which conforms to the appropriate
MRL does not give rise to an unacceptable
risk to the consumers when individual
items are consumed. A renement of the
MRL has been the Supervised Trial Median
Residue (STMR) level. The STMR takes
into account that 70% of samples analysed
do not contain residues and consumer eat-
ing patterns to provide what is thought to
be a more realistic measure to estimate the-
oretical maximum daily intake (TMDI) or
more recently the national estimated daily
intake (NEDI). However, even these more
rened measures do not take into account
the fact that children receive greater expo-
sures (on a mg kg
1
of body weight basis),
consume widely varying levels of food,
multiple residue impacts and non-dietary
exposure (Luijk et al., 1998). Thus, there
are still opportunities for rening the regu-
latory standards to ensure that pesticides
are safely used. Some would argue that the
costs of maintaining such regulatory sys-
tems and of managing pesticide risk is too
high (estimated at $17 billion (19711995)),
about 7.4% of gross pesticide sales in the
USA (Benbrook et al., 1996), and that a
shift is needed away from reducing pesti-
cide problems to nding safer effective pest
control methods. Even though biopesticides
may provide a solution to part of this prob-
lem, it is unrealistic to believe that pest
management will at some future time not
require chemical insecticides. It is just a
matter of whether the chemicals can be
made more selective and less damaging to
the environment. There is every indication
that this is the direction that the pesticide
industry is moving.
8.4 Regulation of GMOs
A large number of organizations and indi-
viduals have expressed concerns about the
potential environmental impacts of geneti-
cally modied organisms (GMOs). In terms
of regulatory issues, concerns relate to the
need to consider indirect and cumulative
effects of GM crops (in particular their use
in conjunction with chemicals), the possi-
bility of gene transfer from GM crops to
wild relatives and contamination through
cross pollination of non-GM crops by GM
crops (Hill, 1998).
The basis for environmental safety of
genetically modied organisms in the USA
and Europe is one of substantial equiva-
lence, where the novel product is com-
pared to a closely related product that has
an accepted standard of safety (WHO,
1991, 1995; OECD, 1993; FAO/WHO,
1996). The assessment occurs in two steps,
the rst being agronomic characteristics
and the composition of the novel product
and of the traditional counterpart are com-
pared to assess equivalence within the lim-
its of natural variation. Secondly, the
introduced change is characterized and
assessed to ensure there is no harm to
human health and the environment (Knig,
1998). This process involves a molecular
characterization and safety assessment of
the introduced proteins.
The regulatory system for GMOs in the
USA is under the overall guidance of the
EPA through the Federal Insecticide,
Fungicide and Rodenticide Act (FIFRA)
and the USDA regulate import, movement,
eld trials and commercial release of
GMOs under the Federal Plant Pest Act
and the Plant Quarantine Act, adminis-
tered by the Animal and Plant Health
Inspection Service (APHIS). In Europe, the
European Union implemented Directive
90/220/EEC in 1990 deals with the release
and commercialization of GMOs. The
Directive outlines the procedures for envi-
ronmental safety evaluations for Europe,
but approvals for eld trials are issued by
national authorities. However, approval for
commercialization of a GMO product can
only be gained by a complex authorization
procedure in which all EU member states
participate (Landsmann, 1998). This
process is inevitably time consuming so
Legislation, Codes of Conduct and Conventions 273
Chapter.8 10/7/00 11:25 am Page 273
that in Europe it can take between 17
months and two years to gain product
approval compared to the USA where the
whole process takes on average 5 months
(Knig, 1998). The biotechnology industry
consider that GMOs represent new hope
for feeding the worlds growing population
(Stbler and Kern, 1998). The extent to
which the industry is allowed to meet that
goal will depend on convincing the regula-
tory authorities that their products indeed
offer a safe, low risk opportunity for invig-
orating agricultural production and crop
protection.
8.5 The Convention on Biological
Diversity
The most important international event
of recent years has been the United
Nations Conference on Environment and
Development (UNCED) held in Rio de
Janeiro in 1992 which produced a docu-
ment, the Convention on Biological
Diversity, that was later ratied in 1995 by
142 countries around the world. The Rio-
Conference, commonly known as Agenda
21, includes a chapter on Promoting
Sustainable Agriculture and Rural
Development (Agenda 21: Chapter 14) that
deals exclusively with the problems of pes-
ticide overuse and the need to promote
effective alternatives under the general
banner of Integrated Pest Management.
Agenda 21 states:
Chemical control of agricultural pests has
dominated the scene but its overuse has
adverse effects on farm budgets, human
health and the environment, as well as
international trade. Integrated Pest
Management, which combines biological
control, host plant resistance and appropri-
ate farming practices and minimises the use
of pesticides, is the best option for the
future, as it guarantees yields, reduces
costs, is environmentally friendly and con-
tributes to the sustainability of agriculture.
While some see the Convention as no more
than an expression of goodwill (Pincus et
al., 1999), others have recognized its rele-
vance to the future of pest management, par-
ticularly biocontrol (Waage, 1996), the struc-
ture and focus of international research
organizations and the regulation of pesticide
use (van Emden and Peakall, 1996).
However, as van Emden and Peakall (1996)
point out the target deadlines that were set
in 1992 now seem hopelessly unrealistic.
For instance, the Convention recommenda-
tion to establish operational and interactive
networks among farmers, researchers and
extension services to promote and develop
integrated pest management not later than
1998, has already passed with little progress
made towards achieving this objective. In
other areas, though, the Convention has had
a far reaching impact particularly relating
to the exchange and exploitation of genetic
resources. The signatories to the Convention
may have access to genetic resources (e.g.
pathogen isolates for developing biopesti-
cides) in other countries party to the agree-
ment but only with prior informed consent
of the country concerned, and on the condi-
tion that any studies carried out involve the
scientists from that country and that bene-
ts derived from exploitation of the genetic
resources will be shared in a fair and equi-
table manner. Such global commitments
inevitably change the way in which issues
such as biological diversity are viewed, and
as much as national regulatory legislation
for pesticide registration procedures, has a
place in inuencing the way pest manage-
ment develops and the options that are ulti-
mately available.
8.6 Discussion
Legislation and regulations impact on
many areas of pest management, especially
where products, quality standards and
safety are concerned. Environmental con-
cerns are now considered on a global scale
which is having a similarly worldwide
inuence on how pest management mea-
sures are perceived. A number of contro-
versies exist which need to be dealt with at
a regulatory level. For instance, the legisla-
tion and regulations needed for registration
274 Chapter 8
Chapter.8 10/7/00 11:25 am Page 274
of a pesticide require tests to be carried out
on animals to determine how safe they are.
There are many who object to such use of
animals, and most people would agree that
more appropriate means of assessing
microbial insecticides, for instance, the use
of an oral LD
50
test with a B. thuringiensis
active ingredient are not applicable since
B. thuringiensis will not kill the animals;
even an acute single dose toxicity test does
not cause the animals harm, yet animals
still have to be sacriced and autopsied to
satisfy registration procedures. Clear, perti-
nent protocols need to be established to
cope with these new situations. As has
already been discussed, the big challenge
for the government agencies in the next
few years is to ensure that the protocols for
the development and release of genetically
engineered organisms are stringent enough
to alleviate concern and the possibility of
major environmental disasters.
The controversy that surrounds the sub-
ject of quarantine is concerned with
whether or not quarantine procedures are
effective in keeping out exotic pests. The
argument comes from the fact that it is not
possible to measure how many pests
would have entered a new region had
quarantine procedures not been in opera-
tion (Kahn, 1982). Certainly pests do enter
new regions in spite of quarantines but
there is likely to be no answer to the con-
troversy unless a comparison can be made
between the number of man-made intro-
ductions prior to quarantine procedures
and the number introduced since their
establishment. It is unlikely that any
nation would be willing to withdraw quar-
antine procedures just to test the hypothe-
sis, so we will have to be satised with the
fact that the perceived need for quarantine
measures is high.
Legislation, Codes of Conduct and Conventions 275
Chapter.8 10/7/00 11:25 am Page 275
9.1 Introduction
Agricultural systems rarely remain static,
rather they undergo a continuous series of
changes which are inuenced by govern-
ment policy, economic forces and techno-
logical advances (Norton, 1993). Within
this framework new pest problems arise
which may be the result of a change in
agricultural practice or introduction of a
technology, e.g. secondary pest outbreaks
due to overuse of chemical pesticides. Any
change introduced into a crop system that
is widely adopted by farmers may have
knock-on effects for another component of
that system (Dent, 1995). If this effect is a
negative one then a new problem will have
been created. Over time any number of
changes may combine to create a particular
suite of pest or agronomic problems. In
these circumstances it is self evident that
to clearly dene the extent, nature and
cause of a new pest problem it is necessary
to take an holistic view taking into account
historical inuences, the current control
measures as well as the ecology of the pest
and the cropping system. Time spent on
the systematic, directed and focused deni-
tion of a pest problem, identifying the key
factors inuencing pest status, damage and
control (Norton and Mumford, 1993) is a
vital step in the process of devising appro-
priate solutions to pest problems (Dent,
1995). Solutions may be dependent on a
programme of R&D, advice and education
expressed through an appropriate means of
dissemination (e.g. extension service) or
through farmer experimentation and adop-
tion of their own or introduced practices.
9.2 Dening the Problem
A number of techniques have been devel-
oped that have proved useful for identify-
ing key components and relationships
associated with pest problems, including
historical proles, seasonal or damage pro-
les, interaction matrices and decision
trees (Norton and Mumford, 1993).
9.2.1 Historical prole
An historical prole is most usefully con-
structed in a workshop situation involving
representatives of all relevant stakeholders
(e.g. scientists, farmers, extension person-
nel, input retailers/wholesalers/manufac-
turers) who can provide a range of different
viewpoints and perspectives (Norton 1987,
1990, 1993; Norton and Mumford, 1993).
An historical prole is constructed by con-
sideration of the major factors which may
inuence the pest problem. The changes in
these factors over time are graphed over a
relevant period to the present (Norton,
1990; Fig. 9.1) and the contribution of the
different factors assessed. In Fig. 9.1 the
major developments in the Sudan Gezira
(19251998) are mapped out. From this
prole, it was possible to deduce that the
9
Programme Design, Management and Implementation
276
Chapter.9 10/7/00 11:30 am Page 276
Programme Design, Management and Implementation 277
changes that occurred in the area and rota-
tion of crops in the 1950s probably con-
tributed to the increase in American
bollworm which led to a subsequent
increase in insecticide use. The conse-
quence of this was an increase in whitey
populations (Grifths, 1984). In addition,
cotton production and protection has been
inuenced by institutional and nancial
arrangements which affected farmers
incentives to grow good cotton. Through
highlighting these changes and associa-
tions over time the historical prole pro-
vides a structured means of collating
1925 1945 1965 1985
Tenants
Cotton ha per tenant
Sorghum area
Wheat area
Groundnut area
Fodder area
Cotton area
Bacterial blight
Leaf curl virus
Jassids
American bollworm
Whiteflies
Pesticide applications per year
1925 1945 1965 1985
Fig 9.1. Historical prole for pest problems in the Sudan Gezira (after Grifths, 1984).
Chapter.9 10/7/00 11:30 am Page 277
278 Chapter 9
diverse information, brings a range of
expertise to bear on a problem, and raises
questions to hypotheses relevant to devel-
oping solutions (Norton, 1987).
9.2.2 Seasonal proles and damage matrices
Seasonal proles and damage matrices pro-
vide a simple but effective means of
describing the structure of the pestcrop
system and identifying where information
is lacking or unavailable. A seasonal prole
(Fig. 9.2) maps out the presence of different
life stages of pests, or location of major
pests on the host throughout the cropping
season (Norton, 1979, 1982b). They can
also be used to describe events such as the
timing of agronomic practices or applica-
tion of control measures.
A damage matrix (Table 9.1) is used to
identify which plant parts are damaged by
a complex of pests. It effectively classies
the pest problems according to the type of
damage they cause (Norton, 1982a).
Table 9.1. A damage matrix for pests of apples (after Norton, 1982a).
Codling/ Winter Apple Woolly
Tree components tortix moth Sawy aphid aphid Mites
Vegetative buds *
Leaves * * *
Wood
Fruit buds * *
Blossom trusses * * * * *
Fruitlet * *
Fruit *
Fig. 9.2. A seasonal prole for olive tree pests in Spain (Claridge and Walton, 1992).
Chapter.9 10/7/00 11:30 am Page 278
Programme Design, Management and Implementation 279
9.2.3 Interaction matrices
Interaction matrices identify how the pest
interacts with the physical environment
(climate, weather, soil type), the biotic
environment (the host, natural enemies,
competing species) as well as all the rele-
vant information about the pest itself (life
cycle, host preferences, mobility, fecundity
etc.). A matrix is constructed to allow the
primary effect of any column component
on any row component to be shown
(Norton, 1990; Fig. 9.3). A relationship
between components is identied with a
dot and where the cell is left blank then no
direct relationship is thought to exist. The
dots in a column indicate the primary
effects that component has on a system
while the dots in the rows indicate the var-
ious factors that can have an effect on that
component. Interaction matrices have been
used as a preliminary step in the develop-
ment of simulation models (Holt et al.,
1987; Norton, 1990; Day and Collins, 1992)
where they are used to identify the possi-
ble relationships and interactions between
major components of a system. They also
have an important role to play as a means
of summarizing available information on
the biology and ecology of a pest.
9.2.4 Decision trees
Decision trees provide a means of summa-
rizing the range of options that can be
adopted in managing pest problems. When
used as descriptive tools, decision trees
can identify constraints that prevent cer-
tain options being adopted, determine the
time at which pest management decisions
need to be made and ensure all possible
combinations of strategies are considered
(Norton and Mumford, 1993).
Each branch of a decision tree (Fig. 9.4)
represents a particular pest management
strategy, with the nodes of each branch
indicating decision points. As the season
progresses the number of options diminish
while at the same time information on the
level of pest attack potentially increases.
Thus farmers are in the invidious position
of having increased information as time
progresses but a reduced number of
options with which to implement any form
of control. In this way decision trees can
play a dual role, of problem specication
and as a means of studying problems of
implementation, particularly those associ-
ated with the design of control recommen-
dations.
9.2.5 Understanding the farmer
Insect pest damage is just one production
constraint among many that a farmer has to
consider. There are numerous factors
within a farmers family and the farming
system that can affect the farmers percep-
tion of a pest problem, the pest control
decision-making process and the likeli-
hood of adoption of new technologies and
techniques. It is important that the problem
denition stage of developing an IPM sys-
tem includes and involves farmers; those
individuals who may be the beneciaries
of technology or participants in the
process of development.
Farmers may be categorized according
to characteristics, knowledge, beliefs, atti-
tudes, behaviour goals (Beal and Sibley,
1967). Farmers characteristics are the
known facts about sex, age, education, lit-
eracy, and ethnic background, while
knowledge includes what farmers know
about alternative farming practices, crop-
ping systems, inputs and markets. Farmers
attitudes can be described in terms of feel-
ings, emotions and sentiments that may
inuence, for instance, decisions on
whether or not to accept new ideas and
adopt new technologies. The behaviour of
a farmer is an important variable because
knowledge of the way farmers have
behaved in the past may well help predict
how they will behave in the future. This is
particularly useful in prediction of the util-
ity of credit facilities, adoption of new
technology, use of inputs and pest control
decision making. Beliefs may inuence
both the farmers attitudes and behaviour,
and to some extent their goals. Beliefs are
what the farmer thinks is true, whether cor-
rect or not, and they are based on the
farmers own experience and knowledge.
What a farmer believes is attainable will
Chapter.9 10/7/00 11:30 am Page 279
280 Chapter 9
S
i
t
e
f
e
a
t
u
r
e
s
W
a
t
e
r
l
e
v
e
l
P
l
a
n
t
s
p
a
c
i
n
g
L
a
n
d
p
r
e
p
a
r
a
t
i
o
n
C
r
o
p
d
u
r
a
t
i
o
n
D
e
v
e
l
o
p
m
e
n
t
s
t
a
g
e
C
r
o
p
q
u
a
l
i
t
y
C
r
o
p
s
t
r
u
c
t
u
r
e
M
i
c
r
o
c
l
i
m
a
t
e
t
e
m
p
e
r
a
t
u
r
e
h
u
m
i
d
i
t
y
S
o
g
a
t
e
l
l
a
f
u
r
c
i
f
e
r
a
N
e
p
h
o
t
e
t
t
i
x
s
p
p
.
S
t
e
m
b
o
r
e
r
s
W
h
o
r
l
m
a
g
g
o
t
O
t
h
e
r
s
P
a
r
a
s
i
t
e
s
P
r
e
d
a
t
o
r
s
:
c
a
n
o
p
y
P
r
e
d
a
t
o
r
s
:
w
a
t
e
r
I
n
s
e
c
t
p
a
t
h
o
g
e
n
s
V
i
r
u
s
d
i
s
e
a
s
e
s
F
u
n
g
a
l
d
i
s
e
a
s
e
s
W
e
e
d
s
I
m
m
i
g
r
a
t
i
o
n
D
i
s
p
e
r
s
a
l
a
n
d
m
o
v
e
m
e
n
t
M
a
t
i
n
g
s
u
c
c
e
s
s
O
v
i
p
o
s
i
t
i
o
n
F
e
c
u
n
d
i
t
y
E
g
g
d
e
n
s
i
t
y
E
g
g
s
u
r
v
i
v
a
l
E
g
g
d
e
v
e
l
o
p
m
e
n
t
N
y
m
p
h
d
e
n
s
i
t
y
N
y
m
p
h
s
u
r
v
i
v
a
l
N
y
m
p
h
d
e
v
e
l
o
p
m
e
n
t
W
i
n
g
m
o
r
p
h
S
e
x
r
a
t
i
o
A
d
u
l
t
d
e
n
s
i
t
y
A
d
u
l
t
s
u
r
v
i
v
a
l
A
d
u
l
t
d
e
v
e
l
o
p
m
e
n
t
E
m
i
g
r
a
t
i
o
n
Temperature
Season: wet/dry
Rainfall
Insolation
Wind
Irrigation
Fertilizers
Variety
Seed/transplant
Weeding method
Pesticides
Site features
Water level
Plant spacing
Land preparation
Crop duration
Development stage
Crop quality
Crop structure
Temperature
Microclimate
Humidity
Sogatella furcifera
Nephotettix spp.
Stem borers
Whorl maggot
Others
Parasites
Predators: canopy
Predators: water
Insect pathogens
Virus diseases
Fungal diseases
Weeds
Immigration
Dispersal and movement
Mating success
Oviposition
Fecundity
Egg density
Egg survival
Egg development
Nymph density
Nymph survival
Nymph development
Wing morph
Sex ratio
Adult density
Adult survival
Adult development
Emigration
N. lugens Fauna and flora excluding
rice and N. lugens
Crop
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
9
3
0
3
1
3
2
3
3
3
4
3
5
3
6
3
7
3
8
3
9
4
0
4
1
4
2
4
3
4
4
4
5
4
6
4
7
4
8
4
9
5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
N
.
l
u
g
e
n
s
F
a
u
n
a
a
n
d
f
l
o
r
a
e
x
c
l
u
d
i
n
g
r
i
c
e
a
n
d
N
.
l
u
g
e
n
s
C
r
o
p
R
e
g
i
o
n
a
l
c
l
i
m
a
t
e
M
a
n
a
g
e
m
e
n
t
p
r
a
c
t
i
c
e
s
Fig. 9.3. An interaction matrix for Nilaparvata lugens (after Holt et al., 1987).
Chapter.9 10/7/00 11:30 am Page 280
inuence the farmers and their families
goals and desires, whether they be wealth,
property or status.
A number of techniques have been used
to gain information about farmers, includ-
ing participant observation (Shaner et al.,
1982), surveys (Byerlee et al., 1980) (Table
9.2) and interviews (Reichelderfer, 1989).
Discussions with the farmers will also
allow the researcher to become acquainted
with the farmers terms, concepts and
ideals, which can only lead to a much
deeper understanding of a farmers circum-
stances, farming system, reasoning and
decision-making process (Shaner et al.,
1982). These informal, largely unstructured
interviews and observations made by the
researcher (condition of crops, animals,
farm buildings, tools, pest damage) should
provide an overview of the farmers cir-
cumstances. This information can then be
used to provide direction for research,
highlight potential areas for change and
identify gaps in the researchers knowl-
edge. It will also enable the social scientist
to place a farmer into a recommendation
domain, a group of farmers whose climate,
soils, pest problems and socio-economic
circumstances are sufciently similar that a
single recommendation would be applica-
ble to that group (Reichelderfer, 1989).
9.3 Programme Design
The problem specication, denition phase
of a pest management programme, if carried
out well, is a rather involved process requir-
ing a large number of inputs utilizing multi-
disciplinary expertise. However, to a large
extent IPM programmes are devised without
this comprehensive approach to problem
framing. There are two fundamental reasons
for this: the rst, is that there is no theoreti-
cal framework to aid in the design process
of a pest management programme; and the
second is that there are no organizational
structures available in which the necessary
denition phase of development can be con-
sidered. The lack of a theoretical framework
is evident when questions are asked along
the lines of on what basis should I select a
technique for the control of this pest?, is
this control strategy sustainable?, or which
combinations of control techniques are com-
patible for this pest? At present there exists
only a rudimentary theoretical basis on
which to answer such questions (e.g.
Southwood, 1977a). This need for a theoret-
ical framework in IPM and the form it
should take is considered further through-
out this chapter. The second reason why an
appropriate denition phase of a project
rarely takes place is concerned with the
types of funding provided for research and
the use of inappropriate organizational
structures for IPM research.
The emphasis on specialization in
research has meant that research projects
are considered for funding on a piecemeal
basis and on individual merit. There is lit-
tle or no coordination between projects and
in some cases different institutes working
on similar projects do not know of the
Programme Design, Management and Implementation 281
Fig. 9.4. A decision tree showing a sequence and range of control options available.
Chapter.9 10/7/00 11:31 am Page 281
282 Chapter 9
Table 9.2. The general type of information that should be collected from an exploratory survey (Shaner et al.,
1982).
A. Dates of data collection ..................................... Collector ..............................................................
B. Farm access
Distance to nearest road usable by: e.g. motorcycle, 4-wheel drive vehicle, truck
.................................................................................................................................................................
Distance to nearest all-weather road ........................................................................................................
Distance to other transportation facilities: e.g. river, canal, aireld, railroad
.................................................................................................................................................................
C. Farm land status (hectares) D. Farm land use (hectares)
Privately owned .................................. Crops ..................................
Rented .................................. Other tillable purposes ..................................
Other: e.g. village .................................. Pasture ..................................
or tribal land .................................. Forest ..................................
Total .................................. Other: e.g. sh ponds ..................................
Wasteland ..................................
Note: Totals for C and D should be equal Total ..................................
E. Other information about land
Number and sizes of land parcels in farm ................................................................................................
Distances from farmhouse to eld ...........................................................................................................
Percentages of total farmland suitable for:
Motorized equipment ..........................................................................................................................
Irrigation ..............................................................................................................................................
Access to other land and resources: e.g. community pasture and forest, roadside pasture ........................
.................................................................................................................................................................
F. Farm enterprises: Major enterprise Minor enterprise
Crops: e.g. species, varieties, principal uses.
Cereals ...................................... ......................................
Root crops ...................................... ......................................
Vegetables ...................................... ......................................
Fruit ...................................... ......................................
Other tree crops ...................................... ......................................
Other: e.g. sugar cane, sisal ...................................... ......................................
Animals: e.g. breeds, sex,
number, principal uses ...................................... ......................................
Cattle ...................................... ......................................
Buffalo ...................................... ......................................
Sheep ...................................... ......................................
Goats ...................................... ......................................
Swine ...................................... ......................................
Poultry ...................................... ......................................
Non-agricultural enterprises:
e.g. spinning, weaving, pottery making. ...................................... ......................................
G. Farm labour ............................................................................................................................................
H. Power, equipment and tools
Power ...........................................................................................................................................
Equipment ...........................................................................................................................................
Tools ...........................................................................................................................................
I. Farm buildings and facilities
Storage facilities ...............................................................................................................
Processing facilities ...............................................................................................................
Livestock housing and yards ...............................................................................................................
Irrigation facilities ...............................................................................................................
Chapter.9 10/7/00 11:31 am Page 282
Programme Design, Management and Implementation 283
Table 9.2. Continued
Other ...............................................................................................................
J. Marketing of output ..........................................................................................................................
K. Acquisition of inputs ..........................................................................................................................
L. Estimates of income, expenditure and savings
Farm income .................................................................................................................................
Farm expenditure .................................................................................................................................
Off-farm income .................................................................................................................................
Savings .................................................................................................................................
M. Type of household: e.g. nuclear or extended
Ethnic background ....................................................................................................................
Number in household ....................................................................................................................
Rights and obligations of members by age and sex .................................................................................
Characteristics of members:
Literacy and education ....................................................................................................................
Health ....................................................................................................................
Knowledge: e.g. farming and off-farm experiences .............................................................................
Beliefs: e.g. what the person thinks is true .............................................................................
Attitudes: e.g. feelings, emotions, sentiments .............................................................................
Behaviour: e.g. past actions ...............................................................................................................
Goals .....................................................................................................................................
Other .....................................................................................................................................
N. Miscellaneous: e.g. help from others, obligations .................................................................................
others work. While this approach to
funding research may be highly appropri-
ate for promoting innovative, specialist
projects within a single discipline it is
much less suitable for promoting the objec-
tives of a coordinated multidisciplinary
research effort such as that required for a
research programme in IPM. Even if the
separate components needed for an inte-
grated approach were funded, there would
still be little hope for integration because
no organizational structure exists to coordi-
nate the efforts and direct them towards a
common goal. This lack of an appropriate
organizational structure for management of
research projects has important implica-
tions during both the denition and the
research phases of a programme. During
the denition phase it is important that a
common paradigm of the problem be
developed to integrate the individual goals
of each research group and to provide a
common objective (Dent, 1992, 1995). In
the absence of this, each group will carry
out their own research in isolation from
every other group. This will result in a
number of separate solutions to a number
of unrelated problems, because each group
will perceive their objectives differently
according to their own perceptions and
expertise. Thus, organizational structures
have an important role to play in pest man-
agement research to provide an appropriate
institutional framework within which inte-
gration can take place.
9.3.1 Research status analysis
Part of the process of programme design
requires an analysis of the current status of
research, in order that a programme of R&D
can be properly dened and built on exist-
ing know-how. A good understanding of the
research process enables R&D to be directed
more effectively towards the successful
development of IPM systems (Dent, 1997b).
Research on especially well established
forms of control, e.g. pesticide development
and host plant resistance, tend to follow a
roughly similar sequence or pathway. Such
pathways arise through accumulated expe-
riences of the work of many scientists and
often provide an optimum pathway that can
Chapter.9 10/7/00 11:31 am Page 283
be devised only with hindsight (Dent,
1995). Research pathways are available for
pheromone monitoring systems (see Fig.
2.11), classical biological control (Pschorn-
Walcher, 1977), host plant resistance
(Gallun and Khush, 1980) and biopesticide
development (Baldwin, 1986). They are
also implicit in most of the R&D processes
in pest management. Diagrams of research
pathways provide a simple, visual means of
describing the research process and in addi-
tion allow a systematic appraisal of
progress (Fig. 9.5). The research pathway
can be taken one stage further and a formal
Planning Evaluation and Review Technique
(PERT) which utilizes a critical path analy-
sis in order to identify critical tasks and the
amount of slack available if a programme of
research is to be completed on time (Dent,
1997b). Such approaches provide an
overview of the status of research and the
likelihood of the availability of a new tech-
nology.
9.3.2 Selection of control measures
pest types
The manager now has information about
the pest and the control options available,
but the question then arises, how to select
appropriate control options for the pest
under consideration? Knowledge of the
techniques that have previously been used
successfully will certainly be useful in this
context, but what if the techniques were
not successful or have been successful in
slightly different circumstances? On what
basis should a manager consider the differ-
ent options for control? An outbreak classi-
cation system such as that proposed by
Berryman (1987) (Table 9.3) can be of some
value. For example, suppression with
insecticides may be considered a useful
tactic against pests with sustained or pulse
eruptions, while cultural practices aimed
284 Chapter 9
Fig. 9.5. A hypothetical example of a research pathway for development of an IPM programme.
Chapter.9 10/7/00 11:31 am Page 284
at improving host resistance are useful
strategies for lowering the probability of all
types of outbreaks (Berryman, 1987).
However, what is really required is a theo-
retical framework that will specically
combine a particular pest type with appro-
priate forms of control option. Few
attempts have been made at this and the
work that has been done (Conway, 1976;
Southwood, 1975, 1977a; Stenseth, 1981,
1987) provide only conicting conclusions.
This work does, however, provide the basis
for further studies and forms part of the
much wider need for a more rigorous for-
mal theoretical framework within insect
pest management.
The work of Conway (1976), Southwood
(1977a) and Stenseth (1981, 1987) has
revolved around the concept of r- and K-
selection and, particularly, the extremes of
this rK continuum. r-selected insects have
evolved under highly uncertain and vari-
able environments; they are characterized
by a high rate of increase, strong dispersal
and host-nding ability and a small size
relative to other members of Insecta. These
r-selected insects are particularly good at
exploiting temporary habitats which means
they are ideally suited for effective colo-
nization of short-lived annual crops. The
damage they cause is often a function of
the actual number of infesting insects and
the ability to overwhelm the host. By con-
trast the K pests acquire pest status largely
because of the character or quality of the
damage they cause (Conway, 1984a). The K
pest insect tends to have greater size than
an r pest, a lower potential rate of increase,
a greater competitive ability and a ten-
dency for more specialized food prefer-
ences. Conway (1976) cites sheep ked,
codling moth, rhinoceros beetle and tsetse
y as examples of K pests and the desert
locust, black bean aphid, housey and
black cutworm as examples of r pests.
K- and r-selection is a generalized con-
cept that does not apply to every situation;
r and K strategies are only relative and not
absolute phenomena, i.e. a species is an r
strategist or a K strategist only relative to
Programme Design, Management and Implementation 285
Table 9.3. A general scheme for classifying insect pest outbreaks (from Berryman, 1987).
Pest outbreak Class
1. Outbreaks do not spread from local epicentres to cover large areas Gradient
(a) Short delays in the response of density-dependent regulating factors
(i) Outbreaks restricted to particular kinds of environments
(site or space dependent) Sustained gradient
(ii) Outbreaks follow changes in environmental conditions (time dependent) Pulse gradient
(b) Long delays in the response of density-dependent regulating factors
(i) Outbreaks restricted to particular environments (site or space dependent) Cyclical gradient
(ii) Outbreaks follow changes in environmental conditions (time dependent) Pulse gradient
2. Outbreaks spread out from local epicentres to cover large areas Eruptive
(a) Short delay in the density-dependent response at the low-density equilibrium
(i) Short delay in the density-dependent response at the high-density
equilibrium Sustained eruption
(ii) Long delay in the density-dependent response at the high-density
equilibrium Pulse eruption
(b) Long delay in the density-dependent response at the low-density equilibrium
(i) Short delay in the density-dependent response at the high-density
equilibrium Permanent eruption
(ii) Long delay in the density-dependent response at the high-density
equilibrium Cyclical eruption
Chapter.9 10/7/00 11:31 am Page 285
some other species. To complicate this fur-
ther, the strategy of individuals within a
population is population specic and not
species specic (Stenseth, 1987). This is
because a species may behave as an r or a K
strategist depending on the environment
under which a particular population has
evolved and is living. Obviously, on the
basis of these qualications it is important
that something is known about the habitat
of the species as well as the characteristics
of the population itself.
Southwood (1977b) described the habi-
tat in terms of durational stability and
favourableness. The K strategist will be
selected for in habitats having a high abi-
otic predictability, low biotic predictability
and a high habitat favourability (Stenseth,
1987). The biotic environment (competi-
tors, host defences, natural enemies) plays
the dominating role in the evolution of the
K strategists. Hence, you would expect to
nd K strategists in more diverse environ-
ments than r strategists which are favoured
by higher biotic predictability not low abi-
otic predictability. In an attempt to account
for differences in population regulation
between r and K strategists, Southwood
(1975, 1977a) and Southwood and Comins
(1976) developed a synoptic population
model based on habitat stability, popula-
tion density and population growth (Fig.
9.6). The model is derived from variations
of the natality curve, natural enemy action
and intraspecic competition as expressed
by nine parameters. The response surface
of this model produces some interesting
features that shed some light on the rela-
tive value of different control options. The
major features of the response surface are
the endemic ridge, the epidemic ridge and
the natural enemy ravine (Fig. 9.6).
The entire population of an extreme r
strategist occurs on the epidemic ridge,
286 Chapter 9
Fig. 9.6. The response surface of a synoptic model of population growth (Southwood and Comins, 1976).
Chapter.9 10/7/00 11:31 am Page 286
with the marked uctuations of the boom
and bust dynamics between generations a
consequence of the high r values. Examples
of species suffering such marked changes
may be some aphid species and phy-
tophagous mites (Horn, 1988). The extreme
K strategist lies exclusively within the
endemic ridge where only small amplitude
population uctuations occur and the
population is characterized by the high
survival rate of offspring but a low recruit-
ment rate. The population is often in a
region of equilibrium determined by com-
petition (Southwood and Comins, 1976).
The natural enemy ravine is the area in
the model where natural enemies are
important in the population dynamics of a
pest population. The synoptic model has
shown that where the ravine drops below
the zero growth contour there is a lower
equilibrium point maintained by predation
and a release point R beyond which the
population becomes epidemic. The model
also shows that at both extremes of the rK
continuum natural enemies will have very
little inuence on population regulation. At
the r end of the ravine the numerical
response of the natural enemies is limited;
they are often polyphagous predators, large
relative to their prey, and have equilibrium
points at relatively low densities
(Southwood and Comins, 1976). The short-
age of time in the temporary habitat limits
the numerical response and the r strategists
simply outbreed predation (Horn, 1988). At
the K end of the ravine the saturation point
of the numerical response and the handling
time are higher and the attack rate may be
limited by prey size and other defensive
features of K strategists.
From these differences between r and K
strategists it was possible to draw up a
framework for potential control options to
be used against particular types of pest
(Table 9.4; Southwood, 1977a). Natural ene-
mies will obviously be of most use in the
intermediate position on the rK continuum
and should be the preferred strategy against
such pests, e.g. many forest Lepidoptera
(Horn, 1988). Natural enemy regulation of
insect pests of this type may be enhanced
through the use of conservation and aug-
mentation techniques. Classical introduc-
tions of natural enemies and use of selective
insecticides could also prove effective
against the rK intermediate pests.
The rapid development of outbreaks of r
pests can make them very difcult to con-
trol. Natural enemies can rarely respond
quickly enough to provide a suitable level
of control, but because r pests can rebound
after even very heavy mortalities, insecti-
cides have to be used more or less continu-
ously (Conway, 1984a). Polygenic resistant
Programme Design, Management and Implementation 287
Table 9.4. The principal control measures appropriate for different pest strategies (Conway, 1984a).
Control measure r pests Intermediate pests K pests
Insecticides Early wide-scale Selective Precisely targeted
applications based insecticides applications based on
on forecasting monitoring
Biological control Introduction of
enhancement of
natural enemies
Cultural control Timing, cultivation, Changes in agronomic
sanitation and rotation practice, destruction
of alternative hosts
Resistance General, polygenic Specic, monogenic
resistance resistance
Genetic control Sterile mating technique
Chapter.9 10/7/00 11:31 am Page 287
crops (utilizing horizontal resistance) and
animals can be used to reduce overall rates
of increase and cultural control may be of
help if it serves to reduce the size of immi-
gration, e.g. early or late planting.
K strategists are theoretically suitable
targets for genetic male-sterile control
because they can be forced to low popula-
tion levels where such control techniques
will have a major impact. Insecticides may
also be appropriate where small popula-
tions cause high damage such as fruit
blemishes, but timing of application will
be critical, e.g. codling moth control.
Monogenic host resistances can be used
effectively against K strategists because a
small change in their habitat or niche can
have a major effect on population dynam-
ics. For the same reason cultural control
may be effective, since it reduces the effec-
tive size of the pest niche (Conway, 1981).
The recommendations for changes in
habitat structure as an effective preventa-
tive control measure is one area in which
the analysis of Stenseth (1981) coincides
with that of Southwood (1977b) and
Conway (1976, 1981). In other ways the
analyses produce conicting scenarios and
hence different types of recommendations
for control. The approach used by Stenseth
(1981) was based on the equilibrium theory
of island biogeography (MacArthur and
Wilson, 1967). The basis of the approach
was to aim to have the potential pest
species present for as short a time span as
possible. The environment was assumed to
remain constant, which excluded predators
and parasitoids from the analysis. Stenseth
(1981) came to the following conclusions
about control strategies based on r and K
strategies:
1. If there are methods for reducing immi-
gration into empty patches by almost 100%
then, regardless of the demography of the
pest, most of the resources should be used
on this. The techniques used must be ef-
cient and should be applied with great spa-
tial variability between patches.
2. If no particularly effective methods for
reducing immigration exist then separate
predictions for r and K strategists in the
same environment and habitat complex
should be as follows:
(a) For r strategists resources should be
devoted to inuencing extinction rates
through mortality and birth. A greater
emphasis should be placed on reducing
the birth rate rather than increasing
mortality. The techniques should be
applied with as little variation between
patches as possible, but as variable as
possible over time.
(b) For K strategists, resources should
in most cases be devoted to reducing
dispersal, and techniques should be
applied in space and time as in (1).
Remaining resources should then, in
most cases, be devoted to increasing
mortality.
(c) These recommendations provided
by Stenseths (1981) analysis differ
from those advocated on the basis of
the Southwood and Comins (1976) syn-
optic model. The latters approach
advocates application of insecticides
(affecting mortality) for r-selected
species as well as for some K-selected
species. The analysis of Stenseth
(1981), however, suggests that insecti-
cides may only be appropriate in some
K-selected species. Stenseth (1981)
argues that since most pest species are
r-selected this apparent difference in
strategy for insecticide use may explain
why insecticides have proven so inef-
cient in protecting the worlds food
supply. Thus these differences repre-
sent quite a contentious issue.
The difculty at present is how to resolve
the differences between these two analyses
to the benet of pest management. Stenseth
(1981, 1987) suggests that the differences
are primarily due to different assumptions
made about the patch dynamics and the
need in Stenseths model for effective
instantaneous measures for control.
Stenseth (1981) also assumes that the r and
K pests exist in the same environment and
habitat complex while Southwood (1977a)
stressed the different dynamics of the habi-
tats of r and K species. Any preference for
288 Chapter 9
Chapter.9 10/7/00 11:31 am Page 288
either model and analysis will then be
dependent on how the habitat template
(Southwood, 1977b) is viewed. It is obvi-
ous that there is a need for greater under-
standing of the dynamics of the habitat
template if this dichotomy of opinion is to
be resolved (Stenseth, 1987). Further work
is needed on this subject and the more gen-
eral relation between successful control
options and different pest types. The theo-
retical studies carried out to elucidate
principles will ultimately also require sup-
portive eld data if the subject is really to
make headway. This surely must represent
one of the major study areas in IPM in
future years.
9.3.3 Selection of control measures types
of control
Control measures may be selected because
they either reduce the initial pest numbers
infesting the crop (N
t
) or they are used to
reduce the rate of population increase (r)
after colonization. An IPM programme
involving a number of control measures
would aim to reduce both N
t
and r.
Measures that reduce N
t
include quaran-
tine procedures, eliminating alternative
hosts, crop rotations and vertical resistance
anything that impacts on host nding
and establishment of colonies. Control
measures that reduce r can affect mortality,
reproductive rate, development or genera-
tion times will have an effect on the intrin-
sic rate of natural increase. Antibiotic
resistance can inuence all of these factors
whereas chemical pesticides are normally
used simply to increase mortality of a par-
ticular development stage. Natural enemies
will also affect mortality but chronic infec-
tion by pathogens can slow development
rates or affect reproduction. Insect growth
regulators will act in a similar way while
the sterile insect technique will reduce r
through decreasing mating success and
hence, reproduction. The choice of control
measures should depend on the relative
impact on N
t
and r that is required.
However, more often decisions are made
on a more pragmatic basis depending upon
what measures are available, practical, fea-
sible, economically desirable, environmen-
tally and socially acceptable and politically
advantageous (Norton, 1987; Bomford
1988; Norton and Mumford 1993). Control
measure can be assessed for each of these
characteristics in a feasibility table
(Bonford, 1988; Prinsley, 1987). A control
attribute table can also assist in the
appraisal of control measures to ensure the
most appropriate measures are introduced
(Table 9.5) (Dent, 1995).
9.3.4 Selection of control measures
operational factors
A large number of operational factors will
inuence how a control measure is
deployed, used and its subsequent efcacy.
Control measures may be used in either a
prophylactic or a responsive way, although
most are limited by their nature and attrib-
utes to one or other of these. A control
measure that is used prophylactically is
deployed without any assessment of need
or economic benets. This usually means it
is deployed before a farmer has knowledge
of whether pest populators are present or
likely to reach damaging levels. Examples
include use of resistant cultivar, cultural
control techniques, and calendar spraying
of insecticides. A responsive deployment
of a control measure occurs on the basis of
knowledge or need and likely economic
gain by the farmer (Vandermeer and
Andow, 1986). In practice, deployment of a
control measure in a responsive way
depends upon availability of reliable infor-
mation from a pest monitoring and fore-
casting system. Ideally use of a responsive
measure would be tied to an economic
threshold model, although this is too rarely
the case. Mumford and Norton (1987)
reviewed the conditions that favour use of
prophylactic and responsive control mea-
sures (Table 9.6).
9.3.5 Objectives and strategies
The setting of goals/objectives is an essen-
tial component in the design of an IPM
programme. Goals must dene what it is
that the programme is attempting to
achieve. If the goal(s) are inappropriate
Programme Design, Management and Implementation 289
Chapter.9 10/7/00 11:31 am Page 289
290 Chapter 9
Table 9.6. Relative conditions which favour use of prophylactic and responsive control measures (from
Mumford and Norton, 1987).
Prophylactic Responsive
Regular pest attack (in space and time) Irregular pest attack
Frequent pest attack Infrequent pest attack
Endogenous pests Exogenous pests
Multiple pest complexes Single major pest
High rate pest increase Slow rate of increase
High damage cost Low damage cost
Less effective control More effective control
Long lasting control Short duration control
Few bad secondary control effects Serious bad secondary effects
(pollution, resistance, etc.)
Low control cost High control cost
Limited choice of controls Wide choice of controls
Poor natural control Good natural control
Monitoring technique difcult Monitoring technique easy
High managerial cost Low managerial cost
Poor access to advice Good access to advice
More risk aversion Less risk aversion
Table 9.5. Control attributes table a hypothetical example.
Control measure Chemical insecticide Microbial insecticide
Cost: H, high; M, medium; L, low
Product purchase M M
Application L L
Equipment/machinery H H
Operating/maintenance M M
Time L L
Labour L L
Control characteristics: 1, good; 5, poor
Reliability 2 4
Specicity 3 2
Ease of use 2 2
Efcacy
Speed of action 2 4
Toxicity to target organ 1 2
Compatibility (natural mortality factors) 5 2
Duration of control 3 4
Hazard: H, high; M, medium; L, low
Operator H L
Family H L
Consumer L L
Environment H L
Infrastructure support requirements
Extension services H M
Diagnostic laboratories M M
Credit facilities M M
Chapter.9 10/7/00 11:31 am Page 290
then de facto the programme will fail. A
goal is the benchmark against which the
success of the programme will be judged. A
goal is a generic term combining the aspira-
tions of the programme in terms of its
vision and levels of ambition (Karlf,
1987). Vision refers to the image of the
future that encompasses current knowl-
edge, hopes, aspirations and opportunities
The level of ambition places this in the
context of the ability or will to perform, to
achieve a specied standard. Thus, these
two aspects of vision and level of ambi-
tion combine to provide a goal. Each goal
is linked to the activities necessary to
achieve them. A strategy identies the
means (the activities) by which the goal
will be achieved. Karlf (1987) considered
goals and strategies to be linked in a hierar-
chical way such that the goal of one level
becomes the strategy of the level above it.
Conversely, the strategy at one level
becomes the goal of the level below it. Dent
(1995) used this to provide a descriptive
summary of the goal/strategy relationship,
as a strategic tree (Fig. 9.7). In designing an
IPM programme the role of different orga-
nizations, which may include govern-
ments, research institutes, extension
services, farmers, agrochemical companies,
can be clearly dened using a strategic tree.
9.4 Programme Management
Programme or project management refers to
the techniques used by those individuals
leading R&D teams involved in the devel-
opment of pest control products, tech-
niques or IPM programmes. It is through
the process of management that the efforts
of individuals within and between research
teams are coordinated, directed and moti-
vated towards the achievement of particu-
lar goals. Ineffective management will
reduce the likelihood of a research project
Programme Design, Management and Implementation 291
Goal:
Strategy:
Goal:
Strategy:
Goal:
Strategy:
sustainable production of staple food crops
provide funds for research on crop improvement, crop protection
and for subsidies of pesticides and fertilizers
crop improvement through plant breeding
breeding plants resistant to pests and diseases through
conventional plant-breeding techniques
breeding plants resistant
to insects
germplasm screened for
resistance to pod borer,
shootfly, mechanisms of
resistance evaluated
Promising lines entered
into breeding programme
Goal:
Strategy:
breeding plants resistant
to diseases
germplasm screened for
resistance to rust and wilt,
biotypes identified
Promising lines entered
into breeding programme
Government
Research Institute
Department
Agency Goal and Strategy
Fig. 9.7. A strategic tree for sustainable production of staple food crops.
Chapter.9 10/7/00 11:31 am Page 291
obtaining its objectives. A neglect of
research management has to some extent
been responsible for the slow progress
made in the development of interdiscipli-
nary IPM systems. This is disappointing, as
much because the techniques of manage-
ment are well established and are readily
applicable to research and IPM, as for the
lost opportunities for developing success-
ful IPM programmes. There are many
books on management that are relevant and
should be read by anyone interested in
becoming a research manager (e.g. Gilman,
1992). Dent (1995) specically addresses
issues relating to IPM programme planning
and management. The subject is only given
cursory coverage here dealing with organi-
zational structures and management.
9.4.1 Organizational structures
Structure within an organization is created
by management for the purpose of division
of labour and coordination of activities
towards common objectives. The structure
will be used to dene research tasks and
assign responsibilities as well as to develop
clear channels for the ow of information.
The structure may be formal or informal.
Formal structures tend to be prevalent in
government institutes and commercial
companies the hierarchy is clearly delin-
eated and formally adhered to whereas in
universities less formal structures exist and
the division between levels is less rigidly
enforced. Both have their advantages and
disadvantages as far as coordinating
research is concerned. With more formal
structures clear lines of authority exist and
managers can if they wish actively direct
and control the research that is carried out.
By contrast in universities few researchers
have direct authority over peers and coor-
dination of multidisciplinary teams is
dependent on cooperation and mutual
agreement. Hence, in universities there
may be situations in which it is less easy to
coordinate and direct the research activi-
ties towards specic goals.
The emphasis on research for the last 25
years has been for increasing specialization
and this had seemed particularly necessary
with pest management where detailed spe-
cialized information has been required.
This specialization, combined with a coin-
cidental decline in resources, has caused
research organizations to concentrate on
what they are recognized as doing well,
reducing any opportunity for maintaining a
broad based multidisciplinary approach to
research. Universities with traditional
areas of expertise have increasingly nar-
rowed their research interests so that few
have the necessary range of expertise to
cater for an integrated multidisciplinary
approach to pest management. The result
has been that few organizations now have
the required breadth of expertise to inde-
pendently carry out research of this kind.
Where the expertise has existed the per-
vading doctrine of specialization has meant
projects have been taken on piecemeal, and
little attempt has been made to develop
programmes of interdisciplinary research.
Pest management problems have for far too
long been considered on this very narrow
basis and if the process is to be reversed
attention will need to be paid to structural
organization. The problem is one of creat-
ing suitable organizational structures that
promote integration of pest management
research. One solution has been the
increased emphasis on collaboration
between organizations that have comple-
mentary expertise (Fig. 9.8).
The hierarchical organization depicted
in Fig. 9.8 could also be used in an organi-
zation where all the necessary expertise
existed at the one location. An alternative,
however, would be a matrix organization
which is a combination of functional
research groups that integrate various
activities of different functional groups on
a project team. The functional research
groups provide a stable base for any spe-
cialized activities and a permanent loca-
tion for individual members of the research
group. A project team will be set up, sec-
onding individuals from appropriate func-
tional groups, as a separate unit on a
temporary basis for the purpose of solving
a specic research problem. The matrix
organization forms a two-way ow of
292 Chapter 9
Chapter.9 10/7/00 11:31 am Page 292
authority and responsibility (Fig. 9.9) and
can be very effective if the project team has
a very clear objective and the composition
of the team is carefully chosen (Mullins,
1989). It also provides a exible approach
to problem solving and integration of
expertise, as well as good opportunities for
individual development and initiative.
However, management skills or matrix
structures are highly advanced and
demanding. For this reason alone, they are
probably not appropriate for organizations
such as universities where managers tradi-
tionally have no management training. In
other organizations, use of a matrix struc-
ture should be engaged only with caution
ensuring the good managers hold the key
positions as opposed to leading scientists.
It is too often assumed that a good scientist
makes a good manager, while in practice
this is rarely true (Dent, 1996).
Appropriate organizational structures
are fundamental to good management.
Without them, integration of research will
be less likely to occur and at a different
level it may be found to affect motivation,
innovation, morale and decision making,
and exacerbate conict and poor coordina-
tion. Much more care needs to be given to
devising appropriate organizational struc-
tures for research programmes in pest man-
agement.
9.4.2 Management as an integrating activity
Management is not a separate discrete
function, it combines a variety of activities
that include planning, organizing, direct-
ing, coordinating and motivating.
Planning is an activity that requires the
manager to think ahead, to decide what
needs to be achieved and the order of pri-
orities for action. In applied research it is
not enough to trust to good fortune to bring
you to a point that will provide a satisfac-
tory conclusion to the work. The end objec-
tive needs to be carefully selected and
dened and the means of achieving it fully
outlined.
Of course the plan for the research work
may have to be changed, according to
information gained during the course of the
research programme, but if this is the case
then the plan would have to be revised and
the work developed along these new lines.
Without a denite plan it is very easy for
research to lose direction and while this is
perfectly admissible in pure research it is
less easy to justify in an applied subject
Programme Design, Management and Implementation 293
Fig. 9.8. An organizational scheme for the type of hierarchical relationships that may exist for a research
programme carried out between three collaborating organizations, A, B and C; () formal relationships,
(-------) functional relationships.
Chapter.9 10/7/00 11:31 am Page 293
such as pest management research. There
will always be exceptions to this rule, the
uncovering of a promising new area of
research being one of them, but generally,
unless a manager can plan an effective
research programme, it is unlikely that
suitable goals will be attained.
A number of techniques exist to assist in
this process. The most commonly used
techniques are activity or Gantt charts
(Dent, 1992), logistic frameworks but in
addition implementation plans that dene
the operating procedures, performance
standards, and decision rules for a research
programme have proven of value in multi-
institute multidisciplinary R&D pro-
grammes (Dent, in press). Even with such
aids, providing direction and focus of
teams of scientists will not be an easy task
for a manager. The natural inclination and
training of scientists creates independence
of thought and action and hence differ-
ences in rates of progress and the uncover-
ing of novel ideas, techniques, etc. will all
confound efforts to keep the research task
goal orientated. This task of keeping the
programme on course will be easier in
some circumstances than others. Where
direct lines of control and authority are
permissible the manager has some recourse
to these for use in directing work. In uni-
versities, however, where lecturers working
in a collaborative programme have no for-
mal authority or inuence over one
another, other than that of a title such as
manager, the task of directing the research
will be dependent on the goodwill of indi-
viduals and the leadership skills of the
manager. These skills will need to be
greater with programmes involving a num-
ber of different disciplines where research
from the different sources will need to be
effectively coordinated.
The coordination of research, especially
interdisciplinary research, is made difcult
by differences in perception of problems,
the approach that should be used and the
interpretation of experimental results. The
need for a manager to understand how dif-
ferent people perceive different issues, etc.
has been mentioned above, but the role of
this both for managers and individual
members working in interdisciplinary
research programmes has to be stressed.
Everyone has their own perceptions of
events and will interpret what they experi-
ence in the light of accumulated knowl-
edge and wisdom. Thus, scientists trained
in one discipline may perceive things dif-
ferently from a scientist trained in another,
or an economist or sociologist. In the
realms of interdisciplinary research these
differences in perception can have tragic
consequences for a research programme.
Consider the picture in Fig. 9.10: is it a rab-
bit or a duck, or both? What would happen
if your discipline allowed you to see a
duck while anothers discipline allowed
294 Chapter 9
Fig. 9.9. An example of a matrix organization with a two-way ow of authority and responsibility via the
project manager and the manager of each functional research group.
Chapter.9 10/7/00 11:31 am Page 294
him to see a rabbit and you did not realize
the difference (Dent, 1992)? The chances
are that the others view may be considered
foolish, or, further, misunderstandings
could accrue when each blames the other
for lack of intelligence, deceptiveness or
insincerity (Swanson, 1979). There are a
number of ways of avoiding these prob-
lems. The rst makes it necessary for indi-
viduals to understand and acknowledge
that different disciplines have different
cognitive maps (Petrie, 1976). A cognitive
map is taken to include basic concepts,
modes of enquiry, what counts as a prob-
lem, observational categories, representa-
tion techniques, standards of proof, and
types of explanation, and generate ideals of
what constitutes a discipline (Petrie, 1976).
Once this fact has been acknowledged it is
then necessary for each to learn at least
part of other disciplinary maps. This can
be done by learning about the observa-
tional categories of the other discipline and
by learning the meanings of key terms in
the others discipline (Dent, 1992, 1994).
The aim being to understand enough to
allow one to interpret the problem in the
others terms. It is this aspect of interdisci-
plinary research that has been overlooked
in the past but is absolutely necessary if
the work of the group is to be successful
(Petrie, 1976).
The coordination of research activities
also requires that the form of integration of
research that is to be achieved is dened.
Rossini et al. (1978) considered there to be
four types of integration and four socio-
cognitive frameworks for integration. The
four types of integration were termed edito-
rial, conceptual/terminological, systemic,
and theoretical. The editorial form of inte-
gration involved the organization and
ordering of written material obtained from
different disciplinary scientists. Devices to
integrate the work might include use of
introductions and conclusions. The con-
ceptual/terminological form of integration
took a further step and ensured that a con-
sistent vocabulary and terminology was
used throughout the written material.
These two forms of integration may often
merge in practice, with systemic integra-
tion a common view or representation per-
meating the whole study. This may be
formalized by use of a conceptual or math-
ematical model to help achieve integration.
These are the four types of integration that
could potentially be used in pest manage-
ment research. In practice an emphasis
occurs on the lower order types of integra-
tion although the increased interest in
modelling has focused attention on sys-
temic integration. However, it is usually
considered as an isolated technique and is
not often used as a mechanism for integrat-
ing research programmes.
The four processes that can be used to
achieve integration, the socio-cognitive
frameworks of Rossini et al. (1978), can be
referred to as common group learning,
negotiation among experts, modelling, and
integration by leader. These represent ide-
alized mutually exclusive frameworks
which in practice rarely exist, but they do
provide a structure for comparison.
Components of each will inevitably be
found in existing research programmes.
A common group learning approach
requires the members of a research team to
decide on a denition and boundaries of
the problem as a group exercise. A division
of effort is determined and each team mem-
ber carries out their allotted tasks. The
analyses of each members data are com-
mented on by every other member and
after discussion, reports are written by
Programme Design, Management and Implementation 295
Fig. 9.10. A question of perception: is this a rabbit
or a duck, or both?
Chapter.9 10/7/00 11:31 am Page 295
members who are not specialists in the
area. The nal report is then the common
intellectual property of the group
(Swanson, 1979).
The negotiation-among-experts approach
is similar to that of group learning except
that there is a greater emphasis on the role
of individual experts within their given
discipline. The assignments are allocated
to each expert who then brings the full
power of their appropriate discipline to
bear on the problem. The group then dis-
cusses the result of the work focusing on
the overlaps and links between the differ-
ent components. After these negotiations
the individual team experts rewrite the
report of their work bearing in mind the
results of these negotiations. Non-experts
do not write a common report.
Both the group learning and the negoti-
ation among experts approaches can suffer
from an initial failure to identify the prob-
lem and its boundaries. If this is combined
with poor denition of individual tasks
and assignments then the approach will be
prone to disintegration of effort because
each member will tend to do what they
think is appropriate irrespective of the
partners goals and requirements. This
problem arises because few groups can
generate the conciliatory atmosphere and
the necessary self-discipline to allow indi-
viduals to discuss their research open and
frankly. Negotiation among experts can
even be said to run contrary to standard
research training since it involves the
internal tampering with discipline analy-
sis to include other intellectual perspec-
tives (Rossini et al., 1978); not a practice
scientists will readily accept unless among
close colleagues with whom they share
absolute condence and respect. Such sit-
uations do occur, but it can take several
years before a team can fully interact and
cooperate in this way (Bareld et al., 1987;
Dent, 1992). The common group learning
approach has the advantage that if any
confrontation situation does develop over
a particular issue then the approach places
the burden of confronting the expert upon
the whole.
Modelling, as a socio-cognitive frame-
work, has the advantage in that the use of a
model tends to depersonalize any con-
frontation in favour of forcing individuals
to meet the information demands of the
model. The modelling approach provides a
denite focus for participation, especially
in the early stages of problem denition
and framing. Not all the members of the
team need participate in the model con-
struction but ideally all should agree on its
form and should contribute data. The use
of a model in this way will have the added
advantage of also providing the team with
a shared paradigm. It has the disadvantage
of sometimes providing too narrow a focus
and excluding aspects of the problem that
do not really t within the model frame-
work. For this reason mathematical models
may be of most use for problems that are
well dened and lie within a fairly narrow
range of closely related disciplines.
Conceptual models on the other hand can
have wide ranging application.
The integration by leader may appear an
attractive proposition, but in the situation
dened by Rossini et al. (1978) (also see
Swanson, 1979) the leader functions as the
sole integrator and interacts with each
member and the members do not interact
between themselves. In this situation the
success or failure of the approach is totally
dependent on the skills of the leader. A
poor leader will not be able to integrate the
work of the individual members and even a
good leader would have problems with
understanding, assimilating and making
effective use of the individuals contribu-
tion from all but a relatively small research
team. Hence, the excessive demands
placed on the leader for larger groups will
make this approach impractical.
Each of the four frameworks discussed
above has its strong and weak points, with
approaches being more relevant to some
situations than to others and rarely with
one approach being used exclusively
throughout. Rossini et al. (1978) recom-
mended that strategies for integration
might best include a combination of
approaches. In the past, a research team
296 Chapter 9
Chapter.9 10/7/00 11:31 am Page 296
has only rarely deliberately selected in
advance the intellectual and social compo-
nents that determine the particular socio-
cognitive framework for their collaborative
programme; more often the organization
evolves into a stable pattern by trial and
error (Swanson, 1979). However, a more
positive and decisive approach to selecting
a suitable combination of frameworks may
speed up the coordination of the research,
especially during the important denition
phase.
A scheme such as that depicted in Fig.
9.11 may be considered generally appro-
priate for combining different frameworks
within an R&D programme. Firstly a con-
ceptual model could be produced by a few
members of the programme, e.g. the team
leader, a modeller and a socio-economist.
This should aim to incorporate the main
components of the system. This model
should then be discussed by the group to
eliminate basic differences and misunder-
standings and then each should take the
general model away and consider it care-
fully in the light of their own knowledge
and experience. They should make any
alterations they consider necessary, but
must be able to discuss and justify their
additions and/or omissions to the model
to the other team members. The model is
now openly discussed and everyone
attempts to explain their own components
as well as to understand those of the oth-
ers in the team. Thus the model is eventu-
ally accepted as the common paradigm of
the group. It will have been used to both
dene the problem and its boundaries and
to promote individual and group partici-
pation in its formulation, aiding the
process of integration. During the research
phase the model denes the research and
data requirements and hence can be used
to direct the research effort. In this task,
Programme Design, Management and Implementation 297
Fig 9.11. A scheme for the type of socio-cognitive framework appropriate for each stage of a research
programme. See text for further explanation.
Chapter.9 10/7/00 11:31 am Page 297
and also to promote continued communi-
cation and integration of approach the
team leader will encourage and maintain
links between the different research
groups. The leaders role will here differ
from that of the leader integrator of
Rossini et al. (1978) where all information
passed only through the leader. Here, the
leader will be responsible for maintaining
interactions between all team members, as
well as him/herself.
Periodically it will be necessary and
important that groups meet to discuss
progress towards their mutual and individ-
ual goals. The frequency of such meetings
will be dependent on many things, such as
the location of each of the research groups,
the completion of work according to sea-
sons, etc., but the more often the groups
can meet and the more informally discus-
sions can take place, the greater will be the
integration achieved (Barker, 1994; Clarke,
1994). During these meetings each of the
group experts will make a report of their
work which will be discussed by the
group. The leader will write a report of the
programmes progress, integrating all the
different components. The future direction
of the research will be considered and dis-
cussed in the presence of all the members,
with the leader taking an active part to
encourage and direct the work towards the
common goal. The process will effectively
start again when the model reaches the val-
idation stage, or the research moves to the
eld integration stage. The results of the
validation and the experiments will be
used to reassess the whole programme and
to dene new targets, changes to the
model, etc.
9.4.3 Management training for scientists
There are two basic concerns about our
present ability to produce scientic leaders
capable of managing pest management
research groups. The rst is that the train-
ing received in science does not equip
young people for management and the edu-
cation/qualication system promotes and
rewards only specialist research work
(Dent, 1996).
Scientists need to be trained rst
through a Bachelor of Science Degree and
then either a Masters or a Doctor of
Philosophy or both, after which the post-
doctoral scientist will work on a specic
research problem for a number of years. At
no point during this training period does a
scientist receive any training in manage-
ment, but from the post-doctoral level
onwards, throughout the scientists career,
management will become an increasingly
greater component of the scientists work.
The need for management skills will start
modestly enough, perhaps with the need to
supervise only a technician or post-gradu-
ate student, but as the scientist progresses
to section leader, lecturer, head of depart-
ment, director of the research institute,
etc., the need for management skills will
become overwhelmingly important. It
might be argued that during the progress
up the management ladder the scientist
acquires the necessary skills, or only those
who obtain or have the skills ascend to
higher management positions. That this
were only true, but in reality it is not the
situation. Scientists are largely promoted
on scientic grounds rather than on man-
agement ability (Dent, 1996). This situation
may be acceptable in much of the scientic
community but within the context of pest
management research it takes on a further
incongruity. Pest management research
involves the integration of multidiscipli-
nary teams that can only be achieved with
careful leadership and management; man-
agement for which few in science have
been trained. Now more than ever, there is
a need for research managers in pest man-
agement research, but the only real way
that such people can gain the necessary
scientic and management training will be
with specially taught courses that combine
these two components. Courses that are
run at present do not full this role,
although most of them provide scientists
with the broad based knowledge required
by such managers. This need has long been
recognized (Smith,1978) and even though a
number of courses do assist in developing
the skills of generalist scientist there is still
298 Chapter 9
Chapter.9 10/7/00 11:31 am Page 298
a tendency to regard specialist work as
somehow better than the more generalized
(Thorne, 1986). Such attitudes do little for
the progress of integrating pest manage-
ment research and will hopefully in the
course of time be replaced by a respect and
understanding for the specialists skills,
and the abilities of the generalist insect
pest manager.
9.5 Delivery of Research Results
The outputs of research in pest manage-
ment may be classied as information,
techniques or products (Dent, 1997b).
Products are characterized by having com-
mercial value and that they are usually
purchased as off-farm inputs (Dent, 1993,
1995). They may be available as devices,
materials or substances (which may be liv-
ing organisms, chemicals or plant material)
which is usually manufactured, produced,
formulated or packaged for sale. Products
include a diverse range of control agents
such as biopesticides, chemical insecti-
cides, resistant crop cultivars, macrobiolog-
ical control agents and monitoring and
trapping devices. In contrast to products a
technique is a form of procedure, skill or
method that may be utilized by farmers
from available on-farm resources (Dent,
1993). Techniques are often based on tradi-
tional agronomic or husbandry practices
such as crop rotation, tillage or planting
dates that are specic to at least the level of
the cropping system. Both techniques and
products have information components in
that they require both conceptual and tech-
nical know-how to ensure they are used
properly (Dent, 1997b). Information can be
formatted as decision support systems,
e.g. decision rules based on monitoring and
forecasting and expert systems (Norton and
Mumford, 1993). These decision tools are
used for the analysis and delivery of
research outputs, being concerned with the
design of control recommendations, pro-
viding pest forecasts or delivery specic
information and advice (Norton, 1993) and
include database systems, computer mod-
els particularly simulation models, expert
systems and goal, linear and dynamic pro-
gramming.
The provision of information and
advice, the transfer of technology, educa-
tion and training is traditionally the remit
of the extension service. Extension meth-
ods may target individuals, groups or mass
audiences according to the type of dialogue
required and the number of farmers
involved (Adams, 1982). In addition the
use of farmer eld schools have provided
alternative means of empowering farmers,
incorporating external and indigenous
know-how with a strong dissemination ele-
ment to its message.
9.5.1 Simulation models
In the USA the evolution of computer sim-
ulation models occurred concurrently with
the evolving concept of IPM (Logan, 1989).
This coincidence provided the IPM
researcher with a tool that could help deal
with the complexity of IPM. Simulation
methodology also provides an unequalled
ability for producing realistic models of
systems behaviour for a reasonable invest-
ment of time and money (McKinion, 1989).
These models can also be readily used by
non-mathematicians because they do not
necessarily require a high degree of mathe-
matical sophistication to implement (Getz
and Gutierrez, 1982). The real advantage of
a simulation model is, however, that it per-
mits study of the real system without
actual modication of that system. This
means that a system simulated on the com-
puter can be subjected to a series of alter-
native modications in a controlled and
systematic manner and the consequences
of these modications studied (McKinion,
1989). These attributes and the common
claim that simulation models are a pre-
eminently useful research tool because
they help identify gaps in our knowledge
(Conway, 1984a) has made the technique
highly acceptable as an approach consis-
tent with IPM and IPM needs and objec-
tives.
The technique does, however, have a
number of recognized pitfalls (Getz and
Programme Design, Management and Implementation 299
Chapter.9 10/7/00 11:31 am Page 299
Gutierrez, 1982). A lack of awareness of
certain important processes may lead to
their omission from the model. By their
very nature it may not be readily apparent
what impact such omissions will have on
the model, but eventually such models will
fail. There is also the problem that some-
times the construction of the complete
model becomes an end in itself.
It is not possible to relate here the tech-
niques used in simulation models (see
Rabbinge et al., 1989; Holt and Norton,
1993; Holt and Cheke, 1997) but a brief
description of the principles involved may
provide some understanding of the type of
relations and processes that drive such
models. Simulation models should all start
as a relational diagram (Fig. 9.12).
Relational diagrams are qualitative models
that contain the most important elements
and relationships of the system. They make
use of a special form of notation and con-
vention, developed to depict industrial sys-
tems (Forrester, 1961). An understanding of
this notation (Table 9.7) means that the
relational diagrams and the general func-
tioning of the model can be understood.
The modelling approach using this nota-
tion has gained wide acceptance and is
known as the state variable approach. State
variables are quantities such as number of
species, or number of individuals or bio-
mass and each state variable is associated
with a rate variable. Rate variables charac-
terize the rate of change of a state variable
over a given length of time and they
include such variables as development
rate, mortality rate and reproductive rate.
The value of a state variable will change
over time according to the rate variable
which in turn can inuence the value of
the rate variable. In this way positive or
negative feedback loops are developed. The
form the loop takes will determine whether
a state variable continues to increase,
decrease or reaches a steady state. A posi-
tive feedback loop is characterized by a
positive relation between the rate and state
variable which will lead to the rate enhanc-
ing the state and vice versa so that both
continue to increase, e.g. exponential
growth. In a negative feedback loop the rate
may be either positive or negative but will
decrease as a function of the state variable
(Leffelaar and Ferrari, 1989). Unlike the
positive feedback loop, negative feedback
causes the system to approach some goal.
Such an equilibrium state is stable since
any departure will cause a return to the
equilibrium position. The state variables
and the rate variables can be inuenced by
driving variables which tend to character-
ize the effect of the environment on the
system, e.g. temperature, rainfall, but they
can also be immigration and emigration or
sex ratio. A simulation model is con-
structed using state variables, rate variables
and driving variables (also parameters, see
Table 9.7, Fig. 9.12). These variables are all
related in a model with the use of differ-
ence equations.
Although the use of simulation model-
ling is most often associated with research,
they provide an excellent means of testing
and developing management strategies and
for providing a basis for pest management
advice (Holt and Norton, 1993). The ability
of simulation models to predict means they
can be used to either derive general rules
or in real time operation, and given appro-
priate eld inputs, they can provide short
term tactical advice.
Simulation models have now been pro-
duced for a range of pest species and sys-
tems, e.g. cereal aphids (Carter and
Rabbinge, 1980; Rabbinge et al., 1979),
larch moths (van den Bos and Rabbinge,
1976), planthoppers in rice (Cheng and
Holt, 1990), spider mites in fruit trees
(Rabbinge, 1989), potato leafhopper in
alfalfa (Onstad et al., 1984) and Helicoverpa
amigera in pigeonpea (Holt et al., 1990).
They are used in tactical models to predict
pest outbreaks in tandem with management
models (Cheng and Holt, 1990) or to deter-
mine optimum insecticide spray timing
(Baumgaertner and Zahner, 1984; Cheng et
al., 1990; Holt et al., 1990) while in strate-
gic models they have been used to simulate
plant growth and pest damage (Boote et al.,
1983; Gutierrez et al., 1988a,b; see also
Rabbinge et al., 1989) and strategies for
300 Chapter 9
Chapter.9 10/7/00 11:31 am Page 300
Programme Design, Management and Implementation 301
Fig. 9.12. A relational diagram for the grey larch bud moth (Zieraphera diniaria) (after van den Bos and
Rabbinge, 1976).
Table 9.7. The basic elements of relational diagrams, the symbols of Forrester (1961) notation (Leffelaar and
Ferrari, 1989).
Symbol Meaning
A state variable, or integral of the ow; the nal result of what has happened
Flow direction of an action by which an amount, or state variable is changed.
These ows always begin or end at a state variable, and may connect two state
variables
Flow and direction of information derived from the state of the system.
Dotted arrows always point to rate variables, never to state variables.
The use of information does not affect the information source itself.
Information may be delayed and as such be a part of the process itself
Valve in a ow, indicating calculation of a rate variable takes place; the lines
of incoming information indicate the factors upon which the rate depends
Source and sink of quantities in whose content one is not interested.
This symbol is often omitted
A constant or parameter
Auxiliary or intermediate variable in the ow of material or of information
Sometimes placed next to a ow of information, to indicate whether a loop
involves a positive or negative feedback
+ ,
Chapter.9 10/7/00 11:31 am Page 301
insecticide use (Holt et al., 1992) and bio-
logical control (Hearn et al., 1994).
9.5.2 Expert systems
Expert systems are processes that mimic
the way in which humans diagnose prob-
lems and dispense advice (Mumford and
Norton, 1989, 1993). They are usually com-
puter based although for practical imple-
mentation it is often more appropriate to
transfer the expert system to a paper or
manual format. The steps involved in
developing an expert system include prob-
lem structuring, knowledge acquisition,
knowledge engineering and encoding, veri-
cation, validation and testing (Mumford
and Norton, 1993). The basis of expert sys-
tems is a set of linked logical relationships
of rules with the structure If some condi-
tion(s) then some conclusion(s) else other
conclusion(s) (Holt and Cheke, 1997).
A very simple programme could have
one rule:
If pest population is above threshold
(quality value)
then spray (choice)
else do not spray (choice)
A number of expert systems have been
developed for pest management use (Jones
et al., 1990; Compton et al., 1992; Knight et
al., 1992; Tang et al., 1994).
302 Chapter 9
Case Study: GABY: a computer-based decision support system for
integrated pest management in Dutch apple orchards (van den Ende
et al., 1996)
Historically Dutch fruit growers have controlled pests of apple by broad spec-
trum insecticides applied at regular intervals. However, the occurrence of insec-
ticide resistant insects and problems with the control of apple rust mite, which
led to the introduction of predatory mites as a control option, forced a reconsid-
eration of insecticide use strategies. A computerized advisory system (GABY)
was developed to support decision making of individual fruit growers (de Visser,
1991; Helsen and Blommers, 1992; Mols et al., 1992; van den Ende, 1994a,b)
Table 9.8. Insects considered in GABY.
Apple leaf gall midge (D. mali)
Apple blossom weevil (A. pomorum)
Apple sawy (H. testudinea)
Mussel scale (I. ulmi)
Woolly apple aphid (E. lanigerum)
Rosy apple aphid (D. plantaginea)
Rosy leaf curling aphid (D. devecta)
Green apple aphid (A. pomi)
Apple grass aphid (R. insertum)
Summer fruit tortrix (A. orana)
Leaf-rollers (Tortricidae spp.)
Codling moth (C. pomonella)
Winter moth (O. brumata)
Clouded drab moth (Orthosia spp.)
Green apple capsid (L. pabulinus)
Rose tortrix moth (A. rosana)
Fruit tree red spider mite (P. ulmi)
Apple rust mite (A. schlechtendali)
Phytoseiid mite (T. pyri)
Chapter.9 10/7/00 11:31 am Page 302
9.5.3 Linear programming
Linear programming is a technique that has
long been used by economists as a general
purpose technique for determining the best
allocation of scarce resources. It can be
readily applied to any pest management
problem that needs to optimize the use of
two or more resources provided that cer-
tain conditions are met. The most impor-
tant of these is the need for the objective
function and the constraints to be linear in
the decision variables. The objective func-
tion is the method used for measuring how
good an allocation is, while the decision
variables are the ways in which scarce
resources are allocated. The resource con-
straints are the limitations placed on the
decision variables to reect the resource
scarcity (Rossing, 1989). The requirement
for linearity means that a change of one
unit in the decision variables results in a
constant change of the objective function
and the resource constraints.
Linear programming (LP) problems are
solved using an algorithm. A graphical
analysis of an LP problem is used here to
illustrate the technique but such graphical
analyses are not really practical because
they can only be used where there are only
two decision variables. It does, however,
provide an introduction to the structure of
the algebraic methods used to solve and
analyse a general LP problem (Markland
and Sweigart, 1987). Further details on lin-
ear programming can be found in Gass
(1975) or Walsh (1985).
Programme Design, Management and Implementation 303
which would provide a holistic integration of control tactics for almost a com-
plete set of apple pests in a region (Table 9.8). Separate decision models for each
pest or pest group form the core of GABY. The system requires that the farmers
carry out monitoring and record treatments in order to regularly update GABY.
In this way with a series of inputs (orchard characteristics, temperature and pest
numbers) GABY generates recommendations appropriate for a particular pest.
Recommendations to spray insecticides are in accordance with Dutch IFP guide-
lines and are only generated if control thresholds are exceeded. The type and
dosage of the most appropriate insecticide is recommended, and in turn the type,
dosage and date of treatment is entered into GABY since this will affect future
recommendations.
GABY was developed as a stand-alone system. Its value is dependent on the
input of properly collected data which requires initial on-farm support (van den
Ende, 1994a). In addition GABY needs to be regularly updated if it is to continue
to be relevant to farmers needs, for instance any disappearance of insecticides
will change the decision schemes. Hence, although of great value to farmers, the
maintenance requirements by scientists and advisory experts are high.
Case Study: A hypothetical linear programming problem
Suppose that a farmer normally has to apply seven applications of insecticide to
a particular crop each season to ensure control of an insect pest. The farmer has
to purchase all of the insecticide that will be needed at one time as part of a
credit deal. There is the choice of two insecticides for the job, one of these is 0.6
of the price of the other but is unpleasant to apply and is more harmful to bene-
cial insects. Hence, the farmer prefers to keep the use of this insecticide as low as
economically possible, refusing to apply it more than three times during a sea-
son. If the two insecticides have equal efcacy and the farmer wants to optimize
purchase, then the question of how many applications should be made with each
insecticide (and hence how much of each insecticide should be purchased)
needs to be answered.
Chapter.9 10/7/00 11:31 am Page 303
304 Chapter 9
The constraints are:
1. The farmer does not want to apply the insecticides more than seven times.
2. The farmer does not want to apply the cheaper insecticide (X
1
).
3. The farmer cannot afford more than ve applications with the expensive
insecticide (X
2
).
Hence:
1. X
1
+ X
2
< 7
2. X
1
< 3
3. X
2
< 5
4. X
1
> 0
5. X
2
> 2
Let the objective function be:
Z = 2X
1
+ 3X
2
(9.1)
The graphical method for analysing this problem is shown in Fig. 9.13. The rst
step is to draw in the constraint lines equations 1, 2, and 3 which then demarcate
the area known as the feasible region. This is the area in which the optimal
solution to the problem can be found. There are an innite number of feasible
solutions and so a systematic procedure for determining the best feasible solu-
tion is required.
The rst step is to select an arbitrary prot level and to determine all feasible
solutions that yield the selected prot or objective value, for instance a value of
Z = 6.
So X
1
and X
2
must satisfy the linear relationship:
2X
1
+ 3X
2
= 6 (9.2)
The question are there any objective values greater than 6? then needs to be
answered. It is instructive to rewrite the objective function:
Z = 2X
1
+ 3X
2
(9.1)
as: 3X
2
= 2X
1
+ Z (9.3)
then: X
2
= X
1
+ Z (9.4)
The coefcient of X is the slope of the line and and () Z is the intercept (i.e.
2). The slope is independent of the value given for Z, thus for any specied value
of Z the prot line has a slope of . For example, for Z = 6:
X
2
= X
1
+ 2 (9.5)
where X is the slope and 2 the intercept.
As the value of Z is increased the prot line moves further from the origin,
although remaining parallel with each other. If the prot line is moved out from
the origin it will eventually leave the feasible region. The point in the feasible
region that lies on the prot line, with the largest value of Z, is the optimal solu-
tion for the linear programme (Fig. 9.13). Note that the optimal solution lies on
the constraint lines. Determining the exact values from the graph is not advisable
(Markland and Sweigart, 1987). To nd these coordinates it is best to solve the
constraint equations simultaneously:
6. X
1
+ X
2
= 7
7. X
2
= 5
Chapter.9 10/7/00 11:31 am Page 304
9.5.4 Goal programming
Goal programming is similar to linear pro-
gramming except that it permits the inclu-
sion of a number of conicting objectives
and provides a solution to the problem on
the basis of specied goal priorities.
Where the linear programming method
aims to provide an optimal solution the
goal programming technique attempts to
reach a satisfactory level of achievement
given several different objectives
(Markland and Sweigart, 1987). In this
way goal programming perhaps better
reects the way actual decisions may be
made, since few decisions are made with
only a single objective in mind. In goal
programming the decision maker can pri-
ority rank the goals, which are incorpo-
rated into the model as constraints. The
technique is applicable to pest manage-
ment problems and particularly to
research management where choices
between a number of conicting options
may need to be made, e.g. selection of an
area for eld evaluation trials on the basis
of such variables as farm size, area grown
to specic crops, farmer income, contribu-
tion of livestock etc.
Programme Design, Management and Implementation 305
8. X
1
+ 5 = 7
9. X
1
= 2
Hence, the farmer would optimize his purchase of insecticides by buying ve
applications of X
2
and two applications worth of insecticide X
1
.
The graphical method can only be used where there are only two decision vari-
ables then the simplex algorithm is used. Despite its name the method is too com-
plex to be considered here, Gass (1975) or Walsh (1985) provide useful reviews.
Fig. 9.13. A graphical illustration of a linear programming problem. The two decision variables
are the amounts of an inexpensive insecticide (X
1
) and of an expensive insecticide (X
2
). Further
explanation in the text.
Chapter.9 10/7/00 11:31 am Page 305
306 Chapter 9
Case Study: A hypothetical goal programming problem
Suppose a farmer has two fodder crops (X
1
and X
2
) and a total of 10 ha of land
available on which to grow them. Crop X
1
can be used as a cash crop whereas
X
2
is needed to maintain his own cattle stock; a minimum of 4 ha is required
for this. The labour requirement for the cash crop is high so the farmer cannot
afford to grow more than 5 ha of this crop. The nancial return from the two
crops is different, 1 ha of X
1
gives two and a half times the return of crop X
2
and the farmer wishes to return a prot at least equal to 30. There is one fur-
ther constraint: very occasionally there is a pest that attacks crop X
1
and can
cause complete devastation. Since pest control options are too expensive, it
only pays to grow about 2 ha of this crop.
The priority order of goals of the farmer are:
1. Maximal use of 10 ha of land.
2. Must grow a minimum of 4 ha of crop X
2
.
3. Cannot afford to grow more than 5 ha of X
1
.
4. Return must at least equal 30.
5. During outbreak years it is only economical to grow 2 ha of X
1
.
This two-dimensional goal programming problem can be solved graphically by
repeatedly solving the optimization problem, each time adding an extra goal
(Fig. 9.14). The solution space remains unchanged, or if new goals turn out to
be constraints, is decreased. Eventually a goal may be added that cannot be
met by any of the solutions satisfying the higher priority goals (Fig. 9.14). The
solution feasible with respect to the higher priority objectives which deviates
least from the unsatised goal is designated the optimum solution to the
problem.
The fth goal cannot be achieved at any of the points in the solution space,
hence a solution has to be found that minimizes the deviation from this fth
constraint and is still feasible. The dotted line moved towards the solution
space rst comes into contact with point P and this is the rst solution
encountered which is feasible with respect to the rst four goals. Thus, the
optimum solution point P is to grow 3.5 ha of crop X
1
and 6.5 ha of crop X
2
. In
outbreak years the farmer will have minimized the losses due to pest outbreak
with respect to optimizing in non-outbreak years.
Chapter.9 10/7/00 11:31 am Page 306
Programme Design, Management and Implementation 307
Fig. 9.14. A hypothetical example of a simple goal programming problem. The hatched area is
the solution space. See text for explanation.
9.5.5 Decision trees
Where a number of sequential decisions
need to be made in pest management then
decision trees can be useful: for instance,
where a number of options for control exist
that can be applied at different times of the
year (see Fig. 9.4). The decision tree pre-
sents the decisions and their outcomes in
sequence that is followed by the decision-
making process. If a probability and a value
on an outcome can be determined then a
decision tree can be used to study the
effects of different strategies. The sensitiv-
ity of choices to changes in probabilities or
assumptions concerning control effective-
ness can be assessed so that the most
robust strategies can be selected (Mumford
and Norton, 1984).
Decision trees should be constructed
using a set of decision nodes (; at which
one of several alternatives may be chosen)
and state of nature nodes (; at which a
chance event occurs) (Fig. 9.15). The prob-
abilities assigned to the state of nature
nodes are based on historical records and
reect the frequency of occurrence of states
of nature (Mumford and Norton, 1984).
Chapter.9 10/7/00 11:31 am Page 307
308 Chapter 9
Case Study: A hypothetical decision tree analysis
The market for a particular crop is increasing and hence a number of farmers
who have not normally produced the crop are now turning to it as an alternative
source of income. Farms that grow the crop have suffered losses due to a high
incidence of an insect pest which can be controlled by insecticides. One of the
farmers adopting the new crop needs to obtain use of spraying equipment suit-
able for applying insecticides against the insect pest. The farmer believes that the
equipment will be used often, but since there is some doubt as to the likely inci-
dence of an outbreak on his particular farm he does not know whether to hire or
purchase the equipment. The farmer can choose to consult an independent advi-
sor but this will cost 850. What decision should the farmer take?
To carry out a decision tree analysis a great deal of information is required.
Firstly, a set of conditional probabilities must be determined based on the
demand for the spraying equipment by other farmers (who had or had not taken
the advice of the independent consultant) (Table 9.9). Secondly, a set of prior
probabilities is required that identies the actual demand for the sprayer by
farmers who did not pay for independent advice (Fig. 9.15). These prior and con-
ditional probabilities are then used to determine a set of posterior probabilities
which are used in the sequential decision tree analysis.
At the chance node A the overall probabilities associated with the advice
S
e
e
k
a
d
v
i
c
e
0
.
6
4
A
d
v
i
c
e
f
a
v
o
u
r
a
b
l
e
0
.
3
6
A
d
v
i
c
e
u
n
f
a
v
o
u
r
a
b
l
e
D
o
n
o
t
s
e
e
k
a
d
v
i
c
e
1
P
u
rc
h
a
s
e
18,905
A
4
3
2
B
C
D
E
F
G
H
ire
P
u
rc
h
a
s
e
H
ire
P
u
rc
h
a
s
e
H
ire
High
Medium
Low
High
Medium
Low
High
Medium
Low
High
Medium
Low
High
Medium
Low
High
Medium
Low
Probabilities
0.625
0.281
0.094
0.625
0.281
0.094
0.277
0.333
0.388
0.277
0.333
0.388
0.5
0.3
0.2
0.5
0.3
0.2
29,150
13,650
1,250
22,150
11,550
3,150
29,150
13,650
1,250
22,150
11,550
3,150
30,000
14,500
2,100
23,000
12,400
4,000
22,170
22,170
17,384
13,104
11,203
13,104
19,770
19,770
16,020
Fig. 9.15. A hypothetical decision tree analysis where a farmer has to decide whether or not to: (i) purchase
or hire a piece of equipment and (ii) seek advice on this from a consultant, given a high, medium or low
probability of insect pest attack. = decision nodes, = state of nature nodes. See text for further
explanation.
Chapter.9 10/7/00 11:31 am Page 308
Programme Design, Management and Implementation 309
being either favourable or unfavourable are computed. These probabilities are
computed using the prior probabilities (0.5, 0.3, 0.2) and the conditional proba-
bilities (Table 9.9), i.e. where the advice was favourable:
P
F
= (0.8)(0.5) + (0.6)(0.3) + (0.3)(0.2) (9.6)
P
F
= P(F|H).P(H) + P(F|M).P(M) + P(F|L).P(L)
P
F
= 0.4 + 0.18 + 0.06
P
F
= 0.64
The probability of 0.36 (0.1 + 0.12 + 0.14) was similarly obtained for the situa-
tion in which the advise was unfavourable. The next step in the analysis is to
consider the probabilities associated with the chance nodes the conditional
probabilities. These are computed using Bayes theorem, the general form being:
where:
Ai = set of n mutually exclusive and exhaustive events
B = a known end effect, or outcome of an experiment
P(Ai) = the prior probability for event i
P(B|Ai) = the conditional probability of end effect B given the occurrence of Ai.
The posterior probability is thus a revision of the prior probability using new or
additional information. At each chance node the posterior probability P(Ai|B) is
the probability of the event high, medium or low demand given the outcome of
either favourable or unfavourable advice (new information). At each chance node
(BE) the probability of high, moderate or low demand given that the advice was
favourable would be obtained by:
The probabilities for all other conditions (F|M), (F|U), (U|H), (U|M) and (U|L)
were calculated similarly replacing P
F
with P
U
as appropriate. Using these condi-
tional probabilities the expected monetary value (MEV) at each chance node can
be determined by:
P
P P
P
P
F|H
F|H H
F|H
F
( )
=
( )
( )
( )
= =
( . )
.
.
.
9 8
0 4
0 64
0 625
P
P P
P P
i
n
Ai B
Ai B Ai
Ai B|Ai
( )
=
( )
( )
( )
( )
=
1
9 7 ( . )
Table 9.9. The conditional probabilities of sprayer demand when the advice from the consultant
was either favourable or unfavourable.
Actual situation
High Moderate Low
Advice demand (H) demand (M) demand (L)
Favourable (F) P(F|H) 0.8 P(F|M) 0.6 P(F|L) 0.3
Unfavourable (U) P(U|H) 0.2 P(U|M) 0.4 P(U|L) 0.7
Chapter.9 10/7/00 11:31 am Page 309
9.5.6 Dynamic programming
Dynamic programming (Bellman, 1957)
developed from studying a sequence of
decision problems that arose in inventory
control theory (Markland and Sweigart,
1987). It is a technique similar to decision
tree analysis in that it involves breaking
problems down into stages and the decision
at one stage can affect the decision and out-
come at the next stage, but it is a complex
technique that requires quite extensive
modelling expertise. There are no standard
dynamic programming procedures and the
major challenge with the technique in rela-
tion to pest management is to develop a
mathematical model of low dimension
which can adequately describe the impact
of weather and management decisions on
the dynamics of an agricultural system
(Shoemaker, 1982). The models may be
dynamic, non-linear and stochastic but
essentially the computation begins at the
nal stage of the decision process and then
works backwards along an optimal pathway
to the beginning (Conway, 1984b). This
means that all combinations of route do not
have to be checked which makes the tech-
nique quite efcient. Another advantage of
the technique is that if for any reason the
optimal path is not followed between two
decision periods, a new optimal path is pro-
vided. The dynamic programming tech-
nique does have a major disadvantage in
that it is unable to deal with more than four
state variables. This tends to limit its useful-
ness and partly accounts for the difculties
involved at the model formulation stage.
The dynamic programming solution
approach involves four major steps
(Markland and Sweigart, 1987):
1. The problem is divided into subprob-
lems called stages.
2. The nal stage of the problem is
analysed and solved for all possible condi-
tions or states.
3. Each preceding stage is solved working
backwards from the nal stage of the prob-
lem. This involves making an optimal pol-
icy decision for the intermediate stages of
the problem with each intermediate stage
being linked to its preceding stage by a
recursion relationship. It should be
stressed that the exact form of the recur-
sion relationship will vary according to the
dynamic programming problem but it will
always take the general form:
fn*(Sn) = max/min{fn(Sn,Xn)} (9.9)
where the function fn(Sn,Xn) is the value
associated with the best overall policy for
the remaining stages of the problem, given
that the system is in a state (Sn) with n
310 Chapter 9
EMV
B
= (0.625) (29,150) + (0.281) (13,650) + (0.094) (1250)
= 13,843 + 3245 + 296
= 22,170
EMV
C
= (0.625) (22,150) + (0.281) (11,550) + (0.094)(3150)
= 13,843 + 3245 + 296
= 17,384
etc. for each chance node.
From the expected monetary values shown at chance nodes B and C the
largest EMV 22,170 is selected for the decision node 2 and 13,104 for decision
node 3. Using the EMVs at decision nodes 2 and 3 the EMV at chance node A
can be computed:
EMV
A
= (0.64) (22,170) + (0.36) (13,104)
= 14,188 + 4717
= 18,905
From the results of this decision tree analysis it can be concluded that the best
strategy for the farmer would be to not seek any advice from the independent
consultant but to purchase the spray equipment.
Chapter.9 10/7/00 11:31 am Page 310
Programme Design, Management and Implementation 311
Fig. 9.16. An example of the dynamic programming approach using a shortest route problem.
The node number is the number in the circle and the distances between nodes are the numbers
adjacent to each line. See text and Tables 9.10, 9.11 and 9.12 for explanation.
Table 9.10. The stage 1 table for a shortest route, dynamic programming problem. See text and
Fig. 9.16 for explanation.
Minimum
Node number Route Total distance distance (route)
4 47 10 10 (47)
457 22
4567 32
5 57 14 14 (57)
547 18
567 24
6 67 19 19 (67)
657 19 19 (657)
6547 23
stages to go and the decision variable (Xn)
is selected. This recursion relationship
involves a return at each stage of the prob-
lem. The return at a particular stage is due
to the policy decision selected and its inter-
action with the state of the system.
4. The initial stage of the problem is
solved, and when it has been achieved the
optimal solution is obtained (Markland and
Sweigart, 1987).
Dynamic programming has largely been
used in pest management as a means of
optimizing pesticide use (Valentine et al.,
1976; Shoemaker, 1979, 1982, 1984; Dudley
et al., 1989).
Case Study: An illustration of a dynamic programming approach using
a hypothetical shortest route problem
Figure 9.16 is a diagrammatic representation of the shortest route problem. The
solution to the problem will be the shortest route between 1 and 7. The problem
is broken down into three stages (Tables 9.10, 9.11 and 9.12). The stage 3 table
Chapter.9 10/7/00 11:31 am Page 311
9.6 Implementation and Adoption
The development of an implementation
strategy should not be left to the nal
phases of a research programme. It should
initially be considered during problem for-
mulation and then continually readdressed
throughout the research phase of the pro-
gramme. Since it is often at the point of
implementation that many pest manage-
ment programmes fail (Reichelderfer et al.,
1984; Heong, 1985) it is important that the
processes involved in implementation and
adoption be considered in further detail.
9.6.1 Conditions for change
A farmer who is satised with a control
measure or a pest management strategy is
312 Chapter 9
Table 9.11. The stage 2 table for a shortest route, dynamic programming problem. See text and
Fig. 9.16 for explanation.
Minimum
Node number Route Total distance distance (route)
2 24 17 17 (24)
254 18
234 19
2 25 10 10 (25)
235 13
245 25
2 236 16
256 15 15 (256)
2356 18
2456 30
3 34 15 15 (34)
324 21
354 17
3 35 9 9 (35)
345 23
365 17
3245 29
36 12 12 (36)
356 14
3456 18
Table 9.12. The stage 3 table for a shortest route, dynamic programming problem. See text and
Fig. 9.16 for explanation.
Node number Route Total distance Minimum distance (route)
1 12 7 7 (12)
132 16
1 13 12
123 11 11 (123)
(Table 9.12) indicates that when starting at node 1 the minimum distance is tra-
versed by going to node 2. In the stage 2 table (Table 9.11), looking at node 2 the
shorter route will be via node 5 and in the stage 1 table (Table 9.10) at node 5 the
minimum distance to node 7 is 14. Hence, the shortest route from node 1 to node
7 is achieved by passing from node 1 to 2 to 5 to 7 (7 + 10 + 14 = 31).
Chapter.9 10/7/00 11:31 am Page 312
unlikely to be receptive to change (Norton,
1982a) unless there is some alteration in
circumstances that makes a current practice
less attractive. Conditions that are neces-
sary to make a farmer reconsider the value
on a current pest management strategy are
depicted in Fig. 9.17 (Norton, 1982b). These
trigger events refer to two basic categories
of change: big-bang implementation, and
incremental implementation. There is a
third form of implementation, off-farm
implementation, where a change of strategy
occurs because outside agencies undertake
decision making and implementation on
behalf of the farmer. This sort of off-farm
implementation occurs in plantation crops
or when eld crops covering large areas can
be treated economically as a homogeneous
unit by a parastatal body, e.g. cotton in
Sudan Gezira (Eveleens, 1983).
Big-bang implementation occurs when a
trigger event produces an unsatisfactory out-
come as a result of an increase in potential
yield loss, increased pest attack, the avail-
ability of a revolutionary new technology, or
the failure of existing control measures (par-
ticularly as a result of insecticide resistance
and the development of secondary pests)
(Norton, 1982a). It has been argued that the
adoption of pest management strategies
appears only to be associated with the fail-
ure of insecticide use (May, 1978; Brader,
1979; Gutierrez, 1995; van Lenteren, 1995).
In contrast, incremental implementation
occurs as a gradual shift from one control
strategy to another, usually through the
intense activity of extension workers to pro-
mote the adoption of the new technology.
The ow of information is of crucial impor-
tance in this type of implementation.
Programme Design, Management and Implementation 313
Fig 9.17. Major factors that inuence changes in pest control strategies (after Norton, 1982a).
Chapter.9 10/7/00 11:31 am Page 313
9.6.2 Reasons for failure to adopt new
technologies
Even when a new technology is both
appropriate and feasible there will still be
occasions when a particular pest manage-
ment strategy will fail to be adopted by
farmers. The reasons for this may be
caused by a communication gap, social or
cultural constraints, or it could be that
some form of incentive is required.
A communication gap may occur when
information about the new technology is
not being relayed to the farmer because of
lack of resources, extension workers or use
of inappropriate communication channels.
Most small farmers in developing countries
get their information from neighbours,
friends and relatives and often these
sources are more important than the exten-
sion service (Kenmore et al., 1985). Hence,
emphasis solely on extension through
these agencies may not produce a desired
result. A range of information delivery sys-
tems may have to be considered, from pam-
phlets and media articles on the radio and
television, to the use of computer based
systems. Improvements in understanding
the actual communication networks used
by farmers may alleviate problems caused
by communication gaps.
Of course if the farmer is receiving the
information but is not convinced by the
content, its meaning or relevance, then a
reception gap has developed between the
researchers and their target farmers
(Norton, 1990). This may occur as a result
of too little farmer participation during the
research phase of the programme. Such
participation is important and can have a
marked effect on the uptake of pest man-
agement strategies (Saud et al., 1985).
Farmers understanding of what is
involved and required to encourage adop-
tion and their contributions towards coor-
dination of effort among themselves should
never be underestimated. Successful
implementation and adoption of a new
technology will both be assured but will
certainly be improved given greater levels
of farmer participation in the implementa-
tion process. Such involvement may also
prove useful where there are difculties
with adoption due to lack of education
among farmers. If farmers lack sufcient
education concerning the effects of pests
on crop production then they are unlikely
to adopt an approach they do not under-
stand (Reichelderfer et al., 1984). If there
are also too few extension workers to aid
farmers in using a new or complex practice
then widespread adoption will not take
place unless farmers are intimately
involved with the process and can pass on
relevant information.
9.6.3 Extension services
In general, extension includes: (i) the trans-
fer of technology; (ii) provision of informa-
tion and advice; (iii) problem solving; (iv)
education and training; (v) strengthening
the organization base of farmers; and (vi)
supplying inputs, credit and technical ser-
vices (Garforth, 1993). The establishment
and maintenance of an extension service
that provides all of these services is a
costly exercise, prohibitively so in devel-
oping countries especially because little
foreign aid is allocated for this purpose
(Goodell, 1984). Resource availability for
implementing IPM systems has also been
cited as an obstacle to IPM adoption
(Wearing, 1988; Dent, 1995) and will cer-
tainly have an impact on the extension
methods that can be used. Methods may be
classied on the basis of scale, from indi-
vidual to group to mass methods.
Individual, one-to-one farmer-extension
discussions, are without doubt highly val-
ued by farmers (Wardlow, 1992); however,
such methods are on the decline mainly
due to the need to improve levels of cost
effectiveness (Wearing, 1988; Allen and
Rajotte, 1990; Dent, 1995). Individual one-
to-one extension may be feasible where
there are a few large farms in an area hav-
ing similar requirements (e.g. Percy-Smith
and Philpsen, 1992) but most services con-
centrate on providing extension at group
levels or to mass audiences.
Group methods involve extensive work-
ers in addressing a number of farmers at
one time at specied dates, study tours and
314 Chapter 9
Chapter.9 10/7/00 11:31 am Page 314
method demonstration or informal discus-
sions with no xed agenda (Garforth,
1993). Group methods rarely allow in-
depth analysis of specic problems but
demonstrations and study tours allow
farmers to see new technologies with their
own eyes or to carry out new techniques
for themselves, often under supervision.
Mass methods of dissemination seek to
reach very large numbers of farmers raising
awareness of general issues and to shape
attitudes and inuence approaches used.
Mass methods include radio and televi-
sion, lm, video, audio cassettes, drama,
newspapers and other print material
(Stone, 1992; Huus-Brown, 1992). More
recently use of the internet and computer
software have become available (Teng,
1990). Allen and Rajotte (1990) predict that
traditional methods of extension are likely
to decline in importance in relation to
computers and mass electronic media.
9.6.4 Farmers Field Schools
Education and technical complexity of IPM
are thought to have contributed to the slow
rates of adoption of IPM (Wearing, 1988;
Dent, 1995). The complex nature of IPM
necessitates a certain degree of knowledge
and some understanding of the basic con-
cepts of biology and ecology. A farmer may
recognize a spider or a ladybird but may
not have the accompanying concept of
predator or benecial insect to enable
him/her to make sense of any advice on
how not to kill them (Garforth, 1993). The
Farmer Field School approach has been
based on the premise that by assisting
farmers to know and understand their crop
ecosystem they are better placed to make
rational decisions about pest management.
The approach places farmers at the centre
of the IPM process empowering them as
the key pest management decision maker,
independent of constant extension advice
(Chambers et al., 1989; Conway and
Barbier, 1990; Matteson et al., 1994).
The Field Schools work by bringing
together farmers who utilize their existing
knowledge complemented by a trainer in
an agroecosystem analysis which involves
the trainees working in small groups and
observing the state of a crop. The plant is
the central focus and drawings are used to
analyse plant change, pests, natural ene-
mies and environmental changes (e.g.
water levels) (Matteson et al., 1994). Group
members then go through a set of prepared
questions which cover agronomic and pest
problems, on the basis of which manage-
ment decisions are made thus integrating
their skills and knowledge. In addition, in
the agroecosystem analysis there are activi-
ties that address plant physiology, insects,
rats, population dynamics, economics and
issues concerning pesticides. Insect life
cycles are studied by rearing insects in
what are referred to as Insect Zoos.
The IPM Farmers Field Schools
approach has the ability to empower farm-
ers understanding the ecology of their
own elds means they are less susceptible
to exploitation by representatives of agro-
chemical companies. As one graduate of an
Indonesian IPM farmers eld school put it,
After following the eld school I have
peace of mind. Because I know how to
investigate, I am not panicked anymore
into using pesticides so soon as I discover
some (pest damage) symptoms (van de
Fliert, 1992; Matteson et al., 1994). The
philosophy guiding the successfully held
schools in Indonesia is that farmers are
very capable of training other farmers in a
season-long process (Escalada and Heong,
1993). Farmers graduating from the Field
Schools receive certicates which allow
them to train other farmers; thus the
process is disseminated.
9.7 Discussion
There is no detailed formula for the devel-
opment of an IPM programme that can be
applied to every situation. This is as much
because of the variety of possible starting
points for a programme as for the diverse
range of pests/cropping systems that exist.
All that can really be considered here is an
idealized scheme identifying procedures
that should be generally applicable. It will
Programme Design, Management and Implementation 315
Chapter.9 10/7/00 11:31 am Page 315
always be the responsibility of the pro-
gramme manager and the research team to
identify the best and most appropriate pro-
cedures to suit their particular circum-
stances.
The problem denition stage of a pest
management programme involves bringing
together all available information relevant
to the problem. This will involve literature
searches and synthesis of information from
their sources, and it will also involve the
use of workshops, bringing together the rel-
evant extension workers and researchers to
discuss the problem (Norton, 1987) as well
as carrying out a socio-economic evalua-
tion. This combination of studies and dis-
cussions should provide all the necessary
background information, provided suf-
cient is known about pest ecology and yield
losses. If insufcient is known about these
things then there will need to be a prelimi-
nary phase of the work dedicated to obtain-
ing the necessary information. In some well
studied systems such as cotton or maize a
great deal of information may already be
available and this will shorten the time
needed for the problem denition phase of
a programme.
The problem denition stage is vitally
important to the likely success of the whole
programme. The information obtained from
the different sources needs to be carefully
analysed so that it forms the basis of selec-
tion between control options and provides
a framework for research and incorporation
of new information (Heong, 1985). The
major components of the system need to be
identied and key processes described.
From this it should be possible to formulate
key questions that relate to the ecological,
socio-economic and technical information
required for the management of pests. At
this point it should be possible to produce a
conceptual model of the system and the
problem to be dealt with (Fig. 9.18).
Decisions will need to be made as to
whether management will be best achieved
by modication of existing options or
whether development and testing of innova-
tive technologies is required. The time and
research commitments needed will be
greater for the latter. Close attention will also
need to be paid to proposals for how the
management programme is to be imple-
mented. The role of farmers in the pro-
gramme and the importance of identifying
appropriate channels of communication
need to be addressed. Since the implementa-
tion procedures provide the ultimate goal of
the programme it is essential that these are
clearly dened and act as a focus and com-
mon objective for the research.
The needs of the research/experimental
phase of the programme will be determined
by the key questions that have been identi-
ed and the type of control options selected.
Obviously the choice of control options is
going to affect the type of specialist input
required for the research. Ideally a number
of key specialists would contribute to almost
every pest management programme; these
would include a socio-economist, a mod-
eller, an agronomist and specialists in cul-
tural control, natural enemies, host
resistance and insecticides. Additional
expertise may be required in the form of an
ecologist and statistician and specialists in
semiochemicals, genetic manipulation and
quarantine. All of the above may form a per-
manent team for the duration of the pro-
gramme or provide advice at appropriate
times as work progresses. For instance, the
input of the socio-economist may be needed
most at the denition and implementation
stages of a programme whereas a statistician
will largely only be needed during the
research/experimental phase. Each specialist
will have their own projects which should
be directed to achieve goals required for the
success of the programme. The research will
undoubtedly develop at different rates but as
techniques and products become available
their eld compatibility will need to be
assessed. Both quantitative models and
experimental procedures can be used for
these evaluations. Where integrative experi-
mental trials are required then a specialist
group of researchers may need to be brought
together. A statistician and an economist
will play important roles here. When on-
farm trials are carried out an agronomist may
need to be added to the group.
316 Chapter 9
Chapter.9 10/7/00 11:31 am Page 316
If the formulation phase of an insect pest
management programme has been properly
conducted then the implementation phase
should be a well coordinated and organized
formality. The necessary techniques, materi-
als and communication channels to be used
will all have been identied in advance, the
involvement of the farmers throughout the
programme ensuring that the management
programme is appropriate. Sadly this is
rarely the case but, even if it were, it is
unlikely that there will be no problems with
the recommendations and implementation
phases of a programme. Where difculties
arise then time should be spent to formulate
the problem properly and identify the key
questions and then the cycle should con-
tinue as before.
Programme Design, Management and Implementation 317
Fig 9.18. A procedure for the organization of an
insect pest management research programme (after
Heong, 1985).
Chapter.9 10/7/00 11:31 am Page 317
10.1 Introduction
The direction taken by pest management
over the last 50 years has been inuenced
by a variety of factors, including the avail-
ability of pest control technologies, priori-
ties of governments to provide adequate
food supplies, the growth of agribusiness
and the value placed on scientic endeav-
our. These factors and their impact have
been tempered by increasing public con-
cern for food safety, fads championed by
various interest groups (scientists, politi-
cians, funding agencies) and the global real-
ization of the need to use resources more
sustainably. This combination of driving
forces has shaped IPM, the type of strate-
gies that are currently used and they also
form the foundation for pest management
in the future. This nal chapter considers
the current status of pest management from
a number of different perspectives, rstly
by describing three crop/pest management
systems and a few of the lessons that can be
learned from these. This is followed by an
analysis of the inuence of the panacea
mentality on the progress of pest manage-
ment, its inuence in the future and of the
impact of paradigms. The future of pest
control technologies, systems approaches,
the IT revolution and the role of the general
public are then addressed in an attempt to
place IPM in the context of modern devel-
opments in agriculture and the wider
world.
10.2 Working IPM Systems
Three crop/pest management systems are
described: soybean, cotton and greenhouse
crops. Each system addresses a complex of
key insect pests, and problems associated
with chemical insecticide use. The range of
other control measures available and how
they are integrated to provide an IPM sys-
tem are considered in each case.
10.2.1 Pest management in soybean
The soybean Glycine max is grown in at
least 45 countries with a production of
113,069,000 tonnes. The major producers
are the USA (44%), Brazil (21%), China
(12%) and Argentina (11%) (Soyatech Inc,
1995). To produce a soybean crop that
yields economically anywhere in the world
farmers must control pathogens, insect
pests and weeds (Sinclair et al., 1997). For
many years from the 1940s onwards, pest
control in soybean relied on chemical
insecticides, but for the last two decades
concerns about farm worker safety, envi-
ronmental pollution, pest resistance to
agrichemicals and secondary pest out-
breaks have contributed to the acceptance
of IPM as the approach of choice among
soybean growers. The IPM approach advo-
cated by Sinclair et al. (1997) involves the
components outlined in Fig. 10.1 which is
based on the active participation of the
growers. Although these guidelines for IPM
in soybean are set out for pathogens and
10
Driving Forces and Future Prospects for IPM
318
chapter.10 10/7/00 11:33 am Page 318
weeds as well as insect pests, only those
relating to insects are considered here.
Soybean crops worldwide attract a large
and diverse insect fauna (Kogan, 1988) but
no more than 15 insect species normally
account for up to 99% of the pest induced
damage to soybean in most regions (Kogan,
1980). Insect induced injury can occur at
any time during the crop development
cycle: stand establishment, vegetative
growth and ower and pod growth. Stand
establishment may be affected by cutworms
that cut seedlings at ground level and open
gaps in the stand or bean ies that bore into
young stems and cause seedling death.
Soybean can, however, compensate for
minor stand reductions but rows with lin-
ear gaps of 25100 cm may suffer yield
reductions of between 5 and 10%.
Lepidopterous caterpillars (e.g. Anticarsia
gemmatalis), coleopteran adults and larvae
(e.g. Epilactina varivestis) and grasshoppers
destroy leaf tissue while aphids (Aphis
glycine), whiteies, planthoppers and
stinkbugs (e.g. Nezara viridula,
Acrosternum hilare) interfere with photo-
synthate production and translocation and
in addition many can act as vectors of plant
pathogens. Root pests such as white grubs
can cause extensive root pruning leading to
plant wilting. Injury to the reproductive
plant parts results in loss or shedding of
blossom and young pods, abortion of seeds,
seed malformation and changes in the qual-
ity of seeds. Pests such as Helicoverpa spp.,
Heliothis spp., Maruca testualis and
Matsumuraeses phaseoli larvae feed and
cause damage by scraping or boring through
pod walls into developing seeds. However,
stinkbugs are the most serious pests of soy-
bean because extensive pod feeding can
result in pod abortion. In addition
stinkbugs can transmit Nematospora coryli,
the causal agent of the yeast spot disease
(Sinclair et al., 1997).
The management tactics employed in
the implementation of IPM in soybean are
based on preventive measures including
pest exclusion, host plant resistance, bio-
logical and cultural control, combined with
remedial use of augmentative biocontrol,
biopesticides and chemical insecticides.
Driving Forces and Future Prospects for IPM 319
Identification of major pests
Preventive options Remedial options
Quantification of infestations/infections (sampling)
Decision making
(Economy injury levels)
Control options
(Feedback)
Application of control options
Evaluation of results
Crop rotation
Resistant varieties
Biological control
Cultivations
Seed treatment
Biotic pesticides
Chemical pesticides
Fig. 10.1. Components of a basic integrated pest management programme for an annual eld crop (from
Sinclair et al., 1997).
chapter.10 10/7/00 11:33 am Page 319
The preventive tactics are those associ-
ated with legislative embargoes, inspec-
tions and quarantines that are used to
prevent the introduction of soybean pests
into new areas. Genotypes of resistant soy-
bean have been identied for defoliating,
pod sucking and some stem boring genera.
Most commercial cultivars in North and
South America express resistance to deter
colonization by leaf hoppers in the form of
trichomes on leaves, stems and pods.
Genes for resistance to leaf chewing insects
(Helicoverpa zea, Epilachna varivestis,
Cerotoma trifurcata, Epicauta spp.) have
been found in the genotypes Kasamame (PI
17451), Sodendaizu (PI 229358) and
Niyaka White (PI 227687) (Clark et al.,
1972; Van Duyn et al., 1972). Cultural con-
trol practices are used to reduce all pest
categories (insects, disease and weeds) and
are listed in Table 10.1.
The damage caused by insect pests can
be affected by planting dates, e.g. the bean
leaf beetle Cerotoma trifurcata (Pedigo and
Zeiss, 1996) and seed corn maggots, Delia
platura (Hammond, 1995). The late plant-
ing of soybean in Brazil has been shown to
reduce population size of thrips which nor-
mally peak early in the season (Almeida et
al., 1988). Trap crops in soybean have been
used successfully for stinkbugs, the
Mexican bean beetle and the bean leaf bee-
tle (Hokkanen, 1991). Early planted, early
maturing soybean varieties near the main
soybean plantings have been successfully
used in the USA (McPherson and Newsom,
1984; Todd and Schumann, 1988) and
Nigeria (Jackai, 1984). A trap crop area of
about 110% of the main crop proves suf-
cient to attract up to 85% of the pest popu-
lation which can then be treated with
appropriately timed insecticide applica-
tions (Kobayashi and Cosenza, 1987; Todd
et al., 1994). Use of trap crops in this way
conserves natural enemy populations that
occur in soybean at levels capable of hold-
ing most pest species in check. Under some
circumstances more than 90% of the
stinkbug Nezara viridula eggs and nymphs
are killed by natural enemies and weather
factors before reaching adult stage (Pitre,
1983).
Remedial control measures used
against insect pests in soybean include
augmentative releases of Trichogramma
spp. against lepidopteran pests, NPV for
the velvetbean caterpillar Anticarsia
gemmatalis (Funderburk et al., 1992;
Moscardi and Sosa-Gomez, 1992) and use
of chemical insecticides (Table 10.2). In
1992 chemical insecticide use in soybean
was predicted to increase at 5% per
annum, particularly in South America
(Rosier, 1992). All over South America
soybean receives the largest amount of
insecticide (Campanhola et al., 1995).
However, the introduction of various IPM
programmes has seen a reduction in some
areas, for instance in Argentina an IPM
programme focusing on control of defoli-
ating caterpillars and green stinkbugs (N.
viridula) has reduced the number of insec-
320 Chapter 10
Table 10.1. Cultural practices for control of insect, disease and weed pests in soybean (Sinclair and
Backman, 1989).
Avoidance of water decit or excess
Minimization of plant stress by providing optimum nutrients and soil pH
Proper harvest date
Proper harvest to avoid seed injury
Proper storage conditions
Use of non-host buffer crop(s)
Use of trap crops
Crop rotation, optimum nutrients and soil pH
Soil tillage prior to planting
Planting of high quality seeds
Proper planting date
Proper row spacing
chapter.10 10/7/00 11:33 am Page 320
ticide treatments from 23 per season to
an average 0.3 treatments, corresponding
to savings of US$1.2 million per year in
pesticides and application costs. Similarly
in Brazil an IPM programme which has
been adopted by about 40% of soybean
farmers has achieved savings of over
US$200 million annually due to reduced
use of insecticides, labour, machinery and
fuel (Iles and Sweetmore, 1991).
In Brazil and Paraguay the reduction of
chemical use has been achieved through
the availability and use of the NPV biopes-
ticide Baculovirus anticarsia for control of
the velvetbean caterpillar. The production
of this virus in Brazil was initially done by
EMBRAPA/CNSPO but has since been
transferred to four private sector compa-
nies. In Paraguay, growers cooperatives are
presently producing large amounts of B.
anticarsia for use (Campanhola et al.,
1995). In the 1988/89 season 19,000 ha
were applied with the biopesticide in
Paraguay, while in Brazil it is estimated
that 1 million hectares are sprayed annu-
ally (Moscardi and Sosa-Gomez, 1992).
Parasitoids, particularly Trichogramma
spp., are also widely used for control of
lepidopteran pests. Over 20 private organi-
zations produce parasitoids in Columbia
and 12 in Venezuela. A. gemmatalis,
Omiodes indicata and Semiothisa abydata
are signicantly attacked by naturally
occurring Trichogramma species and
timely release of mass reared individuals
can maintain these pests below the eco-
nomic damage level (Campanhola et al.,
1995; Table 3.4; Section 3.9.3).
Economic damage levels have been deter-
mined for all major insect pests of soybean
and a variety of grower sampling and moni-
toring techniques have been devised
(Sinclair et al., 1997). Numerous models,
developed to describe the population
dynamics of insect pests and their natural
enemies, coupled with soybean growth mod-
els, have been developed to assist in deci-
sion making for soybean pest management,
e.g. SOYGROW (Mishoe et al., 1984) and
AUSIMM (Herbert et al., 1992). However,
AUSIMM, which was developed as a deci-
sion aid for growers in Alabama, USA was
not taken up by growers. The reasons given
for this were: lack of funds for implementa-
tion, technical complexity of the product,
inadequate collaboration with extension
specialists, institutional inertia towards
research/extension cooperation, an inability
to demonstrate a great increase in net prots
and the requirement of a computer for grow-
ers to use the software (Mack, 1992).
10.2.2 Pest management in cotton
Cotton (primarily Gossypium hirsutum but
also G. barbadense) is grown in over 70
countries and is the most important bre
crop grown worldwide (Gutierrez, 1995;
Matthews, 1997b). Annual global produc-
tion is approximately 19 10
6
t lint
(Gillham et al., 1995) with China leading
production followed by the USA, Central
Asia, India, Pakistan, Brazil and Egypt. The
need for irrigation and the dominant inu-
ence of pest problems in most systems
greatly affects potential prots by increas-
ing production costs and reducing yield
(Luttrell et al., 1994). Insects are a major
constraint and cotton was one of the rst
crops on which insecticide use reached
unacceptable levels. The problems that
subsequently arose had a dramatic impact
on the cotton production industry and led
to a concerted effort to nd alternative sys-
tems of pest management.
In the USA misuse of chemical pesti-
cides to control Lygus hesperus in the
1960s in the San Joaquin Valley induced
other more serious pests, such as the cotton
bollworm (Heliothis zea) and a number of
defoliating noctuids (Spodoptera exigua,
Trichoplusia ni and Estigmene acraea;
Driving Forces and Future Prospects for IPM 321
Table 10.2. Insecticide use in soybeans (from Rosier,
1992).
Country Market (US$ millions)
Argentina 18
Brazil 57
USA 132
Others 13
Total 220
chapter.10 10/7/00 11:33 am Page 321
Gutierrez, 1995). In the Imperial Valley of
California the pesticide induced outbreaks
of whiteies, mites and insecticide resis-
tance to Heliothis virescens caused eco-
nomic ruin in the 1980s and the industry
effectively collapsed, falling from c. 44,000
ha of production to c. 6000 ha. In the
Sudan, the use of aerial applications of
chemicals so reduced the impact of natural
enemies that the cotton suffered major out-
breaks of whiteies, Bemisia tabaci, the
honeydew from which encouraged sooty
moulds to the extent that the lint was
downgraded (Eveleens, 1983). During the
1950s in Peru extensive aerial application
including over 30 sprays per season of
DDT, parathion and toxaphene caused the
death of and poisoned thousands of people
(Matthews, 1997b). Overall, the overuse
and misuse of chemicals in cotton pest
management represents an abject lesson in
what not to do with a toxicant in an agri-
cultural system, creating more problems
than it solved.
Wherever cotton is grown in the world
there exists an impressive array of pest
insects that are associated with reductions
in yield. There are pests from ve different
orders, Lepidoptera, Hemiptera, Coleoptera,
Thysanoptera and Acarina, although a com-
plex of Lepidoptera including the cotton
bollworms Heliothis and Helicoverpa,
spiny bollworms Earias spp. and red boll-
worm Diparopsis spp. are most well
known. The cotton boll weevil
Anthomonas grandis, the tobacco bud-
worm Heliothis virescens and plant bugs
such as jassids, whiteies and aphids (par-
ticularly Bemisia tabacci and Aphis
gossypii) can cause excessive fruit loss.
The Lygus bugs attack very small fruits
hence the plant has time to compensate for
this damage unless the rate of loss is high
(Gutierrez, 1995). However, boll weevils
and bollworms attack more mature fruits
making it more unlikely that the plants can
compensate, hence damage tends to be
greater from these pests. The pink boll-
worm Pectinophora gossypiella similarly
causes most damage when it attacks mature
bolls and yield losses accrue through
destruction of seed and reduced lint qual-
ity (Gutierrez et al., 1977; Stone and
Gutierrez, 1986a,b).
Mites, particularly the red spider mite
Tetranychus urticae, kill cells in photosyn-
thetically active leaves and hence have an
impact on yield. Insect defoliators such as
Spodoptera exigua and Trichoplusia ni
also reduce availability of photosyntheti-
cally active area but only have a signicant
effect on yield when they attack young
leaves (Gutierrez, 1995). Yield may also
be reduced by stem borers such as
Eutinobrothrus brasiliensis that kill whole
plants and stunt the growth of others; this
can be prevented by application of seed
treatments (Dos Santos et al., 1989).
Chemcial insecticides remain the major
tactic for insect pest control in cotton. Most
cotton is routinely examined for insect pest
damage with private consultants providing
scouting services in the USA and Australia
(Fitt, 1994; Luttrell et al., 1994). In
Australia, scouts examine up to 60 plants
per 100 ha, 23 times per week whereas in
the USA most elds are scouted 12 times
per week and samples are generally based
on examination of 100 terminal buds and
fruiting forms per 2040 ha. The use of
scouting in Andhra Pradesh cotton by both
state and federal agencies has reduced the
number of pesticide applications from as
many as 20 to 36 (Raheja, 1995). Cotton
consumes 50% of the insecticides used
annually in India even though it occupies
only 5% of the cultivated area; 80% of syn-
thetic pyrethroid consumption is conned
to cotton alone. Hillocks (1995) lists the
insecticides used in cotton in Africa
including: Endosulphan for Lygus,
American bollworm, spiny bollworm and
cotton leafworm control, Pirimicarb for
Aphis gossypii control, Amitrax for red spi-
der mite and whitey control and
Dimethoate for cotton stainers.
Although economic threshold levels for
pesticide application against key pests
have been known since the 1950s in coun-
tries such as Sudan they were not modied
over decades which resulted in the appli-
cation of insecticides at lower densities
322 Chapter 10
chapter.10 10/7/00 11:33 am Page 322
than was actually necessary (Zethner,
1995). A wide variation in threshold values
exists across and within different cotton
systems for specic pests. Thresholds for
Heliothis species in Brazil range from 10 to
40% of the squares infested by larvae rela-
tive to crop phenological development
(Table 10.3). Assuming a density of 10
plants m
2
and 5 fruits/plant, thresholds
are 420 larvae per 100 plants, 525 larvae
per 100 plants, 1020 larvae per 100 plants
and 50200 larvae per 100 plants in the
USA, the Commonwealth of Independent
States (former USSR), Australia and Brazil
respectively.
The use of thresholds has not pre-
vented the need for insecticide resistance
management strategies in some countries
to extend the useful life of some chemical
insecticides. The most successful has
been the pyrethroid resistance manage-
ment strategy adopted in Australia (see
Case Study in Chapter 4, p. 110) which
conned the use of pyrethroids to a
dened period each year on all crops
(Forrester et al., 1993) in order to reduce
the selection pressure on the major pest
Helicoverpa armigera. While this strategy
enabled farmers to continue growing cot-
ton, an alternative IPM programme is
urgently needed and research on trans-
genic cotton and other tactics is currently
being developed (Matthews, 1997b).
The transgenic cotton Bollgard
con-
taining a Bt gene was rst commercialized
in the USA in 1996 on 729,000 ha which
then increased to just over one million
hectares a year later, followed in 1998 by
planting of around 2 million hectares
(Merritt, 1998). During 1998 China planted
53,00 ha, Mexico 40,500 ha, Australia
81,000 ha and South Africa 12,000 ha. In a
three year study in Mississippi, USA where
Bt cotton was compared with conventional
cotton, Bt cotton received on average 6.7
sprays compared with 11.7 sprays on con-
ventional elds (Stewart et al., 1998). The
Bt cotton costs, at $61.48 per acre (which
includes a $32 technology), were lower
than the insecticide costs of $68.15 per
acre in conventional cotton. In addition, in
some Bt cotton crops higher levels of bene-
cial insects were found than in conven-
tional crops (Stewart et al., 1998) while in
others no differences have been demon-
strated (Van Tol and Lentz, 1998).
Natural enemy populations have also
been shown to be enhanced when mating
disruption is used for the control of P.
gossypiella (Campion et al., 1989). Today,
almost all pink bollworm management is
achieved by using the synthetic pheromone
Gossyplure (Howse et al., 1998). With the
development of Gossyplure combined with
appropriate slow release formulations
(Campion et al., 1989; Critchley et al.,
1989) cotton growing countries affected by
pink bollworm seized eagerly on the new
mating disruption strategy. The Egyptian
Ministry of Agriculture, more than any
other, has made a signicant contribution
to the use of pheromones for pink
Driving Forces and Future Prospects for IPM 323
Table 10.3. Economic thresholds for cotton pests in Brazil (from Ramalho, 1994).
Critical
period
Species (days) Economic threshold Sampling site
Aphis gossypii 1060 71% plants infested All of plant
Frankliniella sp. 1025 6 nymphs and/or adults per plant All of plant
Anthomonas grandis 40120 10% infested squares Medium squares upper of plant
Heliothis virescens 5060 40% infested squares by larvae 1/3 grown squares from upper of plant
Heliothis virescens 80120 10% infested squares by larvae 1/3 grown squares from upper of plant
Pectinophora 75120 11% hard bolls damaged First hard bolls from top to plant
gossypiella bottom
chapter.10 10/7/00 11:33 am Page 323
bollworm control with 300,000 acres of
cotton (36% of the countrys cotton) treated
in 1994.
The use of mating disruption as a con-
trol technique tended also to reduce the
severity of outbreaks of secondary pests,
probably due to the conservation of natural
enemy populations. However, it is unlikely
that natural enemy populations can control
all secondary pests; this is certainly
thought to be the case of Helicoverpa spp.
(Titmarsh, 1992). Augmentative control of
Helicoverpa using the egg parasitoid
Trichogramma spp. suggests that the
approach is not economically viable in US
cotton systems (King and Coleman, 1989).
However, in Usbekistan where there are
now over 700 factories producing
Trichogramma pinoi and to a lesser extent
Bracon herbetos, the approach is consid-
ered a highly effective means of controlling
H. armigera and Agrotis moths (Matthews
1997b). Other natural enemies such as the
entomopathogens, Bt and NPVs have been
used against H. virescens and H. zea and
although they are not widely applied,
interest is increasing (Luttrell, 1994).
A variety of other control techniques
including lure and kill for the boll weevil
A. grandis (McKibben et al, 1990; Smith et
al., 1994), host plant resistance obtained
through various morphological and bio-
chemical traits (Fisbie et al., 1989; King
and Phillips, 1983) and cultural controls
such as destruction of stubble to reduce
over-wintering pupal populations of H.
armigera (Fitt and Daly, 1990) are used in
different parts of the world. The impacts of
a variety of control measures have been
incorporated into complex management
systems utilizing simulation models and
expert systems (Luttrell, 1994) but in most
situations simple decision rules have been
devised to integrate measures (Fig. 10.2). In
Asia, a farmer participatory approach to
cotton IPM has been tested (Anon., 1999).
An IPM approach evaluated at Wanshong,
China included a range of control measures
(Box 10.1) that provide cotton yields com-
parable with conventional farmer practice
and reduced the number of insecticide
applications necessary by 29%. This
reduced total input costs leading to prots
7.5% higher per hectare than was achieved
324 Chapter 10
Synchronous
sowing of
resistant
cultivar
Conserve
natural
enemies
Seed
treatment
Select insecticides
carefully in relation to
IRM and pest species
AVOID
insecticides
AVOID
insecticides
Monitor crops
twice weekly,
spray only
according to
action thresholds
Uproot
plants,
destroy
crop
residues
Weeks 0 6 20 36
Fig. 10.2. Integration of some of the tactics that can be used in an IPM programme. In some countries it is
possible to deploy pheromones for confusion or lure and kill as well as monitoring pest populations (after
Matthews, 1997b).
chapter.10 10/7/00 11:33 am Page 324
in the standard practice plots. Although
such approaches are yet to be tested on a
large scale, the involvement of farmers in
such studies increases the likelihood
of widespread adoption of similar
approaches. New initiatives to implement
IPM are now underway in cotton growing
areas most affected by problems of insecti-
cide resistance in China, India and
Pakistan (Matthews, 1997b).
10.2.3 Pest management in greenhouse crops
The global greenhouse (plastic plus
glasshouses) industry covers an area of
279,000 ha (Wittwer and Castilla, 1995) but
the monetary value of the industry well
exceeds what might be expected from such
a relatively small hectarage. In the
Netherlands only 0.5% of the area in use
for agriculture is covered with glasshouses
(9300 ha) but on this small area, 17% of the
total value of agricultural production is
realized (van Lenteren, 1995). In 1992, the
value of Dutch greenhouse vegetables was
US$31.7 million (Snyder, 1993). Crops
grown under glass/plastic are thus high
value crops such as tomato, cucumbers,
sweet peppers, aubergines and ornamentals
(including owers). Growing vegetables in
a protected environment under glass is
rather expensive and pest damage cannot
be tolerated. For ornamentals, the situation
is even more serious because the presence
of even extremely low numbers of pests
may prevent export and therefore a zero-
tolerance may be enforced (van Lenteren,
1992b). Given this situation, chemical
insecticides with quick knock-down would
seem the obvious rst choice as a control
measure, especially as chemicals are easy
and relatively inexpensive to apply.
However, the development of resistance to
chemical insecticides in several key pests
in greenhouses has led to an increasing
interest in biological control.
Small scale application of biological
control in glasshouses started in 1968 with
the use of the predatory mite Phytoseilius
persimilis and the whitey parasitoid
Encarsia formosa has been used commer-
cially since 1970 (van Lenteren, 1992b;
1993). Currently, biological control of the
two key pests in greenhouses; whitey
(Trialeurodes vaporarium) and spider mite
(Tetranychus urticae), is now applied in
more than 20 out of a total of 35 countries
with a greenhouse industry (van Lenteren,
1995). The other major pests of greenhouse
crops are listed in Box 10.2; in addition
Sciaridae and some Lepidoptera are also a
problem.
A range of pest control measures are
used in protected crops including cultural
methods, chemical insecticides, biopesti-
cides, host plant resistance and a limited
use of pheromones. Pesticides are more
widely used for pest control in ornamen-
tals than in vegetables largely because
Driving Forces and Future Prospects for IPM 325
Box 10.1. Methods used in the IPM cotton plots at
Wenshang in China (Anon., 1999).
Trialeurodes vaporariorum
Tetranychus urticae
Bemisia tabaci
Liriomyza spp.
Thrips tabaci
Frankliniella occidentalis
Otiorrhynchus sulcatus
Myzus persicae
Aphis gossypii
Macrosiphum euphorbiae
Box 10.2. Pest insects of glasshouse vegetable and
ornamental crops.
Ploughing and irrigation of the elds after harvest
for control of overwintering Helicoverpa pupae
Minimal use of organophosphate insecticides on
wheat to encourage build up of natural enemies
which later migrate to cotton
Irrigation during MarchMay to increase humidity
to help control red spider mites
Dipping growing tips of seedlings in insecticides
for aphid control in place of sprays
Use of Bacillus thuringiensis against bollworms
Topping and bud thinning to increase boll
shedding rate and number of fruiting points per
plant
Minimal insecticide use
chapter.10 10/7/00 11:33 am Page 325
there are more available, the whole plant is
marketed so no leaf damage is allowed and
there is a zero-tolerance to damage for
export material (van Lenteren, 1995). Non-
pesticide control measures for ornamentals
tend to be only used for non-export crops.
In vegetable crops several of the aphid
pest species can be controlled with the
selective insecticide pirimicarb but Aphis
gossypii which is resistant to pirimi-
carb occurs frequently on cucumber.
Organophosphates may be used to kill
thrips or alternatively application of poly-
butenes mixed with deltamethrin can be
applied topically on plastic sheeting that
covers the soil and is picked up and kills
thrips when they leave the plant (van
Lenteren, 1995). Thrips (Frankliniella occi-
dentalis and Thrips tabaci) can also be
controlled by releases of Amblyseius
species leading to a rapid increase in their
use in IPM programmes.
Soil sterilization is used in crops such
as tomato largely to control diseases but it
also has an impact on Liriomyza spp.
(leafminers). Unfortunately red spider mite
(T. urticae) and the tomato looper
(Chrysadeixis chalcites) tend to survive
soil sterilization. The looper can be con-
trolled using Bt while T. urticae requires a
combination of chemical control and the
use of Phytoseiulus persimilis (Table 10.4).
Tomato cultivars that are resistant to white-
ies are available (de Ponti et al., 1990).
Host plant resistance is a relatively new
approach to insect pest control in
glasshouses. Levels of resistance in cucum-
ber have been identied for control of spi-
der mites and thrips (F. occidentalis; de
Ponti, 1982; Mollema et al., 1993).
IPM has been promoted and supported
in the glasshouse crops industry by a com-
bination of grower participation, IPM
labels and the availability of suitable deci-
sion support systems. Several expert sys-
tems have been developed for greenhouse
applications, providing advice on a range
of factors such as plant nutrition and tem-
perature control (Gohler, 1989) as well as
pest control (Clarke et al., 1994). In gen-
eral, however, IPM has gained favour with
growers working in greenhouses because:
Of chemical resistance in key pests.
Biological control is cheaper than
chemical control.
The release of biocontrol agents is
more pleasant and safer than chemicals.
Biocontrol agents do not require a
safety period prior to harvesting.
The release of biocontrol agents usu-
ally occurs after the planting period when
the grower has plenty of time to check for
successful development of natural ene-
mies, thereafter it is reliable for many
months, whereas chemical control requires
continuous attention (van Lenteren, 1995).
10.2.4 Lessons learnt
While it is acknowledged that the types of
lessons that can be learnt from case studies
of pest management are to a large extent
dependent on the systems selected, the
case studies used here do highlight a num-
ber of factors of general importance.
326 Chapter 10
Table 10.4. Commercially applied IPM programme for tomato crops (after van Lenteren, 1995).
Pests IPM programme
Trialeurodes vaporariorum Encarsia formosa
Tetranychus urticae Chemical control; Phytoseuilus persimilis
Liriomyza bryoniae;
L. trifolii; L. huidobrensis Dacnusa sibirica; Diglyphus isaea
Noctuid spp. Bacillus thuringiensis
Aphid spp. Aphidoletes aphidimyza; Aphidius matricariae; Aphidius colemani
chapter.10 10/7/00 11:33 am Page 326
The rst of these is that the force for
change in each of these three crop/pest
systems has been the development of pest
resistance to chemical insecticides. In each
case this has led to the failure of insecti-
cide to control the key pest, decimation of
natural enemy populations and secondary
pest outbreaks. The provision of informa-
tion and training has proved important in
convincing growers and farmers of the
value of alternatives to chemicals, whether
provided in terms of sophisticated expert
systems or through farmer participatory
approaches. The alternative control mea-
sures adopted vary widely and the relative
mix used is dependent on the cropping
systems, particularly with regard to cul-
tural control methods. A number of tech-
nologies may not be as effective as the
chemicals they replace but all those
adopted have proved economic. Where
chemicals constitute part of an IPM system
then selective use of insecticides combined
with thresholds for application have been
used. An understanding of the crop yield
and physiology particularly with regard to
yield compensation for damage, combined
with a good knowledge of insect pest ecol-
ogy have also proved essential in optimiz-
ing interventions.
Each of the above systems soybean,
cotton and greenhouse crops are well
studied. A great deal of research effort has
been dedicated to solving the problems
posed by insect pests to these crops. Effort
has also been applied to redressing prob-
lems created by the use of inappropriate
solutions to their control that have been
tried over the years. The process by which
we have tackled pest management prob-
lems and the means by which we have
derived solutions can perhaps tell us as
much about how to develop more success-
ful approaches in the future as can the
detail of what has been achieved in terms
of control. A better understanding of the
process by which we can develop success-
ful IPM systems may ensure we make
fewer mistakes in the future.
10.3 Panaceas, Paradigms and
Pragmatism
The history of pest management (Chapter
1) is a history of panaceas and paradigms;
some of the greatest failings of pest control
have come about quite simply because of
the limitations imposed by both. A panacea
may be described as a universal medicine
a solution to all ills, whereas a paradigm is
a common way of thinking, approach, goal
or established scientic opinion that is
shared by particular scientic communities
(Dent, 1995). Examples of paradigms
within pest management include IPM
(Perkins, 1982; Morse and Buhler, 1997),
deterministic models of natural enemy
population dynamics, and the pursuance of
vertical resistance for insect resistance
breeding (Dent, 1995). The use of analytical
models to study natural enemy dynamics
during the 1970s and early 80s was carried
out under the guise of providing a greater
understanding of factors inuencing the
success of biological control but there is lit-
tle evidence that such studies contributed
much to the actual practice of biological
control. In fact, the results of theoretical
studies were used as a basis to narrow
down the attributes of natural enemies con-
sidered appropriate for biological control
characteristics which mitigated against the
potential benets of predators in favour of
parasitoids. The basis for this selection has
been the theoretical ability of host specic
parasitoids to depress pest population lev-
els to new, low and stable equilibrium lev-
els (Beddington et al., 1978; Hassell 1978,
1980, 1982; Waage, 1983). However, the
depression of pest populations to a new
but lower stable equilibrium level is actu-
ally an unnecessary pre-requisite for
achieving effective control. Provided a pest
population can be maintained below its
economic threshold it is irrelevant whether
or not the pest population is stable or not.
Low stable equilibria have always been
sought because it had been assumed that if
the pest population became extinct then so
would the natural enemy and that this
would be undesirable. If you remove the
Driving Forces and Future Prospects for IPM 327
chapter.10 10/7/00 11:33 am Page 327
need to obtain low stable equilibria then it
opens up the possibility of predators being
suitable biocontrol agents, largely because
when pest populations become extinct,
predators can switch to alternative prey
and hence, be preserved in the absence of
the pest. Thus, the use of the theoretical
models limited what was actually
attempted in practice.
A similar situation is evident in the host
plant resistance paradigm where the pre-
dominance of the vertical resistance,
Mendelian school of genetics in plant
breeding has essentially precluded devel-
opment of cultivars utilizing horizontal
resistance (Chapter 5; Robinson, 1991).
Given the only limited success of breeding
resistance to insect pests it is quite surpris-
ing that the conventional approach was not
more rigorously questioned. This may have
been because the debate was deected by
entomologists becoming preoccupied with
the mechanisms rather than the genetics of
resistance.
Paradigms that inuence pest manage-
ment are not just those associated with
research and development. The subjects of
anthropology and socio-economics have
had a major impact on the approaches
taken in pest management particularly
farmer participatory approaches to IPM.
For many years the main emphasis in both
the research and practice of insect pest
management has been the development
and use of various insect control tech-
niques. Such a focus of attention implies a
single-interest strategy that excludes the
pest from its total natural and social envi-
ronment (Gabriel, 1989). This separation of
insect pest management from the social
and human aspects of the pest problem
inevitably leads to poor targeting of
research, the development of inappropriate
technology and, subsequently, to poor rates
of adoption. The work and reappraisal of
the role of farmers/communities in devel-
opment undertaken by Chambers (1983)
created a paradigm shift, through the real-
ization that the failure to properly involve
farmers in development issues contributed
to failure in development programmes.
The situation with regard to pest man-
agement can be best described using the
terminology of Andrews et al. (1992) who
categorized pest management systems by
scale and the degree to which farmers par-
ticipated in implementation. Essentially,
there are two models, the Farmer by-pass
model and the Farmer as protagonist
model. The former applies to a regional
pest management system where there is a
minimal farmer and extension involvement
(e.g. SIT, quarantine and classical biologi-
cal control). Such approaches are biased
towards straightforward research pro-
grammes uncomplicated by outreach and
extension. The Farmer as protagonist
model takes into account the ecological
and social heterogeneity of farming sys-
tems and the need for site specic decision
making, selection and use of control mea-
sures. Further subdivision of these models
is possible in terms of whether research
and implementation is participatory or
non-participatory.
The approach prior to the paradigm shift
(Chambers, 1983) was very much non-
participatory research, non-participatory
implementation where research was under-
taken in isolation of farming systems and
implementation was also carried out totally
independent of farmers who were seen sim-
ply as the beneciaries of the outcome. A
common model that still largely persists is
the non-participatory research, participa-
tory implementation model, i.e. the top
down approach where scientists involved
in fundamental research develop new con-
cepts, devices etc. that are adapted by
applied scientists and tested by extension
scientists in collaboration with inuential
farmers. These models have traditionally
been used for the development and adop-
tion of pest control products such as chemi-
cal insecticides that can be packaged in
simple ways to promote dissemination and
adoption (Dent, 1995). However, the
approach is less effective when information
rather than inputs are to be disseminated
and has proven useful for techniques such
as conservation of natural enemies and
habitat modication (Andrews et al., 1992).
328 Chapter 10
chapter.10 10/7/00 11:33 am Page 328
The paradigm shift changed the empha-
sis from these non-participatory research
approaches to one of participatory
research, participatory implementation
which takes as its central premise that
engaging the farmer in the research process
will ensure that the research is pertinent to
farmers needs and hence will mean that
there is more likelihood that the products
of such research will be adopted by farm-
ers. Participatory research participatory
implementation more readily suits the
complex needs of IPM systems where on-
farm research is used to identify the con-
straints to performance of baskets of new
technologies (Sumberg and Okali, 1989).
The farmer eld school approach is the
epitome of the participatory research and
implementation model where farmers carry
out their own ecosystem analysis, deter-
mine which control measures to assess and
then carry out their own evaluations.
The value of paradigms to science is
that they focus effort and create a frame-
work for scientists who are practitioners of
a scientic speciality to make up a discrete
community in the knowledge that each
shares a common approach, goals and
opinions. The paradigm has a key role in
the furtherance of scientic endeavour
because research progresses within a
framework of paradigms until their limita-
tions and constraints become overwhelm-
ingly apparent. Then through the efforts of
extraordinary scientists (here I refer also to
social scientists) or scientic phenomena,
the prevailing paradigm is supplanted by
another (Musgrave, 1980; Shapere, 1980;
Medawar, 1981, 1986). Herein lies the
problem with the paradigms that have
shaped pest management (including IPM)
to this day. Paradigms can limit scientic
progress and they do this by: (i) creating
problems that do not exist by adherence to
a particular division, polarization and con-
ceptualizations; (ii) acting as conceptual
traps or prisons which prevent a more use-
ful arrangement of information; and (iii)
through blocking by adequacy (de Bono,
1970). Thus, paradigms can actually limit
the scope for solving pest management
problems, as is apparent from the examples
above, for analytical models and
Mendelian approaches to host plant resis-
tance breeding. Paradigms, however, have
an impact beyond the scientic commu-
nity: paradigms tend to be readily adopted
by politicians and funding agencies as a
means of prioritizing support for research
hence, the emphasis given to the funding
of IPM socio-economic approaches, gender
issues and more recently farmer participa-
tory and farmer eld schools in pest man-
agement. This is not to say that these are
not valid or valuable areas for funding but
the problem comes when equally valid or
valuable activities are ignored just because
they do not t within the current ortho-
doxy or paradigm. The impact of this is
that you do not necessarily obtain the
funding support for the most appropriate
solution to a problem but just the one that
is currently in vogue. Sadly, the history of
pest management is littered with such
examples.
The situation is no different for
panaceas in pest control the new pest
management technologies that have been
developed over the last 50 years that have
been heralded as the new solution to pest
control are numerous, e.g. SIT, pheromones,
high yielding dwarf cultivars different
classes of insecticides, organochlorines,
organophosphates, carbamates, pyrethroids,
Bt, NPVs etc. Each of these product based
control measures, at their time of introduc-
tion, received funding support, and were
greeted with great enthusiasm until the limi-
tations in their development and more often
their use, became apparent. Biotechnology
represents a current paradigm and trans-
genic crops represent the current predomi-
nant panacea receiving disproportionate
amounts of research funding and support
compared to many other equally valuable
approaches and products. Paradigms and
panaceas limit the ability of stakeholders to
fund the most appropriate solutions to pest
management problems. It is important for
decision makers to be aware of this fact and
to understand that the only logical and sen-
sible solution is to adopt a more pragmatic
Driving Forces and Future Prospects for IPM 329
chapter.10 10/7/00 11:33 am Page 329
approach to problem solving that avoids the
error of locking in to a particular develop-
ment path (Norton, 1993). This can be
achieved through a decision tool approach
which provides techniques to analyse the
factors leading to a particular problem and
considers all of the available options before
selecting the most appropriate solution for
solving the problem (Norton and Mumford,
1993). Thus, a more objective approach to
the problem of improving pest management
is provided and avoids preconceived
notions, based on predominant paradigms
of how improvements can be best achieved
(Norton, 1993).
10.4 Models, Information
Technology and Communication
Technology in IPM
Throughout this book reference has been
made to and examples given of many dif-
ferent types of model. There have been
examples of models used to forecast pest
abundance (Chapter 2), models to simu-
late plant growth and pest damage
(Chapter 3), models to explain the interac-
tions between pests and their natural ene-
mies (Chapter 6). These models have been
of different types and forms but the fact
that they are now used in most areas of
insect pest management says something
for their utility.
Models are representations of a system.
They attempt to mimic the essential fea-
tures of a particular system where a system
is taken as a limited part of reality.
Rabbinge and de Wit (1989) distinguished
four main levels of system in agriculture,
pathosystems, cropping systems, farming
systems and agroecosystems. As discussed
in Chapter 5, a pathosystem includes a sin-
gle host and parasite population and their
interactions. These may be described by
population genetics, dynamics and crop
physiology (Rabbinge and de Wit, 1989). A
cropping system may have a number of
pathosystem components but will only
deal with a single crop or intercrop.
Agronomic and pest management practices
and their economics are also encompassed
within the cropping system.
A farming system consists of a number of
different crops, their interactions, econom-
ics and management, and is also a subsys-
tem of an agroecosystem. Agroecosystems
are ecosystems adapted by mankind to serve
their own needs and they are characterized
by their component recognizable structure.
This structure will consist of functional
relations among the different components
(Rabbinge and de Wit, 1989). Most models
that have been formulated in insect pest
management deal with the pathosystem and
cropping system levels mainly because at
these levels the amount of available infor-
mation makes models less speculative.
Models then, seek to mimic an existing
system. If the literature were studied it
might be thought that the only way to rep-
resent such systems would be through a
series of mathematical formulae, and while
it has to be accepted that most models
require a certain level of mathematical dex-
terity, they all start at a conceptual level
that requires no mathematical knowledge
or ability. It is perhaps at this conceptual
level that modelling can make one of its
greatest contributions to insect pest man-
agement. This is because, if generally
adopted as a method, scientists would have
to dene more closely the system with
which they were working and, by doing so,
focus their attention on the problem, in a
way that can only improve scientic
method.
Insect pest management is an apparently
complex subject which is often too difcult
to comprehend fully. Even separate compo-
nents of the subject present diverse and
complicated interactions, for instance, the
relations between weather, insect popula-
tion dynamics, damage, yield loss and eco-
nomic application of an insecticide. If the
interactions of natural enemies and the
effects of agronomic practices or use of
resistant plant cultivars are also included
then it is clearly a complex situation in
which it is difcult to envisage the role and
effect of each interaction. When dealing
with such complexity, unless the system is
330 Chapter 10
chapter.10 10/7/00 11:33 am Page 330
formalized in some way, it is very difcult
to maintain a balanced and holistic per-
spective. This can lead to biases in empha-
sis, a narrowing of approach and adopted
options, poor decision making and commu-
nication. If a system is formalized as a con-
ceptual model the complexity is placed in
a more objective context. Just the exercise
of assembling and formulating all known
information about a system forces clear and
concise thinking. It also helps to identify
key processes or decisions and gaps in
our knowledge, as well as highlighting
untested assumptions and emphasizing the
potential importance of elements of the
system and their interconnection which,
without the modelling process, may have
seemed of little importance (McKinion,
1989). Such conceptual models are qualita-
tive and are usually produced as a diagram
where each of the components are identi-
ed and their inter-relations depicted as
connecting lines or arrows (Fig. 10.3).
Southwood (1978) referred to these as dior-
istic models, where dioristic means serving
to dene. Although only an initial step in
the development of a model it is an impor-
tant process since it forces the modeller to
consider and dene the objectives of the
model, the system boundaries and inter-
relations of the different components of the
system. It is this aspect of modelling that
clearly relates to the basic tenets of good
scientic method and which, if adopted,
whether at the level of strategic planning in
a research institute or the design and exe-
cution of a simple laboratory experiment,
will greatly improve research in insect pest
management. The complexity and diversity
of IPM and insect pest management have,
especially at some higher levels, encour-
aged some woolly thinking which is some-
thing a modelling approach would help to
reduce.
The dening of objectives makes the
modeller consider the present status of a
situation where are we now? and the posi-
tion that is needed at the end of the exer-
cise where do we want to get to? (Tait,
1987). These are important questions! The
Driving Forces and Future Prospects for IPM 331
Fig. 10.3. A simple conceptual model of the California cotton product system (after Gutierrez, 1987).
chapter.10 10/7/00 11:33 am Page 331
rst is usually considered by all entomolo-
gists since it has an immediate inuence
on the work they currently propose to carry
out and any good scientist should be well
informed on the current status of their sub-
ject. The second question is, however, one
that is only rarely considered and, even
less often, clearly and unambiguously
dened. The end objective and the nal
form of the programme are rarely consid-
ered at the problem formulation stage. If
insect pest management is to pass success-
fully from research and on to implementa-
tion then greater emphasis needs to be
placed, at the outset, on how this is to be
achieved. The objectives considered must
extend beyond initial questions to the
implications of their solutions. Conceptual
models can help to clarify objectives
because in formulating a model an end
point has to be considered and dened. It
may become apparent during the process
that the model reects only a small part of
a larger system, providing the opportunity
to dene the role of this sub-model and
place it in the context of the objectives of a
larger systems model. This is, however, the
nub of the problem. There are major draw-
backs associated with any form of problem
framing because the objectives can only be
based on a persons initial perception of
the problem. If the person involved does
not perceive the relations and interconnec-
tions that exist with other much larger sys-
tems then this could place the analysis of
the problem in jeopardy simply because
the wider implications of the larger system
are not taken into account (Tait, 1987).
This is where the involvement of scientists
from a range of disciplines in insect pest
management and IPM can have a denite
benet. The perspective provided by a
multidisciplinary team can only serve to
broaden the groups perception of a prob-
lem with the result that the larger systems
of interconnecting problems should be
more readily identied. Once identied
their importance and inuence can be eval-
uated.
The decision as to what to include in
the model is part of the process of dening
the systems boundaries. On the one hand
there is the problem of the need to include
all relevant aspects of the system, on the
other is the need to keep the scope of the
model within manageable proportions. At
the start, the number of variables will be
increased and as a result the model will
begin to reect reality, but a point will be
reached where the addition of new vari-
ables and an increase in the number of
interactions will divert attention away
from more important variables already pre-
sent (Rabbinge and de Wit, 1989). There is
some argument as to whether models
should be complex and a top down
approach be adopted, i.e. a complex model
is reduced in size and complexity until it
can be reasonably validated, or the con-
trasting bottom up approach used, i.e.
where the simplest explanation is initially
considered and complexity is increased if
the model is unsatisfactory (Vansteenkiste,
1984). There is, of course, no single correct
solution to this argument. Each model and
system will be different and the boundaries
of the system and the complexity of the
model will invariably be determined by the
objectives of the study. The aim during any
modelling exercise must be to produce suf-
cient checks in the procedure to ensure
that the model becomes neither too sim-
plistic nor too complex, but that it contains
descriptions of the key processes and pro-
vides an adequate reection of the system.
The conceptual elements of model for-
mulation, of problem framing, system
description and identication of objectives
and constraints represent only the initial
stages in the systems analysis (Fig. 10.4).
Next, it is important to identify the route(s)
by which the objective may be obtained
and then to formulate measures of perfor-
mance by which the model can be
assessed. The measures of performance are
the criteria by which the effectiveness of
the model is judged. These may be based
on the degree to which the model agreed
with accepted theory, actual events, or eco-
nomic criteria, but in each case work has to
be carried out to test the model, to validate
it relative to these performance criteria. In
332 Chapter 10
chapter.10 10/7/00 11:33 am Page 332
this sense a model is only a complex
hypothesis that, like any other hypothesis,
needs to be falsied by experiment. A great
deal of modelling methodology should
involve attempts to falsify the model and
any model that is validated is only useful
until conditions, situations or information
arise that falsify it. Once a model has been
conditionally validated it can then be
implemented, in that its results/output can
be put to use. These steps in model build-
ing are depicted in Fig. 10.4. They are gen-
erally applicable for most model types,
whether they are used to plan research,
experiments or management.
Models and their use in ecological and
agricultural entomology have recently been
reviewed by Holt and Cheke (1997).
Models can be taken forward to develop
computer decision support systems
(Walton, 1998; Section 9.5). Uptake among
farmers has, however, tended to be poor
even though in some cases there have been
clear nancial benets to using the systems
(e.g. Lucey et al., 1997). One of the disad-
vantages of using computer decision sup-
port systems has been the cost and
inconvenience of revising the system and
copying changes onto suitable media and
distributing them to users. The problem
can now be easily overcome through use of
the internet. The advantage of internet
based decision support systems is that only
a single version of the software is imple-
mented on a computer server at any one
time and users have to access the pro-
gramme remotely from their own comput-
ers. Any changes to the software are made
to a single programme and can be imple-
mented quickly and cheaply (Morgan et al.,
Driving Forces and Future Prospects for IPM 333
Fig. 10.4. The methodological steps used in model building (after Vansteenkiste, 1984).
chapter.10 10/7/00 11:33 am Page 333
1998). Such use of information and com-
munication technology and the world wide
web will have a major impact on how
information is accessed, synthesized and
used by all stakeholders in pest manage-
ment in the near future.
Farmers and the general public already
have access via the internet to a wide range
of informed and uninformed opinion,
information and data, relating to pest man-
agement issues. Scientists and vested inter-
est groups will be able to receive a
personalized update of information from a
range of pre-selected sources dealing with
subject matter relevant to their specic
interests. Access to information on matters
relating to food and environmental safety
(e.g. on pesticide residues, GMOs) could
potentially lead to a better informed and
aware general public. In an ideal world this
would contribute to a general public
empowered to make more rational assess-
ments of personal risk. This in turn could
reduce the need for over-protective
regulation by government authorities.
Governments and associated agencies may
benet from an ability to canvas public
opinion either through the internet or
interactive television. The strength of pub-
lic opinion will be gauged by politicians
from results of on-line opinion polls or
television debates, providing a mechanism
for feedback to changes in legislation or
policies. Hence, public opinion will have
an increasingly direct impact on govern-
ment policies and decisions, changing for-
ever the way government works in
developed countries.
10.5 A Question of Scale?
Scale adds an important dimension to pest
management, which can be attempted at
the level of individual farms, across a num-
ber of farms, regions, countries or conti-
nents. It can involve the use of a control
measure used on a small scale by a large
number of farmers or the control measure
can be area-wide in its application or inu-
ence, e.g. classical biological control or
SIT. The scale at which activities are
attempted has important implications for
pest management.
10.5.1 Sustainable use of control measures
The widespread and frequent use of chemi-
cal insecticides of organochlorines,
organophosphates and pyrethroids has
consistently led to the development of
insecticide resistance. The problem is par-
ticularly acute when the product persists
in the environment and hence maintains a
high selection pressure. Resistance has
been slower to develop to Bt, probably due
to its less widespread use and short persis-
tence but resistance has developed (Harris,
1997b). However, increasing sales have led
to resistance in the Diamondback moth
Plutella xylostella on crucifer crops in
South-East Asia (Harris, 1995). The wide-
spread use of most biological or chemical
based products for insect control are poten-
tially at risk if used on a sufciently wide-
spread basis that they cause sufcient
selection pressure. The breakdown of host
plant resistance is a common enough phe-
nomenon where resistant cultivars are
widely planted (Russell, 1978; Johnson and
Gilmore, 1980; Robinson, 1987) and now
with genetically modied crops there are
real concerns that their widespread adop-
tion in cotton, soybean and potato will for
instance quickly lead to the development
of resistance. In the case of transgenic Bt
crops this could also mean the loss of Bt as
a useful control agent as a foliar spray. If
other biopesticides based on fungi, viruses
or nematodes are also used sufciently,
resistance can potentially develop.
Recently, the rst suspected case of selec-
tion of an insect strain capable of over-
coming a crop rotation was reported (Gray
et al., 1996). The insect corn rootworm
(Diabrotica virgifera virgifera) has been
controlled for decades in some parts of the
USA through use of an annual crop rota-
tion of maize with soybean. Severe damage
in maize caused by D. virgifera in 1995 was
investigated and it was discovered that
corn rootworm adults were laying eggs in
soybean elds. The work of Gray et al.
334 Chapter 10
chapter.10 10/7/00 11:33 am Page 334
Driving Forces and Future Prospects for IPM 335
(1996) suggests that growers may have
selected inadvertently for a new strain of
western corn rootworm because of routine
practice of rotating maize with soybean.
Such are the salutary lessons of pest man-
agement.
10.5.2 Levels of integration
In Section 10.4 the four main levels of sys-
tem in agriculture pathosystems, crop-
ping systems, farming systems and
agroecosystems (Rabbinge and de Wit,
1989) were described. The main empha-
sis in insect pest management is on the
pathosystem and to a more limited extent,
the cropping system; this book considers
insect pest management within the context
of IPM. However, insect pest management
is just one component of IPM which may
be conceived of as an interactive system at
three possible levels of interaction (Kogan,
1988):
1. Level I: The integration of control meth-
ods for single species or species complexes
(species/population level integration).
2. Level II: The integration of the impact
of multiple pest categories (insects,
pathogens, weeds) on the crop methods and
their control (community level integration).
3. Level III: The integration of multiple
pest impacts and the methods for their con-
trol within the context of the entire crop-
ping system (ecosystem level of integration).
A more current philosophy of agricultural
production systems classies the different
levels of integration as integrated pest man-
agement, integrated crop management
(ICM) and integrated farming systems (IFS).
These different levels of integration are of
great importance for IPM which is consid-
ered the lowest level of integration. The
signicance of this is that although stake-
holders involved in IPM consider pest
management to be of primary concern and
the need to understand the detail of its
dynamics and economics highly important,
when you start to evaluate problems from a
larger scale at the levels of ICM or IFS, then
pests just become one of a number of pro-
duction constraints that have to be taken
into account, and their management one
other factor that has to be balanced against
a whole range of others competing for
resources and attention by the farmer.
Although a sobering thought for those of us
involved in pest management, the reality of
the situation is that there is a tendency to
address problems in agriculture and devel-
opment on a wider and wider scale, mov-
ing from the pathosystem to the ecosystem.
The implication of such approaches is that
the level of detail and understanding that
is required in order to make pragmatic
decisions (by a farmer) is not that supposed
by researchers attempting to manipulate a
single pest in a single crop. Integrated crop
management is moving towards lower
inputs and a return to use of cultural
control methods that remove the major
constraints to production. With such
approaches the signicance of individual
pest problems is reduced. If the farmer
deals macro level problems by manipulat-
ing the crop/farm environment it is
arguable that detailed understanding of
each pest and its control is unnecessary.
This in turn calls into question the value of
and need for detailed research at the
pest/crop level. With governments keen to
cut back on public spending such justica-
tion could be used to reduce research on
IPM related topics.
10.6 Technological Advances and
Commerce
In Section 10.3 the role of paradigms both
as a process by which science advances and
at the same time is constrained, was dis-
cussed. Overlaying this process are the con-
straints to progress presented by the
limitations of particular methodologies
(Dent, 1997b; Walton and Dent, 1997).
Areas of potential advancement open up
when new methodologies are developed
which make possible previously impossible
or difcult experiments. Walton and Dent
(1997) described this as a vertical leap in
capability and contrasted it with a horizon-
tal expansion in capability, the process by
chapter.10 10/7/00 11:33 am Page 335
which the vertical leap in methodology is
more widely exploited and used across a
wide range of conditions and circum-
stances. The vertical leap in capability is a
relatively rare event in science, but its
impact can be substantial, creating whole
new possibilities in technology or know-
how. Take for instance, the discovery of
Polymerase Chain Reaction (PCR). The
process of PCR and its associated enzyme
DNA polymerase were named by Science as
the 1989 Molecule of the Year due to its
likely effect on future science. The Nobel
Prize for Chemistry was also awarded to the
inventor of the PCR process in 1993
(Symondson and Hemmingway, 1997). The
technique has made possible DNA diagnos-
tics for insecticide resistance (Hemingway
et al., 1995), the study of insect taxonomy
and insect population genetics (Symondson
and Hemingway, 1997). Instrumental to this
is rapid amplication of polymorphic DNA
(RAPD) which was rst reported in 1990
(Welsh and McClelland, 1990) a simple
technique for amplifying non-specic frag-
ments of genomic DNA for which no
sequence is available. RAPDs have been
used to investigate taxonomic differences
between aphid species (Cenis et al., 1993;
Robinson et al., 1993) as well as clonal vari-
ation within a single species (Black et al.,
1992; Puterka et al., 1993). Such DNA and
biochemical advances will eventually result
in litmus paper, pregnancy testing type
kits that can be used in the eld to identify
insect pest species, and insecticide resistant
insect populations, including those resis-
tant to Bt transgenic crops. In addition they
will be used as indicators to test for the
presence of insecticide residues or the pres-
ence of proteins produced in transgenic
crop plants. Such technologies will con-
tinue to revolutionize pest management and
the ability of consumers and retailers to
make decisions about food and its origins
prior to purchase. Traceability of food prod-
ucts through the availability of such tech-
nologies is likely to have a major impact on
the future use of and markets for chemical
insecticides (Dent and Waage, 1999).
The advances that have been made in
developing transgenic crops with resis-
tance to insect pests expressing toxins from
Bt (rst successfully reported in 1987;
Vaeck et al., 1987), inhibitors of proteases
and amylases, lectins and enzymes such as
chitinases and lipoxygenases (Gatehouse et
al., 1998) are increasingly either available
for farmers to plant or are likely to be so
within the next few years. Inevitably the
development of transgenic biocontrol
agents such as viruses, bacteria and fungi
are also likely in the future (Winstanley et
al., 1998) having enhanced host range
and speed of kill, storage and persistence.
Each of these technological advances
provide potential new products for
agribusiness to commercialize, market and
sell. The pest management agribusiness has
been built on pest control agents/technolo-
gies particularly chemical pesticides and
today these and transgenic crops represent
the largest share of the business. However,
the structure of the industry has changed
since the late 1960s when, driven by IPM,
new and different pest control technologies
were sought, e.g. semiochemicals and
biopesticides, which over the years have
spawned a multitude of smaller companies
specializing in different aspects of pest
management. Today there are companies
that specialize in pheromone monitoring
and mating disruption, target systems, bar-
riers and mulches, decision support soft-
ware, as well as production and sale of
predators, parasitoids and biopesticides
based on fungi, entomopathogenic nema-
todes, bacteria and viruses. In addition to
these are the support industries providing
packaging, adjuvants, sprayers, inert carri-
ers, diagnostic systems, tracers and meteo-
rological equipment.
Pest management has also produced a
wide range of service industries including
consultants dispensing advice, indepen-
dent providers of toxicological, ecotoxico-
logical and registration support, as well as
contract research and product develop-
ment. The pest management business is a
multinational, multi-billion dollar industry
that provides employment, wealth, taxes
and by most accounts contributes to agri-
336 Chapter 10
chapter.10 10/7/00 11:33 am Page 336
cultural production. However, the signs are
that the pest management aspect of
agribusiness could be in decline. A number
of multinational agrochemical companies
are retrenching, reducing their chemical
pesticide product portfolios, diversifying
into seed companies and transgenic crops
and in addition there is growing evidence
in some cropping systems, e.g. rice and cot-
ton, that pest control inputs (particularly
chemical pesticides) are not necessary for
sustainable crop production. It is unlikely
that the pest management agribusiness is in
terminal decline, rather that the major
players (the multinational companies) fore-
see the prospect of lower returns and
smaller markets. This is a process driven
by farmers responding to the needs of
consumers who are increasingly discrimi-
nating in choice of food products that are
considered safe. The result will be an
increasingly diverse industry with fewer
but safer chemicals available, comple-
mented by a larger number of pest manage-
ment products manufactured by small,
exible and specialist pest management
companies meeting more local pest man-
agement product needs. Given this, how-
ever, does not imply that the industry as a
whole will be any less important in wealth
and employment generation, just that there
will be a shift in where and how the wealth
and employment is generated.
10.7 Politics, the Public and
the Environment
The policies of governments can have a sig-
nicant effect on insect pest management
in a number of different ways. They can
affect the availability of funds for research
and extension, or the pricing of products
and the availability of subsidies, its imple-
mentation and adoption. The overall phi-
losophy of IPM will also only continue to
gain political credence if the climate of
public opinion is appropriate to allow this
to occur.
There are a number of factors that make
IPM more politically attractive now than at
any previous time. These factors are
mainly relevant to the economically devel-
oped nations of Europe and USA although,
if anything, these countries have until rela-
tively recently been the bastions of pest
control dominated by the use of chemical
pesticides. The reduced pressure on arable
land (due to surpluses) and greater public
concern for the environment have been the
main driving forces for this change. In
Europe enormous stockpiles of grain, meat
and dairy products have prompted changes
to reduce over-production. The growing
public concern about the misuse of pesti-
cides and the general interest in a cleaner,
safer environment have pushed the politi-
cians towards an acceptance that environ-
mental issues will inuence the way
people vote. The factors that inuence
votes in a democratically run government
will subsequently inuence policy and
thus, the evolution of green politics, a
political force for environmental issues.
IPM, a philosophy of pest management that
seeks to reduce the use of harmful chemi-
cal pesticides and to promote the integra-
tion of natural or environmentally friendly
control methods, is uniquely suited to the
new green era. IPM and green politics are
well matched.
Public opinion is now a powerful force
for change in agriculture and is hence
being taken seriously by governments.
However, because public opinion is never
homogeneous, it is not always easy to be
sure exactly who is represented when pub-
lic opinion is quoted. Pressure groups
often appear to represent public opinion
but it may be dangerous to assume they do
so, especially if they hold extreme views
(Spedding, 1998), or have vested political
interests or social engineering at heart
(Hillman, 1998). The media plays a major
part in the publics perception of scientic
issues, for instance the use of transgenic
crops. Since the media is arts dominated,
and all too often artistic licence embell-
ishes scientic observation with a view to
making the news rather than just reporting
it, the presentation of the issues is rarely
properly dealt with. Given this, however,
Driving Forces and Future Prospects for IPM 337
chapter.10 10/7/00 11:33 am Page 337
public perceptions are a reality even when
they are ill-founded and erroneous, and
can have sufcient inuence to affect gov-
ernment policy as well as demand for agri-
cultural products (Spedding, 1998).
The public perceive risks differently
from experts. Scientists and regulators
focus on measurable, quantiable attributes
of risk whereas the public as consumers
emphasize more qualitative, value laden
attributes of risk such as fairness and con-
trollability which experts tend to ignore
(Groth, 1991). Risk perception by the pub-
lic strongly depends on whether the risk is
involuntary; out of an individuals control,
whether it is inequitably distributed and
whether or not it has the potential for cata-
strophic consequences (Slovic, 1987). The
more that risk falls into these categories the
higher the perceived risk, hence the pres-
sure for the management and reduction of
this perhaps through government regula-
tions (Luijk et al., 1998). In the UK, the
BSE situation has damaged public con-
dence in governments ability to under-
stand and manage risk to the extent that
new approaches to policy making are
urgently needed (Knig, 1998).
Part of the problem faced by govern-
ments is that there is generally a poor
knowledge, standard of education and
understanding of the science behind the
issues that are perceived as problems by
the public. Often the public have a rather
vague notion of what is at issue and such
notions may be driven by generally held
beliefs and truisms such as a need for the
balance of nature between species or
humans need to live in harmony with
nature. Even perceptions of what is meant
by the environment can be very vague. All
of which may be used to justify arguments
or support whatever action a particular
group advocates. Sweeping generalizations
about systems and methods may be invalid
and do not help debate at all (Spedding,
1996, 1998).
Whereas in the past the concerns of the
public in relation to pest management have
been associated with chemical pesticide
use, the present major subject of debate is
the use of transgenic crops and the poten-
tial negative impact they could have on
the environment and our food. In contrast
to healthcare the application of biotechnol-
ogy to food and the environment has
tended to be greatly inuenced by the level
of education, perceived social and ethical
issues as well as reaction and frequent irra-
tional responses towards non-medical sci-
ences (Hillman, 1998). None the less a
balance point has to be reached, taking into
account illogical fears, genuine damage to
the environment, healthcare and the need
for science. To this end governments will
need to ensure greater public disclosure
(product labelling) and tighter regulation
(encompassing more systematic research
and evaluation of risk and hazard before
and after release). In fact such require-
ments are more or less becoming politically
inescapable, at least in Europe. Thus, gov-
ernments and their policies will continue
to have a major impact on IPM. In develop-
ing countries governments are the single
most important inuence, because of their
policies which can affect availability and
regulation of biocontrol agents, subsidies to
pesticides and other control measures, but
also because governments are usually the
single most important investor, employer
and controller of resources.
Governments can control the availabil-
ity of insecticides through the provision of
tax exemptions and reductions, low cost
credit or subsidized prices for the purchase
of both sprayers and chemicals. Hence,
farmers are encouraged to purchase and
use insecticides because they are inexpen-
sive. By reducing the cost of insecticides
governments hope to increase crop produc-
tion either for home use or to generate rev-
enue from exporting the products from
cash crops. The level of subsidy as a per-
centage of the retail price of the pesticide is
usually high, for instance 89% in Senegal,
83% in Egypt, 87% in Ghana, 44% in
Colombia (Bifani, 1986) and between 50
and 75% in Pakistan (Ahmad, 1987). These
subsidies cost the governments a substan-
tial amount, especially as most of the pesti-
cides consumed in developing countries
338 Chapter 10
chapter.10 10/7/00 11:33 am Page 338
are imported. Such subsidies are bound to
encourage pesticide use (van Emden and
Peakall, 1996), in Indonesia the consump-
tion of subsidized pesticides grew from
5100 tonnes in 1978 to 15,100 tonnes in
1982 (Bifani, 1986).
Credit facilities may also be extended to
help farmers purchase spray equipment or
insecticides. The credit may be obtained
from banks, merchants or government sup-
ported agricultural co-operatives and the
security for the loan will often have to be
the productive capacity of the crop, if the
farmers have few other assets. Hence, the
lender receives both the return on the capi-
tal and interest from the proceeds of the
harvested crop. There are disadvantages to
some credit schemes, other than the obvi-
ous problems with defaulting. Some agri-
cultural credit programmes involve
packages of inputs, so that a prescribed
cocktail of seeds and pesticides must be
purchased at the time the load is drawn
(Goodell, 1984). In doing this farmers may
gain by taking advantage of special low
interest rates, but they may also lose out by
purchasing pesticides they may not need at
higher than open market prices. Such pack-
ages preclude farmer experimentation and
discourage use of other forms of control, a
situation contrary to that required for the
adoption of IPM.
The control of resources and the poli-
cies for their allocation provides govern-
ments with the capability to promote IPM
within a country. Governments create and
control the institutions important to IPM
such as national agricultural research sta-
tions, extension services, regulatory agen-
cies and have the ability to establish
mechanisms for coordinating the activities
of the complex of government, non-govern-
ments (NGOs, private sector) and interna-
tional organizations that are required to
provide IPM in a relevant form for the
farmers. Governments also need to estab-
lish appropriate mechanisms to engage a
broader range of people than those in the
usual circles of scientic and ofcial advi-
sors in risk management. Only in this way
will they regain public condence in the
process of decision making regarding use
of novel technologies for pest management
(Knig, 1998). The public and their con-
cerns about food and the environment will
continue to be a major driving force in agri-
culture. It will be through developing
better partnerships between all relevant
parties, coordinated and led by government
that IPM can remain at the forefront of this
process thereby alleviating unwarranted
concerns and reducing harm to the envi-
ronment.
10.8 Conclusion
The driving forces in pest management are
clearly many and varied. The future
prospects of IPM will be inuenced by
each to differing degrees and it is difcult
to predict the extent to which any one
will predominate. However, in bringing
together the elements of pest management,
its history, the control options, the princi-
ples and information that relate so much to
what is researched and implemented, it is
important that the future prospects of IPM
are properly considered. At risk, of course,
is the fact that in time everything written
in this section may prove totally incorrect.
In making this attempt the context in
which pest management is given real
meaning needs to be outlined the prob-
lem of pest management in meeting the
needs of the worlds population for a sus-
tainable food supply. It is within this con-
text that the important future trends in pest
management can then be addressed.
10.8.1 The problem
The problem starts with population life
span has surged this century from an aver-
age 39 years to 65 years and between 1950
and 1990 2.8 billion people were added
to the world population (Nelson-Smith,
1998). Modern medicine and increased
food availability has lowered the worlds
death rates which has produced a one-off
population growth surge (Avery, 1998). In
addition, fertility rates tend to reduce with
increased food security. Births per woman
Driving Forces and Future Prospects for IPM 339
chapter.10 10/7/00 11:33 am Page 339
in developing countries have already fallen
from 6.1 births in 1965 to 3.1 at this time.
The long term population equilibrium for
afuent, urban societies seems to be 1.7
births per woman. As a result, demo-
graphic trends now indicate a peak world
human population of approximately 8.5
billion people that will be reached around
2035 (Seckler and Cox, 1994).
Obtaining world food security is a com-
plex and difcult task depending on many
interrelated factors encompassing political,
social and technical agendas (Ives et al.,
1998). Agricultural research and develop-
ment has over the last 30 years met the
needs for improving agricultural produc-
tion sufcient to barely meet requirements
for feeding the worlds growing population.
This has largely been achieved through use
of fertilizers, chemical pesticides and plant
breeding. It is anticipated that further agri-
cultural research and development will be
able to meet the challenge to provide the
required levels of food to meet continued
population growth at least up to a level
where the world population stabilizes
around 2035.
Worldwide agricultural production faces
many constraints, one of which are the
losses to yield caused by pest damage. This
is commonly quoted to be around 2040%
yield loss (e.g. Walgate, 1990). Improved
levels of pest management obviously pro-
vides one of a number of options for
addressing the problem of world food
shortages. It is in this context that the
future of insect pest management ulti-
mately needs to be viewed.
10.8.2 A framework for the future
The simplest and most concise means of
presenting a framework for the future of
pest management is to make a number of
unsubstantiated statements. The arguments
for these are largely to be found or can be
inferred from the main body of the book.
1. There will be a number of inuential
paradigms that will both guide and con-
strain the development of pest manage-
ment. These will be: (i) the need to obtain
sustainability in agriculture and by impli-
cation sustainable pest management; (ii)
biotechnology; and (iii) pressure for scien-
tists to commercially exploit the intellec-
tual property generated by their research.
2. The panacea for agriculture will be
transgenic crops even though ultimately
such approaches will be acknowledged as
ecologically unsustainable for pest manage-
ment. Despite concerns among pressure
groups and the general public transgenic
crop products will become more widely
available but diagnostic techniques will
enable consumers to differentiate and make
informed choices about GM food products.
3. There will be a proliferation of smaller
agribusiness companies as the multination-
als reduce product ranges of chemical pes-
ticides to meet only major markets and
concentrate on biotechnology. The smaller
niche markets will be exploited by more
specialized companies meeting local and
regionally based markets. There will be a
continued diversication of IPM products.
4. There will be increasing nancial pres-
sure to manage public sector research and
development more cost effectively, leading
to greater collaboration and accountability.
Also decision-makers will be pressured to
understand and account for the scientic
process as well as its outputs. More empha-
sis will thus be placed on generating
income from research outputs (materials,
devices and know how) which will
inevitably mean greater effort directed
towards pest management products rather
than techniques. Reinvestment of income
derived from sale of pest management
products into the institutes and universi-
ties that generated them will allow public
nances to fund public good research
such as pest management techniques.
5. The environment will increasingly be
seen as a social issue. Information sources
will expand and diversify, improving
understanding and education of the general
public which could balance the likelihood
of the need for a more stringent regulatory
environment. The ability for mass audi-
ences to vote on major issues through tele-
vision or the internet will signicantly
340 Chapter 10
chapter.10 10/7/00 11:33 am Page 340
affect the way in which governments
develop policy and evaluate perception of
risk associated with new technologies.
6. Frameworks to promote international
public/private sector collaboration will be
established to better coordinate and iden-
tify the most effective means of promoting
sustainable agriculture for major crop com-
modities on a global scale.
10.8.3 And nally
IPM has had a signicant impact on the
way pest control is viewed, studied and
practised. From being just a concept in the
early 1960s it has become a political and
social force for the beginning of the new
millennium. The philosophy and practice
of IPM will continue to change and
develop. It will remain dynamic simply
because of its diverse nature and the range
of individuals, disciplines and organiza-
tions involved in its study, development
and implementation. Whether IPM can
meet the real challenges that lie ahead with
practical and sustainable solutions remains
to be seen, but it is likely that, because it
always achieves or partly achieves its aims,
IPM will continue as a valuable means of
addressing pest management problems for
many years hence.
Driving Forces and Future Prospects for IPM 341
chapter.10 10/7/00 11:33 am Page 341
ABrook, J. (1964) The effect of planting date and spacing on the incidence of groundnut rosette dis-
ease and of the vector, Aphis craccivora Koch, at Mokwa, Northern Nigeria. Annals of Applied
Biology 54, 199208.
ABrook, J. (1968) The effect of plant spacing on the numbers of aphids trapped over the groundnut
crop. Annals of Applied Biology 61, 298294.
Acock, B., Reddy, V.R., Whisler, F.D., McKinion, J.M., Hodges, H.F. and Boote, K.J. (1983) The soybean
crop simulator, GLYCIM: model documentation 1982. 002 in the series Response of vegetation to
carbon dioxide. US Department of Energy and US Department of Agriculture, pp. 1827.
Acreman, T.M. and Dixon, A.F.G. (1986) The role of awns in the resistance of cereals to the grain
aphid, Sitobion avenae. Annals of Applied Biology 109, 375381.
Adams, A.J. and Hall, F.R. (1989) Inuence of bifenthrin spray deposit quality on the mortality of
Trichoplasis ni (Lepidoptera: Noctuidae) on cabbage. Crop Protection 8, 206211.
Adams, A.J. and Hall, F.R. (1990) Initial behavioural responses of Aphis gossypii to dened deposits
of bifenthrin on chrysanthemum. Crop Protection 9, 3943.
Adams, J.M. and Schulten, G.G.M. (1976) Losses caused by insects, mites and microorganisms. In:
Harris, K.L. and Lublad, C.J. (eds) Postharvest Grain Loss Assessment Methods, Meeting of the
American Association of Cereal Chemists 1976, 810 September 1976, Slough. The League for
International Food Education, The Tropical Products Institute (England), Food and Agriculture
Organisation, UN, pp. 8393.
Adams, M.E. (1982) Agricultural Extension in Developing Countries. Longman Scientic & Technical,
London.
ADAS (1976) The utilisation and performance of eld crop sprayers. Farm Mechanisation Studies
No. 29. Ministry of Agriculture, Fisheries and Food, pp. 32.
Agarwal, R.A. (1969) Morphological characteristics of sugarcane and insect resistance. Entomologia
Experimentalis et Applicata 12, 767776.
Ahmad, M. (1987) Marketing pesticides in Pakistan in relation to legal and other controls. In: Tait, J.
and Napompeth, B. (eds) Management of Pests and Pesticides, Farmers Perceptions and
Practices. Westview Press, Boulder and London, pp. 7985.
Aldridge, C.A. and Hart, A.D.M. (1993) Validation of the EPPO/CoE risk assessment scheme for hon-
eybees. In: Proceedings of the Fifth International Symposium on the Hazards of Pesticides to
Bees, 2628 October 1993. Plant Protection Service, Wageningen, pp. 3741.
Alford, D.V., Carden, P.W., Dennis, E.B., Gould, H.J. and Vernon, J.D.R. (1979) Monitoring codling
and tortix moths in United Kingdom apple orchards using pheromone traps. Annals of Applied
Biology 91, 165178.
Allard, R.W. (1960) Principles of Plant Breeding. John Wiley & Sons, New York and London.
Allen, J.C. (1976) A modied sine wave method for calculating degree days. Environmental
Entomology 5, 388396.
Allen, J.C. (1981) The citrus rust mite game: a simulation model of pest losses. Environmental
Entomology 10, 171176.
References
342
Insect Refs 11/7/00 9:29 am Page 342
Allen, W.A. and Rajotte, E.G. (1990) The changing role of extension entomology in the IPM era.
Annual Review of Entomology 35, 379397.
Allsopp, P.G. (1981) Development, longevity and fecundity of the false wireworms Pterohelaeus dar-
lingensis and P. alternatus I. Effects of constant temperatures. Australian Journal of Zoology 29,
605619.
Allsopp, P.G. (1994) An articial diet suitable for testing antimetabolic products against sugarcane white-
grubs (Coleoptera: Scarabaeidae). Journal of the Australian Entomological Society 34, 135137.
Allsopp, P.G. and McGhie, T.K. (1996) Snowdrop and wheatgerm lectins and avidin as antimetabo-
lites for the control of sugarcane whitegrubs. Entomologia Experimentalis et Applicata 80,
409414.
Allsopp, P.G., Daglish, G.J., Taylor, M.F.J. and Gregg, P.C. (1991) Measuring development of Heliothis
species. In: Zalucki, M.P. (ed.) Heliothis: Research Methods and Prospects. Springer-Verlag,
Berlin, pp. 90108.
Almeida, A.M.R., Corso, I.C. and Machado, N.F. (1988) Estudos epidemiologicos com o virus da
queima-do-broto da soja. Resultados de Pesquisa de Soja, 198788. EMBRAPA/CNP Soja,
Londrina, Brazil.
Amatobi, C.I., Apeji, S.A. and Oyidi, O. (1988) Effects of farming practices on populations of two
grasshopper pests (Kraussaria angulifra Krauss and Oedaleus senegalensis Krauss (Orthoptera:
Acrididae)) in Northern Nigeria. Tropical Pest Management 34, 173179.
Anderson, R.G. (1961) The inheritance of leaf rust resistance in seven varieties of common wheat.
Canadian Journal of Plant Science 41, 342.
Andow, D.A. (1991) Vegetational diversity and arthropod population response. Annual Review of
Entomology 36, 561586.
Andow, D.A. (1992) Fate of eggs of rst generation Ostrinia nubilalis (Lepidoptera: Pyralidae) in
three conservation tillage systems. Environmental Entomology 21, 388393.
Andrewartha, H.G. and Birch, L.C. (1954) The Distribution and Abundance of Animals. University of
Chicago Press, Chicago.
Andrews, D.J. and Kassam, A.H. (1976) Importance of multiple cropping in increasing world food
supplies. In: Papendick, R.I., Sanchez, P.A. and Triplet, G.B. (eds) Multiple Cropping. American
Society of Agronomy Special Publication No. 27, pp. 110.
Andrews, K.L., Bentley, J.W. and Cave, R.D. (1992) Enhancing biological controls contributions to
integrated pest management through appropriate levels of farmer participation. Florida
Entomologist 75, 429439.
Annan, I.B., Schaefers, G.A. and Tingey, W.M. (1996) Impact of density of Aphis craccivora
(Aphididae) on growth and yield of susceptible and resistant cowpea cultivars. Annals of
Applied Biology 128, 185193.
Anon (1976) Control of insects affecting livestock. USDA Agricultural Research Service Natural
Research Program. No. 2048.
Anon (1993) Reference Volume of the Agrochemical Service. Wood Mackenzie, May 1993.
Anon (1997) Bt com: seed supplies in the USA. Agricultural Chemical News 15 Nov. 1997, 218, 5.
Anon (1999) Farmer Participatory Cotton IPM Source Book. CABI Bioscience Technical Support
Group to the Global IPM Facility, Swiss Agency for Development and Co-operation.
APO (Asian Productivity Organisation) (1993) Pest Control in Asia and the Pacic. APO, Tokyo.
Appleyard, W.T., Williams, J.T. and Davie, R. (1984) Evaluation of three synthetic pyrethroids in the
control of sheep heady disease. Veterinary Record 114, 214215.
Arbogast, R.T. (1979) The biology and impact of the predatory bug Xylocoris avipes. Proceedings of
the 2nd International Working Conference on Stored Product Entomology, Ibadan, Nigeria,
1016 September 1978. Savannah, Georgia, pp. 91105.
Artigues, M., Avilla, J., Sarasua, M.J. and Albajes, R. (1992) Egg laying and host stage preference at
constant temperatures in Encarsia tricolor. Entomphaga 37, 4553.
Ashby, J.W. (1974) A study of arthropod predation of Pieris rapae L. using serological and exclusion
techniques. Journal of Applied Ecology 11, 419425.
Asher, M.J.C. and Dewar, A.M. (1994) Control of pests and diseases in sugar beet by seed treatments.
British Crop Protection Council Monograph No. 57. Seed Treatment: Progress and Prospects.
British Crop Protection Council, Farnham, UK, pp. 151158.
Askew, R.R. (1971) Parasitic Insects. Heinemann Educational Books Limited, London.
References 343
Insect Refs 11/7/00 9:29 am Page 343
Atlegrim, O. (1989) Exclusion of birds from bilberry stands: impact on insect larval density and
damage to the bilberry. Oecologia 79, 136139.
Audemard, H. (1971) Crop loss assessment in Malus and Pyrus spp. of damage caused by Zeuzera
pyrina. No. 38 Crop Loss Assessment Methods. FAO Manual on the Evaluation and Prevention
of Losses by Pests, Disease and Weeds.
Aveling, C. (1977) The biology of Anthocorids (Heterophera: Anthocoridae) and their role in the inte-
grated control of the damson-hop aphid (Phorodon humili Schrank). PhD Thesis, University of
London.
Aveling, C. (1981) Action of mephosfolan on anthocorid predators of Phorodon humuli. Annals of
Applied Biology 97, 155164.
Avery, D. (1998) 1997 Saving the planet with pesticides, biotechnology and European farm reform.
In: Lewis, T. (ed.) The Bawden Memorial Lectures. British Crop Protection Council, Farnham,
UK, pp. 309323.
Axtell, R.C. and Arends, J.J. (1990) Ecology and management of arthropod pests of poultry. Are 35,
101126.
Bach, C.E. (1980) Effects of plant diversity and time of colonisation on an herbivore-plant interac-
tion. Oecologia 44, 319326.
Bailey, J.C. (1986) Infesting cotton with tarnished plant bug (Heteroptera: Miridae) nymphs reared by
improved laboratory rearing methods. Journal of Economic Entomology 79, 14101412.
Bailey, N.T.J. (1981) Statistical Methods in Biology, 2nd edn. Hodder and Stoughton, London, UK.
Baker, D.N., Lambert, J.R. and McKinion, J.M. (1983) GOSSYM: a simulator of cotton growth and
yield. South Carolina Agricultural Experiment Station Technical Bulletin No. 1089.
Baker, P.B., Shelton, A.M. and Andaloro, J.T. (1982) Monitoring of diamondback moth (lepidoptera:
yponomeutidae) in cabbage with pheromones. Journal of Economic Entomology 75, 10251028.
Baker, R.H.A. (1994) The potential for geographical information systems in analysing the risk posed
by exotic pests. Brighton Crop Protection Conference: Pests and Diseases Volume 1. British Crop
Protection Council, Farnham, UK, pp. 159165.
Bakke, A., Sether, T. and Kvamme, T. (1983) Mass-trapping of the spruce bark beetle Ips typographus:
Pheromone and trap technology. Meddelelser fra Norsk Institut for Skogforskning 38, 135.
Baldwin, B. (1986) Commercialisation of microbially produced pesticides. The World Biotech Report
1986: Proceedings of Biotech 86 Volume 1, Applied Biotechnology. Online Publications,
London, New York, pp. 3949.
Baliddawa, C.W. (1985) Plant species diversity and crop pest control: an analytical review. Insect
Science Applications 6, 479487.
Barcelo, P. and Lazzeri, P.A. (1998) Direct gene transfer: chemical, electrical and physical methods.
In: Lindsey, K. (ed.) Transgenic Plant Research. Harwood Academic, Amsterdam, pp. 3556.
Bardner, R. and Fletcher, K.E. (1974) Insect infestations and their effects on the growth and yield of
eld crops: a review. Bulletin of Entomological Research 64, 141160.
Bardner, R., Fletcher, K.E. and Stevenson, J.H. (1978) Pre-owering and post-owering insecticide
applications to control Aphis fabae on eld beans: their biological and economic effectiveness.
Annals of Applied Biology 88, 265271.
Bareld, C.S., Cardelli, D.J. and Boggess, W.G. (1987) Major problems with evaluating multiple stress
factors in agriculture. Tropical Pest Management 33, 109118.
Barker, K. (1994) Management of collaboration in ECR & D projects. In: Management of Collaborative
European Programmes and Projects in Research, Education and Training. University of Oxford,
Oxford, UK.
Barlow, C.A. (1961) On the biology and reproductive capacity of Syrphus corollae in the laboratory.
Entomologia Experimentalis et Applicata 4, 91100.
Barlow, F. (1985) Chemistry and formulation. In: Haskell, P.T. (ed.) Pesticide Application: Principles
and Practice. Clarendon Press, Oxford, UK, pp. 134.
Barnard, D.R. (1985) Injury thresholds and production loss functions for the lone star tick,
Amblyomma americanum (Acari: Ixodidae) on pastured, preweaner beef cattle, Bos taurus.
Journal of Economic Entomology 78, 852855.
Barnard, D.R., Ervin, R.T. and Epplin, F.M. (1986) Production system-based model for dening eco-
nomic thresholds in pre-weaner beef cattle, Bos taurus, infested with the lone star tick,
Amblyomma americanum (Acari: Ixodidae). Journal of Economic Entomology 79, 141143.
344 References
Insect Refs 11/7/00 9:29 am Page 344
Barnes, D.K., Ratcliffe, R.H. and Hanson, C.H. (1969) Interrelationship of three laboratory screening
procedures for breeding alfalfa resistant to the alfalfa weevil. Crop Science 9, 7779.
Barnes, J.M. (1976) Hazards to people. In: Gunn, D.L. and Stevens, J.G.R. (eds) Pesticides and Human
Welfare. Oxford University Press, pp. 181192.
Barnes, M.M., Millar, J.G., Kirsch, P.A. and Hawks, D.C. (1992) Codling moth (Lepidoptera:
Tortricidae) control by dissemination of synthetic female sex pheromone. Journal of Economic
Entomology 85, 12741277.
Barnett, E.A. and Fletcher, M.R. (1998) The poisoning of animals from the negligent use of pesticides.
The 1998 Brighton Conference: Pests and Diseases Volume 1. British Crop Protection Council,
Farnham, UK, pp. 279284.
Barrett, J.A. (1983) Exploitation and conservation of germplasm for crop protection. In: Plant
Protection for Human Welfare, Proceedings of the 10th International Congress of Plant
Protection 1983, Brighton Volume 1, pp. 820827.
Bartlett, P.W. and Murray, A.W.A. (1986) Modelling adult survival in the laboratory of diapause and
non-diapause Colorado beetle Leptinotarsa decemlineata (Coleoptera: Chrysomelidae) from
Normandy, France. Annals of Applied Biology 108, 487501.
Bateman, R. (1999) Delivery systems and protocols for biopesticides. In: Hall, F.R. and Menn, J.J.
(eds) Methods in Biotechnology, Volume 5: Biopesticides: Use and Delivery. Humana Press,
Totowa, New Jersey, USA, pp. 509528.
Bathan, H. and Glas, M. (1982) The distribution of the cereal leaf roller, Cnephasia pumicana Zell.
(Lepidoptera: Tortricidae) in the German Federal Republic. First results of a pheromone trap sur-
vey in 1982. Nachrichtenblatt des Deutschen Panzenschutzdienstes 35, 8186.
Baumgaertner, J. and Zahner, P. (1984) Simulation experiments with stochastic population models as
a tool to explore pest management strategies in an apple-tree mite system (Panonychus ulmi
Koch, Tetranychus urticae Koch). In: Cavalloro, R. (ed.) Statistical and Mathematical Methods in
Population Dynamics. A.A. Balkema, Rotterdam and Boston, pp. 166178.
Beal, G.M. and Sibley, D.N. (1967) Adoption of agricultural technology by the Indians of Guatemala.
Rural Society Report No. 62. Department of Sociology and Anthropology, Iowa State University,
Ames, Iowa, USA.
Beck, S.D. (1965) Resistance of plants to insects. Annual Review of Entomology 10, 207232.
Beckman, J.S. and Soller, J. (1983) Restriction fragment length polymorphisms in genetic improve-
ment: methodologies, mapping and costs. Theoretical and Applied Genetics 67, 3543.
Beddington, J.R., Free, C.A. and Lawton, J.H. (1975) Dynamic complexity in predator-prey models
framed in difference equations. Nature 225, 5860.
Beddington, J.R., Free, C.A. and Lawton, J.H. (1978) Characteristics of successful natural enemies in
models of biological control of insect pests. Nature 273, 513519.
Beeden, P. (1972) The pegboard an aid to cotton pest scouting. Pans 18, 4345.
Begon, M. and Mortimer, M. (1981) Population Ecology. Blackwell Scientic Publications, Oxford,
UK.
Beirne, B.P. (1975) Biological control attempts by introductions against pest insects in the eld in
Canada. Canadian Entomologist 107, 225236.
Bell, M.R. and Hayes, J.L. (1994) Areawide management of cotton bollworm and tobacco budworm
(Lepidoptera: Noctuidae) through application of a nuclear polyhedrosis virus on early-season
alternate hosts. Journal of Economic Entomology 87, 5357.
Bellman, R.E. (1957) Dynamic Programming. Princeton University Press, Princeton, New Jersey,
USA.
Bellotti, A. and Kawano, K. (1980) Breeding approaches in cassava. In: Maxwell, F.G. and Jennings,
P.R. (eds) Breeding Plants Resistant to Insects. John Wiley & Sons, Chichester, Brisbane and
Toronto, pp. 313316.
Bellows, T.S. Jr., van Driesche, R.G. and Elkinton, J.S. (1989) Extensions to Southwood and Jepsons
graphical method of estimating numbers entering a stage for calculating mortality due to para-
sitism. Researches on Population Ecology 31, 169184.
Ben Saad, A.A. and Bishop, G.W. (1976) Effect of articial honeydews on insect communities in
potato elds. Environmental Entomology 5, 453457.
Benbrook, c. M., Groth, E., Halloran, J.M. and Hansen, M.K. (1996) Pest Management at the
Crossroads. Consumer Union, Yonkers, New York, USA.
References 345
Insect Refs 11/7/00 9:29 am Page 345
Bence, J.R. (1988) Indirect effects and biological control of mosquitoes by mosquito sh. Journal of
Applied Ecology 25, 505521.
Benedict, M.R. (1953) Farm Policies of the United States 17901950. Twentieth Century Fund, New
York.
Bennet, S.R., McClelland, G.A.H. and Smilanick, J.M. (1981) A versatile system of uorescent marks
for studies of large populations of mosquitoes (Diptera: Culicidae). Journal of Medical
Entomology 18, 173174.
Bennett, F.D. and Yaseen, M. (1980) Investigations on the natural enemies of cassava mealybug
(Phenacoccus spp.) in the Neotropics. Unpublished Report. International Institute for Biological
Control, Ascot, UK.
Bennett, J., Cohen, M.B., Katiyar, S.K., Ghareyazie, B. and Khush, G.S. (1997) In: Carozzi, N. and
Koziel, M. (eds) Advances in Insect Control: the Role of Transgenic Plants. Taylor and Francis,
London, pp. 7593.
Benschoter, C.A. (1984) Low-temperature storage as a quarantine treatment for the Caribbean fruit y
(Diptera: Tephritidae) in Florida citrus. Journal of Economic Entomology 77, 12331235.
Benson, J.F. (1973) Population dynamics of cabbage root y in Canada and England. Journal of
Applied Ecology 10, 437446.
Bentley, B.R. and Clements, R.O. (1989) Impact of time of sowing on pest damage to direct-drilled
grass and the mode of attack by dipterous stem borers. Crop Protection 8, 5562.
Benz, G. (1987) Integrated pest management in material protection, storage, and food industry. In:
Delucchi, V. (ed.) Integrated Pest Management, Protection Integre: Quo Vadis? An International
Perspective. Parasitis 86, Geneva, pp. 3169.
Bergman, M.K. and Turpin, F.T. (1984) Impact of corn planting date on the population dynamics of
corn rootworms (Coleoptera: Chrysomelidae). Environmental Entomology 13, 898901.
Bernays, E.A., Chapman, R.F. and Woodhead, S. (1983) Behaviour of newly hatched larvae of Chilo
partellus (Swinhoe) (Lepidoptera: Pyralidae) associated with their establishment in host-plant,
sorghum. Bulletin of Entomological Research 73, 7583.
Berry, C. (1994) Conversion of hazard to risk: a high-cost mistake. Eighth International Congress of
Pesticide Chemistry Proceedings, USA.
Berry, N.A., Wratten, S.D. and Frampton, C. (1995) The role of predation in carrot rust y (Psila
rosae) egg loss. Proceedings of the 48th New Zealand Plant Protection Conference, 297301.
Berry, N.A., Wratten, S.D. and Frampton, C. (1997) Effects of sowing and harvest dates on carrot rust
y (Psila rosae) damage to carrots in Canterbury, New Zealand. New Zealand Journal of Crop
and Horticultural Science 25, 109115.
Berryman, A.A. (1987) The theory and classication of outbreaks. In: Barbosa, P. and Schultz, J.C.
(eds) Insect Outbreaks. Academic Press, San Diego and London, pp. 330.
Bifani, P. (1986) Socioeconomic aspects of technological innovation in food production systems. In:
Marini Bettolo, G.B. (ed.) Towards a Second Green Revolution. From Chemicals to New
Biological Technologies in Agriculture in the Tropics. Developments in Agriculture and
Managed Forest Ecology, 19. Elsevier, Oxford, UK, pp. 177221.
Bintcliffe, E.J.B. and Wratten, S.D. (1982) Antibiotic resistance in potato cultivars to the aphid Myzus
persicae. Annals of Applied Biology 100, 383391.
Birch, N. and Wratten, S.D. (1984) Patterns of aphid resistance in the genus Vicia. Annals of Applied
Biology 104, 327338.
Black, W.C. (IV), DuTeau, N.M., Puterka, G.J., Nechols, J.R. and Pettorini, J.M. (1992) Use of the ran-
dom amplied polymorphic DNA polymerase chain reaction (RAPD-PCR) to detect DNA poly-
morphisms in aphids (Homoptera: Aphididae). Bulletin of Entomological Research 82, 151159.
Blackshaw, R.P. (1994) Sampling for leatherjackets in grassland. Aspects of Applied Biology 37, 95102.
Blackshaw, R.P. (1995) Effect of tank-mixing on economic thresholds for pest control. Annals of
Applied Biology 41, 4149.
Blackshaw, R.P. and Thompson, D. (1993) Comparative effects of bark and peat based composts on
the occurrence of vine weevil larvae and the growth of containerised polyanthus. Journal of
Horticultural Science 68, 725729.
Blackshaw, R.P., Stewart, R.M., Humphreys, I.C. and Coll, C. (1994) Preventing leatherjacket damage
to cereals. Aspects of Applied Biology 37, 189196.
Blanford, S., Thomas, M.B. and Langewald, J. (1998) Behavioural fever in a population of the
346 References
Insect Refs 11/7/00 9:29 am Page 346
Senegalese grasshopper, Oedaleus senegalensis, and its implications for biological control using
pathogens. Ecological Entomology 23, 914.
Blanford, S., Thomas, M.B. and Langewald, J. (in press) Thermal ecology of Zonocerus variegatus
and its effect on biocontrol using pathogens. Agricultural and Forest Entomology.
Blight, M.M., Hick, A.J., Pickett, J.A., Smart, L.E., Wadhams, L.J. and Woodcock, C.M. (1995) Oilseed
rape volatiles cueing host-plant recognition by the seed weevil, Ceutorhynchus assimilis: chemi-
cal, electrophysiological and behavioural studies. Proceedings of the Ninth International
Rapeseed Congress: Rapeseed Today and Tomorrow 3, 10311033.
Boller, E.F. (1972) Behavioural aspects of mass-rearing of insects. Entomophaga 17, 925.
Boller, E.F. (1987) Genetic control. In: Burn, A.J., Coaker, T.H. and Jepson, P.C. (eds) Integrated Pest
Management. Academic Press, London, pp. 161187.
Bomford, M. (1988) Effect of wild ducks on rice production. In: Norton, G.A. and Pech, R.P. (eds)
Vertebrate Pest Management in Australia. CSIRO, Division of Wildlife and Ecology, Canberra,
Australia, pp. 5357.
Bonnemaison, L. (1951) Contributio a ledtude des facteurs provoquant lapparition des formes ailees
et sexuees chez les Aphidinae. Annals Epiphyties 2, 1380.
Boote, K.J., Jones, J.W., Mishoe, J.W. and Berger, R.D. (1983) Coupling pests to crop growth simulators
to predict yield reductions. Phytopathology 73, 15811587.
Borden, J.H. (1990) Use of semiochemicals to manage coniferous tree pests in western Canada. In:
Ridgway, R.L., Silverstein, R.M. and Inscoe, M.N. (eds) Behaviour-modifying Chemicals for
Insect Management. Applications of Pheromones and other Attractants. Marcel Dekker Inc.,
New York and Basel, pp. 281315.
Boreham, P.F.L. and Ohiagu C.E. (1978) The use of serology in evaluating invertebrate prey-predator
relationships: a review. Bulletin of Entomological Research 68, 171194.
Bottrell, D.G., Aguda, R.M., Gould, F.L., Theunis, W., Demayo, C.G. and Magalit, V.F. (1992) Potential
strategies for prolonging the usefulness of Bacillus thuringiensis in engineered rice. Korean
Journal of Applied Entomology 31, 247255.
Boulter, D., Edwards, G.A., Gatehouse, A.M.R., Gatehouse, J.A. and Hilder, V.A. (1990) Additive pro-
tective effects of incorporating two different higher plant derived insect resistance genes in
transgenic tobacco plants. Crop Protection 9, 351354.
Bowden, J. (1973) The inuence of moonlight on catches of insects in light-traps in Africa. Part I. The
moon and moonlight. Bulletin of Entomological Research 63, 113128.
Bowden, J. (1982) An analysis of factors affecting catches of insects in light-traps. Bulletin of
Entomological Research 72, 535556.
Bowden, J. and Church, B.M. (1973) The inuence of moonlight on catches of insects in light-traps in
Africa. Part II. The effect of moon phase on light-trap catches. Bulletin of Entomological
Research 63, 129142.
Bowden, J. and Morris, M.G. (1975) The inuence of moonlight on catches of insects in light-traps in
Africa. Part III. The effective radius of a mercury-vapour light-trap and the analysis of catches
using effective radius. Bulletin of Entomological Research 65, 303348.
Bowers, R.C. (1982) Commercialisation of microbial biological control agents. In: Charudattan, R. and
Walker, H.L. (eds) Biological Control of Weed with Plant Pathogens. John Wiley, New York, USA,
pp. 157173.
Bowers, W.S. (1971) Juvenile hormones. In: Jacobson, M. and Crosby, D.G. (eds) Naturally Occurring
Insecticides. Marcel Dekker Inc., New York.
Boyetchko, S.M., Pederson, E., Punja Z.K. and Reddy, M.S. (1999) Formulations of biopesticides. In:
Hall, F.R. and Menn, J.J. (eds) Methods in Biotechnology, Volume 5: Biopesticides: Use and
Delivery. Humana Press, Totowa, New Jersey, USA, pp. 487508.
Brader, L. (1979) Integrated pest control in the developing world. Annual Review of Entomology 24,
225254.
Bradshaw, N.J., Parham, C.J. and Croxford, A.C. (1996) The awareness, use and promotion of inte-
grated control techniques of pests, diseases and weeds in British agriculture and horticulture. In:
Proceedings 1996 British Crop Protection Conference Pests and Diseases. British Crop
Protection Council, Farnham, UK, pp. 591596.
Breese, M.H. (1960) The infestibility of stored paddy by Sitophilus sasakii (Tak.) and Rhyzopertha
dominica (F.). Bulletin of Entomological Research 51, 599630.
References 347
Insect Refs 11/7/00 9:29 am Page 347
Briggs, K.G. and Shebeski, L.H. (1968) Implications concerning the frequency of control plots in
wheat breeding nurseries. Canadian Journal of Plant Science 48, 149153.
Briggs, K.G. and Shebeski, L.H. (1970) Visual selection for yielding ability of F
3
lines in a hard red
spring wheat breeding programme. Crop Science 10, 400402.
Bringhurst, R.S. and Galleta, G.J. (1990) Strawberry management. In: Galleta, G.J. and Himmilrick,
D.G. (eds) Small Fruit Crop Management. Prentice-Hall, Englewood Cliffs, New York, USA.
Britton, R.J. (1988) Physiological effects of natural and articial defoliation on the growth of young
crops of lodgepole pine. Forestry 61, 165175.
Brodbeck, B. and Strong, D. (1987) Amino acid nutrition of herbivorous insects and stress to host
plants. In: Barbosa, P. and Schultz, J.C. (eds) Insect Outbreaks. Academic Press, San Diego and
London, pp. 347363.
Brodsgaard, H.F. (1994) Effect of photoperiod on the bionomics of Frankliniella occidentalis.
Zeitschrift fur Angewandte Entomologie 117, 498507.
Brodsgaard, H.F. and Enkegaard, A. (1997) Interactions among polyphagous anthocorid bugs used for
thrips control and other benecials in multi-species biological pest management systems. Recent
Research Developments in Entomology 1, 153160.
Broughton, S., Gleeson, P., Hancock, D. and Osborne, R. (1998) Eradicating Bactrocera papayae Drew
& Hancock from North Queensland. Proceedings of the 5th International Symposium Fruities
of Economic Importance. Penang, Malaysia.
Browde, J.A., Pedigo, L.P., Owen, M.D.K. and Tylka, G.L. (1994a) Soybean yield and pest manage-
ment as inuenced by nematodes, herbicides and defoliating insects. Agronomy Journal 86,
601608.
Browde, J.A., Pedigo, L.P., Owen, M.D.K., Tylka, G.L. and Levene, B.C. (1994b) Growth of soybean
stressed by nematodes, herbicides and simulated insect defoliation. Agronomy Journal 86, 968974
Browde, J.A., Tylka, G.L., Pedigo, L.P. and Owen, M.D.K. (1994c) A method for infesting small eld
plots with soybean cyst nematode. Agronomy Journal 86, 585587.
Brown, K.C. (1998) The value of eld studies with pesticides and non-target arthropods. The 1998
Brighton Conference: Pests and Diseases Volume 2. British Crop Protection Council, Farnham,
UK, pp. 575582.
Brown, T.M. and Brogdon, W.G. (1987) Improved detection of insecticide resistance through conven-
tional and molecular techniques. Annual Review of Entomology 32, 145162.
Bryant, E.H., Combs, L.M. and McCommas, S.A. (1986a) Morphometric differentiation among experi-
mental lines of the housey in relation to a bottleneck. Genetics 114, 12131223.
Bryant, E.H., McCommas, S.A. and Combs, L.M. (1986b) The effect of an experimental bottleneck
upon quantitative genetic variation in the housey. Genetics 114, 11911214.
Buckner, C.H. (1966) The role of vertebrate predators in the biological control of forest insects.
Annual Review of Entomology 11, 449470.
Buckner, C.H. (1967) Avian and mammalian predators of forest insects. Entomophaga 12, 491501.
Buddenhagen, I.W. (1983) Plant breeding or pesticides to narrow the Yield Gap? 10th Annual
Congress of Plant Protection 1983, Plant Protection for Human Welfare. Volume 2. British Crop
Protection Council, Farnham, UK, pp. 803809
Budenberg, W.J. (1990) Honeydew as a contact kairomone for aphid parasitoids. Entomologia
Experimentalis et Applicata 55, 139148.
Burditt, A.K. Jr. (1986) g irradiation as a quarantine treatment for walnuts infested with codling
moths (Lepidoptera: Tortricidae). Journal of Economic Entomology 79, 15771579.
Burditt, A.K. Jr. and Balock, J.W. (1985) Refrigeration as a quarantine treatment for fruits and vegeta-
bles infested with eggs and larvae of Dacus dorsalis and Dacus cucurbitae (Diptera: Tephritidae).
Journal of Economic Entomology 78, 885887.
Burgess, H.D. (ed.) (1981) Microbial Control of Pests and Plant Diseases, 19701980. Academic Press,
London.
Burgess, H.D. (1982) Control of insects by bacteria. Parasitology 84, 79117.
Burgess, H.D. (1998) Formulation of Microbial Biopesticides. Kluwer Academic Publishers,
Dordrecht.
Burn, A.J. (1984) Life-tables for the carrot y Psila rosae. Journal of Applied Ecology 21, 891902.
Busvine, J.R. (1971) A Critical Review of the Techniques for Testing Insecticides. Commonwealth
Institute of Entomology, London.
348 References
Insect Refs 11/7/00 9:29 am Page 348
Busvine, J.R. (1976) Pest resistance to pesticides. In: Gunn, D.L. and Stevens, J.G.R. (eds) Pesticides
and Human Welfare. Oxford University Press, pp. 193205.
Byerlee, D., Collinson, M.P., Perrin, R.K., Winkelmann, D.L., Biggs, S., Moscardi, E.R., Martinez, J.C.,
Harrington, L. and Benjamin, A. (1980) Planning Technologies Appropriate to Farmers:
Concepts and Procedures. CIMMYT, El Batan, Mexico.
Cadogan, B.L., Retnakaran, A. and Meating, J.H. (1997) Efcacy of RH5992, a new insect growth regu-
lator against spruce budworm (Lepidoptera: Tortricidae) in a boreal forest. Journal of Economic
Entomology 90, 551559.
Caltagirone, L.E. (1985) Identifying and discriminating among biotypes of parasites and predators. In:
Hoy, M.A. and Herzog, D.C. (eds) Biological Control in Agricultural IPM Systems. Academic
Press, Orlando and London, pp. 189200.
Campanhola, C., Jos de Moraes, G. and de S, L.A.N. (1995) Review of IPM in South Africa. In:
Mengech, A.N., Saxena, K.N. and Gopalan, H.N.B. (eds) Integrated Pest Management in the
Tropics. John Wiley & Sons, Chichester, UK, pp. 121152.
Campbell, A., Frazer, B.D., Gilbert, N., Gutierrez, A.P. and Mackauer, M. (1974) Temperature require-
ments of some aphids and their parasites. Journal of Applied Ecology 11, 431438.
Campion, D.G. (1972) Insect chemosterilants: a review. Bulletin of Entomological Research 61,
577635.
Campion, D.G. (1989) Semiochemicals for the control of insect pests. British Crop Protection Council
Monograph No. 43. Progress and Prospects in Insect Control. British Crop Protection Council,
Farnham, UK, pp. 119127.
Campion, D.G., Bettany, B.W. and Steedman, R.A. (1974) The arrival of male moths of the cotton leaf-
worm Spodoptera littoralis (Boisd.) (Lepidoptera, Noctuidae) at a new continuously recording
pheromone trap. Bulletin of Entomological Research 64, 379386.
Campion, D.G., Bettany, B.W., McGinnigle, J.B. and Taylor, L.R. (1977) The distribution and migration of
Spodoptera littoralis (Boisduval) (Lepidoptera, Noctuidae), in relation to meteorology on Cyprus,
interpreted from maps of pheromone trap samples. Bulletin of Entomological Research 67, 501522.
Campion, D.G., Critchley, B.R. and McVeigh, L.J. (1989) Mating disruption. In: Jutsum, A.R. and
Gordon, R.F.S. (eds) Insect Pheromones in Plant Protection. John Wiley & Sons, Chichester, UK,
pp. 89119.
Canning, E.U. (1982) An evaluation of protozoal characteristics in relation to biological control of
pests. Parasitology 84, 119149.
Cannon, R.J.C. (1986) Summer populations of the cereal aphid Metopolophium dirhodium (Walker)
on winter wheat: three contrasting years. Journal of Applied Ecology 23, 101114.
Cantelo, W.W. and Sanford, L.L. (1984) Insect population response to mixed and uniform plantings
of resistant and susceptible plant material. Environmental Entomology 13, 14431445.
Capinera, J.L., Epsky, N.D. and Thompson, D.C. (1986) Effects of adult western corn rootworm
(Coleoptera: Chrysomelidae) ear feeding on irrigated eld corn in Colorado. Journal of Economic
Entomology 79, 16091612.
Card, R.T. (1990) Principles of mating disruption. In: Ridgway, R.L., Silverstein, R.M. and Inscoe,
M.N. (eds) Behaviour-modifying Chemicals for Insect Management. Applications of Pheromones
and other Attractants. Marcel Dekker Inc., New York and Basel, pp. 4771.
Carson, R. (1962) Silent Spring. Riverside Press, Boston.
Carter, A.D. and Heather, A.I.J. (1995) Pesticides in Groundwater. In: Best, G.A. and Ruthven, A.D.
(eds) Pesticides Developments, Impacts, and Controls. The Royal Society of Chemistry,
London, UK, pp. 113123.
Carter, N. and Rabbinge, R. (1980) Simulation models of the population development of Sitobion ave-
nae. IOBC/WPRS Bulletin 1980. 111, 9398.
Caudwell, R.W. and Gatehouse, A.G. (1994) Extruded starch contact baits for the formulation of
grasshopper and locust entomopathogens. British Crop Protection Council Conference: Pests and
Diseases 1994, Volume 1. British Crop Protection Council, pp. 6774.
Cenis, J.L., Perez, P. and Fereres, A. (1993) Identication of aphid (Homoptera: Aphididae) species
and clones by random amplied polymorphic DNA. Annals of the Entomological Society of
America 86, 545550.
Chambers, R. (1983) Rural Development: Putting the Last First. Longman Scientic & Technical,
Harlow, UK.
References 349
Insect Refs 11/7/00 9:29 am Page 349
Chambers, R.J., Sunderland, K.D., Wyatt, I.J. and Vickerman, G.P. (1983) The effects of predator
exclusion and caging on cereal aphids on winter wheat. Journal of Applied Ecology 20, 209224.
Chambers, R., Pacey, A. and Thrupp, L.A. (1989) Farmer First. Farmer Innovation and Agricultural
Research. Intermediate Technology Publications, London.
Chandler, L.D., Gilstrap, F.E. and Browning, H.W. (1988) Evaluation of the within-eld mortality of
Liriomyza trifolii (Diptera: Agromyzidae) on bell pepper. Journal of Economic Entomology
81, 10891096.
Chandler, L.D., Pair, S.D. and Harrison, W.E. (1992) RH5992 a new insect growth regulator active
against corn earworm and fall armyworm (Lepidoptera: Noctuidae). Journal of Economic
Entomology 85, 10991103.
Chang, K.-S. and Morimoto, N. (1988) Life table studies of the walnut leaf beetle, Gastrolina depressa
(Coleoptera: Chrysomelidae), with special attention to aggregation. Research in Population
Ecology 30, 297313.
Chapman, C.G.D. (1996) Using molecular markers to breed for pest and disease resistance. Brighton
Crop Protection Conference: Pests and Diseases Volume 3. British Crop Protection Council,
Farnham, UK, pp. 783788.
Chapple, A.C. and Bateman, R.P. (1997) Application systems for microbial pesticides: necessity not
novelty. In: Evans, H.F. (ed.) British Crop Protection Council Symposium Proceedings No. 68.
Microbial Insecticides: Novelty or Necessity? British Crop Protection Council, Farnham, UK,
pp. 243252.
Charmillot, P.J. (1990) Mating disruption technique to control codling moth in Western Switzerland.
In: Ridgway, R.L., Silverstein, R.M. and Inscoe, M.N. (eds) Behaviour-modifying Chemicals for
Insect Management. Applications of Pheromones and other Attractants. Marcel Dekker, New
York and Basel, pp. 65182.
Chaudhary, R.C. and Khush, G.S. (1990) Breeding rice varieties for resistance against Chilo spp. of
stem borers in Asia and Africa. Insect Science Applications 11, 659669.
Cheng, J.A. and Holt, J. (1990) A systems analysis approach to brown planthopper control on rice in
Zhejiang Province, China. I. Simulation of outbreaks. Journal of Applied Ecology 27, 8599.
Cheng, J.A., Norton, G.A. and Holt, J. (1990) A systems analysis approach to brown planthopper con-
trol on rice in Zhejiang Province, China. II. Investigations of control strategies. Journal of
Applied Ecology 27, 100112.
Chiang, H.C. and Wallen, V.R. (1971) Detection and assessment of crop diseases and insect infesta-
tions by aerial photography. In: Chiarappa, L. (ed.) Crop Loss Assessment Methods. FAO Manual
on the Evaluation and Prevention of Losses by Pests, Disease and Weeds. Commonwealth
Agricultural Bureau, Slough, UK.
Church, B.M. (1971) The place of sample survey in crop-loss estimation. In: Chiarappa, L. (ed.) Crop
Loss Assessment Methods, FAO Manual on the Evaluation and Prevention of Losses by Pest,
Disease and Weeds. Commonwealth Agricultural Bureau, Slough, UK.
Cilgi, T., Jepson, P.C. and Unal, G. (1988) The short term exposure of non-target invertebrates to pesti-
cides in the cereal canopy. British Crop Protection Council Conference Pests and Diseases,
Volume 2. British Crop Protection Council, pp. 759764.
Claridge, M.F. and Den Hollander, J. (1980) The biotypes of the rice brown planthopper, Nilaparvata
lugens. Entomologia Experimentalis et Applicata 27, 2330.
Claridge, M.F. and Den Hollander, J. (1983) The biotype concept and its application to insect pests of
agriculture. Crop Protection 2, 8595.
Claridge, M.F. and Walton, M.P. (1992) The European Olive and its pests management strategies. In:
Haskell, P.T. (ed.) Research Collaboration in European IPM Systems. British Crop Protection
Council Monograph No. 52, British Crop Protection Council, Farnham, UK, pp. 312.
Clark, W.J., Harris, F.A., Maxwell, F. G and Hartwig, E.E. (1972) Resistance of certain soybean culti-
vars to beanleaf beetle, blister beetle and bollworm. Journal of Economic Entomology 65,
16691672.
Clarke, A.M. (1994) The human factors of project management. In: Management of Collaborative
European Programmes and Projects in Research, Education and Training. University of Oxford,
Oxford, UK.
Clarke, N.D., Shipp, J.L., Jarvis, W.R., Papadopoulos, A.P. and Jewett, T.J. (1994) Integrated management
of greenhouse crops a conceptual and potentially practical model. HortScience 29, 846849.
350 References
Insect Refs 11/7/00 9:29 am Page 350
Clausen, C.P. (ed.) (1978) Introduced Parasites and Predators of Arthropod Pests and Weeds: A World
Review. USDA Handbook No. 480.
Clements, A.N. and Paterson, G.D. (1981) The analysis of mortality and survival rates in wild popula-
tions of mosquitoes. Journal of Applied Ecology 18, 373399.
Clunies-Ross, T. and Hildyard, N. (1992) The Politics of Industrial Agriculture: A Report by the
Ecologist. Earthscan, London.
Coaker, T.H. (1965) Further experiments on the effect of beetle predators on the numbers of the cabbage
root y, Erioishia brassicae (Bouche), attacking brassica crops. Annals of Applied Biology 56, 720.
Coaker, T.H. (1987) Cultural methods: the crop. In: Burn, A.J., Coaker, T.H. and Jepson, P.C. (eds)
Integrated Pest Management. Academic Press, London, pp. 6988.
Coaker, T.H. (1990) Intercropping for pest control. British Crop Protection Council Monograph No.
45. Crop Protection in Organic and Low Input Agriculture. Options for Reducing Agrochemical
Usage. British Crop Protection Council, Farnham, UK, pp. 7176.
Cobley, L.S. and Steele, W.M. (1976) An Introduction to the Botany of Tropical Crops, 2nd edn.
Longman, London and New York.
Cochran, W.G. (1977) Sampling Techniques. John Wiley & Sons, New York.
Cochran, W.G. and Cox, G.M. (1957) Experimental Designs, 2nd edn. John Wiley & Sons, New York.
Cogburn, R.R. and Bollich, C.N. (1980) Breeding for host plant resistance to stored rice insects. In:
Harris, M.K. (ed.) Biology and Breeding for Resistance to Arthropods and Pathogens in
Agricultural Plants. Texas A & M University, pp. 355358.
Cohen, M.B., Alam, S.N., Medina, E.G. and Bernal, C.C. (1997) Brown planthopper, Nilaparvata
lugens, resistance in rice cultivar IR64: mechanism and role in successful N. lugens management
in Central Luzon, Philippines. Entomologia Experimentalis et Applicata 85, 221229.
Cole, N.A., Guillot, F.S. and Purdy, C.W. (1984) Inuence of Psoroptes ovis (Heing) (Acari:
Psoroptidae) on the performance of beef steers. Journal of Economic Entomology 77, 390393.
Collier, R.H. and Finch, S. (1985) Accumulated temperatures for predicting the time of emergence in
the spring of the cabbage root y, Delia radicum (L.) (Diptera: Anthomyiidae). Bulletin of
Entomological Research 75, 395404.
Collier, R.H., Davies, J., Roberts, M., Leatherland, M., Runham, S. and Blood Smyth, J. (1994)
Supervised control of foliar pests in Brussels sprouts and calabrese crops. In: Finch, S. and
Brunel, E. (eds) International Control in Field Vegetable Crops. IOBC wprs Bulletin Vol. 17,
pp. 3140.
Collins, S.A. (1994) Strategic management in the development of integrated pest and disease manage-
ment programmes. Proceedings 1994 British Crop Protection Conference Pests and Diseases.
British Crop Protection Council, Farnham, UK, pp. 115124.
Comins, H.N. and Wellings, P.W. (1985) Density-related parasitoid sex-ratio: inuence on host-para-
sitoid dynamics. Journal of Animal Ecology 54, 583594.
Compton, J.A.F., Tyler, P.S., Mumford, J.D., Norton, G.A., Jones, T.H. and Hindmarsh, P.S. (1992)
Potential for an expert system for pest control in tropical grain stores. Tropical Science 32,
295303.
Conway, G.R. (1976) Man versus pests. In: May R.M. (ed.) Theoretical Ecology. Blackwell Scientic
Publications, Oxford, UK, pp. 356386.
Conway, G.R. (1981) Man versus pests. In: May R.M. (ed.) Theoretical Ecology, 2nd edn. Blackwell
Scientic Publications, Oxford, UK, pp. 356386.
Conway, G.R. (1984a) Strategic models. In: Conway, G.R. (ed.) Pest and Pathogen Control: Strategic,
Tactical and Policy Models. John Wiley and Sons, Chichester, pp. 1528.
Conway, G.R. (1984b) Tactical models. In: Conway, G.R. (ed.) Pest and Pathogen Control: Strategic,
Tactical and Policy Models. John Wiley and Sons, Chichester, pp. 209220.
Conway, G.R. and Barbier, E.B. (1990) After the Green Revolution: Sustainable Agriculture for
Development. Earthscan Publications Ltd, London, UK.
Cook, S.P., Hain, F.P. and Smith, H.R. (1994) Oviposition and pupal survival of gypsy moth
(Lepidoptera: Lymantriidae) in Virginia and North Carolina pine-hardwood forests.
Environmental Entomology 23, 360366.
Cook, S.P., Smith, H.R., Hain, F.P. and Hastings, F.L. (1995) Predation by gypsy moth (Lepidoptera:
Lymantriidae) pupae by invertebrates at low small mammal population densities.
Environmental Entomology 24, 12341238.
References 351
Insect Refs 11/7/00 9:29 am Page 351
Copping, L. (1999) The Biopesticides Manual. British Crop Protection Council, Farnham, UK.
Copplestone, J.F. (1985) Safe use of pesticides. In: Haskell, P.T. (ed.) Pesticide Application: Principles
and Practice. Clarendon Press, Oxford, pp. 202216.
Couey, H.M., Armstrong, J.W., Hylin, J.W., Thornburg, W., Nakamura, A.N., Linse, E.S., Ogata, J. and
Vetro, R. (1985) Quarantine procedure for Hawaii papaya, using a hot-water treatment and high-
temperature, low-dose ethylene dibromide fumigation. Journal of Economic Entomology 78,
879884.
Coulson, J.R., Klaasen, W., Cook, R.J., King, E.G., Chiang, H.C., Hagen, K.S. and Yendol, W.G. (1982)
Notes on biological control of pests in China, 1979. In: Biological Control of Pests in China.
United States Department of Agriculture, Washington, D.C., USA.
Cowgill, S.E., Wratten, S.D. and Sotherton, N.W. (1993) The effect of weeds on the number of hover-
y (Diptera: Syrphidae) adults and the distribution and composition of their eggs in winter
wheat. Annals of Applied Biology 123, 499515.
Cox, J. and Williams, D.J. (1981) An account of cassava mealybug with a description of a new
species. Bulletin of Entomological Research 71, 247258.
Craig, J.B. (1955) The natural history of sheep blowies in Britain. Annals of Applied Biology 42,
197207.
Cremlyn, R. (1978) Pesticides: Preparation and Mode of Action. John Wiley & Sons, Chichester.
Critchley, B.R., Campion, D.G., McVeigh, L.J., Hunter-Jones, P., Hall, D.R., Cork, A., Nesbitt, B.F.,
Marks, G.J., Justun, A.R., Hosny, M.M. and Nasr, E-S.A. (1983) Control of pink bollworm
Pectinophora gossypiella (Saunders) (Lepidoptera: Gelechiidae), in Egypt by mating disruption
using an aerially applied microencapsulated pheromone formulation. Bulletin of Entomological
Research 73, 289299.
Critchley, B.R., Campion, D.G. and McVeigh, L.J. (1989) Pheromone control in the integrated pest
management of cotton. In: Green, M.B. and de B. Lyon, D.J. (eds) Pest Management in Cotton.
Ellis Horwood, Chichester, UK, pp. 8392.
Croll, B.T. (1995) The removal of pesticides during drinking water treatment. In: Best, G.A. and
Ruthven, A.D. (eds) Pesticides Developments, Impacts, and Controls. The Royal Society of
Chemistry, London, UK, pp. 125134.
Cromatie, W.J. (1991) The environmental control of insects using crop diversity. In: Pimentel, D. (ed.)
Handbook of Pest Management in Agriculture, Volume 1, 2nd edn. CRC, Boca Raton, Florida,
USA, pp. 182216.
Crook, N.E. and Sunderland, K.D. (1984) Detection of aphid remains in predatory insects and spiders
by ELISA. Annals of Applied Biology 105, 413422.
CTIC (1995) Conservation Impact. Conservation Technology Information Center 12, 16.
Cunnington, A.M. (1976) The effect of physical conditions on the development and increase of some
important storage mites. Annals of Applied Biology 82, 175201.
Daly, J.C. (1993) Ecology and genetics of insecticide resistance in Helicoverpa armigera: interactions
between selection and gene ow. Genetica 90, 217226.
Daly, J.C. and Fisk, J.H. (1992) Inheritance of metabolic resistance to the synthetic pyrethroids in
Australian Helicoverpa armigera (Lepidoptera: Noctuidae). Bulletin of Entomological Research
82, 512.
Daly, J.C. and Fisk, J.H. (1995) Decrease in tolerance to fenvalerate, in resistant Helicoverpa armigera
after pupal diapause. Entomologia Experimentalis et Applicata 77, 217222.
Daly, J.C. and McKenzie, J.A. (1986) Resistance management strategies in Australia: the Heliothis
Wormkill programmes. Proceedings 1986 British Crop Protection Conference Pests and
Diseases. British Crop Protection Council, Farnham, UK, pp. 951959.
Daly, J.C. and Trowell, S. (1996) Biochemical approaches to the study of ecological genetics: the role
of selection and gene ow in the evolution of insecticide resistance. In: Symondson, W.O.C. and
Liddell, J.E. (eds) The Ecology of Agricultural Pests. Chapman & Hall, London, pp. 7391.
Davidson, G. (1974) Genetic Control in Insect Pests. Academic Press, London, UK.
Davies, E.T. and Dunford, W.J. (1962) Some Physical and Economic Considerations of Field
Enlargement. University of Exeter; Department of Agricultural Economics Publication No. 133.
Dawson, G.W., Doughty, K.J., Hick, A.J., Pickett, J.A., Pye, B.J., Smart, L.E. and Wadhams, L.J. (1993)
Chemical precursors for studying the effects of glucosinolate catabolites on diseases and pests of
oilseed rape (Brassica napus) or related plants. Pesticide Science 39, 271278.
352 References
Insect Refs 11/7/00 9:29 am Page 352
Dawson, G.W., Grifths, D.C., Hassanali, A., Pickett, J.A., Plumb, R. T, Pye, B.J., Smart, L.E. and
Woodcock, C.M. (1986) Antifeedants: a new concept for control of barley yellow dwarf virus in
winter cereals. Proceedings 1986 Crop Protection Conference Pests and Diseases. British Crop
Protection Council, Farnham, UK, pp. 10011008.
Day, K.R. and Leather, S.R. (1997) Threats to forestry by insect pests in Europe. In: Watt, A.D., Stork,
N.E. and Hunter, M.D. (eds) Forests and Insects. Chapman & Hall, London, pp.177206.
Day, R.K. and Collins, M.D. (1992) Simulation modelling to assess the potential value of formulation
development of lambda-cyhalothrin. Pesticide Science 15, 4561.
de Bono, E. (1970) Lateral Thinking: A Textbook of Creativity. Penguin Books, Aylesbury, UK.
de Lima, C.P.F. (1979) Ecology and the integrated control approach under tropical conditions.
Proceedings of the 2nd International Working Conference on Stored Product Entomology,
Ibadan, Nigeria. Savannah, Georgia, USA, pp. 4448.
de Ponti, O.M.B. (1982) Resistance to insects: a challenge to plant breeders and entomologists. In:
Visser, J.H. and Minks, A.K. (eds) Proceedings of the 5th International Symposium on Insect
Plant Relationships. Pudoc, Wageningen, The Netherlands, pp. 337348.
de Ponti, O.M.B., Romanov, L.F. and Berlinger, M.J. (1990) Whitey-plant relationships: plant resis-
tance. In: Gerling, D. (ed.) Whiteies: their Bionomics, Pest Status and Management. Intercept,
Andover, pp. 91106.
de Visser, P. (1991) Kennissysteem helpt fruiteler bij gewasbescherming. Kennissystemen 6, 35.
Deacon, J.W. (1983) Microbial Control of Plant Pests and Diseases. Van Nostrand Reinhold (UK)
Company Limited, Wokingham, UK.
DeBach, P. (1974) Biological Control by Natural Enemies. Cambridge University Press, Cambridge, UK.
DeBach, P. and Hagen, K.S. (1964) Manipulation of entomophagous species. In: DeBach, P. (ed.)
Biological Control of Insect Pests and Weeds. Chapman and Hall, London, pp. 283304.
DeBach, P. and Huffaker, C.B. (1971) Experimental techniques for evaluation of the effectiveness of
natural enemies. In: Huffaker, C.G. (ed.) Biological Control. Plenum Press, New York and
London, pp. 113140.
DeGrooyer, T.A., Pedigo, L.P. and Giles, K.L. (1995) Population dynamics of the alfalfa weevil
(Coleoptera: Curculionidae) in Central and Southern Iowa. Journal of the Kansas Entomological
Society 68, 268278.
Delanney, X., Lavallee, B.J., Proksch, R.K., Fuchs, R.L., Sims, S.R., Greenplate, J.T., Marrone, P.G.,
Dodson, R.B., Augustine, J.J., Layton, J.G. and Fischhoff, D.A. (1989) Field performance of trans-
genic tomato plants expressing the Bacillus thuringiensis var. kurstaki insect control protein.
Bio/Technology 7, 12651269.
Delobel, A.G.L. (1981) Effects of sorghum density on oviposition and survival of the sorghum shoot
y, Atherigona soccata. Entomologia Experimentalis et Applicata 31, 170174.
Delrio, G. (1992) Integrated control in olive groves. In: van Lenteren, J.C., Minks, A.K. and de Ponti,
O.M.B. (eds) Biological Control and Integrated Crop Protection: Towards Environmentally Safer
Agriculture. Pudoc Scientic Publishers, Wageningen, The Netherlands, pp. 6776.
Dempster, J.P. (1960) A quantitative study of the predators on the eggs and larvae of the broom beetle,
Phytodecta olivacea Forster, using the precipitin test. Journal of Animal Ecology 29, 149167.
Dempster, J.P. (1967) The control of Pieris rapae with DDT. I. The natural mortality of the young
stages of Pieris. Journal of Applied Ecology 4, 485500.
Den Hollander, J. and Pathak, P.K. (1981) The genetics of the biotypes of the rice brown planthop-
per, Nilaparvata lugens. Entomologia Experimentalis et Applicata 29, 7686.
Deng, G.R., Yang, H.H. and Jin, M.X. (1987) Augmentation of coccinellid beetles for controlling
sugarcane woolly aphid. Chinese Journal of Biological Control 3, 166168.
Denholm, I., Birnie, L.C., Kennedy, P.J., Shaw, K.E., Perry, J.N. and Powell, W. (1998) The comple-
mentary roles of laboratory and eld testing in ecotoxicological risk assessment. The 1998
Brighton Conference: Pests and Diseases Volume 2. British Crop Protection Council, Farnham,
UK, pp. 583590.
Dennis, P. and Wratten, S.D. (1991) Field manipulation of populations of individual staphylinid
species in cereals and their impact on aphid populations. Ecological Entomology 16, 1724.
Dennis, P., Thomas, M.B. and Sotherton, N.W. (1994) Structural features of eld boundaries which
inuence the overwintering densities of benecial arthropod predators. Journal of Applied
Ecology 31, 361370.
References 353
Insect Refs 11/7/00 9:29 am Page 353
Dent, D.R. (1986) Resistance to the aphid Metopolophium festucae cerealium: effects of the host
plant on ight and reproduction. Annals of Applied Biology 108, 577583.
Dent, D.R. (1990) Bacillus thuringiensis for the control of Heliothis armigera: bridging the gap
between the laboratory and the eld. In: Aspects of Applied Biology, 24. The Exploitation of
Micro-organisms in Applied Biology. Association of Applied Biologists, Wellesbourne, UK,
pp. 179185.
Dent, D.R. (1992) Scientic programme management in collaborative research. In: Haskell, P.T. (ed.)
Research Collaboration in European IPM Systems. British Crop Protection Council Monograph
No. 52, British Crop Protection Council, Farnham, UK, pp. 6976.
Dent, D.R. (1993) Product versus techniques in community-based pest management. In: Saini, R.K.
and Haskell, P.T. (eds) Community-based and Environmentally Safe Pest Management. ICIPE
Science Press, Nairobi, Kenya, pp. 169180.
Dent, D.R. (1994) Strategic Management of an Olive IPM Programme. International Symposium on
Crop Protection, Gent University.
Dent, D.R. (1995) Integrated Pest Management. Chapman & Hall, London.
Dent, D.R. (1996) Research specialisation: a constraint to integration. In: Waibel, H. and Zadoks, J.C.
(eds) Institutional Constraints to IPM. The Pesticide Policy Project, Hannover, Germany, pp.
2126.
Dent, D.R. (1997a) Quantifying insect populations: estimates and parameters. In: Dent, D.R. and
Walton, M.P. (eds) Methods in Ecological and Agricultural Entomology. CAB International,
Wallingford, UK, pp. 57110.
Dent, D.R. (1997b) The research dynamic in the development of IPM systems. In: Allsopp, P.G.,
Rogers, D.J. and Robertson, L.N. (eds) Soil Invertebrates in 1997. Bureau of Sugar Experiment
Stations, Brisbane, Australia, pp. 8691.
Dent, D.R. (1997c) Integrated pest management and microbial insecticides. In: Evans, H.F. (ed.)
British Crop Protection Council Symposium Proceedings No. 68. Microbial Insecticides: Novelty
or Necessity?. British Crop Protection Council, Farnham, UK, pp. 127139.
Dent, D.R. and Pawar, C.S. (1988) The inuence of moonlight and weather on catches of Helicoverpa
armigera Hbner (Lepidoptera: Noctuidae) in light and pheromone traps. Bulletin of
Entomological Research 78, 365377.
Dent, D.R. and Spencer, J. (1993) A simulation study of variables involved in spray application pro-
cedures using a hydraulic knapsack sprayer. International Journal of Pest Management 39,
139143.
Dent, D.R. and Waage, J. (1999) Wanted: investors in biological control. Pesticide News 45, 1011.
Dent, D.R. and Wratten, S.D. (1986) The host-plant relationships of apterous virginoparae of the grass
aphid Metopolophium festucae cerealium. Annals of Applied Biology 108, 567576.
Dewar, A.M. (1992a) The effect of pellet type and insecticides applied to pellets on plant establish-
ment and pest incidence in sugar beet in Europe. Proceedings of the 54th Winter Congress of the
Institut International de Recherches Betteravieres, pp. 89112.
Dewar, A.M. (1992b) The effects of imidacloprid on aphids and virus yellows in sugar beet.
Panzenschutz-Nachrichten Bayer 45, 423442.
Dewar, A.M. (1996) The effect of soil pests on seedling root growth and yield of sugar beet.
Proceedings of the 59th IIRB Congress, February 1996, pp. 229237.
Dewar, A.M. and Asher, M.J.C. (1994) A European perspective on pesticide seed treatments in sugar
beet. Pesticide Outlook June 1994, 1117.
Dewar, A.M., Dean, G.J. and Cannon, R. (1982) Assessment of methods for estimating the numbers of
aphids (Hemiptera: Aphididae) in cereals. Bulletin of Entomological Research 72, 675685.
Dewar, A.M., Read, L., Prince, J. and Ecclestone, P. (1993) Prole on imidacloprid another new seed
treatment for sugar beet pest control. Beet Review 61, 58.
Dickerson, W.A. (1986) Grandlure: use in boll weevil control and eradication programmes in the
United States. Florida Entomologist 69, 147153.
Diehl, S.R. and Bush, G.L. (1984) An evolutionary and applied perspective of insect biotypes.
Annual Review of Entomology 29, 471504.
Dina, S.O. (1976) Effect of insecticidal application at different growth phases on insect damage and
yield of cowpea. Journal of Economic Entomology 69, 186188.
Dingle, H. (1972) Migration strategies of insects. Science 175, 13271335.
354 References
Insect Refs 11/7/00 9:29 am Page 354
Dobrin, G.C. and Hammond, R.B. (1983) Residual effect of selected insecticides against the adult
Mexican bean beetle (Coleoptera: Coccinellidae) on soybeans. Journal of Economic Entomology
76, 14561459.
Dobrin, G.C. and Hammond, R.B. (1985) The antifeeding activity of selected pyrethroids towards the
Mexican bean beetle (Coleoptera: Coccinellidae). Journal of the Kansas Entomological Society
58, 422427.
Dombrowski, N. and Lloyd, T.L. (1974) Atomization of liquids by spinning cups. Chemical
Engineering Journal 8, 6381.
Dos Santos, W.J., Gutierrez, A.P. and Pizzamiglio, M.A. (1989) Evaluating the economic damage
caused by the cotton stem borer Eutinobothrus brasiliensis (Hambleton 1937) in cotton in south-
ern Brazil. Pesquisa Agropecuaria Brasileira 24, 337345.
Dowell, R.V. and Gill, R. (1989) Exotic invertebrates and their effects on California. Pan-Pacic
Entomologist 65, 132145.
Down, R.E., Gatehouse, A.M.R., Hamilton, W.D.O. and Gatehouse, J.A. (1996) Snowdrop lectin
inhibits development and decreases fecundity of the glasshouse potato aphid (Aulacorthum
solani) when administered in vitro and via transgenic plants both in laboratory and glasshouse
trials. Journal of Insect Physiology 42, 10351045.
Drake, V.A. (1990) Methods for studying adult movement in Heliothis. In: Zalucki, M.P. (ed.)
Heliothis: Research Methods and Prospects. Springer-Verlag, Berlin, pp. 109121.
Drummond, R.O., George, J. E and Kunz, S.E. (1988) Control of Arthropod Pests of Livestock: A
Review of Technology. CRC Press Inc., Boca Raton, Florida.
Dubus, I.G., Hollis, J.M., Brown, C.D., Lythgo, C. and Jarvis, J. (1998) Implications of a rst-step envi-
ronmental exposure assessment for the atmospheric deposition of pesticides in the UK. The
1998 Brighton Conference: Pests and Diseases Volume 1. British Crop Protection Council,
Farnham, UK, pp. 273278.
Dudley, N.J., Mueller, R.A.E. and Wightman, J.A. (1989) Application of dynamic programming for
guiding IPM on groundnut leafminer in India. Crop Protection 8, 349357.
Duncan, D.P. and Hodson, A.C. (1958) Inuence of the forest tent caterpillar upon the aspen forests
of Minnesota. Forest Science 4, 7193.
Durno, J. (1989) Recipes for sh with rice. New Scientist 124, 4749.
Easwaramoorthy, S. and Nandagopal, V. (1986) Life tables of internode borer, Chilo sacchariphagus
indicus (k.), on resistant and susceptible varieties of sugarcane. Tropical Pest Management 32(3),
221228.
Edgar, W.D. (1970) Prey and feeding behaviour of adult females of the wolf spider Pardosa amentata
(Clerk.). Netherlands Journal of Zoology 20, 487491.
Edwards, A.J. (1970) Field size and machinery efciency. In: Hooper, M.D. and Holdgate, M.W. (eds)
Hedges and Hedgerow Trees. Monks Wood Symposium No. 4. The Nature Conservancy,
Peterborough, UK.
Edwards, C.A. (1973) Persistent Pesticides in the Environment, 2nd edn. CRC Press, Cleveland, Ohio.
Edwards, C.A. (1987) The environmental impact of pesticides. In: Delucchi, V. (ed.) Integrated Pest
Management, Protection Integre Quo vadis? An International Perspective. Parasitis 86, Geneva,
Switzerland, pp. 309329.
Edwards, C.A., Huelsman, M.F., Yardim, E.N. and Shuster, W.D. (1992) Cultural inputs into inte-
grated crop management and minimising losses of processing tomatoes to pests in the US.
Brighton Crop Protection Conference: Pests and Diseases Volume 2. British Crop Protection
Council, Farnham, UK, pp. 597602.
Edwards, C.A., Huelsman, M.F., Yardim, E.N. and Shuster, W.D. (1996) Cultural inputs into inte-
grated management and minimising losses of processing tomatoes to pests in the US. Brighton
Crop Protection Conference Pests and Diseases 1996, 1821 November, Vol. 2, pp. 597602.
Edwards, C.A., Knacker, T. and Pokarzhevskii, A. (1998) The prediction of the fate and effects of pes-
ticides in the environment using tiered laboratory soil microcosms. The 1998 Brighton
Conference: Pests and Diseases Volume 1. British Crop Protection Council, Farnham, UK,
pp. 267272.
Edwards, P.J. and Wratten, S.D. (1980) Ecology of Insect-Plant Interactions. Edward Arnold,
London.
Egwuatu, R.I. and Ita, C.B. (1982) Some effects of single and split applications of carbofuran on the
References 355
Insect Refs 11/7/00 9:29 am Page 355
incidence of and damage by Locris maculata, Busseola fusca and Sesamia calamistis on maize.
Tropical Pest Management 34, 210214.
Eigenbrode, S.D. and Bernays, E.A. (1997) Evaluation of factors affecting host plant selection, with an
emphasis on studying behaviour. In: Dent, D.R. and Walton, M.P. (eds) Methods in Ecological
and Agricultural Entomology. CAB International, Wallingford, UK, pp. 147170.
El-Adl, M.A., Hosny, M.M. and Campion, D.G. (1988) Mating disruption for the control of pink boll-
worm Pectinophora gossypiella (Saunders) in the delta cotton growing area of Egypt. Tropical
Pest Management 34, 210214.
Elkinton, J.S. and Wood, D.L. (1980) Feeding and boring behaviour of Ips paraconfusus on the bark
of a host and a non-host tree species. Canadian Entomologist 112, 797809.
Elliott, M., James, N.F. and Potter, C. (1978) The future of pyrethroids in insect control. Annual
Review of Entomology 23, 443469.
Elliott, N.C., Kieckhefer, R.W. and Walgenbach, D.D. (1990) Binomial sequential sampling methods
for cereal aphids in small grains. Journal of Economic Entomology 83, 13811387.
Ellis, B.R. (1993) Advances in pest control. Alpine Garden Society Quarterly Bulletin 61, 98102.
Ellis, P.R., Saw, P.L. and Crowther, T.C. (1991) Development of carrot inbreds with resistance to car-
rot y using a single seed descent programme. Annals of Applied Biology 119, 349357.
Ellis, P.R., Singh, R., Pink, D.A.C., Lynn, J.R. and Saw, P.L. (1996) Resistance to Brevicoryne brassicae
in horticultural brassicas. Euphytica 88, 8596.
Emehute, J.K.U. and Egwuatu, R.I. (1990) Effects of eld populations of cassava mealybug,
Phenacoccus manihoti on cassava yield and Epidinocarsis lopezi at different planting dates in
Nigeria. Tropical Pest Management 36, 279281.
Entwistle, J.C. and Dixon, A.F.G. (1986) Short-term forecasting of peak population density of the
grain aphid (Sitobion avenae) on wheat. Annals of Applied Biology 109, 215222.
Ericsson, A., Hellqvist, C., Lngstrm, B., Larsson, S. and Tenow, O. (1985) Effects on growth of sim-
ulated and induced shoot pruning by Tomicus pinipera as related to carbohydrate and nitrogen
dynamics in Scots pine. Journal of Applied Ecology 22, 105124.
Escalada, M.M. and Heong, K.L. (1993) Communication and implementation of change in crop pro-
tection. In: Crop Protection and Sustainable Agriculture. John Wiley & Sons, Chichester, UK,
pp. 191207.
Ester, A., Embrechts, A., Vlaswinkel, M.E.R. and de Moel, C.P. (1994) Protection of eld vegetables
against insect attacks by covering the plot with polyethylene nets. International Symposium on
Crop Protection. University of Gent, p.64.
Evans, A.V. (1936) The physiology of the sheep blow-y Lucilia sericata Meig. (Diptera).
Transactions Royal Entomological Society 85, 363378.
Evans, D.E. (1987) Stored products. In: Burn, A.J., Coaker, T.H. and Jepson, P.C. (eds) Integrated Pest
Management. Academic Press, London, pp. 425461.
Evans, G.C. (1972) The Quantitative Analysis of Plant Growth, Studies in Ecology Vol. 1. Blackwell
Scientic Publications, Oxford.
Eveleens, K.G. (1983) Cotton-insect control in the Sudan Gezira: analysis of a crisis. Crop Protection
2, 273287.
FAO (1986) International Code of Conduct on the Distribution and Use of Pesticides. Food and
Agriculture Organisation of the United Nations, Rome, Italy.
FAO/WHO (1996) Biotechnology and Food Safety. Report of a Joint FAO/WHO Consultation. FAO Food
and Nutrition Paper 61. Food and Agriculture Organisation of the United Nations, Rome, Italy.
Farrell, G., Hodges, R.J. and Golob, P. (1996) Integration of control methods for stored product pests
in East Africa. In: Farrell, G., Greathead, D.J., Hill, M.G. and Kibata, G.N. (eds) Management of
Farm Storage Pests in East and Central Africa. Proceedings of the East and Central African
Storage Pest Management Workshop, Naivasha, Kenya.
Farrell, J.A.K. (1976) Effects of groundnut crop density on the population dynamics of Aphis crac-
civora Koch (Hempitera, Aphididae) in Malawi. Bulletin of Entomological Research 66,
317329.
Ferro, D.N. (1987) Insect pest outbreaks in agroecosystems. In: Barbosa, P. and Schultz, J.C. (eds)
Insect Outbreaks. Academic Press, San Diego and London, pp. 195215.
Finch, S. and Skinner, G. (1974) Some factors affecting the efciency of water-traps for capturing cab-
bage root ies. Annals of Applied Biology 77, 213226.
356 References
Insect Refs 11/7/00 9:29 am Page 356
Finch, S., Skinner, G. and Freeman, G.H. (1976) The effect of plant density on populations of the cab-
bage root y on four cruciferous crops. Annals of Applied Biology 83, 191197.
Finney, D.J. (1971) Prot Analysis. Cambridge University Press, Cambridge, UK.
Fisbie, R.F., El-Zik, K.M. and Wilson, L.T. (1989) Integrated Pest Management Systems and Cotton
Production. John Wiley and Sons, Chichester, UK.
Fisher, K.J., Cromartie, T.H., Kanne, D.B., Leadbetter, M.R., Haag, W.G. and Broadhurst, M D. (1996)
Imidate insecticides: a new class of broad spectrum insecticides. Brighton Crop Protection
Conference: Pests and Diseases Volume 2. British Crop Protection Council, Farnham, UK,
pp. 467472.
Fisher, M.H. (1990) Novel avermectin insecticides and miticides. In: Crombie, L. (ed.) Recent
Advances in Chemistry of Insect Control II. The Royal Society of Chemistry, London, UK,
pp. 5268.
Fisher, R.A. and Ford, E.B. (1947) The spread of a gene in natural conditions in a colony of the moth
Panaxia dominula L. Heredity 1(II), 143174.
Fisher, W.F. and Wright, F.C. (1981) Effects of the sheep scab mite on cumulative weight gains in cat-
tle. Journal of Economic Entomology 74, 234237.
Fitt, G.P. (1994) Cotton pest management, Part 3. An Australian perspective. Annual Review of
Entomology 39, 543562.
Fitt, G.P. and Daly, J.C. (1990) Abundance of overwintering pupae and the spring generation of
Helicoverpa spp. (Lepidoptera: Noctuidae) in northern New South Wales, Australia: conse-
quences for pest management. Journal of Economic Entomology 83, 18271836.
Fitzgerald, J.D., Solomon, M.G. and Murray, R.A. (1986) The quantitative assessment of arthropod
predation rates by electrophoresis. Annals of Applied Biology 109, 491498.
Fletcher, M.R. and Grave, R.C. (1992) Post registration surveillance to detect wildlife problems aris-
ing from approved pesticides. The 1998 Brighton Conference: Pests and Diseases Volume 2.
British Crop Protection Council, Farnham, UK, pp. 793798.
Flinn, P.W., Hagstrum, D.W. and McGaughey, W.H. (1996) Suppression of beetles in stored wheat by
augmentative releases of parasitic wasps. Environmental Entomology 25, 505511.
Flinn, P.W., Hagstrum, D.W. and Muir, W.E. (1997) Effects of time of aeration, bin size and latitude on
insect populations in stored wheat: a simulation study. Journal of Economic Entomology 90,
646651.
Flor, H.H. (1942) Inheritance of pathogenicity in Melampsora lini. Phytopathology 32, 653669.
Fluckiger, C.R. (1989) Cotton simulation models as research tools for insect control. In: McFarlane,
N.R. (ed.) British Crop Protection Council Monograph No. 43. Progress and Prospects in Insect
Control. British Crop Protection Council, Farnham, UK, pp. 217231.
Foley, D.H. (1981) Pupal development rate of Heliothis armigera under constant and uctuating tem-
peratures. Journal of Australian Entomological Society 20, 1320.
Follett, P.A., Cantelo, W.W. and Roderick, G.K. (1996) Local dispersal of overwintered Colorado
potato beetle (Chrysomelidae: Coleoptera) determined by mark and recapture. Environmental
Entomology 25, 13041311.
Forbes, V.E. and Forbes, T.L. (1994) Ecotoxicology in Theory and Practice. Chapman & Hall, London.
Ford, M.G. and Salt, D.W. (1987) Behaviour of insecticide deposits and their transfer from plant to
insect surfaces. In: Cottrell, H.J. (ed.) Pesticides on Plant Surfaces, Critical Reports on Applied
Chemistry Volume 18. John Wiley & Sons, Chichester, pp. 2681.
Forrester, J.W.O. (1961) Industrial Dynamics. M.I.T. Press, Cambridge, Massachusetts, USA.
Forrester, N.W., Cahill, M., Bird, L.J. and Layland, J.K. (1993) Management of pyrethroid and endo-
sulfan resistance in Helicoverpa armigerai (Lepidoptera: Noctuidae) in Australia. Bulletin of
Entomological Research Supplement 1.
Frampton, G.K., Cilgi, T., Fry, G.L.A. and Wratten, S.D. (1995) Effects of grassy banks on the dispersal
of some carabid beetles (Coleoptera: Carabidae) on farmland. Biological Conservation 71,
347355.
France, J. and Thornley, J.H.M. (1984) Mathematical Models in Agriculture. Butterworth and Co.,
London, pp. 161174.
Frazer, B.D. and Gilbert, N. (1976) Coccinellids and aphids: a quantitative study of the impact of
adult ladybirds (Coleoptera: Coccinellidae) preying on eld populations of pea aphids
(Homoptera: Aphididae). Journal of the Entomological Society of British Columbia 73, 3356.
References 357
Insect Refs 11/7/00 9:29 am Page 357
Frazer, B.D., Gilbert, N., Nealis, V. and Raworth, D.A. (1981) Control of aphid density by a complex
of predators. Canadian Entomologist 113, 10351041.
Free, J.B., Pickett, J.A., Feguson, A.W., Simpkins, J.R. and Smith, M.C. (1985) Repelling foraging
honey bees with alarm pheromones. Journal of Agricultural Sciences, Cambridge 105, 255260.
French, N.M., Follett, P., Nault, B.A. and Kennedy, G.G. (1993) Colonization of potato elds in east-
ern North Carolina by Colorado potato beetle. Entomologia Experimentalis et Applicata 68,
247256.
French, N.P., Wall, R., Cripps, P.J. and Morgan, K.L. (1992) Prevalence, regional distribution and con-
trol of blowy strike in England and Wales. Veterinary Record 131, 337342.
French, N.P., Wall, R. and Morgan, K.L. (1995) The seasonal pattern of sheep blowy strike in
England and Wales. Medical and Veterinary Entomology 9, 18.
Funderburk, J., Maruniak, J., Boucias, D. and Garcia-Canedo, A. (1992) Efcacy of baculoviruses and
their impact on pest management programs. In: Copping, L.G., Green, M.B. and Rees, R.T. (eds)
Pest Management in Soybean. Elsevier Applied Science, London and New York, pp. 8897.
Gabriel, T. (1989) Pest control, pest management and the human factor. Tropical Pest Management
35, 254256.
Gallun, R.L. (1980) Breeding for resistance in wheat. In: Harris, M.K. (ed.) Biology and Breeding for
Resistance to Arthropods and Pathogens in Agricultural Plants. Texas A & M University,
pp. 245262.
Gallun, R.L. and Khush, G.S. (1980) Genetic factors affecting the expression and stability of resis-
tance. In: Maxwell, F.G. and Jennings, P.R. (eds) Breeding Plants Resistant to Insects. John Wiley
and Sons, Chichester, pp. 6386.
Gardner, C.O. (1961) An evaluation of effects of mass selection and seed irradiation with thermal
neutrons on yield of corn. Crop Science 1, 241245.
Gardner, S.M. and Dixon, A.F.G. (1985) Plant structure and the foraging success of Aphidius
rhopalosiphi (Hymenoptera: Aphididae). Ecological Entomology 10, 171179.
Garforth, C. (1993) Extension techniques for pest management. In: Norton, G.A. and Mumford, J.D.
(eds) Decision Tools for Pest Management. CAB International, Wallingford, UK, pp. 247264.
Garguillo, P.M., Berisford, C.W., Canalos, C.G., Richmond, J.A. and Cade, S.C. (1984) Mathematical
descriptions of Rhyacionia frustrana (Lepidoptera: Tortricidae) cumulative catches in
pheromone traps, cumulative eggs hatching, and their use in timing of chemical control.
Environmental Entomology 13, 16811685.
Gash, A.F., Carter, N. and Bale, J.S. (1996) The inuence of nitrogen fertiliser applications on the
cereal aphids Metopolophium dirhodum and Sitobion avenae. Brighton Crop Protection
Conference: Pests and Diseases Volume 1. British Crop Protection Council, Farnham, UK,
pp. 209214.
Gass, S.I. (1975) Linear Programming. McGraw-Hill Book Company, New York.
Gatehouse, A.M.R., Hilder, V.A. and Boulter, D. (1992) Plant Genetic Manipulation for Crop
Protection. CAB International, Wallingford, UK.
Gatehouse, A.M.R., Davison, G.M., Newell, C.A., Merryweather, A., Hamilton, W.D.O., Burgess, E.P.J.,
Gilbert, R.J.C. and Gatehouse, J.A. (1997) Transgenic potato plants with enhanced resistance to
the tomato moth, Lacanobia oleracea: growth room trials. Molecular Breeding 3, 4963.
Gatehouse, A.M.R., Brown, D.P., Wilkinson, H.S., Down, R.E., Ford, L., Gatehouse, J.A., Bell, H.A.
and Edwards, J.P. (1998) The use of transgenic plants for the control of insect pests. In: Kerry,
B.R. (ed.) British Crop Protection Council Symposium Proceedings No. 71. Biotechnology in
Crop Protection: Facts and Fallacies. British Crop Protection Council, Farnham, UK, pp. 2533.
Gebre-Amlak, A., Sigvald, R. and Pettersson, J. (1989) The relationship between sowing date, infesta-
tion and damage by the maize stalk borer, Busseola fusca (Noctuidae), on maize in Awassa,
Ethiopia. Tropical Pest Management 36, 279281.
Gednalske, J.V. and Walgenbach, D.D. (1984) Effect of tillage practices on the emergence of
Smicronyx fulvus (Coleoptera: Curculionidae). Journal of Economic Entomology 77, 522524.
Geissbuhler, H. (1981) The agrochemical industrys approach to integrated pest control.
Philosophical Transactions of the Royal Society London B 295, 111123.
Georghiou, G.P. and Mellon, R.B. (1983) Pesticide resistance in time and space. In: Georghiou, G.P.
and Saito, T. (eds) Pest Resistance to Pesticides. Plenum Press, New York, pp. 146.
Georghiou, G.P. and Saito, T. (eds) (1983) Pest Resistance to Pesticides. Plenum Press, New York.
358 References
Insect Refs 11/7/00 9:29 am Page 358
Georgis, R. (1997) Commercial prospects of microbial insecticides in agriculture. In: Evans, H.F. (ed.)
British Crop Protection Council Symposium Proceedings No. 68. Microbial Insecticides: Novelty
or Necessity? British Crop Protection Council, Farnham, UK, pp. 241252.
Gerson, U. and Smiley, R.L. (1990) Acarine Biocontrol Agents, an Illustrated Key and Manual.
Chapman and Hall, New York, USA.
Getz, W.M. and Gutierrez, A.P. (1982) A perspective on systems analysis in crop production and
insect pest management. Annual Review of Entomology 27, 447466.
Gibson, R.W. (1971) Glandular hairs providing resistance to aphids in certain wild potato species.
Annals of Applied Biology 68, 113119.
Gilkeson, L.A. (1990) Cold storage of the predatory midge Aphidoletes aphidimyza (Diptera:
Cecidomyiidae). Journal of Economic Entomology 83, 965970.
Gilkeson, L.A. (1992) Mass rearing of phytoseiid mites for testing and commercial application. In:
Anderson, T.E. and Leppla, N.C. (eds) Advances in Insect Rearing for Research and Pest
Management. Westview Press, Boulder, Colorado, USA, pp. 489506.
Gillham, F., Bell, T., Arin, T., Matthews, G., le Rumeur, C. and Hearn, B. (1995) Cotton Production
Prospects for the Next Decade. World Bank, Washington DC.
Gilman, J.J. (1992) Inventivity The Art and Science of Research Management. Van Nostrand
Reinhold, New York, USA.
Givovich, A., Weibull, J. and Pettersson, J. (1988) Cowpea aphid performance and behaviour on two
resistant cowpea lines. Entomologia Experimentalis et Applicata 49, 259264.
Givovich, A., Morse, S., Cerda, H., Niemeyer, H.M., Wratten, S.D. and Edwards, P.J. (1992)
Hydroxamic acid glucosides in honeydew of aphids feeding on wheat. Journal of Chemical
Ecology 18, 841846.
Glen, D.M. and Brain, P. (1982) Pheromone-trap catch in relation to the phenology of codling moth
(Cydia pomonella). Annals of Applied Biology 101, 429440.
Goddard, R.E., Hollis, C.A., Kok, H.R., Rockwood, D.L. and Strickland, R.K. (1973) Co-operative for-
est genetics research programme. Research Report No. 21. 15th Annual Report. University of
Florida, School of Forest Resources and Conservation, pp. 119.
Godfray, H.C.J. and Waage, J.K. (1991) Predictive modelling in biological control: the mango mealy
bug (Tastrococcus invadens) and its parasitoids. Journal of Applied Ecology 28, 434453.
Gohler, A. (1989) Expert system cucumber. Acta Horticulture 248, 453457.
Goodell, G. (1984) Challenges to international pest management research and extension in the third
world: do we really want IPM to work? Bulletin of the Entomological Society of America 30, 1826.
Gouck, H.K., Meifert, D.W. and Gahan, J.B. (1963) A eld experiment with apholate as a chemosteri-
lant for the control of house ies. Journal of Economic Entomology 56, 445446.
Gouge, D.H. and Hague, N.G.M. (1993) Effects of Steinernema feltiae against sciarids infesting
conifers in a propagation house. Annals of Applied Biology 112(Supplement), 184185.
Gouge, D.H., Lee, L.L., van Berkum, J.R., Henneberry, T.J., Smith, K.A., Payne, C. and Ortega, D.
(1997) Control of pink bollworm, Pectinophora gossypiella (Saunders) (Lepidoptera:
Gelechiidae), with biocontrol and biorational agents. 1997 Proceedings: Beltwide Cotton
Conference. National Cotton Council of America, Memphis, USA, pp. 10661072.
Gould, H.J., Parr, W.J., Woodville, H.C. and Simmonds, S.P. (1975) Biological control of glasshouse
whitey (Trialeurodes vaporariorum) on cucumbers. Entomophaga 20, 285292.
Grace, J.K., Yates, J.R., Tome, C.H.M. and Oshiro, R.J. (1996) Termite-resistant construction: use of a
stainless steel mesh to exclude Coptotermes formosanus (Isoptera: Rhinotermitidae).
Sociobiology 28, 365372.
Graf, B., Baumgrtner, J. and Gutierrez, A.P. (1990) Modelling agroecosystem dynamics with the
metabolic pool approach. Itteilungen der Schweizerischen Entomologischen Gesellschaft 63,
465476.
Graf, B., Lamb, R., Heong, K.L. and Fabellar, L. (1992) A simulation model for the population dynam-
ics of rice leaf-folders (Lepidoptera: Pyralidae) and their interactions with rice. Journal of
Applied Ecology 29, 558570.
Graham, J., Gordon, S.C. and Williamson, B. (1996) Progress towards the use of transgenic plants as
an aid to control soft fruit pests and diseases. Brighton Crop Protection Conference 1996: Pests
and Diseases, Volume 3. British Crop Protection Council, Farnham, UK, pp. 777782.
Graham-Bryce, J.J. (1977) Crop protection: a consideration of the effectiveness and disadvantages of
References 359
Insect Refs 11/7/00 9:29 am Page 359
current methods and of the scope for improvement. Philosophical Transactions of the Royal
Society London B 281, 163179.
Gray, M.E., Levine, E. and Steffey, K.L. (1996) Western corn rootworms and crop rotation: have we
selected a new strain? Brighton Crop Protection Conference: Pests and Diseases, Volume 2.
British Crop Protection Council, Farnham, UK, pp. 653660.
Greathead, D.J. (1984) Biological control constraints to agricultural production. In: Hawksworth, D.L.
(ed.) Advancing Agricultural Production in Africa. Proceedings of Commonwealth Agricultural
Bureauxs 1st Scientic Conference. CAB International, Wallingford, UK, pp. 200206.
Greathead, D.J. (1986) Parasitoids in classical biological control. In: Waage, J. and Greathead, D. (eds)
Insect Parasitoids. Academic Press, London, pp. 289318.
Greathead, D.J. and Waage, J.K. (1983) Opportunities for biological control of agricultural pests in
developing countries. World Bank Technical Paper No. 11.
Greaves, M.P. and Marshall, E.J.P. (1987) Field margins: denitions and statistics. In: Way, J.M. and
Greig-Smith, P.W. (eds) British Crop Protection Council Monograph No. 35: Field Margins.
British Crop Protection Council, Farnham, UK, pp. 311.
Greenstone, M.H. (1996) Serological analysis of arthropod predation: past, present and future. In:
Symondson, W.O.C. and Liddell, J.E. (eds) The Ecology of Agricultural Pests. Chapman & Hall,
London, pp. 265300.
Greenstone, M.H. and Morgan, C.E. (1989) Predation on Heliothis zea: an instar-specic ELISA for
stomach analysis. Annals of the Entomological Society of America 84, 457464.
Grgoire, J.-C., Baisier, M., Merlin, J. and Naccache, Y. (1990) Interactions between Rhizophagus
grandis (Coleoptera: Rhizophagidae) and Dendroctonus micans (Coleoptera: Scolytidae) in the
eld and the laboratory. Their application for the biological control of D. micans in France. In:
Kulhavy, D. and Miller, M.C. (eds) The Potential of Biological Control of Dendroctonus and Ips
Bark Beetles. The Stephen Austin University Press, Nagocdoches, pp. 95108.
Grgoire, J.-C., Raty, L., Drumont, A. and de Windt, N. (1997) Pheromone mass trapping: does it pro-
tect windfalls from attack by Ips typographus L. (Coleoptera: Scolytidae)? In: Grgoire, J.C.,
Liebhold, A.M., Stephen, F.M., Day, K.R. and Salom, S.M. (eds) Integrating Cultural Tactics into
the Management of Bark Beetle and Reforestation Pests. USDA, Forest Service General
Technical Report NE-236, pp. 18.
Grifths, E. (1982) The carabid Agonum dorsale as a predator in cereals. Annals of Applied Biology
101, 143203.
Grifths, E., Wratten, S.D. and Vickerman, G.P. (1985) Foraging by the carabid Agonum dorsale in the
eld. Ecological Entomology 10, 181189.
Grifths, W.T. (1984) A review of the development of cotton pest problems in the Sudan Gezira. PhD
Dissertation, University of London.
Groth, E. (1991) Communicating with consumers about food safety and risk issues. Food Technology
45, 245253.
Guillon, M. (1997) Production of biopesticides: scale up and quality assurance. In: Evans, H.F. (ed.)
British Crop Protection Council Symposium Proceedings No. 68. Microbial Insecticides: Novelty
or Necessity?. British Crop Protection Council, Farnham, UK, pp. 151162.
Gunning, R.V. (1991) Measuring insecticide resistance. In: Zalucki, M.P. (ed.) Heliothis: Research
Methods and Prospects. Springer-Verlag, Berlin, pp. 151156.
Gunning, R.V., Easton, C.S., Balfe, M.E. and Ferris, I.G. (1991) Pyrethroid resistance mechanisms in
Australian Helicoverpa armigera. Pesticide Science 33, 473490.
Gurr, G.M., Wratten, S.D. and van Emden, H.F. (1998) Habitat manipulation and natural enemy ef-
ciency: implications for the control of pests. In: Barbosa, P. (ed.) Conservation Biocontrol.
Academic Press, New York.
Guthrie, W.D. (1980) Breeding for resistance to insects in corn. In: Harris, M.K. (ed.) Biology and
Breeding for Resistance to Arthropods and Pathogens in Agricultural Plants. Texas A & M
University, pp. 290302.
Gutierrez, A.P. (1987) Systems analysis in integrated pest management. In: Delucchi, V. (ed.)
Integrated Pest Management, Protection Integre: Quo Vadis? An International Perspective.
Parasitis 86, Geneva, pp. 7184.
Gutierrez, A.P. (1995) Integrated pest management in cotton. In: Dent, D.R. (ed.) Integrated Pest
Management. Chapman & Hall, London.
360 References
Insect Refs 11/7/00 9:29 am Page 360
Gutierrez, A.P., Butler, G.D. Jr., Wang, Y.H. and Westphal, D.F. (1977) The interaction of pink boll-
worm (Lepidoptera: Gelichiidae) cotton and weather: a detailed model. Canadian Entomologist
4, 125136.
Gutierrez, A.P., Pizzamiglio, M.A., Dos Santos, W.J., Tennyson, R. and Villacorta, A.M. (1984) A gen-
eral distributed delay time varying life table plant population model, cotton (Gossypium hirsu-
tum L.) growth and development as an example. Ecological Modelling 26, 131149.
Gutierrez, A.P., Schulthess, F., Wilson, L.T., Villacorta, A.M., Ellis, C.K. and Baumgrtner, J.U. (1987)
Energy acquisition and allocation in plants and insects, a hypothesis for the possible role of hor-
mones in insect feeding patterns. Canadian Entomologist 119, 109129.
Gutierrez, A.P., Wermelinger, B., Schulthess, F., Baumgrtner, J.U., Herren, H.R., Ellis, C.K. and
Yaninek, J.S. (1988a) Analysis of biological control of cassava pests in Africa. I. Simulation of
carbon, nitrogen and water dynamics in cassava. Journal of Applied Ecology 25, 901920.
Gutierrez, A.P., Neuenschwander, P., Schulthess, F., Herren, H.R., Baumgrtner, J.U., Wermelinger, B.,
Lhr, B. and Ellis, C.K. (1988b) Analysis of biological control of cassava pests in Africa. II.
Cassava mealybug Phenococcus manihoti. Journal of Applied Ecology 25, 921940.
Gutierrez, A.P., Yaninek, J.S., Wermelinger, B., Herren, H.R. and Ellis, C.K. (1988c) Analysis of bio-
logical control of cassava pests in Africa. III. Cassava green mite Mononychellus tanajoa. Journal
of Applied Ecology 25, 941950.
Gutierrez, A.P., Neuenschwander, P. and van Alphen, J.J.M. (1994) Factors affecting biological control
of cassava mealybug by exotic parasitoids: a ratio-dependent supply-demand driven model.
Journal of Applied Ecology 30, 706721.
Gutridge, C.G. (1958) The effects of winter chilling on the subsequent growth and development of the
cultivated strawberry. HortScience 33, 119127.
Hadaway, A.B. and Barlow, F. (1950) Studies of aqueous suspensions of insecticides. Bulletin of
Entomological Research 41, 603622.
Hagen, A.F. (1982) Labops hesperius (Hemiptera: Miridae) management in crested wheatgrass by
haying: an eight-year study. Journal of Economic Entomology 75, 706707.
Hagen, J.S., Sawall, E.F. Jr. and Tassan, R.L. (1971) Use of food sprays to increase effectiveness of
entomophagous insects. Proceedings of the Tall Timbers Conference on Ecological Animal
Control by Habitat Management. Tallahassee, Florida, USA, pp. 5981.
Hagler, J.R., Brower, A.G., Zhijian Tu, Byrne, D.N., Bradley-Dunlop, D. and Enriques, F.J. (1993)
Development of a monoclonal antibody to detect predation of the sweetpotato whitey, Bemisia
tabaci (Gennadius). Entomologia Experimentalis et Applicata 68, 321326.
Hagley, E.A.C. and Simpson, C.M. (1981) Effect of food sprays on numbers of predators in an apple
orchard. Canadian Entomologist 113, 7577.
Hagstrum, D.W. and Flinn, P.W. (1990) Simulations comparing insect species differences in response to
wheat storage conditions and management practices. Journal of Economic Entomology 24692475.
Hgvar, E.B. and Hfsvang, T. (1991) Aphid parasitoids (Hymenoptera: Aphididae): Biology, host
selection and use in biological control. Biocontrol News and Information 12, 1341.
Hall, R.A. and Papierok, B. (1982) Fungi as biological control agents of arthropods of agricultural and
medical importance. Parasitology 84, 205240.
Hall, R.W. and Ehler, L.E. (1979) Rate of establishment of natural enemies in classical biological con-
trol. Bulletin of the Entomological Society of America 25, 280282.
Hallahan, D.L., Pickett, J.A., Wadham, L.J., Wallsgrove, R.M. and Woodcock, C.M. (1992) Potential of
secondary metabolites in genetic engineering of crops for resistance. In: Gatehouse, A.M.R.,
Hilder, V.A. and Boulter, D. (eds) Plant Genetic Manipulation for Crop Protection. CAB
International, Wallingford, UK, pp. 215247.
Hammond, R.B. (1995) Timing of plowing and planting: effects on seedcorn maggot populations in
soybean. Crop Protection 14, 471477.
Hammond, R.B. (1996) Residual activity of Lambda-cyhalothrin against bean leaf beetle (Coleoptera:
Chrysomelidae) in soybeans. Journal of Agricultural Entomology 13, 365373.
Hammond, R.B. (1997) Long-term conservation tillage studies: impact of no-till on seed corn maggot
(Diptera: Anthomyiidae). Crop Protection 16, 221225.
Hammond, R.B., Pedigo, L.P. and Poston, F.L. (1979) Green clover-worm leaf consumption on green-
house and eld soybean leaves and development of a leaf-consumption model. Journal of
Economic Entomology 72, 102107.
References 361
Insect Refs 11/7/00 9:29 am Page 361
Hammond, R.B., Bledsoe, L.W. and Anwar, M.N. (1995) Maturity and environmental effects on soy-
beans resistant to Mexican bean beetle (Coleoptera: Coccinellidae). Journal of Economic
Entomology 88, 175181.
Haniotakis, G., Kozyrakis, M. and Fitsakis, T. (1991) An effective mass trapping method for the con-
trol of Dacus oleae (Diptera: Tephritidae). Journal of Economic Entomology 84, 564569.
Hanover, J.W. (1980) Breeding forest trees resistant to insects. In: Maxwell, F.G. and Jennings, P.R.
(eds) Breeding Plants Resistant to Insects. John Wiley and Sons, Chichester, pp. 487512.
Hanson, C.H., Busbice, T.H., Hill, R.R., Hunt, O.J. and Oaks, A.J. (1972) Directed mass selection for
developing pest resistance and conserving germplasm in alfalfa. Journal of Environmental
Quality 1, 106111.
Harder, H.H., Riley, S.L., McCann, S.F. and Irving, S.N. (1996) DPX-MP062: a novel broad-spectrum,
environmentally soft, insect control compound. Brighton Crop Protection Conference: Pests and
Diseases, Volume 2. British Crop Protection Council, Farnham, UK, pp. 449454.
Hardie, J., Isaacs, R., Pickett, J.A., Wadhams, L.J. and Woodcock, C. M (1994) Methyl salicylate and
(-)-(1R,5S)-myrtenal are plant-derived repellents for black bean aphid, Aphis fabae Scop.
(Homoptera: aphididae). Journal of Chemical Ecology 20, 28472855.
Hardin, G. (1962) The tragedy of the commons. Science 162, 12431248.
Harlan, J.R. and Starks, K.J. (1980) Germplasm resources and needs. In: Maxwell, F.G. and Jennings,
P.R. (eds) Breeding Plants Resistant to Insects. John Wiley and Sons, Chichester, pp. 253275.
Harris, C.A. (1998) Food safety and pesticides residues: is there a problem? A regulators perspective.
The 1998 Brighton Conference: Pests and Diseases Volume 1. British Crop Protection Council,
Farnham, UK, pp. 465470.
Harris, F.A. (1997a) Transgenic B.t. cotton in the Mississippi Delta. IBCs 2nd Annual Conference on
Biopesticides and Transgenic Plants. International Business Communications, Southborough,
MA, USA.
Harris, J. and Dent, D.R. (1999) Priorities in Biopesticide R&D in Developing Countries. CAB
International, Wallingford, UK.
Harris, J.G. (1997b) Microbial insecticides an industry perspective. In: Evans, H.F. (ed.) British Crop
Protection Council Symposium Proceedings No. 68. Microbial Insecticides: Novelty or Necessity?
British Crop Protection Council, Farnham, UK, pp. 4152.
Harris, J.G. (1995) The efcacy of different strains of Bacillus thuringiensis for Diamondback Moth
control in south east Asia, and their strategic usage to combat resistance to chemical insecti-
cides, especially acyl urea compounds. In: Feng, T.-Y. (ed.) Bacillus thuringiensis Biotechnology
and Environmental Benets, Volume 1. Hua Shinag Yuan Publishing Company, Taipei, Taiwan,
pp. 259268.
Harris, M.O., Rose, S. and Malsch, P. (1993) The role of vision in the host plant-nding behaviour of
the Hessian y. Physiological Entomology 18, 3142.
Harris, P. (1990) Environmental impact of introduced biological control agents. In: Mackauer, M.,
Ehler, L.E. and Roland, J. (eds) Critical Issues in Biological Control. Intercept, Andover,
pp. 289300.
Haskell, P.T. (1987) Natural selection in crop protection. In: Brent, K.J. and Atkin, R.K. (eds) Rational
Pesticide Use. Cambridge University Press, pp. 113.
Hassan, S.A. (1986) Side effects of pesticides to entomophagous arthropods. In: Franz, J.M. (ed.)
Biological Plant and Health Protection. Biological Control of Plant Pests and of Vectors of
Human and Animal Diseases. Gustav Fischer Verlag, Stuttgart and New York, pp. 8994.
Hassan, S.A. (1989) Testing methodology and the concept of the AIOBC/WPRS Working Group. In:
Jepson, P.C. (ed.) Pesticides and Non-target Invertebrates. Intercept, Wimborne, Dorset,
pp. 118.
Hassell, M.P. (1978) The Dynamics of Arthropod Predator-Prey Systems. Princeton University Press,
Princeton, New Jersey.
Hassell, M.P. (1980) Foraging strategies, population models and biological control: a case study.
Journal of Animal Ecology 49, 603628.
Hassell, M.P. (1982) Patterns of parasitism by insect parasitoids in patchy environments. Ecological
Entomology 7, 365377.
Hassell, M.P. (1984) Host-parasitoid models and biological control. In: Conway, G.R. (ed.) Pest and
Pathogen Control: Strategic, Tactical and Policy Models. John Wiley & Sons, Chichester, pp. 7392.
362 References
Insect Refs 11/7/00 9:29 am Page 362
Hassell, M.P. and Anderson, R.M. (1984) Host susceptibility as a component in host-parasitoid sys-
tems. Journal of Animal Ecology 53, 611621.
Hassell, M.P. and May, R.M. (1973) Stability in insect host-parasite models. Journal of Animal
Ecology 42, 693726.
Hassell, M.P. and Rogers, D.J. (1972) Insect parasite responses in the development of population
models. Journal of Animal Ecology 41, 661676.
Hassell, M.P. and Varley, G.C. (1969) A new inductive population model for insect parasites and its
bearing on biological control. Nature 223, 11331160.
Hassell, M.P. and Waage, J.K. (1984) Host-parasitoid population interactions. Annual Review of
Entomology 29, 89114.
Hassell, M.P., Waage, J.K. and May, R.M. (1983) Variable parasitoid sex ratios and their effect on host-
parasitoid dynamics. Journal of Animal Ecology 52, 889904.
Hayes, J.L. and Bell, M.R. (1994) Evaluation of early-season baculovirus treatment for suppression of
Heliothis virescens and Helicoverpa zea (Lepidoptera: Noctuidae) over a wide area. Journal of
Economic Entomology 87, 5866.
Hayes, J.L. and Strom, B.L. (1994) 4-allyanisole as an inhibitor of bark beetle (Coleoptera: Scolytidae)
aggregation. Journal of Economic Entomology 87, 15861594.
Hayes, J.L., Strom, B.L., Roton, L.M. and Ingram, L.L. (1994) Repellent properties of the host com-
pound 4-allylanisole to the southern pine beetle. Journal of Chemical Ecology 20, 15951615.
Hayes, J.L., Meeker, J.R., Foltz, J.L. and Strom, B.L. (1996) Suppression of bark beetles and protection
of pines in the urban environment: a case study. Journal of Arboriculture 22, 6774.
Head, G., Hoy, C.W. and Hall, F.R. (1995) Inuence of permethrin droplets on movement of larval
Plutella xylostella (Lepidoptera: Plutellidae). Pesticide Science 45, 271278.
Head, J., Baker, R.H.A. and Jarvis, C.H. (1998) Utilising computer models to determine the risk of out-
breaks of gypsy moth, Lymantria dispar, to the UK amenity tree industry. Proceedings 1998
British Crop Protection Conference Pests and Diseases. British Crop Protection Council,
Farnham, UK, pp. 823828.
Hearn, J.W., van Coller, L.M. and Conlong, D.E. (1994) Determining strategies for the biological con-
trol of a sugarcane stalk borer. Ecological Modelling 73, 117133.
Heidari, M. and Copland, M.J.W. (1993) Honeydew: a food resource or arrestant for the mealybug
predator Cryptolaemus montrouzieri? Entomophaga 38, 6368.
Heinrichs, E.A. (1986) Perspectives and directions for the continued development of insect-resistant
rice varieties. Agricultural Ecosystems and Environments 18, 936.
Heinz, K.M. and Parrella, M.P. (1994) Biological control of Bemisia argentifolii (Homoptera:
Aleyrodidae) infesting Euphorbia pulcherrima: evaluations of releases of Encarsia luteola
(Hymenoptera: Aphelinidae) and Delphastus pusillus (Coleoptera: Coccinellidae).
Environmental Entomology 23, 13461353.
Heinz, K.M. and Zalom, F.G. (1995) Variation in trichome-based resistance to Bemisia argentifolii
(Homoptera: Aleyrodidae) oviposition on tomato. Journal of Economic Entomology 88,
14951502.
Helm, C.G., Kogan, M., Onstad, D.W., Wax, L.M. and Jeffords, M.R. (1992) Effects of velvetleaf com-
petition and defoliation by soybean looper (Lepidoptera: Noctuidae) on yield of indeterminate
soybean. Journal of Economic Entomology 85, 24332439.
Helsen, H. and Blommers, L.H.M. (1992) Integrated decision models in apple IPM: the codling moth
as an example. Acta Phytopathological Entomology 27, 271276.
Hemingway, J., Lindsay, S.W., Small, G.J., Jawara, M. and Collins, F.H. (1995) Insecticide susceptibility
status in individual species of the Anopheles gambiae complex where pyrethroid impregnated
bednets are used extensively for malaria control. Bulletin of Entomological Research 85, 229234.
Henshaw, M.D., Brown, J.E. and Griffey, W.A. (1991) Use of reective mulches in control of mosaic
viruses in summer squash. Proceedings of the 23rd National Agricultural Plastics Congress,
pp. 7887.
Heong, K.L. (1985) Systems analysis in solving pest management problems. In: Lee, B.S., Loke, W.H.
and Heong, K.L. (eds) Integrated Pest Management in Malaysia. The Malaysian Plant Protection
Society, Kuala Lumpur, pp. 13350.
Heong, K.L., Aquino, G.B. and Barrion, A.T. (1991) Arthropod community structures of rice ecosys-
tems in the Philippines. Bulletin of Entomological Research 81, 407416.
References 363
Insect Refs 11/7/00 9:29 am Page 363
Herbert, D.A., Mack, T.P., Backman, P.A. and Rodriguez-Kabana, R. (1992) Validation of a model for
estimating leaf feeding by insects in soybean. Crop Protection 11, 2733.
Herren, H.R. and Neuenschwander, P. (1991) Biological control of cassava pests in Africa. Annual
Review of Entomology 36, 257284.
Hessayon, D.G. (1983) Risk do the public, press and politicians really care? 10th International
Congress of Plant Protection 1983, Plant Protection for Human Welfare, Brighton, Volume 2,
pp. 663669.
Herzog, D.C. and Funderburk, J.E. (1986) Ecological bases for habitat manipulation. In: Kogan, M.
(ed.) Ecological Theory and Integrated Pest Management Practice. John Wiley, New York, USA,
pp. 217250.
Hickman, J.M., Lvei, G.L. and Wratten, S.D. (1995) Pollen feeding by adults of the hovery
Melanostoma fasciatum (Diptera: Syrphidae). New Zealand Journal of Zoology 22, 387392.
Higley, L.G. and Wintersteen, W.K. (1992) A new approach to environmental risk assessment of pesti-
cides as a basis for incorporating environmental costs into economic injury levels. American
Entomologist 38, 3439.
Hilder, V.A., Gatehouse, A.M.R., Sheerman, S.E., Barker, R.F. and Boutler, D. (1987) A novel mecha-
nism of insect resistance engineered in tobacco. Nature 300, 160163.
Hill, D.S. (1983) Agricultural Insect Pests of the Tropics and their Control, 2nd edn. Cambridge
University Press, Cambridge.
Hill, D.S. and Waller, J.M. (1982) Pests and Diseases of Tropical Crops. Volume 1: Principles and
Methods of Control. Longman, London and New York.
Hill, J.E. (1998) Public concerns over the use of transgenic plants in the protection of crops from
pests and diseases and government responses. In: Kerry, B.R. (ed.) British Crop Protection
Council Symposium Proceedings No. 71. Biotechnology in Crop Protection: Facts and Fallacies.
British Crop Protection Council, Farnham, UK, pp. 5765.
Hill, L. (1993) Colour in adult Helicoverpa punctigera (Wallengren) (Lepidoptera: Noctuidae) as an
indicator of migratory origin. Journal of the Australian Entomological Society 32, 145151.
Hillman, J.R. (1998) 1993 Bio-engineering intellect, enterprise and opportunity. In: Lewis, T. (ed.)
The Bawden Memorial Lectures. British Crop Protection Council, Farnham, UK, pp. 249261.
Hillocks, R.J. (1995) Integrated management of insect pests, diseases and weeds of cotton in Africa.
Integrated Pest Management Reviews 1, 3147.
Hodges, R.J. and Surendro (1996) Detection of controlled atmosphere changes in CO
2
-ushed sealed
enclosures for pest and quality management of bagged milled rice. Journal of Stored Product
Research 32, 97104.
Hokkanen, H.M.T. (1991) Trap cropping in pest management. Annual Review of Entomology 36,
119138.
Hokkanen, H.M.T. and Pimentel, D. (1984) New approach for selecting biological control agents.
Canadian Entomologist 116, 11091121.
Holt, J. and Cheke, R.A. (1997) Modelling. In: Dent, D.R. and Walton, M.P. (eds) Methods in
Ecological and Agricultural Entomology. CAB International, Wallingford, UK, pp. 351378.
Holt, J. and Norton, G.A. (1993) Simulation models. In: Norton, G.A. and Mumford, J.D. (eds)
Decision Tools for Pest Management. CAB International, Wallingford, UK, pp. 119146.
Holt, J. and Wratten, S.D. (1986) Components of resistance to Aphis fabae in faba bean cultivars.
Entomologia Experimentalis et Applicata 40, 3540.
Holt, J., Cook, A.G., Perfect, T.J. and Norton, G.A. (1987) Simulation analysis of brown planthopper
(Nilaparvata lugens) population dynamics on rice in the Philippines. Journal of Applied
Ecology 24, 87102.
Holt, J., King, A.B.S. and Armes, N.J. (1990) Use of simulation analysis to assess Helicoverpa
armigera control on pigeonpea in southern India. Crop Protection 9, 197206.
Holt, J., Wareing, D.R. and Norton, G.A. (1992) Strategies of insecticide use to avoid resurgence of
Nilaparvata lugens (Homoptera: Delphacidae) in tropical rice: A simulation analysis. Journal of
Economic Entomology 85, 19791989.
Hommes, M., Hurni, B., Van de Steen, F. and Vanparys, L. (1994) Action thresholds for pests of leek
results from the co-operative experiment. In: Finch, S. and Brunel, E. (eds) International Control
in Field Vegetable Crops. IOBC wprs Bulletin Vol. 17, pp. 6774.
Hong, T.D., Jenkins, N.E., Ellis, R.H. and Moore, D. (1998) Limits to the negative logarithmic relation-
364 References
Insect Refs 11/7/00 9:29 am Page 364
ship between mositure content and longevity in conidia of Metarhizium avoviride. Annals of
Botany 81, 625630.
Hopper, K.R., Roush, R.T. and Powell, W. (1993) Management of genetics of biological control intro-
ductions. Annual Review of Entomology 38, 2751.
Horn, D.J. (1988) Ecological Approach to Pest Management. Elsevier Applied Science Publishers,
London.
Horsch, R.B., Fry, J.E., Hoffman, N.L., Eichholtz, D., Rogers, S.G. and Fraley, R.T. (1985) A simple and
general method for transferring genes into plants. Science 227, 12291231.
Hrstadius, S. (1974) Lennaeus, animals and man. Biological Journal of the Linnaean Society 6,
269275.
Howard, J. and Wall, R. (1996a) Autosterilization of the house y, Musca domestica (Diptera:
Muscidae) in poultry houses in north-east India. Bulletin of Entomological Research 86,
363367.
Howard, J. and Wall, R. (1996b) Control of the house y, Musca domestica, in poultry units: current
techniques and future prospects. Agricultural Zoology Reviews 7, 247265.
Howard, L.O. (1930) A History of Applied Entomology. Smithsonian Institute, Washington, D.C.,
USA.
Howell, J.F., Knight, A.L., Unruh, T.R., Brown, D.F., Krysan, J.L., Sell, C.R. and Kirsch, P.A. (1992)
Control of codling moth in apple and pear with sex pheromone-mediated mating disruption.
Journal of Economic Entomology 85, 918925.
Howse, P.E., Stevens, I.D.R. and Jones, O.T. (eds) (1998) Insect Pheromones and their Use in Pest
Management. Chapman and Hall, London, UK.
Hoy, J.B., Kauffman, E.E. and OBerg, A.G. (1972) A large-scale eld test of Gambusia afnis and
chlorpyrifos for mosquito control. Mosquito News 32, 161171.
Hoy, M.A. (1985) Improving establishment of arthropod natural enemies. In: Hoy, M.A. and Herzog,
D.C. (eds) Biological Control in Agricultural IPM Systems. Academic Press, Orlando and
London, pp. 151166.
Hsiao, T.H. (1969) Chemical basis of host selection and plant resistance in oligophagous insects.
Entomologia Experimentalis et Applicata 12, 777788.
Huffaker, C.B. (1958) Experimental studies on predation: dispersion factors and predator-prey oscil-
lations. Hilgardia 27, 343383.
Huffaker, C.B. (1985) Biological control in integrated pest management: an entomological perspec-
tive. In: Hoy, M.A. and Herzog, D.C. (eds) Biological Control in Agricultural IPM Systems.
Academic Press, Orlando and London, pp. 1324.
Huffaker, C.B. and Kennett, C.E. (1969) Some aspects of assessing efciency of natural enemies.
Canadian Entomologist 101, 425447.
Huffaker, C.B., Messenger, P.S. and DeBach, P. (1971) The natural enemy component in natural con-
trol and the theory of biological control. In: Huffaker, C.G. (ed.) Biological Control. Plenum
Press, New York and London, pp. 1667.
Hughes, G. (1988) Models of crop growth. Nature 332, 16.
Hull, L.A. and Beers, E.H. (1985) Ecological selectivity: modifying chemical control practices to pre-
serve natural enemies. In: Hoy, M.A. and Herzog, D.C. (eds) Biological Control in Agricultural
IPM Systems. Academic Press, Orlando and London, pp. 103122.
Hull, L.A. and Starner, R. van (1983) Effectiveness of insecticide applications timed to correspond
with the development of rosy apple aphid (Homoptera: Aphididae) on apple. Journal of
Economic Entomology 76, 594598.
Hulspas-Jordan, P.M. and van Lenteren, J.C. (1989) The parasite-host relationship between Encarsia
formosa (Hymenoptera: Aphelinidae) and Trialeurodes vaporariorum (Homoptera Aleyrodidae).
XXX. Modelling population growth of greenhouse whitey on tomato. Agricultural University of
Wageningen Paper 89, 154.
Hunt, R. (1978) Plant Growth Analysis, Studies in Biology No. 96. Edward Arnold, London.
Hunt, R. (1982) Plant Growth Curves, the Functional Approach to Plant Growth Analysis. Edward
Arnold, London.
Hunter, K. (1995) The poisoning of non-target animals. In: Best, G.A. and Ruthven, A.D. (eds)
Pesticides Developments, Impacts, and Controls. The Royal Society of Chemistry, London, UK,
pp. 7486.
References 365
Insect Refs 11/7/00 9:29 am Page 365
Husain, M.A. and Lal, K.B. (1940) The bionomics of Empoasca devastans Distant on some varieties
of cotton in the Punjab. Indian Journal of Entomology 2, 123136.
Hussey, N.W. and Bravenboaer, L. (1971) Control of pests in glasshouse culture by the introduction of
natural enemies. In: Huffaker, C.G. (ed.) Biological Control. Plenum Press, New York and
London, pp. 195216.
Hutchins, S.H. and Pedigo, L.P. (1989) Potato leafhopper-induced injury on growth and development
of alfalfa. Crop Science 29, 10051011.
Huus-Brown, T. (1992) Field vegetables in Denmark: an example of the role of the Danish Advisory
Service in reducing insecticide use. In: van Lenteren, J.C., Minks, A.K. and de Ponti, O.M.B.
(eds) Biological Control and Integrated Crop Protection: Towards Environmentally Safer
Agriculture. Pudoc Scientic Publishers, Wageningen, The Netherlands, pp. 201207.
ICRISAT (International Crops Research Institute for the Semi-Arid Tropics) (1989) Annual Report
1988. ICRISAT, Patancheru, India.
Ignoffo, C.M. and Couch, T.L. (1981) The nucleopolyhedrosis virus of Heliothis species as a micro-
bial insecticide. In: Burgess, H.E. (ed.) Microbial Control of Pests and Plant Diseases 19701980.
Academic Press, London, pp. 330362.
Iles, M.J. and Sweetmore, A. (eds) (1991) Constraints on the Adoption of IPM in Developing
Countries A Survey. Natural Resources Institute, Kent, UK.
Ilse, D. (1937) New observations on responses to colours in egg laying butteries. Nature 40, 544545.
Ingram, W.R. (1980) Studies of the pink bollworm, Pectinophora gossypiella on sea island cotton in
Barbados. Tropical Pest Management 26, 118137.
Ishaaya, I., Yablonski, S., Mendelson, Z., Mansour, Y. and Horowitz, A.R. (1996) Novaluron (MCW-
275), a novel benzoylphenyl urea, suppressing developing stages of lepidopteran, whitey and
agromyzid leafminer pests. The 1996 Brighton Conference: Pests and Diseases Volume 3. British
Crop Protection Council, Farnham, UK, pp. 10131020.
Ishaaya, I., Damme, N. and Tirry, L. (1998) Novaluron, optimisation and use for the control of the
beet armyworm and the greenhouse whitey. The 1998 Brighton Conference: Pests and Diseases
Volume 1. British Crop Protection Council, Farnham, UK, pp. 4956.
Ishimoto, M., Sato, T., Chrispeels, M.J. and Kitamura, K. (1996) Bruchid resistance of transgenic
azuki bean expressing seed a-amylase inhibitor of common bean. Entomologia Experimentalis et
Applicata 79, 309315.
Ismail, A.B. and Valentine, J. (1983) The efciency of visual assessment of grain yield and its compo-
nents in spring barley rows. Annals of Applied Biology 102, 539549.
Ives, C.L., Bedford, B.M. and Maredia, K.M. (1998) The agricultural biotechnology for sustainable
productivity project: a new model in collaborative development. In: Ives, C.L. and Bedford, B.M.
(eds) Agricultural Biotechnology in International Development. CAB International, Wallingford,
UK, pp. 114.
Ives, P.M. (1981) Estimation of coccinellid numbers and movement in the eld. The Canadian
Entomologist 113, 981997.
Jackai, L.E.N. (1982) A eld screening technique for resistance of cowpea (Vigna unguiculata) to the
pod-borer Maruca testulalis (Geyer) (Lepidoptera: Pyralidae). Bulletin of Entomological
Research 72, 145156.
Jackai, L.E.N. (1984) Using trap plants in the control of insect pests of tropical legumes. Proceedings
of the International Workshop on Integrated Pest Control of Grain Legumes, Goiania, Goias,
Brasil. Dep. Difus. Technol. EMBRAPA, Brasilia, Brasil, pp. 101112.
Jackai, L.E.N. (1991) Laboratory and screenhouse assays for evaluating cowpea resistance to the
legume pod borer. Crop Protection 10, 4852.
Jackson, R.D. and Lewis, W.J. (1981) Summary of signicance and employment strategies for semio-
chemicals. In: Nordlund, D.A., Jones, R.L. and Lewsi, W.J. (eds) Semiochemicals, their Role in
Pest Control. John Wiley & Sons, Chichester, pp. 283296.
Jager, C.M. de, Butt, R.P.T., Klinkhamer, P.G.L., Jong, T.J. de, Wolff, K. and Meijden, E. van der
(1995) Genetic variation in chrysanthemum for resistance to Frankliniella occidentalis.
Entomologia Experimentalis et Applicata 77, 277287.
Jager, C.M. de, Butt, R.P.T., Meijden, E. van der and Verpoorte, R. (1996) The role of primary and
secondary metabolites in chrysanthemum resistance to Frankliniella occidentalis. Journal of
Chemical Ecology 22, 19871999.
366 References
Insect Refs 11/7/00 9:29 am Page 366
James, H.G. (1966) Insect predators of univoltine mosquitoes in woodland pools of the Recambrian
shield in Ontario. Canadian Entomologist 98, 550555.
Jay, C.N. and Cross, J.V. (1998) Monitoring and predicting the development of summer fruit tortrix
moth, Adoxophyes orana, larvae in spring in the UK as an aid to the timing of fenoxycarb appli-
cations. Proceedings 1998 British Crop Protection Conference Pests and Diseases. British Crop
Protection Council, Farnham, UK, pp. 833836.
Jenkins, N.E., Heviefo, G., Langewald, J., Cherry, A.J. and Lomer, C.J. (1998) Development of mass
production technology for aerial conidia of mitosporic fungi for use as mycopesticides.
Biocontrol News and Information 19, 2131.
Jepson, L.R., McMurty, J.A., Mead, D.W., Jesser, M.J. and Johnson, H.G. (1975) Toxicity of
citrus pesticides to some predaceous phytoseiid mites. Journal of Economic Entomology 68,
707710.
Jepson, P.C. (1987) An experimental rationale for the quantitative evaluation of pesticide side effects
on benecial insects in cereal crops. IOBC/WPRS Bulletin 10, 206215.
Jervis, M.A. and Copeland, M.J.W. (1996) The life cycle. In: Jervis, M.A. and Kidd, N.A.C. (eds) Insect
Natural Enemies. Chapman & Hall, London, pp. 63161.
Jervis, M.A. and Kidd, N.A.C. (1986) Host feeding strategies in hymenopteran parasitoids. Biological
Reviews 61, 395434.
Jin, W-G., Sun, G-H. and Xu, Z-M. (1996) A new broad-spectrum and highly active pyrethroid ZXi
8901. Brighton Crop Protection Conference: Pests and Diseases, Volume 2. British Crop
Protection Council, Farnham, UK, pp. 455460.
John, J.A. and Quenoulille, M.H. (1977) Experiments: Design and Analysis. Charles Grifn and
Company Limited, London.
John, P.W.M. (1971) Statistical Design and Analysis of Experiments. Macmillan Company, New York.
Johnson, C.G., (1950) The comparison of suction trap and tow-net for the quantitative sampling of
small airborne insects. Annals of Applied Biology 37, 268285.
Johnson, D.A. and Gilmore, E.C. (1980) Breeding for resistance to pathogens in wheat. In: Harris,
M.K. (ed.) Biology and Breeding for Resistance to Arthropods and Pathogens in Agricultural
Plants. Texas A & M University, pp. 263275.
Johnson, D.L. and Worsbec, A. (1988) Spatial and temporal computer analysis of insects and weather:
grasshoppers and rainfall in Alberta. Memorandum of the Entomological Society of Canada 146,
3348.
Johnson, J.E. and Blair, E.C. (1972) Cost, time and pesticide safety. Chemical Technology (Nov),
666669.
Johnson, J.W. and Teetes, G.L. (1980) Breeding for arthropod resistance in sorghum. In: Harris, M.K.
(ed.) Biology and Breeding for Resistance to Arthropods and Pathogens in Agricultural Plants.
Texas A & M University, pp. 168180.
Johnson, R., Narvaez, J., An, G. and Ryan, C. (1989) Expression of proteinase inhibitors I and II in
transgenic tobacco plants: Effects on natural defence against Manduca sexta larvae. Proceedings
National Academy Sciences, USA 86, 98719875.
Johnson, T.B., Turpin, F.T., Schreiber, M.M. and Grifth, D.R. (1984) Effects of crop rotation, tillage,
and weed management systems on black cutworm (Lepidoptera: Noctuidae) infestations in corn.
Journal of Economic Entomology 77, 919921.
Johnstone, D.R. (1973) Physics and meteorology. In: Haskell, P.T. (ed.) Pesticide Application:
Principles and Practice. Clarendon Press, Oxford, UK, pp. 3567.
Jokela, J.J. (1966) Incidence and heritability of Melampsora rust in Populus deltoides. In: Gerhold,
H.D. (ed.) Breeding Pest Resistant Trees. Pergamon, Oxford, pp. 111117.
Jones, H.G. (1983) Plants and Microclimate. A Quantitative Approach to Environmental Physiology.
Cambridge University Press, Cambridge.
Jones, K.A. and Burgess, H.D. (1998) Principles of formulation. In: Burges, H.D. (ed.) Formulation of
Microbial Biopesticides, Benecial Micro-organisms and Nematodes. Chapman & Hall, London,
UK.
Jones, O. and Langley, P. (1998) Target technology bring the insect to the insecticide not the insecti-
cide to the insect. The 1998 Brighton Conference: Pests and Diseases Volume 1. British Crop
Protection Council, Farnham, UK, pp. 433440.
Jones, T.H., Young, J.E.B., Norton, G.A. and Mumford, J.D. (1990) An expert system for the manage-
References 367
Insect Refs 11/7/00 9:29 am Page 367
ment of wheat bulb y Delia coaractata (Diptera: Anthomyiidae) in the United Kingdom.
Journal of Economic Entomology 83, 20632072.
Josephson, L.M., Bennett, S.E. and Burgess, E.E. (1966) Methods of articially infesting corn with the
corn earworm and factors inuencing resistance. Journal of Economic Entomology 59,
13221324.
Joyce, R.J.V. and Roberts, P. (1959) The determination of the size of plot suitable for cotton spraying
experiments in the Sudan Gezira. Annals of Applied Biology 47, 287305.
Judenko, E. (1972) The assessment of economic losses in yield of annual crops caused by pests, and
the problem of the economic threshold. PANS 18, 186191.
Kahn, R.P. (1977) Plant quarantine: principles, methodology and suggested approaches. In: Hewitt,
W.B. and Chiarappa, L. (eds) Plant Health and Quarantine in International Transfer of Plant
Genetic Resources. CRC Press, Boca Raton, USA, pp. 289307.
Kahn, R.P. (1982) The host as a vector, exclusion as a control. In: Harris, K. and Maramorsch, K. (eds)
Pathogens, Vectors, and Plant Diseases. Academic Press, New York, USA, pp. 123149.
Kahn, R.P. (1983) Safeguarding the international exchange of plant germplasm. 10th International
Congress of Plant Protection, Plant Protection for Human Welfare, Brighton, Volume 2. British
Crop Protection Council, Farnham, UK, pp. 517.
Kakehashi, N., Suzuki, Y. and Iwasa, Y. (1984) Niche overlap of parasitoids in host-parasitoid sys-
tems: its consequence to single versus multiple introduction controversy in biological control.
Journal of Applied Ecology 21, 115131.
Karlf, B. (1987) Business Strategy in Practice. John Wiley & Sons, New York, USA.
Kay, C.A.R., Veaszey, J.N. and Whitcomb, W.H. (1977) Effects of date of soil disturbance on numbers
of adult eld crickets (Orthoptera: Gryllidae) in Florida. Canadian Entomologist 109, 721726.
Kaya, H.K. (1985) Entomogenous nematodes for insect control in IPM systems. In: Hoy, M.A. and
Herzog, D.C. (eds) Biological Control in Agricultural IPM Systems. Academic Press, Orlando and
London, pp. 283302.
Kaya, H.K. (1987) Diseases caused by nematodes. In: Fuxa, J.R. and Tanada, Y. (eds) Epizootiology of
Insect Diseases. John Wiley & Sons, Chichester, pp. 453470.
Keerthisinghe, C.I. (1982) Economic thresholds for cotton pest management in Sri Lanka. Bulletin of
Entomological Research 72, 239246.
Kenmore, P.E., Heong, K.L. and Putter, C.A.J. (1985) Political, social and perceptual factors in inte-
grated pest management programmes. In: Lee, B.S., Loke, W.H. and Heong, K.L. (eds) Integrated
Pest Management in Malaysia. The Malaysian Plant Protection Society, Kuala Lumpur,
pp. 4766.
Kennedy, G.G., Gould, F. de Ponti, O.M.B. and Stinner, R.E. (1987) Ecological, agricultural, genetic,
and commercial considerations in the deployment of insect resistant germplasm. Environmental
Entomology 16, 327338.
Kennedy, J.S. (1985) Migration, behavioural and ecological. In: Rankin, M.A. (ed.) Migration:
Mechanisms and Adaptive Signicance. Contributions in Marine Science, 27 (Supplement),
526.
Kennedy, J.S., Booth, C.O. and Kershaw, W.J.S. (1961) Host nding by aphids in the eld (III) Visual
attraction. Annals of Applied Biology 49, 121.
Kr, R. (1981) Fertility of the polyembryonic parasite Copidosoma koehleri, effect of humidities on
life length and relative abundance as compared with that of Apanteles subandinus in potato
tuber moth. Annals of Applied Biology 99, 225230.
Khan, Z.R., Ampong-Nyarko, K., Chiliswa, P., Hassanali, A., Kimani, S., Lwander, W., Overholt,
W.A., Pickett, J.A., Smart, L.E., Wadhams, L.J. and Woodcock, C.M. (1997) Intercropping
increases parasitism of pests. Nature 38, 631632.
Khush, G.S. (1980) Breeding for multiple disease and insect resistance in rice. In: Harris, M.K. (ed.)
Biology and Breeding for Resistance to Arthropods and Pathogens in Agricultural Plants. Texas
A & M University, pp. 341354.
Khush, G.S. (1992) Selecting rice for simply inherited resistance. In: Stalker, H.T. and Murphy, J.P.
(eds) Plant Breeding in the 1990s. CAB International, Wallingford, UK, pp. 303346.
Kidd, N.A.C. and Jervis, M.A. (1989) The effects of host-feeding behaviour on the dynamics of para-
sitoid-host interactions, and the implications for biological control. Research in Population
Ecology 31, 211250.
368 References
Insect Refs 11/7/00 9:29 am Page 368
Kidd, N.A.C. and Jervis, M.A. (1996) Population dynamics. In: Jervis, M.A. and N.A.C. Kidd (eds)
Insect Natural Enemies. Chapman & Hall, London, pp. 293374.
Kimmins, F.M. (1989) Electrical penetration graphs from Nilaparvata lugens on resistant and suscep-
tible rice varieties. Entomologia Experimentalis et Applicata 50, 6979.
King, A.B.S. and Saunders, J.L. (1984) The Invertebrate Pests of Annual Food Crops in Central
America. A Guide to their Recognition and Control. Overseas Development Administration,
London.
King, E.G. and Coleman, R.J. (1989) Potential for biological control of Heliothis spp. Annual Review
of Entomology 34, 5375.
King, E.G. and Phillips, J.R. (eds) (1983) Cotton Insects and Mites: Characterisation and
Management. Cotton Foundation Reference Book Series No. 3. National Cotton Council,
Memphis, USA.
King, E.G., Hopper, K.R. and Powell, J.E. (1985) Analysis of systems for biological control of crop
arthropod pests in the U.S. by augmentation of predators and parasites. In: Hoy, M.A. and
Herzog, D.C. (eds) Biological Control in Agricultural IPM Systems. Academic Press, Orlando and
London, pp. 201228.
Kips, R.H. (1985) Environmental aspects. In: Haskell, P.T. (ed.) Pesticide Application: Principles and
Practice. Clarendon Press, Oxford, pp. 190201.
Kirby, R.D. and Slosser, J.E. (1984) Composite economic threshold for three lepidopterous pests of
cabbage. Journal of Economic Entomology 77, 725733.
Kiritani, K. and Dempster, J.P. (1973) Different approaches to the quantitative evaluation of natural
enemies. Journal of Applied Ecology 10, 323330.
Kishaba, A.N., Toba, H.H., Wolf, W.W. and Vail, P. (1970) Response of laboratory-reared male cabbage
looper to synthetic sex pheromone in the eld. Journal of Economic Entomology 63, 178181.
Knight, J.D., Tatchell, G.M., Norton, G.A. and Harrington, R. (1992) FLYPAST. An information man-
agement system for the Rothamsted aphid database to aid pest control research and advice. Crop
Protection 11, 419426.
Kobayashi, T. and Cosenza, G.W. (1987) Integrated control of soybean stink bugs in the Cerrados.
Japanese Agricultural Research Q. 20, 229236.
Kogan, M. (1980) Insect problems of soybean in the United States. In: Corbin, F.T. (ed.) World
Soybean Research. Westview Press, Boulder, CO, USA, pp. 303325.
Kogan, M. (1988) Integrated pest management theory and practice. Entomologia Experimentalis et
Applicata 49, 5970.
Kogan, M. (1994) Plant resistance in pest management. In: Metcalf, R.L. and Luckmann, W.H. (eds)
Introduction to Insect Pest Management, 3rd edn. John Wiley & Sons, pp. 73128.
Kogan, M. and McGrath, D. (1993) Integrated pest management: present dilemmas and future chal-
lenges. In: Anais 14o Congreso Brasileiro de Entomologia. SEB, Piracicaba, SP, Brasil, Sociedade
Entomologica do Brasil.
Kogan, M. and Ortman E.F. (1978) Antixenosis a new term proposed to dene Painters nonprefer-
ence modality of resistance. Bulletin of the Entomological Society of America 24, 175176.
Kolodny-Hirsch, D.M. and Harrison, F.P. (1986) Yield loss relationships of tobacco and tomato horn-
worms (Lepidoptera: Sphingidae) at several growth stages of Maryland tobacco. Journal of
Economic Entomology 79, 731735.
Kolodny-Hirsch, D.M. and Schwalbe, C.P. (1990) Use of disparlure in the management of the gypsy
moth. In: Ridgway, R.L., Silverstein, R.M. and Inscoe, M.N. (eds) Behaviour-modifying
Chemicals for Insect Management. Applications of Pheromones and other Attractants. Marcel
Dekker, New York and Basel, pp. 363385.
Knig, A. (1998) Comparison of the EU and the U.S. regulatory framework for the environmental
safety assessment of transgenic crops an industry perspective. In: Kerry, B.R. (ed.) British Crop
Protection Council Symposium Proceedings No. 71. Biotechnology in Crop Protection: Facts and
Fallacies. British Crop Protection Council, Farnham, UK, pp. 101108.
Ktze, A.C. and Reynolds, S.E. (1989) Actions of cyromaine on insect cuticle. In: McFarlane, N.R.
(ed.) British Crop Protection Council Monograph No. 43. Progress and Prospects in Insect
Control. British Crop Protection Council, Farnham, UK, pp. 265.
Kouskolekas, C. and Decker, G.C. (1968) A quantitative evaluation of factors affecting alfalfa yield
reduction caused by the potato leafhopper attack. Journal of Economic Entomology 61, 921927.
References 369
Insect Refs 11/7/00 9:29 am Page 369
Koyama, J., Teruya, T. and Tanaka, K. (1984) Eradication of the oriental fruit y (Diptera: Tephritidae)
from the Okinawa Islands by male annihilation. Journal of Economic Entomology 77, 468472.
Koziel, M.G., Beland, G.L., Bowman, C., Carozzi, N.B., Crenshaw, R., Crossland, L., Dawson, J., Desai,
N., Hill, M., Kadwell, S., Lauris, K., Lewis, K., Maddox, D., McPherson, K., Meghji, M.R.,
Merlin, E., Rhodes, R., Warren, G.W., Wrights, M. and Erola, S.T. (1993) Field performance of
elite transgenic maize plants expressing an insecticidal protein derived from Bacillus
thuringiensis. Bio/Technology 11, 194200.
Kulman, H.M. (1971) Effects of insect defoliation on growth and mortality of trees. Annual Review of
Entomology 16, 289324.
Kumar, R. (1984) Insect Pest Control with Special Reference to African Agriculture. Edward Arnold,
London.
Kunz, S.E., Drummon, R.O. and Weintraub, J. (1984) A pilot test to study the use of the sterile insect
technique for eradication of cattle grubs. Preventative Veterinary Medicine 2, 523.
Kunz, S.E., Graham, M.R., Hogan, B.F. and Eschle, J.L. (1974) Effect of releases of sterile horn ies
into a native population of horn ies. Environmental Entomology 3, 159.
Kuperstein, M.L. (1974) Utilisation of the precipitin test of the quantitative estimation of the inu-
ence of Pterostichus crenuliger (Coleoptera: Carabidae) upon the population dynamics of
Eurygaster integriceps (Hemiptera: Scutelleridae). Zoologicheski Zhurnal 53, 557562.
Kuperstein, M.L. (1979) Estimating carabid effectiveness in reducing the sunn pest, Eurygaster inte-
griceps Puton (Heteroptera: Scutelleridae) in the USSR. Serology in insect predatorprey stud-
ies. Entomological Society of America, Miscellaneous Publication 11, 8084.
La Brecque, G.C. and Meifert, D.W. (1966) Control of house ies (Diptera: Muscidae) in poultry
houses with chemosterilants. Journal of Medical Entomology 3, 232236.
La Brecque, G.C., Meifert, D.W. and Fye, R.L. (1963) A eld study on the control of house ies with
chemosterilant techniques. Journal of Economic Entomology 56, 159.
La Brecque, G.C., Smith, C.N. and Meifert, D.W. (1962) A eld experiment in the control of houseies
with chemosterilant baits. Journal of Economic Entomology 55, 449451.
Laing, J.E. and Eden, G.M. (1990) Mass-production of Trichogramma minutum Riley on factitious
host eggs. Memoirs of the Entomological Society of Canada 153, 1024.
Landsmann, J. (1998) The regulatory framework in Europe. The genetechnology law in Germany. In:
Richter, J., Huber, J. and Schuler, B. (eds) Biotechnology for Crop Protection its Potential for
Developing Countries. Seutsche Stiftung fr Internationale Entwicklung, Feldang, Germany,
pp. 121127.
Langley, P.A. (1998) Target technologies for insect pest control. Pesticide Outlook 9, 612.
Langley, P.A. and Weidhaas, D. (1986) Trapping as means of controlling tsetse, Glossina spp.
(Diptera: Glossinidae): the relative merits of killing and sterilisation. Bulletin of Entomological
Research 76, 8995.
Lanier, G.N. (1990) Principles of attraction-annihilation: mass trapping and other means. In:
Ridgway, R.L., Silverstein, R.M. and Inscoe, M.N. (eds) Behaviour-modifying Chemicals for
Insect Management. Applications of Pheromones and other Attractants. Marcel Dekker, New
York and Basel, pp. 2545.
Larson, L.L. (1997) Spinodad, the rst member of a new class of insect control products, the natura-
lytes. IBCs 2nd Annual Conference on Biopesticides and Transgenic Plants. International
Business Communications, Southborough, MA, USA.
Lashomb, J.H. and Ng, Y.-S. (1984) Colonisation by Colorado potato beetles, Leptinotarsa decemlin-
eata (Say) Coleoptera: Chrysomelidae), in rotated and nonrotated potato elds. Environmental
Entomology 13, 13521356.
Lawrence, W.J.C. (1968) Plant Breeding. Institute of Biology, Studies in Biology No. 12. Edward
Arnold, London.
Lazzeri, P.A. (1998) Techniques for the development of transgenic crops in crop protection. In: Kerry,
B.R. (ed.) British Crop Protection Council Symposium Proceedings No. 71. Biotechnology in
Crop Protection: Facts and Fallacies. British Crop Protection Council, Farnham, UK, pp. 310.
Leather, S.R. (1993) Inuence of site factor modication on the population development of the pine
beauty moth (Panolis ammea) on a Scottish lodgepole pine (Pinus contorta) plantation. Forest
Ecology and Management 59, 207223.
Leather, S.R., Carter, N., Walters, K.F.A., Chroston, J.R., Thornback, N., Gardner, S.M. and Watson,
370 References
Insect Refs 11/7/00 9:29 am Page 370
S.J. (1984) Epidemiology of cereal aphids on winter wheat in Norfolk, 19791981. Journal of
Applied Ecology 21, 103114.
Leather, S.R., Watt, A.D. and Barbour, D.A. (1985) The effect of host-plant and delayed mating on the
fecundity and lifespan of the pine beauty moth, Panolis ammea (Denis and Shiffermuller)
(Lepidoptera: Noctuidae): their inuence on population dynamics and relevance to pest man-
agement. Bulletin of Entomological Research 75, 641651.
LeClerg, E.L. (1971) Field experiments for assessment of crop losses. In: Chiarappa, L. (ed.) Crop Loss
Assessment Methods, FAO Manual on the Evaluation and Prevention of Losses by Pests, Disease
and Weeds. Commonwealth Agricultural Bureaux, Slough, UK, pp. 2.1/12.1/9.
Lee, G., Stevens, D.J., Stokes, S. and Wratten, S.D. (1981) Duration of cereal aphid populations and
the effects on wheat yield and bread making quality. Annals of Applied Biology 98, 169178.
Leffelaar, P.A. and Ferrari, T.J. (1989) Some elements of dynamic simulation. In: Rabbinge, R., Ward,
S.A. and Laar, H.H. van (eds) Simulation and Systems Management in Crop Protection. Pudoc,
Wageningen, pp. 1945.
Legner, E.F. (1986) Importation of exotic natural enemies. In: Franz, J.M. (ed.) Biological Plant and
Health Protection. Biological Control of Plant Pests and of Vectors of Human and Animal
Diseases. Gustav Fischer Verlag, Stuttgart and New York, pp. 1930.
Leibee, G.L. (1985) Effects of storage at 1.1C on the mortality of Liriomyza trifolii (Burgess) (Diptera:
Agromyzidae) life stages in celery. Journal of Economic Entomology 78, 407411.
Leius, K. (1967a) Inuence of wild owers on parasitism of the tent caterpillar and codling moth.
Canadian Entomologist 99, 444446.
Leius, K. (1967b) Food sources and preferences of adults of a parasite, Scambus buolianae (Hym.:
Ichn.), and their consequences. Canadian Entomologist 99, 865871.
Lenz, M. and Runko, S. (1994) Protection of buildings, other structures and materials in ground con-
tact from attack by subterranean termites (Isoptera) with a physical barrier a ne mesh of high
grade stainless steel. Sociobiology 24, 116.
Lewis, T. (1981) Pest monitoring to aid insecticide use. Philosophical Transactions of the Royal
Society London B 295, 153162.
Lewis, T. (1998) Commitment to long-term agricultural research: a message for science, sponsors and
industry. In: Lewis, T. (ed.) The Bawden Memorial Lectures. British Crop Protection Council,
Farnham, UK, pp. 263292.
Lewis, T. and Macauley, E.D.M. (1976) Design and elevation of sex-attractant traps for pea moth,
Cydia nigricana (Steph.) and the effect of plume shape on catches. Ecological Entomology 1,
175187.
Liber, H. and Niccoli, A. (1988) Observations on the effectiveness of an attractant food spray in
increasing chrysopid predation on Prays oleae (Bern.) eggs. Redia 71, 467482.
Lilley, R., Hardie, J. and Wadhams, L.J. (1997) Manipulation of Praon populations with synthetic
aphid sex pheromones for the control of cereal aphids. Boletin de la Asociacion Espaola de
Entomologia. Supl. 21, 2329.
Linblad, M. and Solbreck, C. (1998) Predicting Oscinella frit population densities from suction trap
catches and weather data. Journal of Applied Ecology 35, 871181.
Lindgren, D.I. and Vincent, L.E. (1970) Effect of atmospheric gases alone or in combination on the
mortality of granary and rice weevils. Journal of Economic Entomology 63, 19261929.
Lindquist, D.A. and Busch-Petersen, E. (1987) Applied insect genetics and IPM. In: Delucchi, V. (ed.)
Integrated Pest Management, Protection Integre: Quo Vadis? An International Perspective.
Parasitis 86, Geneva, pp. 237255.
Lindquist, D.A., Abusowa, M. and Hall, M.J.R. (1992) The New World screwworm y in Libya: a
review of their introduction and eradication. Medical and Veterinary Entomology 6, 28.
Lindroth, C.H. (1957) The Faunal Connections between Europe and North America. John Wiley &
Sons, New York.
Lingren, P.D., Westbrook, J.K., Bryant, V.M. Jr., Raulston, J.R., Esquivel, J.F. and Jones G.D. (1994)
Origin of corn earworm (Lepidoptera: Noctuidae) migrants as determined by Citrus pollen mark-
ers and synoptic weather systems. Environmental Entomology 23(3), 562570.
Logan, J.A. (1989) Exposure of operators and bystanders to pesticides in the UK. In: McFarlane, N.R.
(ed.) British Crop Protection Council Monograph No. 43. Progress and Prospects in Insect
Control. British Crop Protection Council, Farnham, UK, pp. 231242.
References 371
Insect Refs 11/7/00 9:29 am Page 371
Lsel, P.M., Lindemann, M., Scherkenbeck, J., Campbell, C.A.M., Hardie, J., Pickett, J.A. and
Wadhams, L.J. (1996) Effect of primary-host dairomones on the attractiveness of the hop-aphid
sex pheromone to Phorodon humuli males and gynoparae. Entomologia Experimentalis et
Applicata 80, 7982.
Lvei, G.L., Hodgson, D.J., MacLeod, A. and Wratten, S.D. (1993) Attractiveness of some novel crops
for ower-visiting hoveries (Diptera: Syrphidae): comparisons from two continents. In: Corey,
S.A., Dall, D.J. and Milne, W.M. (eds) Pest Control and Sustainable Agriculture. CSIRO
Publications, Canberra, Australia, pp. 368370.
Lowe, H.J.B. (1973) Resistance to aphids in sugar beet. Annual Report of Plant Breeding Institute
1972, pp. 150.
Lucey, S., Parker, C., Campion, S. and Tatchell, M. (1997) A framework to improve the uptake of
computer models within the UK horticulture industry. MAFF Project Report: HH9913T.
Luck, R.F. (1990) Evaluation of natural enemies for biological control: a behavioural approach.
Trends in Ecology and Evolution 5, 196202.
Luck, R.F., Shepard, B.M. and Kenmore, P.E. (1988) Experimental methods for evaluating arthropod
natural enemies. Annual Review of Entomology 33, 367391.
Luijk, R., Lefferts, L.Y. and Groth, E. (1998) The importance of food safety issues from the public per-
spective. Public perception and the consumers interest in pesticide residues. The 1998 Brighton
Conference: Pests and Diseases Volume 1. British Crop Protection Council, Farnham, UK,
pp. 475482.
Lukefahr, M.J., Houghtaling, J.E. and Graham, H.M. (1971) Suppression of Heliothis populations with
glabrous cotton strains. Journal of Economic Entomology 64, 486488.
Lukefahr, M.J., Houghtaling, J.E. and Cruhm, D.G. (1975) Suppression of Heliothis spp. with
cotton containing combinations of resistant characters. Journal of Economic Entomology 68,
743746.
Lund, A.E. (1985) Insecticides: effects on the nervous system. In: Kerkut, G.A. and Gilbert, L.I. (eds)
Comprehensive Insect Physiology Biochemistry and Pharmacology. Pergamon, Oxford, pp. 956.
Luttrell, R.G. (1994) Cotton pest management: Part 2. A US perspective. Annual Review of
Entomology 39, 527542.
Luttrell, R.G., Fitt, G.P., Ramalho, F.S. and Sugonyaev, E.S. (1994) Cotton pest management Part 1. A
worldwide perspective. Annual Review of Entomology 39, 517526.
MacArthur, R.H. and Wilson, E.O. (1967) The Theory of Island Biogeography. Princeton University
Press, Princeton, New Jersey, USA.
McCarthy, M.T., Shepard, M. and Turnipseed, S.G. (1980) Identication of predacious arthropods in
soybeans by using autoradiography. Environmental Entomology 9, 199203.
McCown, B.H., McCabe, D.E., Russell, D.R., Robinson, D.J., Barton, K.A. and Raffa, K.F. (1991) Stable
transformation of Populus and incorporation of pest resistance by electric discharge particle
acceleration. Plant Cell Report 9, 590594.
McCoy, C.W., Samson, R.A. and Boucias, D.G. (1986) Entomogenous fungi. In: Ignoffo, C.M. and
Mandava, N.B. (eds) Handbook of Natural Pesticides. Volume 5: Microbial Pesticides. CRC Press,
Boca Raton, USA, pp. 151236.
McEwen, P.K., Jervis, M.A. and Kidd, N.A.C. (1993) The effect on olive moth (Prays oleae) popula-
tion levels, of applying articial food to olive trees. A.N.P.P 3rd International Conference on
Pests in Agriculture, Montpellier, pp. 361368.
McEwen, P.K., Jervis, M.A. and Kidd, N.A.C. (1994) Use of a sprayed L-tryptophan solution to con-
centrate numbers of the green lacewing Chrysoperla carnea in olive tree canopy. Entomologia
Experimentalis et Applicata 70, 9799.
Mack, T.P. (1992) Implementing innovative insect management systems in soybean in the southeast-
ern US. In: Copping, L.G., Green, M.B. and Rees, R.T. (eds) Pest Management in Soybean.
Elsevier Applied Science, London and New York, pp. 3645.
Mackauer, M. (1972) Genetic aspects of insect production. Entomophaga 17, 2748.
McKenzie, R.I.H. and Lambert, J.W. (1961) Comparison of F
3
lines and their related F
6
lines in two
barley crosses. Crop Science 1, 246249.
McKibben, G.H., Smith, J.W. and McGovern, W.L. (1990) Design of an attract-and-kill device for boll
weevil (Coleoptera: Curculionidae). Journal of Entomological Science 25, 581586.
McKinion, J.M. (1989) Modelling and economics. In: McFarlane, N.R. (ed.) British Crop Protection
372 References
Insect Refs 11/7/00 9:29 am Page 372
Council Monograph No. 43. Progress and Prospects in Insect Control. British Crop Protection
Council, Farnham, UK, pp. 203214.
MacLeod, J. and Donnelly, J. (1961) Failure to reduce an isolated blowy population by the sterile
males release method. Entomologia Experimentalis et Applicata 4, 101.
MacLeod, N.D. and Norton, G.A. (1996) Economic considerations for the assessment of losses due to
pasture diseases. In: Pasture and Forage Crop Pathology. American Society of Agronomy, Crop
Science Society of America and Soil Science Society of America, Madison, USA.
McManus, M.T., White, D.W.R. and McGregor, P.G. (1994) Accumulation of a chymotrypsin inhibitor
in transgenic tobacco can affect the growth of insect pests. Transgenic Research 3, 5058.
McNaughton, S.J. (1983) Compensatory plant growth as a response to herbivory. Oikos 40, 329336.
McPherson, R.M. and Newsom, L.D. (1984) Trap crops for control of stink bugs in soybean. Journal of
the Georgia. Entomological Society 19, 470480.
Manjunath, T.M. (1998) Mass production and application of biocontrol agents. In: Ananthakrishnan,
T.N. (ed.) Technology in Biological Control. Science Publishers Inc, Eneld, New Hampshire,
USA, pp. 112120.
Manly, B.F.J. (1974) Estimation of stage-specic survival rates and other parameters for insect popu-
lations passing through stages. Oecologia (Berl.) 15, 277285.
Manly, B.F.J. (1977) The determination of key factors from life table data. Oecologia 31, 111117.
Manly, B.F.J. (1990) Stage Structured Populations: Sampling Analysis and Simulation. Chapman &
Hall, London.
Manly, B.F.J. and Parr, M.J. (1968) A new method for estimating population size, survivorship and
birth rate from capture-recapture data. Transactions of the Society for British Entomology 18,
8189.
Markland, R.E. and Sweigart, J.R. (1987) Quantitative Methods: Application to Managerial Decision
making. John Wiley & Sons, Chichester, UK.
Marks, R.J. (1977) Laboratory studies of plant searching behaviour by Coccinella septempunctata L.
larvae. Bulletin of Entomological Research 67, 235241.
Marris, G.C., Weaver, R., Olieff, S.M., Mosson, H.J. and Edwards, J.P. (1996) Ectoparasitoid venom as
a regulator of Lepidopteran host development and moulting. Brighton Crop Protection
Conference 1996: Pests and Diseases Volume 3. British Crop Protection Council, Farnham, UK,
pp. 10211028.
Martin, P. and Bateson, P.P.G. (1993) Measuring Behaviour. An Introductory Guide, 2nd edn.
Cambridge University Press, Cambridge, UK.
Matteson, P.C., Gallagher, K.D. and Kenmore, P.E. (1994) Extension of integrated pest management for
planthoppers in Asian irrigated rice: empowering the user. In: Denno, R.F. and Perfect, T.J. (eds)
Planthoppers Their Ecology and Management. Chapman & Hall, New York and London,
pp.656685.
Matthews, G.A. (1979) Pesticide Application Methods. English Language Book Society/Longman,
Harlow, UK.
Matthews, G.A. (1981) Improved systems of pesticide application. Philosophical Transactions of the
Royal Society B 295, 163173.
Matthews, G.A. (1983) Suitability of pesticide application equipment take over for small-scale farm-
ers in tropical countries. 10th International Congress of Plant Protection, Plant Protection for
Human Welfare, Brighton, Volume 2, 517.
Matthews, G.A. (1984) Pest Management. Longman, London and New York.
Matthews, G.A. (1985) Application from the ground. In: Haskell, P.T. (ed.) Pesticide Application:
Principles and Practice. Clarendon Press, Oxford, pp. 95117.
Matthews, G.A. (1992) Pesticide Application Methods, 2nd edn. Longman Scientic & Technical,
Harlow, UK/John Wiley & Sons, New York, USA.
Matthews, G.A. (1997a) Techniques to evaluate insecticide efcacy. In: Dent, D.R. and Walton, M.P.
(eds) Methods in Ecological and Agricultural Entomology. CAB International, Wallingford, UK,
pp. 243270.
Matthews, G.A. (1997b) Implementing cotton integrated pest management. Experimental Agriculture
33, 114.
Matthews, G.A. and Clayphon, J.E. (1973) Safety precautions for pesticide application in the tropics.
PANS 19, 112.
References 373
Insect Refs 11/7/00 9:29 am Page 373
Mattson, W.J. and Haack, R.A. (1987) The role of drought stress in provoking outbreaks of phy-
tophagous insects. In: Barbosa, P. and Schultz, J.C. (eds) Insect Outbreaks. Academic Press, San
Diego and London, pp. 365407.
May, R.M. (1978) Host-parasitoid systems in patchy environments: a phenomenological model.
Journal of Animal Ecology 47, 833843.
May, R.M. and Hassell, M.P. (1981) The dynamics of multiparasitoid-host interactions. American
Naturalist 117, 234261.
May, R.M. and Hassell, M.P. (1988) Population dynamics and biological control. PTRB 318, 129169.
Maynard-Smith, J. (1974) Models in Ecology. Cambridge University Press, Cambridge.
Mayo, O. (1987) The Theory of Plant Breeding. Clarendon Press, Oxford.
Mayse, M.A. (1978) Effects of spacing between rows on soybean arthropod populations. Journal of
Applied Ecology 15, 439450.
Medawar, P.B. (1981) Advice to a Young Scientist. Pan Books, London, Sydney.
Medawar, P.B. (1986) The Limits of Science. Oxford University Press, Oxford, UK.
Mellado, L. (1971) La tecnica de machos esteriles en el control de la mosca Mediterrano. Programas
realizados en Espana. In: Sterility Principle for Insect Control or Eradication. IAEA/FAO,
Vienna, pp. 49.
Menn, J.J., Raina, A.K. and Edwards, J.P. (1989) Juvenoids and neuropeptides as insect control
agents: retrospect and prospects. In: McFarlane, N.R. (ed.) British Crop Protection Council
Monograph No. 43. Progress and Prospects in Insect Control. British Crop Protection Council,
Farnham, UK, pp. 87106.
Merlin, J., Lemaitre, O. and Grgoire, J.-C. (1996) Oviposition in Cryptolaemus montrouzieri stimu-
lated by wax laments of its prey. Entomologia Experimentalis et Applicata 79, 141146.
Merritt, C.R. (1998) The commercialisation of transgenic crops the Bt experience. In: Kerry, B.R.
(ed.) British Crop Protection Council Symposium Proceedings No. 71. Biotechnology in Crop
Protection: Facts and Fallacies. British Crop Protection Council, Farnham, UK, pp. 7986.
Messenger, P.S. and van den Bsoch, R. (1971) The adaptability of introduced biological control agents.
In: Huffaker, C.G. (ed.) Biological Control. Plenum Press, New York and London, pp. 1667.
Metcalf, R.L. (1980) Changing role of insecticides in crop protection. Annual Review of Entomology
25, 219256.
Metcalf, R.L. (1986) Coevolutionary adaptations of rootworm beetles (Coleoptera: Chrysomelidae) to
cucurbitacins. Journal of Chemical Ecology 12, 11091124.
Metcalf, R.L. and Metcalf, E.R. (1992) Plant Kairomones in Insect Ecology and Control. Chapman and
Hall, New York.
Metcalf, R.L. and Metcalf, R.A. (1993) Destructive and Useful Insects, 5th edn. McGraw-Hill, New
York, USA.
Metcalf, R.L., Rhodes, A.M., Metcalf, R.A., Ferguson, J., Metcalf, E.R. and Lu, P. (1982) Cucurbitacin
contents and diabroticite (Coleoptera: Chrysomelidae) feeding upon Cucurbita spp.
Environmental Entomology 11, 931937.
Meyer, J.A., Lancaster, J.L. Jr. and Simco, J.S. (1982) Comparison of habitat modication, animal con-
trol and standard spraying for control of the lone star tick. Journal of Economic Entomology 75,
724729.
Michael, P.J. (1989) Importation and establishment of new natural enemies of Heliothis spp.
(Lepidoptera: Noctuidae) in Australia. In: King, E.G. and Jackson, R.D. (eds) Proceedings of the
Workshop on Biological Control of Heliothis: Increasing the Effectiveness of Natural Enemies.
Far Eastern Regional Research Ofce, US Department of Agriculture, New Delhi, India,
pp. 364373.
Mihm, J.A. (1989) Evaluating maize for resistance to tropical stem borers, armyworms, and ear-
worms. In: Mihm, J.A., Wiseman, B.R. and Davis, F.M. (eds) Toward Insect Resistant Maize for
the Third World. International Wheat and Maize Improvement Center (CIMMYT), El Batan,
Mexico, pp. 109121.
Miller, J.R. and Cowles, R.S. (1990) Stimulo-deterrent diversion: a concept and its possible applica-
tion to onion maggot control. Journal of Chemical Ecology 16, 31973212.
Mills, N. (1997) Techniques to evaluate the efcacy of natural enemies. In: Dent, D.R. and Walton,
M.P. (eds) Methods in Ecological and Agricultural Entomology. CAB International, Wallingford,
UK, pp. 271291.
374 References
Insect Refs 11/7/00 9:29 am Page 374
Milne, W.M. and Bishop, A.L. (1987) The role of predators and parasites in the natural regulation of
lucerne aphids in eastern Australia. Journal of Applied Ecology 24, 893905.
Minks, A.K. and Jong, D.J. de (1975) Determination of spraying dates for Adoxophyes orana by sex
pheromone traps and temperature recordings. Journal of Economic Entomology 68, 729732.
Mishoe, J.W., Jones, J.W., Swaney, D.P. and Wilkerson, G.G. (1984) Using crop and pest models for
management applications. Agricultural Systems 15, 153170.
Mollema, C., Steenhuis, M.M., Inggamer, H. and Soria, C. (1993) Evaluating the resistance of
Frankliniella occidentalis in cucumber: methods, genotypic variation and effects upon thrips
biology. Bulletin IOBC/WPRS 16, 113116.
Mols, P.J.M., Booy, C.J.H. and de Visser, P. (1992) Gaby a computerized advisory system for IPM in
apple orchards. Acta Phytopathological Entomology 27, 461464.
Molthan, J. and Rupert, V. (1988) Zur bedeutung bluhender wildkrateur in felrainen und ackern fr
blutenbesuchende nutzinsekten. Mitteilungen aus der Biologischen Budnesanstalt fr Land-und
Fortwirtschaft 247, 8599.
Montiel, A. (1992) The inuence of the project clair 209 on the development of the new olivecul-
ture. In: Haskell, P.T. (ed.) Research Collaboration in European IPM Systems. British Crop
Protection Council Monograph No. 52, British Crop Protection Council, Farnham, UK,
pp. 7780.
Morewood, W.D. (1992) Cold storage of Phytoseiulus persimilis (Phytoseiidae). Experimental and
Applied Acarology 13, 231236.
Morgan, D., Walters, K.F.A., Oakley, J.N. and Lane, A. (1998) An internet-based decision support sys-
tem for the rational management of oilseed rape invertebrate pests. The 1998 Brighton
Conference: Pests and Diseases Volume 1. British Crop Protection Council, Farnham, UK,
pp. 259264.
Morlan, H.B., McCray, E.M. and Kilpatrick, J.W. (1962) Field tests with sexually sterile males for con-
trol of Aedes aegypti. Mosquito News 22, 295.
Morrison, R.E. and King, E.G. (1977) Mass production of natural enemies. In: Ridgway, R.L. and
Vinson, S.B. (eds) Biological Control by Augmentation of Natural Enemies. Insect and Mite
Control with Parasites and Predators. Plenum Press, New York and London, pp. 183217.
Morse, S. and Buhler, W. (1997) IPM in developing countries: the danger of an ideal. Integrated Pest
Management Reviews 2, 175186.
Moscardi, F. and Sosa-Gomez, D.R. (1992) Use of viruses against soybean caterpillars in Brazil. In:
Copping, L.G., Green, M.B. and Rees, R.T. (eds) Pest Management in Soybean. Elsevier Applied
Science, London and New York, pp. 98109.
Mulaa, M.A. (1995) Evaluation of factors leading to rational pesticide use for the control of the maize
stalk borer Busseola fusca (Lepidoptera: Noctuidae) in Trans-Nzoia district, Kenya. Unpublished
PhD Thesis, University of Wales, UK.
Mulder, P.G. and Showers, W.B. (1986) Defoliation by the armyworm (Lepidoptera: Noctuidae) on
eld corn in Iowa. Journal of Economic Entomology 79, 368373.
Mller, H.J. (1958) The behaviour of Aphis fabae in selecting its host plants, especially different vari-
eties of Vicia faba. Entomologia Experimentalis et Applicata 1, 6672.
Mullin, C.A. and Croft, B.A. (1985) An update on development of selective pesticides favouring
arthropod natural enemies. In: Hoy, M.A. and Herzog, D.C. (eds) Biological Control in
Agricultural IPM Systems. Academic Press, Orlando and London, pp. 123150.
Mullins, L.J. (1989) Management and Organisational Behaviour, 2nd edn. Pitman Publishing,
London, UK.
Mumford, J.D. and Knight, J.D. (1997) Injury, damage and threshold concepts. In: Dent, D.R. and
Walton, M.P. (eds) Methods in Ecological and Agricultural Entomology. CAB International,
Wallingford, UK, pp. 203220.
Mumford, J.D. and Norton, G.A. (1984) Economics of decision making in pest management. Annual
Review of Entomology 29, 157174.
Mumford, J.D. and Norton, G.A. (1987) Economic aspects of integrated pest management. In:
Delucchi, V. (ed.) Integrated Pest Management, Protection Integre: Quo Vadis? An International
Perspective. Parasitis 86, Geneva, pp. 397408.
Mumford, J.D. and Norton, G.A. (1989) Expert systems in pest management implementation on an
international basis. AI Applications 3, 6769.
References 375
Insect Refs 11/7/00 9:29 am Page 375
Mumford, J.D. and Norton, G.A. (1991) Economics of integrated pest control. In: Teng, P.S. (ed.) Crop
Loss Assessment and Pest Management. APS Press, St Paul, Minnesota, pp. 191200.
Mumford, J.D. and Norton, G.A. (1993) Survey and knowledge acquisition techniques. In: Norton,
G.A. and Mumford, J.D. (eds) Decision Tools for Pest Management. CAB International,
Wallingford, UK, pp. 7988.
Munthali, D.C. (1981) Biological efciency of small pesticide deposits. Unpublished PhD thesis,
University of London.
Munthali, D.C. and Scopes, N.E.A. (1982) A technique for studying the biological efciency of small
droplets of pesticide solutions and a consideration of the implications. Pesticide Science 13,
6062.
Murchie, A.K., Williams, I.H. and Smart, L.E. (1995) Responses of brassica pod midge (Dasineura
brassicae) and its parasitoid (Platygaster sp.) to isothiocyanates. Proceedings of the 9th
International Rapeseed Congress 1995: Rapeseed Today and Tomorrow. Groupe Consultatif
International de Recherche sur le Colza.
Murdoch, W.W. (1979) Predation and dynamics of prey populations. Fortschritte der Zoologie 25,
295310.
Murdoch, W.W. and Oaten, A.A. (1975) Predation and population stability. Advances in Ecological
Research 9, 1131.
Murdoch, W.W., Chesson, J. and Chesson, P.L. (1985) Biological control in theory and practice.
American Naturalist 125, 344366.
Murray, R.A. and Solomon, M.G. (1978) A rapid technique for analysing diets of invertebrate preda-
tors by electrophoresis. Annals of Applied Biology 90, 710.
Musgrave, A.E. (1980) Kuhns second thoughts. In: Cutting, G. (ed.) Paradigms and Revolutions.
University of Notre Dame Press, Notre Dame, pp. 3953.
Myers, J.H., Higgins, C. and Kovacs, E. (1988) How many insect species are necessary for the biologi-
cal control of insects? Environmental Entomology 18, 541547.
Nadel, H. and van Alphen, J.J.M. (1986) The role of host- and host-plant odours in the attraction of
the parasitoid Epidinocarsis lopezi to its host, the cassava mealybug, Phenacoccus manihoti.
Mededlingen van de Faculteit Landbouwwetenschappen Rijksuniversiteit (Gent) 51, 10791086.
Nadel, H. and van Alphen, J.J.M. (1987) The role of host and host plant odours in the attraction of a
parasitoid, Epidinocarsis lopezi to the habitat of its host, the cassava mealybug, Phenacoccus
manihoti. Entomologia Experimentalis et Applicata 45, 181186.
Nakamura, K. (1976) The active space of the pheromone of Spodoptera litura and the attraction of
adult males to the pheromone source. Proceedings of a Symposium on Insect Pheromones and
their Applications, Nagoaka and Tokyo 1976, pp. 145155.
Nakamura, M. and Nakamura, K. (1977) Population dynamics of the chestnut gall wasp, Dryocosmus
kuriphilus Yasumatsu (Hymenoptera: Cynipidae). Oecologia 27, 97116.
Neethling, D.C. and Dent, D.R. (1998) Metarhizium anisopliae, isolate IMI 330189: A mycoinsecti-
cide for locust and grasshopper control. The 1998 Brighton Conference: Pests and Diseases,
Volume 1. British Crop Protection Council, Farnham, UK, pp. 3742.
Nei, M., Maruyama, T. and Chakraborty, R. (1975) The bottleneck effect and genetic variability in
populations. Evolution 29, 110.
Nelson-Smith, D. (1998) 1995 Food or famine: politics, economics and science in the worlds food
supply. In: Lewis, T. (ed.) The Bawden Memorial Lectures. British Crop Protection Council,
Farnham, UK, pp. 279291.
Neuenschwander, P. and Herren, H.R. (1988) Biological control of the cassava mealybug,
Phenacoccus manihoti, by the exotic parasitoid Epidinocarsis lopezi in Africa. Philosophical
Transactions of the Royal Society B 318, 319333.
Neuenschwander, P., Schulthess, F. and Madojemu, E. (1986) Experimental evaluation of the ef-
ciency of Epidinocarsis lopezi, a parasitoid introduced into Africa against the mealybug,
Phenacoccus manihoti. Entomologia Experimentalis et Applicata 42, 133138.
Neuman, U. (1990) Commercial development: mating disruption of the European grape berry moth.
In: Ridgway, R.L., Silverstein, R.M. and Inscoe, M.N. (eds) Behaviour-modifying Chemicals for
Insect Management. Applications of Pheromones and other Attractants. Marcel Dekker, New
York and Basel, pp. 539546.
Newton, P.J. and Odendaal, W.J. (1990) Commercial inundative releases of Trichogrammatoidea cryp-
376 References
Insect Refs 11/7/00 9:29 am Page 376
tophlebiae (Hymenoptera: Trichogrammatidae) against Cryptophlebia leucotreta (Lepidoptera:
Tortricidae) in citrus. Entomophaga 35, 545556.
Ng, S.S., Davis, F.M. and Williams, W.P. (1990) Ovipositional response to southwestern corn borer
(Lepidoptera: Pyralidae) and fall armyworm (Lepidoptera: Noctuidae) to selected maize hybrids.
Journal of Economic Entomology 83, 15751577.
Nicholson, A.G. (1992) Compensatory growth of potatoes (Solanum tuberosum L.) in response to
defoliation. Thesis, Cornell University, USA.
Nicholson, A.J. and Bailey, V.A. (1935) The balance of animal populations. Proceeding of the
Zoological Society of London 1935, 551598.
Nicol, D. and Wratten, S.D. (1997) The effect of hydroxamic acid concentration at late growth stages
of wheat on the performance of the aphid Sitobion avenae. Annals of Applied Biology 130,
387396.
Nielson, M.W. and Lehman, W.F. (1980) Breeding approaches in alfalfa. In: Maxwell, F.G. and
Jennings, P.R. (eds) Breeding Plants Resistant to Insects. John Wiley and Sons, Chichester,
pp. 277312.
Niles, G.A. (1980) Breeding cotton for resistance to insect pests. In: Maxwell, F.G. and Jennings, P.R.
(eds) Breeding Plants Resistant to Insects. John Wiley and Sons, Chichester, pp. 337370.
Nordlund, D.A. (1981) Semiochemicals: a review of terminology. In: Nordlund, D.A., Jones, R.L. and
Lewis, W.J. (eds) Semiochemicals, Their Role in Pest Control. John Wiley and Sons, Chichester,
UK, pp. 1323.
Norris, D.M. and Kogan, M. (1980) Biochemical and morphological bases of resistance. In: Maxwell,
F.G. and Jennings, P.R. (eds) Breeding Plants Resistant to Insects. John Wiley and Sons,
Chichester, pp. 2361.
North, C. (1979) Plant Breeding and Genetics in Horticulture. Macmillan Press Limited, London.
Norton, G.A. (1976) Analysis of decision making in crop protection. Agroecosystems 3, 2744.
Norton, G.A. (1982a) Crop protection decision making an overview. British Crop Protection Council
Monograph No. 25. Decision Making in the Practice of Crop Protection. British Crop Protection
Council, Farnham, UK, pp. 311.
Norton, G.A. (1982b) A decision-analysis approach to integrated pest control. Crop Protection 1,
147164.
Norton, G.A. (1985) Economics of pest control. In: Haskell, P.T. (ed.) Pesticide Application: Principles
and Practice. Clarendon Press, Oxford, pp. 175189.
Norton, G.A. (1987) Pest management and world agriculture policy: research and extension. Papers
in Science, Technology and Pubic Policy, No. 13. Imperial College of Science and Technology
University of London, The Science Policy Research Unit University of Sussex, The Technical
Change Centre, London.
Norton, G.A. (1990) Decision tools for pest management: their role in IPM design and delivery.
FAO/UNEP/USSR Workshop on Integrated Pest Management. Kishinev, Moldavia 1990.
Norton, G.A. (1993) Philosophy, concepts and techniques. In: Norton, G.A. and Mumford, J.D. (eds)
Decision Tools for Pest Management. CAB International, Wallingford, UK, pp. 122.
Norton, G.A. and Evans, D.E. (1974) The economics of controlling froghopper (Aeneolamia varia sac-
charina (Dist.) (Hom., Cercopidae)) on sugar-cane in Trinidad. Bulletin of Entomological
Research 63, 619627.
Norton, G.A. and Mumford, J.D. (1983) Decision making in pest control. In: Coaker, T.H. (ed.)
Advances in Applied Biology, Vol. VIII. Academic Press, London, pp. 87119.
Norton, G.A. and Mumford, J.D. (eds) (1993) Decision Tools for Pest Management. CAB International,
Wallingford, UK.
Nottingham, S.F., Hardie, J., Dawson, G.W., Hick, A.J., Pickett, J.A., Wadhams, L.J. and Woodcock,
C.M. (1991) Behavioural and electrophysiological response of aphids to host and nonhost plant
volatiles. Journal of Chemical Ecology 17, 12311242.
Nwanze, K.F. (1989) Insect pests of pearl millet in Sahelian West Africa I. Acigona ignefusalis
(Pyralidae, Lepidoptera): distribution, population dynamics and assessment of crop damage.
Tropical Pest Management 35, 137142.
Nyffeler, M., Dean, D.A. and Sterling, W.L. (1987) Evaluation of the importance of the striped lynx
spider, Oxyopes salticus (Araneae: Oxyopidae), as a predator in Texas cotton. Environmental
Entomology 16, 11141123.
References 377
Insect Refs 11/7/00 9:29 am Page 377
Oakley, J.N., Walters, K.F.A., Ellis, S.A. and Young, J.E.B. (1998) The economic impact and evalua-
tion of control strategies for the reduced-rate use of aphicides against winter wheat aphids in the
UK. The 1998 Brighton Conference: Pests and Diseases Volume 3. British Crop Protection
Council, Farnham, UK, pp. 10831088.
OECD (1993) Safety Evaluation of Foods Produced by Modern Biotechnology: Concepts and
Principles. OECD, Paris.
Onstad, D.W., Shoemaker, C.A. and Hansen, B.C. (1984) Management of potato leafhopper, Empoasca
fabae (Homoptera: Cicadellidae), on alfalfa with the aid of systems analysis. Environmental
Entomology 13, 10461058.
Ooi, P.A.C. (1986) Insecticides disrupt natural biological control of Nilaparvata lugens in Sekinchan,
Malaysia. In: Hussein, M.Y. and Ibrahim, A.G. (eds) Biological Control in the Tropics. Universiti
Pertanian, Serdang, Malaysia, pp. 109120.
Oomen, P.A. (1998) Risk assessment and risk management of pesticide effects on non-target arthro-
pods in Europe. The 1998 Brighton Conference: Pests and Diseases Volume 2. British Crop
Protection Council, Farnham, UK, pp. 591598.
Ortega, A., Vasal, S.K., Mihim, J. and Hershey, C. (1980) Breeding for insect resistance in maize. In:
Maxwell, F.G. and Jennings, P.R. (eds) Breeding Plants Resistant to Insects. John Wiley and Sons,
Chichester, pp. 371420.
Ostlie, K.R. (1997) Context, performance and management issues of B.t. corn. IBCs 2nd Annual
Conference on Biopesticides and Transgenic Plants. International Business Communications,
Southborough, MA, USA.
Ozgur, A.F. and Sekeroglu, E. (1986) Population development of Bemisia tabaci (Homoptera:
Aleurodidae) on various cotton cultivars in Cukurova, Turkey. Agriculture Ecosystems and
Environment 17, 8388.
Pace, M.E. and MacKenzie, D.R. (1987) Modelling of crop growth and yield for loss assessment. In:
Teng, P.S. (ed.) Crop Loss Assessment and Pest Management. APS Press, St Paul, Minnesota,
pp. 3036.
Painter, R.H. (1951) Insect Resistance in Crop Plants. The Macmillan Company, New York.
Palmer, D.F., Windels, M.B. and Hiang, H.C. (1979) Articial infestation of corn with western corn
rootworm eggs in agar-water. Journal of Economic Entomology 70, 277278.
Panda, N. and Khush, G.S. (1995) Host Plant Resistance to Insects. CAB International, Wallingford,
UK, IRRI, Manila, Phillipines.
Parker, R.D. and Nilakhe, S.S. (1990) Evaluation of predators and parasites and chemical grain pro-
tectants on insect pests of sorghum stored in commercial bins. Proceedings of 3rd National
Stored Grain Pest Management Training Conference. Kansas City, MO, USA, pp. 229239.
Parker, W.E. and Biddle, A.J. (1998) Assessing the damage caused by black bean aphid (Aphis fabae)
on spring beans. Proceedings 1998 Crop Protection Conference Pests and Diseases. British
Crop Protection Council, Farnham, UK, pp. 10771082.
Parnell, F.R. (1935) Origin and development of the U4 cotton. Empire cotton growing. Crop Review
12, 177182.
Parr, W.J., Gould, H.J., Jessop, N.H. and Ludlam, F.A.B. (1976) Progress towards a biological control
programme for glasshouse whitey (Trialeurodes vaporariorum) on tomatoes. Annals of Applied
Biology 83, 349363.
Pathak, P.K., Saxena, R.C. and Heinrichs, E.A. (1982) Paralm sachet for measuring honeydew excre-
tion by Nilaparvata lugens on rice. Journal of Economic Entomology 75, 194195.
Pawar, C.S. (1986) Ultra low volume spraying for pest control in pigeonpea. Indian Journal of Plant
Protection 14, 3741.
Payne, C.C. (1982) Insect viruses as control agents. Parasitology 84, 3577.
Payne, C.C. (1988) Pathogens for the control of insects: where next? Philosophical Transactions of
the Royal Society B 318, 225248.
Peakall, D.B. (1993) DDE-induced eggshell thinning: an environmental detective story.
Environmental Review 1, 1320.
Pearl, R. (1928) The Rate of Living. Knopf, New York.
Pedgley, D.E., Reynolds, D.R. and Tatchell, G.M. (1995) Long-range insect migration in relation to cli-
mate and weather: Africa and Europe. In: Drake, V.A. and Gatehouse, A.G. (eds) Insect
Migration: Tracking Resources through Space and Time. Cambridge University Press, pp. 329.
378 References
Insect Refs 11/7/00 9:29 am Page 378
Pedigo, L.P. (1996) Entomology and Pest Management, 2nd edn. Prentice Hall, Englewood Cliffs, NJ,
USA.
Pedigo, L.P. and Higley, L.G. (1992) The economic injury level concept and environmental quality. A
new perspective. American Entomologist Spring 92, 1221.
Pedigo, L.P. and Zeiss, M.R. (1996) Effect of soybean planting date on bean leaf beetle (Coleoptera
Chrysomelidae) abundance and pod injury. Journal of Economic Entomology 89, 183188.
Pedigo, L.P., Hutchins, S.H. and Higley, L.G. (1986) Economic injury levels in theory and practice.
Annual Review of Entomology 31, 341368.
Pena, J.E., Pohronezny, K., Waddill, V.H. and Stimac, J. (1986) Tomato pinworm (Lepidoptera:
Gelechiidae) articial infestation: effect on foliar and fruit injury of ground tomatoes. Journal of
Economic Entomology 79, 957960.
Penman, D.R., Rohitha, B.H., White, J.G.H. and Smalleld, B.M. (1979) Control of bluegreen lucerne
aphid by grazing management. Proceedings 32nd New Zealand Weed and Pest Control
Conference, pp. 186191.
Percy-Smith, A. and Philpsen, H. (1992) Implementation of carrot y monitoring in Denmark. In:
Finch, S. and Freuler, J. (eds) Proceedings of Working Group Meeting: Integrated Control in Field
Vegetable Crops. IOBC/WPRS pp. 3642.
Perkins, J.H. (1982) Insects, Experts and the Insecticide Crisis: the Quest for New Pest Management
Strategies. Plenum, New York, USA.
Perlack, F.J., Deaton, R.W., Armstrong, T.A., Fuchs, R.L., Sims, S.R., Greenplate, J.T. and Fischhoff,
D.A. (1990) Insect resistant cotton plants. Bio/Technology 8, 939943.
Perrin, R.M. (1995) Synthetic pyrethroids success story. In: Best, G.A. and Ruthven, A.D. (eds)
Pesticides Developments, Impacts, and Controls. The Royal Society of Chemistry, London, UK,
pp. 1927.
Perrin, R.M. and Phillips, M.L. (1978) Some effects of mixed cropping on the population dynamics of
insect pests. Entomologia Experimentalis et Applicata 24, 385393.
Perry, J.N. (1997) Statistical aspects of eld experiments. In: Dent, D.R. and Walton, M.P. (eds)
Methods in Ecological and Agricultural Entomology. CAB International, Wallingford, UK,
pp. 171202.
Perry, J.N., Wall, C. and Greenway, A.R. (1980) Latin Square designs in eld experiments involving
insect sex attractants. Ecological Entomology 5, 385396.
Petrie, H.G. (1976) Do you see what I see: the epistemology of interdisciplinary inquiry. Journal of
Aesthetic Education 10, 2943.
Petterson, J., Pickett, J.A., Pye, B.J., Quiroz, A., Smart, L.E., Wadhams, L.J. and Woodcock, C.M.
(1994) Winter host component reduces colonization by birdcherryoak aphid Rhapalosiphum
padi (L.) (Homoptera, Aphidae) and other aphids in cereal elds. Journal of Chemical Ecology
20, 25652574.
Pfeiffer, D.G., Kaakeh, W., Killian, J.C., Lachance, M.W. and Kirsch, P. (1993) Mating disruption for
control of damage by codling moth in Virginia apple orchards. Entomologia Experimentalis et
Applicata 67, 5764.
Pfeiffer, D.G., Killian, J.C., Rajotte, E.G., Hull, L.A. and Snow, J.W. (1991) Mating disruption for
reduction of damage by lesser peach tree borer (Lepidoptera: Sesiidae) in Virginia and
Pennsylvania peach orchards. Journal of Economic Entomology 84, 218223.
Pickett, C.H., Wilson, L.T. and Flaherty, D.L. (1990) The role of refuges in crop protection, with refer-
ence to plantings of French prune trees in a grape agroecosystem. In: Bostanian, N.J., Wilson,
L.T. and Dennehy, T.J. (eds) Monitoring and Integrated Management of Arthropod Pests of Small
Fruit Crops. Intercept, Andover, UK, pp. 151165.
Pickett, J.A. (1988) The future of semiochemicals in pest control. Aspects of Applied Biology No. 17,
Environmental Aspects of Applied Biology. The Association of Applied Biologists,
Wellesbourne, UK, pp. 397406.
Pickett, J.A. and Woodcock, C.M. (1993) Chemical ecology of plants and insects, helping crops to
help themselves. Interdisciplinary Science Reviews 18, 6872.
Pickett, J.A., Dawson, G.W., Grifths, D.C., Hassanali, A., Merritt, L.A., Mudd, A., Smith, M.C.,
Wadhams, L.J., Woodcock, C.M. and Zhang, Z.-N. (1987) Development of plant-derived
antifeedants for crop protection. In: Greenhalgh, R. and Roberts, T.R. (eds) Pesticide Science and
Biotechnology. Blackwell Scientic, Oxford, pp. 125128.
References 379
Insect Refs 11/7/00 9:29 am Page 379
Pickett, J.A., Wadhams, L.J. and Woodcock, C.M. (1995) Exploiting chemical ecology for sustainable
pest control. British Crop Protection Monograph No. 63, Integrated Crop Protection: Towards
Sustainabilities? British Crop Protection Council, Farnham, pp. 353362.
Pickup, J. and Brewer, A.M. (1994) The use of aphid suction-trap data in forecasting the incidence of
potato leafroll virus in Scottish seed potatoes. Proceedings 1994 British Crop Protection
Conference Pests and Diseases. British Crop Protection Council, Farnham, UK, pp. 351358
Pike, K.S. and Glazer, M. (1982) Strip rotary tillage: a management method for reducing Fumibotys
fumalis (Lepidoptera: Pyralidae) in peppermint. Journal of Economic Entomology 75, 11361139.
Pimentel, D. (1963) Introducing parasites and predators to control native pests. Canadian
Entomologist 95, 785792.
Pimentel, D., Acquay, H., Biltonen, M., Rice, P., Silva, M., Nelson, J., Lipner, V., Giordana, S.,
Horowitz, A. and DAmore, M. (1993) Assessment of environmental and economic impacts of
pesticide use. In: Pimentel, D. and Lehman, H. (eds) The Pesticide Question, Environment,
Economics and Ethics. Chapman & Hall, New York, pp. 4784.
Pincus, J., Waibel, H. and Jungbluth, F. (1999) Pesticide policy: an international perspective. In:
Poapongsakorn, N., Meenakanit, L., Waibel, H. and Jungbluth, F. (eds) Approaches to Pesticide
Policy Reform Building Consensus for Future Action. Publication Series No. 7. Pesticide Policy
Project, Hannover, Germany, pp. 422.
Pinnschmidt, H.O., Batchelor, W.D. and Teng, P.S. (1995) Simulation of multiple species pest damage
in rice using CERES-rice. Agricultural Systems 48, 193222.
Pitcairn, M.J., Zalom, F.G. and Rice, R.E. (1992) Degree-day forecasting of generation time of Cydia
pomonella (Lepidoptera: Tortricidae) populations in California. Environmental Entomology
21(3), 441446.
Pitre, H.N. (ed.) (1983) Natural Enemies of Arthropod Pests in Soybean. South Carolina Agricultural
Experimental Station Southern Cooperative Series Bulletin 285. Clemson, SC, USA.
Podoler, H. and Rogers, D. (1975) A new method for the identication of key factors from life-table
data. Journal of Animal Ecology 44, 85114.
Poinar, G.O. (1983) Recent developments in the use of nematodes in the control of insect pests. 10th
International Congress of Plant Protection 1983, Plant Protection for Human Welfare, Brighton.
Volume 3, pp. 751758.
Pollard, E. (1971) Hedges. IV. Habitat diversity and crop pests: a study of Brevicoryne brassicae and
its syrphid predator. Journal of Applied Ecology 8, 751780.
Ponti, O.M.B. de (1982) Resistance to insects: a challenge to plant breeders and entomologists. In:
Visser, J.H. and Minks, A.K. (eds) Proceedings of the 5th International Symposium on
InsectPlant Relationships. Pudoc, Wageningen, The Netherlands, pp. 337348.
Ponti, O.M.B. de (1983) Resistance to insects promotes the stability of integrated pest control. In:
Lamberti, F., Waller, J.M. and Graff, N.A. van der (eds) Durable Resistance in Crops. Plenum
Press, New York, pp. 211223.
Ponti, O.M.B. de, Romanov, L.F. and Berlinger, M.J. (1990) Whitey-plant relationships: plant resis-
tance. In: Gerling, D. (ed.) Whiteies: their Bionomics, Pest Status and Management. Intercept,
Andover, pp. 91106.
Poston, F.L., Pedigo, L.P. and Welch, S.M. (1983) Economic injury levels: reality and practicality.
Bulletin of the Entomological Society of America 29, 4953.
Potter, D.A. and Timmons, G.M. (1983) Forecasting emergence and ight of the lilac borer
(Lepidoptera: Sessiidae) based on pheromone trapping and degree-day accumulations.
Environmental Entomology 12, 400403.
Powell, G., Hardie, J. and Pickett, J.A. (1997) Laboratory evaluation of antifeedant compounds for
inhibiting settling by cereal aphids. Entomologia Experimentalis et Applicata 84, 189193.
Powell, J.E. (1989) Importation and establishment of predators and parasitoids of Heliothis into the
USA. In: King, E.G. and Jackson, R.D. (eds) Proceedings of the Workshop on Biological Control of
Heliothis: Increasing the Effectiveness of Natural Enemies. Far Eastern Regional Research Ofce,
US Department of Agriculture, New Delhi, India, pp. 387395.
Powell, W. (1986) Enhancing parasitoid activity in crops. In: Waage, J. and Greathead, D. (eds) Insect
Parasitoids. Academic Press, London, pp. 319340.
Powell, W. and Walton, M.P. (1995) Populations and communities. In: Jervis, M.A. and N.A.C. Kidd
(eds) Insect Natural Enemies. Chapman & Hall, London, pp. 223292.
380 References
Insect Refs 11/7/00 9:29 am Page 380
Powell, W. and Wright, A.F. (1988) The abilities of the aphid parasitoids Aphidius ervi Haliday and
A. rhopalosiphi De Stefani Perez (Hymenoptera: Braconidae) to transfer between different
known host species and the implications for the use of alternative hosts in pest control strate-
gies. Bulletin of Entomological Research 78, 683693.
Powell, W., Walton, M.P. and Jervis, M.A. (1996) Populations and communities. In: Jervis, M.A. and
Kidd, N.A.C. (eds) Insect Natural Enemies. Chapman & Hall, London, pp. 223292.
Price, P.W. (1987) Pathogen-induced cycling of outbreak insect populations. In: Barbosa, P. and
Schultz, J.C. (eds) Insect Outbreaks. Academic Press, San Diego and London, pp. 269285.
Prinsley, R.T. (ed.) (1987) Integrated Crop Protection for Small Scale Farms in East Africa.
Commonwealth Science Council, London, UK.
Prior, C. (1997) Susceptibility of target acridoids and non-target organisms to Metarhizium anisopliae
and Metarhizium avoviride. In: Krall, S., Peveling, R. and BaDiallo, D. (eds) New Strategies in
Locust Control. Berkhauser Verlag, Basel, Switzerland, pp. 369375.
Prior, C., Carey, M., Abraham, Y.J., Moore, D. and Bateman, R.P. (1996) Development of a bioassay
method for the selection of entomopathogenic fungi virulent to the desert locust Schistocerca
gregaria (Forskal). Journal of Applied Ecology 119, 567573.
Prokopy, R.J., Collier, R.H. and Finch, S. (1983) Visual detection of host plants by cabbage root ies.
Entomologia Experimentalis et Applicata 34, 8589.
Pruess, K.P. (1983) Day-degree methods for pest management. Environmental Entomology 12,
613619.
Pschorn-Walcher, H. (1977) Biological control of forest insects. Annual Review of Entomology 22,
122.
Puntener, W. (1981) Manual for Field Trials in Plant Protection, 2nd edn. Ciba Geigy, Basle,
Switzerland.
Puterka, G.J., Black, W.C. (IV), Steiner, W.M. and Burton, R.L. (1993) Genetic variation and phyloge-
netic relationships amongst world-wide collections of Russian wheat aphid, Diuraphis noxia
(Mordvilko), inferred from allozyme and RAPD-PCR markers. Heredity 70, 604618.
Quicke, D. (1988) Spiders bite their way towards safer insecticides. New Scientist
120(1640), 3841.
Quisumbing, A.R. and Kydonieus, A.F. (1990) Controlled-release technologies for pest management.
In: Wilkins, R.M. (ed.) Controlled Delivery of Crop-protection Agents. Taylor & Francis, London,
UK, pp. 4363.
Rabbinge, R. (1989) Population models for fruit-tree spider mite and predatory mites. In: Rabbinge,
R., Ward, S.A. and Laar, H.H. van (eds) Simulation and Systems Management in Crop
Protection. Pudoc, Wageningen, pp. 131144.
Rabbinge, R. and Wit, C.T. de (1989) Systems, models and simulation. In: Rabbinge, R., Ward, S.A.
and Laar, H.H. van (eds) Simulation and Systems Management in Crop Protection. Pudoc,
Wageningen, pp. 315.
Rabbinge, R., Ankersmit, G.W. and Pak, G.A. (1979) Epidemiology and simulation of population
development of Sitobion avenae in winter wheat. Netherlands Journal of Plant Pathology 85,
197200.
Rabbinge, R., Ward, S.A. and van Laar, H.H. (1989) Simulation and Systems Management in Crop
Protection. Pudoc, Wageningen, The Netherlands.
Raheja, A.K. (1995) Practice of IPM in South and Southeast Asia. In: Mengech, A.N., Saxena, K.N.
and Gopalan, H.N.B. (eds) Integrated Pest Management in the Tropics. John Wiley & Sons,
Chichester, UK, pp. 69120.
Rai, B.K. (1977) Damage to coconut palms by Azteca sp. (Hymenoptera: Formicidae) and insecticidal
control with bait, in Guyana. Bulletin of Entomological Research 67, 175183.
Ramalho, F.S. (1994) Cotton pest management: Part 4. A Brazilian perspective. Annual Review of
Entomology 39, 563578.
Ratcliffe, D.A. (1967) Decrease in eggshell weight in certain birds of prey. Nature 215, 208210.
Raty, L., Drumont, A., de Windt, N and Grgoire, J.-C. (1995) Mass trapping of the spruce bark beetle
Ips typographus L.: traps or trap trees? Forest Ecology and Management 78, 191205.
Readshaw, J.L. (1973) The numerical response of predators to prey density. Journal of Applied
Ecology 10, 342351.
Readshaw, J.L. and Van Gerwen, A.C.M. (1983) Age-specic survival, fecundity and fertility of the
References 381
Insect Refs 11/7/00 9:29 am Page 381
adult blowy, Lucilia cuprina, in relation to crowding, protein food and population cycles.
Journal of Animal Ecology 52(3), 879887.
Redfearn, A. and Pimm, S.L. (1987) Insect outbreaks and community structure. In: Barbosa, P. and
Schultz, J.C. (eds) Insect Outbreaks. Academic Press, San Diego and London, pp. 99133.
Reed, W. (1983) Crop losses caused by insect pests in the developing world. 10th International
Congress of Plant Protection 1983, Plant Protection for Human Welfare, Brighton, Volume 1,
pp. 7480.
Reed, W., Davies, J.C. and Green, S. (1985) Field experimentation. In: Haskell, P.T. (ed.) Pesticide
Application: Principles and Practice. Clarendon Press, Oxford, pp. 153174.
Reeve, J.D. (1988) Environmental variability, migration and persistence in host-parasitoid systems.
American Naturalist 132, 810836.
Reeve, J.D. (1990) Stability, variability and persistence in host-parasitoid systems. Ecology 71,
422426.
Regev, U., Shalit, H. and Gutierrez, A.P. (1976) Economic conicts in plant protection: the problems of
pesticide resistance, theory and application to the Egyptian alfalfa weevil. In: Norton, G.A. and
Holling, C.S. (eds) Proceeding of the Conference on Pest Management. IIASA, Laxenburg, Austria.
Reichelderfer, K.H. (1989) Economic contributions of pest management to agricultural development.
Tropical Pest Management 35, 248251.
Reichelderfer, K.H., Carlson, G.A. and Norton, G.A. (1984) Economic Guidelines for Crop Pest
Control. FAO Plant Production and Protection Paper 58. Food and Agriculture Organisation of
the United Nations, Rome.
Renn, N. (1995) Mortality of immature houseies (Musca domestica L.) in articial diet and chicken
manure after exposure to encapsulated entomopathogenic nematodes (Rhabditida:
Steinernematidae, Heterorhabditidae). Biocontrol Science and Technology 5, 349359.
Reuter, O.M. (1913) Lebensgewahnheiten and Instinkte der Inseckten. Friedlander, Berlin.
Reynolds, D.R., Riley, J.R., Armes, N.J., Cooter, R.J., Tucker, M.R. and Colvin, J. (1997) Techniques for
quantifying insect migration. In: Dent, D.R. and Walton, M.P. (eds) Methods in Ecological and
Agricultural Entomology. CAB International, Wallingford, UK, pp. 111146.
Reynolds, S.E. (1989) The integument as a target for insecticides: disruption of cuticle chemistry,
structure and function. In: McFarlane, N.R. (ed.) British Crop Protection Council Monograph No.
43. Progress and Prospects in Insect Control. British Crop Protection Council, Farnham, UK,
pp. 7387.
Rice, M.E. and Wilde, G.E. (1988) Experimental evaluation of predators and parasitoids in suppress-
ing greenbugs (Homoptera: Aphididae) in sorghum and wheat. Environmental Entomology 17,
836841.
Richter, A.R. and Fuxa, J.R. (1984) Timing, formulation and persistence of a nuclear polyhedrosis
virus and a microsporidium for control of the velvetbean caterpillar (Lepidoptera: Noctuidae) in
soybeans. Journal of Economic Entomology 77, 12991306.
Riechert, S.E. and Bishop, L. (1990) Prey control by an assemblage of generalist predators: spiders in
garden test systems. Ecology 71, 14411450.
Riechert, S.E. and Lockley, T. (1984) Spiders as biological control agents. Annual Review of
Entomology 29, 299320.
Riley, J.R. (1974) Radar observations of individual desert locusts (Schistocerca gregaria) (Forsk.).
Bulletin of Entomological Research 64, 1932.
Riley, J.R. (1993) Flying insects in the eld. In: Wratten, S.D. (ed.) Video Techniques in Animal
Ecology and Behaviour. Chapman and Hall, London, pp. 115.
Riley, J.R. and Reynolds, D.R. (1995) Monitoring the movement of migratory insect pests.
Proceedings of the 3rd International Conference on Tropical Entomology, Nairobi, 1994.
Risch, S.J. (1981) Insect herbivore abundance in tropical monocultures and polycultures: an experi-
mental test of two hypotheses. Ecology 62, 13251340.
Risch, S.J. (1987) Agricultural ecology and insect outbreaks. In: Barbosa, P. and Schultz, J.C. (eds)
Insect Outbreaks. Academic Press, San Diego and London, pp. 217238.
Risch, S.J., Andow, D. and Altieri, M.A. (1983) Agroecosystem diversity and pest control: data, tenta-
tive conclusions, and new research directions. Environmental Entomology 12, 625629.
Robinson, J., Fischer, M. and Hoisington, D. (1993) Molecular characterisation of Diuraphis spp.
using random amplied polymorphic DNA. Southwestern Entomologist 18, 121127.
382 References
Insect Refs 11/7/00 9:29 am Page 382
Robinson, R.A. (1976) Plant Pathosystems. Springer-Verlag, Berlin.
Robinson, R.A. (1979) Permanent and impermanent resistance to crop parasites: a re-examination of
the pathosystem concept with special reference to rice blast. Zeitschrift fr Panzenzchtung
83, 139.
Robinson, R.A. (1980a) The pathosystem concept. In: Maxwell, F.G. and Jennings, P.R. (eds) Breeding
Plants Resistant to Insects. John Wiley & sons, Chichester, Brisbane and Toronto, pp. 157182.
Robinson, R.A. (1980b) New concepts in breeding for disease resistance. Annual Review of
Phytopathology 18, 189210.
Robinson, R.A. (1983) Theoretical resistance models. In: Lamberti, F., Waller, J.M. and Graff, N.A.
van der (eds) Durable Resistance in Crops. Plenum Press, New York, pp. 4555.
Robinson, R.A. (1987) Host Management in Crop Pathosystems. Macmillan Publishing Company,
New York and Collier-Macmillan Limited, London.
Robinson, R.A. (1991) The controversy concerning vertical and horizontal resistance. Revista
Mexicana de Fitopatologia 9, 5763.
Robinson, R.A. (1996) Return to Resistance: Breeding Crops to Reduce Pesticide Dependence.
Ottawa: agAccess, Davis, California and International Development and Research Centre.
Robinson, S.H., Wolfenbarger, D.A. and Dilday, R.H. (1980) Antixenosis of smooth leaf cotton to the
ovipositional response of tobacco budworm. Crop Science 20, 646649.
Rodenhouse, N.L., Barrett, G.W., Zimmerman, D.M. and Kemp, J.C. (1992) Effects of uncultivated
corridors on arthropod abundances and crop yields in soybean agroecosystems. Agriculture,
Ecosystems and Environment 38, 179191.
Rogers, C.E. (1985) Cultural management of Dectes texanus (Coleoptera: Cerambycidae) in sunower.
Journal of Economic Entomology 78, 11451148.
Rogers, D.J. (1972) Random search and insect population models. Journal of Animal Ecology 41,
369383.
Rmbke, J. and Moltman, J.F. (1996) Applied Ecotoxicology. CRC Press, Boca Raton, USA.
Root, R.B. (1973) Organisation of a plant-arthropod association in simple and diverse habitats: the
fauna of collards (Brassica oleracea). Ecological Monographs 43, 95124.
Rosier, M. (1992) The importance of soybean as a market for agricultural chemicals. In: Copping,
L.G., Green, M.B. and Rees, R.T. (eds) Pest Management in Soybean. Elsevier Applied Science,
London and New York, pp. 19.
Rossing, W.A.H. (1989) Application of operations research techniques in crop protection. In:
Rabbinge, R., Ward, S.A. and Laar, H.H. van (eds) Simulation and Systems Management in Crop
Protection. Pudoc, Wageningen, pp. 278298.
Rossing, W.A.H. and Heong, K.L. (1997) Opportunities for using systems approaches in pest manage-
ment. Field Crops Research 51, 83100.
Rossing, W.A.H. and Wiel, L.A.J. M. van de (1990) Simulation of damage in winter wheat caused by
the grain aphid Sitobion avenae. I. Quantication of the effects of honeydew on gas exchange of
leaves and aphid populations of different size on crop growth. Netherlands Journal of Plant
Pathology 96, 343364.
Rossini, F.A., Porter, A.L., Kelly, P. and Chubin, D.E. (1978) Frameworks and factors affecting integra-
tion within technology assessments. Department of Social Science Final Technical Report, NSF
Grnt ERS 7604474. Georgia Institute of Technology.
Rotem, J., Bashi, E. and Kranz, J. (1983a) Studies of crop loss in potato blight caused by
Phytophthora infestans. Plant Pathology 32, 117122.
Rotem, J., Kranz, J. and Bashi, E. (1983b) Measurement of healthy and diseased haulm area for assess-
ing late blight epidemics in potatoes. Plant Pathology 32, 109115.
Rothschild, G.H.L. (1966) A study of a natural population of Conomelus anceps (Germar)
(Homoptera: Delphacidae) including observations on predation using the precipitin test. Journal
of Applied Ecology 35, 413434.
Roush, D.K. and McKenzie, J.A. (1987) Ecological genetics of insecticide and acaricide resistance.
Annual Review of Entomology 32, 361380.
Rubia, E.G., Heong, K.L., Zalucki, M., Gonzlaes, B. and Norton, G. (1996) Mechanisms of compensa-
tion of rice plants to stem borer injury. Crop Protection 15, 335340.
Russell, D.A. (1987) A simple method for improving estimates of percentage parasitism by insect par-
asitoids from eld sampling of hosts. New Zealand Entomologist 10, 3840.
References 383
Insect Refs 11/7/00 9:29 am Page 383
Russell, E.P. (1989) Enemies hypothesis: a review of the effect of vegetational diversity on predatory
insects and parasitoids. Environmental Entomology 18, 590599.
Russell, G.E. (1978) Plant Breeding for Pest and Disease Resistance. Butterworth, London and
Boston.
Sadras, V.O. (1996) Cotton responses to simulated insect damage: radiation-use efciency, canopy
architecture and leaf nitrogen content as affected by loss of reproductive organs. Field Crops
Research 48, 199208.
Sadras, V.O. and Wilson, L.J. (1997a) Growth analysis of cotton crops infested with spider mites: I.
Light interception and radiation-use efciency. Crop Science 37, 481491.
Sadras, V.O. and Wilson, L.J. (1997b) Growth analysis of cotton crops infested with spider mites: II.
Partitioning of dry matter. Crop Science 37, 492497.
Sadras, V.O. and Wilson, L.J. (1997c) Nitrogen accumulation and partitioning in shoots of cotton
plants infested with two-spotted spider mites. Australian Journal of Agricultural Research 48,
525533.
Saiki, R.K., Gelfand, D.H., Stoffel, S., Scharf, S.J., Higuchi, R., Horn, G.T., Mullis, K.B. and Erlich,
H.A. (1988) Primer-directed enzymatic amplication of DNA with a thermostable DNA poly-
merase. Science 293, 487491.
Sailer, R.I. (1983) History of insect introduction. In: Wilson, C.I. and Graham, C.I. (eds) Exotic Plant
Pests and North American Agriculture. Academic Press, New York, USA, pp. 1538.
Salifu, A.B., Singh, R. and Hodgson, C.J. (1988) Mechanism of resistance in cowpea (Vigna unguiculata)
genotype TVx3236, to the bean ower thrips Megalurothrips sjostedt (Thysanoptera: Thripidae) 2.
Non-preference and antibiosis. Tropical Pest Management 34, 185188.
Salt, D.W. and Ford, M.G. (1984) The kinetics of insecticide action. Part III. The use of stochastic
modelling to investigate the pick-up of insecticides from ULV-treated surfaces by larvae of
Spodoptera littoralis. Pesticide Science 15, 382410.
Samways, M.J. (1981) Biological Control of Pests and Weeds. Institute of Biology, Studies in Biology
No. 132. Edward Arnold, London.
Santoso, T., Sunjaya, Dharmapurtra, O.S., Halid, H. and Hodges, R.J. (1996) Pest management in pso-
cids in milled rice stores in the humid tropics. International Journal of Pest Management 42,
189197.
Sattaur, O. (1989) Genes on deposit: saving for the future. New Scientist 123, 3741.
Saud, S., Saadon, M., Esa, Y.M. and Taharim, N. (1985) Implementation of integrated pest manage-
ment programme for paddy in the Tanjong Karang irrigation scheme. In: Lee, B.S., Loke, W.H.
and Heong, K.L. (eds) Integrated Pest Management in Malaysia. The Malaysian Plant Protection
Society, Kuala Lumpur, pp. 283294.
Sawaki, R.M. and Denholm, I. (1989) Insect resistance management revisited. In: McFarlane, N.R.
(ed.) British Crop Protection Council Monograph No. 43. Progress and Prospects in Insect
Control. British Crop Protection Council, Farnham, UK, pp. 191203.
Schillinger, J.A. and Gallun, R.L. (1968) Leaf pubescence of wheat as a deterrent to the cereal leaf
beetle, Oulema melanopus. Annals of the Entomological Society of America 61, 900903.
Schneider, F. (1948) Beitrag zar Kenntris Generationsverhaltnisse und Diapause rauberischer
Schwebiegen. Mitteilungen der Schweizerischen Entomologischen Gelleschaft 13, 124.
Schoneveld, J.A. and Ester, A. (1994) The introduction of systems for the supervised control of the
carrot y (Psila rosae F.) in the Netherlands. In: Finch, S. and Brunel, E. (eds) International
Control in Field Vegetable Crops. IOBC wprs Bulletin Vol. 17, pp. 5566.
Schooley, D.A. and Edwards, J.P. (1996) Anti juvenile hormones: from precocenes to peptides.
Brighton Crop Protection Conference: Pests and Diseases, Volume 3. British Crop Protection
Council, Farnham, UK, pp. 10291038.
Schroeder, H.E., Gollasch, S., Moore, A., Tabe, L.M., Craig, S., Hardie, D.C., Chrispeels, M.J., Spencer,
D. and Higgins, T.J.V. (1995) Bean amylase inhibitor resistance to the pea weevil (Bruchus piso-
rum) in transgenic peas (Pisum sativum L.). Plant Physiology 107, 12331239.
Schuster, M.F. (1980) Insect resistance in cotton. In: Harris, M.K. (ed.) Biology and Breeding for
Resistance to Arthropods and Pathogens in Agricultural Plants. Texas A & M University,
pp. 101112.
Scopes, N.E.A. (1969) The economics of mass rearing Encarsia formosa, a parasite of the whitey
Trialeurodes vaporariorum, for use in commercial horticulture. Plant Pathology 18, 130132.
384 References
Insect Refs 11/7/00 9:29 am Page 384
Scopes, N.E.A. and Biggerstaff, S.M. (1971) The production, handling and distribution of the whitey
Trialeurodes vaporariorum and its parasite Encarsia formosa for use in biological control pro-
grammes in glasshouses. Plant Pathology 20, 111116.
Scriven, R. and Meloan, C.E. (1986) The importance of particle size and bait position to the effective-
ness of boric acid and sodium borate as blatticides for the American cockroach, Periplaneta
americana. International Pest Control 28, 910.
Seaby, D.A. and Mowat, D.J. (1993) Growth changes in 20-year-old Sitka spruce Picea sitchensis after
attack by the green spruce aphid Elatobium abietinum. Forestry 66, 371379.
Seckler, D.M. and Cox, G. (1994) Population projections by the United Nations and the World Bank:
zero growth in 40 years. Discussion Paper No. 21. Winrock International Institute, Arlington VA.
Seeworthrum, S.L., Permalloo, S., Gungah, B., Soonnoo, A.R. and Alleck, M. (1998) Eradication of an
exotic fruit y from Mauritius. Proceedings of the 5th International Symposium on Fruities of
Economic Importance, Penang, Malaysia.
Sekhon, S.S. and Sajjan, S.S. (1987) Antibiosis in maize (Zea mays L.) to maize borer, Chilo partellus
(Swinhoe) (Pyralidae: Lepidoptera) in India. Tropical Pest Management 33, 5560.
Sengonca, C. and Frings, B. (1989) Enhancement of the green lacewing Chrysoperla carnea
(Stephens), by providing articial facilities for hibernation. Turkiye Entomoloji Dergisis 13,
245250.
Sengonca, C., Hoffman, A. and Kleinhenz, B. (1994) Investigations on development, survival and fer-
tility of the cereal aphids Sitobion avenae and Rhopalosiphum padi at different low tempera-
tures. Zeitschrift fur Angewandte Entomologie 117, 224233.
Senn, R., Hofer, D., Hoppe, T., Anst, M., Wyss, P., Brandl, F., Maiensch, P., Zang, L. and White, S.
(1998) CGA 293343: a novel broad-spectrum insecticide supporting sustainable agriculture
worldwide. The 1998 Brighton Conference: Pests and Diseases, Volume 1. British Crop
Protection Council, Farnham, UK, pp. 2736.
Service, M.W. (1993) Mosquito Ecology: Field Sampling Methods, 2nd edn. Elsevier Applied Science,
London, UK.
Settle, W.H., Ariawan, H., Astuti, E.T., Cahyana, W., Hakim, A.L., Hindayan, D., Lestari, A.S.,
Pajarningsih and Saartanto (1996) Managing tropical rice pests through conservation of general-
ist natural enemies and alternative prey. Ecology 77, 19751988.
Shaner, W.W., Philipp, P.F. and Schmehl, W.R. (1982) Farming Systems Research and Development:
Guidelines for Developing Countries. Westview Press, Boulder, Colorado, USA.
Shanower, T.G., Guiterrez, A.P. and Wightman, J.A. (1993) Effect of temperature on development
rates, fecundity and longevity of the groundnut leaf miner, Aproaerema modicella (Lepidoptera:
Gelechiidae), in India. Bulletin of Entomological Research 83, 413419.
Shapere, D. (1980) The structure of scientic revolution. In: Cutting, G. (ed.) Paradigms and
Revolutions. University of Notre Dame Press, Notre Dame, pp. 2738.
Shapiro, M. and Argauer, R. (1995) Effects of pH, temperature, and ultraviolet radiation on the activ-
ity of an optical brightener as a viral enhancer for the gypsy moth (Lepidoptera: Lymantriidae)
baculovirus. Journal of Economic Entomology 88, 16021606.
Shapiro, M. and Argauer, R. (1997) Components of the stilbene optical brightener Tinopal LPW as
enchancers for the gypsy moth (Lepidoptera: Lymantriidae) baculovirus. Journal of Economic
Entomology 90, 899904.
Sharp, J.L. (1986) Hot-water treatment for control of Anastrepha suspensa (Diptera: Tephritidae) in
mangos. Journal of Economic Entomology 79, 706708.
Sharp, J.L., Ouye, M.T., Hart, W., Ingle, S., Hallman, G., Gould, W. and Chew, V. (1989) Immersion of
Florida mangos in hot water as a quarantine treatment for Caribbean fruit y (Diptera:
Tephritidae). Journal of Economic Entomology 82, 186188.
Sheppard, C.A. and Smith, E.H. (1997) Entomological heritage. American Entomologist 142146.
Shoemaker, C.A. (1979) Optimal timing of multiple applications of pesticides with residual toxicity.
Biometrics 35, 803812.
Shoemaker, C.A. (1982) Optimal integrated control of univoltine pest populations with age structure.
Operations Research 30, 4061.
Shoemaker, C.A. (1984) The optimal timing of multiple applications of residual pesticides: determin-
istic and stochastic analyses. In: Conway, G.R. (ed.) Pest and Pathogen Control: Strategic,
Tactical and Policy Models. John Wiley and Sons, Chichester, pp. 290310.
References 385
Insect Refs 11/7/00 9:29 am Page 385
Shorey, H.H. (1976) Animal Communication by Pheromones. Academic Press, New York.
Shorey, H.H. (1977) Concepts and methodology involved in pheromone control of Lepidoptera by
disruption of premating communication. In: McFarlane, N.R. (ed.) Crop Protection Agents
Their Biological Evaluation. Academic Press, London, New York and San Francisco,
pp. 187200.
Shu-Sheng, L. (1985) Aspects of the numerical and functional responses of the aphid parasite
Aphidius sonchi in the laboratory. Entomologia Experimentalis et Applicata 37, 247256.
Siddiqui, W.H., Barlow, C.A. and Randolph, P.A. (1973) Effects of some constant and alternating tem-
peratures on population growth of the pea aphid, Acyrthosiphon pisum (Homoptera:
Aphididae). Canadian Entomologist 105, 145156.
Simmonds, F.J. (1968) Economics of biological control. PANS 14, 207215.
Simmonds, N.W. (1979) Principles of Crop Improvement. Longman, London and New York.
Simmons, A.M. and Yeargan, K.V. (1990) Effect of combined injuries from defoliation and green stink
bug (Hemiptera: Pentatomidae) and inuence of eld cages on soybean yield and seed quality.
Journal of Economic Entomology 83, 599609.
Sinclair, J.B. and Backman, P.A. (eds) (1989) Compendium of Soybean Diseases, 3rd edn. APS Press,
St. Paul, MN, USA.
Sinclair, J.B., Kogan, M. and McGlamery, M.D. (1997) Guidelines for the Integrated Management of
Soybean Pests. National Soybean Research Laboratory Publication No. 2, College of Agricultural,
Consumer and Environmental Sciences, University of Illinois at Urbana-Champaign, Urbana,
Illinois, USA.
Singh, B.B., Hadley, H.H. and Bernard, R.L. (1971) Morphology of pubescence in soybean and its
relationship to plant vigour. Crop Science 11, 1316.
Singh, D.P. (1986) Breeding for Resistance to Diseases and Insect Pests. Springer-Verlag, New York
and Heidelberg.
Singh, K.G. (1988) New pest threats and plant quarantine development in the Southeast Asia Region.
PLANTI News 7, 37.
Singh, R. and Ellis, P.R. (1993) Sources, mechanisms and bases of resistance in cruciferae to the cab-
bage aphid, Brevicoryne brassicae. IOBC/WPRS Bulletin 16, 235.
Singh, R., Ellis, P.R., Pink, D.A.C. and Phelps, K. (1994) An investigation of the resistance to cabbage
aphid in brassica species. Annals of Applied Biology 125, 457465.
Sivasubramaniam, W., Wratten, S.D. and Klimaszewski, J. (1997) Species composition, abundance,
and activity of predatory arthropods in carrot elds, Canterbury, New Zealand. New Zealand
Journal of Zoology 24, 205212.
Sloderbeck, P.E. and Yeargan, K.V. (1983) Green cloverworm (Lepidoptera: Noctuidae) populations in
conventional and double-crop, no-till soybeans. Journal of Economic Entomology 76, 785791.
Slovic, P. (1987) Perception of risk. Science 236, 280285.
Smart, E. and Stevenson, J.H. (1982) Laboratory estimation of toxicity of pyrethroid insecticides to
honey bees: relevance to hazard in the eld. Bee World 63, 150152.
Smart, L.E., Pickett, J.A. and Powell, W. (1997) Push-Pull strategies for pest control. Grain Legumes
15, 1415.
Smelser, R.B. and Pedigo, L.P. (1992) Soybean seed yield and quality reduction by bean leaf beetle
(Coleoptera: Chrysomelidae) pod injury. Journal of Economic Entomology 85, 24012403.
Smith, E.H. (1978) Integrated pest management needs teaching, research, and extension. In: Smith,
E.H. and Pimentel, D. (eds) Pest Control Strategies. Academic Press, New York, USA,
pp. 309329.
Smith, H.G. and Hallsworth, P.B. (1990) The effects of yellowing viruses on yield of sugar beet in
eld trials, 1985 and 1987. Annals of Applied Biology 116, 503511.
Smith, H.S. (1980) The effect of 10 generations of selection for oil and protein content in corn.
Bulletin of Illinois Agricultural Experimental Station 1907, 533.
Smith, J.G. (1969) Some effects of crop background on populations of aphids and their natural ene-
mies on Brussels sprouts. Annals of Applied Biology 63, 326330.
Smith, J.W., McKibben, G.H., Villavasao, J., McGovern, W.L. and Jones, R.G. (1994) Management of
the cotton boll weevil with attract-and-kill devices. In: Constable, G.A. and Forester, N.W. (eds)
Proceedings of the World Cotton Research Conference, No. 1. CSIRO, Brisbane, Australia,
pp. 480484.
386 References
Insect Refs 11/7/00 9:29 am Page 386
Smith, P. (1983) Farming partly an art, partly a science. 10th International Congress of Plant
Protection 1983, Plant Protection for Human Welfare, Brighton, Volume 1, pp. 5660.
Smith, P. (1995) Pesticides in foodstuffs. In: Best, G.A. and Ruthven, A.D. (eds) Pesticides
Developments, Impacts, and Controls. The Royal Society of Chemistry, London, UK,
pp. 6273.
Smith, R.F. and Reynolds, H.T. (1966) Principles, denitions and scope of integrated pest control.
Proceedings of FAO (United Nations Food and Agriculture Organisation) Symposium on
Integrated Pest Control 1, 1117.
Smits, P.H. (1997) Insect pathogens: their suitability as biopesticides. In: Evans, H.F. (ed.) British
Crop Protection Council Symposium Proceedings No. 68. Microbial Insecticides: Novelty or
Necessity?. British Crop Protection Council, Farnham, UK, pp. 2128.
Snedecor, G.W. and Cochran, W.G. (1978) Statistical Methods. Iowa State University Press, Ames,
Iowa.
Snyder, R.G. (1993) The U.S. greenhouse vegetable industry update and greenhouse vegetables in
Mississippi. In: Carpenter, T.D. and Gibbs, C.R. (eds) Proceedings of American Greenhouse
Vegetable Growers Conference and Trade Show. Denver, CO, USA.
Soderland, D.M. and Bloomquist, J.R. (1990) Molecular mechanisms of insecticide resistance. In:
Roush, R.T. and Tabashnik, B.R. (eds) Pesticide Resistance in Arthropods. Chapman and Hall,
New York and London, pp. 58196.
Soderstrom, E.L. and Brandl, D.G. (1982) Antifeeding effect of modied atmospheres on larvae of the
navel orangeworm and Indianmeal moths (Lepidoptera: Pyralidae). Journal of Economic
Entomology 75, 704705.
Soderstrom, E.L., Gardner, P.D., Baritelle, J.L., Nolan de Lozano, K. and Brandl, D.G. (1984) Economic
cost evaluation of a generated low-oxygen atmosphere as an alternative fumigant in the bulk
storage of raisins. Journal of Economic Entomology 77, 457461.
Solomon, M.G. (1981) Windbreaks as a source of orchard pests and predators. In: Thresh, J.M. (ed.)
Pests, Pathogens and Vegetation. Pitman, London, pp. 273283.
Solomon, M.G. (1989) The role of natural enemies in top fruit. Proceedings of the Symposium on
Insect Control Strategies and the Environment. Amsterdam, pp. 7085.
Solomon, M.G., Fitzgerald, J.D. and Murray, R.A. (1996) Electrophoretic approaches to predatorprey
interactions. In: Symondson, W.O.C. and Liddell, J.E. (eds) The Ecology of Agricultural Pests.
Chapman & Hall, London, pp. 457468.
Song, Y.H., Heong, K.L., Lazaro, A.A. and Yeun, K.S. (1994) Use of geographical information systems
to analyse large area movement and dispersal of rice insects in South Korea. In: Teng, P.S.,
Heong, K.L. and Moody, K. (eds) Rice Pest Science and Management. International Rice
Research Institute, Los Banos, Philippines, pp. 3142.
Sopp, P.I. and Sunderland, K.D. (1989) Some factors affecting the detection period of aphid remains
in predators using ELISA. Entomologia Experimentalis et Applicata 51, 1120.
Sopp, P.I., Sunderland, K.D., Fenlon, J.S. and Wratten, S.D. (1992) An improved quantitative method
for estimating invertebrate predation in the eld using an enzyme-linked immunosorbent assay
(ELISA). Journal of Applied Ecology 79, 295302.
Sorenson, W.C. (1995) Brethren of the Net, American Entomology 18401880. University of Alabama
Press, Tuscaloosa, AL, USA.
Soroka, J.J. and Mackay, P.A. (1991) Antibiosis and antixenosis to pea aphid (Homoptera: Aphididae)
in cultivars of eld peas. Journal of Economic Entomology 84(6), 195196.
Southwood, T.R.E. (1975) The dynamics of insect populations. In: Pimentel, D. (ed.) Insects, Science
and Society. Academic Press, New York, USA, pp. 151199.
Southwood, T.R.E. (1977a) The relevance of population dynamic theory to pest status. In: Cherrett,
J.M. and Sagar, G.R. (eds) Origin of Pest, Parasite, Disease and Weed Problems. Blackwell
Scientic Publications, Oxford, pp. 3554.
Southwood, T.R.E. (1977b) Habitat, the templet for ecological strategies? Journal of Animal Ecology
46, 337365.
Southwood, T.R.E. (1978) Ecological Methods, with Particular Reference to the Study of Insect
Populations, 2nd edn. Chapman & Hall, London.
Southwood, T.R.E. and Comins, H.N. (1976) A synoptic population model. Journal of Animal
Ecology 45, 949965.
References 387
Insect Refs 11/7/00 9:29 am Page 387
Southwood, T.R.E. and Jepson, W.F. (1962) Studies on the populations of Oscinella frit L. (Diptera:
Chloropidae) in the oat crop. Journal of Animal Ecology 31, 481495.
Southwood, T.R.E. and Norton, G.A. (1973) Economic aspects of pest management strategies and
decisions. Memoirs of the Ecological Society of Australia 1, 168184.
Soyatech Inc. (1995) Soya Bluebook. Soyatech Inc., Bar Harbor, ME, USA.
Spedding, C.R.W. (1996) Agriculture and the Citizen. Chapman & Hall, London, UK.
Spedding, C.R.W. (1998) 1992 Modern Agriculture: the role and impact of technology, legislation and
public opinion. In: Lewis, T. (ed.) The Bawden Memorial Lectures. British Crop Protection
Council, Farnham, UK, pp. 227248.
Speight, M.R. and Wainhouse, D. (1989) Ecology and Management of Forest Insects. Oxford Science
Publishers, Clarendon Press, Oxford.
Spencer, J. and Dent, D.R. (1991) Walking speed as a variable in knapsack sprayer operation: percep-
tion of speed and the effect of training. Tropical Pest Management 37, 321323.
Spitters, C.J.T. (1990) Crop growth models: their usefulness and limitations. Acta Horticulture 267,
349368.
Srivastava, S.K. (1974) Some eld problems related to the use of pesticides in India. PANS 20,
323326.
Stapleton, J.J., Summers, C.G., Duncan, R.A. and Newton, A.S. (1994) Using reectorised spray mulch
to reduce yield losses of zucchini squash due to aphid-vectored virus diseases. Proceedings of the
9th Congress of the Mediterranean Phytopathological Union, Turkey, pp. 343346.
Stapleton, J.J., Summers, C.G., Turini, T.A. and Duncan, R.A. (1993) Effect of reective polyethylene
and spray mulches on aphid populations and vegetative growth of bell pepper. In: Lamont, W.J.
Jr. (ed.) Proceedings of the 24th National Agricultural Plastics Congress, Kansas, pp. 117122.
Star, J. and Estes, J. (1990) Geographic Information System An Introduction. Prentice Hall,
Englewood Cliffs, New Jersey.
Starks, K.J., Burton, R.L., Wilson, R.L. and Davis, F.M. (1982) Southwestern corn borer: inuence of
planting dates and times of infestation on damage to corn, pearl millet and sorghum. Journal of
Economic Entomology 75, 5760.
Steenwyk, R.A. van, Oatman, E.R. and Wyman, J.A. (1983) Density treatment level for tomato pin-
worm (Lepidoptera: Gelechiidae) based on pheromone trap catches. Journal of Economic
Entomology 76, 440445.
Steiner, L.F., Mitchell, W.C., Harris, E.J., Kozuma, T.T. and Fujimoto, M.S. (1965) Oriental fruit y
eradication by male annihilation. Journal of Economic Entomology 58, 961964.
Stenseth, N.C. (1981) How to control pest species: application of models from the theory of island
biogeography in formulating pest control strategies. Journal of Applied Ecology 18, 77394.
Stenseth, N.C. (1987) Evolutionary processes and insect outbreaks. In: Barbosa, P. and Schultz, J.C.
(eds) Insect Outbreaks. Academic Press, San Diego and London, pp. 533564.
Stephens, S.G. (1957) Sources of resistance of cotton strains to the boll weevil and their possible uti-
lization. Journal of Economic Entomology 50, 415418.
Stern, V.M., Smith, R.F., Bosch, R. van den and Hagen, K.S. (1959) The integrated control concept.
Hilgardia 29, 81101.
Stevens, R.E., Gutierrez, A.P. and Butler, G.P. (1994) An algorithm for temperature-dependent growth
rate simulation. Canadian Entomologist 106, 519524.
Stewart, S., Reed, J., Luttrell, R. and Harris, F.A. (1998) Cotton insect control strategy project: com-
paring Bt with conventional cotton management and plant bug control strategies at ve locations
in Mississippi, 19957. Proceedings 1998 Beltwide Cotton Conference, pp. 8071672.
Stinner, B.R. and House, G.J. (1990) Arthropods and other invertebrates in conservation-tillage agri-
culture. Annual Review of Entomology 35, 299318.
Stinner, R.E., Gutierrez, A.P. and Butler, G.P. (1974) An algorithm for temperature-dependent growth
rate simulation. Canadian Entomologist 106, 519524.
Stone, N.D. and Gutierrez, A.P. (1986a) Pink bollworm control in Southwestern desert cotton. I. A
eld oriented simulation of pink bollworm in south western desert cotton. Hilgardia 54, 124.
Stone, N.D. and Gutierrez, A.P. (1986b) Pink bollworm control in Southwestern desert cotton. II. A
strategic management model. Hilgardia 54, 124.
Stone, R. (1992) Researchers score victory over pesticides and pests in Asia. Science 256,
12721273.
388 References
Insect Refs 11/7/00 9:29 am Page 388
Stower, W.J. and Greathead, D.J. (1969) Numerical changes in a population of the desert locust, with
special reference to factors responsible for mortality. Journal of Applied Ecology 6, 203235.
Strickberger, M.W. (1976) Genetics 2nd edn. Macmillan Publishing Company, New York and Collier
Macmillan Publishers, London.
Strong, D.R., Lawton, J.H. and Southwood, R. (1984) Insects on Plants Community Patterns and
Mechanisms. Blackwell Scientic Publications, Oxford, UK.
Stbler, H. and Kern, M. (1998) Biotechnology in crop protection and crop production: the view from
industry. In: Richter, J., Huber, J. and Schuler, B. (eds) Biotechnology for Crop Protection its
Potential for Developing Countries. Seutsche Stiftung fr Internationale Entwicklung, Feldang,
Germany, pp. 3549.
Su, N.-Y. (1994) Field evaluation of hexaumuron bait for population suppression of subterranean
termites (Isoptera: Rhinotermitidae). Journal of Economic Entomology 87, 389397.
Su, N.-Y. and Scheffrahn, R.H. (1998) A review of subterranean termite control practices and
prospects for integrated pest management programmes. Integrated Pest Management Reviews 3,
114.
Su, N.-Y., Tamashiro, M. and Yates, J.R. (1982) Trials on the Field Control of the Formosan
Subterranean Termite with Amdro Bait. The International Research Group on Wood
Preservation. Document No. IRG/WP/1163, Stockholm, Sweden.
Su, N.-Y, Scheffrahn, R.H. and Ban, P.M. (1995) Effects of suluramid-treated bait blocks on eld
colonies of the formosan subterranean termite (Isoptera: Rhinotermitidae). Journal of Economic
Entomology 88, 13431348.
Subramanyan, B. and Hagstrum, D.W. (1991) Quantitative analysis of temperature, relative humidity,
and diet inuencing development of the larger grain borer, Prostephanus truncatus (Horn)
(Coleoptera Bostrichidae). Tropical Pest Management 37, 195202.
Sumberg, J. and Okali, C. (1989) Farmers, on-farm research and new technology. In: Chambers, R.,
Pacey, A. and Thrupp, L.A. (eds) Farmer First. Farmer Innovation and Agricultural Research.
Intermediate Technology Publications, London, UK, pp. 189207.
Summers, C.G. (1992) Integrated pest management in the alfalfa agroecosystem. Proceedings of the
11th Nevada Alfalfa Symposium, 56 February 1992, Sparks, Nevada. University of Nevada
Cooperative Extension Service, Reno, Nevada, pp. 119126.
Summers, C.G., Stapleton, J.J., Newton, A.S., Duncan, R.A. and Hart, D. (1995) Comparison of
sprayable and lm mulches in delaying the onset of aphid-transmitted virus diseases in zuc-
chini squash. Plant Disease 79, 11261131.
Sunderland, K.D. (1975) The diet of some predatory arthropods in cereal crops. Journal of Applied
Ecology 12, 507515.
Sunderland, K.D., de Snoo, G.R., Dinter, A., Hance, T., Helenius, J., Jepson, P., Kromp, B., Samu, F.,
Sotherton, N.W., Toft, S. and Ulber, B. (1995) Density estimation for invertebrate predators in
agroecosystems. Acta Jutlandica 70, 133164.
Sunderland, K.D., Fraser, A.M. and Dixon, A.F.G. (1986) Field and laboratory studies on money spi-
ders (linyphiidae) as predators of cereal aphids. Journal of Applied Ecology 23, 433447.
Sutter, G.R. and Branson, T.F. (1980) A procedure for articially infesting eld plot with corn root-
worm eggs. Journal of Economic Entomology 73, 135137.
Swanson, E.R. (1979) Working with other disciplines. American Journal of Agricultural Economics
61, 849859.
Symondson, W.O.C. and Hemingway, J. (1997) Biochemical and molecular techniques. In: Dent, D.R.
and Walton, M.P. (eds) Methods in Ecological and Agricultural Entomology. CAB International,
Wallingford, UK, pp. 293350.
Symondson, W.O.C. and Liddell, J.E. (1995) Decay rates for slug antigens within the carabid predator
Pterostichus melanarius monitored with a monoclonal antibody. Entomologia Experimentalis et
Applicata 75, 245250.
Symondson, W.O.C. and Liddell, J.E. (eds) (1996) The Ecology of Agricultural Pests. Chapman & Hall,
London, UK.
Szmedra, P.I., Wetzstein, M.E. and McClendon, R.W. (1990) Economic threshold under risk: a case
study of soybean production. Journal of Economic Entomology 83, 641646.
Tabashnik, B.E. and Mau, R.F.L. (1986) Suppression of diamondback moth (Lepidoptera: Plutellidae)
oviposition by overhead irrigation. Journal of Economic Entomology 79, 189191.
References 389
Insect Refs 11/7/00 9:29 am Page 389
Tait, E.J. (1987) Planning an integrated pest management system. In: Burn, A.J., Coaker, T.H. and
Jepson, P.C. (eds) Integrated Pest Management. Academic Press, London, pp. 189207.
Taneja, S.L. and Jayaswal, A.P. (1981) Capture threshold of pink bollworm moths on Hirsutum cot-
ton. Tropical Pest Management 27, 318324.
Tang, J.Y., Cheng, J.A. and Norton, G.A. (1994) HOPPER an expert system for forecasting the risk of
white-backed planthopper attack in the rst crop season in China. Crop Protection 13(6), 463474.
Tanigoshi, L.K., Fargerlund, J., Nishio-Wong, J.Y. and Grifths, H.J. (1985) Biological control of citrus
thrips, Scirtothrips citri (Thysanoptera: Thripidae), in southern California citrus groves.
Environmental Entomology 14, 733741.
Tanton, M.T. (1962) The effect of leaf toughness on the feeding of larvae of the mustard beetle
Phaedon cochleariae Fab. Entomologia Experimentalis et Applicata 5, 7478.
Taylor, A.D. (1988) Parasitoid competition and the dynamics of host-parasitoid models. American
Naturalist 132, 417436.
Taylor, A.D. (1990) Metapopulations, dispersal, and predator-prey dynamics: an overview. Ecology
71, 429433.
Taylor, A.D. (1991) Studying metapopulation effects in predator-prey systems. Biological Journal of
the Linnean Society 72, 305323.
Taylor, L.R. (1961) Aggregation, variance and the mean. Nature 189, 732735.
Taylor, L.R. (1962a) The absolute efciency of insect suction traps. Annals of Applied Biology 50,
405421.
Taylor, L.R. (1962b) The efciency of cylindrical sticky insect traps and suspended nets. Annals of
Applied Biology 50, 681685.
Taylor, L.R. (1963) Analysis of the effect of temperature on insects in ight. Journal of Animal
Ecology 32, 99117.
Taylor, L.R. (1974) Monitoring change in the distribution and abundance of insects. Report of
Rothamsted Experimental Station for 1973, Part 2, 202239.
Taylor, W.E. and Bardner, R. (1968) Leaf injury and food consumption by larvae of Phaedon
cochleariae (Coleoptera: Chrysomelidae) and Plutella maculipennis (Lepidoptera: Plutellidae)
feeding on turnip and radish. Entomologia Experimentalis et Applicata 11, 177184.
Teetes, G.L. (1980) Breeding sorghums resistant to insects. In: Maxwell, F.G. and Jennings, P.R. (eds)
Breeding Plants Resistant to Insects. John Wiley and Sons, Chichester, pp. 457485.
Teetes, G.L. (1991) The environmental control of insects using planting times and plant spacing. In:
Pimentel, D. (ed.) Handbook of Pest Management in Agriculture, Volume 1, 2nd edn. CRC, Boca
Raton, Florida, USA, pp. 169182.
Teng, P.S. (1990) Integrated Pest Management in Rice: An Analysis of the Status Quo with
Recommendations for Action. Department of Plant Pathology, IRRI, Manila, Philippines.
Theunissen, J. and Den Ouden, H. (1980) Effects of intercropping with Spergula arvensis on pests of
Brussels sprouts. Entomologia Experimentalis et Applicata 27, 260268.
Thomas, D.J.I., Morgan, J.A.W., Whipps, J.M. and Saunders, J.R. (1997) Plasmid transfer by the insect
pathogen Bacillus thuringiensis in the environment. In: Evans, H.F. (ed.) British Crop Protection
Council Symposium Proceedings No. 68. Microbial Insecticides: Novelty or Necessity?. British
Crop Protection Council, Farnham, UK, pp. 361365.
Thomas, M. and Waage, J. (1996) Integration of Biological Control and Host Plant Resistance.
Technical Centre for Agricultural and Rural Cooperation, Wageningen, The Netherlands; CAB
International, Wallingford, UK.
Thomas, M.B., Blanford, S., Gbongboui, C. and Lomer, C.J. (1998) Experimental studies to evaluate
spray applications of a mycoinsecticide against the rice grasshopper, Hieroglyphus daganensis,
in northern Benin. Entomologia Experimentalis et Applicata 87, 93102.
Thomas, M.B., Wratten, S.D. and Sotherton, N.W. (1991) Creation of island habitats in farmland to
manipulate populations of benecial arthropods: predator densities and emigration. Journal of
Applied Ecology 28, 906917.
Thomas, M.B., Wratten, S.D. and Sotherton, N.W. (1992) Creation of island habitats in farmland to
manipulate populations of benecial arthropods: predator densities and species composition.
Journal of Applied Ecology 29, 524531.
Thomas, R.C. and Miller, H.G. (1994) The interaction of green spruce aphid and fertilizer applica-
tions on the growth of Sitka spruce. Forestry 67, 329342.
390 References
Insect Refs 11/7/00 9:29 am Page 390
Thompson, G.D. (1997) Industry and individual companys perspective on resistance management.
Resistant Pest Management 9, 68.
Thompson, K.F. (1963) Resistance to the cabbage aphid (Brevicoryne brassicae) in brassica plants.
Nature 198, 209.
Thorne, G.N. (1986) Confessions of a narrow-minded applied biologist, or why do interdisciplinary
research? Annals of Applied Biology 108, 205217.
Thurston, R., Smith, W.T. and Cooper, B. (1966) Alkaloid secretion by trichomes of Nicotiana species
and resistance to aphids. Entomologia Experimentalis et Applicata 9, 428432.
Tingey, W.M. and Lamont, W.J. Jr. (1988) Insect abundance in eld beans altered by intercropping.
Bulletin of Entomological Research 78, 527535.
Tisdell, C. (1990) Economic impact of biological control of weeds and insects. In: Mackauer, M.,
Ehler, L.E. and Roland, J. (eds) Critical Issues in Biological Control. Intercept, Andover,
pp. 301316.
Titmarsh, I.J. (1992) Mortality of immature Lepidoptera, a case study with Heliothis species.
(Lepidoptera: Noctuidae) in agricultural crops on the Darling Downs. PhD thesis, University of
Queensland, Brisbane, Australia.
Toba, H.H., Kishaba, A.N., Wolf, W.W. and Gisbon, T. (1970) Spacings of screen traps baited with
synthetic sex-pheromone of the cabbage looper. Journal of Economic Entomology 63, 197200.
Todd, J.W. and Schumann, F.W. (1988) Combination of insecticide applications with trap crops of
early maturing soybean and southern peas for population management of Nezara viridula in
soybean (Hemiptera: Pentatomidae). Journal of Entomological Science 23, 192199.
Todd, J.W., McPherson, R.M. and Boethel, D. (1994) Management tactics for soybean insects. In:
Higley, L.G. and Boethel, D.J. (eds) Handbook of Soybean Insect Pests. Entomological Society of
America, Lanham, MD, USA, pp. 115117.
Townley-Smith, T.F. and Hurd, E.A. (1973) Use of moving means in wheat yield trials. Canadian
Journal of Plant Science 53, 447450.
Travasso, M.I., Caldiz, D.O. and Saluzzo, J.A. (1986) Yield prediction using the SUBSTOR-potato
model under Argentinian conditions. Potato Research 39, 305312.
Troxclair, N.N. Jr. and Boethel, D.J. (1984) Inuence of tillage practices and row spacing on soybean
insect populations in Louisiana. Journal of Economic Entomology 77, 15711579.
Tucker, M.R. (1984a) Possible sources of outbreaks of the armyworm, Spodoptera exempta (Walker)
(Lepidoptera: Noctuidae), in East Africa at the beginning of the season. Bulletin of
Entomological Research 74, 599607.
Tucker, M.R. (1984b) Forecasting the severity of armyworm seasons in East Africa from early season
rainfall. Insect Science Application 5(1), 5155.
Tucker, M.R. and Pedgeley, D.E. (1983) Rainfall and outbreaks of the African armyworm, Spodoptera
exempta (Walker) (Lepidoptera: Noctuidae). Bulletin of Entomological Research 73, 195199.
Tucker, M.R., Mwandoto, S. and Pedgley, D.E. (1982) Further evidence for windborne movement of
armyworm moths, Spodoptera exempta, in East Africa. Ecological Entomology 7, 763773.
Tukahirwa, E.M. and Coaker, T.H. (1982) Effect of mixed cropping on some insect pests of brassicas;
reduced Brevicoryne brassicae infestations and inuences on epigeal predators and the distur-
bance of oviposition behaviour in Delia brassicae. Entomologia Experimentalis et Applicata 32,
129140.
Turchin, P., Odendaal, F.J. and Rausher, M.D. (1991) Quantifying insect movement in the eld.
Environmental Entomology 20, 955963.
Turnbull, A.L. and Chant, D.A. (1961) The practice and theory of biological control of insects in
Canada. Canadian Journal of Zoology 39, 697753.
Turnock, W.J. (1972) Geographical historical variability in population patterns and life systems of the
larch sawy. Canadian Entomologist 104, 18831900.
Unterstenhofen, G. (1976) The basic principles of crop protection eld trials. Panzenschultz-
Nachrichten Bayer 29, 85.
Usherwood, P.N.R. and Blagborough, I.S. (1989) Amino-acid synapses and receptors. In: McFarlane,
N.R. (ed.) British Crop Protection Council Monograph No. 43. Progress and Prospects in Insect
Control. British Crop Protection Council, Farnham, UK, pp. 4558.
Usherwood, P.N.R., Duce, I.R. and Boden, P. (1984) Slowly reversible block of glutamate receptor
References 391
Insect Refs 11/7/00 9:29 am Page 391
channels by venoms of Argiope trifasciata and araneus gemma. Journale de Physiologie (Paris)
79, 169171.
Uthamasamy, S. (1986) Studies on the resistance in okra, Abelmoschus esculentus (L.) Moench. to
the leafhopper Amrasca devastans (Dist.). Tropical Pest Management 32, 146147.
Uvah, I.I.I. and Coaker, T.H. (1984) Effect of mixed cropping on some insect pests of carrots and
onions. Entomologia Experimentalis et Applicata 36, 159167.
Vaeck, M., Reynaerts, A., Hofte, H., Jansens, S., DeBeuckeleer, M., Dean, C., Zabeau, M., Montagu, M.
van and Leemans, J. (1987) Transgenic plants protected from insect attack. Nature 328, 3337.
Vale, G.A. (1982) The trap-orientated behaviour tsetse ies (Glossinidae) and other Diptera. Bulletin
of Entomological Research 72, 7193.
Vale, G.A., Bursell, E. and Hargrove, J.W. (1985) Catching-out the tsetse y. Parasitology Today 1,
106110.
Valentine, B.J., Gurr, G.M. and Thwaite, W.G. (1996) Efcacy of the insect growth regulators
tebufenozide and fenoxycarb for lepidopteran pest control in apples, and their compatibility
with biological control for integrated pest management. Australian Journal of Experimental
Agriculture 36, 501506.
Valentine, W.J., Newton, C.M. and Talevio, R.L. (1976) Compatible systems and decision models for
pest management. Environmental Entomology 5, 891900.
van de Fliert, E. (1992) Risk and Reward of IPM Implementation and Good Farmers and IPM
Farmers. Internal Report, National Programme for Development and Training of Integrated Pest
Management in Rice-Based Cropping Systems, Indonesia.
van den Bosch, J. and Messenger, P.S. (1973) Biological Control. International Textbook Company,
Limited, Aylesbury, UK.
van den Bosch, R. (1978) The Pesticide Conspiracy. Doubleday, Garden City, NY, USA.
van den Bos, J. and Rabbinge, R. (1976) Simulation of the Fluctuations of the Grey Larch Bud Moth.
Pudoc, Wageningen, The Netherlands.
van den Ende, E., Blommers, L. and Trapman, M. (1996) Gaby: a computer-based decision support
system for integrated pest management in Dutch apple orchards. Integrated Pest Management
Reviews 1, 147162.
van den Ende, J.E. (1994a) Practical use of a computer based advisory system for IPM in apple.
Mededelingen Faculteit Landbouwkundige en Toegepaste Biologische Wetenschappen
Universiteit Gent 5913, 12411245.
van den Ende, J.E. (1994b) Op maat gesneden voorlichting via de computer. Fruitteelt 15, 2223.
van der Kraan, C. and Deventer, G.C. (1982) Range of action and interaction of pheromone traps for
the summerfruit tortrix moth Adoxophyes orana (F.v.R.). Journal of Chemical Ecology 8,
12511262.
van der Plank, J.E. (1963) Plant Diseases: Epidemics and Control. Academic Press, New York.
van Driesche, R.G. (1983) The meaning of percent parasitism in studies of insect parasitoids.
Environmental Entomology 12, 16111622.
van Driesche, R.G. and Bellows, T.S. Jr. (1996) Biological Control. Chapman & Hall, London, UK.
van Duyn, J.W., Turnipseed, S.G. and Maxwell, H.D. (1972) Resistance in soybeans to the Mexican
bean beetle. II. Reactions to the beetle to resistant plants. Crop Science 12, 561562.
van Emden, H.F. and Peakall, D.B. (1996) Beyond Silent Spring. Chapman & Hall, London, UK.
Van Emden, H.F., Hughes, R.D., Eastop, V.R. and Way, M.J. (1969) The ecology of Myzus persicaei.
Annals of Applied Biology 14, 197270.
Van Hamburg, H. and Hassell, M.P. (1984) Density dependence and augmentative release of egg para-
sitoids against graminaceous stalkborers. Ecological Entomology 9, 101108.
van Lenteren, J.C. (1986) Parasitoids in the greenhouse: successes with seasonal inoculative release
systems. In: Waage, J. and Greathead, D. (eds) Insect Parasitoids. Academic Press, London,
pp. 341374.
van Lenteren, J.C. (1987) Environmental manipulation advantageous to natural enemies of pests. In:
Delucchi, V. (ed.) Integrated Pest Management, Protection Integre: Quo Vadis? An International
Perspective. Parasitis 86, Geneva, pp. 123163.
van Lenteren, J.C. (1989) Implementation and commercialization of biological control in western
Europe. Proceedings and Abstracts. International Symposium of Biological Control
Implementation. North American Plant Protection Bulletin 6, 5070.
392 References
Insect Refs 11/7/00 9:29 am Page 392
van Lenteren, J.C. (1992a) Insect invasions: origins and effects. In: Ecological Effects of Genetically
Modied Organisms. Netherlands Ecological Society, Amsterdam, The Netherlands,
pp. 5990.
van Lenteren, J.C. (1992b) Biological control in protected crops: where do we go? Pesticide Science
36, 321327.
van Lenteren, J.C. (1993) Biological control and integrated pest management in glasshouses a com-
mercial success. Pesticide Science, 37, 430432.
van Lenteren, J.C. (1995) Integrated pest management in protected crops. In: Dent, D.R. (ed.)
Integrated Pest Management. Chapman & Hall, London.
van Lenteren, J.C. (1997) Benets and risks of introducing exotic macro-biological control agents into
Europe. Bulletin OEPP/EPPO Bulletin 27, 1527.
van Lenteren, J.C. and Woets, J. (1988) Biological and integrated pest control in greenhouses. Annual
Review of Entomology 33, 239269.
van Lenteren, J.C., Roskam, M.M. and Timmer, R. (1997) Commercial mass production and pricing of
organisms for biological control of pests in Europe. Biological Control 10, 143149.
van Tol, N.B. and Lentz, G.L. (1998) Inuence of Bt cotton on benecial arthropod populations.
Proceedings of the 1998 Beltwide Cotton Conference, 10521054.
Vandermeer, J. (1989) The Ecology of Intercropping. Cambridge University Press, Cambridge.
Vandermeer, J. and Andow, D.A. (1986) Prophylactic and responsive components of an integrated
pest management program. Journal of Economic Entomology 79, 299302.
Vansteenkiste, G.C. (1984) Formulation, quantication and control of pest-crop processes. In:
Cavalloro, R. (ed.) Statistical and Mathematical Methods in Population Dynamics and Pest
Control, Proceedings of a Meeting of the EC Experts Group/Parma 2628 October 1983. A.A.
Balkema, Rotterdam and Boston, pp. 136146.
Varley, G.C. (1970) The need for life tables for parasites and predators. In: Rabb, R.L. and Guthrie,
F.E. (eds) Concepts of Pest Management. Proceedings of a Conference held at North Carolina
State University, 2527 March 1970, pp. 5970.
Varley, G.C. and Gradwell, G. R (1960) Key factors in population ecology. Journal of Animal Ecology
29, 399401.
Varley, G.C., Gradwell, G.R. and Hassell, M.P. (1973) Insect Population Ecology: An Analytical
Approach. Blackwell Scientic Publications, Oxford.
Vaughn, T.T. and Hoy, C.W. (1993) Effects of leaf age, injury, morphology, and cultivars on feeding
behaviour of Phylloteta cruciferae (Coleoptera: Chrysomelidae). Environmental Entomology 22,
418424.
Verhalen, L.M., Baker, J.L. and McNew, R.W. (1975) Gardners grid system and plant selection ef-
ciency in cotton. Crop Science 57, 863864.
Verma, B.R., Lal, B. and Wadhi, S.R. (1988) A quarantine note on Prostephantus truncatus a pest
that needs to be watched. Current Science 57, 863864.
Vet, L.E.M., van Lenteren, J.C. and Woets, J. (1980) The parasite-host relationship between Encarsia
formosa (Hymenoptera: Aphelinidae) and Trialeurodes vaporariorum (Homoptera: Aleyrodidae).
Zeitschrift fr angewandte Entomologie 90, 2651.
Vickerman, G.P. (1982) Distribution and abundance of cereal aphid parasitoids (Aphidius spp.) on
grassland and winter wheat. Annals of Applied Biology 101, 185190.
Vickerman, G.P. (1988) Farm scale evaluation of the long-term effects of different pesticide regimes
on the arthropod fauna of winter wheat. In: Greeves, M.P., Grieg-Smith, P.W. and Smith, B.D.
(eds) Field Methods for the Environmental Study of the Effects of Pesticides. BCPC Monograph
No. 40. British Crop Protection Council, Farnham, UK, pp. 127135.
Vickerman, G.P. and Wratten, S.D. (1979) The biology and pest status of cereal aphids (Hemiptera:
Aphididae) in Europe: a review. Bulletin of Entomological Research 69, 132.
Villaloboss, F.J., Hall, A.J., Ritchie, J.T. and Orgaz, F. (1996) OILCROP-SUN: a development, growth
and yield model of the sunower crop. Agronomy Journal 88, 403415.
Vlug, H.J. and Paul, H. (1986) Sampling of leatherjackets. Mededelingen van de Faculteit
Landbouwwetenschappen Rijksuniversiteit Gent 51, 939942.
von Klinger, K. (1987) Effects of margin-strips along a winter wheat eld on predatory arthropods
and the infestation by cereal aphids. Journal of Applied Entomology 104, 4758.
References 393
Insect Refs 11/7/00 9:29 am Page 393
Waage, J.K. (1983) Aggregation in eld parasitoid populations: foraging time allocation by a popula-
tion of Diadegma (Hymenoptera: Ichneumonidae). Ecological Entomology 8, 447453.
Waage, J.K. (1984) Sperm competition and the evolution of odonate mating systems. In: Smith, R.L.
(ed.) Sperm Competition and the Evolution of Animal Mating Systems. Academic Press, New
York, USA, pp. 257290.
Waage, J.K. (1989) Ecological theory and the selection of biological control agents. In: Mackauer, M.,
Ehler, L.E. and Roland, J. (eds) Critical Issues in Biological Control. Intercept, Andover, UK,
pp. 141.
Waage, J.K. (1990) Ecological theory and the selection of biological control agents. In: Mackauer, M.,
Ehler, L.E. and Roland, J. (eds) Critical Issues in Biological Control. Intercept, Andover, UK,
pp. 13558.
Waage, J.K. (1993) Making IPM work: developing country experiences and prospects. In: Srivastava,
J.P. and Alderman, H. (eds) Agriculture and Environmental Challenges. Proceedings of the
Thirteenth Agricultural Sector Symposium. World Bank, Washington DC, USA, pp. 119134.
Waage, J.K. (1996) Introduction to the Symposium. In: Waage, J.K. (ed.) Biological Control
Introductions Opportunities for Improved Crop Production, BCPC Proceedings No. 67. British
Crop Protection Council, Farnham, UK, pp. 311.
Waage, J.K. (1997) Biopesticides at the cross-roads: IPM products or chemical clones. In: Evans, H.F.
(ed.) British Crop Protection Council Symposium Proceedings No. 68. Microbial Insecticides:
Novelty or Necessity?. British Crop Protection Council, Farnham, UK, pp. 1119.
Waage, J.K. and Greathead, D.J. (eds) (1986) Insect Parasitoids. Academic Press, London, UK.
Waage, J.K. and Greathead, D.J. (1988) Biological control: challenges and opportunities.
Philosophical Transactions of the Royal Society B 318, 111128.
Waage, J.K. and Hassell, M.P. (1982) Parasitoids as biological control agents a fundamental
approach. Parasitology 84, 241268.
Waage, J.K. and Mills, N.J. (1992) Biological control. In: Crawley, M.J. (ed.) Natural Enemies: The
Population Biology of Predators, Parasites and Diseases. Blackwell Scientic Publications,
Oxford, UK, pp. 412430.
Waddill, H. van, Pohronezny, K., McSorley, R. and Bryan, H.H. (1984) Effect of manual defoliation on
pole bean yield. Journal of Economic Entomology 77, 10191023.
Waggoner, P.E. and Berger, R.D. (1987) Defoliation, disease and growth. Phytopathology 77, 39398.
Waibel, H. (1987) Farmers practices and recommended economic threshold levels in irrigated rice in
the Philippines. In: Tait, J. and Napompeth, B. (eds) Management of Pests and Pesticides,
Farmers Perceptions and Practises. Westview Press, Boulder and London, pp. 191197.
Walgate, R. (1990) Miracle or Menace? Biotechnology and the Third World. The Panos Institute,
London, UK.
Walker, C.H., Hopkin, S.P., Sibly, R.M. and Peakall, D.B. (1996) Principles of Ecotoxicology. Taylor &
Francis, London.
Walker, P.T. (1981) Methods for studying the pest/yield relationship and for appraising losses due to
insects and mites. In: Chiarappa, L. (ed.) Crop Loss Assessment Methods, FAO Manual on the
Evaluation and Prevention of Losses by Pest, Disease and Weeds. Commonwealth Agricultural
Bureaux, Slough, UK, pp. 7378.
Walker, P.T. (1987) Losses in yield due to pests in tropical crops and their value in policy decision-
making. Insect Science and its Application 8, 665671.
Wall, C. (1990) Principles of monitoring. In: Ridgway, R.L., Silverstein, R.M. and Inscoe, M.N. (eds)
Behaviour-modifying Chemicals for Insect Management. Applications of Pheromones and other
Attractants. Marcel Dekker, New York and Basel, pp. 923.
Wall, R. (1995) Fatal attraction: the disruption of mating and fertilisation for insect control. In:
Leather, S.R. and Hardie, J. (eds) Insect Reproduction. CRC Press, Cambridge, pp. 109128.
Wall, R. and Howard, J. (1994) Autosterilisation for control of the housey Musca domestica. Journal
of Theoretical Biology 171, 431437.
Wall, R. and Shearer, D. (1997) Veterinary Entomology. Chapman & Hall, London.
Wall, R., Green, C.H., French, N. and Morgan, K.L. (1992) Development of an attractive target for the
sheep blowy Lucilia sericata. Medical and Veterinary Entomology 6, 6774.
Walsh, D.B., Zalom, F.G., Welch, N.C., Pickel, C. and Shaw, D.V. (1997) Pretransplant cold storage of
394 References
Insect Refs 11/7/00 9:29 am Page 394
strawberries: effects on plant vigor, yield and spider mite (Acari: Tetranychidae) abundance.
Journal of Economic Entomology 90, 818823.
Walsh, G.R. (1985) An Introduction to Linear Programming, 2nd edn. Wiley-Interscience
Publications, John Wiley & Sons, Chichester, UK.
Walton, M.P. and Dent, D.R. (1997) Introduction. In: Dent, D.R. and Walton, M.P. (eds) Methods in
Ecological and Agricultural Entomology. CAB International, Wallingford, UK, pp. 14.
Walton, M.P., Loxdale, H.D. and Allen-Williams, L. (1990a) Electrophoretic keys for the identica-
tion of parasitoids (Hymenoptera: Braconidae: Aphelinidae) attacking Sitobion avenae (F.)
(Hemiptera: Aphididae). Biological Journal of the Linnean Society 40, 333346.
Walton, M.P., Powell, W., Loxdale, H.D. and Allen-Williams, L (1990b) Electrophoresis as a tool for
estimating levels of hymenopterous parasitism in eld populations of the cereal aphid, Sitobion
avenae. Entomologia Experimentalis et Applicata 54, 271279.
Walton, S.B. (1998) MORPH: expediting the production and distribution of decision support systems
to the horticultural industry. The 1998 Brighton Conference: Pests and Diseases, Volume 1.
British Crop Protection Council, Farnham, UK, pp. 253258.
Ward, S.A., Rabbinge, R. and Mantel, W.P. (1985) The use of incidence counts for estimation of aphid
populations. 1. Minimum sample size for required accuracy. Netherlands Journal of Plant
Pathology 91, 9399.
Wardlow, L.R. (1992) The role of extension services in integrated pest management in glasshouse
crops in England. In: van Lenteren, J.C., Minks, A.K. and de Ponti, O.M.B. (eds) Biological
Control and Integrated Crop Protection: Towards Environmentally Safer Agriculture. Pudoc
Scientic Publishers, Wageningen, The Netherlands, pp. 193199.
Watanabe, T., Yamamoto, H. and Sogawa, K. (1994) Growth and yield analysis of rice plants infested
with long-distance migratory rice planthoppers. II. Measurement of recovery of vegetative
growth of rice plants infested with the white-backed planthopper, Sogatella furcifera Horvathe
(Homoptera: Delphacidae), by spectral reectivity. Japanese Journal of Applied Entomology and
Zoology 38, 169175.
Watt, A.D. (1983) The inuence of forecasting on cereal aphid control strategies. Crop Protection 2,
417429.
Watt, K.E.F. (1965) Community stability and the strategy of biological control. Canadian
Entomologist 97, 887895.
Way, M.J. and Banks, C.J. (1968) Population studies on the active stages of the black bean aphid,
Aphis fabae Scop., on its winter host Euonymus europaeus L. Annals of Applied Biology 62,
177197.
Way, M.J. and Murdie, G. (1965) An example of varietal variations in resistance of Brussels sprouts.
Annals of Applied Biology 56, 326328.
Way, M.J., Cammell, M.E., Taylor, L.R. and Woiwod, I.P. (1981) The use of egg counts and suction-
trap samples to forecast the infestation of spring-sown eld beans, Vicia faba, by the black bean
aphid, Aphis fabae. Annals of Applied Biology 98, 2134.
Wearing, C.H. (1988) Evaluating the IPM implementation process. Annual Review of Entomology 33,
1738.
Weaver, R.J., Marris, G.C., Olieff, S., Mosson, J.H. and Edwards, J.P. (1997) Role of ecotparasitoid
venom in the regulation of haemolymph ecdysteroid titres in a host noctuid moth. Archives of
Insect Biochemistry and Physiology 35, 169178.
Webster, C.C. and Wilson, P.N. (1980) Agriculture in the Tropics, 2nd edn. English Language Book
Society/Longman.
Webster, J.A., Smith, D.H., Rathke, H. and Cress, C.E. (1975) Resistance to cereal leaf beetle in wheat:
density and length of leaf-surface pubescence in four wheat lines. Crop Science 12, 561562.
Webster, J.P.G. and Bowles, R.G. (1996) Estimating the economic costs and benets of pesticide use in
apples. Brighton Crop Protection Conference: Pests and Diseases, Volume 1. British Crop
Protection Council, Farnham, UK, pp. 325330.
Weidhaas, D.E., Schmidt, E.L. and Seabrook, E.L. (1962) Field studies on the release of sterile males
for the control of Anopheles quadrimaculatus. Mosquito News 22, 283.
Welsh, J. and McClelland, M. (1990) Fingerprinting genomes using PCR with arbitrary primers
(RAPDs). Nucleic Acids Research 18, 72137218.
References 395
Insect Refs 11/7/00 9:29 am Page 395
West, L.S. (1951) The Housey, its Natural History, Medical Importance and Control. Comstock
Publishing Company, New York.
Westbrook, J.K., Esquivel, J.D., Lpez, J.D. Jr., Jones, G.D., Wolf, W.W. and Raultson, J.R. (1997)
Validation of bollworm migration across south-central Texas in 19941996. 1997 Proceedings:
Beltwide Cotton Conference. National Cotton Council of America, Memphis, USA.
Westbrook, J.K., Raulston, J.R., Wolf, W.W., Pair, S.D., Eyster, R.S. and Lingren, P.D. (1995a) Field
observations and simulations of atmospheric transport of Noctuids from northeastern Mexico
and the south-central US. Southwestern Entomologist 18, 2544.
Westbrook, J.K., Raulston, J.R., Wolf, W.W., Pair, S.D., Eyster, R.S. and Lingren, P.D. (1995b)
Migration pathways of corn earworm (Lepidoptera: Noctuidae) indicated by tetroon trajectories.
Agricultural and Forest Meteorology 73, 6787.
Westbrook, J.K., Wolf, W.W., Lingren, P.D. and Raulston, J.R. (1994) Tracking tetroons to evaulate
tobacco budworm and bollworm migration. Cotton Insect Research and Control Conference
1994. Beltwide Cotton Conferences.
Wetzler, R.E. and Risch, S.J. (1984) Experimental studies of beetle diffusion in simple and complex
crop habitats. Journal of Animal Ecology 53, 119.
Whalon, M.E. and Smilowitz, Z. (1979) The interaction of temperature and biotype on development
of the green peach aphid Myzus persicae. American Potato Journal 56, 591596.
Wheatley, A.R.D., Wightman, J.A., Williams, J.H. and Wheatley, S.J. (1989) The inuence of drought
stress on the distribution of insects on four groundnut genotypes grown near Hyderabad, India.
Bulletin of Entomological Research 79, 567577.
Whitten, M.J. and McKenzie, J.A. (1982) The genetic basis for pesticide resistance. In: Lee, K.E. (ed.)
Proceedings of the 3rd Australian Conference on Grassland Invertebrate Ecology. South
Australian Government Printer, Adelaide, Australia, pp. 116.
WHO (1991) Strategies for Assessing the Safety of Foods Produced by Biotechnology. Report of a
Joint FAO/WHO Consultation, WHO/FNU/FOS/91.6. World Health Organisation, Geneva,
Switzerland.
WHO (1995) Application of the principles of substantial equivalence to the safety evaluation of foods
and food components from plants derived by modern biotechnology. Report of a WHO
Workshop, WHO/FNU/FOS/95.1. World Health Organisation, Geneva, Switzerland.
Widstrom, N.W. and Burton, R.L. (1970) Articial infestation of corn with suspensions of corn ear-
worm eggs. Journal of Economic Entomology 63, 443446.
Widstrom, N.W., Williams, W.P., Wiseman, B.R. and Davies, F.M. (1992) Recurrent selection for resis-
tance to leaf feeding fall armyworm on maize. Crop Science 32, 11711174.
Wiktelius, S. and Pettersson, J. (1985) Simulations of bird-cherry-oat aphid population dynamics: a
tool for developing strategies for breeding aphid-resistant plants. Agriculture, Ecosystems and
Environment 14, 159170.
Williams, D.G. and McDonald, G. (1982) The duration and number of immature stages of codling
moth Cydia pomonella (L.) (Tortricidae: Lepidoptera). Journal of Australian Entomological
Society 21, 14.
Wilson, L.T. (1985) Estimating the abundance and impact of arthropod natural enemies in IPM sys-
tems. In: Hoy, M.A. and Herzog, D.C. (eds) Biological Control in Agricultural IPM Systems.
Academic Press, Orlando and London, pp. 303322.
Wilson, M.F. (1995) Monitoring and adapting to the changes in pesticide use proles that occur in
response to modern pest control and environmental requirements. In: Best, G.A. and Ruthven,
A.D. (eds) Pesticides Developments, Impacts, and Controls. The Royal Society of Chemistry,
London, UK, pp. 17.
Wing, K.D. and Ramsay, J.R. (1989) Non-nervous system targets for chemicals: other hormonal agents:
ecdysone agonists. In: McFarlane, N.R. (ed.) British Crop Protection Council Monograph No. 43.
Progress and Prospects in Insect Control. British Crop Protection Council, Farnham, UK,
pp. 105116.
Winstanley, D., Jarrett, P.J. and Morgan, J.A.W. (1998) The use of transgenic biological control agents
to improve their performance in the management of pests. In: Kerry, B.R. (ed.) British Crop
Protection Council Symposium Proceedings No. 71. Biotechnology in Crop Protection: Facts and
Fallacies. British Crop Protection Council, Farnham, UK, pp. 3744.
396 References
Insect Refs 11/7/00 9:29 am Page 396
Wiseman, B.R. (1989) Technological advances for determining resistance in maize to Heliothis zea.
In: Mihm, J.A., Wiseman, B.R. and Davis, F.M. (eds) Toward Insect Resistant Maize for the Third
World. International Wheat and Maize Improvement Center (CIMMYT), El Batan, Mexico,
pp. 94100.
Wiseman, B.R., Widstrom, N.W. and McMilian, W.W. (1974) Methods of application and numbers of
eggs of the corn earworm required to infest ears of corn articially. Journal of Economic
Entomology 67, 7476.
Wittwer, S.H. and Castilla, N. (1995) Protected cultivation of horticultural crops world-wide.
HortTechnology 5, 623.
Wolf, W.W., Westbrook, J.K., Raulston, J.R., Pair, S.D. and Lingren, P.D. (1993) Radar detection of
ascent of Helicoverpa zea (Lepidoptera: Noctuidae) moths from corn in the lower Rio Grande
valley of Texas. Proceedings of the 13th International Congress of Biometeorology. Calgary,
Alberta, Canada.
Wood MacKenzie Consultants Limited (1995) Agrochemical monitor. Agricultural Biotechnology
Report No. 120. Edinburgh, UK.
Woodworth, C.M., Long, E.R. and Jugenheimer, R.W. (1952) Fifty generations of selection for protein
and oil in corn. Agronomy Journal 44, 6065.
Wool, D., van Emden, H.F. and Bunting, S.W. (1978) Electrophoretic detection of the internal para-
site, Aphidius matricariae in Myzus persicae. Annals of Applied Biology 90, 2126.
Wootten, N.W. and Sawyer, K.F. (1954) The pick-up of spray droplets by ying locusts. Bulletin of
Entomological Research 45, 177197.
Wratten, S.D. (1975) The nature of the effects of the aphids Sitobion avenae and Metopolophium
dirhodum on the growth of wheat. Annals of Applied Biology 79, 2734.
Wratten, S.D. (1987) The effectiveness of native natural enemies. In: Burn, A.J., Coaker, T.H. and
Jepson, P.C. (eds) Integrated Pest Management. Academic Press, London, pp. 89112.
Wratten, S.D. (1988) The role of eld boundaries as reservoirs of benecial insects. In: Park, J.R. (ed.)
Environmental Management in Agriculutre: European Perspectives. EEC/Pinter Publishers Ltd,
London, UK, pp. 144150.
Wratten, S.D. and Pearson, J. (1982) Predation of sugar beet aphids in New Zealand. Annals of
Applied Biology 101, 143203.
Wratten, S.D. and van Emden, H.F. (1995) Habitat management for enhanced activity of natural ene-
mies of pests. In: Glen, D.M., Greaves, M.P. and Anderson, H. M (eds) Proceedings of the 13th
Long Ashton Symposium, England: Ecology and Integrated Farming Systems. John Wiley &
Sons, London, UK, pp. 117145.
Wratten, S.D., Lee, G. and Stevens, D.J. (1979) Duration of cereal aphid populations and the effects
on wheat yield and quality. Proceedings 1979 British Crop Protection Conference Pests and
Diseases. British Crop Protection Council, Farnham, UK, pp. 18.
Wratten, S.D., Watt, A.D., Carter, N. and Entwistle, J.C. (1990) Economic consequences of pesticide
use for grain aphid control in winter wheat in 1984 in England. Crop Protection 9, 7378.
Wright, D.W., Hughes, R.D. and Worrall, J. (1960) The effect of certain predators on the numbers of
cabbage root y (Erioishia brassicae (Bouche)) and on the subsequent damage caused by the
pest. Annals of Applied Biology 48, 756763.
Wright, J.W. (1976) Introduction to Forest Genetics. Academic Press, New York.
Wright, R.J. (1984) Evaluation of crop rotation for control of Colorado potato beetles (Coleoptera:
Chrysomelidae) in commercial potato elds on Long Island. Journal of Economic Entomology
77, 12541259.
Wu, G., Wu, Z.F., Zhao, S.X. and Xu, C.J. (1993) The effects of resistance of rice varieties on carboxyl-
esterase and phosphatase activity of the white backed rice planthopper. Acta Phytophylacica
Sinica 20, 139142.
Wyatt, T.D. (1997) Methods in studying insect behaviour. In: Dent, D.R. and Walton, M.P. (eds)
Methods in Ecological and Agricultural Entomology. CAB International, Wallingford, UK,
pp. 2756.
Yang, P.J., Carey, J.R. and Dowell, R.V. (1994) Temperature inuences on the development and
demography of Bactrocera dorsalis in China. Environmental Entomology 23(4), 971974.
Yasumatsu, K. (1976) Rice stem-borers. In: Delucchi, V.L. (ed.) Studies in Biological Control.
Cambridge University Press, pp. 121137.
References 397
Insect Refs 11/7/00 9:29 am Page 397
Yencho, G.C., Getzin, L.W. and Long, G.E. (1986) Economic injury level, action threshold, and a
yield-loss model for the pea aphid, Acyrthosiphon pisum (Homoptera: Aphididae), on green
peas, Pisum sativum. Journal of Economic Entomology 79, 16811687.
Yokoyama, V.Y. and Miller, G.T. (1993) Pest-free period for walnut husk y (Diptera: Tephritidae) and
host status of stone fruits for export to New Zealand. Journal of Economic Entomology 86,
17661772.
Yokoyama, V.Y. and Miller, G.T. (1996) Response of walnut husk y (Diptera: Tephritidae) to low
temperature, irrigation and pest-free period for exported stone fruits. Journal of Economic
Entomology 89, 11861191.
Yokoyama, V.Y., Hatchett, J.H. and Miller, G.T. (1993a) Hessian y (Diptera: Cecidomyiidae) control
by hydrogen phosphide fumigation and compression of hay for export to Japan. Journal of
Economic Entomology 86, 7685.
Yokoyama, V.Y., Hatchett, J.H. and Miller, G.T. (1993b) Hessian y (Diptera: Cecidomyiidae) control
by compression of hay for export to Japan. Journal of Economic Entomology 86, 803808.
Yokoyama, V.Y., Miller, G.T. and Hartsell, P.L. (1992) Pest-free period and methyl bromide fumigation
for control of walnut husk y (Diptera: Tephritidae) in stone fruits exported to New Zealand.
Journal of Economic Entomology 85, 150156.
Yokoyama, V.Y., Hatchett, J.H., Miller, G.T. and Hartsell, P.L. (1994) Hydrogen phosphide residues
and efcacy to control hessian y (Diptera: Cecidomyiidae) in compressed hay for export to
Japan. Journal of Economic Entomology 87, 12721277.
Yu, X., Heong, K.L., Hu, C. and Barrion, A.T. (1996) Role of non-rice habitats for conserving egg para-
sitoids of rice planthoppers and leafhoppers. In: Hokyo, N. and Norton, G. (eds) Proceedings of
the International Workshop on Pest Management Strategies in Asian Monsoon Agrocecosystems.
Kyushu National Agricultural Experimental Station, Kumamoto, Japan, pp. 6377.
Zadoks, J.C. (1991) Rationale and concepts of crop loss assessment for improving pest management
and crop protection. In: Teng, P.S. (ed.) Crop Loss Assessment and Pest Management. APS Press,
St Paul, Minnesota, pp. 15.
Zadoks, J.C., Chang, T.T. and Konzak, C.F. (1974) A decimal code for the growth stages of cereals.
Weed Research 14, 415421.
Zalom, F. (1993) Reorganising to facilitate the development and use of integrated pest management.
Agriculture, Ecosystems and Environment 46, 245256.
Zalom, F.G. and Jones, A. (1994) Insect fragments in processed tomatoes. Horticultural Entomology
87, 181186.
Zalom, F.G., Casta, C. and Gabarra, R. (1996) Effects of chilling of Bemisia argentifolii (Homoptera:
Aleyrodidae) infesting cabbage. Journal of Entomological Science 31, 3951.
Zalucki, M.P., Daglish, G., Firempong, S. and Twine, P. (1986) The biology and ecology of Heliothis
armigera (Hbner) and H. punctigera Wallengren (Lepidoptera: Noctuidae) in Australia: what do
we know? Australian Journal of Zoology 34, 779814.
Zandstra, B.H. and Motooka, P.S. (1978) Benecial effects of weeds in pest management a review.
PANS 24, 333238.
Zeiss, M.R. and Pedigo, L.P. (1996) Timing of food plant availability: effect on survival and oviposi-
tion of the bean leaf beetle (Coleoptera: Chrysomelidae). Environmental Entomology 25,
295302.
Zethner, O. (1995) Practice of integrated pest management in tropical and sub-tropical Africa: an
overview of two decades (19701990). In: Mengech, A.N., Saxena, K.N. and Gopalan, H.N.B.
(eds) Integrated Pest Management in the Tropics. John Wiley & Sons, Chichester, UK, pp. 168.
Zimmerman, N.L. (1990) Coleoptera found in imported stored-food products entering southern
California and Arizona between December 1984 through December 1987. Coleopterists Bulletin
44, 235240.
398 References
Insect Refs 11/7/00 9:29 am Page 398
Abbotts formula 92
Abies concolor 168
Acarus siro 239
Acrolepiopsis assectella 33
Acrosternum hilare 79, 319
Aculus schlechtendali 302
Acyrthosiphon pisum 78, 210
Adoxophyes orana 302
Adult equivalents 50
see also Sampling, Adult equivalents
Aeneolamia varia 78
Aerial photography 67
see also Sampling; Survey, Aerial
photography
Agenda 21 274
Agonum dorsale 214
Agricultural systems 276, 310
Agroecosystem 7, 335
Analysis 315
Agrotis ipsilon 244, 245
Aldrin 4, 5, 84
Allelochemical 254, 255
Allo-infection 127129
Allomone 254, 255
Alphacypermethrin 5
Amblyomma americanum 78, 240
Amblyseius californicus 227
Amblyseius cucumeris 227
Amblyseius degenerans 227
Amphilimallon solstitalis 243
Amphorophora ideaei 136
Amrasca devastans 166
Anagrus epos 232
Anastrepha ludens 269
Animal and Plant Health Inspection Service
(APHIS) 273
Anthonomus grandis 177, 256, 269, 323
Anthonomus pomorum 302
Antibiosis see Host plant resistance, Antibiosis
Anticarsia gemmatalis 79, 319, 320, 321
Antifeedant 254, 255, 256
Antixenosis see Host plant resistance,
Antixenosis
Apanteles medicanis 4
Aphelinus abdominalis 227
Aphidius colemani 227
Aphidius ervi 227
Aphidius sonchi 194
Aphidoletes aphidimyza 227
Aphis craccivora 56, 165, 247
Aphis fabae 41, 164, 231, 255, 256
Aphis glycine 319
Aphis gossypii 247, 322, 323, 326
Aphis pomi 302
Apneumone 254, 255, 260
Aproaerema modicella 237
Archips podana 33
Archips rosanus 302
Assimilates, partitioning of 57, 58
Atherigona soccata 142, 247, 248
Attractant 254, 255
Auto-infection 127, 130
Autosterilization 260, 261
Avermectins 87
Azinphos-methyl 83
Bacillus popillae 182, 223
Bacillus sphaericus 223
Bacillus thuringiensis (Bt) 5, 172, 182, 223,
275
Bt azaiwai 182
Bt kurstaki 182
Cotton 173, 323
Gene 172, 173, 324, 329, 334
Potatoes 174
Bactrocera dorsalis 269
Bactrocera oleae 33, 260
Index
399
Insect Inx 13/7/00 2:59 pm Page 399
Baculovirus anticarsia 321
Barriers 211
Beauveria brongniartii 182
Behavioural studies 214
Bemisia argentifolii 238
Bemisia tabaci 168, 322, 325
BHC 5
Biological control 1, 2, 3, 186, 193, 233, 302,
325, 326
Agents 181, 189
Assessment of crop suitability 187
Augmentation 180, 185, 186, 187, 233,
287, 319, 320
Classical 53, 180, 185, 188, 191, 200,
215, 219, 284, 328, 334
Conservation 180, 185, 230, 233
Factors inuencing success 327, 189,
199
Inoculation 180, 185, 187, 225, 233
Introductions 180, 187, 233
Inundation 180, 220, 233
Post-establishment evaluation 219
Programmes 190
Biological diversity
Convention on 274
Exchange and exploitation 268
Biopesticides 5, 11, 89, 181, 187, 220, 221,
233, 234, 236, 260, 270, 273, 299, 319,
325, 334, 336
Application technology 222
Bacteria 220, 223
Cytoplasmic polyhedrosis virus (CPV)
182, 182
Development 222, 284
Entomopathogenic nematodes 220, 223
Fungi 183, 220, 223
Good use strategy 223
Granulosis virus (GV) 182
Mating disruption 336
Nuclear polyhedrosis virus (NPV) 182,
183, 321, 324, 329
Protozoan based 184
Sale 336
Viruses 220, 223
Biotechnology 124, 265
Biotype 136
Boom and bust cycle 129, 178
Borate 98
Boric acid 98
Bracon herbetos 324
Brevicoryne brassicae 166, 167, 176, 241
Bromophos 5
Busseola fusca 53, 246, 247
Cages 21, 63, 139, 166, 209, 210
Callosobruchus maculatus 239
Carbamates 5, 83, 84, 85, 113, 329
Carbaryl 5, 83
Ceratitis capitata 261, 269
Cerotoma trifurcata 320
Chemical insecticides see Insecticides,
Chemical
Chemo-autosterilization techniques 236, 237,
263
Chilo partellus 165, 166
Chilo suppressalis 217
Chitin synthesis inhibitor see Insecticides,
Chitin synthesis inhibitor
Chlordane 4
Chlordimeform 83
Chlorpyrifos 5, 89
Choetospila elegans 186
Choristoneura fumiferana 53
Choristoneura pinus 53
Chrysadeixis chalcites 326
Chrysodexis criosoma 171
Chrysoperla carnea 11, 227, 260
Cicuta maculata 232
Cladosporium sphaerospermum 228
Cleanus puntiventris 3
Cleistogamy 139
Cochlomyia hominivorax 5, 261
Code of Conduct for the Import and Release
of Exotic Biological Control Agents
270
Colaspis brunnea 79
Colias eurythene 4
Conference on Environment and
Development (UNCED) 274
Consumers 8, 9, 13
Contarinia sorghicola 142
Controlled atmosphere 240
Cosmetic standards 48
Cotesia glomerata 185
Cotton
Bt see Bacillus thuringiensis (Bt)
IPM 322, 324
Transgenic 323
Yields 324
Critical pathway analysis 284
Crop
Intercropping 265
Planting date 241, 245, 265
Planting density 247, 249, 265
Rotation 241, 242, 243, 264, 265, 299,
334
Tillage 241, 265
Crop light use efciency (CLUE) 58
Crop plants, pollination 138, 140, 143
Crop revenue 77
Crop rotations 289
Cropping systems 187, 188, 233, 244, 251,
253, 257, 260, 267, 330, 335, 337
400 Index
Insect Inx 13/7/00 2:59 pm Page 400
Cross-fertilization 141
Cryptoleamus montrouzieri 227
Cucurbita maxima 253
Cultivars, resistant 7, 56
Cultivation practices, economic impact 244
Cultural control 1, 2, 5, 187, 288
Concepts 265
Interference methods 235
Irrigation 237, 238
Lure and kill 260
Manipulation of the environment 235
Mulching 237
Physical barriers and mulches 241
Prophylactic 235
Tillage practices 243, 244, 299
Use in IPM 242
Cydia pomonella 33, 86, 186, 217, 257, 302
Cypermethrin 5, 85
Dacnusa sibirica 227
Dactylus glomerata 231
Damage
Crop 42
Economic 76, 321
Feeding 256
Fruit 53
Leaf 326
Maize 334
Over-compensatory response 74
Pest 91, 279, 300, 320, 340
Proles 276
Reduction 260
Risk 106
Simulated 60, 63
Susceptive response 74
Thresholds 53
Tolerant response 74
Type of 50, 60, 74
Damage function 49
Dasineura brassicae 256
Dasyneura mali 302
Database systems 299
Daucus carota 232
Day-degrees 36
DDT (dichlorodiphenyl trichloroethane) 4, 5,
83, 84, 87, 98, 113, 120, 322
Decision making 78, 32, 101
Decision support systems 299
Decision tree analysis 276, 279, 281, 307,
308
Dectes texanus 243
Delia platura 320
Delia radicum 19, 167, 241, 248
Delphastus pusillus 227
Deltamethrin 83, 85, 326
Demeton-S-methyl 96, 116
Demographic metabolic pool 61
see also Models, Demographic
metabolic pool
Dendoctronus micans 225, 229
Dendroctonus brevicornis 256
Dendroctonus frontalis 255
Density dependence 194
Density dependence
Delayed 205
Direct 205
Inverse 204, 205
Over-compensating 203
Density-dependent
Relationships 197
Sex ratio 192, 197
Diabrotica virgifera 63, 334
Diatraea grandiosella 63
Diatraea lineolata 63
Diatraea saccharalis 63
Diazinon 83, 85
Dichlorvos 85, 89, 96
Dieldrin 4, 5, 83, 84, 120
Diubenzuron 83
Difocol 95
Diglyphus isaea 227
DIMBOA 169
Dimethoate 83, 85
Dissemination efciency 135, 136
Diversity, reduction of 7
Domestrias stricapillus 231
Dosage mortality curves 90
Droplet size 93
Droplets, electrostatic charging 101
Drycosmus kuriphilus 209
Dwarf cultivars, high yielding 329
Dysaphis devecta 302
Dysaphis plantaginea 186, 302
Earias lanigerum 302
Earias vittelli 78
Earthworms, insecticide toxicity 113
Economic control 74
Economic costs 268
Economic damage see Damage, Economic
Economic forces 276
Economic injury level (EIL) 75, 77, 186
Economic return 84
Economic threshold see Threshold, Economic
Economic threshold level 322, 327
Economic threshold model see Models,
Economic threshold
Ecosystem analysis 329
Ecotoxicology 111
Edwardsiana prunicola 232
Electrophoresis 110, 206, 208, 209
Empoasca fabae 56, 151, 163, 168, 230, 246
Index 401
Insect Inx 13/7/00 2:59 pm Page 401
Empoasca kerri 105, 237
Encarsia formosa 224, 227, 228, 229, 325
Encarsia tricolor 24
Endosulfan 84, 322
Environment
Damage to 338
Physical 238, 240, 265
Environmental
Concern 13
Contamination 120
Costs 268
Hazard 13
Impact 270
Management 111
Pollution 4
Environmental Protection Agency (EPA) 271
Environmental safety 334, 337
Enzyme assays 110
Enzyme electrophoresis see Electrophoresis
Enzyme-linked immunosorbent assay (ELISA)
see Electrophoresis
Epidemiology 125
Epidinocarsis lopezi 218, 219, 220, 256
Epilachna varivestis 79, 85, 163, 167, 319,
320
Epinotia aporema 79
Epiphyas postvittana 86
Eretmocerus californicus 227
Erioishia brassicae 19
Esodemic 127, 130, 150
Estigmene acraea 321
Ethylene dibromide 89
Ethylene oxide 3
Eulophus pennicornis 87
Euonymus europaeus 210
Eupaecilia ambiguella 257
Eutinobrothrus brasiliensis 322
Exodemic 125, 127, 128
Experiments
Complete randomized block design 71
Factorial 72
Incomplete block designs 71
Paired plot comparisons 79
Paired treatment 66, 68, 69
Veterinary pest 68
Expert systems 299, 302
Extension
Services 48, 121, 276, 291, 314, 339
Workers 6, 16, 29, 314
Fannia canicularis 263
Farmer
Attitudes 279
By-pass model 328
Characteristics 279
Circumstances 281
Cooperation 90
Credit facilities 339
Education 314
Engaging 329, 335
Field schools 315, 329
Income 303, 306, 308, 312
Information dissemination 315
Information on 281
Knowledge 289
Objectives 82
Participation 314
Participatory approaches 327, 328
Prots 46
Protagonist model 328
Recommendation domain 281
Resources 335
Response to consumers 337
Risk aversion 106
Sheep 54
Training 31
Uptake 333
Farmers 9, 1113, 16, 29, 31, 41, 46, 47, 48,
68, 73, 74, 120, 123, 246, 267, 276,
279, 291303, 317, 334
Farming systems 246, 265, 281, 329
Federal Insecticide, Fungicide and
Rodenticide Act (FIFRA) 273
Fenitrothion 5, 85
Fertilizers 237, 265, 340
Festuca arundinacea 164
Festuca rubra 164
Fipronil 87
Food and Drug Administration (FDA) 271
Food products, traceability 336
Food quality standards 268
Food safety 13, 318
Forecast
Methods 33
Models 46
Regional 29, 41
Regional programme 42
Forecasting 46, 107, 236
Forests 67, 182, 187
Frankliniella occidentalis 232, 325, 326
Frankliniella schultzei 105
Fumibotys fumalis 244
Fumigant 270
Fumigation 235
Fungi see Biopesticides, Fungi
Gamma-BHC 84
Gamma-HCH 4, 84, 120
Gel electrophoresis see Molecular markers
Gene-for-gene
Concept 137
Interaction 136
402 Index
Insect Inx 13/7/00 2:59 pm Page 402
Matching 133
Relationship 124, 125, 133, 138
Vertical resistance 149
General public 10, 13, 271, 334, 340
Genetic manipulation 123, 167, 170, 171,
177, 178
Genetic markers 26
Genetically modied organisms (GMO) 273,
334
Genetics, Mendelian 4, 123, 124, 173, 328,
329, 336
Geographic information systems (GIS) 45
Gilpinia hercyniae 182
Glossina palpalis 98
GM, food products 340
Gnathotricus sulcatus 255
Goal programming 305
Gompertz function see Population estimates,
Gompertz function
Gossypium barbadense 321
Gossypium hirsutum 321
Gossypol 169, 170
Government 9, 48, 276
Green revolution 123
Growers 9, 73
Habitat modication 230, 231, 240, 328
Costs of 241
Habitat refuges 230
Haematobia irritans 89, 261
Harmonia axyridis 227
Harvest date 246
Hasonia vitripennis 198
Hazard 121, 270, 271
Hazardous materials, registration 268
Helianthus annus 57
Helicoverpa armigera 78, 110, 300, 323, 324
Heliothis subexa 262
Heliothis virescens 262, 267, 322, 323, 167,
169, 170, 172
Heliothis zea 27, 79, 86, 167, 169, 170, 172,
183, 223, 320, 321, 324,
Hemeritis canescens 197
Henderson-Tilton formula 92
Heptachlor 4
Hoplocampa testudinea 302
Horizontal resistance 125, 127129, 131133,
136, 138, 151, 159
Breeding for 149
Continuous cycles 135
Host plant
Growth stage 25
Species 25
Host plant attractants see Attractant
Host plant resistance 2, 5, 123, 235, 265, 266,
283, 284, 325, 329
Anatomical features of plants 167
Antibiosis 160, 161, 162, 169, 166, 289
Antixenosis 160, 161, 162, 163, 169
Biochemical basis of 169, 170
Breakdown 176
Horizontal 125, 127129, 131133, 136,
138, 151, 159, 177, 288
Incomplete 177
Mechanisms 164, 177, 160, 168
Morphological basis of 166
Partial 136
Plant tolerance 160, 161, 162
Polygenetically inherited 125, 150
Pyramiding genes 174, 175
Quantitative vertical resistance 136, 137
Secondary metabolites 169
Vertical 124, 125, 127131, 134, 135,
137, 149151, 177, 178, 289, 327, 328
Hybridization, in vitro methods 148
Hydrogen cyanide 108
Hydrogen phosphide 89
Hydrotaea irritans 68
Hypera postica 150, 217
Hypoaspis miles 227
Hypoderma lineatum 237, 261
Iaproaerema modicella 105
Imidacloprid 87, 89
Imidates 84, 87
Immunoassays 110
Immunological response 237
Implementation 294, 312, 313
Inbred pure lines 141
Inbreeders 138, 141, 145, 149
Inbreeding depression 147
Infestation, articial 62, 63
Information delivery systems 314
Inputs off-farm 11, 12
Insect
Behaviour 164
Behaviour modifying chemicals 169, 265
Biology 11
Circadian rhythms 23
Density 21
Development 25, 35, 166
Developmental stage 50
Diapause 36
Diet 25
Dispersal 20
Exotic species 7
Exuviae 51
Fecundity 24, 25
Fertility 24
Frass 51
Geographical distribution 28
Growth 25
Index 403
Insect Inx 13/7/00 2:59 pm Page 403
Insect continued
Migration 2629
Mortality 20, 25, 26, 191, 192
Natality 24
Reproduction 20
Survival 25
Threshold temperatures 35
Traps 14, 15
Vectors 51
Insect growth regulators (IGR) 8486, 89,
260, 262, 289
Benzoylphenylurea 86, 87
Cryomazine 86
Diubenzuron 86
Fenoxycarb 86
Hexaumuron 86
Novaluron 87
Pyriproxifen 86
Triumuron 86
Insect/host interactions, ecology 236, 265
Insectpathogen interactions 222
Insect pest management (IPM) see IPM
Insecticide
Acceptable daily intake (ADI) 272
Adulteration 104
Anti-juvenile hormone agents 87
Application 29, 33, 34, 46, 92, 99, 214,
257, 303
Calendar based 82, 107
Decision making 101
Dose 118
Economic 330
Equipment 101
Hydraulic nozzles 100
Operator contamination 104
Optimization 115, 116
Prophylactic 82, 107
Rate 100, 121
Timing 64, 115, 320
Ultra low volume (ULV) 100
Availability 338
Biodegradation 114
Chemical 3, 4, 75, 116, 222, 233, 235,
260, 287, 288, 299, 318, 319, 322, 323,
325
Chitin synthesis inhibitor 85, 260, 262
Contact 96
Contamination of water 113, 114
Cost 178
Dermal absorption 272
Disposal 104
Drift 48
Droplets 95
Ecologically selective 214
Economic viability 106
Efcacy 90
Efciency 121
Field performance 99
Formulation 88
Hazard 104, 121
Ingestion 272
Inhalation 272
Inoculation 272
Juvenile hormone 85, 86
Labelling 104
Livestock pests 120
Maximum residue level (MRL) 272, 273
Misuse 10, 122
National estimated daily intake (NEDI)
271
Packaging 104
Persistence 114, 118
Regulation 270
Residues 12, 118, 224, 337 336
Maximum recommended levels 114
Resistance 8, 12, 107109, 118, 120, 224,
313, 323, 334
Cross resistance 108, 120
DNA diagnostics 336
Management 110, 267
Safety 103, 104, 121, 271
Selectivity 117, 118
Sheep dip 37
Sprayer, calibration 101
Stomach poison 98
Subsidies 6
Supervised trial median residue (STMR)
273
Targeting 99, 121
Theoretical maximum daily intake
(TMDI) 273
Transfer 94, 98
Transparency 94
Treatment 258
Umbrella 129, 138
Use 30, 42, 107, 122, 138, 246, 265, 277,
302
Environmental costs 121
Optimization 115
Prot margins 177
Rational 121, 234
Value to farmers 81
Integrated crop management (ICM) 335
Integrated farming systems (IFS) 335
Intercropping 250, 252, 253, 264
International Code of Conduct on the
Distribution and Use of Pesticides
271
IPM 236, 265, 267, 274, 318, 335, 336
Adoption 314, 339
Banner 10
Concept 299
Ecological principles 265
Future prospects 339
404 Index
Insect Inx 13/7/00 2:59 pm Page 404
Guidelines 318
Impact of government policy 338
Implementation 314
Interdisciplinary system 292
Legislation 268
Methods 5
Organizational structures 281
Philosophy 11, 233, 337
Principles 10, 12, 84
Programmes 80, 256, 291, 292, 315, 323
Research programmes 282, 284, 289
Strategies 238
System 279, 283, 327, 329
Training 6
Umbrella 11
Understanding 12
Ips paraconfusus 168
Ips typographus 256
K-strategist 286, 287, 288
Kairomones 169, 254, 255, 256, 260
Keiferia lycopersicella 33, 78
Key factor analysis 202, 203
Kraussaria angulifera 243
Lacomobia oleracea 87
Lambda-cyhalothrin 85
Leaf area duration (LAD) 58, 59
Leaf area index 56, 58
Leaf area ratio 55
Lectin, snowdrop 172
Legislation 267, 268, 271, 274
Leptinotarsa decemlineata 242, 268, 269
Leptomastidea abnormis 227
Leptomastix dactylopii 227
Leptomastix epona 227
Life table
Age specic 201, 202
Analysis 166, 201, 203, 204
Time specic 201
Locustana pardalina 221
Lolium multiorum 164
Lolium perenne 164
Longiunguis sacchari 247
Lucilia sericata 37, 54, 261
Lygocoris pabulinus 302
Lymantria dispar 257
Macrolophus caliginosus 227
Macrosiphum euphorbiae 51, 168, 325
Major resistance genes 125
Malacosoma disstria 67
Malathion 85
Mammalian toxicity 4, 82
Manduca sexta 171
Manual defoliation 65
Markrecapture methods 26, 242
Maruca testualis 319
Mass trapping 10
Matching infection, probability of 134
Mating disruption 11, 256, 257, 324
Matrix
Damage 277, 278
Interaction 276, 277, 279
Matsumuraeses phaseoli 319
Mayetiola destructor 2, 136
Megalurothrips sjostedi 166
Melontha melontha 182, 243
Mendelian,
Genetics see Genetics, Mendelian
Inheritance 141
Laws 109
Mesoleieus tenthredinis 196
Metarhizium anisopliae 3, 183, 221
Metarhizium avoviride 183, 221
Methrocarp 5
Methyl bromide 89
Metopolophium dirhodum 51, 118, 237,
256
Metopolophium festucae cerealium 164
Mites, predatory 184
Models
Analytical 181, 327, 329
Computer 299
Conceptual 60, 296, 331, 332
Crop growth 58
Crop physiological 80
Decision 303
Demographic metabolic pool 61
Deterministic 189, 190, 327
Dioristic 331
Economic threshold 48, 289
Empirical growth 58
Functional response 61
Investment 48
Mechanistic 60
Metapopulation dynamics 199
Multiple regression 38
Multiple species 200
Multitrophic 61, 62
Nachman 18
Parasitoidprey interaction 190, 199
Plant growth 58, 61
Population dynamics 61
Predator 190
Predatorprey interaction 189, 199, 181,
183, 193
Predictive 38
Probit 18
Quantitative 316
Regression analysis 38, 46, 58, 65
Index 405
Insect Inx 13/7/00 2:59 pm Page 405
Models continued
Simulation 37, 61, 80, 181, 277, 279,
299, 300
Statistical 33
Stochastic 189
Theoretical 181
Two species interactions 189
Molecular markers 170
Monitoring
Devices 11, 15, 80, 299
Objectives 28
Procedure 44
Programme 14
Quantitative 236
Sequential 29
Strategies 28
Systems 46, 115
Techniques 30, 31, 36, 42
Monitoring and forecasting 20, 289, 299
Programmes 16
Systems 15
Monoclonal antibodies, generation of 208
Monocrotophos 83
Mononychellus tanajoa 61, 155, 156
Mortality see Insect, Mortality
Musca domestica 198, 263, 264
Myzus persicae 51, 167, 168, 177, 211, 325
Natural enemies 161, 167, 180, 186, 187, 188,
191, 203, 216, 217, 231, 233, 265, 266,
287, 289, 322
Augmentative control 215, 226
Conservation 230
Detoxication pathways 117
Entomopathogens 181
Exotic 215
Inoculative release 181
Insecticidal check method 214
Mass rearing 225
Quarantine 218
Ranking 215
Vertebrates 184
Natural enemy
Conservation 324,328
Hypothesis 251, 252
Population decimation 327
Nematodes
Entomopathogenic 184, 223
Heterorhabditidae 183
Mermithidae 183
Steinernematidae 183
Nematospora coryli 319
Neodiprion sertifer 53
Neonicotinoids 87
Nephotettix virescens 5, 143
Nezara viridula 79, 319, 320
Nicotiana tabacum 171, 228
Nicotine 3, 87
Nilaparvata lugens 5, 136, 143, 280
Nitroquanidine 87
Non-target organisms 82, 112, 115
Nosema locustae 182
Nosema pyrausta 182
NPV 321, 324, 329
see also Biopesticides, Nuclear polyhe-
drosis virus (NPV)
Odealeus senegalensis 243
Oecophylla smaragdina 2
Omiodes indicata 321
Oncopeltus fasciatus 23
Open-pollinated populations 143145, 148,
149
Operophtera brumata 302
Organisation of Economic Co-operation and
Development (OECD) 271, 273
Organizational structures 292, 293
Organochlorines 5, 81, 83, 84, 104, 111115,
120, 329, 334
Organophosphates 83, 84, 5, 113, 326, 329,
334
Orius insidiosus 227
Orius laevigatus 227
Orius majusculus 227, 232
Orseolia oryzae 5
Ostrinia nubialis 169, 182
Otiorrhynchus sulcatus 171, 325
Oulema melanopus 167
Outbreeders 138, 139, 141, 143, 144
Ovine myiasis 54
Panonychus ulmi 186, 302
Parasitic ability 125, 132
Parasitism 2, 254
Percentage 201, 225
Parasitoid
Feeding damage 193
Food sources 231
Guilds 217
Host susceptibility 196
Hostparasitoid interactions 193, 195,
198
Mortality 168
Multiple parasitism 185, 192
Mutual interference 195, 198
Population dynamics 62, 204
Pro-ovigenic 192
Reproductive potential 252
Searching behaviour 198
Sigmoid functional response 198
Superparasitism 185, 192
406 Index
Insect Inx 13/7/00 2:59 pm Page 406
Type III functional response 195
Variable sex-ratios 196
Parasitoids 11, 26, 111, 181, 184, 202, 206,
208, 252, 256, 288, 321, 327
Ectoparasites 185
Endoparasites 185
Hyperparasitism 192, 197, 200, 201, 204,
218
Sale of 336
Synovigenic 192, 197
Parathion 83, 322
Paris Green 3
Pastinaca sativa 232
Pathogenicity, genetics of 124
Pathosystems 330, 334
Crop 128, 129
Horizontal 127, 132
Vertical 127
Wild 127, 128
Pectinophora gossypiella 38, 29, 78, 257,
267, 258, 259, 322, 323
Pedigree breeding 141
Penphigus bursarius 36
Periplaneta americana 98
Permethrin 83, 85
Pest attack, intensity 49
Pest control business 12
Pest management
History 1
Integrated multidisciplinary approach
292
Outputs of research 299
Philosophy 12
Policy 13
Programme 317
Progress 318
Strategy 307, 312, 313
Push-pull 236
Stimulodeterrent diversionary 236
Sustainable 8
Systems 328
Pest outbreaks 7, 20, 29, 180, 237
Cyclical 8
Forecasts 14
Secondary 8, 276, 318, 327
Pest population
Development 238, 239
Dynamics 1, 29, 45, 81, 115, 245
Pesticide see Insecticide
Pesticide treadmill 4
Pesticides Safety Directorate (PSD) 271
Pestrevenue curve 75
Pestyield curve 75
Pestyield relationship 75
Phacelia tamacetifolia 231
Phaedon cochleariae 51, 51, 63, 169
Phaseolus vulgaris 64, 171, 253
Phenacoccus manihoti 61, 215, 217, 219,
220, 256
Phenothiazine 3
Phenylpyrrazole 84, 87
Pheromone monitoring system 10, 284
Pheromones 5, 10, 254, 260, 325, 329
Aggregation 254, 255
Alarm 254, 255
Sex 89, 236, 254, 255, 256, 257
Phorate 96
Phorodon humuli 210
Phosphine 240
Photosynthetically active radiation (PAR) 58
Phthorimaea operculella 269
Physiological time 35
Phytophthora infestans 59, 125127
Phytoseilius persimilis 224, 227, 325, 326
Pieris rapae 78, 163, 166, 210
Pinus ponderosa 168
Piperonyl butoxide 110
Pirimicarb 106
Planning Evaluation and Review Technique
(PERT) 284
Plant breeding
Backcross breeding 148, 149
Clones 147
Horizontal resistance 149, 151, 159
Hybrid 147
Inbred lines 148
Mass selection 144, 149, 151, 152, 153
Populations 124, 138
Programmes 49, 170, 173, 176
Reciprocal recurrent selection 145, 146
Resistant phenotypes 151
Schemes
Bulk 142, 143
Pedigree 142, 143
Single-seed descent 142
Single seed descent 143
Techniques
Durable resistance 137, 149, 176, 177
Line breeding 144
Progeny testing 144, 145
Resistance breakdown 178
Resistance genes 176
Trials
Design 153
Fouden Squares 154
Gardners grid system 157
Incomplete block designs 153, 154
Incomplete Latin Square 154
Latin Square 154
Nearest neighbour techniques 157
Plant growth, resource partitioning 238
Planting date see Crop, Planting date
Planting density see Crop, Planting density
Plathypena scabra 50, 79
Index 407
Insect Inx 13/7/00 2:59 pm Page 407
Platyptila carduidactyla 257
Polymerase chain reaction (PCR) 170, 336
Plutella xylostella 51, 52, 63, 78, 214, 334
Polybutenes 326
Polygenic inheritance 109
Popillia japonica 269
Population estimates 20
Absolute 20, 21
Gompertz function 25
Relative 21
Stagefrequency data 26
Survivorship curves 24, 25
Weibull function 25
Populus tremuloides 67
Predator
Food sources 231
Guilds 217
Gut analysis 209
Prey identication 208
Predatorprey
Theory 199
Interactions see Models, Predatorprey
interactions
Predators 26, 111, 181, 184, 198, 202, 206,
213, 229, 230, 252, 288, 327, 328
Aphid specic 211, 212
Cocinellid 256
Generalist 232
Sale of 336
Pristiphora erichsonii 184
Pristiphora erischsonii 196
Probit analysis 90
Proceras indicus 169
Product inputs 11
Product life cycle 12
Proles
Historical 276
Seasonal 277, 278
Programme design 281
Programming
Dynamic 299, 310, 311
Goal 299
Linear 299, 303
Prostephanus truncatus 52
Protease inhibitors 171
Pseudoplusia includens 79
Psila rosae 33, 203
Psylla mali 186
Psylla pyricola 186
Public opinion 121
Puccinia graminis 131
Puccinia polyspora 133
Puccinia recondita 131
Puccinia striiformis 131
Pyrethroids 8385, 87, 110, 113, 120, 329, 334
Pyrethrum 3
Pyrethrum cinearaefolium 85
Quadraspidiotus perniciosus 269
Quarantine 217, 275, 320
Entry status 269
Measures 268
Named pests 268
Post-entry procedures 269
Procedures 289
Regulation 267, 268
Third country 270
rK continuum 287
r-strategist 286, 287, 288
Radio-isotope techniques 206, 208
Randomized complete block design 245,
246
Range lands 187
Ranunculus acris 232
Rapid ampliccation of polymorphic DNA
(RAPD) 336
Regression analysis see Models, Regression
analysis
Relational diagrams 300
Relative growth rate 56
Repellents 254, 255, 256
Research
Coordination 294
Integration 295
Interdisciplinary 292
Multidisciplinary 11
Pathways 32, 284, 297
Status analysis 283
Resource concentration hypothesis 251,
253
Restricted fragment length polymorphism
(RFLP) 170
Rhagoletis cerasi 269
Rhagoletis pomonella 269
Rhizophagus grandis 229
Rhopalosiphum insertum 186, 302
Rhopalosiphum padi 256
Rhyzopotha dominica 186
Risk 271
Assessment 111, 112, 121
Management
Regulatory 112
Quantiable attributes 338
Quarantine 268
Reduction 3
Rodolia cardinalis 2
Ryzopertha dominica 167
Saccharopolyspora sinosa 87
Sample
Independence and interaction 19
Size 17, 18
408 Index
Insect Inx 13/7/00 2:59 pm Page 408
Sampling 19, 46
Adult equivalents 50
Efciency 21
Programme 15, 17
Quadrats 21
Random 15
Stratied random 15, 16
Systematic 15, 16
Taylors Power Law 18
Techniques 14, 28
Theory 15
Scamus buoliariae 232
Schistocerca gregaria 221
Schizaphis graminum 142
Scirpophaga incertulas 5
Seed production 147
Self-fertilization 141143
Self-pollination 138, 139, 141
Semiochemicals 235, 236, 237, 254, 260,
336
Semiothisa abydata 321
Serological techniques 205, 206, 207, 208
Sex pheromones see Pheromones, Sex
Sex ratio see Density dependent, Sex ratio
Silent Spring 13, 121
Sitobion avenae 42, 43, 45, 51, 53, 56, 118,
167, 211, 237, 256
Sitophilus granarius 239, 240
Sitophilus oryzae 240
Sitophilus sasakii 167
Smicronyx fulvus 243
Sogatella furcifera 56
Soil 250, 326
Solanum berthaultii 168
Solanum polyadenium 168
Solanum tarijense 168
Sorex cinereus cinereus 184
Soybean 319, 321
Spinosyn 87
Spodoptera exempta 27
Spodoptera exigua 183, 321, 322
Spodoptera frugiperda 27, 63, 86, 145
Spodoptera littoralis 22, 98, 177, 258
Stakeholders 9, 13
Steinernema carpocapsae 183
Steinernema feltiae 183
Sterile insect technique (SIT) 5, 236, 237,
261, 262, 328, 239, 334
Stored product systems 238
Stored products 68, 182, 186
Strategy, early planting 245
Streptomyces avermytilis 87
Subsistence agriculture 3
Subsistence farmers 133
Survey 28, 31, 49
Aerial photography 67
Techniques 29
Survivorship curves
see also Population estimates,
Survivorship curves 24, 25
Synanthedon pictipes 257
Synomone 254, 255, 256
Systems analysis 332
Tachyporus hypnorum 231
Tax incentives 9
Taylors Power Law
see also Sampling, Taylors Power Law 18
Tebufenozide 86
Teuthrin 85, 89
Tetranychus urticae 57, 93, 214, 224, 238,
322, 324, 325, 326
Therioaphis maculata 4, 151
Thianicotinyl 87
Thiocyanates 3
Threshold
Action 33, 77, 78, 82, 84
Catch 39
Composite 78
Damage 29, 39, 53, 74, 75, 82
Development 36
Economic 5, 6, 29, 37, 49, 75, 77, 78, 80,
82, 115 224, 235
Thrips tabaci 33, 325, 326
Tiazophos 5
Tillage see Cultural control, Tillage practices
Toxaphene 322
Toxicity 271
Fish 85, 87
Mammalian 4, 82, 85, 88
Non-target invertebrates 85
Toxicological assessments 114
Tragedy of the Commons 120
Trajectory analysis 27
Transgenic crops 10, 48, 123, 124, 171, 329,
336, 337, 338
Bt 172, 334, 336
Cotton 323
Public perception of 337
Trap crops 320
Trapping, mass 256, 260
Traps 41, 46
Catch 17, 23, 45, 46
Coloured 38
Insect 21
Light 22, 23, 29, 30, 80
Malaise 22
Monitoring devices 32, 33
Pheromone 22, 23, 31, 33, 38, 258
Pitfall 22
Sticky 23
Suction 22, 29, 30, 80
Trial design 70
Index 409
Insect Inx 13/7/00 2:59 pm Page 409
Trialeurodes vaporariorum 224, 227, 325,
326
Field, methodology 91
Insecticide spray drift 73
Small plot 90
Yield loss 66
Triazine derivatives 85
Triazine insect larvicide 86
Tribolium castaneum 239
Trichlorfon 5
Trichogramma brassicae 227
Trichogramma cryptophebiae 226
Trichogramma evanescens 227
Trichogramma pinoi 324
Trichoplusia ni 19, 35, 64, 78, 172, 321,
322
Triumuron 263
Trypondendron lineatum 254
Tryporyza incertulas 217
Typhlodromus pyri 302
Tyroglyphus phylloxerae 2
Unit leaf rate 55
United Nations Food and Agriculture
Organization (FAO) 271, 273
Urbanus proteus 64
Vertical genotypes 128
Vertical resistance see Host plant resistance,
Vertical
Viruses see Biopesticides, Viruses
Weibull function 25
see also Population estimates, Weibull
function
World Health Organisation (WHO) 271, 273
Yield 1, 2, 61, 129, 153, 176, 238, 241, 246, 247
Actual 48
Compensation for damage 327
Components 157, 158
Cotton 259
Crop 12, 57, 91
Delayed planting time 245
Estimates 158
Gain 215
Highest attainable 48
Improvement 5, 178
Increase 74, 237
Maximizing 242
Measurement 77
Measures 52
Oil 244
Plant 138
Pole bean 65
Qualitative 48
Quantitative 48
Reduction 58, 152
Regression 62
Satisfactory 247
Yield function 49
Yield loss 3, 48, 49, 50, 52, 53, 58, 152, 185,
231, 233, 316, 319, 321, 330, 340
Assessment 48, 49, 62, 63, 69, 79
Data 80
Economics 73
Estimation 68
Farmers perception of 53
Loss of grain weight 68
Measures 52
Reduction 91
Zea mays 253
Zeuzera pyrina 53
Zieraphera diniaria 301
410 Index
Insect Inx 13/7/00 2:59 pm Page 410