Entreprenuers Handbook
Entreprenuers Handbook
Available
from:
Technology (SKAT)
Reproduction of this microfiche document in any form is subject to the same restrictions as those of the original document.
-;) ..
ENTREPRENEUR'S HANDBZIOX
TECHNQNET ASIA
COPJTEHTS
THE PROJECT TEAM AND ii ti 7 PROJECT 36 SELECTION, 73 CONTRIBUTORS, i
FrlREWORD,
INTRODUCTION,
ENTREPRENEURIAL SELF-ASSESSMENT, eng*&tQ 2, Bajaho OPPORTUNITY 1DENTIFICAT:ON AmulL~O F. Ltao PLANNlNG AND ORGANIZING Ignatio u. ALviza MANAGING AND
A BUSINESS, 68
Smenidad
F. Lavadolr
THE
ENTERPRISE, 93
Edumdo Q. Cati..eea
AND
OPERATIONS 757
MANAGEMENT,
775
FINANCIAL MANAGEMENT, G&mix ?. Can&a HOW TO ANALYZE Tmm 2. Ranuia EXPANDING YOUR
BUSINF?,
206 245
.4&xmdti
APPEND ICES
I. 2 3
262 270
PROJECT
FINANCIAL 278
BIBLIOGK4PHY,
-i-
The ENTREPRENEUR'S tiANVBOOKwas prepared and written by the University of the Philippines Institute for Small-Scale Industries (UP ISSI). The UP ISSI project team wa s composed of Seienidad F. Lavador, project director; Alber+o P. Capati, Angelita S. Bajaro and Victor C. Abainza, project assistants; and Myrna R. Co, project editor. Eduardo M. Taylor and Ignacito U. Alvizo served as consultants. Administrative suppo:t was provided by Angelina N. Eduardo and Evangeline H. Punzalan and artwork by Priscila P. de Guzman. A panel of contributors, representing several TECHNONET ASIA Participating Organizations, met on December 8-13, 1980 at the UP ISSI to review the first draft of the manual. They were Sirajuddin Ahmad of the Bangladesh Small and Cottage Industries Corporation (BSCTC): Machdi Ichsani and J.M.P. Ohello of the Departemen Perindustrian CUP), Indonesia; A.M.A. Abeysinghe of the Industrial Development Board (IDE), Sri Lanka; Zahudi bi:,riaji.9bdul 241 of the Majlis Amanah Ra'ayat (MARA), Malaysia; i: and Prani Obhasanond of the Department of Industrial Promotion (QIP), Thailand; Felipe ?apa, a Filipino entrepreneur, Paterno V. Viloi.ia,small enterprise development specialist, Zenaida C. Madroiio, UP ISSIs management specialist, and Lucita Lazo of the University of the Philippines Department of Psychology sat in as resource persons. Earlier, in July 1979, representatives from these Participat<ng Organizations met at the same venue to formulate the design and determine the methodology and content of the manual. They were Sirajuddin Ahmad of BSCIC, Omar bin Haji Bahrul of MAKA, Vim Roonggrout and Prani Obhasanond of DIP, Hamsah Ynusir and Nadirsjah Ara of DP, A.M.A. Abeysinghe of IDB and senior staff of the UP ISSI.
FOREWORD
For quite some time, we have been bothered that the entrepreneurship development programs being introduced in developing countries have been mostly patterned sfter models applied in industrialized countries. For sure, we can learn much from the experiences and achievements of the more advanced ecoromie5. Whenever a+licable, they have been referred to and used. But the economic, social and cultural conditions are totally different that make adaptation much more difficult than "inventing" our own models. Hence, we undertook the HANDMAN Project - an Entrepreneur's Handbook and a Trainer's Manual on Entrepreneurship Development. This is followed up by an on-going research project on the "Validation of Selection Schemeland Achievement Motivation Training for Entrepreneurial Development in Asia". The findings and conclusions of this research would eventually contribute "coa revised version of these publications. These publications are by no means complete. They have been designed so that organizations responsible for entrepreneurship development will be able to supplement the basic material provided with their own in-country "notes'. In some countries, it would be necessary to translate these publications in the local language. We hope we have completed a beginning which would be useful to existing and potential entrepreneurs and to those engaged in training them, In the end, it is the risk-taking entrepreneur who can make things happen in our efforts to industrialize. But with scarce resources, the entrepreneurial risks must be minimized. We acknowledge with gratitude the generous support provided by the Canadian International Development Agency (CIDA) and the International Development Research Centre (IDRC) of Canada towards the accomplishment of this project. Their contribution would be of immense value to the Third World. LEON V CHICO Executive Director TECHNONET ASIA
I rrrnnnl
IPT T nu
NC one gets rich working for others. This truism has, of late, been strongly underscored in the current efforts for achieving economic growth, Hence, the developing societies' focus on the stimulation of the enterprising spirit, the attempts at nurturing a unique type of individual whoworksfor no one but himself, that special breed known as the entrepreneur. Drawn from academic sources as well as from experiences and practices of entrepreneurs who have successfully founded their own small enterprises, the materials provided in this handbook are aimed at providing the reader with insights, information and knowledgeability on the theories, general principies and practices required to initiate and operate a small enterprise successfully. The handbook consists of nine chapters encompassing the whole enterprise development cycle - from the project conceptualization to the growth stage of the firm. Chapter I focuses on the entrepreneurial personality. Since it is an accepted assumption that th,ekey to business success is self-knowledge, this initial part deals with the assessment of one's entrepreneurial potentials. Chapter II outlines the approaches available to the entrepreneur to identify business opportunities and screen venture ideas. Having made a decision on what business he would venture into, the entrepreneur must then plan and organize his project with :are and deliberation. How he should plan and make decisions on the varied aspects of the business to 2nsure its successful implementation is discussed in Chapter III. After carefully identifyir,g,planning and organizing the resources of his project, the entrepreneur is ready to actualize his project idea. Chapter IV, therefore, discusses the various management skills required of the entrepreneur. From Chapter V through Chapter VII, the three functional areas of management - marketing, production and finance - are thoroughly covered and expounded on. To ensure that his business is constantly in good health, the entrepreneur must periodically analyze it. Four most commonly used methods of business analysis are presented in Chapter VIII. Because the small entrepreneur is basically a dynamic individual, he is concerned not only with mere survival of his business but also with its growth. Chapter IX thus deals on the matter of expanding and diversifying the small enterprise. In summary, the handbook can serve as a useful and relevant material for both existing and potential entrepreneurs, as well as orovide valuable information to researchers, development workers and policy makers involved in entrepreneurship promotion.
-l-
CHAPTER
ENTREPRENEURlAL SELF-ASSESSMENT
The hey to br!cce~n6 bU;ILntihLJ knowing onen&(. .&I &$or,e beginning a bwi.wm, Lt in encsem.%l .to ,$ind oti &OL.A~L,( one indeed, ban .theho-c&ed entrepreneurial spirit. How much ai .thepmonal chtiactv&tic~ 06 the ~ucc~~b,[email protected] etiepaenewr doen he. pan~e~s~? Uoe~ he hme .the right mofivtioti ,(ohgoing into bwinuncl? Have the eventi and ci!mma&meed 06 kin .&$e phepaned him w& doh Xhe erbtkephenetit hate? To amum theLse quemXond, tkin chqtm Led a%e would-be ev&..epheneuhon a candid adve&ti& in ht.&(-explotion. So you want to start a business! That is a good decision for certainly, business is a most rewarding career as well as a challenging and exciting adventure. But maybe you don't quite know where and how to start a business. This chapter is intenc..dto guide youon ajourney of self-exploration, so that you may get to know yourself better. Why? Let's face it. Want'ingand doing are two different things. Succeeding in what you're doing is even another. Surely you don't just want to start a business; you also want to succeed in it,don't you? Well, know youmeL first. It is your key to success in business.
-2In a very real sense, much of what will make for entrepreneurial success arises from a healthy feeling of self-worth, borne out of a realistic se!f-appraisal and an awareness of one's own strengths and weaknesses. Many ventures fail because the men behind the scenes neg!ected at first to make an accurate assessment of their capabilities to carry their visions through to the end. While taking pains to determine the economic feasibility of the enterprise, potential entrepreneurs often overlook the one important ingredient that spells the difference between starting and staying in business: -the entrteptrcnew .&PM. It was this spirit that impelled all those famous, enterprising men to greatness. Columbus was an entrepreneur in much the same way that Henry Ford was one. Both knew themselves well enough to recognize their potentials and limitations. And they worked hard to develop the former and overcome the latter. The entrepreneur who wants to start right.starts with himself. If he believes at the outset that success comes because of what one is and what he can be, then he would have started right. Are YGU an entrepreneur? How much of the entrepreneurial spirit do you have? This chapter will help you answer these questions. Initially, it leads you to assess how much of ,thepersonal characteristics of the would-be entrepreneur you have. Then it encourages you to judge your motives for setting up a business. Finally, you are guided to recall events and circumstances in your life to see whether you have been sufficiently exposed to the role you are expected to fulfill as an entrepreneur. Thus, at the end of the chapter, you will have answered the followinq questions: 1. Are my characteristics (thoughts,actionsand abilities) iikely to help me succeed as an entrepreneur?
2. 3.
Is entrepreneurship the career for me? if I were an entrepreneur? YOlJR THOUGHTS, ACTIONS AND ABILITIE
- v -?
ha Tiieentrepreneur likes to win, and to win the hard wa ?I T",?fgaapc *ILIIC.Ll _ ...- -- ..A n=ii.-.i* sets out on anything that is either too risky or too*easy. He likes challenging ventures,,those that involve moderate chances for success or failure. He feels happier and more pleased with himself when he succeeds in a task where others fail or fear ta enter. Unlike the ordinary man, he does not shun risks but almost seeks them. He assesses the risk involved in terms of all his resources. He asks himself: "DO I have enough technical knowledge, management, expertise, money and personnel to carry out such a plan? Are my financial, technical, market, raw material and energy resources adequate? If not, what can I do to make up for the inadequacy? Is the missing element essential to make the business succeed or is it possible to go on without it? Based on his assessment of the situation, he decides whether the venture is worth taking or not. He favours a risk where there isabout 60% chance that he will win. COES YOUR EMOT70VAL 7NVOll'EMENTWZTH THE GOAL REFLECT HOPE UF SUCCESS At@ FEAR 0F FAILURE? Once he has set his illind a goal, the entrepreneur imagines how he ;dould feel on if he should succeed or fail in attaining it. He expresses these desires to himself and to others around him. His emotional involvement with the goal is total. The goal means so much to him that he thinks about it mostly in r;ermsof winning. He gets so pre-occupied with winning that he plans his strategies and tactics well in advance. Fearing failure, he identifies I;ossibleobstacles and barriers to the gcal , and prepares himself to prevent or overcome them. However, he is optimistic despite the possibilities for failure. He is so hopeful and bent on succeeding that he sees the future as bright and promising, not dark and gloomy.
-4-
The entrep:-eneurpursues his goals to the best of his ability. He runs after it as if his yet-yexistence depended on it, harnessing for it all his talents, skills, abilities and emotions, Hi.s involvement is total. He persists, perseveres and works so hard even in the face of much adversity. He cannot stand unfinished tasks. No stress is too great for him for he thrives under stress. ARE YOU ENERGETIC AND MOBILE?
Entrep:-encursmake the worid go round. They are so full of vigour and vitality it is difficult to resist them. Their energy is catching. They work beyond eight hours daily, much more than the normal capacity of most people. They work and drive themselves so hard it's a wonder where they get trlesurplus energy. They also tend to be mobile. Boring, routinary jobs don't attract them. Unpromising communities exasperate them. They therefore tend to move from one job to another, from one city to another. They are never content wl'th the mediocre or the ordinary. DO YOU WAN7AN'D USE FEEDBACK? Entrepreneurs consistently want to kitowhow well they are doing sc, ,thatthey are often called recognition-seekers. They are, in a sense, for they delight in knowing thst they have done a splendid job, However, they don't seek feedback just for the pleasure they feel in being praised, but rather to know more about how they perform. Whether positive or negative, the feedback is welcome input to help them produce better and accomplish more. They always view events as learning opportunities, the past as aids in decision-making. They look for nasty feedback, digest them and act on them so they cease to be pitfalis in the future. Because they are open to feedback they are flexible. They do not stick rigidly to plans when they have ceased to be workable. Even in planning the business they consult with others (experts, consultants, friends, relati-res)to gain feedback about goals. They are objective. 00 you ENJOY TP.KTNG PERSONAL RESPONSZBlLTTY FOR ACTIONS AND ZXIXSTCNS? The entrepreneur badly wants to be the one i*esponsiblefor a job well done. He cannot sit in a team as a hardworking member while another gets all the glory that winning bri'ngs. He leads and makes things happen.while all the others either watch or follow or are unaware of what's going on. He originates ideas and action. He takes the initiative. While others go on dreaming of great things, he actively does his best to get things done. He believes he is personally responsible for the way his life turns out to be, Success to him is a product of personal effort, not luck or fate. ARE YOU SELF-CONFIDENT AND SELF-RELIANT? Entrepreneurs are men of guts and steel. They are strong; they are tough, They have faith in their ability to win and they show it.. They pursue life with infectious confidence. While the rest of the world regards the environment as formidable and overpowering, the entrepreneur views it as something that can be conquered and subjugated. He is willing to plunge into the unknown, Because of this, many people find entrepreneurs (especially those who are still starting and have not established their names to back them up) too risky to support. They seem to overestimate their capacities. Overconfident? In a very real sense, they are. It is no surprise to discover that a successfut entrepreneur
-6-
-1..But they did not y:ve up when they failed. They kept on going, not iosing heart. Perhaps because other people tend to view the entrepreneur as too risky for comfort, he is forced to pursue his activities alone. But with or without others, he can get things done because he is self-reliant and independent. He has learned that he is his own best asset. Money, fr;er&, contacts -- all of these merely augment and support what he himself has to offer: hardwork, ambition and competence. ARE YOU KNUWLEVGEA&LE: Although many successful entrepreneurs did not reach high school, much less college, all of them are knowledgeable; they are usually ex.pertsin their trade or in the product that they produce. They learn about it well enough so that they don't wholly depend on"experts"to tell them what happens, how, where and when. They also recognize the value of current events: what's going on, where and why. This is why they get ahead, much earlier, than most people. They get informed. They usually read widely and educate themselves continuously about things and events. The kno:qlrdgethey get from others makes them wiser.
has
I. .r . -1. Y . * L ^ rr,3t.rrry I
rat
I . ..^^^ rurc3.
L rl-.-.. ivlariy
I:--L III~5
-.._._ uver,
iht?y
hive
cjverxs
i imd ied
ihemsei
ves .
An entrepreneur can talk in a way that excites other people. He x,ightbd poor, with no land, no car, no big family name, no master's degree. But he dreams, and he talks of his dreams in a way that makes other people dream with him. Therefore, a relative lends him a land title, a friend lends him some money (enough for personal equity), another friend lends trima car. He talks to a friend who agrees to drive him to a bank, he presents all his acquisitions to the bank manager and he walks away with a loan to start his business. He talks to competent skilled hands around the neighbourhood promises them a good future with him, and off they go to start a business on a small pay and a hjg shared
-7-
dream. All the people he gets in contact with do what they can do for him becz-rsethey are willing to do it. In other words, he can 'influenceand inspire oeople. DO YOU HAVE MANAGERTAL A73717TlES? The entrepreneur is a leader. He runs his people in a way that makes them willing and able to do things for him. While he definitely controls the business, he is able to delegate some functions to his men so that he has more time for creative activities such as finding ways to improve his product, looking for new markets and expanding his enterprise. He is rational rather than emotional about managing his business. If his venture has grown beyond his capacities, he is willing to take in more people to work with him if they can provide assistance (e.g. funds, expertise) in making his business grow even more. In the face of pressure (whether from people or from circumstances), he decides and acts on the basis of what will work best for the business. For instance, when hiring, he hires on the basis of expertise and resource potential for the business, rather than on the basis of friendship or relationship. Unless it will do the business much good, he is not ready to compromise standards and policies simply because he doesn't want to hurt subordinates, whoever they are. He is decisive and firm, strict but fair, all to attain what he wants to get.
ARE you %NATZVE~ Entrepreneurs believe that there are always new and better ways of doing things. They are creative. Oftentimes their ideas may be wild or fancy but this merely They are ever indicates their pre-occupation with the nc~ and the &~~~tive. discontented with present ways, no matter how comfortable they are. They think of increasing the comforts! They are imaginative about the products that they A,...^,.& .-a..,,They dare ts be different 1r-i Ill"3 . tne way they make and sell -...*,-I...-.+- L .' JCI I, p,"UUL Lzl n I . always, they are worth the difference.
-8-
Entrepreneurs are interested not only in the end result (attainment of the goal) but in the process of attaining it as well. They are concerned with excellent performance, setting high standards for themselves. Once they have committed themselves to a goal, they pursue it with a flourish, so to speak. And they do it for the satisfaction that they get from doing an excellent job. Often, they have been described as working with excellence for excellence sake rather than for the rewards that attend excellent completion of a task. In business, therefore, they actually don't work for the profit (they use it as a feedback mechanism to tell them how well they are doing) but for the growth potential of the firm. The preceding discussion is by no means exhaustive in terms of describing effective entrepreneurial behaviour. So much has been said about the entrepreneur, and everything indicates that successful entrepreneurs are indeed a people set apart, exhibiting exceptional patterns of behaviour. What is even more interesting is that this ezceptionaZity is not inborn, but largely learned or acquired. There are evidences to show that individuals can and do successfully teach and train themselves in adulthood to think and act like accomplished entrepreneurs. We challenge you to do the same; Lise the insights you have obtained from this chapter to start you off on an inventory of your own strengths
-9-
and weaknesses. Pursue a program for developing and enhancing yourself on areas where you find yourself weak. The questions were, no doubt, too general for you to assess yourself objectively, You may want to know just how much of a risk-taker you are: high, medium or low? In that case, you will find the rating scale in Appendix 1 helpful. The scale consists of 96 items which represent the.12 characteristics of the entrepreneur as discussed in this section.
YOUR
MOTIVES
Your reasons for wanting to put up a business are just as important as the type/ nature/form of that business. Here is a short checklist of reasons most people have for wanting to put up a business. Check those which apply to you, and include others which may not be listed. MUNUARY To earn a living To get rich For additional income/profit For financial stability/security
To To To To SERVTCE
gain prestige/status be recognized and respected be a model tc rural folks meet many people
To employ people To upgrade the comnunity To help the community's economy FAMTLIAL For son's/or family's future To win wife's/husband's loyalty To please father/mother SELF FULFILLMEh'T To To To To As be own boss/be independent achieve/fulfill something through business avoid employment be productive; use personal abilities challenge to own capabilities
7
- 10 OTtfEQS
Now, go back to the list and rank yourreasons according to AmpohAance. them here: (Most imoortant:) :: :: 5. (Least imoortant:)
Record
Note what you have written as most important for wanting a business. This indicates your main motive for setting your business goal. Is it a good enough motive? On motives, psychologists tell us that those which relate to an individual's need for self-actualization exert the most influence on behaviour because actions motivated by these needs tend to persist in time; they are long-lasting. This follows because self-actualization is a life-long process. It is a need within a person to respect himself, to feel whole- fully human and dignified in every respect. This need is the last of all human needs that gets satisfied because it is not vital for survival. You have several other needs and wants that demand satisfaction and which underlie your every behaviour. These needs differ in intensity in terms of their effects on behaviour. Once satisfied, a need ceases to motivate your actions and other pressing needs attract your attention. This goes on up a hierarchy of needs, depending on the satisfaction of those on lower levels. Maslow i/ has arranged them as follows:
- 11 -
Examine your reasons for setting up a business. Are they anchored on your need for self-realization? Or on lower needs? Are your motives mainly security, social or physiological reasons? Js it mainly money and profit that you want? You will do well to cotint the cost in starting a business. Know that a business worth its salt usually doesn't pay back immediately but only after years of good, efficient hard work. Be cautioned. You must be prepared to lose during the first few months (or years) because you actually will have to give out more money and energy than you will initially receive in return. Can you see why your motive must be anchored on self-fulfillment? If it is not, you are most likely to get frustrated because of the length of time it takes for returns to come. Meanwhile, how will you and your family eat? Consider - it may be too great a risk for you. Actions motivated by the need for self-actualization tend to persist in time. Perseverance stems from the nature of the need. It takes a lifetime to satisfy and it is vital to one's self-respect. In business, persistence and perseverance can be a most valuable asset in meeting t?e inevitable: the various trials and hurdles that await you. Temptations to quit will be plenty and inviting. Learn from the great men of enterprise. They had the will to go on. They viewed their plans in terms of long-term goals so as not to lose perspective. Are you prepared to stick through your plans? Would you meet the~cha.&enge? YOUR READINESS FOR THE ENTREPRENEURIAL ROLE
Past events, circumstances and situations in your life play an important part your character formation. For the most part, it has rnouldedyou to become a pb:son with specific attributes to best fill a role in society. Depending upon how it has moulded you, your past will determine your contentment and satisfaction in any occupation. It has equipped you with abilities, exposed you to circumstances that will enable you to function best as an individual. Your task is to find out if these preparations meet with no contradiction in the entrepreneurial role. You want to be sure you're on the right path and can go right ahead with confidence and full assurance. Take your personal history. Have your life circumstances favourably prepared you in terms of attitudes, traits and dispositions to enable you to meet the exacting demands of a business-career? For instance, Were your parents more permissive than authoritarian? Were you, as a child, trained to be self-reliant and independent? Was your family economically (status) progressive? Were your parents (relatives or close friends) in business? Did you have to deal with some anxiety-laden or stressful situations (such as death, separation, poverty, rebellion against parents)? 1 to
12 -
Have you tried to rise above an unpleasant life circumstance on your own?
The essence in asking yourself questions like these is for you to take stock of your own experiences in independent, risk-taking, decision-making and goal setting. In other words, to honestly see for yourself just how entrepreneurial you have been in the past. In your aspirations to become a successful businessman, there will be times when you meet obstacles and frustrations. It may be easy to lose heart. One way to be prepared and not be disco)Jragedis to respect yourself from the very start. If you have had a very S-iab? 2, sheltered and comfortabie childhood, so much so that you had no adequate exposure to independent decision making, don't despair if you commit error in making decision at the start. Take the failure as a learning experience. Accept your weakness, and learn how to make it less of a problem. Further, try to explore the degree to which you have involved yourself with your business goal. HOW pre-occupied have you been with your plans? Think back as far as you can remember. When was the very first time you thought . How old were you then? of owning a business? Ponder upon the result. That's Subtract this from your age now. how long you have been involved with a career in business. Are there other goals in your life which pre-occupied you longer or just as long If there are, are as your goal of becoming a businessman did? Did you answer yes? they in conflict with your business goals? Then now is the time for you to resolve the conflict. Haw important is it for you to accomplish these other goals above the business? If they should come first, lay this handbook down and set it aside. You should not start the business with half of your heart somewhere else. No matter what it is, the business you are planning demands and deserves your whole attention, your whole devotion and total commitment. Less than these, you cannot expect success. Pursue something else. Business cannot be secondary, it must be your No. 1 concern. How involved have you really been with your dreams in establishing a business career? If you were struck with the idea in your youth, do you remember having toyed with it over and over again in the past up to the present? Over the years, have you come to place value and importance on this gcal so much that attaining it will mean to you a realization of your self or your personhood? We suggest that the longer and more strongly you are involved with your goal of becoming a businessman, the more persistent you will be in your pursuits to be one. Long-term involvement with a goal is highly associated with persistence in activities that lead to its attainment. And almost always, persistence makes for success in business! This is because persistence indicates the degree to which YOU have identified yourself with the goal. Are you inclined to attach your very existence upon the business? You may have to, in order to succeed. As Marquis de Vauvenarguesput it . . . "In order to carry out great enterprises, one must live as if one will never have to die."
- 13 -
CHAPTER
II
genem..te wotihtie venture idm, Thme ane a&o 6owrced 06 in~orontion and an&stince in kin coutiy .toguide him ;ta pnoject oppo~ni.Ct~. fioweve~~, a&tti he. ham mohe ok lena idw&i&&d a pltojec;t idea, the euu%ep&enewr doecl no.t ,immetiti&y commit kin henoWrces and c.?.vwqy $0 an expennive phOje& 6caucbLUty htidy. Thme ahe Iwo pmlfAn&my apphoachu avaLLab.te Xo Xhe cL%thephcnu to ,&.&hen 6m-xn ventwre idean be4ok.e going into a phe-&ahib.L&i.ty mtudy and, ,$Ln&y, a pmjec-t @mibZ.Lty htudy.
Business opportunities frequently originate from an idea. It is, therefore, important for a would be entrepreneur to keep a keen and open mind with which to generate and perceive business ideas and discriminate which ones are worth further study for their economic potentials. In the process, he would do well to remember Shakespeare's advice that a.&!z%aX gWm & noX gold or that of Henry L. Shih when he observed quite perceptively that &LU peop.& &ecogtize
oppo&wuXy
became
it
& o&x
dingtied
m hand wh.k.
There is no surefire method of choosing the best type of business to go into. However, there are various guidelines that can assist the prospective or existing entrepreneur who is seriously on the lookout for business opportunities.
- 14 -
ASSESSMENT
OF THE
ENVIRONMENT
The ability of an entrepreneur to perceive and identify business opportunities is proportionate to the degree to which he is aware of the economic, political, socio-cultural and technological developments in his environment. An assessment of the environment for what it has to offer in terms of opportunities and risks is the foundation of opportunity identification. Scanning the environment is then a mental exercise an entrepreneur has to perform which should be supplemented by some physical effort. POLITZCAL ENVTRONMENT The political climate is, in part, a measure of the over-all investment climate prevailing in a country or state. It is important for a prospective investor to consider the positive actions which the government has taken to encourage private investment. These measures include the promulgation of liberal or non-restrictive investment policy, existence of an investment promotion centre, creation of industrial estates and free trade zones and availability of low-cost loan capital to private investors. The government of Bangluduh, for instance, has published an Indu~titi lnvenkmeti SC&&.& indicating separate allocation for small and cottage industries and a G&de to Invatient in [email protected]~h to promote and attract industriai activities. Seeking to achieve a balanced development ofthecountry, the government allows some preferential facilities and tariff concessions to those industries located in the BSCIC (Bangladesh Small and Cottage Industries Corporation) industrial estates and outside selected developed industrial zones. Likewise, certain additional facilities like lower interest rates are provided for export-oriented industries. The governmen% sees to it that the facilities and concessions are provided to the developed and the relatively less developed or underdeveloped areas of the country on a differential basis. Among the government institutions aiding small entrepreneurs in Fiji are the industrial promotion division of the Ministry of Commerce and Industries which provides consultancy services and conducts training for new entrepreneurs; the Fiji Development Board for credit assistance; the business opportunities and managr?went advisory services of the Ministry of Fijians Affairs which guides the indigenous entrepreneurs who wish to start their own business; and the Fiji National Training Council which administers all training in Fiji, provides advisory services and conducts on-the-job and off-the-job training to all sectors of industry. The government does not bestow any special favours to small manufacturing enterprises in 14o~gKong but guidance and direction necessary for the growth of manufacturing are rendered by a number of government departments and semiofficial institutions. The government acts to help develop markets and guide entrepreneurs through import and export licensing exchange controls, preferential tariffs and the like. Overall, the business climate in Hong Kong may be briefly described as "laissez faire with direction." In Tndonebti, the issuance of Presidential Decree No. 14 has created a more favourable climate for small enterprises. The decree mobilizes various agencies of the government like financial institutions, trade agencies and
regional governments to assist the sector. The establishment of trading houses and mini-industrial estates is also being planned. Production initiation centres will also be set up in certain regions with high potential in terms of raw materials and manpower utilization. The Guidance and Development Project for Small Industries (BIPIK) plays a pivotal role in developinq small enterprises in the provinces. Likewise, the Development Centre of &all Industries (PPIK) functions as command posts in the regions. Industrial areas for small and medium industries have been established in Kohtoa. As of 1978, there were 11 industrial areas existing. The local industry promotion law has been promulgated to disperse industries, utilize idle manpower in small towns and achieve equitable income distribution. Likewise, the Industrial Placement Law of 1977 was enacted to promote rational distribution of industries and rational placement of factories. The latest incentive law established is the Small and Medium Industry Promotion Corporation. The Corporation has drawn up plans for the development of industrial areas with provision for common facilities. Under the MuCaybtin New Economic Policy, small enterprise development has become more relevant and has been recognized as an important vehicle for achieving development objectives. Aware of the problems and potentials of small enterprises, the government established an advisory council for small enterprises and business in the early 1970's under the chairmanship of the special economic adviser to the Prime Minister. The Malaysian Industrial Development Authority (MIDA) provides services like feasibility study preparation, conduct of industrial potential surveys and techno-economic studies. The Standards and Industrial Research Institute of Malaysia (SIRIM), on the other hand, provides technica? assistance required by small enterprises such as guidance on the choice of raw materials, industrial research and installation of machinery. The Majlis Amanah Rakyat (MARA) provides management consultancy, training, project identification and credit services. The Malaysian Industrial Development Finance Board, Industrial Consultants (MIDFIC) also carries out market surveys and prepares feasibility studies for new projects and advises entrepreneurs on product diversification and efficiency improvement for a fee. The National Productivity Centre (NPC) provides a wide range of consultancy services as well as training programs. In the PU!ipp&m the economic priority plans list down investment areas where government incentives are available to investors. These priority plans include, for 1980, the 13th investment priorities plan (IPP), the 6th public utilities plan (PUPP), the 11th export priorities plan (EPP), and the 3rd agricuitural investment priorities plan (AIPP).
Pumbansa 44, otherwise known as an "Act to Promote Investments in Less Developed Areas," seeks to encourage the establishment of industries in less developed areas by granting added incentives on top of those given by the Board of Investment and financial advantages for locating in these preferred areas. For instance, registered enterprises under this law with total assets of less than P 1 million (Approximately US$ 13,200) are exempted from payment of filing, processing and other fees required by the Board of Investments and the Securities and Exchange Commission. Batasang
- 16 -
Through its Small Industries Finance Scheme, Singapow gives financial aid to small enterprises in the form of equity participation or as loans at rates lower than those offered to large ones. The National Productivity Board provides consultancy review and training programs to small enterprises. The Jurong Town Corporation has constructed more terrace factory buildings and workshops to match the growing demand for smaller factories. The project was undertaken in line with the government's policy for parallel development of small enterprises with big multinational companies. In X L&U, government agencies promoting and developing small enterprises include the Industrial Development Board (IDB), the Department of Textile Industries and the Department of Small Industries. The IDB is involved in the identification of feasible projects, provides consultancy services and marketing research assistance, and conducts seminars and workshops for small entrepreneurs. In Th.a&znd, the Small Industries Finance Office of the Department of Industrial Fromotion (DIP) makes low interest credit facilities available to small enterprises. The Industrial Service Institute renders technical extension and advisory services, trains managers and skilled workers as well as develops prototypes of simple machinery and equipment. It also carries out market surveys and prepares feasibility studies for new projects,as well as conducts industrial potential surveys. In order to assist small enterprises in marketing their products,particularly handicrafts, the DIP established a handicraft retail centre in Bangkok called "Narayana Phand Handicraft Center". The Export Service Center of the Ministry of Commerce is actively involved in promoting export-oriented enterprises. It is also very helpful to study the implications of government projects in terms of potential business opportunities for manufacturing goods not previously marketable in the region. On the other hand, the growth of a priority industry almost always creates opportunities to establish others. The identification of these possibilities can be done by analyzing the backward and forward linkages of the industry. This relationship is illustrated in Exhibit. 1. Taking a concrete example, one of the Philippine Government's 11 major industrial projects is integrated pulp and paper. The possible backward linkages that this project creates include wood industries, sugar and fiber. On the other hand, forward linkages include printing and publishing, packaging bags and boxes and corrugated cartons. Analyzing the political environment is, therefore, a necessary tool in seeking answers to such questions as: What is the government's policy vis-a-vis small enterprises? Bow actively and sincerely is the government translating this Policy in terms of plans, programs and projects? What incentives does the government give to small entrepreneurs? What are its priorities in terms of 'typesof enterprises and areas.of the country to be developed?
- 17 Exhibit 1
J)
I
Slaughterhouses, meat packers
\1J/ 4-q
Food Printing& processing C(labels) Piastic manufacturers (wrapping containers)
Fertilizer
Chemical plants
Sinha, Aghibtiintid:
A Ntiance
LM Evehy
Ahpeti,
21
- 18 -
ECONOMTC ENVIRONMENT A critical appraisal of the general state of the economy and its prospects provides meaningful information such as per capita income, current income, savings, credit availability and income distribution to potential investors. An expanding economy means a concommitant increase in the number and extent of industrial, commercial, agricultural and service facilities. An analysis of the economic environment is particularly helpful in investment decisions, market measurement and especially in forecasting to be able to recognize which type of growth pattern the economy is following. Soriano and Nehrt articulated this point in this manner: "Of particular importance, beyond the growth in GNP, is the population growth. This is usually underestimated, resulting in more consumption, less investment, slower growth, lower per capita income, a sharper, but broader-based pyramid of income distribution. All of these results are critical to the!demand for different types cf products and services and to many, many other aspects of the environment." L/
Government statistics on local production, imports and exports and consumption of commodities pro\:idea clue to what may be in demand, in short supply, or in excess in one area. For instance, considered along with local production, imports indicate an existing market, thus suggesting new opportunities to satisfy a proven demand. This is particularly true when, due to higher handling and transport costs, many imported goods can be substituted by local products. Imports here do not only include products coming from other countries Lcltalso include commodities flow within the country or even within a region, province or locality. In studying government statistics, it is possible to break down broad classifications in order to get more meaningful individual product data. --/Soriano and Nehrt, Btiina~ YotQy in A&an Conle~A, p. 15.
- 19 -
Related to the use of government statistics is the identification of business opportunities through the use of industry lists, such as the ItiehnatiaMne SXu.ntid C&hi&-n (ISIC) Cade which provides a common classification of industrial activities and is widely used by almost all governments. The code is useful for suggesting ideas and making sure that no possibilities have been overlooked. Exhibit 2 illustrates this point.
Just as a potential investor should study import statistics and its related activities so should he analyze export data and exporz developments. This is particularly relevant to developing countries because export promotion is a recent thrust of their governments. Export data reveal opportunities for upgrading the quality and nature of existing export products by some improvements or degree of processing. One should examine government publications as well as those of private industry associations on trade opportunities. It may also be helpful to investigate local materials and resources. The availability, quality and price of certain raw materials (minera1, forest, marine and agriculture) in the region or locality and other production elements (power, skills, climate, etc.) may suggest opportunities for productive activities.
- 20 -
Exhibit 2
Example of the Uses of ISZC Code As a Checklist for Generating Venture Ideas 32 321 3211 321111 32112R 32113 T 3212 321211 32122V 32123W 3213 3214 3215 3229 323 324 Textile, wearing apparel and leather industries Manufacture of textiles Spinning, wearing and finishing textiles Wearing hemp textiles Hand weaving Cotton textile mills Manufacture of made-up textile goods except wearing apparel Manufacture of house furnishing Textile bags factory Canvas bags, and other canvas product factory
Knitting mills Manufacture of carpets and rugs Cordage, rope and twine industries Manufacture of wearing apparel, except footwear Manufacture of leather and products of leather, leather substitutes, except footwear and wearing apparel Manufacture of footwear, except vulcanized or moulded rubber or plastic footwear.
- 2-l -
By using a checklist on possible small-scale enterprises based on local raw materials, the following opportunities may be mentioned as examples of forestbased industries: furniture toys bamboo products chopsticks coat hangers toothpicks and popsicle sticks ENVZRONMEM door and window frames wooden handles for tools wooden crates and boxes alphabet blocks rattan products wooden electrical accessories
SOClO-CULTURAL
One way of identifying business opportunities is by analyzing population characteristics, buying habits of the different market segments and their cultural differences or similarities. These various ramifications are illustrated in Exhibit 3.
TECffNULOG7CijL
ENVZRUNMENT
New developments in science and technology continually create new industrial opportunities. As Kotler aptly puts it "Every new technology may potentially spawn a major industry." Hence, one should continuously examine local raw
= 22 Exhibit 3
Geoghupkic:
Country Region Prcvince Town ex. ex. ex. ex. Philippines Central Luzon Bataan Baliwag
vemogftaphic:
Sex Age Family size Family life cycle Income Occupation Education Religion Race Nationality Social Class Life-style Personality Benefits sought User status Usage rate Loyalty status Readiness stage Marke,ting-factor sensitivity ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. ex. male, female under 6, 6-11; 12-17 1-2; 3-4;.5t young, single; young, married; no children under $5,000; $5,000-$7,999 professional and technical clerical, sales grade school or less; college graduate Catholic, Buddhist, Muslim White, Oriental American, Chinese, Malaysian lower-lower; upper-lower swinger; status seeker compulsive; gregarious economy; convenience; prestige non-user; ex-user; regular user light user none; strong unaware; aware; informed quality; price; service
/Kotler,
Marrkting Munagem~,146
- 23 materials and existing products for possible utilization and improvements. Osborn, for instance, came up with a list of questions to stimulate ideas for changing attributes of a certain product. (See Exhibit 4) Examples of technological advances include a mini-ice plant, seedless watermelon, higher-recovery rice milling machines, more durable farm implements and bio-gas utilization, among others. Many of these scientific advances may be particularly suited in developing countries. OBTAINING INFORMATION SOURCES AND OF ASS ISTANCE
IUENTTFYTNG
TNFORMATZUN
The problem of generating venture ideas can be minimized if the potential investor knows what information he needs and where to find it. Successful generation of ideas for new and improved products, according to the U.S. I;mali Business Administration, "requires a base of reliable information." More often than not, there is a wealth of information lying around; the problem is identifying who stores or possesses this information resource. In the Philippines, for instance, the UP Institute for Small-Scale Industries (UP ISSI), under a grant from TECHMONET ASIA published a Z%ectotry ~6 N&&,& Sowrced 86 ln&rma,zXon ton.S.m&-So&e h&ma. The book identifies and locates information centres for small enterprises and catalogues in a systematic manner the information resoulrces,facilities and materials available in each centre.
- 24 Exhibit 4
Questions Put to other uses? Adapt? Modify? Magnify? Substitute? Existing: Potential: Existing: Potential: Existing: Potential: Existing: Potential: Existing: Potential: Existing: Potential: Existing: Potential: Combine? Existing: Potential:
Examples industrial alcohol fuel alcohol denim pants denim bags coal coal briquettes cocktail hot dogs jumbo hot dogs tin can, bottles plastic containers, tetra pack ice plants portable mini ice plants tools for right-handed users tools for left handed users air conditioner, cooler air conditioner-cooler
Minify?
Reserve?
/Osborn,
App.&ea 'Imag.LvuSon,286-87
- 25 Likewise, the National Science Development Board regularly publishes the results of its completed research and development projects. These cover a wide field ranging from agriculture and natural resources to industry and energy. Philippine magazines and newspapers, which provide information on business opportunities, new technologies and new products include The Bwine66 Day (with its regular features of new products/new processes, industry profiles, business and economic trends),The Expoti Weeh (with concentration on export trends and trade opportunities, the CSMZ (Council on Small and Medium Industries) Ne~~&!ette~and the Smu.42 lndr.mky Jow~n& published by the UP ISSI. Ne&%ueeh, an international news magazine, also has a regular feature on new products and processes. Of course, the potential investors must not forget the wealth of data available from the various publications and researches of government agencies such as economic planning bodies, statistics offices, government development banks, the central banks, the customs office, the investment promotion bodies and the various ministries.
- 26 -
Private associations and organizations also publish industry studies and business trends. In the Philippines, for instance, these include the Philippine Chamber of Commerce and Industry (PCCI), the Small Enterprise Research and Development Foundation of the Philippines (SEHDEF), Economic Develo ment Foundation (EDF), Private Development Corporation of the Philippines (PDCP! and Sycip Gorres & Velayo, Inc. (SGV), among others. ?DENTTFYING SOURCES e)FASSTSTANCE TECHNONET ASIA participating countries are increasingly aware of the importance of small-scale enterprises to the economy, not merely for their sheer number but more importantly their potential contributions to the economy in terms of employment generation,income distribution and industry dispersal. Thus a host of government programs have been formulated and many governmental and semi-governmental agencies have been mobilized to assist and develop the small enterprise sector. It may be mentioned that many of these agencies are not exclusively engaged in aiding small enterprises but serves other industry sectors as well. Following are the main agencies rendering assistance which the entrepreneurs may approach:
1. Bangladesh Small and Cottage Industries Corporation (BSCIC) - for credit assistance, technical assistance, marketing assistance, training, extension and technical information services. 2. Department of Industries - for oolicv formulation, guidance on investment laws and opportunities, and registration'of the businesS . 3. 4. 5. 6. 7. Bangladesh Shilpa Bank - for credit facilities Nationalized Commercial Bank - for credit faci1ities. Bangladesh Krishi Bank - for credit facilities to agro-based industries. Investment Corporation of Bangladesh - for equity support. Bangladesh Management Development Centre - for management training.
8. Bangladesh Industrial Technical Assistance Centre =-for technical assistance and technical training. 9. Institute of Business Administration, Lhiiversity training. of Dacca - for management
10. Technical and Vocational Training Institute - for technical and vocational training. 11. Bangladesh Handloom Board - for assistance to handloom industries. 12. Bangladesh Sericulture Board - for assistance to the silk industries. 13. Bangladesh Handicrafts Marketing Corporation - for marketing assistance of handicrafts.
- 27 -
1. Industrial Promotion Division of the Ministry of Cotmnerce- for training and extension services. 2. Fiji Development Bank for credit facilities.
3. Business Opportunities and Management Advisory Services of the Ministry of Fijian Affairs - for small industry promotion and advisory services. 4. Fiji Institute of Technology - for technical training. 5. Fiji National Training Council - for skills and management training and advisory services and research assistance. In Hong Kong 1. Trade, Industry and Customs Department - for the conduct of overseas commercial relations, industrial development and investment promotion. 2. Hong Kong Productivity Centre - for consultancy, researcn, information dissemination and training on productivity. 3. Hong Kong Export Credit Insurance Corporation - for export credit guarantee. 4. Hong Kong Training Council - for training. 5. Hong Kong Polytechnic - for research and training in technology, science, arts and commerce.
1. Directorate General of Srrfiil Industry of the Ministry of Industry - for technical, managerial and marketing assistance, management training and entrepreneurship development. It has a special program called "BIPIK" (Guidance and Development of Small Industries) with branches in the regions and provinces such as the Development Centre of Small Industries (PPIK) and the Common Service Facilities (CSF). 2. Directorate General oi Cooperative - for cooperative development. 3. National Agency for Export Development - for export promotion and marketing. Tn Kohea 1. Small and Medium Industry Bureau of the Ministry of Commerce and Industry - for policy formulation, promotion, research and management assistance. 2. Korea Rural Industry Development Centre - for research, technical and management assistance. 3. Korea Federation of Small Business - for guidance services to members. 4. Medium Industry Bank - for credit, managerial and technical assistance. 5. Citizens National Bank - for cred it fat ilitius.
- 28 -
6.
Korean Credit Guarantee Fund - for credit guarantee and extension sertiices.
7. Small and Medium Industry Promotion Corporation - for policy, formulation, coordination and promotion.
1. Standards and Industrial Research Institute of Malaysia (SIRIM) - for industrial research, oroduct standardization, and technical information dissemination. 2. Malaysia Industrial Development Authority - for entrepreneurial development and information dissemination. 3. Majlis Amanah Rakyat (MARA) - for credit and advisory services to indigenous Malays. 4. National Productivity Centre - for skills and management training and consultancy services. 5. Malaysia Industrial Development Finance Board (MIDF) - for credit and equity provision and technical advice. 6. Credit Guarantee Corporation - for credit guarantees.
YUp~,&en
1. Council on Small and Medium Industries - for policy formulation and program coordination. 2. Agri-Business Development Centers of the Ministry of Agriculture - for agribusiness enterprises promotion and technical assistance. 3. Development Bank of the Philippines - for financial assistance.
jointly implemented by the Central 4. Industrial Guarantee and Loan Fund Bank and the National Economic and Development Authority - for financial assistance. 5. Small Business Advisory Centers of the Ministry of Industry - for consultancy and technical advice. 6. Bureau of Small and Medium Industries of the Ministry of Industry - for program formulation and technical and management assistance. 7. National Manpower and Youth Counci 1 - for technica1 and manpower skills training. 8. National Science Development Board - for technical and scientific research and extension service.
- 29 9. UP Institute for Small-Scale Industries - for entrepreneurship development, management training, economic and technological research and industrial information dfssemination. 10. Board of Investments of the Ministry of Industry - for priority industries promotion. 11. Development Academy of the Philippines - for productivity training and research> local study mission, industry promotion. 12. Ministry of Natural Resources - for extension and guidance services.
In wlgapohe
1. The Small Industries Financing Scheme, jointly administered by the Economic Development Board, the Development Bank of Singapore and the Overseas Chinese Banking Corporation, for financial assistance. 2. Economic Development Board - for extension service and manpower training.
3. National Productivity Board - for consultancy service and training tit-1 productivity. 4. Jurong Town Corporation - for industrial land development.
5. Singapore Institute of Standards and Industrial Research - for technical and consultancy services.
1. Department of Small Industries of the Ministry of Rural Industi.ialDevelopment - for training, consultancy and research assistance. 2. Ceylon Institute of Scientific and Industrial Research - for scientific and industrial research. 3. National Engineering Research and Development Centre - for scientific and technical research. 4. 5. 6. 7, Industrial Development Board - for consultancy and technical assistance. National Apprenticeship Board - for vocational training. Bank of Ceylon - for credit assistance and entrepreneurship development. National Institute of Management - for training and consultancy.
- 30 -
1.
2. Department of Industrial Promotion through the Industrial Service Institute for technical, management and training support, marketing assistance, entrepreneurship development, research and information dissemination, credit assistance. 3. Board of Investment - for pre-feasibility and industry studies and industrial promotion. 4. Industrial Estate Authority of Thailand - for the planning and administration of industrial estates for industry dispersal.
PROJECT
SELECTION
The guidelines discussed in the preceding section can help the would-be entrepreneur generate a wealth of opportunity ideas so that he maynotbeat a loss as to how to separate the chaff from the grain. In other words you should be able to distinguish between the worthless ideas and the ones that merit further study. It is a fact that many business failures would have been avoided if more project screening and evaluation were made prior to the venture decision. On the other hand, conducting a project study or even just a pre-feasibility study for each of the venture ideas is definitely out of the question. It is both extremely expensive and time-consuming. There are several simple steps that you can take to screen your venture ideas. But first, it would be helpful for you to understand the whole gamut of project development. Basically, it consists of the following stages: 1. ldenti~ictian - which basically deals with venture icieageneration and opportunity identification. 2. ?u!-beeeticn - which covers the steps to preliminary screen and evaluate the ideas generated in step 1 and includes the pre-feasibility analysis. 3. FomuWXon - which consists of the formal project feasibility study to include market, technical and financial analysis. 4. EvWon - which calls for a decision based on the output of step 3. This may be a go cr no-go decision or a decision to modify the study based on certain objectives, criteria or values set by the proponent. These four stages, with their finer breakdown, are presented in Exhibit 5.
Identification
I
're-selection
I
I I
1 Terminate 1
No
Yes I
I
Evaluation 51 -
Terminate
- 32 -
How
TO
SCREEN
YOUR
BUSINESS
IDEAS
The first is a simple ya/no checklist against which you can change the viability of each of your ideas. A yen response should denote a no-go signal. 1. Are there restrictions, monopolies, shortages, or other causes that make any factors of production unavailable at reasonable cost? (Examples are scarce skills, energy, special materials or equipment, processes, and technology). 2. Are environmental effects contrary to government regulations or good public relations? (Examples are air, noise and water pollution). 3. Are the capital requirements excessive? (If the project requires large amounts of unavailable capital, there is no point to further consideration.) 4. Is the project inconsistent with national policies, goals and restrictions? (Examples are import restrictions, foreign exchange requirements, employment generation, industrialization plan). 5. Are there factors that preclude effective marketing of the product !e.s., need for an extensive sales and distribution system which you cannot provide?) 6. Will the project be labour-intensive?
COMPARAT7VE RATZNG The second process is called the comparative rating of product ideas. Clifton and Fyffe came up with a scale where each factor can be preliminarily studied and rated from O-10. This rating scale is presented in Appendix 2. The authors explain that for any given product idea, a rating score for each of the major considerations is obtained by averaging the subfactor ratings. An over-all rating may be calculated as the sum of the average for each major area. It is suggested that if any majcr consideration has a very low value, the venture idea should be rejected.
- 33 -
TllE PRE-FEASIBILITY
STUDY
The product ideas that pass the above screening process can be subjected now to pre-feasibility studies. The whole idea of conducting a pre-feasibility study is to determine: 1. Whether the project seems to justify detailed study.
2. Whether the success requirements of the projects are present; e.g., raw materials availability in sufficient quantity, price, quality and the whole year round. 3. An estimate of cost for the detailed study.
The pre-feasibility study should be able to provide enough information to enable you to make a decision on possible alternatives you can take regarding the project, e.g., termination, acceptance or perhaps postponement of the conduct of the feasibility study until certain key environmental factors have changed or when uncertainties have significantly been reduced. The pre-feasibility study may include some or all of the following elements.l/ PtLodu& dem.ipazion. The product's characteristics should be briefly described, along with possible substitutes which exist in the market place. Also, allied products should be identified which can or should be manufactured with the product under study. The present and projected potential market and the DedtiptLon 06 mmket. competitive nature of the market should be delineated. Where is the product now manufactured?
How many companies exist and how specialized are they? What are the national production, imports and exports?
Are there government contracts or incentives? Mhat is the estimated consumption? What is the estimated product longevity or future consumption?
The techonology choices that exist for the OutLine 06 technological vti&. manufacture of the product should be described briefly. Also the key plant location factors should be identified.
L/ Ibid, 24-32
- 34 -
Labour (quantity, special skills). Proximity to markets and raw materials, Transportation facilities and costs. Water (quantity, quality, restriction).
- Others (personal preference,competition, tax considerations, environmental controls, and so on). Production factors such as raw materials, Avd.ubLUtq 06 main phoduc;tion bactoh4. waters power, fuel and manpower skills should be examined to ensure viability. Estimates should be made of the necessary investment costs and co&t ebtiatu. costs of operation. The data gathered should include estimates of profits b-12 06 pho&t. of firms manufacturing similar products or, if the preliminary data are extensive, an actual estimated profit for the project under study. Oxhen ti. In certain cases, the following factors may be the most important in the evaluation of the suitability of a proposed product, especially in the case of the establishment of a new firm. Local attitudes toward industry. Educational, recreational and civic data.
If the result of the pre-feasibility study is favourable, a plan to conduct a detailed study should now be formulated. You may not have the time nor the expertise to prepare the study. There are consultants and industrial extension officers, both from the government or private consulting organizations, as well as private practitioners who can help you in project feasfbility preparation, especially for the purpose of seeking credit from financial institutions. Nevertheless, a thorough understanding of a project study will round off your business knowhow. The following chapter on Phnting and OKgatizing a k.&mln discusses the mechanics of project study preparation in depth.
THEPROJECT
STUDY
Basically, the project study consists of determining the feasibility of the following aspects: Management dbpfx.tA - These include the type of organization, the number and qualifications of persons who will manage the business, as well as the determination of organization structure, key positions and activities.
MaJlkding ahpeti - These included&termination and quantification of past and future demand and supply, factors affecting demand and supply, nature and extent of competition, projected sales, appropriate pricing and the needed marketing program to enable the business to sell the desired volume of goods at a given price.
- 35 -
Techticae ahpectd - These involve determination of manufacturing process location analysis, raw materials availability and quality labour and skills requirement, production cost, waste disposal as well as utilities avai;lability. F&an* asped - These cover determination of project cost, cash requirements and profitability of project. The project study is almost always demanded by'a bank from a loan applicant for evaluation purposes. Thus, it is important that the study should be clearly stated, well-organized and comprehensive. While it is true that a project study is basically a projection, it must, however, be based on logical assumptions. Likewise, it should not mislead the users of the study - the entrepreneur himself, the bank evaluator or the suppliers. Even if bank requirement dispensesof the need to submit a project study (this is true in the case of the Industrial Guarantee and Loan Fund borrowers as well as loan applications with the Development Bank of the Philippines not exceeding P500,OOO or approximately US$ 65,000, or for that matter registration with the Board of Investment in the case of small industries in the Philippines) it is a good practice for an entrepreneur to have a blueprint of his envisioned project by means of a project study. While there are many formats of a project feasibility study, Appendix 3 presents a format containing the conuncncomponents of a feasibility study for a manufacturing enterprise.
- 36 -
CHAPTER
111
and making deckIons on many v.L&l aspeti 04 .the bwinuna the evukepneneukb tik and bhould no.t be de&ga.ted. Thid chap&~ @ovides b/roadgtidet.Lnebto p/r0 jeot pi!anning. The majo& abpecf.4 06 a phoject p&w - Xhe rnadzetbakdy, the technkal At buy and Xhe @uu~cial atidy - ahe dAubbed ti borne d&CL. .the p.kwuIng phahe, a%e evttrtepnenewl mubat&a guahd agoinbt bocat&d pmjec-t L%LWIA ok condi-tionr, athe envitonn~en..t in tti may theaten the bucce.bb 06 fhe prroject.
LA e.bbe~y
onganize hi.45 ph.0 jeti. OkganizaCion includes Xhe choice od .&gal hthing and ,OuulnLngpeuonnel, &vtm,, dec,&f.Lng bubinebb Location, deud&g tie @tan& package and oAhPn Legal anp~ti 06 bRanking
a bu&Lne.bb.
Once tie w0jec.t plan .42 compi!e.-ted, e.n.-&ephenewr the can proceed to
Planning and organizing is one of the first and mostcrucial decisions that the new entrepreneur makes in his young business career. You must plan and organize your enterprise with utmost care and deliberation. Why not! A new enterprise or new factory requires a huge capital outlay which will often take years and years to recover. The longer the recovery time, the greater will be the exposure to risks. Often, you will consider taking loans to finance your enterprise.
- 37 -
Your failure to plan and organize well may then mean possible loss of valuable personal and business assets which may be held as collaterals by financing institutions. On the other hand, a we1 l-prepared business plan and organization will help generate profitable returns on your investments. Needless to say, yours is the creative task of translating a project idea into reality. In this, your job approximates that of an artist. But after crystallizing the vision, you must necessarily plan. This is a function that usually cannot be delegated without prejudice to successr'ulimplementation of the project. It is you who have to make decisions on such aspects as machinery and equipment selection, product pricing and sources of financing. PROJECT PLANNING The size of investment required for a project determines to some extent the amount of time and effort needed to complete the project. A large investment calls for a detailed investigation of the project idea and, inversely, a small investment requires only a general consideration of the critical aspects of the proposal. Project planhing may be facilitated with the use of guidelines to project feasibility study preparation. Remember though that these are rather broad guidelines and you therefore have to make vital judgments when structuring your own project study. Although it may look similar to a hundred others,yow project, all things considering, is actually unique in itself. A good study, which is formally known as the project feasibility study, requires: .
.
gathering of all facts or opinions about the project. objective scrutiny of these facts and opinions to remove bias. orderly and consistent presentation of final output.
Generally, the feasibility study deals on the following aspects: M&et. This refers to the determination of the type and quantity of product which the enterprise will manufacture and sell. Pmdutin. This aspect covers methods and means of production resulting in conclusions about the type and quantity of equipment, manpower, materials and supplies. Economic ahpeotd . This is basically an estimate of cost and profitability.
THE PROJECTKTllERS Before you proceed to undertake a detailed project plan, you must consider that there are social, political, economic and other conditions that may threaten the successful implementation of the project. Being aware of these conditions at the planning phase will enable you to save precious time and effort which would have gone to waste had you rashly embarked on a detailed feasibility study on a project that would have failed anyway.
- 38 To illustrate this important point, the following cases in the Philippines are cited: Cube No. 1. An entrepreneur established a small sea side resort complex in an industrial site primarily to cater to domestic tourists. After about a year of profitable operations, a cement plant was established proximate to the seaside resort area. Cement dust polluted the area and the entrepreneur had no choice but to close down the business. Cube No. 2. An entrepreneur, after having been motivated to do business, invested all her savings, plus a substantial amount of borrowed money, in a garment shop in a small community. After several months of operation, she found out that her facilities could produce more than what the market could absorb. This situation led to the inability of the entrepreneur to pay her loan and to the subsequent foreclosure of the mortgaged property. Evidently, both cases point to some oversight in project planning. In the first case, the entrepreneur could have inquired from the local planning authorities regarding industrial resources of the location and could have been warned that it was potentially a cement quarrying area. In the second case, a more detailed market study and technical analysis could have averted the loss. Table 1 gives a more detailed illustration of these so-called project "killers." THE MWKET STUDY
DATA GATHERZNG The entrepreneur in a developing country is usually dependent on secondary sources of information in answering the objectives of market analysis [published). In an existing firm, the problem is already partially solved since secondary or historical data may be found fr,?rn company's files which can be processed to suit the required information. For new ventures, secondary data may be obtained from the sources shown on Table 2. The entrepreneur should use the data with caution if published information is found inaccurate or incomplete. If information gathered from these sources are inadequate, the entrepreneur may supplement them with primary information through personal interview on an informal basis of those already in business, customers or consumers already using the product or services, and small business consultants. Here, general rather than specific questions are asked to get a feel of the market, specifically regarding market situation and competitive products.
- 39 -
Element 1. Market
Conditions Regional/rural markettoo small to absorb the production of a single factory operating at a minimum plant size. Highly competitive market conditions with the entry of additional projects or difficulty to compete with existing enterprises enjoying entrenched market positions.
2. 3.
Expensive technical expertise or absence of adequate local skills. Importation of materials, machines and even skilled labour regulated by the government due to the amount of foreign exchange involved. Uncertainties in currency control, customs regulations and practices particularly with regards to their effect on costs and timing of delivery.
4.
Infrastructure, bad roads, lack of communications and electricity, etc. prohibit the establishment of industries in certain areas. Inflation that affect prices and cost to the extent that reliable calculations cannot be made. A banking system that may not be open to financial needs of the industry. Burdensome tax regulations, trade practices which require that the distribution channels and trade customs should be known in advance in order to arrive at realistic cost estimate. High minimum wage in the region or ar 3, restrictive plans, actions or measure of locel or regional government.
- 40 -
Exhibit
Answers to questions: Market area ppropriate selling price Efficient channels of distribution Immediate sales prospects Actual buyers Size, capacity, models, to be sold and how many? Prepare marketing program (price, product, advertising and promotion, channels of I distribution) f
Estimate your market share (consider quality, price, production cost, competitors and location) Estimate total market demand (relate productwith other economic indicators)Example, demand for shock absorbers dependent on car sales.
QUESTIONS - The foundation of a marketing plan. Market area Appropriate selling price Efficient channels of distribution Immediate sales prospects Actual buyers Size, capacity, models to be sold and how many.
- 41 -
2 Information
Type of Infomation
Available
Government publications like economic development plans, census on population and housing, etc. Registration data
Economic data on population and employment, basic data on economic indicators. Exports and imports Identifying customers and competition, their mailing address, telephone numbers, offices, etc. Price and cost data, current market conditions, competition, warehousing. Special market studies Exports, imports, trade practices, etc.
2.
3. 4. 5.
- 42 -
CLA!WFYlNG
TiiEMARKET
Before the market share is calculated, it is important that the market is defined since a product may serve only a portion of the whole market. The market is defined in terms of income levels, age and family size for canbumet~goa& and by type of users, by industry type, size and allocation for &z&U goa&. Thus, if you manufacture outer garments, the market has to be defined in terms of age categories (infant, children, adult), income levels (lower, middle or upperj, etc. The total demand, therefore,refers to the defined market, identified by specific characteristics and including segment(s) for which the product is most appropriate. Hence, a product has to be defined and suited to its target market segments through its distinct feature, quality or style. (See Exhibit 2j
ESTlMATZNG VEMANV An entrepreneur usually perceives a business opportunity when he sees a need for a certain product or service and he thinks that its target users have adequate purchasing power. Even if the demand -iscurrently met, the entrepreneur may foresee growth. Sooner or later, existing plant capacities may not be able to supply the growing demand; thus the entrepreneur decides to build a plant with theintention of capturing a portion of the unfilled demand. Available data trends in population growth, per capita income or per family income, income distribution and business activities are useful market indicators in determining demand for new products. MEASURTNG MARKET STZE
The total market size represents the total market demand for a product or service. In order to determine the total market size, one has to know the: - Geographical area - Town, municipality, regional or national, export or domestic markets.
Durable
Individuals
Consumers
Organizations Non-durable
Industrial
Middlemen
Government
- 44 -
- Identified target groups of consumers - Housewives, chemical industry, infants, etc. - Unit measurement and time period covered - Number of dozens, pounds, kilograms, per month, quarter or year. It would be easier to determine the total market if information on the past and future demand of the product is available from the trade associations or government you can estimate the total market by bureaux. If information is absent, establishing the relationship between the product under study and other items (variable) for which information is available. Thus, the demand for the following items can be derived from the indicators shown: Product Shock absorbers Garments Construction materials Indicator of Demand Car production/sales Population Volume of construct ion in hous ing or infrastructure
ESTMATING
In a competitive situation, a project will be able to capture only a portion of the total market demand. This is commonly known as the market share of the enterprise expressed as a percentage and in terms of monetary value. The market share can be quantified based largely on the analysis of available information. In determining your share of the market, consider product quality, pricing, strategy, production costs, competition, etc. Since this is sometimes difficult to determine, the entrepreneur, after a thorough assessment of his market potential may set his own sales target in terms of volume and amount for a certain period of time, considering technical as well as financial limitations. To strengthen his "feel" of market share, he can secure letters of intent to buy or endorsements of his product from reputable traders and consumers. Finally, as an alternative to determine the extent of market share and avoid unnecessary heavy investments, market tests may be conducted. This, however, must be well-planned, preferably with your small business adviser, to derive best results from instruments and as a sound basis for a decision to proceed with production. PRTCTNG Price is an important element in determining market demand and your firm's share of the market. Demand for consumer goods may be increased through price reductions, whereas a similar situation may not necessarily happen for industrial goods. It might be useful to determine the relationship between price and demand but the investment in time and money may not justify the effort.
- 45 -
For small and medium enterprises, it is necessary to determine current and historical prices of the product, competitors prices and price trends. From this information, a pricing scheme for the product(s) to be launched may be set which will be both competitive and profitable. SALES FURECASTT~G The @uL~? output of the market study is a sales forecast to include quantity and sales value for a given period of time. Two approaches are commonly used in making sales forecast.
This technique is based on intuitive reasoning and subiective evaluation. The result arrived at in this type of forecast may not be accurate inasmuch as the entrepreneur may not possess sufficient experience with or knowledge of a product. However, this technique is used in combination with the other mathematical approaches.
This technique is used only when historical (past) data for the product are available. Time series forecasting, one of the statistical methods, considers past and future demand of product as related to time rather than affected by price of the product and income changes of consumers. To illustrate this technique, a simple example is shown below: Demand for shock absorbers in 1976 Demand for shock absorbers in 1980 Average increase in five years Average annual increase The prcjected demand for the next three years &th as follows: 1981 1982 1983 8,000 plus 1,600 9,600 plirs 1,600 or or or 9,600 units 11,200 units 12,400 units 10,000 units 18,000 units 8,000 units 1,600 units the use of the above data is
- 46 -
TffEMARKETING PROGRAM The marketing plan must include the sales targets for a specified period of time as well as a commitment of resources for advertising and promotion and other selling costs to achieve the sales targets. To evaluate sales efforts, the sales plan should provide data on sales in terms of units, money values, by-product lines,geographical areas and quarterly targets. The budget for ~+;wI advertising and prom,,,,. which is necessary to support sales target provides for the costs of the media used. It will be useful to observe and study industry practices as far as the extent of expenditures on advertising and promotion in relation to sales is concerned. Other costs, such as sales commissions, distribution costs and packaging costs or costs that vary directly with the volume of sales, are calculated based on the target sales. Fixed expenses, such as salesmen's salaries, travelling and entertainment, are likewise budgeted. The sales plan which is the culmination of the market study is then used as the basis for the preparation of the manufacturing plan. From the Point of view of lenders, investors and other parties interested in Your Project, the marketing program can be strengthened with the information on possible marketing contracts with the government or identified sub-contractors in the industry, as well as written inquiries about your products or services from importers, traders and other large group of consumers. THE TECHNICAL STUDY
PRODUCT
DESCRTPTTON
An entrepreneur should define product specifications in terms of: 1. 2. 3. 4. Type and quality of materials required Form and structure of its components Form and structure of the final product with indications of quality level Operations/processes required to manufacture the product.
The entrepreneur, if nottechnically competent,needs a technical man who can perform the following casks: 1. 2. 3. 4. Choose appropriate raw materials Define the process and operations Select adequate equipment and machinery Specify the skills needed for production
- 47 -
To avoid the unnecessary costs of hiring consultants or permanent staff to carry out these functions during the planning stage, technical expertise may be sought' from the following sources: 1. 2. 3. 4. 5. Existing manufacturers in the domestic market or from abroad Ratrmaterial supplier Equipment manufacturer Industrial consultants Publications
Assuming that the appropriate manufacturing process information is available, the next step is to specify and quantify the facilities required by drawing up a process flow chart indicating the individual operations to be performed with specifications as to: 1. 2. 3. Type and capacity of machinery and equipment to be chosen Type and number of operators, and auxilliary personnel Type and quantity of raw materials, supplies and components to be used
Along with process selection, the option of sub-contracting a part or process to other industries have to be investigated since this may be economically and technically viable.
- 48 -
It is also advisable to determine expected bottlenecks in operations as well as suggest measures to overcome them especially with regard to machinery which is costly or difficult to obtain, maintain or operate; special skills required, and essential supplies.
the basis of manufacturing Finally, the factory design can be determaon requirements, type, size and preferred site of building. Some considerations in the selection of factory site include the definite period the factory can be . expected to work at normal level of output, possibility and requirement for expansion and its flexibility with respect to manufacturing of other products. PROVUCTZUIVFACTORS
Land and building are the primary fixed assets required in starting an enterprise. A schematic layout or general factory plan must be drawn up. The total area requirement for land and building, costs of construction as well as the price of. * .. land must be assessed. In selecting the plant site, tnc entrepreneur must consider the accessibility of the area to transport facilities, availability of utilities and other public services as well as legal limitations (safety pollution, etc.). The complement of machinery and equipment on the other hand, is based on the process selected. Its choice, however, will depend on the availability, performance,rharacteristics and capacity, purchase price, operating requirements and costs, and after-sales service by supplier. Ancillary installations and services have to be specified such as installation of utilities, storage and transport facilities, and other general factory outfits (benches, racks, etc.). It is advisable ,to consider the option to aquire these fixed assets through lease-purchase scheme. The major advantage of this alternative is it lessens the amount of financing required. Cost implications should be studied in whatever alternative the acquisition of equipment is made.
- 49 Munpowm Total manpower complement comprises the management, supervisory staff, technical staff, and skilled and unskilled labour. The entrepreneur must determine whether the specified labour force is available and at what costs. The production process chosen determines the skilled and unskilled labour required as well as the supervisory positions in the factory area. For the other positions, in management, it is necessary to draw up an organization chart to indicate the key function to be filled in production, marketing, Jccountingand finance and general services. There are two primary considerationsinplanning the labour complement: its availability and the adaptability of the workers to the job assigned. Supply of in a predominantly agricultural area is sometimes scarce industrial workers and it may be necessary to "import" workers with desired skills from another region. Keeping them on the job is another issue. In both cases, it may be costly to secure the required skills and keep the right man in the factory. For some jobs of more specialized nature, a comprehensive program for development of skills is necessary. Training is a safe alternative to hasten the adaptation of recruited labour to the specified jobs. It may be useful at this stage for the entrepreneur to make an inventory of existing training institutions in the region where his employees can be trained. It is wise to provide for a budget for the recruitment and training of manpower. Raw mcz-bia&
and auppfi~
These resources can be specified once the type and qudlity of the product to be produced have been determined. Some materials need detailed spec;fications as to quantity and costs in order to arrive at a reliable cost and profit calculation. Specifications of materials needed include quality and quantity required per period for each type, storability, transferability and seasonality of supply. If the raw materials and supplies are available, these should be available in the right quality and size, at an acceptable price, and in quantities and at intervals attuned to the need for continuity of supply. AS important as availability, the type of supplies of the rawmaterials and the suppliers must be known.' Prices and conditions of delivery as well as reputation of largeindustrial suppliers should be obtained, Other types of SUPplizrS have to be investigated .to find out if their facilities in terms Of knowhow, equipment and management are adequate. For small-scale ventures, suppliers usually are wholesalers, commission. agents, sales representatives and retailers. Regardless of the supply source, the aspect of service, delivery and payment conditions must be assessed. You have toconsider your purchasing policies inasmuch as this will have an effect on costs. Studv also availment of credit. discount and bulk ourchases.
- 50 -
If imported materials are required, you have to look into the existing import and currency restrictions of the country. Awareness of the factors that impede the regular flow of imported goods will be helpful. As a last consideration, you must take into account costs of transportation and keepinginventories. You have to transport materials, you must gather information on the means of transportation, its schedule and costs, as well as risks of damage and theft. Cost of keeping inventorie$ pertain to the cost of storage facilities, waste and deterioration, risk of damage, fire and theft, risk of price fluctuations, and cost of capital invested in stocks. Here, you must also define type of storage rooms and equipment.
FINANCIAL STUDY The complexity of the financial study dependslargely on the size ment involved. Before committing your resources and energy to a undoubtedly,need to know whether proportionate financial returns coming. In other words, you must be satisfied that your project acceptable level of commercial profitability. of the investproject, you are forthshows an
To illustrate clearly the process of preparing the financial feasibility study, let us look at the following example of a garment factory which we will call the "High Fashion Company" or HFC.* HFC manufactures ladies' blouses, men'sshorts and ladies'and men's pants. T/-/E SALES SWEQULE The sales plans of HFC as shown on the next page represents the output of market anal, ysis and is used as a basis in building up the financial information. Plans for succeeding years should also be estimated and presented on a similar basis:
- 51 High Fashion Company Sales Plan Price Dozen (US$) 36.16 25.12 22.94 26.78
Iterns Ladies' blouses Men's pants Ladies' pants Men's pants Total
The company has adopted a simple marketing strategy to generate the projected level of sales. Its produce will be marketed in an area with a total population of 500,000. The use of high speed sewing machines, highly trained labour force, and strict supervision will enable the company to sell quality garment at competitive price. The company shall undertake personal selling through presentation of samples to wholesalers in the area and participate in tr;lde exhibits and fairs as initial sales promotion activities. These promotional efforts are expected to cost 10% of total sales plus a Z-l/Z% commission to hired salespeople. A delivery vehicle shall be provided for. THE PR0DUCTTUN SCHEPULE The productionschedule can be devised tomeetthe sales plan with adequate information on the level offinished good. For HFC one month finished goods inventory is anticipated.
High Fashion Company Production Schedule Year Item Ladies' blouses Men's shirts Ladies' pants Men's pants Total 1 Dozen 900 900 900 900 .3,600
- 52 -
PRCUUCT70N COSTS
Direct materialsare costs or input which comprise the integral part of the finished product. Minor materials may be charged to supplies or indirect materials,rather than direct materials, because it is impractical to trace these items to a specific unit of product. In the case.of HFC, the direct material costs are estimated as follows: High Fashion Company Direct Materials Year 1 Use Garment 32" Yard Required 9,600 Total cost $ 19,680
Fabric Knitted fabric 72" wide 35% cotton 65% polyester blend Light denim Light denim
Cost/Yard 2.05
Total raw materials per year Raw material inventory fund (1 month)
From the direct materials used, raw material inventory requirement may now be determined. It is important t, determine inventory .level since: (1) it is n usually impossible to obtain delivery that exactly coincides with production needs; (2) savings can be obtained by purchasing economic lot quantities; and (3) it is sometimes desirable to hold stocks in anticipation of price increases.
- 53 -
All labour costs which are obviouslv related to and easily traceable to specific products such as labour of machine operators and assemblers, fall under this category. Other labour costs such as payroll for material handlers, janitors and plant security guard are considered as indirect labour because of the difficulty or impracticability of tracing such items to specific physic:' units. For HFC, we assume the following labour complement is necessary It 25 working days per month: High Fashion Company Labour Cost Schedule
Monthly Rate 1 6 2 1 1 1 Designer-pattern maker/cutter Straight-needle sewer Over lock stitch sewer Buttonholer and chainstock zeuer Presser and sacker Button sewer, inspector and trimmer Total
100
47.50 47.50 10 60 60
9AZi --we-
Related fringe benefits costs like those for social security, vacation al sick leaves, and bonuses may be estimated as a percentage of the total direct abour costs, in this case about 20% or $1,975.
Manu~actwuhg
Expendeb
To simplify cost classification, all other manufacturing costs that can neither be classified as direct materials nor direct labour may be included in the factory overhead. For HFC, the factory expenses may be classified as fol'i?ws:
- 54 -
= =
This item of cost consists of packaging materials, threads, zippers, computed as follows: Polybag Boxes Thread Zipper Buttons Total $ 345 576 133 864 347
etc.,
$ _2,2_65 -----
Although some of these items may be classified as part of direct materials, in this illustration it is assumed as part of factory supplies.
Based on the machinery and equipment used, depreciation cost may be computed on a straight-line basis. For HFC, the machinery and equipment with its corresponding costs are shown below: Quantity 1 5 1 : 1: : 153 Item $ Electric cloth cutting machine 7" Lockstitch single needle straight sewer $500 each Overlockstitch machine Button-holing machine Feedoff arm machine-two needle double stitch A/B steam iron Electric ceiling fan Work basket Cutting table 16" x 48" x 36" Bend - for storage of cutwork Small table for bundling Working tables Electrical works Tools and spare parts Total Depreciation (annually for 10 years) Maintenance (assumed at 5% of total) cost 1,120 3,000 1,573 2,029 1,284 288
- 55 -
From the information of KWH consumption of the machinery and equipment complement and lighting requirements, the electrical costs can be computed as follows : Per Month Per Annum
Gemand charge (Initial charges based on total HP of machines used) 11 machines (1.33 hp. each)
$ 39.06
$ 469
Energy charge (Rate based on actual energy used) 11 industrial machines (109.1 KWHlday) ?8 40W flourescent bulb KWH/day or 2,847.5 KWH/Month
Computation: 1000 KWH each at .05 = 50 1847.5 KWH each at .04 = 74 Annual energy consumption costs 124 1,488
$1,_957 --we-
There may be other costs aside from the ones previously mentioned and these costs should be included to avoid all understatement of costs. Other factory overhead costs for HFC are: Monthly Factory rental Factory insurance $ 53 27 $ Annual $ 636 324 2@
- 56 -
UNIT COST OF PRODUCT-TON From the financial information so far computed, the average unit cost of production can be computed as follows based on total production of 3,600 dozens: Annual Cost Direct material Direct labour Manufacturing overhead Indirect labour Factory supplies Depreciation Maintenance Utilities Rent Miscellaneous (10% of above) Sub-total Total production cost Average cost per dozen $ 56,193 9,875 2,316 2,265 1,059 530 1,957 636 909 $ 9,996 2.78 Ave. Unit Cost $ 15.81 2.74
Inasmuch as the product cost consists of direct material, direct labour, and overhead, the cost of finished product can now be computed as follows: Cost of finished goods: 300 dozens @ $21.33 = $6 399 =1-z=
GENERAL, SALES AND ADMINISTRATIVE COST To complete the cost structure in operating HFC, the cost related to administration and distribution are computed as follows:
- 57 -
Sczted Expense6 Promotion - 1% of sales Commission - 2-l/2% of sales Salaries and wages General-mana er '$ 2 Secretary-. ookkeeper Travelling expenses Organization expenses Office rental Telephone and telegraph Gas and oil Social security and fringe benefits Taxes and license Depreciation - office equipment Total operating expenses $ZOO/month $lSO/month 2,400 1,900 1,600 1 )coo 480 100 1,600 720 1,000 250 $ 883 1,103
TOTAL PRUJECT COST Finally,an estimate of the total project cost must be made. This is simply a statement that answers the question: "How much will it cost to start this business'? Watch out against either pitfall of understating or overestimating your project cost. If you understate your cost, you may later encounter difficulties in operating as planned. An overstatement, on the other hand, results in inefficient use of funds. The total project capital expenditure consists of the following: ,$ixed a&e.&, wahk.&g capLW and ohgan&mXon Fixed a~&, or fixed investments, of the project is the cost of land and improvements, buildings and site facilities and machinery, equipment and furnitures required by the enterprise. Included here are start-up losses, material charges, equipment installation cost, and all expenses necessary to prepare the land as an industrial site. If certain equipment have to be imported, the amount of foreign exchange needed should be specified. Sometimes it is advisable from a financing point of view to rent rather than to buy, land and building. This is also true of machinery and equipment that may be obtained on a lease or lease-purchase arrangement.
- 58 -
Wo&tn.g capm requirements need to be studied carefully inasmuch as the lack of it is a common cause of business failure. Working capital requirements of a new enterprise include the following: 1. Minimum cash balance for cash manufacturing, operating expenses and debt-service. 2. 3. 4. Inventories - Raw materials, finished goods and work-in process.. Trade account receivable Pre-paid expenses
For inventories, the level of working capital requirement will depend on turnover rates, seasonal influences, delivery lead time, uncertainties in delivery, high processing and commercial stock requirements. The amount of account receivable will der:endon the amount and terms of credit extended to customers and company's collection policy.
UhgavLization CO&~ are incurred in making preliminary investigations and organizing or forming the company. These include costs of preparing the project feasibility study, legal fees, expenses for obtaining financing, etc. Organization costs may be amortized over a five-year period.
Going back to our example, the project costs are: Fixed abbet: Land (leased) Building (leased) Machinery, equipment and installation Tools and spare parts Office equipment Total fixed asset
$ $
wohking
capixd
Account receivable (one month) Minimum cash balance (expenses for one month) Payroll Manufacturing expenses Operating expenses Raw materials inventory Finished goods inventory Total working capital $ 822 745 1,007
7,356
- 59 -
OhganLza.-tion cob.32
Total
profit costs
SOURCES OF FINANCING Once the total project cost has been estimated, the next step is to determine your financing needs and to look for sources of financing. As a small entrepreneur, chances are you cannot provide all the funds that you need. You must then look to external sources - notably government financial institutions and commercial banks. In many developing countries, there are special credit schemes for small industries offering easier terms and conditions. In making an industrial loan, be sure to consider debt-equity requirements, interest and financing charges, mode of payment, collateral requirements and term of loan, before deciding to apply for credit financing.
PRO-FORMA STATEMENTS From the information compiled so far for HFC, the pro-forma or projected statements can be constructed. There are three basic pro-forma statements, namely:
Pho-coma phOt%t
and Cobb
batm%meti
This forecast shows the profitability of the project at a certain volume of production. The net profit figure will interest both owners and creditors since any residual amount is distributed partly as dividends and partly for debt-service. Shown on the following page is the profit and loss statement of HFC for the first year of operation.
88,276
Direct material useu Direct Vabour Factory overhead Total cost of goods manufactured Add: Finished goods, beginning inventory Less: Finished goods, ending inventory
6,399 $
ho-&Mm&
cabh
@OW
b&&men-t
You will, of course, be interested in the cash generation capacity of the proposed venture. You will want to find out the amount of cash necessary to start the enterprise and how soon it can be recovered. On the other hdnd, creditors in general, will want to see the liquidity picture of the enterprise in the long run. Sources and uses of cash are the primary features of a cash flow statement, with the bottom line figure showing the cumulative cash balances. Shown in the succeeding page is the cash flow statement of HFC. Please take note that the list of cash inflow and outflow is by no means complete.
- 61 High Fashion Company Cash Flow Statement Pre-operating Period Estimated cash inflow Loan - long term Cash sales Equity contribution (assuming 20% of project cost) Collection of accounts receivable (1 month) Total estimated cash inflow Less: Estimated cash outflow $ 35,166 8 80,920 7,033 $ 28,133 80,920
Organization expense Fixed asset acquisition Purchases of raw materials Payroll Manufacturing expenses (net of depreclatisn) Operating expenses (net of deprec!ation and excluding organization expense) Total estimated ca-,houtflow Net cash flow Add: Cash balance beginning
1,000
13,094 56,518 9,875 8,937 11,086 14,094 21,072 21,072 $ &p~g $ x,m vL---86,416
- 62 -
Pm -@ma
balance 4 beet
The balance sheet contains the statement of resources of the proposed venture at a given period of time. Assets, liabilities and equities are detailed in this statement. HFC has the following pro-forma balance sheet for its first year of operation.
High Fashion Company Balance Sheet ASSETS Current Assets Cash Accounts receivable Raw material inventory Finished goods inventory Total Current Assets Fixed assets Less Depreciation Total Assets $ 15,576 7,356 4,743 6,399 + 33,074 13,094 1,309
LIABILITIES Long term loan Accounts payable Capital Net income Total Liabilitks Total Liabilities and Capital
y;;
7:033 5,555 12,588
- 63 =.
It is important to realize that in preparing financial statements, there are conditions which cannot be pre-determined with certainty. In constructing the pro-forma statements, you should always state your assumptions based on your experiences. Assumptions are statements about future business conditions that affect the outcome of financial operations. For HFC, the assumptions are as follows: 1. 2. Long-term loss represents 80% of the total project cost of $35,166, Equity represents20% of the total. Cash sales is assumed to be equivalent to 11 month sales. Accountsreceivable then represent about one month of the annual sales. Accountspayable 7s assumed to be at one month of raw material requirement or 30 days. All other expenses are to be paid for in cash.
3. 4.
There are other future financial conditions which should be stated for the benefit of the third party (lender, venture capitalist , etc.) to enable him to understand the project plan. ESCALATZON RATES For our example, the HFC, we made financial pro,jectionsfor only one year. Project plans require a period longer than one year at least, a period long enough to show full amortization of debt, if long-term obligation is contracted. In continuing the first year projection to the desired number of years9 some cost factors would rise in direct proportion to sales. We call these variable costs. Other costs,and these would remainstatic,are known as fixed costs. Regardless of the nature of costs, the inflation factor !:!,ould be considered in making the projection of future periods. The inflation factor may be used in the escalation rate in extending costs to future periods. FZNANCIAL EVALUATZ0N One of the criteria in judging the feasibility of a project is that the financial prospects and risks are acceptable to all those who will invest in the project. To determine that this criterion is attained, the results of the financial study must be analyzed in terms of liquidity, profitability and stability factors.
- 64 Financial ratios which show the relationship between various items or groups of items on the balance sheet and income statement will provide information regarding the competitiveness of the project with similar business establishments. Tests of liquidity, profitability and stability are derived from the pro-forma statements. On the other hand, it is also useful to determine the sensitivi,tyof the project's profit to changes in cost, production volume or price. The technique utilized in this case is break-even analysis. The minimum level of sales to keep the business going is determined through the use of this analysis. Chapter VIII on "How to Analyze your Small Enterprise" will provide you with the mechanics of these evaluation techniques.
- 65 -
ORGANIZING
A BUSINESS
So you have completed your project plans. As a result, you are convinced, more than ever, that you have a viable project that will not only satisfy your creative drive but will give you financial returns as well. Well, then, you are now ready to translate your plans into a "live':pulsating enterprise. In other words, you are about to organize your business. Organization involves choice of appropriate legal form of business, finding a suitable location, hiring and training of personnel, deciding the financial package and other legal aspects of starting the business. CHOOSING THE LEGAL FORM
The governments of developinq countries provide several organizational alternatives or legal forms. .From these, you may select the one that can best meet the needs of your business. It is advisable, however, to consult a lawyer before embarking on a decision as to legal form of organization. The major factors that are considered include tax implications, integrity of partners and extent of personal liability. Shown below are the three most common forms of business organizations.l/ SOLE PROPRlEJORWZP One person is sole owner. Unlimited personal liability for business debts. Termination upon death of owner. Relative freedom from government control. Generally, no income tax on business;only on owner. PARTNERSHP Two or more persons are owners. Partner'srights and duties defined by partnership agreement. At least one partner must have unlimited liability for debts of the firm.* Capacity of partner to bind others when acting within the scope of business. No income tax on partnership itself.
- 66 -
CURPURAJTON Stockholders are owners who are distinct and separate from the corporation. Continuity unaffected by debt or transfer of stock shares. Subjected to more government control than a sole proprietorship or partnership. Income tax on corporate profits and on dividends after they are paid to . stockholders "21 The choice of legal forms will depend mainly on your resources and experience as well as the size of investment. A single proprietorship is advisable if an entrepreneur has sufficent resources and technical expertise to run the business singlehandedly. Otherwise, a partnership or corporate form may be considered.
CHOOSING
THE
LOCATION
OF BUSINESS
As you know by now, the technical plan identifies the plant site or business location. In deciding where to locate, consider factors that enhance the viability of the project such as proximity to market, materials availability, availability of transportation and power, etc. Before a final decision is made, however, you must take into account the legal aspects of acquiring the property. In some countries, the ownership and possession of land is highly regulated. Therefore, you will do well to study laws and regulations affecting the transfer and use of land. Pollution laws and regulations and zoning requirements in particular must be studied and complied with. of?GAN1z1NGM4Npowui Your project plan specifies the expertise needed in terms of administration, sales and production personnel. Based on these specifications, you need to develop a strategy for the recruitment of the staff. A small business usually makes use of referrals. In the case of an expansion project, referral from the present work force is advantageous and less costly to recruit. Friends and associates and even family members can suggest sources of manpower. A more formal recruitment procedure through placement or employment agencies may be a little bit more costly. Publication of manpower needs in tb.~classified ads of widely-circulating newspapers is also an effective means .F' recruiting major personnel complement. Getting the most out of manpower resources requires careful attention to their needs. Every worker must be oriented to the responsibilities of the job. If he is involved in a highly technical job, he should undergo formal training. New personnel must be given time and opportunity to adjust to job routine. Just and fair dealing with the work force, will enable you to derive the utmost benefit from your manpower complement. * Under Philippine law. / Ibid.
- 67 -
DETERMINING
THE
FINANCING
PACKAGE
A business plan is an important document to use in raising the required funds for the project. At this ooint, you must have several financing alternatives. It is necessary to evaluate these sources before a decision is made to obtain external funding. To ensure stability of business operation, a business must have adequate equity investment. Heavy reliance on borrowed capital, although advisable in projects with substantial cost requirement and highly profitable lines, may not be wise for a starting entrepreneur. Costly interest charges will exact pressure on the firm to operate at a high level of capacity which may not be possible for a starting business. In deciding the appropriate financing package, you will be guided by the following questions: 1. What is the repayment period? Does it provide for a grace period on principal amortization or a longer period for the financing of capital requirements? 2. What is the interest rate and financing charges?
3. How is the #fundreleased? Does the bank require a corresponding equity inflow for every amount of loan released? 5. How will you amortize the loan - monthly, quarterly, semi-annually or annually? 6. What are the restrictions imposed by the financing institutions on the loan package? Can you comply with these restrictions?
REGISTERING
THE
BUSINESS
In all countries, a business has to be registered with the local as well as the national government agencies. The number and nature of licenses fo ho secured and the costs involved have to be pre-determined to avoid legal problems arising out of non-compliance. For some industries, compliance with poliut'on protection regulations is a requirement for registration. Taxes to be paid and books of accounts required must be settled before starting a business. Be sure to maintain a complete file of the business documents which may be required by the government regulatory bodies. This will be useful when you apply for government incentives. It is advisable to engage the services of anaccountantand a lawyer on these aspects to avoid unnecessary delay and legal complications later.
--68
CHAPTER
IV
MANAGINGTHE ENTERPRISE
Mnagement cobzt3.0~ invoh35 p.tanm , olrganiz.hg ftuman and mat~hedouhceb
objective.
, coo/rdinat;ing
-43 o&en20
an .&i&died
and achieve
Managing a ma& buineu hcYp.iked not on.iZy an wuh&and.ing 04 managemevtt techniqueb, ad genehaeey prrac$i~ed, bti &a an ap)xU~on 06 size-h&&d dk&?IWEu in mavuqement inhmw.t in dma?Lnedb, no.tabLy phaticeb . Chdtiti~b tie ceMza;tien 06 au.thokLty on one man -- the etiephene, giveb tie Ito ~pec.ia.t ptlob.te.mt in ama&? bubintibn The Ama. uuhepkeneuh can ovehcome ;thtie management. ptobikm by dew&ping and acquhhg management bfzLt& appt0phia.Q to a bmatt Qitm. Tkcb chap&~ ticudded thebe managemen Aki..&, tuuw.Ly: tienti~y~ oppoh.tuvLities , pkknvuhg , ohganizing , cow3toU.Lng and decihon-making . The maU e.n&epmneu~ mtit pa&LcuRatLey conctxn hi.m~eR,( with managing human hC5OuhCeb. Tti chap&x phovideb pe.actLcat tip on puuonnct kiting and beletion, dev~opment and motivat.ion. The er&eptlenem .A a&o urged .to develop human hcL.&donh /.techniques .
After you have carefully identified, planned and organized your project, then you are ready to implement it. As you are both entrepreneur and p'jnager,you must be aware of the principles and practices that will help you (nage your small enterprise effectively.
WHAT
IS FlANAGING?
The success of a business largely depends on its management. The goals of an enterprise can only be achieved if it has a capable and effective manager to lead it towards desired goals to attain. You, tot, can be a good manager and steer your business to success. Would you like to acquire, develop and enhance your management skills? Obviously, the first step would be to understand the concept of management. Essentially, management is a distinct process of planning, organizing, conducting and controlling resources- both human and material-to achieve an identified objective. The practice of management involves the use and development of specific skills, namely: result.
1.
Pihwing
. The determination of a course of action to achieve the desired Planning is largely a mental activity; a process of thinking before
- 69 doing. Planning requires imagination, foresight and judgment and includes such activities as the identification and evaluation of business opportunities and hazards, determination of the course of action to be adopted to achieve maximum profit or effectiveness, the establishment of policies and continuous seeking of new and better ways of doing things. 2. Uhganizing . As manager, you must develop an organization capable of accomplishing your objectives. "Organization' here refers to the structure which results from identifying and grouping work, defining and delegating responsibility and authority and establishing relationships. 3. coohd-t37ahg. You must coordinate the activities of the enterprise by balancing, timing and integrating them with each other. Balancing means apportioning human and material resources such that each type of resources supports or counterbalance the others. Timing requires that different activities, proceeding under their own schedules, are paced in such a way that they advance while reinforcing one another. Integration involves establishing relationships among the diverse activities which must be brought together to accomplish work effectively.
4. Mo;tivating. In motivating your workers to become increasingly productive, you must remember that people are special in every organization. Do not take your people for granted for they can make or unmake your organization. Dutstanding people can make even a poor organization operate successfully, while poorly-motivated people can impair the performance of the soundest organization. 5. cotlakaag. In management, control means to guide something in the direction it is intended to go. Work must be carried out in terms of certain performance standards which, most commonly, are based on the objectives, policies, programs and procedures and budgets established initially to guide the work. The concept of enterprise management can be viewed in a nutshell from Exhibit 1. It shows the manager's functions, the resources for management and the publics towards which the manager has definite responsibilities.
Exhibit
So you are now an employer. If you are an entrepreneur who has been used to working alone, you will find that hiring one or more employees will exact new demands on your capabilities. What usually follows is an "evolution" of nsw, more challenging entrepreneurial activities, like: Undoubtedly, you have what is commonly known as initiative. leadc.&Cp. Otherwise, you wouldn't have taken the steps that have led you to start your own small business. Today, with several employees under your responsibility simple initiative is not enough. Initiative will have to grow out to become leadership so that you can lead your people toward your desired goals. Training occurs when you find it necessary to transfer PubsontwL management. at least part of your knowledge to your employees. Soon, aside from the activities that require your personal attention, you will have to look after your personnel. These activities bring about a new entrepreneurial responsibilitypersonnel management. Itim& and cx.XtiVrae treeatio~n. Basic human relat ions, which you probab possess in good measure, sooner or later must evolve to become internal and external (public) relations. THE NATURE 0F A SMALL BUS'ZNESS How, then, should you as entrepreneur, run your business so that maximum effectiveness can be attained? To answer this question let us first define a small enterprise. It is important to realize that, because of its size and unique operating characteristics, a small firm requires a management system or approach which is different from that of a large enterprise. Any attempt, however, at a precise and exact answer to this question, would be a futile exercise. There is no standard definition that could possibly include the diversity and variety of small firms. The concept of small industry is variously understood in different countries depending on economic and social conditions prevailing in a particular country. Often, the definition is based on two criteria, namely: 1. !&arxXtative, which includes size of company in terms of number of workers, consumption of energy, capitalization or value of sales. 2. Qualitative, which refers to the organization and management of th? enterprise, methods of production'or influence on the market. In Bangladesh, the definition of small industries has undergone several changes for the past 20 years. While in the fifties the defini",' c of small industries was confined to investment of maximum TK. 2.50 lacs (US $16,500) in fixed assets, the ceiling was raised to TK. 5.00 lacs (US $33,000) in the early part of the sixties. Subsequently, the ceiling was raised again to TK. 10.00 lacs (US $ 66,000) excluding the value of land. Presently, small industries in Bangladesh have a total investment ceiling of TK. 25.00 lacs (US $165,000).
- 72 -
An Indonesian small firm is one with an investment of less than Rp 70 million (US $112,000) for machinery and equipment. Malaysia's small firms are characterised as those whose owner-managers make most of the management decision in the absence of specialists in their staff. Having fixed assets of M $300,000 (US $13,135) or less, a Malaysian small firm employs less than 24 workers. Similarly, in the Philippines, a small enterprise is one whose owner-manager is not actively engaged in production but performs the varied range of tasks involved in guidance and leadership without the help of specialized staff. Quantitatively, jpcc 7Wt ,,I lx,;, 3 it employs IniS tf;;;I2. !311'1 i-t tota: 1 ing not I I .V* .___ +han hY.4 ~.mv.l/aw.- and has assets w,,UII less than 8100,000 (approximately US $13,000) and not more than Bl million (us $130,000). In its early year's of industrialization, Singapore defined a small industry as a business venture which employed less than 50 workers with investment in machinery and equipment of less than S $250,000 (US $120,500). Today, under the governmentsponsored small industries finance scheme, a small industry is defined as one having not more than S $2 million in fixed productive assets, i.e., fact0r.y buildings, machinery and equipment and loose tools for production. Industries with an investment on fixed assets (land, building, machinery and equipment) up to Rs. Z,OOO,OOO (US $110,000) in which investment on machinery and equipment does not exceed Rs. l,OOO,OOO (US $55,000) are treated as small and medium industries in Sri Lanka. In Thailand, an industrial enterprise is considered small if it uses mechanical or motive power, employs not more than 50 workers and has a capitalization of less than two million baht (US $99,500).
As can be gathered, quantita~Live indicators seem to be the more variable or fiexible criteria in defining a small firm. Indeed, these indicators are only supplementary to the more stable qualitative characteristics that make a small firm and its problems significantly different from those of a large one. Hence, regardless of the varying definitions adopted by different countries, the following qualitative criteria appear to be common among small enterprises everywhere:
The equity of small firms is generally owned by one or very few persons. They tend to be managed directly by their owner or owners. Small firm omer-managers have a high degree of independence in the sense that they have ultimate authority and control over the business.
Small firms usually serve a local or regional market rather than a national or international market, They also tend to have a very limited share of a given market.
Small firms are generally managed in a personalized fashion. Their managers tend to know all the employees personally. They participate in all aspects of managing the business and there is generally no sharing of the decision-making process. These attributes give rise to most of the problems and special needs that small firms have to cope with. They are also the factors which determine most of the management differences between small and large businesses.
COMMON
PROBLEMS
OF THE
ENTREPRENEUR
AS MANAGER
Many of the basic problems of organization, production, marketing, finance .and personnel relations are shared by managers in all countries. These problems, however, have always been misunderstood as resulting from lack of financing and not from the absence of appropriate management systems. A common misconception is that bigger companies succeed because funds are always available to spend for managerial know-how. This implies that the only difference between a large and a small firm is the financial situation and that management problems can be solved by the mere presence of money to operate the business.
Is money, then, or the lack of it, the most serious problem of the small entrepreneur? Studies show otherwise. Researches on small enterprises reveal that inadequate management know-how, rather than too little funds, lie at the root of the small firm's difficulties.
A survey-backed management briefing conducted by the American Management Association points out the need for proportionate ways of managing industries in accordance to size. It makes the following conclusions:
1. Small businesses require for survival not only good understanding of management techniques as generally practised but also thorough knowledge of sizerelated differences in management practices.
- 74 2. Exploitation of size-related opportunities is as important to the small company as is the development of product advantages or operating efficiencies. Countless executives who have transferred from a small company to a large one have had to learn these lessons. The observations and studies made on small companies in countries like Indonesia, Malaysia, the Philippines and Thailand reveal the following conditions existing in the small firms which are invehs@ related to their success: 1. Adequate records are absent. This leads to a situation where the entrepreneur-manager direly lacks the information required to make sound decisions and direct the company's future activities. Another consequence is that financial statements are usually worked out either for income tax purposes or for financing institutions in cases of loan applications. 2. Although undercapitalization may be an apparent feature, the lack of financial management is usually the cause of shortage of funds. Money is commonly tied up in fixed assets, thus depriving the operations of liquid funds to use as working capital. 3. Organizational set-ups are usually floating in the sense that responsibilities are given to people as needs come up, with control and administration centralized on the entrepreneur-manager. It follows also that the continuity of management is not provided for. Many entrepreneurs are concerned that no one could be entrusted with the responsibility of helping him manage the company, partly or wholly. Because management is centralized on one man, control and direction become limited to the extent that entrepreneur has the time and capability to cover the different functional areas of management. As a result, management is confined to dealing with day-to-day problems at the expense of planning and real control. 4. Tied up with organizational deficiency is an inadequate system of internal administrati.onwheyin .,Ic!lch iyportant 2: t3a$, p?,-j:i~,~ crhcvi~~l inn inn iis L. _,.--.. WI. J, inventory ..*.L iUiil .:** control, quality control, and cost control are overlooked in the management of the business. This production or operational ove;*sightmay lead to dire consequences: a disproportionate amount of funds tied up in inventories-from raw materials to finished products; delivery schedules unmet; and accounts payable unpaid. Materials consumption and costing are estimated by guessing which may result to over-or undervaluing and in competitiveness problems. All these place a heavy burden on the financial position of the small enterprise. 5. The undue centralization of administration responsibility also impairs efficiency of production operations. ldorkers are left to learn a job on their own either by observing old workers or through a haphazard training system assigned to a more experienced worker. The absence of a training program results in poor productivity. Production operations are not improved as time passes because work performance is hardly measured in terms of setstandards. 6. Recruitment standards and procedures vary as job openings come up. The company then gets stuck very often with drifting jobless people or those recommended by relatives or friends who may not necessarily be qualified or trainable people.
- 75 7. Marketing activities are limited to a "copy-cat" system whereby an entrepreneur "waits and sees" what the competitor will do that he can simply imitate . There is practically no development and research; products are all too often copies of similar items seen elsewhere. Sales achievements are largely a "hit or miss" in the absence of systematic market analysis and forecasting. 8. Decision making is very seldom made from an assessment of prevailing situations but is done more on "hunch" or "feel".
9. Even if financial problems may be overcome through borrowings, the entrepreneur lacks managerial competence to use the money wisely for the attainment of company goals. And realizing his lack, -he is not inclined to avail of competent professional assistance mainly because he does not have confidence in the capability of an "outsider." Moreoveri he may not want to trust a "stranger" with his "business secrets." 10. The business was started with the shortsighted view that the success of another can be repeated. That is, the entrepreneur was encouraged to enter a particular business simply because someone else before him did-and made it. Unfortunately, there is no assurance that he can score the same success unless he can combine the "right ingredients" as his predecessor apparently had. OVERCOMING MANAGEMENT PROBLEMS IN THE SMALL ENTERPRISE
The foregoing conditions comprise the factors that generally contribute to the failure of a small firm. Hence, it is apparent that managerial competence plays a major role in the success of a small entrepreneur. It becomes imperative, therefore, for you to develop the skills which will enable you to cope with small business management problems and improve the effectiveness of your firm. However, before you can develop and acquire the management skills appropriate for small firms, it is important to recognize and accept the fact that muvzag.ing different from apWng. is As you think of all the business in
- 76 -
town-manutacturing, wholesaling, retailing and the various services-you will see that each one is different from the others. However, these differences are all in the area of operations, which include five activities: buying or making (if the business is in manufacturing), pricing, selling, paying and pleasing. All successful businesses practise the same management principles, don 't they? is physical while Where, then, is the distinction? First of ali, ap&ng tnamging is mental. And managing is for tomorrow while ap&ng is for today or yesterday. There are certain very important skills which you can use in managing your business successfully. They are ~cti~y-ing oppon;turzi/i;i~, pbnning, orrgatizing;me.ahting and improving and de&ion-making. IDENTZFYZNG UPPORTUN7fIES The entrepreneur does this by taking a few minutes each day to take a look ahead, asking himself these questions: 1. 2. 3. How many people will live in this place five to ten years from now? What product or service could I provide? What will it be worth to them?
The place is growing. You are in a growing business. If you look forward you see more uses, more users. The first thing you must develop is the ability to look forward. With the people getting better educated, they will want and can afford to buy more things. The trick is for you to look ahead and be first to offer the consumer goods he may want or wish. You must then be inclined to act on the new opportunities. When you look ahead, today's prices appear as bargains. Conversely, when you look back, today's prices seem high. Then you would wish for the good old days and do nothing.
PLANNING
When you look ahead and do nothing about it, you are merely dreaming. Managing is planning. You must set a goal and list down the steps to reach that goal on time. The man with the plan has more chance for success than another who does business on a day-to-day basis. In small firms, lack of effective planning and its negative consequences are a major problem area. To remedy this you must:
1. Understand the specific causes for the limited planning generally found in small firms.
2. Be convinced that formal planning is worthwhile and a basic pre-requisite for successful operations. 3. Develop an awareness of planning methods that are suitable for small business situations. In developing a formal planning system in a small firm, the first step that must be taken is to analyze the forces that are of critical importance for achieving success. This would involve the following key processes&
1. Resource analysis. It involves the evaluation of the firm's strengths and limitations in marketing, production, finance managemen.t and personnel facilities.
2. Environmental analysis. This consists of the evaluation of external conditions and trends such as aggregate economic developments, technological changes, governmental regulations and social trends. 3. Analysis of competition. This means the comparative analysis of a firm's strengths and weaknesses in relation to its major competitors. Having analyzed the significant factors, the entrepreneur should next specify Iiisorganizational objectives, which may be in the form of sales volume, growth of earnings, return on investments, market share or new product development.
Matigenleti.
- 78 The analyses will likewise bring about an awareness of the firm's opportunities and risks. Ultimately, the above courses of action will help the small manager determine the appropriate strategies and tactics to use in order to achieve desired objectives economically. How $0 p&n Small entrepreneurs often make crisis on last-minute decisions. They are forced to do this because they are always pressed for time. You should therefore, begin making plans- step-by-step and day-by-day schedules. Everything works more smoothly and more profitably if there are plans. In planning you have to:
1.
2. Make the basic assumptions to be used in drawing up the plan. assumptions to be made are in respect to the following:
. Non-controllable conditions - What is expected to happen with regard to conditions which the firm cannot control such as population growth, future price levels and business cycles?
. Semi-controllable conditions - What assumptions should be made concerning conditions which the firm cannot control but can influence their happening to a greater degree(such as the share of the target market, the company's pryce policy and employee efficiency and turnover)?
- 79 . Controllable conditions - What assumptions should be made regarding policy matters which management can decide largely for itself (such as, whether to expand into new markets, new product development, and selection of a new site for the firm's location)?
3. 4. 5. 6.
Search for and examine alternative courses of action. Evaluate alternative courses of action. Select the best course of action and adopt plan. Proceed on the same basis to carry out the major overall plan.
ORGANIZING This skills requires the entrepreneur to have the ability to "carry people with him to put the project over." There are several kinds of people: those who know matrketd, those who know money, those who know men, those who know m&o&, and those who know m&w. The head of any business must pull these five M's together. He assembles them, then unite them into a team, then lead them to win.
It is generally accepted that to be effective the structure and internal functioning of an organization must be compatible with the demands of the organization's tasks, the technologies that are used, and the relevant conditions of the external environment. Practically every enterprise has its unique operating characteristics and environmental conditions. This may cast doubt on the validity of the universal principles of organization. Yet there is evidence that effective organizations show certain common features. The small business entrepreneur-manager should use these guidelines in organizing any endeavour.
3. "Human" use of human beings
A good organization integrates the requirements of the work with the desires and capabilities of its people. Recent literature on organization stresses two theories of organizational approach. One is the wuhb-cen&ed approach to organization design and which views the organization as structured around the tasks to be performed. The other defines a people-cen.txed set of values. It stresses the intrinsic needs of employees and the human relations aspects of management. An effective organization, however, results from a balanced approach that takes into account the requirements of work as well as the desires of employees for harmonious , satisfactory interpersonal relationships on the job. 2. Appropriate departmentation
This refers to the particular groupings of functi!lnsor activities in the organization, showing their relationships and the people doing them. The groupings establish the logical arrangement of the functions and activities into levels in the organizational structure, thus facilitating the assignment of personnel according to their capabilities, skills and motivations.
- 80 -
3.
Unity of command
authority
Each unit in the organization should have only one leader with corresponding and responsiblity to coordinate and control the activities of such unit as well as the workers there. A worker must have only one direct boss or supervisor to avoid confusion, irresponsibility and inefficiency due to conflicting orders. 4. Balance of authority and responsibility
Authority is the right to act or to direct the actions of others in order to achieve specific results. To effectively carry out assigned tasks, responsibility requires commensurate authority. An individual assigned to get others to do a job must have enough means to carry out the task. The imbalance of responsibility and authority results in chaos, buck-passing and other organizational conflicts that cause inefficiency. 5. Proper degree of delegation
There is an appropriate place in the organization for every task that must be performed. Management should not burden itself with tasks that can be performed effectively at a lower level in the organizational hierarchy. To obtain the greatest benefit from a sound organizational structure it is necessary to delegate tasks as far down in the organization as possible. As previously mentioned, small entrepreneurs are generally averse to delegating authority to their subordinates although they expect the latter to do all tasks assigned to. them that require authority. This is partly due to a misconception of what delegated authority means. For authority can never be delegated-it can only be sha/red. Delegating authority does not mean surrendering it. The entrepreneur-manager delegates just enough authority for the subordinate to carry out his given task. 6. Proper span of control
This refers to the number of subordinates directly accountable to and effectively managed by a manager or supervisor, Because there is a limitation to the human capacity for attending to and supervising different activities and workers, the number of subordinates over which an executive has direct responsibility should be just enough for him to carry out his tasks effectively. The larger the number reporting to an executive directly, the less attention he can give to each subordinate. Studies show that usually about four to eight workers are just enough for a supervisor to handle, although in actual practtce, the number is flexible depending upon the following factors: a. b.
C.
Ability and experience of the supervisor. Training and skill of the subordinate.
Nature of the tasks, whether diversified, highly technical, complicated, routinary or repetitive.
- 81 A supervisor can hand1e many workers when: a. The job is simple. supervision. b.
C.
Jobs
The workers are doing similar work. The work is repetitive in nature. The workers are located close together.
d.
Small companies tend to have a broader span of control than large companies primarily because small firms cannot afford the costs of additional organizational layers that go with reduced spans of control. A broad span of control combined with insufficient delegation creates a heavy work load for many small business managers, which in turn is the cause of ,poor decisions, lack of planning and weak control of subordinates which may reduce work efficiency.
~esign.ing
the
organization
~7~~ctwLe
Four basic forms may be used in designing an organization structure: a L&e -&th.uclthe, fine and &tad6 4;tpuLcfwLe, or a @w.i%onaL bti&te. a
1. The L&e orrgatiza.t.Lon is the typical form for a small enterprise. It is a set-up in which each manager has clearly defined area of responsibility and is accountable to only one supervisor. Each individual is given complete charge of the work assigned to him, subject only to the authority of the superior to whom he reports. (See Exhibit 2).
Small enterprises generally adopt the line type of organization structure because of its simplicity and efficiency. Decisions are quickly reached and it lends itself to a mlrimum of "buck passing". It also tends to develop versatile, well-rounded executives, since they are expected to be familiar with all the duties and functions of their particular organization, department or unit. It has its disadvantages, though. Although the vesting of final authority and responsibility in the hands of a single individual has real advantage especially if that person is highly capable, concentration of power tends to develop in the executive, the feeling of self-righteousness in all his decisions and makes him think he alone can do the job. Moreover, in the line form of organization authority is too highly centralized. Thus, nobody else can decide and act on problems if the chief executive is away. { The line anti.&a~d olrganiztion has the features of the line type but allows the use of expertise of staff specialists. These specialists can assist the line managers'to perform their varied functions without increasing the number of decision-making centres in the organization.
2.
Each person reports to only one supervisor, yet receives specializcd services and help from various experts. As adviser to line officials, a staff officer plans, advises , suggests and assists them, bul the execution is left to the line
Exhibit Line
Organization
OWNER-MANAGER
>.
-2
MARKETING MANAGER
PRODUCTION
MANAGER
I_
: SUPERVISOR
5-BOOKKEEPER
I
COMMISSIONED SALESMEN
MANUAL
WORKERS
- 83 officials themselves. One disadvantage in this type of organization is that oftentimes, staff specialists overstep the bounds of their authority and force their suggestions and services upon others. 3. The @n&Lo& in each unit. ohgatizalion emphasizes the functions or the kinds of activity
The worker reports to several supervisors, the number depending on the nature of his work or activity. Each supervisor to whom the worker reports is a specialist ina particularline orjob in which the worker may have a problem. However, although management is strengthened and operates efficiently because functi'ons are grouped according to their specialized nature , a problem that tends to arise in this type of organization is that the experts who seemingly have "equal" authority cannot work together smoothly. Furthermore, despite the apparent clarity on paper in the lines drawn from a particular subordinate to his several superiors, it is not always easy to determine which specialists to turn to when in need of guidance. CONTROLLZNG AND TMPROVTNG The controlling function of the manager involves the following activities:
1. The tiZubk%hmeti 06 &andan& 06 accotibX.Lty. The manager sees to it that there are valid, understandable and acceptable gauges for measuring work as it is carried out. These standards are based on the plans established to initiate the work. 2. Measwrement 06 wodz in pkogtess . Record of work must be kept as it progresses so that performance can be compared to the applicable yardstick. Measurement may be in terms of money spent, units expended, customers contacted, activities completed, etc. Accurate reporting to the work accomplished is also a requirement for effective measurement.
3. App-lXcatian 06 convective rneuuhu. When deviations from objectives occur, it is necessary 'to bring the work back to the desired course. The manager himself must decide what is required to achieve the expected results.
- 84 Measuring here refers to the procedure used to assure that performance conforms to plan. One of your greatestfearsas entrepreneur or top man is that you may not be in control - that you do not know what is going on. Certainly, you must design a control system which will tell you whether company operations are on course, and. if not, what is being done about it. It is obvious that decentralization of decision-making is impossible without a system of controls. One of the major purposes of a good control system is to ensure that decision making can be delegated. This points to an important definition of what control is not.Control does not mean that the top man makes the decision himself; it means that decisions are made at the right level at the right time. A good system of control provides for a regular and continuing review of every function in the company, based on the following questions. 1. 2. 3. 4. Where is the company now? Where did management say it would be? What are the reasons for the difference? What does management intend to do about it?
This brings us to another difficult task; to make changes, no matter how painful. The entrepreneur-manager should really look ahead, out and around. He should take time to analyze and find out how others do things better. Progress is certain if he is willing to improve. VEClSZ0N-MAKlNG BY 7'tfE ENTREPRENEUR-MANAGER Poor decisions are usually the result of poor information. Without accurate and timely information, guess work is done as a poor substitute to decision making. This is usually the case in small business management. In order to make sound decisions, therefore, you need adequate, accurate and valid information. Intelligent decis;r?-scan rarely be reached in a random, haphazard way. A competent manager can be distinguished by the way he approaches and solves his problems. He is logical and systematic. He has to be, since it is a major part of his job to solve problems, appraise policiesr and plan for the future. All these activities, which comprise small business management, require the making of sound decisions, The major task here is to make the decision-making faster, especially in the small firm. Here are some suggestions as to how the entrepreneurmanager can facilitate and improve decision-making.
- 85 1. Spot what is important. Perhaps the most important aspect of decisionmaking is the ability to distinguish between the significant and the trivial. To devote sufficient attention to problems that deserve it, you must conserve time, guard against becoming engulfed in a maze of details. The big task is to avoid letting minor problems take up so much of your time that you cannot give ample attention to more important things. 2. Use the process of delegation. Remember that mental work can be delegated, as well as manual work. In fact, many organizations have been weakened by a too-strong leader - a dynamic, domineering personality who creates what has aptly been called a "one-man organization." Do not burden yourself by refusing to delegate any decision-making process; take every opportunity to give your subordinates a chance to develop executive ability.
3. Use the exception principle. This will enable you to free yourself Under this from routine and devote more time to important decisions. principle, only exceptions to the general rules, routines, and standards are referred to you by your subordinates.
In other words, frequently recurring matters are reduced to routine, and policies are set to govern them. These are then delegated to subordinates. The entrepreneur-manager acts on the exceptional matters only. 4. Use consultative supervision Here is another way in which you can bring your subordinates into the decision-making process in a constructive way. Consultative supervision is the informal discussion with subordinates of questions in which they have an interest. In other words, you should consult your subordinates on matters that affect them. This achieves two things: a. It gives you the benefit of your subordinates' ideas and suggestions, which are worth having. b. It tends to strengthen group morale, since the feeling of solidarity and participation is increased. To put it in blunter terms: It boosts a man's ego to be asked for his advice and opinion by his boss. Besides, the boss may learn something in the process.
THE
HUMAN
RESOURCES
IN THE
SMALL
FIRM:
HOW
SHOULD
THEY
BE MANAGED
The small ff;m is notoriously deficient in its practice of personnel management. Too often this aspect of small business management is haphazard and unsystematic. Entrepreneurs are usually so busy selling and getting their products out the door that they give little or no thought to the consequences of an unplanned approach to the procurement, utilization, maintenance and *development of individuals in the organization. This neglect on the part of the entrepreneur is the cause of the personnel problems encountered by small firms as enumerated earlier in this chapter. Many-a-small company misses the opportunity to increase its effectiveness by operating its personnel functions loosely and informally.
- 86 A SOUND PERSONNEL POLTCY 7s A MUSTWith little background in management theory and practice, you may often operate by handling individual problems as they arise. You may see no connection between the decision you make in a particular instance and the establishment of a policy that will govern the outcome of similar situations in the future. Failure to formulate clearly-defined policies causes many problems for your small and growing business. This holds true in personnel management as well as in other areas. You must, therefore, appreciate the importance of establishing sound policies for carrying out the operative functions of procuring, developing, maintaining and utilizinglabour in your small enterprise. With the hiring of the first employee, you set standards that can help or hurt your future .efforts. Too often entrepreneurs believe that they cannot afford high-quality help. They hire the first person they can find regardless of background, education and potential for growth - usually relatives and nextof-kin. EMPLOYEE PROCUREMENT Personnel procurement refers to the function of hiring labour, to perform a specific task in the organization. It is a three-step process of:
1. Identifying the position to be filled, its responsibilities and the skills and background required to meet them.
2. 3. Attracting those people who have the qualifications for the position. Hiring the most promising candidate.
ReWg . The small company does not have the "come-ons" of high salary, attractive fringe benefits and other incentives of the large company. It must therefore, use every resource at its command in the search for qualified applicants for a position.
- 87 -
1.
2. 3. 4. 5. 6. 7. 8. 9.
Present employees Former employees Applicants who come unsolicited Trade and industrial associations Business friends and relations Suppliers and customers Newspaper advertisement Schools and teachers Employment agencies
and. thing . The small business is at a disadvantage because it cannot offer qenerous frinqe benefits. It must therefore attract personnel through the advantages in smallness, like camaraderie, close-knit teamwork and opportunity for rapid personal growth as the company grows. You must learn about salary levels in your particular line of business. You should also be aware of the customary work hours in your area, working conditions, incentives and other fringe benefits that may be given by firms with which you compete. So armed, you are ready to fight the battle of se1ecting the right person for the position.
The tools used in selecting the right person for the job are the application form, interview and testing.
S&etin~
1. The application form - This should not be complicated, but must be tailored to fit the needs of the organization. It should include such information as: a.
Person's name, home address, telephone number and marital status.
b. Age, date of birth and such physical characteristics as are pertinent in the business.
c.
d.
Education and training (if they ara included in job specification). Previous work experience and such other information that may be in making the selection.
necessary
When completed, the application form provides in writing the facts regarding a prospective employee's background, both personal and business. From here, his qualifications can be analyzed and evaluated for the job that must be filled.
- 88 -
- This is where the job and the applicant meet. The applicant Interview finds out about the requirements of the job. On the other hand, you, as employer, learn about the prospective employee's qualifications for the job. It should be conducted in privacy and usually by appointment. Furthermore, the interview should be planned well utilizing the following procedures:
2.
a.
b.
C.
Review the application, it is your guide. Put the man at ease with a few general remarks. Direct your questions to subjects not anwered in the application. expresses himselfw ill
d. Let the applicant do the talking, the way he tell you a great deal.
e. Close the interview by telling the applicant, "1'11 let you .II know by --------f. 9. Summarize your evaluation of the applicant. Arrange for additional interviews when necessary.
h. Above all be diplomatic, for each applicant can be a potential customer. 3. Testing - The entrepreneur should engage the services of an expert to advise him on the proper tests to be administered for specific jobs and their correct scoring and evaluation. EMPLOYEEDELELOPMENT Is the development of employees necessary ? The development of the ability to carry on the work of the organization is too important to leave to chance. To depend on the employee's initiative alone to pick up the knowledge and skill he needs is generally inadequate and inefficient. Employee development usually comes in the form of training. You should, therefore,be knowledgeable in planning the training program for your employees. You 'should:
1.
2. 3. 4. 5.
Establish the training needs. Choose the most practical training methods. Decide who will handle the training program. Train the trainer. Evaluate the results. on-the-job training, group training
The most common methods of tra ining are: and specialized training.
- 89 MAINTAINTNG AND U7-117ZlNGEMPLOYL'ES In a small business, the personnel management functions of maintaining and utilizing employees are carried out through the practice of human relations. In fact, small business management is practically the art of human relations. The way you relate with the human forces in your organization is the deciding factor ever the productivity or unproductivity of your business. Human relations involve the promotion of motivation, job satisfaction a7d cooperation among the employees. Inmost developirg countries, personnel management in small industries is synonymous to human relat,ions. It is because the cultural values and indigenous personality traits of the individuals in the small enterprises - in these countries are dominant forces that ail'ect the management system. MoaXvatian ti the key Exacting the highest level of efficiency and productivity from the workers in the small firm means more than giving them the material compensations for their performance, although, of course, it is the essential factor. Harmonious interrelationships among all the individuals and all levels-in the firm go a long way towards motivating the workers towards productivity. To motivate effectively, you will do well to remember that individuals behave the way they do because of their own particular needs which might be physiological or psychological. It must be remembered that individuals are different from one another and they are a composite of several personality dimensions. Their physical, mental and emotional make-tipmust be considered if the entrepreneur is to manage them effectively. They should be viewed as "triangles" not "squares". (See Exhibit 3) The following points will help you motivate your people to the highest performance you want them ^,amanifest:
1. Select the people you want on your team and make sure that the people who join your organization are compatible with one another.
2. To inspire your people to highest performance, and participation. See to it that your people have on matters affecting.them and that they participate discussions and analysis of decisions that directly 3. provide for communication an opportunity to be heard in the preliminary involve them.
Appraise, counsel and coach the subordinates who report directly to you.
4. Learn to direct others without arousing resentment. The obedience of your subordinates pust be secured without dest,gying initiative and creativity.
- 90 -
Fvhihit _I... . I
We am tiang&en
- not d~u.aJm
- 91 -
TECHNZQliESOF GOODHUMAN RELATTON-S By developing and applying the fo'slowing human relations techniques, you . are assured of an efficient, high-producing and effective business organization: 1. 2. Let each worker know where he stands, periodically discuss evaluations. Give credit when credit is due.
3. Inform workers in advance of changes; informed workers are more effective. 4. Let workers participate in plans and decisions affecting them; participation encourages cooperation. 5. Gain worker's confidence; earn loyalty and trust.
6. Know all your workers personally; find out their interests, habits, and touchy points and capitalize on your knowledge of them. 7. Listen to the ideas of your subordinates; they have good ideas too.
8. If your workers's behaviour is unusual for him, find out why,there's always a reason for every behaviour. 9. Try to make your wishes known by suggestions or requests whenever possible; people generally do not like to be pushed. 10. Explain the why of things that are to be done; workers do a better job when they know why. 11. When you make a mistake, admit it, and apologize. your blaming someone else. Others will resent
12. Show workers the importance of every job; this satisfies the need for security. 13. Criticize constructively. correct them. Give reason; for criticisms and ways to
14. Precede criticisms with good points and show your workers that you are trying to help them. 15. The supervisor sets the styles; do as you would have your workers do.
16. Be consistent in ycur actions; let your workers know what is expected of them.
- 92 -
17.
Shnw ccnfidpniy
18.
19. If one person gripes, find out why; the gripes cf one may be the gripe of many.
20. Settle all grievances, if possible; the unsettled grievances of one person affects everyone. 21. Back up your workers; 2cthority must accompany tesponsibility.
-----
- 93 -
CHAPTtiR
MARKEPNG MAHAGEPlE~T
Marketing in less developed countries is prescribed to a large extent by the very limited purchasing power of the average consumer. Competition grows as a bigger range of consumer products vie for the consumer's spending money. As a rule, the consumer sets priorities of expenditures and makes purchases from among d wide selection of goods, including appliance;, furniture, clothing,
- 94 sporting goods, luxury foods, etc. All of these products compete with one another for the meagre surplus income after the consumer has satisfied his be Ei LI,,b-2A..-A:,, "otisho.ti;d ab;e to distinguish has 1c neeos. ii;.iip&#! 4L.z.. 1LUOLl"ll)y > between essential and luxury goods, so that you may effectively promote and market your products. You are abare, of course, that among consuming publicsof most Asian countries, there is a deeply-rooted preference for foreign-made products. Faced with this disadvantage and drspite government import controls, you, being the local manufacturer, at once find yourself, in a manner of speaking, "on the defensive." You have to set out tn prove that the quality of your products is, at least, comparable with that of similar imported ones if not better. Likewise, you have to reckon with stiff competition from products m-de by larger, better kncwn enterprises. Obviously, then, you need to take every possible measure to make ycur products known and accepted. An aggressive marketing policy is, indeed, a must to the small producer.
Moreover, the stage of economic development of most developing countries is characterized by dynamic changes and emerging social needs. And it is these changes and new needs that offer opportunities to a businessman who should be able to take advantage of rising income, income redistribution and increasing purchasing power ahd demand. Remember that you cannot apply the same selling so you must be dynamic. techniques that used to work say, ten years ago. What used to sell like hotcakes then may accumulate dust in the store s;helvesnow. In other words, yesterday's h'nner may be today's loser. Therefore, you have to constantly update yourself with the latest marketing strategies if you want to keep scoring and stay a winner,
- 95 One of the latest marketing concepts maintainsthatpeopledo notbuy a product for i. . iijii benefits. Very few products are ijf ;+Co:C. m-J+hp- ii..-... LL- expecj-at :i&.-Z, iii-.*-i L,.iisj . iiiu i , s3.v so good that they sell themselves. Perhaps only one in a thousand. All these underscore the significance of the marketing function. In is practically the business itself. fact, it
INTEGRATED
MARKETING
APPROACH
IN SMALL
BUSINESS
Marketing assumes various meanings even among marketino people, depending on their area of marketing specialization. For instance I salesman views marketing as selling; a supermarket manager thinks f t in terms of merchandising or retailing; a product or brand manager se in reference to promotions; while an advertising executive's pers de is naturally focused on advertising. In a sense, each of them is rig1 or each is a professional specializing in his particular sphere of concent n in marketing. Together, . these spheres make up the complex marketing func As a rule, however, because of the built-in limitations of a small business you cannot afford to hire the services of such specialists. You are, there: fore, compelled to carry out the multifarious marketing activities almost singlehandedly, in addition to integrating and coordinating them with the other aspects of your business. Remember that marketing serves as the culmination of your organized and integrated effort to achieve the overall objectives of your firm,
- 96 -
Survival in the busir;essworld means bei-\gable to attract snd hold on to customers by satisfying their needs better than your competitors do. To operate more competitively and successfully, therefore you must view the marketing function this way: 1. Marketing is cti&rne/r-otient)ed.As owner-manager, you may be the top man in your organization. But in business everywhere the customer is king. Your success, therefore, as a small businessm3n depends largely on how well you satisfy your customer's needs. In effect, you are not only selling a product or service but, more importantly, satisfying a need. You must focus your attention on what your' customers need, not on what product you can make and sell.
- 97
2. Marketing is an &Xeg&a.&eci a&hL-tq. Marketing is not an isolated function. Any activity or decision is influenced by other factors within the enterprise and from its environment. For instance, a plan to develop other products greatly depends on the firm's financial resources. Or an objective to attain a greater sales volume has to be balanced with the concern .toreduce losses from bad debts. Exhibit 1 gives a framework of the firm's adaptation to its environment. IJ
04 Matrkting, 24-29.
- 98 -
The figure ahove illustrates that the environmental forces greatly affect the marketing decisions of a firm. Although consumer income is the critical market indicator, the general condition of the national economy such as inflationary indices, tax policies, legislative and regulatory measures, technological breakthroughs, social patterns, industry and competitors' practices still influence the demand situation of any product. All these forces may either reinforce or weaken your position in the market. And since you are often caught in the midstream in the process of environmental changes, you should be alert and always on the look-out for opportunities to expand or for clues to slow oown and consequently change strategies to avoid bankruptcy. If marketing is customer-oriented and conducted in an integrated manner, there is a better chance to attain the profit and growth objectives of the firm. Summing up, the integrated approach to marketing management derives from the philosophy of focusing all efforts on kfauX~qh.g and crtitimng customer With this as needs and mkL-&~qing these needs with products and services. foundation, you can proceed with the task of integrating and coordinating the following marketing activities:
- 99 -
) Identify and measure customer needs for a specific product or 1. service. 2. 3. Translate these perceived needs into product or service development . Develop and implement a p lan to make the product or service available.
4. Inform prospective customers about the availability of the product or service. 5. Stimulate demand for the product or service at a price that will yield a reasonable profit. UNDERSTANDING THE MARKET
The first step in organizing and planning marketing activities is to know and understand the market. Market here refers to all persons or institutions who buy or may be induced to buy a product or service. The market may be broadly classified into the con6umti rnc&zti and the hbineu on -ivuWoti maaket. As a rule, in marketing, you must study the general features of the consumer market to understand your own targeted market. For instance, the Philippines had a population of 36.6 million in 1970 and a projected 48 million population in 1980. The average annual population growth rate for the period 1970 to 1980 is 3.06%. With this information, statistics on the target market can then be obtained. The market is then broken down into specific groups as pertinent characteristics are identified. (See Exhibit 2). Exhibit 2 ' Sample of a Market Segmevt
- 100 -
The illustration shows that the target market gets narrower and more limited as the product or service becomes specialized, Thus the segment ofthe market targeted beha,vesin a particular manner - expressing, in the process, its needs and existing or potential desires, In the example in Exhibit 2, t!w ysung married career-woman of the upper midtile income bracket, who is the potential
customer may be described as busy, therefore, time and efficiency-conscious and willing to pay a premium price to lead both domestic and professional lives harmoniously. If she does the kitchen chores herself, she would prefer easyto-prepare meals for her family. Thus, this particular consumer is likely to consider buying instant food preparations to save on precious time and effort a ,he performs her role as working mother. At what price the product will sell, how it should look or be packaged, where to sell it, etc. are questions that can be answered only if and when the market is studied thoroughly. Understanding potential customers means knowing the answers to the following questions: . What does the market buy? . Why does it buy? . Who buys? . Hdw does it buy?
- 101 WHAT DOES THE MARKET BUY? Prodccts and services may be classified as: Dumb& ~~ooih : furniture) Tangible goods which are normally used many times (e.g., clothing,
Non-cutabLe goods :
Tangible goods which are normally consumed in one or few uses (e.g., food, drinks, office and factory supplies).
SaviceJ : Activities, benefits or satisfactions which are oFf?red for sale k.sz, repairs, consultancy services). These classifications have implications for marketing. Products that are consumed fast and purchased frequently (non-durable and services) are likely to be made available in many locations, commana a i;mal'l margin and develop brand loyalty. WHY DOES THE 'SARKETBUY? To market effectively, you have to understand what buyers look for in buying products and services. The reason could be to satisfy varied needs for food, drink, sex, shelter, transportation and prestige in which case you should focus your promotion on how well your products and services can satisfy those needs. Other buyers may also want to get the most out of their money. This wGuld indicate at least two things: that customers buy more intelligently; and that the lower the price of a product, the higher its sales. If you are selling to a mother business firm or to an institution, the reasons for buying would be related to more profits, less costs, more productivity or more efficiency. WHO BUYS? A major marketing task is to identify who makes the decision in the purchase of the product. For some products and services, there is only one decisicn maker. For others, more than one person is involved in the buying decision. A person can play one or more of the following roles in the buying process: 1. AS h@ke~cen, a person suggests that the purchase be made and influences the purchasing decision. 2. AS decides, he ultimately determines whether to buy, what, where, when and how. 3. 4. As bugm, he makes the actual purchase.
- 102 -
TCCJ
~~ll.ctrato~ . .
..w.
u-u.
In
pu?+?asi!?g
ch-ildren
's
books,
the
ibrariai?
?iciJi
be
th&
faarhon I 2~ "bL4.aI..
the
mk:lA L.m, au I
th=c
parent, the decider; the older brother or sister, the purchaser; and the child, the user. Knowing the characteristics of these persons involved, you should direct your marketing efforts towards the decider and influencer. For business ai;dother institutions, the influencer cou!d be the purchasing committee; the decider, the manager; both the informer and the user, the requisitioning department; and the buyer, the purchasing agent.
Ihe buying process may be simple (as in buying cigarettes) or complex (as in buying a house) but will usually Involve these major stages:
1. Pmcemn 06 a neecf. The customer's need for a certain product or service (or the satisfaction the product or service gives) is aroused.
Promotional efforts help arouse or intensify the customer's needs. Or the product may be pushed when the need for it is greatest, e.g., ice cream during summer, school supplies at school opening time, raincoats or umbrellas during the rainy season, etc. The customer gathers more information before 2. Pm-pamhahe ativtiy. deciding to buy by asking friends, reading the papers, actually seeing and inspecting the product or comparing prices, The pre-purchase activity must suggest promotional efforts to dwell on the merits of the products, uniform and competitive pricing, more experienced salespersons or the use of influential persons to encourage or endorse the purchase of the product. This is actually a set of decisions affecting brand, 3. PUJLC~A~.dtiion. size,colour, quantity, place to buy, etc.
- 103 -
Use 06 athe ptroduct. Knowing who uses the product and how, when, where the product is used can have marketing implications. If, for instance, customers have difficulties in using a product, this may indicate a need for printed instructions to go with the product. Or a jar of food may be used later as a drinking glass , in which case the jar is designed as a drinking glass. 5. A&S-U& l'e&Xng. After buying and using the product, the customer may, at one extreme, feel very satisfied or, at the other extreme, feel very disappointed. The reasons for these feelings, negative ones, in particular, should be looked into. If the product is spoiled or defective, there might be a problem in quality control procedures or in the handling and transport of the product.
Any information on the market will definitely affect the major decisions of a firm in other areas of operation: production, finance and personnel. It is always preferable to quantify data. The critical quantifiable information includes size, share, sales, forecast and geographical distribution of the market. In other words, do some market research. You can begin to do this by talking to your own customers and suppliers. They can furnish you valuable information which you can interpret as leads or guidelines in mapping out your marketing plans.
4.
THE
PRODUCT
LIFE
CYCLE
A product's sales and profitability can be expected to change over in time. According to Kotlergi, all products go through four stages in their lives. Knowing the stages when the change will occur can help formulate better marketing plans. These stages are illustrated in Exhibit 3 and described below.
1.
Zticfuction is a period of slow growth as the product is introduced in the market. At this stage profit is minimal.
2. GUN& is a period of rapid market acceptance and substantial profit improvement. Demand starts to accelerate as the size of the market rapidly expands during this "take off" stage. Competition will enter and the entrepreneur must start convincing the consumer to prefer kib brand to other brands. 3. MuaWuXy is a period of slowdown in sales growth because the product has achieved acceptance by most of the potential buyers. Here, the originator of the product must accept the fact 'that the market has been saturated and must commence introducing finer differentiations in the product and customer services in addition to offering them the best price level. 4. P&X.ne is the period when sales continue a strong downward drift and profits erode rapidly.
/Kotler,
MadmXng Management,
231-244.
- 104 -.
It should be noted that not all products follow exactly the pattern as illustrated in Exhibit 3. Many products fail or decline right after the introductory stage. The sales of some products may increase after the decline stage with more marketing efforts. Some products like basic commodities stay in the growth or maturity stage indefinitely.
The price of your product is one of your most important marketing decisions. Pricing is a major concern in any of the following situations:
. When the price is set for the first time: when the firm introduces a new product, sells to new markets or regularly enters bids on contract jobs. . When circumstances indicate a price change: when there is doubt whether its price is right in relation to its demand or costs considering such factors as inflation a;idshortages.
. When competition initiates a price change and the firm cannot decide whether to change its own price, and if so, by how much. When the firm produces or sells several products that have interrelated demand and/or costs. MARKETING OBJECTTVES ANV PRTCZNG Before setting the price, the firm should first determine which of the following objectives it will pursue in pushing a particular product: 1. &z&X-pen-n objective. Some compan ies set a relatively low price in order to stimulate the growth of the market and to capture a large share of it. Any of several conditions might favour setting low price: a. when the market appears to be highly price -sensitive;
- 105 -
b. when the unit costs of production and distribution fall with cumulated output; or
C. when a low price is intended to discourage actual and potential competition. 2. Mu&et-&Gun&g objetive. Some firms want to take advantage cf -Ihe existence of buyers who are ready to pay a much higher price than others because the product has high present value to them. The objective of skimming pricing is to gain a premium price from these early buyers and which will be reduced gradually to draw in the more price-oriented, elastic segtnentsof the market. It is a form of price discrimination over time rather than over space.
Ea..dy-cash-ttecmmy objec$ive. Some firms seek to set a price that will lead to a rapid recovery of cash. They may either be hardpressed for funds or regard the future as too uncertain to justify patient market cultivation.
4. Sa.td~ying objective. Some companies describe their pricing objective as the achievement of a satisfactory rate of return. The implication is that although alnotherprice might produce an even larger return over the long run, the firm is satisfied with a return that is conventional for a given level of investment and risk.
3.
5. Pmduct-Line p&omoWn 3bjetive. Some firms seek to set a price that will enhance the sales of the entire line rather than yield a profit on the product by itself. An example is loss-leader pricing, in which a popular product is priced low to attract a large number of buyers who are expected to buy the other products of the vendor.
- 106 -
WAYS OF PRICTNG PR0'VUCT.S Broadly, there are three methods of pricing products: . . . Cost-oriented pricing Demand-oriented pricing Competition-oriented pricing
Most firms set their prices largely on the bas is 1. cob-t-Oti&ed p&&g. of their costs. AT1 costs are normally included with a usually arbitrary -allocation of overhead expenses made on the basis of expected operating levels. Cost-oriented pricing is commonly used in retail trade (groceries, furniture, clothing) and in jobs or orders that are non-routine anddifficult to cost in advance such as construction work and special machinery. Some guidelines used in cost-oriented pricing are: Percentage of mark-ups should vary inversely with unit costs. This means that the lower the unit cost, the higher the percentage of mark-up; the higher the unit cost, the lower the mark-up rate, For example, a wooden ash tray costing $0.50 could be sold for $1.00 or a 100% mark-up; while a dining set costing $4,000 could be sold for $6,000 or a relatively lower mark-up rate of
50%.
b. Mark-up rates should vary inversely with turnover. This means that the more frequently a product is purchased, the lesser the mark-up; the less frequently it is bought, the higher the mark-up. For example, cigarettes and newspapers will have a lower mark-up than appliances like television sets and refrigerators.
-.
- 107 Vemnuzd-otiented pnicivlg. Demand-oriented pricing is based primarily on the intensity of demand. A high price is charged when or where demand is strong, and a low price is charged when or where demand is weak even though unit costs may be the same in both cases.
2.
Prices may vary based on the customer. A higher price is charged to an igrorant buyer or a lower price is charged to a hesitant buyer. This practice can destroy customer qcodwi!l in the long run. Prices may also be based on place, e.g., seats in movfehouses and store spaces for rent. Prices may vary based on time, e.g., seasonal products and drinks during happy hour. Prices may be based on product versions. Sl?ghtly different versions of a product are priced differently but not proportionately to their respective marginal costs. For example, a box of chocolates w ith $2 worth of b;rappingmaterials may be sold for $20 while the same box of chocolates wrapped in materials worth only $1 may be sold for $15.
3. Competition-otiented ptichg. A firm's pricing is competition-oriented when its prices are determined mainly by what other competitors are charging. The prices need not be the same. The fim may keep its prices higher or lower than the competitor's within a limited percentage.
This type of pricing is usually adopted for competing products that can scarcely be distinguished from one another, like rice, cooking oil, flour, etc. In bidding for contracts, competition-oriented pricing is also appropriate.
CHANNELS OF
DISTRIBUTION
Most businesses do not sell their goods directly to the final users. BetKeen them and the final users are various marketing intermediaries - the middlemen. iviiddiemen play a very important role in marketing especially in small industry because, with their resources, contacts and experience, they can distribute goods more efficiently and economically than if the producers were to distribute their own goods.
- 108 -
Typically, a firm starts as a local operation with a limited market. Since it has limited capital, it normally uses existing middlemen - a few wholesalers, retailers, trucking firms and warehouses. The best way to market is already set. The problem may be to convince one or a few of the available middlemen to handle the products. If the new firm succeeds, it may seek new markets. Again, the producer will tend to work through existing .middlemen. In the smaller markets, the firnimay deal directly with retailers; in the larger markets, he may work through distributors. The choice of channels, among other factors, is influenced by the following characteristics: PR0VllCTCHARACTERZSTTCS
1.
2. Bulky products, such as construction materials and furniture, usually require channels that minimize shipping distance and number of handlings. 3. Unstandardized products like custom-built machinery and special business forms are usually sold directl;.by the company because of the difficulty of finding middlemen with the required technical knowledge. 4. Products that require installation and/or maintenance services are usually sold and maintained directly by the firm or authorized dealers, CUST0MER CHARACTERZSTlCS 1. When the number of customersis large, manufacturers tend to use long channels with many middlemen on each level. The opposite is likely to happen when the number oi customers is small,
2.
The high cost of serving small and frequent orders leads producers of such products as hardware and drug items to rely chiefly on wholesalers. 3. Some customers may be more readily induced to buy products that are welldisplayed as in trade ,fairsand supermarkets. Con't forget that the establishment of effective channels of distribution is an essential step towards creating a market. It requires you to actively seek out suitable retailers to sell your products. You may select and develop wholesale facilities to provide the necessary services or use your own staff to influence and develop wholesale and retail outlets in the interest of your company and your products.
- 109 -
PROMOTING
TNE
PRODUCT
Aside from developing a good product, pricing it right and making it easily available to customers, you must also promote your product. Promotion is your firm's attempts to stimulate sales by directing persuasive communications to the buyers. You may promote your products through udventibemeti in printed materials, billboards, radio and television, pehao~.L d&L&g, free P&&LC~~~Y in the media and other business and social occasions and ~&es pnomafioM via discounts, give-aways, displays, and exhibitions. There is a greater need for promotional activities where: . Products are alike and manufacturers want to differentiate their products. . Buyer awareness of the product or its features is minimal. . Products are in the mature stage and there is a need to maintain market shares. . Products are sold on a self-service or mail-order basis. Pn fact, other forms of sales promotion have evolved in the past years as more and more Competing firms try to outwit one another- Aggressive enterprises have used lecture-demonstrations, fashion presentations, luncheon/dinner shows, television Specials, etc. as promotional strategies to stay ahead in the race. Pehgo& beee-ing has been proven to be the most effective means of promoting products because immediate feedback is obtained. However, it is also the most expensive. To favour personal selling against the other approaches depends very much on the nature of the product and the circumstances in which it is marketed. Personal selling is particularly suited to situations where:
1.
2.
The market is concentrated as in capital goods. The product has a high unit
3. The product has to be tailored to individual needs as in certain types of clothing and gadgets. 4. The personality of the salesman contributes to building up a necessary atmosphere of trust. 5. 6. The firm cannot afford to advertise. Products are traded in and trade-in values have to be determined.
Small Companies in developing countries find &&a PmrnoZLofia suitable means af marketing their products because it is adaptable to limited local situations. If you want to expand sales in remote rural districts where literacy rate is 1ow and media for advertising lacking, public demonstrations certainly serve as an effective strategy for creating a market. On the other hand, you may attack the prnbiPms Of pmmntinns ir!~&an centres by providing pVM!ntiOnai SUpFfJrt~CI
retailers through improved display inside their outlet-shops. Where promoting a particular product requires specialized technical knowledge, you m:y teach your distributors the uses of the product. Sales promotion, therefore, consists of a variety of techniques which you can apply to directly stimulate the sales of your products. A reminder: much morel A good salesman will cost you a lot but a bad one will cost you
To supplement promotional efforts,advertising is resorted to in order to increase sales to the general public. AdveM&.&g is the process of communicating with the public through the mass media. Acediaare the means of communication. Selection of the best media is a very important part of an advertising program. When faced with the problem of choosing medium or media, you have to consider (1) which media are available; (2) which media will reach the target market; and (3) whether the cost of the media justifies the expected revenue.
In determining your advertising budget fix the optimum amount of money to be spent. If you spend more than is necessary, you will lose money not just in terms of wasted dollars 5ut also because you may have been just as well-off had there been no advertising at all. You must therefore take great care in considering the use of radio, newspapers, trade journals, direct mail (if you have an efficient postal system), handbills, or even attractive displays. The telephone is another potential selling tool. Advertising budget may be determined by allocating a certain percentage of sales, a fixed amount or simply what the business can afford. Unless you have sufficient background in advertising, don't attempt to do your advertising copies yourself. Consult or hire competent professionals or advertising agencies.
- 111 -
The traditional function of packaging is to protect goods while in stock or in transit. Nowadays, protection is mainly the ob.jectiveof packing while p&zag&g has lately taken on a more sophisticated role in addition to pnotec;tionand economy. The consumer is the primary consideration in terms of convetience. Products come out in various size options and packages that are easy to open, handle or carry. Another modern concept of packaging, especially of consumer goods, is the womo;tionc& &ntion. This entails several elements of the package design, namely: size, shape, materials, colour, text and brandmark. POST-SALES SERVICE Marketing does not end with the sale nor even after the delivery and payment of the goods have %aken place. Many businessmen succeed in their promotional strategy by emphasizing the quality of their products and assuring the consumer that the good(s) he purchased will remain functioning or serviceable in the case of durable goods. As regards perishable goods, you should guarantee the freshness or replacement ofthe product. In fact, you should keep tab of complaints to know exactly how you can'improve either the quality of your product or your marketing services as a whole. Post sales service becomes even more critical when: 1. 2. 3. 4. The unit price of the product is high. The product is purchased infrequently. The product is complex as seen by the consumer. The buyer does not have much knowledge of the product.
5. The seller's share of the market is small or the product is not well known. You should also take into account the specific laws and regulations as well as standards affecting particular products notably restrictions on food and drug manufacture. EXPORT WHETING Are you considering export marketing? If you are, you have to look first at the awesome competition from firms in highly industrialized as well as that from other developing countries, Marketing of high quality and low-priced goods are the prevailing advantages of seasoned exporters who most likely operate large marketing networks. A second consideration is the fact that tastes and needs differ from country to country and you may not be able to afford the costly introduction of variations into your goods. Thirdly, the question of promotional literature in the language or even languages of the countries is sraething to reckon with.
The fourth factor in considering exporting is the existing and acceptable system of distribution. Unless your firm is producing some product which ,isvery unusual and in great volume, it is usuaily preferable to export thrcugl:trading houses which are more knowledgeable in the import-export complexities. The effort in exporting directly may not be worth the returns and satisfaction of both parties. Export markets present their own special characteristics and problems, Remember that exporting presents very complex and intricate documentation procedures, and varied unforeseen extra expenses. Your operations in the foreign market largely depends on how well you can integrate with the local environment in terms of familiarity with the given market, the maturity of economic development in the foreign nation and the country's political stability. in general, an exporter follows seven (7) major phases in processing his papers from organizing for export to liquidation of undrawn pro?+eds. Although certain circulars. presidential decrees , reorganizations and other regulatory measures may be introduced or implemented in the course of time, the activities identified in the flow chart (Exhibit 4) stand as basic inputs in export documentation.
CONCLUSION To recapitulate, let us go over the marketing mix package consisting of the interrelated activities that require coordinatinn Thnrn and integration. activities, categorized into controllables and uncontrollales, are pr&ited as marketing-relevant variables that affect the small entrepreneur's decisions. ( See Table 1)
- 113 -
Exhibit 4 Export Procedure Flow Chart Major Phases 4 4 Specific Sub-Phases Determination of export product Choice of export market iompliance with business registration requirements ORGANIZING FOR EXPORT --/ Compliance with tax requirements I .-Ii i
Choose method of conducting export transactions( i.e., directly or indirectly, thru broker or agent Registration with 601, if qualified as export producer, trader or service exporter Application with CB as export-oriented firm, if qualified Sales/Purchase Offer 1
%%T
1-6 4 !
Obtain Government Agency Commodity clearance, if required Issuance of export license by AAB -1
Issuance
F=--l--; 4 4 4 -! SHIPMENT L A + -( --/
1 '( I J
Payment of wharfaqe fees and charqes Other documentation (dependinq 01 product) Packinq Booking for freight space Bill of Lading Shipment (partial or final) of AAB report to Cd1
-/-Filing
- 114 Exhibit 4 (can't) Export Procedure Flow Chart Major Phases 4 NEGOTIATION COLL?%TION 4 -f 4 PAYMENT
I I
Specific Sub-Phases Presentation of shipping documents to AAB AAB verifies if shipping documents are in order Filinq of AAB report to CB Prescribed currencies for payment Modes of payment Payment period authorized Export Tarirf Amortizations under export deduction scheme if previously allowed 4 Filing of ABB report to CB Commodities subject to final liquidation for undrawn balance Period within which to liquidate undrawn balance 4 Submission of Liquidation Statement Filing of AAB report to CB LEGEND: I I J --I J
4 -/
I
SOURCE:
Villafuerte, Luis R.
Exputi RegKWond
Bank 06 tie
Ptippinu
J.
- 115 -
Table 1 Marketing Decision Variables Controllables Target market segments on which the firm's effort is concentrated: . . . location or geographic area target customer timing
Uncontrollables Resource availability . . availability of required materials cost and quality of required materials
Product(s) or service(s) offered: . . . . type of product or service range of products or services design features quality standards
Price .
l
Socio-cultural conditions . . . . societal values affecting consumer behaviour life style fashion consciousness consumer preferences
Advertising and Promotions . . . . advertising level advertising media advertising image sales promotions
Distribution . distribution channels . types of distribution . number of sales outlets . warehousing facilities . inventory levels Servicing . . extent of servicing service facilities
Political and legal conditions * . . political risk situation legal regulations power of regulating agencies
- 116 -
CHAPTER
VI
mat-, ntackinet~yand equipment, manpowetL,mu%& and IL&%X&A, wh.L& outpti may be Ln the Qom 06 goodd a& AIVLV~C~ .
and in tin
IAXY:~
~maUma~~.~~ac.t~&txbecauu he h.u aJ%niXed makg.tn dot a27la-tegic ehhoh . Depending on Xhe op~~.%&~naX /reytiemutta 06 kis plant, he may employ intWen# oh
the ptoduc.tion
.to the
olr job-oxden,
maSA, oh phacxA~
0the.t viaizl deciXoti that .the AmaLi! entheph.enewr maked a~ prroduction managti include the Ae&Gi.on 05 an appnophtate p.&n.t loc.aaXon and chooA.ing the plant LagouL He muAX &a be concUwzd tih A&&ing up phOdUtin AubAYA~RA, no;tabLy ma.tehicLes manageme& and .i.nvetiohy can&al, quaecity COVLI?LO~ pnadutin and p.tan&g and cov~-O~ol.
To attcLina high degxee 06 p~~oductivtiy,the eZ&ephen~ Ahautd Atike an optimum btice in the ue 06 h.12 heAouhcU.
INTRODUCTION Production and operations management refers to those activities involving planning, organizing, directing, integrating, controlling and evaluating the entire process of "creating" goods and services at the "right" cost, time, quality and quantity. The production function is to the small enterprise as the engine is to-the automobile. Production keeps your firm in constant motion to attain your primary objective of delivering "convenience" to your customer through your products. As a function, production and operations management is integrated with the other functional areas of the small enterprise. The overall relationships of production and operations management with the other functional areas of the firm is shown in Exhibit 1. Thus, it can be observed that the production function is ,closely integrated with all the other functional areas of the small enterprise and must never be treated as an independent system in itself. The organizational system continually attempts to "orchestrate" or integrate all the activities of the various functional a-sac ifi or&p to enclrrn u the attainment nf tb f+~~c 1 nr nntronmnalrS nnalc I"k.4 ..e.Ao ..UI...I..~..~ s. .-I _..I w ..WW, J.. I
Exhibit 1 The Relationship of Productidn with the Other Areas of the Firm Delivery r-
m;ltari;llc -.
-/
costing function
Note:
You are familiar with the time-honouredconflict between production and marketing people as to which of them dictates what the company produces or sells. This dilemma may or may not be present, depending on the stage of development of the small enterprise. It does not occur where both production and marketing functions are airectly assumed by the owner-manager. Subsequent growth and expansion, however, may result in the separation of these functions and the conflict becomes almost inevitable. The scheme shown in Exhibit 1 will be useful in delineating the production and marketing functions and resolving the dilemma between them. Production and operations management may look deceptively simp'ieat first but it is actually a critical area which you should manage properly. Poorly-managed production gives rise to a number of problems which may be broadly categorized as follows: This type of problem occurs when you fail to plan 1. Peanvzing-hued: adequately for your production. Common symptoms of this problem include inability to deliver at the right time and quality; failure to meet customer specifications; lack of room for physical expansion in existing plant sites; and many others. 2. GwI.W.~?-rr&..ted:Lax or inadequate control in production causes such problems as high rejection rates, low production, high raw material inventory or frequent stockouts, high cost of labour, considerable pilferages, spoilage of raw materials, etc. 3. PhoductbLtq-he&ted: Small enterprises have inherent disadvantages in terms of limited, therefore uneconomic, scale of operations. This limitation leads to the problems of sub-optimal outputs and underutilized inputs. Productivity-related problems are indicated by the following symptoms: extreme dependence on fast-depleting indigenous raw materials; excessive labour costs; low output per worker compared to other firms of similar sizes in the industry; etc. 4. Ohganizing , diheoting and in&?gemXng-he.k.Xed: This refers to those difficulties that compound the already-complicated role of the entrepreneur who is often not only general manager of the business but purchasing manager, overall supervisor, financial comptroller, marketing manager, and treasurer as well. The demands of the production and operations management functions on the entrepreneur's time can be reduced or expanded, de~~&+ng on !!owwell he handles these organization-related issues. Some of the more common complaints are: I have to explain to all my workers how this could be done;" "My supervisors cannot concentrate on supervising because they, too, are our most efficient machinists;" too much chasing around the olant facilities; etc. 5. Techno-Loqq dev&opmenX-he&u&d: To ensure the survival and maintain the viability of-the small enterprise, the entrepreneur must not only be concerned with productivity-related issues but also constantly adapt to technological developments either in terms of software (management know how) or hardware (machinery and equipment).
- il9 The following discussion will not urovide wonder drugs +n -I*~-a,, *L-b" b"Ici-11 production-related problems. Rather, it will suggest guidelines inliFfi:rto avoid or minimize the ill-effects of these problems as well as to promote awareness of the options or solutions available to you as entrepreneur-manager.
INPUTS -. Money
s Materials . Manpower
. Machineries
. Scraps ----- -.- - -1 1 Knowledge --. I Production System (A Converter) m I I A f experience L,--,-----; ; 1 I I ' I I ' I --: I I -w-w -l
It can be observed from the above that you, as the small manufacturer, must continually provide the much-needed resource inputs to sustain continuous and profitable operations. Some inputs of the firm may be considered as "one time" or fixed (e.g., land, building, machinery and equipment) on which you usually make investment only once and often at the beginning of your manufacturing operation. Other input requirements, like raw materials, manpower, methods, time, utilities, information, etc. are continuing or recurring in nature and would therefore, demand more attention from you. You should also be concerned with the interactions of the various inputs with one another as they move in to the "conversion process.'I
Essentially, a small enterprise yields two major outputs from the set of inputs: pltaclucf.~ ~uw.&x.~. You will, nevertheless, be interested in two other outand Scraps because of the growing concern for puts, namely dchapd and knodkdge. waste utilization and anxiety over fast-depleting natural resources. And knowledge, because you need to deveiop technological capabilities among your worker:;to ensure long-term survival. Knowledge acquired in the process of creati-,ygoods and services can be fed back into the production system in the form of collective experiences to support the technological build-up process.
In orchestrating the basic inputs for the processes of "creating" goods and services you should bear in mind the principles earlier discussed in this handbook, namely: 1. P&W your fixed or "one time" inputs (i.e., land, building, machineries, etc.) properly. These inputs require rigorous and meticulous planning, since initial flows can be very expensive to correct in the long run. Likewise you must plan your recurrent inputs (i.e., manpower, materials, etc.), continually adjusting the firm's business goals and determining ways of attaining them.
2. O~anize the manpower inputs. A simple and highly flexible organization setup will help you achieve your company's goals and objectives. Similarly, you must organize other inputs like materials and utilities to conform with the methods of processing them. 3. Ac~Xvate the plant organizational set-up, methods, procedures, etc., by continually motivating, communicating and integrating all the required inputs to produce the specified outputs most efficiently. 4. GIhile in the process of organizing and activating, coulA;tLoe input resources to ensure their effective utilization. 5. Finally, periodically eva&u&e the performance of all the resources and systems used not only in production, but generally, in attaining company objectives. In the process you can make adjustments as necessary in order to ensure the long term survival of the firm. Most of these principles will be discussed in some detail and in applied manner that is, insofar as they relate to the production and operation function of the small enterprise. PRODUCTION ALTERNATIVES
PRODUCTION SYSTEM Have you considered which type of production system to use in your manufacturing operation? Be sure you don't decide rashly. For you, who are a small manufacturer, this decision is crucial because you have very limited margin for strategic error. There are various options open to you when you decide on the type of production system to use. Generally, these options can be classified into two broad categories: Wetonittevllt and CO~UULOUA. The intermittent production system is one that is simply responsive to specific orders or buyers while the continuous production system is one where the enterprise manufactures to stock (that is, even without a buyer at a given time).
- 121 The intermittent system may be further sub-divided into the jab-otrden type and &ad.&%ncLe n~64 pkoduotian while the continuous system may be broken down into the modtin m~dd ptoduclion and the plrocesd .@pe. This is commonly employed by service enterprises and Job-o&a OIL&~vLce type: highly "customized" factories or those firms that manufacture products based on the specialized requirements of a specific customer. Examples are custombuilt furniture making, tailoring shops, auto-repair shops, auto-spares reconditioning shops, appliances repair shops, etc. Schematically, a job order or service type of production system can be represented as shown in Exhibit 3. Exhibit 3
This type of production system is characterized by small-sized volume per job order, the employment of highly-skilled and multiple-skilled workers and the extensive use of "general purpose" machineries and equipment. Because it deals with widelyvarying product designs, the enterprise employing this type of.production system usually has low-productivity problems, is unable to attain specialization, and experiences considerable fluctuations in its manufacturing timetable.
type: This is emplayed by firms which produce uniform products in large quantities for specified markets. There are two versions 0.Fthe mass production set-up. One attempts to produce the few product lines in large volume. This is exemplified by the garment manufacturer who produces col'lars,cuffs, front parts, sleeves, etc.,separately in hundreds or so which are then assembled in the final stage. This'version of the mass production set-upcan be illustrated as shown below:
MLW pJtodutin
INPUTS -
! j I
- 122 -
Firms employing this type of production system are characterized by large volume of production per product, high degree of specialization in labour force as well as in machineries/equipment emplcyed. The other version requires the production of intermediate outputs or parts which can be interchanged to produce various lines in large quantities. An example of this type is the furniture manufacturer who employs subcontractors to produce some parts of the products and combines these to form the final products. Another way of illustrating this is by citing the manufacturer who makes use of "completely-knocked-down" (CKD) furniture manufacturing process. This version of the mass production system can be represented by the diagram shown in Exhibit 4-a.
Exhibit 4-a Schematic diagram of mass production system (Version B) Interchangeable parts
INPUTSb,
_j
Although this version of the mass production type has not gained enough popularity in the case of small and medium enterprises within the TECHNONET region, it can be observed that firms employing this system would have the advantage of catering to small-sized orders and large volume of production. Pmce6d -type: This is used by firms producing a specific prodilctwith very little human interference in the process. Examples include mining, processing, milk and dairy products processing; food processing, food condiments processing, etc. It becomes apparent from the preceding discussions on production system that your choice will greatly depend upon the type, requirements and characteristics of the markets you serve, the type of products produced, the processes required and the potentials of your firm for market and production expansion. In making your decision, you should consider the degree 06 ~epe.tL.tivenu~ Fthe products required and the degrree oh human in@uence in the process to be us i (See Exhibit 5). From here, it should be reasonably easy to choose the approp rate system to use.
- 123 Exhibit 5 Types of Production Systems, Their Degree of Repetitiveness and Human Influence on the Process
I I I I
I I I I
, 100% I I I r I
I I I I I
; I I I I
1 I I ; I I I
I I I I
I I
100%
Job order Mass production II type Mass production I Process type
The selection of the type of production system to employ is a strategic decision. Needless to say, shifting from one system to another can be very expensive and timeconsuming. A furniture manufacturer in Thailand, which started as a job-shop catering to specific and limited customers in the domestic market, will require a large infusion of capital, technological knowhow and a sizeable amount of "management'inputs to be able to export teak furniture to the European markets. This situation, evidently, is critical. Essentially, this will call for a "happy" compromise between the entrepreneur's short-term goals (limited market, fast investment payback,gaining enough experience and knowhow, etc.) and his long-term goals (export market, quantity in volume and not in number of product lines, rationalization of production facilities, etc.). He should likewise deliberate on product or product lines to be manufactured, initial capitalization, target markets and their characteristics and available technology. PLANT LOCATZON Determining where a production system or a manufacturinq plant will be located is another strategic decision that entrepreneurs face period;Cally, since products, processes, markets and sources of mater ials are constantly changing. A plant that is located in a once desirable area may suddenly find itse1f cramped for space or
- 124 forced to take on high costs of deliveries because the markets or the raw material suppliers hive moved. Since it is costly to move or relocate, site selection is a long-term commitment so much like the decision involving the choice of the type of production system. Indeed, no location can permanently guarantee success; but definitely, some locations inhibit success. Thus decisions on location should always seek to determine desirable and undesirable aspects of a location alternative. The major cri%eria for success is that the ideal location is "one where the unit coits of manufacturing and distribution are at the minimum and where prices and volume of sales will generate maximum profit." The various factors, tangible and intangible, quantifiable and unquantifiable, are itemized in a diagram to facilitate decisions (See Exhibit 6).
location
Industrial estates
Q
vste
Community facilities
disposal~y
- 125 Generally, these factors tend to affect the unit cost of manufacturing and distributing the output. )f the firm, as discussed below:
1.
PkaxhuXy to dowwed 06 kaw maC&c&. The acquisition of bulky raw material inputs can be very expensive if the plant is located very far from their source.
2. P/roximity&I manheX. Similarly, the distribution costs of the finished products will be greatly affected by the plant's proximity to its most important market sites. The cost of transporting,as well as the avail3. Th.anhpa)ltatian dac.iXLties. ability, reliability and frequencv of transport services in and out of the chosen site is an important consideration. Labour costs, which vary from place to place within the country,is 4. Labowr. certainly an essential factor. You must take into account training costs, recruitment costs (in the critical skills, most labourers would require advance payments), attitudes toward work, quality of workmanship and the like. 5. Powetl,&ti and L&&X&U. Likewise, the cost of these usually vary within a country. In addition to cost, you should also be concerned with the reliability, quality and frequency of the available supply of power, fuel and other utilities. Although this factor may look deceptively insignificant, 6. Waste dihpout. process types of production systems may incur considerable costs in disposing waste.
7, Land and zon.i@aLLon m~tiemeti. The availability, cost and quality of land as plant site is a major concern in locating your production system. Here, you need to reckon with zonal requiretnentswhich have been newly introduced in most developing countries. Plants situated in a once "good" location may find itself in a residential zone after five years. Relocating in this case will be very expensive.
8. Taxeb and pervnit6. The types and costs of the taxes, licences and permits to operate a small manufacturing concern vary from place to place.
9. community L&e. The plant should be located within or very close to an appropriate siz5 of a community to minimize additional expenses of providing housing facilities for the workers, transportation services, etc.
10. Csmmtiy The facilities available within a certain community daciettieb. must likewise be considered, including medical facilities (how far is the plant to the nearest first-aid clinic), recreation, religious (mosques, churches, etc.) and entertainment facilities. 11. 7nduba &Llkhzb. As a rule, you should favour staying within or close to an industrial estate. The estate is composed of plots of land or constructed factories equipped with necessary services and utilities, where you can come in, hire your men, set up the machine and start commercial production. If you locate within an industrial estate area from the perspective of plant location, you will hasten the process of installing the plant and enjoy added benefits of "linking" with the other manufacturing plants in the area,
- 12c '12. Ftiwre exprrtiianp-ean6. In deciding plant location, reserve a portion of the area for future expansion activities. 13. commuvtcty!L?xaadeb. Here attitudes refer to the summation of the values, traditions, or pre-dispositions of a certain community with regard to business undertakings. Sometimes, community attitudes can be dysfunctional to the business: "We don't like to have a coffin manufacturing company here; it's just bad luck for the community." Or attitudes can be reinforcing: "Your project is precisely what-the community needs in order to profitably utilize what were once thought of as waste materials." When faced with a plant location decision s consider the following options: . . . Locate Locate Locate - - - in a place already owned by the industrialists (footloose method). in an existing cramped location but expand vertically. in an entirely new space.
A metalworking entrepreneur in Sri Lanka, for example, who specialized in duplicating and repairing auto spares, recalls that he located his firm in its present site because he thought owning ,theproperty would automatically lead to a cheaper cost of production. In 1978, however, the firm decided to shift to sheet-metal parts fabrication in spite of the distance of his existing location from the ports which is the landing site of sheetmetal materials. Although this was not much of a problem in the beginning, the increasing volume of production and the fast-i-ising cost of fuel prompted the company to look for another more appropriate site. An effective way of dealing with a plant location decision in small enterprises would be to use the checklist in Exhibit 7. This checklist will enable you to consider all the alternatives available using the factors to be considered in their totality. The factors have been subdivided into "quantifiable" (where numerical data could be found to substantiate the decision-making process) or "non-quantifiable" (where use of subjective approaches are needed to arrive at the decision). It should further be noted that sometimes just one criterion - and it could even be a minor one - could outweigh all the others in deciding about location, depending upon the nature of the enterprise'soperations and the value system as well as the viewpoint taken by the entrepreneur. PLANT LAYOUT
As soon as you have decided where to locate your production system your next important task would be to consider the physical a.rrangementsof plant facilities. These include working space for operating equipment, production personnel, indirect workers and other support services, as well as space for materials movement and storage areas. This set of activities performed to attain the most efficient and economical physical arrangement of the plant is known as p.&u.rzX &you,t. Remember that a good plant layout:
.
Provides the most advantageous and economical work flow. Reduces material movements to the minimum. Spots and effectively utilizes all available spaces.
. .
A.
QUANTIFIABLE FACTORS
RLTER
l-IVES
1 1.
2. Cost of raw materials acquisition er unit) (p Cost of delivery of raw materials to . City A . City B City C Average labour costs Costs of permits, licences etc. per annum Handling costs: . Materials Finished products Land: . Costs (acquisition) . Rental Taxes, improvements utilities costs . Water . Electricity Others &hers
REMARKS
3. 4. 5. 6.
7.
8.
Totals Per unit cost of production B. :: i: 5. NON-QUANTIFIABLE FACTORS Community attitudes Industrial estates Community facilities Community size Potential as a growth center For non-quantifiable factors, the follcwing subjective criterion can be used to rate the desirability of a location: ED F A B C Excellent Very satisfactory Satisfactory Fair Poor Very poor
Note:
- 128 -
. Is flexible and provides room for adjustment. . Reduces delays and work stoppages.
shop.
A metalworking firm in Bangladesh, originally established to fabricate selected bicycle parts, later diversified into production of metal household parts like door hinges and window panes. In so diversifying, the entrepreneur forgot to adjust his physical fabrication facilities accordingly. It took two industrial eXtenSiOn officers to diagnose the root cause of his low productivity: very poor layout.
k?uyolLth.
There are basically two types of layout arrangements: the pfzoc~h and phodu&
In layouting by process, all machines performing similar tasks or processes are grouped together in one area or department. An example of this type of layoutis the medium-sized machine shop, which lays out all the drilling machines in one areaand all the lathes in another. This type of layout is commonly employed by companies using the intermittent type of production and those producing a limited number of products. If a standard product is not produced in large quantities, layout by process is usually more desirable because of the flexibility it allows. Exhibit 8 illustrates a furniture manufacturing plant layout employing the process type. In an intermittent production activity, process layout offers a number of advantages when applied, including capital investment because of less duplication of machineries and equipment, maximum utilization of machineries and equipment; considerable flexibility in terms of tasksperformed;continuity in manufacturing activity even if one machine breaks down ; and generally lower production costs for small firms producing multiple products in relatively small volumes. On the other hand, this type of layout has the following draubacks: difficulties in scheduling, routing and controlling of the manufacture of products since almost limitless combinations of sequences can often be used in processing similar items; high materials handling costs; and problems related to coordination and control because of unlimited manufacturing variations.
- 129 Exhibit 8
An
Illustration
Plant office
Assembly szctior,
Lumberyard
1 I I I
Legend:
- ----_-_
m posts
Imaginary dividitlgline Theoretical flow of materials
- 130 -
In product layout, the machinery and equipment are located according to the sequence of operations involved in manufacturing the product. Thus, if the sequence of operations in the manufacture of a steel box invofves: cu+%zg bending
then the machines are arranged in such a way that the cutting area is situated first, followed by the area where the bending and nibbling machines are installed, then by the pneumatic hand-drilling section and, finally, the assembly area. In other words, the operations involved in the fabrication of a product are first determined ,inthe order in which they are performed. Machines and equipment needed to effect these operations are then laid out in accordance with this sequence. Therefore, in a product layout, different machines are grouped in an area to process only one product or a few very similar products. The product type of plant layout is very useful to the continuous type of production system. Exhibit 9 shows an example of the product type of layout of a small enterprise producing chalkboards, chalks and erasers. Exhibit 9 An Illustrative Example of a Product Type of Layout r
i
-----------------------Lumber Yard
-I
- 131 The product layout has the following advantages: makes automation and mechanization 1 more feasible; allows application of labour specialization; routing the product is not a problem; labour and material flow can be easily controlled; less inspection is required per area because machines perform a distinct operation on the product; promotes better utilization of floor space; and causes less materials-handling problems. On the other hand, the product layout has the following disadvantages: relatively inflexible; economically feasible only in manufacturing a product in extremely large quantities; useful only for a given product where balancing sf production lines is possible; may be costly for products that are susceptible to changes in fad, technology and preferences because of the need to modify and replace special purpose equipment; higher capital investments due to machinery duplications and high cost of special purpose equipment. Another l'ariationof the product type of plant layout is the one which could be termed as the fixed position layout. This is a layout where the raw materials essentially do not move. They are placed in a "fixed position" and worked on by the workers. Examples of this include the lapidaries manufacturing in the Philippines, the traditional boatmaking process in Indonesia and the production of "outdoor statues". Whichever type of plant layout has been adopted, the following principles in plant layout may be used as effective guides to ensure that "every square centimetre generates profit."
1.
Pnincifle
The best factory layout is achieved when manpower, articles, machineries, processes, and other factors are so in+rrated that these diverse factors form a well-arranged and functional whole. 2. Pticifle 06 bhotiebt 27uzvet titince
l'hebest layout is one which ensures the transport of art icles over the shortest distance between one process and another.
The best layout is one in which working areas are arranged in the same sequence as that followed in the shaping, processing and assembly of materials.
4.
Phci@e
06 -thee-cEmeMaiond
dpace
Maximum economy is secured when al'1 the available spaces are utilized effectively, not only horizontally but also vertically. 5. Ptic-L@e
06 ha.hh da&ion
and aa,(ctg
The best layout is one which permits adjustment or rearrangement at the lowest cost and with the least inconvenience.
Besides being concerned with the major inputs to the production system, you should also set up sub-systems that will handle specific functions inside the "conversion process'. There are three major production sub-systems which are critical to small enterprises, namely:
.
. .
Materials management and inventory control Quality control Production planning and control
To be sure, there are other production sub-systems, which, however, are seldom encountered by small enterprises and shall, therefore, not be discussed in this Handbook. These include product design and planning, process control, plant maintenance, safety and accident prevention, energy conservation and pollution and waste management. MATERlALS MANAGEMENT AND TNVENTORY CONTROL This particular sub-system attempts to manage the "materials" inputs of the small enterprises. "Materials", in this case, include: raw materials, semi-finished goods, goods in process, scraps, wastes, finished products, supplies, indirect materials, tools,jigs, etc. But it is crucial in many small enterprises in developing countries, especially those that require high materials content in their products. The average small firm can attribute 40 to 60% of total production cost to materials. The concept of managing materials acquisition, utilization, and distribution is rather new to most small manufacturing plants. Materials management covers the other functional areas of production and operations management, notably: 1. 2. 3. 4. 5. Production planning and scheduling Purchasing Materials handling Warehousing/storage Inventory control
Materials management normally begins at the p&ocfutian y.Lunnitig stage of the firm where materials are generally specified in terms of quality, quantity, time needed, etc. Materials management will ensure that materials are available for processing at the time they are needed as specified in the production plan. P&~cu/temetiof the materials shouid allow for some "lead time" (which generally refers to the interval between the time the material is ordered and the time it is received) and is made through a production service function known as pu'zclztiing. As soon as the materials have been inspected and received in the firm's premises, the matehiaed hantig function of materials management takes over. This function sees to it that the required materials are transferred from one work station to another in the most expedient and effective way.
- 133 -
&~~ehous&g is the "space-providing" function of materials management. It provides space for incoming raw materials , in-process materials and finished goods. The inve&orry COK&.O~ function of materials management governs the amount of financial resources tied-up in raw materials in stock. Exhibit 10 shows the scope of materials management. Exhibit 10 Scope of Materials Management
Specifies raw materials in terms of quality, quantity and time needed to meet customer requirements.
PURCHASING
Buys the raw materials needed by the firm at the right cost and time and from the right suppliers.
INVENTORY CONTROL
MATERIALS HANDLING
Handles/transfers,'oovesthe materials within the firm's premises to attain efficiency and lower costs.
As small manufacturer, you should give serious thoughts to the following questions: 1. 2. 3. Where to buy the raw materials required. How much to buy at the most economical costs. When to buy the materials.
TO deal with these questions, you shouid concentrate on the purchasing function. Generally, the objective of the purchasing function is as shown in Exhibit 11.
t0
produce the required raw materials at the /Quantity Quality Time Price \ 'Source
The purchasing system can be implemented in a close loop manner as shown in Exhibit 12. This involves the following phases: 1. 2. 3. 4. 5. 6. 7. Requisition from using departments Selection of suppliers Issuance of orders Receipt of materials from suppliers Quality inspection of materials Checking of suppliers' invoices Issuing the materials to using departments
The basic purchasing cycle can be implemented in a small manufacturing firm using the following forins: 1. A user department within the firm will indicate its needs for materials and supplies on a heqLu%tbn &mn.
2.
If these materials are available in stock (i.e., materials regularly used in the plant), then a store requisition form is filled up. This is called @m.
h.tmk .tqtiUon
3. This directly goes to the stores department and requirements are supplied from there.
Delay
orders
/ 1
Suppliers' system 4 6 In cases where materials are to be directly ordered from suppliers, a purchase requisition form is filled up by the person representing the department needing the materials. This form contains data on: . . . . . . . materials name or code identification amount needed desired delivery date technical specifications other; s is usually called the
non-atick
mp.&&by~
@m.
- 136 5. For items that are repetitive in nature, and those for which purchases are made to replenish stocks,a a?r.ave.f%~g mquihtbn dofun may be used. The purchasing function must continually assure the procurement of raw materials from the right source. You can achieve this by considering the following factors when purchasing:
1.
2. 3. 4. 5. 6.
Connnercialavailabil ity of the material. Quantity requirement over a certain period of -roduction time. Available financial resources of the firm. Available space (if the materials needed are bulky), Time factor in purchasing. Purpose of the purchase, i.e., one-type purchase or multiple-type purchase.
As soon as the materials needed for production have been purchased, they are handled, transported and moved inside the plant in as "economical" a manner as possible. All these activities related to the movement of the materials inside the plant may betermed as m&x.&& hntig. The following principle& may serve as useful guides towards efficient, safe and economical handling of materials.
1. Unnecessary handling requires money and does not increase the value of the product.
2. Try to eliminate as much handling as possible. If it is required, try to use mechanical means instead of manpower whenever possible. 3. A handling process should be adequately combined with the processes of work, inspection, storage and other handling processes that precede or follow it. 4. In order to.minimize the cost required for handling, the ordinary working process should include as much hand tools and semi-automatic machineries as possible. 5. All the handling systems should be integrated.
6. As in the case of "production means" , an active effort should be made to update the facilities and means for materials handling whenever new equipment which promises higher efficiency is introduced to the market. The other aspect of purchasing and materials management is the control of the financial resources tied up in raw materials in stock. This is within the purview of inventory control. Essentially, inventot-14 control attempts to regulate L/Nagashima, 100 Management Ch.ahh, 182.
- 137 the investments in inventories at some economical point while assuring an optimum level of materials in stock for the effective implementation of the production plans. In small manufacturing firms, the term "inventories" normally refers to the following: of the product.
1.
Raul nlllxettiapd
2. Puhchaded pahtb - These items are procured to be a part of the product and do not need any form of reprocessing. 3. 4. op&?lcacng buppG?A - These items are indirectly used in the processing of the product and are not seen in the finished product.
TOO& - These items are necessary to keep the machinery and equipment of the company in good operating conditions.
Finidhed goods - These are the products that are ready to be sold and/or delivered to the customers. 7. l%l.db in ptrOW.bb These include fabricated parts and sub-assemblies. These items are used to protect finsihed products.
8.
Ptickaging matUuIuI.5 -
To regulate the investments in the above inventories, the purchasing function should be guided by some form of inventory policy. Two of the more important questions inventory policy should attempt to answer are: "How much of material X to buy?" and "When do we make the first purchase, the next purchase and so on of material X?" Let us deal with the first question.
In answering this question, it is helpful to analyze the various cost items, then the behaviour and degree by which you can control such costs (degree of controllability). Generally, the cost items involved in the purchasing transaction include the price of the material, procurement cost and the inventory carrying costs. The behaviour, degree of controllability, units of measure and examples are summarized in Exhibit 13. Furthermore, Exhibit 14 shows the aehaviour of the procurement and inventory carrying costs with respect to varying quantity levels.
As shown in the exhibit, procurement costs per order tend to decrease as the volume of the materials per order decreases. The inventory carrying cost, on the other hand,tends to increase as the quantity of the materials purchased increases. If you add the inventory carrying costs and the procurement costs at varying quantity levels, a curve known as the total incremental purchase cost can be generated. This total cost excludes the price we pay for the raw materials and as can be observed. it is like a 'parabola' opening upwards. The lowest point in the total incremental cost curve indicates the economic ordering costs (E.O.C.) and the economic ordering quantity (E.o.Q.).
Exhibit 13
Costs Involved
in a Purchasing Transaction
1.
Price
xternal to the
carrying costs
Taxes paid for the materials ordered Interest expense Obsolescense Insurance Depreciation
- 139 Finally, you may observe that, if you order less than the EOQ point, the total incremental costs are relatively high and while if you order more than the EOQ point, the costs likewise are high. This concept is valuable to the small entrepreneur for it provides a guide for determining economic levels of materials inventory. Moreover, the following facts can be discerned from the concept:
1.
2.
3. Buying in large quantities enables the manufacturer to purchase raw materials at some quantity discounts. There are various ways of estimating the economic order quantities of the critical raw materials in your firm. Assistance could be obtained from the small industry extension agents, or from your accountant-bookkeeper.
Exhibit 14
E.O.C.*
Procurement costs
Where: - Total incremental purchase costs is the sum of inventory carrying costs and procurement costs at various ordering quantities.
- 140 material
2.
3. L&age 8.aZe - This is the average number of materials or parts consumed for a given period of time. For the purpose of establishing the reorder point, usage rate will be used to mean the rate of consumption of the minimum level of inventory. 4.
Pmcu.ement Lead time - This is time required in purchasing materials and parts from the signing of the requisition slip to delivery into the store room.
Exhibit 15 t UN!TS I Maximum inventory level The Relationship of the Four Factors of the Reorder Point
Reorder point Order point Minimum inventor? level I Average --@ time to consume order Period+
In practice, there are many variations to the economic order quantities and the reorder point concepts, such as:
1. TWO-b.ih bybhm - The industrialist will procure enough quantities of a particular raw material and stock them in two-bin containers. When one of the bins have been emptied then it is time to reorder. How much will be bought and the appropriate volume of the bin may be based on experience in the trade or on some form of scientific estimate.
2.
dollar 3.
vOd%VL-hhi.t b ybtU?I - This is another version of the two-bin system which uses the
value of the available raw materials as the indicator to purchase. L&uX,etc. Other variations include qu.untLty,
The other aspect of materials management is mehoustig of the materials and of the finished products. The warehousing function,to be effective,must ensure continuous service to the other production sub-systems of the firm. Ar, in inventahy contW.t, the warehouse must contain only "enough" materials for future production use.
- 141 -
2UALTTY CONTROL Another very important area in production and operations management of small manufacturing enterprises-isquality control. There are many ways by which quality control has been viewed by the small entrepreneurs in Asia. This subsystem assures the conformance of the outputs of the production system with the needs of the target market. Likewise, the quality of the product of a firm tells much about the orientation, management and capability of the firm. In Japan, for example, quality control is the concern of everyone in the manufacturing firm, from top management to the lowliest labourers and from the marketing People to research and development personnel. In Singapore, institutions like the Singapore Institute of Standards and Industrial Research (SISIR),are viewed both as a "filter" and "facilitator" system for the country. "Filter", because they prevent the entrance of inferior quality products market and "facilitator", because they attempt to continually in the local upgrade the quality standards of products manufactured in the country for both domestic and export markets. Small and medium scale manufacturing industries in Hong Kong have started to install effective quality control systems with the assistance of the Hong Kong Productivity Centre (HKPC) and other private and public institutions. In countries like Bangladesh, the Philippines, Malaysia, Thailand, Indonesia and Sri Lanka, there are substantial initiatives to encourage small and medium industries to establish effective quality control programs. 2&Y What's all these about quality? In the case of small and medium manufacturing plants, "quality" has been viewed in many ways. One way is from the point of view of the manufacturer: "I will produce whatever I think is best for my client." Still another viewpoint is that of the customers: "Manufacturers should produce this product this way, because welike it this way." There are substantial indications that "quality" must always be viewed from the customers' viewpoint since the definition of quality emanates from the customers which is then refined or reinterpreted by the manufacturers. Exhibit.16 shows a general pattern as to how "quality" definitions emerge. From the diagram in Exhibit 16, you will note that the definition of quality evolves around the physical properties of the products that conform or match with the requirements of the end-users or customers. This definition must, however, nevm be confused with "perfect products." In viewfng the quality of the product, the manufacturer should consider two major CLttrLibtic. characteristics: vaniab&and Va.Gzb&. chanactetrtititi refer to the physical characteristics which are directly measurable, i.e., length, width, acidity, thickness, elasticity, strength, etc. , while attrLibu& chanact~~%X~ refer to those which cannot be directly measured physically, i.e., beauty, smoothness, appeal, etc.
- 142 -
I-
\ ', \
\
CUSTOMER'S ENVIRONMENT
\ \ 1 J /
expressed I I II '
to
; I ;
and
&-
i I
I I I I I
transformed to/ \ \
-\ \ \ \ \ \ \ I I _t
\ \ \
satisfy or dissatisfy// \ \
I
/
Manufacturin cannel/V
ia,
-
(47
I / I
--
I t-f-2
Still another perception of quality involves what is known as qua&Ay 06 de&n and yuaecty 06 con,$omance. Quality of design is concerned with the implications of deciding which design of the product maximizes the specific customers' satisfaction, while quality of conformance is a continuing process of measuring. testing and adjusting to ensure the maintenance of the level of quality stipulated in the'design stage.
---
__
- 143 -
Quality control means the identification and correction of various causes, defects and variations from the set standards or specifications of a product. The objective; of every quality control initiative must be both &emedide and The remedial objective involves sorting out the defectives at the pevtive. final stage of production so that only potentially acceptable "good" products will reach the end-users. The preventive aspect is concerned with determining at various points or stages of production the reason why defectives occur in order to keep them at a minimum at the final stage of production. One common way of ensuring quality control in small manufacturing plants is the conduct of various inspection processes. Inspection focuses on the application of tests and measuring devices to compare products and performance with specified standards. Inspection processes permit the sorting out of the "acceptables" from the "defectives". Small manufacturing companies in Southeast Asia use various approaches to quality control and quality inspection processes. Among these approaches are: 1. The owner-managerisaskilled craftsman and he is his own "final inspector" or he may employ a supervisor with a long experience in a given trade who is considered the "final inspector". Whatever this ultimate inspector claims to be of good quality is accepted by the customers. Some "authoritarian" owner-managers (prevalent in small garment manufacturing companies in the Philippines) still charges fines from machine operators for the defectives generated.
2.
3. In more sophisticated medium-sized firms, publication of rate of defectives are made, tied up with some sort of an incentive package for the group of workers having zero or very minimal rate of defects within a defined production period.
In order to ensure control of quality, the procedures outline in Exhibit 17 may be useful. The first step involves making decidiorti oila%e.A&F&& to be adopted. This decision is the first important consideration in ascertaining themoneycontrol of quality in a small manufacturing plant. Between entrepreneurs and end-users, such standards may be set, with both sides concentrating on the "trade offs" involved in standaras setting. In other words, manufacturers and end-users compromise or meet midway. If the entrepreneurs will give in too much to the wishes of the end-users, the final product may turn out to be too expensive and take a longer time to produce. If on the other hand, the end-user will give in too much to the changes suggested by the entrep:*eneur, the product may turn out to be inappropriate to his needs. Even in metalworking industries where specifications are expected to be detailed and elaborate, technical drawings of required parts are seldom used in clarifying standards. This is true of-most metalworking firms in Bangladesh, the Philippine:;,Thailand and Sri Lanka.
- 144 Exhibit 17 Procedures for Assuring Control of Quality in Small Manufacturing Plants
I L -----mm I
rkarL-i nn where b,IbbR ,tty materials,component parts and products are needed in the entire process Ce+=l.l G.-h nn; L3CUUI rJ311 ,,,nts
r\c I I
I I
-em---I I
Develop checklists and identify checking tools at every point in the process whenever needed
i
I . I I
I
r > 1
I
4
i
1
k--y----
06 acceptabiLL.ty err ;tohvumce is the second step. Here, the entrepreneur is concerned about the permissible variations in the basic criterion agreed upon in the first step. Again in tl,emetalworking industries, for example, this is expressed in terms of the basic criterion plus or minus an acceptable tolerance limit, i.e., length of part 30332 must be 2.0 mm f .004. It should be noted that the tolerance limits should be broad enough to accommodate "chance variations" or those variations caused by factors inherent in the production processes.
1
- 145 The next step is determining the manufacturing sequence. Actually, this procedure is also needed in the production planning phase where processes, machinerylequipment operations , operators, workers, etc. to be employed to produce the product are identified. From the manufacturing sequence, the entrepreneur may be able to identify,with the aid of the customer,those critical points where strict quality adherence should be maintained. These points will be considered as checkpoints wherein inspections will be made to ensure conformance with standards. The next step involves the listing of procedures which must be followed by the workers or inspectors in ascertaining conformance to the quality level established at the first step. Attention should be given to "hardware" (tools for inspection checks) and "software" (procedures for inspections). Typical hardwares employed in small and medium metalworking firms include footrules, calipers, micrometers, dial gauge, thickness gauge, snap gauge, "go/no-go" gauges, etc. Finally, inspection system must be activated. Here, the industrialist should ask questions like: "Who is responsible for ensuring the quality of raw materials used?" "Who is responsible for checking the first, second and third critical points in the process?" "Who will check the final products," etc. There are many ways by which inspection may be carried out normally: first product inspection, random samplingi inspection by batch and inspection of ail the products. Once these and similar questions have been answered satisfactorily, the system can be implemented, with proper corrections and adjustments where or when necessary. P&ocfution pa-(znting and con;DroQ One of the most important sub-systems of a production system of a small manufacturing enterprise is the production planning and control sub-system. As the information nerve center of the entire production, production planning and control assures that the flow of materials, money, machinery, men, time and information is regular, orderly and sequential and that it is provided at a rate which will permit the production system to meet delivery schedules. Essentially, production planning and control will have the elements shown in Exhibit 18. Generally, the planning function consists of the following tasks:
1.
2. 3. 4.
Coordinating production department with other departments of the business. Determining what the department must produce based on market survey. Calculating the quantities involved based on sales forecasts. Scheduling the delivery of the product to the customers.
5. Programming the time and quantity requirements for materials, parts, Tabour and facilities. 6. Synchronizing the contribution of engineering, personnel, purchasing and administration to the total production activity.
Determining materials requirements,tools, manpower inputs,etc. - Selecting the most appropriate path of manufacturing sequences throughout the entire production system
- Preparation of production orders and timetables - Authorizing operations,processes and making work assignments - Eliminating snags that develop during the entire production operation A simplified phodution plating scheme is presented in Exhibit hand,p&oduction cotioehas the following functions: 1. Promotes effective shop operations due to within the production department. 2. 19. On the other
3. Involves routing, loading or scheduling, instructions, and expediting or follow-up . The two aspects of p~odutian plunnAzg and pkodution discussed separately later in this chapter. con&okZ shall beexhaustively
Actually, in most instances, gmadu&Lon pJIunn&g is not as systematic as shown in most of the the simplified scheme in Exhibit 19. Among small enterprises, As a planning activities are made and stored in the "head" of the entrepreneur. hismindtoo frequently consequence, there is the dangerthattheentrepreneurmaychange resulting in inordinate and uneconomical flexibility in planning. Moreover, an entrepreneur who has a lot of things in his mind is liable to forget some of his plans which he has only mentally recorded. A majority of the job-shop printing businesses in the Philippines h?s not made it a habit to schedule production activities because of the frequent "paki;'-2/ job orders. This is an unprofessional scheduling practice wherein the customers'
Z/May be understood here as a personal request by a customer to give prior'ty to );is order, regardless of previous production schedules.
- 147 relationship with the printer is a more important consideratinn profit, set-up costs3 available production times, etc. Although this'follows inherently Filipino values,J/ it is clear that the extension of this practice in managing production systems would resul" in sub-optimal schedulinonf m;lnufnri L . ..-..-..,turing activities.
1-.
P 1 I I
It can be observed from Exhibit 19 that the production planning process commences with either a set of accumulated job orders (for intermittent type of manufacturing activities) or the existing reduction capacity of the firm. The production capacity (actual and/or rated! can be a "filter" for jobs that the firm can accommodate on aone-shiftormultiple shift basis and/or those subcontracted to other shops. The jobs which are found acceptable in terms of the available capacity will be converted into production forecasts, which are normally expressed in quantities. Using a set of technical drawings, product specifications and/or a sample product as basis, the materials needed are listed and the total requirements estimated. The initial estimates of the raw materials (direct and indirect) should be adjusted to take into account factors like spoilage, wastage, economic order quantities, re-order points, scraps, existing materials inventory, etc. Process planning then succeeds the materials billing step. Here, the types of machinery needed for the manufacture of the product,as well as the estimated machine-hours required per process,need to be listed. Some form of "standards" usually based on similar or past jobs will serve as a basis fo estimating the total machine-hours required. This initial estimate of machine-hours may be adjusted later in consideration of such factors as potential machine breakdowns, repairs, irregularities in the power supply, availability of operators, etc. After process planning comes man-hour planning. The manhour planning process begins with the identification of all the areas of production where manpower inputs would be required. The man-hour estimates per process should be made using some rough forms of standards usually based on the estiynior'.s/ workers' experience levels, absenteeism, moodiness, tardiness, etc. outputs of the materials billing, process planning and man-hour planning procedures will serve as inputs to the master schedule board. The master schedule board will contain all the necessary information regarding the job orders on hand, job orders in process, jobs to be completed and so on. A generalized model of a production planning sheet for a job order and an example of a master schedule board are shown in Exhibit 20 and 21 respectively. In filling up the item "process required 11you must clearly state the entire sequence of manufacturing in practically all the details needed. This part of the plan will serve as the basis for the raw materials flow and requirements, the machine-hours needed and the man-hours to be allocated. After considering capacity, availabi!ity and otiieradjustment factors, you may now start the scheduling processi The objective of scheduling in I
- 148 -
EXHIBIT 19 A Sir
a----
1 I I
------e-wI I
------
1 , I
- 149 -
Production Sheet ---m--v-- Planning --Job Order No. Customer: Address: Contact: Product/service description: Date Received: Volume needed: Date needed: Other Information: -
Summary: A piece of the product or service would require the following production inputs:
a. b.
C.
Quantity Required
Adjustments
Prepared by:
Verified by:
Checked by:
Product specifications
Machine-Hours Estimates (4
Remarks (4
Adjustments
b.
Machine-hours estimates:
C.
Man-hours estimates:
.-
Exhibit 21 A Generalized Production Plan for a Job-Order Manufacturing System birst Machine Loading Date
I--
Date Received
Date of Delivery
Quantity Required
Materials Required
Production to Date
- 152 -
manufacturing, whatever the scale or size, is to prepare, allocate and make available all the necessary physical inputs needed in the "creation" of goods and services* in order that: 1. 2, All job orders received are executed within the least possible time. Promised dates of deliveries are estimated based on information.
3. A continuous supply of work is kept ahead of each of the processes to be performed. 4. Plant supervision can be minimized.
An example of a generalized production plan for a job order system is shown in Exhibit 21. Production plans must not be too rigid especially among plants employing the job order system so that necessary revisions may be made if any of the following occurs: 1. Need to add a new product(or job order) to the existing one.
2. Changes in the design of the product which may result from rationalization or standardization efforts, product adaptation, cost effectiveness schemes and productivity studies. 3. Need to reduce production cost per unit through greater utilization of existing facilities. 4. 5. 6. 7. Obsolescense of processes , equipment and methods. Need to minimize labour and/or materials costs. Need to prevent increased investments in machineries/equipment. Need to enhance effective supervision and production control.
The task of revising the production plans may be implemented in three ways, namely: 1. Periodic adjustments for small manufacturinq olants that change products and accept job orders at a fairly definable period, i.e., annua lly, monthly, etc. 2. Continuous adjustments t'orsmall manufacturing firms employ ing job order systems with very short production cycles. 3. Accidental adjustments upon discovery by production personnel of new methods or improved processes in the course of production. After production plans have been adequately prepared, the next major task would be to ensure that unnecessary and undesirable "surprises" or unexpected happenings are avoided while implementing the plan. This falls within the realm of pnodutin con-&ob.
Basically, p/roducf;ian co&&involves the regulation, synchronization and coordination of all the manufacturing activities so that timetables can be met and plans carried out with optimum efficiency and economy. All manufacturing companies, big and small, ale beset by any or all of the following problems: 1.
7
requirement. product.
L.
How to reduce production cost to ultimately reduce the price of the How to maintain a minimum level of capital investment, How to smoothen the production cycle.
3. 4.
These problems may seem insoluble since they appear to be inconsistent with one another. Salesmen and other marketing staff clamourfor quick deliveries; production personnel ask for more time; and finance people fight for the reduction of capital expenditures. Production control aims to sychronize all the activities concerned with production, in order to meet delivery dates and achieve the lowest cost and right quality with a minimum of capital in.vestment. As in any other form of managerial control, the basic elements of a control system must be present in production control. These are a subjeti 20 con.O~o~, a clew&g dohm, the p~oduc.tion pJ?aM, (standard) ptroductionwmimce hepobt6, pertiota hupon&ib& and UJWU to be.con&o&Led. Exhibit 22 shows the basic structure of a production control system. There are two basic production control systems: ohdeh COLOLO~ and &W cotio%. These two systems exist because there are generally two types of manufacturing However, it is difficult to strictly and .itiMlznt. processes : conUu~ow classify companies according to type of manufacturing process since some companies are using both order and flow control systems. The first thing to do to determine the type of production control is to investigate the characteristics of the manufacturing process.
1.
a. b.
C.
A manufacturing firm uses the intermittent manufacturing process: for multifarious variety of products per order. for small quantity units that are seldom reordered.
if the company makes use of all-purpose machinery and equipment in the processing of its products.
l-4 if t>,c$;a[lt is laid out on the has's of the production process. W. e. if the manufacture of products are based on past sales records.
Exhibit
22
.-
uction To Date
Depts.
Production Target
Production to Date
Mr. Sorisno
Causes of the
if the plant is departmentalized by product. if special pl'rposemachines are economically used. when the company fills a long-term contract on the when production is for a stock of products. sale of its products.
d. e.
Here, flow control is applied. Relative to the production systems used, the job order or the service manufacturing production system makes use of strictly inte*:qiittent schemes. The mass production system is somewhere in the middle and may be classified as intermittent or continuous depending on the degree of The process production system, on the other hand, makes use application of the continuous manufacturing scheme. The intermittent manufacturing scheme is widely applied by small and medium-sized industrial plants. The control function cannot be complete without the monitoring function. Here, we are interested in the "deviations" of the actual production with the planned production runs. These deviations must not only be measured and identified; their causes should be pinned down as well. Exhibit 23 shows some examples of production monitor charts which can be applied to small manufacturing plants. IMPROVING PRODUCTIVITY IN SMALL ENTERPRISES
As illustrated earlier in this chapter, the production system is v iewed as an input-output device. In so doing. we can clearly see the relatiunship of the different production factors with phc~ductivtilj. Producti, '1,~ is expressed in terms of the ratio of the output to the input. Assumin, lerefore, that sets of inputs and outputs could be quantified in terms of 1 unified unit, the productivity of a production system is estimated by using tiis relationship: Productivity = ,
E$F
Evidently, the proc!uctivi?yof a certain set of inputs is the amount of goods or services (outputs) which are produced from them. The following are examples of inputs: 1. Matehiaen - Stuffs that can be converted into products to be sold. They include chemicals, fuels for use in the process of manufacture and packaging materials.
Exhibit.23 Example A Examples of Production Mon itoring Charts Production capacity time (one shift) Production (in units) deviations i I I ; I I I ' Planned production Actual production Dn MONITOR CHART Time (in days) Production (in units) Example I B Cumulative actual production Planned ,/production
D1
D2
D3
D4
D5
D6
Job Order
xxxx8
- 157 -
2. MRCkinclb - Plant equipment and tools necessary to carry out operations of manufacture and the handling and transport of materials; heating, ventilating and power plant; and office equipment and furniture. 3. McwlpoLuetr Men and women to perform the manufacturing operations, to plan and control, to do clerical work, to design and do research, to buy and sell, etc. The inputs of the production system are "real" things or services. When these are used up in the process of production, "real" costs are incurred. These costs may also be measured in monetary terms. Since higher productivity means more output from the same resources, it also means lower costs and higher net money return per unit of output. Asa small entrepreneur, you should always see to it that all your resources are used optimally to achieve the highest productivity. Your job is to balance the use of one resource against another and coordinate the efforts of everyone in the organization to achieve the best reszllts. The productivity-conscious manufacturer will do well to seek the assistance of industrial engineers and other work and methods study experts.
- 158 -
CHAPTER
VI
FINANCIAL MANAGEMENT
A basic undwtinding 06 &Lnanciae management concepti, and too& Ls &npcrtin~Z to the AmaLt evLtnephenw wlw uuti to inclreabe kis ~JLO ,$L& and Xo ew,~~e Xhe longtuzm ~~~vivat 06 h&s bunined4.
applroacheb
The ba&c too& 06 &kanciae manugemwt .&&de co& bud ting and capa budgtig . AU thae Itoo& not only 2 eRp Xhe cn-&eprrenewL in axYai&ng ti p/raQXab&Xy go& bti a&o in@Tuence planning and decision making on wLtal ques~iovrd nuch a~ phoducaZ p&icing, acqu&Ltion 06 neuf ,(acX.Lties, and bu..Gnedcl div~i&Lca.Govr
accounting, and expan?lion.
The boundtin 06 good (inanciae ace&e @iinciae indohmcttion
management .ih adequa.teand Good h02Ohdh err hecohd.3. keeping ti VGLL~Z the wccen~&& openation and management ti 06 .the &em. 1-t a&o a.& in the de&ion making wocens and
w.t#Lpki4&5.
FLnaUy, the eM;theyJheMew ti cationed again& a Numberr. OX &Lnunciae management ~.JX@& commonly encotiehed among nmall
A business can only survive if it generates enough profits. The small entrepreneurs can only maintain or increase profit if he knows the elements that effect profitability, as well as the techniques to achieve acceptable returns on investments. To be sure, the presence of an adequate product demand and technical competence are essential pre-requisites to business success. However, as the enterprise grows it becomes increas.inglyimportant to take the area of finance seriously. Now, your business may seem to be making money. But take a closer look. What steps can be taken to control cost? to offset inflationary pressures? finally, to increase profits? Regardless of 'the condition of your business, chances are you can do better than how you are doing now. As small you have generate whenever entrepreneur, you are probably also your own financial manager. As such, the responsibility to manage the resourcesor assets of your business to optimal returns. It is also your task to look for sources of financing, necessary, at the most favourable terms.
This chapter shall provide a basic unbarstanding of financial management concepts, approaches and tools to help the smal. entrepreneur to be a more effective financial manager and to enhance the profitability of his business.
Assets, by definition, refer to the things of value owned by the business. This definition, therefore, excludes personal assets and worthless property. Assets are of two major types: fixed assets and working capital.
Fixed ads&: include plant, equipment and other facilities used in business operations. Plant site, if not leased, is one of the major investments of a business. Land held for speculative purposes, however, is not a fixed asset.
Plant or building is another fixed asset. It is also a major expenditure at the initial stage of the btijinessas well as when it decides to expand. Major improvements on existing builaing and premises are classified as part of fixed assets. Equipment ircludes machinery and other apparatus utilized in the production of goods and se;*rices. Examples are production equipment, transportation facilities, material handling devices and other support facilities. Wo&.ing ccip&~X is the "lifeblood" of the business enterprise. If this "flow of blood" is impaired, then the enterprise cannot keep going. In any business, in adequate and reasonable amount of working capital must be maintained at all times. A minimum cash balance has to be set aside for day-to-day cash operating and manufacturing expenses. Inventories, in terms of raw materials, finished goods and work-in-process, likewise, must be provided for. Investment in good accounts receivable also forms part of working capital level. The flow of working capital in a business enterprises is illustrated in Exhibit 1. Exhibit 3 Working Capital Flou
Work-in process
Hccounts receivables
Finished goods
- 160 Creditors or those who provide financing for the required resources or assets are interested in the liquidity position of the business. Liquidity is simply the ability of the business to pay its debt. On the other hand, you are not only concerned with the liquid resources of your business but will want to program your fixed asset acquisition and to see to it that these physical resources 3re put to good use. ?he current assets of your enterprise are those classified as part of the working capital. They are current, in the sense that these are constantly in a state of change, i.e., they are converted from one state to another during the normal business operation. For example, cash is converted into raw materials and in turn into finished goods. The immediate liquidity, therefore, of an enterprise is measured in terms of the speed with which the working capital revolves. For example, problem trade accounts receivable will have immediate effect on the ability of the enterprise to pay its liabilities on the dates they are due. If we evaluate the working capital of an enterprise in terms of liquidity, cash will, of course, be the most liquid. This is followed by accounts receivable, temporary investment, inventories and other current assets. Fixed assets on the other hand, possess physical characteristics and therefore, havelong term value. 4s previously mentioned, plant and equipment are the main components of fixed assets. As such, their usefulness will extend over a long period of time. Considering the large investments in fixed assets, there is a need to maximize their use. Low productivity, therefore, would result in liquidity problems and ultimately in unprofitable operations. CASH MNAGEMENT This is the most basic of all the assets and as previously mentioned the most liquid of the working capital. Cash consists of cash on hand or in the bank. Inadequate cash results in the inability of the firm to pay its bills, salaries
- 161 and other financial obligations. The need for it may hit the business at any time even when the business is doing well. The increase in sales will require. a corresponding increase in cash for raw materials, salaries and other expenses. Other assets may be in good condition, but there is no substitute for cash. You cannot pay off your obligation with account receivable, inventory or with capital assets, can you? Cash management is essential to the successful operation of your business. The cash position at any given time is a significant index of your firm's ability to grow. In times of prosperity and expansion, there is a need, more than ever, to watch your cash carefully. Unfortunately, the average small entrepreneur tends to be complacent when things are doing well. A study of cash needs is likewise often neglected because entrepreneurs think it is difficult and costly. Other assets include organization or pre-operating expenses, which are incurred during the organization phase of the business, and long-term pre-payment or deposits, which are liquidated over a period of more than a year.
1.
Poor.internal control.
2. Lack of cash planning. If you fail to plan your cash requirements, you find yourself running short of money in the course of operations.
may
3. Civersion of funds. It is unwise to use working capital funds for purchase of machinery and equipment. In short, use the money for the purpose for which it is intended. 4. Poor collection of bills. First of all, an entrepreneur must make inquiries about the company it extends credit to. Otherwise what guarantee will he have that the bills will be paid on time? A regular follow up on collection of bills must be maintained and a time limit specified in which all bills must be paid. 5. Lack of expense control. Expenses must be balanced to the level of production. This is done by preparing an expense budget. The entrepreneur will then know that he is spending the right amount on administration, selling and other overhead expenses.
Sa~egimding
cmh
Once cash items have been classified accordingly, the entrepreneur has to keep close guard of his cash because it is the easiest form of wealth that can be stolen. Cash can either be:
1.
2. Misappropriated as an item accompanied by a manipulation of records or documents to cover up for the loss.
- 162 The following are some ways by which records may be mani pulated to conceal the theft: 1. Deliberate commission of error in adding figures in the books of account to cover cash shortages 2. 3. 4. 5. Recording duplicate or False purchase expenses vouchers Entry of names of non-existent persons in the payroll (padding or overloading) Forging of documents Writing off assets to sales discounts
6. Lapping, which means concealment of shortage by delaying the recording of cash receipts. 7. Kiting - e.g., chequein one bank (A) is deposited in another bank (B) and the amount of the chequeis not shown a, a deduction from the balance in bank (A) at c the date of transfer. 8. Keeping cash in the establishment contrt0.t bmaU in e.vLtwijJtieb
ItimcLR
Internal control is a system of checks adopted within a business to safeguard its assets, especially cash. This contrcl usually provides that the work of one person will be reviewed and examined by another. lhe application and adoption of the principle of internal control will vary from firm to firm depending on the size and facilities of the enterprise. It would range from the elaborate internal control system of a big industrial complex to the small internal control system of a five-man industry. The following are internal control applications of common use to small firms: Business and personal funds. Business and personal funds should be kept apart because business plans cannot be effectively organized if non-business activities are combined with them. It is difficult to prepare and file the required government reports, including income tax returns, if both business and personal funds are combined.
1.
2. Deposit of cash. Deposit cash collections in the bank intact on the day it is received. If customers send cheques by mail, someone other than the bookkeeper should be designated to open and inspect the incoming mail before it is distributed. Small entrepreneurs have found it practical to scan the mail and separate the envelopes containing cheques. Simple and effective control overcheques received by mail can be maintained if a list ofcheques received is kept and the total is compared to the amount recorded in the bank deposit slips for the day. Any difference calls for an investigation If it is not practical for the entrepreneur to do this, he should assign someone other than the cashier to list the cheques.
- 163 -
3. Imprest petty cash fund (contingency cash). Establish a separate petty cash fund sufficient to cover small expenses. It can, for instance, maintain a fund of $500.00. This fund can pay for postage, transportation expense, purchases of small supplies and similar items, eliminating the need to writecheques for very small purchases. The total of the money in this cash fund plus the receipts for expenditures should always equal the imprest amount, in this case $500.00.
When the fund balance becomes low, list the expenses in detail and draw a cheque payable to the custodian of the fund for reimbursement. The reimbursement cheque should be charged to the appropriate expense accounts. All supporting documents should be marked "Paid." This will prevent subsequent reuse to obtain funds by deceit and misrepresentation. 4. Reconciliation of bank accounts. A very simple but quite effective protection of cash is done through the reconciling of bank accounts by a qualified person other than the cashier. The owner, should review regularly bank reconciliations along with the bank statements. By so doing, he becomes familiar with the status of his funds. He is then assured that the reconciliation is carried out properly. (See Exhibit 2 for an illustration.) 5. Disbursements. Signing ofcheques and bad debts must be approved by the ownermanager and not by the persons handling cash and posting records. Review of disbursement documents supplies a positive internal check which results from the owner's intimate knowledge of the business. Vouchers should be pre-numbered and records ofcheques issued should be maintained for reference and control purposes. The entrepreneur should review and approve bad debt write-offs. This will keep him informed of accounts charged off. This will also prevent an employee from pocketing a customer's payment and writing that account off as bad debt. 6. Tax money as liabilities. To control funds collected from employees, customers, or others like contractors, the owner should see that all tax returns are filed and payment are made. Here is an example: One company failed to remit to the government tax collection agency the taxes withheld from employees. The company, of course, failed to treat this tax money as a liability. The availab-lecash was used in expanding the busines,s. The tax agency investigated and discovered that taxes withheld had not been remitted. The company was ordered to remit the whole amount.
In the given example, the tax agency's order can possibly lead the company into bankruptcy especially if the amount involved is big.
The important thing to remember is that the money deducted for withholding tax belongs to the government. The law requires that withholding taxes should be remitted to the government tax collection agency. This tax money must be remitted on time so as not to build up a backlog which may prove harmful not only to the cash situation but to the business in general. 7. Annual audit. An annual audit helps prevent frauds. The fact that an audit is conducted each year may discourage trusted employees who may otherwise be tempted to embezzle funds from the business.
- 164 -
Balance shown per bank statement Add: Deposits ii1transit: xxx xxx
xxx
Date:
xxx
Deduct:
Check No.
xxx XM ---
Balance as shown per cheque book: Deduct: Bank service charge Others Adjusted cheque book balance xxx xxx
xxx
xxx
&Gig
- 165 8. Bonding of employees. A fidelity bond is a type of insurance. It provides money which is paid back to the company for losses. To be assured a firm is properly and adequately covered, the coverage should be reviewed with the insurance agent. Cad budgeting ~Y&CVM
Besides safeguarding cash, the other important feature of cash management is cash planning or cash budgeting. In simple terms, cash budgeting is the process of planning the receipts and disbursements of the firm to determine cash requirements and cash surpluses. It is probably the most important single tool for business control. A knowledge of present and future cash balances would put the entrepreneur in a better position to: . . Take advantage of money-saving opportunities , such as discounts, economic order quantitites, and so on Make the most efficient use of cash Finance his seasonal business needs Develop a sound borrowing program Develop a workable program of debt repayment . . Provide funds for expansion Plan for investing excess cash Estimating cash inflows
1.
In estimating cash inflows, the terms of the credit extended to customers is considered. If a two-month credit is given to customers the amount of credit sales in November of the preceeding year will be the cash collection in January.
- 166 Cash sales are also estimated based on historical data. An increase may be provided depending on the economic situation and the type of business. Additional investment from the owner and proceeds from loans may be included. 2. Estimating cash outflows
oiitfj CvJS 1 .
. . . . . . . . 3.
be remembered in estimating
cash
cash purchases credit purchase payments salaries and wages advances to employees administrative selling and overhead expenses prepayments, like rentals loans and interests taxes other expenses Effect of depreciation and non-cash items on cash inflows
Depreciation is a cost charged against fixed assets (e.g. building, machinery and equipment) that must be deducted from the revenue to arrive at correct income for the period or year. Charges to income for depreciation do not affect the total inflow of cash from operations. However, the allowance for depreciation expense as a deduction from income subject to tax have an important effect on the outflow of cash necessary to satisfy tax requirements. For example: Gross profit Less administrative and overhead expenses Depreciation Net profit subject to tax
If depreciation was omitted, the net income subject to tax would be higher by $2,000 and accumulated earnings for succeeding years will be overstated. Apart from depreciation, there are two other non-cash items. and amctization. These are dep.&W~~
Depletion is that portion of the cost of assets like salt, gravel, oil, gas, minerals, etc. allocated to the unitsextracted therefrom.
- 167 Amortization is that portion of the intangible assets costs charged off for the period. Examples of intangible assets are patent, goodwill, copyright, trade mark and organizations costs. 4. Preparing a cash budget
fiCfer,%rf;vvA'-- Lf!C'Ld>:: iows and outfiows, the next step is the preparation " ;nt of a cash budge;. This is a plan which indicates the cash receipts expected to be rececved and the expenditures expected to be made in a given period. Using figures from the sales forecast and operating budget, a detailed month-by-month forecast of cashecpected to be collected and spent is prepared. Cash receipts and disbursements are forecast to determine future monthly excesses and shortages of cash and to foresee the likely timing and duration of peak cash requirements. A simple format of a cash budget for a small tr?nufacturingenterprise is shown in Exhibit 3.
s.
A daily summary of cash will provide information as to the current cash position. This summary should show balance at the beginning of the day and deposits, payments and balance at the end of the day. An example is shown in Exhibit 4. vmg tA!i&z cash LJloJLtagu
If the cash budget shows certain shortages, it is time to get additional cash first, from internal sources and, if this is not sufficient, from additional sources like banks and other financial institutions.
- 168 -
Exhibit
EXPECTED 2. 3. 4.
CASHRECEIPTS
Idget!Actual I
i !
January
February Idget:Actual I
March 3udget;Actcal I
I
1.
Cash sales Collections on accounts receivable Other income Total cash receipts
I I I
I I 1
EXPECTED CASH PAYMENTS 5. 6. 7. 8. 9. 10. 11. 12. Raw materials Payroll Other factory expenses Advertising Selling expense Administrative expenses New plant and equipment Other payments (taxes, repayment of loans, interest) 13. Total cash payments 14. EXPECTED CASH BALANCE beginning of month 15. Cash increase or decrease (item 4 minus item 13) 16. Expected cash balance at end of month (item 14 plus item 15) 17. Desired working cash balance 18. Short-term loans needed (item 17 minus item 16 if item 17 is larger 19. Cash available for short-term investments (item 16 minus 17 if item 16 is larger than item 17.)
I I
I I
I
I
I
I
I
- 169 -
4 Report
Opening cash balance Plus: deposits Cash sales Accounts receivable Others Total cash available Less: Disbursements Cash purchases Accounts payable Payroll Miscellaneous expenses Closfng cash balance xxx xxx xxx xxx xxx xxx xxx --
xxx
xxx xxx
xxx
xx4
1. Tightening trade relationships. You may not always think of your various trade relationships as source of cash. Yet, they can be. The following are some poss
b . Collection schedules. Earlier payments may be arranged with your customers to augment the amount of ready cash.
C. Payment methods. Progressive billing far completed portions of an order, may be another arrangement acceptable to customers. Under the latter arrangement, a customer, in effect, finances part of the firm's future production which is intended for him.
2. Watching receivables. Tighten credit and collection policies in order to reduce the outstanding amount of receivables and increase cash inflows. 3. a. Watching inventory. This can be done by;
b. Purchasing components.,parts, snd even subcontracting services from other manufacturers. Deferring payments to suppliers until such time that payment for finished ioods are received. In this case, depletion of ready cash is avoided. Prompt payment discounts, of course, should not be overlooked. 4. Watching work-in-process. The entrepreneur must carefully check work-inprocess. Some of it can be brought to completion and sold ahead of schedule. If this speed-up is economical (if it does not mean a large outlay for overtime pay), he can quickly pump in ready cash into his business.
- 171 5. Watching backlog. Production can be increased significantly so that orders can be shipped faster than anticipated. However, the entrepreneur must not forget to obtain new orders, too. 6. Watching the bank account. Scattered accounts in one bank may be consolidated in order to minimize service fees charged for below minimum accounts, or to reduce the idle minimum amounts (kept in the bank to avoid service charges), thus utilizing funds for operations or investments. On the other hand, sources of external financing include:
1. Credit lines. One source of external financing is through credit lines. Credit lines have advantages: they may be obtained through good relationships with the bank; are flexible; and are relatively cheaper than other types of loan because the risk involved is low and it is always covered by collateral. Interest rates vary according to the terms and conditions set by the Central Bank of the country.
The disadvantage of credit lines is that they are available to meet only shortterm needs.
2. Suppliers. The entrepreneur can make an arrangement with his suppliers who may allow him to stretch his payment schedule, so that h#?can always maintain a certain level of cash on hand. Letter of credit. Another source of cash is through letter of credit, which is an authorization by a bank to a seller to draw on it fur funds within a stated amount and time, in payment for specifiedgoodsto bc shipped to the buyer abroad or within the country. This authorization proceeds from an order of a correspondent bank abroad or in another part of the country in which the buyer has deposited or will deposit an equivalent amount in the local currency. When the goods have been delivered by the seller or exporter to the inland carrier (FOB) or to the port of exit (FAS) in accordance with the terms of the letter of credit, the documents evidencing the type and quantity of goods delivered are presented to the bank after which payment is made to the exporter/seller. (Refer to Exhibit 5 for the flow process of documents and remittance through letter of credit).
3.
Say, contract for export 1,000 jeans valued at $10,000 Exporter (supplier) 1
I
biki i,,;tl
Importer
(buyer)
\\ / \ I/ I 7
Ships to buyer
-,Forwards
L/C--..--
i -----
---_-_
_____
DA :
Delivery of documents to buyer against acceptance undertaking to pay bill on due date.
That is,
- 173 4. Short and long-term loans from banks/financing institutions. Entrepreneurs canavailofloansand/or loan assistance from the various financial institutions in their respective countries. (See Appendix 3 ). MANAGEMENT CIFACCC)WTS RECEZVABLE The level of accounts receivable is determined by two factors: the volume of credit sales and collections, and the average period between sales and collections. However, there are three major variables that have to be considered in credit and collection.
By granting credit only to a few selected customers, the entrepreneur will avoid bad debt losses. On the other hand, the firm is liable to lose sales by so restricting credit and the profit foregone on lost sales could be more than the costs avoided. In determining the optimal credit standard it is necessary to equate the marginal costs of credit with the marginal profits on increased sales. Marginal costs here include bad debt losses, investigation and collection costs and higher cost of capital because money is tied up ,inreceivables.
Since credit cost and quality of credit are correlated, it is important to be able to judge the quality of an account. Quality is defined in terms of probability of default. The following factors must be considered in evaluating credit worthiness:
1. Character, refers to the probability that a customer will pay his obligations. This is very important because every transaction implies a promise to pay.
2. Capacity refers to the subjective judgment of the ability of the customer to pay his debts. This is measured by his past record, supplemented by physical observation of the customer's business operations.
- 174 3. Capital is measured by the general financial position of the firm as indicated, for instance, by a financial ratio analysis, with special emphasis on the tangible net worth of the enterprise. 4. Collateral is represented by assets that a customer may pledge as security of the credit extended to him. 5. Condition refers to the impact of general economic trends on the firm, or any new developments in certain areas of the economy. Based on the above factors, customers and/or potential customers may be ranked before a decision is made as to how much credit risk your firm should take.
Tetonb 06 Cnc?dit
The terms of credit should specify the period for which credit is extended and the discount, if any, given for early payments. For example if your company's credit terms are stated as "Z/l0 net 30," this means that a two percent discount from the stated price is granted if payment is made within ten days, and discount is not taken if paid within 30 days from the invoice date. Liberalizing the credit period stimulates sales, but there is a cost of tying up funds in receivables. The effect of giving cash discounts is to induce more customers to pay cash rather L::anask for or avail of credit. Cofisfion pa&icy
This refers to the procedures a firm follows to obtain payment of overdue accounts. For example, a letter may be sent out when the account is ten days past due; a more severe letter, followed by a telephone call, may be used if payment is not received within 30 days; and the account may be turned over to a collection agency after 90 days. The collection process can be expensive in terms of out-of-pocket expenses and lost goodwill. A balance needs to be struck, depending on the situation. Ag.ing06 hmLiviZb~ed Another very important technique for keeping track of your receivables is the aging schedule. In the aging schedule, the accounts receivable are classified according to the date of sale and summarized as in the following example: Receivable outstanding less than 30 days Amount $22,610 Percentage
70 11 11 6 2 100
Aside from understanding the concepts of efficient management of assets, you should be aware of the basic tools of financial management. These tools help you reach your profitability objectives as well as enable you to run your enterprise with some degree of professionalism. As a small entrepreneur, you are faced with the problem of how to cost your product for pricing. In most cases, costing is based on imprecise estimates. Furthermore, intuition, rather than facts and figures, dictate a decision to acquire fixed assets. Pre-occupation with day-to-day operation and business routine lead to a failure to plan. This may result in an inability to cope with changes in the business environment when adverse conditions happen. A misunderstanding of capital investment concepts may bring about over-expansion of underutilized facilities. All these shortcomings which often cause business failure may be avoided with a thorough understanding of financial management tools: cost accounting, budgeting, budgetary control, and capital budgeting. COST ACCOUMlNG The term cost may be defined as the total valuation of all expenditures incurred in connection with a specific activity such as the manufacture of products and the provision of services. Essentially, cost accounting is concerned not with the overall results of the business but with the efficiency of the various sections of the business. The primary objectives of cost accounting are to determine product costs as an aid to pricing and to control the cost of business operations by associating costs with centres of responsibility, comparing actual with planned cost and taking corrective action. Product costs are determined by relating prices paid for materials, labour and overhead expenses to some unit of output or accomplishment. Product cost information influence pricing decisions. It also provides a basis for inventory needed to measure periodic business income. Controlling costs is a part of your responsibility of carrying on the functions of a business efficiently and economically. Knowing the cost of making a product, performing a manufacturing operation or carrying on some functions of a business is a starting point in control. By comparing detailed cost data with budgets, standards and other yardsticks, you find a basis for controlling costs and planning operations. The field of cost accounting is rather broad. This handbook will therefore discuss only those concepts and application most appropriate to small businesses.
The cost of any product consists in genera 1 of three elements: direct materials; direct labour; and manufacturing overhead. Each element has two aspects, namely quantity and price.
- 176 1. Direct materialscost is the cost of materials incorporated in the product and measurable as such. Certain minor materials, such as glue or nails, may be considered as either supplies or indirect materials, because of impracticability of assigning these items of specific units of product. Moreover, the cost per unit may be too insignificant to measure as direct materials cost and may then be classified under manufacturing overhead as indirect materials cost. 2. Direct labour cost is the labour cost directly traceable to a specific product, like the salaries of machine operators and assemblers. Labour cost that. cannot be traced to the product is included as part of manufacturing overhead as indirect labour. Indirect labour includes storemen, foremen, transport drivers, office clerks,inspectors, managers and others. 3. Manufacturing overhead cost. This refers to factory costs other than direct materials and direct labour. Included under manufacturing overhead are the cost of indirect materials, indirect labour, depreciation, repairs, maintenance, heat, light, etc. These costs are sometimes called costs of capacity, whereas direct materials and direct labour are often known as costs of products or prime costs. Conversion cost consists of direct labour and factory overhead. There are two major types of factory overhead: Variable factory overhead - The main examples are supplies, power, and Zepreciation, if the computation is based on units of production. b. Fixed factory overhead most indirect labour. Examples are rent, insurance, property taxes and
1.
Job-order costing
Under a job-order cost system, cost is associated with a job. The cost of raw materials, direct labour and factory overhead applicable to each job is compiled and divided by the number of finished units in the job to arrive at average unit cost. This method is used by companies whose products are readily identified by individual ur'ts or batches, each of which receives varying degrees of attention or skills. Sometimes selling and administrative overhead is charged to job costs, as a percentage of manufacturing cost, to compute total job cost. Industries which commonly use job order methods include construction, printing, aircraft, furniture and machinery. f'orjob-order costing, the job itself is the focal point for cost identification. The costs are assigned to the jobs passing through the plant and recorded on forms called ia6 co& bhee,tb, as shown in Exhibits 6 and 6-a. From an accounting viewpoint, the job cost sheets represent individual pages in a subsidiary cost of ledger. Each job cost sheet is usually divided into three basic sections: materials, labour and overhead. These three cost elements are accounted for separately.
- 177 -
Exhibit
Job Cost
Sheet
t'or -.Product
--_--
Date wanted
Date
Dept.
Req'd
NO.
Stores no.
Quantity
Total cost
Direct Labour Date' Dept. Time card no. Description Hrs. or Rate PCS. Total cost
Summary for Order no.Direct Materials Direct Labour Applied overhead Total factory cost Factory cost per unit --
- 178 -
Exhibit
6a Sheet
Job Cost
For
Prcduct
Date wanted
Sumnary for order no, Direct materials Direct Labour-. Applied overhead Total factory cos Factory cost per
- 179 Weh&&~uLGaXons provide the basis for charging direct materials to a job (See Exhibit 7). In the materials section of the job cost sheet, space is provided for the description or types of materials used and quantities are given along with the costs. The basis for charging direct labour to a job are job time tickets or cards as illustrated in Exhibit 8. Usually each worker has one time card for each job. The rate and the total hours consumed by the workers are entered into the job cost sheet with the corresponding costs. Predetermined overhead rates, obtained from a forecast, are used to allocate the appropriate amount of factory overhead cost to the job. The factory overhead rate for a job can be determined by: a. b. Computing total overhead cost for the job Selecting a measure of activity
C. Dividing the overhead cost by the measure of activity to compute the overhead rate.
Activity for overhead rates may be measured by on1 a. b. Direct labour cost, or Direct labour hours, or Machine hours, or Prime cost. r more of the following:
C.
d.
A section in the job cost sheet is usually provided in which a summary of costs is shown and the unit cost is determined. This section is completed as soon as the job is finished. The use of predetermined rate raises the question of what to do with the difference between the overhead applied to production and the overhead costs actually incurred. If the actual overhead allocated is less than estimated, there will be a balance of overhead not charged to jobs. This is known as undachovrged overhead and this may be carried as additional asset value in inventory, since it may tend to fluctuate from month to month. Conversely if the actual overhead exceeds estimate, there will be an ovehchLuL& overhead. Inevitably there will remain some difference between overhead incurred and applied at the end of the year. In reporting net income for the year on the basis of costs actually incurred, the final net difference (either over or undercharged) will be considered as an adjustment to cost of goods sold in the profit and loss statement.
- 180 -
Exhibit
Materi'als Requisition
Requested by
Stores no.
Quantity requested
Description
. issued
Qty
Unit cost
Total cost
Received by: -
Date:
Exhibit Job
Time Card
Name Department
Date
Machine no.
Time started
Time stonped
Total hours
Wag& rate
Total
cost
Approved by:
- 182 2.
tinder
Process costing
a process cost system, the focal points in costing are th:! various departments or processes in the production cycle, The cost of raw materials, labour and manufacturing overhead applicable to each department or process for a given period of time is compiled. The average cost of running a unit ofproduct through each department is determined by dividing the total departmental cost b.ythe number of units processed during the period.
Process costing is used t?ycompanies,during continuous flow of similar products such as chemicals, oils, textiles, paints, paper mills, flour, canneries, rubber, steel, glass, food processing, mining and cement. The advantages of a process cost system are: a. b. Costs are computed per'odically, usually at the end of the month. Arerage costs are cl;lculatedeasily, provided the product is homogeneous. Less clerical work and expense are involved than in job costing.
C.
However, there are problems and disadvantages which includes: a. Where the process costs are historical costs, they are not determined until after the end of the cost period. b. Average costs are not always accurate because the units are not fully homogeneous.
C.
Where different products are manufactured, the pro-rating of joint costs is necessary and the computation is made more difficult.
system is that it compiles data in a The main advantage manner that is most useful in the administration of certain kinds of business. However, it is an expensive systemto operate because it involves considerable detailed clerical work. It is important that job costing is only used in situations where it is necessary.
3.
In contract costing, labour, materials and other costs are direct contract costs. Overhead expenses are charged to contracts on an appropriate basis. The actual cost of the contract may be compared with the budgeted or estimated costs as a control on the: a. b. Profitability of the job Efficiency of operations Accuracy of the estimates
C.
- 183 Usually, profits are ignored on contracts not yet completed. iiowever, it is advisable to credit part of the profit earned each year for contracts that will last for several years to avoid profit fiuctuation. On the other hand, batch costing is job costing for a group or batch of identical products. One example is costing for garments manufacturing. Ap@&Xia~s After discussing the concepts we shall now deal with applications. The following problems frequently encountered in manufacturing activities have been chosen to illustrate cost accounting applications.
1.
Initial costs
The difference in units betbeen the normal level of activity and thenactual level of production multiplied by the fixed overhead cost rate represents the amount of loss because of the condition previously discussed. Two distinct situations of initial idle capacity using a. Underutilization of plant capacity during the take-off period stage. Anticipated demand eventually will maximize available capacity. 5. Idle capacity as a result of a decision to choose a higher plant capacity to anticipate expansion. The firm may decide to invest in plant capacities now than in the later years in anticipation of inflationary cost on capital investment and better products. Example: A plant has been built for a sales volume of 10,000 units. In the first year the demand is estimated to be 6,000; and in the second year, 7,000 units. On the third year the normal sales volume is reached. The normal fixed overhead costs with a volume of lO,OO@units are $500,000. The variable cost per unit is $60. The plant has a life cf 20 years. The initial costs are computed as follows: Idle capacity cost first year
(10,000
- 6,000)
500,000 10,000
S200 ooo ,
year 150,000
$350,000
500,110o =
10,000
TOTAL
- 184 Total units to be produced during the life of the plant are 300,000 units, the initialcost is $2.00 per unit; the total costs per unit are therefore estimated . atVariable Fixed $60.00 50.00
Initial
-- 2.00
$112.00
BUUGETTNG AhV BUDGETARY CGNTRQL An essential quality of the successful entrepreneur is foresight. You need to know about how the enterprise will fare in later years in monetary terms. A comprehensive budget expresses in a common monetary language the plan of future activity. It takes accounts of past performance and how resources can be used to achieve the desired objectives. I%, therefore, set targets or goals for the whole enterprise or its various different units.
It is clear that budgeting is essential to a progressive and farsighted entrepreneur. The following key.elements should be considered in preparing operating budgets for a business enterprise: 1. Sal es
The key to overall business activity is the sales target. Given a sales target, you will be able to forecast the other figures in the operating budget by percentage analysis, or by responsible estimates. Income must always be assessed first simply because money cannot be spent unless there is income. Thus the forecast of sales is of paramount importance in preparing a company's budget. The market demand for the product has to be researched, examined and assessed. The market share which the firm has and aims to have must be established. The product has to satisfy the demand and must be continually developed to this end. Remember that customers demand the best quality at a price they are willing to pay. 2. Product cost
The product cost is the expense involved in making or buying a product, packing it and getting it ready to be sold. The estimate of the cost of manufacturing a product at the required number is a part of the operating budget.
3.
Selling expenses
These include cost of advertising, promotion, salesmen"s salaries, sales offices, delivery to customers, after-sales service, etc.
-PC .-.\,..,....A.'&-- ---z.-. OTT 'ice personnei, accounting ,.--cm.-lllcl1lclyl1ly, ThPCC -xpenc,c;;n,,nl,,r. *..Cd.. IIIIC cnpelllLle IV1 and s,.ieralservices. 5. Interest and financing costs
All businesses borrow money at one time or another and interest is always involved. These costs are kept separate. A simple operating budget is shown in Exhibit 9.
Year 0 Sales Cost of sales Gross profit Administrative & overhead expenses Net profit $1,000 ..oo
Year 0
Year 1
Year 2
Year 3
Assumptions:
1. 2. 3. 4.
actual Sales $lG,OOO, percentages the same as year 0 Sales $20,000, cost of sales $10,060, overhead expense 20% sales Sales $40,000, gross profit 60X, overhead expense $10,000
- 186 -
Type.45 &ldgcts 06
1. The first to be preparedisthe which sets outthe eslimates of income and expendituret. Uhile an operating statement shows sales, cost of .sales, overhead expenses and net profit for a past accounting period; an operating budget, on the other hand, is a forecast, plan and target of an operating statement for a future accounting period.
opeluding bucfgti,
An operating budget can never be "correct" since it is based on assumptions. The usefulness of the budget rests on the validity of its underlying assumptions. The two major stages in budgeting are p.&nning and opWoti. (See Exhibit 10). Exhibtt 10
Planning level
. Opera: 1,
- 187 Planning involves making a clear statement of the desired objectives and goals of the enterprise such as: a. b. Market share Sales volume What is the expected market share of the company? What is the sales target?
c. Profitability - How many per cent is the expected profit that the enterprise can attain? d. Return on investment How many pzr cent is the desired RDI?
The present operations are then reviewed to serve as guidelinesin preparing the budget estimates. In budgeting saies for instance, the following conditions must be considered: External conditions The general business conditions expected to prevail during the coming period Local business conditions expected to prevail The trend of poptilation in the trading area Probable changes in purchasing power Expected changes in the competitive market Fashion movements expected (for garments) Internal cnrlditicns Changes in promotional policies Changes in location and space Changes in personnel Changes in physical arrangement and merchandise layout Changes in price policy Changes in credit policy The second stage in budgeting is aptition6 or the actual activities of the enterprise. Here the following budget estimates are made: . . Sales Direct labour and direct materials
- 188 .
Manufacturing overhead
2. While the operating budget provides an idea of the expected revenue and expenditure during a future period, the &nanciae budgeX reveals the amounts of cash flowing in and out of the enterprise during the budget period. I,t is important to plan your cash to finance immediate operations. A cash budgti translates budgeted sales, costs and expenses into a forecast of monthlyand weekly cash receipts and disbursements based upon assumptions as to credit terms. Thus a sale on January 20th at credit terms of 60 days from invoice date becomes a cash receipt in the month of March. Forecast cash receipts and disbursements to determine future monthly excesses and shortages of cash and to see in advance the likely timing and duration of peak cash requirements. Plan to make adequate cash available when required and to avoid excessive idle cash balances which do not earn profit. Failure to estimate fr:turecash flow, and to control it continuously, can lead to serious consequences and, worse, the closure of the business. How then is a financial budget prepared? First, you need to know the probable financial situation at the beginning of the period through a balance sheet. This iS Oftefi merely estimated since it is not advisable to wait until the final document is prepared because part of the year shall have gone by then. Second, examine the operating budget. It is not possible for example, to estimate the cash coming from customers if the sales have not been estimated. When we task of the budget process, we deal with the operations budget, the shortinto term cash budget and long-term funds budget. All these are brocght together a budget of the over-all financial position which involves the preparation of a budgeted balance sheet. A balance sheet shows the assets of the business at a particular moment in time and how they are financed from debts and owner's equity. Here the balance sheet as at the beginning of the budget period is considered as the a&u.& balance sheet and the expectea balance sheet at the end of the period is known as the
- 189 be made on different assumptions to show the sensitivity of the overall financial position of the company to the different assumptions. It is clear that budgetary control is a very valuable tool in management. It is better to start with one department and extend the procedure to other departments step by step so that in a few years a workable operating procedure embracing all the activities in the company can be evolved. Cost accounting is applicable only to industries, while budgetary control can be adopted for use in any type of organization. CAPITAL PX3GEJlN~ ANALYSTS Capital budgeting is planning expenditures whose returns come in beyond one year. It is that tool of financial management which deals with the acquisition of assets such as land, buildings, machinery and equipment. It involves taking today risk of substantial investment (high capital outlay) for benefits later. Capital budgeting analysis starts with certain givens or assumptions: L' e Size of the investment (how much to invest?) Horizon (how long will the project be working?) . . . Annual savings (bow much to save each year?) Terminal value (what to get back by selling the assets at the end of the project?) Tax and interest rates (what tax rates and interest rates are relevant?)
Capital budgeting is also a managerial tool for making better decisions. The decision to buy or construct a fixed asset that will last for five years is an implicit five-year sales forecast. The economic life of an asset purchased represents an implicit forecast for the duration of the economic life of the asset. Hence, failure to make the forecast accurately will result in overinvestment or tinderinvestment in fixed assets. Good capital budgeting is, therefore, a condition for viability; it will also improve the timing of asset The following are some aspects acquisition and the quality of assets purchased. of capital budgeting: izibme.nts Capital budgeting involve: essentially the gathering of information for decision making. There ought to be present three circumstances to make capital budgeting possible. It is necesrary to have:
1.
2. 3.
Data about future receipts and costs from a proposed investment. A criterion to select the proposed investment. Alternatives, mostl,y in the form of more investment proposals.
Znvatment
An&+.&,
1.
190 -
A number of steps comprise a complete c3p tal budgeting program. These steps, which include procedural measures as well as analytical ones, are listed below: Prepare a list of investment proposal classified by category: replacement, b. expansion, c. cost-saving or product improvement, and Fi new products. The time horizon covered will include one-yea,-, three to fiveyear and long-term plans.
1.
Rank proposed projects using criteria which reflect interest factors. Develop a rule for applying a cut-off. Determine the total amount of funds required for accepted projects. Determine the amount of internal furidsavailable Lindexternal funds required.
7. Decide the total external funds that will be obtained. This may be less than the total under Item 6. Funds rationing will have to formulated. 8. Decide on the manner the external funds will be raised.
9. Determine the procedures for approval-of outlays requested. 10. Determine procedures for monitoring uses of appropriAte funds.
In many companies, there are more proposalsfor projects that the business is able
- 191 to package and to measure the end products. The work would cdl1 for a packaging machine. And the purchase of equipment for this purpose is independent of the purchase of the equipment for process control. A ranking procedure must be developed in order to allocate properly the company's crpital funds. The ranking procedure involves, first, the calculation of estimated savings from the use of equipment; and second, translation of the estimated savings into a measure of the advantage to be derived from the purchase of equipment. Thus anestimate of savings is required, and a conversion of the savings into a ranking measure must be developed. An indication of the nature of the task of calculating savings from a proposed investment is indicated by a brief consideration of the items that may affect savings. This include changes in the quality of the product, in the quality and quantity of direct labour, in the amount and cost or scrap and rework time, in maintenance expenses, safety, flexibility, etc. So many variables are involved that it is very difficult to generalize savings or advantages. Yet each capital equipment expenditure must be examined in detail for possible additional costs and savings. Therefore, although generalizations are not possible, the crucial importance of making savings analysis should not be overlooked. The quantitative approach to the selection of the measures of profitability of investments is used to estimate the effect of the alternatives on cash flows in relation to the required investments. The following are the most common techniques in arriving at the rate of return and selecting from various alternatives: 1. Payback
The payback method calculates the number of years required to recover the original investment by cash flows before depreciation but after taxes. It measures the time required for the sum of the annual net cash savings after taxes to equG1 the net cash investment required by the project. However, this method will be reliable only if the equipment to be compared are equal in amount and have the same life estimates with little of residual salvage values. For example, investment project "A" and "B" are proposed. Project "A" needs an initial investment of $1,000 and anticipates economic life of four years. Project "B" likewise needs an initial investment of $1,000 but projects an economic life of six years. During the lifetime of the two projects, it is expected that therewill be sales income from the products by the investment minus cash expenses. This amount is called cash flow. The cash flows of the two projects are shown in Exhibit 11. The payback period is three years for Projects A 2nd four years for Project B. The shortest period is to be chosen as preferable. Though the payback is simple and easy to calculate it can lead to wrong decisions. It ignores income beyond the payback period as shown in the cash flow. If the project is one which matures in later years, the use cf payback period can lead to the selection of less desirable investments. Investments with a longer payback period are those involved in long-range planning like developing a new product and a new market. All of these factors require initial investments which do not yield their highest return until a number of years later.
-I
192 -
Exhibit
11
Year
Project A $ 500
Project B $ 100
2 3 4 5 6
40Q 300
100
Another weakness of the payback method is that it fails to take into account the interest factor. This can be a very powerful factor at high rates of interest. For example, at a 30% interest rate, a dollar received five years later is worth only about 27 cents today. Thus the interest factor is too powerful to be safely ignored in making sound investment decisions.
The average rate of return is defined as the ratio of average annual net income after taxes over average investment. Average annual net income is the accounting income after depreciation and after taxes. In the above example, the average rate of return of Project "A" is 15 percent; for Project "B", 37 percent; these are computed and shown in Exhibit 12. The fundamental weakness of this method is that it disregards the time value of money. It fails to take into account the interest factor. Everybody knows that a dollar today is worth more than a dollar after five years.
Project A
(500
+ 400
+ 300 f
(1,000
100) + 0) f
(1,000)
15
Project B
(1,000)
I .
37
The average rate of return provides a better estimate of the rate of return over the payback method under the followirrycircumstances: a. b.
C.
The annual net income after taxes is constant. The project has no significant salvage valLe. The life of the project is less than twice the payback period.
RECORDKEEPING The foundation irfgood financial nmnagement is good financial information. No amount of cash planning or budgeting or even aoplication of costing principles will be effective if accounting records are not in order. Historical records must be established as the basis of future business decisions. A simplified bookkeeping system will serve the purpose as long as there is a commitment of management to enforce and use the system.
194 Any business, large or small, should maintain an efficient record keeping system. All business transactions should be recorded in full and on paper. Many businesses fail because of inadequate record keeping. A business may have an excellent product, a high sales volume and a good profit margin but, without proper records, it may be operating blindly and its chance of success becomes limited. WHY KEEP RECORDS? A question often asked by a small business owner is: records?" "Why do I have to keep
There are at least six reasons why record keeping is important in the small enterprise. 1. The law requires that some forms of records be kept by all businesses.
2. In times of keen competition, rising costs and increasing taxes, there can be no alternative to good record keeping. Every business must keep accurate and adequate records for successful operation. 3. There must be complete accounting of all busir!ebst;-ansactionsfor the modern small enterprise to efficiently handle purchases and sales, inventory cJntro1, credit and collection, depreciation, expense control, personnel and reports required by law and other aspects of business management. 4. a. b.
C.
Adequate records can provide answersto the following questions: How much profit is the business earning? How much is the business worth? How much do credit customers owe the business? How much does the business owe its creditors? How much tax should the business pay? Good records aid income tax reporting through a number of ways. For determining income
d. e. 5. a.
As an entrepreneur, you are required to keep permanent records, including inventories, to establish the amount of your gross income, expenses, deductions, credits, etc. As a taxpayer, you have to carry the burden of proof in order to justify your income tax return. And what better proof to show than substantial, well-kept records! b. For reducing tax liability and avoiding penalties
Good records make possible reduced tax liability a perfectly viable goal if arrived at by legal menas. You can arrange your business affairs in such a way that your taxes are kept as low as possible. This is what is known as tix
- 195 Lawyers cdn help you apply the provisions of the tax code in such a way as to reduce your tax liability.Butif he does not keep adequate records you may not be able to defend your income tax return successfully upon audit or reassessment. Since income tax is a major item a+ will probably involve thousands of dollars, here are some tips on how to save on taxes. . Record all kinds of business expenses incurred during the year. The accounting principle underlying this proposition is that the business unit should be treated as a separate entity from the entrepreneur. Therefore; it is permissible for you and any member of your family who devotes time in running the business to collect salaries as regular employees. The entrepreneur can also charge rent if the business is located at his residence. Be sure to keep a correct recording and costing of inventories. The inventory of merchandise at the end of the accounting period affects the net income subject to tax and an overstatement of inventories will overstate net income and vice-versa. Bad debts and depreciation are also deducted from gross income.
C.
avoidance.
Items on the income tax returns, when written on a chart, can be a measure of determining yearly progress or decline. For small entrepreneurs, the usefulness of understanding records and documents cannot be overemphasized. Unfortunately, the average small businessman has a narrow and short-run view of his business. And this cockeyed perspective has kept him from trying to understand his financial records and documents, continuously alienating him from the real performance of his business. Fordexample, just to save on taxes, he will fully relegate the functions of preparing the financial statements to a part-time accountant. The accountant generates a statement which shows losses rather than gains (what really happened), thus saving the business some cash in the short run. When this same businessman will attempt to borrow long-term funds for expansion purposes, he may not be able to explain why he is consistently losing and how he manages to survive at the same time. Furthermore, if he is operating in a very competitive market, he may not be able to pull the right cost items down so as to maintain his profit margins. 6. Proper use of good records helps the small entrepreneurs in the decisionmaking process. As earlier mentioned, financial statements reflect the overall performance of the firm during the previous years. It is these basic instruments which will permit the management-conscious small entrepreneurs to evaluate managerial effectiveness. Comparison of figures on net sales and expenses like advertising, travelling, bad debts, salaries and wages and rental for the last five years will indicate any particular cost which is out of line or which shows undue variations from year to
war i .J ---
- 196 -
The role of the accountarhkis to provide and interpret financial information to you who is the entrepreneur and decision-maker. Thus, for example, in acquiring fixed assets, the accountant's report should qive a definite answer as to whether the proposed investment is viable or not. Reports should be user-oriented, that is, governed by the needs of the entrepreneur rather than those of the accountants. They should be clear, concise and relevant and should identify important problerrareas and highlight the more important information. WHAT RECORDS TO KEEP As previously mentioned, financial information is necessary to make a sound and effective decision. The required information must be available at the right time and produced at the least cost possible. A set of books of accounts are usually maintained where day to day financial transactions are entered. Financial reports are then based on these records. Before any attempt is made at designing a set of bookkeeping records, the entrepreneur must discuss the information needs with his bookkeeper or accountant. If the primary intentions are to measure profit or loss for the period and the valuation of assets, liabilities and ownership at the end of the period, the following sets of books may be necessary: 1. Cash treceip& and tibumczmn& book - Day to day transactions involving cash outflow and inflow are recorded in this book. Important information furnished by this record include the balance of cash on hand and in bank, total collections on account sales or cash sales, amount of cash purchases, amount of daily expenses and other non-recurring cash outflow and inflows. 2. S&eb trecotd - All transactions pertaining to sales whether in cash or account are contained in this record. A daily check on this record will inform the entrepreneur as to the amount of sales made, thus indicating the trend of overall business performance. 3. Pw~chabe book - Payment and acquisition of raw materials are recorded in this book of account on a daily basis. 4. Genetrae higu~ - This book is used by the bookkeeper to summarize the financial transactions entered in the preceding books of accounts. Financial statements (the profit and loss statement and the balance sheet) are derived from this record. Instead of going through the different books of accounts, the entrepreneur could look into this record for the balances of income, expenses, assets, liabilities and the ownership. 5. Genwud joutmnu.t In addition to the first three books of accounts, some bookkeepers maintain a general journal for transactions which are not encountered daily such as sale of assets, adjusting entries (to correct erroneous ones or to update accounts), closing entries (income and expenses are measured at the close of the fiscal or calendar year), and balance transfered to the capital account.
197 -
To support recorded maintain a checking and withdrawals for payrolls to support receipts to support purchase orders.
transactions in these books9 the entrepreneur must also account or any kind of bank account to determine the deposits the period, vouchers to support payment of goods or services, payment of labourand wages, cash receipts and provisional collection on sales and other cash receipts, delivery and
Finally, to set this recording system, the entrepreneur is advised to see an accountant or hire a bookkeeper. The rewards from having a good set of records will more than compensate for the investments made. FZNANCZAL STATEMENTS The financial statements are the means of conveying to you, your managers, if any, and interested outsiders a concise picture of the profitabiiity and financial condition of your business. Since these statements are, in a sense, the end product of the accounting process, the businessman must understand the content and meaning of financial statements in order to appreciate the purpose of the earlier steps in recording and classifying the business transactions. A b&cc 4hee.tand XXX componeti
A balance sheet is a formal statement of financial position of the business that shows the assets, liabilities, and owner's equity in a classified manner and at a specific date. The balance sheet consists of two main sections, the "Assets" section and the "Liabilities and Owner's Equity" section which together represent the claims against the assets as shown in Exhibit 13. The balance sheet has the following components: 1. Assets
As you know, assets are things to value owned by the business and are normally classified as: current, fixed and other assets. CWUWX ad&et6 consist of cash and other assets that, in the normal course of operations, are expected to be converted into cash or consumed during the normal operating cycle of the business. The normal operating cycle is generally one year. Examples of current assets are cash, marketable securities, stocks of raw materials and prepaid expenses. F.&Ed a.~~2 are those acquired for long-term use and for physical use in the business. They appear in the balance sheet at cost minus depreciation. Fixed assets are treated as long-term costs, and the cost allocated by depreciation over the working life of the fixed assets. Land, building, plant, machinery, equipment, furniture and fixtures acquired for use are treated as fixed assets. Mh&Y iU4eX6 include patents, goodwiii, etc., which do not come within the above definitions. Goodwill is a hidden asset of the business because it represents the value and reputation that the business has gained through the years of its operation. Patents are legal rights to an invention. They are amortized over their working life.
- 198 -
ASSETS Current assets Cash Accounts receivable Inventory Prepaid expenses Fixed assets Machinery & equipment Other assets Goodwill LIABILITIES & OWNER'S EQiiITY Current liabilities Accounts payable Accrued liabilities Long term liabilities Mortgage bonds payable Owner's equity Capital Accumulated profits
- 199 2. Liabilities
Liabilities are money owned for goods to suppliers, for expenses to creditors and for loans are called liabilities. In short, liabilities are claims by creditors against the assets of the business. They are classified into current and longterm. CLIIW.@ &ubWea are obligations which are reasonably expected to become due within the normal operating cycle of the business. Accounts payable and accrued liabilities are classified as current liabilities. Accounts payable is the total amount owed to trade creditors for merchandise, service or supplies. Accrued liability is a developing but not yet enforceable claim that is accumulating with the receipt of a service. It arises from the purchase of services which have been only partly performed at the time of accounting and hence are not yet billed or paid for. 3. Owner's equity
This refers to the interest of the entrepreneur in the assets of a business. The amount is changed every year as you put in additional investments, as you make withdrawals from the business, and by theadditionof the net profit for the year.
The profit and ioss statement is a report that summarizes the revenue items, expense items and the difference between them, called net profit, for the accounting period. At the beginning and end of each accounting period, a balance sheet is normally prepared to show the financial picture of the business at each date. The changes in these two financial pictures are explained in the profit and loss statement. Unlike the balance sheet, no specific format is prescribed for a profit and loss statement. A condensed form however is illustrated in Exhibit 14. The following are the items in the profit and loss statement. 1. Net sales
The item "sales" include all sales of merchandise or services. Net sales is computed by subtracting sales discounts and salas returns and allowances from gross sales. 2. Cost of sales
The term "cost of sales" is the total price paid for the products sold during the accounting period plus in-transportation costs. Most small retail and wholesale businesses compute cost of goods sold (or cost of sales) by adding value of the goods purchased during the accounting period to the beginning inventory, and then subtracting the inventory on hand at the end of the accounting period.
- 200 -
Exhibit
14
Profit and Loss Statement For the Year Ended December 31, 19
Net sales Less cost of sales Gross profit Less operating expenses Dperating profit Less adn. & overhead expenses Net profit before tax ,Less provision for income tax Net profit
This refers to the difference between sales and cost of goods sold. does not take into account the overhead expenses of the business. 4. Selling expense
These are expenses incurred directly or indirectly in making sales. They include salaries of sales force, commissions, advertising expense and freight if goods are sold FOB-destination, etc. Shares of light, power , supplies and other expenses that contribute to the company's sales activities may also be charged to selling expense. In most small enterprises, however, such mixed expenses are usually charged to general expenses. 5. General and administrative expenses
Salaries of office personnel, supplies and other operating costs necessary to the overall administration of the business are included in this group of expenses. 6. Net profit
The net profit of the business is the final profit after matching and deducting all relevant costs and expenses for the accounting period. Net profit may be computed as follows: a. Gross profit less operating expenses (selling, administrative and general) equals the upWng ~a@ which is the profit from the normal business operations of the period. b. Operating profit less non-operating expenses such as interest, loss on sale of fixed assets, etc. equals pho&Lt bedohe aixxu.
C.
Profits before taxes, less provision for future income tax equals n&z pna#;t.
As a small manufacturer who converts raw materials into finished goods, your method of accounting for cost of goods sold differs from that used by wholesalers and retailers. In manufacturing, raw materials inventories, goods in process inventories, direct labour and factory overhead, in addition to finished goods inventories are involved in the computation of the cost of goods sold. To avoid long and complicated profit and loss statements, it is suggested that yoo report the cost of goods manufactured separately. Exhibits 15 and 16 illustrate a simplified Profit and Loss Statement and Statement of Cost of Goods Manufactured, respectively.
The balance of accumulated profit earned but left in the business and not distributed to shareholders increases the owner's equity. Conversely, losses reduce the amount of accumulated profit. If losses and dividends exceed the profits, the balance of accumulated profit becomes a deficit which reduces owner's equity.
- 202 -
Exhibit 15 Profit and Loss Statement For the Year Ended December 31, 19 $ xxx $ xxx xxx xxx xxx
Sales Cost of goods solds Finished goods, beginning of year Add cost of goods manufactured Total cost of goods available for sale Less finished goods, end of year Gross profit from sales Selling and administrative expenses: Office supplies Salaries and wages Postage, telephone and telegraph Depreciation Rent Repairs and maintenance Light and water Social security Taxes and licences Provision for doubtful accounts Miscellaneous Net income from operations Other expenses Interest expense Net income xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx
xxx $ xxx
- 203 -
Exhibit 16 Statement of Cost of Goods Manufactured For the Year Ended December 31, I9
Raw materials used Raw materials, beginning of year Add purchases Total available for use Less raw materials, end of year Raw materials used Direct labour Manufacturing overhead indirect materials Indirect labour Depreciation Rent Insurance *Repairs and maintenance Electricity, light and water Fdel and oil Social security Miscellaneous Total manufacturing cost Work-in-process, beginning of year Goods-in-process, end of year Cost of goods manufactured
$ xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx
As you have seen, financial management is a rather complex and crucial area in small enterprise management,involving as it does the understanding of various concepts, the use of diversetools and the maintenance of a number of records. As such, financial management has its pitfalls which you will want to watch-out against. Remember that you cannot absorb costly financial errors like large enterprises can. Therefore, you should know how to deal with the most common pitfalls. There are 14 financial pitfalls common to small companies,/ in business failure:,. which have resulted
Initial capital, some 1. 1~~u&$&ient capa at:Rhe daiz& 06 .the bu&ned6. which are needed for buying fixed assets and paying for supplies, salaries and merchandise, can be underestimated. In estimating capital needs, the following are often overlooked: a. Capital to cover the time between expenditure of money and collection of revenue. b.
C.
Money to cover the period for developing customers. Time to get the organization and its employees working. Time to implement ideas and produce quality products. Cash to buy supplies and equipment until credit is established. that can affect the financia 1 position
d. e.
In estimating your capital needs, (1) Base assumptions on facts, (2) Make room for miscalculations and unforeseen circumstances, and (3) Be conservative in estimating when and how much profit is expected. 2. lnadequa.te cap.Ctat 40% g&o&h and expamion. Al 1 too often, a small enterprise fails because it expands too fast for its capital base. When the company contracts, it ends up in financial trouble. Growth in sales increases the need for financing. A manager who contemplates an expansion should first determine the amount needed and consider various alternatives. He may decide that it is better to grow at a slower pace by concentrating on major accounts and holding off expansion until enough funds are accumulated. 3. Dependence on deb.t. A young lady once divulged a "most clever plan" for opening up her own shop by "borrowing money from the bank." Asked if she has savings to invest in the effort, she replied, I don't want to risk my own money. I would rather use the bank's money." Although few small business owners are that naive, the anecdote underscore the misconceptions about debt.
/Abdelsamad,
P~@kQQ
&ok Sm&
khineRh
- 205 There are two important things to remember about small industry financing. First, the high risk of failure makes lenders very careful about lending money to small enterprises. Second, interest on loans is determined by the risk involved. It is a fixed charge that must be paid on time and, when the principal comes due, arrangements have to be made for paying the debt without difficulty. 4. Inadequate @nun& p1anniMg. Planning is crucial. But many small entrepreneurs do not attend to their financial future until a severe problem develops. Planning is important in deciding what the objectives are and how they can be achieved. A financial plan for raising the necessary funds should be developed in detail for one year and for another four years. 5. inadequate c&i managemevzt. A key planning tool is the cash budget, which may be considered as a list of cash sources and disbursement items on a month-to-month basis. It estimates cash shortages or surpluses ahead, thus allowing the entrepreneur time to raise capital or find wa!s of investing excess funds. It is helpful in bank dealings, because it indicates the company's financial needs and ability to repay loans as they fall due. It also encourages "active budgeting" by providing a tool to determine any need to change the timjng of cash receipts and disbursements. For example, a contemplated capital expenditure could be delayed until excess cash is available. 6. Emphtiizing vo&me at the experzcle ROZ. More volume does not automatically 06 mean more profit. The name of the game is return on investment (ROI), which is margin times turnover. Margin is net profit per dollar of sales, and turnover is sales divided by assets. Sales at a price that does not cover all expenses and leave something for profit may be worse than less sales at adequate prices. Ove&ooking .the tik--&tin Anacieo{d. In any business, it is almostimpossible to avoid risk and get a high return at the same time. Usually, the more risk the more return you get and vice-versa. Good business practices improve the return your business earns at a given level of risk. 8. Taking too much money ou;t aQ the btiine66. A small entrepreneur usually starts his venture with his own savings and those of his family and friends. The capital market is usually inaccessible to him. He has to sacrifice for a few years and take as little as possible out of his business if he wants to expand. Profit should be used as a cushion to improve his business or help survive a downturn in the economy. 9. Con&sing ca,shukth nti income. "Where are all the profits we've made" and "tlowcome we're short of cash?" are typical questions of small entrepreneurs. But profit seldom stays in cash form. Cash is used to buy inventory and to invest in fixed assets. Cash flow should be carefully watched to make sure funds are available to pay maturing debts and other obligations. 10. lndequate bank htiOn4. Some small enterprises may not keep their bank informed of financial conditions and new developments. Bankers usually look favourably on entrepreneurs who inform them about the financial status of their firm. It pays to shop around for credit, too. While one banker may not grant a loan because of other opportunities, another may welcome the chance to develop a new customer.
7.
- 206 Waiting till the last minute to ask for a loan extension may force a bank to grant it, but it also shows financial weakness as well as increases the risk of being turned down. 11. MxmG2.j ti gflating ched.Lt. Some entrepreneurs believe profit can t;emade by selling to any customer. This is true only if the customer pays in cash or pays debts as they feel due. But most people prefer to be on credit, and many do not pay their debts on time. Billings for services or products are usually 12. lnadqu.ate bLL&g &+0zm. slow in small enterprises. Often, the individual in charge of billing is also in charge of other activities. It is advisable to hire a part-time employee to work on the billings on a regular basis. i3. 1nadequa-k hating 06 puyabeeb. Regardless of size, every cash discount taken advantage of can amount to important savings. For example a 2% discount for payment within ten days, with full payment in 30 days, is in effect a 2% interest charge on using the money for an additional 20 days. This is effective interest rate of 36% per annum. Also, paying bills promptly indicates financial strength and improves the firm's credit rating. 14. 1nadqua.Q An adequate accounting system is vital to any accounting 6 y&m. company, whatever its size. The system need not be complicated. It has only to provide a manager with enough information in order to know where he stands. The system should provide at least: a. b.
C.
A daily updated picture of the cash position. An accurate and up-to-date accounts receivable ledger. An up-to-date accounts payable ledger.
-d. An adequate system of payables that identifies bills to be paid and assures payment on time and use of cash discounts. e. For manufacturers, an adequate system for getting cost data on units produced.
f. Periodic accounting reports to show how the company has performed (about four times a year). You should be very careful in selecting an accounting firm. While a certi.fied public accountant can help in setting up a system, it is cheaper to hiro an accounting student or retired bookkeeper to do the records keeping on a part-time basis and let the accountant audit the books periodically and help with tax preparation. Indeed, good financial management enhances the chances for success in business. Some of the mistakes do not require complicated solutions, only some familiarity with bssic financial techniques.
- 207 -
CHAPTER
VIII
F.ifuwdd
haLi
&evehllge, a&ivay and pho#ZabiXSy htiOb. The key-phob&emh apptoach LA hued on majoh pho b&mb commotiy encountmed by Ewuk-even analybih LA tie&..& became Xhai poiti AmaLt @a.m. can in@uence the way where pho&XabUy -- oh LohA -- beg& FhmU!y, the etiephenewr who WLVL.& to The &Am .Ls managed. @obe into the con&ion 05 kin &&m, may amwen a atipXe quationnahe-guide which cove.~ the opWonal phanen 04 a
nm& buclinun.
analybih, which &udi~ Xhe &&anti @tm, cvre06 dowr ptintipat types : &~u.&L~Xy,
In starting and managing your small enterprise, there will be a recurring need to analyze your firm: how it has performed, what problems beset it or are likely to beset it; and what to do about existing or anticipated problems and opportunities. The mark of an effective entrepreneur is his ability to prevent a problem from turning into a crisis and to transform an opportunity into profits. And this ability is enhanced by periodically analyzing the performance and situation of the business. There are many methods of analyzing a business. This chapter will discuss four of the more common and simple methods of analyzing a business, namely: ~.inancid tratio analy.&&; key phob&mn approach; bheak-even anatyb.in; and quecltionna.i&e
guide.
FINANCIAL
RATIO
ANALYSIS
As a small entrepreneur, you would want answers to the following questions: . Can the firm meet its current obligations? Is the firm heavily indebted? . . . Does it have too much investment on accounts receivable and/or inventory? Does it earn a fair return on its investments? How much is the worth of its assets?
- 208 -
The answers to these questions can be derived from an analysis of the financial statements of the firm. Remember that financial analysis has its advantages as well as limitations. One advantage of financial analysis is that it carifocus clearly on vital ratios as profits in terms of a percentage of sales or profits in terms of percentage of investment. Another advantage is that it is easy to apply. This assumes, of course, that relevant accounting data are available. A third advantage is that financial analysis provides information, like ratios measuring liquidity, profitability and solvency, in which a financing institution is interested. Financial analysis, however, has three disadvantages. First, the feedback is slow. A firm's mistakes and problems can be detected by other means long before they are reflected in the financial statements. Second, financial ratios often reveal symptoms rather than causes. A difficult financial condition is often the result of management mistakes like misuse of funds or uncompetitive pricing. A third drawback is that financial analysis tends to focus on past events rather than on problems that lie ahead. Projections of financial trends can indicate future problems but the projections are based on past conditions which may radically change in the future. It is often helpful to relate financial data to each other in order to obtain ratios, which disclose more useful information that can be derived from the raw figures themselves. For example, to compare the amount of current assets on the balance sheet to the amount of current liabilities is more meaningful than simply to look at each amount without reference to the other. Current assets are frequently considered the major reservoir of funds for meeting current obligations. To illustrate, examples of financial data from a balance sheet ard an income statement are shown on Exhibits 1 and 2. MAJOR TYPES OF FTMNCIAL RATIOS .&qtidity, Levmage,
activity
There are four major types of financial ratios: and p&o,$XabUy ratios. L-Q.LLdity hacOd
Liquidity ratios are those ratios which measure the firm's ability to meet its maturing short-term obligations. Generally, the first concern in financial analysis is liquidity. Although a full liquidity analysis requires the use of cash budgets, ratio and analysis provide a quick measure of liquidity by relating the amount of cash and other assets to the current liabilities. There are two commonly used liquidity ratios. 1. Current ratio - The current ratio is computed by dividing current assets by current liabilities. Current assets include cash, marketable securities, accounts receivable and inventories; current liabilities consist of accounts Payable, short-term notes payable, accrued income taxes and other accrued expenses. The current ratio is one of the most commonly used indices of financial ctrength, since it indicates the extent to which the claims of shortterm creditors are covered by assets that are expected to be converted into cash in a period corresponding to the maturity of the claims.
Exhibit
ABC COMPANY Balance Sheet As of December 31, 1980 ASSETS Current Assets: Cash Marketable securities Accounts receivables Inventories Total current assets Fixed Assets: Plant and Equipment Less Depreciation $1,44O,OOO 400,000 1,040,000 $ 40,000 i20,OOO 160,000 240,000 560,000 LIABILITIES AND EQUITY Current Liabilities: Accounts payable Notes payable, 10% Accrued expenses Provisions for income tax Total current liabilities Long Term Liabilities: First Mortgage, bonds, 8% Debentures, 106 Total Equity: Common stock (48,000 shares) Accumulated profit Total equity Total Liabilities and Equity $ 480,000 32Q,COO 800,000 $400,000 160,000 560,000 $ 48,000 80,000 8,000 104,000
$ 240,000
- 210 Exhibit 2
ABC COMPANY Profit and Loss Statement For the Year Ended December 31, 1980
Net Sales Cost of goods sold Gross profit Less: operating expenses Selling General and Administrative Lease payment on office building Gross operating profit Depreciation Net operating profit Add: Other income Royalties Gross income before interest and tax Less: Other expenses Interest on notes payable Interest on first mortgage Interest on debentures Net profit before income tax Income tax * (at 40%) Net profit after income tax 17,600 32,000 22,400
$ $
+:Assumption:
- 2i1 -
The calculation of the current ratio for ABC Company for the year ended 1980 is shown below: Current Ratio = Current assets Current liabilities = $560,000 8240,OOO = 2.3 times
With a current ratio of 2.3, ABC Company could liquidate current assets at only 43% of book value and still pay off current obligations in full. 2. Quick ratio or acid test - This ratio is calculated by dividing current assets less inventories by current liabilities. Inventories are the least liquid of a firm's current assets and the assets on which losses are most likely to occur in the event of liquidation. It is a severe test of liquidity since it concentrates on strictly liquid assets. Quick ratio = Current Assets - Inventory = $320,000 Current Liabilities pqmn = 1.3 times
Remember that if the marketable securities can be sold at par and the accounts receivables can be collected, the company can settle its obligations without selling inventory. Leuehage Ratios Leverage ratios, which measure the extent to which the firm has been financed by debt is the second fundamental type of ratios. This ratio has a number of implications. First, creditors look at the equity to provide margin of safety. If owners have provided only a small proportion of the total financing, the risks of the enterprise are borne mainly by the creditors. Second, by raising funds through debt, owners gain the benefits of controlling the firm with a limited investment. Third, the firm may earn more on borrowed funds than it pays in interest. For example, if assets earn 14% and debt costs only 12%, there is a 2% differential accruing to the owner. In this case the leverage is favourable. However, if thereturnon assets goes down leverage is unfavourable because the cost of debt is more than what assets earn. Firms with low leverage ratios have less risk of loss when the economy is in a downturn and have lower expected returns when the economy booms. Conversely, firms with high leverage ratios may have high risk of losses and chance of earning big profits. Investors are reluctant to take risks even if the prospects high returns are desirable. Decisions about the use of leverage, then, must balance higher expected returns against increased risk. The three leverage ratios are presented below: 1. Total debt to total assets - The ratio of total debt to total assets is called the de& &a, which measures the percentage of total funds provided by creditors. Debt includes current and long-term liabilities. Creditors prefer moderate debt ratios, since the lower the ratio, the greater the protection against creditors' losses in case of liquidation. In contrast, the owners may cho:jsehigh leverage either to magnify earnings or to maintain some degree of control of the firm. If the business venture is unsuccessful, only a moderate loss is incurred by the owners because their investment is small.
- 212 Debt ratio = total debt total assets = B 800,000 1,600,OOO = 50%
ABC Company's debt ratio is 50%; thi: neans that creditors have supplied half of the firm's total financing. The ( mpany may find it difficult to borrow additional funds without first raisir, its equity. Creditors would be reluctant to lend money to the firm. I 2. Times interest earned - This rati is determined by dividing earnings before interest and taxes by the interest ch -ges. The time in-interest-earned ratio measures the extent to which earnings zan fall without resulting in financial embarrassment tothe firm because of inability to pay annual interest costs. Failure to meet this obligation can lead to legal action by the creditors. Since income taxes are computed after interest expense is deducted, the ability to pay current interest is not affected by income taxes. Times interest earned = = profit before taxes + interest charqes interest charges $216,000 56,000 = 3.8 times
ABC Company's interest charges consist of three payments totalling $56,000 (See Exhibit 2). The firm's gross income is $216,000, so that the interest is covered 3.8 times. This ratio reinforces the conclusion based on the debt ratio that the company is likely to face some difficulties it if tries to borrow additional funds. 3. Fixed charge coverage - This ratio is similar to the times-interestearned ratio. But this should be preferred to the other when the company opts for a leasing scheme rather than an outri ht purchase. Fixed chahgen are interests plus annual 7 ong-term lease obligations and the fixed charge coverage ratio is computed as follows: Fixed charge coverage = before profit taxes+ interest charges + * lease obliqations interest charges + lease obllgatlons $160,000 + $56,000 + 22,400 $ 56,000 f 22,400 $238,400 g 3.04 times
= = =
-*Assuming
- 213 Again, the ratio of 3.04 indicates that the firm is weak and that the company is likely -toencounter some difficulties in borrowing additional funds.
The ratios which measure how effectively the firm is using its resources are called activity -0~. These ratios compare the level of sales and the investmenT;in various asset accounts. There should be a p&apet~balance between sales and the various asset accounts such as accounts receivable inventories, fixed assets and other assets. 1. Inventory turnover- The inventory turnover is defined as by inventories. Inventory turnover = sales inventory = $2,400,000 240,000 = sales divided 10 times
The turnover of 10 times indicates that the company does not hold excessive stocks on hand; these excess stocks are unproductive and represent an investment with a zero return. The high inventory turnover also reinforces your faith as analyst in the current ratios. In computing and analyzing the inventory turnover, two problems may arise. First, sales are valued at market prices while inventories are generally carried at cost. It is, therefore, more appropriate to use cost of goods sold in place of sales as the numerator of the formula. The second problem lies in the fact that sales occur over the entire year, whereas the inventory figure is accurate only at one point in time. In this case, it is better to use an average inventory which is computed by adding the beginning and ending inventories divided by 2. 2. Average collection period. The average collection period, which is a measure of the accounts receivable turnover, is computed in two steps: a. Annual sales are divided by 360 to get the average daily sales; Receivables are divided by sales per day to get the average collection eriod. b. This is called the average collection period because it represents Phe average length of time that the firm must wait after makinq a sale before it can collect cash. Sales per day = $2,400,000 360 = $6,666
Average collection period =,receivables sales per day = $.160,000 8 6,665 = 24 days
- 214 This ratio can be evaluated by comparing it with the terms on which the firm sells its goods. Assuming that ABC Company's sales terms is 20 days, the 24day collection period indicate that customers, in general, don't pay their bills on time. 3. Fixed asset turnover - The ratio of sales to fixed assets measures the turnover of plant and equipment. Fixed asset turnover = = sales net fixed assets $2 400,000 -f7mmmi = 2.3 times
The ratio of 2.3 times indicates that the company is not using its fixed assets to its full capacity. 4. Total assets turnover - This is the final activity ratio which measures the turnover of all the firm's assets. It calculated by dividing sales by total assets. Total assets turnover = = sales total assets $2,400,000 $1,600,000 = 1.5 times
The firm is not generating a sufficient volume of sales for the size of its asset investment. Sales should be increased, or utilized assets should be disposed of.
Profitability is the net result of the company's objectives and policies. The profitability ratios measure the entrepreneur'soverall effectiveness as shown by the returns generated on sales and investments. 1. Profit margin on sales after taxes by sales. Profit margin = = This is determined by dividing net profit
The orofit margin indicates that the firm's sales prices are relat.ivelylow or that its costs are high or both.
- 215 2. Return on total assets - The ratio of net profit to total assets measures the returns on total investment in the firm, otherwise known as :he ROI. Return on total assets = = net profit after taxes total assets $ 96,000 91,600,OOO = 6%
This low rate results from the low profit margin on sales and from the low turnover of total assets. 3. Return on equity - The ratio of net profit after taxes to equity measures the rate of return on the owner's investment. Return on equity = = net profit after taxes equity $ 96,000 800,000 = 12%
Only half of ABC Company's assets is financed with equity, the other half is financed with debt. This means that the entire per cent return on assets goes to the common stockholders.
USEFUL TZPS FOR FZNANCZAL ANALYSZS Finally, here are several pointers to keep in mind when making a financial analysis: 1. Select data which are relevant to the analysis. The purpose of the evaluation gives clues to the nature of the ratios whicn will be helpful. 2. Extend your analysis over several past periods, as well as the current period, to be able to observe any unusual trends. 3. Concentrate on all variations from any applicable standard, such as industry data, especially if there is a consistent trend over a period of time, and try to analyze their causes by cross-checking with the ratios and raw data.
- 216 -
KEY
PROBLEMS
APPROACH
The key-problems approach to analyzing your business is problem-oriented. Based on research studies and consultancy practice, the major problems commonly encountered by small firms will be described with suggestions on how to avoid or solve them. The problems will be classified according to the various functional areas of business management. MANAGEMENT ASPECTS la&
06 balanced managenide b/CL.&
This is the principal reason and the root cause for most small business failures. This is not surprising because the small entrepreneur, who can ill-afford the services of specialists to assist him, assumes ali managerial functions which require a multiple of skills. The owner-manager, however, lacks the necessary skills to perform or supervise the tasks of marketing, production, accounting and personnel management. For example, a super salesman starting his own business may not have the ability to plan and coordinate production to meet commitments and customers' expectations. Or an accountant may not have the ability to understand his market or the personality to promote his products successfully. The lack of managerial skills may not be too much of a problem for the small firm with less than .fiveemployees or for the self-employed person. But the problem becomes more acute as %he firm grows. The problem can be avoided or minimized in the following ways: 1. You can postpone your decision to start your business until such time that you have acquired sufficient experience on the general management level and in the particular business you intend to enter. 2. The skills that you lack can be provided by qualified employees, business partners or consultants. Everyone has his limitations and that includes you. But if YOU are smart, you can bring into your firm tiletalents of many people. You need not fight the battle alone. 3. You can acquire the necessary skills thru training offered by universities and other training institutions or thru on-the-job training in a small business. F-eta
de&gate
Many firms remain small because their growth is limited to what the owner can do himself. At the start,when the business is very small, it is appropriate that you take charge of all the operations. The need to deleqate occurs when the firm becomestoo large for one man to run but too small to afford a full team, of managers. The failure to delegate becomes apparent when you feel bogged down in details; when you start making costly mistakes you normally would not commit if you were not too busy. This inability to delegate is difficult to overcome because you naturally feel quite attached to your business. It is, so to speak, your'baby'and you may not like to share control over it with others. But if you want your business to survive, you simply must change your management style when the situation requires it.
- 217 -
Why should you delegate? Delegating multiplies your power -- you can do more things. It is a form of insurance -- business can run smoothly even when you have to be absent. Moreover, some employees become more motivated when they are given more responsibility. One way of avoiding this pitfall is to develop a strong second man, a top assistant. These guidelines can help you develop a good second man: 1. Recruit one who has the qualifications and the potential to be your top assistant, You may need one who is strong where you are weak. Since hiring a too assistant is a key decision, consulting other people can help you make a good choice. 2. Define clearly what your top assistant can do, share relevant information and skills, and get the other employees' cooperation. 3. Give a trial period during which you delegate responsibility gradually and the top assistant can prove his ability to help you and the firm. 4. Reward your top assistant adequately, perhaps, even to the extent of sharing the profits or the business with him.
Taking too much out 06 the bw&um You are earning a living by managing your own business but resist the temptation to withdraw too much from the business for personal expenses. Exercise fiscal discipline especially in the first years and in difficult times. Few small firms can recover from a major setback. Your firm will have a better chance of weathering a crisis if you conserve your capital "for a rainy day."
- 218 -
Yes, too much success can create trouble for you. The sales of your products have exceeded your expectations and you decide to expand or diversify into other businesses. You later find out that you cannot duplicate your earlier successes. Before deciding whether or not to expand your business, first analyze the reasons why you were successful in the past. You may have succeeded because you or your men had the special knowledge or skills for your particular business. But you may not have the competence to expand into a new business or run a bigger-scale operation. Or you may have succeedednotbecauseofyourexpertise but simply because you were lucky , the timing was right or there was no competition. Simply stated, grow according to your ability, your resources and the external conditions affecting your firm. Too much success, instead of generating overconfidence,may encourage complacency. After years of struggle yfJUr business becomes established and you may tend to relax. You continue to depend on the same management skills, the same products and processes for future growth and profits. Before long you become uncompetitive and other firms encrcach on your market share. If you want to stay in business, you must realize that market conditions change very fast -- new firms are coming in and new products , materials, processes and machineries are being developed. From biology, we learn that the organism that can adjust to changes in its environment is the organism that will survive and grow. This also holds true for busirlessorganizations. L!ARKETASPECTS
Lack 06 cu4.i3m~-otien.Za2Xon
Although you are managing your own business, you still have a boss, and that is your customer. Your success as a small enterprise manager depends greatly on how well you can satisfy ycur customer's needs. Focus your attention on what your customers need, not on what products or services you can make or provide. UnMegtied malrke;ting ac,tivLty
Marketing, which was underscored earlier (see Chapter V), is not an isolated function. Any activity or decision regarding marketing is interrelated with other areas and functions within and outside the enterprise.
Pependence
on a 4.&g&
rntik&
Not a few projects have failed because of their excessive dependence un a single market. Some examples of these are companies who used to apply logging spare parts, or those who cater to the sugar industry. Still, we find companies which have folded up because their foreign buyers have suddenly rescinded their marketing agreemen%s , or have turned to other suppliers. It would be to your advantage to avoid "putting all your eggs in one basket". Rather, you should consider diversification and variety in your market. Flexibility in business operations must also be a goal, if only to develop an c:bility to adjust to the ever-changing environment. Where an enterprise will have to be
- 219 promoted based on the demands of a single major industry, care must be exercised in assessing the prospects of such industry to be serviced, considering especially that your success will simply ride on the success of the industry being serviced. By the same token, a careful investigation of an ex&.&ve buyen is a must before an entrepreneur decides to commit his resources to a given undertaking. Competition A number of small firms have also failed because of the entry of competitors into a market which was initially considered "captive! It must be recognized that competition is encouraged inasmuch as it helps bring to the ultimate consumers better goods and services at more favourable terms/prices. Part of the viability of a business rests with its competitiveness and ability to sell its products in a competitive environment. Thus, in defining your product, it is important that you are able to pin down your competitive advantage and know how to capitalize and improve on it. Furthermore, a careful study of prospective competitors and how they will affect the business must be conducted, with the end in view to defining directions that the company must pursue to be competitive.
Many enterprises that have ventured into new products have found themselves having to face the difficulties brought about by an unfamiliar market. Product quality requirements, trade practices and the changing demands of buyers are factors which have to be carefully studied before attempting to plunge into a new undertaking. Familiarity with the abaca market, for example, does not ensure familiarity with the rattan furniture market; neither does familiarity with the rattan furniture market ensure knowledge of the wooden furniture market. It is therefore important to look seriously into the various dimensions of the market (customer preferences, trade practices, sales terms, method of shipment, etc.) before any attempt to produce is made.
TECHNICAL ASPECTS Pootrp.&mt location In a number of instances, plant location has played a critical role in the viability of new ventures. Locating too close to the labour or raw materials sources could sometimesmean moving too far from the market. And a business that relies too heavily on"walk-in'customers may soon find itself in an uncompetitive position. On the other hand, locating too close to the market may render raw materials too expensive due to freight expenses. You should therefore select your plant location carefully in relation to the critical inputs of your venture, such as labour, raw materials and power, as well as your market. Don't overlook transport facilities, where necessary. Consider zoning regulations, too, where such exist because the existence of such restrictions or laws could affect the smooth operations of your business.
- 220 -
Raw materials sho.tage refers not only to the total absence of raw materials, but alsotothe unavailability of raw materials in therightqualityand at sucheffective costs that would render the business viable. Considering that the entire production process takes off from the raw materials stage, you must carefully study the long-term availability of your raw materials requirements. In this age of constantly spiralling costs, it would be prudent to ensure that your company would have sufficient resources to allow for increases in raw materials costs. Corollarily, behaviour of materials prices could be analyzed to assess their long-term implications on the venture's viability. Problems labelled as"rad materials shortage'may be traced to the entrepreneur's lack of familiarity with procurement practices. This is especially evident in industries where quality materials are not so abundant that suppliers enjoy the advantage of being able to practically dictate the terms of the sale. Procurement of-good-quality rattan.poles, for example, often require that advance payments-be made to-the middlemen or the supplier. Without recognizing these realities, it would be very difficult to appreciate the implications of such problems on the company's working capita1 situation and the project's viabil ity and profitability as a whole. lnadequafe quality conho.t
Quality control is one important aspect that is often overlooked in the production process. It must be noted that the competitive advantage of any product rests primarily on its quality, apart from other secondary factors such as price. This is even more significant for a company which caters to the discriminating export market. It should be noted that foreign buyers have a wide choice of supply sources and could therefore afford to be very selective, discriminating and quality-conscious. It would be best to be constantly aware of the preferences o? the buyer and be able to integrate them into the production process. FZNANC'IALANV ACCOUN-MNG ASPECTS
Starting a business involves many risks and hardwork. It is not surprising then that an entrepreneur is often called an optimist. Optimists tend to underestimate the time and money required to start a new business -- the time needed to develop a new product, organize the firm's resources and develop market acceptance. Schedulesslip, expenses exceed expectations and sales stagnate. The starting capital is depleted and operations slow down and perhaps grind to a halt. Prevention is better than cure and planning can avoid the problem of inadequate capital. Plan so that you can accurately estimate how much starting capital you need for land, buildings, machinery and equipment, materials and working capital, providing for safety margins to absorb cost overruns. It is advisable to have your plan checked or prepared by a knowledgeable person -- an accountant, a consultant or your banker, if you intend to borrow.
Borrowing can sJlve your financing problems but it can also worsen your financial situation in some cases. For instance, if you are going to borrow at an effective interest rate of 18% a year and your net profit before interest is 15%, you may end up with a loss. If you are going to borrow a substantial amount, be reasonably sure that your business will earn enough profits to cover interest charges and generate enough cash to meet amortization payments and sustain operations. A good project study will show if your plan to borrow is viabie. Paa& accouting ~eccmdh
A UP ISSI study reveals that successful small business firms keep more complete accounting records than the unsuccessful small businesses. The connection between managing a successful business and keeping adequate accounting records seems obvious. A manager can seldom make sound decisions without adequate information. Without accounting records you cannot know what is your break-even selling price or sales volume, how much you should price your product, how much profit, if any, ycd are making, how safe is your cash position. Information may not always be complete but at ieast your decisions will not be based solely on plain guesswork and l~feel.1~
- 222 You should hire a knowledgeable accountant on at least a part-time basis to set up a simple recording system to enable you to monitor sales, costs, gross margin, profit and loss, and cash situation. Too much capm -& 6ixed
a~&
One advantage of the small firm is its low overhead. But if youinvest too much of your capital on fixed assets -- land, building, machinery -- you are likely to lose this advantage. Moreover, the working capital available is lessened, impairing your flexibility to overcome a crisis or take advantage of an opportunity. You can avoid investing too much capital in fixed assets by: 1. 2. Leasing, instead of buying land, building, machinery and equipment Buying in installment
3. Purchasing second-hand machinery and equipment if operations and the marketability of your product are not seriously affected 4. Using labour instead of machinery for some operations
5. Subcontracting part or all of the production requirements so that you will not need additional machinery and equipment 6. Acquiring only fixed assets that are adequate to meet the requirements of the business. For instance, do not buy a 1,000 sq. m. lot if a 500 sq.m. lot will do; do not purchase machinery and equipment that can produce 10,000 units a year if your expected sales is only 5,000 units a year 7. Making, instead of buying, equipment, furniture and fixtures.
POOJLwted.4.t pmcR;iceA In your desire to generate more sales, you may tend to be too liberal in granting credit. In turn, some of your customers may take you for granted and delay payment. You then find yourself having a hard time paying your own obligations to The solution is proper credit control your employees , suppliers and creditors. although this may be easier said than done. You should prefer cash-paying customers and be more selective in granting credit. Remember that business is business and you should collect even from friends and relatives. Monitor closely your customers whose accounts are due and promptly follow up these accounts especially the big ones. In granting credit, the rule of thumb is to have additional capital equal to 45 days credit sales if you are giving customers 30 days to pay. Before granting credit, you must be able to answer these two questions positively: Do I have enough capital? Can I collect?
- 223 POOJLcash management Related ,tothe last two problems is poor cash management. Any accountant will tell you that your business may show profit on paper but actually has little cash to sustain its operations. You may have attained your sales targets but if most of your sales are on credit, you dc not have additional capital and payments are delayed, then you have a cash crisis. Sales may be picking up but you lack cash to purchase additional inventory. You look for Fdditional credit but, as many businessmen have found out, no one is willing to lend you money when you desperately need P~Q~;+ whereas credit was avaiiable when you didn't need it. b,\-UIL The mark of a good manager is his ability to prevent a problem from becoming a crisis and this requires planning and foresight. The technique to use here is auh &&u ana.ty.td in which you project your cash flow for the coming months -where the cash will come from, where the cash will be used, how much will be the cash balance and how much additional cash will be needed. If you anticipate a need to conserve cash you may decide to keep inventories to a minimum, seek suppliers who can provide credit, reduce credit sales, seek cash-paying customers, get purchase discount or limit investments in fixed assets. Your cash flow projections will become more accurate as you compare projected and actual cash flow and study the differences. A knowledgeable accountant can prepare a cash flow form suited to your needs.
BREAK-EVEN ANALYSIS Break-even is that point where there is neither gain nor loss in your firm's operations; where total sales equals total costs. Where profitability (or loss) begins i-svital. it should have an important influence on the way in which you , manage your enterprise. The planning you do and the decisions you make when the business is operating at a profit are likely to be different from those made when the business is in the red. If you can determine where you break even, you can get reasonably correct answers to such questions as: .
.
If I change selling price, what happens to profits? If I reduce costs or expenses, how much more profit will I earn? At a given sales vo lume, what will the profit be?
If I intend to earn a particu1ar amount of profit, how much should I sell to achieve my goal? . What will happen to profit if I: -hire another employee? -use cheaper raw materials? -buy a more efficient machine? -discharge a key official? -grant a general wage increase?
- 224 COMPUTING FOR THE BREAK-EVEN To compute for break-even, one has to understand the behaviour of cost in relation to volume and time. Over a short period of time (one year or less) there are three types of costs in relation to volume: fixed cost, variable cost, and semi-variable cost.
0.ha.t i.h ,$ixedCOh$?
Fixed costs are those costs that are incurred regardless of the volume. Examples of fixed costs are rent of the building, property insurance, depreciation (if based on straight-line method) and salary of management. Whether there is production or not you incur fixed costs. It must be noted that if the total fixed cost is divided by volume, the bigger the volume is, the smaller the unit cost becomes (see Exhibits 3 and 4).
What ih
vm&b&
COhx?
Variable costs are these incurred in proportion to the volume. no cost. The more units produced, the more costs. The cost varies in relation to volume.
No production,
It must be noted that if total variable cost is divided by the number of units, the unit variable cost remains the same (See Exhibit 5). Thus, if you know the unit variable cost and the volume, then you can get the total variable cost by multiplying the unit variable cost by the volume. Total VC Total VC 400 = = = Unit VC x Volume (X) VC x X 400 x 1 Equation 1
Examples of variable costs include raw materials, fuel, depreciation, (based on operating hours) and compensation based on volume (e.g., piece or rate commission for salesman).
- 225 Exhibit 3
Total Fixed Cost (500,000) 500,000 500,000 500 ,000 500,000 500,000
Exhibit
cost (000)
1,000 _ 750 500 250 _ Fixed Cost
1,000
2,000 Volume
3,000
- 226 Exhibit 5
Exh
it
Cost (8)
Variable cost
olume
It is cost that changes with the change in volume but not in direct proportion (See Exhibits 7 and 8). Examples of semi-variable cost are certain supplies and transportation cos;.
Exhibit
Exhibit
Semi-variable cost
FC
- 228 In order to facilitate the computation of the break-even point, however, costs are classified either as fixed or variable cost. By adding the total fixed cost and the total variable cost, you get the total cost. TC = TFC + TVC Equation 2
Exhibit
- 229 Another aspect in computing for break-even is computing for the total sales. Total sales is obtained by mult iplying the volume (X) in un its by the selling price per unit. Total sales (TS) TS = = Selling price (P) Volume (X) PXX x
EquationT
At break-even, total sales equals total cost. TS Therefore: at break-even: Selling price (P) x Volume (X) PXX PXX = = TFC t TVC = Fixed cost (FC) t Variable cost (VC) Equation 5 = TC Equation 4
With the mathematical formula in Equation 5 you can compute for one unknown.
Example
1.
Suppose you would like to find out the Volume (X), at which the company breaks even, so:
PXX $500 x x
= = = = =
FC
vc
0)
Break-even volume X
2,000 units
- 230 To check: SPX $500 x = = = = x FC + VC (X) 500,000 + 250 (2,000) 500,000 t 500,000 ss===-i=== 1 000 000 $500 (Selling price) = $~~Q_OO,OQO
Break-even sales
Exhibit
10
j
cost
Sales TC TVC
(1000)
TFC
- 231 -
2,000
2,000 SP P
1,000 ,GOO
To check:
500
1 ,ooo,ooo 1,000,000
2,000
= x
1 ,ooo,ooo
+ 2,000 + 500,000
(250)
Examp&
3:
Suppose you are able to treduce your ~$Lxed codt (FC) to $400,000 what till be the new break-even point? SP
500
x x x X X
= = = =
FC
VC
(x)
= =
$800,000
- 232 -
Exhibit II
cost
Exampkk 4: Suppose you will be able to heduce new break-even point? Selling price x utib& = = = = = units x $500 = $833,500 co& to $200, what will be the
volume
Fixed cost + Variable cost X Volume 500,000 500,OGO 500,000 5oo,ooc 300 x 200x
500 x x 500x - 200x 300x X Break-even volume Break-even sales X = = 1,667 1,667
- 233 Exhibit 12
Sales
cost (1000) TC
/
New TC
833.3
- 234 -
Example
5 :
Suppose you would like to reduce the selling price to $400, what will be the new break-even vollume? PXX 400 x x 400x - 250 X 150 x = = = = FC + VC (X) 500,000 + 250 (Xl 500,000 500,000
= =
3,333 3,333
Exhibit
13 / Sales sales
cost
(1000)
1000
2000
3000
4000
5000
Volume
BEI
BE2
= =
- 235 The exercise can be carried on, assuming various situations. From the examples given you can see that the profitability of the company is affected by changes in selling price, fixed cost, variable cost and the volume. The break-even analysis helps you see how these changes happen. THE CASH BREAK-El/ENPOZNT A new way of using the break-even analysis is to look at the cab bmah-even p~h.t (CBEP). If all the transactiotiswere on cash basis the profit break-even point and the cash break-even point would be the same. For most companies, however, this is not the case because not all transactions are on cash basis. non-cash transactions are depreciation, amortization of leasehold Examples of improvements and amortization of pre-operating expenses. The cash break-even point sales volume is used if cash flow is more critical than the profit picture. The firm must be able to determine the following items: 1. 2. 3. 4. 2: unit canh variable cost (UCVC) totalcah variable cost (TCVC) sales volume (V) in units cash profit margin (CPM) unit selling price (P) total CCLE~~fixed cost (TCFC)
The formula for computing the cash break-even point is: ucvc CPM = = TCVC V P - UCVC = TCFC CPM
Cash break-even point CBEP (in units) Example: Given: P = TCVC = TCFC = 4,000 units $500 $800,000 $400,000
- 236 -
Applying the formula: ucvc CPM CBEP (in units) = = = $800,000 4,000 = $200 $300 1,333 units
Thus, in order for the company to meet its cash needs, it must sell at least 1,333 units. THE MULTZ-PRODUCT COMPANY A multi-product company can also use the break-even analysis. 1. The first step is to identify the variable costs and fixed costs for each product. 2. 3. Then get a total of all the variable costs and the fixed cost. Get the total sales (actual or projected).
4. The following is the formula to determine the break-even point sales volume (BEPsv): BEPSV = Total fixed cost Sales - Total variable cost
'
Sales
Exhibit b % c Selling price $loo 250 500 600 d (a x 4 Total Sales 400,000 750,000 100,000 600,000 1,850,OOO
14 e % f Variable cost 50 100 250 300 h (a'x f) Total vc 200,000 300,000 500,000 300,000 1,300,000 Fixed cost 400,000 400,000 400,000 400,000
Product
Vzl Units
A B C D
ii 20 10 100
22 41 5 32 100
- 237 -
Based on the data in Exhibit 14, the break-even point would be: BEPSV = = $1 I8508:::yooo - $1,300,000 , = $1,344,950
X
'
Sales $1,850,000
In order to get the break-even sales volume in dollars for each product, multiply the break-even point in sales volume with the percentage share of each product to total sales (See Exhibit 15).
Exhibit
15
Product
Unit SP
Individual break-even in
Individual break-even in
100%
1,344,95'3
In order to get the break-even volume in unit for each product, divide the individual break-even in dollars by the unit selling price. As in the break-even analysis for a single product company, with the above formula, you can have different assumptions on the different variables and see the effect on the profitability of the company. In other words, with the above formula, you can see the effect on the profitability, if you change the selling price, fixed cost or variable cost.
- 238 -
LZMZTATZUNS 0F BREAK-EVEN ANALYSZS Although break-even analysis appears to be simple enough, it has some limitations, namely: 1. Difficulty in classifying or identifying some costs as variable or fixed costs.
2. Some costs do not move in a strai ht line as shown by the charts but more like a curve ( d ) or a stairway ( r+ I. 3. In the break-even analysis, we change only one variable at a time (e.g.g price) and assume the other variables constant. In many cases, however, if we change one variable, like price, it might also affect the other variables, like volume, which in turn affect profitability. 4. For a multi-product company, allocating cost common to all products may present a problem. 5. The information input for break-even analysis are usually based on historical relationship. This relationship, however, may not be stable over time. 6. Since the time horizon for break-even analysis is a short one, it is good only for short-time planning. Despite these limitations of break-even analysis, it can be a very useful tool for a manager, when properly used.
QUESTIONNAIRE
GUIDEL/
The guide is basically a series of questions encompassing the operational phases of a small business which Wiil enable you to analyze your business. The questions are broken down into the four functional areas of marketing, production, finance, and personnel organization. Accompanying each question are comments which do not supply definitive answers to the questions but provide a "reason why" for the questions and a direction for further study, when needed. The purpose of this guide is to highlight strengths and weaknesses in a firm's management policies and in their execution. It may be true that such strengths and weaknesses will show themselves eventually through a firm's financial statements. However, it is clearly useful to know them in advance. This selfanalysis is designed to help you eliminate weaknesses and capitalize on the strengths.
- 239 -
This questionnaire is based on the following assumptions: 1. There are broad, non-monetary principles of good management.
2. When too many of these principles are not being followed, the financial picture of a firm is likely to suffer. 3. It is possible to identify areas in a firm which are not well-managed and which, if unchanged, will impair the firm's financial structure. 4. It is frequently possible to identify these problem areas sufficiently in advance. 5. The present questionnaire can be used in indicating these areas. or a Na.
. .
--
COMMENTS
WLth the
exception 06 $2zm~ with on@ ha&$-z-dozen oh no mployeen, we&L-managed ua.aUy have dome ~OMII06 ottganLza;tion cha%A. Wjthout ha.Zh&i bpeci&Lc Tim 06 &hohi;ty which cute de&&ted by buch a chcU, ovtipp.hg h~clpotuibi.kXy can ccue ine,(&ient LLcle pehhonnel?oh othm h~oukm. 06 ln adcktion, where no cti czadbeen made, .Ltmay be did f;icuLtto pinpoint cuukin hebpon?sib.Ll!LGe.
cornpan&
- 240 Yes
2.
Do you encounter any of the following personnel problems? High turnover rate (number of personnel who left your firm in a given year) Absenteeism Relations between workers and management
No -
--
COMMENTS Good mana?emeti and good employee ne.laf(~tigo hand in hand. lrrayn Ro avoid thtie I2tobt5zm.s cnctude: a ciTea poL&y u.maLt~: in Wng, on absencefi;a good pay .incentivc ~cllemeto encouhage good and dtinving employees to ntiy; and an cmpeoyee buggention ~q~.te.m -to~;o!.Lcit vakk.ableidead and ope~~aaXon.& navingcs,M we.U a~ .Lmpkovecommutication channe.& i>etweenmanagement and lizbouh.
3. Have you delegated as much authority and responsibility as possl"bleto key members of your staff?
COMMENTS
D&egaR;ion 05 atihotiy hehUt% a double on the competence 06 yowr aupe~vi~o~. p~LfLpocse: (a) It taken you away (4om dtiai& and &YOWAyou mohe time 6Oh ativ&en connected tith yowz company6 management and ghowth; and !bl lf p4omo.W employee mode by giving gout subohdinaA# a chance to exehcibe .thcti LngenuiXy 504 Xheih own benedit and Xhat 06 Ahe company.
When you delegate authotity -to key membm 06 you/rHa,(fi, you me &ee to do otheh impotiant 6uncLioti. The exa?nX to which you do ~5~2, oh come, depen&
4.
.-
COMMENTS Itin di66icuL.tto maintain e~6icienl CJ~XULAXOYLE, each employee doti v?o;t 4 know Onty when the wha.t he and kin ,$&tow e.mpLoyecLs ahe csuppocled to do. Knowing youh job& acreundenntood can a company maintain good employee h&&on. 7-tphevetti employees @am neglecting wohk Thai job p&even& wohk dupLiction. hhould be done. lt ~3 h&p&l in phomo-t:ng ghowth in the job and in ditreting tie e66oti 06 dtinving emp,Coyea towcvzl-Y advancement &I YOWL organization. A.49 Zhtie objetivu mean g&owXh in a well-rn, (zaged bLCne?sn.
phetiely
5. Does each individual in your company know who, if anyone, reports to him?
- 241 COMMENTS Ingenmde, it .LAdangehoud 6oh one individual to have mo4e Xhan t;ive 04 clix peop.Ce4epoting ditrecX&j-to h&n. Once tkti numbeh ~2 exceeded, managing emp.l!oyeumay become Zoo uruuitidy,at Xhe expetie 06 max&um group e66iciency. When Lined 06 authoti.tyand 4enponkbtC-ty aRe tie&y known 20 a&? emp.toyee,s, each can do kin job mote e6,+ientty. ln w&-managed &timn, clatjeguti&agaiblnt m-te 06 human e6f;otime jwt an LmpotinX a~ Aa6egua&& agaitit w-c&e 05
matertiaen. Yes -No
6. Are you giving thought to the problem of what the organization of your company will be five years from now?
COMMENTS ln rnoclf phog&es&ve compatien, gtowth .i~ uppr~~ocltin the mindA of;the etieptreneti. Gtowth impk?ie~inJreacring need 6oh OhgfftiZtiOn. lack 06 thougti he.bfivC Xo .tti ptrobeemindicates Uhm a bad ~t,umption aboti yoti comqanyb &twre g&o&h 04 &ziluhe $0 coMnidm 15~2 6aCxOh. The ghotih-minded e&eplreneuh mubt &Lnk 06 fhe direction that h& company wiLf?atake. WLkY he expand kin phtieeM.t opehtionb 04 dive4bi{y? What Rype of;nu jobn wi&! he need a~ a MA&~ o 6 hip planned growth? The @wigtied ent4ep4eneuh mu.& a&,o couiden who .to de*xlop ah hia pocsaible 4~~~~404 UA -top man in the buninQcln. MARKETING 1. Does your company systematically review present markets and investigate and develop new domestic and foreign markets?
2.
Does your company try to find out detailed market potentials for its products?
3. Does your company continually appraise markets and customers to ascertain their relative profitability. 4. Does your company know the degree of market coverage which it has attained for each product? 5. Does your company periodically study and review the buying habits, preferences and needs of the various elements of its market?
- 242 -
COMMENTS To an incrrea&ng ex.tevr;t, we&?-managed @.m6 cutemating tiheh compkWe ask% The W~A ,jotrecaHti the cohnehiltone06 a&Z 6oaeuuti hevmal time-~ a yeah. 1-t,~OUIAthe bab.& 6oh phoduti.on pkZann.ing and con&ot, management pkknvkng . ,504 dtienmining Xhe e&e& 06 h&-L&g and admitia%tive pkogm, and t;oh ,$king the amount 06 aBLowab1e ovenhead. Are the following activities carried on as part of your company's marketing acti;ities? . . Analyzing customer preferences? Obtaining customer reactions to product specificat.ionsand prices? Preparing and keeping accurate records of advertising budgets? . . Testing the effectiveness of advertising? Developing sales catalogs, display materials, printed matter, dealer support and other promotional aids? Determining products to be sold? Formulating selling plans? Setting sales quotas? Preparing price lists? Setting performance standards? 6.
Yes
No
. . . . .
7. Are advertising and sales promotion materials and program closely coordinated with direct selling effort? 8. Are continual comparisons made between your company's advertising and sales promotional programs and those of its competitors? COMMENTS Marrktig in&ud~ a&T the poLici~, ~&WA and op~~~LLoti which move phodu& oh MJLV~C~ to Xhe uM.ma.te wetr. The act&CtLen mentioned in ;thtie que~Lion~ tie Wed on by mo& well-managed companien - clome ~otvn&y; othm ~.VI~O~YMLUY.
- 243 PRODUCTTON 1. Do you regularly establish clearcut output goals ana production schedules? 2. Are regular and complete production reports made? COMMENTS wti0u.t tidy e~!n;tabtiking ou,tpu;toab and ptodutin ~chedut~, Lt ~2 imposbible .to keep cohfa ad Low M .t q migti okhenuLid be. Mo6.tw&Qz-tu.n ii e @m appem to rrecognizefkib bat-tand make p~ov.iXon &oh 4uch planning. 3. Are specifications for your products worked out and agreed upon before you begin production? COMMENTS
aznbweh to tti question .ind.ica.te~ dwhabLe a and neWAh~Y eddo& on youa pan/tto know wha.t cu&omettj wunt be&he h.?kki%g XCJ phoduce the pmdud. Such in,(otia.tiort needed atoavoid deedyh, apoLkd in wo& and gwm C&oma Planned phoduct deve&opment &am the phodution h~:WI.dPo~ a dihhcI.tiA &x&ion. a mean.506 a.hhting smooth Opehationb &I yOWLpkd. A poative.
Yes
No -
4. Does someone have the final responsibility for the quality of your products? COMMENTS
the buck and not to p&point hespon&Lb.U.iXy dot CUL&Z&I .I%.&+ oh ghoup & a hign 04 weak management. TU phevent the O~V~OUA bad ebt$em ob Klidtipheai tL~ponhbi&ty, homeone shotid have tide hespovl6ibLf%y oven the Q-y 06 yowl p&oduti .
on one Pmofl 5. Are delivery dates regularly met?
A ftendewy
20 pass
COMMENTS Mews mmgeh. dtiveny daQ~ ~3 hILtis&! kin inaca,% among oatheh &i.ngh, the eageknebh Cf.a~omekh ah w&U a.b &A ability to do ho.
06
the
OWVWL-
5. Are your sales records regularly analyzed in order to obtain information which will help simplify production controls? COMMENTS Such an@&iA LA a [email protected] mY be WAY huCWh&ik? which .LA ,jhequetiy
ULithocLt cahn.yingon
a 6h
huch abtatyhti
- 244 -
7. Have break-even points been estimated for your company's operations? COMMENTS Sound p.tann&g LA p&cu.&&q imporrAant in well-managed cornpan&. To develop htz.atihtic, ~~ccescl&~Lplanning, you mwlt undatand ci5z.~~&y what in#?uence any ,itwm-be oh declreabe in ceh;taivr openating da&o& -- vo&,me, heiY.ingpticti, vtioun opehating expeti~, and plant and equipment hacL&Gen -- W have on yo uh pho ,$&t. Some .4mpotLtarct eddeotn 06 th~ne hevehae ,$ac;toti can be demon&hated by ejtibtihing bkeak-even pain& (Oh vahy.ing h-if%U,%OM. lnchecLningkZy, we&Tmanaged hm& &GUM a&e making heL& e,jboh.& Xo abcw&ain aA .&a&t hough brzeaheven PO.&&. 8. Is your cumpan continuously doing something to educare individual employees on how to reduce waste? COMMENTS Prratic&y a& manudactwing opetra;t;ioti have. hOtTIe ~a&&! in ma&X&, machine and men. 0pXLmu.mtie 06 aU Xhnee & fhe go& ofia w&-managed pk?ati. Manu~acUr,Lng COh$% can bc lowetred and pho&i.d can be inch&ah&d: (a) .i6 you know what mat-, machinti, and men ate bting wan&d; (b) ;A you ati cona%o& to heduce roan&; and (c) id you conduct Chaining phoghamh to &np.&?mev~X huch cotu?zol?~. FINANCE 1. Do you experience decreasing gross profit margins? COMMENTS
Ghobb pha&it A the hutio be,&ueenthe co& oh phodution (rntieG.a& P&U &boa and ovenhead) to u-&. loweh ghohh phu@Z would h&!d?t .intow,etr a&te.h-tax phoQi.X. Adequate ghohh ma&gin .x2 necenbcvry$0 cave,h 6ting and admi.ruAtiative expeti&% known a6 opmng pho&.t and @antiaL cha.hgu (intehent on bomowed rjundcll p.& a heahonablk a&x-&zx pho&i.X. De&tetiing ghoaa phoQL-t mahgi.n.h could be &aced to big h phiced a 6 inpti (matti& and labouh) , high pil,$e.mge 06 maXW, high tabout co&t due. to pOOh design and tow pticen due $0 compeLLtion.
Mmgemeti
phoductiv~y
mahgim.
- 245 -
COMMENTS When you tie yoti own dundd in businebA opWoti, you expect hctu~ which AhoLLednot be lowa than what the banb would ,give you on tie d&pa&& oh other hhoti-iWm invedAmena2. tow mtwrti on YOWL inve&nent could be &aced to high co& a 6 botiowed bun&. 76 th.i.6 -the ca6e, you hhouLd evaluate yowr *in howrcti 06 @ndh and heck cheupet dundb . High opUuz?Xng cob&, htz!&Xng and
adm&i&&u&ive sxpenbeh M w&Y! ~16phodution cod&s ahe immediate caubeb 06 Low hetwrnh . A detui-ted co&t an&yhA 06 opwLaLing a6 w&X a6 production cOhti could detwunke the uvrd&ytig catieb 06 demeaning pho&XabL4%y.
3. Do you experience any of the following? . Ratio of cash plus accounts receivable is less than 1% Growing accounts payable? Inability to get supplier s credit Delayed payroll? Growing accounts receivable? Yes No
. . .
COMMENTS A yes annwm Xo tnajotiy 06 thtie conditiovtdwould i&-L&e pOOh k!-iquid..Lty. UndeQying caudeh 06 declining L.iqu&i.Sy may be pooh pho&XabLLL-ty, undue ov&hbtocluhg 06 inventotiti, unde,hcapLtaLized opehatior~ oh t.wvtmonab& uLi;thtiti on Qxed abhti and inadequate. crred.Lt and cok&tion policy, by ownti avmpending hUL&.iHg in high &ade account.
A &ihhR &t&p to .!,okve pooh k?..iqtidLty ~2 to eva.&aie yoowt ched.iX and co.&!ection phocedwtti and impkmeti a mohe ~,j{ect.Lve dun& management to include the pheWaXion 06 cab 610~ and capiakk? budgei.
4. Do you experience difficulty in raising long-term capital? COMMENTS In addiLLon to you& ;rwn dun&. YOLJ,t opmati wi,U keqtie bomawed dun& w.Lth Long-RUrm maXu&Lty to @.ance dixed ah&t acqu.SLion and a potion 06 wo&.in.g Captid he@hemeti. V.i~&&~Lty in ti&i.ng &ong-tenm capi&& could be ticed Xc youh inabLi%ty ;ta meti the co.lTa..ttihequinemnntn 06 .the bunk 01% yowt pooh tie&X naknding with Xhe bank. Youtrmanagement capabi.&zXes may be ivz que&Lon In hptie 06 whu. youh awn inv~&nent A Zoo Low compatredto the battltowd&u&s. you good cnedit atinding Oh hoLid cot.J!u.tti, you mighat be hcahed to de& with banb oh you may lack the nectinaanyundehstinding 06 bomowing pticticen.
- 246 -
CHAPTER
IX
tmW~p)Lide hhadd be concaned no;tonLy wLth rntic bti a&o ti grrowth. To keep pace ulith .the dynamic economic env&~onmevLtand btiy compWve, the hm& manubactunw hhoued con&Ldeh oppotiniZies don .~pan&Lon, an d.iveh&jicaCon on bo;th. Expanbion ivulica;ten inu~wd e 0 6 Zhe hame ptoduC;t fine, wkiee [email protected] imp.t%h mohe lthnn one phodutztLine, mane Zhan one type 06 4fULViCeb 065ehed, tnohe Xhan one Xype 06 mankting channd oh va.&.Loud combinaf.Lonb 04 ;thtide and oiheh a.Uertna;tiveb. ChOOhing b&een fiede Auo ghotih paktehti WAXY depend on the pUvCt%g covuLiXio~ in an evuk~pti e and 42th envtionmeti. The avaLtabd!Aty 06 h~owiced, manpowm, &&ancing and dac.i.kXeb may hmVe a6 an index in h&?Ci%vlg tie. highA apptloach. Tkib Lh tihm c&iCCae in a hm& @m ah Ahe e.n.&q&enu udua.Uy has a VWJLOW petLcepaXon06 kin own buAine-hh p&he. IX Lb ,idd, thehe,johe, to heck the advice 06 +tCnduhM- conhtiti &om the govehnment Oh 6hom a )Y~&~tieghoup.
Nothing is constant except change. This is a truism that is more pertinent today than ever before. To survive and grow in business, a small enterprise has to be flexible and adaptable to the constantly changing needs of its environment. The more dynamic the environment, the more difficult it is for an organization to identify and implement the changes it needs to keep pace with. Managing a growing enterprise requires a fine coordination of people and systems. Like an organism, it has to be nourished and cultivated so that it will survive and grow. Survival in the business world is a feat in itself. Growing, of course, takes even greater effort. This chapter is intended to provide the small entrepreneur with useful information which would serve as a guide in coping with the changes taking place in his environment. Specifically, this chapter will define growth as it relates to the small enterprise, identify the indicators of growth, describe the basic growth pattern and suggests possible approaches to business expansion and/or diversification.
- 247 -
WHAT
IS GROWTH?
Which entrepreneur does not dream of growing ? And you are not an exception. Your desire for growth is deeply rooted on your need to achieve and to compete with others as well as with yourself. In a sense, therefore, growth, is a measure of how much you want to achieve. In the process of growing, you will try to reap profits from and flow back into the business whatever you have accumulated. You will continuously try to capture a bigger share of the market. And when you see an opportunity to prove yourself in other product or service lines, then why shouldn't you take it? Growth may be defined simply as an act or process of growing. An enterprise is said to be growing when it adds or develops a new product or service to its existing line in order to penetrate previously untapped market or when it extends its present facilities and improve its production system to be able to produce more, eventuallv enlarqinq its market scope. The basic qrowth patterns are divmiX&$ion. exbawionor both. This concept of growth will be'the basis of the succeeding'discussions. As to if of a small entrepreneur, you will be concerned w th two basic questions: When grow and how to go about it. The question of when to grow can be answered you are aware of the various factors that ind tate growth. Some manifestat ions growth in a small enterprise are:
1. When market share is maintained or increased without additional marketing efforts. 2. 3. When seasonal fluctuation is not a factor of sales and production. When there is an increase in net earnings.
4. When new product line is produced without necessarily increasing manufacturing facilities. 5. When there are positive results based on financial indicators , like fast turn-over, reduced debt/equity ratios, sales increase, less receivables, etc. 6. When there is a continuing and growing interest among investors.
The existence of some or all of these manifestations in your enterprise not only indicates sound performance but also signifies that it is time to grow. However9 you should be cautioned that growth requires careful planning and deliberation.
THE
MECHANICS
OF GROWING
As mentioned earlier in this chapter, the two basic growth patterns are diversification and expansion.
- 248 -
Diversification is defined as a product - market oriented approach to growth. This means that an enterprise adds or develops a new product line to its existing products and penetrates previously untapped markets. Advantages/disadvantages Some of the advantages offered by diversification are: 1. 2. 3. 4. Diminishes the adverse effect of cyclical variation. Increases potential customers by adding a new line of product. Offsets the effects of seasonal variation. Stimulates business with small additional investment and overhead.
Diversification provides a broader operating base from which to meet competition. It enables a small business to withstand the changing economic conditions in which it operates. And, it can help to avoid the risks of too much reliance on a single line.
Ricemill
Feedmill
Piggery
Slaughterhouse
Although it offers many advantages, there are also certain disadvantages involved in the process of diversificaticn. These include: 1. Dilutes of managerial ability.
There is a tendency to lessen management efficiency because of too much pressure from the various product lines. Hiring of additional management personnel will diminish the danger but will reduce as well the proportion of profits. 2. Creates new problems rather than solves existing ones
This danger may be clearly described with the following example. Mr. Lim has been managing a small retail furniture store for the last five years. Recently he was alarmed to find out that his sales and profits were declining even as competing stores managed to stabilize, if not grow. As a solution, he added electrical appliances to his furniture line. At the start, total sales
- 249 -
and profits did increase. However, when the appliance sales stabilized, total sales continued to diminish primarily because of a continuing decline in furniture sales. As it turned out, the diversification move designed to offset an existing problem, actually aggravated the situation by creating new problems of its own.
Generally, the desire to diversify is attributed to both externa factorswhichdirectly affect the operation of a company. 1. a. External factors Intense competition
and internal
Because of stiff competition, a company can no longer market its exist ing product profitably and looks for a new one in order to stay in business . For example, a small shoe factory that specialized in hand-made shoes competing with a big-name shoe manufacturer can diversify into the production of belts and handbags. b. Technological breakthrough
Technology is a very dynamic field. Because of constant changes, a need currently being served by a product is suddenly eliminated. For example, the production and sale of sliderules is phased out due to the introduction of electronic calculators.
C.
Spreading the risk over or tapping of opportunities offered by several industry sectors
This may be summed up in the old saying: "Don't put all your eggs in one basket." For example, a trucking company catering to grains, bottling and shipping company can diversify into the towing requirement of the autsmobile industry. d. Government/legal restrictions and considerations
When a government authority or instrumentality prohibits certain business practices in the wider interest of social welfare or economic development, a concerned enterprise can start looking for alternatives. The ban on the export of forest products to preserve natural resources, for instance, forces a tradingentrepreneur to go into the manufacture of these forest products. A concrete example is the manufacture of cane furniture. e. The need to be represented in growth markets and the growth sectors
Favourable market demand for a certain product encourages producers to diversify. For example, a boom in the wooden toys export market induces an existing woodworking shop which is in the handicraft line to enter into and be represented in that growth market sector.
- 250 -
f.
These changes, predominant in the "fashion glamour" industries, such as those also app lies to cars, houses, dealing in garments and accessories, furniture, etc. Example: The sudden disappearance of double-knit pants andthe entry of the jeans. 9. Lessening the effects of the business cycle
The seasonality of demand for a certain product compels the entrepreneur to add others into the product line. Example: A garment firm producing sweaters may venture into sportswear to offset the highly seasonal sales of sweaters during cold months. 2. a. Internal factors Original products losing out to substitute products
In time, the substitute products may turn out to be more saleable than the original product. Paint manufacturers, for instance, observe a fast declining sales of indoor and outdoor paints due to the gaining acceptance of wall paper and natural look finish of out-door walls such as the sandblasting finish and the synthetic adobe finish. Consequently, paint manufacturers are forced to improve the quaiity of paints and to develop new markets. b. Reclining or utilizing by-products and waste materials
In order to maximize production output,by-products and wastes produced in vast quantity are reprocessed or recycled. For example, rice mill with plenty of by-products in the form of rice hulls from its rice milling operations, can go into the production of hollow blocks utilizing rice hull as a raw material, or into the production of animal feeds utilizing rice bran, another by-product of rice-milling operation. Further example is a garment factory that decides to manufacture pot holders, doormats, and stuffed toys out of excess trimmings from the garment production.
C.
A company realizes that a gap in its current product range exists and takes steps to fill it. For example, a firm engaged in the production of food condiments such as fish sauce, vinegar and soy sauce realizes it has to manufacture tomato or banana catsup. d. Complementary products
A company sees an opportunity in the manufacture of products complementary to the one currently being produced, In the Philippines, for example, many metalworking shops tapped by car manufacturers under the progressive car manufacturing incentives program to produce spare parts of cars are already manufacturing products complementary to those subcontracted to them.
- 251 e. Maximizing production capacity, production affinity, research and development strengths and marketing affinity A company makes up for its weaknesses and exploits its strengths by making full use of its production capacity, production affinity and marketing affinity or relationship. Production affinities include those production related strengths which the firm can exploit like: available technical/scientific expertise and skills, multipurpose production facilities/machineries and equipment, strengths in research and development, materials which can be made into different products and reliability of raw material supplies. For instance, a company engaged in the fabrication of stainless kitchen equipment for the restaurant and hotel markets may diversify into the production of stainless kitchen equipment (portable) for the middle and high-income group household market. Marketing affinites on the other hand, refer to marketing mix strengths like well-dispersed channels of distribution, a popular brand image, unutilized sales force or marketing staff and strong and widely dispersed advertising and promotional programs. For example, a small-scale plastic games manufacturer, supported by an established distribution channel consisting of practically all bookstores throughout the country, diversifies into the production of paper clips, stationeries and stuffed toys. The above mentioned reasons for product diversification seldom occur singly. They are ir fact so closely interrelated that one factor may cause another. If the examples given seem simple and easy, do not be deceived. In reality, a decision to diversify is the result of a long and often tedious process.
Techniqueb
06 divmi&.Lng
By offering new product lines to a previously unattended market is a diversification technique. For example, since snow tires havemade inroads on tire chains, the chain manufacturer turns to other types of chains. 2. Service offered
New services are added to original services offered to clients and customers. For instance, a boatyard provides repair and drydock equipment designed to attract more customers. 3. Completing the product and/or service line
New products or services are added to make a full-line available. Thus, a phonograph records manufacturer may not only make a complete line of supplies but may offer repair service on record players as well.
- 252 -
The paduct
d.ivcst&i&&.ion pttocens
The following steps do no answer precisely your problem on how to diversify f your product or products.--/ Rather, they provide guidelines which will help you make a decision and formulate a strategy relating to product diversification.
1.
Even at this stage, you are already faced with a new-product development problem. At the same time that you are aware of your reasons and motivations to diversify, you may have to deal with equally compelling negative considerations such as: a. b.
C.
To develop new products and diversify is quite expensive. Most product ideas that go into product development never reach the market. Many of the products that do reach the market are not successful.
Do not let these negative factors dampen your enthusiasm prematurely. Keep them in mind, nevertheless,as you plan and deliberate on the diversification process. Among large and well-organized companies,product idea generation or gathering is handled by a group of product managers or product committee or some other "think tank." This group's principal function is to explore or generate new product concepts and ideas. As a small entrepreneur, however, you are your own principal "idea man." Of course, this usually limits the range and depth of ideas generated since your varied functions in managing the enterprise leave you little time for creative thinking. For this reason alone, it is not uncommon to see small and medium firms brashly imitating products of their competitors. It therefore, becomes necessary for you to organize the product idea generating process. Here are a few tips on how: a. Sources of new-product ideas
Generally, new-product ideas come from such major sources as: customer/clients, competitors, company salesmen, and top management. But such other sources as the following have been found effective:
. .
trade expositions, fairs and exhibits scientific journals, magazines, brochures and other publications foreign travels trade associations/organizations
. .
- 253 -
There are many other sources that can be cited, but it is useful to remember that ordinary people and commonplace tilingsyou see everyday can spark your imagination on a certain product. b. Idea-generating devices
From among the sources mentioned, one can think of a variety of new-product ideas. The process of generating these new-product ideas require a combination of guts, inspiration, persoiration and method. Individuals have different methods of stimulating their own creativity and companies have developed their own. Here are a few tested ones./
. Organized group experiences are a very common method of acquiring ideas. Normally a brainstorming session is headed by a chairman who is chosen from among the group to allow an atmosphere ofcordialityand the least restraint. The objective here is to stimulate greater creativity and a free flow of ideas. Brainstorming can be structured or unstructured. .
Forced relationships
This technique depends primarily upon the listing of a lat of ideas and then considering each one in relation to every other one as a means of stimulating the idea-generation process. For example, a manufacturer of wooden furniture who is seeking new product ideas might list all separate items he manufactures like desks, chairs, tables and cabinets. Then he starts free-associating the relationship between a desk and a cabinet. This may lead him to visualize the possibility of designing bookshelves, room dividers and many other office and household furniture items.
.
Attribute listing
This method involves the listing of attributes of a product and then modifying different attributes in the search for a new combination which will improve, if not totally redesign, the product. Chapter II, Exhibit 4 provides some useful guides in product-idea generation using the attribute listing device.
Z'Kotler,
Mmheting
Manageme&,
202-205.
- 254 -
Structural analysis This method consists of selecting the most important asoects of a problem or need and then examining all the relationships among them. For example, the fuel crisis has indicated a need for a deLice that can be utilized by an ordinary housewife both for simple cooking and baking purposes, regardless of the type of fuel. One dimension of this problem is the Xqpe 06 cooking device to use. This suggests such possibilities as stove, range, oven, etc. The second dimension is the m&&m which lthe device& made 06. This suggests such possible materials as: stainless steel, aluminum, cast iron, enameled steel, clay, etc. The third dimension is the ,$.L~R heqtiemeti, suggesting such possible fuels as wood, electricity, charcoal, etc. These variables are then combined into a threedimensional structure consisting of all listed attributes. The next step is to let the imagination flow on each cell or cube in the structure. Simply put, you are now ready to examine each interrelationship between and among these three dimensions. You will be surprised at the grea t variety of products that can be turned out from the structure. One such product is the multi-purpose cooker, now gaining in popularity among developing countries, which can be used for steaming, baking, fr,ying, etc. One will notice that in this idea-generating stage, the more product ideas that are brought about, the better. During this stage, quantity is the objective. Even the most unheard of or seemingly silly ideas are entertained. From here, these ideas are incubated or stored and later cut to pieces or screened. 2. Screening
The objectives of screening is to eliminate from further consideration those product ideas that are inconsistent with either company objectives or resources. The screening procedure varies from company to company depending on how sophisticated it is. Generally, larger firms have better and stricter screening procedures than smaller firms. Small entrepreneurs, on the other hand, tend to do the screening process right at the idea-generation stage. Another tendency among small firms is to use resource criteria as the predominant factor in their product diversification decisions. The screening process is also described in Chapter II. The above criteria, however, should not be applied rashly. You may not accept or reject a product idea without looking into its impact to the company as a whole. The need for an integrative means of evaluation and screening is, therefore, necessary. 3. Business
Analysis
Business analysis occurs not only at this stage but throughout the whole development process as new information is accumulated about the prcduct or products and the market. The purpose of analysis is to make the necessary rough estimate or projection on the future sales, profits, and rate of return for the proposed new product. Various methods 'can be employed incarrying out the business analyses. analytical methods are described in some detail in Chapter VIII . Several
A product idea that passes through the business analysis stage can now be turned over to the production department or the research and development unit. At this stage the idea is developed in "concrete" form. There are four steps involved in production development: preference testing, branding, and packaging. a. Engineering engineering, consumer-
Engineering studies involve the design of the product and development of prototypes or models. The objective here is to come up with a prototype that would be trouble-free, economical to manufacture, and appealing to the customers. Among big firms, many versions and variations are tried before a satisfactory one is found. Smaller firms, however, lacking in research and development facilities, are often satisfied with one or two prototypes. You can avail of the services of appropriate research and development agencies of the government. Completed prototypes are subjected to rigid tests and trial runs before the products are introduced into the market. Product specifications are verified through appropriate government agencies like the food and drug regulating bodies, departments or bureaus of standards, etc. For your protection against prospective imitators, register copyright office,whichever is applicable. b. Consumer preference testing your patents or
This test is normally carried out by manufacturers who are looking into the distribution of consumer preferences. There are different levels of a particular product attribute. Knowledge of this distribution becomes the basis for improving the prototype or for better product development. A manufacturer of candies for instance, may want to determine the best level of sweetness in an effort to improve his products. There are various methods of determining the distribution of consumer preferences. These include: oaired comparison, multiple choices and ranking procedures. Among smaii entrepreneurs, however, consumer preference is usually determined on the basis of experience, common knowledge and common sense. A small entrepreneur who desires to gain experience in more sophisticated testing techniques may seek the services of consultancy government malisting extension agencies or private consulting groups.
C.
Brand naming
The objective of brand naming is to build a unique brand name that will be eventually identified with your product. Today, the small entrepreneur is increasingly convinced that use Jf brand name is vital in marketing his products. Supermarket shelves seldom, if ever, display oroducts without brands. There are, however, products that do not require brand names, like many intermediate products.
- 256 -
Some businessmen tend to name or brand their product after afavourite child or pet or his spouse. Others thoughtlessly pick out a brand name from "out of the blue." Still, others are more imaginative and take brand-naming quite seriously and devote much thought to it. Some marketing research firms have developed such elaborate name-research procedures as: Association sets Learning tests Memory tests . Preference tests What images come to mind? How easily is the name pronounced? How well is the name remembered? Which names are preferred?
These tests are conducted to identify and isolate the desirable qualities,for a brand name. Commonly, a brand name should: Suggest benefits derived from the product.
. .
Suggest product qualities. Be easy to pronounce, recognize, and remember. Should be distinctive. Short names help.
Again, to protect your interest as a manufacturer against possible imitations; brand names should be registered with the government body concerned. d. Packaging
Developing the package for a new product is a joint concern of marketing and production collaborating with some technical specialists. In the Philippines for example the Design Center Philippines (DCP), extends free packaging design, In Malaysia the government a cncy services to small and medium industries. to approach is Standards and Industrial Research Institute of Malaysia 9SIRIM). In developing the package, the following objectives and functions into consideration: are taken
. Product protection and economy - A packaging design should be chosen that will protect the product during its shelf-life from the manufacturer to the distributor and end-user. It should be -of lowest possible cost without sacrificing other marketing objectives and considerations.
Consumer convenience - Always keep consumer comfort in mind. Packages that are easy to open, handle, display, carry, etc., are often to be preferred. . Promotional value - The package should perform the following sales functions:' attract attention, describe the product's features, give the consumer confidence, and make a favourable over-all impression. It should support and reinforce the brand personality the company is trying to build.
- 257 5. Test-Marketing
The most obvious reason why test marketing should be made is to determine the reaction of potential customers and distributors. The desirability and eventual sticcessof the product,as weii as of the marketing program,largely depend on testmarketing. The underlying benefits that can be derived from test-marketing are:
Test marketing enhances your knowledge of potential production sales. it also enables you to pre-test or develop alternative marketing plans. The results of your test marketing may provide a basis for further product improvement as well as invaluable clues regarding distribution level problems. There are other strategic reasons for test-marketing, namely: a. To observe competitors' marketing behaviour/reaction in relation to the new product introduced; b. To determine strategic area (market segment) concentrations; and
C. To gain richer understanding of product competitiveness and the proper marketing mix of your products.
There are various questions that should be considered in test-marketing a product. These questions wil! help the businessman draw up his marketing test plan. a. How many test cities or localities should be used as test markets? Should test marketing be confined to nearby areas? Are these selected areas representative of the target market? Are the costsaffordable considering the company's financial resources? b. Have these specific cities/localities been identified by research organizations as ideal for market testing a particular product?
C.
Who are your respondents for the market testing? Define each.
customers?
distributors?
d. How long should the test run last? How much should it cost? A test-run should be long enough to get the desired results and short enough to prevent competition from catching up. e. What data should be collected during the test?
. Product-transport data: frequency of transport; shipping, hauling, etc.: volume of transport; changes in shipping schedules, . Store audit: repurchase period; frequency of purchase; sales performance; competitive product terms; shelf life; observable buying habits; customers' comments. . Buyer surveys: buyers' reaction/comments on in usage, functions. etc.
Test results should be evaluated on the basis of the object ives and guide1ines set by the management. In the eva uation process however, the changes on the economic environment from the time of the launching to the time of evaluation, Also, a review on the general economic should be given due consideration. environment should be made to make possible adjustments in the marketing plan. There are different methods of eva uating test marketing results just as there are many ways of screening product ideas. Whatever methods or techniques are employed, there are generally four possible actions after the tests to commercialize the product; to redesign or improve it; to improve the marketing mix; or to drop the product altogether. Rememberthat only a few groups of product require test marketing. These are mainly consumer products. Among small-scale enterprises, test marketing may be done but on a very limited scale because of the cost involved. In very small business operations, limited test marketing can be conducted among friends and relatives. However, the result may not be very accurate and reliable. 6. Commercialization
The product which passes through the test marketing criteria is ready to be commercialized. At this stage, all attributes of the product, including packaging, must be finalized. The marketing program should be finalized as well. The next step is to organize the necessary production requirements for commercial operations. Is there a need to purchase additional equipment, hire additionallabour, expand facilities? If so, should sub-contracting be resorted to? The easiest entry into commercialization is the consideration of a pre-need study on the production and marketing affinitiesof the company discussed earlier. From there, you can start the commercial manufacture of your product based on your sales forecast and corresponding schedules. Product entry strategy Depending upon the type of product and/or the feedback generated during the test marketing process, product entry to the market varies. Planned market entry involves a gradual entry of the product into the market. This often involves hitting first the primary market which might include the market nearest your production or business area. Then, the second and tertiary markets are penetrated. The expansion in the outlying areas is effected only after launching in the nearest and prime areas have been completed. This also involves the choice of utilizing first the wholesalers, before attempting to channel the product among retailers, who normally get their merchandise or products from wholesalers.
- 259 Still another approach under the planned market entry is the utilization of the direct selling approach. This can be accomplished by the use of salesmen or friends. The objective here is to introduce the product at a faster pace and -I--to create a need frm arwrly the retailers and whoiesaiers to carry the product. This is a reverse method compared to the one discussed above. Instead of going to the wholesalers first, go to the users/customers directly. The "shot-gun" market entry involves a one-time national-scale market launching. This applies particularly to shorter life cycle of fad items. But this method involves a bigger investment and more manpower. This method involves the utilization of all possible channels at the same time as well as the use of salesmen. The objective here is to f?ood the market with the product to minifflize, not prevent, competition. if After the launching, there should be careful monitoring of the product's behaviour in terms of sales, profit contributions, and sales turn-over, over the product's life cycle. Then a thorough evaluation should be made for management to ..i~~termine there is a need to up-date, modify, improve or otherif wise innovate the product itself and/or the marketing strategy, Remember that this process repeats in cycle each time you add a new item into your product line.
It is clear that diversifying is not easy. But if planned carefully- using the broad guidelines suggested above-diversification can be worth all the effort in terms of financial gains as well as the entrepreneurial satisfaction that your business is g&ow&zg.
EXPANSZON While diversification is a profjuct-marketoriented approach, expansion is a pattern of growth whereby an enterprise increases the production of its existing products or services in an effort to augment returns on a long term basis with the objective of strengthening both the external and competitive position and the internal efficiency of the business. AdvanLag e6ltiadvantag~ Primarily, the advantages of the expansion process lie on the relative simplicity of work to be donecomparedto diversification. Unlike diversification which requires a thorough revision of its present production set-up, in order to accommodate the new product, the range of a firm'sactivities is largely unchanged in expansion. This is because the firm will be producing the same products at a bigger scale. Another plus factor in expansion is that personnel will be involved in basically the same work with which they are already famitiar. This will, therefore, ensure a smooth flow of work in spite of additional workload. The main constraint in expansion is the lack of flexibility among workers. Because of too much concentration in a particular job, there is a tendency for these workers to be unmindful of other jobs as long as they perform well in their respective specialization. The main concern is that no worker is able to pitch in on another particular job in case a problem arises due to lack of knowledge.
h
- 260 However, this limiting factor can be prevented by training workers on the whole production process as well as informing them on their important role in the system. Training may be in the form of workshops or seminars. Proper motivation wiii encourage workers not oniy to excei in their assignments but to try other jobs as well,thereby enhancing the versatility of r worker .
An entrepreneur's desire to expand his production output is influenced by several factors. These include:
3.
Enlargement of market. A favourable demand from previously untapped segments of the markc!tencourages increased production.
4. MaxGmum use of reserve capacity. One way of maximizing an operation is by increasing its Produ~~:;;;~ titi:Put.
The expansion process involves a careful analysis and evaluation of external and internal factors directly affecting a company's operations. The following procedural gufdelines will be useful to the expansion-oriented small entrepreneur:
- 261 -
1.
One way of determining the need to expand is through market research. A need may either be apparent or not. Market research at the customer level can often help you determine the performance of your product compared with those of competition. 2. Analyze the need
List down on paper the facts about the problem and write opposite each item a personal evaluation of its influence on the total situation. Do as much advance planning as you can so as to avoid having to make hasty decision under pressure. 3. Determine and evaluate alternative solutions
When you have determined and understood fully the problems involved, write down alternative solutions. Then choose one that can best help the situation. The "ideal" expansion pattern is one that considers the existing production technique, marketing channels and personnel and requires minimum financing. In practice, however, this ideal can seldom be reached. Hence, it is necessary in making a final decision to take into account a number of constraints, including the following: a. Ability of management
How capable are you as manager? What about your assistants and key personnel? Will you be able to handle efficiently the operation of your enterprise if it expands? These are just some of the basic questions to be answered of management when planning to expand. b. Resources at hand or obtainable in the enterprise
Before selecting fern alternative solutions you should take a close second look at the available resources. In some cases, it pays to secure new resources and move into areas previously unexploited.
C.
Available financing
HOW do you intend to finance the ex ansion? Can you obtain funds interna.llyor from an outside source? If one of ehe proposed alternatives requires the availability of outside capital, then funding automatically becomes a limiting factor. Furthermore, if yours is a closely held business, you would be compelled to open it up to outsiders. Be sure that you are willing to do this. d. Marketing possibilities
The marketing process may also impose limitations on the choice of alternative solutions; that is, a particular method of selling may be successful for a certain market. All production cannot be forced through a given trade channel merely because the manufacturer has already developed that channel.
- 262 -
e.
Onceyouhave decided on a course of action, the next step would be to plan to the selected alternative. The proper way of doing this is to put, execute the plan in writing showing in detail every aspect pertaining to the management, technical, marketing, and financial aspects of the plan. Describe in detail the resources and manpower and the proper "mix" of men and machines required to turn out and market the product. Because of the dynamic conditions prevailing in the business world, be prepared to revise the work %--\ plan from time to time. f. Follow-up and evaluation
After the expansion has been undertaken, it is necessary to assess the results on a continuing basis. Carefully monitor the behaviour of the products in terms of sales/profit contributions and sales turn-over. Evaluation will help you determine if there is a need to up-date, modify, improve or otherwise innovate the product itself and/or the marketing strategy. In addition to this, you should be able to diagnose the effects or impact of the product to the industry in particular and to the economy as a whole.
- 263 -
APPENDIX1
ENTREPRENEURIAL
SELF
ASSESStENT
SCALE
The following statements reflect some thoughts and actions of potential as well as existing entrepreneurs. As you read each one, ask yourself, "HOW strongly do I feel and think this way?' Rate yourself according to the following scale by writing the appropriate letter on the space provided before each statement: SA A
?
Strongly Agree Agree Not Sure Disagree Strongly Disagree ANSWER ALL ITEMS.
D SD
When a special problem arises at the end of a hard day's work, I still find myself with reserve supply of energy. Mistakes and failures overwhelm me sq much I can't learn from them. I find it hard to beg,that is, to ask favours from other people. I want to earn only as much as to attain a comfortable way of life. The knowledge, experience and training I have on my proposed business is inadequate. While my product/service may not entirel,ybe new, I am thinking of new and better ways to make it competitive. It is not neressary to be scievltific and rational about management as long as one has the luiee to do what he wants done. I don't find difficulty in convincing other people to trust my ability to succeed. I don't choose ta work with unlovable, unpopular people even if doing so is most useful for me to do achieve my goal. I need not waste time and money on "market research." sells, Ill go on producing.
3.
A. .
5. 6.
7.
8.
9.
10. 11.
If the product
- 264 -
Appendix 1 Cont'd.
I don't see the importance of reading the newspaper everyday. I don't fear investing my money on a venture whose dividends I have calculated. 14. 15. 16. 17. 18. 19. 20. 21. I believe problems and barriers can be turned into opportunities that can be exploited. The health and vigour I display is stimulating to others. I can't be away too long from my business because no one else but I can manage its activities. I don't get upset when given negative feedback about the way I perform. I have weaknesses and fears that are far from being resolved. When I do something, I see to it that it doesn't only get done but done excellently besides. I accomplish most when I'm alone , under no direct supervision of anyone. I don't enjoy working in a team as a leader. I'd rather be a member.
I doubt my ability to cope under new, untested conditions. It is I, not luck nor fate, which influence the outcome of events in my life. I hm frequently ill. I don't enjoy outcomes, no matter how favourable, if they don't stem from my own efforts. I wait for other people to originate ideas and action. I find nothing wrong in consulting expert advise regarding how I must manage my business.
30-40%.
I consider a customer who complains against my product a bubblemouth negativist. I will consider a risk worth taking only if the probability for success is 60-100%. Stress and tension lessen my efficiency. :ions. I am unprepared for the outcome of my act
30.
31.
32.
__
--
--
- 265 -
Appendix 1 Cont'd.
33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 45. Pg.
I can be directive as a leader but in a way that makes people willing to follow me. I don't allow failures to discourage me. I don't mind routine, unchallenging work if the pay is good.
I am unwilling to work more than eight hours a day. I enjoy activities where I get information on how well or how bad Im doing. I imagine how frustrated I would feel if my project should fail. I take pleasure in responding to challenges, so competition makes me work harder. I like change because I tend to be mobile and discontented. I will consider a risk worth taking if the probability for success is 40-60%. I am unwilling to change my mind,once it is made up, even in the face of new developments. I usually feel weak and faint after a day's work.
I believe success is a product of luck and fate rather than personal effort.
I believe that sole proprietorship is the best form of ownership for a business to succeed. I avoid changing the way things are done.
My abilities are above average.
50.
51.
52.
53.
- 266 -
Appendix 1 Cont'd.
54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73.
I have difficulties in obtaining loans from people. I can't wait and watch things happen; I prefer to make things happen. I don't give up easily, even in the face of difficulties. I am willing to take substantial risks for substantial returns. I hire people on the basis of friendship and other relations (for their loyalty) rather than on the basis of competence. I am willing to accept both positive and negative consequences of my decisions and actions. The knowledge, experience and training I have on my proposed business is good enough. I don't think of negative consequences to acts and decisions that I make. I don't care if the profit is small so long as it is assured and constant. I lack vigour and vitality. I find no reason to consult other people about how to run my business better because I'm satisfied with the way I run it. My competence is better than that of the ordinary man in my community. I find difficulty in asserting m,yself against the opinion of majority. Even if I am capable, hardworking and ambiticus, if I don't have the money, I.can't start a business. I don't get discouraged by an initial "No" from a buyer because I am usually able to convince him inevitably to buy my product. I am able to beat around difficulties through strokes of ingenuity and resourcefulness. When I fail in a goal, I immediately turn my attention to another goal. I cannot see the future as bright and promising. I don't allow myself to think of the future as dim and gloomy. I tend to overestimate my capacitie s for succeeding in any venture.
- 267 -
Appendix 1 Cont'd.
74.
As an entrepreneur, I need to practise basic managerial skills so that my business need not be a one-man show but a concerted effort of myself and those who work for me. The people around me now doubt my capacities to start and run a business successfully. Once I have started on a task, I usually carry it to its completion. I try to know more about the life stories of successful businessmen. I am willing to give up full control over my business in order to welcome new associates whose funds and expertise will be beneficial to the business. In business, I am more concerned with growth (being a success) rather than with profit. I find it difficult to come up with new, wild or even crazy ideas. I don't like a job for the good pay I get but for the satisfaction and sense of accomplishment I derive from it. I fear moving into a new undertaking I know nothing about. I am'unable to work consistently on a goal when I meet some obstacles. I find myself working harder under stress.
75. 76.
77. 78.
79.
I am
I believe there are always new and better ways of doing things. I prepare for troubles befcre they arise. I make use of records, books and reports when setting goals for the business.
It
I want to have good knowledge of my market before I start my business. I have never tried introducing new products to the market and I don't think I want to try. I have confidence in my ability to achieve. I don't mind working under conditions of uncertainty as long as there is a reasonable nrohability of gains from it for me.
- 268 Appendix 1 Cont'd. 94. 95. 96. I see to it that I am an expert in the product I'm selling. I am healthy and fit for stressful work. I meet and solve problems as they arise.
Your score on the 96 statements above are meant to indicate the level to which you exhibit or tend to exhibit twelve characteristics associated with successful entrepreneurship. The table on page 269 presents a 1isting of these characteristics and provides some space for summarizing and scoring your answers to the statements. To use the table, first, record your answers (SA, A, ?, D, SD) on the line immediately below the item indicated. Note that the items are arranged in rows and in two columns. Each row represents a characteristic and the two columns represent the way of scoring your answer. Items in Column 1 are positively coded items, and those in Column 2 are negatively coded. Positively coded items (Column 1) are scored as follows: SA A ? D SD 5 4 3 2 1
1
2 3 4 5 Example:
Record your score on each item on the line below your answer. Rating Score
Item
13
A 3
41
- 269 -
Appendix 1 Cont'd.
Your total score for each row indicates the level at which you exhibit or tend to exhibit the characteristics. Scores are classified as follows: High 32 to 40 17 to 31 3 to 16
Medium Low -
To give yourself a picture of your strong and weak points, plot your scores on the graph below by connecting the dots corresponding to your scores on each scale. Low .
. . . . . . . . . .
l .
Risk taking Hope of success and fear of failure Persistence and hard work Energy and mobility Use of feedback Personal responsibility Self-confidence and self-reliance Knowledgeability Persuasive ability Managerial ability Innovativeness Achievement-orientation
Medium .
High . .
. . .
. .
Low
Medium
High
Scores plotted on the left hand side indicate your weaknesses, those on the right hand side, your strengths. Do you have more strengths than weaknesses? What does your picture look like? Are most of the scores located on the right side? Or are there several points on the left which tend to pull the points on the right? How do you feel about the picture? The essence of taking "tests" such as this is not to feel good or bad about your score. Remember that while you don't have to prove anything to anyone, you owe it to yourself to make use of the information. Refer to Chapter 1 on Entrepreneurial Self-Assessment for discussions on entrepreneurial characteristics.
II Row 1 ~ Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 Row 8 Row 9 Row 10 Row 11 Row 12 Risk-taking Hope of success & fear of failure
--
38 5s 15 --T25 47 65 49 33 -51 39 -.
34
Persistence and hard work
87 --
32 11
61 36 -31
71 -m
96 -7
70
a3 63
-
1
Energy and mobility
95
24 2 21 ia
17
Use of feedback
88 59
42 -26 22
10
---
64 48 67 52 _89
-
-Personal responsibil.ity
23 20
60
Knowledgeab'lity
94
5 3 -7
a
Persuasive ability
85 78 86 81
54 --K--53 --9 --
27
Managerial ability
50 -91 58
A L
6
Innovativeness
46 4
19
Achievement-orientation
--
- 271 -
APPENDIX
FORMAT
FOR
PROJECT
FEASIBILITY
STUDY
I.
SUMMARY QF THE PROJECT A. B. C. Name of the Firm Location: Head Office, Factory Brief Description of the Project 1. 2. 3. 4. 5. History of Business Nature or Kind of Industry Type of Organization Organization Chart Officers of the Business and their Qualification
II.
Areas of Dispersion Methods of Transportation and Existing Rate of Transportation Channels of Distribution and General Trade Practices
2.
Demand a. b.
C.
Consumption for Past Ten (10) Years Major Consumer of the Products Projected Consumption for the Next Five (5) Years
3.
Supply a. Supply for past ten (10) years, broken down as to source whether imported or locally produced.
.
. b. 4.
For imports, specify form in which goods are imported, price and brand. For locally produced goods, the companies producing them, their production capacities, brands and market shares shall be specified.
Competitive Position a. Selling prices - includes a price study indicating the past domestic and import prices, the high and low prices within the year and the effect of seasonally, if any. Competitiveness of the quality of the product.
b.
- 272 -
Appendix Cont'd.
C.
Marketing program
1.
2.
Description of present marketing practices of competitors. Proposed marketing program of the project describing the selling organization, the terms of sales, channels of distribution, location of sales outlets, transportation and warehousing arrangements and their corresponding costs. Promotions and advertising plans, including costs. Packaging
3. 4. d.
Projected sales
1.
Expected annual volume of sales for the next five (5) years considering the demand, supply, competitive position and marketing program. Sales contracts, if any.
2. e.
1.
2. 3.
Net annual amount of dollars earned or saved, and basis used Labor employed Taxes paid
III.
1. 2.
B.
Description of the product(s) including specifications relating to their physical, mechanical and chemical properties. Uses of the product(s).
Manufactured Process
1.
Description of the process showing detailed flow charts indicating material and energy requirements of each step, and the normal duration of the process. Alternative processes considered and justification for adopting said process. Technological assistance used and contracts, if any.
2. 3.
- 273 -
Appendix 2 Cont'd.
C.
Plant Size and Production Schedule 1. 2. Rated annual and daily capacity per shift, operating days per year, indicating factors used in determing capacity. Expected production volume for the next five (5) years considering start-up and technical factors.
D.
Machinery and Equipment 1. 2. 3. 4. 5. Machinery and equipment layout, indicating floor plan. Specifications of the machinery and equipment required indicating rated capacity. List of machinery and equipment to be purchased and origin as to local or imported. Quotations from supplier, machinery guarantees, delivery dates, terms of payment and other arrangements. Comparative analysis of alternative machinery and equipment in terms of cost, reliability, performance and spare parts available.
E.
Plant Location
1.
2.
Location map showing plant location Desirability of location in terms of distance from the source of raw materials and marks and other factors. Comparative study of different locations indicating advantage and disadvantage (if a new project).
F.
G.
Building and Facilities 1. 2. 3. Types of building and costs of erection Floor area involved Land improvement such as roads, drainage, etc. and their respective costs
H.
Raw Materials
1.
2.
Description and specifications relating to their physical, mechanical and chemical properties. Current and prospective costs for raw materials; terms of payment and long term contracts, if any.
- 274 -
Appendix 2 Cont'd.
3. 4.
Availability, continuity of supply and current and prospective sources. Materials balance or material process chart.
I.
Utilities ies indicating the uses, Electricity, fuel, water, steam and supp1, quantity required, balance and utilities , availability, sources and tentative sources and costs.
J.
Waste Disposal
1.
2. 3. 4. 5. K.
Description and quantity of waste to be disposed of Description of the waste disposal method Methods used in other plants Costs of waste disposal Clearance from proper authorities or campliance with legal requirements.
Production Costs Detailed breakdown of production costs, indicating the elements of cost per unit output.
L.
Labor Requirements Detailed breakdown of the direct and indirect labor and supervision required for the manufacture of the product(s) indicating compensations including fringe benefits.
IV.
1.
Audited financial statements (balance sheets, income statement;, cash flow) for past three (3) years to reflect the following: a. b. aging receivables schedule of fixed assets showing capitalized cost, estimated useful life. and depreciation method used. schedule of liabilities, tax assessments and other pending claims or litigations against the applicant, if any. financial trends and ratio analysis
c <.
d.
- 275 -
Appendix Cont'd.
e,
2. 3.
Financial projections for the next five (5) years (income statement, cash flow, balance sheets). Supporting schedules to the financial projections, stating assumptions used as to: a. b.
C.
collection period of sales inventory levels payment period of purchases and expenses elements of production cost, selling, administrative and financial expenses.
d. 4. B.
Financial analysis to show the rate of return on investment, return on equity, break-even volume and price analysis.
For New Projects 1. 2. 3. 4. 5. Total project cost (fixed and working capital). Initial Cz$'l':,-'i ie<iji~'e~,~nts. Pre-operating cash flows relative to the project time table. Financial projections for the five (5) years of operations to include balance sheets, income statements, cash flows. Supporting the schedules to the financial projections to include: a. b.
C.
collection period of sales inventory levels payment period of purchases and expenses elements of production cost, selling, administrative and financial expenses.
d. 6.
Financial analysis showing return on investment, return on equity, break-even volume and price analysis.
- 276 -
APPENDIX
LIST
OF
FINANCIAL
INSTITUTIONS
1.
ln Bang-ladebh
0
Bangladesh Small and Cottage Industries Corporation (BSCIC) for investment promotion, project identification, feasibility studies and arranging small industry loans. Bangladesh Shilpa Bank
.
.
. . . . . .
2.
Tn Fiji
. . .
Fiji Development Bank Fiji National Provident Fund Fiji Devc'opment Company, a subsidiary of Commonwealth Development Corporation, insurance companies and commercial banks
3.
In Ko/reu .
.
- 277 -
Appendix Cont'd.
4.
Zn lndone6ia .
. . Indonesian Bank (B.I.), government owned (Central Bank) Commercial banks owned by the government (BRI,
Indonesian Development Funds Cor,poration (UP?INDO) Indonesian Credit Insurance Corporation (ASKRINDO) Cooperative Credit Insurance Institute (LJKK)
.
. . 5.
ln .
. . .
Matayh.ia
Majlis Amanah Rakyat (MARA) Credit Guarantee Corporation (CGC Development Bank of Malaysia Agricultural Bank of Malaysia Malaysian lndustrial Development Finance (MIDF) Other commercial banks
. .
6.
In Nepal
. . . 1 Nepal Industrial Development Corporation Agricultural Development Bank Rastriya Banijya Bank Nepal Bank Limited
7.
In the . . . .
Pkieippiner,
Development Bank of the Philippines (DBP) Philippine Nationa? Bank (PNB) Private Development Corporation of the Philippines (PDCP) CB-Industrial Guarantee and Loan Fund (IGLF) CB-Investor's Guarantee Fund (IGF)
- 278 -
Appendix 3
Ventures for Industries and Business Enterprises (VIBES) Other commercial banks
* 8.
In !ZngapoW . Economic Development Board (EDB), Development Bank of Singapore (DBS) and the Overseas Chinese Banking Corporation (OCBC) created the Small Industries Finance Scheme (SIFS) provides working capital to existing viable projects. Singapore Manufacturers Association (SMA) Small Industries Development Programme
. .
National Development Bank of Sri Lanka (NADB) - This newly created bank assists small entrepreneurs in obtaining finance through five (5) commercial banks, namely: Bank of Ceylon, People's Bank, Commercial Bank Ltd., Hatton National Bank, and the Development Finance Corporation (DFC) under Small and Medium Industry (SMI) Loan Scheme. Loans are provided at low interest and on easy terms and repayment period extends up to 13 years with a grace period of up to 2 years. Central Bank of Cevlon - Loans aranted to the small and medium industries under the SMI, sch<me are guaranteed by the Central Bank of Sri Lanka, on behalf of the government. Under this guarantee cover, Central Bank guarantees up to 75% of the loans granted. Sri Lanka Export Credit Insurance Corporation (SLECIC). was created'to help the exporters. This corporat ion
10.
In Thaikknd . .
Department of Industrial Promotion (DIP) provides credit facilities through the Small Industries Finance Office (SIFO). Other commercial banks
- 279 -
BIBLIOGRAPHY
Chapter I
Maslow, Abraham.
and Pvr~orzuLLty.
Harper,
1970.
Chapter II Opportunity Identification and Project Selection PtrojectFmib.LLLty Andy&i~~ - A Guide New York: John Wiley & Sons, 1977. Englewood Cliffs,
Kotler, Philip. MNtkeZ&g Munagemeti. 3rd Edition. New Jersey: Prentise-Hall Inc., 1976. Osborn, Alex. App.&ed Zmaginution. Sons, 1963. Radha, Sinha. 3rd Edition.
New York:
Charles Scribner's
Agtibusinesd:
A Ntiance
in Evu~y Abpeti.
Soriano, Emanuel and Lee C. Nehrt. Bu.kLmm PaLicy in Abian Cotieti. Mandaluyong, Metro Manila: Sinag-Tala Publishers, Inc., 1976. Chapter III Planning and Organizing a Business Phojeot Feahb.&Xy Anaty&Ls: A Gtie New York: John Wiley and Sons: 1977.
Cliffton, David Jr. and David Fyffe. fo Pm&X.xb.t~ N~UJ VeyLtwta. Goodman, Louis J.
1rztegka.W
and Ralph N. Love. Pmject PtmznLng and Management, Apptoach. New York: Pergamon Press, 1980.
An
Ranada, Tomas J. Uow Ro S.&&.X Yow Own Smu.U Bu6ineAA. Manila: Echanis Press. 1978. Sharma, S.V.S. Sm& New Delhi:
Mandaluyong, Metro
Entte~enemid
- 280 -
Chapter IV UP ISSI.
Managing the Enterprise "Overview of Small Industries in the Philippines" (mimeo), 1980.
Cohn, Theodore and Roy.,A.Lindberg. h'cw!&.vla.gernetiV-iA~enent in Sma&Z is 1972. Companies. New York: American Management Association, Inc., Takanaka, Akira. Pmb1m 06 SrnaU f%bhL4A Marqemeti .in Vev&op-ing . Overseas Technical Cooperatix Agency, May, 1970.
CoutieA
Schollhammer, Hans and Arthur H. Kuriloff. E&u~Aenewtil~ I;? avd StndC &iAimAA MaMagem&. New York: John Wiley and Sons, Inc., 1379. Interviews with Officials of the Participating Organizations of Technonet Asia, 1980. Sangston,,H, Earl. Sugge&ed ManagemeG Guide.&. Business Administration, 1962. Chapter V Marketing Management Washington, D.S.: Small
Benett, Peter D. and Harold H. Kassarjian. Cotiumen 8ehaviowr, New Jersey U.S.A.: Prentice-Hall Inc ., 1972. Kotler, Philip. Manhang Kuhlmeijer H.J. London: Prentice-Hall, Inc.$
Ma.n.ugmeti.
1976.
ManageGa.t
Math tiny.
1975:
Schoolhammer, Hans and Kuriloff',Arthur, Etinepxeneumtip and SmaXkZ&&h&56 Mamgment. New York: John Wiley and Sons, Inc., 1979. Stanton, William J. FutiW Ltd., 1971. McGraw-Hi11 Kagakusha
06 Mmkting.
Japan:
C-teaaXng a Mu&et.
Switzerland, Internationd1
- 281 -
Chapter VI
Barnes, R.M. Motion and Time Study: Deb&n F Mmunemeti 5th Ed., New York: John Wiley & Sons, Inc.-,1963. International Labor Organization. In&oducCon 2nd Edition. ILO, Geneva. 1971.
to Wohk SRudg.
Nagashima, Soichiro. 100 Management CIuur&. Productivity Organization, 1973. Chapter VII Financial Management
Abde 1samad, Moustafa H., et. al. 14 Financiae S.A.M. Advanced Management Journal Management !,ssociations, 1977.
Bindenga, Andre' J. Sotne E~sen$hd!~ 06 MarzagementAccounaXng and Finance, The Netherlands: Moret and Limperg, Accountants, 1976. Horngren, Charles T., Cost Accouting, A Managed& Emph.ahs, Englewood Cliffs, New Jersey: Prentice Hall, Inc., RVB, Management Accounting, Delft, Holland, n.d.
a SmaU
Small Business Administration, owning and Opmng n.d. Small Business Administration, Management ti& Welsch, Glenn A., Budgting: Cliffs, New Jersey, Weston, J.
likktinenb,
Unit 7,
6on SmuU
P&o&X P.&v&g
Fred and Brigham, Eugene F. ManagU Halt, Rinehart and Winston, 1978.
6th ed.
USA:
- 282 -
Chapte,?VIII
HOW
Buchele, Rober B. Budine66 Poticy in Ghowing Fi& California: Chandler Publishing Co., .,. tiorngreen,Charles T. New Jersey.
Co& Accouting
$oh Pho&X CotioL. New York: McGraw International Student Edition, 1966.
New Rochele, New York, South Western
Account cng . Moore & Saedicke. Manag e&d Publishing Co., 2nd ed., 1967.
Rausch, Edward N., Finunti
New York:
Amacom,
1979.
Chapter IX Expanding and Diversifying the Enterprise SmlLeeMmk&enn kidn,
Anthony, E.L., "Meeting the risk of Change." Annual No. 6. Bates, James and J.R. Parkinson. Blackwell, 1964.
"&ntiecs~ Economiti"
Oxford:
Basil
Christopher, Albert. "Growth: Implications for Small Marketers." Mcvrktienakids, Annual no. 8. Kotler, Philip. Matrhting Manageme& 3rd ed., Englewood Cliffs, New Jersey: Prentise-Hall, Inc., 1976. Madrofio,Zenaida. ;'Howto diversify your Product" Management Guide. No. 9, n.d. Small Business
Rqss, D.S. "Diversification: A guide for Small Firms, Information Service, No. 11.
"Small Firms
Turnbull, J.G. "Broadening your Manufacturing 3peratior:s,"Management Aids for Small Manufacturers. Annual No. 4.
--
TECHNBNET ASIA is a cooperative grouping (network) of 14 Participating Organizations in II Asian Pacific countries, which aims at improving the quality and efficiency of production in those countrtes small and medium scale industrial enterprises. Particular ernphasis is given to the application of knowledge concerning knowr, processes, methods, techniques, equipment, modifications and approaches to existing operations, effected by the transfer of technical information and provision of industrial extension services.
PARTICIPATING
Oi-IGANIZATIONS
OFTECHNONET
ASIA
BANGLADESH
FM
HONG KONG
blDONESlA
KOREA
Korea Scientfic and Technological Information Center (KORSTIC) Small and Medium industry Promotion Corporation (SMIPC)
MALAYSIA
Standans an3 Industrial Research institute of Maiaysia (SlhiM! Majlis Amanah Rjayat (MAFIA) lCouncil of Trust for lndigenius People)
NEPAL PHILIPPINES
Industrial Sarvices Centre (ISC) Institute for Small-Scale Industries, University of the Philippines (UP ISSI) Economic Development Foundation (EDF) Singapore Institute of Standards and !ndustrial Research (SlSiii)
SINGAPORE
Industrial Development Board (IGB) Department of Industrial Promotion, Ministry of Industry (DIP)