18 x12 ABC A
18 x12 ABC A
D. all the above answers are correct Cost concepts Committed vs. Discretionary fixed costs Commited fixed costs 7. Which of the following is an example of a committed fixed costs? A. direct materials C. supervisors salary B. depreciation on a factory building D. insurance on a building 16. An example of a committed fixed cost is: A. a training program for salespersons. B. executive travel expenses. C. property taxes on the factory building. D. new product research and development. Discretionary fixed cost 8. Which of the following is an example of discretionary fixed cost? A. direct labor C. property taxes on a factory building B. insurance on a building D. depreciation on a factory building Controllable costs 10. Controllable costs are: A. Costs that management decides to incur in the current period to enable the company to achieve operating objectives other than the filling of orders placed by customers. B. Costs that are governed mainly by past decisions that established the present levels of operating and organizational capacity and that only change slowly in response to small changes in capacity. C. Costs that will unaffected by current managerial decisions. D. Costs that are likely to respond to the amount of attention devoted to them by a specified manager. 11. Controllable costs for responsibility accounting purposes are directly influenced only by A. A given manager within a given period. B. A change in activity. C. Production volume. D. Sales volume. Imputed costs
227
THEORIES: Basic concepts Cost Accounting 1. Cost accounting involves the measuring, recording, and reporting of A. product costs C. future costs B. manufacturing process D. managerial accounting decisions Cost management 3. The cost management function is usually under A. the chief information officer. C. purchasing manager. B. treasurer. D. controller. 2. The cost management information system provides information A. that the accountant needs to prepare the financial statements. B. that the manager needs to effectively manage the firm. C. that the manager needs to effectively manage not-for-profit organization. D. b and c. 4. The main focus of cost management information must be A. usefulness and accuracy. C. usefulness and timeliness. B. timeliness and accuracy. D. relevance and good format. 5. With regard to the task of managements decision making, cost management information is needed to A. make sound strategic decisions regarding choice of products, methods, and techniques. B. support recurring decisions regarding replacement of equipment, managing cash flow, etc. C. provide a fair and effective basis for identifying inefficient operations. D. provide accurate accounting for inventory, receivables, and other assets. Product costing 6. Product costing system design or selection: A. requires an understanding of the nature of the business B. should provide useful cost information for strategic and operational decision needs C. should be cost effective in design and selection
12. An imputed cost is A. The difference in total costs which results from selecting one choice instead of another. B. A cost that does not entail any cash outlay but which is relevant to the decision-making process. C. A cost that may be shifted to the future with little or no effect on current operations. D. A cost that continues to be incurred even though there is no activity. Cost According to Behavior Semi-variable costs 14. Semi-variable costs A. per unit remain the same regardless of total output B. remain the same within the relevant range of output C. increase in steps as the amount of the cost driver volume increases D. have both fixed and variable components in them Step cost 15. A step cost is A. the same as semi-fixed cost B. the same as mixed cost C. a cost that increases in steps as the amount of cost-driver volume increases D. a and c only. Product Cost vs. Period Cost Period cost 18. Which of the following would NOT be a period cost for a manufacturing firm? A. Selling expenses B. Salary paid to the CEO of the company C. Repairs to the Receptionist's computer D. Utilities in manufacturing plant Direct vs. indirect costs 17. What kind of costs can be conveniently and economically traced to a cost object or pool? A. Indirect Costs. C. Direct Costs. B. Relevant Costs. D. Overhead Costs. 47. Direct product expenses A. are incurred for the benefit of the business as a whole B. cannot be identified readily with a given product
228
C. can be assigned to product only by a process of allocation D. would not be incurred if the product did not exist 9. The distinction between direct and indirect costs depends on whether a cost A. is controllable or non-controllable. B. is variable or fixed. C. can be conveniently and physically traced to a cost object under consideration. D. will increase with changes in levels of activity. 19. Of most relevance in deciding how indirect costs should be assigned to products is the degree of A. Linearity. C. Avoidability. B. Causality. D. Controllability. Comprehensive 13. Almos, Inc. makes ski-boards in Davao. Identify the correct matching of terms. A. Fiberglass is factory overhead B. Plant real estate taxes are a period cost C. Depreciation on delivery trucks is a product cost D. Payroll taxes for workers in the Packaging Dept. are direct labor Traditional Costing Accounting 28. An accounting system that focuses on transactions is A. an activity-based accounting system. C. a traditional accounting system. B. a product life cycle costing system. D. all of the above. 29. Traditionally, managers have focused cost reduction efforts on A. activities. C. departments. B. processes. D. costs. 33. Which of the following is a trait of a traditional cost management system? A. unit-based drivers C. tracing is intensive B. detailed activity information D. focus on managing activities 23. Which of the following is typically regarded as a cost driver in traditional accounting practices? A. number of purchase orders processed C. number of transactions processed B. number of customers served D. number of direct labor hours worked
21. Which of the following is not a trait of a traditional cost management system? A. unit-based drivers C. focus on managing activities B. allocating intensive D. narrow and rigid product costing 24. Which of the following is not typical of traditional costing systems? A. Use of a single predetermined overhead rate. B. Use of direct labor hours or direct labor cost to assign overhead. C. Assumption of correlation between direct labor an incurrence of overhead cost. D. Use of multiple cost drivers to allocate overhead. Overhead allocation 35. Conventional product costing uses which of the following procedures? A. Overhead costs are traced to departments, then costs are traced to products. B. Overhead costs are traced to activities, then costs are traced to products. C. Overhead costs are traced directly to product. D. All overhead costs are expensed as incurred. 36. The overhead rates of the traditional approach to product costing use A. nonunit-based cost drivers C. unit-based cost drivers B. process costing D. job-order costing Effect of Traditional overhead allocation 22. The use of unit-based activity drivers to assign costs tends to A. overcost low-volume products. C. overcost all products. B. overcost high-volume products. D. undercost all products. 30. Traditional overhead allocations result in which of the following situations? A. Overhead costs are assigned as period costs to manufacturing operations. B. High-volume products are assigned too much overhead, and low-volume products are assigned too little overhead. C. Low-volume products are assigned too much, and high-volume products are assigned too little overhead. D. The resulting allocations cannot be used for financial reports. 32. Product costs can be distorted if a unit-based cost driver is used and A. nonunit-based overhead costs are a significant proportion of total overhead B. the consumption ratios differ between unit-based and nonunit-based input categories C. both a and b
229
D. neither a nor b Process Costing 40. Which of the following items is not a characteristic of a process cost system? A. Once production begins, it continues until the finished product emerges B. The products produced are heterogeneous in nature C. The focus is on continually producing homogeneous products D. When the finished product emerges, all units have precisely the same amount of materials, labor, and overhead Actual Costing, Normal costing, & Standard Costing Predetermined overhead rate 39. The formula for computing the predetermined manufacturing overhead rate is estimated annual overhead costs divided by an expected annual operating activity, expressed as A. direct labor cost C. direct labor hours B. machine hours D. any of these 37. The two main advantages of using predetermined factory overhead rates are to provide more accurate unit cost information and to: A. simplify the accounting process B. provide cost information on a timely basis C. insure transmission of correct data D. adjust for variances in data sources 34. The effect of uniform production levels on production cost per unit can be achieved A. by using a factory overhead rate based on different production levels for each year B. by using a factory overhead rate based on selling price C. by closing the factory overhead at the end of the accounting period D. by using a factory overhead rate based on long-run normal production activity level 38. No matter which method is used, underapplied or overapplied overhead usually is adjusted only: A. at the end of a year. B. monthly during the year C. if the difference exceeds P1,000 or one percent of total overhead. D. when the company's profit projections require an adjustment Actual Costing
43. Disadvantages of actual costing include A. actual cost systems cannot provide accurate unit cost information on a timely basis B. actual cost systems produce unit costs that fluctuate from period to period C. estimates must be used when calculating the actual overhead rate D. a and b Normal Costing 42. The principal difficulty with normal costing is that A. the unit cost information is not received on a timely basis B. it can result in fluctuating per-unit overhead costs C. estimated overhead and estimated activity are likely to differ from actual overhead and actual costs, resulting in underapplied or overapplied overhead D. there is no difficulty associated with using normal costing 46. Normal costing and standard costing differ in that A. the two systems can show different overhead budget variances. B. only normal costing can be used with absorption costing. C. the two systems show different volume variances if standard hours do not equal actual hours. D. normal costing is less appropriate for multiproduct firms. Standard Costing 20. The product cost which is determined in a conventional standard cost accounting system is a(an) A. Joint cost. C. Expected cost. B. Fixed cost. D. Direct cost. Plant-wide vs. Department-side Overhead Rates 44. Volume-based plant-wide rates produce inaccurate product cost when: A. a large share of factory overhead cost is not volume-based B. firms produce a diverse mix of product C. large volumes of production occur D. Both a and b are correct. Activity-based Costing 25. An activity that has a direct cause-effect relationship with the resources consumed is a(n) A. cost driver. C. cost pool. B. overhead rate. D. product activity.
230
27. The term cost driver refer to: A. any activity that can be used to predict cost changes. B. the attempt to control expenditures at a reasonable level. C. the person who gathers and transfers cost data to the management accountant. D. any activity that causes costs to be incurred. 26. Each group of overhead costs should be applied based on A. direct labor hours or cost. B. units produced. C. whatever activity drives those specific overhead costs. D. machine time. 31. Which of the following statements is true? A. The traditional approach to costing uses many different cost drivers. B. Costs that are indirect to products are by definition traceable to directly to products. C. Costs that are indirect to products are traceable to some activity. D. All of the above statements are true. 41. Why is it better to use separate overhead rates? A. Some departments are labor-intensive, some are machine-intensive. B. Labor rates vary considerably among departments. C. The resulting overhead rates are all about the same. D. All jobs require about the same percentage of time in all departments. Operating Leverage 45. If company A has a higher degree of operating leverage than company B, then: A. the company A has higher variable expenses. B. the company A's profits are more sensitive to percentage changes in sales. C. the company A is more profitable. D. the company A is less risky.
PROBLEMS: Total manufacturing costs 1 . Direct materials and direct labor costs total P120,000, conversion costs total P100,000, and factory overhead costs total P400 per machine hour. If 150 machine hours were used for Job #201, what is the total manufacturing cost for Job #201? A. 120,000 C. 180,000 B. 160,000 D. 280,000 Overhead Budgeted overhead 2 . Machine hours used to set the predetermined overhead rate were 25,000, actual hours were 24,000, and overhead applied was P60,000. Budgeted overhead for the year was A. P57,600. C. P60,000. B. P59,000. D. P62,500. Overhead per unit 3 . ABC Company had a total overhead of P360,000 and selling and administrative expense of P140,000 for the year. 1,000 units of A and 3,000 units of B were produced. A requires 3 machine hours and B requires one machine hour per unit. What is overhead chargeable per unit of A A. P 60 C. P120 B. P 90 D. P180
4
ABC Company had a total overhead of P360,000 and selling and administration expense of P140,000 for the year. 1,000 units of A and 3,000 units of B were produced. Assuming that 20% of all overhead are batch-related for 1,000 batches, 40% of which was for producing product A, batch-related overhead for product A per unit amounts to A. P20 C. P60 B. P40 D. P80 ABC Company had a total overhead of P360,000 and selling and administration expense of P140,000 for the year. 1,000 units of A and 3,000 units of B were produced. Assuming that 30% of overhead is product related overhead - 20% of which is related to product A, productrelated overhead per unit of A amounts to A. P30 C. P50 B. P40 D. P60
Total overhead variance 8 . Cooke Company uses the equation P450,000 + P1.50 per direct labor hour to budget manufacturing overhead. Cooke has budgeted 150,000 direct labor hours for the year. Actual results were 156,000 direct labor hours and P697,500 total manufacturing overhead. The total overhead variance for the year is A. P4,500 favorable. C. P4,500 unfavorable. B. P18,000 favorable. D. P18,000 unfavorable. Over(under)-applied overhead 9 . If estimated annual factory overhead is P800,000, estimated annual direct labor hours are 400,000, actual June factory overhead is P82,000, and actual June direct labor hours are 38,000, then overhead is: A. P6,000 overapplied C. P1,800 underapplied B. P1,800 overapplied D. P6,000 underapplied Gross profit 10 . BKY Company predicted that factory overhead for 2006 and 2007 would be P60,000 for each year. The predicted and actual activity for 2006 and 2007 were 30,000 and 20,000 direct labor hours, respectively. 2006 2007 Sales in units 25,000 25,000 Selling price per unit P10 P10 Direct materials and direct labor per unit P 5 P 5
231
ABC Company had a total overhead of P360,000 and selling and administration expense of P140,000 for the year. 1,000 units of A and 3,000 units of B were produced. A requires 3 and B requires one machine hours per unit. A requires 6 direct labor hours and B requires 4 direct labor hours per unit. 40% of overhead is related to labor and the balance to machines. Laborrelated overhead per hour amounts to A. P 8 C. P18 B. P12 D. P24 ABC Company had a total overhead of P360,000 and selling and administration expense of P140,000 for the year. 1,000 units of A and 3,000 units of B were produced. A requires 3 and B requires one machine hours per unit. A requires 6 direct labor hours and B requires 4 direct labor hours per unit. 40% of overhead is related to labor and the balance to machines. The overhead per unit of B amounts to A. P 60 C. P156 B. P 68 D. P180
The company assumes that the long-run production level is 20,000 direct labor hours per year. The actual factory overhead cost for the end of 2006 and 2007 was P60,000. Assume that it takes one direct labor hour to make one finished unit. When the annual estimated factory overhead rate is used, the gross profits for 2006 and 2007, respectively, are A. P 75,000 and P 75,000 C. P125,000 and P125,000 B. P 75,000 and P 55,000 D. P 75,000 and P 50,000 Process costing Work in process 11 . Britney Company has unit costs of P10 for materials and P30 for conversion costs. If there are 2,500 units in ending work in process, 40% complete as to conversion costs, and fully complete as to materials cost, the total cost assignable to the ending work in process inventory is A. P 45,000 C. P 75,000 B. P 55,000 D. P100,000 Overhead component 12 . In the Star Company, the predetermined overhead rate is 80% of direct labor cost. During the month, P210,000 of factory labor costs are incurred, of which P180,000 is direct labor and P30,000 is indirect labor. Actual overhead incurred was P200,000. The amount of overhead debited to Work in Process Inventory should be A. P120,000 C. P168,000 B. P144,000 D. P160,000 Equivalent unit of production 13 . The Assembling Departments output during the period consists of 20,000 units completed and transferred out, and 5,000 units in ending work in process 60% complete as to materials and conversion costs. Beginning inventory is 1,000 units, 40% complete as to materials and conversion costs. The equivalent units of production are A. 22,600 C. 24,000 B. 23,000 D. 25,000
14
. Dodge Company has a mixing department and a refining department. Its process-costing system in the mixing department has two direct materials cost categories (material J and material P) and one conversion costs pool. The company uses First-in, First out cost flow method. The following data pertain to the mixing department for November 2006 Units Work in process, November 1: 50 percent completed 15,000 Work in process, November 30, 70 percent completed 25,000 Units started 60,000 Completed and transferred 50,000 Costs Work-in-process, November 1 P218,000 Material J 720,000 Material P 750,000 Conversion Costs 300,000 Material J is introduced at the start of operations in the Mixing department, and Material P is added when the product is three-fourths completed in the mixing department. Conversion costs are added uniformly during the process. The respective equivalent units for Material J and Material P in the mixing department for November 2006, are A. Both 50,000 units C. 75,000 units and 60,000 units B. 60,000 units and 50,000 units D. 60,000 units and 75,000 units . The cost of goods completed and transferred out to the Refining department was A. P1,930,750 C. P1,600,500 B. P1,350,000 D. P1,550,500 . The Amor Companys accounting records reflected the following data for April 2003. The company accounts its production using First-in, First-out cost flow method: Work in process, March 31,2003, 60% completed as to materials and conversion costs ? units Work in process, April 30, 2003, 30% completed as to materials and conversion costs 24,000 units Equivalent units of production for April 2003 64,000 Units started and completed in April 50,000
16
17
. The Amor Company has 2,000 units in beginning work in process, 20% complete as to conversion costs, 23,000 units transferred out to finished goods, and 3,000 units in ending work in process one-third complete as to conversion costs. The beginning and ending inventory is fully complete as to materials costs. Equivalent units for materials and conversion costs are
232
How many units were in the beginning work-in-process? A. 6,800 C. 17,000 B. 11,333 D. 24,000
18
. Had the company used the weighted-average method of accounting for its production, the equivalent units should be A. 74,200 C. 81,000 B. 57,200 D. 53,800
21
Started during the period Material Alpha Material Beta Direct labor cost Factory overhead Transferred to finished goods Work in process (95% complete), April 30
Units to be accounted for 19 . In the Newman Company, there are zero units in beginning work in process, 7,000 units started into production, and 500 units in ending work in process 20% completed. The physical units to be accounted for are A. 7,000 C. 7,600 B. 7,360 D. 7,340 Cost of Finished Goods Transferred 20 . For the month of May, the Production Control Department of La Mesa, Inc. reported the following production data for Finishing Department (second department): Transferred-in from Assembly Department 75,000 Transferred-out to Packaging Department 59,250 In-process end of May (with 1/3 labor and factory overhead) 15,750 All materials were put into process in Assembly Department. The Cost Accounting Department collected these figures for Finishing Department. Unit cost for unit transferred-in from Assembly Department P 2.70 Labor cost in Finishing Department 41,280.00 Applied factory overhead 112.5% of labor cost How much was the cost of Finished goods transferred out to the Packaging Department? A, P240,555 C. P260,580 B. P 80,580 D. P159,975 Comprehensive Use the following data to answer question Nos. 18 through 20. Mergy Company uses process costing in accounting for its production department, which uses two raw materials. Material Alpha is placed at the beginning of the process. Inspection is at the 85% completion stage. Material Bravo is then added to the good units. Normal spoilage units amount to 5% of good output. The company records contain the following information for April:
233
. How much were Material cost per equivalent unit for Alpha and Beta, respectively? A. P1.40; P1.36 C. P1.34; P1.06 B. P1.40; P1.06 D. P1.34; P1.25 . The equivalent units of production for Material Alpha and Beta are Alpha Beta A. 18,000 14,000 B. 18,000 18,000 C. 20,000 18,000 D. 20,000 14,000 . The number of normal and abnormal lost units are: Normal Abnormal A. 700 1,400 B. 1,400 700 C. 900 1,100 D. 1,100 900
22
23
Material cost Unit material cost 24 . Catridge Company has no beginning work in process; 9,000 units are transferred out and 3,000 units in ending work in process are one-third finished as to conversion costs and fully complete as to materials cost. If total materials cost is P60,000, the unit materials cost is A. P5.00 C. P5.45 B. P6.00 D. P5.35 Lost units 25 . Lapid Company uses process costing. All materials are added at the beginning of the process. The product is inspected when it is 90 percent converted, and spoilage is identified only at that point. Normal spoilage is expected to be 5% of good output.
The following are extracted from the production records of Lapid Company for May 2003: Units put into process 21,000 Units transferred to finished goods 14,000 In-process, May 31, 75% complete 6,000 How many are considered abnormal lost units? A. Zero C. 15 B. 300 D. 850 Statement of Cost of Goods Manufactured & Sold Use the following information that pertains to beta manufacturing company to answer questions 21 through 23: Beginning direct materials inventory Beginning WIP inventory Beginning finished goods inventory Ending direct materials inventory Ending WIP inventory Ending finished goods inventory Purchases Direct labor Factory overhead
26
. What is the amount of direct materials used during the period? A. P140,000 C. P 60,000 B. P130,000 D. P150,000 . What is the amount of cost of goods manufactured during the period? A. P430,000 C. P470,000 B. P420,000 D. P510,000 . What is the amount of cost of goods sold during the period? A. P430,000 C. P470,000 B. P420,000 D. P510,000
27
28
234
Answer: C Direct materials and direct labor Factory overhead P400 x 150 Total manufacturing cost Answer: D Overhead rate per hour Budgeted overhead (P60,000 24,000) (25,000 x P2.50)
P120,000 60,000 P180,000 P2.50 P62,500 6,000 P 60 P180 P144,000 18,000 P 8 P216,000 6,000 P36 P32 36 P68
Answer: D Total number of hours: (1,000 x 3) + (3,000 x 1) Overhead cost per hour (P360,000 6,000) Overhead charged per unit of product A: 3 hrs. x P60 Answer: A Labor-related overhead: (P360,000 x 0.40) Total number of labor hours: (1,000 x 6) + (3,000 x 4) Labor-related overhead per DLH: (P144,000 18,000) Answer: B Machine-related overhead: (P360,000 x 0.6) Total number of machine hours (1,000 x 3) + 3,000 Machine-related OH per MH: (P216,000 6,000) Overhead applied per unit of Product B: Labor-related (4 hours x P8) Machine-related (1 x P36) Overhead per unit
The overhead is broken down into two volume-based cost pools. This is a more modified example of traditional costing
6
Answer: B Batch related costs: (360,000 + 140,000) 20% P100,000 Batch related costs, Product A: 100,000 40% 40,000 Batch-related overhead per unit of Product A: 40,000 / 1,000 P 40 In ABC costing, there is no need to make a distinction between manufacturing and non-manufacturing costs in computing the relevant product costs Answer: A Product-related overhead cost (360,000 + 140,000) 30% Product-related overhead cost, Product A: 150,000 20% Product-related overhead cost per unit, Product A: 30,000 / 1,000 P 30 . Answer: A Variable overhead Predetermined fixed overhead (P450,000 150,000) Total overhead rate Actual overhead Applied overhead (156,000 hours x P4.50) Total overhead variance, favorable Answer: D P150,000 P 30,000
Applied overhead Actual overhead Underapplied overhead Overhead rate per direct labor hour
10
38,000 x P2
(P800,000 400,000)
Answer: B Gross Profit: 2006: (25,000 x 10) - 175,000 = P75,000 2007: (25,000 x 10) - 195,000 = P55,000 Overhead application rates: 2006: 60,000/30,000 = P2.00 2007: 60,000/20,000 = P3.00 Unit Costs: 2006: 5 + 2 = P7.00 2007: 5 + 3 = P8.00
Costs of goods sold: 2006: 25,000 x P7 P175,000 2007: (5,000 x P7) + (20,000 x P8) P195,000 Note: In 2007 the company has a beginning inventory of 5,000 units at unit cost of P7.
11
Answer: B Materials cost (2,500 x P10) Conversion cost (2,500 x 0.4 x P30) Total costs of Work in Process
12
Answer: B The amount of overhead applied to production should be 80 percent of direct labor cost (P180,000 x 0.80) = P144,000 Answer: B Completed units Work in process, End (5,000 x 0.6) Total equivalent units, average Answer: B Units completed and transferred out Work in Process, End 20,000 3,000 23,000 23,000 3,000
13
14
MaterialsConversion Costs% of CompletionEUP% of CompletionEUPCompleted units10023,000100.0023,000WIP - End100 3,00033.33 1,000Weighted-Average EUP26,00024,000 15 . Answer: B Computation of equivalent units Material JMaterial PWork-in-process, Nov. 1-15,000Units started and completed35,00035,000Work-in-process, Nov. 3025,000-EUP60,00050,000 16 . Answer: C Work in process-beginning Cost, Nov. 1P218,000Cost, November Material P (15,000 x P5)225,000 Conversion 7,500 x P5 37,500262, 500P 480,500Started, completed 35,000 P32 1,120,000Cost of goods transferred out
17
18
P1.600,500Unit Costs Material J720,000/60,000P12 Material P750,000/50,00015 Conversion costs300,000/60,0005 TotalP32 . Answer: C Equivalent units for April64,000Less: EU started and completed during: April50,000 Work-in-process, end (24,000 x 3)7,20057,200Equivalent units - work-in-process end Mar 316,800Number of units in process as of March 31 6,800 4017,000 . Answer: A Equivalent units FIFO 64,000 Add equivalent units in March 31 (17,000 x .6) 10,200 Weighted Average EUP 74,200 . Answer: A The number of units to be accounted should be the sum of the units in beginning work in process and the number of units that have been started during the period . Answer: A EUP: Transferred out to Packaging Dept. In process, end 15,750 x 1/3 Total Unit Cost: Transferred in Labor and overhead 87,720/64,500 Total Cost of finished goods transferred out 59,250 x 4.06 Transferred to F.G.14,00014,000 0 Total20,00018,000Unit cost
19
20
59,250 5,250 64,500 2.70 1.36 4.06 P240,555 End Process 4,000 4,000 Normal lost units
21
Answer: D Equivalent units AlphaBeta 9000 Abnormal lost unit 1,100 Alpha P26,800 20,000 = P1.34 Beta P22,500 18,000 = P1.25
22
23
. Answer: C Equivalent unitsAlphaBetaTransferred to F.G.14,00014,000End Process 4,000 4,000Normal lost units 900Abnormal lost unit 1,100 ______Total20,00018,000 . Answer: C Total lost units (20,000 18,000) 2,000 Total lost units 5% x 18,000 900 Abnormal lost units 1,100 . Answer: A Completed and transferred out Units in work-in-process, End (3,000 x 100%) Equivalents units of production - Materials Materials cost per EUP (P60,000 12,000) Answer: B Total lost units (21,000 20,000) Less normal lost units 5% of 14,000 Abnormal lost unit Answer: D 9,000 3,000 12,000 P5.00 1,000 700 300
24
25
26
Beginning materials inventory Add Materials Purchased Total cost of materials available for use Deduct Materials inventory, End Cost of materials used
27
P 20,000 140,000 160,000 10,000 P150,000 P150,000 160,000 200,000 510,000 20,000 530,000 100,000 P430,000 P430,000 40,000 470,000 50,000 P420,000
Answer: A Direct materials used Direct labor Overhead Total manufacturing costs Add Work in process, beginning Total costs placed in process Deduct Work in process, end Cost of goods manufactured Answer: B Cost of goods manufactured Add finished goods inventory, beginning Total cost of goods available for sale Deduct finished goods inventory, end Cost of goods sold
28