Professional Documents
Culture Documents
Avionics Full-Duplex Switched Ethernet: History
Avionics Full-Duplex Switched Ethernet: History
Log in
Article Talk
Search
Main page Contents Featured content Current events Random article Donate to Wikipedia Interaction Help About Wikipedia Community portal Recent changes Contact Wikipedia Toolbox Print/export Languages Deutsch Franais Edit links
Avionics Full-Duplex Switched Ethernet (AFDX) is a data network for safety-critical applications that utilizes dedicated bandwidth while providing deterministic Quality of Service (QoS). AFDX is based on IEEE 802.3 Ethernet technology and utilizes commercial off-the-shelf (COTS) components. AFDX is a specific implementation of ARINC Specification 664 Part 7, a profiled version of an IEEE 802.3 network per parts 1 & 2, which defines how Commercial Off-the-Shelf networking components will be used for future generation Aircraft Data Networks (ADN). The six primary aspects of AFDX include full duplex, redundancy, deterministic, high speed performance, switched and profiled network.
Contents [hide] 1 History 2 Overview of AFDX 3 Virtual links 4 BAG Rate 5 Switching of Virtual Links 6 Usage 7 References 8 External links
History
Are you a developer? Try out the HTML to PDF API
[edit]
Many commercial aircraft use the ARINC 429 standard buses. This standard was developed in 1977 and is
pdfcrowd.com
widely used today, has proven to be highly reliable in safety critical applications. This data bus topology can be found on a variety of aircraft from Airbus, Boeing and Bombardier CSeries, including the Airbus A330, A340, A380, Boeing B737, B747, B757, B767 and the upcoming A350, Bombardier CSeries CS100 and CS300. ARINC 429 utilizes a unidirectional bus with a single transmitter and up to twenty receivers. A data word consists of 32 bits communicated over a twisted pair cable using the Bipolar Return-to-Zero Modulation. There are two speeds of transmission: high speed operates at 100 kbit/s and low speed operates at 12.5 kbit/s. ARINC 429 operates in such a way that its single transmitter communicates in a point-to-point connection, thus requiring a significant amount of wiring which amounts to added weight. Another standard, ARINC 629, introduced by Boeing for the 777 provides increased data speeds of up to 2 Mbit/s and allowing a maximum of 120 data terminals. This ADN operates without the use of a bus controller thereby increasing the reliability of the network architecture. The drawback of this system is that it requires custom hardware which can add significant cost to the aircraft. Because of this, other manufactures did not openly accept the ARINC 629 standard. AFDX is a next-generation aircraft data network (ADN). It is based upon IEEE 802.3 Ethernet and utilizes commercial off-the-shelf hardware thereby reducing costs and development time. AFDX is one implementation of deterministic Ethernet defined by ARINC Specification 664 Part 7. AFDX was developed by Airbus Industries for the A380,[1] initially to address real-time issues for flight-by-wire system development. [2] A similar implementation of deterministic Ethernet is used on the Boeing 787 Dreamliner. AFDX bridges the gap on reliability of guaranteed bandwidth from the original ARINC 664 standard. It utilizes a cascaded star topology network, where each switch can be bridged together to other switches on the network. By utilizing this form of network structure, AFDX is able to significantly reduce wire runs thus reducing overall aircraft weight. Additionally, AFDX provides dual link redundancy and Quality of Service (QoS).
Overview of AFDX
[edit]
AFDX adopted concepts (token bucket) from the telecom standard, Asynchronous Transfer Mode (ATM), to fix the shortcomings of IEEE 802.3 Ethernet. By adding key elements from Asynchronous Transfer Mode (ATM) to those already found in Ethernet, and constraining the specification of various options, a highly
open in browser PRO version
Are you a developer? Try out the HTML to PDF API
pdfcrowd.com
reliable Full-Duplex deterministic network is created providing guaranteed bandwidth and Quality of Service. Through the use of Full-Duplex Ethernet, the possibility of transmission collisions is eliminated. However, though bandwidth and maximum end-to-end latency and jitter, links are guaranteed, there is no guarantee of packet delivery [citation needed]. A highly intelligent switch, common to the AFDX network, is able to buffer transmission and reception packets. Through the use of twisted pair or fiber optic cables, Full-Duplex Ethernet uses two separate pairs or strands for transmit and receiving data. AFDX extends standard Ethernet to provide high data integrity and deterministic timing. Further a redundant pair of networks is used to improve the system integrity (although a VL may be configured to use one or other network only) It specifies interoperable functional elements at the following OSI Reference Model layers: Data Link (MAC and Virtual Link addressing concept); Network (IP and ICMP); Transport (UDP and optionally TCP) Application (Network) (Sampling, Queuing, SAP, TFTP and SNMP). The main elements of an AFDX network are: AFDX End Systems AFDX Switches AFDX Links
Virtual links
[edit]
The central feature of an AFDX network are its Virtual Links (VL). In one abstraction, it is possible to visualise the VLs as an ARINC 429 style network each with one source and one or more destinations. Virtual Links are unidirectional logic path from the source end-system to all of the destination end-systems. Unlike that of a traditional Ethernet switch which switches frames based on the Ethernet destination or MAC address, AFDX routes packets using a Virtual Link ID. The Virtual Link ID is a 16-bit Unsigned integer value that follows the constant 32-bit field. The switches are designed to route an incoming frame from one, and only one, End System to a predetermined set of End Systems. There can be one or more receiving End Systems connected within each Virtual Link. Each Virtual Link is allocated dedicated bandwidth [sum of all VL Bandwidth Allocation Gap (BAG)rates x MTU] with the total amount of bandwidth defined by the
open in browser PRO version
Are you a developer? Try out the HTML to PDF API
pdfcrowd.com
system integrator. However total bandwidth cannot exceed the maximum available bandwidth on the network. Bi directional communications must therefore require the specification of a complimentary VL. Each VL is frozen in specification to ensure that the network has a designed maximum traffic, hence determinism. Also the switch, having a VL configuration table loaded, can reject any erroneous data transmission that may otherwise swamp other branches of the network. Additionally, there can be subvirtual links (sub-VLs) that are designed to carry less critical data. Sub-virtual links are assigned to a particular Virtual Link. Data is read in a round robin sequence among the Virtual Links with data to transmit. Also sub-virtual links do not provide guaranteed bandwidth or latency due to the buffering, but AFDX specifies that latency is measured from the traffic regulator function anyway.
BAG Rate
[edit]
BAG stands for Bandwidth Allocation Gap, this is one of the main features of the AFDX protocol. This is the maximum rate data can be sent, and it is guaranteed to be sent at that interval. When setting the BAG rate for each VL, care must be taken so there will be enough bandwidth for other VL's and the total speed cannot exceed 100Mbit/s.
[edit]
Each switch has filtering, policing, and forwarding functions that should be able to process at least 4096 VLs. Therefore, in a network with multiple switches (cascaded star topology), the total number of Virtual Links is nearly limitless. There is no specified limit to the number of Virtual Links that can be handled by each End System, although this will be determined by the BAG rates and max frame size specified for each VL versus the Ethernet data rate. However, the number sub-VLs that may be created in a single Virtual Link is limited to four. The switch must also be non-blocking at the data rates that are specified by the system integrator, and in practise this may mean that the switch shall have a switching capacity that is the sum of all of its physical ports. Since AFDX utilizes the Ethernet protocol at the MAC layer, it is possible to use high performance COTS switches with Layer 2 routing as AFDX switches for testing purposes as a cost-cutting measure. However some features of a real AFDX switch may be missing such as traffic policing and redundancy functions.
open in browser PRO version
Are you a developer? Try out the HTML to PDF API
pdfcrowd.com
Usage
[edit]
The AFDX bus is used in Airbus A380, Boeing 787, Airbus A400M, Airbus A350, Sukhoi Superjet 100, AgustaWestland AW101, Irkut MS-21, Bombardier Global Express, Bombardier CSeries, Comac ARJ21,[3] AgustaWestland AW149.[4]
References
[edit]
1. ^ "AFDX technology to improve communications on Boeing 787" . militaryaerospace.com. 2005-04-01. Retrieved 2010-12-22. "AFDX, developed by Airbus engineers for the A380, is a standard that defines the electrical and protocol specifications, (IEEE 802.3 and ARINC 664, Part 7) for the exchange of data between avionics subsystems, Bruno says. One thousand times faster than its predecessor, ARINC 429; it builds upon the original AFDX concepts introduced by Airbus" 2. ^ "AFDX: Real-time solution on the A380" . EmbryRiddle Aeronautical University. October 2007. Retrieved 2010-12-22. 3. ^ "AFDX technology to improve communications on Boeing 787" . AFDX Products. Retrieved 2012-01-13. "AFDX data communications are used on the Airbus A380/A350/A400M, Boeing B787 Dreamliner (ARINC664), ARJ21 and Super jet 100." 4. ^ "Paris 2011: AgustaWestland asserts its independence in the cockpit" . Aviation International News (AINonline). Retrieved 2012-01-13. "The architecture adopted by AgustaWestland is centered around the AFDX data network developed for the latest commercial airliners. The AFDX high-speed digital bus has been developed as a specific implementation of ARINC 664 Part 7."
External links
ARINC Tutorials and Products Embvue AFDX | Arinc 664 AFDX Training AFDX/ARINC 664 Tutorial
V T E
pdfcrowd.com
V T E
[show ]
Avionics
This page w as last modified on 14 March 2013 at 20:53. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization. Contact us Privacy policy About Wikipedia Disclaimers Mobile view
pdfcrowd.com