Design For Sustainability - A Practical Approach
Design For Sustainability - A Practical Approach
a practical approach
for Developing Economies
Design for Sustainability
a practical approach
for Developing Economies
On behalf of the
Federal Ministry for Economic
Cooperation and Development, Germany
Acknowledgements
Supervision, technical editing and support
Ms. Garrette Clark, UNEP DTIE, France
Authors
Dr. M.R.M. Crul and Mr. J.C. Diehl
Delft University of Technology,The Netherlands
Faculty of Industrial Design Engineering
Photography
Mrs. Carmen van der Vecht,The Netherlands and SUSDESIGN Portugal
Financial support
InWEnt - Capacity Building International, Germany
Foreword
Monique Barbut
Director
UNEP DTIE
D4S Graphic Design Concept
The D4S graphic design of this publication is based on the sustainability concept and its considera-
tion of the three elements of PEOPLE, PROFIT AND PLANET. The graphic design is comprised of
3 subjects and 3 colours to illustrate these elements:
PEOPLE are illustrated by the expressions of Human beings from different cultures and races.
PLANET is represented by different natural elements of the planet such as water, rocks, trees, sand
and plants.
PROFIT is illustrated by views of the building environment taken from examples of highly deve-
loped sites from throughout the world.
Lgo Sto Antoninho, 3
1200 406 Lisboa The graphic design was developed by SUSDESIGN, an entity devoted to the promotion of Design
Portugal for Sustainability and is illustrated with photographs of Carmen van der Vecht and SUSDESIGN.
Tel l Fax: + 351 213 422 200
[email protected]
www.susdesign.org
Photos by:
Carmen van der Vecht
[email protected]
www.streetarts.info
and SUSDESIGN
Part I
What is D4S
and why do it?
1> Introduction
1.1 _ The relevance of Design for
Sustainability (D4S)............................................ 15
1.2 _ To whom is this
publication addressed?....................................... 16
1.3 _ How is the
publication organized?........................................ 17
B> Developing economies_ Many product innovation ideas would never be imple-
> Enhance number of skilled workers mented if they were required to meet all the above
> Reduce income inequity criteria. Therefore, the goals and targeted elements of a
> Improve working conditions D4S project need to be clearly defined.
> Abolish child labour A carefully prepared D4S project can contribute pow-
> Reduce illiteracy erfully to a company’s future. A business that wants to
> Basic health services become and/or remain competitive will need to address
> Clean drinking water sustainability issues. Large companies, as well as custo-
> Reduce population growth mers, governments and international organisations, are
> Improve status of women increasingly building sustainability requirements into their
22 > Abolish large scale dislocation of people supply chains. Investment in a sustainable product innova-
tion strategy can have immediate and longterm benefits.
During the development of a new product, or the
redesign of an existing one, the product development
team is confronted with a variety of design criteria
like quality, ergonomics, safety, aesthetics etc. With
the D4S approach, environmental and social criteria
are integrated into the product development process
as well, minimizing the impacts of the product through-
out its life cycle.
26
Table 2 ___ Internal and external drivers for D4S.
27
003 Product InnovatIOn
D4S is based on a combination of product innovation and sustainability.
Understanding the underlying concept of product innovation can help in imple-
menting D4S projects. This chapter discusses different (product) innovation
approaches and explains the product development process. These insights can
assist during the Needs Assessment (Chapter 4) to identify the appropriate
innovation level and D4S approach for the participating companies in demon-
stration projects.
3.1 Innovation
Product innovation is essential for a country’s econo- > Business and management innovation involves
mic growth and for the competitive position of indus- developing new reward systems, organizational struc-
try. Companies operate in a rapidly changing world in tures, ways of handling responsibilities and human
which customers’ needs and wants are not fixed and resources etc. that positively affects product sales.
where they face increasing competition due to open Within D4S the focus is on product and market
markets and globalization. Companies that effectively innovation. Process innovation is often more linked to
integrate innovation in the product development cleaner production and management innovation to envi-
process can gain significant competitive advantage. ronmental management systems like ISO 14000.
Innovation is a broad concept that is used in many
different contexts. As a result, there are many defini-
tions of innovation. One useful definition is: “the com- 3.2 Innovation levels
mercial or industrial application of something new– a new
product, process or method of production; a new market or Innovation happens in different degrees and can be cate-
source of supply; a new form of commercial, business or gorized into three levels: incremental, radical and funda-
financial organization”. mental (see Figure 6). Each category is progressively
Most definitions of innovation emphasize ‘newness’ more significant and more far-reaching.
and ‘successfulness’. There are distinctions made 1> Incremental innovation_ Entails step-by-step
between product versus process innovation and some- improvements of existing products and tends to
times amongst market, business and management innova- strengthen market positions of established companies
tion. For example: in the industry.
> Product innovation is the introduction of new 2> Radical innovation_ Drastically changes existing
products that have characteristics and/or use applica- products or processes. The risks and required invest-
tions that differ from existing products on the market. ments in radical innovation are usually considerably
> Process innovation is the introduction of a new greater than those needed for incremental innovation
method of production, that has not previously been used but they offer more opportunity for new entrants to
and/or a new way of handling a commodity commercial- the market.
ly to make production more efficient or to be able to 3> Fundamental innovation_ Depends on new scien-
produce new or improved products. tific knowledge and opens up new industries, causing a pa-
> Market innovation involves entering new markets, radigm shift. In the early stage of fundamental innovation,
new ways of serving customers, and/or market expansion. the contributions of science and technology are important.
The majority of innovation efforts take place in com- design improvement are known as the ‘bread and but-
panies that work from the incremental or radical inno- ter’ of new product development for many firms. Many
vation perspective. There is a wide range of innovation firms do not even attempt to explore radical innovation
possibilities between these two extremes. Funda- for a variety of reasons having to do with their size and
mental innovation often takes place only in large multi- resources, the nature of the industry, the level of re-
national companies, company clusters or (inter)national search and development necessary, or the amount of
research programs because of the large human and ca- risk involved. Even firms that successfully introduce ra-
pital investment needed. For D4S in developing econo- dical innovation may not do so very often. Incremental
mies it is less relevant. innovation projects, due to the low level of involved risk
Successful incremental or radical innovation requires usually follow a structured and predictable process.
different kinds of thinking, ways of working, and risk ta-
king. To get more insight and a better understanding of 3.2.2 Radical innovation
both types of innovation, they are discussed in more
detail below. Radical innovation involves the development of key new
design elements such as change in a product component
combined with a new architecture for linking components.
The result is a distinctively new product that is markedly
different from the company’s existing product line.
A high level of uncertainty is associated with radical
innovation projects, especially at early stages. Due to
high levels of uncertainty, the process cannot be
described as an orderly structured process. Radical
innovations are confronted with uncertainties on different
levels. To be successful, uncertainty must be reduced in
the following dimensions:
Figure 6 ___ Different degrees of innovation.
> Technical uncertainty_ are issues related to the
completeness and correctness of the underlying scien-
tific knowledge and the technical specification.
3.2.1 Incremental innovation > Market uncertainty_ are issues related to cus-
tomer needs and wants.
As the name suggests, this type of innovation makes
small changes at one given time and is sometimes refer-
red to as continuous improvement. A simple product
may be improved (in terms of better performance or
lower costs) through the use of higher performance
components or materials. A complex product that con-
sists of integrated technical subsystems can be
improved by partial changes at one level of a sub-sys-
tem. Incremental innovations do not involve major
investments or risk. User experience and feedback is
important and may predominate as a source for innova-
tion ideas. As an example, customer wants can be iden-
tified and added as features to the existing product.
30 Incremental innovation and the redesign of existing
products are economically and commercially as impor-
tant as radical innovations. Incremental innovation and Table 3 ___ Comparison of incremental and radical
innovations characteristics.
> Organisational uncertainty_ refers to organiza- opportunities into a new product and on to the market”.
tional resistance that stems from conflict between the It includes strategy, organization, concept generation,
mainstream organization and the radical innovation product and marketing plan creation and evaluation, and
team. the commercialization of a new product.
> Resource uncertainty_ includes project disconti- The product development process is a disciplined
nuities that influence the project’s funding, staffing, and and defined set of tasks, steps, and phases that describe
management requirements. Radical innovations need a how a company repetitively converts ideas into salable
number of enabling factors such as a high level of tech- products and/or services. The product development
nological capability, strong R&D and a pool of multidis- process itself can be split up into three phases: policy
ciplinary skills whereas the incremental innovation formulation, idea finding and strict development (see
adoption process needs less. Figure 7).
Every step has two different kinds of activities (see
3.2.3 Product innovation Figure 8): first a divergent activity, followed by a conver-
gent activity. These approaches identify relevant infor-
The product innovation process involves a series of mation in a creative way and then evaluate it. Divergent
sub-processes dominated by the product development methods search for ideas and include searching for
process followed by the realization (see Figure 7). information, to explore the problem, to redefine it, to
generate ideas and to combine concepts. Convergent
Product Innovation = Product Development + Realization
methods impose value judgments and include methods
In the following paragraphs a general step-by-step prod- to make sense of information, to prioritize items, to
uct development process will be outlined. compare solutions, to assess ideas and to reject or
select concepts. The product development process is
often presented as a linear process. However, in prac-
3.3 Product tice it is often characterized as a linear process with
development process iterative cycles, meaning that design teams often go
back to earlier stages and decisions in the product
Product development can be defined as “the process development process to re-evaluate previous decisions
that transforms technical ideas or market needs and that have been made.
31
33
36
Figure 16 ___ Search fields that combine the iden-
tified strengths and opportunities of a SWOT
matrix (Buijs and Valkenburg, 2000).
Next, the internal strengths are put in the cells 1 to 8 3.5.3 Concept development
on the horizontal axis. By combining the internal stren-
gths with the external opportunities new product ideas The concept development builds upon the creative
can be generated. ideas generated, merging them and developing more
As a result, the company might come up with several fleshed out concrete options for evaluation. A concept
promising search fields. To facilitate the evaluation and is a clearly written and possibly visual description of the
selection of the best search field, it is useful to work them new product idea, including primary features, consumer
out in more detail. After selecting the most promising benefits, and an outline of technology needed. Concept
search fields, product ideas can be generated within them. generation can involve:
> Definition of target market and customers;
3.5.2 Creativity sessions > Identification of the competition and formulation of a
competitive strategy;
Creativity sessions enable the production of a lot of > Development of preliminary technical product and
ideas for new products. All ideas - no matter how ludi- testing scheduling;
crous or extreme they may sound - should be gathered. > Estimation of required resources for product deve-
Depending upon the search fields, the product develop- lopment; and
ment team can apply different kinds of creativity tech- > Creation of a preliminary business plan.
niques to generate product ideas. After the selection of the best concept, it is worked
Chapter 9 presents different creative techniques in out in detail.
more detail with examples.
37
38
Figure 18 ___ Parallel activities: product development, production development and marketing planning.
Research shows that SMEs in developing economies > A tendency not to design solutions that have no
have different attitudes towards product design com- precedence in the market place (international and local);
pared to SMEs in developed economies. Some of the > Lack of tools and experience to compare and eva-
observed differences are: luate alternative approaches to design problems; and a
> A tendency to design incremental improvements > Difficulty in developing clear project briefs.
for existing products; These aspects highlight the need to build capacity in
> Concern with product appearance over product product development. The next chapters provide step-
function; -by-step instructions on how to identify and carry out 2
> An approach to design based on a tradition of tech- different kinds of D4S efforts.
nology import rather than a tradition of invention or
innovation:
Figure 19 ___ Development of South Korea from cost leadership to design leadership (Chung, 2004).
39
Planet
Part II
how to do D4S
in practice
004
D4S Needs Assessment
The D4S Needs Assessment is a step-by-step approach to prioritize industry
sectors to effectively target D4S demonstration projects. Successful D4S pro-
jects require good insight and understanding of the characteristics and needs
of the national economy and local industries. A D4S project action plan can
be divided into 4 stages: identifying the characteristics and needs of the pro-
ject, the national economy, the industry sectors and specific companies.
An understanding of the national economic situation Level 2 > The national economic situation
will: contribute to the objectives of a D4S project; serve (Macro)
as a starting point to identify suitable companies for > What is the national income?
demonstration projects; and assist in the development > What is the human development index?
of appropriate D4S training materials. D4S in-company > How is the competitive position of the country and
(in-house) demonstration projects should be relevant its industries?
to the overall D4S project expectations. > How significant are their exports and what is their
composition?
> What is the contribution of the agricultural, industrial
and service sectors to the national economy?
> At which stage is the industrial development of the
country?
> What is the role and impact of SMEs and large indus-
tries in the national economy?
> What is the role and impact of the informal sector in
the national economy?
> What are the sustainability issues related to produc-
Figure 20 ___ Characteristics and needs of the nation- tion and consumption?
al economy, sectors and companies.
_ Selection of relevant sectors and company size
Following the 4 sets of questions will result in a D4S Level 3 > Sector level (Meso)
project action plan which targets industry sectors and > How does the sector perform?
carries out a needs assessment for D4S training ma- > What are current (product) innovation strategies of
terials (see Figure 20). The four levels and underlying the sector?
basic considerations are: > What is the absorptive capacity for innovation of the
companies within the sector?
Level 1 > The project > What are the relevant sustainability issues within the
> What are the objectives of the project? sector?
> Who are the main beneficiaries? > What are (potential) drivers for product innovation
> What is the goal of the knowledge transfer for each and D4S in the sector?
of these target groups? > Who are the relevant stakeholders within the sector?
_ Clear objectives and preliminary target groups _ Selection of companies
Level 4 > Company level (Micro)
> What are current (product) innovation strategies for
the company?
> What is the absorptive capacity for innovation of the
company?
> Are there local R&D institutions that can support the
product innovation process?
> Are there local (industrial) design schools that can be
involved?
_ Development of appropriate training materials
(content as well as approach)
United Nations Development Program (UNDP) for different purposes.They use similar though not con-
‘Human Development Report’ sistent terminology. These indicators can be helpful in
> http://hdr.undp.org/statistics/data/ selecting industry sectors and companies and illustrate
the current ways in which data is collected and monitored.
The World Bank ‘Key Development and Statis-
tics Data’ 4.2.2 Gross Domestic Product
> http://www.worldbank.org/data/countrydata/country (GDP)
data.html
Economic and other development indicators of a country
The World Bank ‘Knowledge Assessment can provide useful insights to the product innovation
Method’ level and business climate in a country. The develop-
> http://info.worldbank.org/etools/kam2005/home.asp ment level of a country is often based on a set of criteria
that include income, quality of life and economic vulne-
CIA World Fact Book rability of the country.
> http://www.cia.gov/cia/publications/factbook/ Income is often expressed in Gross Domestic Pro-
duct (GDP) per capita. Quality of life is expressed by
World Economic Forum (WEF) ‘Global the Human Development Index (HDI) of the United
Competitiveness Report’ Nations Development Program (UNDP). Many other
> http://www.weforum.org/gcr characteristics can be found within these indicators
such as the education level and industry composition.
World Resource Institute (WRI) ‘Earth Trends’ National income can be indicated in several ways, but
> http://earthtrends.wri.org/ is usually expressed in GDP and GDP Purchasing Power
Parity (PPP) per capita. GDP stands for the total market
United Nations International Children’s value of all goods and services that are produced with-
Emergency Fund (UNICEF) ‘The State of the in a country during a given period and includes the pro-
World’s Children’ fits from all foreign-owned corporations and foreign
> http://www.unicef.org/infobycountry/index.html individuals working in that country. The PPP is a theo-
retical exchange rate derived from the perceived parity
> Collect the economic and social data for the of purchasing power of a currency in relation to another
countries. > Worksheet N2 currency. In contrast to the “real” exchange rate used
for currencies in the official market (as opposed to the
In the next steps the economic and social data will black market), the PPP exchange rate is calculated from 47
be reviewed and analyzed in more detail. As can be seen, the relative value of a currency based on the amount of
the indicators are collected by a variety of organizations a “basket” of goods the currency will buy. Typically, the
prices of many goods will be considered, and weighted The development stage of a country often relates to
according to their importance in the economy.The PPP the economic development, but it is also closely associa-
exchange rate is perceived to be a better comparison of ted to the social development in terms of education,
standard of living. healthcare, and life expectancy. Based upon the develop-
The United Nations Development Program (UNDP) ment stage countries can be classified into the following
classifies countries into High, Middle and Low income. four groups:
Below, Figure 22 illustrates the average GDP and GDP > LDC: Least Developed Countries_ The 50 poorest
PPP for the three country national income groups. As can countries in the world (most in Sub-Sahara Africa) as
be seen, the differences between the High income and defined by the United Nations.
the Middle/Low income countries are great. > DC: Developing Countries_
> NIC: Newly Industrialising Countries_ Countries
switching from an agricultural to an industrial-based eco-
nomy, especially the manufacturing sector. Current exam-
ples are Turkey,Thailand, Malaysia, Mexico and South Africa.
> IC: Industrialised or Developed Countries_ Most
countries in Europe, North America, Japan and Australia.
56
A 10 step approach
The D4S Redesign approach has 10 steps. Each step outside the company (knowledge institutes/universities,
reflects a part of the product development process as dedicated consultancies, sector organizations or part-
illustrated in the figure below. In the following sections, ners from local or regional clusters) can be asked to
each step is explained, and a reference is made to the join the project team or monitoring committee. See
connected worksheets that can be found on the accom- Chapter 4 Needs Assessment for how to identify rele-
panying CD-ROM (see also Figure 31). vant stakeholders.
4> Fill in the D4S Impact Matrix Material row_ This row is intended for notes on envi-
ronmental problems concerning the input and output of
The next step is to discuss and fill in the resultant D4S materials.This row should include information and data
Impact Matrix. Often existing knowledge within the about the use of materials and components that are:
team is sufficient.The idea is to sit together and to dis- non-renewable, being depleted, creating emissions du-
cuss the D4S aspects of the different steps of the life ring production (such as copper, lead and zinc), incom-
cycle. In some cases, it might be useful to invite a D4S patible and/or inefficiently used in all stages of the pro-
expert. For example, discussions of the environmental duct life cycle. Some relevant questions for the team
aspects might benefit from an energy expert joining the include:
session. > What kind and quantity of materials are used?
There are different ways to fill in the matrix. The > Which type and quantity of surface treatment is used?
team can decide to it more qualitatively (for example > Are they renewable or non-renewable?
‘plastic (fossil fuels)’) or more quantitatively (for exam- > Are materials incompatible (for recycling)?
ple ‘gasoline 200 liter’). The challenge is not to write > Other?
down all the materials and processes, but to record
those that are relevant. Energy consumption row_ This row lists energy 65
Some suggestions for filling in the D4S Impact consumption during all stages of the life cycle. It could
Matrix: include energy consumption for the production of the
product itself, transport, operating and use or maintenance focus for developing improvement options.
and recovery. Material inputs with high energy content > Highlight those cells or activities in the D4S
are listed in the first cells of the column. Exhaust gasses Impact Matrix that have high sustainability
produced as a result of energy uses are included in this impacts. > Worksheet R5
row. Some relevant questions for the team include:
> How much energy is consumed during manufacture? During the development of the matrix, improvement
> What feedstock is used (coal, gas, oil etc.)? options may become obvious.
> How is the product transported, how far and by what
mode? > Collect obvious improvement options to use in
> Have energy intensive materials like primary alumi- the later phase of idea generation. > Worksheet R7
num been used?
> Other?
Step 6: Developing a D4S
Human resource management (HRM) row_ This strategy and a D4S
row lists the activities needed to improve the HRM at design brief
the company. Some relevant issues include:
> How safe and clean is the work place? The insights gained in the analysis phase (Steps 2, 4, and
> Is healthcare being provided for employees and their 5) are the starting point for Step 6. The D4S strategy
families? wheel illustrates 7 general D4S strategies that cover a
> Are there policies to address issues like freedom of wide range of improvement directions and parallel the
association? stages of the product life cycle:
> Are there corporate policies to abolish child labour? 1> Selection of low-impact materials;
> Are there corporate policies to abolish discrimina- 2> Reduction of materials usage;
tion? 3> Optimization of production techniques;
> Are there training and development opportunities in 4> Optimization of distribution system;
place for employees? 5> Reduction of impact during use;
> Other? 6> Optimization of initial lifetime; and
The same applies for the other sustainability issues 7> Optimization of end-of-life system.
in the first column of the D4S Impact Matrix. Next to the 7 strategies described above, figure 35
also shows the ‘0’ strategy of complete new product
Example_ design – an important strategy in light of innovation
In the project of Talleres
REA (Guatemala) a generic
D4S Impact Matrix was
filled in to show the various
impacts. See Chapter 7.2.
Example_
In the project at
Talleres REA
(Guatemala) dif-
ferent strategies
were chosen, two
were developed
based on the
impact matrix and
two were based on the drivers. See Chapter 7.2.
> Work out the D4S design brief. > Worksheet R6 During the analysis of the D4S Impact Matrix and the
D4S drivers, obvious improvement options have been
collected on Worksheet R7.
Step 7: Idea generation
and selection Example_
Recycled plastics
This step generates ideas for improving the sustainabil- were used to cre-
ity of the product. Once generated, the team prioritises ate a new product
them and then generates, selects and details a new (strategy 1) by
product concept. (See Figure 37.) Ragbag (India). See
Chapter 7.5.
For each of the 7 strategies, ‘rules of thumb’ have been > Which criteria should be used to select and pri-
formulated.The overview of these rules can be found in oritise improvement options? > Worksheet R7
Chapter 8.
The improvement options can be evaluated and pro-
> Check the D4S rules of thumb to see if they vided with ‘values’ against each criteria.
stimulate other improvement options.
> Worksheet R7
Selection of promising ideas A final choice can usually be made only after the
After generating a lot of ideas, it is useful to cluster ideas have been fleshed out in greater detail in what is
them according to the 7 D4S strategies. known as a ‘product concept’.
Step 1_ What are the objectives of the > To know how the product scores in comparison to local
D4S Benchmark? competitors;
> To get inspiration for environmental improvements;
There are many reasons to initiate a D4S Benchmark. > To know where the product stands in relation to specific
In the beginning it is essential to discuss the project (upcoming) legislation like packaging or take-back obliga-
goals objectives with the team. What will be analysed? tions. What can be derived from competitors in the
What should be achieved? These questions will have an field?
impact on the project design and assist in identifying the > To monitor improvements over time; and there may be
products to be studied and the parameters used to > Other reasons important to the company.
make comparisons.
Possible objectives of a D4S Benchmark project > Specify the product to be benchmarked and
76 could include: define the main objectives for carrying out the
> To learn from worldwide competition in order to enter project. > Worksheet B1
an international market;
> Determine the appropriate type of D4S > Based on objectives, choose the product
Benchmark for the company. Light version ver- brands that will be compared in the D4S
sus extended version - information versus phy- Benchmark exercise. > Worksheet B2
sical version > Worksheet B1
The next step is to identify the most appropriate
Step 2_ How to select products for the products. It is useful to use identification and selection
D4S Benchmark? criteria that are in line with the company’s own pro-
duct.The following criteria can help:
The second step of the benchmark procedure is to > Functionality_ Describe the major and specific fea-
select the products to be used. They can be selected tures of the product. Make sure that the benchmark
from competitors at the international, national or local product does not differ too much from the company’s
level. Sometimes much can be learned from the worst product. If the products are similar in functionality, the
performing products in the sector. results are more appropriate to compare.
1> Identify the leading products in the sector (local, > Manufacturing year_ Verify that the products
regional or international); come from the same product generation. Have they
2> Select products in the same specific market (target been developed and launched into the market in the sa-
group, price/quality etc.); and me period? It does not make sense to compare the
3> Identify products that illustrate ‘best practice’ in the newest model with an old model of a competitor.
field. > Retail price_ Check if the products have similar
A more structured approach could involve establi- retail prices.
shing selection criteria. Be sure to take into account the > Availability_ Make sure that there is not too much
objectives determined in Step 1. For example, if the difference in commercial availability. Ideally all products
objective is: should be equally accessible to customers.
> To learn from competition worldwide make sure to The project products will be identified at the end of
include 2-3 products from global competitors, prefe- Step 2.
rably from top multinational brands.
> To know how the product scores in comparison to local > Choose the products and describe their fea-
competitors make sure to include 2-3 products from tures following the selection criteria.
local competitors, preferably those that have the largest > Worksheet B2
market shares.
> To get inspiration for environmental improvements make Step 3_ What is the functional unit
sure to include 2-3 products from competitors that and system boundary of the D4S
have good environmental performance, image, and/or Benchmark?
that operate in an environmental niche market.
> To know where the product stands in relation to (specific) The context in which a product will be used influences
upcoming legislation make sure to choose products from the results of the benchmark. For example, the intensi-
brands that will be affected by the same legislation ty of use of a product will have a serious impact on the
and/or products from brands that are operating in mar- level of the product’s energy consumption during a cer-
kets that already have similar legislation. tain period. To make a clear comparison of products, it
> To see performance improvements over time within is essential to describe the function, the context, user
product groups of the company make sure to choose scenario and system boundaries.This is usually referred
products from the previous generation of the compa- to as the ‘functional unit’ and enables a ‘fair’ comparison.
ny’s own brand. Using several products of the company’s Addressing the following can be useful:
main competitor to benchmark rate of improvement > Identify the perceived function(s) of the product 77
can also be useful. according to the user;
> Describe the average user within his or her context;
> Identify the location where the product will be used and; sense. Perceptions of the general public are strongly
> Determine a user scenario describing elements such linked to emotions. Environmental issues related to
as the intensity of product use. health and safety (and therefore potential toxicity)
score high.Whereas concerns about resources are con-
> Determine the functional unit of the product. sidered a more long-term issue and thus score low.
> Worksheet B3 Concerns about emissions generally score medium (see
also Part I).
Step 4_ What are the focal areas for
the D4S Benchmark? How to choose focal areas for environmental
improvement?
To determine the main product variables to be bench- A number of environmental issues will be generated
marked, it is necessary to identify what issues or focal after evaluating the scientific, government and con-
areas are of ‘environmental’ relevance. This should be sumer perceptions. The next step is to prioritize these
done from a broad perspective. Answers to the ques- issues. To keep the process short and manageable, a
tions ‘what is environmentally sound?’ or ‘what is maximum of 5-6 main environmental issues should be
green?’ depend on the perceptions of different stake- chosen.This can be done based on the size of environ-
holders. In practice, this requires at least three perspec- mental impacts, financial aspects, and/or customer per-
tives - from scientific, consumer and government points ceptions. Although combining these criteria into a
of view. weighted score can be difficult, in practice, the main
> The scientific perspective of environment_ focal areas will become clear fairly easily, usually targe-
From the scientific perspective, the goal is to identify ting energy consumption, material application and distri-
the key environmental impacts of a product during its bution.
life cycle.This is usually done by applying some form of
a life cycle assessment (LCA) depending on the data
availability. For many products, LCAs are publicly avai-
lable on the Internet. However, it should be noted that
much of the data is based on developed country data-
bases and methods, which may not accurately reflect
the situation of a product life cycle in another part of
the world. In the case that good LCA data are not avai-
lable, a D4S Impact Matrix (see Chapter 5) can be a
practical alternative. Based on these assessments, it is
possible to identify which stages of the life cycle are
important in terms of environmental impact.
> The government perspective of environment_
From the government perspective, it is important to
identify the relevant legal systems for the product(s), as
this might highlight additional environmental issues. Figure 40 ___ The five green focal areas of Philips.
This will determine the priority items on the govern-
ment agenda and may not always reflect the same pri- As an example, Philips Consumer Electronics decided
orities as the scientific perspective (see also Chapter 2). in the mid-1990s that product development, marketing
> The customer perspective of environment_ and sales would focus on five green focal areas: weight
From the customer perspective, yet another number of and materials application, potentially hazardous subs-
78 relevant environmental issues might arise. These are tances, energy consumption, recycling and disposal, and
likely to go beyond the narrow definition of environ- packaging. This was internally and externally communi-
ment and could encompass sustainability in a broader cated by using the focal areas as shown in Figure 40.
Tools including a weight balance, a stopwatch, a mul-
tometer (to measure energy consumption) and a camera
will help obtain and record measurements.
During the disassembly session, other steps of the
Figure 41 ___ IProdesa, producer of dried fruits in
benchmark will present themselves. For example the
Colombia. ‘smart solutions’ employed by competitors and ‘silly
IPRODESA, a medium sized food processing compa- solutions’ in the company product will become obvious.
ny in Colombia, carried out a D4S Benchmark to ex- It is useful to write these observations down!
plore the possibilities to enter the European market of
dried fruits. Five international competitors on the
European market were selected and used to benchmark
the products of IPRODESA. The following five focal
areas were the main focus for the D4S Benchmark:
a_ Environmental aspects of the food and packaging;
b_ Protection of the food;
c_ Distribution and retail;
Figure 42 ___ Example of disassembly session of an
d_ Communication; and electronic product
e_ Perception by consumers.
Specific worksheets for food products can be found on Where no physical products are available for disas-
the CD-ROM. sembly (known as an ‘information’ D4S Benchmark, see
Table 6), other information sources are needed to gain
> Determine the focal areas for the benchmark an understanding of how competition is solving design
process. > Worksheet B4 issues for the focal areas in the reference product.
Often most of the required information can be collec-
Step 5_ How to translate the focal ted through the internet.There are also more traditional
areas into measurable parameters? ways of studying the products of local competitors like
visiting fairs, observing products in the shop and inter-
With the focal areas identified, the next step is to trans- viewing customers.
late them into measurable variables.The challenge is to
translate these ‘qualitative’ focal areas into quantifiable > Organise a disassembly session following a
variables. Energy is expressed in kWh and materials in plan, note all findings and issues that are obvi-
grams, etc. In many cases, it might be necessary to use ous (like smart and silly solutions).
more than one variable to describe one focal area. > Worksheets B6 A and B
> Describe measurable parameters for the focal Step 7_ How to process and compare
areas. > Worksheet B5 the outcomes of the D4S Benchmark?
Step 6_ How to organize a disassembly After the collection of all relevant information for the
session? D4S Benchmark focal areas, the next step is to process
the data. It is advisable to prepare fact sheets for each
In a ‘physical’ D4S Benchmark, the next step is to or- focal area summarizing the compiled information. From
ganize a disassembly session to flesh out and collect these fact sheets all the measurements for the bench-
information on the focal areas. To get the best results marked products can be seen at a glance, which makes
out of a disassembly session it is worthwhile to plan the information more easily interpretable.
79
well and structure it methodically. Do not forget to weigh
and measure the whole product before taking it apart! > Summarize all benchmark findings.
> Worksheet B7
Step 8_ How to review the results and ranked and validated, the options need to be imple-
to generate improvement options? mented and integrated into the company.
There are several ways to come up with D4S improve- > Select the best improvement options by evalu-
ment options. In addition to solutions that the D4S ating them against the potential benefits and
Redesign chapter of this publication might yield, it may feasibility. > Worksheet B9
be useful to consider:
1> Using worksheet B 6B (Issues that are obvious) to Step 10_ How to implement the impro-
identify smart solutions from competitor’s products vement options?
that can be applied to the company products;
2> Using the same worksheet to identify silly solutions The previous steps will result in a number of options
in the company’s products that need improvement in for product improvement. Behind each improvement
comparison to competitor’s products. The competitor option will also be an understanding of why the option
illustrates that the solutions are feasible, so they are is good, beneficial to most or all stakeholders and finan-
likely to be feasible in the company product as well; and cially and technically feasible. Connected to the options,
3> Trying to look for alternatives that have not been are some examples from competing companies that are
considered. already applying these solutions and some measure of
the potential results from implementing them. The
> Review all results and identify improvement product development and decision making processes
options. > Worksheet B8 are different in each company. However, this information
should be very helpful in motivating decision makers to
Step 9_ How to evaluate and prioritize apply or at least consider the improvement options.
the improvement options?
81
Profit
Part III
Reference
information on D4S
D4S Case Studies in
Venus is a medium-sized Guatemalan company located This D4S example is interesting because of the key role
in Guatemala City that produces 150 different kinds of played by the design team throughout the project. The
candies in the factory. They sell most of their products company does not have a separate product develop-
on the Central and Latin American market and sell a ment department. People from several departments
smaller amount in the USA and South America.The case handle product development as part of their regular
study is a good example of a medium-sized company jobs. Normally, the development process of a new prod-
that does not have a design department and where uct takes between 3 and 6 months. When bigger
product development is a team effort. changes in the production process are needed, the
process can take up to one year.
Motivation for D4S For this project, executed in 1999,Venus organized a
team of people usually involved in product development
The project was undertaken as part of a Regional and others that could usefully contribute.The team con-
Ecodesign Project supported by CEGESTI, a Costa sisted of:
Rican Research Institute, the United States > Commercial director;
Environmental Protection Agency and Agency for > Production director;
International Development and the Delft Technical > Head of quality control;
University, The Netherlands. The project sponsored > Technical advisor of the company; and the
ecodesign projects throughout Central America. Venus > Marketing director.
wants to sell products in new markets and especially in The team had monthly meetings during the project
the European market. Because of the different kind of and ideas for new products came from each of the team
requirements on the European market, for instance members and were discussed. Analysis of the ideas was
packaging, some product changes were needed and executed by different members of the team, depending
Venus decided to use a D4S approach for this innova- on their expertise. The work on the selected product
tion process. was divided amongst team members, each with specific
goals and time schedules.Testing was done both for the
production process and for marketing. The president of
the company made the final decisions on production and new, smaller bags that were implemented in production
market issues and was informed regularly by the team. for the local market. The new pillow pack with more
than 40% material reduction was released into the mar-
Improvement options ket. The company implemented some of the other
improvement options related to the distribution system
Hard-boiled candies were selected as the project prod- which resulted in interesting cost savings.
uct because of the great variety and it is the best selling
and cheapest product to produce (accounting for 80% For more information: see CEGESTI (1999),Augustijn and
of the turnover). To reduce environmental impacts, Uijttewaal (1998) and Crul (2003).
options were generated to address the use of packaging
material - more environmentally sound materials were
sought and the printed area on the wrapper was redu- 7.2 SWOT, Impact
ced to be less work for the machines to print. Analysis and D4S
Pillow pack wrapping for the candies was chosen as Strategies at Talleres
a packaging solution, since a pillow pack saves more than 40% Rea, Guatemala
of raw materials compared to the original single and
double twist wrapper design. In addition, the machine to The company
make the pillow pack was much faster than the previous
wrapper machines and produced less material waste. Talleres REA (Guatemala City) is a family company of 35
Cast PP material was selected for the bags instead of employees with 50 years of experience in producing
laminate BOPP (which poses problems for recycling and machinery for coffee processing. REA produces all the
needs glues) for the packaging. In Central America it is products necessary for converting red coffee berries
possible to recycle PE. Therefore, it was suggested that into the brown beans that end up in coffee all over the
the company collect the PE used in transport and have world. The company has a workshop with traditional
it taken to a recycler by the trucks on the return trip. machines for working with metals.
The company could earn money from selling the PE
bags to the recycler. Motivation for D4S
The project
89
Improvement options
93
Figure 50 ___ ragbag products: shoulder bag (top) and
Figure 48 ___ Rag pickers in Delhi. organiser (bottom).
The Ragbag collection currently (2006) consists of National Cleaner Production Centre (NCPC) of Costa
fashionable shoulder bags, backpacks, shopping sacks Rica and Delft University of Technology, The
and wallets, Netherlands. The product redesigned was a 1.8 litre
HDPE bottle. In 2005, Microplast produced, on a small
For more information: see www.ragbag.nl scale, a bottle of this size for milk and juices. The mar-
ket for this type of bottle was increasing and the old
bottle which had a lot of improvement potential, made
7.6 Product redesign: a it an interesting product for this project.
plastic bottle at
Microplast, Costa Rica The project
The company The redesign of the 1.8 litre HDPE bottle of Microplast
was carried out in cooperation with a large Costa Rican
Microplast is a plastic products company in Costa Rica food company. This company used 300,000 1.8 litre
with 70 employees, founded in 1981.The company uses HDPE bottles per month. As a starting point for the
25 tonnes of plastic per month to make different bot- redesign effort, the bottle from MicroPlast was com-
tles for pharmaceutical, cosmetic and food products. pared to two bottles used by the leading competing
company. The average weight of a bottle without a top
Motivation for D4S was between 60 and 70 grams.The bottles were distrib-
uted in standard HDPE boxes.The boxes were also used
The project was undertaken by the company CEGESTI, for other types of packaging such as Tetra Pack and Tetra
a Costa Rican Research Institute, the UNIDO UNEP Brik.The company was able to put 12 bottles in one box.
94
Figure 51 ___The old Microplast bottle and the Figure 52 ___ New crate and mechanical characteris-
Microplast factory. tics of new bottle.
Improvement options > Environmental impact reduction of 43%
> Better ergonomics
The main environmentally focus areas were: > Less reprocessing during production
> Reduction of used material per bottle (D4S Strategy 2) > More attractive design
> Reduction of impact of packaging material per litre What does this mean in practice? On a scale of
content (D4S Strategy 1 and 2) 300,000 bottles per month, this would mean a reduc-
> Reduction of waste material during production (D4S tion of 9000 kilos of HDPE per month and thus a sav-
Strategy 3) ings of 108 tons of HDPE per year. Furthermore, it was
> Higher efficiency in distribution (D4S Strategy 5) possible that the plastic packaging industry in Costa
Next to the environmental focus areas, the following Rica would respond to the new thinner bottle of
areas were also taken into account: MicroPlast by developing new and better products.This
> Improve the ergonomic characteristics of the bottle could have a positive influence in the plastic packaging
> Improve the aesthetics of the bottle industry in Costa Rica.
The wall thickness of the old bottle was approxi-
mately 0.6 mm. Benchmarking in The Netherlands
proved that it was possible to reduce the thickness to
0.2 mm. This is only possible when the blow-molding
machinery is equipped with a Parison Control system.
With such a system, a wall thickness for the new bottle
of 0.3 mm was a feasible goal. New machinery and
Parison Control would also reduce the amount of
waste material during production.
To determine the dimensions of the new bottle, the
dimensions of the distribution box were taken into
account. With the dimension of the new bottle, it was
possible to put 15 instead of 12 bottles in the distribu- Figure 53 ___ The new bottle.
MAKSS Packaging Industries Ltd. has 135 employees, As a first result MAKSS launched two redesigned prod-
was established in 1994 and produces 2,500,000 kg cor- ucts on the Uganda market in November 2002 - the 5
rugated cardboard boxes per year. It was one of the first kg fruit box and the flower box for export. Both were
companies to get in touch with the Uganda Cleaner redesigned according to D4S criteria.
Production Centre (UCPC) in 2002 when the UCPC The redesigned box for flower export has the fol-
launched a D4S Redesign project. lowing advantages:
> Resource efficiency_ A 167 gram reduction in
Motivation for D4S weight equal to 12% of the original design.
> Improved production process_ The production
UCPC found that MAKSS had significant potential to of the box involves one production step less since the
improve their production process of corrugated card- bottom is 3 ply instead of 5.The box is self-locking and
board boxes and to innovate its products. The design does not require any tape or staples.
of the fruit box, for example, was traditional and had > Cost reduction_ The box is sold at a cheaper price
not changed in 20 years. It consisted of two pieces of to the customer, air cargo charges (approximately 1.5
cardboard which required a separate production U$/kg to Europe) are less since it is lighter.
process for each. The traditional boxes were formed > Functionality and customer satisfaction_ This
by using metal staples or tape. Transportation was design offers better ventilation for the flowers, so the
done first via trucks on rough roads and later via air, product can be better protected and the flowers are in
mainly to Europe. Corrugated cardboard boxes need better shape and consequently have higher value.
to be very robust and lightweight at the same time. The D4S redesigned box for fruit has the following
Light weight engineering could improve both aspects: advantages:
reducing the material input for the sake of environ- > Resource efficiency_ A 60 gram reduction in
mental considerations and reducing costs due to weight equal to 10.7%
expensive air transportation. > Improved production process_ The production
of the box involves one production process less since
The project the MAKSS D4S redesign box is a one-piece box. Off-
cuts are utilized to make pads for other boxes.
UCPC invited MAKSS to become the pilot company for > Cost reduction_ The box is sold at a cheaper price
the first D4S training course in August 2002. Initial ideas to the customer, air cargo charges (approximately 1.5
were generated during this workshop, such as reducing U$/kg to Europe) are less since it is lighter.
the thickness of the corrugated cardboard from 5 layers > Functionality and costumer satisfaction_
to 3 layers and strengthening the boxes with stiff edges Stability and ventilation are excellent. The easy locking
and stiffeners at the same time. Furthermore, the idea system saves time. A one-piece box is easier to handle
of integrating the lid into the box design, which could and less space is needed for packing. Furthermore,
help reduce the total mass of the box, was found. there is no problem with imbalance in stocks between
In the next phase, MAKSS Packaging Industries Ltd. tops and bottoms.
96 started its own project. Intensive discussions took place
with the different customers (flower producers, fruit For more information: contact the Uganda Cleaner Pro-
and vegetable exporters etc.) to find out their require- duction Centre at www.ucpc.co.ug
the Delft faculty of Industrial Design Engineering to
develop a solar lighting product.
The project
98
Figure 57 ___ Crate trailer and Multi trailer.
identifying the available materials, further constraints were production, models were constructed. This required
encountered and considerations were made. locating a workshop, a welder, buying the materials, and
Three design directions resulted in three concepts, finding specific components for the construction of
the Plain trailer, the Combi trailer, and the Crate trailer. details of the trailers.
The Plain trailer concept consisted of one loading As soon as the models were finished, they were tes-
space, created with wire mesh.The Combi trailer could ted in the two regions in the south. After observation
carry almost any kind of container and had the possibil- and evaluation of the models in use, small changes were
ity to create one space, from wire mesh as well. The made to improve performance. The last test in the
Crate trailer could only fit plastic crates from an indus- north was performed and evaluated as well. It appeared
trial containers producer in Tema. After taking several that at least twice the amount of head load could be
steps in development a fourth concept, the Multi trailer transported in the same time or even faster. The users
was generated out of the Combi and Crate trailers.The of the trailer appreciated the ease of use and maneuve-
Multi trailer concept offered the opportunity to use ring, the increased amount of products that could be
almost any kind of container to transport the crops. It loaded and the width of the total trailer which could be
was especially designed for current use as well as future used on small paths.
use anticipating the introduction of a complete logistic After testing both the Crate trailer and the Multi
system based on crates by REAL. trailer on the design guidelines, it was evident that the
After comparing the four concepts on design guide- Multi trailer needed to be further defined. The dimen-
lines, the Crate trailer and the Multi trailer proved to be sions of the Multi trailer were further optimized in
the two most feasible concepts. Both concepts were Solidworks, a 3D modeler, in the Netherlands. This
constructed in a Ghanaian workshop. Before going into model contains the basic construction and some details.
99
Figure 58 ___ Crate trailer (t) and Multi trailer (b). Figure 59 ___ Testing of the trailer.
Results improve business with less environmental impact com-
pared to the reference product. The project was part of
Multi trailer potential results include: the regional Ecodesign Programme.
> Transportability was improved. The trailer was sui-
table for single path roads, double track grass roads, The project
feeder roads and asphalt roads, except for Abor where
it is only suitable for single and double track roads. In 1998 the project identified a product to benchmark.
> Efficiency was increased. Twice the amount of crops It was a vertical commercial refrigerator which is sold
could be transported in the same time or faster. to small shops and restaurants to cool and display their
> Ergonomics of handling crops was improved.The bur- products and to larger clients such as the government
den on the farmers (men and women) was lightened. and producers of meat and beer products. Cost reduc-
> The trailer could be produced locally. It could be pro- tion, cooling efficiency and the manager’s environmental
duced with production methods available in Ghana and consciousness were the main drivers to design from an
made from locally available materials. environmental point of view. The priorities for the
Recommendations for further dissemination of the redesign were to:
REAL trailer were: > improve the cooling quality;
> The construction of the trailer could be optimised for > reduce energy use during life-time; and to
weight and weld type and production could be simpli- > increase ease of maintenance.
fied.
> Promote the use of trailers amongst women, as well Improvement options
as in the transport of the crops.
In summary, the Multi trailer reduced the post harvest Improvement options were generated with an ‘informa-
losses thereby increasing the farmers’ income. Labour tion benchmark’ approach. One element of the bench-
conditions have improved due to the lighter burden. mark was the evaluation of products from direct com-
petitors. A lot of small Cost Rican competitors and a
For more information: see Steinbusch (2003) few international brands are on the market. Information
On the basis of this information benchmark, the design Cassava is an upcoming and promising crop in Tanzania
brief for the redesign of the product was formulated which can be processed into starch for food purposes
and development was started. The concept with the and used as an input for the local textile industry.
best results was applied in the final prototype. The Intermech decided to develop a range of products
improvements included: based on processing the harvested cassava into high
> less pull-down time needed to lower the tempera-
ture;
> better distribution of the cooled air by repositioning
of the ventilator; and
> less energy needed to reach the same temperature.
In order to reduce the energy use during lifetime
further, a substitution to eliminate the resistance in the
door was developed. The resistance was used to heat
the outside window in order to avoid condensation on
one side of the window. Another adjustment to increa-
se energy efficiency was to reposition the TL inside the
refrigerator. This adjustment was applied successfully.
Small improvements on the maintenance were applied
directly and achieved by benchmarking during the
external analysis. These improvements resulted in an
improvement in the ease of cleaning and repairing. The
product improvements were implemented in the pro-
duction directly and during the development phase.
101
Figure 61 ___Intermech metal workshop in
Morogoro, Tanzania.
quality starch. As a first step, a new cassava grater was Results
developed in 2003. In order to develop the first model,
several other existing models were benchmarked One of the outcomes from the redesign project was the
through observation of illustrations, the internet and replacement of the wooden drum with one produced
competitors’ products found at fairs. Based upon this from cast aluminum and perforated sheet. The new
benchmark, a version with a wooden drum with needles metal drum:
was developed (see Figure 62). > Had fewer parts and production operations, resulting
in lower production costs;
> Used locally available materials;
> Increased efficiency while processing cassava;
> Had a longer expected lifespan; and
> Improved ergonomics and safety for the user.
After the successful benchmarking and redesign of
the cassava grater, Intermech continued with develop-
ment of the next product in the cassava processing line:
the starch extractor.
103
lasts, and shavers, to complete medical systems. Since sustainable products.This kind of programme has good
the first project more than 100 D4S Benchmarks have potential to build technical capacities in countries at the
taken place within Philips. implementation level.
One example is the preliminary development of a
For more information: see Caluwe (2004) and Eenhoorn freight bicycle for Peru and Indonesia, by engineer Lulus
and Stevels (2000) Ketriyanto (Indonesia) and designer Ricardo Geldres
Piumatti (Peru).
105
008
D4S Rules of Thumb
Here are some basic suggestions to take into account when brainstorming
product improvement options.They can be used as a checklist or as a source
of inspiration. These 'rules of thumb' are organized according to the D4S
strategies outlined in Chapter 5.
1> Selection of
low-impact materials_
a> Cleaner materials d> Recycled materials
1_ Do not use materials or additives which are prohib- 9_ Use recycled materials wherever possible, to
ited due to their toxicity.These include PCBs (polychlo- increase the market demand for recycled materials.
rinated biphenyls), PCTs (polychlorinated terphenyls), 10_ Use secondary metals such as secondary aluminum
lead (in PVC, electronics, dyes and batteries), cadmium and copper instead of their virgin (primary) equivalents.
(in dyes and batteries) and mercury (in thermometers, 11_ Use recycled plastics for the inner parts of prod-
switches, fluorescent tubes). ucts which have only al supportive function and do not
2_ Avoid materials and additives that deplete the ozone require a high mechanical, hygienic or tolerance quality.
layer such as chlorine, fluorine, bromine, methyl bro- 12_ When hygiene is important (as in coffee cups and
mide, halons and aerosols, foams, refrigerants and sol- some packaging) a laminate can be applied, the centre of
vents that contain CFCs. which is made from recycled plastic, covered with or
3_ Avoid the use of summer smog-causing hydrocar- surrounded by virgin plastic.
bons. 13_ Make use of the unique features (such as variations
4_ Find alternatives for surface treatment techniques in colour and texture) of recycled materials in the
such as hot-dip galvanization, electrolytic zinc plating design process.
and electrolytic chromium plating.
5_ Find alternatives for non-ferrous metals such as cop- e> Recyclable materials
per, zinc, brass, chromium and nickel because of the 14_ Select just one type of material for the product as
harmful emissions that occur during their production. a whole and for the various sub-assemblies.
15_ Where this is not possible, select mutually compa-
b> Renewable materials tible materials.
6_ Find alternatives for exhaustible materials. 16_ Avoid materials which are difficult to separate such
as compound materials, laminates, fillers, fire retardants
c> Lower energy content materials and fiberglass reinforcements.
7_ Avoid energy-intensive materials such as aluminum 17_ Preferably use recyclable materials for which a mar-
in products with a short lifetime. ket already exists.
8_ Avoid raw materials produced from intensive agri- 18_ Avoid the use of polluting elements such as stick-
culture. ers which interfere with recycling.
f> Materials with positive social impact, i.e., by b> Fewer production steps
generating local income 29_ Combine constituent functions in one component
19_ Make use of materials supplied by local producers. so that fewer production processes are required.
20_ Stimulate arrangements for recycling of materials 30_ Preferably use materials that do not require
by local companies which can substitute (part of) the additional surface treatment.
raw materials of the company.
c> Lower/cleaner energy production
31_ Motivate the production department and suppliers
2> Reduction of to make their production processes more energy effi-
materials usage_ cient.
32_ Encourage them to make use of renewable energy
a> Reduction in weight sources such as wind energy, water power and solar
21_ Aim for rigidity through construction techniques energy. Where possible, reduce the use of fossil fuels
such as reinforcement ribs rather than ‘overdimension- and reduce environmental impact by, for example,
ing’ the product. choosing low-sulphur coal or natural gas.
22_ Aim to express quality through good design rather
than over dimensioning the product. d> Less production waste
33_ Design the product to minimize material waste,
b> Reduction in (transport) volume especially in processes such as sawing, turning, milling,
23_ Aim at reducing the amount of space required for pressing and punching.
transport and storage by decreasing the product’s size 34_ Motivate the production department and suppliers
and total volume. to reduce waste and the percentage of rejects during
24_ Make the product foldable and/or suitable for nest- production.
ing. 35_ Recycle production residues within the company.
25_ Consider transporting the product in loose com-
ponents that can be nested, leaving the final assembly up e> Fewer/cleaner production consumables
to a third party or even the end user. 36_ Reduce the production consumables required – for
example, by designing the product so that during cutting
waste is restricted to specific areas and cleaning is
> Optimization of
3> reduced.
production techniques_ 37_ Consult the production department and suppliers
as to whether the efficiency with which operational
a> Alternative production techniques materials are used during production can be increased
26_ Preferably choose clean production techniques that – for example, by good housekeeping, closed produc-
require fewer harmful auxiliary substances or additives tion systems and in-house recycling.
(for example, replace CFCs in the degreasing process
and chlorinated bleaching agents). f> Safety and cleanliness of the workplace
27_ Select production techniques which generate low 38_ Choose production technologies that require
emissions, such as bending instead of welding, joining fewer harmful substances and generate less toxic emis-
instead of soldering. sions.
28_ Choose processes which make the most efficient 39_ Use production techniques that generate less
use of materials, such as powder coating instead of wastes, and organize efficient in-company re-use and
spray painting. recycle systems for the remaining waste.
108 40_ Implement systems for in-company working condi-
tions, health and safety like SA8000.
> Optimization of
4> > Reduction of impact
5>
distribution system_ during use_
a> Less/cleaner/reusable packaging a> Low energy consumption
41_ If all or some of the packaging serves to give the 54_ Use the lowest energy consuming components
product a certain appeal, use an attractive but lean available on the market.
design to achieve the same effect. 55_ Make use of a default power-down mode.
42_ For transport and bulk packaging give consideration 56_ Ensure that clocks, stand-by functions and similar
to reusable packaging in combination with a monetary devices can be switched off by the user.
deposit or return system. 57_ If energy is used to move the product, make the
43_ Use appropriate materials for the kind of packaging product as light as possible.
– for example, avoid the use of PVC and aluminum in 58_ If energy is used for heating substances, make sure
non-returnable packaging. the relevant component is well insulated.
44_ Use minimum volumes and weights of packaging.
45_ Make sure the packaging is appropriate for the b> Clean energy source
reduced volume, foldability and nesting of products – 59_ Choose the least harmful source of energy.
see strategy 2b. 60_ Do not encourage the use of non-rechargeable bat-
teries – for example, a portable radio can be supplied
b> Energy efficient transport mode with a battery charger, encouraging the use of recharge-
46_ Motivate the sales department to avoid environ- able batteries;
mentally-harmful forms of transport. 61_ Encourage the use of clean energy such as low-sul-
47_ Transport by container ship or train is preferable to phur energy sources (natural gas and lowsulphur coal),
transport by lorry. fermentation, wind energy, water power and solar energy.
48_ Transport by air should be prevented where possi- An example is a solar heater which does not require
ble. energy for heating water during the summer.
Creativity can be defined as ‘all the ways of thinking that Multidisciplinary teams are important to successful cre-
lead to something new and useful for the thinker’. A ativity sessions because it provides diversity in interac-
creativity technique should help generate new ideas. tions and enables building novel associations. In group
Creativity tools can: brainstorming, the free flow of ideas can be stimulated
> Come up with new ideas; by including open-minded group members from differ-
> Break through fixed ways of thinking; ent disciplines that are not afraid to ask ‘stupid’ ques-
> ‘Think out of the box’ - thinking beyond current solutions; tions. A group might, for example, select a range of dif-
> Build upon each others ideas; and ferent people: generalists and specialists, and creative
> Develop new inspiring and surprising ideas. people that are not experts in the field.
To understand how the techniques work and how
they can contribute to the product development Mind-set
process it is necessary to put them into practice.
In using creativity techniques, one should be as open-
Group versus individual creativity minded as possible and try to avoid criticism of the
techniques ideas that are generated because this can cut off poten-
tially useful ideas. A positive attitude is the strong foun-
In general, brainstorming in a group generates more dation of a successful creativity session. The following
ideas, but sometimes the group culture may hinder re- rules can facilitate the creativity process:
volutionary ideas. Group techniques use the ideas of > Group members should be able to express them-
others for inspiration. Group members can use each selves freely and openly without censorship and should
other’s information as input for further stimulation. operate with appropriate respect towards others;
Individual brainstorming can lead to original ideas > There should be no judging of people and;
but there is a danger that the outcomes are predeter- > It should be okay for members to ‘lie’.
mined or limited to the idea originator’s way of thin-
king. In individual brainstorming, free association initial- Session facilitator
ly yields seemingly irrational outputs that later can be
refined into more recognizable concepts. Brainstorming can be greatly enhanced by appointing a
Given the potential and limitations of these facilitator to guide the session. The facilitator should
approaches it is recommended to apply both individual guide the session and not let his or her own opinions
and group brainstorming in the same project. interfere with the expression of other peoples’ opinions.
The facilitator should keep track of time and allow Example_
everyone who wishes to express an opinion at both the ”How can we generate a more positive attitude
individual and group level. It is very helpful if the facilita- towards Photo Voltaic (PV)?” is a broad formula-
tor has a good general knowledge of the subject. tion. It becomes more specific if the statement
focuses on children: ”How can we inform chil-
The step-by-step process for a creativ- dren about PV so that they develop a more posi-
ity session tive attitude towards it?” An example of an even
more focused problem statement would be:
Similar to the steps of product development process, “What can children play with that is made of
each step of the creativity process has two main pha- PV?”, or “How can we motivate children to play
ses: a divergent phase and a convergent phase (see also with outdoor play equipment made from PV?”
Chapter 3). In other words, each phase starts with a
‘problem’ definition, followed by a divergent phase C_ Start with ‘how’ or ‘invent’.
which includes the ’creation’ or ‘widening’ of a field of The pronouns ‘who, what, where, when’ and ‘why’ invite
possibilities which includes collecting and generating data collection. In order to stimulate solution genera-
facts, problem statements, and ideas, without criticism. tion, it is better to start with ‘how’ or ‘invent’. The
Then resultant solutions are clustered and categorized, ‘how’question focuses on the way or principle. The
followed by a convergent phase in which there is a nar- invent focus more on the end result.
rowing of choices based on criteria of what is useful and
relevant. (See Figure 64.): Divergent phase
1> Problem definition
2> Divergent phase During the divergent phase of the creativity process, a
3> Clustering / categorizing large number of alternatives are identified.
4> Convergent phase At this stage the most important rule is: ‘quality is
The four stages of the creativity process each de- quantity’ to generate as many solutions and new ideas
mand a different attitude from the participants. as possible. Free association plays an important role
during this stage. In addition, the rule of not judging
Problem definition ideas is essential. When confronted with new ideas or
concepts it is important that participants take a con-
The fomulation of the problem definition for the cre- structive stance.
ativity session has a big impact on the outcomes of the
creativity session. If the problem is not defined accu-
rately, the created results might be irrelevant for the
project. Guidelines for defining a problem include:
A_ Formulate the goal of the creativity session in one
sentence.
Formulate from the project focus (the problem) in a
concise and clear way. It forces the team to tackle the
core of the problem. Often a problem consists of sev-
eral sub-problems. It is recommended to tackle the sub-
problems first, and then to bring the sub-solutions
together.
B_ Keep a real and tangible focus.
114 If the problem defined is too abstract, the results will be
general and will lead to sub-optimal solutions.
Done properly, many ideas and solutions will have been There are differences between textual and visual cre-
generated and collected during the divergent phase.The ativity techniques. General speaking, it is time (visual
sheer number of new options will make it hard to come creativity techniques require more time than textual)
to select the best ones. For that purpose, an additional and quantity (textual) versus detail (visual). Both kinds
stage of ‘cleaning up’ and acquiring an overview of the of techniques have advantages and disadvantages.
options generated (over 200 ideas is not unusual!) is Drawing may cover more of the original ideas because
useful before moving on to evaluation and selection. In one does not have to reduce the idea into words but
this phase ideas are grouped together based on com- one has to be able to draw what one thinks. Textual is
monalities. At this stage some ideas may be clarified faster, but there can be problem with foreign languages
and/or elaborated upon for clarification. and limitations because of the meaning of the words
used. As a bottom line, creative techniques should be
Converging phase provocative and force thoughts out of the normal rou-
tine and into the open.
In the converging phase, all the ideas have the benefit of
the doubt (the value of the idea may not be apparent at
first), but one should also make decisions and work Examples of creativity
towards the stated objective. The alternatives chosen tools
are then evaluated and selected.
1> Classical Brainstorming
The term Brainstorming has become a commonly used
word in the English language as a generic term for cre-
ative thinking. The basis of Brainstorming is generating
ideas in a group situation based on the principle of sus-
pending. The generation phase is separate from the
judgment phase of thinking. Basic rules for Brainstor-
ming are:
> The facilitator writes down all the ideas on a large
sheet of paper or board;
> The participants call their spontaneous ideas as a
reaction on the problem definition;
> The participants associate on each others ideas;
115
2> BrainWriting
BrainWriting is a technique similar to brainstorming.
There are many varieties, but the general process is that
all ideas are recorded by the individual who thought of
them.They are then passed on to the next person who
uses them as a trigger for their own ideas. BrainWriting Figure 68 ___ Participants in a BrainWriting session cre-
enables people who have ideas but are concerned about ating solutions for packaging waste on the street.
voicing them in a broader group to anonymously make
them visible. They thus do not have to ‘compete’ with speed things up because everyone is offering ideas all of
others to be heard. It also helps that all ideas are visible the time. Examples of this include:
and can be easily scanned to trigger new ideas. It can BrainWriting Pool_ Each person, using Post-it notes or
small cards, writes down ideas, and places them in the
centre of the table. Everyone is free to pull out one or
more of these ideas for inspiration. Team members can
create new ideas, variations or piggyback on existing ideas.
BrainWriting 6-3-5:_ The name comes from the
process of having 6 people write 3 ideas in 5 minutes.
Each person has a blank 6-3-5 worksheet (see Figure 67).
Every participant writes the problem statement at
the top of his or her worksheet (word for word from an
agreed problem definition). They then write 3 ideas, on
the top row of the worksheet in a complete and concise
sentence (6-10 words). After five minutes, the work-
sheets are passed on to the next person upon which
116 each participant writes down another 3 ideas. The
process continues until the worksheet is completed
resulting into a total of 108 ideas on the 6 worksheets.
Figure 67 ___ 6-3-5 BrainWriting worksheet.
3> Mind Mapping The ‘Five Ws and H’ is a divergent creativity tech-
Mind mapping, also called ‘spider diagrams’ represents nique and can be used during the early stages of prob-
ideas, notes, information etc. in far-reaching tree-diagrams. lem solving to gather information and to define more
To draw a mind map: detailed the main (sub)problems to be solved. The
> Lay-out a large sheet of paper in landscape format and checklist can be useful either as an informal or system-
write a concise heading for the overall theme in the atic way of generating lists of questions for which to find
center of the page. answers.
> For each major sub-topic or cluster of material, start A Mind Map, with the ‘Five Ws and H’ as starting nodes
a new major branch form the central theme, and label it. can be used to facilitate the process (see Figure 69).
> Each sub-sub-topic or sub-cluster forms a subordi-
nate branch to the appropriate main branch. 5> SCAMPER
> Carry on in this way for every finer sub-branches. The SCAMPER technique is a checklist that will assist in
It may be appropriate to put an item in more than thinking of changes that can be made to an existing
one place, cross-link it to several other items or show product to create a new one. These changes can be
relationships between items on different branches. used either as direct suggestions of change or as start-
Coding with colour, character or size can do this. Alter- ing points for lateral thinking.‘SCAMPER’ stands for the
natively, the use of drawings instead of writing may help following seven kinds of potential product changes:
bring the diagram to life. S – Substitute – components, materials, people;
Software packages, like Freemind (for free down- C – Combine – mix, combine with other assemblies or
loadable from http://freemind.sourceforge.net/) services, integrate;
are available that support working with mind maps, thus A – Adapt – alter, change function, use part of another
making it easier to amend and reshuffle the map. element;
M – Modify – increase or reduce in scale, change shape,
4> Five Ws and H modify attributes;
The ‘Five Ws and H’, are six universal question and are P – Put to another use;
an influential, inspirational and imaginative checklist. E – Eliminate – remove elements, simplify, reduce to
The technique uses basic questions generating prompts: core functionality;
R – Reverse – turn inside out or upside down.
Who? Start by isolating the product or subject that will be
Why? the focus. Next ask for the seven SCAMPER topic ques-
What? tions about the product or subject. Continue asking
Where? “How can…..?”, “What else…..?”, “How else…?” for
When? every idea.
How?
6> Analogies
Analogies are used to estrange the participants them-
selves from the original problem statement and to
come up with inspiration for new solutions and
approaches. These analogies can take a number of
forms, which are presented in Table 12.
118
>>>
Resources and
Further reading
Information is provided on additional available resources and on sources used
and/or referenced in each of the chapters. Information includes internet sites
and publications and is not exhaustive.
UNEP DTIE
UNITED NATIONS ENVIRONMENT
PROGRAMME
Division of Technology Industry
and Economics
UNEP (2005). Background Report for a UNEP Guide World Business Council for Sustainable
to Life Cycle Management. Development
http://www.wbcsd.org/
D’ Almeida, N. and C. Pardo (2004). Meeting report of Boks, C. and A. Stevels (2003). “Theory and Practice of
the global compact policy dialogue on sustainable con- Environmental Benchmarking for Consumer
sumption, marketing and communications. UNEP (in Electronics.” Benchmarking - An International Journal
collaboration with Global Compact.) 10(2): 120-135.
Ryan, C. (2002). Sustainable consumption: a global status Brezet, H., J. C. Diehl, et al. (2001). From EcoDesign of
report. UNEP (in collaboration with the International Products to Sustainable Systems Design: Delft’s
Institute for Industrial Environmental Economics Experiences. 2nd International Symposium on
(IIIEE)), UNEP, Paris. Environmentally Conscious Design and Inverse
Manufacturing (EcoDesign 01),Tokyo.
UNEP (in collaboration with the European Association
122 of Communications Agencies (EACA) and the World Brezet, J. C. and C. G. v. Hemel (1997). Ecodesign: A
Federation of Advertisers (WFA)) (2002). Industry as a promising approach to sustainable production and con-
partner for sustainable development, UNEP, Paris. sumption. Paris, UNEP.
Crul, M. (2003). Ecodesign in Central America. Design Product Innovation and Needs Assessment
for Sustainability research program. Delft, Delft (Chapters 3 and 4)
University of Technology.
Web-sites
Fuad-Luke, A. (2002). The eco-design handbook. Lon-
don,Thames & Hudson. Business Strategy
http://www.tutor2u.net/revision_notes_strate-
Goedkoop, M. and R. Spriensma (2000). Eco-indicator gy.asp
99 Manual for Designers: A damage oriented method
for Life Cycle Impact Assessment. The Hague, Ministry
of Housing, Spatial Planning and the Environment. Publications
Kaplinski, R. and J. Readman (2001). Integrating local Ansoff, H. I. (1968). Corporate Strategy. Harmonds-
SME’s into global value chains: towards partnership for worth, Penguin.
development.Vienna, UNIDO.
Buijs, J. and R.Valkenburg (2000). Integrale Productont-
Masera, D. (1999). “Sustainable product development: a wikkeling. Utrecht, Lemma.
key factor for small enterprise development – the case of
furniture production in the Purépecha region, Mexico.” Chung, K.-W. (2004). Strategic Advancement in Korean
Journal of Sustainable Product Design(8): 28-39. Design Promotion: How Korea has transferred itself
from an Imitator to a Pioneer in Design Promotion.
OECD (2004). Promoting entrepreneurship and innova- Expert Exchange Conference, Pretoria, South Africa.
tive SMEs in a global economy:Towards a more respon-
sible and inclusive globalisation, OECD. Kogut, B. (2003). Designing global strategies: compara-
tive and competitive value-added chains. Smart
Schvaneveldt, S. J. (2003). “Environmental performance Globalization. A. K. Gupta and D. E. Westney. San Fran-
of products: Benchmarks and tools for measuring cisco, Jossey-Bass.
improvement.” Benchmarking - An International Journal
10(2): 136-151. OECD (2004). Promoting entrepreneurship and innova-
tive SMEs in a global economy:Towards a more respon-
Stevels, A. (2001). Application of Ecodesign:Ten years of sible and inclusive globalistaion, OECD.
dynamic development. Ecodesign 2001,Tokyo, Japan.
Porter, M. E. (1980). Competitive strategy. The Free
SustainAbility (2005). Developing Value: The business Press, New York.
case for sustainability in emerging markets.
Roozenburg, N. F. M. and J. Eekels (1995). Product Design,
Tischner, U., E. Schminck, et al. (2000). How to do Eco- Fundamentals and Methods. Chicester,Wiley & Sons.
design: A guide for environmentally and economically
sound design. Berlin,Verlag Form GmbH. Ulrich, K. and S. Eppinger (2003). Product Design and
Development.
Verloop, J. (2004). Insight in innovation. Amsterdam,
Elsevier. UNDP (2005). Human Development Report, UNDP.
Publications Web-sites
Evaluation Questionnaire
DESIGN FOR SUSTAINABILITY
A Practical Approach for Developing Economies
As part of its continuing review of the impact of its publications and projects it supports, the United Nations Environment
Programme’s Division of Technology, Industry, and Economics would appreciate your co-operation in completing the following
questionnaire.
1> QUALITY
Please rate the following quality aspects of the publication by ticking the appropriate box:
2> USEFULNESS
In general, how much of the publication is:
4> USES
a. Please state how publication will affect or contribute to your work, illustrating your answers with examples.
b. Please indicate, in order of importance (first, second, or third), the usefulness of the publication to you
First Second Third
O O O
For your own information
O O O
As reference material
O O O
Guidelines for on-the-job application
5> DISTRIBUTION
Will others read your copy? O Yes O No O Unknown
If “yes”, how many?
b. Please indicate, in order of importance (first, second or third), which of the following three items might have increased the
publication to you.
First Second Third
O O O
Translation in your own language
O O O
Specific regional information
O O O
Additional technical information
Professional background:
Position/ function/occupation:
Country:
Date:
UNEP would like to thank you for completing this questionnaire. Please photocopy and airmail (or scan) to: