Covalence WPC100M Shrink Sleeves PDF
Covalence WPC100M Shrink Sleeves PDF
WPC100M
WPC100M is a two-layer coating system for pipeline operating at ambient and elevated temperature.
WPC100M field-joint coating. Construction: Two-layer system: First layer: Visco-elastic adhesives sealant. Second layer: Radiation cross-linked, high density polyethylene WPC100M is a wraparound heat-shrinkable sleeve specially suitable for higher stress conditions caused both by elevated temperatures and by soils with severe contraction between wet-dry cycles. The WPC100M is compatible with most commonly used steel pipe sections and large radius bends. WPC100M may be cut to the appropiate length to cover all pipe diameters. The installation is carried out directly on the cleaned and pre-heated surface without any primer required. During installation, the heat-shrinkable sleeve is wrapped around and shrunk to form a tight fit around the joint. During recovery, the adhesive softens and flows to form a perfect bond with the pipe surface providing protection against corrosion. The radiation cross-linked outer layer forms a tough barrier against mechanical damage and moisture transmission.
Product features/benefits
U Dimpled backing provides a 'permanent change' indicator for application of heat Ensures correct application heat & allows easy post-heat inspection. Reliable inspectability at any time. Low preheat sensitivity & proven functionality Installation friendly in combination with high functional performance. Available as all-in-one unit or roll form Saves money by keeping inventory and logistics costs low. High shear resistance WPC offers safer protection Covers a wide range of operating temperature ratings Offers a solution for nearly every application. No special equipment (standard gas & a roller) Makes installation fast and easy. Keeps installation costs low.
U U U U U
Product thickness
WPC100M/1.4-1.1** Backing (as supplied) Backing (fully free recovered) Adhesive (as supplied) 0.030 in. (0.75 mm) 0.040 in. (1.0 mm) 0.040 in. (1.0 mm) 0.040 in. ( 1.05 mm) 0.055 in. (1.4 mm) 0.043 in. (1.1 mm) WPC100M/C** 0.040 in (1.05 mm) 0.055 in (1.4 mm) 0.060 in (1.5 mm)
11" (11.25 or 285 mm)(1)(2), 17" (17.75or 450 mm) (1)(2) , (1)(2) 20" (20.25 or 514 mm)(1)(2), 24"(23.5 or 600 mm) (1)(2), 34" (34.25 or 870 mm)
11" (11.25 or 285 mm)(1)(2), 17" (17.75or 450 mm)(1)(2) , 20" (20.25 or 514 mm)(1)(2), 24"(23.5 or 600 mm) (1)(2) , 34"(34.25 or 870 mm)(1)(2) 100 ft (= 30 m), 66 ft (=20 m, for 34" (870 mm)width)
Sleeve cut lenths and appropriate closure patch widths depend on the pipe size and product construction, see latest application table AT-GIRTHWELD. For proper product installation, see latest installation instruction.
(1) nominal width (2) not standard in all countries
Berry Plastics warrants that the product(s) represented within conform(s) to its/their chemical and physical description and is appropriate for the use as stated on the respective technical data sheet when used in compliance with Berry Plastics written instructions. Since many installation factors are beyond the control of Berry Plastics, the user is obligated to determine the suitability of the products for the intended use and assume all risks and liabilities in connection herewith. Berry Plastics liability is stated in the standard terms and conditions of sale. Berry Plastics makes no other warranty either expressed or implied. All information contained in the respective technical data sheet(s) should be used as a guide and is subject to change without notice. This document supersedes all previous revisions. Please see revision date on the right.
DS-WPC100M-REV7-SEP11 - AARPS-0147