PPG Sigmacover 280 (Base) (En)
PPG Sigmacover 280 (Base) (En)
PPG Sigmacover 280 (Base) (En)
: :
SIGMACOVER 280 BASE For further information see Technical Data Sheet.
1.2 Relevant identified uses of the substance or mixture and uses advised against Recommended use : coating
1.3 Details of the supplier of the safety data sheet : PPG Coatings SPRL/BVBA Company Noordersingel 23 B-2040 Borgerhout : +32 3 3606470 Telephone : +32 3 3606435 Telefax : [email protected] E-mail address
+31 20 4075210
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture R10 Xn; R48/20, R20/21 R43 Xi; R36/38 R52/53 Flammable. Harmful: danger of serious damage to health by prolonged exposure through inhalation., Harmful by inhalation and in contact with skin. May cause sensitization by skin contact. Irritating to eyes and skin. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
2.2 Label elements The product is classified and labelled in accordance with Directive 1999/45/EC.
Harmful Hazardous components which must be listed on the label: xylene reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700 < MW < 1000) Quartz (SiO2) (< 5 m)
1/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
R-phrase(s)
Flammable. Harmful by inhalation and in contact with skin. Irritating to eyes and skin. May cause sensitization by skin contact. Harmful: danger of serious damage to health by prolonged exposure through inhalation. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S-phrase(s)
Do not breathe spray. Wear suitable protective clothing and gloves. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid release to the environment. Refer to special instructions/ Safety data sheets. Contains epoxy constituents. See information supplied by the manufacturer.
P-phrase(s)
3. COMPOSITION/INFORMATION ON INGREDIENTS
EC No. 215-535-7
CAS-No. 1330-20-7
Note Nota C
CLP Classification Concentration Flam. Liq.3; H226 Acute Tox.4; H332 Acute Tox.4; H312 Skin Irrit.2; H315 Flam. Liq.2; H225 Acute Tox.4; H332 Flam. Liq.3; H226 STOT SE3; H336 Repr.2; H361fd Acute Tox.4; H302 Skin Corr.1B; H314 Aquatic Acute1; H400 Aquatic Chronic1; H410 >=12.50 - <20.00%
ethylbenzene
202-849-4
100-41-4
>=2.50 - <10.00%
1-methoxy-2-propanol
203-539-1
107-98-2
>=2.50 - <10.00%
nonylphenol
246-672-0
25154-52-3
>=1.00 - <2.50%
2/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
aluminium
231-072-3
7429-90-5
F; R11, R15
>=2.50 - <10.00%
Quartz (SiO2) (< 5 m) reaction product: bisphenol-A(epichlorhydrin); epoxy resin (number average molecular weight 700 < MW < 1000)
238-878-4
14808-60-7 25068-38-6
* Candidate List of Substances of Very High Concern for Authorisation Producer declares that for R-phrases not mentioned in chapters 3, the entire amount of hazardous substances is below limits. If multiple components with identical identifiers appear, these have different hazardous properties, e.g. flashpoint.
4.1 Description of first aid measures : General advice Eye contact Skin contact : :
Inhalation
Ingestion Burns
: :
When symptoms persist or in all cases of doubt seek medical advice. Never give anything by mouth to an unconscious person. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Remove contact lenses. Seek medical advice. Take off all contaminated clothing immediately. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners. Remove to fresh air. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery position and seek medical advice. If accidently swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting. If spills on clothing catch fire, wash with plenty of water. Remove loose clothing. Do not remove clothing that has melted to the skin.Obtain medical attention.
4.2 Most important symptoms and effects, both acute and delayed In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Show this safety data sheet to the doctor in attendance.
4.3 Indication of immediate medical attention and special treatment needed Never give anything by mouth to an unconscious person. Treat symptomatically.
5. FIRE-FIGHTING MEASURES
3/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
Suitable extinguishing media Extinguishing media which shall not be used for safety reasons
: :
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Keep containers and surroundings cool with water spray. Do NOT use water jet.
5.2 Special hazards arising from the substance or mixture : As the product contains combustible organic components, fire will produce Specific hazards during fire dense black smoke containing hazardous products of combustion (see section fighting 10). Exposure to decomposition products may be a hazard to health. Cool closed containers exposed to fire with water spray. Do not allow run-off from fire fighting to enter drains or water courses. 5.3 Advice for firefighters Special protective equipment for fire-fighters
6.1 Personal precautions, protective equipment and emergency procedures : Use personal protective equipment. Ventilate the area. Refer to protective Personal precautions measures listed in sections 7 and 8. Wear respiratory protection. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Remove all sources of ignition. 6.2 Environmental precautions Environmental precautions
Try to prevent the material from entering drains or water ways. If the product contaminates rivers and lakes or drains inform respective authorities.
6.3 Methods and materials for containment and cleaning up : Clean with detergents. Avoid solvents. Contain and collect spillage with nonMethods for cleaning up combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). : Refer to section 15 for specific national regulation. Additional advice 6.4 Reference to other sections For personal protection see section 8.
Avoid exceeding of the given occupational exposure limits (see section 8). Use only in area provided with appropriate exhaust ventilation. Avoid contact with skin, eyes and clothing. Smoking, eating and drinking should be prohibited in the application area. Avoid inhalation of vapour or mist. For personal protection see section 8.
4/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
Prevent the creation of flammable or explosive concentrations of vapour in air and avoid vapour concentration higher than the occupational exposure limits. When transferring from one container to another apply earthing measures and use conductive hose material. No sparking tools should be used. Operators should wear anti-static footwear and clothing and floors should be of the conducting type. Isolate from sources of heat, sparks and open flame. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). The product should only be used in areas from which all naked lights and other sources of ignition have been excluded. No smoking. The accumulation of contaminated rags and dry overspray, particularly in spray booth filters, may result in spontaneous combustion. Good housekeeping standards, regular safe removal of waste materials and regular maintenance of spray booth filters will minimise the risks of spontaneous combustion and other fire hazards.
7.2 Conditions for safe storage, including any incompatibilities : Observe label precautions. Prevent unauthorized access. Containers which Requirements for storage areas are opened must be carefully resealed and kept upright to prevent leakage. and containers Store between 0 and 35C (32 - 95 F) in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Solvent vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air. Electrical installations / working materials must comply with the technological safety standards. Keep away from sources of ignition - No smoking. Store in accordance with the particular national regulations (see section 15). : Keep away from oxidising agents and strongly acid or alkaline materials. Advice on common storage 7.3 Specific end uses For further information see Technical Data Sheet.
8.1 Control parameters Components on the national list and/or the European TLV list (98/24/EC):
Components xylene Indicative Indicative can be absorbed through skin ethylbenzene Indicative Indicative can be absorbed through skin 1-methoxy-2-propanol Indicative Indicative can be absorbed through skin
CAS-No. 1330-20-7
100-41-4
442 884
100 200
107-98-2
375 568
100 150
5/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
Respiratory protection
Hand protection
When operators, whether spraying or not, have to work inside the spray booth, ventilation is unlikly to be sufficient to control particulates and solvent vapour in all cases. In such circumstances they should wear a compressed airfed respirator during the spraying process and until such time as the particulates and solvent vapour concentration has fallen below the exposure limits. For prolonged or repeated contact use protective gloves. Barrier creams may help to protect the exposed areas of skin, they should however not be applied once exposure has occurred. Skin should be washed after contact. Use chemical resistant gloves classified under Standard EN 374: Protective gloves against chemicals and micro-organisms. Recommended gloves: Viton (R) Minimum breakthrough time: 480 min The recommended gloves are based on most common solvent in this product. When prolonged or frequently repeated contact may occur, a glove with a protection class of 6 (breakthrough time greater than 480 minutes according to EN 374) is recommended. When only brief contact is expected, a glove with a protection class of 2 or higher (breakthrough time greater than 30 minutes according to EN 374) is recommended. NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled,physicalrequirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glovematerials, as wellas the instructions/specifications provided by the glove supplier.
: :
Chemical resistant goggles must be worn. Personnel should wear protective clothing. Skin should be washed after contact. Working clothes must not consist of textiles, which show a dangerous melting behaviour in case of fire. Workers should wear antistatic footwear.
Additional advice Environmental protection : Refer to national regulations in chapter 15 for regulations on environmental protection.
Please contact your personal protection equipment supplier for further advice
9.1 Information on basic physical and chemical properties : viscous Form : Colour : mild aromatic Odour
6/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
pH Flash point
: :
29.3 C Note: see user defined free text 8.2 %(V) 357.04 g/m3 1.1 %(V) 48.46 g/m3 1.41 g/cm3 at 20 C practically insoluble > 430 C 1,000 mPa.s at 23 C >= 60 s Transversal section: 6 mm Method: ISO 2431 (EN 535) 6 mm CUP
Density
: : : :
10.1 Reactivity No dangerous reaction known under conditions of normal use. 10.2 Chemical stability Stable under normal conditions. 10.3 Possibility of hazardous reactions Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.Avoid moisture.Preparation reacts slowly with water resulting in evolution of hydrogen. 10.4 Conditions to avoid Avoid temperatures above 60C (140 F), direct sunlight and contact with sources of heat. 10.5 Incompatible materials Incompatible with strong acids and bases. Incompatible with oxidizing agents. 10.6 Hazardous decomposition products In case of fire hazardous decomposition products may be produced such as: Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke.
7/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
11.1 Information on toxicological effects : There is no data available for this product. Product information The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. See Sections 3 and 15 for details. Acute oral toxicity Acute inhalation toxicity : : May cause nausea, abdominal spasms and irritation of the mucous membranes. Exposure to component solvent vapours concentration in excess of the stated occupational exposure limit may result in adverse health effects. Such as: mucous membrane irritation, respiratory system irritation, adverse effects on kidney, liver and central nervous system. Symptoms and signs: headache, dizziness, fatigue, muscular weakness, drowsiness and in extreme cases loss of consciousness. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin resulting in desiccation of the skin. The product may be absorbed through the skin. Irritating to eyes. There is no data available for this product.
Skin irritation
: :
Acute Toxicity Data for Components nonylphenol(25154-52-3) Acute oral toxicity Acute inhalation toxicity : : LD50: 1,620 mg/kg (rat) LC50: 2 mg/l (rat)
No data is available on the product itself. The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and is classified for ecotoxicological properties accordingly. See sections 3 and 15 for details. The product should not be allowed to enter drains, water courses or the soil.
12.2 Persistence and degradability No information available. 12.3 Bioaccumulative potential No information available. 12.4Mobility in soil No information available. 12.5 Results of PBT and vPvB assessment No information available. 12.6 Other adverse effects No information available.
8/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
The product should not be allowed to enter drains, water courses or the soil. Disposal together with normal waste is not allowed. Special disposal required according to local regulations. The European Waste Catalogue classification of this product, when disposed of as waste is: 08 01 11* Waste paint and varnish containing organic solvents or other dangerous substances.
If this product is fully cured or mixed with other wastes, this code may no longer apply. If mixed with other wastes, the appropriate code should be assigned. For further information contact your local waste authority
14. TRANSPORT INFORMATION ADR 1263 PAINT 3 III IMDG 1263 PAINT 3 III EmS: F-E, S-E Limited quantity: Max. per inner pack. : 5.00 L Max. per outer pack. : 30.00 KG IATA 1263 PAINT 3 III -
14.1 UN-Number 14.2 UN proper shipping name 14.3 Transport hazard class(es) 14.4 Packing group 14.5 Environmental hazards Other information
Limited quantity: Max. per inner pack. : 5.00 L - Max. per outer pack. : 30.00 KG
14.5 - Envir. Hazardous, Labels Only = Environmentally hazardous Note ADR: If pack sizes less than 450L, under the terms of 2.2.3.1.5, this product is not subject to the provisions of ADR. IMDG: If pack sizes up to and including 30L, under the terms of 2.3.2.5, this product is not subject to the packaging, labelling and marking requirements of the IMDG code, but both full documentation and placarding of cargo transport units is still required.
14.6 Special precautions for users Transport within user's premises: always transport in closed containers that are upright, labelled and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code No information available.
9/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture National legislation : Further information No information available. 15.2 Chemical Safety Assessment The information contained in this safety data sheet does not constitute the user's own assessment of workplace risks, as required by other health and safety legislation. The provisions of the national health and safety at work regulations apply to the use of this product at work.
16.1 Other information Explanation of R-phrases mentioned in section 3 xylene R10 R20/21 R38 H226 H332 H312 H315 ethylbenzene R11 R20 H225 H332 1-methoxy-2-propanol R10 R67 H226 H336 nonylphenol R22 R34 R62 R63 R50/53 Flammable. Harmful by inhalation and in contact with skin. Irritating to skin. Flammable liquid and vapour. Harmful if inhaled. Harmful in contact with skin. Causes skin irritation. Highly flammable. Harmful by inhalation. Highly flammable liquid and vapour. Harmful if inhaled. Flammable. Vapours may cause drowsiness and dizziness. Flammable liquid and vapour. May cause drowsiness or dizziness. Harmful if swallowed. Causes burns. Possible risk of impaired fertility. Possible risk of harm to the unborn child. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Suspected of damaging fertility. Suspected of damaging the unborn child. Harmful if swallowed. Causes severe skin burns and eye damage. Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects.
10/11
SAFETY DATA SHEET This Safety Data Sheet is prepared in accordance with Annex I to Regulation (EC) No. 453/2010.
aluminium
Highly flammable. Contact with water liberates extremely flammable gases. In contact with water releases flammable gases. Flammable solid Harmful: danger of serious damage to health by prolonged exposure through inhalation.
R48/20
reaction product: bisphenol-A(epichlorhydrin); epoxy resin (number average molecular weight 700 < MW < 1000)
R43 R36/38
This Safety Data Sheet is based on the Safety Data Sheets obtained from the producer/manufacturer or/and internet databases and valid regulations considering hazardous substances/preparations. Training advice: Persons taking part in a turnover of hazardous products ought to be trained in product handling, safety and hygiene. Drivers ought to be trained and obtain a certificate in accordance with the requirements of transport regulations (ADR). Version: 4 Revision date13.10.2010
The information contained in this safety data sheet is based on the present state of knowledge and current European and National legislation at the date of issue. The supplier reserves the right to modify data on the safety data sheet without further notice. Any change in data will normally be followed by the issue of a new safety data sheet. The user should check the date of issue and if more than 12 months have elapsed, then the data should only be used after checking with the nearest sales office of the supplier to establish that the data is still valid. As the specific conditions of use of the product are outside the suppliers control, the supplier is not reponsible for the (negative) consequences of these specific conditions of use, which are outside of the suppliers control and which are not compliant with the handling, storage and other instructions in this safety data sheet. After all component(s) stated on the relevant Technical Data Sheet have been mixed the safety precautions mentioned on each of the component(s) safety data sheets and labels should be used in assessing the safety precautions of the mixed product. Technical data sheet number7417
11/11