Professional Documents
Culture Documents
Colamulse Tge
Colamulse Tge
benefits
• High oil level delivery
• High foam cleansers
• Easily rinsed
• Non-irritating
• Easily fragranced
• Lubricious application
• Soft afterfeel
• Long-term skin conditioning
typical description
properties Cola®Mulse TGE is designed to produce opaque emulsions of typical
triglyceride oils without the use of heat. Up to 30 wt.% of an oil can be fully
Appearance: Hazy viscous Liquid emulsified into water for a stable dispersion. The resulting product can be
Color, Gardner: 3 max. more fully viscosified with the inclusion of various polymeric agents such
pH, 10% Solution 8.5 – 9.5 as guar, xanthan, or cellulosic gums. The dispersion of these polymers into
a water phase followed by the addition of preblended Cola®Mulse TGE
Viscosity: < 5000 CPS
/ triglyceride can yield highly viscous, foaming products. Other actives
Solids: 48% – 52% such as humectants, alpha hydroxy acids, and proteins can be added to
the aqueous phase also. Care must be taken when using cationic materials
as these may destabilize the emulsion. Other oil soluble additives such as
vitamins, esters, and silicones can be included provided they are soluble
themselves in the oil of choice.
COMPOUND Wt. %
Phase A. Water 54.50
Cola®Lipid C 6.00
Cola®Moist 200 1.00
Cola®Mulse TGE 18.00
TOTAL 100.00
PROCEDURE:
Combine ingredients as shown in separate phases. Apply heat to
both sufficient to achieve a smooth mixture with stirring. Add Phase
B to Phase A with continued stirring until homogenous. Adjust pH
to 5.5 - 6.0 with citric acid. Stir-cool and add color, fragrance, and
preservative as needed.