Professional Documents
Culture Documents
Winchester 1895 Rifle
Winchester 1895 Rifle
We sincerely hope that you are pleased with your new Winchester Model 1895. We at U.S. Repeating Arms Company thank you for the privilege of crafting this riflefor you. We are especially proud of the many years of enjoyment it is certain to provide for you and your family. The Model 1895 is another in an over 125 year-old tradition of producing quality firearms for the Worlds sportsmen. Quality of manufacture, design, craftsmanship and function are of utmost concern to us. We believe youll find that your new 1895 meets the Winchester tradition of quality in every way. If you have any questions or comments regarding your new firearm, please feel free write to
Use the space below to record information about your new Model 1895 rifle Model _________________________________________ Caliber ________________________________________ Serial Number __________________________________ Purchased From _________________________________ Date of Purchase ________________________________
us.
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page Gun safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 3 General description . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 4 Terminology and descriptions . . . . . . . . . . . . . . . . . . . . . .4 Serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Ammunition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Initial cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Oiling the action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Operation of the hammer & safety . . . . . . . . . . . . . .7 - 12 General operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Loading procedures magazines . . . . . . . . . . . . . .13 - 16 Unloading procedures magazines . . . . . . . . . . . .16 - 18 Firing procedures . . . . . . . . . . . . . . . . . . . . . . . . . . .16 - 18 In the case of a misfire . . . . . . . . . . . . . . . . . . . . . . . . . .18 Sight adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Cleaning and maintenance suggestions . . . . . . . . .22 - 24 Ordering parts / service or repair . . . . . . . . . . . . . . . . . .24
This Model 1895 rifle is certainly one of the most famous in the line of Winchester World Class arms. We sincerely hope that you are pleased with your new rifle. We at U.S. Repeating Arms Company thank you for the privilege of crafting this rifle for you. We are especially proud of the many years of enjoyment it is certain to provide for you and your family. This is the rifle Teddy Roosevelt called his big medicine. It became the preference of major powers worldwide, with Russia alone purchasing nearly 300,000 1895s just before World War I. It was designed for the new generation of cartridges utilizing smokeless powder and pointed bullets. As with many of the great lever actions of the last century, the Model 1895 was designed by John M. Browning specifically for Winchester. With its quick handling characteristics, box magazine and pointed bullet capability, the world of sporting rifles would never be the same again. The 1895 was remarkable in its day and this new 1895 is a remarkable chance to own a milestone setting rifle.
bumped, or jarred with a chambered round might accidentally discharge even with the safety on, causing serious injury to you or someone else. When a round is chambered keep the safety on until you are ready to shoot. 2. Do not rely on the safety to prevent accidental discharge. Many safeties merely block the trigger and prevent firing by pulling the trigger. The safety may not prevent an accidental discharge due to dropping, jarring, or bumping a gun. 3. Use only ammunition for which the gun is chambered as indicated on the barrel, to prevent excessive pressure and possible serious personal injury. 4. Incorrectly reloaded ammunition can cause serious personal injury and damage to the firearm due to excessive pressure. Reload only after proper instruction and in strict compliance with instruction and data contained in current reloading manuals. 5. Never point a gun at anything you do not intend to shoot. Always keep it pointed in a safe direction in case of accidental discharge. 6. Always check to ensure that the barrel is free of obstructions before loading and using the gun. If you experience light recoil or off sound, check the barrel for obstruction.
PLEASE READ AND UNDERSTAND ALL OF THE CAUTIONS, PROPER HANDLING PROCEDURES AND INSTRUCTIONS OUTLINED IN THIS BOOKLET BEFORE USING YOUR NEW FIREARM.
1. Do not carry a loaded gun with a live round in the chamber while walking, running, climbing a tree, crossing a fence or anywhere you might slip or fall, drop the gun or otherwise bump or jar the gun. A gun that is dropped,
7. Before firing, clean any grease or oil out of barrel with cleaning rod and patch. Grease or heavy accumulation of oil can cause excessive pressure and result in serious personal injury. 8. Keep barrel, chamber and action free of rust. Rust in the barrel and chamber can cause excessive pressures resulting in serious injury. A rusted, pitted or eroded barrel should be replaced. 9. Use hearing protection to prevent ear damage from repeated exposure to gunfire. 10. Always use proper shooting glasses to prevent eye injury from flying particles. 11. Never carry a loaded gun in a motor vehicle or carry one into a dwelling. Always carefully unload the gun before entering a motor vehicle, a dwelling or an area such as a camp. Always point a gun in a safe direction while loading or unloading to prevent serious injury in case of an accidental discharge. Never load in the house or in your vehicle. 12. Never shoot at a hard, flat surface or at the surface of water to avoid a ricochet and possible serious personal injury to yourself or a bystander. 13. Store guns in a clean dry place out of reach of children
and separated from stored ammunition. 14. Never alter any parts of your gun. Any alterations or adjustments that may become necessary to the operating mechanism should be performed by a qualified gunsmith.
GENERAL DESCRIPTION
Your new Model 1895 rifle is a modern version of the rifle that broke new ground and set new standards for rifles as the 1800s came to a close and the innovations of the 20th century began. With a few minor exceptions, the action is virtually identical to the way the originals were made in 1895. The primary difference is the addition of a top tang mounted safety switch for added convenience and an increased margin of safety. The 1895s safety mechanism incorporates both a hammer stop and a rebounding hammer. These advanced features move the traditional Model 1895 design to a new level of convenience. These features are explained in detail later in this manual. When originally introduced, the Winchester 1895s unique non-detachable box magazine design allowed a lever action repeater for the first time to handle the new jacketed, pointed bullets, utilizing newly developed smokeless powder. The improved ballistics quickly made the 1895 the choice of many of the most famous big game
FIGURE 1A
Top Tang Safety Buttstock Muzzle Forearm Magazine Ejection/Loading Port Rear Sight Barrel Front Sight
hunters of the day. This advanced rifle gave riflemen of the past the distinct bullet protection advantages of a box magazine with the convenient firing speed of a lever action. You still get all these advantages in your new Model 1895. The smooth, sleek, no-snag lines from muzzle to buttstock make the Model 1895 an ideal saddle gun. Cycling the lever smoothly moves a cartridge from the box magazine to the chamber. After firing, working the lever ejects the empty cartridge nearly straight up and slightly to the right, over your head. Returning the lever upward cycles a new cartridge from the magazine into the chamber. The 1895s uncanny, reliable, smooth func-
tion made it famous in its day . . . and you will still appreciate this advantage on your new rifle.
Rebounding Hammer
FIGURE 1B
Breech Bolt
FIGURE 1C
IMPORTANT: Refer to Figures 1A-C for general part descriptions regarding your new rifle. You must become familiar with all part names listed before proceeding with the rest of the instructions in this manual.
SS
Finger Lever
AMMUNITION
Your Winchester Model 1895 is designed to shoot modern factory cartridges only. The caliber of your new Model 1895 is inscribed on the top of the barrel, above the chamber area, just in front of the receiver. Your Model 1895 has a non-detachable box magazine that holds 4 cartridges. If shooting is imminent, one additional cartridge can be placed in the chamber for a total capacity of 5 rounds.
SERIAL NUMBER
The serial number is located on the right side of the receiver, adjacent to where the receiver meets the forearm. Record the serial number at the front of this book for future reference.
MAKE SURE YOU USE ONLY THE EXACT AMMUNITION/ CALIBER AS LISTED ON THE BARREL.
Incorrectly reloaded ammunition can cause serious personal injury and damage to the firearm due to excessive pressure. Reload only after proper instruction and in strict compliance with instructions and data contained in current reloading manuals.
INITIAL CLEANING
Some metal parts of your new Model 1895 have been coated at the factory with a rust preventative compound. Before using your Model 1895, clean the anti-rust compound from the inside of the barrel, receiver, cartridge feed mechanism and the action/chamber areas. A high quality, light gun oil should be used to remove this compound and to give your new gun its first lubrication. Clean the barrel using a cleaning rod and patch as explained under Cleaning and Maintenance Suggestions found later in this manual. First lubrication suggestions are outlined below. If your new Model 1895 is for collectors purposes only, and is to remain unfired, it is permissible to leave the rust preventative compound in place and keep your Model 1895 in its box for maximum protection during long term storage.
DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS, OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD AND OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES. WASH HANDS THOROUGHLY AFTER EXPOSURE.
FIGURE 2
Lightly oil the action at these points
On all pivot points and bearing surfaces on the lever mechanism. Avoid applying too much oil. Only a light film is necessary. Cleaning and Maintenance Suggestions should be followed before each oiling.
FIGURE 3
Hammer in cocked position
FIGURE 4
HAMMER POSITIONS
The rebounding hammer on your Model 1895 has two positions as follows: Rebound position. This position (See Figure 3) takes the place of the dropped and half-cocked positions found on the original Model 1895s of a century ago. The rebounding feature of the hammer essentially eliminates the dropped position. The hammer only travels to the dropped position momentarily after the trigger has been pulled with the hammer cocked. The hammer then automatically moves to the rebound position.
TIMES AND SHOULD BE IN THAT POSITION EXCEPT (1) WHEN FIRING IS IMMINENT (2) OR IMMEDIATELY AFTER THE ACTION HAS BEEN CYCLED.
Cocked position. This is the position that the hammer is moved to when firing is imminent (See Figure 4). It is also the position the hammer moves to when the action is cycled using the finger lever.
WHEN THE HAMMER IS IN THE COCKED POSITION THE SAFETY SHOULD BE IN THE ON POSITION (WITH THE S SHOWING) UNLESS FIRING IS IMMINENT.
FIGURE 5A
Safety in on (safe) position
S S
FIGURE 5B
Safety in off (fire) position
The safety on your new Model 1895 is built into the top tang of the receiver. The safety switch itself is fitted into an elongated, machined recess in the tang. On Position. When the safety is pushed all the way rearward it is in the on position (See Figure 5-A). In this position an S is visible directly in front of the safety. Moving the safety fully rearward and exposing the S blocks the hammer from striking the firing pin.
THIS IS THE RECOMMENDED POSITION OF THE SAFETY FOR ALL TIMES EXCEPT WHEN FIRING IS IMMINENT.
SAFETY POSITIONS
Off Position. When the safety (manual hammer stop) is pushed all the way forward it is in the off position (See Figure 5-B). THIS IS THE POSITION OF THE SAFETY WHEN FIRING IS IMMINENT. In this position, when the trigger is pulled, the cocked hammer will fall and strike the firing pin. If a cartridge is in the chamber, the firing pin will strike the primer and fire the cartridge.
The safety (also referred to as the manual hammer stop) is a modern feature built into the action of your Model 1895 to provide an additional level of safety. When the safety has been placed in the on position it serves the function of blocking the hammer from striking the firing pin. It does not prevent the hammer from falling when the trigger is pulled, even if the safety is on. When the trigger is pulled with the safety on the hammer drops, going immediately to the rebound position without impacting the firing pin.
FIGURE 6A
FIGURE 6B
(Refer again to Figure 5-B). The safety can be actuated with the hammer in the rebound or cocked position.
LOWERING THE HAMMER
Be extremely careful!
At any time the hammer can be cocked either manually or by cycling the finger lever fully. Unless shooting is imminent it is important to lower the hammer immediately to the rebound position from the cocked position. To do this:
1. MAKE SURE THE BARREL IS POINTED IN A SAFE DIRECTION AND THAT THE SAFETY (MANUAL HAMMER STOP) IS IN THE ON POSITION.
2. Get a stable grip on your rifle with your hand in shooting position. Place your thumb on the hammer and firmly hold the hammer back slightly with your thumb. 3. While holding the hammer back, apply just enough pressure on the trigger to release the hammer from the full-cock position (See Figure 6-A). Immediately remove your finger from the trigger and slowly and carefully allow the hammer to lower into the rebound position (See Figure 6-B).
To place the safety (hammer stop) in the on position: First, point your rifle in a safe direction, then place the safety in the on position by pulling it fully to the rear with your thumb until the red warning spot is covered by the safety and the S is visible (Refer again to Figure 5-A). To place the safety (hammer stop) in the off position: Push the safety fully forward, covering the S inscribed on the rifle, and exposing the red warning dot. When the red dot is visible below the safety it is in the off position
10
FIGURE 7
It is not a safety. It is simply an interlock to assure that the breech is fully closed before a cartridge can be discharged. Never rely on the cocking lever catch to prevent accidental discharge.
IMPORTANT INFORMATION ABOUT THIS RIFLE'S SAFETY MECHANISMS
Finger Lever
It is important that the breech be fully closed before your rifle is fired. To help assure that this is always the case, your Model 1895 has a cocking lever catch mechanism. It is the small hook-shaped part that protrudes from the bottom of the receiver and engages the lever when it is fully up. The catch holds the lever up, and keeps the bolt in the locked position until downward pressure is exerted by your hand on the lower portion of the two-piece finger lever. To fire your rifle make sure that the finger lever engages the cocking lever catch (See Figure 7).
ALWAYS ASSUME THAT YOUR GUN CAN BE FIRED AT ANY TIME, EVEN WITH ALL SAFETY MECHANISMS ENGAGED. WHENEVER YOU ARE NOT ACTUALLY FIRING YOUR RIFLE ALWAYS BE CERTAIN THAT YOUR RIFLE IS POINTED IN A SAFE DIRECTION.
11
Continually be aware of the position of the safety (manual hammer stop) on your rifle. Check it both manually and visually to avoid any chance of accidental discharge. Always keep the safety in the on position unless you are actually firing the rifle. It is a good idea to keep the action open (with the finger lever down) at all times other than when you are in the field and shooting is imminent.
ters, or by our special Classic Traditions service facility in Arnold, Missouri. See Service or Repair later in this manual for details on how to obtain service for your Winchester rifle.
GENERAL OPERATION
ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
Prior to using live ammunition, it is essential that you familiarize yourself thoroughly with these operating instructions. Get accustomed to the feel of your new gun. Know the forces required to operate the action Know what forces are required to pull the trigger
IMPORTANT: IT IS ALWAYS RECOMMENDED THAT THE ACTION BE KEPT OPEN AT ALL TIMES WHEN YOUR RIFLE IS LAYING ON ANY BENCH OR TABLE AT A SHOOTING RANGE OR OTHER FACILITY. ALWAYS KEEP THE MUZZLE OF YOUR RIFLE POINTED IN A SAFE DIRECTION. FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS COULD RESULT IN INJURY OR DEATH TO YOURSELF OR OTHERS.
ABOVE ALL, KNOW HOW TO PLACE THE HAMMER INTO THE REBOUND POSITION AND THE SAFETY (MANUAL HAMMER STOP) INTO THE ON POSITION.
Throughout this manual the action refers to the mechanism of a firearm which loads and secures the cartridge in the chamber. If the action resists closing, do not force it. Small pieces of grit or other obstructions can make it difficult to close the action. Make sure all surfaces are clean if any unusual resistance is felt. However, remember that this is a finely fitted action purposely made with tight fit-
12
FIGURE 8
FIGURE 9
ting tolerances. This assures your gun of good part-to-part fit for many years to come and is the sign of a finely crafted firearm.
LOADING PROCEDURES
USE THE CORRECT AMMUNITION AS INDICATED BY THE INSCRIPTION ON THE BARREL. AS EXPLAINED PREVIOUSLY, BEFORE LOADING YOUR RIFLE MAKE SURE ALL GREASE AND OIL HAVE BEEN REMOVED FROM THE BARREL AND CHAMBER, AND THAT THERE ARE NO OBSTRUCTIONS IN THE BARREL OR ACTION AREAS.
LOADING THE CHAMBER The chamber may be loaded two ways: 1. Load the chamber by placing a cartridge directly into the chamber through the opened action (See Figure 8), 2. Or load the chamber by transferring a cartridge that was previously loaded into the magazine to the chamber by operating the finger lever. To cycle the lever, pull it downward and fully forward with the fingers of your hand inserted in the finger lever loop (See Figure 9). Then return it upward to its original position.
13
FIGURE 10
Position the base against the follower Move the base rearward under the feed guides
FIGURE 11
IN EITHER CASE, ALWAYS FIRST PLACE THE SAFETY (MANUAL HAMMER STOP) IN THE ON POSITION, AND THEN PLACE THE HAMMER INTO THE SAFETY (REBOUND), POSITION UPON CLOSING THE ACTION.
LOADING THE MAGAZINE The magazine is loaded by placing a cartridge directly into the nondetachable magazine through the open action through the top. 1. MAKE SURE THAT THE SAFETY (MANUAL HAMMER STOP) IS IN THE ON POSITION, AND THEN OPEN THE ACTION.
2. Place a cartridge in down through the open receiver in a vertical position base first, and position the base against the magazine follower just forward of the magazine feed guides (See Figure 10). 3. Using the cartridge to depress the follower, push down on the follower and begin to angle the cartridge so that the point lowers toward the front of the magazine and the base starts under the magazine feed guides. 4. Move the base rearward under the magazine feed guides (See Figure 11). The spring action of the follower will pull the cartridge down, into position. You may need to slide the cartridge back with your finger to make sure the
14
FIGURE 12
FIGURE 13
Use the cartridge base to push down just forward of the feed guides
base is seated against the rear of the magazine and that the bullet points have proper clearance at the front of the magazine (See Figure 12). 5. Then, insert the next cartridge in the same manner, pushing the preceding cartridge base down onto the previous cartridge just forward of the magazine feed guides, then down into the magazine as explained in steps 3 and 4 (See figure 13). 6. Repeat this procedure with each cartridge until the magazine is fully loaded (four cartridges).
BEFORE LOADING, ALWAYS MAKE SURE TO ALWAYS PLACE THE SAFETY (MANUAL HAMMER STOP) IN THE ON POSITION, AND THE HAMMER INTO THE REBOUND, POSITION. CAUTION: ALWAYS MAKE SURE THE CARTRIDGES ARE OF THE PROPER CALIBER FOR YOUR RIFLE. CHECK THE AMMUNITION DESIGNATION ON THE BARREL. FAILURE TO FOLLOW THIS INSTRUCTION CAN RESULT IN SEVERE DAMAGE TO YOUR GUN AND POSSIBLE SERIOUS INJURY TO YOURSELF OR OTHERS.
15
FIGURE 14
Also, if the magazine has been loaded to full capacity and you wish to add an additional round to the chamber for a total capacity of five, you must manually insert a cartridge in the chamber and then push down on the top cartridge while you close the action. In either case, the cartridge must be pushed down enough so that the bottom of the breech bolt will not catch the top of the cartridge rim (and attempt to chamber the cartridge) as it moves forward.
IMPORTANT: UNLESS SHOOTING IS IMMINENT, DO NOT CARRY ANY GUN WITH A LOADED ROUND IN THE CHAMBER TO AVOID ACCIDENTAL DISCHARGE.
In two circumstances it may be necessary to prevent a cartridge from feeding from the magazine while the action is closed. IN BOTH SITUATIONS, ALWAYS MAKE SURE THE SAFETY (MANUAL HAMMER STOP) IS IN THE ON POSITION. If the magazine has been loaded to full capacity and you wish to close the action without placing a cartridge in the chamber it is necessary to push down on the top cartridge with the fingers of your free hand while you close the action (See figure 14).
UNLOADING
Fully unloading your rifle when storing your rifle or in other appropriate situations is essential to safe gun handling. The safety (manual hammer stop) on your new Model 1895 is of utmost importance during unloading. When in the on position, it allows you to cycle the action and eject loaded cartridges from the magazine with the hammer blocked from striking the firing pin.
16
FIGURE 15
It is possible to catch the ejected cartridges with your hand
DOWNWARD FULLY. THIS WILL EXTRACT ANY CARTRIDGE FROM THE CHAMBER AND EJECT IT.
Capture (or pick up) the cartridge and return the finger lever fully upward. 2. Proceed to operate the finger lever in the same manner transferring all the remaining cartridges from the magazine to the chamber and then eject them out. It is possible, with practice, to carefully work the lever and capture the loaded ejected cartridges with your other hand each time the lever is cycled (See Figure 15). This is preferable to letting the loaded cartridges eject onto the ground where they may be damaged.
BEFORE UNLOADING, CHECK TO ASSURE THAT THE SAFETY (MANUAL HAMMER STOP) IS IN THE ON POSITION (SAFE) BY PULLING IT FULLY TO THE REAR UNTIL THE S JUST FORWARD OF THE SAFETY IS VISIBLE. KEEP YOUR FINGER AWAY FROM THE TRIGGER WHEN CYCLING THE ACTION.
1. WITH THE GUN POINTED IN A SAFE DIRECTION AND YOUR FINGER OFF THE TRIGGER, SWING THE FINGER LEVER
THROUGHOUT THE UNLOADING PROCESS MAKE SURE THAT THE SAFETY (MANUAL HAMMER STOP) STAYS IN THE ON POSITION (WITH THE S SHOWING) AND THAT YOU KEEP YOUR FINGER AWAY FROM THE TRIGGER AT ALL TIMES.
When cartridges no longer eject when you cycle the action, further assure that no cartridges remain by opening the action and visually checking the chamber and feed/magazine mechanism to be sure no cartridges remain.
17
FIGURE 16
Visually check the follower to make sure no cartridges are present Visually check the chamber. Make sure no cartridge is chambered
FIGURE 17
IMPORTANT: ALWAYS VISUALLY NOTE, BY LOOKING THROUGH THE TOP OF THE OPEN RECEIVER, THAT THE MAGAZINE FOLLOWER IS SHOWINGAND NOT A CARTRIDGE (SEE FIGURE 16). ALWAYS DOUBLE CHECK THAT NO CARTRIDGE REMAINS IN THE CHAMBER (SEE FIGURE 17).
After the last live round is moved out of the magazine and ejected, immediately lower the hammer to the safe (rebound) position as explained previously.
CAUTION: IN CASE OF MISFIRE, KEEP THE BARREL POINTED IN A SAFE DIRECTION, PLACE THE MANUAL HAMMER STOP IN THE ON POSITION AND CAREFULLY OPEN ACTION WHILE AVOIDING DIRECT EXPOSURE TO THE BREECH BY YOURSELF AND OTHERS.
18
Carefully inspect the ejected cartridge. If the primer is indented, the cartridge should be disposed of in a manner that would prevent accidental injury to you or others. If there is no indentation, your gun has malfunctioned and should be serviced. See Service or Repair later in this manual for details on how to obtain service for your Winchester rifle. It is important that you be fully familiar and totally competent with your rifles handling and operation procedures. With the safety (manual hammer block) in the on position, it is possible to cock the hammer and pull the trigger, and then, when the cartridge fails to fire, think the rifle has misfired. However, you may have merely forgotten to move the safety to the off position. In either case, always keep the muzzle pointed in a safe direction until you determine the cause.
Firmly position your thumb on the hammer and draw back to full cock
FIGURE 18
FIRING
IMPORTANT: WHEN YOU ARE PREPARING TO SHOOT, IT IS ALWAYS ESSENTIAL THAT YOU BE TOTALLY SURE OF YOUR TARGET. ALWAYS BE AWARE OF ALL OBJECTS BEHIND YOUR TARGET. KNOW THE EXACT LOCATION OF PERSONS WITH YOU AND ANY
19
CAUTION: YOUR RIFLE IS NOW READY TO FIRE. REMEMBER, THE RECOIL FROM A LARGE CALIBER CENTERFIRE RIFLE WILL BE SOMEWHAT HEAVIER THAN MOST OTHER GUNS, SO FIRMLY SHOULDER YOUR GUN.
3. Take aim, and when on target squeeze the trigger smoothly, without jerking. After firing, let the trigger return to the fully forward position. To continue the loading process and chamber another round for the next shot: 4. Swing the finger lever fully down extracting and ejecting the fired cartridge case from the chamber. 5. Close the action by returning the finger lever upward. The closing of the action will transfer a new cartridge from the magazine to the chamber, leaving the hammer in a cocked ready to fire position. Repeat step #3 above or go immediately to step #6 below. 6. WHEN THROUGH FIRING ALWAYS IMMEDIATELY PLACE THE SAFETY (MANUAL HAMMER STOP) IN THE ON POSITION (REFER BACK TO FIGURE 5-A), AND THE HAMMER IN THE REBOUND POSITION (REFER BACK TO FIGURE 6).
To later fire additional cartridges from the magazine with an empty casing still in the chamber simply work the finger lever downward fully ejecting the empty cartridge and then return the lever to the original upward position. Repeat the firing sequence again.
WHEN FIRING IS COMPLETED OR WHEN SHOOTING IS NO LONGER IMMINENT, IMMEDIATELY RETURN THE SAFETY (MANUAL HAMMER STOP) TO THE ON POSITION AND RETURN THE HAMMER TO THE REBOUND POSITION. IMPORTANT: UNDER NO CIRCUMSTANCES SHOULD YOU MOVE ON OR CONTINUE TO HUNT WITH YOUR HAMMER OR SAFETY IN THE FIRE POSITION.
At this point you will need to either refill the magazine with loaded cartridges (if shooting is imminent), or fully unload your rifle (if shooting is completed).
IMPORTANT: ALWAYS KEEP YOUR MODEL 1895 SHOULDERED WHEN EJECTING AN EMPTY CARTRIDGE CASE. Ejection is up and slightly to the right. If you eject a cartridge with the rifle lowered and the action directly in front of your face, it is possible that the ejected cartridge could strike the shooter in the face.
20
FIGURE 19
FIGURE 20
Caution should be taken by the shooter and bystanders behind the shooter. When an empty cartridge is correctly ejected it will fall to the ground in an area behind and to the right of the shooter.
SIGHT ADJUSTMENTS
Model 1895 rifles are fitted with traditional open sights.
OPEN STYLE SIGHTS
sight base (where fastened to the barrel) to the right, your gun will shoot more to the right. An adjustment to the left can be made by tapping the base to the left (See Figure 20). Care should be taken not to mar the finish or bend sights when adjustments are made.
Your firearm can be adjusted to shoot higher by moving the rear sight elevator backward by one or more notches. In order to shoot lower, the elevator can be moved forward (See Figure 19). The rear sight is attached to the barrel in a dove-tailed slot machined into the barrel. By gently tapping the rear
A NONMARRING BRASS, PLASTIC OR FIBER HAMMER AND/OR DRIFT IS ALWAYS PREFERRED FOR THIS OPERATION.
21
BEFORE PERFORMING ANY CLEANING PROCEDURES, ALWAYS MAKE CERTAIN THERE ARE NO CARTRIDGES IN THE CHAMBER, MAGAZINE OR ACTION/FEED AREAS.
You should clean your Model 1895 after every day of shooting and more often if it becomes excessively dirty. A minimum cleaning includes wiping down the action and oiling key parts. Most regular maintenance will also include cleaning the barrel. If you encounter a function problem (tight action when working the finger lever), be sure to give your gun a thorough cleaning to see if it solves the problem before seeking the services of our service facility or a competent gunsmith. To clean your firearm, follow the general outline below:
CLEANING PROCEDURES
ALWAYS PLACE THE SAFETY (MANUAL HAMMER STOP) IN THE ON (SAFE) |POSITION BEFORE BEGINNING ANY CLEANING PROCEDURE.
1. Use a cleaning rod with a tip and patch suitable for your rifles bore. Make sure the patch is large enough for a snug fit in the bore. Insert the rod and patch into the barrel at the muzzle end and run it back and forth several times. USE A CROWN PROTECTOR IF POSSIBLE. Be careful not to strike the crown of the muzzle with the handle end of the rod. Damage to this area can affect the accuracy of the rifle. 2. Inspect the chamber and bore for brass, copper and powder fouling. A normal amount of powder residue can be expected and is not serious. It can usually be removed by repeating step one, using a patch saturated with solvent. If or when fouling should become heavy, it can be removed with a brass bore brush. Dip or spray the brush with solvent and scrub the chamber and bore until the fouling is removed. To prevent brass bristles from breaking off, the brush should be pushed completely through the bore before being withdrawn. 3. After fouling has been removed the bore should be wiped dry. Then pass a slightly oiled patch through the bore, for preservation. A fine, light gun oil is recommended.
BE CERTAIN YOUR GUNS CHAMBER AND MAGAZINE ARE UNLOADED. ALWAYS WEAR PROTECTIVE SAFETY GLASSES DURING ALL CLEANING PROCEDURES. KEEP AMMUNITION AWAY FROM THE CLEANING AREA. DO NOT TEST THE FUNCTION OF YOUR FIREARM WITH LIVE AMMUNITION.
22
4. Wipe all exposed metal surfaces of the receiver, forearm and barrel with a clean rag. Finger marks should be removed because they provide a place where moisture can accumulate. Any dried oil in the receiver area should also be removed. 5. Then lightly oil your gun at the points described under Oiling the Action explained earlier in this manual. Ordinary good judgment will, of course, indicate that the metal of the gun should receive a light film of oil any time the rifle has been exposed to weather or handling. Remember, the polished, finely fitted surfaces of the receiver and action mechanisms must always have a thin film of oil. Make sure that the surfaces of the breech block, lever components and feed mechanism parts are especially clean and lightly oiled with a high quality gun oil. Do not use pure silicone or lanolin.
8. Store your Model 1895 in a quality protective case to prevent scratches and dents. Store in a dry place to prevent corrosion. Store away from children. Make sure your gun is unloaded and always store ammunition separately.
OTHER CLEANING SUGGESTIONS
Never pour large quantities of oil into the receiver or other parts. It can drain down to the wood and soften it and cause permanent damage and loosening of the stock. After extended periods of heavy use, your gun should be taken to a qualified gunsmith to have the action disassembled for professional cleaning and lubrication.
NEVER ATTEMPT TO TAKE YOUR MODEL 1895 APART FURTHER THAN EXPLAINED IN THIS MANUAL.
This is a specialized, finely fitted mechanism. You may permanently mar it by attempting to disassemble the inner mechanism assemblies. If further disassembly for service or cleaning is required, take your gun to a U. S. Repeating Arms Company Authorized Repair Center or a competent gunsmith as explained under Service or Repair.
6. INSPECT THE BARREL AND CHAMBER. Make certain that no patches have been inadvertently left in them. Remove any that remain. 7. Wipe all wood surfaces.
23
ORDERING PARTS
To order parts, please write our parts department and furnish the following: your name, address, and telephone number. Also specify the caliber, model, serial number and grade of your Winchester Model 1895. When we receive your request, we will send an order form and a parts breakdown with prices. Write to: Firearms Service Center U.S. Repeating Arms Company, Inc. 275 Winchester Avenue New Haven, Connecticut 06511-1970
SERVICE OR REPAIR
If your Winchester Model 1895 rifle should ever need repair or service we suggest you utilize one of the worldwide network of U.S. Repeating Arms Company Authorized Repair Centers (ARCs) for Winchester firearms. A special repair center for your Model 1895 also provides the full scope of service for your rifle. Contact: Classic Triditions Service Center U.S. Repeating Arms Company, Inc. 3005 Arnold, Missouri 63010-9460 Phone: (203) 789-5000 When returning your firearm for servicing you must. 1. Make sure it is completely unloaded. 2. Package the firearm securely. Wrap the rifle in paper or other protective packaging and place gun in the original box, including a note of explanation. (The box supplied with your rifle will protect the gun, but is not designed for shipping.) Place inside a cardboard box approved for strength in interstate shipping.
CAUTION: PARTS ARE MADE FOR WINCHESTER BRAND GUNS MANUFACTURED BY U.S. REPEATING ARMS COMPANY, INC., AND SHOULD NOT BE USED IN OTHER GUNS EVEN THOUGH MODELS MAY BE SIMILAR. IMPROPERLY FITTED PARTS MAY BE DANGEROUS.
24
U.S. REPEATING ARMS COMPANY IS NOT RESPONSIBLE FOR DAMAGE INCURRED DURING SHIPPING.
3. Ensure that a letter is enclosed with your firearm (attached to it in some way) describing the trouble experienced and the repairs or alterations desired. Include your complete address and both work and home phone numbers. 4. Remember, never return ammunition with your firearm. It is against postal and most commerce regulations. If you have any questions about how to obtain service for your Winchester Model 1895 rifle, or if you have other questions about Winchester rifles and shotguns, call or write our Customer Service department: Customer Service U. S. Repeating Arms Company, Inc. 275 Winchester Avenue Morgan, Utah 84050-9333 Phone: 1-800-945-5237
25
U.S. Repeating Arms Company, Inc. 275 Winchester Avenue New Haven, Connecticut, U.S.A. 06511-1970 Administrative Offices: 275 Winchester Avenue, Morgan, Utah 84050-9333