Eaton Rapid Link Switching and Installation System
Eaton Rapid Link Switching and Installation System
Eaton Rapid Link Switching and Installation System
net
Product Range Catalogue 2009 Rapid Link Switching and Installation System
Contents
Moeller SK2190-1063 (03/09)
Page
System overview
Motor Starters
Accessories
Technical Data
14
Dimensions
18
The Rapid Link system is designed for use in small and large plants for materials handling applications, particularly for distribution and production logistics as well as baggage handling systems in airports. Rapid Link offers all the functions required in IP65 for remotely controlling, switching and protecting spatially distributed drives via PROFIBUS-DP and AS-Interface networks. Rapid Link is quick to install and easy to commission around 50 drives per day are normally possible. The modular Rapid Link system comprises different functionally tested and prefabricated units.
System overview Interface control unit Interface to open field bus. Fast data transfer of up to 12 MBaud as PROFIBUS-DP-Slave. Head end for up to 62 slaves, can be ideally combined with the commonly available sensors and actuators of different manufacturers. IP65 plug connector for rapid connection and exchange. Disconnect control unit Isolation of the power line. Lockable with 3 padlocks. Protection against short-circuit and overload Small tripping currents enable long cable lengths. Remote status display for rapid diagnostics in the field. Motor control unit 3-phase electronic motor protection with range from 0.09 to 3 kW (400 V) reduces the number of variants required. Integrated thermistor monitoring for full motor protection. Available as DOL or reversing starter. Manual operation enables commissioning without PLC.. Two integrated sensor inputs reduce costs. Interlocked manual mode ensures safety. IP65 plug connector for rapid connection and exchange. Speed control unit Actuation of motors up to 2.2 kW at 400 V with up to 4 fixed speeds and 2 operating directions. The soft start reduces mechanical wear and offers the maximum torque. Speeds, acceleration and deceleration times can be set as required and are infinitely variable. Manual operation and the speed potentiometer enable commissioning to be carried out without a PLC. Sensorless vector control with high starting torque (RA-SPV). Integrated brake chopper with braking resistance for dynamic braking (RA-SPV). Thermistor protection, overload and earth fault monitoring ensure safety. IP65 plug connector for rapid connection and exchange. Notes The Rapid Link system must not be commissioned without referring to the manual AWB2190-1430. This manual is available online at ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/h1430gb.pdf
Product information Manuals Rapid Link Switching and Installation System a AWB2190-1430GB DF5 Frequency Inverters a AWB8230-1412GB DF5 Frequency Inverter Training Guide a AWB8230-1447GB DV5 frequency inverters a AWB8230-1414GB Vector Frequency Inverter Training Guide DV5 a AWB8230-1448B AS-Interface/PROFIBUS Gateways a AWB2700-1409GB
System overview
Moeller SK2190-1063 (03/09) http://catalog.moeller.net
u e
24 V H
a b c
v d
3 h 400 V PE 50/60 Hz
30 V H SELV
h =
1 0
OFF
400 V
M 3h
f e f g q h s f n t
400 V
M 3h
s f n
i j i
k o
p p m m
a Disconnect control unit with lockable rotary handle; circuit-breaker to protect from overload and short-circuits: a Page 8 b Interface control unit a interface to the open field bus: a Page 8 c Motor control unit a 3-phase electronic motor protection with additional use as DOL starter or reversing starter: a Page 5 d Speed control unit a Actuation of three-phase asynchronous motors with four fixed speeds, bidirectional operation and soft starting: a Page 7 e AS-Interface-ribbon cable f Link for M12 connector cables: a Page 13 g Ribbon cable for 400 V ~ and 24 V or AS-Interface: a Page 11 h Incoming supply for ribbon cable: a Page 11 i Flexible busbar junction: a Page 11
j Round cable for 400 V ~ and 24 V k Plug-in link for round cable (7 pole): a Page 12 l Round cable for 400 V m Plug-in link for round cable (5 pole): a Page 12 n Power adapter cable to ribbon cable: a Page 10 o Power adapter cable to round cable (7 pole): a Page 10 p Power adapter cable to round cable (5 pole): a Page 12 q Ribbon cable end-piece: a Page 11 r Motor cable (shielded): a Page 10 s M12 Extension cable: a Page 13 t Motor cable (unshielded): a Page 9 u M12 double branch: a Page 13 v External auxiliary voltage 24 V DC
Motor Starters
http://catalog.moeller.net Moeller SK2190-1063 (03/09) External I/Os via M12 socket Number Motor control unit Motor starters with electronic motor protection from 0.09 to 3 kW/400 V AC Integrated PTC thermistor monitoring (Thermoclick) with safe isolation. 2 external inputs up to 150 mA via M12 socket with quick stop and interlocked manual mode. All terminals pluggable. Connection via adapter cable to round cable or flexible busbar junction. 24 V DC auxiliary circuit only required for devices with external 24 V output. Optionally one external 24 V output via M12 socket. Actuation of brake motors. AS-Interface Slave Spec. 2.1 for 62 stations. Diagnostics and reset on device and via AS-Interface. Operation without auxiliary circuit DOL starter with keyswitch 2/400 AUTO - OFF/RESET - MANUAL DOL starter with keyswitch 2/230 AUTO - OFF/RESET - MANUAL
M
1 0 1 2 3 4 5 OFF
5
New
Std. pack
1 off
2/-
400
RA-MOL-D/C3A 116856
1 0
OFF
1 0
Reversing starter with keyswitch AUTO - OFF/RESET - MANUAL and selector switch REV - OFF - FWD Reversing starter with keyswitch AUTO - OFF/RESET - MANUAL and selector switch REV - OFF - FWD
2/-
400
2/-
230
OFF
2/-
400
RA-MOL-W/C3A 116857
1 0
OFF
Notes
Equipment supplied: Motor feeder socket to DESINA Standard With AS-Interface/M12 plug on the unit With power plug on the unit
6
New
Motor Starters
Moeller SK2190-1063 (03/09) http://catalog.moeller.net Price see price list Std. pack
External I/Os via M12 socket Number Operation without 24 V DC auxiliary circuit DOL starter with keyswitch AUTO - OFF/RESET - MANUAL
M
2/1
RA-MO-DA/C3A 113882
1 off
1 0
OFF
Reversing starter with keyswitch AUTO - OFF/RESET - MANUAL and selector switch REV - OFF - FWD
M
2/1
400
RA-MO-WA/C3A 113884
1 0
OFF
2/-
400
RA-MO24V-D/C3A 113885
1 0
OFF
Reversing starter with keyswitch AUTO - OFF/RESET - MANUAL and selector switch REV - OFF - FWD
M
2/-
400
RA-MO24V-W/C3A 113886
1 0
OFF
Notes
Equipment supplied: Motor feeder socket to DESINA Standard With AS-Interface/M12 plug on the unit With power plug on the unit
7
Rapid Link switching and installation system
UL/CSA
Std. pack
V AC
HP at 480 V AC
2 external inputs up to 70 mA via M12 sockets Diagnostics and reset on the device
1 off
1 off
1 1 1 1 3 3
1 off
Equipment supplied: Motor feeder socket to DESINA Standard With AS-Interface/M 12 plug on the unit With power plug on the unit
8
Rapid Link switching and installation system
RA-DI2-PKZ2 254676
1 off
a
400 V 24 V H V-M25
b c
f
Accessories 1 Cable gland 2 AS-Interface flat cable 3 M12 branch 4 Flexible busbar feeder or distributor module 5 Flexible busbar 6 Round cable junction Notes Page a9 a 13 a 13 a 11 a 11 a 12
Supplied: With AS-Interface supply cable, approx. 0.5 m incl. M12 plug M20/M25 knockout plate for glands 4 pin-end connectors for connecting 4 mm2 and 6 mm2 cross-sections to NHI11 standard auxiliary contact RA-IN2.1-DP 254672 1 off
Interface control unit The interface control unit is supplied via an external 30 V DC AS-Interface power supply unit. The integrated data decoupling allows several interface control units to be supplied with only one power supply unit. The power supply unit and the PROFIBUS-DP cabling must be ordered separately (e.g. from German suppliers Turck). Interface to the open fieldbus incl. power extender Up to 62 slaves per AS-Interface line, up to 2.8 A Integrated data decoupling with power extender
30 V H
=
SELV
b d
d e c d e f
Accessories 1 AS-Interface flat cable 2 M12 branch 3 M12 plug connector, plug 4 M12 plug connector, coupling 5 M12 T connector 6 M12 terminating resistor Notes Page a 13 a 13 a9 a9 a9 a9
Supplied: With AS-Interface supply cable, approx. 0.5 m incl. M12 plug M12 socket for PROFIBUS-DP, B-coded Cable socket to DIN 43650-A/ISO 4400 for 30 V DC supply, 2 poles + earth, for 2.5 mm2 round cables, external diameter 6 9 mm.
Accessories
http://catalog.moeller.net Moeller SK2190-1063 (03/09) For use with Accessories RA-IN accessories Terminating resistor M12 M12 plug connector for assembly by user M12 plug connector for assembly by user M12 T connector For PROFIBUS-DP, B-coded For PROFIBUS-DP, B-coded, straight coupling For PROFIBUS-DP, B-coded, straight plug For PROFIBUS-DP, B-coded RA-IN-XT-DP RA-IN-XT-DP RA-IN-XTR-DP 254674 RA-IN-XF-DP 263852 RA-IN-XM-DP 263853 RA-IN-XT-DP 263854 1 off 1 off Part no. Article no. Price see price list Std. pack
1 off
1 off
RA-DI accessories Cable gland1) For cables with outer diameters of 6 13 mm H05VV-F 4 x 2,5/3 x 4 mm2 NYM 5 x 1,5/5 x 2,5 mm2 V-M20 206910 20 off
Cable gland1)
V-M25 206911
20 off
RA-MO accessories Power adapter cable to flexible busbar 1.5 m, halogen free, 5 x 1.5 mmB RA-MO.../C3A RA-SP.../C3A RA-C1-PLF RA-C3/C1-1,5HF 290210 1 off
RA-C3/C2-1,5HF 290211
1 off
Power plug2)
For assembly by user, crimp contacts 5 x 1.5 mmB, for 6 12 mm external cable diameter 2 m, halogen free, 8 x 1.5 mmB plastic plug 3 m, halogen free, 8 x 1.5 mmB plastic plug 5 m, halogen free, 8 x 1.5 mmB plastic plug 10 m, halogen free, 8 x 1.5 mmB plastic plug For assembly by user, crimp contacts 8 x 1.5 mmB, for 9 13 mm external cable diameter For motor cables and motor plugs, disconnection device to EN 60204-1
RA-MO.../C3A RA-SP.../C3A
RA-C3-PLF 290423
1 off
Motor cable Motor cable Motor cable Motor cable Motor feeder plug2)
SET-M3/2-HF 230914 SET-M3/3HF 272198 SET-M3/5-HF 265558 SET-M3/10-HF 272257 SET-M3-A 231640 SET-M-LOCK 272085
Lock shackle3)
RA-MO RA-SP
1 off
Notes
1) Metric
to EN 50262 order quantity: 10 off Tools required: Crimping tool for HAN E contacts from Harting 3) For padlocks with hasp thickness up to 8 mm
2) Minimum
10
Accessories
Moeller SK2190-1063 (03/09) http://catalog.moeller.net Price see price list Std. pack
For use with Accessories RA-SP accessories Power adapter cable to flexible busbar 1.5 m, halogen free, 5 x 1.5 mmB RA-MO.../C3A RA-SP.../C3A RA-C1-PLF
RA-C3/C1-1,5HF 290210
1 off
RA-C3/C2-1,5HF 290211
Power plug1)
For assembly by user, crimp contacts 5 x 1.5 mmB, for 6 12 mm external cable diameter 2 m, halogen free, 4 x 1.5 mmB + 2 x (2 x 0.75) mmB, metal plug 3 m, halogen free, 4 x 1.5 mmB + 2 x (2 x 0.75) mmB, metal plug 5 m, halogen free, 4 x 1.5 mmB + 2 x (2 x 0.75) mmB, metal plug 10 m, halogen free, 4 x 1.5 mmB + 2 x (2 x 0.75) mmB, metal plug For assembly by user, crimp contacts 4 x 1.5 mmB + 4 x (2 x 0.75) mmB, for 9 to 13 mm external cable diameter For motor cables and motor plugs, disconnection device to EN 60204-1 With memory
RA-MO.../C3A RA-SP.../C3A
RA-C3-PLF 290423
Motor cable
RA-SP
SET-M4/2-HF 254485 SET-M4/3HF 272199 SET-M4/5-HF 265622 SET-M4/10-HF 276251 SET-M4-A 254686
Motor cable
RA-SP
Motor cable
RA-SP
Motor cable
RA-SP
RA-SP
Lock shackle2)
ALARM
PRG
POWER RUN
RMT MNT
READ PRG
COPY ENTER
LCD keypad with non-volatile memory. Flush mounting in DF6 and DV6 frequency inverters possible. For detached mounting, a connection cable (DEX-CBL-ICS, DNW-PC) is required.
FWD
REV
Connection cable (1.0 m) with RJ-45 plugs Connection cable (3.0 m) with RJ-45 plugs Interface converter
Notes
1) Minimum
order quantity: 10 off Tools required: Crimping tool for HAN E contacts from Harting 2) For padlocks with hasp thickness up to 8 mm
Accessories
http://catalog.moeller.net Moeller SK2190-1063 (03/09) For use with Part no. Article no. Price Std. pack see price list Notes
11
Accessories Remote power supply via flexible busbar RA-C1 Flexible busbar Halogen free, 7 x 4 mm2 RA-.../C1
RA-C1-7X4HF 230860
Flexible busbar Insulation piercing junction for 400 terminals, terminal V AC and 24 V socket with lock DC mechanism Protective cover for flexible busbar junction Plug insert with For 400 and 24 V hood
RA-C1-7X4HF RA-.../C1
RA-C1-PLF 290188
5 off
RA-C1-PLF RA-C1-PLF
10 off 5 off
Order gland V-M25 separately. Connection of 1.5/2.5 mm2 round cables. Order gland V-M25 and V-M20 separately. Connection of round cables 4 mm2.
Junction for 400 V AC and 24 V DC, insulation piercing terminals, 2 x V-M25 and 2 x V-M20,2 knockout plates, connection module with springloaded terminals Feeder plug with 400 V AC and AScables Interface, cable length 400 V + AS1.5 m each, M12 plug Interface and RA-C3-PLF
RA-C1-7X4HF RA-.../C1
RA-C1-AM-7 290214
5 off
RA-MO-D RA-MO-W RA-MOL... RA-SP.../C3A RA-C1-PLF1 RA-C1-PLM/ C3-1M5 RA-C1-7X4HF RA-MO-D RA-MO-W RA-MOL RA-SP/C3A RA-C1-7X4HF
RA-C1-PLM/C3-1M5 112624
New
1 off
Flexible busbar Termination with junction for 400 piercing screws, terminal V + AS-Interface socket with lock mechanism Connection 400 V AC and module with AS-Interface, cable cables 400 V + length 1.5 m each, M12 AS-Interface plug and RA-C3-PLF, termination with piercing screws, knockouts Connection clip AS-Interface incomer/ for ASI flat cable outgoer for connection modules, termination via insulation piercing technology Flexible busbar power supply and distributor module
RA-C1-PLF1 116904
New
1 off
RA-C1-AM/C3-1M5 112625
New
1 off
Can be used when AS-Interface implemented in flat cable. Can be used when AS-Interface implemented in flat cable.
RA-C1-AZPG 112978
New
1 off
With integrated ASInterface overvoltage protection; protection against interference on switch operations or short-circuit. Order gland V-M25/ V-M20 and bushing RA-C1-DF separately. Connection of round cables 4 mm2.
With 3 flexible busbar RA-C1-7X4HF inputs and 2 round cable RA-.../C1 inputs
RA-C1-VM-7 264244
2 off
Bushing for flexible busbar Flexible busbar junction for 24 V DC Flexible busbar fixing clips Flexible busbar end-piece
In distributor module or control panel Termination with piercing screws, connection sockets with screw contacts
RA-C1-VM-7
10 off
RA-C1-7X4HF RA-.../C1
5 off
100 off
10 off
Tool
RA-C1-7X4HF RA-.../C1
1 off
Tool
For removing cable RA-C1-7X4HF sheath at the ends of the RA-.../C1 7 x 4 mmB flexible busbar
1 off
12
Accessories
Moeller SK2190-1063 (03/09) http://catalog.moeller.net Std. pack Notes
For use with Accessories Remote power supply via RA-C2 round connector Round cable For 7 x 2.5/4 mmB cable, junction 400 V AC and 24 V DC, insulation piercing terminals, cable fixing with metal screws, prewired socket inserts
RA-C2-S1-4 257830
1 off
Suitable for cable external diameters 10 13/13 16 mm. Supplied: 2 pairs of seals for these cable diameters, 1 lock mechanism. Tools required: Crimping tool for HAN E contacts from Messrs. Harting Minimum order quantity: 10 off One set with 10 filler plugs.
RA-C2-S1-4
RA-C2-PLM 272089
1 off
End piece for the last round cable junction in the power line Remote power supply via RA-C4 round cable Power box in IP 65
RA-C2-S1-4
RA-C2-SBL 265357
10 off
Contact unit for uncut power cables from 2.5 to 6 mmB, T-junction via push-in terminal 1.5 to 6 mmB and/ or plug terminal from 0.5 to 4 mmB, enclosure IP65, supplied without seals
RA-C4-PB65 116905
New
1 off
Enclosure continuous seals must be ordered separately. Tools required: Stripping tool AM16 from Weidmller or similar.
Seal 11 - 13 mm
Enclosure bushing seal, slotted, for 11 - 13 mm EPDM round cable, silicon free and halogen free, IP65 Enclosure bushing seal, slotted, for 13 - 15 mm EPDM round cable, silicon free and halogen free, IP65 Enclosure bushing seal, slotted, for 15 - 17 mm EPDM round cable, silicon free and halogen free, IP65 Enclosure seal, closed, EPDM, silicon free and halogen free, IP65 Plug with 0.5 - 4 mmB pushin terminal, printed with 1; N/4; 2; h; 3.
RA-C4-PB65
RA-C4-D13 116907
New
10 off
Seal 13 - 15 mm
RA-C4-PB65
RA-C4-D15 116908
New
10 off
Seal 15 - 17 mm
RA-C4-PB65
RA-C4-D17 116909
New
10 off
RA-C4-PB65
New
10 off
RA-C4-PB65
New
10 off
Power adapter cable with plug for power box Power adapter cable, for user assembly
Premanufactured 5 x 1.5 mmB cable, halogen-free, with RA-C4-PPB and power plug with IP65 seal, length 1.5 m Premanufactured 5 x 1.5 mmB cable, halogen-free, with ferrules and power plug with IP65 seal, length 1.5 m
RA-C4-PPB/C3-1M5 116962
New
1 off
RA-C4-X/C3-1M5 116961
New
1 off
Accessories
http://catalog.moeller.net Moeller SK2190-1063 (03/09) For use with Accessories AS interface Addressing unit RA-DI RA-MO RA-SP AS2-74... PG2-105-AD2 222172 1 off Part no. Article no. Price see price list Std. pack Notes
13
M12 branch
IDC termination
ZB2-100-AZ1 082667
1 off
RA-XAZ2-1M 292253
1 off
3-pole, 1 m
1 off
1 off
For extending the AS-Interface M12 cables, if required. Pins 1, 3, 4 are assigned. For connecting up to 4 sensors
1 2 3 4 1 2 3 4 1 2 3 4
Other accessories Spare key For AUTO - OFF/RESET - HAND key-switches RA-MO RA-SP M22-ES-MS1 216416 5 off
14
Rapid Link switching and installation system
Technical Data
Moeller SK2190-1063 (03/09) Flat cable RA-C1-7X4HF General Standards IEC 60332-1 DIN VDE 0295 Class 6 DIN VDE 0281 Part 404 IP65 -15 50 -570 As required Self-extinguishing to IEC 60332-1 To VDE 0473, Part 811-2-1 Material according to DIN VDE 0282, EVA mixture EM4, black 18 440 L x 34.8 x 6.0 Power supply for flexible busbar RA-C1-AM-7 DIN/EN 60664-1 DIN/EN 60529 DIN/EN 60999 DIN VDE 0470 Part 1 IP65 -15 40 -550 As required http://catalog.moeller.net Power supply for flexible busbar RA-C1-VM-7 IEC/EN 60047-7-1 DIN VDE 0470 Part 1 IP65 -15 50 -550 As required http://catalog.moeller.net Flexible busbar junction RA-C1-PLF IEC/EN 68000-2-27 IEC/EN 60998-3 DIN VDE 0660 Part 1535 IP65 -15 50 -550 As required Moeller SK2190-1063 (03/09) Round cable junction RA-C2-S...-4 EN 61684 DIN VDE 0110 DESINA IP65 -15 50 -550 As required IP65 -40 55 1040 As required Round cable junction RA-C4-PB65
Technical Data
15
Rapid Link switching and installation system
Degree of protection (IEC/EN 60529) Ambient temperature Ambient temperature, Mounting Mounting position Flame retardance, fire propagation Resistance to oils and acids Sheathing Minimum bending radius Cable weight Outer dimensions L x W x H Overvoltage category/pollution degree Termination External diameter of cable
C C
mm kg/km mm
mm
160 x 60.2 x 59.5 III/3 Springloaded terminals 1.5 to 4 mmB V-M25: 9 17 V-M20: 6 13
181 x 104 x 67 III/3 Insulation piercing terminals 11 13 13 15 15 17 690 25 (4 mm2) 16 RA-DI PKZ2/ZM25-8 FAZ-3-B20 FAZ-3-C20
Main circuit Rated operational voltage Rated operational current Rated current per junction Line protection
Ue Ie
V AC A A Type
500 25
500 25
500 25
500
500 20/25 (2.5 mm2/4 mm2) 16 RA-DI PKZ2/ZM25-8 FAZ-3-B20 FAZ-3-C20 24 20/25 (2.5 mm2/4 mm2)
Ue Ie
V DC A
SET-M3... Motor cable and motor feeder plug General Standards Degree of protection (IEC/EN 60529) Operation Rated operational voltage Ue Connection cable Terminal capacities External diameter of cable Minimum bending radius Conductor material Material of outer casing Colour Resistance to oils and acids Flame retardance, fire propagation Plug connector Conductor cross-section of contact pins Material Contact inserts Contact material Housing Lock mechanism EN 61 684 DIN VDE 0110 IP65 -30 70 300/500 8 x 1.5 9 13 6 x external diameter of cable Cu flexible to VDE 0295 Class 5 Halogen free Silver grey (RAL 7001) VDE 0472 Part 803 B EN 50265-2-1 8 x 1.5
SET-M4... Motor cable and motor feeder plug EN 61 684 DIN VDE 0110 IP65 -30 70 500 (Signal wires: 300) 4 x 1.5 + 2 x (2 x 0.75) shielded 9 13 10 x external diameter of cable Cu highly flexible to VDE 0295 Class 6 Halogen free Orange (RAL 2003) VDE 0472 Part 803 A/B IEC 60332-2 4 x 1.5 + 4 x 0.75
Addressing unit PG2-105-AD2 General Interface Power supply Charger Service life Protection type Operating temperature Ambient temperature, storage Weight
C V AC mm2 mm mm
C C kg
AS-Interface, short-circuit and overload protected Accumulator 115/230 V AC plug-in charger 8 h (read/write operations with a fully charged accumulator) IP 20 0 / 50 -2055 0,55
mm2
16
Rapid Link switching and installation system
Technical Data
Moeller SK2190-1063 (03/09) RA-IN General Standards RA-DI http://catalog.moeller.net http://catalog.moeller.net RA-MO Moeller SK2190-1063 (03/09) RA-SP..075.. RA-SP..1K1..
Technical Data
17
Rapid Link switching and installation system
RA-SP..2K2..
EN 50081 EN 50082
IEC/EN 60947
Degree of protection (IEC/EN 60529) Operation Ambient temperature, Storage Vibration resistance (IEC/EN 60068-2-6, const. amplitude 0.15 mm/const. acceleration 2 g) Mechanical shock resistance (IEC/EN 60068-2-27) Mounting position Weight Indication elements Main circuit Supply Rated operational voltage Mains current Rated operational current Rated uninterrupted current Rated impulse withstand voltage Overvoltage category/pollution degree Frequency range Short-circuit protective device, type 1 coordination
C C Hz
IP65 -0 - 40 -25 - 70
IP65 -0 - 40 -25 - 70
EN 50081-1 EN 50082-2 IEC/EN 55011/A1 Class A IEC/EN 55022 Class A IEC/EN 60947 DIN VDE 0660 Part 303 IP65 -25 - 40 -25 - 70
EN 50178 IEC/EN 55011/A1 Class A IEC/EN 55022 Class A IEC/EN 61800-3 incl. A11
EN 50178 IEC/EN 55011/A1 Class A IEC/EN 55022 Class A IEC/EN 61800-3 incl. A11
EN 50178 IEC/EN 55011/A1 Class A IEC/EN 55022 Class A IEC/EN 61800-3 incl. A11
kg
Vertical 2 LED
Ue I Ie Iu Uimp
V AC A A A kV Hz Type
400 20 20 20 6 III/3 50 - 60
Rated conditional short-circuit current AC Discharge current to PE Heat dissipation Motor circuit Assigned motor rating Setting range, motor protection Tripping class Output voltage Frequency range, motor output Control circuit 24 V DC Rated voltage Tolerance Typical current consumption at 24 V DC AS-Interface Max. total power consumption from AS-Interface (30 V DC power supply unit) Max. current supply in AS-Interface AS-Interface Specification Slave addresses IO code (Hex) ID code (Hex) ID1-Code (Hex) ID2-Code (Hex) Inputs Data input 0 Data input 1 Data input 2 Data input 3 Outputs Data output 0 Data output 1 Data output 2 Data output 3 Mains connection cable Terminal capacities Material of outer casing
kArms mA W kW A A V AC Hz
10
400 6,6 6.6 4 III/2 50 - 60 RA-DI PKZ2/ZM25-8 FAZ-3-B20, FAZ-3-C20 10 0.09 3 0.3 6.6 10 Ue 50 60
400 3,3 2.5 III (to DIN VDE 0110) 50 - 60 RA-DI PKZ2/ZM25-8 FAZ-3-B20, FAZ-3-C20 10 < 3.5 mA (to EN 50178) 44 0.37 0.75 (0.5 1.2) x Ie electronic 0 Ue 0.5 360
400 3,6 2.8 III (to DIN VDE 0110) 50 - 60 RA-DI PKZ2/ZM25-8 FAZ-3-B20, FAZ-3-C20 10 < 3.5 mA (to EN 50178) 65 0.75 1.1 (0.5 1.2) x Ie electronic 0 Ue 0.5 360
400 6,4 5 III (to DIN VDE 0110) 50 - 60 RA-DI PKZ2/ZM25-8 FAZ-3-B20, FAZ-3-C20 10 < 3.5 mA (to EN 50178) 92 1.1 2.2 (0.5 1.2) x Ie electronic 0 Ue 0.5 360
UL
Ue
V DC % mA mA mA Number
24 1520 200 50220 2.1 62 7 A Address ...A = 0, address ...B = F D Automatic Group fault External input (I3) External input (I4) Main contactor Reversing contactor LED O3 and external output RA-MO4A(O3) 1.5 Halogen free
24 (internal) 25220 2.1 31 7 E 0 0 Automatic Group fault Enable rotation FWD (CW) Enable rotation REV (CCW) Setpoints Setpoints 1.5 Halogen free
24 (internal) 25220 2.1 31 7 E 0 0 Automatic Group fault Enable rotation FWD (CW) Enable rotation REV (CCW) Setpoints Setpoints 1.5 Halogen free
24 (internal) 25220 2.1 31 7 E 0 0 Automatic Group fault Enable rotation FWD (CW) Enable rotation REV (CCW) Setpoints Setpoints 1.5 Halogen free
18
Rapid Link switching and installation system
1.5
152
29 200 210
19.5
222
5.5 120
45
210 242
222
292.5
260
123
55
120 221.5
280
164
76
121 224.5
70 5
1.5
1.5
152
200
210
152
200
210
222
222
5.5 120
5.5 120
50.5
109.5 160
62
19
Rapid Link switching and installation system
130 158
78.5 112.5
119
5.5
25.5
27
M4
109
142.5
47.5
60.2
47.5
36.7
37.2
4.5
5 160
59.5
107 115
55
57.5
55
6 54.5
M4 132
48.2
RA-C4-PB65
70
83
6.5
162.5 175
3.3 78
165 181 6 67
104
89
4.5
For service issues please contact your Moeller representative or the Moeller Field Service. Hotline (24/7/365) +49 (0) 180 5 223822 (de, en) Phone (Mo Fr, 8 a.m. 4 p.m.) +49 (0) 228 6 02-3640 Fax +49 (0) 228 6 02-1789 Mail: [email protected] Internet: www.moeller.net/fieldservice
Eatons electrical business is a global leader in electrical control, power distribution, uninterruptible power supply and industrial automation products and services. Eatons global electrical brands, including Cutler-Hammer, MGE Office Protection Systems, Powerware, Holec, MEM, Santak and Moeller, provide customer-driven PowerChain Management solutions to serve the power system needs of the industrial, institutional, government, utility, commercial, residential, IT, mission critical and OEM markets worldwide. www.eaton.com