Lab8 PDF
Lab8 PDF
Water content needs to be determined at all stages of the manufacturing process from raw materials to finished goods. The quality of the product depends on it. In products such as kerosene, transformer insulation oil or brake oil, the presence of unwanted moisture can have disastrous consequences. In the pharmaceutical industry, it is essential to know the amount of water contained in the ingredients of a drug in order to correctly predict its lifetime, stability and effectiveness. In the food industry, the water content of both raw materials and the finished foodstuff needs to be carefully monitored. The technique most commonly used for these analyses because of its rapidity, accuracy and ease of use is Karl Fischer titration. The titration is based on the oxidation of sulphur dioxide by iodine in the presence of water. It is the same reaction as the iodometric titration of sulphur dioxide in water.
Two-component reagents The solvent The modern solvents available today present a high buffer and dissolution capacity. These solvents consist of sulphur dioxide, a base and methanol. The main advantages of these solvents are: A more rapid titration due to better reaction kinetics. An advantage especially for the titration of large amounts of water. A better reproducibility, because the reaction environment is stable. The pH and the sulphur dioxide concentration remain constant. For the titration of samples producing side reactions (aldehydes, ketones and silanols), it is necessary to use an appropriate solvent. Most reagent manufacturers include the letter K in the commercial name of such solvents. The titrant The titrant consists of iodine dissolved in methanol. We often find that the titrant has three titres 1, 2 and 5 mg of water per ml titrant. Even if it is possible to perform a titration with more than one stroke of the burette piston, it should be avoided by an appropriate reagent titre and choice of sample size. This allows the titration time to be reduced and therefore improves the reproducibility. As for two component reagents, the titration of samples producing side reactions (aldehydes, ketones and silanols), require an appropriate solvent. DL18 Karl Fisher Titrator:
TITRATION INSTRUCTIONS: