Dry Gas Seals Type 28
Dry Gas Seals Type 28
Product Description
Type 28 compressor dry-running gas seals have been the industry standard since early 1970 for gas-handling turbomachinery. Utilizing John Crane's patented spiral groove pattern, these seals are non-contacting in operation.
Design Features
Shrouded mating ring prevents secondary damage in the event of a mating ring fracture. Low-level leakage can be vented to a safe area, used as fuel to drive equipment, or returned to process via a low-pressure ejector.
During dynamic operation, the mating ring/seat and primary ring/face maintain a sealing gap of approximately 0.0002 in./5 microns, thereby eliminating wear. These seals eliminate seal oil contamination and reduce maintenance costs and downtime. Single, double opposed, and tandem cartridge seals are capable of handling a wide variety of gas sealing applications in the gas collection/transmission, refining, chemical and petrochemical processing industries.
Performance Capabilities
-140C to 315C/-220F to 600F Up to 450 BARG/6,500 PSIG across single stage Up to 200 m/s / 660 fps Up to 330 mm/13 in.
Interstage Labyrinth Inlet for Separation Gas (Optional) Outlet for 2nd STAGE Leakage and Barrier Gas Barrier Gas Supply
PROCESS GAS
28AT/28XP/28EXP
MATING RING
PRIMARY RING
PROCESS GAS
28AT/28XP/28EXP
MATING RING
PROCESS GAS
BEARING CAVITY
28AT/28XP/28EXP
MATING RING
PRIMARY RING
6.0 5.0 4.0 3.0 2.0 1.0 7.125 8.125 200 9.125 0 10.125 (inches) 250 (mm) Power (HP)
10,000 rpm; 69 BARG/1,000 PSIG 10,000 rpm; 7 BARG/100 PSIG 5,000 rpm; 7 BARG/100 PSIG
*Single Seal Arrangement for applications not requiring a safety back-up seal.
*Double Seal Arrangement where hazardous gas is not permissible to leak into atmosphere.
Middle East, Africa, Asia Dubai, United Arab Emirates Tel: 971-4-3438940 Fax: 971-4-3438970
North America Morton Grove, Illinois USA 1-800-SEALING Tel: 1-847-967-2400 Fax: 1-847-967-3915
For your nearest John Crane facility, please contact one of the locations above. If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. 2002 John Crane Inc. Print 2/02 *For more information contact [email protected]
www.johncrane.com
ISO-Certified QS 9000
S-28AT/28XP/28EXP