Professional Documents
Culture Documents
Instruction Manual: Pan, Tilt and Zoom Controller / KCT-100
Instruction Manual: Pan, Tilt and Zoom Controller / KCT-100
0d
Pan, Tilt and Zoom Controller / KCT-100
1 Introduction
Features Components 3 3
2 Installation
System Configuration Parts Description 4 4
4 Wiring
Controller Layout Wiring 7 7
5 Keyboard Functions
Select Camera Set Preset Call Preset Clear Preset Run Cruise Track Stop Cruise Track Set Auto Pan Run Auto Pan Stop Auto Pan Advanced Camera Control 8 8 8 8 8 8 8 9 9 9 9
5 Product Specifications
Introduction
Features
Controller Specification RS-485 Communication Numeric LCD Display Variable Pan and Tilt Speed Multiple Integrated Protocols (Including Pelco D and Pelco P) Programmable Baud Rate Up to 255 addressable camera ID 12v DC
Components
Parts Information
KCT-100 Manual
Power Supply
INTRODUCTION Installation
System Configuration
Configurations
Part Description
RS-485 Input for 12vDC power supply Protocol and Baud Rate Selection RS-485 Output
DIP Switches
RS-485 communication RS-485 communication is used to control the camera. Protocol and Baud rate are set using the Dip Switch located on the back on the controller. Each camera connected to the PTZ controller must have a unique address. Specification Number of wire Protocol Standard RS-485 with MAX. 32 Camera Control 2 Wire (D+, D-) Pelco-D, Pelco-P, Samsung, Neon, Hunda600, A01, B01 and Santachi
This camera supports multiple RS-485 Protocols and Baud Rates. The Baud rate is set separately from the Protocol on the CODE Dipswitch located on the back of the controller. The table below contains a list of protocols supported by the camera and the default baud rate for the protocol. Please note switch 7 and switch 8 are set OFF.
Supported Protocol Pelco D /2400 Pelco P /4800 Pelco P /9600 Samsung Neon Santachi A01 B01 Hunda600
Selection Of Protocols 1st ON OFF OFF ON ON OFF OFF ON ON 2nd ON OFF OFF OFF OFF ON OFF OFF ON 3rd OFF ON ON OFF OFF OFF OFF OFF ON 4th OFF OFF OFF OFF OFF OFF OFF OFF OFF
Default Baud Rates 5th 6th OFF OFF ON OFF OFF ON OFF ON OFF ON OFF ON ON OFF OFF ON OFF ON
Dip Switch settings for configuring the camera to use Pelco D Protocol at 2400 Baud:
Below is a table showing the proper settings of the 5th and 6th dip switch for setting preferred baud rate. Selection Of Protocols 2nd 3rd 4th Baud Rates 5th 6th OFF OFF ON OFF OFF ON ON ON
1st
Controller Layout
Wiring:
12v DC
Protocol/Baud Rate
B (-) Output
RS-485 Output
A (+) Output
5 4
Keyboard Operation
Select ID of Camera: N + [CAM] Description: N = The address of the PTZ camera you want to take control of. Function: Selects the address of the camera to be controlled.
Set Preset: N + [PRESET] Description: N = Number of preset you wish to set in the camera (1 to 128) Function: Set the specified preset in the camera selected
Call Preset: N + [CALL] Description: N = Number of preset you wish to call in the camera (1 to 128) Function: Move selected camera to specified preset.
Clear Preset: N + [CLEAR] Description: N = Number of preset (1 128) Function: Deletes specified preset stored in camera.
Run Cruise Track: N + [SHOT] Description: N = Number of the Cruise Track wish to run in the camera (1 to 6) Function: Runs specified Cruise Sequence stored in the camera.
Stop Cruise Track: (Pelco D, Pelco P): Move Joystick Description: Stops Cruise Track Function: Stops the Cruise Sequence currently running, alternatively you can move the joystick.
Set Auto Pan (Pelco D, Pelco P) Program Start and End points for Auto Pan. Auto Pan Start Point: [AUTO] + [ON] Description: Sets start point for Auto Pan Auto Pan End Point: [AUTO] + [OFF] Description: Sets end point for Auto Pan
Keyboard Functions
Run Auto Pan (Pelco D, Pelco P): [AUTO] + [SHOT] Description: Auto scans between preset Auto Pan Start Point and Auto Pan End Point
Stop Auto Pan (Pelco D, Pelco P): Move Joystick Description: Stops Auto Pan
Advanced Control of Camera Settings: You can control the Advanced Functions of some cameras directly through the keyboard. Definition of Keyboard Operation [MENU] + N + [MENU] + N + [ON] [OFF] Power Camera Reset ON/OFF ON OFF ON OFF ON OFF ON OFF Auto Auto Auto Indoor Mode ATW Mode Color Manual Manual Manual Outdoor Mode One Puch WB Black & White
Value of N 0 1 2 3 4 5 6 7 8 9 10 11
Description Camera Power Back Light Compensation Zero Illumination On Screen Display Digital Zoom Not Supported Focus Iris White Balance Mode (WB) Black and White/Color Switching
KCT-100 Specification
Model Controller Communication Baud Rates Protocol General Power Dimension Weight
KCT-100 RS-485, Max 1200 meters 2400, 4800, 9600, 19200 Bps Pelco-D, Pelco-P, Samsung, Neon, Hunda600, A01, B01 and Santachi 12v DC, 500mA 188 97 x 70(H) mm Approx. 1Kg
Memo
MEMO
10
11