Professional Documents
Culture Documents
Hindi Poetry Structure 2
Hindi Poetry Structure 2
org
Basic Structure of Hindi Poetry
Part 2- Maatraa in Metered (Chhandobaddh) Poems
Vinod Tewary and Vani Murarka
(Editors, Kaavyaalaya.org)
Email address: [email protected]
Preface
This is Part 2 of the article series on the basic structure of Hindi poetry. The whole article is in 4 parts as listed
below:
Part 1: Structural units of a poem.
Part 2: (This part) Maatraa () or Meter of a Poem for Tukaant (7), Chhanddobaddh (7@) Poetry -
i.e. poems that follow a clear rhyme and rhythm. These are perhaps the most important ingredients of the craft of
poetry.
Part 3: Maatraa or the meter of poems for Atukaant (7) poetry or Mukt Kavita (4 ), i.e. free
verse.
Part 4: Correspondence with Urdu poetry - Although this article mainly deals with Hindi poetry, some description
of Urdu poetry is included because of the close inter-relationship between the two.
1. Introduction
In this part, we are going to discuss maatraas in the context of the structure of Hindi poems continuing from Part 1.
The Maatraa counting system will be described with examples from 7 and @ Hindi poems and some
Urdu ghazals. These are the poems that follow a clear pattern of rhyme and rhythm. In Part 3, the maatraa
structure of Mukta Kavita will be discussed. A little bit of maatraa count in Indian music is also included in Part 3 in
order to show the correspondence between poetry and music.
Maatraa () is an important aspect of the craft of poetry and presumably applies to all languages. It defines the
meter of the poem. In English maatraas are counted in terms of syllables. In Hindi, inherited by Sanskrit, the rules
are very specific and precise. The maatraa part of Urdu ghazal is simlar though urdu ghazal has its own rules.
This text is based upon our understanding which is admittedly elementary. For an authentic and more detailed
description, consulting a proper book on " 1" is recommended.
2. Maatraa definition and counting system
Each letter in a poem contributes a maatraa that can be 1, or 2, depending upon whether it has a short or long
pronunciation. Half letters contribute 0 or 1 depending upon whether they are pronounced separately or get
telescoped into the following letter. Maatraas in poetry are analogous to the maatraas in Indian music as
interpreted by tabla.
Maatraa in Hindi/Urdu is defined using the following system: the short swar (vowels) , , , are 1 maatraa, and
the long swar , , , and are 2 maatraa. The swar and can have 1 or 2 maatraas depending upon
how they are pronounced.
This flexibility of 1 or 2 maatraas for the swar and based on pronunciation exists more in Avadhee ()
and Urdu ( ). Examples are given below demonstrating this. However, in proper Khadee Bolee ( |) and
its pronunciation, both and consume 2 maatraas each. This is clearly followed in the poetry of the stalwarts
of Khadee Bolee Hindi poetry in such as Dinkar, Bachchan, Subhadra Kumari Chauhaan etc. Nowadays due to the
influence of Urdu and the movies the use of 1 maatraa for and is found even in Khadee Bolee Hindi poetry.
For Khadee Bolee, this is somewhat of a compromise. In Urdu, this is perfectly valid.
Half letters at the beginning of a word usually do not contribute to the maatraa count, because their pronunciation
is telescoped into the following word. For example the half k in klesh (4) or half p in pyaar has 0 maatraa
because 'k' is pronounced jointly with 'l' in 'klesh' and 'p' is pronounced jointly with 'yaa' in pyaar. When a half
letter occurs inside a word then it contributes 1 maatraa like 'sh' in 'kasht' (*) or 'l' in 'kalp' (~).
In Hindi poetry there is a line called sthaayee (1) and then a piece (like a stanza or chhand) called as
described in Part 1. There are different rules for different styles of Hindi poetry. The main rule is that the two lines
that are supposed to rhyme must have the same total number of maatraas plus the same meter, that is the
structure of maatraas (order of maatraas). If the first line starts with a maatraa structure as 1+2, then the next line
must have the same structure 1+2. It is important to note that 1+2 cannot match with 2+1. However 2 can match
with 1+1 so 1+2 or 2+1 can both match 1+1+1. For example " " (2+1) will not match with " " (1+2) but
both will match with " ".
Rules of maatraa in poetry follow exactly the same pattern as the rhythm in music. The maatraa in poetry has the
same meaning as the maatraa in tablaa. This gives some liberty in the maatraa count. In music, one can elongate a
swar or combine two swars into one either by merging the two swars or dragging a swar into another one - the so
called ghaseet in Indian music (a rather unromantic word). In music, you would often see a singer pronouncing a
long '' or '' as short '' or ''. This reduces the maatraa from 2 to 1. It is managed in music through tabla. In
poetry, it is a compromise. In music one can also have half maatraa (for reducing the maatraa count to maintain
the rhythm) which is not recommended in poetry though it is not uncommon.
3. Examples- Chhandobaddh poems- Hindi
Now let us take some examples. First take the perfect example of a chaupaayee from Tulsidas. For him writing
poetry was a poojaa so he did not make compromises in the structure of his poetry. Consider the following from
. The maatraa count following the above rule is given below each line grouped separately in
parenthesis for each word:
(1+2) (1+1+1) (2) (1+1+1+1) (1+1+2) = total 16
(1+1) (1+1) (1+1+1) (1+1+1) (1+1) (1+1+2) = total 16
Note that each line has a total of 16 maatraas and match with each other. The more important thing is the
distribution of maatraas which is identical in both the lines. The maatraas of individual words do not have to
match. Just the series has to match. If a maatraa 2 occurs in the upper line, the maatraas at the corresponding
position in the lower line are either 2 or 1+1. As explained in the previous para, 2 matches with 1+1 or 2 and vice
versa. In fact the maatraa structure of the entire line does not have to be exactly identical in the middle of the
line. The most important thing is they need to match at the beginning and the end of the line that are the ascent
and the descent of the line. The maatraa distribution of each line and the periodicity defines the laya of the poem.
In the language of tabla, the 'sum' occurs at the each line. Those who are familiar with teen taal, will
imemediately identify this structure with teen taal - the most common taal in which Raamcharitmaanas is sung.
Dohaas are 24maatraa. Consider an example of a doha in Raamcharitmaanas:
, 7
(2+2) (1+1+1) (1+2+1) (1+1) (2+2) (2+1) (1) (2+1) = 24
, H
(2) (1+1) (1+1) (1+1+1+1) (1+1+1) (2) (1+1) (1+1) (1+1) (2+1) = 24
Note that the maatraa of in in the first line is 2 whereas the maatraa of in is 1. This is apparent from
their pronunciation. The letter le in bole is pronounced elongated whereas te in tehi is pronounced in short.
In the first line consider what happens if you replace with . It does not violate the maatraa structure or
the meaning. Note, that half r in moorkh does not contribute any maatraa because its pronunciation is telescoped
in moo. In general, the following logic determines when a half letter will consume 1 maatraa and when it will
consume no maatraa:
If a half letter is after a laghu ( ) swar of one maatraa, it would contribute a single maatraa. For
example, in and |, in E consumes 1 maatraa. Thus and E both consume 3
maatraas total and | consumes 4 maatraas total.
If a half letter is after a deergh (| ) swar of 2 maatraas, it would not contribute any maatraa. For
example, c and both are 2+1 maatraas, i.e. the in c does not contribute to the maatraa
count as it is followed by the deergh .
If a half letter is between two deergh swar, then the half-letter does consume one maatraa independently
for itself. For example in c does consumes one maatraa and the total maatraa for this word is
2+1+2 = 5.
One way to verify these cases and similar queries that might arise regarding half letters is to say the word without
the half letter and observe whether it impacts the time duration. Saying (instead of c) does impact the
time and a clear unit of time is missing. Saying | (instead of | ) does not impact the time indicating that in
| is not consuming a maatraa.
Now let us take one more example, in which the rule of maatraa alignment is compromised, rather manipulated,
by adding lahraa or by elongating a letter or by giving a pause:
, 9
(2+1+1) (2+1) (1+2+1) (1+1) (2+1+1) (1+1) (1+1) (2+1) = 24
- 9
(1+1) (1+1+2+1) (1+1+1+1+1+1) (1+1) (2+1+1) (1+1) (2+1) = 24
The extra letter at the end of nirantar is a kind of lahra that elongates the last letter . You can also pronounce
it as 7 or 7 to get the same effect.
Finally, in this context, notice that the total maatraa of a line of doha is 24 in contrast to 16 of a chaupaayee. The
series of maatraa is also different. A doha in general ends with a single maatraa and would end as 2+1 or 1+1+1.
This gives the characteristic change of meter between a doha and a chaupaayee. This is true for any doha, as for
example, written by Rahim.
,
, .
As a self-exercise, you may like to out the maatraa structure of this doha and verify that it has the same structure
as the two dohas quoted above. Pick up some other dohas and do the same exercise.
Now consider the maatraa structure of Jhansi Kee Rani. Consider the same piece as quoted in Part 1:
| ,
(1+1+2+2) (1+1+2+2) (2) (1+1) (1+1+2) (1+2) (1+2+2) (2) = 30
|
(2+1) (1+2) (1+1+2+2) (1+1) (2) (2+2) (2+2) (2+2) (2) = 30
Note that the total maatraas are 30 and the series matches at the beginning and the end of each line. Even though
and | do not align, it does not hamper the rhythm because it is in the middle of the lines.
Now consider this antara
7 ,
(2+2) (2+2) (2+1) (1+2+2) (1+1) (1+1+1+1) (2+1+1+2+2) = 30
1 ,
(1+1) (2+2) (1+1+2+1) (1+2+2+2) (1+1+1+1+2) (1+1+12+2) = 30
Again note how the total maatraas =30 and the series of maatraas match. In counting the maatraas, note that kri
(
) in the first line is one maatraa and gya (7) is counted as 1+1 because of their pronunciations in the respective
words. If a word starts with 7, in general it would be one maatraa because it is a composite of half and full
with half telescoped into .
The main thing to note is that the total number of maatraas of the lines in sthaayee, sahyogee, and the antaraa
match. This ensures the rhythm of the poem. You can verify it for other lines in the antara.
4. Example- Urdu ghazal
Now let us also consider a Urdu ghazal. The definition and the structure of the ghazal will be discussed in Part 4.
For the present purpose of maatraa count, only the basic features of a ghazal are given.
Urdu ghazal has special rules. It consists of couplets (sher ). In the first couplet called matlaa, both lines must
rhyme and have exactly the same maatraa structure (same total as well as same order). In the subsequent
couplets, the second line must rhyme with both the lines of the matlaa and must have the same maatraa structure
as both the lines of the matlaa. The first line of each subsequent couplet should not rhyme with the matlaa but
that is not a strict rule. The maatraa structure of the first lines of each sher must be the same as each other and, in
general, match with matlaa. The last couplet should have the poet's name though some poets (very few, notably
Sahir) have not followed this tradition. In fact Sahir did not write ghazals anyway (very few, mainly in movies).
Now let us see the above rules illustrated with a familiar ghazal from Shakeel. This ghazal has been beautifully
sung by Beghum Akhtar. The maatraa count of this ghazal is given below:
(2+1+2+2) (1+2) (1) (2) (2+2) = 17
-
(2+1+1+1+1+1) (1+2) (1) (2) (2+2) = 17
(Ayaan means to expose)
This is matlaa. Notice both the lines rhyme as 'jaaye'. The number of maatraas in each line is 17. The maatraa
structure is same- if there is 2 in the top line, the bottom line at that place is either 2 or 1+1. Notice that in
is counted as 2, whereas in it is counted as 1 because it has a long pronunciation in bezubaanee and a
short pronounciation in raaze. In general in composite possessive nouns in urdu, has a short pronunciation and
has 1 maatraa (For example - -). Here is another couplet in the same ghazal.
H
(1+1+1) (1+1+2) (1+2+1) (1+1) (2+2) = 17
| 1
(1+1) (1+2) (2+1+2) (1) (2) (2+2) = 17
Notice that the number of maatraa in each line is 17 and each line has the same maatraa structure as the matlaa.
The first line does not rhyme with the matla but the second line rhymes with jaaye.
8th May 2013