Professional Documents
Culture Documents
Abus Jib Cranes
Abus Jib Cranes
Moving on up.
crane systems
Jib Cranes
Moving on up.
crane systems
Performing work in teams unites the potentials of individuals to form a strong company. ABUS jib cranes are efficient partners performing their tasks reliably and easing the load on the people who use them. With its comprehensive product line of jib cranes, ABUS offers flexible and cost efficient material handling solutions for any job in the workplace.
ABUS jib cranes can be individually tailored from the type of mounting or hoist to optional configurations for particular requirements all produced to ABUS high levels of quality. With the touch of a button, they can handle loads up to 6.3 tonnes precisely and effortlessly whether mounted on their own pillars or on walls or columns. For loading
machines, changing heavy tools or lifting workpieces onto tables for processing with ABUS jib cranes, the lifting is easier, more efficient and safer.
Take a look at our brochure: P. 6/7 P. 811 P. 12/13 P. 1417 P. 18/19 Quick overview/standard models ABUS Jib cranes in detail Added value solutions clearly explained Jib cranes used by our customers Mounting solutions P. 2022 P. 23 P. 24 P. 25 Optional configurations ABUS hoists, integral parts of the system ABUS crane systems, all products Enquiry form
Moving on up.
crane systems
Foundation block with anchor rods Electric chain hoist push-pull via pendant from hoist Dowel plate with floor dowels Intermediate plate with floor anchors
to 1t
to 7m
270
Foundation block with anchor rods Electric chain hoist via pendant from hoist Dowel plate with floor dowels Intermediate plate with floor anchors
to 0.5 t
to 7m
270
free-standing
Foundation block with anchor rods Dowel plate with floor dowels Intermediate plate with floor anchors Foundation block with anchor rods
to 4t
to 10 m
n x 360
Push-pull or powered
to 6.3 t
to 10 m
n x 360
powered
Dowel plate with floor dowels Intermediate plate with floor anchors
LW
to 1t
to 7m
180
push-pull
Weld-on plate on building column/wall Wall bracket mounted on reinforced concrete wall
LWX
Wall bracket on steel support Bracket on building support column Weld-on plate on building column/wall Wall bracket mounted on reinforced concrete wall
to 0.5 t
to 7m
180
push-pull
VW to 4t to 10 m Electric chain hoist Push-pull or powered via pendant from hoist alt. mobile pendant control
Wall mounting on steel support Bracket on building support column Weld-on plate on building column/wall Wall bracket mounted on reinforced concrete wall
180
VW 180 * The effective slewing range depends on the installation position; it may be greater or less than 180. to 5t to 10 m Electric wire rope hoist mobile pendant control
Wall mounting on steel support Bracket on building support column Weld-on plate on building column/wall Wall bracket mounted on reinforced concrete wall
180
powered
version in accordance with DIN 15018 (Cranes; principles for steel structures)
and EN 60204-32 (Electrical equipment of machines)
the jib cranes and hoists meet the requirements of EU machinery directive as
well as the German Equipment and Product Safety Law General design
welded ribs on pillar base for reliable transmission of forces and torque corrosion protection through rust removal by mechanical shot blasting to
DIN 55928
single-layer painting of pillars and jib arms in RAL 1007, daffodil yellow direct control with 400 V / 50 Hz control voltage (for jib cranes with electric chain
hoist ABUCompact GM8 and electric wire rope hoist with 48 V control voltage as standard) complete with electrical systems including lockable mains switch and power supply to the hoist electrical equipment with class F insulation, protection type IP 55 operated from floor level via the ABUCommander pendant controls (protection type IP 65) Hoists and trolleys ABUS electric chain hoist ABUCompact 2 lift speeds for quick lifting and precise setting down of loads in a ratio of 1:4 (1:6 for ABUCompact GM8) pole-changing rotary cylinder motor with electromagnetically releasable disc brake adjustable slipping clutch with reliable safeguard against mechanical overloading easy-to-assemble, quick-fitting connectors for electrical power supply and control cables class F insulation, protection type IP 55 motor housing painted in RAL 5017, traffic blue high-strength, galvanised profile steel chain with chain container push-pull trolley, which is rolled on the lower jib arm flange or in the profile of the jib arm clamping buffers fitted as end stops for the trolley ABUS electric wire rope hoist GM 2 lift speeds for quick lifting and precise setting down of loads in a ratio of 1:6 2 travel speeds in a ratio of 1:4 pole-changing rotary cylinder motors with electromagnetically releasable disc brakes contactor control 48 V electronic overload protection with hours in operation counter (included as standard if EU machine directive is applicable) easy-to-assemble electrical connections with quick-fitting connectors class F insulation, protection type IP 55 gear unit limit switches for highest and lowest hook position painted in RAL 5017, traffic blue galvanised lift cable specially constructed for increased service life convenient size due to compact construction practically maintenance-free due to direct drives and lifetime lubrication of the gear units and roller bearings Requirements for use
ABUS jib cranes and components are designed exclusively for use in completely
enclosed buildings under normal industrial operating conditions.
Moving on up.
crane systems
to
270
lightweight design
(DIN 15018 H2/B2)
*)
to
180
lightweight design
(DIN 15018 H2/B2)
*)
3m
5m
6m
7m
lightweight design
(DIN 15018 H2/B2) *)
to
270
4m
6m
7m
to
180
4m
6m
7m
Moving on up.
crane systems
infinite x
360
*)
5m
7m
8m
9m
10 m
to
180
*)
5m
7m
8m
9m
10 m
10
infinite x
360
*)
Jib length Capacity 1000 kg 1600 kg 2000 kg 2500 kg 3200 kg 4000 kg 5000 kg 6300 kg
5m
7m
8m
9m
10 m
electrical system incl. slip-rings powered trolley, 2-speed powered slewing, 2-speed mobile pendant control runs length of jib
to
180
5m
7m
8m
9m
10 m
powered trolley, 2-speed powered slewing, 2-speed mobile pendant control runs
length of jib
Moving on up.
crane systems
11
12
Plug connectors Equipped exclusively with plug connectors designed for rapid, trouble-free connection when installing and servicing. This saves time and ensures greater safety.
Powered trolley The electrically driven trolley moves at the push of a button.
5 4
Powered slewing gear Electrically driven slewing for smooth travel. If you plan a jib crane with ABUS, there are really no limits. Everything you need to turn a single crane into a convenient complete solution is available from a single supplier. This makes planning easier and helps cut costs not only when buying your crane but also in the years which follow. Because the whole is simply worth more than the sum of its parts, it also pays to take a close look at the performance features and cost advantages of ABUS extras, components and accessories.
Safety pillar base The specially designed pillar base with precisely welded ribs and internal support ring ensures safety and stability.
Moving on up.
crane systems
13
The pillar jib crane LS is typically used for lifting tasks that are mostly in the lower capacity range. As shown here in the example of transmission and engine manufacture, the load can be quickly and safely raised and e. g. set down on a pallet. The high lifting speed of 12 m/min with the electric chain hoist also contributes to efficient work performance. The crane is mounted on the existing base plate by means of an intermediate steel plate.
Wall jib crane LW with electric chain hoist ABUCompact GM2 Capacity: Jib length: Lift height: 250 kg 7m 3.1 m
The wall jib crane LW is an unobtrusive and reliable aid when it comes to moving lighter loads by hand. Its lightweight design allows it and its load to be guided quickly and precisely even at longer jib lengths. This is an effective aid to daily operation as in this case in the picking area for packaging machines. This crane is mounted with a brakket on the building support column. The brackets fit around the supports, even those with large crosssections, to bring the crane to the desired height.
14
Pillar jib crane LSX with electric chain hoist ABUCompact GM2 Capacity: Jib length: Overall height: 500 kg 3.2 m 3.4 m
The advantages of the pillar jib crane LSX are evident in workplaces with restricted room heights, as can be seen here in the measuring room for components of machine tools. Due to its special construction with the raised jib arm, a good lift height can be reached even with low ceilings. Jib arm and hoist are located at a safe distance away from the area in which the operator moves. The crane is mounted by means of a steel dowel plate with special floor dowels conforming to the permissible dynamic loads.
Wall jib crane LWX with electric chain hoist ABUCompact GMC Capacity: Jib length: Lift height: 100 kg 3m 2.5 m
Low ceilings and additional required floor clearance are typical criteria for selecting the LWX wall jib crane. Its low space requirements and practicable lift height make a strong argument in its favour. The continuously controllable ABUCompact GMC provides particularly delicate lifting and setting down of the load at this assembly station. The wall bracket included in the delivery is used to mount the crane on a steel support in the rooms wall.
Moving on up.
crane systems
15
Used in the assembly of road construction machines, this VS pillar jib crane moves larger loads that can no longer be safely and conveniently moved by hand. The crane is therefore equipped with electric, 2-speed drives for the trolley and slewing. Operation is independent of the load position with mobile pendant controls that move parallel to the jib arm, simplifing handling and ensuring safer working. The crane is securely anchored to a base foundation.
Wall jib crane VW with electric chain hoist ABUCompact GM4 Capacity: Jib length: Lift height: 1t 5m 5.3 m
This crane is required in tank and container construction for transport of loads between work levels of different heights. The design of the wall jib crane VW enables the given building dimensions to be used to the fullest, so that the transfer of the load is achieved at the highest possible lift height. The crane has electric, 2-speed trolley and slewing drives, without which the desired movements of the load would be practically impossible. Weld-on plates are used to mount the crane directly on the steel supports of the building.
16
Pillar jib crane VS with electric wire rope hoist GM 1000 Capacity: Jib length: Overall height: 5t 7m 5m
Plates and steel components of varying size and weighing up to 5 t are required in mould and die production. With the pillar jib crane VS, these can be reliably moved. With electric, 2-speed trolley and slewing drives equipped as standard, the crane can be easily operated via the freely movable control unit with the pendant controls. The cone-shaped pillar tip allows the smallest possible approach dimension to the pillar even with high loads. The crane is solidly mounted on a large-sized base foundation with anchor rods.
Wall jib crane VW with electric wire rope hoist GM 800 Capacity: Jib length: Lift height: 3.2 t 5m 3m
Tight installation conditions, high load capacities and a precise movement of the load into the tool machine characterise this application example. The optimisation of the lift height at 3.2 t is achieved through the use of an ABUS electric wire rope hoist. Two-speed control of electrically driven movements in all directions enables delicate handling of workpieces and equipment. The crane is mounted with weld-on plates at the back on the additionally placed support structure.
Moving on up.
crane systems
17
Foundation with ABUS ideal anchors ABUS ideal anchors offer an intelligent mounting alternative whenever the later site of the crane is to remain freely walkable and drivable for the time being. The two-part anchor rods are connected to each other with sleeves. The sleeves are flush with the floor surface and are protected by cover caps. To mount the crane, threaded bolts are screwed into the sleeves.
Intermediate plate on a concrete floor Using a square intermediate plate, the crane can be mounted on a suitable existing concrete floor. After the floor plate has been drilled and chiselled out, anchors are inserted and cast. ABUS delivers the intermediate plate and, on request, the appropriate floor anchors.
Intermediate plate on a concrete suspended ceiling Alternatively, the intermediate plate can be mounted to a suitable concrete ceiling with through-wall anchors. ABUS delivers the intermediate plate and, on request, the appropriate through-wall anchors.
Dowel plate on a concrete floor/a concrete ceiling Pillar jib cranes of average Safe Working Loads are particularly efficient with our dowel mounting system. This system uses Fischer dowels, especially developed for dynamic loads, which are fitted into the countersunk holes of the round dowel plate during install. ABUS delivers the dowel plate, the required dowels as well as a mould ring for the grouting.
Alignment and underpouring Safety while working requires the careful alignment of a crane prior to initial operation. The existing floors are not always level enough to ensure this. All mounting systems of our pillar jib cranes therefore offer the necessary room for adjustment through an assembly gap. The subsequent grouting of the crane ensures stability.
18
On reinforced concrete supports using brackets On structurally suitable, square or rectangular reinforced concrete supports which can be freely enveloped, wall jib cranes can be mounted with brackets. The required tension forces can be applied through threaded rods to hold the crane securely to the support at the desired height. The support must have the required minimum width for this. ABUS delivers brackets designed for the support dimensions, together with the required mounting material.
On reinforced concrete walls or supports using weld-on plates Concrete walls or supports can be prepared for the mounting of wall jib cranes on weld-on plates through suitable mounting plates with grouted anchoring as a substructure. When performing this construction work, care should be taken that the mounting plates lie exactly flush and exhibit plumb-vertical connection surfaces. The weld-on plates are welded to the substructure. The wall bracket or the wall mountings of the crane are bolted onto the weld-on plates. ABUS delivers the weld-on plates with the required mounting screws. On steel supports using weld-on plates Weld-on plates can be welded directly onto steel supports or load-bearing steel structures providing holes will not or cannot be drilled through them. (not pictured)
On reinforced walls using wall brackets and through-wall anchors For mounting on reinforced concrete walls of adequate load-bearing capacity, wall brackets are used. For the types LW and LWX, the wall bracket is included in the scope of delivery. For the type VW, it is available as optional equipment. The wall brackets are mounted on the wall with ties and counterplates. Included in the ABUS scope of delivery are the anchor rods, counterplates and the required mounting materials, all adapted for the respective wall thickness.
Structural inspection of the building Jib cranes transfer forces and torque to the building and supporting structures. Safe crane operation depends entirely on the adequate checking of the support structure by a structural engineer.
Moving on up.
crane systems
19
20
21
Jib crane with additional power socket and plug on hoist (Fig. 13)
Electric drives
Some combinations of optional component configurations may not be compatible. Advice freely available upon request.
Adjustable brake/slewing resistance control Mobile control unit runs length of jib
X X X X
X X X X X
X X X X X X X X
X X X X
X X X X X
X X X X X X X X
9 / 10 11 12
Operation
Controls on load hook Remote control Electronic control/contactor control, 48 V electric chain hoist Electronic control/contactor control, 48 V trolley travel/slewing Infinitely variable hoist speed via frequency converter Infinitely variable hoist trolley and slew drive motions
Control
(R) for particularly delicate lifting and lowering of the load (R) for particularly delicate moving of the load (N) only with direct control lift/lower (N) with type VS only with mechanical slewing limits
13
X X
X X
X X
X X
X X
X X
14
Moving on up.
crane systems
22
ABUCompact GM4 (not pictured) Capacity: to 1,250 kg Lifting speeds*): to 20 m/min ABUS electric chain hoists Among the powerhouses of the ABUS jib cranes are the ABUS electric chain hoists ABUCompact. The hoists of the ABUS chain hoist generation ABUCompact are distinguished by a fresh design and convincing technical features. In connection with jib cranes, the chain hoists GM2, GM4, GM6 and GM8 with 3 Ph/400 V offer reliable power packs for load capacities to 4 t in a particularly low headroom design for optimum utilisation of space. They also boast a precision lifting function for careful raising and lowering of sensitive goods.
ABUCompact GM6 (not pictured) Capacity: to 2,500 kg Lifting speeds*): to 16 m/min The smaller GMC rounds out the ABUCompact series. A continuous lift speed for 100 or 200 kg, and the fact that it is delivered ready for connection to a 230 V socket, makes it the ideal chain hoist for flexible application in lifting lighter loads. The modular construction of motor and gear units opens the stage for a comprehensive range of products with lift speeds of up to 20 m/min or FEM classifications to 4 m at a persuasive price. In addition, there are advantages that are especially appreciated in practice: minimal maintenance work required due to especially durable brake linings (in normal cases, 1 million full load brakings until the first readjustment), lifetime lubrication of precision gear units, adjustable slipping clutch, specially hardened low-wearing chain, plug connectors for safe mounting or inspection, and much more. For more information, please refer to our product brochure ABUS Electric Chain Hoists.
ABUS electric wire rope hoists GM The ABUS electric wire rope hoists GM cover the essential load range from 1 to 120 tonnes. Five basic models are available, all with main and precision lifting speeds as standard equipment.
And these units are compact. All components feature endurance from motors to wire ropes, from gear units to brakes, from power systems to electronic circuitry. For more information, please refer to our product brochure ABUS Wire Rope Hoists.
23
Overhead cranes
Jib cranes
ABUS has specialised in floor-free lifting and conveying technology to 120 t deliberately. Not only because this load range represents the vast majority of applications, but also in order to pass onto you the economic benefits of product standardisation to the full. ABUS offers a comprehensive range of economical and immediately available materials handling solutions: overhead cranes, jib cranes, light crane systems, lightweight mobile gantries, monorail hoists, electric wire rope hoists, electric chain hoists and a wide variety of components. The range thus extends from solutions for extraordinary applications to the implementation of complete material handling systems.
Add to this the special self-conception of ABUS: When we offer something, we offer it based on advice that focuses on practical use, with assured quality, with individual user support and comprehensive, fast and reliable service with 24-hour availability.
High-performance components
24
Enquiry form
2 2 5 3 4 5 3 4
1 2 3
mm kg mm
4 5
mm
1 2 3
mm kg mm
4 5
mm
Slewing gear:
push-pull powered
Trolley:
push-pull powered
Moving on up.
crane systems
25
ABUS Crane Systems Ltd. Unit 1 Business Village Blackbushe Business Park Yateley Hampshire GU46 6GA Phone (01252) 749 000 Fax (01252) 749 001 e-mail: [email protected] www.abuscranes.co.uk
712364/???/2.13
Moving on up.
crane systems