Professional Documents
Culture Documents
Figure Syllabus 2013
Figure Syllabus 2013
Art 117 Email: [email protected] Office Hours: By appointment only Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
Student Information
Phone Number___________________________Health Concerns__________________________ College, Year____________________________Major________________________________ Reason for taking this course?
ART 397 (section 001): Ceramic Figure Sculpting Brian Weaver Art Studio Technician / Adjunct Faculty Office: Art 117 Email: [email protected] Office Hours: By appointment only Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
COURSE SYLLABUS
COURSE DESCRIPTION: This course is a perceptually based introduction to figure sculpture using fired clay as the medium. The class will include a study the human body and options for its representation in three dimensions. An orientation to building, surfacing, and firing ceramics and processes of handforming clay including: pinching, coil-building, slab building, modeling, and carving will be introduced. The class format will include slide and video presentations, two life model sequences, demonstrations, critiques, and team firings. The course includes three themes, each differing in focus: the perceptual, the gestural, and the interpretive style. Group lab work; loading, firing, and unloading class kiln firings is integrated into the structure of the course. ATTENDANCE POLICY: Tardiness, leaving early and absences will result in grade reduction: Three late arrivals will equal one absence. After the third absence, the final course grade will be lowered one full letter grade. After the fifth absence, the final course grade will be lowered two full letter grades. Seven or more absences will earn a failing course grade. If you are not present and prepared for class or critique you will be counted as absent for the day. Students are responsible for satisfying all academic objectives as defined by the instructor. Students who do not attend at least one of the first two class meetings of a course or laboratory in which they are registered, and who have not contacted the department to indicate their intent, may be dropped from the course. The university recognizes the right of the individual professor to make attendance mandatory. After due warning, professors may prohibit further attendance and subsequently assign a failing grade for excessive absences. Roll will be taken at the beginning of each class session, and is central to success in this course. Demonstrations, lectures, critiques, and
discussions will be scheduled for many class periods. Also, the ceramics process is one that cannot be rushed or neglected without consequences. Success in working with clay is skill based on and can be mastered through regular practice. Students who are absent due to illness should contact me and/or leave a message on my voice mail. Grading: Your grade will result from an evaluation of the following criteria: project grades, a cumulative glazing grade, participation in team firings, and participation in group critiques. Each project will be graded for technical execution, aesthetics, expression/concept, degree of difficulty. Attendance will be considered into your grade with more than three absences resulting in a grade drop. Ceramic work is fragile. Studio accidents or kiln issues may cause work to break. While all due care will be exercised, I must have finished work to assign a grade for a project. Work that blows up or is broken before completion will require re-making for grading. If your work is destroyed in progress, please show this to me and we will discuss what must be done to achieve a finished project for grading. In the case of involved projects where the loss is not the students fault, abridged project parameters may be negotiated and due dates adjusted. GRADING FORMAT: A = 100 90: Excellent work, work meets the requirements and goes above and beyond expectations. B = 89 80: Work meets all requirements to a high degree, and is presented in a meaningful fashion. C = 79 70: Work is average, meets all requirements minimally, presentation is satisfactory. D = 69 60: Work is below average, concepts are missing or not fulfilled, presentation lacks quality. F = 59 50: F Work receives a failing grade, unacceptable and insufficient work. LATE WORK: All projects, reading responses, and research projects must be completed on time for full credit. Specific due dates are stated on each project sheet and are announced in class. Failure to complete any project on time will result in a drop of one full letter grade, and failure to complete any other assignment, such as response papers, in-class exercises, or other class work, on time will result in a drop of letter grade for each day it is late. If the time line states that a project is due at the beginning of class, turning it in at the end or after class is considered late. You must have work finished and installed before the start of class on critique days or your work will not be critiqued and your project grade will be lowered. It is the students responsibility to turn in all work on time. The ceramic process requires that green ware be completely fabricated and detailed, then dried for several days, depending upon scale and complexity. Please finish building all wet work on time for green ware due dates and manage the careful drying of your work so that you can meet all deadlines. Clay requires your regular attention to achieve good results. It cannot be rushed or neglected. Full participation by showing completed work during all critiques is required along with active participation through shared ideas and commentary. EVALUATION: In addition to specific criteria defined by individual project goals, all projects will be graded on their success in the following areas: concept development, use of design decisions to support your concepts, craftsmanship, and meeting deadlines for building, firing and critique. As previously mentioned, a
sketchbook is required for recording notes and ideas and the work must be finished within the specified deadlines. Concept / Idea: This pertains to the ability to discover and define design problems and issues in a clear and consistent language. Solution: This pertains to the quality of your Visual and Conceptual Solution. Factors such as composition, inventiveness, originality, layout and craft will be considered in grading. Class work: You are required to keep all information related to this class in your sketch book and should photocopy the pages to create a presentation for the process of each project. Quantity (yes, sometimes over quality) and innovation are important factors. The more you do, the better your design will be. Craft: I will not accept work that does not meet the required presentation standards (which are listed on each individual project sheet). Also important in considering project grades: Failure to meet deadlines will result in a zero. For situations that are called to my attention in advance, something can be arranged. You should always plan ahead. Grades will also be influenced by the following criteria: evolution from proposal to finished work, aesthetic concerns, and adherence to assignments, craftsmanship, skills development, conceptual rigor, experimentation, inventiveness, risk-taking, personal investment, and critical discussions. Reading and Reference Materials: Textbook: Portrait Sculpting: Anatomy and Expressions in Clay (Required) authors Philippe and Charisse Faraut, PCF Studios, Inc. 2004, ISBN: 0-9755065-0-1. Anatomy for the Artist, Author Sarah Simbley, published by DK Publishing. This is an excellent anatomy book which will be very helpful to you and is recommended for the class. Modeling the Figure in Clay, author Bruno Luchessi. Review this prior to beginning the figure modeling projects. Additional books (not required) The Craft and Art of Clay author Susan Peterson and Hands in Clay, author Charlotte Speight (are excellent texts for information for building and glaze techniques). Ceramic Figures: A Directory of Artists by Michael Flynn (Rutgers Press) is an excellent overview of international contemporary ceramic sculptors who work with the human figure. Also recommended is Anatomy for Artists or any other comparable book on the topic. MATERIALS: The materials and tools students will need during the course of the semester will vary from project to project. Required materials and tools will be discussed at the beginning of each project phase and will be kept to a minimum. Project-specific materials and costs will largely be left up to students to determine and manage. There are many available and cost-effective resources online and at the campus bookstore, which will be discussed in class. These items will not only prepare you for this course, but are designed to be functional beyond it. Supplies: Bound sketchbook, small bucket, cut off wire, needle tool, metal rib, clay shapers Michael Sherrill Ribs *red (Highwater Clay), wax modeling tools ss153 (Sculpture House), metal serrated rib, trimming tool, small sponge, clean up sponge, plastic (to cover work in progress for controlled drying), rolling pin (optional), turntable/lazy susan (metal at Home Depot or Lowes), Kemper Mini Ribbon Sculpting Tools/Set, three wooden sculpting tools (JA 15, JA 18, JA 24 shown in class), scalpel, patching spatula, calipers (optional), ruler, blow dryer, small lidded container for slip, paint brushes, make-up sponges, a lock for your locker.
Safety: Please wear shoes and proper attire, tie back hair and loose clothing when working around shop equipment. Wear a respirator if mixing clay, or glaze materials. A proper respirator is required when spraying glazes. Lockers: Lockers must be cleaned out and locks removed by the end of finals or the contents will be considered abandoned. However, if you are returning please note this on the locker door and your belongings will not be disturbed. Studio Courtesy: Please leave the studio clean. Regardless of the condition you find it in, we request that you leave it clean for the next person. Remember to place all work in progress on the storage shelves. Leave the work tables clear and clean. This is a shared studio and we all need to work together to keep it a clean and productive environment. Academic Honesty: Cheating and illegal use of copyrighted material is not tolerated. ACCOMMODATIONS FOR STUDENTS WITH DISABILITIES: Students requesting classroom accommodation must first register with the Dean of Students Office. The Dean of Students Office will provide documentation to the student who must then provide this document to the instructor. The instructor will make appropriate accommodations for any student with a disability. Please speak with the instructor about any concerns. OTHER GUIDELINES: The instructor, the Art Department and specifically the Ceramics Department are not responsible for student work left in workspaces, installation spaces, the critique space, the shops, or the classrooms. Projects/materials are not to be stored in the group working space. Each student is responsible for ensuring that his/her projects and materials are safely stored, displayed, installed, and removed from the classroom and critique space. Projects must be set up and removed from the critique space at the times and spaces designated for each project. Students must check their school email accounts regularly. Students are responsible for any information, deadlines, and updates emailed to their webmail accounts. Students should check with the instructor or another student outside of class time when they miss a class (prior to missing the class if possible), as in- and out-of-class exercises are spontaneously assigned. Students should bring a doctors note for any class from which they expect to be excused. Please address any concerns, problems, and questions regarding this class to the instructor as they arise. Outside class, the instructor is available during office hours, by making an appointment for another time, or through email. Students can expect a response to email within 24 hours. Always be open-minded when considering new ideas and constructive criticism. Critique ideas; not people. No side conversations during presentations or critiques. Do not use cell phones or iPods (or other headphones) during class time. No text messaging. Also please turn cell phones off or ringers off during class time, before you arrive to class. Disruptive Behavior: Be advised that you can and will be dismissed from class if you engage in disruptive behavior. Students who intentionally act to impair,
interfere with, or obstruct the mission, purposes, order, operations, processes, and functions of the University shall be subject to appropriate disciplinary action by University authorities for misconduct, as set forth in the applicable rules of the Board of Regents and the University and state law governing such actions. Philosophy: Texas A&M University -Commerce is an institution which encourages the intellectual and personal growth of its students as scholars and citizens. As an educational institution, the University recognizes that the transmission of knowledge, the pursuit of truth, and the development of individuals requires the free exchange of ideas, self-expression, and the challenging of beliefs and customs. In order to maintain an environment where these goals can be achieved safely and equitably, the University promotes civility, respect and integrity among all members of the community. As stated in the Standard of Ethical Conduct, students are expected to exhibit high standards of behavior and concern for others. Course Structure (Methods of Instruction): This class meets twice a week for a period of 3 hours each session. It encompasses brief lectures, projects, group discussion / critique, reading / writing exercises, and group presentation(s). Participation is required and is imperative to your final grade.
ART 397 (section 001): Ceramic Figure Sculpting Brian Weaver Art Studio Technician / Adjunct Faculty Office: Art 117 Email: [email protected] Office Hours: By appointment only Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
PROJECT 1: THE PERCEPTUAL This project focuses on the direct study of the human figure using a personalized plaster cast. Personalized Body Cast of Hand(s) or Feet: In this project, you will sculpt from life using a plaster cast of your body and will double the size (at minimum) of the original casting and replicate it in clay. Each student will create a life-cast or his/her hands or feet. Consider the pose and gesture of the hand or foot. If you are doing two hands or both feet please pose them together to be cast as one compositional unit. The body casting will be done with alginate. The alginate mold will be cast in #1 molding plaster to create the plaster model. The alginate mold is a nonpermanent mold that is cut away when the plaster model cures. The result will be a personalized plaster cast. When the life casting is completed you are to sculpt a life-scale maquette (sketch in clay) to practice modeling and fine-tune your perceptual skills. Look for relative proportions, composition in the round, effects on volumes in the round. With this study model complete you will move to the large
sculpture. The final sculpture will be modeled solid and then hollowed at the leatherhard state. This is a traditional technique for life modeling used to create many of the terra cotta sculptures in the Renaissance. The technique of working solid allows the use of both additive and subtractive methods of sculpting. Detail will be developed as the sculpture becomes leather hard. After detail is completed, the sculpture will be sectioned to hollow it before firing. Terra sigillata will be applied to the sculpture at the bone-dry state. The piece will be bisque-fired and glaze patinas will be rubbed into the surface after which the sculpture will be glaze-fired. Size: 14-16 or 2 times life scale. Scaling the larger sculpture accurately will be discussed in class Materials: Some special materials are required for this project: alginate (a nonpermanent and gelatin-like casting material often used in Dental Offices), plastic container of appropriate size to be used as a rigid holder for the alginate, and #1 molding plaster. The #1 molding plaster will be provided through the bookstore and will be available to you in the ceramics lab for a competitive price. It is to be purchased at the UF Bookstore and the receipt brought to the lab for dispensing. Goals: This project will be evaluated for accuracy in representing the dimensional relationships present in the original plaster model, proportions, depth, and transitions. The realism, articulation of form, detailing and anatomical structure will be evaluated. Dates: Thursday, August 27th Bring tools, a container for making mold of body part, and alginate to class. Thursday, September 3 Small life-size maquette is due. We will start our large-scale hands. Tuesday, September 8th Body part studies are due wet. Well take a quick look at them as a class. Thursday, September 22th Critique ART 397 (section 001): Ceramic Figure Sculpting
Brian Weaver Art Studio Technician / Adjunct Faculty Office: Art 117 Email: [email protected] Office Hours: By appointment only
Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
PROJECT 2: THE PORTRAIT HEAD Exercise 1: Human Skull Study Read textbook pages 10-30, Faraut. Video will be shown in class. You will begin your sculpting experience by reading and studying the illustrations for the technique used by Philippe Faraut to sculpt the human skull and muscle structure of the human head. A supplementary video showing this process will be shown in class. This objective of this study is to learn the human anatomy so that you fully understand what creates the structure of the human head and neck and why we move as we do. In this study you will be using the Faraut technique of solid modeling the skull. Skulls will be modeled at one-half of life size. Exercise 2: Pinched Portraits Study Read textbook pages 38-69. Video will be shown in class, Bova and Faraut the features. (Artists of reference are Joe Bova, Arthur Gonzales and Judy Moonelis). A portrait will be done of a selected classmate as an in class project. An orientation to thinking in the third dimension will be practiced by pinching the form and moving the clay wall in and out like a skin. Your understanding of the skeletal and muscle structures learned in the last sculpture will inform your use of this new technique. The portrait studies will be modeled at onehalf of life size. 3-5 in size SLAB-BUILT SELF PORTRAIT PROJECT: Read textbook pages 102-125 and 130-141. Video will be shown in class, Faraut on creating a likeness and common mistakes. These Portrait sculptures are to be modeled 3/4 life size to life-size in scale. This project will be evaluated for likeness, proportions, sculptural depth and mass conveyed, and smoothness within volumetric transitions. You will be asked to provide photos of your head in the round and a mirror. Photos should include a shot of each profile, , front, back and top views of your head. Put all photos on a reference board to bring to class. These will be your perceptual resources for the project. A demonstration of how to build using stacked slabs will be shown in class. You will be working hollow and bending the clay in and out by pinching the walls. The two previous exercises will lead you to understand structure and working hollow. This project will center upon developing perceptual skills.
The sculpture will be surfaced by underglaze or staining and covered with a shop glaze. Test tiles are available for view in the glaze lab. Metallic or stone glaze suggested also. A glaze demonstration will be done in class. Dates: Thursday, September 15th Begin skull studies Tuesday, October 3rd Begin pinched portrait studies Thursday, October 6th Begin self portraits Thursday, November 3rd Critique ART 397 (section 001): Ceramic Figure Sculpting Brian Weaver Art Studio Technician / Adjunct Faculty Office: Art 117 Email: [email protected] Office Hours: By appointment only Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
PROJECT 3: FIGURE IN CLAY: FEMALE A female life model will pose for class as the subject of your sculpture. The modeling sessions will be scheduled during all class periods of the threeweek project. The female figure will be in a reclining pose to limit considerations of gravity. Building Method: Modeled solid and hollowed. Size: The size limitation on the figure is 24" across. Resources: A videotape showing the sculpting process of contemporary Italian sculptor Bruno Luchessi will be shown to offer a demonstration of tools and methods. You are required to review the illustrated books by Luchessi (on reserve for this class in the FAA library) - modeling the figure and the terra cotta portrait. Materials: Please find or purchase a flat board 1/2" or 5/8" in thickness to be used for a surface to build on. Thinner boards will warp. It is suggested that the board is sealed with Thompsons Water Seal and/or covered with canvas (either will keep the board flat). A turntable or lazy susan is required. You also might find wood carving tools interesting to experiment with at this time (reference
the Lucchesi video). Surfacing: You can use terra sig and patinas or underglazes and stain with an overglaze or glaze. Criterion for grading: Anatomical accuracy, proportion, and gesture will be evaluated and discussed as you work. Dates Tuesday, October 15th First day of female model Thursday, October 27th Last day of female model Thursday, November 24th Critique
ART 397 (section 001): Ceramic Figure Sculpting Brian Weaver Art Studio Technician / Adjunct Faculty Office: Art 117 Email: [email protected] Office Hours: By appointment only Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
PROJECT 4: FIGURE IN CLAY: MALE During this second figure modeling sequence the group will have a voice in the pose selected (perhaps seated or standing). The model scheduled is to be male, to offer an experience with a different figure type and anatomical articulation. This project will focus on developing modeling style and increasing the size of the sculpture. Building Method: Option to work solid or with slabs and pinch. Size: The size of this vertical figure will be increased to 20- 30 H.
Resources: Slides will be shown in class of ceramic figure sculptors who work within an academy style or with evident anatomical consideration including: Doug Jeck, Ron Meuch, Joseph Chinard, August Rodin and others. Choose a figurative sculptor (realist) whose aesthetic style captures your interest. The artist can be from any period in Art History or a contemporary figurative sculptor. The sculptor does not have to work exclusively in clay. Goals: This assignment requires that you research the style of the sculptor by looking at, at least ten sculptural pieces by the artist. Choose one piece and do a drawing where you note proportions and body type. Analyze it and list the elements of the sculptural style including; massiveness, gesture, articulation (hair, eyes, hands) simplification, posture, draped/nude, facial expression, etc. Incorporate this sculptural style into the life sculpture of the male figure. The sculpture is to remain anatomically correct and as life-like and realistic as your skills and perception will permit. The style for modeling, however, might emulate Rodin, loose and flowing, might reflect Donatellos style tight and linear (compare to Ingres in drawing) or like Michelangelos muscular articulations; massive hard and robust. Surfacing: You can use terra sig and patinas or underglazes and stain with an overglaze. Dates Tuesday, November 10th First day of male model Tuesday, November 17th Last day of male model Tuesday, December 8th Critique
ART 397 (section 001): Ceramic Figure Sculpting Brian Weaver Art Studio Technician / Adjunct Faculty Office: Art 117 Email: [email protected] Office Hours: By appointment only Texas A&M University Commerce Summer 2013 Phone: 814-657-5867 Wathena Temple Ceramics Lab
Course Schedule
Tuesday August 25 Thursday August 27 Tuesday Septembe r1 Thursday Septembe r3 Tuesday Septembe r8 Thursday Septembe r 10 Introduction to the course and syllabus review Introduction Project #1 Alginate Demo Start hand/foot maquettes Hand/Foot Maquettes due Start big hands/feet HW Continue developing sculpture In Class Work Day on big hands/feet
HW Continue developing sculpture
Last Day for Big Hands/Feet Introduction Project #2 Faraut video will be shown in class In Class Work Day on Exercise 1: Human Skull Study FIELD TRIP Florida Museum of Natural History and the Harn Museum
Last day for Exercise 1 Human Skull Study Faraut video will be shown in class Load Bisque for Project #1, Tuesday Fire Bisque, Thursday Unload Glaze Project #1 Thursday/Friday Load and Fire Glaze Kiln for Project #1
Critique for Project #1 In Class Work Day on Exercise 2: Pinched Portraits Study
r 24 Tuesday Septembe r 29 Thursday October 1 Tuesday October 6 Thursday October 8 Tuesday October 13 Thursday October 15 Tuesday October 20 Thursday October 22 Tuesday October 27 Thursday October 29 Tuesday November 3 Thursday November 5 Tuesday November 10
In Class Work Day on Exercise 2: Pinched Portraits Study Last day for Exercise 2: Pinched Portraits Study Faraut video will be shown in class In Class Work Day on Self Portraits In Class Work Day on Self Portraits Last day for Self Portraits Introduction Project #3 Bruno Luchessi video will be shown in class HW- Dry Self Portrait Sculptures Model Session 1 female HW Dry Self Portrait Sculptures Model Session 2 female Load Bisque Kiln for Project #2 (skull, pinched portraits, Self Portrait), Fire Tuesday, Unload Thursday Model Session 3 female HW Glaze skull and pinched portraits for glaze test kiln (to be loaded Thursday, fired Friday, unloaded Saturday) Model Session 4 female: Last Day with female model Discuss glaze results HW Glaze portraits (to be loaded after class on Thursday) Introduction Project #4 Slide Lecture: Contemporary Ceramic Sculptors Critique for Project #2
Model Session 5 male HW Dry Project #3 Model Session 6 male Sketches due for Project #4 HW Dry Project #3
Thursday November 19 Tuesday November 24 Thursday November 26 Tuesday December 1 Thursday December 3 Tuesday December 8
Model Session 7 male HW Glaze Project #3 over the weekend Load Bisque Kiln for Project #3 and glaze test tiles (Fire Thursday, Unload Friday) Model Session 8 male: Last Day with male model Load Glaze Kiln for Project #3 (Fire on Tuesday, Unload Thursday) HW Dry Project #4 Unload glaze kiln and clean shelves, Dry Project #4 ---------------------Last Day of Wet Work----------------------Visiting Artist: Anne Drew Potter Must be present for our class time and Lecture Critique for Project #3
THANKSGIVING HOLIDAY
In Class Work Day Demo for cold-worked Surfaces Bisque Project #4, load in Class (Fire Friday, unload Sat. or Sun.) Class work - Apply surface to Project #4 for Thursdays critique Class cleaning assignment Last Day of Class Critique for Project #4 Clean up classroom, shelves, lockers