2013 Olympic Arms Retail Catalog
2013 Olympic Arms Retail Catalog
2013 Olympic Arms Retail Catalog
2013
RETAIL CATALog
Q: Can I order that model with a flat top upper? A: YES! Any Olympic Arms model that has an A2 upper can be ordered as a flat top upper at no additional cost. For models standard with a flat top upper you can order them as A2 uppers, again at no additional cost. Q: Are olympic Arms receivers forged or cast? A: Aluminum Forgings! Olympic Arms Inc. exclusively uses 7075 T6 Aluminum forgings for our upper and lower receivers. The receivers are machined by Olympic Arms in our machine shop.
Company History
Olympic Arms, Inc. was founded by Robert C. Schuetz, and began as Schuetzen Gun Works (SGW) in 1956, manufacturing barrels in Colorado Springs, Colorado. Prior to that Mr. Schuetz had been partnered in business with well known gunsmith P.O. Ackley. In 1975 the company moved to Olympia, Washington, and while its business in rifle barrels and barrel blanks thrived, it also began manufacturing complete custom bolt-action rifles. In 1982, Schuetzen Gun Works began to manufacture AR15/M16 rifles and components under the trade name of Olympic Arms, Inc, while custom bolt action rifles continued to be produced under the SGW brand. In 1987 the company purchased Arizona-based M.S. Safari, adding the M1911 pistol to its lineup under the name Safari Arms. Olympic was the first to introduce features now seen as commonplace on the AR15 platform. It was the first company to produce flat-top upper receivers, free floating aluminum hand guards, pistol caliber conversions, and AR-15 based pistols. Olympic also manufactures many AR-15s in calibers other than the standard 5.56x45mm. Olympic was the first in the industry to offer AR15 style firearms in 9x19mm and .45 ACP, 10mm, 7.62x39, and the Winchester Super Short Magnum cartridges. Olympic Arms is one of the few AR15 manufacturers to make every major component part in-house. They have been found to constantly meet the rigid specifications of military, government and law enforcement agency contracts. Olympic Arms has provided firearms for Law Enforcement and Government agencies around the globe, including every branch of the U.S. Armed Forces.
Definition of Abbreviations
Abbreviation Description Flat top upper receiver with picatinny rails. Standard on some models. Any A2 upper can be ordered as a flat top for no additional cost. Standard upper receiver with an A2 rear sight. The fully adjustable rear sight includes both windage and elevation adjustment with two apertures. Flat top upper receiver with picatinny rails. Includes a detachable carry handle. The carry handle features an A2 rear sight. Upper receiver (aka Top End Assembly) unit. This is just the top half of a complete model. Does not include the lower receiver or any parts attached to it. Sometimes includes a magazine or other parts. Stainless Ultramatch barrel. These are our top of the line barrels. They are broach-cut from 416 stainless steel bar stock with 4 lands and 4 grooves to minimum SAAMI specifications.
Matchmaster 5 Enforcer / Cohort Big Deuce / Trail Boss Westerner Constable / Journeyman / Street Deuce
FT A2 A3 UR
All receivers are 7075 T6 Aluminum Forgings. Machined by Olympic Arms in our machine shops!
This product catalog is 2013 Olympic Arms, Inc. and may not be reproduced. Prices and specifications are considered accurate at the time of printing. Prices and specifications are subject to change without notice. Not all products, including new products, are listed in this product catalog. To qualify for Dealer pricing you must be an approved dealer of Olympic Arms products and we must have your current FFL on file.
SUM
Additional information can be found on our web site: www.olyarms.com in the FAQs and Support sections.
PRICES AND SPECS MAY CHANGE | OLYARMS.COM | 800-228-3471
general Information
ordering Instructions We take pride in our customer service team, which consists of the most courteous and knowledgeable staff in the industry. Our sales offices and customer service team can be reached Monday through Friday, from 7:00 a.m. until 4:00 p.m. Pacific Standard Time. Phone (800) 228 - 3471 Fax (360) 491 - 3447 www.olyarms.com for 24/7 Ordering Direct Retail Sales Olympic Arms has a retail storefront that is open to the public Monday through Friday, from 8:00 a.m. until 4:30 p.m. Pacific Standard Time. Firearms can be purchased directly from Olympic Arms by Washington State residents, and qualified buyers from out of State. All Federal, State and Local laws apply. How To order A retail customer is any individual who is not a Federal Firearms Licensed (FFL) Dealer. All retail customer orders are accepted by telephone, mail, fax, or e-mail. Customers can also order certain items from our online store (visit our website for details). Orders must include: full name with shipping address (PO Box addresses are NOT accepted), day time and business phone and fax numbers if available, a method of payment arrangement, and a complete description of the products ordered to include item and/or stock numbers. Dealer orders will NOT be accepted under the name of anyone other than those people who are named on the FFL or those not designated by the Licensee. No exceptions to these policies will be made. Shipping And Handling Fees Shipping and handling fees are a flat rate based on the dollar value of the contents of each box or package shipped. Please be advised that it may not be possible to ship all orders in one box, meaning that one order may have multiple shipping charges based on the size, shape, weight and dollar value of the contents of the box. Shipping and handling charges are taxable to Washington State residents. The scale for determining per box/package shipping and handling charges is as follows: $0.01 - $99.99 $9.95 $100.00 - $499.99 $19.95 $500.00 - 999.99 $28.95 $1000.00 & Up $42.95 COD $15.00 Extra per package requiring COD label. Methods of Payment We accept COD (Certified funds meaning Bank Check or Postal Money Order), credit card (currently Master Card, Visa and Discover only) and DO NOT ACCEPT pre-paid orders. To receive a COD Company Check OK status, a bank reference must first be filed with the Olympic Arms accounting department. At the time of a bank reference filing a COD Check OK account MAY be approved for future shipments pending approval by our accounting department. Credit card accounts are not charged until the order is shipped. Sales Tax in Washington State is based on destination of sale (whatever your local sales tax is.) Sales Tax in our store front is 7.9%. Sales taxes for Washington state orders are waived if a Washington State Resellers Permit is on file with our accounting department. Olympic Arms is not responsible for refunding collected Sales tax to a qualified company if a Resale Permit was not on-file at the time of the order. The Olympic Arms accounting department does NOT offer open accounts of any type. Returns Returns must first be approved by our Customer Service Team and a Return Authorization Number will be assigned. To avoid time and processing delays, please do not return any product to Olympic Arms before first contacting our customer service team. All returns must be sent to: Olympic Arms, Inc. Att: Returns & Repairs 624 Old Pacific Hwy SE Olympia, WA 98513 Please be sure that you include a personal and company name, a return address (PO Box addresses are NOT accepted), a daytime phone number, a copy of the original invoice, as well as a letter detailing the reason for the return. All of these items must be included with a return to ensure prompt processing of a returned item. No CLASS III returns or repairs can be accepted without prior notification and proper ATF transfer. All CLASS III items sent to Olympic Arms without advance notification and the proper ATF forms will be IMMEDIATELY returned to the sender. Restocking Fee All refused or retuned shipments without prior authorization are subject to payment of all shipping charges incurred by Olympic Arms, as well as a fifteen percent (15%) restocking fee. Please be sure to call to determine if a RETURN AUTHORIZATION NUMBER is required before you return any product to us. Olympic Arms is bound by all federal laws applicable to the products we manufacture and sell, including the legal transfer of such weapons. Please contact our customer service staff during business hours for confirmation of procedures. Export/Foreign Customers Due to international law, the Olympic Arms Limited Lifetime Warranty only applies within the continental United States, Alaska and Hawaii. All foreign customers must seek advice for service through their importer. Lifetime Warranty
Warranty Information
Our goal at Olympic Arms, Inc. (OAI, we and us) is to lead the industry in customer service and satisfaction. For this reason, we are proud to offer the most comprehensive factory warranty of its kind by any AR-15 manufacturer. We will warranty all parts and products manufactured by OAI against any and all manufacturers defects in materials and workmanship, which effect the satisfactory operation of the item being warranted. This portion of the warranty is nontransferable. The liability of OAI is limited to repair or replacement of only those parts determined by our staff to be defective on the part of the factory. The decision to repair or replace a warranted product will be made by OAI as necessary to provide the customer with a properly operating finished product. OAI assumes no liability for accidental or consequential damages. The following items are specifically excluded from coverage under this warranty: 1. Normal wear of the protective finishes and of all metal or plastic parts. 2. Damage or malfunction resulting from accident, negligence, misuse, or unauthorized repair or alteration. 3. Damage or malfunction resulting from barrel obstructions. 4. Damage or malfunction resulting from use of other than factory SAAMI specification brass cased new production ammunition. 5. Damage resulting from the use of ANY imported, hand loaded, reloaded, or factory re-manufactured ammunition. 6. Any finished products that are NOT assembled at the factory, or are assembled using imported, used, or non-Olympic Arms parts. This includes completed rifle kits, pistol kits, upper receivers, lower receivers, barrel units / assemblies, etc. 7. Any damage to OAI parts or components during assembly by an individual, organization, company, or entity other than OAI. This Warranty only applies to product sold within the continental United States, Alaska or Hawaii. Satisfaction guarantee Beyond warranty, Olympic Arms, Inc. (OAI, we and us) guarantees complete customer satisfaction. If you are not completely satisfied with the purchase of any OAI product based on any product or warranty related reason*, simply return it to us within sixty (60) days along with a copy of the original invoice from Olympic Arms, and we will replace the item, or credit or refund** the original purchase price (to be determined by OAI). Restrictions apply, see below. *Product or warranty related reason is defined as any warranty or service/repair issue, or deficiency in the advertised performance of the product in question. It does not apply to dealers and/or individuals who, after having received the product feel as though a different product would be better suited for their needs. In cases such as this, exchanges can be made on new, unfired, products returned in their original packaging along with a copy of the original sales invoice. A restocking fee (currently 15%) may apply. **Refunds are made on returns based on our advertised Lifetime Warranty and/or Satisfaction Guarantee. All credit card purchases made directly from Olympic Arms will be refunded to the credit card on which the original purchase was made. Cash purchases, or COD orders will be refunded via an Olympic Arms company check to be issued no earlier than five (5) business days after the returned product has been received. Shipping and handling charges are not refunded unless the product returned is determined to have been defective from the time it left OAI and are not refunded or credited on non-warranty related exchanges. No exceptions. If your purchase was made through an OAI retailer/dealer, then they (the retailer/dealer) have the option to return the product to OAI for a replacement, credit, or refund of the original purchase price as well. OAI does not dictate the in-store policies of OAI retailers/dealers. Check with your retailer/dealer for their policy before purchasing. Warranty Repair All returns for warranty repair must be shipped to the address specified in the Returns section. Determination as to whether the problem with the returned product is covered under warranty will be made after it is inspected by the expert technical staff of Olympic Arms. Due to the fact that many products returned for warranty reasons do not qualify under the warranty, the customer is responsible for shipping costs in returning products for inspection. If once inspected the product returned in fact qualifies for repair under the Olympic Arms Warranty, reasonable shipping costs will be refunded to the customer if a copy of the receipt for the shipping costs incurred can be provided.
Production Models
The following models are from our Production Line. Production Models are defined as our regularly produced models that are in a regular state of production. While it is our goal to have production such that it meets demand as closely as possible in order to keep wait times to a minimum, this is not always the case. Back orders up to and occasionally exceeding 90 days are not untypical. The AR15 products included in the Production Models lineup can only be ordered through the existing Olympic Arms Distribution network, and ARE NOT available as a direct purchase item from dealers not already on-file with Olympic Arms. A list of the available resellers included in the Olympic Arms distribution Network is made available on the Olympic Arms web site, or can be emailed by contacting info@ olyarms.com.
K3B-M4-A3-TC
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc: Forged flat top w/ detachable carry handle Elevation adjustable post w/ bayonet lug Free floating aluminum tube w/ rails 16 M4, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor M4, 6-point collapsible 32.25 / 6.77 lbs Includes detachable carry handle as shown. Retail Complete Firearm Upper Receiver Assembly $1,246.70 $796.90
Targetmatch Pantograph:
K8
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc: Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ knurling 20 bull, button rifled, 416 stainless steel 5.56 nato, 6.8 SPC, .204 Ruger Long-life non-chromed bore 1x9 [optional 1x8] Crowned A2 w/ trapdoor 38.5 / 8.5 lbs Included upgrades: Targetmatch pantograph and a satin bead blast finish on barrel. Retail Complete Firearm Upper Receiver Assembly K8204 (K8 in .204 Ruger) K8204 Upper Receiver Assembly K868 (K8 in 6.8 SPC) K868 Upper Receiver Assembly $908.70 $560.30 $967.20 $648.70 $1033.50 $598.00
UM-1P
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc: Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ knurling 24 bull, Ultramatch, 416 stainless steel .223 Remington, minimum SAAMI spec Long-life non-chromed bore 1x10 [optional 1x8] Crowned A2 w/ trapdoor 42.25 / 9.46 lbs Premium model includes Williams Set Trigger, AC4-NA buffer, Harris S-series bipod installed, ERGO tactical grip, ERing and EXring parts. Retail Complete Firearm Upper Receiver Assembly $1,623.70 N/A
K8-MAG
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc: Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ knurling 24 bull, Ultramatch, 416 stainless steel WSSM .223, .243 or .25 [also .300 OSSM] Long-life non-chromed bore 1x10 [optional 1x8*] Crowned A2 w/ trapdoor 38.25 / 9.41 lbs Chambered for the Winchester Super Short Magnum cartridges. Includes one 5 round WSSM magazine. Retail Complete Firearm Upper Receiver Assembly $1,363.70 $895.70
K30R
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc:
7.62 x 39mm
Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite carbine length caps 16, button rifled, 416 stainless steel 7.62 x 39mm Long-life non-chromed bore 1x10 A2 flash suppressor M4, 6-point collapsible 31.5 / 6.77 lbs Includes one magazine hicap magazine. Retail Complete Firearm $973.70 $588.90
K16 - 5.56 NATO K30R16 - 7.62x39 K1668 - 6.8 SPC K16-300 - 300 AAC Blackout
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight:
K16 Models
Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ knurling 16 bull, button rifled, 4140 chromemoly steel 5.56 nato, 6.8 SPC, 7.62x39, 300 AAC Blackout Long-life non-chromed bore 1x9 crown A2 w/ trapdoor 34.375 / 7.47 lbs Retail $829.00 $533.00 $890.50 $618.80 $890.50 $591.50 $890.50 $591.50
Complete Firearm Upper Receiver Assembly K30R16 (K16 in 7.62x39) Upper Receiver Assembly 7.62x39 K1668 (K16 in 6.8 SPC) Upper Receiver Assembly 6.8 K16-300(K16 in 300 AAC Blackout) Upper Receiver Assembly 300 AAC
$687.70 N/A
K23PRSA
K23P
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A2 w/ fully adjustable rear sight Elevation adjustable post, no bayonet lug Free floating aluminum tube w/ knurling 6.5, button rifled, 4140 chromemoly steel 5.56 nato Long-life non-chromed bore 1x7 A2 flash suppressor None available 22.25 / 5.12 lbs Retail Complete Firearm Upper Receiver Assembly K23PRSA Recoil Spring Assembly $975.00 $541.10 $41.60
$713.70 N/A
10
11
Specialty
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc:
LTF-Predator
Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ rails 16, button rifled, 4140 chromemoly steel 5.56 NATO, 6.8 SPC, .204 Ruger 7.62x39 Long-life non-chromed bore 1x9 A2 flash suppressor ACE FX skeleton stock 35.5 / 6.44 lbs Includes an ERGO grip full length barrel fluting. Camo Version on page 34 Retail
$1,240.20 $843.70
Multiple Aperture Sight System +148.20 *Upper Receiver Only Available in black
12
13
K3B
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A2 w/ fully adjustable rear sight Or Forged flat top w/ picatinny rails Elevation adjustable post w/ bayonet lug Fiberite carbine length caps 16, button rifled, 4140 chromemoly steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor M4, 6-point collapsible 31.75 / 6.77 lbs Retail Complete Firearm Upper Receiver Assembly $1,006.20 $526.50
K3B-M4
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite carbine length M4 w/ heat shield 16 M4, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor M4, 6-point collapsible 32.25 / 6.34 lbs Retail Complete Firearm Upper Receiver Assembly $1,103.70 $588.90
Specialty
Specialty
Flat Top available at no extra charge! Flat Top available at no extra charge!
Specialty
K3B-CAR
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite carbine length caps 11.5, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 5.5 permanently attached A1 flash suppressor M4, 6-point collapsible 31.75 / 6.03 lbs Retail Complete Firearm Upper Receiver Assembly $1,033.50 $598.00 Complete Firearm Upper Receiver Assembly Retail $1,253.20 $691.00
ML-2
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc: Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ knurling 16 bull, Ultramatch, 416 stainless steel .223 Remington, minimum SAAMI spec Long-life non-chromed bore 1x10 [optional 1x8] Crowned A2 w/ trapdoor 34.375 / 7.47 lbs Includes a factory trigger job.
Specialty
14
15
K3B-FAR
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite carbine length caps 16 FAR, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor M4, 6-point collapsible 30.5 / 6.03 lbs Retail Complete Firearm Upper Receiver Assembly $1,071.20 $559.00
Complete Firearm Upper Receiver Assembly K4B68 - 6.8 SPC Upper Receiver Assembly 6.8
Specialty
Flat Top available at no extra charge!
Specialty
Flat Top available at no extra charge!
K7 Eliminator
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc: Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite rifle length caps 16, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor A2 w/ trapdoor 31.5 / 6.80 lbs This model has a 16 barrel with the sight radius of a 20 barrel. Gas block is concealed under handguards. Retail Complete Firearm Upper Receiver Assembly $1,038.70 $553.80
Specialty
K74
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite M4 carbine length caps 16, button rifled, 416 stainless steel 5.45x39 Russian Long-life non-chromed bore 1x8 A2 flash suppressor M4 6 position collapsing stock 31.75 / 6.77 lbs Retail Complete Firearm Upper Receiver Assembly $1,058.20 $608.40
Specialty
16
17
Plinker Plus 20
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged A1 w/ windage only adjustment Elevation adjustable post w/ bayonet lug Fiberite rifle length caps 20, button rfiled, 4140 chromemoly steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor A2 w/ trapdoor 39.75 / 8.46 lbs Retail Complete Firearm Upper Receiver Assembly $908.70 N/A
OA-93
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged flat top w/ OA integrated recoil system None available Free floating aluminum tube w/ knurling 6.5, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x7 Phantom flash suppressor None available 17.00 / 4.46 lbs Retail Complete Firearm Upper Receiver Assembly Oly Arms Rail Sight $1,267.50 $903.50 $107.00
Specialty
OAS
Specialty
Flat Top available at no extra charge!
K68
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc:
6.8 Remington
Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite M4 carbine length caps 16 M4, button rifled, 416 stainless steel 6.8 Remington / SPC Long-life non-chromed bore 1x10 A2 flash suppressor M4, 6-point collapsible 31.75 / 6.62 lbs Uses the 6.8 Remington / SPC cartridge. Includes one hicap magazine. Also available with 20 barrel. Retail Complete Firearm $1,103.70 $637.00
K9-GL, K40-GL
Specialty
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc:
Forged A2 w/ fully adjustable rear sight Elevation adjustable post w/ bayonet lug Fiberite carbine length caps 16, button rifled, 416 stainless steel 9mm or 40 S&W Long-life non-chromed bore 1x16 Pistol cal flash suppressor M4, 6-point collapsible 31.75 / 6.86 lbs This model uses Glock magazines. The flash suppressor is made by Olympic Arms and the type depends on caliber and barrel threads. A magazine is not included. Retail Complete Firearm $1,157.00 $674.00
Specialty
18
19
Code FT A2 A3 FTJ 2ST WST H12-30 H12WSSM HBP-1 HBP-1-GI HBP-S HBP-S-GI BPM BPS HBP#5 SS GB MB +24 +F F2C M4S F8A F7A F8R F7R F23R F3ESG F10 T30AM4 T32 T32S T32UL T32ULS MARS DFS MASS YHM9394
MSRP $0.00 $0.00 $104.00 $42.00 $136.50 $193.70 $24.70 $38.94 $84.50 $97.50 $120.90 $133.90 $25.03 $26.00 $15.60 $52.00 $49.40 $34.78 $49.40 $97.50 $45.00 $24.70 $49.40 $59.80 $128.70 $167.70 $110.50 $26.00 $61.10 $96.20 $113.10 $97.50 $108.88 $115.70 $96.20 $71.50 $148.20 $84.00 CALL
Description Forged flat top upper receiver with picatinny rails Forged A2 upper receiver with fully adjustable rear sight Forged flat top upper receiver with picatinny rails and detachable carry handle Factor trigger job (FTJ is standard on UM, SM) Two-stage trigger Williams set trigger (WST is standard on UM-1P models) [Not available on all models] Extra 30 round magazine Extra 6 round WSSM magazine Harris Bipod (if installing on FIRSH, you will need the BPM option) Harris Bipod and Harris #5 adapter Harris S-series Bipod (if installing on FIRSH, you will need the BPM option) Harris S-series Bipod and Harris #5 adapter Bi-pod mount for picatinny rails (FIRSH handguard) Bipod stud mounted on standard aluminum free-float handguards Bipod stud/mount for GI handguards 416 stainless steel barrel (SS is standard on some models) Picatinny gas block for use with free floating handguards Muzzle brake for use with our PCR barrels (not for BULL for FAR barrels) Upsize to 24 barrel (not available for all models) Barrel fluting [Not available on all models] Phantom flash suppressor (for models with A2 flash suppressor standard) M4 fiberite handguards (for 16 non-bull barrels) Upgrade to aluminum tubular free floating handguard for 16 barrels Upgrade to aluminum tubular free floating handguard for 20 barrels Upgrade to FIRSH free floating handguard for 16 barrels Upgrade to FIRSH free floating handguard for 20 barrels (and Eliminator barrel) Upgrade to FIRSH free floating handguard for Stuby barrels ERGO Sure-Grip pistol grip ERGO tactical pistol grip with palm shelf M4 aluminum 6-point collapsible buttstock ACE FX skeleton buttstock ACE FX stubby skeleton buttstock ACE FX Ultralight skeleton buttstock ACE FX Ultralight stubby skeleton buttstock Flip-up sight, multiple aperture rear sight Flip-up sight, detachable front sight Flip-up sights, front and rear sight set (MARS & DFS) Yankee Hill Sights Custom Serial Number (Limit 9 Alpha/Numeric Characters) (Price is Subject to Quantity)
K9-UR K10-UR K40-UR K45-UR +GL options FT A3 F8R F8A BPS HBP#5
K1CA unit, 9mm w/ magazine K1CA unit, 10mm w/ magazine K1CA unit, 40 S&W w/ magazine K1CA unit, 45 ACP w/ magazine For GL lower receiver, 9mm & 40 S&W only
Forged flat top upper w/ picatinny rails Forged flat top upper w/ carry handle FIRSH free floating rail handguard Aluminum free floating handguard Bipod stud installed on Freefloat handguard Harris #5 Bipod stud
Olympic Arms pistol cal top end assemblies convert your AR into a pistol caliber dynamo! Choose from 9mm, 10mm, 40 S&W or 45 ACP calibers. No modifications to the lower receiver are necessary, and no tools to install are needed. Just install the pistol caliber conversion upper on your assembled lower, change the magazine and youre good to go. These kits are also available with a host of the regular options. Options include flat top upper, free floating handguards, bipod studs and mounts, rail kits and more. These top end assemblies are fully assembled, head-spaced, bore-sighted and test-fired for function with 5 rounds. NOTE: Pistol cal barrels are not available as M4, fluted or featherweight contours.
Additional Magazines K9-M K10-M K40-M K45-M 30 round Olympic Arms 9mm Pistol cal Mag 18 round Olympic Arms 10mm Pistol cal Mag 20 round Olympic Arms 40 S&W Pistol cal Mag 18 round Olympic Arms 45 ACP Pistol cal Mag $45.44 $45.44 $45.44 $45.44
The feed ramp in the Pistol Caliber Upper Receivers has changed slightly over the years and the polymer magazine may not work in all Upper Receivers without minor modification. If you purchase a magazine and it doesnt feed properly send in your upper receiver to the factory to perform this modification free of charge.
9MM
10MM
40 S&W 45 ACP
20
21
Top End Assemblies | 6.8 Remington, 7.62 x 39mm, 5.45 x 39mm, WSSM
K8-MAg-UR These top end assemblies include a flat top upper receiver with picatinny rail, charging handle, bolt carrier assembly, 24 or 20 bull diameter Ultramatch broach-cut barrel in stainless steel chambered to the Winchester Super Short Magnum caliber specified. Also includes a free floating aluminum tube handguard with knurled surface and a gas block with picatinny rail. Also includes one 5 round magazine for WSSM.
16 top end assembly, stripped 16 top end assembly, complete 20 top end assembly, stripped 20 top end assembly, complete 20 Ultramatch assembly, complete 20 Targetmatch assembly, complete
Complete (CA) uppers include a charging handle and bolt carrier assembly and are fully assembled, head-spaced, boresighted and test fired by Olympic Arms. Stripped (SA)uppers do not include a charging handle or bolt carrier assembly and are thus not head-spaced or test fired.
WARNING: When ordering stripped top (SA) end assemblies it is agreed that the purchaser assumes all responsibility with regards to proper assembly, headspace and function. Complete and stripped uppers include our Lifetime Warranty and Satisfaction Guarantee. K1 These top end assemblies include a flat top or A2 upper receiver with fully adjustable rear sight, 16 button rifled barrel in chromemoly steel chambered to 5.56 NATO, handguards, A2 front sight with sling swivel and bayonet lug, threaded muzzle with A2 flash suppressor.
Code Item Retail
K8-MAG top end assembly, WSSM (specify caliber) K30R top end assembly, 7.62 x 39mm K68 top end assembly, 6.8 Remington / SPC K74 top end assembly, 5.45 x 39mm Winchester Super Short Magnum .223 Winchester Super Short Magnum .243 Winchester Super Short Magnum .25 Olympic Super Short Magnum .300
The WSSM upper receivers do not have a brass deflector or an ejection cover assembly.
K2 These top end assemblies include a flat top or A2 upper receiver with fully adjustable rear sight, 20 button rifled barrel in chromemoly steel chambered to 5.56 NATO, handguards, A2 front sight with sling swivel and bayonet lug, threaded muzzle with A2 flash suppressor.
Additional Magazines H12WSSM H12-762 H1268 Additional 5 round magazine, WSSM Additional 30 round magazine, 7.62 x 39mm Additional 25 round magazine, 6.8 Remington / SPC $38.94 $35.04 $36.34
These top end assemblies are fully assembled, head-spaced, bore-sighted and test fired. Includes our Lifetime Warranty and Satisfaction Guarantee.
K68-UR These uppers include your choice of an A2 or Picatinny Flat-top upper. As a complete upper, it also includes charging handle, bolt carrier assembly, 16 M4 button rifled barrel in 416 stainless steel chambered to 6.8 Remington/SPC, M4 handguards, front sight with sling swivel and bayonet lug, threaded muzzle with A2 flash suppressor. Includes one 25 round magazine for 6.8 Remington / SPC. Also available with 16 and 20 heavy contour barrels as well.
K6 This top end assembly includes a flat top upper receiver, charging handle, bolt carrier assembly, 20 broach cut bull barrel in stainless steel chambered to .223 Remington, aluminum tubular free floating handguard, gas block with picatinny rails and a crowned muzzle.
K8 This top end assembly includes a flat top upper receiver, charging handle, bolt carrier assembly, 20 button rifled bull barrel in stainless steel chambered to 5.56 NATO with satin bead-blast finish, aluminum tubular free floating handguard, gas block with picatinny rails and a crowned muzzle.
K30R-UR This top end assembly includes a flat top or A2 upper receiver with fully adjustable rear sight, charging handle, bolt carrier assembly, 16 button rifled barrel in 416 stainless steel chambered to 7.62 x 39mm, handguards, A2 front sight with sling swivel and bayonet lug, threaded muzzle with A2 flash suppressor. Also includes one hicap magazine for 7.62 x 39mm.
22
23
PC24 PC26
Code Item Retail
$161.20 $164.00
ESEJP
ESEJP PC24___ PC26___ PC36___ PC38 PC39B Calibers 9 10 40 45 Parts Sets PC28
Pistol cal, Espring ejector spring Pistol cal, bolt carrier assembly (specify caliber) Pistol cal, bolt assembly (specify caliber) Pistol cal, extractor (specify caliber) Pistol cal, extractor spring Pistol cal, firing pin spring
$14.30
These pistol caliber parts are for use in Olympic Arms pistol caliber AR-15 models only! Our pistol caliber parts will not work in other manufacturers models. Nor will another manufacturers pistol cal parts work in Olympic Arms pistol cal models. Bolt carrier assemblies [PC24] are complete with carrier, two hex screws, carrier block, cam pin, firing pin, firing pin spring, firing pin retaining pin and a complete bolt. The bolts [PC26] are complete and include the extractor. The pistol caliber ejector spring assembly [PC28] includes an ejector spring, ejector spring retainer, ejector spring retainer pin and ejector spring positioning spring.
24
25
Item 16 barrel, chromemoly steel 16 barrel, stainless steel 20 barrel, chromemoly steel 20 barrel, stainless steel 16 M4 contour barrel, stainless steel Same as F1H in 6.8 Remington caliber
F1H F1HB68
Barrel Assembly Upgrades F8R F7R AWB FIRSH handguard for 16 barrel kits FIRSH handguard for 20 barrel kits Muzzle not threaded, no bayonet lug $128.70 $167.70 N/C
Part Description Retail RFA Bolt Group Assembly ............... $161.20 RFA-545 Bolt Group Assembly for 5.45 cal $164.00 K22 Bolt Group Assembly........... CALL RFA2 Recoil Spring ........................ $1.50 RFA3 Straight Pin .......................... $4.75 RFA4 Headless Pin ......................... $.25 RFA5 Straight Pin .......................... $9.36 RFA6 Bolt Assembly ....................... $56.16 RFA7 Extractor Spring..................... $1.76 RFA8 Extractor Plunger ................... $1.76 RFA9 Extractor ............................. $7.77 RFA10 Cartridge Retainer .................. $.25 RFA11 RFA Chamber End:5.56/223 ....... $21.84 RFA11-545 RFA Chamber End:5.45x39......... $39.00 RFA12 Pin Hook Assembly ................. $.13 RFA13 Rail Guide & Extractor ............ $15.60 RFA14 Position Spring Retaining Screw .. $.63 RFA15 Firing Pin, Bolt Assembly .......... $11.57 RFA16 Position Spring ...................... $.62 RFA17 Lug Support .......................... $6.24 RFA18 Firing Pin Spring .................... $.31 RFA19 Socket Head Cap Screw ............ $.87 RFA20 Support Rail ......................... $24.96 RFA21 Extractor Roll Pin....................$.20
The indicated numbers on the schematic correspond to the last digits of the part number in the parts list.
CAR barrel is an 11.5 button rifled barrel with a permanently attached 5.5 flash suppressor. FAR barrel is a 16 barrel with a featherweight contour. Standard barrel assemblies include a threaded muzzle, flash suppressor w/ compression washer, barrel nut, A2 front sight w/ bayonet lug, gas tube, gas tube roll pin, delta ring assembly, sling swivel and appropriate length fiberite handguards.
F1A
F1-23 Code F1-23 F23R Item 6.5 barrel, chromemoly steel FIRSH handguard for 6.5 barrel kit Retail $269.00 $110.50 K23B Stubby Barrel Assembly
Please call our Customer Service Team for prices and availability of parts for the RFA/K22 conversion systems.
This assembly features a 6.5 button rifled barrel from 4140 chromemoly steel with threaded muzzle, sling swivel, Phantom flash suppressor, compression washer, barrel nut, free floating aluminum tubular handguard and gas tube. The barrel includes A2 front sight without bayonet. F1-23 is only available for legally registered AR pistols and short barreled rifles. Please call our Customer Service Team for details as any other use is NOT LEGAL.
26
27
90
10
40 16 EXRING 38 36
30
64
65 64
88 90 83 84 92 89 39
28
Add the prefix AR to the number shown on the diagram to get the product code. i.e. #89 on the diagram would be AR89. The lower receiver parts set includes all parts necessary to complete a stripped lower receiver not including the buttstock or pistol grip.
93 AC5 70
T26 69 74 H8
Best AR bolt available anywhere
T24A Code T3 AR7 AR8 AR9 AR10 AR12 AR13 AR26 AR27 AR63 AR64 AR65 AR68 AR69 AR70 AR74 AR82 AR82R AR83 AR84 AR88 AR89 AR90 AR91 AR92 AR93 AR94 Item Forged lower receiver, stripped Bolt catch Bolt catch, plunger Bolt catch, roll pin Bolt catch, spring Buffer detent Buffer detent, spring Disconnector Disconnector, spring Hammer Hammer / trigger pin, 1 pin Hammer spring Magazine catch Magazine catch, spring Magazine catch, button Pivot pin (front) Safety, selector Safety, selector, reversible Safety, detent Safety, spring Takedown pin (rear) Detent Detent, spring Trigger Trigger guard Trigger guard, roll pin Trigger, spring Retail $141.70 $8.45 $1.17 $0.78 $0.78 $2.08 $0.78 $5.85 $0.78 $15.60 $1.17 $1.43 $6.44 $1.17 $2.86 $7.02 $15.28 $23.30 $1.43 $1.01 $7.02 $0.78 $0.78 $15.28 $7.02 $0.78 $1.43 Code 2ST AC5 H8 H9 H11 H15 T27 WGA WGB WGC Item Two-stage trigger Trigger guard, gapper Pivot pin, GI upper to Colt lower Pivot pin, Colt upper to GI lower AR-15 field kit AR64, anti-walk type, 2 pins Lower receiver parts set Wedgie, 1-499 pcs Wedgie, 500-999 pcs Wedgie, 1000+ pcs Retail $136.50 $3.51 $8.32 $6.00 $44.85 $7.02 $72.80 $1.94 $1.61 $1.29 Additional Products H11 Code AR3 T26-9 T26-10 T26-40 T26-45 AR3-310 AR4 AR4FA AR5 AR6 AR11 AR11B AR16 AR30 AR31 AR36 AR37 AR38 AR39 AR40 Item Bolt, complete (223/556 cal) Bolt, complete, pistol caliber, 9mm Bolt, complete, pistol caliber, 10mm Bolt, complete, pistol caliber, 40 S&W Bolt, complete, pistol caliber, 45 ACP Bolt, complete, 7.62 x 39mm Bolt carrier Bolt carrier, full-auto Bolt carrier, key Bolt carrier, key screw Bolt gas rings, set of 3 ERing 1 Piece gas ring Cam pin ESEJ Ejector spring Ejector roll pin Extractor Extractor pin Extractor spring; HD w/o insert Firing pin, new Firing pin, retaining pin Retail $59.80 $84.50 $84.50 $84.50 $84.50 $72.80 $61.10 $61.10 $13.00 $0.78 $2.93 $8.39 $5.85 $5.85 $0.78 $14.30 $1.63 $2.60 $10.40 $0.78 Code AR42C ESEJ EXRING EXRINGD T26 T24A T24A762 T24A68 HTU Item
ESEJ
HTU
2ST H15
EXRING AR11B
AR42C
Add the prefix AR to the number shown on the diagram to get the product code. i.e. #6 on the diagram would be AR6. Full auto carriers are available when valid S.O.T. or FORM 4 are on file. Call for details.
Retail $4.23 $5.85 $1.90 $28.00 $59.80 $136.50 $164.00 $165.00 $35.00
Additional Products Compression washer, flash hider ESpring ejector spring, aka AR30 EXring, extractor assist Exring, extractor assist, 25pcs Bolt, complete (223/556), aka AR3 Bolt carrier assembly, 223/556 Bolt carrier assembly, 7.62 x 39mm Bolt carrier assembly, 6.8 rem High tech upgrade kit
28
29
Upgrade from black to Coyote Brown or Pink on any model with carbine length handguards, pistol grip and collapsible buttstock. Retail Upgrade $29.50
Coyote Brown
T12
K5ACS
T3
Desert Tan
Code T2 T12 T3 K5A K5U K5ACS K5CSU K5ANS T5 T6 Item Forged A2 upper, stripped Forged flat top upper, stripped Forged lower receiver, stripped Forged lower receiver set, A2, assembled Forged lower receiver set, A2, unassembled Forged lower receiver set, collapsible, assembled Forged lower receiver set, collapsible, unassembled Forged lower receiver set, no buttstock, assembled Receiver matched set, T2 & T3 Receiver matched set, T12 & T3 Retail $110.50 $141.70 $141.70 $323.00 $284.70 $323.70 $517.40 $284.70 $271.70 $234.00 $233.00
All of our receivers are forged and made from 7075 T6 aluminum forgings. Olympic Arms has been manufacturing both upper receivers and lower receivers since 1975 and has a history supplying them to other big name manufacturers. Stripped uppers and lowers do not include any internal or external parts. Lower receiver sets include the stripped lower receiver, pistol grip, buttstock (either A2 or collapsible) and all internal receiver parts. Receiver matched sets include a stripped upper and a stripped lower receiver.
Pink
Upgrade options F11 Forged Detachable Carry handle for T12 $104.00
Whitney Wolverine
Page 48 Coyote Brown
K5 Lower receiver set options T30AM4 SSA Aluminum M4 collapsible stock Ambi side sling adapter, collapsible stocks only +$96.20 +$18.20
30
31
250!
The following features are used in addtion to standard features on the UMAR lower receiver: 1. Modified UMAR AR-15 lower receiver magazine well. Designed specifically for the UMAR magazines to accept the venerable .22-250 caliber and long WSSM loads. 2. Threaded bolt catch hole: designed for a quick and easy change of your bolt catch between standard 5.56 magazine and the UMAR magazines, (Which use different bolt catches). Swap back and forth in seconds! 3. All modified UMAR lower receivers can also readily accept every standard AR-15 upper and caliber option. The UMAR lower is applicable to all AR-15 calibers from .22 LR and 5.56 NATO, to the WSSM and .22-250 calibers. Just swap the upper, the magazine and the bolt catch (if needed). 4. UMAR magazines come in two vatieties: .22-250 or WSSM/OSSM
MSRP: $1588.70
*Upper receivers are not available for the 22-250. This is due to the fact that they will not work on standard AR15 lowers.
Standard Lower
UMAR Lower
7075 T6 Aluminium Forged Receivers Machined By Olympic Arms Black Matte Anodized Receivers, Parkerized Steel Parts Gas Operated Semi-automatic Action Flat top w/ picatinny rails Gas block w/ picatinny rails Predator style free floating aluminium tube w/ knurled surface 24 Heavy match grade bull barrel, 416 stainless steel Sling Swivel Mount (BPMS) .22-250 REM, .223 WSSM, .243 WSSM, .25 WSSM or .300 OSSM Long-life non-chromed bore Target Crown A2 Stock w/ trapdoor Custom Caliber Specific magazine Length 42.5 inches Weight 9.41 lbs (stock weight)
2.420 OAL with UMAR Magazine
Twist Rates .22-250 REM(1x14) .223 WSSM (1x14, 1x8*, 1x10*) .243 WSSM (1x10, 1x8*, 1x14*) .25 WSSM (1x10) .300 OSSM (1x12) *Optional twists Selecting an optional twist will classify this as a speciality item and a manufacture and delivery time will not be able to be given. 33
32
Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating slotted aluminum tube 22, button rifled, 416 stainless steel .243 WSSM, .25 WSSM, .300 OSSM 6.8 SPC, 5.56 NATO, 7.62x39 Long-life non-chromed bore 1x12(.243)1x10(.25)1x12(.300) 1x11(6.8)1x9(5.56)1x10(7.62x39) Crown ACE FX skeleton stock 40.25 / 7.5 lbs Includes an ERGO grip and Camoflaged design. Retail $1363.70 $1233.70 $895.70 $765.70
T23 F11
Complete Firearm Complete Firearm GSG2 Upper Receiver Assembly Only in Black
.300 Olympic Super ShOrt magnum Exceeds 30-06 Ballistics 150 grain bullets at 3,000+ fps! Made by HSM 20 Rounds per box Call for stock and more information. Retail $49.95 per box
43
SR2
45
T21
44
T12
Add the prefix AR to the number shown on the diagram to get the product code. i.e. #33 on the diagram would be AR33. Code AR20 AR22 AR23 AR24 AR32 AR33 AR34 AR35 AR43 AR44 AR45 F11 Additional SR1 SR2 T2 T11 T12 T12A T13 T21 T22 T23 T23TL Item Charging handle, complete (T23) Charging handle, latch Charging handle, latch roll pin Charging handle, latch spring Ejection cover Ejection cover, spring Ejection cover, hinge pin Ejection cover, hinge pin clip Forward assist, round Forward assist, retainer pin Forward assist, spring Detachable Carry Handle (A3) Products Scope rings, 30mm w/ 1 inserts Scope rings, 1 Upper receiver, A2, stripped Upper receiver, A2, w/ parts Upper receiver, flat top, stripped Upper receiver, flat top, w/ parts A2 carry handle scope mount Round forward assist assembly Ejection cover assembly Charging handle, complete (AR20) Charging handle, tactical latch Retail $28.60 $6.50 $0.78 $0.78 $11.70 $1.17 $1.43 $0.78 $18.20 $0.78 $1.43 $104.00 $56.00 $25.03 $110.50 $190.00 $141.70 $170.00 $19.50 $18.20 $13.00 $28.60 $28.54
T2
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Misc:
LTF-Predator
Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ rails 16, button rifled, 4140 chromemoly steel 5.56 NATO, 6.8 SPC, .204 Ruger 7.62x39 Long-life non-chromed bore 1x9 A2 flash suppressor ACE FX skeleton stock 35.5 / 6.44 lbs Includes an ERGO grip full length barrel fluting and plenty of rail space making this model OPTIC READY. Retail
32
34 35 33
Flat top upper with parts [T12A] includes the flat top receiver, round forward assist assembly and ejection cover assembly. The A2 upper with parts [T11] includes the A2 receiver, round forward assist assembly, ejection cover assembly and rear sight assembly. Stripped receivers [T2, T12] do not include any parts. Charging handle tactical latch [T23TL] does not include the charging handle itself. Assembly T21 includes AR43, AR44 and AR45. Assembly T22 includes AR32, AR33, AR34 and AR35. Charging handle T23 and AR20 are the same product.
34
35
AR56
7 7 8 8
AR80
13
15
3 2
GB750
GB940
AR79
10 8 7 11
F2A1PC
AR78
AR77 AR86 AR61 AR85 AR60 Code DFS MARS F5A AR67 AR95 AR25 AR57 AR56 AR58 MASS Add the prefix T15- to the number shown on the diagram to get the product code. i.e. #4 on the diagram would be T15-4. Rear sight assemblies [T14, T15, T15A] are complete with all parts. The A1 rear sight parts are only for A1 upper receivers and have only windage adjustment. The A2 rear sights do not fit on A1 upper receivers. Interchangeable aperture system [BJS] features a threaded aperture holder and five separate sized apertures. A tool for changing the apertures is included. Requires an A2 rear sight (not included). AR55 AR85 AR86 DFS GB750 GB940 AR60 AR61 F4S AR62 AR42C F2C F2A1 F2A2 F2A1PC H13 MB Item Delta ring & swivel assembly Delta ring, snap ring Delta ring, weld spring Delta ring Front sight, post Front sight, detent Front sight, detent spring Front sight, base Swivel, front Swivel, roll pin Flip up front sight, for gas blocks Gas block, standard barrel Gas block, bull barrel Gas tube, carbine length Gas tube, rifle length Gas tube, Stubby length Gas tube, roll pin Compression washer Flash suppressor, phantom Flash suppressor, A1 birdcage Flash suppressor, A2 birdcage Flash suppressor, pistol cal Sling, 1 wide nylon Muzzle brake, for PCR barrels Retail $19.50 $1.17 $6.96 $12.55 $4.23 $2.08 $0.78 $25.03 $5.53 $0.78 $71.50 $49.40 $49.40 $15.60 $18.20 $14.30 $0.78 $4.23 $45.00 $6.44 $6.44 $18.00 $5.20 $34.78 F4S H13
MB
Code Item T15 A2 Sight assembly T15-1 A2 Sight base T15-2 A2 Sight aperture T15-3 Leaf spring T15-4 Windage screw T15-5 Windage knob T15-6 Windage knob, roll pin T15-7 Windage knob, spring T15-7 Sight base constant alignment spring T15-7 Elevation wheel ball-bearing spring T15-8 Ball bearing T15-9 Elevation wheel cap T15-10 Elevation adjustment wheel T15-11 Elevation base spring T15-13 Sight base elevation lock roll pin T15-15 Elevation wheel lock screw Additional Products BJS Interchangeable aperture system MARS Flip up, multiple aperture rear sight DFS Flip up, detachable front sight MASS Set, flip up rear sight and front sight T14 Rear sight assembly, A1, windage T15 Rear sight assembly, A2, full adjustment T15A Rear sight assembly, A2, National Match AR75 A1 rear sight, aperture AR76 A1 rear sight, adjusting screw AR77 A1 rear sight, detent spring AR78 A1 rear sight, detent AR79 (T15-3 A1 rear sight, leaf spring AR80 A1 rear sight, windage drum AR81 A1 rear sight, windage drum roll pin
Retail $70.20 $11.12 $6.24 $1.24 $2.80 $4.16 $0.52 $0.39 $0.39 $0.39 $0.65 $4.88 $4.88 $1.04 $0.52 $0.72 $70.30 $96.20 $71.50 $148.20 $39.00 $70.20 $104.00 $7.15 $3.51 $0.78 $0.78 $0.78 $4.88 $0.78
The delta ring & swivel assembly includes the delta ring, weld spring, snap ring, front swivel, roll pin and gas tube roll pin. Gas blocks include set screws and extended gas tube roll pin. Gas tubes do not include roll pins. Flash suppressors do not include a compression washer. Front sight base is not drilled for barrel index pins. This part should be purchased and installed only by qualified gunsmiths.
BJS
36
37
ACE Ltd, USA is the creator and innovator of skeletonized AR-15 buttstocks on todays market. The FX line of stocks represents the highest quality of lightweight materials, durability under heavy use and comfort for extended use. Pistol grips do not include a grip screw or washer. Some ERGO grips will include a gapper [AC5] but is not guaranteed. Buttstock assemblies include all parts to fit the stock to a lower receiver. Buttstock shell assemblies include only the shell portion of the buttstock. Code F3A F3B F3ESG F3ETD F10 AR72 AR73 T31 AR15A AR15B AR15C AR15D AR15E AR15F H24 T30CM4 T30AM4 AR14A AR14B AR14C AR14G
T30CM4SAO
H24
Retro fit stocks get you the parts necessary to switch from an A2 buttstock to the ACE skeleton stock. Complete kit stocks get you all of the parts for installation onto a stripped lower receiver. Easy to install and each model includes an optional rubber pad for grip and comfort (shown installed).
T32S
T32UL
Item Pistol grip, stowaway Pistol grip, A2, non-stowaway Pistol grip, ERGO, sure grip Pistol grip, ERGO, tactical deluxe Pistol grip, ERGO, tactical target Pistol grip, screw Pistol grip, screw washer Buttstock, A2, assembly Buttstock, A2, shell assembly Buttstock, A2, buffer weight Buttstock, A2, receiver tube Buttstock, A2, buffer spring Buttstock, A2, screw Buttstock, A2, spacer Buttstock, A2, 1 extension kit Buttstock, M4, fiberite Buttstock, M4, aluminum Buttstock, M4, buffer weight Buttstock, M4, buffer spring Buttstock, M4, receiver tube Buttstock, M4, latch only Buttstock, Shell & Latch Assem. Buttstock, M4, lock ring Buttstock, M4, receiver plate Buttstock, M4, side sling adapter
Retail $11.18 $9.75 $26.00 $35.10 $61.10 $1.43 $0.78 $91.00 $48.75 $23.73 $25.03 $5.59 $2.15 $2.15 $13.00 $71.50 $96.20 $16.90 $5.85 $25.03 $3.90 $32.50 $6.96 $3.58 $18.20
AR96 AR97 T30CM4SAO AR14C AR14B AR14A AR15A AR15C AR15D AR15B AR15F AR15E
T31
Item FX stock, retro fit FX stock, complete kit FX stubby stock, retro fit Ultralight stock, retro fit Ultralight stubby stock, retro fit SOCOM collapsible stock
T32ULS T32SO
T30CM4 / T30AM4
Collapsible, 4-position!
38
39
F7RP
F7BN F7R
F7BN
VPgF BPMS BPMS F8RP My only complaint about my FIRSH is that is whistles when I HALO! (High Altitude-Low Opening parachute operations). -US Army Special Forces member F23R
VPgF
Predator handguards include a barrel nut and lock screw kit. Predator handguards are machined from aluminum extrusion with rails and vents on four sides. Internal diameter is 1.625. Code Item Predator, Free floating quad rail handguards F7RP F8RP F85RP Quad rail handguard, rifle length 12.5 Quad rail handguard, carbine length 7.125 Quad rail handguard, Mid length 9.250 The Mid length handguard covers the front sight base of the traditional carbine length gas system and will need a gas block, page 39 RLSK F7BN FIRSH/Predator lock screw kit Barrel nut, free floating handguards $8.00 $19.50 $206.70 $162.50 $188.50
HBP-S
FIRSH handguards include a barrel nut and lock screw kit. FIRSH handguards are machined from aluminum extrusion with rails and vents on four sides. Internal diameter is 1.625.
HBPS
Retail
Item Quad rail handguard, rifle length 12.5 Quad rail handguard, carbine length 7.125 Quad rail handguard, stubby length 3.625 FIRSH lock screw kit Barrel nut, free floating handguards
Additional Products VPGF HBP1 HBPS Vertical pistol grip, foam grip Harris bipod Harris bipod, S series Bipod adapter, for FIRSH Bipod adapter, for FIRSH, stud swivels $54.95 $84.50 $120.90 $25.03 $23.40
Additional Products VPGF HBP1 HBPS BPM BPMS Vertical pistol grip, foam grip Harris bipod Harris bipod, S series Bipod adapter, for FIRSH/Predator Bipod adapter, for FIRSH/Predator, stud swivels $54.95 $84.50 $120.90 $25.03 $23.40
BPM BPMS
40
41
F7BN
ARB24-BULL
F7A
ARB20-BULL ARB16-BULL
F8A
BPS
ARB16-ELIM
ARB16-ELIM
ARB16-PC ARB-CAR-PC
ARB-FAR
F23A Free floating aluminum tube handguards include a barrel nut. Free floating handguards are machined from aluminum extrusion with a knurled surface in the center. Internal diameter is 1.625.
Ultramatch Barrels | Twist Rate: 1x10, optional 1x8 | .223 Remington SUM16 SUM20 16 Ultramatch 20 Ultramatch 24 Ultramatch $335.40 $345.80 $383.50
ARB-CAR
SUM24
Barrel Upgrades
Item Aluminum tube, rifle length 12.5 Aluminum tube, carbine length 7.125 Aluminum tube, stubby length 3.625 Barrel nut, free floating handguards Bipod stud, for aluminum tube
ARB-M4
Gas block for bull barrels Muzzle not threaded, no bayonet lug Stainless steel Satin bead blast finish (SS barrels only) Alternate twist rate (see list below) Alternate caliber (see list below) Barrel fluting Custom shop fee Custom length, contour or thread
ARB16
ARB20
Alternate Calibers | ARB Barrels Only 762 7.62 x 39mm 6.8 Remington / SPC 68
ARB24
All barrels ordered with custom shop options (fluting, custom length, contour or threads) are subject to the Custom Shop fee. Bull barrels have crowned muzzles and will require a free floating handguard, barrel nut and gas block (none included). ARB16-ELIM now includes the specialized gas block for under the handguard. item. 90 day minimum * Custom shopeach custom shop item. lead time. applies once for Custom shop fee
ARB20-F
42
43
39
T15-8 T15-7 T15-6 T15-5 T15-9 T15-10 T15-15 T15-1 T15-4 T15-7 T15-8 T15-2
6 5 40
Code AR1 AR2 AR3 PC26-9 PC26-10 PC26-40 PC26-45 AR3-310 AR36.8 AR4 AR4FA AR5 AR6 AR7 AR8 AR9 AR10 AR11 AR11B AR12 AR13 AR14A AR14B AR14C AR14C1 AR15 AR15A AR15B AR15C AR15D AR15E AR15F AR16 AR17 AR18 AR20 AR22 AR23 AR24 AR25 AR26 AR27 AR28 AR30 AR31 AR32 AR33 AR34 AR35 AR36 AR37 AR38 AR39 AR40 AR41 AR42C AR43 AR44 AR45 AR55 AR56
16
3 37 11 36 31 38 30 28
T15-3 T15-13
24 T15-8 23 22 20
T15-11
T15-7
66 57 61 62 56 58 55 42C 41
59 86 7 9 68 90 89 17 (Round) 18 (Triangular)
85
59
87
69 70
44
45
Cobalt Trainer
PML
gF
The purpose of the COBALT TRAINER as a complete rifle is to be a BATFE classified non-firing rifle used for training, but to be one as functionally similar to a live-firing rifle as possible. One definitive characteristic of the COBALT TRAINER is the design of the lower receiver. Brian Schuetz of Olympic Arms, Inc. designed the COBALT TRAINER lower receiver in a manner that allows the part to maintain the appearance of its live-firing counterpart and at the same time incorporating a modification that keeps the COBALT TRAINER lower receiver from being converted to a live-fire usable part. Noting the photos below it can be seen that a functioning trigger is incorporated though the trigger housing area of the lower receiver is a solid piece. This design change prevents a fully functioning trigger from being installed into the lower receiver which in turn prevents the COBALT TRAINER lower receiver from being used in a manner it was not intended for.
ACRKS
F6 HBP#5 Code H12 H12-30 H12-WSSM K9-M K10-M K40-M K45-M GF-A GF-B GF-C GF-10 F6 M4S ACRKS HBP#5 H12-2230 H12-2210 PML Item AR-15 magazine, 10 rnd, 223/556 AR-15 magazine, 30 rnd, 223/556 AR-15 magazine, 6 rnd, WSSM Pistol cal magazine, 30 rnd, 9mm Pistol cal magazine, 18 rnd, 10mm Pistol cal magazine, 20 rnd, 40 S&W Pistol cal magazine, 18 rnd, 45 ACP Magazine follower, 1-500 pcs Magazine follower, 501-1000 pcs Magazine follower, 1001-5000 pcs Magazine follower, 10 pc retail pack Handguards, fiberite, rifle length 12.5 Handguards, fiberite, M4 contour 7.125 Rail kit, for fiberite handguards Bipod adapter, fiberite handguards AR-15 Magazine, 20 Round .22LR AR-15 Magazine, 10 Round .22LR Pistol Magazine Loader Retail $20.80 $24.70 $38.94 $45.44 $45.44 $45.44 $45.44 $1.50 $1.25 $0.99 $13.50 $20.80 $24.70 $16.90 Pistol cal magazines are not always in stock. Please check for availability before ordering. F6 & M4S handguards include heat shield liners. M4S
The COBALT TRAINER lower receiver still accepts standard magazines and includes a magazine catch with button. The receiver can have various standard thread buttstocks installed and includes a standard safety-selector assembly.
Rail kit [ACRKS] attaches to any of our fiberite handguards $15.60 without drilling to add picatinny rails for your accessories. $32.44 $32.44 $20.80
46
47
Some parts for original Whitney Wolverine models are available. Repair service for original Whitney Wolverine models is available.
32-6
Current and original Whitney Wolverine models do not use the exact same parts. This diagram does not accurately represent parts for original models.
Revival of the 1950s pistol by Robert L Hillberg. Now with a polymer frame and ventilated rib. The magazine shell is all metal for strength and durability. All mechanical parts are contained inside the frame shell and are easily disassembled without tools. Lightweight and fun to use. Points naturally for most shooters. Whitney Wolverine Specifications: 4.625 Barrel 6-groove, 1x16 twist rate 5.25 Sight radius Blade type front sight Dovetail rear sight Uses .22 Long Rifle Magazine capacity: 10 rounds Black checkered grips Length: 9 Height: 5.5 Empty Weight: 19.2 oz.
Code WW WWP WWDT WWCB Item Whitney Wolverine, .22 LR Pistol, Black Original Whitney Wolverine Repair Whitney Wolverine, .22 LR Pistol, Pink Whitney Wolverine, .22 LR Pistol, Desert Tan Whitney Wolverine, .22 LR Pistol, Coyote Brown To View the colors, see page 33 Whitney Wolverine Accessories WWM WWC WWAS WWFS WWH WWS Additional magazine Additional hard case Adjustable rear sight Flash suppressor Ballistic nylon holster Checkered cocobola grips $38.94 $12.35 $52.65 $15.95 $30.95 $41.60 WWH Retail $294.00 68.00/hr $294.00 $294.00 $294.00 WWFS
WWAS
041
WWS
Repair service for original Whitney Wolverine pistols is available. Price is per hour of shop time not inclusive of necessary parts. Call for details about repair services for original Whitney Wolverine pistols.
Code JLM-004 JLM-005 JLM-006 JLM-007 JLM-008 JLM-009 JLM-010 JLM-011 JLM-012 JLM-014 JLM-015 JLM-016 JLM-017 JLM-018 JLM-019 JLM-020 JLM-021 JLM-023 JLM-024 JLM-025 JLM-026 JLM-027 JLM-028 JLM-029 JLM-030 JLM-031 JLM-032-1
Description Magazine Assembly Barrel Barrel Seat Side Plate Barrel Nut Tube / Slide Breech Block / Bolt Extractor Firing Pin Breech Pin / Bolt Pin Firing Pin Lock Frame Action Frame Hammer Sear Trigger Sear Bar Magazine Bottom / Floor Plate Magazine Follower Magazine Bottom Lock Magazine Insert Cocking Piece Strut Hmr Spring Plunger / Strurt Seat Trigger Spring Plunger Magazine Catch Mainspring / Recoil Spring
Retail $38.94 $71.50 $4.55 $10.40 $7.68 $44.53 $44.53 $7.77 $13.00 $4.11 $3.58 N/A $26.33 $22.10 $9.04 $12.94 $15.28 $6.43 $6.44 $2.28 $2.28 $17.48 $4.10 $2.93 $2.93 $6.89 $8.32
Code JLM-032-2 JLM-032-3 JLM-032-4 JLM-032-5 JLM-032-6 JLM-033-1 JLM-033-2 JLM-033-3 JLM-033-4 JLM-033-5 JLM-034 JLM-035 JLM-036 JLM-037 JLM-038 JLM-039 JLM-040 JLM-041 JLM-042 JLM-043 JLM-044 JLM-045 JLM-046 JLM-047 JLM-048 JLM-049 JLM-050
Description Extractor Spring Hammer Spring / Main Spring Magazine Spring Trigger Spring Cocking Plunger Spring Sear Pin Strut Pin Magazine Catch Pin Hammer Pin Safety Lock Pin Extractor Plunger Trigger Connector Sear Spring Trigger Pin Barrel Key Ejector Pistol Grips Screw, Grip & Side Plate C Clip - Hammer Pin Magazine Disconnect Hammer Spring Seat Barrel Locking Plunger Hammer Pin Sleeve Rear Sight Spring Seat Pin Barrel Index Pin (2) Safety
Retail $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $1.76 $4.55 $1.76 $3.58 $7.28 $31.20 $3.12 $1.56 $6.63 $2.28 $4.88 $2.86 $6.27 $1.76 $2.86 $11.05
48
49
The Schuetzen Pistol Works is the 1911 division at Olympic Arms. The Pistol Works demonstrates Olympic Arms commitment to the greatest pistol design in history: John Moses Brownings 1911. We offer you choices available nowhere else. There are production pistols, four kit frame configurations, two lengths of kit slides, and a wide variety of parts, barrels, and pistolsmithing services. All SPW pistols feature matched frames and slides, individually fitted and head-spaced barrels, complete ramp and throat jobs, lowered and widened ejection ports, beveled mag wells, handstoned-to-match hammers and sears, lightweight long-shoe over-travel adjusted triggers, shaped and tensioned extractors, extended thumb safeties, wide beavertail grip safeties, adjustable rear sights, dovetail front sights, and full length guide rods. Every pistol is test-fired with military hardball, major power factor LSWC, and JHP ammunition. Full length guide rods are not standard on 6 models, but are available as an option. Our Specialty Shop crafts deadly serious 1911s for Law Enforcement and Military professionals, as well as Dream Guns for the dedicated enthusiast. The pictured 6 Damascus long slide on a M-3 frame is but one example of what we can do for you. All of our pistols are considered custom so please be aware there might be a slightly longer than normal production time.
The Journeyman and Street Deuce models are custom made pistols from Olympic Arms Schuetzen Pistol Works. Each part is hand selected and fitted by Expert Pistolsmiths. For each model, at no extra cost, you can choose your mainspring housing and rear sight. The mainspring housing is Smith & Alexander, checkered to 20 LPI with the choice of flat or arched. For rear sight you choose LPA adjustable or Heinie Slant-pro fixed.
Along with custom work for our own line of 1911 pistols, the Schuetzen Pistol Works also offers custom services for the 1911 pistol already in your collection. Whether you need new parts and labor, sight work machining, trigger work or just a special service, our Expert Pistolsmiths will work their decades of experience into your 1911 pistol.
If you dont see a specific option you are looking for please call and speak with one of the best 1911 pistolsmiths in the world about what you would like.
50
51
Matchmaster 5
Barrel: Frame: Grips: Capacity: Overall: Weight: 5, Stainless Steel M1, Hooked TG & Groove FS PHB3, Laser Etched Scorpion 7+1 L 8.75 x H 5.5 40 oz., Empty
Big Deuce
Barrel: Frame: Grips: Capacity: Overall: Weight: 6, Stainless Steel M1, Hooked TG & Groove FS EB2, Double Diamond Cocobolo 7+1 L 9.75 x H 5.5 44 oz., Empty
Westerner
Barrel: Frame: Grips: Capacity: Overall: Weight: 5, Stainless Steel CRF1, Round TG & Straight FS Laser Etched Westerner Icon 7+1 L 8.75 x H 5.5 39 oz., Empty
Trail Boss
Barrel: Frame: Grips: Capacity: Overall: Weight: 6, Stainless Steel CRF1, Round TG & Straight FS Laser Etched Westerner Icon 7+1 L 9.75 x H 5.5 43 oz., Empty
53
EE 1 M0 -6 ds un ro
-7
Naked Frames
ds un ro
02 MM -8
Enforcer
+L
ds un ro
Additional Magazines MM01 MM02 EEM01 Fits full size frames, 7 round Fits full size frames, 8 round Fits enforcer frames, 6 round $29.00 $31.20 $39.00
Cohort
Constable
CRF1 Standard GI type frame with round trigger guard and straight front strap. CRF1B Naked, carbon steel
Street Duece
Journeyman
54
55
AS4A
AS3A
AS1A
SA47
SA55 If you cannot locate the part you need, contact our Customer Service Team for assistance.
SA49
SA48
C4536
C56SAF
C56SAA
Code C4504 C4505 C4506 C4507 C4509 C4510 C4511A C4511NM-A C4511B C4511NM-B C4512W C4513 C4514A C4514B C4515 C4516 C4517 C4518 C4520 C4521 C4522A C4522B C4523A C4523B C4524 C4525 C4526 C4527 C4528A C4528B C4529 C4530 C4531 C4532A C4532B C4533A C4533V C4535
Item Desc Extractor Firing pin Firing pin, spring Firing pin, stop Barrel link, black Barrel link, pin Barrel bushing, stainless Barrel bushing, NM, stainless Barrel bushing, Black Barrel bushing, NM, black Wolff Recoil spring Recoil spring, guide government Recoil spring, cap, stainless Recoil spring, cap, black Ejector, government Ejector pin Disconnector Sear Hammer strut Hammer strut, pin Slide stop, government Slide stop, government, stainless Magazine catch, stainless Magazine catch, black Magazine catch, spring Magazine catch, lock Hammer pin Sear pin Plunger tube, stainless Plunger tube, black Slide stop plunger Plunger spring Safety plunger Thumb safety, black Thumb safety, stainless Trigger, aluminum Trigger, aluminum adjustable Sear spring
Retail $11.05 $3.25 $1.46 $2.93 $10.24 $0.78 $13.65 $16.09 $13.65 $15.59 $9.00 $5.06 $5.85 $5.20 $5.85 $0.49 $18.04 $18.53 $4.16 $0.98 $14.24 $16.58 $9.75 $12.35 $1.00 $2.44 $0.72 $1.27 $5.36 $4.68 $0.49 $1.30 $0.49 $15.70 $17.55 $10.24 $17.55 $2.28
SA52
C4523
PHB2 grips fit enforcer size frames only, have a smooth finish and are laser etched with our black widow icon. PHB3 grips fit full size frames, have a smooth finish and are laser etched with our scorpion icon. EB2 grips features exotic wood and are exclusive to Olympic Arms. EB grips are fully checkered walnut grips. PHB3 PHB2 C4533A EB EB2
SA50
HHP-1
SA52
C4533V
Code C4536A C4536B C4537 C4538 C4539 C4540 C4541 C4543B C4543A C4544 C4544A
Item Desc Mainspring housing, flat, black Mainspring housing, enforcer Mainspring cap pin Mainspring cap Mainspring Mainspring retainer Mainspring housing retainer pin Grip screw, black Grip screw, stainless Grip screw, escutcheon, black Grip screw, escutcheon, stainless
Retail $16.25 $52.00 $1.17 $1.17 $2.60 $1.17 $0.49 $1.12 $1.11 $0.49 $1.48
56
57
WSg-S
WS16
H4-5 H3 WS4
oAL
H5A
H5B
H5C Weapon Shield cleaning products utilize ABF (Advanced Boundary Film) to clean, lubricate and protect your firearms. Provides practical elimination of metal to metal wear, protection for moving metal parts, significant reduction in dust, debris and fouling, increased firearm reliability and increased firearm accuracy.
Code AC1 OAL AC8-KC AC8 AC74-KC AC74 AC75-KC AC75 H45 H3 H5A H5B H5C H5S H2 H28
Item Chamber cleaning kit Cable gun lock Delryn punch, compact key chain Delryn punch, full size 4 prong sight tool, compact key chain 4 prong sight tool, full size 5 prong sight tool, compact key chain 5 prong sight tool, full size 5 prong sight tool, A1 windage tool Collapsible stock spanner wrench Headspace gauge, GO Headspace gauge, NO-GO Headspace gauge, FIELD Headspace gauge, set of all 3 Dual slot vise jaw blocks Multi-tool barrel wrench
Retail $14.24 $8.26 $7.15 $8.45 $12.94 $14.24 $12.94 $14.24 $12.94 $4.23 $22.10 $22.10 $22.10 $63.64 $11.00 $46.80 Delryn punches are great for pushing out takedown and pivot pins. Sight tools are handy when zeroing in your sights. Dual slot vise jaw blocks hold standard and bull barrels in a vise and the armorers block kit holds an entire upper receiver safely in a vise without pinching. Multi-tool barrel wrench does almost everything for an upper receiver assembly. Stock spanner wrench incorporates a 1911 bushing removal tool. H2
Code MAN-1 MAN-2 MAN-3 WS16 WS16C WS4 WS4C WS-NO WSG-S WSG-T WSG-LB
Item Owners Manual, AR-15 / PCR Owners Manual, Pistol Cal Owners Manual, OA-93 / OA-98 Weapon Shield, 16 oz, 1 bottle Weapon Shield, 16 oz, case of 12 bottles Weapon Shield, 4 oz, 1 bottle Weapon Shield, 4 oz, case of 12 bottles Weapon Shield Needle Oiler Weapon Shield Grease Syringe Weapon Shield Grease - 2 oz. Tub Weapon Shield Grease - 1 lb. Tub
Retail $4.23 $2.93 $5.53 $19.95 $224.00 $11.99 $94.95 $10.99 $10.99 $9.99 $19.99
58
59
OA6-1 OA5B
Code OA7 OA4 OA6-1 OA6-2 OA6-3 OA6-4 OA2 OAM-7 Shirts & Hats OA5EXCEL OA5B OAHH
Description Protective rifle case, Black Armorers mat / mouse pad Sticker, color, 6.75 x 8.5, indoor only Sticker, color, 5 x 7 Sticker, color, 5 x 7, Stocking Dealer Sticker, color, 5 x 7, Dealer Distributor Patch, sew-on, full color Lapel pin, pewter, painted two-tone blue
OA6-3
T-shirt, screen printed, black with back design T-shirt, button up, blue, embroidered logos SIZES: S, M, L, XL, 2X, 3X, 4X - Sizes not always in stock. Ballcap,Camo w/black, sage or tan, velcro back
OA6-2
OA5EXCEL
60
61
PP FT M4 SS
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged flat top w/ picatinny rails Gas block w/ picatinny rails Fiberite carbine length M4 w/ heat shield 16 M4, button rifled, 416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 A2 flash suppressor M4, 6-point collapsible 32.25 / 6.34 lbs Dealer Complete Firearm Lew Horton Exclusive Retail
7.62 x 39mm
Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ rails 16, button rifled, 416 stainless steel 7.62 x 39mm Long-life non-chromed bore 1x10 Threaded muzzle end with thread protector cap. Silencer ready. M4, 6-point collapsible 31.5 / 6.77 lbs Dealer Complete Firearm CALL Retail CALL
1 (800) 388-3845
Sports South, LLC was the #1 distributor of Olympic Arms products in 2011! Lew Horton
K16 SST
Upper type: Front sight: Handguard: Barrel: Chambering: Bore: Twist rate: Muzzle: Stock: Length/Weight: Forged flat top w/ picatinny rails Gas block w/ picatinny rails Free floating aluminum tube w/ rails 16 bull, button rifled,416 stainless steel 5.56 nato Long-life non-chromed bore 1x9 Crown M4, 6-point collapsible 34.375 / 7.47 lbs Dealer Complete Firearm Sports South Exclusive CALL Retail CALL
Getting into a Distributor Exclusive is EASY. Once we agree on a configuration, all Olympic Arms requires is a 100 (DDs only 25) unit initial purchase, and guaranteed a minimum annual sale of just 250 (DDs 100) units total over the next 12 months. If you do not reach the sales requirements at the end of the year, that exclusive will be made available to all other distributors, thereby losing the exclusive, and the prestige and profits that came with it. Think caliber, think configuration, think application. Go high end, go low-budget, go tactical application, go hunting application. The AR is a virtual jigsaw puzzle of options, and the platform for thousands of post manufacture accessory sales that bring huge profits. Lets get something going now, while the time is right. If you have any questions or ideas, please give us a call.
1 (800) 388-3845
62
63
Olympic Arms, Inc 624 Old Pacific Hwy SE Olympia WA 98513 www.olyarms.com
OLYARMS.COM