Professional Documents
Culture Documents
Design For Easy Ship Repair and Survey
Design For Easy Ship Repair and Survey
The recent shipbuilding boom has produced unexpected development in almost all shipping and marine technology sector. These include ship operation, new shipbuilding, ship repair and surveying etc . In shipping industry acute shortage effective manpower is visible in all trade sectors. The order book of almost all the medium and large building yards is full. The shipbuilding yards and ship design offices all over the world are facing it difficult to manage their projects due to unavailability of qualified Naval Architects and Shipbuilding Engineers. The situation in Ship Repair firms is also not very different. The technical institutions which offer Naval Architecture and Shipbuilding courses are also affected very badly as the faculty positions are lying vacant ever since the boom started. In this context, it will be interesting to note the effect of the shipbuilding boom in one of the critical fields in the entire marine technology sector, i.e. Ship Classification and Survey. Ship classification societies are also affected adversely in the manpower crises. First time in the history of ship classification and survey, the classification societies are struggling to keep the experienced hull surveyors with them. Hull surveyors with more than 5 years of solid service are even moving out of classification jobs and they are accepting positions elsewhere in ship design consultancy firms and Shipbuilding yards. The present shipbuilding boom is only partly responsible for this situation. A close look at the profile of ship surveyors responsibilities and activities will reveal more information regarding the present exodus of qualified and experienced Naval Architects. The tough environments in which surveyors there routine survey and inspection works, have an important role to play in this extraordinary phenomenon. In the recent past, there have been significant developments in the shipyard facilities and shipbuilding policies, such as general yard infrastructure, shipbuilding techniques and methods, safety practices and environment policies which have contributed considerably to the quality of working conditions of the workforce. Though some of them were implemented as per the guidelines issued by ship classification
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
societies, they themselves are yet to get benefit out the same. The surveyors are discharging one of the most critical duties for ensuring smooth international shipping activities in a relatively rough and tough working conditions .Major area of concerns regarding this include , 1. 2. 3. 4. Access to surveying. Protection design and safety practices. Frequency of surveys. Maintenance policies
All these topics can be included in an engineering philosophy frame work; Design for Ship Repair and Survey. The philosophy should be developed into an engineering practice in ship design and naval architecture through which the quality of working condition of surveyor, repair engineers and workers can be improved substantially. Following discussion topics elaborate the need of such a frame work.
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
This problem can be taken care of by providing stiffeners or longitudinal which contain ladders or hand rails by which surveyors can walk through and inspect the adjoining areas.
1.3 Height of double bottom is critical factor for surveying. Low height inhibits human entrance. Apart from the access problem inadequacy of light and oxygen are also to be taken into account. Man movement and survey is difficult in double bottom and the process of survey is time taking. In order to tackle this dual effect, an alternative surveying practice is to be designed and developed. An effective solution for this can be a high quality camera fitted robotic machine which will move over all the places of inspection. For free and smooth movement of robotic camera system in the region of inspection, we need to design the double bottom accordingly. The design of double bottom for ship survey becomes particularly important. In this regard we need to carve and create a path for the robotic camera system through the stiffeners or in floors in such a way that all area of inspection is within the reach of the robotic camera. To do this sometimes we may need to cut an access hole through the floors which may affect the strength of floors. The floors which have been modified should be additionally strengthened without affecting the free movement of the robotic camera unit. This technique of inspection can be extended to other areas of ships also.
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
The classification society rules for the construction and inspection of hatch covers should be more focused towards ensuring safety to the ship and cargo from such threats. The ship operation manuals prepared by the ship builder should specifically mention the in-house maintenance practice regarding watertight integrity of hatch covers. Efforts by owners, masters and crew in effective maintenance are also required. To check the integrity of hatch covers during voyage, the ships crew must keep a vigil eye on their condition by means of visual inspection and techniques like light infiltration test and ultrasonic tests on board. In order to ensure proper inspection , all such ships should have especially trained personnel who can inspect the hatch covers properly in all respects. They should also send feedback to the manufacturers and classification societies for improvement in original design specifications. Hatch covers should be designed with a view refer to ship motions and acceleration induced stress as of the equipment, ease of operation and convenience of maintenance. Steel protection with high quality coatings and corrosion resistant materials should be used. A strict maintenance programme should be run by the crew to avoid corrosion, lubricate the moving parts and hatch covers kept in proper conditions, keeping damage holes clear.
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
Peripheral and cross joint gaskets should be strictly vigilated. In case of hydraulic cleating or securing, it should be ensured that the covers remain closed and weathertight in case of failure of hydraulic mechanism. During voyage in emergency, tarpaulins or adhesive tapes may be used for closing the openings. This can especially be done in cases of large cracks, hatch cover openings, and badly joined parts. Containers and cargoes should not be stowed on hatch covers unless they have been designed for such carriage. The securing devices must be checked and tightened by the crew, especially in rough sea conditions. Proper stowage and security of deck cargo and derricks must be ensured, To avoid dislodging and subsequent damage to hatch covers. The manufacturers instructions regarding safe operation, inspection, maintenance and repair must be followed in all respects.
Onboard repair welding can be done to close the gaps, cracks and other structure failure.
Damage to fertilizer
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
The flooding of spaces below the main deck due to hatch cover or securing device failure, or failure of other deck fittings, is linked to green water loads. Failures have been attributed both to direct impact loads of an impinging wave, and to impact by loose gear, deck equipment or fittings that have broken away from their foundations and then been carried by green water. One of solution to this operation problem is the bow height and Provide increased reserve buoyancy above the main deck and added bow protection against green sea loads, such as increased bulwark height and flared upper bow part, are currently being analyzed to reduce the occurrence and effects of green water on deck. Based on the formal investigation report on the loss of the ship Derbyshire, new model tests and extreme value predictions for severe wave conditions have been carried out and are being used to re-assess strength requirements for hatch covers and foredeck fittings.
2.3 Pipe penetration arrangement. Sleeve and doublers arrangements are two important penetration arrangements through bulkhead. Such arrangements have various advantages depending upon location purpose of use and piping system for which it is used, but whereas repair is concerned sleeve arrangement has many advantages over doublers arrangement which are listed below
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
Doublers arrangement
Sleeve arrangement
Sleeve arrangement require less weld length, less heat input eventually less man-hour in comparison of doublers arrangement installation. Doublers arrangements need frequent replacement because more prone toward corrosion While repairing, cut in bulkhead is small for sleeve arrangement.
Standard shipyard practice is to mark with welding rod on spool pieces for classification. It is done to retain its identity forever even after galvanizing. It is time taking and needs extra consumables and man-hour. Unwanted heat input in affected area make it more prone to corrosion too. It can avoided by using an aluminum foil attached with spool pieces and other marking equipments on Flange can also serve the purpose.
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
3. Frequency of Survey
A part of ships surface is in direct contact with sea water and the rest is in touch with atmosphere, but all these surfaces are still surrounded by the sea. So, the paints used for ships must resist salt water activity and be able to oppose atmospheric corrosion. The paints in general use are alkyd resin based paints, bitumen based and glysorite based. they have protection life about 5 to 6 months after that ship has to repainted , Naval Material Research Laboratory Mumbai has developed a new means of protective coating for naval vessel and platform , some of recently developed paint are self healing paint , smarter paint and fire retardant paint. Some of areas of ships are surveyed after enough gap of time in which there may be inevitable damage to the paint and the surface may be in danger. in such area , self healing paint play an important role in protecting the surface .if some damage is done to the paint layer like crack etc , this paint itself cure the crack . If these new painting scheme can implemented, the frequency of surveying can be decreased or gap can be increased.
4. Maintance Polices
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
For easy running of ship need to timely monitor the hull condition. Apart from severe corrosion the
outer hull experience due to presence of salt water in surrounding, the presence abrasive cargo in hold also cause severe corrosion of inner parts of hull. In order to monitor the condition of
structural components, condition assessments are conducted within the scope of class surveys, statutory surveys and ship owner's surveys in regular time intervals. Information to be recorded consists of thickness measurements and other findings affecting structural strength like cracks, condition of coating and sacrificial anode condition. Today, hull condition monitoring is tedious and time taking process (Thickness measurement &comparison is done by manually). The major disadvantages of the current procedure can be summarized as a) Process involved is data collection, reporting and analysis is done by manually. Hence its time consuming b) Difficult to access the problems area c) Automatic transfer of thickness measurement result to direct class calculation system is not available
The ships hull can be monitored by a special mechanism. it involve a robotic machine clinging to the hull structure for thickness measurement. These measured values can be stored in a file through software which can be easily imported to the 3-D model of the ships. There it is checked analytically and graphically by a computer and the danger areas are clearly shown through the automatic alarms.
In this context pioneer work proposed by GL is worth referring to. The Germanischer Lloyds has developed software, PEGASUS to support the thickness measurement process for achieving fast and easy input and visualization of the thickness measurement data .The software first accept the data input and reports it .then analyses the data prepares the final report.
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)
Thickness measurement
Conclusion This paper has tried to highlight the need of implementing new design feature, focusing the requirements of survey and inspection of ship hull. Some of the proposed ideas in this paper have to be looked further into for its practical application possibilities within the scope of present know-how and technology available in ship design and ship building. A feedback from the surveyor community is a must for detail research in this subject, With the help of the feedback data on hull survey of ships more suggestion can be incorporated in the frame work of Design for Ship Survey and Repair.
References
1. IACS URZ, Requirements concerning Survey and Classification, 2003 2. Efficient Data Management for Hull Condition Assessment David Jaramillo Germanischer Lloyd, Germany, Christian Cabos* Germanischer Lloyd, Germany, Philippe Renard Bureau Veritas, France 3. IACS Rec. 1997/ Rev 2 1997 4. IMO Resolution MEPC.94(46), 2001, Condition Assessment Scheme
Design for ship repair and survey [2008] (shiptechnique journal vol: XXV ,2009)