Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

BYBU.

XR625 - Fire Resistance Ratings - ANSI/UL 1709

Page 1 of 3

BYBU.XR625 Fire Resistance Ratings - ANSI/UL 1709


Page Bottom

Design/System/Construction/Assembly Usage Disclaimer


Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements covering the installation and use of UL Listed or Classified products, equipment, system, devices, and materials. Authorities Having Jurisdiction should be consulted before construction. Fire resistance assemblies and products are developed by the design submitter and have been investigated by UL for compliance with applicable requirements. The published information cannot always address every construction nuance encountered in the field. When field issues arise, it is recommended the first contact for assistance be the technical service staff provided by the product manufacturer noted for the design. Users of fire resistance assemblies are advised to consult the general Guide Information for each product category and each group of assemblies. The Guide Information includes specifics concerning alternate materials and alternate methods of construction. Only products which bear UL's Mark are considered as Classified, Listed, or Recognized.

Fire Resistance Ratings - ANSI/UL 1709


See General Information for Fire Resistance Ratings - ANSI/UL 1709 Design No. XR625 April 16, 2010 Ratings - 1/2, 3/4, 1, 1- 1/2, 2, 2- 1/2, 3, 3- 1/2, 4 Hr. (See Item 3)

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

27/04/2010

BYBU.XR625 - Fire Resistance Ratings - ANSI/UL 1709

Page 2 of 3

1. Steel Column Min. size W10X49. The column surfaces shall be free of dirt, loose scale and oil then primed with epoxy based primers to an approximate dry film thickness of 2 mils. 2. Flange Edge Reinforcement Carbon fiberglass mesh Type HK-1 applied over the flange tips at approximately mid-depth of the total thickness of mastic coating. 3. Mastic Coating Two component spray materials applied in one or more coats as described in the application instructions to the thicknesses shown below. Thicknesses below include the 2 mils of primer. Rating, Hr 1/2 3/4 1 1-1/2 2 2-1/2 3 3-1/2 4 7850 10570 13300 15210 17100 18990 Mtl Thkns, Microns With Mesh (Item 2) 2400 3760 5120 Mtl Thkns, Microns Without Mesh (Item 2)

INTERNATIONAL PAINT LTD Type Chartek 1709. Investigated for exterior use.

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

27/04/2010

BYBU.XR625 - Fire Resistance Ratings - ANSI/UL 1709

Page 3 of 3

4. Top Coat One of the following topcoats shall be used. Two component polyurethane topcoat Type Interthane 990 applied at a dry film thickness of 50 microns. Two component polyurethane topcoat Type Interthane 990HS applied at a dry film thickness of 50 microns. Two component polysiloxane topcoat Type Interfine 878 applied at a dry film thickness of 50 microns. Two component polysiloxane topcoat Type Interfine 979 applied at a dry film thickness of 100 microns. *Bearing the UL Classification Mark Last Updated on 2010-04-16 Questions? Print this page Notice of Disclaimer Page Top

Copyright 2010 Underwriters Laboratories Inc. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright 2010 Underwriters Laboratories Inc."

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

27/04/2010

You might also like