Flyback Plasma Speaker With 555
Flyback Plasma Speaker With 555
http://www.instructables.com/id/Flyback-plasma-speaker-with-555/
http://www.instructables.com/id/Flyback-plasma-speaker-with-555/
1 ADJ. POS. REG. 1 2n3055 1 .001uf cap 1 .03uf cap 1 Gi2404 diode othere parts needed 2 9v batteries 1 16v 3 amp DC power supply 1 FLYBACK TRANSFORMER 1 audio signal you may need some type of amplifier if you use a weak signal like a cell phone or weak mp3(im using an old raidoshack amp)
Step 2: Schematic
note the batts ground and the power supply ground are hooked together
Image Notes 1. batt ground and PS ground 2. headphone jack 3. voltage reg.
http://www.instructables.com/id/Flyback-plasma-speaker-with-555/
Step 3: Heatsinking
mount 2n3055 and gi2404 diode to a large heat sink
http://www.instructables.com/id/Flyback-plasma-speaker-with-555/
Related Instructables
http://www.instructables.com/id/Flyback-plasma-speaker-with-555/