Professional Documents
Culture Documents
Substances Listed in EU Directives On Plastics in Contact With Food
Substances Listed in EU Directives On Plastics in Contact With Food
HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL Directorate E Safety of the food chain E3 Chemicals, contaminants, pesticides
This document should be considered as a working document for information only and not as a legal or binding document. If you notice mistakes, please inform Ms. Friedle Vanhee (friedle.vanhee (a)ec.europa.eu).
1 1
2.
3.
4.
5. 6. 7. 8.
2 of 38
ANNEX I
Ref. No CAS No Name (3) Abietic acid Acetaldehyde Acetic acid Acetic acid, vinyl ester Acetic anhydride Acetylene Acids, fatty, unsaturated (C18), dimers, distilled Acids, fatty, unsaturated (C18), dimers, non distilled Acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled Acids, fatty, unsaturated (C18), dimers, hydrogenated, non distilled Acrylamide 2-Acrylamido-2-methylpropanesulphonic acid Acrylic acid Acrylic acid, benzyl ester Acrylic acid, n-butyl ester Acrylic acid, sec-butyl ester Acrylic acid, tert-butyl ester Acrylic acid, dicyclopentenyl ester Acrylic acid, dodecyl ester Acrylic acid, ethyl ester Acrylic acid, 2-ethylhexyl ester Acrylic acid, hydroxyethyl ester Acrylic acid, 2-hydroxypropyl ester (1) (2) MONOMERS 10030 000514-10-3 10060 000075-07-0 10090 000064-19-7 10120 000108-05-4 10150 000108-24-7 10210 000074-86-2 10599/90A 061788-89-4 10599/91 10599/92A 10599/93 10630 10660 10690 10750 10780 10810 10840 11005 11245 11470 11500 11510 11530 061788-89-4 068783-41-5 068783-41-5 000079-06-1 015214-89-8 000079-10-7 002495-35-4 000141-32-2 002998-08-5 001663-39-4 012542-30-2 002156-97-0 000140-88-5 000103-11-7 000818-61-1 000999-61-1 Restrictions and/or specifications (4)
QMA(T) = 0.05 mg/6 dm (27) QMA(T) = 0.05 mg/6 dm (27) QMA(T) = 0.05 mg/6 dm (27) QMA(T) = 0.05 mg/6 dm (27) SML = ND (DL = 0.01 mg/kg) SML = 0.05 mg/kg SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) QMA = 0.05 mg/6 dm SML = 0.05 mg/kg (1) SML(T) = 6 mg/kg (36) SML = 0.05 mg/kg See "Acrylic acid, monoester with ethyleneglycol" QMA = 0.05 mg/6 dm for the sum of acrylic acid, 2hydroxypropyl ester and acrylic acid, 2-hydroxyisoprpyl ester and in compliance with the specifications laid down in Annex V. SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML(T) = 6 mg/kg (36) SML = ND (DL =0.020 mg/kg, analytical tolerance included) QM = 5 mg/kg in FP. For use only as co-monomer.
11590 11680 11710 11830 11890 11980 12100 12130 12265 12280 12310 12340 12375
000106-63-8 000689-12-3 000096-33-3 000818-61-1 002499-59-4 000925-60-0 000107-13-1 000124-04-9 004074-90-2 002035-75-8 -
Acrylic acid, isobutyl ester Acrylic acid, isopropyl ester Acrylic acid, methyl ester Acrylic acid, monoester with ethyleneglycol Acrylic acid, n-octyl ester Acrylic acid, propyl ester Acrylonitrile Adipic acid Adipic acid, divinyl ester Adipic anhydride Albumin Albumin, coagulated by formaldehyde Alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C22)
3 of 38
Restrictions and/or specifications (4) SML = 6 mg/kg SML = 0.05 mg/kg SML = 0.05 mg/kg. Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC and for indirect food contact only, behind the PET layer SML = 0.05 mg/kg Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers and SML = 0,05 mg/kg when used for the surface treatment of materials and articles. SML = 5 mg/kg
12765 12786
084434-12-8 000919-30-2
11-Aminoundecanoic acid Ammonia Azelaic acid Azelaic anhydride 1,3-Benzenedimethanamine 1,3,5-Benzenetricarboxylic acid trichloride
SML = 0.05 mg/kg QMA = 0.05 mg/6 dm measured as 1,3,5-benzenetricarboxylic acid. See "2,4-Diamino-6-phenyl1,3,5-triazine"
1,3-Bis(2-hydroxyethoxy)benzene Bis(2-hydroxyethyl) ether 2,2-Bis(hydroxymethyl)-1-butanol 1,4-Bis(hydroxymethyl)cyclohexane 2,2-Bis(hydroxymethyl)propionic acid 2,2-Bis(4-hydroxyphenyl)propane 2,2-Bis(4-hydroxyphenyl)propane bis(2,3epoxypropyl) ether (=BADGE)
SML = 0.05 mg/kg SML = 0.05 mg/kg SML = 0.05 mg/kg. Purity > 98,1% (w/w). To be used only as co-monomer (max 4%) for polyesters (PET, PBT) SML = 0.05 mg/kg See "Diethyleneglycol" See "1,1,1-Trimethylol propane" QMA = 0.05 mg/6 dm SML(T) = 0.6 mg/kg (28) According to Commission Regulation (EC) No 1895/2005 on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food. SML = 0.05 mg/kg See "Dipropyleneglycol" See "Dicyclohexylmethane-4,4'diisocyanate" SML = 1.8 mg/kg
4 of 38
Name (3)
Restrictions and/or specifications (4) See "2,2-Bis(4hydroxyphenyl)propane" See "2,2-Bis(4hydroxyphenyl)propane bis(2,3epoxypropyl)ether" See "2,2-Bis(4hydroxyphenyl)propane, bis(phthalic anhydride)" See "4,4'-Dihydroxydiphenyl sulphone" SML(T) = 6 mg/kg (23) (expressed as Boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption. QM = 1 mg/kg in FP or SML =ND (DL =0.020 mg/kg, analytical tolerance included) SML(T) = 5 mg/kg (24) QM = 1 mg/kg in FP (expressed as Epoxy group, Mw=43) QMA = 0.05 mg/6 dm
Bisphenol A bis(2,3-epoxypropyl)ether
13614
038103-06-9
13617 13620
000080-09-1 010043-35-3
13630
000106-99-0
Butadiene
1,3-Butanediol 1,4-Butanediol 1,4-Butanediol bis(2,3-epoxypropyl) ether 1,4-Butanediol formal 1-Butanol 1-Butene 2-Butene 3-Buten-2-ol
4-tert-Butylphenol Butyraldehyde Butyric acid Butyric anhydride Caprolactam Caprolactam, sodium salt Caprolactone
QMA = ND (DL = 0.02 mg/6 dm). To be used only as a comonomer for the preparation of polymeric additive SML = 0.05 mg/kg
SML(T) = 15 mg/kg (5) SML(T) = 15 mg/kg (5) (expressed as Caprolactam) SML = 0.05 mg/kg (expressed as the sum of caprolactone and 6hydroxyhexanoic acid)
14320 14350 14380 14411 14500 14530 14570 14650 14680 14710 14740 14770 14800
000124-07-2 000630-08-0 000075-44-5 008001-79-4 009004-34-6 007782-50-5 000106-89-8 000079-38-9 000077-92-9 000108-39-4 000095-48-7 000106-44-5 003724-65-0
Caprylic acid Carbon monoxide Carbonyl chloride Castor oil Cellulose Chlorine 1-Chloro-2,3-epoxypropane Chlorotrifluoroethylene Citric acid m-Cresol o-Cresol p-Cresol Crotonic acid
QM = 1 mg/kg in FP
5 of 38
14950 15030
003173-53-3 000931-88-4
15070 15095 15100 15130 15250 15267 15272 15274 15310 15404
001647-16-1 000334-48-5 000112-30-1 000872-05-9 000110-60-1 000080-08-0 000107-15-3 000124-09-4 000091-76-9 000652-67-5
1,9-Decadiene Decanoic acid 1-Decanol 1-Decene 1,4-Diaminobutane 4,4'-Diaminodiphenyl sulphone 1,2-Diaminoethane 1,6-Diaminohexane 2,4-Diamino-6-phenyl-1,3,5-triazine 1,4:3,6-Dianhydrosorbitol
Restrictions and/or specifications (4) SML = 0.05 mg/kg See "1,4Bis(hydroxymethyl)cyclohexane " QM(T) = 1 mg/kg (expressed as NCO) (26). SML = 0.05 mg/kg. For use only in polymers contacting foods for which simulant A is laid down in Directive 85/572/EEC. SML = 0.05 mg/kg
SML = 0.05 mg/kg SML = 5 mg/kg See "Ethylenediamine" See "Hexamethylenediamine" QMA = 5 mg/6 dm2 SML= 5 mg/kg. Only for use as a co-monomer in poly(ethyleneco-isosorbide terephthalate) SML = 12 mg/kg SML = 0.05 mg/kg QM(T) = 1 mg/kg (expressed as NCO) (26). SML(T) = 30 mg/kg (3) SML = 5 mg/kg SML = 0.05 mg/kg SML = 6 mg/kg SML = 2.4 mg/kg SML = 0.6 mg/kg SML(T) = 6 mg/kg (15) SML = 6 mg/kg SML = 0.05 mg/kg SML = 18 mg/kg SML = 0.05 mg/kg (32). To be used only in polyamides. QM(T) = 1 mg/kg (expressed as NCO) (26). SML = 0.05 mg/kg SML = 0.05 mg/kg SML = 5 mg/kg SML = 0.05 mg/kg QM(T) = 1 mg/kg (expressed as NCO) (26). QM(T) = 1 mg/kg (expressed as NCO) (26). QM(T) = 1 mg/kg (expressed as NCO) (26). SML(T) = 3 mg/kg (25)
15565 15610 15700 15760 15790 15820 15880 15910 15940 15970 16000 16090 16150 16210 16240 16360 16390 16450 16480 16540 16570 16600 16630 16650 16660
000106-46-7 000080-07-9 005124-30-1 000111-46-6 000111-40-0 000345-92-6 000120-80-9 000108-46-3 000123-31-9 000611-99-4 000092-88-6 000080-09-1 000108-01-0 006864-37-5 000091-97-4 000576-26-1 000126-30-7 000646-06-0 000126-58-9 000102-09-0 004128-73-8 005873-54-1 000101-68-8 000127-63-9 000110-98-5
1,4-Dichlorobenzene 4,4'-Dichlorodiphenyl sulphone Dicyclohexylmethane-4,4'-diisocyanate Diethyleneglycol Diethylenetriamine 4,4'-Difluorobenzophenone 1,2-Dihydroxybenzene 1,3-Dihydroxybenzene 1,4-Dihydroxybenzene 4,4'-Dihydroxybenzophenone 4,4'-Dihydroxybiphenyl 4,4'-Dihydroxydiphenyl sulphone Dimethylaminoethanol 3,3'-Dimethyl-4,4'diaminodicyclohexylmethane 3,3'-Dimethyl-4,4'-diisocyanatobiphenyl 2,6-Dimethylphenol 2,2-Dimethyl-1,3 -propanediol 1,3-Dioxolane Dipentaerythritol Diphenyl carbonate Diphenylether-4,4'-diisocyanate Diphenylmethane-2,4'-diisocyanate Diphenylmethane-4,4'-diisocyanate Diphenyl sulphone Dipropyleneglycol
6 of 38
Ref. No (1)
CAS No (2)
Name (3)
16690
001321-74-0
Divinylbenzene
QMA = 0.01 mg/6 dm or SML = ND (DL = 0.02 mg/kg, analytical tolerance included) for the sum of Divinylbenzene and Ethylvinylbenzene and in compliance with the specifications laid down in Annex V QM = 5 mg/kg in FP SML = 0.05 mg/kg QM = 1 mg/kg in FP
17160 17170 17200 17230 17260 17290 17530 18010 18070 18100 18220 18250 18280 18310 18430 18460 18640 18670
000097-53-0 061788-47-4 068308-53-2 061790-12-3 000050-00-0 000110-17-8 000050-99-7 000110-94-1 000108-55-4 000056-81-5 068564-88-5 000115-28-6 000115-27-5 036653-82-4 000116-15-4 000124-09-4 000822-06-0 000100-97-0
Eugenol Fatty acids, coco Fatty acids, soya Fatty acids, tall oil Formaldehyde Fumaric acid Glucose Glutaric acid Glutaric anhydride Glycerol N-Heptylaminoundecanoic acid Hexachloroendomethylenetetrahydrophthalic acid Hexachloroendomethylenetetrahydrophthalic anhydride 1-Hexadecanol Hexafluoropropylene Hexamethylenediamine Hexamethylene diisocyanate Hexamethylenetetramine
Residual content = 5 mg/kg of hydrogel at a maximum ratio of 10 g of hydrogel to 1 kg of food. The hydrolysate contains ethyleneglycol having an SML = 30 mg/kg SML = 12 mg/kg SML(T) = 30 mg/kg (3) SML = ND (DL = 0.01 mg/kg). QM = 1 mg/kg in FP SML = 30 mg/kg QMA = 0.05 mg/6dm. The ratio surface/quantity of food shall be lower than 2 dm/kg SML = ND (DL = 0.02 mg/kg, analytical tolerance included)
SML = 0.05 mg/kg (1) SML = ND (DL = 0.01 mg/kg) SML = ND (DL = 0.01 mg/kg)
SML = ND (DL = 0.01 mg/kg) SML = 2.4 mg/kg QM(T) = 1 mg/kg (expressed as NCO) (26). SML(T) = 15 mg/kg (22)
7 of 38
Ref. No (1) 18700 18820 18867 18880 18896 18897 18898 19000 19060 19110 19150 19180 19210 19243 19270 19460 19470 19480 19490 19510 19540 19960 19975 19990 20020 20050 20080 20110 20140 20170 20260 20410 20440 20530 20590 20890 21010 21100 21130 21190 21280 21340 21370
CAS No (2) 000629-11-8 000592-41-6 000123-31-9 000099-96-7 001679-51-2 016712-64-4 000103-90-2 000115-11-7 000109-53-5 004098-71-9 000121-91-5 000099-63-8 001459-93-4 000078-79-5 000097-65-4 000050-21-5 000143-07-7 002146-71-6 000947-04-6 011132-73-3 000110-16-7 000108-31-6 000108-78-1 000079-39-0 000079-41-4 000096-05-9 002495-37-6 000097-88-1 002998-18-7 000585-07-9 000101-43-9 002082-81-7 000097-90-5 002867-47-2 000106-91-2 000097-63-2 000097-86-9 004655-34-9 000080-62-6 000868-77-9 002177-70-0 002210-28-8 010595-80-9
Name (3) 1,6-Hexanediol 1-Hexene Hydroquinone p-Hydroxybenzoic acid 4-(Hydroxymethyl)-l-cyclohexene 6-Hydroxy-2-naphthalenecarboxylic acid N-(4-Hydroxyphenyl) acetamide Isobutene Isobutyl vinyl ether 1 -Isocyanato-3 -isocyanatomethy1-3,5,5trimethylcyclohexane Isophthalic acid Isophthalic acid dichloride Isophthalic acid, dimethyl ester Isoprene Itaconic acid Lactic acid Lauric acid Lauric acid, vinyl ester Laurolactam Lignocellulose Maleic acid Maleic anhydride Melamine Methacrylamide Methacrylic acid Methacrylic acid, allyl ester Methacrylic acid, benzyl ester Methacrylic acid, butyl ester Methacrylic acid, sec-butyl ester Methacrylic acid, tert-butyl ester Methacrylic acid, cyclohexyl ester Methacrylic acid, diester with 1,4-butanediol Methacrylic acid, diester with ethyleneglycol Methacrylic acid, 2-(dimethylamino)ethyl ester Methacrylic acid, 2,3-epoxypropyl ester Methacrylic acid, ethyl ester Methacrylic acid, isobutyl ester Methacrylic acid, isopropyl ester Methacrylic acid, methyl ester Methacrylic acid, monoester with ethyleneglycol Methacrylic acid, phenyl ester Methacrylic acid, propyl ester Methacrylic acid, 2-sulphoethyl ester
Restrictions and/or specifications (4) (expressed as Formaldehyde) SML = 0.05 mg/kg SML = 3 mg/kg See "1,4-Dihydroxybenzene" SML = 0.05 mg/kg SML = 0.05 mg/kg SML = 0.05 mg/kg QM = 5 mg/kg in FP QM(T) = 1 mg/kg (expressed as NCO) (26). SML(T) = 5 mg/kg (43) SML(T)= 5 mg/kg (43) (expressed as isophthalic acid) SML = 0.05 mg/kg See "2-Methyl-1,3-butadiene"
SML = 5 mg/kg SML(T) = 30 mg/kg (4) SML(T) = 30 mg/kg (4) (expressed as Maleic acid). See "2,4,6-Triamino-1,3,5Triazine" SML = ND (DL =0.02 mg/kg, analytical tolerance included) SML(T) = 6 mg/kg (37) SML = 0.05 mg/kg SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML = 0.05 mg/kg SML = 0.05 mg/kg SML = 0.05 mg/kg SML = ND (DL = 0.02 mg/kg, analytical tolerance included) QMA = 0.02 mg/6 dm2 SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) SML(T) = 6 mg/kg (37) QMA = ND (DL = 0.02 mg/6
8 of 38
Name (3) Methacrylic acid, sulphopropyl ester, potassium salt Methacrylic anhydride Methacrylonitrile Methallylsulphonic acid, sodium salt Methanol 2-Methy1-1,3 -butadiene
Restrictions and/or specifications (4) dm2) QMA = 0.05 mg/6dm2 SML(T) = 6 mg/kg (37) SML = ND (DL = 0.020 mg/kg, analytical tolerance included) SML = 5 mg/kg QM = 1 mg/kg in FP or SML = ND (DL = 0.02 mg/kg, analytical tolerance included) QMA = 0.006 mg/6 dm2. For use only in Polypropylene. QMA = 0.05 mg/6 dm2 See "1,4-Butanediol formal" SML = ND (DL = 0.01 mg/kg) SML = 0,05 mg/kg SML = 0.05 mg/kg SML = 0.05 mg/kg QMA = 5 mg/6 dm2
3-Methyl-1-butene 4,4'-Methylenebis(3-chloro-2,6-diethylaniline) l,4-(Methylenedioxy)butane N-Methylolacrylamide N-Methylolmethacrylamide 4-Methyl-l-pentene alpha-Methylstyrene Mixture of (35-45% w/w) 1,6-diamino-2,2,4trimethylhexane and (55-65% w/w)1,6diamino-2,4,4-trimethylhexane Mixture of (40% w/w) 2,2,4-trimethylhexane1,6-diisocyanate and (60% w/w) 2,4,4trimethylhexane-1,6-diisocyanate Myristic acid 2,6-Naphthalenedicarboxylic acid 2,6-Naphthalenedicarboxylic acid, dimethyl ester 1,5-Naphthalene diisocyanate Neopentylglycol Nitrocellulose 1-Nonanol Norbornene Octadecyl isocyanate 1-Octanol 1-Octene Oleic acid Oxalic acid 4,4'-Oxybis(benzenesulphonyl azide) Palmitic acid Pentaerythritol 1-Pentanol Perfluoromethyl perfluorovinyl ether Perfluoropropyl perfluorovinyl ether Phenol 1,3-Phenylenediamine (1,3-Phenylenedioxy)diacetic acid
22332
22350 22360 22390 22420 22437 22450 22480 22550 22570 22600 22660 22763 22775 22778 22780 22840 22870 22932 22937 22960 23050 23070
000544-63-8 001141-38-4 000840-65-3 003173-72-6 000126-30-7 009004-70-0 000143-08-8 000498-66-8 000112-96-9 000111-87-5 000111-66-0 000112-80-1 000144-62-7 007456-68-0 000057-10-3 000115-77-5 000071-41-0 001187-93-5 001623-05-8 000108-95-2 000108-45-2 000102-39-6
SML = 5 mg/kg SML = 0.05 mg/kg QM(T) = 1 mg/kg (expressed as NCO) (26). See "2,2-Dimethyl-1,3Propanediol"
See "Bicyclo[2.2.1]hept-2-ene" QM(T) = 1 mg/kg (expressed as NCO) (26). SML = 15 mg/kg SML(T) = 6 mg/kg (29) QMA = 0.05 mg/6 dm
SML = 0.05 mg/kg. Only to be used for anti-stick coatings. SML = 0.05 mg/kg SML = ND (DL = 0.02 mg/kg , analytical tolerance included) QMA = 0.05 mg/6dm
9 of 38
Ref. No (1) 23155 23170 23175 23187 23200 23230 23380 23470 23500 23547
CAS No (2) 000075-44-5 007664-38-2 000122-52-1 000088-99-3 000131-17-9 000085-44-9 000080-56-8 000127-91-3 009016-00-6 and 063148-62-9 025322-68-3 025322-69-4 000057-55-6 000504-63-2 000071-23-8 000067-63-0 000123-38-6 000079-09-4 000105-38-4 000123-62-6 000115-07-1 000075-56-9 000120-80-9 000089-32-7 073138-82-6 000108-46-3 000101-90-6
Name (3) Phosgene Phosphoric acid Phosphorous acid, triethyl ester Phthalic acid o-Phthalic acid Phthalic acid, diallyl ester Phthalic anhydride alpha-Pinene beta-Pinene Polydimethylsiloxane (Mw> 6800)
Restrictions and/or specifications (4) See "Carbonyl chloride" QM = ND (DL = 1 mg/kg in FP) See "Terephtahalic acid" SML = ND (DL = 0.01 mg/kg)
23590 23651 23740 23770 23800 23830 23860 23890 23920 23950 23980 24010 24051 24057 24070 24072 24073
Polyethyleneglycol Polypropyleneglycol 1,2-Propanediol 1,3-Propanediol 1-Propanol 2-Propanol Propionaldehyde Propionic acid Propionic acid, vinyl ester Propionic anhydride Propylene Propylene oxide Pyrocatechol Pyromellitic anhydride Resin acids and rosin acids Resorcinol Resorcinol diglycidyl ether
QM = 1 mg/kg in FP See "1,2-Dihydroxybenzene" SML = 0.05 mg/kg (expressed as Pyromellitic acid) See "1,3-Dihydroxybenzene" QMA = 0.005 mg/6 dm - Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC and for indirect food contact only, behind the PET layer. See "Rosin" See Rosin (Reference No 24100)
24100 24130 24160 24190 24250 24270 24280 24430 24475 24490 24520 24540 24550 24610
008050-09-7 008050-09-7 008052-10-6 008050-09-7 009006-04-6 000069-72-7 000111-20-6 002561-88-8 001313-82-2 000050-70-4 008001-22-7 009005-25-8 000057-11-4 000100-42-5
Rosin Rosin gum Rosin tall oil Rosin wood Rubber, natural Salicylic acid Sebacic acid Sebacic anhydride Sodium sulphide Sorbitol Soybean oil Starch, edible Stearic acid Styrene
10 of 38
Name (3) Styrenesulphonic acid Succinic acid Succinic anhydride Sucrose 5-Sulphoisophthalic acid, mono-lithium salt
5-Sulphoisophthalic acid, monosodium salt 5-Sulphoisophthalic acid, monosodium salt, dimethyl ester Syrups, hydrolysed starch, hydrogenated
SML = 5 mg/kg and for lithium SML(T) = 0,6 mg/kg (8) (expressed as lithium) SML = 5 mg/kg SML = 0.05 mg/kg In compliance with the specifications laid down in Annex V SML = 7.5 mg/kg SML(T) = 7.5 mg/kg (as Terephthalic acid)
24910 24940 24970 25080 25090 25120 25150 25180 25210 25240 25270 25360 25380 25385
000100-21-0 000100-20-9 000120-61-6 001120-36-1 000112-60-7 000116-14-3 000109-99-9 000102-60-3 000584-84-9 000091-08-7 026747-90-0 000102-70-5
25420 25450 25510 25540 25550 25600 25840 25900 25910 25927 25960 26050
000108-78-1 026896-48-0 000112-27-6 000528-44-9 000552-30-7 000077-99-6 003290-92-4 000110-88-3 024800-44-0 027955-94-8 000057-13-6 000075-01-4
26110
000075-35-4
Terephthalic acid, dimethyl ester 1-Tetradecene SML = 0.05 mg/kg Tetraethyleneglycol Tetrafluoroethylene SML = 0.05 mg/kg Tetrahydrofuran SML = 0.6 mg/kg N,N,N,'N'-Tetrakis(2-hydroxypropyl)ethylenediamine 2,4-Toluene diisocyanate QM(T) = 1 mg/kg (expressed as NCO) (26). 2,6-Toluene diisocyanate QM(T) = 1 mg/kg (expressed as NCO) (26). 2,4-Toluene diisocyanate dimer QM(T) = 1 mg/kg (expressed as NCO) (26). Trialkyl(C5-C15)acetic acid, 2,3-epoxypropyl QM = 1 mg/kg in FP (expressed ester as Epoxy group, Mw=43) Trialkyl acetic acid (C7-C17), vinyl esters QMA = 0.05 mg/6 dm (=vinyl versatate) Triallylamine In compliance with the specifications laid down in Annex V 2,4,6-Triamino-1,3,5-triazine SML = 30 mg/kg Tricyclodecanedimethanol SML = 0.05 mg/kg Triethyleneglycol Trimellitic acid SML(T) = 5 mg/kg (35) Trimellitic anhydride SML(T) = 5mg/kg (35) (expressed as trimellitic acid) 1,1,1-Trimethylolpropane SML = 6 mg/kg 1,1,1-Trimethylolpropane trimethacrylate SML = 0.05 mg/kg Trioxane SML = 5 mg/kg Tripropyleneglycol 1,1,1-Tris(4-hydroxypheny l)ethane QM = 0.5 mg/kg in FP. For use only in polycarbonates. Urea Vinyl chloride See Council Directive 78/142/EEC QM = 1 mg/kg in FP SML = ND (DL = 0.01 mg/kg) Vinylidene chloride QM = 5 mg/kg in FP or SML = ND (DL = 0.05 mg/kg)
11 of 38
Restrictions and/or specifications (4) SML = 5 mg/kg QM = 5 mg/kg in FP QM = 2 mg/kg in FP SML = 0.05 mg/kg. Only to be used as a surface treatment agent' QM = 5 mg/kg in FP In compliance with the Directive 98/83/EC.
ADDITIVES 30000 000064-19-7 30045 000123-86-4 30080 004180-12-5 30140 30180 30280 30295 30370 30401 30610 000141-78-6 002180-18-9 000108-24-7 000067-64-1 -
Acetic acid Acetic acid, butyl ester Acetic acid, copper salt Acetic acid, ethyl ester Acetic acid, manganese salt Acetic anhydride Acetone Acetylacetic acid, salts Acetylated mono- and diglycerides of fatty acids Acids C2-C24 aliphatic, linear, monocarboxylic from natural oils and fats and their mono-, di- and triglycerol esters (branched fatty acids at naturally occurring levels are included). Acids C2-C24 aliphatic, linear, monocarboxylic, synthetic and their mono-, di- and triglycerol esters Acids, aliph., monocarb. (C6-C22) esters with polyglycerol Acids, fatty from animal or vegetable food fats and oils Acrylic acid, acrylic acid, 2-ethylhexyl ester, copolymer
SML(T) = 5 mg/kg (7) (expressed as Copper) SML(T) = 0.6 mg/kg (10) (expressed as Manganese)
30612
025134-51-4
31520
061167-58-6
31530
123968-25-2
Acrylic acid, 2-tert-butyl-6-(3-tert-butyl-2hydroxy-5-methylbenzyl)-4-methylphenyl ester Acrylic acid, 2,4-di-tert-pentyl-6-[1-(3,5-ditert-pentyl-2-hydroxyphenyl)ethyl]phenyl ester Acrylic acid, methyl ester, telomer with 1dodecanethiol, C16-C18 alkyl esters Adipic acid Adipic acid, bis(2-ethylhexyl) ester Alcohols, aliph, monoh., sat., linear, primary (C4-C24) Alginic acid n-Alkyl(C10-C13)benzenesulphonic acid Alkyl, linear with even number of carbon atoms (C12-C20) dimethylamines
SML(T) = 6 mg/kg (36)(expressed as acrylic acid) and SML = 0.05 mg/kg (expressed as acrylic acid, 2ethylhexyl ester) SML = 6 mg/kg
SML = 5 mg/kg
QM=0.5% (w/w) in FP
12 of 38
CAS No (2) -
Name (3) Alkyl(C8-C22)sulphonic acids Alkyl(C10-C20)sulphonic acid, esters with phenols Alkyl(C8-C22)sulphuric acids, linear, primary, with an even number of carbon atoms Aluminium calcium hydroxide phosphite, hydrate Aluminium fibers, flakes and powders Aluminium hydroxide Aluminium hydroxybis [2,2-methylenebis (4,6-di-tert.butylphenyl) phosphate Aluminium magnesium carbonate hydroxide Aluminium oxide Amines, bis(hydrogenated tallow alkyl) oxidised
Restrictions and/or specifications (4) SML = 6 mg/kg SML = 6 mg/kg. Authorised until 1 January 2002
SML = 5 mg/kg
34895
000088-68-6
2-Aminobenzamide
QM = For use only : (a) in PO at 0.1% (w/w) but not in LDPE when it is in contact with foods for which the Directive 85/572/EEC establishes a RF< 3; (b) in PET at 0.25 % (w/w) in contact with foods other of those for which simulant D is laid down in Directive 85/572/EEC. SML = 0.05 mg/kg. To be used only for PET for water and beverages.
35284
000111-41-1
N-(2-Aminoethyl)ethanolamine
SML = 5 mg/kg SML = 0.05 mg/kg. Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC and for indirect food contact only, behind the PET layer SML = 0.05 mg/kg. Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC and for indirect food contact only, behind the PET layer.
35320 35440 35600 35760 35840 35845 36000 36080 36160 36640 36720
007664-41-7 012124-97-9 001336-21-6 001309-64-4 000506-30-9 007771-44-0 000050-81-7 000137-66-6 010605-09-1 000123-77-3 017194-00-2
Ammonia Ammonium bromide Ammonium hydroxide Antimony trioxide Arachidic acid Arachidonic acid Ascorbic acid Ascorbyl palmitate Ascorbyl stearate Azodicarbonamide Barium hydroxide
Use prohibited as from 2. August 2005. See Directive 2004/1/EC. SML(T) = 1 mg/kg (12) (expressed as Barium)
13 of 38
Restrictions and/or specifications (4) SML(T) = 1 mg/kg (12) (expressed as Barium) SML(T) = 1 mg/kg expressed as Barium (12) and SML(T) = 6 mg/kg (23) (expressed as Boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption (OJ L 330, 5.12.1998, p.32).
36880 36960 37040 37280 37360 37600 37680 37840 38000 38080 38160 38240 38505
008012-89-3 003061-75-4 000112-85-6 001302-78-9 000100-52-7 000065-85-0 000136-60-7 000093-89-0 000553-54-8 000093-58-3 002315-68-6 000119-61-9 351870-33-2
Beeswax Behenamide Behenic acid Bentonite Benzaldehyde Benzoic acid Benzoic acid, butyl ester Benzoic acid, ethyl ester Benzoic acid, lithium salt Benzoic acid, methyl ester Benzoic acid, propyl ester Benzophenone cis-endo-Bicyclo[2.2.1]heptane-2,3dicarboxylic acid, disodium salt 1,2-Bis(3-aminopropyl)ethylenediamine, polymer with N-butyl-2,2,6,6-tetramethyl-4piperidinamine and 2,4,6-trichloro-1,3,5triazine 4,4'-Bis(2-benzoxazolyl)stilbene 2,5-Bis(5-tert-buty l-2-benzoxazoly l)thiophene Bis(2-carbobutoxyethyl)tin-bis(isooctyl mercaptoacetate) N,N'-Bis(3-(3,5-di-tert-butyl-4hydroxyphenyl)propionyl)hydrazide Bis(2,6-di-tert-butyl-4methylphenyl)pentaerythritol diphosphite Bis(2,4-di-tert-butylphenyl) pentaerythritoldiphosphite Bis(2,4-dicumylphenyl)pentaerythritoldiphosphite SML(T) = 0.6 mg/kg (8) (expressed as Lithium) In compliance with note 9 in Annex VI
38510
136504-96-6
SML = 0.6 mg/kg SML = 5 mg/kg. Not to be used with polyethylene in contact with acidic foods. Purity 96 % SML = 5 mg/kg
SML = 0.05 mg/kg (1) SML = 0.6 mg/kg SML = 18 mg/kg SML = 15 mg/kg SML = 5 mg/kg (sum of phosphite and phosphate) SML = 0.6 mg/kg SML = 5 mg/kg (as sum of the substance itself, its oxidised form bis(2,4dicumylphenyl)pentaerythritolphosphate and its hydrolysis product (2,4-dicumylphenol)). SML = 0.05 mg/kg. For use behind a PET layer SML = 0,05 mg/kg. For aqueous foods only. SML(T) = 5 mg/kg (40)
14 of 38
Name (3) Bis(4-ethylbenzylidene)sorbitol 1,1-Bis(2-hydroxy-3,5-di-tertbutylphenyl)ethane N,N-Bis(2-hydroxyethyl)alkyl(C8-C 18)amine N,N-Bis(2-hydroxyethyl)alkyl(C8-C 18)amine hydrochlorides Bis(2-hydroxyethyl)-2-hydroxypropyl-3(dodecyloxy)methylammonium chloride 2,2-Bis(4-hydroxyphenyl)propane
Restrictions and/or specifications (4) SML = 5 mg/kg SML(T) = 1.2 mg/kg (13) SML(T) = 1.2 mg/kg (13) expressed as tertiary amine (expressed excluding HCl) SML = 1.8 mg/kg SML= 0.6 mg/kg (28)
39200 39680
006200-40-4 000080-05-7
39700
001675-54-3
39815 39890
182121-12-6 087826-41-3 and 069158-41-4 and 054686-974/081541-12-0 129228-21-3 000991-84-4 110553-27-0 061269-61-2
According to Commission Regulation (EC) No 1895/2005 of 18 November 2005 on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food. SML= 0.05 mg/kg
40320
010043-35-3
SML = 0.05 mg/kg SML = 30 mg/kg SML(T) = 5 mg/kg (40) SML = 0.6 mg/kg SML = 2.4 mg/kg
SML(T) = 6 mg/kg (23) (expressed as Boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption.
40400 40570 40580 40720 40800 40980 41040 41120 41280 41520 41600
010043-11-5 000106-97-8 000110-63-4 025013-16-5 013003-12-8 019664-95-0 005743-36-2 010043-52-4 001305-62-0 001305-78-8 012004-14-7 and
Boron nitride Butane 1,4-Butanediol tert-Butyl-4-hydroxyanisole (=BHA) 4,4'-Butylidene-bis(6-tert-butyl-3methylphenyl-ditridecyl phosphite) Butyric acid, manganese salt Calcium butyrate Calcium chloride Calcium hydroxide Calcium oxide Calcium sulphoaluminate
SML(T) = 5 mg/kg (24) SML = 30 mg/kg SML = 6 mg/kg SML(T) = 0.6 mg/kg (10) (expressed as Manganese)
15 of 38
CAS No (2) 037293-22-4 000076-22-2 008006-44-8 000105-60-2 000124-07-2 063438-80-2 001333-86-4 Camphor
Name (3)
Restrictions and/or specifications (4) In compliance with note 9 in Annex VI SML(T) = 15 mg/kg (5) SML = 30 mg/kg In compliance with the specifications laid down in Annex V. SML(T) = 5 mg/kg (7) (expressed as Copper) SML(T) = 0.6 mg/kg (8) (expressed as Lithium) SML = 12 mg/kg
42160 42320
000124-38-9 007492-68-4
42400 42480 42500 42640 42720 42800 42880 42960 43200 43280 43300 43360 43440 43480
010377-37-4 000584-09-8 009000-11-7 008015-86-9 009000-71-9 008001-79-4 064147-40-6 009004-34-6 009004-36-8 068442-85-3 008001-75-0 064365-11-3
Carbonic acid, lithium salt Carbonic acid, rubidium salt Carbonic acid, salts Carboxymethylcellulose Carnauba wax Casein Castor oil Castor oil, dehydrated Castor oil, mono- and diglycerides Cellulose Cellulose acetate butyrate Cellulose, regenerated Ceresin Charcoal, activated
004080-31-3 000075-45-6
Chlorides of choline esters of coconut oil fatty acids 1-(3-Chloroallyl)-3,5,7-triaza-1azoniaadamantane chloride Chlorodifluoromethane
In compliance with the specifications laid down in Annex V. QMA = 0.9 mg/6 dm SML = 0.3 mg/kg SML = 6 mg/kg and in compliance with the specifications laid down in Annex V.
Citric acid Citric acid, triethyl ester Cobalt oxide Copper bromide Copper iodide
SML(T) = 0.05 mg/kg (14) (expressed as Cobalt) SML(T) = 5 mg/kg (7) (expressed as Copper) SML(T) = 5 mg/kg (7) (expressed as copper) and SML = 1 mg/kg (11) (expressed as iodine) SML = 12 mg/kg SML = 5 mg/kg
068610-51-5
16 of 38
Ref. No (1) 45560 45600 45640 45650 45703 45705 45760 45920 45940 46070 46080 46375 46380 46480 46640 46700
CAS No (2) 014464-46-1 003724-65-0 005232-99-5 006197-30-4 491589-22-1 166412-78-8 000108-91-8 009000-16-2 000334-48-5 010016-20-3 007585-39-9 061790-53-2 068855-54-9 032647-67-9 000128-37-0 -
Name (3) copolymer Cristobalite Crotonic acid 2-Cyano-3,3-diphenylacrylic acid, ethyl ester 2-Cyano-3,3-diphenylacrylic acid, 2ethylhexyl ester cis-1,2-Cyclohexanedicarboxylic acid, calcium salt 1,2-cyclohexanedicarboxylic acid, diisononyl ester Cyclohexylamine Dammar n-Decanoic acid alpha-Dextrin beta-Dextrin Diatomaceous earth Diatomaceous earth, soda ash flux-calcined Dibenzylidene sorbitol 2,6-Di-tert-butyl-p-cresol (=BHT) 5,7-di-tert-Butyl-3-(3,4- and 2,3dimethylphenyl)-3H-benzofuran-2-one containing: a) 5,7-di-tert-butyl-3-(3,4dimethylphenyl)-3H-benzofuran-2-one (80 to 100% w/w) and b) 5,7-di-tert-butyl-3-(2,3dimethylphenyl)-3H-benzofuran-2-one (0 to 20% w/w) 2,6-Di-tert-butyl-4-ethylphenol 3,5-Di-tert-butyl-4-hydroxybenzoic acid, 2,4di-tert-butylphenyl ester 3,5-Di-tert-butyl-4-hydroxybenzoic acid, hexadecyl ester 3,5-Di-tert-butyl-4-hydroxybenzylphosphonic acid, dioctadecyl ester 3,5-Di-tert-butyl-4-hydroxybenzylphosphonic acid, monoethyl ester, calcium salt Dibutylthiostannoic acid polymer [= thiobis(butyl-tin sulphide), polymer] Dicyanodiamide N,N'-Dicyclohexyl-2,6-naphthalene dicarboxamide Di-tert-dodecyl disulphide Di-n-dodecyltin bis(isooctyl mercaptoacetate)
QMA(T) = 0.05 mg/6dm2 (33) SML = 0.05 mg/kg SML = 0.05 mg/kg SML= 5 mg/kg
SML = 6 mg/kg in compliance with the specifications laid down in Annex V. SML = 5 mg/kg. SML = 0.05 mg/kg SML(T) = 0,05 mg/kg food (41) (as sum of mono-n-dodecyltin tris(isooctyl mercaptoacetate), di-n- dodecyltin bis(isooctyl mercaptoacetate), monododecyltin trichloride and didodecyltin dichloride) expressed as the sum of mono- and didodecyltin chloride SML(T) = 30 mg/kg (3) SML = 0.6 mg/kg SML(T) = 6 mg/kg (15)
17 of 38
Ref. No (1) 48720 48800 48880 48960 49485 49540 49595 49600 49840 50160 50240 50320 50360
CAS No (2) 000611-99-4 000097-23-4 000131-53-3 --134701-20-5 000067-68-5 057583-35-4 026636-01-1 002500-88-1 010039-33-5 015571-58-1 -
Name (3) 4,4'-Dihydroxybenzophenone 2,2'-Dihydroxy-5,5'-dichlorodiphenylmethane 2,2'-Dihydroxy-4-methoxybenzophenone 9,10-dihydroxy stearic acid and its oligomers 2,4-Dimethyl-6-(1-methylpentadecyl)-phenol Dimethyl sulphoxide Dimethyltin bis(ethylhexyl mercaptoacetate) Dimethyltin bis(isooctyl mercaptoacetate) Dioctadecyl disulphide Di-n-octyltin bis(n-alkyl(C10-C16) mercaptoacetate) Di-n-octyltin bis(2-ethylhexyl maleate) Di-n-octyltin bis(2-ethylhexyl mercaptoacetate) Di-n-octyltin bis(ethyl maleate)
Restrictions and/or specifications (4) SML(T) = 6 mg/kg (15) SML = 12 mg/kg SML(T) = 6 mg/kg (15) SML= 5 mg/kg SML = 1 mg/kg SML(T) = 0.18 mg/kg (16) (expressed as Tin) SML(T) = 0.18 mg/kg (16) (expressed as Tin) SML = 3 mg/kg SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 0.006 mg/kg (17) (expressed as Tin) SML(T) = 3 mg/kg (25) SML = 3 mg/kg SML = 0.05 mg/kg
Di-n-octyltin bis(isooctyl maleate) Di-n-octyltin bis(isooctyl mercaptoacetate) Di-n-octyltin 1,4-butanediol bis(mercaptoacetate) Di-n-octyltin dilaurate Di-n-octyltin dimaleate Di-n-octyltin dimaleate, esterified Di-n-octyltin dimaleate, polymers (n=2-4) Di-n-octyltin ethyleneglycol bis(mercaptoacetate) Di-n-octyltin mercaptoacetate Di-n-octyltin thiobenzoate 2-ethylhexyl mercaptoacetate Dipentaerythritol Diphenyl sulphone N,N'-Diphenylthiourea 2-(4,6-Diphenyl-1,3,5-triazin-2-yl)-5(hexyloxy)phenol Dipropyleneglycol Dodecylbenzenesulphonic acid 2-(4-Dodecylphenyl)indole Dolomite cis-11-Eicosenamide Erucamide Erucic acid
51040 51120 51200 51570 51680 51700 51760 52000 52320 52640 52645 52720 52730
015535-79-2 000126-58-9 000127-63-9 000102-08-9 147315-50-2 025265-71-8 and 000110-98-5 027176-87-0 052047-59-3 016389-88-1 010436-08-5 000112-84-5 000112-86-7
18 of 38
Ref. No (1) 52800 52880 53200 53270 53280 53360 53440 53520 53600 53610 53650 53670 54005 54260 54270 54280 54300
CAS No (2) 000064-17-5 023676-09-7 023949-66-8 037205-99-5 009004-57-3 000110-31-6 005518-18-3 000110-30-5 000060-00-4 054453-03-1 000107-21-1 032509-66-3 005136-44-7 009004-58-4 118337-09-0
Name (3) Ethanol 4-Ethoxybenzoic acid, ethyl ester 2-Ethoxy-2'-ethyloxanilide Ethylcarboxymethylcellulose Ethylcellulose N,N'-Ethylenebisoleamide N,N'-Ethylenebispalmitamide N,N'-Ethylenebisstearamide Ethylenediaminetetraacetic acid Ethylenediaminetetraacetic acid, copper salt Ethyleneglycol Ethylene glycol bis[3,3-bis(3-tert-butyl-4hydroxyphenyl)butyrate] Ethylene-N-palmitamide-N'-stearamide Ethylhydroxyethylcellulose Ethylhydroxymethylcellulose Ethylhydroxypropylcellulose 2,2'-Ethylidenebis(4,6-di-tert-butyl phenyl) fluorophosphonite Fats and oils, from animal or vegetable food sources Fats and oils, hydrogenated, from animal or vegetable food sources Formaldehyde Formaldehyde-1-naphthol copolymer [=poly(1-hydroxynaphthylmethane)] Formic acid Fumaric acid Gadoleic acid Gallic acid, dodecyl ester Gallic acid, octyl ester Gallic acid, propyl ester Gelatin Glass fibers Glass microballs Glutaric acid Glycerides, castor-oil mono-, hydrogenated, acetates Glycerol Glycerol dibehenate Glycerol esters with acetic acid Glycerol, esters with acids, aliph.,sat., linear with an even number of carbon atoms (C14C18) and with acids aliph., unsat., linear, with an even number of carbon atoms (C16-C18) Glycerol esters with butyric acid Glycerol, esters with erucic acid Glycerol esters with 12-hydroxystearic acid Glycerol, esters with lauric acid Glycerol, esters with linoleic acid
SML(T) = 5 mg/kg (7) (expressed as Copper) SML(T) = 30 mg/kg (3) SML= 6 mg/kg'
SML = 6 mg/kg
54450 54480 54880 54930 55040 55120 55190 55200 55280 55360 55440 55520 55600 55680 55910 55920 56020 56360 56486
000050-00-0 025359-91-5 000064-18-6 000110-17-8 029204-02-2 001166-52-5 001034-01-1 000121-79-9 009000-70-8 000110-94-1 736150-63-3 000056-81-5 099880-64-5 -
19 of 38
Ref. No (1) 56520 56535 56540 56550 56570 56580 56585 56610 56720 56800 56880 57040 57120 57200 57280 57600 57680 57800 57920 58300 58320 58400 58480 58720 58960 59120 59200 59280 59360 59760 59990 60025
CAS No (2) 030233-64-8 026402-23-3 030899-62-8 026402-26-6 018641-57-1 000620-67-7 007782-42-5 009000-30-0 009000-01-5 000111-14-8 000057-09-0 023128-74-7 035074-77-2 000100-97-0 000142-62-1 019569-21-2 007647-01-0 ---
Name (3) Glycerol, esters with myristic acid Glycerol, esters with nonanoic acid Glycerol, esters with oleic acid Glycerol, esters with palmitic acid Glycerol, esters with propionic acid Glycerol, esters with ricinoleic acid Glycerol, esters with stearic acid Glycerol monobehenate Glycerol monohexanoate Glycerol monolaurate diacetate Glycerol monooctanoate Glycerol monooleate, ester with ascorbic acid Glycerol monooleate, ester with citric acid Glycerol monopalmitate, ester with ascorbic acid Glycerol monopalmitate, ester with citric acid Glycerol monostearate, ester with ascorbic acid Glycerol monostearate, ester with citric acid Glycerol tribehenate Glycerol triheptanoate Glycine, salts Graphite Guar gum Gum arabic Heptanoic acid Hexadecyltrimethylammonium bromide l,6-Hexamethylene-bis(3-(3,5-di-tert-butyl-4hydroxyphenyl)propionamide) l,6-Hexamethylene-bis(3-(3,5-di-tert-butyl~4hydroxyphenyl)propionate) Hexamethylenetetramine Hexanoic acid Huntite Hydrochloric acid Hydrogenated homopolymers and/or copolymers made of 1-decene and/or 1dodecene and/or 1-octene Hydromagnesite Hydrotalcite 4-Hydroxybenzoic acid, ethyl ester 4-Hydroxybenzoic acid, isopropyl ester 4-Hydroxybenzoic acid, methyl ester 4-Hydroxybenzoic acid, propyl ester 2-[2-Hydroxy-3,5-bis(l,ldimethylbenzyl)phenyl]benzotriazole 2-(2'-Hydroxy-3'-tert-butyl-5'-methylphenyl)5-chlorobenzotriazole 2-(2'-Hydroxy-3,5'-di-tert-butylphenyl)-5chlorobenzotriazole
SML = 6 mg/kg SML = 45 mg/kg SML = 6 mg/kg SML(T) = 15 mg/kg (22) (35)(expressed as Formaldehyde)
In compliance with the specifications laid down in Annex V. Not to be used for articles in contact with fatty foods.
20 of 38
60800
065447-77-0
60880 61120 61280 61360 61390 61440 61600 61680 61800 61840 62020 62140 62240 62245 62280 62450 62640 62720 62800 62960 63040 63200 63280 63760 63840 63920 63940
009032-42-2 009005-27-0 003293-97-8 000131-57-7 037353-59-6 002440-22-4 001843-05-6 009004-64-2 009049-76-7 000106-14-9 007620-77-1 006303-21-5 001332-37-2 012751-22-3 009044-17-1 000078-78-4 008001-39-6 001332-58-7 000050-21-5 000138-22-7 051877-53-3 000143-07-7 008002-43-5 000123-76-2 000557-59-5 008062-15-5
1-(2-Hydroxyethyl)-4-hydroxy-2,2,6,6tetramethyl piperidine-succinic acid, dimethyl ester, copolymer Hydroxyethylmethylcellulose Hydroxyethyl starch 2-Hydroxy-4-n-hexyloxybenzophenone 2-Hydroxy-4-methoxybenzophenone Hydroxymethylcellulose 2-(2'-Hydroxy-5'-methylphenyl)benzotriazole 2-Hydroxy-4-n-octyloxybenzophenone Hydroxypropylcellulose Hydroxypropyl starch 12-Hydroxystearic acid 12-Hydroxystearic acid, lithium salt Hypophosphorous acid Iron oxide Iron phosphide Isobutylene-butene copolymer Isopentane Japan wax Kaolin Kaolin, calcined Lactic acid Lactic acid, butyl ester Lactic acid, manganese salt Lauric acid Lecithin Levulinic acid Lignoceric acid Lignosulphonic acid
SML = 30 mg/kg
SML(T) = 6 mg/kg (15) SML(T) = 6 mg/kg (15) SML(T) = 30 mg/kg (19) SML(T) = 6 mg/kg (15)
SML= 0.24 mg/kg and to be used only as dispersant for plastics dispersions
SML(T) = 1 mg/kg (11) (expressed as Iodine) and SML(T) = 0.6 mg/kg (8) (expressed as Lithium)
Lysine, salts Magnesium hydroxide Magnesium oxide Maleic acid Maleic anhydride-styrene, copolymer, sodium salt Malic acid
65020
006915-15-7
21 of 38
Ref. No (1) 65040 65120 65200 65280 65360 65440 65520 65920
Name (3) Malonic acid Manganese chloride Manganese hydroxide Manganese hypophosphite Manganese oxide Manganese pyrophosphite Mannitol [N-Methacryloyloxyethyl-N,N-dimethyl-Ncarboxymethylammonium chloride, sodium salt -octadecyl methacrylate-ethyl methacrylate-cyclohexyl methacrylate-Nvinyl-2-pyrrolidone, copolymers Methylcarboxymethylcellulose Methylcellulose 2,2'-Methylenebis(4,6-di-tert-butylphenyl) lithium phosphate 2,2'-Methylene bis(4,6-di-tert-butylphenyl) sodium phosphate 2,2'-Methylene bis(4-ethyl-6-tert-butylphenol) 2,2'-Methylene bis(4-methyl-6-tertbutylphenol) 2,2'-Methylenebis(4-methyl-6cyclohexylphenol) 2,2'-Methylenebis(4-methyl-6-(1-methylcyclohexyl) phenol) Methylethylcellulose Methylhydroxymethylcellulose Methylhydroxypropylcellulose 2-Methyl-4-isothiazolin-3-one
Restrictions and/or specifications (4) SML(T) = 0.6 mg/kg (10) (expressed as Manganese) SML(T) = 0.6 mg/kg (10) (expressed as Manganese) SML(T) = 0.6 mg/kg (10) (expressed as Manganese) SML(T) = 0.6 mg/kg (10) (expressed as Manganese) SML(T) = 0.6 mg/kg (10) (expressed as Manganese)
66200 66240 66350 66360 66400 66480 66560 66580 66640 66695 66700 66755
037206-01-2 009004-67-5 085209-93-4 085209-91-2 000088-24-4 000119-47-1 004066-02-8 000077-62-3 009004-59-5 009004-65-3 002682-20-4
SML = 5 mg/kg and SML(T)= 0.6 (8) (expressed as Lithium) SML = 5 mg/kg SML(T) = 1.5 mg/kg (20) SML(T) = 1.5 mg/kg (20) SML(T) = 3 mg/kg (6) SML(T) = 3 mg/kg (6)
SML= 0.5 mg/kg. Only to be used in aqueous polymer dispersions and emulsions and at concentrations which do not result in an anti-microbial effect at the surface of the polymer or on the food itself. Residual monomer in methylsilsesquioxane:< 1mg methyltrimethoxysilane / kg of methylsilsesquioxane
66905 66930
000872-50-4 068554-70-1
N-Methylpyrrolidone Methylsilsesquioxane
67120
012001-26-2
Mica
67155
Not more than 0.05% w/w (quantity of substance used/quantity of the formulation). In compliance with the specifications laid down in annex V
22 of 38
CAS No (2) -
Name (3) Mixture of (80 to 100% w/w) 5,7-di-tertbutyl-3-(3,4-dimethylphenyl)-2(3H)benzofuranone and (0 to 20% w/w)5,7-di-tertbutyl-3-(2,3-dimethylphenyl)-2(3H)benzofuranone Mixture of (50 % w/w) phthalic acid n-decyl n-octyl ester, (25 % w/w) phthalic acid di-ndecyl ester, (25 % w/w) phthalic acid di-noctyl ester. Molybdenum disulphide Mono-n-dodecyltin tris(isooctyl mercaptoacetate)
67180
67200 67360
001317-33-5 067649-65-4
Monomethyltin tris(ethylhexyl mercaptoacetate) Monomethyltin tris(isooctyl mercaptoacetate) Mono-n-octyltin tris(alkyl(C10-C16) mercaptoacetate) Mono-n-octyltin tris(2-ethylhexyl mercaptoacetate) Mono-n-octyltin tris(isooctyl mercaptoacetate) Montanic acids and/or their esters with ethyleneglycol and/or with 1,3-butanediol and/or with glycerol Montan wax Myristic acid Myristic acid, lithium salt 7-(2H-Naphtho-( 1,2-D)triazol-2-yl)-3phenylcoumarin
SML(T) = 0,05 mg/kg food (41) (as sum of mono-n-dodecyltin tris(isooctyl mercaptoacetate), di-n- dodecyltin bis(isooctyl mercaptoacetate), monododecyltin trichloride and didodecyltin dichloride) expressed as the sum of mono- and didodecyltin chloride SML(T) = 0.18 mg/kg (16) (expressed as Tin) SML(T) = 0.18 mg/kg (16) (expressed as Tin) SML(T) = 1.2 mg/kg (18) (expressed as Tin) SML(T) = 1.2 mg/kg (18) (expressed as Tin) SML(T) = 1.2 mg/kg (18) (expressed as Tin)
68078
027253-31-2
SML(T) = 0.05 mg/kg (expressed as Neodecanoic acid) and SML(T) = 0.05 mg/kg (14) (expressed as Cobalt). Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC. SML = 5 mg/kg (sum of phosphite and phosphate) SML = 6 mg/kg SML = 5 mg/kg SML = 0.05 mg/kg
Nepheline syenite 2,2',2"-Nitrilo[triethyl tris(3,3',5,5'-tetra-tertbutyl-1,1'-bi-phenyl-2,2'-diyl)phosphite] Octadecyl 3-(3,5-di-tert-butyl-4hydroxyphenyl)propionate Octadecylerucamide n-Octylphosphonic acid Oleamide Oleic acid
23 of 38
Ref. No (1) 69160 69760 69840 69920 Ref. No (1) 70000 70240 70400 70480 71020 71440 71600 71635
CAS No (2) 014666-94-5 000143-28-2 016260-09-6 000144-62-7 CAS No (2) 070331-94-1 012198-93-5 000057-10-3 000111-06-8 000373-49-9 009000-69-5 000115-77-5 025151-96-6
Name (3) Oleic acid, cobalt salt Oleyl alcohol Oleylpalmitamide Oxalic acid Name (3) 2,2'-Oxamidobis[ethyl-3-(3,5-di-tert-butyl-4hydroxyphenyl)propionate] Ozokerite Palmitic acid Palmitic acid, butyl ester Palmitoleic acid Pectin Pentaerythritol Pentaerythritol dioleate
Restrictions and/or specifications (4) SML(T) = 0.05 mg/kg (14) (expressed as Cobalt). SML = 5 mg/kg SML(T) = 6 mg/kg (29) Restrictions and/or specifications (4)
Pentaerythritol tetrakis (2-cyano-3,3diphenylacrylate) Pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4hydroxyphenyl)-propionate] Pentane Perchloric acid, sodium salt monohydrate Perfluorooctanoic acid, ammonium salt
SML = 0.05 mg/kg. Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC. SML = 0.05 mg/kg
72081/10
2-Phenylindole Phosphoric acid Phosphoric acid, diphenyl 2-ethylhexyl ester Phosphoric acid, lithium salts
SML = 0.05 mg/kg (31) Only to be used in repeated use articles, sintered at high temperatures. In compliance with the specifications laid down in Annex V.' SML = 15 mg/kg SML = 2.4 mg/kg SML(T) = 0.6 mg/kg (8) (expressed as Lithium)
Phosphoric acid, manganese salt Phosphoric acid, mono- and di-n-alkyl (C16 and C18) esters Phosphoric acid, trichloroethyl ester Phosphorous acid, bis(2,4-di-tert.-butyl-6methylphenyl) ethyl ester Phosphorous acid, tris(2,4-di-tert-butylphenyl) ester Phosphorous acid, tris(nonyl-and/or dinonylphenyl) ester o-Phthalic acid
SML(T) = 0.6 mg/kg (10) (expressed as Manganese) SML = 0.05 mg/kg SML = ND (DL = 0.02 mg/kg, analytical tolerance included) SML = 5 mg/kg (sum of phosphite and phosphate)
SML = 30 mg/kg
24 of 38
74640
000117-81-7
74880
000084-74-2
75100
068515-48-0 028553-12-0
Phthalic acid, diesters with primary, saturated C8-C10 branched alcohols, more than 60 % C9.
75105
068515-49-1 026761-40-0
Phthalic acid, diesters with primary, saturated C9-C11 alcohols more than 90 % C10
Restrictions and/or specifications (4) To be used only as:(a) plasticizer in repeated use materials and articles; (b) plasticizer in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 91/321/EEC and products according to Directive 96/5/EC; (c) technical support agent in concentrations up to 0,1 % in the final product. SML = 30 mg/kg food simulant. To be used only as: (a) plasticizer in repeated use materials and articles contacting non-fatty foods; (b) technical support agent in concentrations up to 0,1 % in the final product. SML = 1,5 mg/kg food simulant. To be used only as:(a) plasticizer in repeated use materials and articles contacting non-fatty foods; (b) technical support agent in poly-olefines in concentrations up to 0,05 % in the final product. SML = 0,3 mg/kg food simulant. To be used only as:(a) plasticizer in repeated use materials and articles; (b) plasticizer in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 91/321/EEC and products according to Directive 96/5/EC; (c) technical support agent in concentrations up to 0,1 % in the final product. SML(T) = 9 mg/kg food simulant (42). To be used only as: (a) plasticizer in repeated use materials and articles; (b) plasticizer in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 91/321/EEC and products according to Directive 96/5/EC; (c) technical support agent in concentrations up to 0,1 % in the final product. SML(T) = 9 mg/kg food simulant (42).
25 of 38
76723
76725
661476-41-1
76730 76815
76845
031831-53-5
Polydimethylsiloxane, 3-aminopropyl terminated, polymer with dicyclohexylmethane- 4,4-diisocyanate Polydimethylsiloxane, 3-aminopropyl terminated, polymer with 1-isocyanato-3isocyanatomethyl-3,5,5-trimethylcyclohexane Polydimethylsiloxane, gammahydroxypropylated Polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acids Polyester of 1,4-butanediol with caprolactone
In compliance with the specifications laid down in Annex V. In compliance with the specifications laid down in Annex V In compliance with the specifications laid down in Annex V SML = 6 mg/kg In compliance with the specifications laid down in Annex V The restriction for Ref. No 14260 and Ref. No 13720 shall be respected. In compliance with the specifications laid down in Annex V. SML = 30 mg/kg
76866
77732
---
77733
---
77895
068439-49-6
Polyesters of 1,2-propanediol and/or 1,3and/or 1,4-butanediol and/or polypropyleneglycol with adipic acid, also end-capped with acetic acid or fatty acids C12-C18 or n-octanol and/or n-decanol Polyethyleneglycol Polyethyleneglycol-30 dipolyhydroxy stearate Polyethyleneglycol diricinoleate Polyethyleneglycol ester of castor oil Polyethyleneglycol ester of hydrogenated castor oil Polyethyleneglycol esters of aliph. monocarb. acids (C6-C22) and their ammonium and sodium sulphates Polyethylene glycol (EO=1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3methoxyphenyl) acrylate Polyethyleneglycol (EO=1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylate Polyethyleneglycol (EO=2-6)monoalkyl(C16C18) ether
SML= 0.05 mg/kg. Only for use in PET. SML= 0.05 mg/kg. Only for use in PET. SML = 0.05 mg/kg and in compliance with the specifications laid down in Annex V SML= 5 mg/kg
77897
---
Polyethyleneglycol (EO =1-50) monoalkylether (linear and branched, C8C20) sulphate, salts Polyethyleneglycol monoricinoleate Polyethyleneglycol sorbitan monolaurate Polyethyleneglycol sorbitan monooleate Polyethyleneglycol sorbitan monopalmitate Polyethyleneglycol sorbitan monostearate Polyethyleneglycol sorbitan trioleate Polyethyleneglycol sorbitan tristearate
SML = 42 mg/kg
26 of 38
Restrictions and/or specifications (4) SML = 5 mg/kg. For materials and articles intended for contact with aqueous foods only. In compliance with the specification laid down in Annex V.
Poly(ethylene propylene) glycol Polyethylene wax Polyglycerol ricinoleate Polyoxyalkyl(C2-C4)dimethylpolysiloxane Polyphosphoric acids Polypropyleneglycol Polypropylene wax Poly[6-[(1,1,3,3-tetramethylbutyl)amino] 1,3,5-triazine-2,4-diyl]-[(2,2,6,6-tetramethyl4-piperidyl)-imino]hexamethylene[(2,2,6,6tetramethyl-4-piperidyl)imino]
SML = 3 mg/kg
81220
192268-64-7
SML = 5 mg/kg
81500
9003-39-8
Poly(zinc glycerolate) Potassium bromide Potassium hydroxide Potassium iodide Powders, flakes and fibres of brass, bronze, copper, stainless steel, tin and alloys of copper, tin and iron 1,2-Propanediol 2-Propanol Propionic acid Propionic acid, cobalt salt 1.2-Propyleneglycol alginate 1,2-Propyleneglycol dilaurate 1,2-Propyleneglycol dioleate 1,2-Propyleneglycol dipalmitate
In compliance with the specifications laid down in Annex V. SML(T) = 25 mg/kg (38) (as Zinc)
SML(T) = 1 mg/kg (11) (expressed as Iodium) SML(T) = 5 mg/kg (7) (expressed as copper); SML = 48 mg/kg (expressed as iron)
27 of 38
Ref. No (1) 82720 82800 82960 83120 83300 83320 83325 83330 83440 83455 83460 83470 83595
CAS No (2) 006182-11-2 027194-74-7 001330-80-9 029013-28-3 001323-39-3 002466-09-3 013445-56-2 012269-78-2 014808-60-7 119345-01-6
Name (3) 1,2-Propyleneglycol distearate 1,2-Propyleneglycol monolaurate 1,2-Propyleneglycol monooleate 1,2-Propyleneglycol monopalmitate 1,2-Propyleneglycol monostearate Propylhydroxyethylcellulose Propylhydroxymethylcellulose Propylhydroxypropylcellulose Pyrophosphoric acid Pyrophosphorous acid Pyrophyllite Quartz Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft reaction product of phosphorus trichloride and biphenyl Reaction products of oleic acid, 2mercaptoethyl ester, with dichlorodimethyltin, sodium sulphide and trichloromethyltin Resin acids and rosin acids Ricinoleic acid Rosin Rosin, ester with glycerol Rosin, ester with pentaerythritol Rosin, hydrogenated Rosin, hydrogenated, ester with glycerol Rosin, hydrogenated, ester with methanol Rosin, hydrogenated, ester with pentaerythritol Rubber, natural Salicylic acid Salicylic acid, 4-tert-butylphenyl ester Salicylic acid, methyl ester Sebacic acid, dibutyl ester Silicates, natural (with the exception of asbestos) Silicates, natural, silanated (with the exception of asbestos) Silicic acid Silicic acid, lithium aluminium salt(2:1:1) Silicic acid, lithium magnesium sodium salt Silicic acid, lithium salt Silicic acid, magnesium-sodium-fluoride salt
SML = 18 mg/kg and in compliance with the specifications mentioned in Annex V. SML(T) = 0.18 mg/kg (16) (expressed as Tin)
83599
068442-12-6
83610 83700 83840 84000 84080 84210 84240 84320 84400 84560 84640 84800 84880 85360 85601 85610 85680 85760 85840 85920 85950
073138-82-6 000141-22-0 008050-09-7 008050-31-5 008050-26-8 065997-06-0 065997-13-9 008050-15-5 064365-17-9 009006-04-6 000069-72-7 000087-18-3 000119-36-8 000109-43-3 001343-98-2 012068-40-5 053320-86-8 012627-14-4 037296-97-2
SML = 42 mg/kg
SML(T) = 0.6 mg/kg (8) (expressed as Lithium) SML(T) = 0.6 mg/kg (8) (expressed as Lithium) SML(T) = 0.6 mg/kg (8) (expressed as Lithium) SML = 0.15 mg/kg (expressed as fluoride). Only to be used in layers of multilayers materials not coming into direct contact with food
86000 86160
000409-21-2
28 of 38
Ref. No (1) 86240 86285 86480 86560 86720 86800 86880 86920 86960 87040
CAS No (2) 007631-86-9 007631-90-5 007647-15-6 001310-73-2 007681-82-5 007632-00-0 007757-83-7 001330-43-4
Name (3) Silicon dioxide Silicon dioxide, silanated Sodium bisulphite Sodium bromide Sodium hydroxide Sodium iodide Sodium monoalkyl dialkylphenoxybenzenedisulphonate Sodium nitrite Sodium sulphite Sodium tetraborate
SML(T) = 1 mg/kg (11) (expressed as Iodine) SML = 9 mg/kg SML = 0.6 mg/kg SML(T) = 10 mg/kg (30) (expressed as SO2) SML(T) = 6 mg/kg (23) (expressed as Boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption (OJ L 330, 5.12.1998,p.32) SML(T) = 10 mg/kg (30) (expressed as SO2)
87120 87200 87280 87520 87600 87680 87760 87840 87920 88080 88160 88240 88320 88600 88640
007772-98-7 000110-44-1 029116-98-1 062568-11-0 001338-39-2 001338-43-8 026266-57-9 001338-41-6 061752-68-9 026266-58-0 054140-20-4 026658-19-5 000050-70-4 026836-47-5 008013-07-8
Sodium thiosulphate sorbic acid Sorbitan dioleate Sorbitan monobehenate Sorbitan monolaurate Sorbitan monooleate Sorbitan monopalmitate Sorbitan monostearate Sorbitan tetrastearate Sorbitan trioleate Sorbitan tripalmitate Sorbitan tristearate Sorbitol Sorbitol monostearate Soybean oil, epoxidised
SML = 60 mg/kg. However in the case of PVC gaskets used to seal glass jars containing infant formulae and follow-on formulae as defined by Directive 91/321/EEC or containing processed cereal-based foods and baby foods for infants and young children as defined by Directive 96/5/EC, the SML is lowered to 30 mg/kg. In compliance with the specifications laid down in Annex V.
Starch, edible Starch, hydrolysed Stearamide Stearic acid Stearic acid, butyl ester Stearic acid, cobalt salt
29 of 38
Ref. No (1) 89200 89440 90720 90800 90960 91200 91360 91840 91920 92000 92030 92080 92150 92160 92195 92205 92320 92350 92560 92640 92700
CAS No (2) 007617-31-4 058446-52-9 005793-94-2 000110-15-6 000126-13-6 000126-14-7 007704-34-9 007664-93-9 007727-43-7 010124-44-4 014807-96-6 001401-55-4 000087-69-4 057569-40-1 000112-60-7 038613-77-3 000102-60-3 078301-43-6
Name (3) Stearic acid, copper salt Stearic acid, esters with ethyleneglycol Stearoylbenzoylmethane Stearoyl-2-lactylic acid, calcium salt Succinic acid Sucrose acetate isobutyrate Sucrose octaacetate Sulphur Sulphuric acid Sulphuric acid, barium salt Sulphuric acid, copper salt Talc Tannic acids Tartaric acid Taurine, salts Terephthalic acid, diester with 2,2'methylenebis(4-methyl-6-tert-butylphenol) Tetradecyl-polyethyleneglycol(EO=3-8) ether of glycolic acid Tetraethyleneglycol Tetrakis(2,4-di-tert-butyl-phenyl)-4,4'biphenylylene diphosphonite N.N.N.'N'-Tetrakis(2hydroxypropyl)ethylenediamine 2,2,4,4-Tetramethyl-20-(2,3-epoxypropyl)-7oxa-3,20-diazadispiro[5.1.11.2]-heneicosan21-one, polymer 4,4'-Thiobis(6-tert-butyl-3-methylphenol)
Restrictions and/or specifications (4) SML(T) = 5 mg/kg (7) (expressed as Copper) SML(T) = 30 mg/kg (3)
SML(T) = 1 mg/kg (12) (expressed as Barium) SML(T) = 5 mg/kg (7) (expressed as Copper) According to the JECFA specifications
SML = 15 mg/kg
SML = 18 mg/kg
SML = 5 mg/kg
92800
000096-69-5
92880 92930 93120 93280 93440 93520 93680 93720 93760 93970 94320 94400 94560 94960
041484-35-9 120218-34-0 000123-28-4 000693-36-7 013463-67-7 000059-02-9 and 010191-41-0 009000-65-1 000108-78-1 000077-90-7 000112-27-6 036443-68-2 000122-20-3 000077-99-6
Thiodiethanol bis(3-(3,5-di-tert-butyl-4hydroxy phenyl) propionate) Thiodiethanolbis(5-methoxycarbonyl-2-6dimethyl-l,4-dihydropyridine-3-carboxylate) Thiodipropionic acid, didodecyl ester Thiodipropionic acid, dioctadecyl ester Titanium dioxide alpha-Tocopherol Tragacanth gum 2,4,6-Triamino-l,3,5-triazine Tri-n-butyl acetyl citrate Tricyclodecanedimethanol bis(hexahydrophthalate) Triethyleneglycol Triethyleneglycol bis[3-(3-tert-butyl-4hydroxy -5-methylphenyl) propionate] Triisopropanolamine 1,1,1-Trimethylolpropane
SML = 2.4 mg/kg SML = 6 mg/kg SML(T) = 5 mg/kg (21) SML(T) = 5 mg/kg (21)
30 of 38
Name (3) Trimethylolpropane trimethacrylate-methyl methacrylate copolymer 2,2,4-Trimethyl-1,3-pentanediol di-isobutyrate 1,3,5-Trimethyl-2,4,6-tris(3,5-di-tert-butyl-4hydroxybenzyl)benzene 1,3,5-Tris(4-benzoylphenyl) benzene 2,4,6-Tris(tert-butyl)phenyl-2-butyl-2-ethyl1,3-propanediol phosphite 1,3,5-Tris(4-tert-butyl-3-hydroxy-2,6dimethylbenzyl)-1,3,5-triazine2,4,6(1H,3H,5H)-trione 1,3,5-Tris(3,5-di-tert-butyl-4-hydroxybenzyl)1,3,5-triazine-2,4,6(1H,3H,5H)-trione 1,3,5-tris (2,2-dimethylpropanamido)-benzene 1,1,3-Tris(2-methyl-4-hydroxy-5-tertbutylphenyl) butane Vermiculite, reaction product with citric acid, lithium salt Water Waxes, paraffinic, refined, derived from petroleum based or synthetic hydrocarbon feedstocks
95280
040601-76-1
SML = 0.05 mg/kg SML = 2 mg/kg (as sum of phosphite, phosphate and the hydrolysis product = TTBP) SML = 6 mg/kg
SML = 5 mg/kg SML = 0,05 mg/kg food. SML = 5 mg/kg SML(T) = 0.6 mg/kg (8) (expressed as Lithium) In compliance with the Directive 98/83/EC. SML = 0.05 mg/kg and in compliance with the specifications laid down in Annex V. Not to be used for articles in contact with fatty foods. In compliance with the specifications laid down in Annex V. In compliance with the specifications laid down in Annex V.
95859
Waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks White mineral oils, paraffinic, derived from petroleum based hydrocarbon feedstocks Wollastonite Wood flour and fibers, untreated Xanthan gum Zinc hydroxide Zinc oxide Zinc sulphide
95883
SML(T) = 25 mg/kg (38) (as Zinc) SML(T) = 25 mg/kg (38) (as Zinc) SML(T) = 25 mg/kg (38) (as Zinc) In compliance with specifications included in Annex V
Products obtained by means of bacterial fermentation 18888 080181-31-3 3-Hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer
31 of 38
PART B:
Ref. No
11530 16690 18888
Other Specifications
OTHER SPECIFICATIONS
Acrylic acid, 2-hydroxypropyl ester.
It may contain up to 25% (m/m) of acrylic acid, 2-hydroxyisopropyl ester (CAS N. 002918-23-2)
Divinylbenzene It may contain up to 45% of Ethylvinylbenzene. 3-Hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer Definition The copolymers are produced by the controlled fermentation of Alcaligenes eutrophus using mixtures of glucose and propanoic acid as carbon sources. The organism used has not been genetically engineered and has been derived from a single wild-type organism Alcaligenes eutrophus strain HI6 NCIMB 10442. Master stocks of the organism are stored as freezedried ampoules. A submaster/working stock is prepared from the master stock and stored in liquid nitrogen and used to prepare inocula for the fermenter. Fermenter samples will be examined daily both microscopically and for any changes in colonial morphology on a variety of agars at different temperatures. The copolymers are isolated from heat treatment bacteria by controlled digestion of the other cellular components, washing and drying. These copolymers are normally offered as formulated, melt formed granules containing additives such as nucleating agents, plasticisers, fillers, stabilisers and pigments which all conform to the general and individual specifications. Chemical name Poly(3-D-hydroxybutanoate-co-3-D-hydroxypentanoate) CAS number 080181-31-3 Structural formula CH3 | CH3 O CH2 O | || | || (-O-CH-CH2-C-)m - (O-CH-CH2-C-)n where n/(m+n) greater than 0 and less or equal to 0.25 Not less than 150 000 Daltons (measured by gel permeation chromotography). Average molecular weight Assay Not less than 98% poly(3-D-hydroxybutanoate-co-3-D-hydoxypentanoate) analysed after hydrolysis as a mixture of 3-D-hydroxybutanoic and 3-D-hydroxypentanoic acids. Description White to off-white powder after isolation Characteristics Identification tests: Solubility Soluble in chlorinated hydrocarbons such as chloroform or dichloromethane but practically insoluble in ethanol, aliphatic alkanes and water. Migration The migration of crotonic acid should not exceed 0.05 mg/kg food. Restriction QMA for crotonic acid is 0.05 mg/6 dm Purity Prior to granulation the raw material copolymer powder must contain: -Nitrogen Not more than 2500 mg/kg of plastic -Zinc Not more than 100 mg/kg of plastic -Copper Not more than 5 mg/kg of plastic -Lead Not more than 2 mg/kg of plastic -Arsenic Not more than 1 mg/kg of plastic -Chromium Not more than 1 mg/kg of plastic Polydimethylsiloxane (Mw>6800) Minimum viscosity 100 x 10-6 m2/s (=100 centistokes) at 25oC Syrups, hydrolysed starch, hydrogenated In compliance with the purity criteria for maltitol syrup E 965(ii) (Commission Directive 95/31/EC of 5 July 1995 (O.J. L 178, 28.7.1995, p.1 as last amended by 2004/46/EC of 16 April 2004 (O.J. L 114, 21.04.2004, p.15 ) Triallylamine 40 mg/kg hydrogel at a ratio of 1kg food to a maximum of 1.5 grams of hydrogel. For use only in hydrogels intended for non-direct food contact use. 4-(2-Benzoxazolyl)-4-(5-methyl-2-benzoxazolyl) stilbene Not more than 0.05%w/w (quantity of substance used/quantity of the formulation)
32 of 38
42080
Carbon black Specifications: Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. Benzo(a)pyrene content: max 0,25 mg/kg carbon black. Maximum use level of carbon black in the polymer: 2,5 % w/w Charcoal, activated To be used only in PET at maximum 10 mg/kg of polymer. Same purity requirements as for Vegetable Carbon (E 153) set out by Commission Directive 95/45/EC laying down specific purity criteria concerning colours for use in foodstuffs1 with exception of ash content which can be up to 10% (w/w). Chlorodifluoromethane Content of chlorofluoromethane less than 1 mg/kg of the substance Dibutylthiostannoic acid polymer Molecular unit = (C8H18S3Sn2)n (n=1.5-2) Specifications: Minimum viscosity (at 100C) = 3.8 cSt - Average Mw>450 Maleic anhydride-styrene, copolymer, sodium salt MW fraction < 1000 is less than 0,05% (w/w) Mixture of 4-(2-Benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene, 4,4'-bis(2-benzoxazolyl) stilbene and 4,4'bis(5-methyl-2-benzoxazolyl)stilbene) Mixture obtained from the manufacturing process in the typical ratio of (58-62%):(23-27%):13-17%). Petroleum hydrocarbon resins (hydrogenated) Specifications: Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoid arylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity: > 3 Pa.s at 120 C. Softening point: > 95 C as determined by ASTM Method E 28-67. Bromine number: < 40 (ASTM D1159) The colour of a 50 % solution in toluene < 11 on the Gardner scale Residual aromatic monomer 50 ppm
43480
Polydimethylsiloxane (Mw>6800) Minimum viscosity 100x10-6 m2/s (=100 centistokes) at 25oC Specifications: The fraction with molecular weight below 1000 should not exceed 1.5% w/w Specifications: The fraction with molecular weight below 1000 should not exceed 1 % w/w Polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acids MW fraction < 1000 is less than 5% (w/w) Polyester of 1,4-butanediol with caprolactone MW fraction < 1 000 is less than 0,5 % (w/w)
77895
Polyethyleneglycol (E0 = 2-6) monoalkyl (C16-C18) ether The composition of this mixture is as follows: polyethyleneglycol (E0=2-6)monoalkyl (C16-C18) ether (approx. 28%) fatty alcohols (C16-C18) (approx. 48%)
79600
ethyleneglycol monoalkyl (C16-C18) ether (approx. 24%) Polyethyleneglycol tridecyl ether phosphate Polyethyleneglycol (EO11) tridecyl ether phosphate (mono-and dialkyl ester) with a maximum 10% content of polyethyleneglycol (EO 11) tridecylether
* OJ L 339, 30.12.1996, p. 1.
1 2
OJ L 226, 22.9.1995, p.1. Directive as last amended by Directive 2004/47/EC (OJ L 113 , 20.4.2004, p.24). Quantity of substance used /quantity of formulation
33 of 38
81500
Polyvinylpyrrolidone The substance shall meet the purity criteria established in Commission Directive 96/77/EC (*)
83595
Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft reaction product of phosphorous trichloride and biphenyl Composition: - 4,4-Biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS.N. 38613-77-3) (36-46% w/w2), - 4,3-Biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS.N. 118421-00-4 (17-23% w/w2), - 3,3-Biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS.N. 118421-01-5) (1-5% w/w2), - 4-Biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS.N. 91362-37-7) (11-19% w/w2) - Tris(2,4-di-tert-butylphenyl)phosphite (CAS.N. 31570-04-4) (9-18% w/w2), - 4,4-Biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS.N. 112949-97-0) (<5% w/w2) Other specifications - Phosphor content of min. 5.4%-max 5.9% - Acid value of max. 10 mg KOH per gram - Melt range of 85-110C Soybean oil, epoxidized Oxirane < 8 %, iodine number < 6 Specifications: Average molecular weight not less than 350 Viscosity at 100C min 2.5 cSt
88640 95858
95859
95883
Content of hydrocarbons with carbon number less than 25, not more than 40%(w/w).' Waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks The product should have the following specifications: -Content of mineral hydrocarbons with Carbon number less than 25, not more than 5% (w/w) -Viscosity not less than 11 x 10-6 m2/s (= 11 centistokes) at 100oC -Average molecular weight not less than 500 White mineral oils, paraffinic derived from petroleum based hydrocarbon feedstocks The product should have the following specifications; -Content of mineral hydrocarbons with Carbon number less than 25, not more than 5% (w/w) -Viscosity not less than 8,5 x 10-6 m2/s (=8.5 centistokes) at 100oC -Average molecular weight not less than 480
__________________________
34 of 38
NOTES RELATED TO THE COLUMN RESTRICTIONS AND/OR SPECIFICATIONS (1) (2) Warning: there is a risk that the SML could be exceeded in fatty food simulants. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as Ref. Nos: 10060 and 23920. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as Ref. Nos: 15760, 16990, 47680, 53650 and 89440. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as Ref. Nos: 19540, 19960 and 64800. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as Ref. Nos: 14200, 14230 and 41840. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as Ref. Nos: 66560 and 66580. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 30080, 42320, 45195, 45200, 53610, 81760, 89200 and 92030. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 24886, 38000, 42400, 62020, 64320, 66350, 67896, 73040, 85760, 85840, 85920 and 95725. Warning: there is a risk that the migration of the substance deteriorates the organoleptic characteristics of the food in contact and then, that the finished product does not comply with the second indent of Article 2 of Directive 89/109/EEC. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 30180, 40980, 63200, 65120, 65200, 65280, 65360, 65440 and 73120. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels (expressed as Iodine) of the following substances mentioned as Ref. Nos: 45200, 64320, 81680 and 86800. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 36720, 36800, 36840 and 92000.
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
35 of 38
(13)
SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 39090 and 39120. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 44960, 68078, 69160, 82020 and 89170. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 15970, 48640, 48720, 48880, 61280, 61360 and 61600. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 49595, 49600, 67520, 67515 and 83599. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 50160, 50240, 50320, 50360, 50400, 50480, 50560, 50640, 50720, 50800, 50880, 50960, 51040 and 51120. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 67600, 67680 and 67760. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 60400, 60480 and 61440. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 66400 and 66480. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 93120 and 93280. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 17260, 18670, 54880 and 59280. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 13620, 36840, 40320 and 87040. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 13720 and 40580. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 16650 and 51570. QM(T) in this specific case means that the restriction shall not be exceeded by the sum of the residual quantities of the following substances mentioned as Ref. Nos: 36 of 38
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
14950, 15700, 16240, 16570, 16600, 16630, 18640, 19110, 22332, 22420, 22570, 25210, 25240 and 25270. (27) QMA(T) in this specific case means that the restriction shall not be exceeded by the sum of the residual quantities of the following substances mentioned as Ref. Nos: 10599/90A, 10599/91, 10599/92A and 10599/93. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 13480 and 39680. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 22775 and 69920. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 86480, 86960 and 87120 Compliance testing when there is a fat contact should be performed using saturated fatty food simulants as simulant D. Compliance testing when there is a fat contact should be performed using isoctane as substitute of simulant D (unstable). QMA(T) in this specific case means that the restriction shall not be exceeded by the sum of the residual quantities of the following substances mentioned as Ref. Nos: 14800 and 45600. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 55200, 55280 and 55360. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 25540 and 25550. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Reference Nos 10690, 10750, 10780, 10810, 10840, 11470, 11590, 11680, 11710, 11830, 11890, 11980, 31500 and 76463. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 20020, 20080, 20110, 20140, 20170, 20890, 21010, 21100, 21130, 21190, 21280, 21340 and 21460. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 81515, 96190, 96240 and 96320 as well as of salts (including double salts and acid salts) of zinc of authorised acids, phenols or alcohols. The same restriction for Zn applies to the names containing '... acid(s), salts' which appear in the lists, if the corresponding free acid(s) is (are) not mentioned. Migration limit might be exceeded at very high temperature. 37 of 38
(28)
(29)
(30)
(34)
(35)
(36)
(37)
(38)
(39)
(40)
SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 38940 and 40020. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 47600, 67360. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Ref. Nos: 75100 and 75105. SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as Reference Nos: 19150 and 19180.
(41)
(42)
(43)
38 of 38