Scribd Logo
Upload

Welcome to Scribd!

  • M.Tech (Mech.) With 3.5 Years' Exp.: Curriculum Vitae

    Uploaded by

    Andriya Narasimhulu
    83 views3 pages
    This document provides a curriculum vitae for Vemula Vijaya Vani, who has an M.Tech in Mechanical Engineering with 3.5 years of work experience. She completed her B.Tech in Industrial and Production Engineering in 2007 and M.Tech from MD University, Rohtak in 2012. Her M.Tech thesis focused on studying the grindability of Ti-6Al-4V using solid lubricants. She has worked as a faculty member and lecturer at various universities and has skills in CAD, modeling, and programming.

    Original Description:

    Vani Profile

    Original Title

    VV Vani CV

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides a curriculum vitae for Vemula Vijaya Vani, who has an M.Tech in Mechanical Engineering with 3.5 years of work experience. She completed her B.Tech in Industrial and Production Engineering in 2007 and M.Tech from MD University, Rohtak in 2012. Her M.Tech thesis focused on studying the grindability of Ti-6Al-4V using solid lubricants. She has worked as a faculty member and lecturer at various universities and has skills in CAD, modeling, and programming.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    83 views3 pages

    M.Tech (Mech.) With 3.5 Years' Exp.: Curriculum Vitae

    Uploaded by

    Andriya Narasimhulu
    This document provides a curriculum vitae for Vemula Vijaya Vani, who has an M.Tech in Mechanical Engineering with 3.5 years of work experience. She completed her B.Tech in Industrial and Production Engineering in 2007 and M.Tech from MD University, Rohtak in 2012. Her M.Tech thesis focused on studying the grindability of Ti-6Al-4V using solid lubricants. She has worked as a faculty member and lecturer at various universities and has skills in CAD, modeling, and programming.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    M.Tech (Mech.) with 3.5 years Exp.

    CURRICULUM VITAE
    VEMULA VIJAYA VANI W/o-ANDRIYA NARASIMHULU Sex- Female DOB- 05/01/1986 Marital Status- Married Languages known-Telugu, English, Hindi Flat No.:290, Pkt-A Sect-17, Dwarka New Delhi-110078

    Mobile: +91-9582172845/9899518264 Email: [email protected]

    ACADAMIC QUALIFICATION ACADAMICDETAILS PRIOR To M.Tech Year 2012


    2007 2003 2001

    Degree/Exam M.Tech
    B.TechInd.&Prodn. Intermediate State Board (SSC) State Board

    Institute/university MD University, Rohtak


    S.K.University, AP ManikJr.College, KNL, AP St.Joseph School, KNL, AP

    Marks (%) 75.4% (Dist.)


    80.04% (DISTINCTION) 90.02% (DISTINCTION) 88% (DISTINCTION)

    Courses Done Casting, Metal Forming Analysis, Welding Technology, Mechatronics, Design of Production Control of Production systems, Automation in Manufacturing, Metal Cutting, Quality control, CAD/CAM, Principles of Management M.Tech THESIS WORK
    Title - Study on Grindability of Ti-6Al-4V using Solid Lubricants Supervisors Dr. Tasmeem Ahmed Khan

    Description Titanium is Hard-to-machine materials as Ti-alloy (Ti-6Al-4V) has low thermal conductivity, high chemical reactivity at elevated temperature and low modulus of elasticity. After alloying its machinability decreases. But due to Ti-alloys low thermal conductivity heat accumulation occurs on the surface which may lead to residual tensile stress, surface cracks and redeposition on the ground surface as a result the fatigue life of the product decreases. Grinding is a high specific energy consuming process. At the time of grinding there are three types of actions taking place in between the grinding wheel and the surface to be ground. These are shearing, ploughing, and rubbing for different conditions of grit shape. Shearing is the process of metal removal, and the other two actions are unwanted during the process and results frictional loss. Hence to decrease the specific energy of grinding solid lubricants can be used which will reduce the frictional losses (rubbing component) and thereby decrease the grinding forces.

    B.Tech THESIS WORK


    Title - Study of Heuristic Approach for Job Shop Scheduling Problem Supervisors Dr. K.Meenakshi Reddy

    Description Heuristic approach for condition based job shop schedulingproblem is to be done and have considered two scheduling problems and we select which one is the best method based on idle time and total elapsed time.

    M.Tech (Mech.) with 3.5 years Exp.


    PUBLICATIONS
    1.

    Vijaya Vani Vemula, Tasmeem (2012), Study on Grindability of Ti-6Al-4V using solid lubricants International Journal of Engineering Science and Technology, Vol X(XX) pp.1-9

    PRESENTATIONS Presented a technical paper on Ant Colony System: A coordinative Learning Approach to the Travelling Salesman Problem in a National Level Students Technical Symposium held at CBIT, HYD.

    WORK EXPERIENCE
    Worked as a Assistant Professor in Lingayas University, Faridabad, from August 2012 to January 2013 Worked as Lecturer in Echelon Institute of Technology, Faridabad from July 2011 to Aug 2012 Worked as a guest faculty in GB Pant Engineering College, Okhla from Junuary 2011 to May 2011 Worked as a Assistant professor in MLR Institute of Technology, Dundhigal, Hyderabad from 20th July 2007 to 10th June 2009 Subjects Handled: Thermodynamics, Foundation of Solid Mechanics, Aircraft Production Technology, Engineering Drawing, Manufacturing Technology, and Strength of Materials. Labs Handled: Propulsion Lab, Mechanics of Solids, Production Technology, CAD Lab

    TECHNICAL SKILLS

    Operating Systems: Windows XP and Windows Vista, Win7,Win 8


    Programming- C Modelling-PRO-E Part Modeling, PRO-E Manufacturing(NC code generation), AUTO CAD, CATIA, ANSYS

    ACHIEVEMENTS
    Stood school first in SSC Class first in Inter Among top 10 in our B.Tech class of 67 students

    OTHER INTERESTS
    Reading Bible and attending church Watching documentary videos in Discovery, National Geography channels Listening radio, Cooking and Travelling

    DECLARATION
    I hereby declare that all the information furnished above is true to the best of my knowledge.

    Place:New Delhi Date: 10/12/2013

    Yours Sincerely (VEMULA VIJAYA VANI)

    M.Tech (Mech.) with 3.5 years Exp.


    REFERENCES

    Suresh Babu Muttana Scientist C Collaborative Automotive R&D (CAR) Technology Information Forcasting & Assessment Council (TIFAC) Vishwakarma Bhavan, Shaheed Jeet Singh Marg New Delhi - 110 016 Contact : 011- 42525776, Fax : 011- 26591158 Mobile : + 91- 9971046796 E-mail ID: [email protected]

    Shri. Prashant H Kumar Deputy General Manager Indian Telecom Services Railway Electrification, BSNL UD-12, P & T Colony Devnagar Kharolbagh New Delhi- 110 005 Mobile : 09868136446 E- mail ID: [email protected]

    MRs P Esther Kamala Assistant Director IRP Division- Central Electricity Authority II Floor, Sewa Bhavan Sector 1, R K Puram New Delhi-110066 Office Ph: 01126732264 Mobile No.: +91 9899029857 E-mail ID: [email protected]

    You might also like