Professional Documents
Culture Documents
FM 3-05.230 Special Forces Tactical Facilities PDF
FM 3-05.230 Special Forces Tactical Facilities PDF
230
February 2009
DISTRIBUTION RESTRICTION: Distribution authorized to U.S. Government agencies and their contractors only to protect technical or operational information from automatic dissemination under the International Exchange Program or by other means. This determination was made on 14 November 2008. Other requests for this document must be referred to Commander, United States Army John F. Kennedy Special Warfare Center and School, ATTN: AOJK-DTD-SF, Fort Bragg, NC 28310-9610, or higher authority. DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document. FOREIGN DISCLOSURE RESTRICTION (FD 6): This publication has been reviewed by the publication developers in coordination with the United States Army John F. Kennedy Special Warfare Center and School foreign disclosure authority. This publication is releasable to students from foreign countries on a case-by-case basis only.
This publication is available at Army Knowledge Online (www.us.army.mil) and General Dennis J. Reimer Training and Doctrine Digital Library at (www.train.army.mil).
*FM 3-05.230
Field Manual No. 3-05.230 Headquarters Department of the Army Washington, DC, 8 February 2009
PREFACE .................................................................................................................... v Chapter 1 THE SPECIAL FORCES TACTICAL FACILITY ...................................................... 1-1 Overview .................................................................................................................... 1-1 Three Phases of Special Forces Tactical Facility Development................................ 1-2 Tactical Facility Essential Support Systems .............................................................. 1-2 Tactical Facility Critical Nodes Matrix ........................................................................ 1-3 Rural Tactical Facility ................................................................................................. 1-4 Urban Tactical Facility.............................................................................................. 1-12 Summary ................................................................................................................. 1-13 TACTICAL FACILITY PLANNING AND DESIGN.................................................... 2-1 Section IPlanning ................................................................................................. 2-1 Statement of Requirements ....................................................................................... 2-1 Area Study ................................................................................................................. 2-1 Site Survey ................................................................................................................ 2-1 Area Assessment ...................................................................................................... 2-2 Special Operations Debrief and Retrieval System .................................................... 2-2 Section IIDesign ................................................................................................... 2-3 Inner Perimeter .......................................................................................................... 2-3 Inner Barrier and Outer Barrier................................................................................ 2-12 Outer Perimeter ....................................................................................................... 2-14 Administration Area ................................................................................................. 2-19
Distribution Restriction: Distribution authorized to U.S. Government agencies and their contractors only to protect technical or operational information from automatic dissemination under the International Exchange Program or by other means. This determination was made on 14 November 2008. Other requests for this document must be referred to Commander, United States Army John F. Kennedy Special Warfare Center and School, ATTN: AOJK-DTD-SF, Fort Bragg, NC 28310-9610, or higher authority. Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Foreign Disclosure Restriction (FD 6): This publication has been reviewed by the publication developers in coordination with the United States Army John F. Kennedy Special Warfare Center and School foreign disclosure authority. This publication is releasable to students from foreign countries on a case-by-case basis only. *This publication supersedes FM 3-05.230, 30 July 2003. i
Chapter 2
Contents
Access Road ........................................................................................................... 2-24 Surrounding Area .................................................................................................... 2-24 Chapter 3 TACTICAL FACILITY CONSTRUCTION................................................................. 3-1 Construction Principles ............................................................................................. 3-1 General Structural Components ............................................................................... 3-1 Concrete.................................................................................................................... 3-8 Rock .......................................................................................................................... 3-8 Brick and Masonry .................................................................................................... 3-9 Wood ......................................................................................................................... 3-9 Sandbags .................................................................................................................. 3-9 Pallets ..................................................................................................................... 3-10 Ammunition Containers........................................................................................... 3-10 Steel Drums ............................................................................................................ 3-10 Large Shipping Containers ..................................................................................... 3-11 Metal Pipe ............................................................................................................... 3-11 Cinder Blocks .......................................................................................................... 3-11 Fencing ................................................................................................................... 3-12 Emergency Signal Project....................................................................................... 3-12 TACTICAL FACILITY OPERATIONS AND DEFENSE ........................................... 4-1 Areas of Responsibility ............................................................................................. 4-1 Operational Environments ........................................................................................ 4-1 Threat Level .............................................................................................................. 4-2 Joint Fires.................................................................................................................. 4-3 Indirect Fire ............................................................................................................... 4-4 Close Combat Attack ................................................................................................ 4-4 Close Air Support ...................................................................................................... 4-5 Radars....................................................................................................................... 4-5 Unmanned Aircraft Systems ..................................................................................... 4-9 Multinational Fire Support ......................................................................................... 4-9 Fire Support Planning ............................................................................................. 4-10 TACTICAL FACILITY SUSTAINMENT .................................................................... 5-1 Logistics Overview .................................................................................................... 5-1 Developed Theater Logistics .................................................................................... 5-1 Undeveloped Theater Logistics ................................................................................ 5-5 Special Forces Operational Detachment Support and Sustainment ........................ 5-7 TACTICAL FACILITY FUNDING ............................................................................. 6-1 Funding Principles .................................................................................................... 6-1 Contracting Process.................................................................................................. 6-2 TACTICAL FACILITY RELIEF IN PLACE ............................................................... 7-1 Procedures ................................................................................................................ 7-1 Considerations .......................................................................................................... 7-1 Types of Relief in Place or Closeout ......................................................................... 7-3 Relief in Place Environmental Factors ...................................................................... 7-4 Closeout Assistance ................................................................................................. 7-6 Final U.S. Closeout ................................................................................................... 7-7
Chapter 4
Chapter 5
Chapter 6
Chapter 7
ii
FM 3-05.230
8 February 2009
Contents
AREA STUDY .......................................................................................................... A-1 SITE SURVEY .......................................................................................................... B-1 AREA ASSESSMENT.............................................................................................. C-1 GLOSSARY ................................................................................................ Glossary-1 REFERENCES ........................................................................................ References-1 INDEX ................................................................................................................ Index-1
Figures
Figure 1-1. Special Forces tactical facility critical nodes matrix ............................................. 1-3 Figure 1-2. Rural Special Forces tactical facility critical nodes .............................................. 1-5 Figure 1-3. Initial phase rural tactical facility (Afghanistan) .................................................... 1-6 Figure 1-4. Initial phase rural tactical facility rudimentary housing (Africa) ............................ 1-6 Figure 1-5. Initial phase rural tactical facility shower facility................................................... 1-7 Figure 1-6. Initial phase rural tactical facility latrine ............................................................... 1-7 Figure 1-7. Temporary phase rural tactical facility wood-framed structures .......................... 1-8 Figure 1-8. Temporary phase latrines..................................................................................... 1-9 Figure 1-9. Power transformers routing electricity to structures ............................................ 1-9 Figure 1-10. Redundant permanent phase generators ........................................................ 1-10 Figure 1-11. Filling stackable barrier systems ...................................................................... 1-11 Figure 1-12. Tactical facility improved protection measuresolid, defensible mud wall ..... 1-11 Figure 1-13. Urban Special Forces tactical facility critical nodes ......................................... 1-12 Figure 2-1. Rural Special Forces tactical facility overview (example 1) ................................. 2-4 Figure 2-2. Rural Special Forces tactical facility overview (example 2) ................................. 2-4 Figure 2-3. Inner protective berm ........................................................................................... 2-5 Figure 2-4. Elevated inner berm positions ............................................................................. 2-5 Figure 2-5. Rocket predetonation sequence .......................................................................... 2-6 Figure 2-6. DA Form 5517-R (Standard Range Card) ........................................................... 2-8 Figure 2-7. Personnel bunker offering indirect-fire protection ................................................ 2-9 Figure 2-8. Mortar position ................................................................................................... 2-11 Figure 2-9. Machine gun bunker .......................................................................................... 2-15 Figure 2-10. Sandbags stacked chest-high around tactical facility structures ..................... 2-16 Figure 2-11. Outer perimeter corner observation tower ....................................................... 2-17 Figure 2-12. Fuel point ......................................................................................................... 2-19 Figure 2-13. Helicopters landing at a tactical facility helicopter landing zone...................... 2-20 Figure 2-14. Host-nation dispensary .................................................................................... 2-20 Figure 2-15. Constructing a rebar reinforced concrete helicopter pad ................................ 2-21 Figure 2-16. Vetted host-nation employees wearing colored vests ..................................... 2-22 Figure 2-17. Main gate entrance and confinement zone ..................................................... 2-23
8 February 2009
FM 3-05.230
iii
Contents
Figure 2-18. Access road ..................................................................................................... 2-24 Figure 3-1. Mortar pit with mil markings ................................................................................. 3-3 Figure 3-2. Mortar pit without mil markings ............................................................................ 3-3 Figure 3-3. Observation tower ............................................................................................... 3-4 Figure 3-4. Indigenous employees mixing cement ................................................................ 3-5 Figure 3-5. Brick slab roofing ................................................................................................. 3-9 Figure 4-1. Close combat attack checklist ............................................................................. 4-5 Figure 4-2. Unattended transient acoustic measurement and signature intelligence system ............................................................................................. 4-6 Figure 4-3. Lightweight countermortar radar ......................................................................... 4-7 Figure 4-4. AN/TPQ-36 radar................................................................................................. 4-7 Figure 4-5. AN/TPQ-37 radar................................................................................................. 4-8 Figure 4-6. MQ-1 Predator unmanned aircraft system .......................................................... 4-9 Figure 4-7. Standard 9-line report format ............................................................................ 4-11 Figure 4-8. Special Forces immediate close air support request channels ......................... 4-12 Figure 4-9. Fixed-wing airspace control measures .............................................................. 4-17 Figure 4-10. Formal airspace coordination area .................................................................. 4-18 Figure 5-1. Airdrop resupply .................................................................................................. 5-3 Figure 5-2. Vehicle recovery .................................................................................................. 5-4 Figure 5-3. Statement of requirements format ....................................................................... 5-9 Figure 6-1. Fiscal questionnaire ............................................................................................ 6-6 Figure 6-2. Resourcing funds and contracting checklist ...................................................... 6-14 Figure A-1. Special Forces area study .................................................................................. A-1 Figure B-1. Site survey checklist............................................................................................ B-1 Figure C-1. Initial area assessment ....................................................................................... C-1 Figure C-2. Principal area assessment.................................................................................. C-2 Figure C-3. Preventative medicine area assessment ............................................................ C-5
Tables
Table 3-1. Minimum thickness (in inches) required for protection against enemy fire ........................................................................................................... 3-6 Table 3-2. Minimum thickness (in inches) required for protection against high-explosive shaped charges .......................................................................... 3-7
iv
FM 3-05.230
8 February 2009
Preface
Field Manual (FM) 3-05.230, Special Forces Tactical Facilities, supports key United States (U.S.) Army Special Forces (SF) doctrine. An SF tactical facility (TACFAC) is defined as any secure urban or rural facility that enables Army special operations forces (ARSOF) to extend command and control (C2), provides support for operations, and allows operational elements to influence a specified area. SF TACFACs include a variety of secure locations for SF operations, including (but not limited to) firebases, camps, and team houses.
PURPOSE
As with all doctrinal manuals, FM 3-05.230 is authoritative but not directive. It serves as a guide but does not preclude SF units from developing their own standing operating procedures (SOPs) to meet their needs. This FM focuses on the establishment, improvement, operations, and security of SF TACFACs.
SCOPE
This FM presents the details of the three phases of SF TACFAC development in an order that the SF Soldier should expect to encounter theminitial, temporary, and permanent. Additionally, this FM discusses in sequence planning, design, construction, operations, sustainment, funding, and transfer of authority. The primary audiences of this FM are the commanders, staff officers, and operational personnel of Special Forces operational detachments A (SFODAs), Special Forces operational detachments B (SFODBs), and Special Forces operational detachments C (SFODCs).
APPLICABILITY
Commanders and trainers should use this and other related manuals in conjunction with command guidance and the mission training plan (MTP) to plan, construct, and operate from SF TACFACs. This FM is applicable to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.
ADMINISTRATIVE INFORMATION
The proponent of this FM is the United States Army John F. Kennedy Special Warfare Center and School (USAJFKSWCS). Submit comments and recommended changes to Commander, USAJFKSWCS, ATTN: AOJK-DTD-SF, Fort Bragg, NC 28310-9610. This FM is designed to be UNCLASSIFIED in order to ensure the widest distribution possible to the appropriate ARSOF and other interested Department of Defense (DOD) and United States Government (USG) agencies while protecting technical or operational information from automatic dissemination under the International Exchange Program or by other means. Unless this publication states otherwise, masculine nouns and pronouns do not refer exclusively to men.
8 February 2009
FM 3-05.230
Chapter 1
OVERVIEW
1-1. SF operations support the operations and goals of the geographic combatant commanders (GCCs) and their subordinate joint force commanders (JFCs). SF TACFACs primarily serve as a base to support SF operations. As such, they serve an operationally defensive role. They allow SF units and partnered HN or multinational forces to meet the tasks and purposes of the defense and aid in setting the conditions for successful offensive operations, which can be either lethal or nonlethal. FM 3-0, Operations, defines defensive operations as combat operations conducted to defeat an enemy attack, gain time, economize forces, and develop favorable conditions for offensive or stability operations. 1-2. Several of the purposes of defensive operations are very closely related to SF TACFAC operations. These purposes include the following: Deter and defeat enemy attacks (such as insurgency operations). Achieve economy of force (such as allowing the JFC to concentrate conventional forces elsewhere against an enemy main effort). Retain key terrain (which includes the local populace). Protect the populace, critical assets, and infrastructure. Develop intelligence (particularly local intelligence). 1-3. SF TACFAC operations also can have a tremendous positive impact in support of friendly information operations (IO), as TACFACs are tangible proof of a stabilizing friendly-force presence. In order for U.S. Armed Forcesand SF in particularto have any positive effect on the local populations view of their government, local critical assets and infrastructure must be defended. These assets and infrastructure usually have more economic and political value than tactical military value. 1-4. Prior to selection of the TACFAC site, the Special Forces operational detachment (SFOD) must analyze the mission, enemy, terrain and weather, troops and support available, time available, and civil considerations (METT-TC). When planning and designing the TACFAC, the SFOD must take into account the factors critical to the security of the facility, including observation and fields of fire, avenues of approach, key terrain, obstacles, and cover and concealment (OAKOC). The SF TACFAC commander uses all available assets during defensive planning. These include intelligence, reconnaissance, and engineer
8 February 2009
FM 3-05.230
1-1
Chapter 1
assets to study the terrain. Optimum use of terrain, depth, and security operations allows the SFOD to minimize defensive resources. 1-5. The smallest SF unit tasked to operate and maintain an SF TACFAC is the SFODA. SFODBs and SFODCs that occupy TACFACs produce much larger tactical footprints in their areas of operation (AOs), which may be a distinct disadvantage. The larger advanced operating base (AOB) or special operations task force (SOTF) TACFAC needed to sustain a greater force requires additional logistics and protection support. 1-6. SF units must determine if there are advantages or disadvantages to breaking ground on a new facility or using an existing facility. Questions that are considered when making this decision include the following: Is the AO permissive, uncertain, or hostile? Are the facilities located in urban or rural settings? Are the facilities logistically sustainable? Are HN defense, security, and protection adequate? Are there established casualty and emergency evacuation plans? Are there future plans to close, convert, or abandon the facility? Are the facilities part of a larger operation with a yet-unspecified strategic plan? Are there Civil Affairs (CA) and Psychological Operations (PSYOP) missions in the AO? 1-7. In addition to the SFOD (or SFODs) occupying the TACFAC, the facility may also house vetted interpreters and other friendly force personnel on either a permanent or temporary basis. These friendly forces may include other U.S. or multinational force personnel (military, interagency, or contractor), HN personnel (military, constabulary, or civilian government), or irregular forces working with the SFOD. The SFOD must take into account both the size of these elements and any cultural considerations related to these various groups when developing a TACFAC.
1-2
FM 3-05.230
8 February 2009
which uses the acronym SWEAT-MS (sewage, water, electricity, academics, trash, medical, and security) to describe U.S. Army lines of effort in helping the local populations. 1-11. Although most of the SF TACFAC essential support systems are self-explanatory, there are two important points to note. Security is listed first in SWEAT-MSS because it is paramount in all tactical operations and therefore must be analyzed before anything else. Second, SWEAT-MSS uses the category of administration and HN training as an essential support system. 1-12. Administration is a relatively broad category which encompasses both the daily administrative and logistical concerns of running the TACFAC (Chapters 5 and 6 further discuss TACFAC support and funding) as well as the fundamental role that SF operationsbased out of the TACFACplay in enhancing the HN government role in developing and administering political, economic, and security control in the local area. As such, the SFOD must plan for HN training requirementstactical, administrative, and logistical. This includes having areas to meet with members of the HN populaceeven an initial phase TACFAC requires administrative areas to interact with HN government officials, tribal leaders, and local contractors. These areas are located inside the outer perimeter.
Temporary
Permanent
Electricity
Medical
Sewage
Shelter
8 February 2009
FM 3-05.230
1-3
Chapter 1
1-14. The TACFAC CNM analyzes specific requirements across the TACFAC essential support systems to identify critical requirements through the phases of TACFAC development. Much information can be drawn from the CNM through analysis of critical nodes or elements required to sustain or maintain a TACFAC and its critical systems. Through this process a logical progression is established between the different phases which helps guide commanders and staffs at all levels in planning for and supporting the development of the TACFAC. This is a major advantage for SF units, particularly during more intense and fluid operations, such as active COIN environments. 1-15. SFODs normally require additional nonorganic support to properly run their TACFACs and to allow them to properly function at full operational capacity. Without this support, the JFC will not get the full benefit of the SFODs very significant operational effects. The CNM helps in identifying existing shortfalls or gaps in personnel, equipment, and materials needed in order to establish or modify an existing TACFAC. By identifying these shortfalls or gaps early during the analysis process they can be properly forecasted or requested. The CNM can help to identify such potential personnel shortfalls as vehicle mechanics, generator mechanics, cooks, and medical augmentation. 1-16. As with personnel analysis, the CNM can help identify critical operational shortfalls. For example, a security systems analysis may identify the need for such tactical force augmentation as howitzer sections, counterfire radar systems, thermal imaging systems, or even infantry or military police forces. An administration systems analysis may identify requirements and opportunities for a PSYOP or CA team. The CNM not only benefits the end user, but is a useful tool for the supporting staff to identify, plan, and forecast future items needed to support the end users. 1-17. The second advantage to using the CNM is that it allows the commander to identify and analyze critical nodes or resources required to maintain or sustain an SF TACFAC and its critical support systems (SWEAT-MSS). Using this analysis process, a logical matrix support planning progression is established with primary, alternate, contingency, emergency (PACE) plans. 1-18. If an existing critical node in the SWEAT-MSS model fails anywhere within the matrix, the previous critical node is used as a substitute. For example, a rural SF TACFAC is in the final permanent development phase and the sewage plan fails. According to the PACE concept and the CNM, the alternate solution is to use the burn-barrel node of the previous (temporary) TACFAC development phase. If the alternate plan fails, the detachment uses the slit-trench node from the initial TACFAC development phase. This cascade of options is logical and controlled, and it serves the detachment until such time as the primary critical node system is repaired or replaced.
INITIAL PHASE
1-20. The initial development phase of a rural TACFAC begins when the first SF unit occupies the site. The initial facility may be used or occupied for only a short time and then abandoned or it may transition through one, two, or all three phases of development. When the initial phase begins, the facility usually is primitive and may include a large portion of undeveloped land (Figure 1-3, page 1-6). The major concerns of the SFODA during the initial development of a TACFAC include basic survival needs (for example, security, water, food, sanitation, and electric power). 1-21. Housing is rudimentarytypically in general purpose (GP) medium tents (Figure 1-4, page 1-6) or bivouac system modular tents (B-huts)and basic protective measures are implemented (such as 24-hour guards and short-duration patrols). Electric power is supplied by small, portable generators, such as the commercially procured 5-kilowatt generators assigned to most SFODs. Solar power may be used as an initial-phase energy source, along with the SFODs solar-powered battery rechargers. Basic comforts, such as indoor plumbing and running water, typically are nonexistent. To address water needs, a natural fresh-
1-4
FM 3-05.230
8 February 2009
water source (such as a stream) should be in close proximity. Rain water and potable water is stored in closed containers to prevent potential contamination and disease, and the SFOD constructs simple showers (Figure 1-5, page 1-7) for personal hygiene. Slit trenches and cat holes are used until the SFOD can construct burn-barrel latrines (Figure 1-6, page 1-7).
Initial
Security and Protection
24/7 SFODA security Triple-strand concertina Fighting positions
Temporary
Stackable barrier system walls Sandbag bunkers SFODA with HN augmentation
Permanent
Brick and mortar wall Observation tower HN augmented with SFODA
Bottled water Water purification kits Batteries 5 kW generator GP medium tents Sand tables Tape drill area Local burn pit
Underground well ROWPU 20 kW generator B-hut classrooms (HN construction) HN meeting area Local disposal (operational funds) SFODA dispensary HN treatment area Burn barrels B-huts
Medical
Special Forces medical sergeant helicopter landing zone kilowatt military occupational specialty polyvinyl chloride reverse-osmosis water purification unit
Figure 1-2. Rural Special Forces tactical facility critical nodes 1-22. As the TACFAC develops, security is enhanced and greater protective measures are put into practice. These measures include longer patrols, listening posts (LPs), observation posts (OPs), and additional wire around the facility perimeter. After basic security is established initial construction projectssuch as inner and outer perimeter barriersare built. Early projects may be hampered by the limited equipment and material assets carried in by the SF unit. The early initial projects are planned and coordinated prior to the SFODA arrival, which facilitates TACFAC construction.
8 February 2009
FM 3-05.230
1-5
Chapter 1
Figure 1-4. Initial phase rural tactical facility rudimentary housing (Africa)
1-6
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
1-7
Chapter 1
TEMPORARY PHASE
1-23. As the initial developmental phase of a rural TACFAC progresses, and new buildings are constructed and infrastructure renovations are made, the initial phase transforms into the temporary phase. During this phase, wood-framed buildings (Figure 1-7) or buildings made from common local construction materials replace tents and crude huts. In a temporary TACFAC, the SF units standard of living improves greatly over that of the initial facility, to include such creature comforts as improved wooden outhouses, potable running water, air conditioners, and heaters. Typical structures built during the temporary phase include an operations center (OPCEN), medical center, dining facility (DFAC), latrine (Figure 1-8, page 1-9), shower, and workshop accommodations. In a temporary TACFAC, most buildings are wired for electricity (Figure 1-9, page 1-9). The small, portable 5-kilowatt generator is replaced by larger generators, such as a U.S. Armyissue 20-kilowatt generator. The 5-kilowatt generator then becomes the alternate backup generator.
Figure 1-7. Temporary phase rural tactical facility wood-framed structures 1-24. In a temporary phase TACFAC, the SFOD applies enhanced protection measures and expands facility control outward to the access road and surrounding areas. Security patrols go further out into the surrounding area, and the SFOD continues to increase contact with the local populace. This contact improves opportunities to engage local residents on a variety of issues, and presents numerous chances to increase support for friendly-force operations and for the HN government. During this phase, it is critical that the local populace understands that the SFOD and HN presence will bring enhanced security and the possibility for multiple development projects. As the SFOD continues to gain HN trust and support, the construction of an HN meeting area or building in the administration area of the TACFAC is well under way. The physical security of the TACFAC remains a major concern, and the SFOD must continue to improve physical security measures. Earthen berms form barriers and, if possible, stackable barrier system walls are built. As new additions and upgrades to existing infrastructure take place, the site begins to transform from a temporary to a permanent TACFAC.
1-8
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
1-9
Chapter 1
PERMANENT PHASE
1-25. The third and final phase of a rural TACFAC is the permanent phase. This phase is initiated when the SF unit expects to occupy the facility for an extended period of time. The permanent rural TACFAC is better developed, organized, maintained, and prepared to handle security emergencies than the initial or temporary TACFAC. The outer barrier may be a mud or brick wall, and security patrols are conducted at random. 1-26. The permanent rural TACFAC should have a minimum of two covered and protected 200-kilowatt diesel-electric generators (Figure 1-10). They should be of the same brand, type, and electrical capacity to minimize spare parts and optimize efficiency. If necessary, parts can be interchanged. The generator designated as primary is used for all daily electrical requirements. All other generators can provide electrical backup during scheduled outages, routine maintenance, repairs, and emergencies.
Figure 1-10. Redundant permanent phase generators 1-27. The permanent TACFAC differs from initial and temporary facilities in that the facility occupies not only one or two buildings, but an enclosed building complex. This complex offers greater security and improved protection options. Permanent facilities incorporate PACE security planning for water, electricity, medical treatment, communications, personnel security, and secure storage of ammunition and fuel. Critical spare parts should be kept on hand. 1-28. The SFODA achieves control of the access road, administration sector, and surrounding area using perimeter and barrier defenses in depth. An observation tower within the inner perimeter is a valuable asset. Multiple rows and strands of barbed wire, tanglefoot, and claymore mines should be emplaced. Stackable barrier systems (Figure 1-11, page 1-11) or fort-like barrier walls provide a great deal of security for the facility. Outer barrier walls common in the Middle East and Central Asia (Figure 1-12, page 1-11) are made from a local brown mud-type material and may be 4 to 5 meters high and 1 meter thick.
1-10
FM 3-05.230
8 February 2009
Figure 1-12. Tactical facility improved protection measuresolid, defensible mud wall
8 February 2009
FM 3-05.230
1-11
Chapter 1
Temporary
Perimeter fence Rooftop security SFODA with HN augmentation Local pumps ROWPU 20 kW generator Temporary classrooms HN meeting area
Permanent
Brick and mortar wall Observation tower HN augmented with SFODA Indoor plumbing 200 kW generator Local grid 25-meter range Rehearsal area Sanitary and secure landfill (contracted) Incinerator Clinic with U.S. and HN medical augmentation
Burn pit
Local disposal (operational funds) SFODA dispensary HN treatment area Septic tank Improved structures
Medical
Sewage Shelter
INITIAL PHASE
1-31. The biggest difference between the initial rural TACFAC and the initial urban TACFAC is the structure. In an urban TACFAC, the building likely already exists. Selection criteria include the following: Does the structure have a barrier around the perimeter, such as a fence or wall? Is the structure connected to the existing power grid and water and sewer systems?
1-12
FM 3-05.230
8 February 2009
1-32. Ideally, the initial structure will have most of the upgrades required to transition from an initial to a permanent TACFAC. If not, as a minimum, initial requirements include the following: 5-kilowatt generator. Indoor toilet, outhouse, or burn barrel. Perimeter protection (fence or brick wall). If no perimeter protection exists, continuous security patrols and observation are required.
TEMPORARY PHASE
1-33. If a perimeter wall or fence does not exist, it is installed during this phase of development. Also, the unit constructs a safe room. These additions create extra protection and explosive standoff distance. Other temporary urban upgrades include 2 or more 20-kilowatt generators, portable toilets, and extra rooftop security.
PERMANENT PHASE
1-34. In the permanent urban TACFAC phase, power-generation requirements may increase, thereby requiring a pair of 200-kilowatt generators of the same make, model, and capacity. Indoor plumbing and sewerage services are made available. Outside security is enhanced with the addition of a rooftop guard tower; permanent, industrial grade security cameras; motion-activated lights; sensors, including electrooptical devices; and increased active and passive security and surveillance measures.
SUMMARY
1-35. As the TACFAC progresses through the three phases of development in both rural and urban environments, the previous phase remains a part of the PACE plan for TACFAC operations. For example, small, portable, 5-kilowatt electric generators that were used as a primary source of power in the initial phase revert to contingency or emergency use in the temporary phase. 1-36. There are no clearly defined checklists or timelines for TACFAC development. New building construction may begin at any time during any phase, and upgrades, repairs, and maintenance should be constant. Defensive improvements and facility infrastructure improvements must be planned and developed according to METT-TC.
8 February 2009
FM 3-05.230
1-13
Chapter 2
SECTION IPLANNING
2-1. Armed with the basic requirements and phases of identifying and/or constructing a TACFAC, an SF unit conducts the standard military decision-making process (MDMP). The MDMP steps found in FM 5-0, Army Planning and Orders Production, and Graphic Training Aid (GTA) 31-01-003, Detachment Mission Planning Guide, help to determine the course of action (COA) required for each specific TACFAC to become operational. 2-2. The statement of requirement (SOR), area study (Appendix A), site survey (Appendix B), area assessment (Appendix C), and special operations debrief and retrieval system (SODARS) are five of many resource documents used during the predeployment planning process. Depending upon the mission, these documents may carry a security classification of CONFIDENTIAL or higher.
STATEMENT OF REQUIREMENTS
2-3. The intent of the SOR is to identify the requesting units logistic and materiel needsparticularly those that exceed their organic capabilitiesearly in the MDMP. This early identification becomes particularly relevant when an SF unit is tasked to develop an original TACFAC. 2-4. Once developed, consolidated, and prioritized, the SF unit routes the SOR through the chain of command. This ensures that mission supply (Classes I through X), facility maintenance, transportation, personnel, medical, signal, operational, and security needs are addressed and any shortcomings are identified as the SF unit continues to plan.
AREA STUDY
2-5. The area study provides initial information to the SFOD about the specific country where they will perform operations. It is a valuable planning resource, along with the site survey, area assessment, and the SODARS. (Appendix A provides the format for an area study.)
SITE SURVEY
2-6. The site survey team operates in a similar fashion to a reconnaissance patrol. Teams typically deploy in small units of two to six Soldiers and gather information. Soldiers on the survey team are from the unit that will occupy the selected site. The team conducts site surveys of potential TACFAC locations and documents the commanders critical information requirements (CCIRs) and other vital information. After the site survey is complete, the results of the CCIRs are shared, distributed, and coordinated with all pertinent units.
8 February 2009
FM 3-05.230
2-1
Chapter 2
2-7. As the SFOD develops a facility construction plan, the commander may also conduct an HN capability assessment. In particular, the commander gets answers to the following questions: Are the HN soldiers able to assist the SF unit during the facility construction process? Are personnel identified to provide and deliver heavy equipment to the chosen location? Are construction materials available in country, and who receives compensation? Are large-capacity diesel-electric generators and spare parts available for local purchase? Are HN heavy equipment operators available for hire and how are they to be paid? 2-8. The site survey team deploys with sufficient portable electronic data-collection and data-storage devices (for example, computers, cameras, hard drives, and discs). When the SFOD mission is identified as particularly exceptional, individuals with area-specific qualifications (subject-matter experts [SMEs]) may deploy with the site survey team. Because building a new SF TACFAC in an austere environment is a unique endeavor, survey teams should include at least one Special Forces engineer sergeant (MOS 18C) as an SME. 2-9. Although most thorough survey missions are lengthy because they require answers to detailed questions, some survey missions may require only limited TACFAC development criteria and basic site selection. On these survey missions, SFODs preview potential sites, make appropriate choices, and return to base. 2-10. A comprehensive site survey requires the SFODparticularly the 18Cto perform a complete review of all potential HN permanent structures and any available bare-ground locations that may require improvement. If a bare-ground site is selected, the initial site survey must include a tentative construction plan and a tentative bill of material. This plan includes any heavy construction vehicles, equipment, and personnel needed to build the TACFAC and addresses facility design, logistic accessibility, topographic layout, elevation, drainage, soil excavation, electric, plumbing, defense, and security considerations. The plan provides a tentative construction timeline that allows for the overall TACFAC construction stages to mesh together seamlessly. 2-11. A primary site survey consideration is the provision of seamless protection and security procedures for the SF TACFAC throughout each phase of construction. The SFOD determines who will provide this protection and how many personnel will be needed. 2-12. For a thorough survey, the SF unit incorporates an extensive and comprehensive resource review. This review may include verbal, written, and electronic media examples of lessons learned, unit afteraction reviews (AARs), and SORs used by other SF units. If possible, Soldiers may speak with other SFODs and senior SF unit leaders regarding previous TACFAC missions. Most unit AARs and reports from the Center for Army Lessons Learned (CALL) are UNCLASSIFIED. (Appendix B contains a site survey format.)
AREA ASSESSMENT
2-13. The initial area assessment begins very early in the MDMPimmediately after mission receipt. The principal area assessment effort is ongoing and continues to be updated after the SF unit arrives in country. This assessment forms the foundation for a large part of the SFODs subsequent activities in their AO. (Appendix C provides an area assessment format.)
2-2
FM 3-05.230
8 February 2009
SECTION IIDESIGN
2-15. The preferred design option for an SF TACFAC in a hostile environment is hardened, independent, and capable of supporting and protecting the SFOD and HN soldiers in the worst-case scenariothe TACFAC coming under siege. The facility is built around an inner perimeter OPCEN or tactical operations center (TOC). Buildings and support infrastructure house the SFOD and possibly other government agencies (OGAs), and HN soldiers with or without their dependents.
INNER PERIMETER
2-17. The inner perimeter is the heart of the SF TACFAC. Operational, administrative, and logistic operations are controlled from various hardened and protected buildings within this sector. At the very least, the SF unit should build one primary observation tower within the inner perimeter. Additional towers may be constructed as the TACFAC develops. The inner perimeter is vital to the defense of the TACFAC; it should be surrounded entirely and protected by an inner protective berm or wall.
8 February 2009
FM 3-05.230
2-3
Chapter 2
2-4
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
2-5
Chapter 2
Figure 2-5. Rocket predetonation sequence 2-21. Chain-link fencing or durable wire mesh is installed in front of the firing ports of each building or bunker at an appropriate distance (it must be measured and tested) to disrupt, predetonate, and defeat rocket-propelled grenades (RPGs) and thrown explosive satchels or grenades. Fence sections are placed at an angle to prevent oblique shots from penetrating. If only a limited supply of fencing and sturdy wire mesh is available, the SFOD must prioritize by buildings and bunkers. Priority RPG fencing should be placed on the outer perimeter bunkers first, followed by inner perimeter bunkers, and then buildings (when available).
2-6
FM 3-05.230
8 February 2009
2-22. Various combinations of materials and techniques are being used that provide increased protection against blast and fragmentation effects. By adding effective blast-resistant walls, predetonation cyclone fencing, and fragment-shielding corrugated roofing over existing TACFAC structures, the potential for casualties is greatly diminished.
8 February 2009
FM 3-05.230
2-7
Chapter 2
Spare batteries for the lighting systems. The lighting is connected to the contingency generator only if it is large enough to sustain both the communications equipment and lighting systems. Batteries or solar power can be used as an emergency power source. Small-arms with additional ammunition. Fragmentation, smoke, and WP grenades. Food, water, and first-aid supplies.
2-8
FM 3-05.230
8 February 2009
GENERATOR BUNKERS
2-31. Although the diesel-electric generator bunkers may be built belowground, they normally are built aboveground with a dual or reinforced roof. This is because the cramped space of belowground generator bunkers makes even simple repairs and maintenance more difficult. When built aboveground, generator bunkers are dispersed and well fortified with sandbags. Generator bunkers incorporate a few feet of space between the top of the sandbag walls and the bottom of the roof to allow heat to escape and maintain proper air flow.
8 February 2009
FM 3-05.230
2-9
Chapter 2
2-32. There must be a minimum of two generators on site; one generator is operational while the other generator is in reserve, repair, or maintenance mode. Diesel fuel for electric generators is stored safely away from other flammable material. Chemical fire extinguishers are tested for operability and kept close to the generator bunkers. All high-voltage power lines are buried deep enough to address potential safety concerns. However, the lines must not be buried so deep that a damaged line cannot be located, unearthed, and quickly repaired.
AMMUNITION BUNKERS
2-33. Ammunition storage bunkers may be built above or below ground level. Belowground construction must be avoided in areas where there is standing water or where the groundwater table is high. When built aboveground, ammunition bunkers may be integrated into the inner-perimeter berm. For example, a concrete structure or CONEX-type container covered on three sides by the inner berm or sandbags provides good protection and access. A dual roof provides more protection for the ammunition bunkers from indirect fire. 2-34. The Special Forces weapons sergeant (MOS 18B) ensures that ammunition bunkers are adequately stocked and secured. All ammunition is stored aboveground on standard wooden pallets. A diagram or picture identifying where all the ammunition is located should be posted on the inside of the bunker. Highexplosive (HE), WP, and illumination mortar ammunition are stored in quantity in the ammunition bunkers. All ammunition containers are sorted and palletized according to type and caliber to make the round type easy to identify. To open the ammunition containers, a tool box that includes a hammer, pry bar, and flashlight is kept in the bunker. The ammunition bunkers are kept locked; however, the Soldier responsible for the bunker must ensure that all SF Soldiers have the keys or tools needed to gain immediate access to the ammunition.
MORTAR POSITIONS
2-35. Mortar positions located inside the inner perimeter may be above or below ground level. For optimum protection, mortar pits are built belowground, and the interior is revetted using concrete or a minimum of two layers of sandbags. The position may be strengthened further using standard 55-gallon drums or steel howitzer-propellant shipping containers filled with earth. A tarp should be used to protect the mortar from the elements. The mortar position (Figure 2-8, page 2-11) must allow for a clear, 360degree field of fire. 2-36. The 18B, in coordination with the designated mortar gunners, ensures that an assortment of mortar rounds is prepared for rapid response. Ready-racked ammunition includes HE quick rounds with the propellant charges cut for preplanned defensive fire missions. Illumination rounds have the time-delay fuse preset and the charges cut. Ammunition stocks are rotated; the oldest rounds are used first. 2-37. Because metal ammunition cans cause unintended sparks, wooden ammunition crates are used to store the accumulation of unused flammable mortar powder bag propellant charges. A chemical fire extinguisher must be readily available. 2-38. A call-for-fire checklist is established for mortars and communication equipment. The senior 18B coordinates with the senior Special Forces communications sergeant (MOS 18E) to ensure all communication equipment functions correctly. Communications and firing procedures must be rehearsed.
2-10
FM 3-05.230
8 February 2009
Figure 2-8. Mortar position 2-40. The supply and arms room (particularly the arms room section) must be properly secured at all times. One technique used to secure the area is to provide HN and SF sleeping quarters within the building and rotate guard responsibilities using a duty roster.
VEHICLE REVETMENTS
2-41. Vehicle revetments are used as hull-down covered and concealed parking bays for tactical combat vehicles. One common construction technique requires earth removal and build-up protection using the displaced earth and 55-gallon drums. However, revetments also are constructed using stackable barrier systems. Revetments are dispersed throughout the inner perimeter. Tactical vehicles may be backed into the positions so that they can be moved rapidly in emergencies. Depending upon the tactical situation and the amount of space available, SF units may include primary and alternate revetments for armored vehicles and artillery pieces.
LATRINES
2-42. The senior 18D is accountable for the construction of a sufficient number of latrine sites throughout the TACFAC sectors. Latrines should be placed near shower locations and an appropriate distance from living and working areas. The number and size of the latrine facilities vary according to the number of personnel operating in the TACFAC. The 18D may construct a field-expedient burn barrel latrine (solid and liquid waste-disposal system) using 55-gallon drums.
8 February 2009
FM 3-05.230
2-11
Chapter 2
TRASH POINT
2-43. Trash generated in the inner perimeter can be burned in 55-gallon drums. Trash from the other sectors should be burned in the outer perimeter (or beyond) to prevent the spread of disease. Fire extinguishers must be available wherever trash is burnt.
EMERGENCY SIGNALS
2-44. An emergency signal technique, such as a fire arrow, is constructed in the inner perimeter to signal support aircraft. When all other forms of electronic communications and navigation systems fail, the fire arrow allows aircraft to rapidly acquire the direction and distance to the emergency.
FIRE POINTS
2-45. Fire extinguishers, firefighting stations, and smoke detectors are positioned throughout the TACFAC. The senior 18C has the responsibility to emplace and maintain chemical fire extinguishers at firefighting stations throughout the facility. Fire extinguishers must be available for all vehicles, occupied buildings, and hazardous equipment, fuel, and ammunition storage areas. 2-46. When available, a good fire-control asset is a water tanker truck or trailer with adequate pumping capacity, sufficient water and hoses, and a trained firefighting team centrally located within the inner perimeter. A man-portable wheeled fire-containment system may suffice in smaller TACFACs. Firefighting stations are fabricated using 55-gallon drums and buckets.
PERIMETER ROAD
2-51. The perimeter road is a utility road that encircles the TACFAC along the inside of the outer barrier. It is used primarily to transport personnel, material, and equipment to service construction and maintenance
2-12
FM 3-05.230
8 February 2009
projects. It often is safer and easier to approach maintenance and repair problems from inside the TACFAC. However, during TACFAC defense operations, the perimeter road within the security envelope of the TACFAC provides a rapid and protected route to quickly move men or materiel within the facility.
FLARES
2-55. Trip flares are attached to all wire fences of the barriers. Flares provide two key benefits to the occupants of the TACFAC. First, they serve as early-warning devices, alerting the SF unit to potential security breaches. Second, they provide illumination to help identify and engage potential targets. Flares are prone to deterioration, and they must be inspected, maintained, and replaced regularly. 2-56. Trip flares also are attached to a separate solid metal or wooden stake located on the friendly side of the wire. Trip wires run forwardthrough the obstacleto the outer enemy side of the wire. This technique makes it more difficult for the enemy to disarm the flares.
TANGLEFOOT
2-57. Tanglefoot is employed to disrupt enemy assaults and sappers. Tanglefoot fields may be 10 meters deep and staked at irregular intervals between 1 to 2 meters. Barbed wire is strung from these stakes in an irregular crisscrossed pattern 6 to 8 inches above the ground. Positioning wire at this height prevents an
8 February 2009
FM 3-05.230
2-13
Chapter 2
assaulting force from gaining momentum. Furthermore, crawling adversaries need to rise up to climb over the wire, thereby presenting an easily engaged target.
CANALIZING FENCES
2-59. Canalizing fences are constructed using triple-strand concertina wire. These fences crisscross all wire fences, entanglements, and obstacle belts of the outer barrier. The purpose of the canalizing fences is to slow and funnel the enemy into the path of heavy automatic weapons fire. Note: Detailed instruction for constructing fences using triple-strand concertina wire may be found in FM 5-34.
TRENCHES
2-60. Trenches provide cover and concealment for friendly personnel moving throughout the TACFAC. They may be used by personnel as a line of communication (LOC) to carry litters, messages, or ammunition. Trenches provide a protected route for personnel movement during battle. The time, effort, expense, and maintenance required by a particular trench must be weighed to determine its overall value. 2-61. Trenches cross through the inner barrier to the outer perimeters in a random, zigzag pattern. However, the outer perimeter trench completely encircles the inside of the outer perimeter and connects all the defensive positions. All trenches need to be at least 6 feet deep and wide enough to permit two-way foot traffic and litter carry. Retaining walls are used to prevent erosion and cave-ins caused by adverse weather. Additional information regarding trench construction may be found in FM 5-34.
OUTER PERIMETER
2-62. The outer perimeter contains key TACFAC defensive positions and most of the HN force. Layers of defensive fighting positions, bunkers (Figure 2-9, page 2-15), and buildings are located in the outer perimeter. Outer-perimeter features include fighting bunkers, HN force housing, sleeping bunkers, ammunition bunkers, observation towers, vehicle revetments, mortar positions, company command-post bunkers, latrines, water points, firefighting points, a DFAC, a motor pool, a fuel point, and a perimeter trench system. The outer-perimeter trench connects the sector fighting positions, command posts, mortar pits, and ammunition bunkers with the trench system of the inner perimeter. The outer perimeter typically has at least a 25-meter range and small-arms test-fire area.
FIGHTING BUNKERS
2-63. Outer-perimeter fighting bunkers should be constructed belowground, thereby allowing innerperimeter bunkers (at a higher elevation) to engage targets by firing over the heads of friendly forces. The bunkers should be at least 6 feet deep. Logs or other building material used for the sides and roof should be at least 6 inches thick. Each fighting bunker should contain at least one automatic weapon, ammunition, grenades (fragmentation, smoke, and WP), first-aid kit, food, and water. All positions should have range cards, sector sketches, and photographs of their assigned target areas. A section of wire fencing should cover the firing ports to defeat RPG rounds and thrown grenades. Additional information on bunker construction may be found in FM 5-34.
2-14
FM 3-05.230
8 February 2009
AMMUNITION BUNKERS
2-66. Belowground ammunition bunkers should be constructed on the outer perimeter, with the doors facing to the inside of the TACFAC. Most four-sided TACFACs have four ammunition bunkers because when ammunition bunkers are dispersed, they facilitate distribution. More importantly, bunker disbursement prevents any single bunker explosion from depleting all TACFAC ammunition. The bunkers should be positioned close to the intersection of the communications trench and the outer perimeter, allowing easy access by personnel of the HN-force defensive positions. Ammunition bunkers should have a double-wide door for easy movement of ammunition pallets and crates. A dual roof provides extra protection against indirect fire.
8 February 2009
FM 3-05.230
2-15
Chapter 2
OUTER-PERIMETER TRENCH
2-67. The outer-perimeter trench inside the TACFAC encircles and connects all the defensive positions of the outer perimeter. The trench system should be deep and wide enough for two-way foot traffic and litter carry by two SF Soldiers. Adequate drainage must be considered during the initial planning process. Each section of the trench contains numerous individual fighting positions with firing ports positioned to cover the outer barrier, firing step-ups, and grenade sumps. The rear wall of the perimeter trench can also serve as an alternate command post in the event that the primary command post is destroyed.
OBSERVATION TOWERS
2-68. Observation towers enhance TACFAC defense when emplaced around the outer perimeter. These towers are designed to increase the visibility for the SF unit and to facilitate coordination for interlocking fires. A square rural permanent TACFAC should employ at least five guard towersone in the center and one at each corner (Figure 2-11, page 2-17). Depending on the threat and the environment, employment of sniper blinds may be used to restrict the enemys view of the inside of the perimeter guard towers. The bases of the towers should be enclosed with concertina wire. To maintain secure access, a ladder should be manually raised and lowered by the tower personnel. The guard tower includes a ready supply of Main-gun ammunition. Fragmentation, smoke, and WP grenades. Food and water. First-aid supplies.
2-16
FM 3-05.230
8 February 2009
Communications equipment and laser rangefinder or compass (with extra batteries for electronic components). NVGs and thermal imaging equipment (with extra batteries). Range card.
VEHICLE REVETMENTS
2-69. Outer-perimeter vehicle revetments are constructed in the same manner as the inner-perimeter vehicle revetments. The revetments are built parallel to the perimeter trench to afford vehicle protection from both friendly and enemy fire. Vehicles may back into defensive positions to allow turret weapons to be used during attacks.
MORTAR POSITIONS
2-70. Although light mortars may be employed in the outer perimeter, most TACFACs employ 81millimeter medium mortars and 120-millimeter heavy mortars. As with the inner-perimeter mortar positions, outer-perimeter mortar positions are built belowground and have a supply of ammunition nearby. Adjacent bunkers with overhead cover serve as crew shelters and ammunition storage bunkers.
8 February 2009
FM 3-05.230
2-17
Chapter 2
WATER POINT
2-72. A TACFAC water point, such as a safe and secure well, is central to the survival of SF and HN personnel. During original construction of the facility, the plans for a potable water system must center on the worst-case scenariothe TACFAC coming under siege. Emergency water storage tanks are built at and above ground level throughout the TACFAC. Using pumps, filters, and purification systems, the water point provides potable running water in as many buildings as possible. A few designated aboveground structures serve as shower points for SF and HN personnel.
FIRE POINTS
2-73. Firefighting equipment, such as extinguishers and buckets, are positioned throughout the outer perimeter. The construction of firefighting stations and placement of extinguishers is similar to those of the inner perimeter.
DINING FACILITY
2-74. The aboveground DFAC includes a dining area, kitchen area, food-processing area, food-storage area, and food-service line. The 18D and HN medical personnel monitor the food supply and foodpreparation procedures. Whenever possible, U.S. personnel make every effort to eat and drink the same ethnic food and beverages as the HN personnel.
MOTOR POOL
2-75. The outer-perimeter motor pool may be a building or a covered storage shed dedicated to the service and repair of vehicles. It has several rooms at one end used for parts storage and office space. Unserviceable vehicles are kept in the motor pool overnight. Serviceable tactical vehicles are positioned inside the outer-perimeter vehicle revetments at night. A unit SOP is developed to include weekly vehicle and equipment maintenance.
FUEL POINT
2-76. The fuel point (Figure 2-12, page 2-19) is within the outer perimeter and is the main TACFAC storage area for diesel and gasoline. Fuel may be stored in approved fuel bladders, 55-gallon drums, or a fuel trailer away from other hazardous material. An appropriately sized enclosure completely surrounds the fuel point to contain hazardous liquids. Firefighting equipment and fire extinguishers are located nearby. Smaller reserve fuel-storage enclosure areas may be positioned near the primary and alternate dieselpowered electric generators. All tactical vehicles are topped off with fuel each time they return to the TACFAC. All other vehicles and equipment are fueled according to unit SOP.
TRASH POINT
2-77. An outer perimeter trash point is constructed a safe distance from the fuel point. Trash is burned away from occupied building and bunkers; however, it typically is located within the TACFAC to control personnel access and hazardous material.
WEAPONS RANGE
2-78. The outer perimeter usually is large enough to support a covered small-arms test-fire area and 25-meter range. If space is available, a long-distance range (1,000 meters or more), with shooting positions along the inner barrier berm, provides sustainment training for all HN and SF Soldiers. Prior to every mission, rifles, pistols, and machine guns must be test fired.
2-18
FM 3-05.230
8 February 2009
ADMINISTRATION AREA
2-79. A separate room or building made available for HN meetings facilitates TACFAC security. The TACFAC administration area allows SF personnel to maintain close contact with the local populace within their AO. Communication with the local populace provides the SFOD with human intelligence (HUMINT), thereby increasing their security during combat and reconnaissance patrols. The reciprocity between the SFOD and the local populace (winning hearts and minds) results in reduced enemy activity and greater security for the civilian population. This interaction allows the SFOD eventually to hand over the fight to the HN forces, defeat the insurgency, and return home. 2-80. The administration area is normally located between the outer barrier and the airfield, close to the surrounding area. The proximity of the administration sector to the TACFAC outer barrier depends upon METT-TC and HN support. Regardless of the distance, the SF unit maintains close contact with local HN personnel by offering medical, veterinary, and administration services in a secure location. Other key features of the administration area include the HN dispensary, the HLZ (Figure 2-13, page 2-20), an HN government building, the TACFAC main gate, and the main-gate bunkers.
DISPENSARY
2-81. An aboveground HN dispensary (Figure 2-14, page 2-20) may be located in the administration sector. Rows of sandbagsstacked two-deep and chest-higharound the outside of the dispensary provide protection for occupants against small-arms fire. The building may contain a waiting room, an office, a treatment room, and a ward room for patients that must stay overnight.
8 February 2009
FM 3-05.230
2-19
Chapter 2
2-20
FM 3-05.230
8 February 2009
2-82. The HN dispensary provides around-the-clock medical care to the HN force and local HN civilian personnel. HN medics and nurses normally handle dispensary night-shift operations; 18Ds remain on call for emergencies that exceed HN medical staff capabilities. The senior 18D is responsible for determining if patients need to be evacuated to rear-area medical support facilities.
GOVERNMENT BUILDING
2-84. The primary function of the HN government building is to make HN government services available to the local populace and HN soldiers. Because medical treatment is a primary government service and has a direct impact on the local perception of the government, the government building should be positioned close to the dispensary. The government building, constructed aboveground, is protected from small-arms fire by a double-stacked row of chest-high sandbags around the outside of the building. The building is open to the public only during hours of daylight. The SF unit must consider the possible requirement of protecting the HN government building staff and locals. The unit must have a plan for them to take refuge in the TACFAC prior to enemy offensive operations.
8 February 2009
FM 3-05.230
2-21
Chapter 2
2-85. The SF unit may decide to house these employees in the TACFAC administration or other surrounding area secure buildings during hours of darkness. Distinctive items of clothingsuch as colored vests (Figure 2-16)may be used to identify trustworthy and vetted HN staff and employees. When there is no viable HN military force in the AO, local HN protection becomes the responsibility of the SF unit. If the AO is unstable and not secure, governmental services cannot continue. HN civilians are relocated to a separate and secure compound in a nearby larger village.
MAIN GATE
2-86. The main gate (Figure 2-17, page 2-23) controls entry to the facility via the single access road that runs through the TACFAC to the main gate. There may also be a second, smaller personnel-only gate alongside the main gate or at the opposite end of the TACFAC. All HN workers enter through this gate where they are searched and pick up their identification badges or passes. HN workers are required to return all badges and passes prior to leaving the facility. HN workers are inspected and searched. Workers must not be permitted to bring mobile telephones, cameras, or recording devices into the TACFAC. Employment of emerging biometric technology by the SFOD will ensure that local workers and visitors are properly screened and identified. All gates must be guarded around the clock. There should be a minimum of two guards at each gate to screen all personnel and vehicles. At night, an additional sergeant of the guard is on duty.
2-22
FM 3-05.230
8 February 2009
Figure 2-17. Main gate entrance and confinement zone 2-87. The material used to construct the gate is in direct correlation to the threat. The gate may be constructed of wood and barbed wire or steel and concrete. The gate opening must be wide enough to allow a single lane of vehicular traffic. Bollards may be used to enforce traffic safety and security. 2-88. The SF unit may construct a confinement zone for all vehicle and foot traffic. Using this technique, a single narrow lane is created with steel bollards and concrete barriers. The road bed is made of rocks and loose gravel to encourage slow-speed travel. Vehicles entering the TACFAC wind around a series of obstacles and bollards under constant observation by TACFAC security forces. Hidden commanddetonated explosives or claymores may be positioned along the confinement zone.
MAIN-GATE BUNKERS
2-89. As least one (preferably two) bunkers may be constructed at each gate. The bunkers are equipped with automatic weapons and house electric and alternate manual controls to activate (raise) and deactivate (lower) the gate or security bollards. When activated, some types of bollards are capable of bringing a 25ton truck moving at 50 miles per hour to an immediate stop. 2-90. Main-gate bunkers are constructed in a manner similar to those of the inner and outer perimeter. All gate bunkers are manned around the clock. Normally, two bunkers (at either end of the confinement zone) are used as traffic control points. The main gate entrance bunker controls the flow of local HN personnel that have official business in the TACFAC. One or more of the outer barrier bunkers may be used to prevent or limit access of local HN workers to unauthorized TACFAC areas.
8 February 2009
FM 3-05.230
2-23
Chapter 2
ACCESS ROAD
2-91. The access road (Figure 2-18) is a secure single-lane road that passes through the TACFAC and connects to the main road outside the main gate. Because the access road breaches all critical TACFAC perimeters, obstacles, and barriers, special consideration must be given to its construction and security. Gates and guard posts are constructed along the road at each critical crossing point. Access road control may be enhanced by incorporating a number of guard posts, bollards, and confinement zones.
SURROUNDING AREA
2-92. The surrounding area is the largest of all the sectors and the most susceptible to attack. The area surrounding the TACFAC should contain cleared fields of fire, a perimeter road, a main road, and, if possible, an airfield. All civilian HN vehicles initially park in designated marked parking lots in the surrounding area. A nearby building is used as an HN meeting house to sort through and select vetted drivers, laborers, and other personnel on official TACFAC business. As personnel are cleared, they may continue to pass through the surrounding area and into the administration area.
2-24
FM 3-05.230
8 February 2009
2-94. The cleared fields of fire are as large as the SF unit can practically make them, extending at least beyond enemy rifle range (300 to 500 meters). Enemy forces may attempt to construct ambush sites, improvised explosive devices (IEDs), tunnels, or assault positions close to the TACFAC during hours of darkness. Prior to first light, the enemy camouflages their work and disperses. Moonless nights, periods of heavy rainfall, and thunderstorms are ideal weather conditions for adversary construction activities. These projects may continue for days, weeks, or even months. To mitigate the threat of enemy construction, TACFAC reconnaissance patrols must be conducted at irregular and random intervals and locations throughout the AO. 2-95. Cleared fields of fire also provide an ideal known distance (KD) shooting range. Small berms are built at various known distances and reactive steel targets provide instant feedback to the shooter.
MAIN ROAD
2-96. The main road or highway serves as the primary link between the TACFAC and other surrounding area towns and villages within the TACFAC AO. Normally, this road is heavily travelled by military and civilian vehicles.
AIRFIELD
2-97. U.S. Army utility and cargo helicopters (such as the UH-60 Blackhawk and CH-47 Chinook) usually are required for high-priority operational missions and may be unavailable to deliver sufficient resupply to SF TACFACs. Many rural TACFACsparticularly the larger AOBswill require an airfield so that United States Air Force (USAF) cargo aircraft can provide resupply. Enemy forces will quickly grasp the importance of the airfield to TACFAC survival. The SF unit must furnish adequate security for the airfield to prevent enemy disruption during vital resupply efforts.
8 February 2009
FM 3-05.230
2-25
Chapter 3
CONSTRUCTION PRINCIPLES
3-1. All TACFACs have a similar purpose, and SFODs perform operations in a parallel manner regardless of the diverse environments. However, the TACFAC construction principles remain uniform for aboveground, ground-level, or belowground structures. Construction principles incorporate METT-TC, terrain analysis, available materials, water table, soil content, weather, and the construction abilities of the SFOD. 3-2. Most administrative buildings are built aboveground using wood frames with plywood floors and walls. In mild climates, solid walls may be built to hip-level, with wire-mesh screening forming the upper portions of the wall. Adequate sandbag protection must be considered. Perimeter operational structures used to house SF Soldiers or to store hazardous material, ammunition, and fuel should be protected and constructed belowground.
FLOORS
3-4. Buildings and bunker fighting position floors may be made from almost any material, provided it resists weathering, wear, and traffic. Concrete slabs provide the most effective flooring surface. Soil or sand may be used if other resources are unavailable; however, they are least resistant to water damage, rotting, and foot and vehicle traffic. Wood pallets or other field-expedient materials may be cut to fit floor areas. Drainage sumps or drains are installed where excess water is a problem.
WALLS
3-5. Walls of buildings and fighting positions are of two basic typesbelowground (earth or revetted earth) and aboveground. Belowground walls are made using the in-place soil remaining after excavation of the position. This soil will need revetment for support. The amount of support depends upon soil properties, drainage, and the angle and depth of cut. Aboveground walls are normally constructed to provide shielding from direct fire and indirect fragmentation. These walls are usually built of sandbags, concrete, or other local materials.
8 February 2009
FM 3-05.230
3-1
Chapter 3
ROOFS
3-6. Roofs of buildings and fighting positions are designed to support overhead cover as shielding from mortar fragments and small-caliber direct fire. Contact-burst protection requires much stronger roof structures and requires careful material selection and design. Roofs able to support adequate shielding are constructed of sturdy concrete or steel.
MACHINE-GUN BUNKERS
3-7. Most machine-gun bunkers feature a single firing port for each machine gun and may be configured for up to three machine guns. Sandbags surrounding machine-gun bunkers are more durable when capped with concrete. The bunker may connect to a perimeter trench with an entrance that has at least one 90-degree turn (to protect against hand grenades). If multiple machine guns are employed in a single bunker, the fields of fire of the machine guns overlap. 3-8. A bunker with three machine guns provides an enormous amount of defensive firepower; however, there are a number of drawbacks to such positions. When three guns are employed in a single position, the size of the machine-gun bunker must be increased. This requires additional material and labor. Furthermore, three machine guns firing from a single position may potentially use excessive amounts of ammunition. This requires a larger ammunition storage area and demands more Soldiers. The machine guns make up a large percentage of the units overall firepower; if grouped together in such close proximity, the elimination of this single bunker may effectively cripple the TACFAC. 3-9. Excavation for a single machine-gun bunker produces a cube-shaped hole measuring 5 to 7 feet on all sides. The excavated dirt is used to fill sandbags to emplace around the bunker. The hole is revetted with planks, sandbags, or corrugated steel. Layered sandbags are used to create the walls for roof support. A 463L cargo pallet is used as the basis for the roof. On top of the pallet, an application of tar paper is used for additional waterproofing. Sandbags are stacked on top of the tar paper. For extra roof support and stability, vertical 4-inch by 4-inch posts may be placed along the inside walls of the bunker. The exterior sandbags of the emplacement can be capped in concrete to protect sandbags and lumber from deterioration caused by sunlight, rain, insects, and foot traffic.
MORTAR POSITIONS
3-10. The SF unit may have 60-millimeter, 81-millimeter, and 120-millimeter mortars at their disposal. Ground-level or, ideally, belowground mortar positions are constructed for each mortar. The SF unit constructs a pit by excavating a circular area, approximately 10 feet in diameter. The floor of the pit will remain bare earth to facilitate water runoff and allow Soldiers to properly set the mortar base plate. Because mortar aiming is based on the concept that 6,400 mils comprise a circle, the SF unit should paint or apply legible mil-number markings around the inside circumference of the pit with luminescent paint or tape (Figures 3-1 and 3-2, page 3-3). These markings facilitate placing faster and more accurate rounds on target. 3-11. An effective field-expedient and ground-level pit can be built using sand-filled 55-gallon drums or stackable barrier system-type barriers. The unit places the drums or barriers in a circle and stacks a double layer of sandbags around the inside and outside of the drums, creating an impenetrable small arms barrier. All exposed sandbags should be capped with concrete. 3-12. Regardless of the design used, the mortar crew needs an easily accessible entryway. An enclosed and protected ammunition supply bunker is attached to the mortar position. A supply of mortar rounds is kept readily available for emergency and immediate-use fire missions. These rounds include HE, WP, and illumination rounds.
3-2
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
3-3
Chapter 3
OBSERVATION TOWERS
3-13. Observation towers (Figure 3-3) enhance TACFAC security and communications. The overall protection and security posture is improved using machine guns and other crew-served weapons mounted higher than the surrounding facility buildings. This allows for larger fields of fire over the tops of buildings. Communications are more effective when antennae have unobstructed surroundings.
3-4
FM 3-05.230
8 February 2009
3-14. Observation towers should be constructed from a steel or thick wooden framework. A group of four towers with overlapping fires present an intimidating obstacle to any attacking force. As such, observation towers become prime targets of an attacking force. They must be designed and built to withstand attack from small-arms and RPG fire.
FIGHTING TRENCHES
3-15. Fighting trenches should be constructed approximately 5 feet high and 3 feet wide and include earthen parapets. These dimensions provide safe protection for a two-man litter carry. Trenches should be built in a zigzag pattern. Parapets should be built using a minimum of two layers of sandbags (capped with concrete) with multiple firing ports at varying intervals. 3-16. Full use should be made of all available natural building materials (such as trees, logs, and brush) for constructing and camouflaging covered and concealed emplacements and shelters. Manufactured materials (such as pickets, barbed wire, concrete [Figure 3-4], lumber, sandbags, and corrugated metal) are supplied by contractors or military support organizations. Captured enemy supplies, locally procured material, and demolished structures are additional sources of fortification building materials.
Figure 3-4. Indigenous employees mixing cement 3-17. When native materials are not available, units may use stackable barrier systems for vertical support and protection. A detailed list of construction materials and standards is provided in Table 3-1, page 3-6, and Table 3-2, page 3-7.
8 February 2009
FM 3-05.230
3-5
Chapter 3
Table 3-1. Minimum thickness (in inches) required for protection against enemy fire
Material 7.62-mm Small Caliber and Machine Gun Fire at 100 Yards 1 76-mm Antitank Rifle at 100 Yards 20-mm Antitank Fire at 200 Yards 37-mm Antitank Fire at 400 Yards 50-mm Antitank Fire at 400 Yards 75-mm Direct Fire at 5001000 Yards
Solid Walls Brick Masonry Concrete (Not Reinforced) Stone Masonry Timber Wood Brick, Rubble Clay (Dry)
4 3
18 12 6 12 36 24 12 36 12 24 12 20 40 20 30 20 42
30 24 18 30 48
2
60 42 36 42 60 60 60 60 60 60
48 42 54 72 72 72 70 70 70
54 48 60 v v
Loam Sand
36 24 80 24 18 72 180
Frozen Snow Frozen Soil Icecrete (Ice and Aggregate) Tamped Snow Unpacked Snow Notes:
1 2 3 4 5
One burst of 5 rounds. Thicknesses to nearest 6 inches. Plain formed 3000 pound-per-square-inch (psi) concrete walls. Add 100% to thickness if wet. Add 50% to thickness if wet.
Except where indicated, protective thicknesses are for a single shot only. Where weapons place five or six direct-fire projectiles in the same area, the required protective thickness is approximately twice that indicated. Where no value is given, material is not recommended.
3-6
FM 3-05.230
8 February 2009
Table 3-2. Minimum thickness (in inches) required for protection against high-explosive shaped charges
Material
Aluminum Concrete Granite Rock Snow (Packed) Soil Soil (Frozen) Steel Wood (Dry) Wood (Green) Notes: Thicknesses assume impact is perpendicular to surface. Protective thicknesses are for a single shot only. Where no value is given, material is not recommended.
85-mm RPG-7
30 30 24 24 156 78 39 18 90 48
120-mm Sagger
36 36 30 36 96 48 24 108 66
3-18. Materials and construction techniques used throughout Vietnam to construct SF base camps varied widely. The following vignette depicts the adaptability, ingenuity, and resourcefulness of the individual Vietnam-era SF Soldiers in their use of construction materials. This same resourcefulness can be found among present-day SF Soldiers operating in a wide range of environments.
8 February 2009
FM 3-05.230
3-7
Chapter 3
Local Vietnamese merchants supplying dimensional lumber helped stimulate the local economy. Other Southeast Asian countries and the Philippines also provided lumber. Conventional military supply channels turned out a plethora of burlap and plastic sandbags. Additionally, items that were designed for one purpose evolved into another purposefield-expedient construction material. Wooden or metal pallets, 55gallon drums, metal shipping containers, corrugated sheeting and piping, cinder blocks, wire mesh, and chain-link fencing began to identify TACFACs throughout Vietnam.
CONCRETE
3-19. Concrete is very durable and an ideal building material for an SF TACFAC. It can be made even more durable by using steel reinforcing rods (rebar) when pouring concrete for an HLZ or airfield runway. Vibrating concrete increases the compressive strength and bond between concrete and rebar and decreases concrete permeability; decreases cold joints, honeycombing, excessive entrapped air and segregation; and causes concrete within a circular field of action to act like a liquid. 3-20. The SF unit may use a flex-shaft concrete vibrator, such as the Multiquip flex-shaft concrete vibrators designed to work in medium- to high-slump concrete. The Multiquip model BP25H is backpackportable with a 2.1-horsepower Honda engine. Additional information regarding concrete-handling equipment may be found at www.multiquip.com/. 3-21. To use a concrete vibrator, the SF unit Inserts the vibrator vertically, allowing it to penetrate rapidly to the bottom of the lift and at least 6 inches into the previous lift. Holds at bottom of lift for 5 to 15 seconds. Pulls the vibrator up at a rate of 15 seconds for a 4-foot lift (approximately 3 inches per second). Note: To determine proper spacing when using a concrete vibrator, the SF unit should insert the vibrator so the fields of action overlap. The concrete must be observed to determine the vibrator field of action; high-powered vibrators and high-slump concrete have large fields of action. As a rule of thumb, the field of action is 8 times the diameter of the vibrator head. 3-22. The SF unit should stop vibrating the concrete when The concrete surface takes on a sheen. Large air bubbles no longer escape. The vibrator changes pitch or tone. A change in vibrator action is felt. Note: The vibrator should not be run outside of the concrete, as it will cause it to overheat. Vibrators should not be used to move concrete horizontally. Vibrators should not be forced or pushed into concrete, as it may not remain vertical and may get caught in the reinforcement.
ROCK
3-23. Direct and indirect fire fragmentation penetration into rock depends on the physical properties of the rock and the number of joints, fractures, and other irregularities contained therein. These irregularities weaken rock and can increase penetration. Several layers of irregularly-shaped rock can change the angle of penetration. Hard rock can cause a projectile or fragment to flatten and stop penetration.
3-8
FM 3-05.230
8 February 2009
WOOD
3-25. Direct and indirect fire fragmentation protection using wood is limited because of its low density and relatively low compressive strengths. Wood is generally used as structural support for bunkers and buildings. Wood is less effective than soil for protection against penetration, and, with its low ignition point, it is easily destroyed by fire. In a tropical climate, wood is subject to weather extremes, animals, birds, insects, and harmful fungus that degrades wood in short order. 3-26. Building a roof using native hardwoods (at least 6 inches in diameter), the SF unit installs two layers of logs as a roof. The second log layer is installed perpendicular to the first, and both layers provide an overhang of 12 to 24 inches. Layers of sandbags and corrugated sheeting may be positioned between and above the log layers to help absorb mortar blasts. Because the level of protection afforded by these layers results in a sizeable increase in roof weight, more and larger vertical supports will be required.
SANDBAGS
3-27. The walls of buildings and fighting positions are built of sandbags in much the same way bricks are used; however, they should be used only to protectnot to supportthe roof. When building with sandbags, a minimum depth of two layers is used. Sandbags also are useful for retaining-wall revetments. Most sandbags are made of an acrylic fabric that is rot and weather resistant. In most climates, plastic-
8 February 2009
FM 3-05.230
3-9
Chapter 3
based sandbags have a lifespan of 2 years with minimal deterioration. Older style burlap-based bags deteriorate much more quickly, particularly in tropical climates. The useful life of sandbags may be prolonged by filling them with a mixture of dry earth and cement, normally in the ratio of 1 part cement to 10 parts dry earth. The cement sets as the bags take on moisture. For sand and gravel mixtures, a 1 to 6 ratio is used. Filled bags may also be dipped and coated in cement-water slurry. Each sandbag is then pounded with a flat object, such as a section of lumber, to make retaining walls more stable. 3-28. Sandbags can be used for revetting walls or repairing trenches when the soil is very loose and requires a retaining wall. A sandbag revetment will not remain standing if it has a vertical face. The sandbag face must have a slope ratio of 1 to 4 toward the top of the wallleaning against the bare earth it holds in place. The base for the sandbag revetment must stand on firm ground. To construct a sandbag revetment wall, the SF unit Fills sandbags about three-quarters full with earth or a dry soil-cement mixture, ties the choke cords, and tucks the bottom corners of the bags after filling. Constructs the bottom row of the revetment by placing all bags as headers. Continues building the wall using alternating rows of stretchers and headers, with the joints broken between courses. Finishes the wall by making the top row of the revetment of headers. 3-29. Sandbags are positioned so that the planes between the layers have the same pitch as the baseat right angles to the slope of the revetment. All bags are placed so that side seams on stretchers and choked ends on headers are turned toward the revetted face. As the revetment is built, it is backfilled to shape the revetted face to the slope. 3-30. Often, the required amount of filled sandbags exceeds the capabilities of Soldiers and HN personnel equipped only with shovels. When the bags are filled from a large sand stockpile and using a lumber or steel funnel, the job is performed faster and more efficiently. 3-31. Sandbags are like any other piece of military equipment; once filled, they must be maintained, repaired, and replaced as necessary. Sandbags are similar in principle to the bulletproof vestthey are intended to contain, slow, dissipate, and stop the kinetic energy of high-speed projectiles and fragments. The constant onslaught of weather, insects, foot traffic, and enemy fire degrades the integrity and performance of sandbags.
PALLETS
3-32. Standard wooden cargo pallets measure 48 inches by 40 inches. Aluminum USAF 463L cargo pallets measure 108 inches by 88 inches. Both pallet types may be used as expedient construction material and may be integrated into revetted walls or flooring to provide extra support.
AMMUNITION CONTAINERS
3-33. Large wooden ammunition crates (such as those used to store artillery shells) and small ammunition boxes (such as those containing mortar rounds) are extremely useful and may be recycled to serve as flooring, shelving, ceilings, or field-expedient furniture. Ammunition containers also may be filled with dirt or sand and stacked to serve as makeshift sandbags. Because ammunition crates are not as stable as sandbags when stacked to any height, they must be supported by engineer stakes every few feet to prevent catastrophic collapse.
STEEL DRUMS
3-34. Empty steel drums can be used to make field-expedient solid waste burn-barrel latrines. To create a burn-barrel latrine, Soldiers cut a 55-gallon drum into halves. The barrel halves are partially filled with sand and placed underneath raised latrine seats. When required, the drum halves are pulled out, diesel fuel is added to the waste and lit, and the waste is allowed to burn in the open. Such burn barrels are cost-
3-10
FM 3-05.230
8 February 2009
efficient and sanitary; however, they do require personnel, fuel, fire extinguishers, and shovels. Additionally, burning waste produces copious amounts of deep black smoke with a noxious odor. 3-35. Liquid waste processing requires the construction of a field-expedient urine tube. To create the urine tube, the SF unit first digs a hole large enough to hold a perforated 55-gallon drum. The top of the drum is removed, and a plastic tubeapproximately 3 to 6 inches wide and 6 feet longis inserted into the drum at a depth of 3 to 4 feet. The drum is then filled with crushed rock or gravel and topped off with a layer of soil or sand. The tube extends 2 to 3 feet above ground level and the open end is covered with mosquito wire mesh. The completed drum assembly acts as a small, environmentally friendly leach field. 3-36. Steel 55-gallon drums have a number of additional useful applications in a TACFAC. SF Soldiers may remove one end of the drum, fill it with dirt or sand, and integrate it into a stackable barrier system. If 463L pallets are unavailable for roofing (and steel drums are plentiful), both ends of a drum may be removed and it may be flattened out and used as sheeting for additional roof or structure support. 3-37. In addition to their structural applications, steel drums also may be integrated into the facility defense plan. Drums may be filled with jellied fuel, napalm, or suitable flammable liquid alternatives and then rigged with command-detonated explosives. These drums are positioned along avenues of approach in the outer barrier. When command-detonated, not only will the fireball impede enemy progress and undermine enemy morale, it will also provide a source of illumination for defending forces during hours of darkness.
METAL PIPE
3-39. Corrugated metal piping is made in round or half-round sections ranging from a few inches to 8 feet in diameter. Most corrugated metal piping is zinc coated to protect against rust. Half-round and flanged pipe in diameters of 1 to 2 feet may be used for drainage and other purposes. Full-round corrugated pipes are used as culverts. Half-round sections of corrugated piping are stronger than the 463L metal pallets. These sections may be used as field-expedient bunker roofs, floors, and walls. Because corrugated metal pipes offer little protection against direct or indirect fire, sandbags must be stacked against any piping used as protection for U.S. personnel or equipment.
CINDER BLOCKS
3-40. The standard-size U.S. cinder block is 16 by 8 by 8 inches. Cinder blocks are particularly useful in tropical climates, where sandbags are prone to fail. These blocks may be used to construct walls of buildings and fighting positions, as well as to elevate personnel shelters, bunkers, and other buildings above flood level. When the dual cavities of cinder blocks are packed with concrete, sand, or dirt, they provide additional protection against projectiles. 3-41. Soldiers in the Vietnam era used construction resources similar to those being used in Iraq today. The key difference, however, is that there are greater numbers of local and international contractors available in the Iraq theater. Also, there is outstanding military and contract air and ground resupply presently available. The following vignette demonstrates the resourcefulness and adaptability of SF Soldiers in Vietnam. Their adaptability and resourcefulness is alive and well in Iraq, the Philippines, and Afghanistan today.
8 February 2009
FM 3-05.230
3-11
Chapter 3
FENCING
3-42. Chain-link and wire-mesh fencing may be used as field-expedient shielding against incoming RPGs or other shape-charged projectiles fired at protected buildings or bunkers. Innovative anti-RPG wire-mesh barriers also may be fabricated for vehicles, large diesel-electric generators, and fuel and ammunition storage sites.
3-12
FM 3-05.230
8 February 2009
Chapter 4
AREAS OF RESPONSIBILITY
4-1. The base commandant is responsible for establishing the long-term vision and priorities-of-work for the TACFAC. The commandant must consider available resources (such as manpower, building materials, and time available) and weigh them against the operational needs of the facility (such as C2, training requirements, and sustainment requirements). The base commandant ensures redundant systems by establishing contingency plans when possible, and periodically reviews the progress and adjusts the plan as needed. The commandant delegates responsibility of functions as needed to allow proper maturity of the TACFAC. 4-2. The facility manager controls the construction and maintenance of the facility through its development. Translating the intent of the base commandant and applying the resources needed to accomplish that intent, the facility manager supervises the labor force to ensure time and energy is applied in the most efficient means possible. The facility manager is also responsible for the usage of facilities (such as training areas or meeting areas) to deconflict scheduling. 4-3. The security manager ensures that the facility is protected from all possible threats and that appropriate risk management is applied in all areas in a given operational environment. The security manager establishes systems that restrict access to areas within the TACFAC and ensures that construction requirements (such as bunkers or fighting positions) are given at the appropriate level of priority by the facility manager. The security manager must establish systems that maintain operations security (OPSEC) and vet anyone granted access into the facility. 4-4. The medical coordinator ensures appropriate consideration is given to such medical impacts as location of SWEAT-MS facilities. The medical coordinator advises the base commandant of the potential medical effects in the planning and execution phases and establishes systems to handle medical emergencies.
OPERATIONAL ENVIRONMENTS
4-5. The SFOD plans and conducts SO in permissive, hostile, or uncertain operational environments. Understanding the operational environment and the threat potential are critical to the execution of security, protection, and TACFAC defense. Operational environments are composites of the conditions, circumstances, and influences that affect the employment of capabilities and bear on the decisions of the commander. There are as many operational environments as there are commanders and specific operations.
8 February 2009
FM 3-05.230
4-1
Chapter 4
PERMISSIVE ENVIRONMENT
4-6. A permissive environment is an operational environment in which HN military and law enforcement agencies (LEAs) have control and the intent and capability to assist operations that a unit intends to conduct. A permissive operational environment is the most preferable environment for a TACFAC because enemy offensive action is not likely. TACFAC defense measures may be as passive as increasing counterintelligence (CI) sweeps of local HN areas, coordinating with the regional security officer in the embassy, or erecting chain-link fences around vital locations.
HOSTILE ENVIRONMENT
4-7. A hostile environment is an operational environment in which hostile forces have control and the intent and capability to effectively oppose or react to the operations a unit intends to conduct. Hostile operational environments are the least preferred, most resource-intensive, and most dangerous of the three types of operational environments. Enemy intentions, capabilities, and potential are known, and friendly units must take necessary actions to address the threat.
UNCERTAIN ENVIRONMENT
4-8. An uncertain environment is an operational environment in which HN forces, whether opposed to or receptive to operations that a unit intends to conduct, do not have totally effective control of the territory and population in the intended operational area. An uncertain operational environment has characteristics of both permissive and hostile operational environments. TACFAC defense is more overt and active in uncertain environments. Operations in such environments require more training in the ROE.
THREAT LEVEL
4-9. Military Police (MP) or Infantry units should be used to aid in the defense of forward-deployed bases. FM 3-19.1, Military Police Operations, states that base commanders are responsible for addressing all Level I threats to the base. Although a TACFAC commander may request MP or Infantry augmentation at any threat level, the overall TACFAC defense always remains the responsibility of the TACFAC commander. In accordance with (IAW) FM 3-19.1, threats are divided into three levels. These levels provide a general description and categorization of threat activities, identify the defense requirements to counter them, and establish a common reference for planning guidelines.
LEVEL I
4-10. Level I threats are the lowest of the three threat levels; however, Level I threat environments are not considered safe because of the enemys ability to operate clandestinely. It is very resource intensive when the complexity of finding and defeating an enemy presents few (if any) overt indicators. Level I threats include the following types of individuals or activities: Enemy-controlled agents. Enemy-controlled agents are a potential threat to the SF TACFAC. These elements may include the clandestine and covert elements of the enemys forces, such as special-purpose forces, military intelligence (MI) personnel, and CI forces. Their primary missions include espionage, sabotage, subversion, and criminal activities. Their activities span the range of military operations and may include assassinating or kidnapping key military or civilian personnel or guiding special-purpose individuals or teams to the SF TACFAC. Enemy sympathizers. Civilians sympathetic to the enemy may become significant threats to the SF TACFAC. They may be the most difficult to neutralize because they normally are not part of an established enemy-agent network, and their actions are random and unpredictable. Indigenous groups sympathetic to the enemy or those simply opposed to the United States can be expected to provide assistance, information, and shelter to guerrilla and enemy unconventional or special-purpose forces operating in the area. Civil disturbances. Civil disturbances (such as demonstrations and riots) involving local issues and not directly involving enemy sympathizers may pose a direct or indirect threat to SF TACFACs.
4-2
FM 3-05.230
8 February 2009
LEVEL II
4-11. Level II threats are based on the enemys potential to conduct operations against the SF TACFAC. Level II threats represent more than just intelligence-gathering efforts. Examples of Level II threats include the following: Regular forces. Small tactical units, such as specially organized reconnaissance elements, are capable of conducting raids and ambushes in addition to their primary reconnaissance and intelligence-gathering missions. Irregular forces. Resistance and insurgent forces pose a serious threat to the SF TACFAC and the orderly conduct of the local government and services. They may establish and activate espionage networks, collect intelligence, carry out specific sabotage missions, develop target lists, and conduct damage assessments. Terrorists. Terrorists are among the most difficult threats to neutralize and destroy. Their actions span the full range of military operations.
LEVEL III
4-12. Level III threats are the highest threat level, and may have disastrous effects on the ability of U.S. forces to successfully execute strategic operations. Level III threats are made up of conventional forces capable of projecting combat power rapidly by land, air, or sea. Specific examples include airborne, heliborne, and amphibious operations; large, combined, ground-force operations; and infiltration operations involving large numbers of individuals or small groups infiltrated into friendly-controlled areas, regrouped at predetermined times and locations, and committed against priority targets. Level III forces may use a combination of the following tactics as a precursor to a full-scale offensive operation: Air or missile attack. Threat forces may be capable of launching an air or missile attack against the SF TACFAC. It is often difficult to distinguish quickly between a limited or full-scale attack before impact; therefore, protective measures should normally be based on the maximum threat capability. Chemical, biological, radiological, and nuclear (CBRN) attack. Commanders must be aware that CBRN munitions may be used in conjunction with air, missile, or other conventional force attacks. CBRN weapons may also be used at Level I or Level II by terrorists or unconventional forces in order to accomplish their political or military objectives.
JOINT FIRES
4-13. Joint fires are defined as fires delivered during the employment of forces from two or more components (Army, USAF, USN, or United States Marine Corps [USMC]) in coordinated action to produce desired effects in support of a common objective. Joint fires are weapons effects from joint operations and are provided to assist SO land, amphibious, and air forces; joint air operations; joint maneuver operations; and joint interdiction operations. 4-14. Joint fire support is defined as joint fires that assist air, land, maritime, and special operations forces (SOF) to move, maneuver, and control territory, populations, airspace, and key waters. Joint fire support may include, but is not limited to, the lethal effects of CAS) or CCA, artillery, rockets, missiles, and mortars, as well as the nonlethal effects of CA, IO, and PSYOP. The ability of the SFOD to synchronize joint fire support with security is essential during defensive operations. 4-15. Combining joint fires and security measures provides the SFOD needed firepower at decisive points to achieve surprise, psychological shock, momentum, and effects (death and destruction). These, in turn, assist the SFOD by not only destroying the enemy but also in shattering enemy morale and unit cohesion. 4-16. Face-to-face coordination is the preferred method for coordinating joint fire support with any unit providing support. Problems such as radio or frequency compatibility, language, call signs, authentication, safety considerations for munitions, and call-for-fire procedures should be resolved at these meetings. 4-17. Each SFG(A) now has a joint fires element (JFE) assigned. The JFE is made up of one major, one targeting warrant officer, and one senior noncommissioned officer (NCO), all from the Field Artillery (FA)
8 February 2009
FM 3-05.230
4-3
Chapter 4
branch. At the group level, the JFE advises the group commander and staff on the planning, synchronization, and execution of lethal and nonlethal fire support for subordinate elements. Additionally, each SF battalion also has a JFE assigned; this JFE is made up of one FA captain and one senior FA NCO. These personnel can provide in-depth knowledge to the SFODs on the full spectrum of fire support assets available to support TACFAC base defense.
INDIRECT FIRE
4-18. Artillery and mortars are reliable, 24-hour, all-weather fire support systems. Howitzers and mortars can provide fires with a variety of munitions within their respective ranges to support SFODs in their mission. Artillery can, and frequently is, attached to the SFOD at a TACFAC. In this case, the TACFAC serves as a firebase, and normally is referred to as a firebase. 4-19. Because of their limited firepower, SFODs must consider all available sources of fire support. SFODs usually have limited 60- or 81-millimeter mortars as organic fire support, but the limited range and the number of personnel required to man these systems may render them impractical during SO. SFODs may have access to other indirect fire assets in their AO based on other friendly units. These may include 120-millimeter mortars, 105- and 155-millimeter howitzers, high-mobility artillery rocket systems (HIMARSs), or multinational fire support systems. SFODs and fire support planners must consider the benefits and risks of these systems during planning. The location of units throughout the AO will determine what fire support is available. The distances involved or the geometry of the battlefield and the location and actions of the enemy will determine what assets can be used. 4-20. When the SFOD has priority of fires from artillery or mortars, the following indirect fire questions should be addressed: Where should the howitzer or mortar be positioned in order to support the operation? Will alternate or supplemental positions be needed? Is sufficient ammunition on hand to support the SFOD if in an extended contact scenario? Are the target reference points (TRPs) easily identifiable? Is there dead space that the howitzers cannot cover (due to the angle of fire) and can this space be covered with mortars instead? Are all members of the mission familiar with call-for-fire procedures? Are fires planned throughout the depth of the likely defensive engagement area? Are all obstacles covered by indirect fire? Have final protective fires been registered? Can specialty munitions (such as smoke and illumination rounds) enhance the defense?
4-4
FM 3-05.230
8 February 2009
1. Observer/Warning Order:
_______________________, THIS IS ______________________; FIRE MISSION; OVER. (Aircraft) (Observer)
2. Friendly Location/Mark:
MY POSITION ___________________________, MARKED BY______________________________. (TRP, Grid) (Strobe, Beacon, Infrared [IR] Strobe)
3. Target Location:
_________________________________________________________________________________. (Bearing [magnetic] & Range [meters], TRP, Grid)
4. Target Description/Mark:
________________, MARKED BY ____________________; OVER. (Target Description) (IR pointer, Tracer)
5. Remarks:
__________________________________________________________________. (Threats, Danger-Close Clearance, Restrictions, At My Command)
As Required:
1. Clearance: Transmission of the CCA brief is clearance to fire (unless danger-close). Danger-close ranges are IAW FM 3-09.32, Multiservice Procedures for the Joint Application of Firepower. For closer fire, the observer/commander must accept responsibility for increased risk. State CLEARED DANGER CLOSE on line 5. This clearance may be preplanned. 2. At my command: For positive control of the gunship, state AT MY COMMAND on line 5. The gunship will call READY FOR FIRE when ready.
RADARS
4-23. The U.S. Army currently uses a variety of manned and automated countermortar and counterfire radars to enhance protection. These systems are either active or passive. Active systems use directed energy (microwaves) and track reflected energy. Active systems track incoming rounds at different ranges, providing both a predicted point of impact (POI) and a point of origin (POO). Passive systems use acoustic sounding from several microphones and compare the differences to determine a location or direction to where the round originated.
8 February 2009
FM 3-05.230
4-5
Chapter 4
independently processes the detected events based on statistics from the signal content against the background noise, computes the line of bearing to the firing locations, and sends the line-of-bearing information to a central base-station laptop computer via a radio link. The base station performs source localizations via correlation and triangulation techniques. The approximate planning range of UTAMS is 13 kilometers.
Figure 4-2. Unattended transient acoustic measurement and signature intelligence system
AN/TPQ-36 RADAR
4-26. The AN/TPQ-36 (Figure 4-4, page 4-7) is optimized to locate short-range, high-angle, low-velocity indirect fire weapons such as mortars and short-range artillery. It also can locate longer-range artillery and rockets within its maximum range. Planning ranges for the AN/TPQ-36 are 14.5 kilometers for artillery, 18 kilometers for mortars, and 24 kilometers for rockets. The minimum range of the system is 750 meters. These planning ranges are where the highest probability of detection lies for the system design. The AN/TPQ-36 normally has a three-man team that operates and maintains the radar.
4-6
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
4-7
Chapter 4
AN/TPQ-37 RADAR
4-27. The AN/TPQ-37 (Figure 4-5) is optimized to locate long-range, low-angle, high-velocity weapons such as long-range artillery and rockets. However, it will also locate shorter-range, higher-angle, lowervelocity weapons, thereby complementing the AN/TPQ-36. The planning ranges used as a baseline to position the AN/TPQ-37 are 30 kilometers for mortars and 50 kilometers for rockets. The minimum range is 3 kilometers. These planning ranges are where the highest probability of detection lies for the system design. The AN/TPQ-37 normally has a seven-man team that operates and maintains the radar.
4-8
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
4-9
Chapter 4
Tactics and techniques. Is the supporting unit familiar with the U.S. call-for-fire format or does the supporting unit use a different system? Which format will be used? Are U.S. personnel familiar with the supporting unit call-for-fire format? Are the fire-direction procedures familiar or are instructions needed? ROE. What ROE do the multinational force follow? What are the differences between the ROE covering SF personnel in theater versus the multinational force? Do the multinational force ROE limit their ability to support U.S. forces in contact? What are the specific national caveats, if any? How do those caveats affect the mission? Indirect assets. What are the capabilities and limitations of the multinational fire support system? What munitions are available and what are their planning ranges? Will they need ammunition resupply and who is responsible for that resupply? Fire support coordination measures (FSCMs). Who will submit and disseminate appropriate FSCMs? Are both the multinational force and SF personnel familiar with FSCMs?
4-10
FM 3-05.230
8 February 2009
1. 2. 3. 4. 5. 6. 7. 8. 9.
Initial point (IP). A known position on the ground. Heading from the IP to the target. Distance from the IP to the target in nautical miles. Target elevation in feet above mean sea level. Target description. Target location coordinates. Type of mark, smoke, laser, etc. Location of friendly forces from the target, cardinal direction, and distance in meters. Egress direction and/or control point after attack.
Figure 4-7. Standard 9-line report format 4-36. Although FS assets are inherently offensive, FS also can be effectively employed to support the defense. In defensive operations, FS assets can be planned and used to cause the enemy to deploy prematurely, to deny the enemy access to critical terrain, or to slow or stop the enemys attack against facilities, checkpoints, or mission support sites (MSSs). FS assets can be assigned to support both the mobile and fixed elements of the defense. The SFOD may plan the defensive use of FS assets to Support the TACFAC fire support plan. Support the maneuver elements or quick reaction forces (QRFs) moving to aid the element in contact. Attack enemy forces that have penetrated friendly positions.
Preplanned Requests
4-39. Preplanned requests are CAS or CCA requirements the SFOD has foreseen early enough during mission planning to be included in the joint air tasking order (ATO) cycle. Defensive plans inherently cannot be preplanned; however, TRPs can be coordinated throughout the AO. Because preplanned CAS must be controlled by a JTAC, the SFOD may be required to request JTAC support through its AOB and SOTF as soon as the requirements for CAS are identified. The SFOD must submit a preplanned request for CAS and CCA prior to the requested cutoff time. Submission procedures for preplanned requests (such as the numbering system and the cutoff time for inclusion in the ATO) are theater-specific, and detailed guidance should be found in the combined joint special operations task force (CJSOTF) SOPs. CAS and CCA planners prepare requests using Department of Defense Form (DD Form) 1972 (Joint Tactical Air Strike Request). JP 3-09.3 provides detailed instructions for completing DD Form 1972.
Immediate Requests
4-40. Immediate requests arise from situations that develop outside the ATO planning cycle, such as timesensitive targets or troops in contact. Because these requirements cannot be identified early on, tailored ordnance loads may not be available for specified targets. Although support for the defense cannot be
8 February 2009
FM 3-05.230
4-11
Chapter 4
forecasted, it can be planned and coordinated. Established TRPs can reduce the time required for the supporting unit to provide fires for the TACFAC. Rehearsed defensive plans by CAS and CCA assets can enhance SA and reduce talk-on time.
Troops in Contact
4-41. When an SFOD has troops in contact, the JTAC will coordinate directly with the SOTF and air support operations center (ASOC) for immediate CAS or CCA. CAS or CCA for troops in contact will normally be given priority over all other CAS and CCA missions and may be executed with SFOD members who are not JTAC-qualified (Figure 4-8).
AOC air operations center JAOC joint air operations center JSOAC joint special operations air component
Figure 4-8. Special Forces immediate close air support request channels 4-42. SFOD personnel can effectively call CAS during contact situations, but a JTAC is normally required. In circumstances where the SFOD requires CAS and no JTAC-qualified personnel are available, the SFOD commander must consider the risk and accept full responsibility for the results of the attack. The non-JTAC controller must Indicate to the aircraft (when the aircraft checks in) that he is not JTAC qualified. Provide as much of the 9-line report as possible. Pass target elevation, target location, and restrictions (at a minimum). 4-43. In return, when dealing with non-JTAC controllers, aircrews will Assist the SFOD to the greatest extent possible in order to bring fires to bear. Pull information needed to complete the 9-line briefing. Exercise vigilance with target identification, weapons effects, and friendly locations.
4-12
FM 3-05.230
8 February 2009
Mission
4-46. The SFOD plans the base defense, including the specified and implied tasks to be performed in accomplishing the objective, and the commanders intent. Understanding the key purpose of the mission allows supported and supporting units the latitude to exercise initiative and exploit opportunities. In planning CAS and CCA missions, the JFE should understand the ground commanders intent, scheme of maneuver, C2 requirements, civil aspects of the AO, and criteria for specific ROE. This understanding increases overall situational understanding by all participants and facilitates the initiative required to maximize CAS and CCA effectiveness.
Enemy
4-47. By determining key enemy characteristics, such as composition, disposition, order of battle (OB), capabilities, and likely COAs, the SFOD can begin to formulate how CAS and CCA can best be integrated. Other considerations include enemy C2 capabilities and the potential or confirmed presence of chemical or biological contamination. From this information the JTAC must anticipate the enemy ability to affect the mission and the potential influence of enemy actions on flight tactics and techniques. The potential for the enemy situation to change during the course of the mission emphasizes the importance of communications and close coordination between the aircrews and the JTAC or controller. In-flight updates on enemy activity and disposition along the flight route and in the TACFAC area may require the aircrews to alter their original plan and tactics. If the enemy is successful at disrupting communications, alternatives are planned to ensure mission accomplishment. Secure voice equipment and frequency-agile radios can overcome some effects of enemy interference.
8 February 2009
FM 3-05.230
4-13
Chapter 4
CCA. CAS and CCA for troops in contact are normally given priority over all other CAS or CCA missions and may be executed with SFOD members who are not JTAC-qualified. Available aircraft platforms may have limitations that restrict their ability to fully support a defense. Restrictive terrain may limit CAS platforms, and high altitude may restrict CCA platforms.
Time Available
4-51. Time is the critical element in coordinating events and massing fires to achieve the desired effects on the ground. All possible measures must be taken early to increase available time during execution of the defense. Fire support planners must estimate the amount of time necessary for the aircraft to execute the mission. Inadequate time management may result in reduced effectiveness and increased risk to aircrews and troops on the ground.
Civil Considerations
4-52. The impact of combat operations on noncombatants and civilian structures must be taken into account. Collateral damage estimates (CDEs) and proper weaponeering of targets must be considered during both the planning and execution of fire support operations.
Air Superiority
4-54. Air superiority permits CAS and CCA operations to function more freely and denies the same advantage to the enemy. Air superiority may range from local or temporary control of the air to control over the entire theater. JP 1-02, Department of Defense Dictionary of Military and Associated Terms, defines air superiority as that degree of dominance in the air battle of one force over another that permits the conduct of operations by the former and its related land, sea, and air forces at a given time and place without prohibitive interference by the opposing force. This involves negating enemy airborne and ground systems, including air-to-air, air-to-surface, surface-to-air, and electronic warfare (EW) systems to a level at which they are incapable of having an adverse effect on friendly force operations.
4-14
FM 3-05.230
8 February 2009
Favorable Weather
4-57. Unrestricted horizontal visibility improves CAS and CCA aircrew effectiveness regardless of aircraft type. Before CAS or CCA missions are executed, minimum weather conditions must be considered. The aviation component element commander determines the worst weather conditions in which CAS and CCA missions can be conducted based on regulations, aircraft and equipment limitations, and aircrew experience. Weather conditions worse than those considered to be the minimum will significantly degrade the ability to perform CAS and CCA because the majority of CAS and CCA aircraft do not have a true allweather capability.
Prompt Response
4-58. To be truly effective, CAS and CCA must be responsive. Streamlined request and control procedures improve responsiveness. Prompt response allows a commander to exploit planned objectives and to take advantage of unanticipated battlefield opportunities. Techniques for improving response time include Using the SOTF to decrease the distance to the AO. Placing aircraft on ground or airborne alert status. Delegating launch and diverting authority to subordinate units.
Joint Tactical Air Controller and Special Forces Operational Detachment Skill
4-59. CAS and CCA can range in complexity from very simple (such as controlling two aircraft) to complex (such as controlling several sorties of fixed- and rotary-wing aircraft and indirect fire). Aircrew and terminal controller skills have a direct influence on mission success. The SFOD commander, while planning CAS or CCA missions, must recognize the proficiency of his personnel. The SFOD should conduct CAS and CCA training as often as possible to maintain a high degree of skill.
Weaponeering
4-60. To achieve the desired level of destruction, neutralization, or suppression of enemy targets, the weapons load, arming settings, and fuse settings must be tailored for the desired results. For example, cluster and GP munitions are very effective against troops and stationary vehicles. Hardened, mobile, or pinpoint targets, however, may require specialized weapons, such as laser-guided, electro-optical (EO), or IR munitions, or aircraft with special equipment or capabilities. The requesting SFOD commander should solicit the type and quantity of ordnance that is appropriate to his needs and be informed of the ordnance load that each supporting CAS or CCA aircraft is carrying.
8 February 2009
FM 3-05.230
4-15
Chapter 4
4-16
FM 3-05.230
8 February 2009
Rendezvous point (RP). An RP is a prearranged geographic location where aircraft meet after takeoff or after exiting the target area. Egress control point (ECP). An ECP is a well-defined geographical control point outside the enemy air defense area. The ECP identifies a CAS or CCA platform egress from the target. Contact with JTAC normally ends at the ECP.
Figure 4-9. Fixed-wing airspace control measures 4-67. Although many multi-use control points apply to both fixed- and rotary-wing aircraft, there are two points that meet the unique requirements of rotary-wing attack platforms. The two points are holding areas (HAs) and BPs. 4-68. The HA is occupied while awaiting targets or missions. While in the HA, aircrews receive the CCA briefing and perform final coordination. Aircrews can receive updated target or mission information in a face-to-face brief or over the radio. After receiving the brief, aircrews move along attack routes to BPs or individual firing points. The HA should be well forward, yet provide cover and concealment from enemy observation and fires. The HA should be large enough for adequate dispersion and meet all landing zone (LZ) selection criteria. Because the HA is well forward, it may be necessary to supplement its security by
8 February 2009
FM 3-05.230
4-17
Chapter 4
providing it with a small security force. It must also be supplied with the necessary communications for coordinating a launch. The availability or use of messengers should also be considered and planned for. 4-69. BPs are maneuvering areas that contain firing points for attack helicopters. BPs should allow good cover and concealment, provide necessary maneuvering space, allow for appropriate weapons engagement zones, and be reasonably easy to identify.
Permissive Measures
4-71. Permissive measures facilitate target attacks. The three types of permissive FSCMs are as follows: Coordinated fire line (CFL). A CFL is a line beyond which conventional, indirect, surface fire support means may fire at any time within the boundaries of the establishing HQ without additional coordination. Fire support coordination line. An FSCL can be established and adjusted by the land or amphibious component commanders within their AOs in consultation with superior,
4-18
FM 3-05.230
8 February 2009
subordinate, supporting, and affected commanders. FSCLs facilitate the expeditious attack of surface targets of opportunity beyond the coordinating measure. The FSCL applies to all fires of air-, land-, and sea-based weapon systems using any type of ammunition. Forces attacking targets beyond an FSCL must inform all affected commanders in sufficient time to allow necessary reaction to avoid fratricide. Supporting elements attacking targets beyond the FSCL must ensure that the attack will not produce adverse effects on, or to the rear of, the line. Short of an FSCL, the appropriate commander controls all air-to-ground and surface-to-surface attack operations. The FSCL should follow well-defined terrain features. Free-fire area. An FFA is a specific area into which any weapon system may fire without additional coordination with the establishing HQ.
Restrictive Measures
4-72. Restrictive measures safeguard friendly forces. There are numerous types of restrictive measures, to include the following: NFAs. RFAs. Restrictive fire lines (RFLs). ACAs. No-Fire Area 4-73. An NFA is a land area designated by the appropriate commander into which fires and their effects are prohibited. There are two exceptions to this prohibition, described as follows: When establishing, HQ may approve fires temporarily within the NFA on a mission-by-mission basis. When an enemy force within the NFA engages a friendly force, the commander may engage the enemy to defend his force. Restrictive Fire Area 4-74. An RFA is an area in which specific restrictions are imposed. Fires (or the effects of fires) that exceed those restrictions will not be delivered into the area without coordination with the establishing HQ. Restrictive Fire Line 4-75. An RFL is a line established between converging friendly forces where one or both elements may be moving. The RFL prohibits fires or their effects across that line. Airspace Coordination Area 4-76. An ACA is a three-dimensional block of airspace in a target area, established by the appropriate ground commander, in which friendly aircraft are reasonably safe from friendly surface fires. The two types of ACAs are Formal. A formal ACA is established by the airspace control authority at the request of the appropriate ground commander. Formal ACAs require detailed planning. Although not always necessary, formal ACAs should be considered. The vertical and lateral limits of the ACA are designed to allow freedom of action for air and surface fire support for the greatest number of foreseeable targets. Because the supporting arms coordination center (SACC), fire support coordination center (FSCC), fire support element (FSE), or fire direction center (FDC) can determine the trajectory for a specific ground or naval surface fire support (NSFS) asset firing at a specific target, each target must be evaluated to ensure the trajectories of the rounds do not penetrate the ACA. The fire support coordinator (FSC) should consult the FDC when deciding the altitude of an ACA to determine if that altitude would allow the majority of targets to be attacked without interference or problems. Formal ACAs are promulgated in the airspace control order (ACO) or the ATO SPINS.
8 February 2009
FM 3-05.230
4-19
Chapter 4
Informal. An informal ACA can be established using separation plans and may be established by any ground commander. Aircraft and surface fires may be separated by Lateral separation. Lateral separation is effective for coordinating fires against targets that are adequately separated from flight routes to ensure aircraft protection from the effects of friendly fires. Altitude separation. Altitude separation is effective for coordinating fires when aircraft remain above or below indirect fire trajectories and their effects. Altitude and lateral separation. Altitude and lateral separation is the most restrictive technique for aircrews and may be required when aircraft must cross the firing units guntarget line. Time separation. Time separation requires the most detailed coordination and may be required when altitude restrictions from indirect fire trajectories adversely impact aircraft ordnance delivery (for example, mortar trajectory).
4-20
FM 3-05.230
8 February 2009
Chapter 5
LOGISTICS OVERVIEW
5-1. The SOTF SPTCENs provide or coordinate through the joint special operations task force (JSOTF) for SF TACFAC logistics on a unit-sustainment basis for all elements assigned or attached to their respective facilities. SF logistics planners and personnel apply their knowledge of conventional logistics operations to meet the specific TACFAC requirements generated by SF units. Logistics fundamentals apply to most SF operations. TACFAC logistics support normally includes Requisition, receipt, storage, and distribution of all classes of supply. Procurement of nonstandard supplies and items of materiel for TACFAC improvement and sustainment. TACFAC protection and security items, to include obstacles, barriers, and wire. Mortuary affairs. Production and distribution of food and potable water. Field service, supply, and repair (SSR) maintenance for all wheeled vehicles, power-generation equipment, signal equipment, diving and marine equipment, and small arms. Limited SSR for SF-peculiar equipment. Airdrop equipment rigging, supply, and repair. Force health protection (FHP). Human resources (HR) support.
8 February 2009
FM 3-05.230
5-1
Chapter 5
SUPPLY
5-3. The service detachments supply and transportation section requisitions, receives, and stores standard Class I, II, III, IV, VI, and VII supplies from the supporting supply and service company. All of these classes of supplies (except bulk Class III) are demand items. The using TACFAC submits a request through the service detachment. Field maintenance either fills the request from its existing stocks or forwards the request to the supporting unit. Field maintenance uses a combination of supply point, unit, and throughput section requisitions and receives Class VI packages the same way they requisition Class I supplies. 5-4. Bulk Class III is a scheduled item. The JSOTF logistics officer forecasts unit and TACFAC requirements through logistics channels to the theater sustainment command (TSC) or sustainment brigade based on input from the battalions. The TSC deputy chief of staff for logistics (DCSLOG) and theater Army material management command (TAMMC) develop a distribution plan to allocate fuel to subordinate units and TACFACs based on fuel availability (IAW theater OPLANs) and unit priorities. 5-5. The supply and transportation section requisitions and receives nonstandard, SF-peculiar items (such as large-capacity diesel generators) through the Army special operations forces liaison element (ALE). The ALE fills the request from the theater orin the case of certain non-DOD itemsobtains the items through the special operations command (SOC) logistics staff section (J-4). 5-6. The supply and transportation section requests, draws, and stores conventional Class V supplies from the supporting ammunition supply point (ASP). A conventional ordnance ammunition company of the TSC ammunition group operates the ASP and uses supply point distribution. Class V supply is scheduled, not demanded. Based on input from the battalions, the SFG(A) operations staff section (S-3) must determine the groups operational requirements, unit basic load (UBL), and required supply rate. The S-3 then submits the requirements through operational channels for approval and allocation by the TSC deputy chief of staff for operations (DCSOPS). DCSLOG and TAMMC allocate scarce Class V items by computing a controlled supply rate based on guidance from the Army Service component command (ASCC) DCSOPS. Once the SFG(A) commander receives the Class V allocation, the SFG(A) and battalion S-3s approve unit Class V requests before the logistics staff sections (S-4s) can fill them. 5-7. The group or battalion medical section requisitions and receives its normal Class VIII supplies from the supporting medical treatment facility of the medical deployment support command (MDSC). The medical facility uses a combination of unit and supply point distribution. Class VIII resupply is on demand. The using TACFAC submits requests to the medical supply sergeant, who forwards the request through medical channels to the medical facility. The facility either fills the request from its existing stocks or forwards the request to its supporting medical logistics (MEDLOG) unit. For bulk issue of Class VIII supplies to fill SF operational requirements, the MDSC normally authorizes direct requisitioning from the MEDLOG unit. 5-8. The service detachments mechanical maintenance section requisitions, receives, and stores Class IX supplies from supporting field maintenance in the sustainment brigade. Class IX resupply is on demand. The using TACFAC submits its request to the mechanical maintenance section. It forwards the request to field maintenance. Field maintenance fills the request from its existing stocks or forwards the request to the TAMMC. 5-9. The supply and transportation section receives and stores Class X supplies from the supporting TSC. The TSC uses a combination of unit, supply point, and throughput distribution. The using TACFAC submits its request through the base plans staff section (S-5). The S-5 forwards the request through logistics channels. 5-10. The battalion supply and transportation section obtains potable and nonpotable water from local sources using organic equipment. When water requirements exceed the local supply, the section requisitions and draws water from a water supply point set up by the supporting field maintenance supply and service company. 5-11. The battalion supply and transportation section requisitions and receives unclassified maps from the supporting field maintenance unit. Field maintenance obtains unclassified maps from the appropriate ASCC map depot. Using units and TACFACs submit their requests to the intelligence staff section (S-2),
5-2
FM 3-05.230
8 February 2009
who then consolidates them and forwards the requests through supply channels. The battalion S-2 requisitions and receives classified maps and other classified intelligence products through intelligence channels. 5-12. To meet their operational requirements during the transition to active operations and during unanticipated breaks in normal resupply operations, TACFACs maintain UBLs of Class I, II, III, IV, V, VII, and IX supply items. TACFAC commanders should review these UBLs at least annually to ensure that they adequately address current operational sustainment requirements. TACFAC commanders inspect their UBLs periodically for proper maintenance, rotation, and security. Commanders also ensure adequate spare parts and necessary equipment has been requisitioned.
FIELD SERVICES
5-13. Field services include mortuary affairs, airdrop (Figure 5-1), clothing exchange and bath, laundry, bread baking, textile and clothing renovation, and salvage. Mortuary affairs and airdrop are primary field services because they are essential to the sustainment of combat operations. All others are secondary field services.
Figure 5-1. Airdrop resupply 5-14. Whenever possible, TACFACs that sustain fatal casualties identify the human remains and place them in human-remains pouches. The SFOD then evacuates the remains to the service detachment for further evacuation to the supporting mortuary affairs collection point. If the remains are contaminated, the remains and the pouches should be so marked. When an SFOD cannot evacuate its dead, it conducts an emergency burial and reports the burial to the battalion. The battalion S-4 submits a record of interment through mortuary affairs channels. Whenever possible, a unit chaplain or the TACFAC commander conducts an appropriate service to honor the dead.
8 February 2009
FM 3-05.230
5-3
Chapter 5
5-15. The SOTFs may not have fixed facilities or civilian contractors to provide secondary field services. In this situation, the field maintenance supply and service company provides these services when the situation permits.
MAINTENANCE
5-16. The service detachments mechanical maintenance section performs limited consolidated unit-level maintenance of wheeled vehicles and power-generation equipment. It performs vehicle recovery (Figure 5-2). The signal detachments electronic maintenance section performs field maintenance of signal equipment. It also performs limited sustainment maintenance of SF-peculiar signal equipment. Unit armorers perform field maintenance of small arms.
Figure 5-2. Vehicle recovery 5-17. Required maintenance on an item of equipment may exceed TACFAC capabilities. In such instances, the mechanical maintenance section, electronics maintenance section, or TACFAC evacuates the equipment to the supporting field maintenance company or requests on-site repair by a mobile maintenance support team from that company. 5-18. There are exceptions to these procedures. The rigger air delivery section, for example, evacuates unserviceable airdrop equipment to the TSC airdrop equipment repair and supply company. Similarly, the medical section evacuates unserviceable medical equipment to the supporting medical treatment facility or MEDLOG unit. 5-19. For those items of SF-peculiar equipment the Army maintenance system cannot repair, the SFG(A) must rely on the group support battalion (GSB) or on civilian specialists and TACFAC personnel who have attended civilian maintenance training. Such equipment may require evacuation to the continental United States (CONUS) for repair at the manufacturer or other selected facility.
5-4
FM 3-05.230
8 February 2009
TRANSPORTATION
5-20. The primary concern of the service detachment commander is transportation operations (air, motor, rail, and water). The supply and transportation section provides the trucks to support supply point distribution and other normal logistics support activities. It does not, however, have dedicated drivers for these trucks. The TACFAC commander may organize a provisional transportation section by assigning drivers to these trucks. The TSC transportation section may attach appropriate motor and water transportation assets to the support company for atypical logistics support operations. Otherwise, transportation units support unusual transportation requirements on a mission-priority basis with their sustainment assets. The unit S-4 coordinates for transportation support through the regional transportation management office (TMO) of the theater Army movement control agency (TAMCA). When the same TMO services the SOTF, the TMO may require the group S-4 to consolidate support requests.
SUPPORT RELATIONSHIPS
5-23. Support relationships must be developed and nurtured before and during exercises, mobile training teams (MTTs), joint combined exchange training (JCET), and planning conferences. Support relationships identified in the theater support plan are a basis for continued support relationships between the JSOTF and the ASCC elements providing its support package. The support package should be provisionally organized as a composite support battalion or company.
SUPPLY
5-24. Normal basic loads are inadequate for TACFAC operations in an undeveloped theater. SF units deploying into an undeveloped theater should recalculate requirements based on the TACFAC mission. For example, an SFODA may deploy with 30 days of supply (15-day ordership time, 10-day operating level, 5-day safety level). Because this quantity exceeds the SFG(A) capacity to move and store supplies, the group and battalion S-4s normally divide the loads into accompanying supplies and preplanned follow-on supplies. Accompanying supplies normally are limited to the units basic and prescribed loads, plus additional Class I, III, and V supplies critical to the operation. The group and battalion S-3s must include accompanying supplies in all predeployment planning. 5-25. Supply procedures vary in an undeveloped theater. The JSOTF can rely on local contract support for fresh Class I supplies and DFAC operation. The SFODA in a TACFAC routinely purchases Class II, III, IV, and VI supplies locally or from third-party contractors. The SFODA normally receives Class V and IX supplies through the standard U.S. system. The TACFAC unit stocks low-density, high-dollar repair parts not normally authorized at unit-maintenance level. Class VII supplies may include a combination of military and commercial equipment from U.S. and foreign sources, particularly large-capacity diesel
8 February 2009
FM 3-05.230
5-5
Chapter 5
generators. Replacement of equipment depends on the duration of the operations, theater sustainment and maintenance repair capabilities, loss rates, and the availability of operational readiness float or PWRMS. The SOTF and TACFAC contracts or procures water locally.
FIELD SERVICES
5-26. The JSOTF normally receives field services through the GSB until the TSC establishes these capabilities. The SFG(A) may contract for various housekeeping services, including laundry services. If laundry services are unavailable, the group S-4 will arrange for clothing exchange through the GSB.
MAINTENANCE
5-27. Preventative maintenance checks and services (PMCS) are critical in tropical, desert, or arctic environments that typically exist in undeveloped theaters. The frequency of periodic services often increases in these regions. Repair facilities in an undeveloped theater are often unreliable and unavailable. The JSOTF commander should review the modified table of organization and equipment (MTOE) to determine the items he needs to meet increased maintenance demands caused by operations in an undeveloped theater. For example, the commander may need repair parts, special tools, or diagnostic equipment for testing commercial off-the-shelf (COTS) diesel generators. The TACFAC unit should identify maintenance support in their SOR before deployment. The TACFAC commander also may contract for HN maintenance support of its equipment.
TRANSPORTATION
5-28. Because undeveloped theaters have poor LOCs, Army aviation assets deploy early (whenever possible) to support SF logistics operations. These aviation assets must include an adequate maintenance support package for autonomous, unilateral, and continuous operations. The battalion commander reviews HN (or any other) lift assets to meet additional unresourced transportation requirements. Regardless of the source of aviation assets used to support a JSOTF, this support must be dedicated for administrative and logistical sustainment requirements in both mature and undeveloped theaters.
5-6
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
5-7
Chapter 5
Caches. A cache is an alternative form of resupply. SFODAs can stockpile materiel within the JSOA to support future operations. They also can use caches emplaced by other units on previous operations. Using other units caches from previous operations must be coordinated and approved by the JSOA commander. 5-36. The SOTF S-4 requests the supplies and equipment for the SFODA missions through the GSB to the TSC. Resupply missions are normally preplanned by the SFODAs while in isolation. An SFODA at an isolated TACFAC may be required to obtain supplies from a conventional force due to a challenging geographic location. SF leaders should strive to establish a good working relationship with nearby conventional units. 5-37. The GCC establishes the command relationship involving ARSOF in the theater. However, the theater ASCC has Title 10, United States Code (10 USC) responsibilityregardless of operational control (OPCON) arrangements within the combatant commandto provide administration and support to deployed ARSOF. Also, when directed by the GCC, the ASCC will support and sustain designated SOF of other U.S. Services and other multinational SOF. 5-38. Special operations support command (SOSCOM) HQ provides C2 to its organic elements to accomplish planning and coordinate health and signal support to ARSOF units supporting the combatant commanders (CCDRs). When directed, SOSCOM deploys its battalions in direct support of deployed ARSOF, such as SF TACFACs. 5-39. The special operations theater support element (SOTSE) is a staff planning, coordinating, and facilitating element. It serves as the ARSOF liaison to the ASCC for matters pertaining to logistics and medical needs, and provides ARSOF advocacy within the ASCC. The SOTSE coordinates requirements identified by ARSOF and facilitates the interface of ARSOF organizational logistics functions with the services provided by the ASCC. USASOC attaches the SOTSE to the ASCC HQ for duty within the ASCC logistic staff. The SOTSE coordinates closely with the supported theater special operations command (TSOC) and ARSOF during the deliberate planning process. The SOTSE identifies support requirements, integrates ARSOF sustainment requirements into the ASCC support plan, and ensures timely provision of that support. 5-40. A critical source of information that the ASCC needs for coordination and facilitation functions is the SOR provided by the SF units. The SOC J-4 and other logistics staffs have to be proactive and must be included in the mission-planning process. The logistics planners must anticipate operational unit requirements at all stages of the mission. Ideally, the J-4 uses the ASCC OPLAN in preparing the concept plan (CONPLAN) for inclusion in the mission order. This approach allows theater support elements time to review required support before the SOF mission unit submits its mission-tailored SOR. This review is especially critical in crisis action planning (CAP) and short-notice mission changes. The SOR (Figure 5-3, pages 5-9 through 5-15) is a living document that requires periodic reevaluation and updating as the TACFAC requirements change. Determination of requirements begins with the receipt of the mission. 5-41. There are 10 established numbered classes of supply and one miscellaneous category of supply. All classes of supply are directly related to support and supply the TACFAC construction and sustainment. Only two categories of supplyClasses VI and VIIImay not directly apply. The classes of supply (with examples) are as follows: Class I. Class I supplies are subsistence items and gratuitous health and welfare articles, such as meals, ready to eat (MREs) and fresh fruit and vegetables. Class II. Class II supplies include equipment authorized and allowed to the unit, such as clothing, personal tools, and administrative supplies. Class III. Class III supplies are either bulk or packaged POL. Bulk POL include gasoline and multifuels. Packaged POL include coolant, de-icer, and antifreeze compounds. Class IV. Class IV supplies are construction and barrier materials, to include all fortifications, lumber, sandbags, and barbed wire. Class V. Class V supplies are ammunition of all types, explosives, mines, fuzes, detonators, pyrotechnics, and chemical and nuclear munitions.
5-8
FM 3-05.230
8 February 2009
Class VI. Class VI supplies are personal demand items, usually purchased at the post exchange (PX), to include soap, toothpaste, alcohol, and cigarettes. This supply class is usually requisitioned and distributed with Class I items. Class VII. Class VII supplies are major end items, including aircraft, tanks, major weapon systems, and vehicles. Class VIII. Class VIII supplies are medical items, to include medicine, equipment, and repair parts peculiar to medical equipment. The two subclasses of this Class VIII supplies are Class VIIIa, which includes medical consumable supplies, not including blood or blood products. Class VIIIb, which includes blood and blood products, to include whole blood and blood plasma. Class IX. Class IX supplies are repair parts and components, to include assemblies and subassemblies (whether they are repairable or not), required for maintenance support of all equipment, such as spark plugs and batteries. Class X. Class X supplies are materials required to support nonmilitary programs which are not included in Classes I through IX, such as agriculture and economic development. Miscellaneous. The miscellaneous category of supplies includes water, salvage, and captured materiel. (CLASSIFICATION)
I. II. REFERENCES. GENERAL. A. B. D. E. F. Unit to be supported. When support is required. Unit points of contact (POCs). Number of personnel to be supported. Unit identification (ID) code.
G. Force activity designator. H. Funding. Special funding for the operation and how to access, if applicable, and fund flow for obtaining supplies, including project code. III. CONCEPT OF OPERATIONS. A. B. Mission. State the general mission of the unit, command, or operation. Desired results. Provide a concise statement of the desired results of the support being requested.
IV. ASSUMPTIONS. Give the conditions that are likely or must exist for this support to be required. Relate the assumptions to specific requirements, as required or appropriate. V. CONSTRAINTS. Define situation that, if experienced, will degrade operations. Give conditions to specific requirements identified, as required or appropriate.
VI. COMMAND, CONTROL, AND COORDINATION. Describe functional C2 of the unit. VII. SUPPLIES. A. Class I. 1. DFAC requirements.
8 February 2009
FM 3-05.230
5-9
Chapter 5
(CLASSIFICATION)
2. 3. Augmentation. Food storage facilities. Determine which of the following food storage facilities are required to contain a 30-day supply of rations. a. b. c. 4. 5. Dry space (in cubic feet). Chill space (in cubic feet). Freezer space (in cubic feet).
Mermites. Determine requirements for mermites. List how many and how often they are required. Meal payment. Determine how individuals will pay for their meals. a. b. c. Cash collection. Payroll deduction. Meal cards.
6. 7.
DFAC hours. Determine if a 24-hour DFAC will be required. Equipment augmentation. Determine requirements for equipment augmentation to dining facility. List the equipment by nomenclature, National Stock Number (NSN), and quantity. Combat rations. Estimate the number of combat rations required by the number of meals required for 30-day sustainment. a. b. c. d. Meal, combat, individual. MRE. Long-range reconnaissance patrol (LRRP) rations. Other (specify).
8.
9. B.
Water requirements.
10. Other (specify). Class II. 1. 2. 3. 4. 5. 6. 7. 8. C. 1. Self-service. List essential self-service supply center items required for 30-day sustainment. CBRN equipment. List requirements for CBRN consumables and nonconsumables needed to provide two complete issues of CBRN equipment following a CBRN attack. Sustainment. List other Class II items required for sustainment, such as items listed in Common Table of Allowance (CTA) 50-900, Clothing and Individual Equipment. Reproduction equipment. Determine what reproduction equipment is required. List the equipment and the number of copies needed for 30-day sustainment. Special equipment. List any special Class II equipment required over and above that already authorized and on hand. List by nomenclature, NSN, and quantity. Clothing sales. Determine requirements for clothing sales facility. Geospatial products (maps, digital data). State the requirement for each product type by quantity and area coverage. Other (specify). POL. Determine POL, including base-support functions, for a 30-day sustainment. List item by type and quantity. a. b. Motor gasoline (specify regular or super). Diesel fuel (specify DF1 or DF2).
Class III.
5-10
FM 3-05.230
8 February 2009
(CLASSIFICATION)
c. d. e. f. g. 2. 3. Aviation gasoline (specify JP4 or JP5). Oil (bulk). Grease. Coolants. Packaged POL or other lubricants.
Tankers and dispensers. Identify requirements for tankers or dispensers in addition to organic capabilities. List by type, capacity, and quantity. Planning factors. Determine if the planning factors used to identify POL requirements were factors other than those in the United States Combined Arms Support Command (CASCOM) database or operational logistics (OPLOG) planner. If so, specify. Other (specify). Determine requirements for building and barrier materials. Other (specify). Additional Class V requirements. Determine Class V requirements over and above those in the UBL. List by DOD identification code, nomenclature, and quantity. Planning factors. Determine which planning factor was used to forecast Class V consumption rates. Other (specify).
4. D. 1. 2. E. 1. 2. 3. F.
Class V.
Class VI. 1. 2. 3. Additional equipment. Determine requirements for additional items of equipment, such as trucks and generators. List by nomenclature, NSN, and quantity. Maintenance augmentation. Determine the requirement for maintenance augmentation to support the equipment listed above. Other (specify). Determine requirements for Class VIII supplies by nomenclature, NSN, quantities, and special requirements associated with a particular item, such as refrigeration. Determine schedule of resupply required. Determine whether resupply will be prepackaged standard line items. Identify Class VIII supplies peculiar to the AO and whether they are readily available or must be specifically acquired (for example, antivenins). Determine availability and reliability of HN Class VIII for emergency purposes. Other (specify). Mandatory parts list. Determine if there is a mandatory parts list to support the equipment. Prescribed load list (PLL). Determine if the PLL includes repair parts to support all assigned equipment. Equipment density list. Develop an equipment density list to provide to HN or other supporting agency, as required.
G. Class VII.
H.
Class VIII. 1. 2. 3. 4. 5. 6.
I.
Class IX. 1. 2. 3.
8 February 2009
FM 3-05.230
5-11
Chapter 5
(CLASSIFICATION)
4. 5. J. 1. 2. 3. 4. K. 1. Leased vehicles and equipment. Determine Class IX requirements for leased vehicles and equipment, if necessary. Other (specify). Determine Class X requirements. Type. Quantity. Other (specify). Emergency resupply. Identify requirements for emergency resupply push packages. (Specify by NSN, nomenclature, and quantity. Attach as separate enclosure for each type of push package.) Maps and photographs. Identify requirements for maps and imagery. Other (specify).
Class X.
2. 3.
VIII. SERVICES. A. B. Field services. Engineering services. 1. Equipment power compatibility. Determine the following if supplied with commercial power at the wartime site. a. b. c. 2. 3. 4. 5. C. 1. 2. 3. Equipment is compatible. Plug adapters are required. List what voltage and how many are needed. Transformers are required. List what voltage and how many are needed.
Water requirements. Identify daily requirements for potable water. Pest control requirements. Determine requirements for rodent and insect control assistance. Heavy-equipment requirements. Other (specify). Linen requirements. List by type and quantity. Laundry services requirements. Other services identification. Determine if other services are needed.
Other services.
IX. MAINTENANCE. A. B. X. Direct support (DS) and general support (GS) maintenance. Identify requirements for DS and GS maintenance. Other maintenance equipment. List commercial and nonstandard equipment that must be maintained.
TRANSPORTATION. A. Air transportation. 1. 2. Unit load plans. Enclose unit load plans. Administrative aircraft. Determine requirements. Specify type and number of hours per week.
5-12
FM 3-05.230
8 February 2009
(CLASSIFICATION)
3. 4. Equipment and personnel requirements. Determine requirements for additional materiel handling equipment and personnel. Cargo storage facilities. Determine requirements for cargo storage facilities. Specify by the number of square feet required for the following: a. b. 5. a. b. B. Covered secure storage. Outdoor secure storage. C-130s. Other (specify).
Airfield requirements.
Water transportation. Determine water transportation needs (specify). 1. 2. Tactical vehicles (with or without communications equipment). Other special-purpose vehicles.
XI. FACILITIES. A. B. Maintenance facilities. Identify vehicle, communication, weapons, and aviation maintenance area (covered) requirements (list in square feet). Billeting facilities. 1. Billet number and size requirements. a. b. c. d. 2. 1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 4. 5. 6. 7. 8. 9. Officers. Senior enlisted. Enlisted. Females.
Tentage. Hospital beds. Treatment rooms. Dental treatment rooms. Laboratory. X-ray room. Pharmacy. Other (specify). OPCEN. SPTCEN. SIGCEN. ISOFAC. DFAC. Dispensary. Reception and palletizing. Parachute rigging and drying. Administration.
8 February 2009
FM 3-05.230
5-13
Chapter 5
(CLASSIFICATION)
10. Unexploded ordnance (UXO). 11. Ammunition storage. 12. Fuel storage and refueling. 13. MWR (television room, telephone, Internet, weight room). 14. HN meeting room and classroom. 15. Gym. 16. Antenna fields. 17. Ranges (list type weapons requiring ranges). 18. Drop zones (DZs). 19. Secure facilities (for storing, receiving, and transmitting classified messages and documents). 20. Other (specify). XII. PERSONNEL SERVICES. A. B. Casualty reporting. Determine how casualty-reporting system works. Administrative services. 1. 2. Reproduction and word processing. Determine reproduction and word-processing requirements. Postal. Identify postal requirements.
C. Finance. Determine finance support requirements. Identify what is required (pay and allotments). D. Religious support. Identify religious support requirements. E. F. Legal. Determine requirements for staff judge advocate (SJA) support. Other (specify).
XIII. MEDICAL. A. B. C. E. F. Patient care. Determine legal and policy constraints on providing medical care to indigenous personnel. CASEVAC. Determine aeromedical and overland evacuation requirements. MEDLOG. Preventive medicine services. Vaccination and prophylactic medication requirements. Veterinary services.
XIV. SIGNAL. A. Terminal equipment and access. Determine requirements for the following: 1. 2. 3. 4. 5. Supplemental terminal equipment. Specify by type and quantity. Access to HN communication telephone system. Specify need, such as number of lines. Access to North Atlantic Treaty Organization (NATO) telegraph network. Access to HN military teletype system. Access to automatic secure voice communications.
5-14
FM 3-05.230
8 February 2009
(CLASSIFICATION)
6. 7. 8. B. Access to NATO secure voice network. Access to Automatic Digital Network (AUTODIN). Other (specify).
Transmit and receive sites. Determine the number of transmit and receive sites to be set up and how much area will be needed.
XV. SECURITY. A. B. D. MP. Determine MP requirements. CI. Determine if CI is required. Other (specify).
8 February 2009
FM 3-05.230
5-15
Chapter 6
The SF field ordering officer (FOO) and paying agent (PA) officer must address competing needs, requirements (such as weapons systems, C2 systems, security, and logistics), and their demands on resources. SF unit resources include time, funds, personnel, existing contractor support, existing equipment and material, and other items and assets used to accomplish the mission. Any shortage of resources normally results in contracting having to meet the mission and fulfill necessary requirements. Each requirement has an associated costeither in money or resourceswhich must be included in the budget or operations plan. When accurate preplanning is conducted, the FOO and PA have a budget to work with and can purchase necessary supplies or services through contracting. The needs dictated by a requirement are theater-unique and change often.
FUNDING PRINCIPLES
6-1. In the United States Central Command (USCENTCOM) area of responsibility (AOR), the Army is in charge of contracting through the Assistant Secretary of the Army for Acquisition, Logistics, and Technology (ASAALT). The steps in the acquisition process are as follows: The unit-generated requirement is documented using the following: Statement of work (SOW) and an independent government cost estimate (IGCE). DA Form 3953 (Purchase Request and Commitment [PR&C]). The requirements package is validated by the joint acquisition review board (JARB) and approved by commander, joint task force (CJTF). The PR&C is certified by the resource manager for funding and commitment. The PR&C and SOW are sent to contracting for execution and obligation. The goods or services are delivered to the customer. The vendor is paid by finance personnel. 6-2. The formal requirements for contracting relate primarily to the dollar limit of the acquisition. As the value of the goods or services increases, so do the required procedures. For example, acquisitions under $2,500 are generally accomplished by a unit FOO. Higher command approval is necessary when the amount exceeds $200,000. 6-3. There are reasons for the disparity in the processes. Some of these reasons are obvious, whereas other reasons are more obscure. The most obvious reason for the differences is that money always is in short supply when positioned against requirements. On the obscure side, fiscal laws governing disbursement carry harsh penalties for violations, including criminal penalties and loss of pay. Therefore, the requirements process has its own checks and balances that SF Soldiers must understand and follow. 6-4. Once the command has validated a high-dollar-value proceduretypically goods or services exceeding $200,000there are three staff offices that work together and assist the unit in fulfilling their contracting requirements. These offices, commonly referred to as the fiscal triad, are made up of the Comptroller, who acquires, controls, and certifies funds IAW fiscal law.
8 February 2009
FM 3-05.230
6-1
Chapter 6
Finance unit, who makes the payment. Contracting officer, who receives requirements and finishes the process of acquiring goods and services.
CONTRACTING PROCESS
6-5. There are three significant steps in the contracting process that SF Soldiers must understand. The three steps are Identify and justify the requirements. Identify fiscal constraints and funding sources. Use the proper contracting authority and methods. 6-6. The SF unit must identify requirements to reduce the threat risk to the TACFAC. Potential requirements include items or services that make the TACFAC more secure but exceed on-hand resources. Crucial products during this process include the commanders justification memorandum, PR&C, SOW, and the IGCE. Strategic players include the FOO, PA officer, unit commander, installation property book officer (IPBO), JARB, and the Commander, Special Operations Command (COMSOC) (or his representative), for approval of PR&Cs.
6-2
FM 3-05.230
8 February 2009
Provides SF commanders a vehicle to identify requirements to the chain of command. Prioritizes resource requirements for request of Combating Terrorism Readiness Initiative Fund (CTRIF) support. 6-11. For the requirements review and contracting, the main document for identifying, approving, funding, and tracking a requirement within the Army is the PR&C. However, if manufactured supplies or services are needed, an SOW and an IGCE also are required. After the PR&C is drafted, the SF unit prepares the justification documentation, or JARB package. When justifying requirements, the following questions must be addressed: Why is the item or service needed? Why should the request receive priority? 6-12. The requirement may reduce the risk of death or injury; however, it must be explained sufficiently to pass the scrutiny of decision makers outside the SF unit. Whether or not a requirement is approved depends upon the threat, location, expected incident response, consequence-management actions (and their results), expected losses of personnel and equipment, and risk to the mission. 6-13. Analysis is often required to justify requirements; at times, this analysis may be intense. Analysis may include results from Antiterrorism Plannera tool in the Joint Antiterrorism Program Managers Guide (JAT Guide)showing predicted blast damage to structures and personnel. The analysis may include the blast radius from a rocket or mortar, to include expected injuries. Multiple tools are available for predicting weapons effects on structures and personnel. Regardless of the technique, the SF unit must write a clear and convincing justification and present the requirements for approval. Verbal and written communication skills are crucial during this process. 6-14. There is a timeline for seeking funding. In 2004, during Operation IRAQI FREEDOM (OIF), the acquisition approval process followed a monthly cycle. Joint task force (JTF) staff officers held weekly meetings to consider and recommend disposition on pending theater requirements. The framework for these meetings was the JARB and the facilities utilization and support board (FUSB). The JARB and the FUSB were made up of intermediate representatives from all JTF-level staff sections. The JARB focused on all requirements exceeding $200,000. The FUSB was an engineer-oriented board that mandated uniform basing requirements across theater for the JARB to apply. Both of these boards were responsible for vetting requirements so the chief logistician and chief engineer could prioritize and approve requirements appropriately. 6-15. The JARB and FUSB were the final steps in the process. In the Iraq acquisition cycle, staff officers from the JARB and the FUSB would provide monthly briefings for the deputy commanding generals (DCGs) for support at each division regarding their duties and current actions. They would receive feedback about pending requirements. These meetings came to be known as the executive logistics review boards (ELRBs). After appropriate coordination, staff principles briefed senior leaders, who issued strategic guidance and provided priorities on theater-wide issues. 6-16. Because acquisitions exceeding $200,000 do not usually go to the comptroller or contracting without a JARB recommendation and an approval signature on the PR&C, SF Soldiers must understand how to develop an effective JARB package. Every JARB package must be properly staffed at the requesting unit and direct reporting unit before being submitted to the JARB.
Justification Memorandum
6-17. A request must have a justification memorandum that states clearly what the requirement is and what is requested to meet the requirement. The memorandum should describe how the requirement was determined and what options were considered to address the requirement. Units must address second-order and third-order effects of the request. For example, an SF unit submitting a request for trailers should also consider furniture, computers, and power hookups for the trailers. All items having to do with the trailer request should be included in a single request. Finally, the request must be signed by the appropriate level commander.
8 February 2009
FM 3-05.230
6-3
Chapter 6
Analysis
6-18. The analysis must support the requirement. For example, if an SF unit requests large-capacity, COTS diesel generators, the unit must describe the MTOE and other COTS diesel generators assigned to the unit, how they are being used, and why the number or type of COTS diesel generators cannot meet the units mission requirements.
Staffing
6-19. As the SF units request is staffed through the chain of command, key personnel at each command level are provided the visibility of a much larger pool of resources. This provides an opportunity to fill the request internally or through other viable military options.
Funding Documentation
6-20. There are basically four types of funding documents that can be used to allocate funds. Determining which type of funding document is appropriate for a requirement may be difficult. The supporting resource management office and contracting personnel can help the SF unit determine which document is appropriate and how the document should be completed. The four basic funding documents are the PR&C, the military interdepartmental purchase request (MIPR), SOW, and IGCE. Purchase Request and Commitment 6-21. The PR&C is used to buy something through local purchase or a new contract. For example, if the SF unit wants to lease a nontactical vehicle (NTV), a PR&C is used as the obligation document because it is a new purchase from a commercial source. The PR&C must list what the unit is trying to purchase and the cost of the purchase. Military Interdepartmental Purchase Request 6-22. The MIPR is used to purchase something from a contract that already exists somewhere else in the DOD. For example, if an Army agency already has a contract in place for technical support, and the SF unit needs the same type support for the unit, funds are requested using a MIPR and allocated to the Army contracting agency that owns the contract. The contracting agency then makes the purchase under its contract. Statement of Work 6-23. The SOW is used when trying to hire contractor support or labor. The SOW specifies the tasks to be performed, the standard to which the tasks must be performed, and what the SF unit (as the government sponsor) is going to provide. Without this information, contractors are unable to bid properly for the contract. Although writing a SOW normally is not a part of military training, nobody can define the requirement as well as the unit that needs the service or product. The most important thing for SF Soldiers to remember is that the supporting contracting personnel can provide assistance. Independent Government Cost Estimate 6-24. The IGCE is the dollar-figure that the requester thinks is a fair and reasonable price for the product or service provided. SF units should attain estimates from a number of contractors to determine the going price. An average of the figures provided should be included in the package as part of the USG estimate. Local contracting personnel can provide additional guidelines for an SF unit developing an IGCE.
6-4
FM 3-05.230
8 February 2009
be spent. More than any other area of law, SF commanders should expect and demand legal advice concerning fiscal law. This assistance is required by 10 USC, Sections 3037, 5148, 5046, and 8037.
Fiscal Constraints
6-26. Arguably the greatest challenge to a commanders career lies in his ability to comply with fiscal limitations. It is very important that SF leaders understand that fiscal law operates like no other form of law. 6-27. When seeking financial counsel most commanders ask, Does anything prohibit me from doing this? In the context of fiscal law, this is the wrong question to ask. The question that commanders should be asking is, Are there any laws that authorize me to spend this money, in this way, and at the time I want to do this project? This properly worded question addresses the three most important aspects of fiscal law: purpose, time, and amount. Money appropriated by Congress is never indefinite. Appropriated funds are designated for a certain purpose, for a limited period of time, and in a limited sum. 6-28. There are two primary types of appropriated monies immediately available to a CJTF during contingency operations: contingency operations money and humanitarian assistance money. Contingency operations money is a form of operations and maintenance (O&M) money that is appropriated for missionessential operations in a particular contingency theater. Currently, in most taskers, the bulk of humanitarian assistance money is found in the commanders emergency response program (CERP). Proper missionrelated expenses are those services or supplies needed to perform the mission or to support personnel performing the mission, and include the following: Services: Cleaning services. DFAC services. Latrine services. Utility services. Power-generation services. Air-conditioning services. Tent services (to include set up, take down, and maintenance). Trash services. Supplies: Barriers. Concertina wire. Lumber. Concrete. Gravel (when used for maintenance and repair). Batteries. Radios. Cellular telephones (however, air time is considered a service). Generators. Tents. Paint. Tools. Spare parts. Cots. Furniture. Air-conditioning units (when installed as an integral part of real property). Medical supplies. Oil. Computers.
8 February 2009
FM 3-05.230
6-5
Chapter 6
6-29. Humanitarian assistance money in the CERP, unlike contingency operations money, can be used only by the CJTF in OIF to fund certain high-impact, high-visibility projects that benefit the HN people. SF units will find that contingency operations money funds most operations. Contingency operations money, however, carries with it the greatest restraints and pitfalls. 6-30. The SF units servicing SJA should be familiar with the types of money available and the purposes for which they can be used. The SJA should help ensure that the project is appropriately classified and that the proper rules are applied. The fiscal law questionnaire provided in Figure 6-1, pages 6-6 and 6-7, is designed to help SF Soldiers determine the appropriate classification and rules. The questionnaire highlights common issues, such as the $750,000 limitation on the use of O&M money for construction ($1.5 million for a requirement needed for life, health, or safety), the $3 million limit on repair, and the $250,000 limit on the purchase of individual items of supply. The questionnaire also identifies other concerns, such as items that are centrally managed (as with high-mobility multipurpose wheeled vehicles [HMMWVs] and Kevlar helmets) or projects or systems (such as equipment necessary for the operation of a computer network) that have been split apart to stay within applicable thresholds. The answers to the questions posed in the questionnaire help identify if Office of Military Affairs (OMA) or contingency operations money can be used, or whether other types of money (such as military construction [MILCON] or other procurementArmy [OPA]) funds must be obtained.
General Information
What is to be acquired (for example, equipment, supplies, services, or construction)? Who will supply the product or service (for example, private contractor, DA, another DOD agency, or a non-DOD agency)? What legal process will be used to acquire the service, supplies, or equipment (for example, existing contract, new contract, Economy Act order, project order, General Services Administration [GSA] schedule, supply requisition, or logistics civil augmentation program [LOGCAP])? What contracting office or agency will process the acquisition? What kind of money will be spent (for example, Fiscal Year [FY] 2008 O&M)?
6-6
FM 3-05.230
8 February 2009
Services
Describe all the services that the contractor will supply. Attach a copy of the relevant portions of the contract (if already in place) or a copy of the SOW. If funds are approved, when will funds be obligated? When will the services begin and end? If the services also involve acquisition of supplies or equipment, what estimated percentage of the total cost may be attributable to supplies and/or equipment? Describe why the services are nonpersonal services (contract employees are not supervised by government employees, are responsible for producing a product or result unrelated to how it is produced, and do not have an employer-employee relationship with the Army). The Federal Acquisition Regulation (FAR), Part 37, provides additional information. Describe why the services do not involve inherently governmental functions, such as supervising Soldiers, making policy decisions, or gathering intelligence. FAR, Part 7.5, provides additional information. Does the total cost include an estimated amount for increased costs when contract employees do not qualify as technical experts under the status-of-forces agreement (SOFA), or is there a clause in the contract shifting this burden to the contractor?
8 February 2009
FM 3-05.230
6-7
Chapter 6
Funding Sources
6-31. Funded costs are costs that apply toward fiscal limitations and count against the thresholds. Examples of funded costs include Materials, supplies, and services applicable to the project. Transportation costs for materials, supplies, and unit equipment. Installed capital equipment. Civilian labor costs. Overhead and support costs (for example, leasing and storing of equipment). Supervision, inspection, and overhead costs charged when the United States Army Corps of Engineers (USACE), the Naval Facilities Engineering Command, or the USAF serves as the design or construction agent. Travel and per diem costs for military and civilian personnel. O&M costs for government-owned equipment (for example, fuel and repair parts). Demolition and site-preparation costs. 6-32. Unfunded costs are costs that do not apply toward the fiscal limitations or count against thresholds. These costs are chargeable to appropriations other than those available to fund the project and are not reimbursed by appropriations available to fund the project. Examples of unfunded costs include Military and civilian prisoner labor. Depreciation of government-owned equipment. Materials, supplies, and equipment obtained for the project on a nonreimbursable basis as excess distributions from another Service or USG agency. Licenses, permits, and other fees chargeable under State or local statutes. SOFAs. Unfunded civilian fringe benefits. Contract or in-house planning and design costs.
6-8
FM 3-05.230
8 February 2009
Gifts from private parties. Donated labor and material contributed to the military construction project. Note: Fiscal limitations do not count against repair and maintenance work, IAW Department of the Army Pamphlet (DA PAM) 420-11, Project Definition and Work Classification. The current limitation for these projects is $3 million. Projects which exceed this figure must be approved by Headquarters, Department of the Army (HQDA).
Operations and Maintenance 6-33. In their most basic form, O&M funds (to include contingency operations money) are used to conduct predeployment, deployment, and redeployment operations. These funds may be used to purchase fuel, barriers, forklifts, bulldozers, and sensors for early warning equipment. They also may be used to pay utility bills and hire custodial services. Generally, these funds can be used to make the SF TACFAC more secure. Services are authorized to use annual O&M funds for construction projects costing less than $750,000 ($1.5 million to correct a life-threatening condition or for new construction, and $3 million for maintenance and repair of existing facilities). This is a peacetime provision, applicable during contingencies and emergencies; however, a designation of a condition as life-threatening generally is considered a safety issue instead of a contingency operation emergency. During combat or designated contingency operations, O&M funds may be used to fund construction projects exceeding these thresholds under certain circumstances; however, the commander must consult with the SJA before making a determination to use O&M funds. Military Construction 6-34. MILCON funds are obtained through a formal process using a DD Form 1391 and must be approved by Congress under applicable procedures. These funds are used to prepare the ground for construction; purchase bricks, mortar, concrete, and other construction materials; and pay construction labor, crane rental, and other expenses related to the construction of buildings, locks, dams, and roadways. Additionally, for the SF TACFAC, these funds may be used to build major buildings and structures, including concrete buildings, complex entry-control points, and a number of other phased projects. Combating Terrorism Readiness Initiative Fund 6-35. The purpose of the CTRIF is to fund emergency (and emergent) high-priority combating terrorism (CbT) requirements in the year of execution. The funds provide a means for CCDRs to react to unforeseen requirements from changes in a terrorist threat, threat levels, or protective doctrine and standards. These funds also may be used by CCDRs to address unanticipated requirements identified during vulnerability assessments, tactical operations, and antiterrorism exercises. The CTRIF can be used to fund maintenance costs for CTRIFfunded items during the year of purchase (and the subsequent year, but only as a stop-gap measure). This allowance gives Services adequate time to program lifecycle costs if maintenance funds are not programmed and provided from the parent Service. CTRIF funds are not intended to subsidize ongoing projects, supplement budget shortfalls, or support routine activitiesall of which are Service responsibilities. Unfunded Requirements 6-36. Unfunded requirements (UFRs) are the needs for which there are no funds or insufficient funds during the current and following FYs. SF units should use the Planning, Programming, Budgeting, and Execution (PPBE) process to identify and justify requests to fulfill requirements. This is a long process compared to most activitiesrequested funds that are approved by higher HQ will not arrive for at least 2 years. 6-37. UFRs should be used to request funds for equipment and construction that are not available through O&M, CTRIF, or other local and Service funds. The servicing budget, program control, comptroller, or resource management office can help to identify deadlines and data-request formats.
8 February 2009
FM 3-05.230
6-9
Chapter 6
Combatant Commanders Initiative Fund 6-38. The primary focus of the Combatant Commanders Initiative Fund (CCIF) is to support unforeseen contingency requirements critical to combatant command joint warfighting readiness and national security interests. The strongest candidates for approval are initiatives that support combatant command activities and functions, enhance interoperability, and yield a high benefit at a low cost. Protection of a TACFAC is a strong candidate because of its high benefit, low cost, and its support of combatant command activities and functions. 6-39. The CCIFs are not intended to subsidize ongoing projects, supplement budgetary shortfalls, or support expenses that normally are the responsibility of the parent Service. Initiatives considered by the Chairman of the Joint Chiefs of Staff (CJCS) in any FY are not eligible for resubmission or follow-on funding in subsequent FYs. Because all funds are in the O&M appropriation, all funding provided for approved projects must be obligated before the end of the FY for bona fide needs of that FY. Combatant command projects must be nominated for consideration by the CCDR or deputy CCDR. The CJCS is the final approval authority for CCIF requests. Chairman of the Joint Chiefs of Staff Instruction (CJCSI) 7401.01C, Combatant Commanders Initiative Fund, provides details regarding restrictions on the use of the CCIFs. Initiatives submitted for funding under this program must qualify within one of the following authorized activities: Joint exercises and force training. Contingencies and selected operations. Humanitarian and civic assistance (HCA). C2. Military education and training for military and related civilian personnel of foreign countries. Personnel expense of defense personnel for bilateral or regional cooperation programs. 6-40. There are a number of key questions the SF unit must answer when requesting CCIF support. These questions include the following: Is the request considered unforeseen or emergent and why? Is funding for this request to subsidize an ongoing project, supplement a budgetary shortfall, or support an expense that is normally the responsibility of the parent Service? Are there other funding sources for the request that fit the following and, if so, why are they not being used? Initiatives already funded by CCDRs executive agent or components. Normal Service operating costs (to include O&M costs). Initiatives that have other available funding sources, such as annual HCA submissions or C2 projects. Does the request have an effect on the military operations in the post-9/11 world, strengthen joint warfighting capability, or aid in transforming the joint force? What is the realistic impact of failure to fund the effort? Is there a liaison or SME on the joint staff for this effort? If so, identify the POC. Is there a clear statement of need? Is there a detailed cost estimate that includes TDY requirements, contractual services, equipment purchases, and unit costs, rates, and descriptions of contractual vehicles to be used? 6-41. Requests for the CCIF should be made by letter. Submissions are not limited to one page. Adequate information is required for the joint staff to assess each initiative. Answer all the requests for data in the submission. Additional information may be found at the following Web site: http://www.dtic.mil/cjcs_directives/cjcs/instructions.htm
6-10
FM 3-05.230
8 February 2009
Contracting Authority
6-43. No individual can contract for the USG without proper authority. It is critical for SF Soldiers to understand that contracting authority is not derived from the same place or in the same manner as command authority. In the USCENTCOM AOR, for example, contracting falls under the responsibility of the ASAALT. Before a contract is signed, the person signing the contract should ensure that he has adequate authorityin writing, through a warrant of written appointmentto sign the contract. 6-44. Contracts entered into without authority must be ratified by the contracting chain of command. If a contract is not ratified, the unauthorized signer may be required to pay for the contract out of pocket. As such, if authority is unclear, the SF Soldier should contact the contracting office or the servicing SJA for guidance. 6-45. Given proper authority, contracts are the legal agreements between the USG and individuals or businesses for the delivery of services, products, and equipment. A contractor can be a single individual or a giant corporation. Contractors may be U.S. citizens, foreign nationals, or HN personnel. Contracting Team 6-46. For the SF TACFAC, all contracts must incorporate protection and antiterrorism considerations. To effectively do this, the joint forward operating base (JFOB) needs a contracting team or needs to place the protection officer on the JFOB contracting team. The following key personnel should be on the team: Director of logistics division, director of contracting, or similar. Protection officer. Servicing SJA or legal officer. Contracting officer (KO) or FOO. These are the only people who can legally obligate the government to pay for materials and services. Contracting officer representative (COR) or contracting officer technical representative (COTR). These individuals cannot legally obligate the government to pay. These individuals often write SOWs and act as technical POCs for the KO, who may not be familiar with technology, materials, or tactics, techniques, and procedures (TTP). Task monitors. The COR or COTR also may serve as a task monitor. These personnel represent the unit initiating the contractual requirement. Comptroller, disbursing officer, or PA. These are the only people who can legally certify and deliver funds for payment to a vendor.
8 February 2009
FM 3-05.230
6-11
Chapter 6
Protection-Related Tasks in Contracting 6-47. Department of Defense Instruction (DODI) 2000.16, DOD Antiterrorism Standards, provides tasks to accomplish with regard to contracting while considering antiterrorism measures. These tasks are as follows: Implement a verification process, whether through background checks or other similar processes, that enables the USG to attest to the trustworthiness of DOD contractors and subcontractors (U.S. citizens and HN personnel), including those personnel having direct or indirect involvement in the delivery or provision of services related to mail, supplies, food, water, or other materiel and equipment intended for use by DOD personnel. This vetting of trustworthiness shall include husbanding agents and crews on contracted ships, planes, trains, and overland vehicles. Develop and implement site-specific risk-mitigation measures to maintain positive control of DOD contractor and subcontractor access to and within installations, sensitive facilities, and classified areas. Develop and implement site-specific risk-mitigation measures to screen contractor or subcontractor transportation conveyances for chemical, biological, radiological, nuclear, and high-yield explosives (CBRNE) hazards before entry into or adjacent to areas with DOD personnel and mission-essential assets. Ensure that contracts comply with the antiterrorism provisions of the Defense Federal Acquisition Regulation Supplement (DFARS). Types of Contracts 6-48. There are various types of contracts; each has advantages and disadvantages. SF Soldiers should consult the servicing contracting office for the type of contract best suited to the requirements. The most common types of contracts are Firm, fixed price (FFP). Cost-plus fixed fee (CPFF). Cost-plus award fee (CPAF). Time and materials (T&M). 6-49. Contracts can be modified using change orders. A change order adds, deletes, or changes tasks in the SOW. The change order provides flexibility when requirements change and the contract needs to be modified. Task orders usually are added to T&M contracts. Task orders often are placed on contracts when specific efforts (such as studies, analyses, and professional support services) are needed for a specified period of time. The task orders provide flexibility as needs change. Some examples of the products and services most likely acquired under contract are Local transportation services. Lodging on local economy. Security services outside the TACFAC (if allowed by applicable law). Fire department services. Potable water delivery. Electricity production and delivery. Natural gas, propane, or butane delivery. Sewer services. Garbage collection and disposal. Medical and hazardous-material disposal. Mortuary services. POL. Meals. Tool kits (for example, for carpenters, plumbers, or electricians).
6-12
FM 3-05.230
8 February 2009
Construction materials (for example, wood, brick, concrete, wallboard, nails, and screws). Construction services (for example, laborers, tradesmen, and craftsmen). Earth materials (for example, sand, gravel, and topsoil). Earth-moving equipment (for example, bulldozers, graders, scrapers, and dump trucks).
Contracting Methods
6-50. In most contingency environments there are two individuals that have authority to contract, and their methods differ. The first is the FOO, appointed by the unit. The second is a warranted KO, appointed by the principal assistant responsible for contracting (PARC) in theater. Both derive their authority from the contracting chain of command in theater. The primary difference in these individuals authority is the amount of money for which they can contract and the formalities that must be followed for each. Field Ordering Officer 6-51. The FOO generally uses a Standard Form (SF) 44 (U.S. Government Purchase Order Invoice Voucher) to contract and only has authority for contracts of $2,500 or less. This is the simplest form of contracting. In order for an FOO to be able to contract for goods or services, sufficient funds must be available from the PR&C. Additionally, all goods and services must be Emergency or mission-critical. Not immediately available through military supply channels. Immediately available from local vendors (on-the-spot purchase). At or below $2,500 (no split requirements). Available as a one-time delivery (over-the-counter) with a one-time payment. Fair and reasonably priced (rotate vendors). 6-52. In order to properly contract and execute payment, there are several procedures that the FOO and PA must follow. These procedures are as follows: Receive the requirement from the unit commander. Ensure funds are available on a PR&C. Locate the vendor and inspect the item. Determine a fair and reasonable price for the item. Prepare an SF 44. Execute the purchase (PA pays the vendor). Receive an itemized receipt from the vendor. Warranted Contracting Officer 6-53. Depending upon the terms of their warrant, KOs may have unlimited spending authority; however, they must follow strict procedures contained in the FAR and other applicable guidance. Figure 6-2, pages 6-14 and 6-15, provides a resourcing funds and contracting checklist. However, during contingency operations (and with the approval of either the PARC or the head of contracting activity), these requirements may be relaxed under certain specified circumstances. These circumstances require a written justification and approval describing unusual or compelling urgency. These documents must be reviewed by an SJA prior to approval by the appropriate level of the contracting chain of command. In Iraq, for example, the head of contracting activity possessed the statutory authority to make competition and FAR exceptions for acquisitions up to $75 million. Such exceptions by the head of contracting activity are not the norm, primarily because there are a number of other procurement flexibilities in a contingency environment designed to meet the needs of commanders. Whatever method is used, the process used by KOs follows a similar path.
8 February 2009
FM 3-05.230
6-13
Chapter 6
Define the exact requirement for the specific support, service, or product required. Identify alternatives to contracting for the service or support. Determine if local vendors or contractors accept the international merchant purchase authorization card (IMPAC). Determine if local vendors or contractors accept payment in local currency. Determine if local lodging providers accept payment in local currency or IMPAC. Determine if payments to local contractors will be in cash or by check. Identify who will provide security for the funds before and during disbursement if payments are made in cash. Identify who will provide security for disbursement personnel traveling to and from the TACFAC. Estimate the amount of cash needed to pay local vendors and contractors for products and services. Determine if the contracting task managers need translators. Identify how translators will be paid (cash, check, or electronic banking). Determine if escorts for local contractors will be needed. Develop and obtain approval for a method for letting local contractors into the TACFAC. Determine if enough real estate has been obtained through SOFAs or other means to provide adequate standoff protection from VBIEDs. Use the threat assessment and vulnerability assessment to determine contractual requirements. Identify the local capabilities for security and antiterrorism measures that must be considered if HN contractors are employed at the TACFAC. Designate a contractor entry point. Identify additional security measures that the contractor can provide during the service or support. Identify what the contractor can do to augment existing security arrangements. Determine if the contractor can properly vet the security clearance for all employees. Determine what measures of uncertainty still exist after vetting the contractors employees. Determine if the unit considered asking for periods of support or service that are not routine or predictable in order to reduce risk of exposure. Determine if coordination with the contractor ensures a more predictable time period of coverage. Determine if local agencies can provide extra assistance if the contractor is unable to provide additional OPSEC or protection measures. Determine if the unit can add extra protection measures as needed. Where vetting cannot be achieved or additional protection measures cannot be contracted, identify what specific protection measures the unit can implement to narrow operational risk. Determine if the reason for the service or support requirement is really needed after all. Determine if the operational benefit of receiving the service or support outweighs the identified security shortfalls. Determine if the support tasks are mandated or can operational flexibility be employed to mitigate the overall risk. For support contracts, determine if the unit incorporated antiterrorism considerations into the contract, such as conducting background checks of all contractor and subcontractor employees. Establish a process for positively identifying all contractor and subcontractor employees and consider the use of the following: Photo IDs with fingerprints. Official IDs with fingerprints. USG-issued IDs (only after background checks) with fingerprints. Company-issued IDs (as last resort) with fingerprints.
6-14
FM 3-05.230
8 February 2009
Limited vehicle access. Daily personnel-access lists with photos and fingerprints. Daily vehicle-access list. Roster of all watercraft being used. Roster identifying all food and water sources being used. Determine if contractor understands, acknowledges, supports, and briefs appropriate company and subcontractor personnel on the antiterrorism measures to be implemented. Determine if the measures have been coordinated with and approved by appropriate local agencies. Determine if there is a reliance on local contracts for aircraft services and support. Identify the local security procedures at the selected airfields that contractors must follow. Determine if there is a means to identify and approve contractors to work at the airfields.
Figure 6-2. Resourcing funds and contracting checklist (continued) 6-54. During contingency operations, there are several simplified acquisition methods in the KO arsenal. These methods vary in complexity and approval requirements. SF units should consult with their SJA and KO to select the best method. In acquiring goods or services, the KO may use any of the following: Purchase orders. The KO offers to buy supplies, services, or construction. The contract occurs when written acceptance is received. Forms used during purchase orders include DD Form 1155 (Order for Supplies or Services), SF 33 (Solicitation, Offer, and Award), or SF 44. Government purchase card (GPC). Accommodation or purchase card checks. Blanket purchase agreements (BPAs). BPAs are advance agreements for future contracts that offer to repetitively use supplies or services. BPAs set the price, terms, and clauses to rapidly acquire items. BPAs do not require the USG to use the same contractor. The form used for a BPA is the DD Form 1155. Imprest funds. Imprest funds are petty cash funds established by the disbursing officer for cashiers. Imprest funds are specifically identified for certain use. The maximum amount advanced to units or cashiers is $10,000. Cash may be used to pay for micropurchases (limited to $2,500 each). These funds generally are used for immature theaters, and appropriated funds are used to reimburse the imprest funds. Each purchase handling imprest funds must be validated and authorized; cashiers cannot be ordering officers (separation of duty). Existing contracts. Contracts may exist with other Services or USG agencies that meet unit requirements. The KO can amend or use existing contracts. LOGCAP. Several contracts for support exist. Air Force Civil Augmentation Program (AFCAP). AFCAP is used primarily for civil engineering projects. Acquisition and cross-servicing agreements. The DOD has authority to acquire logistic support within NATO, United Nations (UN), and other nations approved by the Department of State (DOS).
8 February 2009
FM 3-05.230
6-15
Chapter 7
PROCEDURES
7-1. The overall authority for the RIP lies with the SF commander ordering the change. The responsibility for determining the details of the RIP lies with the incoming commander who will assume responsibility for the mission. The RIP process may affect the circumstances of mission continuation, ranging from command to operational climate. 7-2. The outgoing SFODA commander advises the incoming SFODA commander on the tentative RIP, his assumption of command, and the mission. If the outgoing SF commanders advice conflicts with the mission statement or the incoming commanders requirements, and the conflict cannot be resolved by the authority established for the incoming commander, their senior SF commander ordering the RIP will resolve any issues. 7-3. As a general rule, the senior SF commander ordering the RIP does not automatically place the outgoing SFODA under OPCON of the incoming SFODA. Although doing so would offer a clear and easily defined solution to establishing the incoming SF commanders authority, it is not the most effective control method, particularly if hostile contact occurs during the mission-handoff process. 7-4. If the incoming SFODA comes into direct fire contact with hostile forces during the RIP, the outgoing SFODA immediately notifies the HQ that ordered the RIP. If the incoming SFODA commander has not yet assumed responsibility, his SFODA immediately comes under OPCON of the outgoing SFODA and is absorbed into that SFODA position. If the outgoing SFODA commander already has passed responsibility to the incoming SFODA commander, the outgoing SFODA comes under OPCON of the incoming SFODA. The key for both incoming and outgoing commanders is to maintain operational continuity.
CONSIDERATIONS
7-5. During the incoming SFODAs assumption of control over a TACFAC from an outgoing SFODA, there are a number of operational considerations both commanders must resolve in order for the mission handoff to go smoothly. Both SFODAs and commanders spend the time available equally for the RIP. This means that initially the outgoing SFODA leads by example and the incoming SFODA observes. Halfway through the RIP they switch, and the incoming SFODA commander leads under the watchful eye of the
8 February 2009
FM 3-05.230
7-1
Chapter 7
outgoing SFODA commander. Both SF commanders must consider the six critical METT-TC factors during the RIP process. Questions the incoming commander should have answers to include the following: How will the incoming and outgoing SFODAs infiltrate and exfiltrate the TACFAC? Will TACFAC movement be clandestine or overt (using military or civilian vehicles)? What are the TACFAC support requirements to conduct a successful RIP? Was a 100-percent TACFAC inventory conducted? Was all the stay-behind TACFAC equipment accounted for and signed for? Are there TACFAC shortage annex documents and requisitions for any missing items?
MISSION
7-6. The incoming SFODA commander must make a detailed study of the SFODA mission statement and understand the current mission tasks (to include implied mission tasks). The mission may require an SFODA with advanced skill sets, such as unique infiltration and exfiltration qualifications, Special Forces advanced urban combat (SFAUC) skills, or sniper skills. Knowing the mission, the commanders concept of the mission, the CCIRs, priority intelligence requirements (PIRs), and information requirements will facilitate the incoming SFODA commanders RIP process and provide a firm grasp of the mission. After an in-depth study of the current operations in the AO, the incoming SFODA commander completes the mission handoff in a manner that facilitates uninterrupted mission accomplishment. The RIP process is conducted in such a way that the enemy is denied an opportunity to gain any operational advantage.
ENEMY
7-7. The incoming SFODA commander must have the most current ISR data available on all enemy forces that may impact the mission. This data especially includes terrorists and terrorism-related incidents over the past several months. In addition to this intelligence provided to the incoming SFODA commander on a regular basis, the outgoing SFODA may provide an intelligence liaison element. OPSEC is critical to prevent the enemy from discovering the impending relief and possibly exploiting the RIP process. The outgoing SF commander provides continuous intelligence updates to the incoming SF commander. The outgoing SF commander also provides the PIRs and information requirements established for the initial mission, along with strategic, operational, and tactical information. The incoming SF commander must become completely familiar with the current PIRs and information requirements, as well as the PIRs and information requirements of any additional or newly assigned requirements.
7-2
FM 3-05.230
8 February 2009
time period for overlap before the mission handoff and to allow for actual face-to-face contact between the HN and all the SFODA participants.
TIME AVAILABLE
7-11. The depth and dispersion of friendly forces and the number of operations being conducted will dictate the amount of time required to conduct a RIP. There must be a transition overlap period for both SFODAs to allow the incoming SFODA to become familiar with the AO and to be introduced to and establish rapport with local civilians and their HN counterparts. However, the mission handoff must be completed as quickly as possible. A smooth RIP reduces time the enemy has to mount a strike before the incoming SFODA consolidates its position. However, the SFODAs should not sacrifice the quality of ongoing operations simply for extra time. The incoming SFODA needs to have enough time to observe daily tasks, training, and TTP, as well as to conduct debriefs on all their lessons learned.
CIVIL CONSIDERATIONS
7-12. The incoming SFODA must conduct an in-depth area study, with specific attention given to local HN problems. Popular or unpopular civilian support for U.S. activities taking place within the AO may directly influence changes in the mission statement. The outgoing SFODA must provide the incoming SFODA critical information that describes in detail all completed and ongoing local civic-action projects. The incoming SFODA should understand the functioning of the local and regional HN government, the status of any international agencies or NGOs involved, and their ability to influence the HN population in the AO.
8 February 2009
FM 3-05.230
7-3
Chapter 7
7-4
FM 3-05.230
8 February 2009
What special or SF-peculiar equipment or logistics are required, if any? How many HN personnel are staffed at the TACFAC? How long have the HN personnel worked there? What are the HN salaries and when do they get paid? What local contractors are used for sustainment and daily operations? Have these HN employees been vetted by qualified personnel? Are there any unfinished security or HN personnel issues? What daily functions or procedures occur that need to be addressed? Are groceries purchased locally? If so, who is designated to purchase them? Are there specific contractors used for infrastructure repair (such as water, plumbing, fuel, and electricity)? If the facility has generators for primary and backup sources of power, where does the fuel come from? 7-24. The incoming SFODA recognizes that the outgoing SFODA is the best source of information about their urban areait is always better for the incoming unit to ask too many questions than not enough. During the RIP process, the outgoing SFODA must be prepared for the possibility that the incoming SFODA did not arrive with all of its supplies and equipment. When this happens, oversized cargo transportation must be coordinated for large SFODA equipment packages that cannot be carried by civilian vehicles. For example, an ISU-90 type container must be moved by a larger transport vehicle. 7-25. Along with proper inventory of the facility and equipment, the incoming 18B should review the security plan with the outgoing 18B. The existing security plan should cover all security measures in the event that hostile action occurs. Security areas of concern regarding the TACFAC include the following: Are there any immediate security measures that must be completed in the next 30 days? What are the weakest and strongest points of security at the TACFAC? How have the weak points been fixed or improved? Are the present physical barriers, obstacles, and wire adequate or are more needed? Are mobile communications between security personnel secure, or are they using nonsecure radios (such as the Motorola Talk-About) susceptible to radio direction finding and interception? What is the minimum safe distance from the outer barrier to the TACFAC in the event that a powerful VBIED detonates? Is there appropriate overhead cover available to protect against mortar attacks? Is there an early warning signaling system that alerts when an attack is imminent or over? What are the PACE evacuation plans for the SFODA and other personnel? 7-26. Both SFODAs should understand their responsibilities in the event of hostile activity during the urban RIP. Once the transition is complete, the incoming SFODA coordinates transportation for the outgoing SFODA to their point of departure. This move must be planned and coordinated in advance and thoroughly understood by both parties during the RIP process. The equipment load for the outgoing SFODA may be potentially larger than that of the incoming SFODA.
8 February 2009
FM 3-05.230
7-5
Chapter 7
7-28. All appropriate methods of infiltration are considered and war-gamed to determine which technique is best suited for the mission. The SFODA also should consider the following: Is the SFODA receiving HN support? Does the TACFAC positively impact the local area by hiring workers and using local vendors? Are indigenous forces dependent upon the TACFAC and SFODA, or is the TACFAC dependent on the local population? 7-29. Many urban TACFACs enjoy a high level of logistical sustainment that is absent in rural TACFACs. When operating in remote areas, SF planners must consider the following: Will the incoming SFODA be able to sustain present logistics requirements at the TACFAC? Are supplies delivered by parachute, helicopter, or by ground vehicles? Is there an available DZ and LZ or do they need to be built? What local supplies and vendors are available to the SFODA? How long can the SFODA sustain TACFAC operations independently without support from the JSOTF or SOTF? 7-30. When the rural RIP process is complete between the SFODAs, the incoming SFODA must give priority consideration to the exfiltration of the outgoing SFODA. Historically, SFODAs accumulate a great deal of equipment. How, when, and where the SFODA is exfiltrated are important planning considerations. The incoming SFODA commander must ensure that coordination and synchronization is made with the SOTF and JSOTF.
CLOSEOUT ASSISTANCE
7-33. Operational planning is continuous, and the ultimate goal for the TACFAC is revised to reflect the existing political and military climate. For example, the initial EPA for a TACFAC may include vehicles and personnel support from the HN. This plan can (and should) be reviewed and revised as necessary, especially when a U.S. carrier task force enters the region. 7-34. CA teams may be provided to assist the SF unit in a TACFAC closeout. This option is particularly effective when the facility is to be turned over to an NGO and no suitable provisional government exists to assume control. PSYOP units may also be used to assist in closeout by establishing programs to explain to the local HN population the procedures and rationale for the particular disposition of the TACFAC and to prepare them emotionally for the change. Note: A fully functioning active TACFAC that employs HN locals for its support will create a large gap in the local HN economy with the departure of U.S. SF. Plans for this transition should be incorporated in the final disposition of the TACFAC to reduce the economic and political impact on the local population.
7-6
FM 3-05.230
8 February 2009
8 February 2009
FM 3-05.230
7-7
Appendix A
Area Study
Figure A-1, pages A-1 through A-5, provides an outline format for an SF area study. This format is UNCLASSIFIED until filled in with operational data. Then, the classification is determined by the appropriate classification authority.
(CLASSIFICATION) Copy_____ of _____Copies Location Date AREA STUDY OF JOINT SPECIAL OPERATIONS AREA
I. PURPOSE AND LIMITING FACTORS. A. B. C. II. Purpose. Delineate the area being studied. Mission. State the mission that the area study supports. Limiting factors. Identify factors that limit the completeness or accuracy of the area study.
_____ SFG(A)
GEOGRAPHY, HYDROGRAPHY, AND CLIMATE. Divide the operational area into its various definable subdivisions and analyze each subdivision as outlined below. A. B. Areas and dimensions. Strategic locations: 1. 2. 3. Neighboring countries and boundaries. Natural defenses, including frontiers. Points of entry and strategic routes.
C. Climate. Note variations from the norm and the months in which they occur. Note any extremes in climate that could affect operations, particularly the following: 1. 2. 3. 4. 5. D. 1. 2. 3. Temperature. Rainfall and snow. Wind and visibility. Light data. Include times for begin morning nautical twilight (BMNT), end evening nautical twilight (EENT), sunrise, sunset, moonrise, and moonset. Seasonal effect of the weather on terrain and visibility. General direction of mountain ranges or ridgelines and whether hills and ridges are dissected. General degree of slope. Characteristics of valleys and plains. (CLASSIFICATION)
Relief:
8 February 2009
FM 3-05.230
A-1
Appendix A
(CLASSIFICATION)
4. 5. 6. E. 1. 2. Natural routes for (and natural obstacles to) cross-country movement. Location of area suitable for guerrilla bases, units, and other installations. Potential LZs, DZs, and other reception sites. Former heavily forested land areas subjected to widespread cutting or dissected bypaths and roads. Also note pastureland or wasteland that has been restored. Former wasteland pastureland that has been resettled and cultivated and is now being farmed. Also note former rural countryside that has been depopulated and allowed to return to wasteland. Former swampland or marshland that has been drained, former desert or wasteland now irrigated and cultivated, and lakes created by dams. Main rivers and their direction of flow. Characteristics of rivers and streams. Note widths, currents, banks, depths, bottom types, and obstacles. Seasonal variations. Note dry beds and flash floods. Large lakes or areas with many ponds or swamps. Note potential LZs for amphibious aircraft. Tides, waves, winds, and current. Beach footing and covered exit routes. Quiet coves and shallow inlets and estuaries.
3. F.
G. Coast. Examine for infiltration, exfiltration, and resupply points, noting the following: 1. 2. 3. I.
H. Geological basics. Identify types of soil and rock formations, and potential LZs for light aircraft. Forests and other vegetation: 1. 2. 3. 4. J. 1. 2. 3. 4. Natural or cultivated. Types, characteristics, and significant variations from the norm at different elevations. Cover and concealment. Include density and seasonal variations. Water. Seasonal or year-round. Cultivated. Include vegetables, grains, fruits, and nuts. Natural. Include berries, fruits, nuts, and herbs. Wildlife. Include animals, fish, and fowl.
Subsistence:
III. POLITICAL CHARACTERISTICS. Identify friendly and hostile political powers and analyze their capabilities, intentions, and activities that influence mission execution, particularly the following: A. Hostile power: 1. 2. B. 1. 2. Number and status of non-national personnel. Influence, organization, and mechanisms of control. Government, international political orientation, and degree of popular support. Identifiable segments of the population with varying attitudes and probable behavior toward the United States, its allies, and the hostile power. (CLASSIFICATION)
National government:
A-2
FM 3-05.230
8 February 2009
Area Study
(CLASSIFICATION)
3. 4. 5. 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. National historic background. Foreign dependence or allies. National capital and significant political, military, and economic concentrations. Leadership and organizational structure. Nationalistic origin and foreign ties (if single dominant party exists). Major legal parties with their policies and goals. Illegal or underground parties and their policies and goals. Violent opposition factions within major political organizations. Documentation. Rationing. Travel and movement restrictions. Blackouts and curfews. Political restrictions. Religious restrictions.
C. Political parties:
IV. ECONOMIC CHARACTERISTICS. Identify economic factors that influence mission execution, particularly the following: A. B. D. Technological standards. Natural resources and degree of self-sufficiency. Monetary system: 1. 2. 3. E. F. Value of money and rate of inflation. Wage scales. Currency controls.
Black market activities. Note the extent and effect of those activities. Agriculture and domestic food supply.
G. Industry and level of production. H. Manufacture and demand for consumer goods. I. J. K. L. Foreign and domestic trade and facilities. Fuels and power. Telecommunications adequacy (by U.S. standards). Transportation adequacy (by U.S. standards): 1. 2. 3. 4. Railroads. Highways. Waterways. Commercial air installations.
M. Industry, utilities, agriculture, and transportation. Note the control and operation of each. (CLASSIFICATION)
8 February 2009
FM 3-05.230
A-3
Appendix A
(CLASSIFICATION)
V. CIVIL POPULACE. Pay particular attention to those inhabitants in the AO that have peculiarities and that vary considerably from the normal national way of life. Note the following: A. B. Total population and density. Basic racial stock and physical characteristics: 1. 2. Types, features, dress, habits. Significant variations from the norm.
C. Ethnic and religious groups. Analyze these groups to determine if they are of sufficient size, cohesion, and power to constitute a dissident minority of some consequence. GTA 41-01-005, Religious Factors Analysis, provides more information about religious groups. Note the following: 1. 2. 3. 4. Location or concentration. Basis for discontent and motivation for change. Opposition to the majority or the political regime. Any external or foreign ties of significance.
D. Attitudes. Determine the attitudes of the populace toward the existing regime or hostile power, the resistance movement, and the United States and its allies. E. Division between urban, rural, or nomadic groups. Note the following: 1. 2. 3. F. 1. 2. Large cities and population centers. Rural settlement patterns. Area and movement patterns of nomads. Extremes away from the national average. Class structure. Identify degree of established social stratification and percentage of populace in each class. General health and well-being. Common diseases. Standard of public health. Medical facilities and personnel. Potable water supply. Sufficiency of medical supplies and equipment.
H. Traditions and customs, particularly taboos. Note wherever traditions and customs are so strong and established that they may influence an individuals actions or attitude, even during a war situation. VI. MILITARY AND PARAMILITARY FORCES. Identify friendly and hostile conventional military forces (army, navy, and air force) and internal security forces (including border guards) that can influence mission execution using the following subdivisions: A. B. Morale, discipline, and political reliability. Personnel strength.
C. Organization and basic deployment. D. Uniforms and unit designations. E. Ordinary and special insignia. (CLASSIFICATION)
A-4
FM 3-05.230
8 February 2009
Area Study
(CLASSIFICATION)
F. Overall control mechanism. G. Chain of command and communication. H. Leadership. Note officer and NCO corps. I. J. K. L. Non-national surveillance and control over security forces. Training and doctrine. Tactics. Note seasonal and terrain variations. Equipment, transportation, and degree of mobility.
M. Logistics. N. Effectiveness. Note any unusual capabilities or weaknesses. O. Vulnerabilities in the internal security system. P. Past and current reprisal actions. Q. Use and effectiveness of informers. R. Influence on and relations with the local populace. S. T. Psychological vulnerabilities. Recent and current unit activities.
U. Reconnaissance activities and capabilities. Pay particular attention to reconnaissance units, special troops (airborne, mountain, or Ranger-type units), rotary-wing or vertical-lift aviation units, CI units, and units having a mass CBRNE delivery capability. V. Guard posts and wartime security coverage. Note the location of all known guard posts or expected wartime security coverage along the main LOCs (railroads, highways, and telecommunications lines) and along electrical power and POL lines.
VII. EFFECTS OF CHARACTERISTICS. State conclusions reached through analysis of the facts developed in previous paragraphs: A. B. Effect on hostile COAs. Effect on friendly COAs.
8 February 2009
FM 3-05.230
A-5
Appendix B
Site Survey
The site survey checklist is a planning tool used by an SF site survey team. When filled out, it helps answer S-2, S-3, and S-4 TACFAC questions identified during the survey or during the early stages of operations. The site survey checklist shown in Figure B-1, pages B-1 through B-3, is a guide; it is not meant to be all-inclusive. The checklist can be modified as needed. This format is UNCLASSIFIED until filled in with operational data. Once filled in, the classification level is determined by the appropriate classification authority.
Security Assistance Organization S-2
I. II. Intelligence briefing. Threat briefing.
III. Maps and imagery of the area. IV. Weather forecast data. V. Restricted and off-limits areas.
S-3
I. Initial coordination. A. B. C. D. E. F. II. Tentative TACFAC construction plans. Tentative training plans. Aviation support tentatively available (hours and type of aircraft). HN plans (tentative). Problem areas. EPA-related directives, guidance, plans, or orders.
S-4
I. II. Transportation requirements. Special equipment requirements.
III. Other support requirements. IV. TACFAC construction equipment and supply requirements.
8 February 2009
FM 3-05.230
B-1
Appendix B
III. Units available for training. IV. C2. V. Additional training desires.
S-2
I. II. II. Local civilians. Protection and security policies and problems. Populace control requirements (identification cards or passes).
S-3
I. II. Training plan. Support available. A. B. C. D. E. Ammunition. Weapons. Vehicles. Aircraft or air items. Facilities and equipment: 1. 2. 3. 4. 5. Training areas. Classrooms. Ranges. Training aids. Special equipment.
III. Unit equipment. IV. LZs, DZs, and HLZs in the area. V. Maps and other imagery.
VI. Rations for field training. VII. Daily training schedules and status reports. VIII. POC for training problems. IX. Holidays, customs, taboos, and unit requirements that may interfere with training.
B-2
FM 3-05.230
8 February 2009
Site Survey
S-3 (continued)
X. Medical and dental support.
S-4
I. TACFAC construction. A. B. C. D. E. II. Barracks. Drinking water. DFAC. Secure storage areas. Electrical power supply.
Fuel supply.
III. Rations. IV. Transportation. V. Lumber and materials for construction and training aids.
VI. Special equipment. VII. Ammunition. VIII. Availability of construction resources, equipment, tools, and supplies.
8 February 2009
FM 3-05.230
B-3
Appendix C
Area Assessment
In order to plan, train, and conduct SO, SFODA commanders require specific and current data about their AO. This data, when collected and confirmed, is called an area assessment. This format is UNCLASSIFIED until filled in with operational data. Then, the classification is determined by the appropriate classification authority.
GENERAL
C-1. The area assessment is a valuable tool used for the immediate and continuing collection of information started after infiltration into an AO. Characteristically it Confirms, corrects, or refutes previous intelligence of the AO acquired as a result of the area study and other data sources prior to the infiltration. Forms the basis for tactical, operational, and logistical planning for the AO. Includes information on METT-TC and terrain analysis. Includes information on the different religious and ethnic tribal elements of the indigenous population in the AO. C-2. The results of the area assessment are transmitted to the SOTF when there is marked deviation from previous intelligence. The SOTF prescribes in appropriate SOPs and annexes those items that are reported. The three types of area assessments are initial, principal, and preventative medicine.
III. Overall security issues: A. B. Immediate area. Attitude of the local populace toward HN government and SF presence.
C. Local enemy situation. IV. Status and type of the local insurgent elements.
8 February 2009
FM 3-05.230
C-1
Appendix C
(CLASSIFICATION)
I. Enemy: A. B. Morale and motivation. Composition, identification, and strength.
C. Organization, armament, and equipment. D. Degree of training, morale, and combat effectiveness. E. Operations. 1. 2. Recent and current activities of the unit. Insurgent activities and capabilities. Give particular attention to IEDs, VBIEDs, suicide bombers, reconnaissance elements, rotary-wing or vertical-lift aviation units, and units having a mass CBRNE delivery capability.
F.
Unit AO.
G. Daily routine of the units. H. Logistical support, to include 1. 2. 3. I. II. Installations and facilities. Supply routes. Methods of troop movement.
Security and police units: A. B. Dependability and reliability to the existing regime or the occupying power. Morale and motivation.
C. Composition, identification, and strength. D. Organization, armament, and equipment. E. F. Degree of training, morale, and efficiency. Utilization and effectiveness of confidential informants.
G. Influence on and relations with the local populace. H. Active and passive security measures in place for public utilities and government installations. III. Civil government: A. Controls and restrictions, such as 1. 2. 3. 4. B. D. E. F. Documentation. Rationing. Travel and movement restrictions. Blackouts and curfews.
Current value of money and wage scales. Political restrictions. Religious restrictions. Control and operation of industry, utilities, agriculture, and transportation.
C-2
FM 3-05.230
8 February 2009
Area Assessment
(CLASSIFICATION)
IV. Civilian population: A. B. Attitude toward the existing regime or occupying power. Attitude toward the resistance movement.
C. Reaction to U.S. support of the resistance. D. Reaction to enemy activities within the country, specifically that portion which is included in guerrilla warfare operational areas. E. V. General health and well-being.
Potential targets (for each, consider population reaction): A. B. C. E. F. Railroads. Telecommunications. POL. Military storage and supply. Military HQ and installations.
D. Electric power.
G. Radar and electronic devices. H. Highways. I. J. K. L. Inland waterways and canals. Seaports. Natural and synthetic gas lines. Industrial plants.
M. Key personalities. VI. Weather: A. B. Precipitation, cloud cover, temperature, visibility, and seasonal changes. Wind speed and direction.
C. Light data, including BMNT, EENT, sunrise, sunset, moonrise, and moonset. VII. Terrain: A. B. Location of areas suitable for guerrilla bases, units, and other installations. Potential LZs, DZs, and other reception sites. 1. 2. E. Guerrilla forces. Enemy forces
VIII. Resistance movement: A. Guerrillas: 1. 2. Disposition, strength, and composition. Organization, armament, and equipment. (CLASSIFICATION)
8 February 2009
FM 3-05.230
C-3
Appendix C
(CLASSIFICATION)
3. 4. 5. 6. 7. 8. 9. B. 1. 2. 3. 4. 5. Status of training, morale, and combat effectiveness. Operations to date. Cooperation and coordination between various existing groups. General attitude towards the United States, the enemy, and various elements of the civilian population. Motivation of the various groups and their receptivity. Caliber of senior and subordinate leadership. Health of the guerrillas. Disposition, strength, and degree of organization. Morale, general effectiveness, and type of support. Motivation and reliability. Responsiveness to guerrilla or resistance leaders. General attitude towards the United States, the enemy, and various guerrilla groups.
IX. Logistics capability of the area: A. B. Availability of food stocks and water, to include any restrictions for reasons of health. Agriculture capability.
C. Type and availability of transportation of all categories. D. Types and location of civilian services available for manufacture and repair of equipment and clothing. E. F. Supplies locally available, to include type and amount. Medical facilities, to include personnel, medical supplies, and equipment.
C-4
FM 3-05.230
8 February 2009
Area Assessment
(CLASSIFICATION)
I. Climatology and topography: A. Cold weather: 1. 2. 3. 4. B. 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. II. How long is the cold weather season? What is the temperature range? Is the weather cold enough to put emphasis on causes, treatments, and prevention of coldweather injuries? Is it dry cold or wet cold? How long is the hot-weather season? What is the temperature range? Is the weather hot enough to put emphasis on causes, treatment, and prevention of heat injury? Is acclimatization necessary? If so, how many days? Describe humidity. What types of terrain are present? What is the range in elevation? Are there swamps present? Are rivers present? Describe terrain over where the unit will operate and where the camp is located. How does the terrain affect evacuation and medical resupply?
Hot weather:
C. Terrain:
Indigenous personnel: A. Physical characteristics: 1. 2. 3. B. Give names of tribes or groups the unit will associate with. Describe indigenous personnel in terms of height, body build, and color and texture of skin and hair. Provide photographs if available. Describe the endurance, ability to carry loads, and other physical capabilities of the indigenous personnel. Describe clothing, principal ornamentation, and footwear. What symbolism is attached to various articles of clothing and jewelry, if any? Are amulets worn and what do they symbolize? Provide photographs if available. What taboos and other psychological attributes are present in the society? What are attitudes toward birth, puberty, marriage (for example, monogamy or polygamy), aging, sickness, and death? Describe any rituals associated with these events. Describe attitudes toward doctors and Western medicine. Describe rights and practices by witch doctors during illness. What do these rites symbolize? Does the practitioner use Western medicines? (CLASSIFICATION)
Dress: 1. 2. 3.
C.
Attitudes: 1. 2. 3. 4.
8 February 2009
FM 3-05.230
C-5
Appendix C
(CLASSIFICATION)
5. Do indigenous personnel respond to the events (for example, fear, happiness, anger, or sadness) in the same manner an American would? Describe the physical layout of the community. Provide aerial photographs, diagrams, and notes. Describe construction techniques and materials used. Give the layout of a typical house (for example, sleeping areas and cooking areas). Describe infestation with ectoparasites and rodents. Describe general cleanliness. List the number of people inhabiting a typical dwelling. Describe the ordinary diet. Is food cultivated for consumption? Which foods? Describe agricultural practices (for example, clear-cutting and permanent farms). Do hunting, fishing, and gathering wild crops contribute significantly to the diet? What wild vegetables are consumed? How is food prepared? What foods are pickled, smoked, cooked, or eaten raw? How are foods preserved? At what age are children weaned? What diet is provided infants after weaning occurs? Which members of the family are given preference at the table? Are there food-related taboos? Is milk denied children, infants, and pregnant or lactating women? Why? How do the seasons influence diet? Are there famines? Does migration in search of food occur?
D. Housing: 1. 2. 3. 4. 5. E. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Food:
10. What foods provided by U.S. personnel do indigenous personnel prefer or reject? 11. What cash crops are raised? III. Water supply, urban: A. B. Is water plentiful? Is water treated?
C. What kind of water treatment plants are used (if any)? IV. Water supply, rural: A. List the numbers and types of rural water supplies. 1. 2. 3. 4. B. What are the sources (for example, rivers, springs, or wells)? Is the same water used for bathing, washing, and drinking? How far is the water source from the community? Is water plentiful or scarce? Give seasonal relationships to water availability. Is water rationed by indigenous personnel? Is water boiled? Is water filtered or subjected to other purification process before consumption? (CLASSIFICATION)
C-6
FM 3-05.230
8 February 2009
Area Assessment
(CLASSIFICATION)
3. 4. V. What is the attitude of indigenous personnel toward the standard U.S. purification methods? Is the untreated water safe for bathing?
Sewage disposal (when applicable): A. B. What are the types and locations of sewage treatment plants? Do urban areas have combined or separate sewage systems?
C. What are the locations of outfalls and conditions of receiving streams before and after receiving affluent? State whether or not affluent is chlorinated and, if so, how much. D. What types of sewage disposal is used in those areas not connected to a sewer system? Give approximate numbers of 1. 2. 3. E. Septic tanks. Cesspools and leaching pits. Sanitary privies.
In the community, what system is used for disposal of human excrement, offal, and dead animals or humans? 1. 2. 3. 4. Is excrement collected for use as a fertilizer? How is it done? What scavengers commonly assist in the process of disposal (for example, animals or birds)? What is the relationship of disposal sites to the watering sites? What is the attitude of indigenous personnel to standard U.S. methods, such as the use of latrines?
VI. Epidemiology. Describe specific diseases present among the guerrillas, dependents, and their animals. Relate the occurrence of more than one similar illness at a given time to a common source or event. Are there occurrences of A. B. Respiratory disease? Arthropod-borne disease?
C. Intestinal disease? D. Venereal disease? E. Miscellaneous diseases, such as tetanus, scabies, and dermatophytosis?
VII. Domestic animals: A. What domestic animals are present? 1. 2. 3. B. 1. 2. 3. Are they raised for food, labor, or other purposes? Of what importance is the herd or flock economically? Is any attempt made to breed animals selectively? Do owners supplement the food supply? What supplements are given? Are animals penned or allowed to roam? Where are the animals housed?
C. Is there any religious symbolism or taboo associated with animals? Are animals sacrificed for religious purposes? D. Describe in detail the symptoms and signs of any diseased animals. List the species involved. (CLASSIFICATION)
8 February 2009
FM 3-05.230
C-7
Appendix C
(CLASSIFICATION)
E. If disease is epidemic, describe the epidemic. 1. 2. 3. 4. 5. 6. 7. 8. 9. What percentage of the herd or flock demonstrated illness? Did all the illnesses occur spontaneously or over a period of time? Was more than one herd or flock affected at the same time and location? Did the epidemic spread to neighboring communities? What was the time interval between? Were young and old animals similarly affected, or just one group? Had similar outbreaks occurred before? Was the outbreak related to the introduction of new animals to the herd or flock or to another observable event? What event? How long after the event did the outbreak occur? At what time of year did the breakout occur (seasonal)? What percent of animals died? Were any human illnesses associated with the outbreak and what were the symptoms?
10. What measures, if any, did the owners take to control the outbreak? What was done with sick or dead animals? 11. Do herds or flocks reproduce normally or is early abortion common? 12. Are animals healthy looking or in generally poor condition? 13. What symptoms did sick animals show? 14. Are local veterinarians available for animal treatment and ante- and postmortem inspections of meats? What is their training? 15. If lay treatment of animals is accomplished, what are common treatments and practices? 16. What is previous vaccination history, if any? 17. Are the following diseases endemic to animals in the area: a. b. c. d. e. f. g. h. i. VIII. Anthrax? Brucellosis? Tularemia? Rabies? Trichinosis? Worms? Bovine Tuberculosis? Q-fever? Others?
Local animals (fauna): A. B. Record species of birds, large and small mammals, reptiles, and arthropods present in the area. If names are unknown, describe the species. Note relationship of these species, including burrows and nesting sites, to human habitation, food supplies, and watering sites.
C. Note the occurrence of dead or dying animals, especially if the die-off involves a large number of a given species. Note relationship of die-off to occurrence of human disease. D. Report any methods used by indigenous personnel to defend against ectoparasites. How effective are standard U.S. protective measures?
C-8
FM 3-05.230
8 February 2009
Area Assessment
(CLASSIFICATION)
IX. Poisonous plants (flora). Record those species known to be toxic to man through contact with the skin, inhalation of smoke from burning vegetation, or through ingestion. X. Arthropods of medical importance. Include species and prevalence of the following: A. B. C. D. E. F. Mosquitoes. Flies. Fleas. Mites. Ticks. Lice.
8 February 2009
FM 3-05.230
C-9
Glossary
SECTION I ACRONYMS AND ABBREVIATIONS
18B 18C 18D 18E AAR ACA ACM ACO ACSIM AFCAP ALE ALT AMC AO AOA AOB AOR AP ARNG ARNGUS ARSOF ASAALT ASCC ASOC ASP AT ATC ATEP ATO AUTODIN BDA BMNT BP BPA C2 CA Special Forces weapons sergeant Special Forces engineer sergeant Special Foces medical sergeant Special Forces communications sergeant after-action review airspace coordination area airspace coordinating measure airspace control order Assistant Chief of Staff for Installation Management Air Force Civil Augmentation Program Army special operations forces liaison element altitude Army Materiel Command area of operations amphibious objective area advanced operating base area of responsibility antipersonnel Army National Guard Army National Guard of the United States Army special operations forces Assistant Secretary of the Army for Acquisition, Logistics, and Technology Army Service component command air support operations center ammunition supply point antitank air traffic control Antiterrorism Enterprise Portal air tasking order Automatic Digital Network battle damage assessment begin morning nautical twilight battle position blanket purchase agreement command and control Civil Affairs
8 February 2009
FM 3-05.230
Glossary-1
Glossary
CALL CAP CARVER CAS CASCOM CASEVAC CBRN CBRNE CbT CCA CCDR CCIF CCIR CD CDE CE CERP CFL CI CIDG CJCS CJCSI CJSOTF CJTF CNM COA COIN COMSEC COMSOC CONEX CONPLAN CONUS COR COTR COTS CP CPAF CPFF CTA CTRIF
Center for Army Lessons Learned crisis action planning criticality, accessibility, recuperability, vulnerability, effect, and recognizability close air support United States Combined Arms Support Command casualty evacuation chemical, biological, radiological, and nuclear chemical, biological, radiological, nuclear, and high-yield explosives combating terrorism close combat attack combatant commander Combatant Commanders Initiative Fund commanders critical information requirement counterdrug collateral damage estimate communications-electronics commanders emergency response program coordinated fire line counterintelligence civilian irregular defense group Chairman of the Joint Chiefs of Staff Chairman of the Joint Chiefs of Staff instruction combined joint special operations task force commander, joint task force critical nodes matrix course of action counterinsurgency communications security Commander, Special Operations Command container express concept plan continental United States contracting officer representative contracting officer technical representative commercial off-the-shelf contact point cost-plus award fee cost-plus fixed fee common table of allowance Combating Terrorism Readiness Initiative Fund
Glossary-2
FM 3-05.230
8 February 2009
Glossary
CVAMP DA DA PAM DCG DCSLOG DCSOPS DD Form DEA DFAC DFARS DOD DODI DOS DS DTG DZ ECP EENT EFF ELRB EO EPA ERP EST EW FAR FDC FFA FFP FHP FID FLOT FM FNS FOO FPF FRAGORD FS FSC FSCC FSCL
Core Vulnerability Assessment Management Program Department of the Army Department of the Army pamphlet deputy commanding general deputy chief of staff for logistics deputy chief of staff for operations Department of Defense form Drug Enforcement Administration dining facility Defense Federal Acquisition Regulation Supplement Department of Defense Department of Defense instruction Department of State direct support date-time group drop zone egress control point end evening nautical twilight effective executive logistics review board electro-optical evasion plan of action en route point establish electronic warfare Federal Acquisition Regulation fire direction center free-fire area firm, fixed price force health protection foreign internal defense forward line of own troops field manual foreign nation support field ordering officer final protective fire fragmentary order fire support fire support coordinator fire support coordination center fire support coordination line
8 February 2009
FM 3-05.230
Glossary-3
Glossary
FSCM FSE FUSB FY GCC GP GPC GPS GS GSA GSB GTA GWOT HA HCA HE HIMARS HLZ HMMWV HN HP HQ HQDA HR HUMINT IAW IBE ID IED IGCE IMPAC IO IP IPBO IR ISOFAC ISR J-4 J-6 JAG JARB
fire support coordination measure fire support element facilities utilization and support board fiscal year geographic combatant commander general purpose government purchase card global positioning system general support General Services Administration group support battalion graphic training aid Global War on Terror holding area humanitarian and civic assistance high explosive high-mobility artillery rocket system helicopter landing zone high-mobility multipurpose wheeled vehicle host nation holding point headquarters Headquarters, Department of the Army human resources human intelligence in accordance with installed building equipment identification improvised explosive device independent government cost estimate international merchant purchase authorization card information operations initial point installation property book officer infrared isolation facility intelligence, surveillance, and reconnaissance logistics staff section command, control, communications, and computer systems staff section Judge Advocate General joint acquisition review board
Glossary-4
FM 3-05.230
8 February 2009
Glossary
JAT Guide JCET JFC JFE JFOB JSOTF JTAC JTF KD KO LCMR LEA LOC LOGCAP LP LRRP LZ Max MDMP MDSC MEDCAP MEDINT MEDLOG METT-TC MI MILCON Min MIPR MOS MP MRE MSS MTOE MTP MTT MWR NATO NCO NFA NGO
Joint Antiterrorism Program Managers Guide joint combined exchange training joint force commander joint fires element joint forward operating base joint special operations task force joint terminal attack controller joint task force known distance contracting officer lightweight countermortar radar law enforcement agency line of communications logistics civil augmentation program listening post long-range reconnaissance patrol landing zone maximum military decision-making process medical deployment support command medical civic action program medical intelligence medical logistics mission, enemy, terrain and weather, troops and support available, time available, and civil considerations military intelligence military construction minimum military interdepartmental purchase request military occupational specialty military police meal, ready to eat mission support site modified table of organization and equipment mission training plan mobile training team morale, welfare, and recreation North Atlantic Treaty Organization noncommissioned officer no-fire area nongovernmental organization
8 February 2009
FM 3-05.230
Glossary-5
Glossary
nm NSFS NSN NTV NVD NVG O&M OAKOC OB OGA OIF OMA OP OPA OPCEN OPCON OPLAN OPLOG OPSEC PA PACE PARC PGM PID PIR PLL PMCS POC POI POL POO PP PPBE PR&C PSYOP PWRMS PX QRF RAM RFA
nautical mile naval surface fire support National Stock Number nontactical vehicle night vision device night vision goggle operations and maintenance observation and fields of fire, avenues of approach, key terrain, obstacles, and cover and concealment order of battle other government agency Operation IRAQI FREEDOM Office of Military Affairs observation post other procurementArmy operations center operational control operation plan operational logistics operations security paying agent primary, alternate, contingency, and emergency principal assistant responsible for contracting precision-guided munition positive identification priority intelligence requirement prescribed load list preventative maintenance checks and services point of contact point of impact petroleum, oils, and lubricants point of origin penetration point Planning, Programming, Budgeting, and Execution purchase request and commitment Psychological Operations pre-positioned war reserve materiel stock post exchange quick reaction force rockets, artillery, and mortars restrictive fire area
Glossary-6
FM 3-05.230
8 February 2009
Glossary
RFL RIP ROE ROWPU RP RPG S-2 S-3 S-4 S-5 SA SACC SEAD SF SFAUC SFG(A) SFOD SFODA SFODB SFODC SIGCEN SIPRNET SJA SME SO SOC SODARS SOF SOFA SOI SOP SOR SOSCOM SOTF SOTSE SOW SPINS SPTCEN SSN SSR STP
restrictive fire line relief in place rules of engagement reverse osmosis water purifcation unit release point; rendezvous point rocket-propelled grenade intelligence staff section operations staff section logistics staff section plans staff section situational awareness supporting arms coordination center suppression of enemy air defenses Special Forces; standard form Special Forces advanced urban combat Special Forces group (airborne) Special Forces operational detachment Special Forces operational detachment A Special Forces operational detachment B Special Forces operational detachment C signals center SECRET Internet Protocol Router Network staff judge advocate subject-matter expert special operations special operations command special operations debrief and retrieval system special operations forces status-of-forces agreement signal operating instruction standing operating procedure statement of requirement special operations support command special operations task force special operations theater support element statement of work special instructions support center standard study number service, supply, and repair Soldier training publication
8 February 2009
FM 3-05.230
Glossary-7
Glossary
SWEAT-MS SWEAT-MSS T&M TACFAC TAMCA TAMMC TDY TMO TOA TOC TPFDL TRP TSC TSOC TTP UAS UBL UFR UN U.S. USACE USAF USAJFKSWCS USAR USASOC USC USCENTCOM USG USMC USN UTAMS UXO VBIED WP
sewage, water, electricity, academics, trash, medical, and security security, water, electricity, administration, trash, medical, sewage, and shelter time and materials tactical facility theater Army movement control agency theater Army material management command temporary duty transportation management office transfer of authority tactical operations center time-phased force and deployment list target reference point theater sustainment command theater special operations command tactics, techniques, and procedures unmanned aircraft system unit basic load unfunded requirement United Nations United States United States Army Corps of Engineers United States Air Force United States Army John F. Kennedy Special Warfare Center and School United States Army Reserve United States Army Special Operations Command United States Code United States Central Command United States Government United States Marine Corps United States Navy unattended transient acoustic measurement and signature intelligence system unexploded ordnance vehicleborne improvised explosive device white phosphorus
SECTION II TERMS
air support operations center The principal air control agency of the theater air control system responsible for the direction and control of air operations directly supporting the ground combat element. It processes and coordinates requests for immediate air support and coordinates air missions requiring integration with other
Glossary-8
FM 3-05.230
8 February 2009
Glossary
supporting arms and ground forces. It normally collocates with the Army tactical headquarters senior fire support coordination center within the ground combat element. Also called ASOC. (JP 1-02) air tasking order A method used to task and disseminate to components, subordinate units, and command and control agencies projected sorties, capabilities and/or forces to targets and specific missions. Normally provides specific instructions to include call signs, targets, controlling agencies, etc., as well as general instructions. Also called ATO. (JP 1-02) casualty evacuation The unregulated movement of casualties that can include movement both to and between medical treatment facilities. Also called CASEVAC. (JP 1-02) close air support Air action by fixed- and rotary-wing aircraft against hostile targets that are in close proximity to friendly forces and that require detailed integration of each air mission with the fire and movement of those forces. Also called CAS. (JP 1-02) combating terrorism Actions, including antiterrorism (defensive measures taken to reduce vulnerability to terrorist acts) and counterterrorism (offensive measures taken to prevent, deter, and respond to terrorism), taken to oppose terrorism throughout the entire threat spectrum. Also called CbT. (JP 1-02) combined joint special operations task force A task force composed of special operations units from one or more foreign countries and more than one U.S. Military Department formed to carry out a specific special operation or prosecute special operations in support of a theater campaign or other operations. The combined joint special operations task force may have conventional nonspecial operations units assigned or attached to support the conduct of specific missions. Also called CJSOTF. (JP 1-02) contact point 1. In land warfare, a point on the terrain, easily identifiable, where two or more units are required to make contact. 2. In air operations, the position at which a mission leader makes radio contact with an air control agency. 3. (DOD only) In personnel recovery, a location where isolated personnel can establish contact with recovery forces. Also called CP. (JP 1-02) contracting officer A U.S. military officer, enlisted member, or civilian employee who has a valid appointment as a contracting officer under the provisions of the Federal Acquisition Regulation. The individual has the authority to enter into and administer contracts and determinations as well as findings about such contracts. (JP 1-02) coordinated fire line A line beyond which conventional and indirect surface fire support means may fire at any time within the boundaries of the establishing headquarters without additional coordination. The purpose of the coordinated fire line is to expedite the surface-to-surface attack of targets beyond the coordinated fire line without coordination with the ground commander in whose area the targets are located. Also called CFL. (JP 1-02) cost-plus a fixed fee contract A cost-reimbursement type contract that provides for the payment of a fixed fee to the contractor. The fixed fee, once negotiated, does not vary with actual cost but may be adjusted as a result of any subsequent changes in the scope of work or services to be performed under the contract. (JP 1-02) evasion plan of action A course of action, developed prior to executing a combat mission, that is intended to improve a potential isolated persons chances of successful evasion and recovery by providing the recovery
8 February 2009
FM 3-05.230
Glossary-9
Glossary
forces with an additional source of information that can increase the predictability of the evaders action and movement. Also called EPA. (JP 1-02) final protective fire An immediately available prearranged barrier of fire designed to impede enemy movement across defensive lines or areas. (JP 1-02) fire direction center That element of a command post, consisting of gunnery and communications personnel and equipment, by means of which the commander exercises fire direction and/or fire control. The fire direction center receives target intelligence and requests for fire, and translates them into appropriate fire direction. The fire direction center provides timely and effective tactical and technical fire control in support of current operations. Also called FDC. (JP 1-02) fire support Fires that directly support land, maritime, amphibious, and special operations forces to engage enemy forces, combat formations, and facilities in pursuit of tactical and operational objectives. (JP 1-02) fire support coordination center A single location in which are centralized communications facilities and personnel incident to the coordination of all forms of fire support. Also called FSCC. (JP 1-02) fire support coordination line A fire support coordination measure that is established and adjusted by appropriate land or amphibious force commanders within their boundaries in consultation with superior, subordinate, supporting, and affected commanders. Fire support coordination lines facilitate the expeditious attack of surface targets of opportunity beyond the coordinating measure. A fire support coordination line does not divide an area of operations by defining a boundary between close and deep operations or a zone for close air support. The fire support coordination line applies to all fires of air, land, and sea-based weapon systems using any type of ammunition. Forces attacking targets beyond a fire support coordination line must inform all affected commanders in sufficient time to allow necessary reaction to avoid fratricide. Supporting elements attacking targets beyond the fire support coordination line must ensure that the attack will not produce adverse effects on, or to the rear of, the line. Short of a fire support coordination line, all air-to-ground and surface-to-surface attack operations are controlled by the appropriate land or amphibious force commander. The fire support coordination line should follow well-defined terrain features. Coordination of attacks beyond the fire support coordination line is especially critical to commanders of air, land, and special operations forces. In exceptional circumstances, the inability to conduct this coordination will not preclude the attack of targets beyond the fire support coordination line. However, failure to do so may increase the risk of fratricide and could waste limited resources. Also called FSCL. (JP 1-02) fire support element That portion of the force tactical operations center at every echelon above company or troop (to corps) that is responsible for targeting coordination and for integrating fires delivered on surface targets by fire support means under the control, or in support, of the force. Also called FSE. (JP 1-02) force health protection Measures to promote, improve, or conserve the mental and physical well-being of Service members. These measures enable a healthy and fit force, prevent injury and illness, and protect the force from health hazards. Also called FHP. (JP 1-02) free-fire area A specific area into which any weapon system may fire without additional coordination with the establishing headquarters. Also called FFA. (JP 1-02) humanitarian and civic assistance Assistance to the local populace provided by predominantly U.S. forces in conjunction with military operations and exercises. This assistance is specifically authorized by Title 10, United States Code,
Glossary-10
FM 3-05.230
8 February 2009
Glossary
Section 401 and funded under separate authorities. Assistance provided under these provisions is limited to (1) medical, dental, and veterinary care provided in rural areas of a country; (2) construction of rudimentary surface transportation systems; (3) well drilling and construction of basic sanitation facilities; and (4) rudimentary construction and repair of public facilities. Assistance must fulfill unit training requirements that incidentally create humanitarian benefit to the local populace. Also called HCA. (JP 1-02) intelligence, surveillance, and reconnaissance An activity that synchronizes and integrates the planning and operation of sensors, assets, and processing, exploitation, and dissemination systems in direct support of current and future operations. This is an integrated intelligence and operations function. Also called ISR. (JP 1-02) joint combined exchange training A program conducted overseas to fulfill U.S. forces training requirements and at the same time exchange the sharing of skills between U.S. forces and host nation counterparts. Training activities are designed to improve U.S. and host nation capabilities. Also called JCET. (JP 1-02) joint fires element An optional staff element that provides recommendations to the operations directorate to accomplish fires planning and synchronization. Also called JFE. (JP 1-02) joint special operations task force A joint task force composed of special operations units from more than one Service, formed to carry out a specific special operation or prosecute special operations in support of a theater campaign or other operations. The joint special operations task force may have conventional non-special operations units assigned or attached to support the conduct of specific missions. Also called JSOTF. (JP 1-02) joint terminal attack controller A qualified (certified) Service member who, from a forward position, directs the action of combat aircraft engaged in close air support and other offensive air operations. A qualified and current joint terminal attack controller will be recognized across the Department of Defense as capable and authorized to perform terminal attack control. Also called JTAC. (JP 1-02) mobile training team A team consisting of one or more U.S. military or civilian personnel sent on temporary duty, often to a foreign nation, to give instruction. The mission of the team is to train indigenous personnel to operate, maintain, and employ weapons and support systems, or to develop a self-training capability in a particular skill. The Secretary of Defense may direct a team to train either military or civilian indigenous personnel, depending upon host-nation requests. Also called MTT. (JP 1-02) no-fire area An area designated by the appropriate commander into which fires or their effects are prohibited. Also called NFA. (JP 1-02) National Stock Number The 13-digit stock number replacing the 11-digit Federal Stock Number. It consists of the 4-digit Federal Supply Classification code and the 9-digit National Item Identification Number. The National Item Identification Number consists of a 2-digit National Codification Bureau number designating the central cataloging office (whether North Atlantic Treaty Organization or other friendly country) that assigned the number and a 7-digit (xxx-xxxx) nonsignificant number. The number shall be arranged as follows: 9999-00-999-9999. Also called NSN. (JP 1-02) naval surface fire support Fire provided by Navy surface gun and missile systems in support of a unit or units. Also called NSFS. (JP 1-02)
8 February 2009
FM 3-05.230
Glossary-11
Glossary
nongovernmental organization A private, self-governing, not-for-profit organization dedicated to alleviating human suffering; and/or promoting education, health care, economic development, environmental protection, human rights, and conflict resolution; and/or encouraging the establishment of democratic institutions and civil society. Also called NGO. (JP 1-02) order of battle The identification, strength, command structure, and disposition of the personnel, units, and equipment of any military force. Also called OB. (JP 1-02) other government agency Within the context of interagency coordination, a non Department of Defense agency of the United States Government. Also called OGA. (JP 1-02) relief in place An operation in which, by direction of higher authority, all or part of a unit is replaced in an area by the incoming unit. The responsibilities of the replaced elements for the mission and the assigned zone of operations are transferred to the incoming unit. The incoming unit continues the operation as ordered. (JP 1-02) restrictive fire area An area in which specific restrictions are imposed and into which fires that exceed those restrictions will not be delivered without coordination with the establishing headquarters. Also called RFA. (JP 1-02) restrictive fire line A line established between converging friendly surface forces that prohibits fires or their effects across that line. Also called RFL. (JP 1-02) supporting arms coordination center A single location on board an amphibious command ship in which all communication facilities incident to the coordination of fire support of the artillery, air, and naval gunfire are centralized. This is the naval counterpart to the fire support coordination center utilized by the landing force. Also called SACC. (JP 1-02) suppression of enemy air defenses Activity that neutralizes, destroys, or temporarily degrades surface-based enemy air defenses by destructive and/or disruptive means. Also called SEAD. (JP 1-02) tactical facility Any secure urban or rural facility that enables Army special operations forces to extend command and control, provides support for operations, and allows operational elements to influence a specified area. Special Forces tactical facilities include a variety of secure locations for Special Forces operations, including (but not limited to) firebases, camps, and team houses. Also called TACFAC. time-phased force and deployment list Appendix 1 to Annex A of the operation plan. It identifies types and/or actual units required to support the operation plan and indicates origin and ports of debarkation or ocean area. It may also be generated as a computer listing from the time-phased force and deployment data. Also called TPFDL. (JP 1-02)
Glossary-12
FM 3-05.230
8 February 2009
References
Army Publications
DA Form 1355-1 (Hasty Protective Row Minefield Record) DA Form 3953 (Purchase Request and Commitment [PR&C]) DA Form 5517-R (Standard Range Card) Note: DA forms are available on the APD Web site (www.apd.army.mil). DA PAM 420-11, Facilities Engineering Project Definition & Work Classification, 7 October 1994. FM 3-0, Operations, 27 February 2008. FM 3-07, Stability Operations, 6 October 2008. FM 3-09.32, (JFIRE) Multiservice Tactics, Techniques, and Procedures for the Joint Application of Firepower, 20 December 2007. FM 3-19.1, Military Police Operations, 22 March 2001. FM 5-0, Army Planning and Orders Production, 20 January 2005. FM 5-34, Engineer Field Data, 19 July 2005. GTA 31-01-003, Detachment Mission Planning Guide, 1 March 2006. GTA 41-01-005, Religious Factors Analysis, 2 January 2008. STP 31-18C34-SM-TG, Soldiers Manual and Trainers Guide, MOS 18C, Special Forces Engineer Sergeant Skill Levels 3 and 4, 8 July 2003.
Joint Publications
CJCSI 7401.01D, Combatant Commander Initiative Fund, 30 September 2008. JP 1-02, Department of Defense Dictionary of Military and Associated Terms, 12 April 2001. JP 3-09.3, Joint Tactics, Techniques, and Procedures for Close Air Support (CAS), 3 September 2003.
Other Publications
DD Form 1155 (Order for Supplies or Services) DD Form 1391 (Military Construction Project Data) DD Form 1972 (Joint Tactical Air Strike Request) Note: DD forms are available on the OSD Web site (www.dtc.mil/whs/directives/infomgt/ forms/formsprogram.htm). DODI 2000.16, DoD Antiterrorism (AT) Standards, 2 October 2006. SF 33 (Solicitation, Offer, and Award) SF 44 (U.S. Government Purchase Order Invoice Voucher) Note: The images depicted in Figure 2-8 (page 2-11), Figure 2-9 (page 2-15), and Figure 3-1 (page 3-3) are copyrighted. They are used in this publication with permission of the copyright holder, Osprey Publishing.
8 February 2009
FM 3-05.230
References-1
Index
A
access road, 1-8, 1-10, 2-3, 2-12, 2-22, 2-24 administration area, 2-3 administration sector, 1-1, 1-3, 1-4, 1-8, 1-10, 2-3, 2-7, 2-9, 2-19, 2-22, 2-24, 5-8 airfield, 2-19, 2-21, 2-24, 2-25, 3-7, 3-8 airspace coordination area, 4-19, 4-20 ammunition bunkers, 2-10, 2-14, 2-15, 3-11 ammunition crates, 2-10, 3-10 area assessment, 2-1, 2-2, C-1 through C-9 initial, C-1 preventative medicine, C-4 principal, C-1 area study, 2-1, 7-3, A-1 through A-5, C-1 automatic resupply, 5-7 CONEX, 2-10, 2-15, 3-11 construction fighting trenches, 3-5 floors, 3-1 machine-gun bunkers, 3-2 mortar positions, 3-2 observation towers, 3-4 roof, 3-2 walls, 3-1 contact point, 4-16 contracting officer technical representative, 6-11 coordinated fire line, 4-18 crisis action planning, 5-8 critical nodes matrix, 1-3, 1-4 government purchase card, 6-15 group support battalion, 5-4 through 5-6, 5-8
H
helicopter landing zone, 1-5, 1-12, 2-19, 2-21, 3-8 holding area, 4-17 hostile environment, 2-3, 4-2 human resource, 5-1, 5-6 humanitarian and civic assistance, 6-10
I
independent government cost estimate, 6-1 through 6-4 initial phase, 1-4, 1-12 initial point, 4-11, 4-16 inner barrier, 2-3 inner perimeter, 1-10, 2-3, 2-6, 2-7, 2-10 through 2-12, 2-14, 2-17, 2-18 installation property book officer, 6-2 international merchant purchase authorization card, 6-14 ISOFAC, 2-7 isolation facility, 5-13
D
dining facility, 1-8, 2-14, 2-18, 5-5, 5-9, 5-10, 5-13, 6-5, B-3 dispensary, 1-5, 1-12, 2-9 through 2-21
E
egress control point, 4-16, 4-17 emergency resupply, 5-7 emergency signal, 2-12, 3-12 en route point, 4-16 evasion plan of action, 7-3, 7-6, B-1
B
Brick and masonry, 3-9
C
cache, 5-8 Center for Army Lessons Learned, 2-2 cinder block, 3-11 Cinva-Ram, 2-7, 3-12 classes of supply, 5-2, 5-8 claymore mines, 1-10, 2-13 close air support, 4-1, 4-3 through 4-5, 4-10 through 4-17 close combat attack, 4-3 through 4-5, 4-10 through 4-17 closeout, 7-6, 7-7 Combatant Commander's Initiative Fund, 6-10 combating terrorism, 6-9 commander's emergency response program, 6-5, 6-6 concept plan, 5-8 concrete, 3-1, 3-6 through 3-8, 6-5
F
fencing, 2-6, 2-7, 2-12, 2-14, 3-8, 3-12 field ordering officer, 6-1, 6-2, 6-11, 6-13 field services, 5-3 fighting bunker, 2-14 fire arrow, 2-12, 3-12 fire support coordination line, 4-18, 4-19 fire support coordination measure, 4-10, 4-16, 4-18 force health protection, 5-1, 5-6 free-fire area, 4-19 fuel point, 2-14, 2-18
J
joint acquisition review board, 6-1 through 6-3, 6-11 joint combined exchange training, 5-5 joint fires, 4-3 joint special operations area, 5-7, 5-8 joint special operations task force, 5-1, 5-2, 5-5, 5-6, 7-6 joint terminal air controller, 4-5, 4-10 through 4-14, 4-16, 4-17
L
latrine, iii, 1-7, 1-8, 2-11, 3-10 line of communications, 2-14
G
generator bunkers, 2-9, 2-10 government building, 2-19, 2-21
8 February 2009
FM 3-05.230
Index-1
Index
M
main gate, 2-19, 2-22 through 2-24 main road, 2-24, 2-25 main-gate bunkers, 2-23 maintenance, 1-10, 1-13, 2-1, 2-9, 2-10, 2-12, 2-14, 2-18, 4-1, 5-1 through 5-6, 5-9, 5-11 through 5-13, 5-15, 6-5 through 6-7, 6-9 medical bunker, 2-9 military construction, 6-6 through 6-9 military decision-making process, 2-1, 2-2, 7-6 military interdepartmental purchase request, 6-4 mobile training team, 5-5 mortar positions, 2-10 motor pool, 2-14, 2-18
paying agent, 6-1, 6-2, 6-11, 6-13 perimeter road, 2-12, 2-24 permanent phase, 1-10, 1-13 permissive environment, 4-2 petroleum, oils, and lubricants, 5-7, 5-8, 5-10, 5-11, 6-12, A-5, C-3 Purchase Request and Commitment, 6-1 through 6-4, 6-13
statement of work, 6-1 through 6-4, 6-7, 6-12 steel drums, 3-10, 3-11 support center, 2-1, 5-1, 5-13 suppression of enemy air defenses, 4-14 surrounding area, 1-8, 1-10, 2-3, 2-19, 2-21, 2-22, 2-24, 2-25
T
tactical operations center, 2-3, 2-17 tanglefoot, 1-10, 2-12 temporary phase, 1-8, 1-13 threat level, 4-2 Title 10, United States Code, 5-8, 6-5 transfer of authority, 7-1 trash point, 2-12, 2-18
R
radar, 1-4, 4-6, 4-7 through 4-9 restrictive fire area, 4-19 restrictive fire line, 4-19 rock, 3-8, 3-9, 3-11, A-2 rules of engagement, 2-13, 4-2, 4-10, 4-13, 4-16 rural tactical facilities, v, 1-2 through 1-4, 1-6 through 1-8, 1-10, 1-12, 1-13, 2-3, 2-6, 2-16, 2-25, 3-1, 3-7, 3-12, 7-5, 7-6, A-2, A-4, C-6
N
no-fire area, 4-19
U
uncertain environment, 4-2 undeveloped theater, 5-5, 5-6 unfunded requirement, 6-9 unmanned aircraft system, 4-9, 4-10 urban tactical facilities, 1-12, 7-4, 7-6
O
observation towers, 2-16, 3-4, 3-5 Office of Military Affairs, 6-6 on-call resupply, 5-7 operation plan, 5-1, 5-8 operations center, 1-8, 2-1, 2-3, 2-7, 5-13 other procurementArmy, 6-6, 6-7 outer barrier, 1-10, 2-3 outer perimeter, 2-3, 2-14, 2-17
S
sandbags, 2-7, 2-9, 2-10, 2-15, 2-19, 2-21, 3-1, 3-2, 3-5, 3-8, 3-9, 3-10, 3-11, 5-8 signals center, 2-1, 5-13 site survey, 2-1, 2-2, B-1 special operations debrief and retrieval system, 2-1, 2-2 special operations theater suppoirt element, 5-8 stackable barrier system, 1-5, 1-10 staff judge advocate, 6-4, 6-6, 6-8, 6-9, 6-11, 6-13, 6-15 statement of requirement, 2-1, 5-1, 5-6, 5-8
V
vehicle revetments, 2-11 vehicleborne improvised explosive device, 7-5
W
water point, 2-18 weapons range, 2-18 wood, 3-1, 3-6, 3-7, 3-9
P
pallets, 2-10, 2-15, 3-1, 3-8, 3-10, 3-11
Index-2
FM 3-05.230
8 February 2009
FM 3-05.230
8 February 2009
Official:
DISTRIBUTION: Active Army, Army National Guard, and U.S. Army Reserve: To be distributed in accordance with the initial distribution number (IDN) 115905, requirements for FM 3-05.230.
PIN: 080972-000