Professional Documents
Culture Documents
Oracle Database 12c New Features
Oracle Database 12c New Features
During this Oracle Database 12c new features article series, I shall be extensively exploring some of the very important new additions and enhancements introduced in the area of Database Administration, RMAN, High Availability and Performance Tuning. Part I covers: 1. Online migration of an active data file 2. Online table partition or sub-partition migration 3. Invisible column 4. Multiple indexes on the same column 5. DDL logging 6. Temporary undo in- and- outs 7. New backup user privilege 8. How to execute SQL statement in RMAN 9. Table level recovery in RMAN 10. Restricting PGA size 1. Online rename and relocation of an active data file Unlike in the previous releases, a data file migration or renaming in Oracle database 12c R1 no longer requires a number of steps i.e. putting the tablespace in READ ONLY mode, followed by data file offline action. In 12c R1, a data file can be renamed or moved online simply using the ALTER DATABASE MOVE DATAFILE SQL statement. While the data file is being transferred, the end user can perform queries, DML and DDL tasks. Additionally, data files can be migrated between storages e.g. from non-ASM to ASM and vice versa. Rename a data file: SQL> ALTER DATABASE MOVE DATAFILE '/u00/data/users01.dbf' TO '/u00/data/users_01.dbf'; Migrate a data file from non-ASM to ASM: SQL> ALTER DATABASE MOVE DATAFILE '/u00/data/users_01.dbf' TO '+DG_DATA'; Migrate a data file from one ASM disk group to another: SQL> ALTER DATABASE MOVE DATAFILE '+DG_DATA/DBNAME/DATAFILE/users_01.dbf ' TO '+DG_DATA_02'; Overwrite the data file with the same name, if it exists at the new location: SQL> ALTER DATABASE MOVE DATAFILE '/u00/data/users_01.dbf' TO '/u00/data_new/users_01.dbf' REUSE; Copy the file to a new location whilst retaining the old copy in the old location: SQL> ALTER DATABASE MOVE DATAFILE '/u00/data/users_01.dbf' TO '/u00/data_new/users_01.dbf' KEEP;
You can monitor the progress while a data file being moved by querying the v$session_longops dynamic view. Additionally, you can also refer the alert.log of the database where Oracle writes the details about action being taken place. 2. Online migration of table partition or sub-partition Migration of a table partition or sub-partition to a different tablespace no longer requires a complex procedure in Oracle 12c R1. In a similar way to how a heap (non-partition) table online migration was achieved in the previous releases, a table partition or sub-partition can be moved to a different tablespace online or offline. When an ONLINE clause is specified, all DML operations can be performed without any interruption on the partition|sub-partition which is involved in the procedure. In contrast, no DML operations are allowed if the partition|sub-partition is moved offline. Here are some working examples: SQL> ALTER TABLE table_name tablespace tablespace_name; MOVE PARTITION|SUBPARTITION partition_name TO TO
SQL> ALTER TABLE table_name MOVE PARTITION|SUBPARTITION partition_name tablespace tablespace_name UPDATE INDEXES ONLINE;
The first example is used to move a table partition|sub-partition to a new tablespace offline. The second example moves a table partition/sub-partitioning online maintaining any local/global indexes on the table. Additionally, no DML operation will get interrupted when ONLINE clause is mentioned. Important notes:
o o o
The UPDATE INDEXES clause will avoid any local/global indexes going unusable on the table. Table online migration restriction applies here too. There will be locking mechanism involved to complete the procedure, also it might leads to performance degradation and can generate huge redo, depending upon the size of the partition, sub-partition. 3. Invisible columns In Oracle 11g R1, Oracle introduced a couple of good enhancements in the form of invisible indexes and virtual columns. Taking the legacy forward, invisible column concepts has been introduced in Oracle 12c R1. I still remember, in the previous releases, to hide important data columns from being displayed in the generic queries we used to create a view hiding the required information or apply some sort of security conditions. In 12c R1, you can now have an invisible column in a table. When a column is defined as invisible, the column wont appear in generic queries, unless the column is explicitly referred to in the SQL statement or condition, or DESCRIBED in the table definition. It is pretty easy to add or modify a column to be invisible and vice versa: SQL> CREATE TABLE emp (eno number(6), ename name varchar2(40), sal number(9) INVISIBLE); SQL> ALTER TABLE emp MODIFY (sal visible); You must explicitly refer to the invisible column name with the INSERT statement to insert the database into invisible columns. A virtual column or partition column can be defined as invisible too. However, temporary tables, external tables and cluster tables wont support invisible columns.
4. Multiple indexes on the same column Pre Oracle 12c, you cant create multiple indexes either on the same column or set of columns in any form. For example, if you have an index on column {a} or columns {a,b}, you cant create another index on the same column or set of columns in the same order. In 12c, you can have multiple indexes on the same column or set of columns as long as the index type is different. However, only one type of index is usable/visible at a given time. In order to test the invisible indexes, you need to set the optimizer_use_use_invisible_indexes=true. Heres an the example: SQL> CREATE INDEX emp_ind1 ON EMP(ENO,ENAME); SQL> CREATE BITMAP INDEX emp_ind2 ON EMP(ENO,ENAME) INVISIBLE;
5. DDL logging There was no direction option available to log the DDL action in the previous releases. In 12cR1, you can now log the DDL action into xml and log files. This will be very useful to know when the drop or create command was executed and by who. The ENABLE_DDL_LOGGING initiation parameter must be configured in order to turn on this feature. The parameter can be set at the database or session levels. When this parameter is enabled, all DDL commands are logged in an xml and a log file under the $ORACLE_BASE/diag/rdbms/DBNAME/log|ddl location. An xml file contains information, such as DDL command, IP address, timestamp etc. This helps to identify when a user or table dropped or when a DDL statement is triggered. To enable DDL logging SQL> ALTER SYSTEM|SESSION SET ENABLE_DDL_LOGGING=TRUE; The following DDL statements are likely to be recorded in the xml/log file:
o o o
CREATE|ALTER|DROP|TRUNCATE TABLE DROP USER CREATE|ALTER|DROP PACKAGE|FUNCTION|VIEW|SYNONYM|SEQUENCE 6. Temporary Undo Each Oracle database contains a set of system related tablespaces, such as, SYSTEM, SYSAUX, UNDO & TEMP, and each are used for different purposes within the Oracle database. Pre Oracle 12c R1, undo records generated by the temporary tables used to be stored in undo tablespace, much similar to a general/persistent table undo records. However, with the temporary undo feature in 12c R1, the temporary undo records can now be stored in a temporary table instead of stored in undo tablespace. The prime benefits of temporary undo includes: reduction in undo tablespace and less redo data generation as the information wont be logged in redo logs. You have the flexibility to enable the temporary undo option either at session level or database level.
Compatibility parameter must be set to 12.0.0 or higher Enable TEMP_UNDO_ENABLED initialization parameter Since the temporary undo records now stored in a temp tablespace, you need to create the temporary tablespace with sufficient space For session level, you can use: ALTER SESSION SET TEMP_UNDO_ENABLE=TRUE; Query temporary undo information
The dictionary views listed below are used to view/query the information/statistics about the temporary undo data: o V$TEMPUNDOSTAT o DBA_HIST_UNDOSTAT o V$UNDOSTAT To disable the feature, you simply need to set the following: SQL> ALTER SYSTEM|SESSION SET TEMP_UNDO_ENABLED=FALSE;
7. Backup specific user privilege In 11g R2, SYSASM privilege was introduced to perform ASM specific operations. Similarly, backup and recovery tasks specific privilege SYSBACKUP has been introduced in 12c to execute backup and recovery commands in Recovery Manager (RMAN). Therefore, you can create a local user in the database and grant the SYSBACKUP privilege to perform any backup and recovery related tasks in RMAN without being granting the SYSDBA privilege. $ ./rman target "username/password as SYSBACKUP"
8. How to execute SQL statement in RMAN In 12c, you can now execute any SQL and PL/SQL commands in RMAN without the need of a SQL prefix: you can execute any SQL and PLS/SQL commands directly from RMAN. How you can execute SQL statements in RMAN: RMAN> SELECT username,machine FROM v$session; RMAN> ALTER TABLESPACE users ADD DATAFILE SIZE 121m;
9. Table or partition recovery in RMAN Oracle database backups are mainly categorized into two types: logical and physical. Each backup type has its own pros and cons. In previous editions, it was not feasible to restore a table or partition using existing physical backups. In order to restore a particular object, you must have logical backup. With 12c R1, you
can recover a particular table or partition to a point-in-time or SCN from RMAN backups in the event of a table drop or truncate. When a table or partition recovery is initiated via RMAN, the following action is performed:
o o
Required backup sets are identified to recover the table/partition An auxiliary database will be configured to a point-in-time temporarily in the process of recovering the table/partition o Required table/partitions will be then exported to a dumpfile using the data pumps o Optionally, you can import the table/partitions in the source database o Rename option while recovery An example of a table point-in-time recovery via RMAN (ensure you already have a full database backup from earlier): RMAN> connect target "username/password as SYSBACKUP"; RMAN> RECOVER TABLE username.tablename UNTIL TIME 'TIMESTAMP' AUXILIARY DESTINATION '/u01/tablerecovery' DATAPUMP DESTINATION '/u01/dpump' DUMP FILE 'tablename.dmp' NOTABLEIMPORT automatically. -- this option avoids importing the table -- can rename
Important notes: Ensure sufficient free space available under /u01 filesystem for auxiliary database and also to keep the data pump file o A full database backup must be exists, or at least the SYSTEM related tablespaces The following limitations/restrictions are applied on table/partition recovery in RMAN:
o o o o
SYS user table/partition cant be recovered Tables/partitions stored under SYSAUX and SYSTEM tablespaces cant be recovered Recovery of a table is not possible when REMAP option used to recovery a table that contains NOT NULL constraints 10. Restricting PGA size Pre Oracle 12c R1, there was no option to limit and control the PGA size. Although, you set a certain size toPGA_AGGREGATE_TARGET initialization parameter, Oracle could increase/reduce the size of the PGA dynamically based on the workload and requirements. In 12c, you can set a hard limit on PGA by enabling the automatic PGA management, which requires PGA_AGGREGATE_LIMIT parameter settings. Therefore, you can now set the hard limit on PGA by setting the new parameter to avoid excessive PGA usage. SQL> ALTER SYSTEM SET PGA_AGGREGATE_LIMIT=2G; SQL> ALTER SYSTEM SET PGA_AGGREGATE_LIMIT=0; --disables the hard limit Important notes: When the current PGA limits exceeds, Oracle will automatically terminates/abort the session/process that holds the most untenable PGA memory. In part 2, you will learn more on new changes on Cluster, ASM, RMAN and database administration areas.
Part 2 covers: 1. Table partition maintenance enhancements 2. Database upgrade improvements 3. Restore/Recover data file over the network 4. Data Pump enhancements 5. Real-time ADDM 6. Concurrent statistics gathering
In Part I, I explained how to move a table partition or sub-partition to a different tablespace either offline or online. In this section, you will learn other enhancements relating to table partitioning.
Adding multiple new partitions Before Oracle 12c R1, it was only possible to add one new partition at a time to an existing partitioned table. To add more than one new partition, you had to execute an individual ALTER TABLE ADD PARTITION statement to every new partition. Oracle 12c provides the flexibility to add multiple new partitions using a single ALTER TABLE ADD PARTITION command. The following example explains how to add multiple new partitions to an existing partitioned table: SQL> CREATE TABLE emp_part (eno number(8), ename varchar2(40), sal number (6)) PARTITION BY RANGE (sal) (PARTITION p1 VALUES LESS THAN (10000), PARTITION p2 VALUES LESS THAN (20000), PARTITION p3 VALUES LESS THAN (30000) );
SQL> ALTER TABLE emp_part ADD PARTITION PARTITION p4 VALUES LESS THAN (35000), PARTITION p5 VALUES LESS THAN (40000);
In the same way, you can add multiple new partitions to a list and system partitioned table, provided that theMAXVALUE partition doesnt exist.
How to drop and truncate multiple partitions/sub-partitions As part of data maintenance, you typically either use drop or truncate partition maintenance task on a partitioned table. Pre 12c R1, it was only possible to drop or truncate one partition at a time on an existing partitioned table. With Oracle 12c, multiple partitions or sub-partitions can be dropped or merged using a single ALTER TABLE table_name {DROP|TRUNCATE} PARTITIONS command. The following example explains how to drop or truncate multiple partitions on an existing partitioned table:
SQL> ALTER TABLE emp_part DROP PARTITIONS p4,p5; SQL> ALTER TABLE emp_part TRUNCATE PARTITONS p4,p5;
To keep indexes up-to-date, use the UPDATE INDEXES or UPDATE GLOBAL INDEXES clause, shown below: SQL> ALTER TABLE emp_part DROP PARTITIONS p4,p5 UPDATE GLOBAL INDEXES; SQL> ALTER TABLE emp_part TRUNCATE PARTITIONS p4,p5 UPDATE GLOBAL INDEXES;
If you truncate or drop a partition without the UPDATE GLOBAL INDEXES clause, you can query the columnORPHANED_ENTRIES in the USER_INDEXES or USER_IND_PARTITIONS dictionary views to find out whether the index contains any stale entries.
The new enhanced SPLIT PARTITION clause in 12c will let you split a particular partition or sub-partition into multiple new partitions using a single command. The following example explains how to split a partition into multiple new partitions:
SQL> CREATE TABLE emp_part (eno number(8), ename varchar2(40), sal number (6)) PARTITION BY RANGE (sal) (PARTITION p1 VALUES LESS THAN (10000), PARTITION p2 VALUES LESS THAN (20000), PARTITION p_max VALUES LESS THAN (MAXVALUE) ); SQL> ALTER TABLE emp_part SPLIT PARTITION p_max INTO (PARTITION p3 VALUES LESS THAN (25000), PARTITION p4 VALUES LESS THAN (30000), PARTITION p_max);
Merge multiple partitions into one partition You can merge multiple partitions to a single partition using a single ALTER TBALE MERGE PARTITIONS statement:
SQL> CREATE TABLE emp_part (eno number(8), ename varchar2(40), sal number (6)) PARTITION BY RANGE (sal) (PARTITION p1 VALUES LESS THAN (10000), PARTITION p2 VALUES LESS THAN (20000), PARTITION p3 VALUES LESS THAN (30000), PARTITION p4 VALUES LESS THAN (40000), PARTITION p5 VALUES LESS THAN (50000), PARTITION p_max (MAXVALUE) ); SQL> ALTER TABLE emp_part MERGE PARTITIONS p3,p4,p5 INTO PARTITION p_merge; If the range falls in the sequence, you can use the following example:
2. Database upgrade improvements Whenever a new Oracle version is announced, the immediate challenge that every DBA confronts is the upgrade process. In this section, I will explain the two new improvements introduced for upgrading to 12c.
Pre-upgrade script A new and much improved pre-upgrade information script, preupgrd.sql, replaces the legacy utlu[121]s.sql script in 12c R1. Apart from the preupgrade checks verification, the script is capable of addressing the various issues in the form of fixup scripts that are raised during the pre-post upgrade process. The fixup scripts that are generated can be executed to resolve the problems at different levels, for example, pre-upgrade and post upgrade. When upgrading the database manually, the script must be executed manually before initiating the actual upgrade procedure. However, when the Database Upgrade Assistant (DBUA) tool is used to perform a database upgrade, it automatically executes the pre-upgrade scripts as part of the upgrade procedure and will prompt you to execute the fixup scripts in case of any errors that are reported. The following example demonstrates how to execute the scripts:
SQL> @$ORACLE_12GHOME/rdbms/admin/preupgrd.sql
The above script generates a log file and a [pre/post]upgrade_fixup.sql script. All these files are located under the $ORACLE_BASE/cfgtoollogs directory. Before you continue with the real upgrade procedure, you should run through the recommendations mentioned in the log file and execute the scripts to fix any issues. Note: Ensure you copy the preupgrd.sql and utluppkg.sql scripts from the 12c Oracle home/rdbms/admin directory to the current Oracle database/rdbms/admin location.
Parallel-upgrade utility The database upgrade duration is directly proportional to the number of components that are configured on the database, rather than the database size. In previous releases, there was no direct option or workaround available to run the upgrade process in parallel to quickly complete the overall upgrade procedure. The catctl.pl (parallel-upgrade utility) that replaces the legacy catupgrd.sql script in 12c R1 comes with an option to run the upgrade procedure in parallel mode to improve the overall duration required to complete the procedure. The following procedure explains how to initiate the parallel (with 3 processes) upgrade utility; you need to run this after you STARTUP the database in UPGRADE mode:
cd $ORACLE_12_HOME/perl/bin $ ./perl catctl.pl n 3 -catupgrd.sql The above two steps need to be run explicitly when a database is upgraded manually. However, the DBUA inherits the both new changes.
3. Restore/Recover data files over the network Yet another great enhancement in 12c R1. You can now restore or recover a data file, control file, spfile, tablespace or entire database between primary and standby databases using a SERVICE name. This is particularly useful to synchronize the primary and standby databases. When there is a pretty long gap found between the primary and standby database, you no longer require the complex roll-forward procedure to fill the gap between the primary and standby. RMAN is able to perform standby recovery getting the incremental backups through the network and applying them to the physical standby database. Having said that, you can directly copy the required data files from the standby location to the primary site using the SERVICE name e.g. in the case of a data file, tablespace lost on the primary database, or without actually restoring the data files from a backup set. The following procedure demonstrates how to perform a roll forward using the new features to synchronize the standby database with its primary database: On the physical standby database:
The above example uses the primary_db_tns connect string defined on the standby database, connects to the primary database, performs an incremental backup, transfers these incremental backups over standby destination, and then applies these files to the standby database to synchronize the standby. However, you need to ensure you have configured primary_db_tns to point to the primary database on the standby database side. In the following example, I will demonstrate a scenario to restore a lost data file on the primary database by fetching the data file from the standby database: On the primary database:
4. Data Pump enhancements This part of the section will focus on the important enhancements introduced in data pumps. There are quite a few useful additions, such as converting view into a table while exporting and turning off logging while import.
Turn off redo log generation The new TRANSFORM option introduced in data pumps import provides the flexibility to turn off the redo generation for the objects during the course of import. When DISABLE_ARCHIVE_LOGGING values is specified with theTRANSFORM option, redo generation for the objects in the context will be turned off during the entire import duration. This feature provides a great relief when importing large tables, and reduces the excessive redo generation, which results in quicker imports. This attribute applies to tables and indexes. This example demonstrates this feature:
Transport view as table This is another improvement in the data pumps. With the new VIEWS_AS_TABLES option, you can unload the view data into a table. The following example describes how to unload views data into a table during export: $ ./expdp directory=dpump dumpfile=abcd.dmp logfile=abcd.log views_as_tables=my_view:my_table
5. Real-time ADDM analysis Analyzing past and current database health statuses through a set of automatic diagnostic tools such as AWR, ASH and ADDM is part of every DBAs life. Though each individual tool can be used at various levels to measure the databases overall heath and performance, no tool can be used when the database is unresponsive or totally hung. When you encounter an unresponsive database or hung state, and if you have configured Oracle Enterprise Manager 12c Cloud Control, you can diagnose serious performance issues. This would give you a good picture about whats currently going on in the database, and might also provide a remedy to resolve the issue. The following step-by-step procedure demonstrates how to analyze the situation on the Oracle EM 12c Cloud Control :
o o o
Select the Emergency Monitoring option from the Performance menu on the Access the Database Home page.This will show the top blocking sessions in the Hang Analysis table. Select the Real-Time ADDM option from the Performance to perform Real-time ADDM analysis. After collecting the performance data, click on the Findings tab to get the interactive summary of all the findings.
6. Gathering statistics concurrently on multiple tables In previous Oracle database editions, whenever you execute a DBMS_STATS procedure to gather table, index, schema or database level statistics, Oracle used to collect stats one table at a time. If the table is big enough, then increasing the parallelism was recommended. With 12c R1, you can now collect stats on multiple tables, partitions and sub partitions concurrently. Before you start using it, you must set the following at the database level to enable the feature: SQL> ALTER SYSTEM SET RESOURCE_MANAGER_PLAN='DEFAULT_MAIN'; SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=4; SQL> EXEC DBMS_STATS.SET_GLOBAL_PREFS('CONCURRENT', 'ALL'); SQL> EXEC DBMS_STATS.GATHER_SCHEMA_STATS('SCOTT');
Tuning ASM rebalance operations The new EXPLAIN WORK FOR statement in 12c measures the amount of work required for a given ASM rebalance operation and inputs the result in V$ASM_ESTIMATE dynamic view. Using the dynamic view, you can adjust thePOWER LIMIT clause to improve the rebalancing operation work. For example, if you want to measure the amount of work required for adding a new ASM disk, before actually running the manual rebalance operation, you can use the following: SQL> EXPLAIN WORK FOR ALTER DISKGROUP DG_DATA ADD DISK data_005;
SQL> SELECT est_work FROM V$ASM_ESTIMATE; SQL> EXPLAIN WORK SET STATEMENT_ID='ADD_DISK' FOR ALTER DISKGROUP DG_DATA AD DISK data_005; SQL> SELECT est_work FROM V$ASM_ESTIMATE WHERE STATEMENT_ID = 'ADD_DISK; You can adjust the POWER limit based on the output you get from the dynamic view to improve the rebalancing operations. ASM Disk Scrubbing The new ASM Disk Scrubbing operation on a ASM diskgroup with normal or high redundancy level, verifies the logical data corruption on all ASM disks of that ASM diskgroup, and repairs the logical corruption automatically, if detected, using the ASM mirror disks. The disk scrubbing can be performed at disk group, specified disk or on a file and the impact is very minimal. The following examples demonstrate the disk scrubbing scenario: SQL> ALTER DISKGROUP dg_data SCRUB POWER LOW:HIGH:AUTO:MAX; SQL> ALTER DISKGROUP dg_data SCRUB FILE '+DG_DATA/MYDB/DATAFILE/filename.xxxx.xxxx' REPAIR POWER AUTO;
Active Session History (ASH) for ASM The V$ACTIVE_SESSION_HISOTRY dynamic view now provides the active session sampling on ASM instance too. However, the use of diagnostic pack is subject to the license.
2. Additions/Enhancements in Grid Infrastructure Flex Clusters Oracle 12c support two types of cluster configuration at the time of Clusterware installation: Traditional Standard Cluster and Flex cluster. In a traditional standard cluster, all nodes in a cluster are tightly integrated to each other and interact through a private network and can access the storage directly. On the other hand, the Flex Cluster introduced two types of nodes arranged in Hub and Leaf nodes architecture. The nodes arranged in Hub nodes category are similar to the traditional standard cluster, i.e. they are interconnected to each other through a private network and have the directly storage read/write access. The Leaf nodes are different from the Hub nodes. They dont need to have direct access to the underlying storage; rather they access the storage/data through Hub nodes. You can configure Hub nodes up to 64, and Leaf nodes can be many. In an Oracle Flex Cluster, you can have Hub nodes without having Leaf nodes configured, but no Leaf nodes exist without Hub nodes. You can configure multiple Leaf nodes to a single Hub node. In Oracle Flex Cluster, only Hub nodes will have direct access to the OCR/Voting disks. When you plan large scale Cluster environments, this would be a great feature to use. This sort of setup greatly reduces interconnect traffic, provides room to scale up the cluster to the traditional standard cluster. There are two ways to deploy the Flex Cluster: 1. While configuring a brand new cluster 2. Upgrade a standard cluster mode to Flex Cluster
If you are configuring a brand new cluster, you need to choose the type of cluster configuration during step 3, select Configure a Flex Cluster option and you will have to categorize the Hub and Leaf nodes on Step 6. Against each node, select the Role, Hub or Leaf, and optionally Virtual Hostname too. The following steps are required to convert a standard cluster mode to Flex Cluster mode: 1. Get the current status of the cluster using the following command: $ ./crsctl get cluster mode status 2. Run the following command as the root user: $ ./crsctl set cluster mode flex $ ./crsctl stop crs $ ./crsctl start crs wait
3. Change the node role as per your design $ $ $ $ ./crsctl ./crsctl ./crsctl ./crsctl get node role config set node role hub|leaf stop crs start crs -wait
Note the following: o You cant revert back from Flex to Standard cluster mode o Cluster node mode change requires cluster stack stop/start o Ensure GNS is configured with a fixed VIP
With 12c, OCR can be now be backed-up in ASM disk group. This simplifies the access to the OCR backup files across all nodes. In case of OCR restore, you dont need to worry about which node the OCR latest backup is on. One can simply identify the latest backup stored in the ASM from any node and can perform the restore easily. The following example demonstrates how to set the ASM disk group as OCR backup location: $ ./ocrconfig -backuploc +DG_OCR IPv6 support With Oracle 12c, Oracle now supports IPv4 and IPv6 network protocol configuration on the same network. You can now configure public network (Public/VIP) either on IPv4, IPv6 or combination protocol configuration. However, ensure you use the same set of IP protocol configuration across all nodes in a cluster.
3. Additions/Enhancements in RAC (database) What-If command evaluation Using the new What-if command evaluation (-eval) option with srvctl, one can now determine the impact of running the command. This new addition to the srvctl command, will let you simulate the command without it actually being executed or making any changes to the current system. This is particularly useful in a situation when you want to make a change to an existing system and youre not sure of the outcome. Therefore, the command will provide the effect of making the change. The eval option also can be used with crsctl command. For example, if you want to know what will happen if you stop a particular database, you can use the following example: $ ./srvctl stop database d MYDB eval $ ./crsctl eval modify resource <resource_name> -attr value Miscellaneous srvctl improvements There are a few new additions to the srvctl command. The following demonstrates the new addition to stop/start database/instance resources on the cluster: srvctl start database|instance startoption NOMOUNT|MOUNT|OPEN srvctl stop database|instance stopoption NOMOUNT|MOUNT|OPEN The next article will focus on top most developers features on 12c.
Truncate table CASCADE In the previous releases, there wasnt a direct option provided to truncate a master table while it is referred to by the child tables and child records exist. The TRUNCATE TABLE with CASCADE option in 12c truncates the records in the master table and automatically initiates recursive truncate on child tables too, subject to foreign key reference as DELETE ON CASCADE. There is no CAP on the number of recursive levels as it will apply on all child, grand child and great grandchild etc. This enhancement gets rid of the prerequisite to truncate all child records before truncating a master table. The newCASCADE clause can also be applied on table partitions and sub-partitions etc. SQL> TRUNCATE TABLE <table_name> CASCADE;
An ORA-14705 error will be thrown if no ON DELETE CASCADE option is defined with the foreign keys of the child tables.
ROW limiting for Top-N result queries There are various indirect approaches/methods exist to fetch Top-N query results for top/bottom rows in the previous releases. In 12c, retrieving Top-N query results for top/bottom rows simplified and become straight forward with the new FETCH FIRST|NEXT|PERCENT clauses. In order to retrieve top 10 salaries from EMP table, use the following new SQL statement:
SQL> SELECT eno,ename,sal FROM emp ORDER BY SAL DESC FETCH FIRST 10 ROWS ONLY;
The following example fetches all similar records of Nth row. For example, if the 10th row has salary of 5000 value, and there are other employees whose salary matches with the Nth value, the will also be fetched upon mentioningWITH TIES clause.
SQL> SELECT eno,ename,sal FROM emp ORDER BY SAL DESC FETCH FIRST 10 ROWS ONLY WITH TIES;
The following example limits the fetch to 10 per cent from the top salaries in the EMP table: SQL> SELECT eno,ename,sal FROM emp ORDER BY SAL DESC FETCH FIRST 10 PERCENT ROWS ONLY;
The following example offsets the first 5 rows and will display the next 5 rows from the table:
SQL> SELECT eno,ename,sal FROM emp ORDER BY SAL DESC OFFSET 5 ROWS FETCH NEXT 5 ROWS ONLY;
All these limits can be very well used within the PL/SQL block too.
BEGIN SELECT sal BULK COLLECT INTO sal_v FROM EMP FETCH FIRST 100 ROWS ONLY; END;
Miscellaneous SQL*Plus enhancements Implicit Results on SQL*Plus: SQL*Plus in 12c returns results from an implicit cursor of a PL/SQL block without actually binding it to a RefCursor. The new dbms_sql.return_result procedure will return and formats the results ofSELECT statement query specified within PL/SQL block. The following code descries the usage: SQL> CREATE PROCEDURE mp1 as res1 sys_refcursor; BEGIN open res1 for SELECT eno,ename,sal FROM emp; dbms_sql.return_result(res1); END;
When the procedure is executed, it return the formatted rows on the SQL*Plus. Display invisible columns: In Part 1 of this series, I have explained and demonstrated about invisible columns new feature. When the columns are defined as invisible, they wont be displayed when you describe the table structure. However, you can display the information about the invisible columns by setting the following on the SQL*Plus prompt: SQL> SET COLINVISIBLE ON|OFF
The above setting is only valid for DESCRIBE command. It has not effect on the SELECT statement results on the invisible columns.
Session level sequences A new SESSION level database sequence can be created now in 12c to support the session level sequence values. These types of sequences are most useful and suitable on global temporary tables that have session level existence. Session level sequences produce a unique range of values that are limited within the session, not across the sessions. Once the session ends, the state of the session sequences also goes away. The following example explains creating a session level sequence:
SQL> CREATE SEQUENCE my_seq START WITH 1 INCREMENT BY 1 SESSION; SQL> ALTER SEQUENCE my_seq GLOBAL|SESSION;
The CACHE, NOCACHE, ORDER or NOORDER clauses are ignored for SESSION level sequences.
WITH clause improvements In 12c, you can have faster running PL/SQL function/procedure in SQL, that are defined and declared within theWITH clause of SQL statements. The following examples demonstrate how to define and declare a procedure or function within the WITH clause: WITH PROCEDURE|FUNCTION test1 () BEGIN <logic> END; SELECT <referece_your_function|procedure_here> FROM table_name; /
Although you cant use the WITH clause directly in the PL/SQL unit, it can be referred through a dynamic SQL within that PL/SQL unit.
Extended data types In 12c, the data type VARCHAR2, NAVARCHAR2, and RAW size will support up to 32,767 bytes in contrast to 4,000 and 2,000 in the earlier releases. The extended character size will reduce the use of going for LOB data types, whenever possible. In order to enable the extended character size, you will have to set theMAX_STRING_SIZE initialization database parameter to EXTENDED. The following procedure need to run to use the extended data types: 1. Shutdown the database 2. Restart the database in UPGRADE mode 3. Modify the parameter: ALTER SYSTEM SET MAX_STRING_SIZE=EXTENDED; 4. Execute utl32k.sql as sysdba : SQL> @?/rdbms/admin/utl32k.sql 5. Shutdown the database 6. Restart the database in READ WRITE mode In contrast to LOB data types, the extended data types columns in ASSM tablespace management are stored as SecureFiles LOBs, and in non-ASSM tablespace management they stored as BasciFiles LOBs. Note: Once modified, you cant change the settings back to STANDARD.
Of course, every presentation had a caveat: nothing discussed was guaranteed to be in the final product so no business decisions should be made on these dicussions. Since 12c has not been announced yet, that is still true. Anything you read on the internet might be false. Having said that, some of the things coming are pretty cool. Here is my top 10 list. (I provide a link where I can find a decent one.) 1. Pluggable Databases - Pluggable database are a neat feature. Bascially, you create a container database (CDB) that contains all of the oracle level data and data dictionary. You then create pluggable databases (PDB) that contain user data and the user portion of the data dictionary. Since the PDB files contain everything about the user data, you can unplug a PDB from a CDB and plug it into a different CDB and be up in seconds. All that needs to happen is a quick data dictionary update in the CDB. 2. Duplicate Indexes - Create duplicate indexes on the same set of columns. In 11.2 and below, if you try to create an index using the same columns, in the same order, as an existing index, you get an error. In some cases, you might want two different types of index on the same data (such as in a data warehouse where you might want a bitmap index on the leading edge of a set of columns that exists in a btree index). 3. Implicit Result Sets - cretae a procedure, open a ref cursor, return the results. No types, not muss, no mess. Streamlined data access (kind of a catch up to other databases). 4. PL/SQL Unit Security - A role can now be granted to a code unit. That means you can determine at a very fine grain, who can access a sepcific unit of code. 5. MapReduce in the Database - MapReduce can be run from PL/SQL directly in the database. I don't have much more info than that. 6. Interval-Ref Partitions - Can now create a ref partition (to relate several tables with the same partitions) as a sub-partition to the interval type. Ease of use feature. 7. SQL WITH Clause Enhancement - I want to see some examples of this one. In 12c, you can declare PL/SQL functions in the WITH Clause of a select statement. 8. Catch up with MySQL - Some catch up features: INDENTITY columns (auto-sequence on a PK), can now use a sequence as a DEFAULT column value, (there's another that I cannot remember right now). 9. 32k VARCHAR2 Support - Yes, 32k varchar2 in the database. Stored like a CLOB. 10. Yeah - Booleans in SQL (sort of) - You can use booleans values in dynamic PL/SQL. Still no booleans as database types. That's about it for my top 10. There was a lot more info at OOW and, like I said above, I plan to blog some more on these topics. If anyone finds a good link with more information about these topics, please leave a comment. I'll update the post. I would love to see some real examples of the PL/SQL improvements. Take care, LewisC
The download consists of two zip files for the database, and another two files for the Grid Infrastructure installation if you want to use ASM or if you are installing Oracle RAC. In my test environment, running Oracle Linux 5 update 7, I quickly installed Grid Infrastructure, configured my ASM storage and installed the Database Software, and followed this by creating a new database. I did all of this using two separate users, grid user owning the Grid Infrastructure home and oracle as the Database software owner. All was done in less than an hour and I was impressed with the new installer and pleased to see that it is kind of similar to the 11g installer. I found it easy to use and all the steps I performed just worked, apart from the pre-requisite check stating I do not have enough swap space, which did not bother me too much in my test lab and I ignored and completed the rest of the steps. I noticed there are already a few installation guides and detailed steps posted on the web and I do recommend that if you looking for more details on the installation process that you have a look at these excellent guides from Tim Hall and Yury Velikanov . And, as always, make sure you review the Oracle Installation guides and ensure you follow all the required pre-requisite steps. Over the next few weeks I, along with many other DBAs, will be testing out the new 12c Database and all its new features. But I would like to share my initial testing of three new features introduced in RMAN which is one of my favorite utilities: 1. Running SQL commands in RMAN without SQL keyword One of the new features for RMAN introduced in 12c is the ability to run SQL commands without the SQL keyword. I even found SQL code block execution worked, which surprised me a little. Below is a basic example: oracle@dbvlin603[/home/oracle]: rman Recovery Manager: Release 12.1.0.1.0 - Production on Wed Jul 3 17:37:57 2013 Copyright (c) 1982, 2013, Oracle and/or its affiliates. All rights reserved. RMAN> connect target / connected to target database: TESTDB (DBID=2602403303) using target database control file instead of recovery catalog RMAN> create table test (id number); Statement processed RMAN> select * from test; no rows selected RMAN> insert into test values (1); Statement processed
1 RMAN> begin 2> for c1 in 1..20 loop 3> insert into test values (c1); 4> end loop; 5> end; 6> / Statement processed RMAN> select count(1) from test; COUNT(1) ---------21 RMAN> rollback; Statement processed RMAN> select * from test; no rows selected RMAN> drop table test purge; Statement processed RMAN> select * from test; RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of sql statement command at 07/03/2013 19:07:24 ORA-00942: table or view does not exist RMAN> As you can see above, using SQL in RMAN can be useful and will open up many possibilities. 2. Refresh a single datafile on the primary from the standby (or standby from primary) The second option, which I think is an excellent new feature, makes restoring specific datafiles from a standby database easy. By using the new FROM SERVICE clause in the RESTORE DATAFILE command, in effect your standby database is your backup and the restore is done via the network. This method can also make use of the SECTION SIZE clause as well as encryption and compressed backup sets. Below is an example I ran using 12c Standard Edition. My primary and standby database is called testdb and I am using a service name called testdbdr which is pointing to my standby database. In this example I am restoring datafile 6 from the standby database. oracle@dbvlin603[/home/oracle]: rman Recovery Manager: Release 12.1.0.1.0 - Production on Wed Jul 3 23:41:44 2013
Copyright (c) 1982, 2013, Oracle and/or its affiliates. RMAN> connect target / connected to target database: TESTDB (DBID=2602403303) RMAN> select file#, name from v$datafile;
using target database control file instead of recovery catalog FILE# NAME ---------------------------------------------------------------------------------------1 +DATA/TESTDB/DATAFILE/system.258.819075077 3 +DATA/TESTDB/DATAFILE/sysaux.257.819075011 4 +DATA/TESTDB/DATAFILE/undotbs1.260.819075143 6 +DATA/TESTDB/DATAFILE/users.259.819075141 RMAN> alter database datafile 6 offline; Statement processed RMAN> restore datafile '+DATA/TESTDB/DATAFILE/users.259.819075141' from service testdbdr using compressed backupset; Starting restore at 03/07/2013:23:46:38 using channel ORA_DISK_1 channel ORA_DISK_1: starting datafile backup set restore channel ORA_DISK_1: using compressed network backup set from service testdbdr channel ORA_DISK_1: specifying datafile(s) to restore from backup set channel ORA_DISK_1: restoring datafile 00006 to +DATA/TESTDB/DATAFILE/users.259.819075141 channel ORA_DISK_1: restore complete, elapsed time: 00:00:03 Finished restore at 03/07/2013:23:46:42 RMAN> select name, status from v$datafile; NAME ---------------------------------------------+DATA/TESTDB/DATAFILE/system.258.819075077 +DATA/TESTDB/DATAFILE/sysaux.257.819075011 +DATA/TESTDB/DATAFILE/undotbs1.260.819075143 +DATA/TESTDB/DATAFILE/users.259.819075141 RMAN> recover datafile 6; Starting recover at 03/07/2013:23:47:14 using channel ORA_DISK_1 starting media recovery STATUS -------SYSTEM ONLINE ONLINE RECOVER
archived log for thread 1 with sequence 5 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_26/thread_1_seq_5.257.819151251 archived log for thread 1 with sequence 6 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_26/thread_1_seq_6.258.819151417 archived log for thread 1 with sequence 7 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_26/thread_1_seq_7.259.819156941 archived log for thread 1 with sequence 8 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_28/thread_1_seq_8.260.819244859 archived log for thread 1 with sequence 9 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_29/thread_1_seq_9.261.819352823 archived log for thread 1 with sequence 10 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_29/thread_1_seq_10.262.819411105 archived log for thread 1 with sequence 11 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_06_30/thread_1_seq_11.263.819468251 archived log for thread 1 with sequence 12 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_07_01/thread_1_seq_12.264.819656061 archived log for thread 1 with sequence 13 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_07_02/thread_1_seq_13.265.819756027 archived log for thread 1 with sequence 14 is already on disk as file +FRA/TESTDB/ARCHIVELOG/2013_07_03/thread_1_seq_14.266.819842455 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_26/thread_1_seq_5.257.819151251 thread=1 sequence=5 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_26/thread_1_seq_6.258.819151417 thread=1 sequence=6 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_26/thread_1_seq_7.259.819156941 thread=1 sequence=7 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_28/thread_1_seq_8.260.819244859 thread=1 sequence=8 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_29/thread_1_seq_9.261.819352823 thread=1 sequence=9 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_29/thread_1_seq_10.262.819411105 thread=1 sequence=10 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_06_30/thread_1_seq_11.263.819468251 thread=1 sequence=11 archived log file name=+FRA/TESTDB/ARCHIVELOG/2013_07_01/thread_1_seq_12.264.819656061 thread=1 sequence=12 media recovery complete, elapsed time: 00:00:15 Finished recover at 03/07/2013:23:47:36 RMAN> alter database datafile 6 online; Statement processed I now have a fully recovered datafile, and all by using my standby database as source for the restore.
3. Rolling forward/Synchronizing a standby database The third new RMAN option I would like to highlight is the rolling forward of a standby database by making use of incremental backups directly from the primary database. This used to be a long manual process but can now be done via a quick and easy command. This option is especially useful if you are running into an
unrecoverable archive log gap. Instead of rebuilding the standby, you can make use of this recovery command that will use incremental backups from the primary to update the standby. This method also makes use of the FROM SERVICE command, and as with the restoring of files across the network, the section size, encryption and compressed backupsets can be specified. Below is an example using this feature in the same Standard Edition environment. In this I am connecting to my Standby database with RMAN and then executing the recover command using the primary database service testdb_primary: oracle@dbvlin604[/usr/local/dbvisit/standby]: rman Recovery Manager: Release 12.1.0.1.0 - Production on Thu Jul 4 00:39:18 2013 Copyright (c) 1982, 2013, Oracle and/or its affiliates. All rights reserved. RMAN> connect target / connected to target database: TESTDB (DBID=2602403303, not open) RMAN> recover database from service testdb_primary using compressed backupset; Starting recover at 04/07/2013:00:40:30 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=14 device type=DISK channel ORA_DISK_1: starting incremental datafile backup set restore channel ORA_DISK_1: using compressed network backup set from service testdb_primary destination for restore of datafile 00001: +DATA/TESTDB/DATAFILE/system.268.819081207 channel ORA_DISK_1: restore complete, elapsed time: 00:00:15 channel ORA_DISK_1: starting incremental datafile backup set restore channel ORA_DISK_1: using compressed network backup set from service testdb_primary destination for restore of datafile 00003: +DATA/TESTDB/DATAFILE/sysaux.267.819081257 channel ORA_DISK_1: restore complete, elapsed time: 00:00:16 channel ORA_DISK_1: starting incremental datafile backup set restore channel ORA_DISK_1: using compressed network backup set from service testdb_primary destination for restore of datafile 00004: +DATA/TESTDB/DATAFILE/undotbs1.266.819081299 channel ORA_DISK_1: restore complete, elapsed time: 00:00:03 channel ORA_DISK_1: starting incremental datafile backup set restore channel ORA_DISK_1: using compressed network backup set from service testdb_primary destination for restore of datafile 00006: +DATA/TESTDB/DATAFILE/users.265.819081319 channel ORA_DISK_1: restore complete, elapsed time: 00:00:03 starting media recovery media recovery complete, elapsed time: 00:00:01 Finished recover at 04/07/2013:00:41:20 But the interesting point to make with the above is that when I executed the recover standby database command, it still requested an old archive log (sequence# 15): SQL> recover standby database; ORA-00279: change 2097958 generated at 07/03/2013 22:00:51 needed for thread 1 ORA-00289: suggestion : +FRA ORA-15173: entry 'ARCHIVELOG' does not exist in directory 'TESTDB' ORA-00280: change 2097958 for thread 1 is in sequence #15
Which in this case did not exist, as this was the missing or unrecoverable archive log in the example. Investigation showed that my datafiles on the standby server were up to date with latest change, but the standby controlfile was still showing old checkpoint change value. So I recreated the standby controlfile and now the recover standby database command requested the expected archive log: SQL> recover standby database; ORA-00279: change 2103689 generated at 07/04/2013 00:40:38 needed for thread 1 ORA-00289: suggestion : +FRA ORA-15173: entry 'ARCHIVELOG' does not exist in directory 'TESTDB' ORA-00280: change 2103689 for thread 1 is in sequence #21 I was now able to send and apply logs again to the standby database. Now I am using Standard Edition and will run this test later in Enterprise Edition as well, but it seems you still need to recreate the standby controlfile after using this incremental backup option to update the standby database. In summary some of these options are truly powerful and can save the DBA a lot of time especially when working with Standby Databases. Hope you are all enjoying playing with 12c, and all its new features