Professional Documents
Culture Documents
CRN 32-6 A-F-G-V HQQV: Position Qty. Description Single Price
CRN 32-6 A-F-G-V HQQV: Position Qty. Description Single Price
Qty.
Description
Single Price
Price on request
Product No.: 96122389 Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation. The pump has the following characteristics: - Impellers, intermediate chambers and outer sleeve are made of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4401. - Pump head cover and base are made of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4408. - The shaft seal has assembly length according to EN 12756. - Power transmission is via cast iron split coupling. - Pipework connection is via DIN flanges/couplings. The motor is a 3-phase AC motor. Liquid: Liquid temperature range: Liquid temp: Density: Technical: Speed for pump data: Actual calculated flow: Resulting head of the pump: Shaft seal: Curve tolerance: Materials: Pump housing:
Impeller:
Stainless steel DIN W.-Nr. 1.4408 AISI 316 LN Stainless steel DIN W.-Nr. 1.4401 AISI 316
Installation: Maximum ambient temperature: 60 C Max pressure at stated temp: 16 bar / 90 C 16 bar / -20 C Flange standard: DIN Pipe connection: DN 65 Pressure stage: PN 16 / PN 25 / PN 40 Flange size for motor: FF300 Electrical data: Motor type:
Printed from Grundfos CAPS
160MB
1/6
Position
Qty.
Description
Single Price
Efficiency class: Number of poles: Rated power - P2: Power (P2) required by pump: Mains frequency: Rated voltage: Rated current: Starting current: Cos phi - power factor: Rated speed: Motor efficiency at full load: Motor efficiency at 3/4 load: Motor efficiency at 1/2 load: Enclosure class (IEC 34-5): Insulation class (IEC 85): Others: Net weight: Gross weight: Shipping volume:
1 2 11 kW 11 kW 50 Hz 3 x 380-415 D / 660-690 Y V 21,2-19,6 / 12,2-11,6 A 660-780 % 0,90-0,88 2930-2940 rpm 90,7-91,7 % 92,5 % 93,0-92,0 % 55 (Protect. water jets/dust) F
2/6
Description Product name: Product No: EAN number: Price: Technical: Speed for pump data: Actual calculated flow: Resulting head of the pump: Impellers: Shaft seal: Curve tolerance: Stages: Pump version: Model: Materials: Pump housing:
H (m)
CRN 32-6
3* 400 V, 50 Hz
80
60
40 Stainless steel DIN W.-Nr. 1.4408 AISI 316 LN Stainless steel DIN W.-Nr. 1.4401 AISI 316 G V Q = 25 m/h 20 H = 100 m Pumped liquid = Water Liquid temperature = 20 C Eta pump = 74.8 % Density = 998.2 kg/m Eta pump+motor = 68.6 % 0 0 5 10 15 20 25 30 Q(m/h) P (kW) P1 P2 10 8 6 4 2 Liquid: Liquid temperature range: Liquid temp: Density: Electrical data: Motor type: Efficiency class: Number of poles: Rated power - P2: Power (P2) required by pump: Mains frequency: Rated voltage: Rated current: Starting current: Cos phi - power factor: Rated speed: Motor efficiency at full load: Motor efficiency at 3/4 load: Motor efficiency at 1/2 load: Enclosure class (IEC 34-5): Insulation class (IEC 85): Motor protec: Motor No: Others: Net weight: Gross weight: Shipping volume: 0 -20 .. 90 C 20 C 998.2 kg/m P2 = 9.11 kW P1 = 9.93 kW
Impeller:
Material code: Code for rubber: Installation: Maximum ambient temperature: Max pressure at stated temp: Flange standard: Connect code: Pipe connection: Pressure stage: Flange size for motor:
160MB 1 2 11 kW 11 kW 50 Hz 3 x 380-415 D / 660-690 Y V 21,2-19,6 / 12,2-11,6 A 660-780 % 0,90-0,88 2930-2940 rpm 90,7-91,7 % 92,5 % 93,0-92,0 % 55 (Protect. water jets/dust) F PTC 85D17524
3/6
100
80
60
40
20
0 0 P (kW) 12
10
15
20
25
P1 P2
10
2 0
Printed from Grundfos CAPS
0.8
40
0.6
30
0.4
20
0.2
10
0 0 n (rpm) 2800
10
12
2600
2400 P1
20
2200
2000
10
5/6
172 2600
471
350
G 1/2 965
30
74 240 298
4 X 14
Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS