Professional Documents
Culture Documents
Leutert Catalog SlicklineTools
Leutert Catalog SlicklineTools
The Wireline Tool String is necessary for the efficient surface control during the running and pulling operations on slickline of sub surface controlled devices. An assembly of wireline tools connected to the wireline is used to deliver surface control impacts (jar action) either upwards or downwards to manipulate devices within the well bore. A standard set of wireline tool string typically consist of:
r r
Rope Socket
r r r
Wireline Socket (Rope Socket) for attaching the wireline to the tool string. Wireline Stem (Sinker Bar) for adding weight to sink the tool in the well bore against the well pressure and different gravity fluids encountered. Wireline Jars (Spang Link Jar) for securing the hammering effect by upward or downward movement. Wireline Knuckle Joint for obtaining flexibility through the tool string. Wireline running or pulling tool for running and retrieving devices from the well bore.
Stem
Stem
Customer to choose the type of connection they want to use in wireline tool string. Sucker rod threads are machined on wireline tools as per API 11B. These are economical cost wise. UN threads are also machined on wireline tools and are interchangeable with Sucker Rod Threads but are shorter in length. These are also economical cost wise. Quick Lock Connector as the name suggest is a quick connect and quick disconnect connection, which is used in place of screwed connection. It has many advantages over screwed connection: It is quarter turn connection. It is stronger than screwed connection. It has three impact load bearing surfaces in each direction, which make it safer for heavy and prolonged wireline operations. r It is safer and simpler and can be released with a screwdriver.
r r
Mechanical Jars
06/2010
Rope Socket
Wedge Type
Spool Type
Slip Type
Stem
Leaded Stem
Roller Stem
Tubular Jar
Hydraulic Jar
Mechanical Jars
Spring Jar
Wireline Accelerator
Shock Absorber
Knuckle Joint
Knuckle Jar
Wireline Toolstring
Tubing Swage
Blind Box
Wireline Overshot
Releasable Overshot
Impression Block
Wireline Spear
Fluted Centralizer
GS Pulling Tool
GU Shear up Adapter
JD Pulling Tool
JU Pulling Tool
R Pulling Tool
S Pulling Tool
Sample Bailer
Hydrostatic Bailer
PX Running Tool
B Shifting Tool
Pinning Tool
Releasing Tool
Wireline Cutter
Wireline Snipper
Tubing Broach
Wireline Wirefinder
Go-devil Flat Bottom Wire Scratcher (Flare Type) Wire Scratcher Wireline Grab Center Spear Wireline Retriever
Roller Go-devil
Wireline Crossover
Rope Socket
Rope Sockets are used as a means to connect wireline to the tool string. Rope Sockets are available in 4 types as under:
Wedge Type Size (in.) 1-1/8 1-1/2 1-1/2 1-7/8 1-7/8 2-1/8 2-1/2 Max. OD (in.) 1.125 1.500 1.500 1.875 1.875 2.125 2.500 F/N OD (in.) 0.875 1.375 1.375 1.750 1.750 1.750 2.312 Thread Conn. Box (in. TPI) 5/8 - 11 UNC 15/16 - 10 UN 1-1/16 - 10 UN 15/16 - 10 UN 1-1/16 - 10 UN 1-1/16 - 10 UN 1-9/16 - 10 UN Wire size (in.) 0.066 / 0.092 0.092 / 0.108 0.092 / 0.108 0.092 / 0.108 0.092 / 0.108 0.092 / 0.108 0.092 / 0.108
Spool Type Size (in.) 1 1-1/4 1-1/2 1-7/8 2-1/8 2-1/2 Max. OD (in.) 1.000 1.250 1.500 1.750 2.125 2.500 F/N OD (in.) 0.875 1.187 1.375 1.875 1.750 2.312 Thread Conn. Box (in. TPI) 5/8 - 11 UNC 15/16 - 10 UN 15/16 - 10 UN 1-1/16 - 10 UN 1-1/16 - 10 UN 1-9/16 - 10 UN Wire size (in.) 0.066 0.092 0.066 0.092 0.066 0.092 0.066 0.092 0.092 0.092
Wedge Type
Spool Type
Slip Type Size (in.) 1-1/2 1-7/8 2-1/8 2-1/2 Max. OD (in.) 1.500 1.875 2.125 2.500 F/N OD (in.) 1.375 1.750 1.750 2.312 Thread Conn. Box (in. TPI) 15/16 - 10 UN 1-1/16 - 10 UN 1-1/16 - 10 UN 1-9/16 - 10 UN Wire size (in.) 0.187 0.187 0.187 0.187
Clamp Type Size (in.) 1-1/4 1-1/2 1-7/8 2-1/2 Max. OD (in.) 1.250 1.500 1.875 2.500 F/N OD (in.) 1.187 1.375 1.750 2.312 Thread Conn. Box (in. TPI) 15/16 - 10 UN 15/16 - 10 UN 1-1/16 - 10 UN 1-9/16 - 10 UN Wire size (in.) 0.125 0.125 / 0.187 0.187 0.250 Slip Type Clamp Type
06/2010
Wireline Stems Size (inch) 1 1-1/4 1-1/2 1-7/8 2-1/8 2-1/2 Max. OD (inch) 1.000 1.250 1.500 1.875 2.125 2.500 F/N OD (inch) 0.875 1.187 1.375 1.750 1.750 2.312 Thread Connection Pin X Box (inch TPI) 5/8-11 UNC 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN
06/2010
Lead Filled Stems Size (inch) 1-1/4 1-1/2 1-7/8 2-1/8 Max. OD (inch) 1.250 1.500 1.875 2.125 F/N OD (inch) 1.187 1.375 1.750 1.750 Thread Connection Pin X Box (inch TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN
Leaded Stem
06/2010
Roller Stem
Roller Stems are used with tool string in deviated wells. Its application is to reduce friction against tubing ID. In assembly of Roller Stems: Teflon / Alloy Steel Rollers (suitable for high temperature / H2S Service), specialty bearings are assembled with body. Roller Stems are available in various Lengths, ODs, Connections and Rollers dia.
Roller Stems Size (inch) 1-1/2 1-7/8 2-1/2 1-1/2 1-7/8 2-1/2 Max. OD (inch) 2.00 2.50 3.00 2.00 2.50 3.00 F/N OD (inch) 1.375 1.750 2.312 1.375 1.750 2.312 Thread Connection Pin X Box (in. TPI) 15/16-10 UN 1-1/16-10 UN 1-9/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-9/16-10 UN No. of wheels 3 3 3 4 4 4
Roller Stem
06/2010
Wireline Link Jars Size (inch) 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-7/8 1-7/8 1-7/8 2-1/8 2-1/2 Max. OD (inch) 1.000 1.000 1.250 1.250 1.250 1.500 1.500 1.875 1.875 1.875 2.125 2.500 F/N OD (inch) 0.875 0.875 1.187 1.187 1.187 1.375 1.375 1.750 1.750 1.750 1.750 2.312 Thread Conn. Pin X Box (in. TPI) 5/8-11 UNC 5/8-11 UNC 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN Stroke (inch) 20 24 20 24 30 20 24 20 24 30 30 24
06/2010
Wireline Tubular Jars Size (inch) 1 1 1-1/8 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-3/4 1-3/4 1-7/8 1-7/8 2-1/8 2-1/8 2-1/8 2-1/2 2-1/2 Max. OD (inch) 1.000 1.000 1.125 1.250 1.250 1.250 1.500 1.500 1.500 1.750 1.750 1.875 1.875 2.125 2.125 2.125 2.500 2.500 F/N OD (inch) 0.875 0.875 0.875 1.187 1.187 1.187 1.375 1.375 1.375 1.375 1.375 1.750 1.750 1.750 1.750 1.750 2.312 2.312 Thread Conn. Pin X Box (in. TPI) 5/8-11 UNC 5/8-11 UNC 5/8-11 UNC 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN 1-9/16-10 UN Stroke (inch) 18 20 18 20 24 30 20 24 30 20 30 20 30 20 24 30 24 30
Tubular Jar
06/2010
Wireline Hydraulic Jars Size (inch) 1-1/8 1-1/4 1-1/2 1-3/4 2-1/8 Max. OD (inch) 1.125 1.250 1.500 1.750 2.125 F/N OD (inch) 0.875 1.187 1.375 1.375 1.750 Thread Conn. Pin X Box (in. TPI) 5/8-11 UNC 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-3/16-10 UN Stroke (inch) 6.750 9.250 9.187 10.000 11.625
Hydraulic Jar
06/2010
Wireline Spring Jars Size (inch) 1-1/2 1-7/8 2-1/2 Max. OD (inch) 1.500 1.875 2.500 F/N OD (inch) 1.375 1.750 2.312 Thread Connection Pin X Box (in. TPI) 15/16-10 UN 1-1/16-10 UN 1-9/16-10 UN Stroke (inch) 12 12 12
Spring Jar
06/2010
Wireline Accelerator
Wireline Accelerator is used to run with Hydraulic Jar to reduce shocks at Rope Socket to avoid pulling of wire out of socket and accelerate movement of stem, to achieve effective jarring. Accelerator facilitate constant pull at the time of opening of Hydraulic Jar.
Wireline Accelerator Size (inch) 1-1/2 1-7/8 2-1/8 2-1/2 3 Max. OD (inch) 1.500 1.875 2.125 2.500 3.000 F/N OD (inch) 1.375 1.750 1.750 2.312 2.312 Thread Conn. Pin X Box (in. TPI) 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN 1-9/16-10 UN Length (inch) 22 26 38 35 38
Wireline Accelerator
06/2010
Wireline Shock Absorber Size (inch) 1.50 1.75 2.00 F/N OD (inch) 1.375 1.375 1.375 Top Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN Bottom Connection Box (in. TPI) - 16 UNF - 16 UNF - 16 UNF
Shock Absorber
06/2010
Wireline Knuckle Joints Size (inch) 1-1/8 1-1/4 1-1/2 1-7/8 2-1/8 2-1/2 Max. OD (inch) 1.125 1.250 1.500 1.875 2.125 2.500 F/N OD (inch) 0.875 1.187 1.375 1.750 1.750 2.312 Thread Connection Pin X Box (in. TPI) 5/8-11 UNC 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN
Knuckle Joint
06/2010
Wireline Knuckle Jars Size (inch) 1-1/4 1-1/2 1-1/2 1-7/8 2-1/8 2-1/2 Max. OD (inch) 1.250 1.500 1.500 1.875 2.125 2.500 F/N OD (inch) 1.187 1.375 1.375 1.750 1.750 2.312 Thread Connection Pin X Box (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN Stroke (inch) 2 2 4 6 6 6
Knuckle Jar
06/2010
Quick Lock Couplings Size (inch) 1-1/4 1-1/2 1-7/8 2-1/2 Max. OD (inch) 1.250 1.500 1.875 2.500 F/N OD (inch) 1.187 1.375 1.750 2.312 Thread Connection Pin X Box (in. TPI) 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-9/16-10 UN
06/2010
Tubing Swage
Tubing Swages are used to remove large obstructions and restore light collapse in the tubing. This allows smooth running of tool string in well bore. The OD of tubing swage should be equal to tubing drift ID. It should be run with up stroke jar to enable operator to take it out of tubing if swage is jammed.
Tubing Swages Size (inch) 1-1/2 2 2-1/2 3 4 Max. OD (inch) 1.521 1.906 2.344 2.937 3.720 F/N OD (inch) 1.187 1.375 1.375 1.750 1.750 Thread Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN
Tubing Swage
06/2010
Gauge Cutter
Gauge/Paraffin Cutters are run in hole before running sub surface equipment. Gauge/Paraffin Cutters are used to check if sub surface equipment can pass freely thru tubing & there are no obstructions and to locate top of nipple. The bottom of Gauge/Paraffin Cutter is suitable to cut paraffin, scale and any other obstacles in tubing.
OD Range (inch)* 0.905 1.575 1.655 2.265 2.323 2.520 2.598 2.953 2.992 3.900 5.750 6.151
Tubing Gauge / Paraffin Cutters F/N OD (inch) Thread Connection Pin (in. TPI) 0.875 5/8-11 UNC 1.375 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN 2.312 1-1/16-10 UN 2.312 1-9/16-10 UN
* Tubing Gauge / Paraffin Cutter are available in MM increments within the specified O.D. ranges. When ordering, specify required O.D. in MM ( Inches x 25.4 = MM)
06/2010
Blind Box
Blind Boxes are used when heavy downward jarring is required to dislodge a fish or push something down the hole. Bottom surface of Blind Box is flat and hardened to reduce wear and damage.
OD Range (inch)* 1.187 1.250 1.625 1.375 2.625 2.750 3.500 4.625 5.250 5.750
Blind Boxes F/N OD (inch) Thread Connection Pin (in. TPI) 1.187 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN 2.312 1-9/16-10 UN 2.312 1-9/16-10 UN Blind Box
* Blind Boxes are available in MM increments within the specified O.D. ranges. When ordering , specify required O.D. in MM ( Inches x 25.4 = MM)
06/2010
Tubing End Locators Size (inch) 2 2-1/2 3 4 Max. OD (inch)* 1.750 2.500 3.750 F/N OD (inch) 1.375 1.375 2.312 Top Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN 1 - 9/16-10 UN Bottom Connection Pin (in. TPI) 1 - 11-1/2 NPT 1 - 11-1/2 NPT 1 - 11-1/2 NPT
06/2010
Wireline Overshot
Wireline Overshots are used to engage sub-surface tools in various situations as determined by operator. Overshots consist of hardened steel slips with sharpened upward teeth, engage the fish. The tapered ID of skirt and upward pull / jarring set the slips tighter.
Wireline Overshots Size (inch) 1.75 Part No. 351721 Max. OD F/N OD (inch) (inch) 1.750 1.375 Thread Conn. Pin (in. TPI) 15/16-10 UN To catch Dias (inch) 0.50 0.75 0.75 1.00 1.00 1.25 0.50 0.75 0.75 1.00 1.00 1.25 1.25 1.50 1.25 1.50 1.75 2.00 0.50 0.95 0.95 1.40 1.40 1.85 1.85 2.30 2.30 2.75 Wireline Overshot
2.625
352632
2.625
1.750
1-1/16-10 UN
3.800
353846
3.800
2.312
1-9/16-10 UN
Other sizes available on request. Each Assembly is complete with one set of slips. Please specify required size when ordering.
06/2010
tohsrevO
elbasaeleR
Impression Block
Impression Blocks are used during fishing operations to check the shape / size of the top of fish and to determine tool appropriate for fishing operation. Lead is filled within body of Impression Block and a pin is fixed thru body of Impression Block and lead to stabilize lead within body.
OD Range (inch)* 1.000 1.230 1.375 1.410 1.750 2.250 2.625 2.812 3.500 4.625 5.500 5.750
Impression Blocks F/N OD (inch) Thread Connection Pin (in. TPI) 0.875 5/8-11 UNC 1.187 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN 2.312 1-9/16-10 UN 2.312 1-9/16-10 UN Impression Block
* Impression Blocks are available in MM increments within the specified O.D. ranges. When ordering, specify required O.D. in MM ( Inches x 25.4 = MM)
06/2010
Magnetic Fishing Tool Size (inch) 1-1/4 1-1/2 2 2-1/2 2-1/2 3 3-1/2 3-3/4 Max. OD (inch) 1.23 1.43 1.87 2.18 2.29 2.84 3.50 3.75 F/N OD (inch) 0.875 1.187 1.375 1.375 1.375 2.312 2.312 2.312 Thread Connection Pin (in. TPI) 5/8-11 UNC 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN
06/2010
Wireline Fishing Magnet Size OD (inch) 1.50 1.75 2.25 2.65 3.65 F/N OD (inch) 1.375 1.375 1.375 1.375 1.750 Thread Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN To pull (lbs) 11 14 15 20 25 50 50 75 150 250 Wireline Fishing Magnet
06/2010
Wireline Spear
Wireline Spears are used in general fishing operations when wire is bundled up very badly and two prong wireline grab can not engage it.
Wireline Spears Size (inch) 1-1/2 1-1/2 1-1/2 1-1/2 1-3/4 2-1/4 2-3/4 3-1/2 Max. OD (inch) 1.50 1.50 1.50 1.50 1.75 2.25 2.75 3.50 F/N OD (inch) 1.375 1.375 1.375 1.375 1.375 1.750 1.750 2.312 Thread Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN To catch Dias (inch) 0.50 0.75 0.75 1.00 1.00 1.25 1.25 1.50 1.50 1.75 1.75 2.25 2.25 2.75 2.75 3.50
Wireline Spear
06/2010
Fluted Centralizer
Fluted Centralizers are used in deviated wells to ensure that tool string is at centralized position.
Fluted Centralizers Size (inch) 1-1/2 2-1/2 3-1/2 6 Max. OD (inch) 1.50 2.50 3.50 6.00 F/N OD (inch) 1.187 1.750 2.312 2.312 Thread Connection Pin X Box (in. TPI) 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-9/16-10 UN
Fluted Centralizer
06/2010
Shear Up Adapter GU
GS Pulling Tools are used to unlock and pull various down hole equipment with Internal Fishing Necks. These tools are designed to shear with Jar Down action. With addition of GU Adapter, complete assembly is changed to GR Shear Up Tool.
Shear Up Adapter GU Size (inch) 1-1/2 2 2-1/2 3, 3-1/2, 4 Actual OD (inch) 1.470 1.812 2.250 2.718 F/N OD (inch) 1.187 1.375 1.750 2.312 Thread Connection Pin X Box (inch TPI) 15/16-10 15/16-10 15/16-10 1-1/16-10
GU Shear Up Adapter
06/2010
GS Pulling Tools Size (inch) 1-1/4 1-1/2 1-3/4 2 2 2-1/2 2-1/2 3 3-1/2 4 5 7 7 Prong Thread 3/8-16 1/2-13 1/2-13 1/2-13 5/8-11 5/8-11 5/8-11 1-3/8-12 2-1/8-12 2-1/2-10 3-5/8-10 3-5/8-10 F/N ID Guide (in) 0.880 1.060 1.380 1.380 1.810 1.810 2.310 2.620 3.120 4.000 5.250 5.250 GS Pulling Tool OD (in) 1.160 1.470 1.750 1.810 2.160 2.160 2.720 3.110 3.620 4.500 5.830 5.880 F/N OD (inch) 1.000 1.187 1.375 1.375 1.750 1.750 2.312 2.312 2.312 3.125 3.125 3.125 Top Thread 5/8-11 15/16-10 15/16-10 15/16-10 15/16-10 15/16-10 1-1/16-10 1-1/16-10 1-1/16-10 1-1/16-10 1-1/16-10 1-1/16-10 Reach (inch) 1.08 1.62 1.62 1.62 1.62 1.62 1.62 1.62 1.62 1.82 1.86 1.86
GS Pulling Tool
06/2010
JU Pulling Tools, Type JUC Size (inch) 1-1/4 1-1/2 2 2-1/2 3 4 1-1/2 2 2-1/2 3 Max. OD (inch) 1.250 1.422 1.859 2.250 2.812 3.750 1.422 1.859 2.250 2.812 F/N OD (inch) 1.187 1.187 1.375 1.375 1.750 2.312 1.187 1.375 1.375 1.750 Pulls Neck OD (inch) Connecting Thread Pin Prong Connecting Thread Box 1/4-20 1/2-13 1/2-13 1/2-13 5/8-11 1-1/4-12 1/2-13 1/2-13 1/2-13 5/8-11 Reach* (inch) 1.937 1.093 1.437 1.312 1.437 3.375 1.843 2.125 2.187 2.125
1.937 15/16-10 1.187 15/16-10 1.375 15/16-10 1.750 15/16-10 2.312 15/16-10 3.125 1-1/6-10 JD Pulling Tools, Type JUS 1.187 15/16-10 1.375 15/16-10 1.750 15/16-10 2.312 15/16-10
JU Pulling Tool
JD Pulling Tools, Type JDC Size (inch) 1-1/4 1-3/8 1-1/2 2 2-1/2 3 3 4 1-1/4 1-1/2 1-5/8 2 2-1/2 3 2 3 Max. OD (inch) 1.291 1.375 1.422 1.859 2.250 2.796 2.796 3.750 1.291 1.422 1.625 1.859 2.250 2.812 1.859 2.812 F/N OD (inch) 1.187 1.187 1.187 1.375 1.375 1.750 1.750 2.312 1.187 1.187 1.187 1.375 1.375 1.750 1.375 1.750 Pulls Neck OD (inch) Connecting Thread Pin Prong Connecting Thread Box 1/4-20 N/A 1/2-13 1/2-13 1/2-13 1/2-13 and 5/8-11 5/8-11 1-1/4-12 N/A 1/2-13 1/2-13 1/2-13 1/2-13 5/8-11 1/2-13 5/8-11 Reach* (inch) 1.937 1.875 1.093 1.437 1.312 1.437 0.687 2.312 2.687 1.843 1.843 2.250 2.187 2.125 2.812 2.609 JD Pulling Tool 06/2010
0.875 15/16-10 1.000 15/16-10 1.187 15/16-10 1.375 15/16-10 1.750 15/16-10 2.312 15/16-10 2.312 15/16-10 3.125 1-1/6-10 JD Pulling Tools, Type JDS 0.875 15/16-10 1.187 15/16-10 1.187 15/16-10 1.375 15/16-10 1.750 15/16-10 2.312 15/16-10 JD Pulling Tools, Type JDL 1.375 15/16-10 2.312 15/16-10
* Reach is the distance from the core to the engaging shoulder of the dogs. Other core length / ODs available on request. Subject to change without notice
Either of above tools can be changed to other types by changing core. All other parts of above tools are interchangeable .
R Pulling Tools, Type RB Size (inch) 1-1/4 1-1/2 1-3/4 2 2-1/2 3 3-1/2 4 Max. OD (inch) 1.220 1.430 1.484 1.770 2.180 2.740 3.110 3.670 F/N OD (inch) 1.000 1.188 1.188 1.375 1.375 2.312 2.312 2.312 Pulls Neck OD (inch) 1.000 1.188 1.188 1.375 1.750 2.312 2.750 3.125 Top Thread 5/8-11 15/16-10 15/16-10 15/16-10 15/16-10 1-1/16-10 1-1/16-10 1-1/16-10 Reach (inch) 1.219 1.264 1.050 1.219 1.203 1.297 1.350 1.490
R Pulling Tools, Type RS Size (inch) 1-1/4 1-1/2 1-3/4 2 2-1/2 3 3-1/2 4 Max. OD (inch) 1.220 1.430 1.562 1.770 2.180 2.740 3.110 3.718 F/N OD (inch) 1.000 1.188 1.188 1.375 1.375 2.312 2.312 2.312 Pulls Neck OD (inch) 1.000 1.188 1.188 1.375 1.750 2.312 2.750 3.125 Top Thread 5/8-11 15/16-10 15/16-10 15/16-10 15/16-10 1-1/16-10 1-1/16-10 1-1/16-10 Reach (inch) 2.125 1.797 1.797 1.984 1.954 2.190 2.100 2.156
R Pulling Tools, Type RJ Size (inch) 1-1/4 1-1/2 1-3/4 2 2-1/2 3 4 Max. OD (inch) 1.220 1.430 1.560 1.770 2.180 2.740 3.660 F/N OD (inch) 1.000 1.188 1.188 1.375 1.375 2.312 2.312 Pulls Neck OD (inch) 1.000 1.188 1.188 1.375 1.750 2.312 3.125 Top Thread 5/8-11 15/16-10 15/16-10 15/16-10 15/16-10 1-1/16-10 1-1/16-10 Reach (inch) 1.844 2.547 2.550 2.547 2.547 2.609 2.000
R Pulling Tool
06/2010
Either of above tools can be changed to other types by changing core. All other parts of above tools are interchangeable .
R Pulling Tools, Type SB Size (inch) 1-1/4 2-1/2 2-1/2 2 2-1/2 3 3 3-1/2 4 Max. OD (inch) 1.220 1.437 1.437 1.766 2.188 2.734 2.844 3.115 3.670 F/N OD (inch) 1.000 1.188 1.188 1.375 1.375 2.312 2.312 2.312 2.312 Pulls Neck OD (inch) 1.000 1.188 1.188 1.375 1.750 2.312 2.312 2.750 2.750 Top Thread 5/8-11 15/16-10 15/16-10 15/16-10 15/16-10 1-1/16-10 1-1/16-10 1-1/16-10 1-1/16-10 Reach (inch) 1.280 0.688 1.297 1.219 1.281 1.380 1.500 1.690 1.500
R Pulling Tools, Type SM Size (inch) 1-2/3 1-3/16 1-1/2 2 Max. OD (inch) 1.188 1.190 1.380 1.766 F/N OD (inch) 0.875 0.875 1.375 1.375 Pulls Neck OD (inch) 0.875 0.875 0.875 1.375 Top Thread 15/16-10 15/16-10 15/16-10 15/16-10 Reach (inch) 1.680 1.680 1.578 1.640
R Pulling Tools, Type SS Size (inch) 1-1/2 2 2-1/2 3 Max. OD (inch) 1.437 1.766 2.188 2.844 F/N OD (inch) 1.188 1.375 1.375 2.312 Pulls Neck OD (inch) 1.188 1.375 1.750 2.312 Top Thread 15/16-10 15/16-10 15/16-10 1-1/16-10 Reach (inch) 1.780 2.030 2.000 2.210
S Pulling Tool
06/2010
Sand Pump Bailer Size (inch) 1-1/4 1-5/8 F/N OD (inch) 1.187 1.187 Thread Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN Guide Shoe OD (inch)* 1.250 1.437 1.850 2.125 2.500 2.687 3.500 3.750
* Guide Shoe O.D. is the max. Bailer Assembly O.D. unless a specified O.D. is requested. The smallest O.D. Guide Shoe is supplied.
06/2010
Sample Bailer
The Sample Bailer is used to collect samples of debris from the well bore creating obstructions. Sample Bailer are available in two basic designs with ball or flapper shoe. The shoe opens when sample bailer assembly is forced in debris and closes when the sample bailer is forced out.
Sample Bailer F/N OD (inch) Thread Connection Box (in. TPI) 1.375 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN 2.312 1-1/16-10 UN 2.312 1-1/16-10 UN 2.312 1-9/16-10 UN
Sand Pump Bailer The pump bailer is used to remove the bulk of sand above the wireline tools / equipment. It is a hollow tube with a check valve (ball or flapper) at its lower end, which is usually mule shoe (cut at 45O). It contains a piston and valve attached to a rod which passes through a loose hold ( for fluid bypass) at the upper end of the tube. This rod is attached to the tool string. As the bottom of the bailer rests on the sand, the weight of the tool string pushes the piston to the bottom of the tube. As this piston is picked up, it sucks sand and debris into the bottom of the bailer. This slow stroking process continues until the bailer is full.
Sample Bailer
Hydrostatic Bailer A hydrostatic bailer consists of a chamber sealed at atmospheric pressure. When the bailer reaches the top of the sand and is jarred down, a shear disk is ruptured and the bottom hole pressure surging into the chamber sucks up the sand. A ball check in the bottom serves to trap the sand in the chamber. These bailer are used to clean off sand or foreign materials from around a fishing neck very successfully and are not recommended for normal bailing operations. In soft sand , this bailer will bury itself each time it goes off. It usually requires a hard object against which to shear the disc.
06/2010
Always use a pump bailer to remove the bulk of sand etc. until pump bailer is resting on the plug or whatever is to be removed. A hydrostatic bailer can then be used to clean around the fishing neck. Hydrostatic bailer are not recommended for normal bailing operations because: r 7RR VORZ r $ KLJK SRVVLELOLW\ RI VWLFNLQJ LQ WKH VDQG GXH WR VXFWLRQ DFWLRQ when the sealed chamber is opened. The sand pumps and hydrostatic bailer can be dangerous after pulling them to the surface and when unloading the sand, due to pressure trapped inside the chamber. Caution should be taken when removing the check valve on the bottom to make sure there is no pressure inside. This can be determined usually by how hard the bottom is to unscrew. Once should never completely remove the bottom while the bailer is pressured up. Do not hammer on a bailer to remove sand. These bailer are subject to bottom hole pressure. It is good idea to visually inspect these bailer for wear and wall reduction. Hydrostatic bailer have pressure relief valves, and some have an automatic pressure relief valve. These become plugged easily and can be dangerous to handle, so observe the above caution when unscrewing the bottom.
06/2010
Hydrostatic Bailer
Hydrostatic Bailer is used to clean off sand or foreign materials from around a fishing neck of tools. Hydrostatic Bailer is used in situation where Pump Type Bailer are not effective.
Hydrostatic Bailer Size (inch) 1-3/8 1-3/4 F/N OD (inch) 1.187 1.375 Thread Connection Pin (in. TPI) 15/16-10 UN 15/16-10 UN Guide Shoe OD (inch)* 1.375 1.750 2.156 2.687
* Guide Shoe O.D. is the max. Bailer Assembly O.D. unless a specified O.D. is requested. The smallest O.D. Guide Shoe is supplied.
Hydrostatic Bailer
06/2010
PX Running Tool
PX Running Tool is to enable X Lock to run selectively in the profile required.
PX Running Tools Actual OD (inch) 1.720 2.171 2.687 2.843 3.250 3.750 4.500 To suit Nipple Bore (inch) 1.875 2.313 2.750 2.875 3.313 3.813 4.562 F/N OD (inch) 1.375 1.750 2.313 2.313 2.313 2.313 3.125 Thread Connection Pin X Box (in. TPI) 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN
PX Running Tool
06/2010
B Shifting Tool
B Shifting Tool is used to open or close Sliding Side Door.
B Shifting Tools SSD ID (inch) 1.375 1.500 1.625 1.710 1.781 1.875 2.125 2.188 2.313 2.562 2.750 2.813 3.125 3.313 3.437 3.688 OD (Keys Retracted) (inch) 1.35 1.49 1.62 1.69 1.75 1.84 1.97 2.17 2.16 2.53 2.73 2.72 3.06 3.25 3.38 3.66 F/N OD (inch) 1.000 1.187 1.187 1.187 1.375 1.375 1.375 1.750 1.750 1.750 2.313 2.313 1.750 2.313 2.313 3.125 Thread Connection Pin X Box (in. TPI) 5/-11 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN
B Shifting Tool
06/2010
Pinning Tool
Pinning Tool Size (inch) 1-1/2, 1-5/8, 2-1/2 3, 4, R & S
Pinning Tool
Releasing Tool
Releasing Tool Size (inch) 2, 2-1/2, 3 4
Releasing Tool
06/2010
Wireline Cutter
Wireline Cutters are used to cut the wire near the rope socket and retrieve to surface with cut end of wire. It can cut all sizes of wires of large dia. by changing its internals appropriately.
Wireline Cutters Size OD (inch) 1.500 1.875 2.000 Specify Wire Size, Other sizes available on request. F/N OD (inch) 1.375 1.375 1.750
Wireline Cutter
06/2010
Wireline Snipper
Wireline Snippers are used to cut / slice the wire when operator finds it necessary to cut the wire when struck in hole.
Wireline Snippers F/N OD (inch) 1.375 1.750 1.750 1.750 1.750 2.313 2.313
Wire Size (inch) 0.092 0.108 0.092 0.108 0.187 0.219 0.092 0.108 0.187 0.219 0.092 0.108 0.187 0.219
Wireline Snipper
06/2010
Tubing Broach
Tubing Broach is used remove buss in the tubing. Tubing Broach is also used to remove scale, rust etc, from tubing I.D.
Tubing Broaches F/N OD (inch) Top Connection (inch TPI) 1.375 15/16-10 UN 1.375 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN 1.750 1-1/16-10 UN 2.313 1-1/16-10 UN
Tubing Broaches
06/2010
Wireline Wirefinder
Wireline Finder is used in wireline fishing operations to locate broken wire in tubing. The fingers of slotted bottom guide pressed against tubing ID and locate the top of wire and direct it inside the finder.
Wireline Wirefinder F/N OD (inch) Thread Connection Pin (in. TPI) 1.375 15/16-10 UN 1.375 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN 1.750 1-1/16-10 UN Wireline Wirefinder
Other sizes available on request. Please quote max. O.D. when ordering.
06/2010
Wireline Retriever
Wireline Retriever is used during wireline fishing operations to locate top of broken wireline and to bundle it.
Wireline Retriever, Slip Type Tool OD To run in Can be adapted (inch) tubing (inch) run in (inch) 1-1/2 1-1/2 1-13/16 1-1/2 1-1/2 2-3/8 2 2-1/2 2-3/8 2-7/8 2-7/8 3-1/2 F/N OD (inch) 1.375 1.375 1.375 Thread Conn. Pin (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN Guide Type Slotted Plain Slotted
Wireline Retriever
06/2010
Go-Devil
Go-Devils are used in wireline fishing operations when wireline is required to be cut. Go-Devils looks similar to wireline stem and has a longitudinal slot on body with a metallic strip pinned within slot, to prevent wireline from coming out.
06/2010
Roller Go-Devil
Roller Go-Devil is used mainly in deviated wells to reduce friction when tool string is run in hole. Roller Go-Devil is similar to GoDevil with exception of Rollers. Available in various lengths and flat/angled bottom type.
Roller Go-Devil OD (inch) 1.500 1.875 2.125 2.500 Length 2, 3 or 5 feet. F/N OD (inch) 1.375 1.750 1.750 2.312
06/2010
Paraffin Scratcher
Paraffin Scratchers are used to clean the paraffin deposition on the ID of tubing, nipple profile etc.
Paraffin Scratchers Size (inch) 1-1/2 2-1/16 2 2-1/2 2 2-1/2 3-1/2 F/N OD (inch) 1.187 1.375 1.750 1.750 Thread Connection Pin (inch TPI) 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN
Paraffin Scratcher
06/2010
Wireline Grab
Wireline Grabs are used in wireline fishing operations to engaged broken wire from the tubing to retrieve to surface.
Wireline Grabs Size (inch) 1-1/2 2 2-1/2 3 4 5-1/2 Max. OD (inch) 1.437 1.843 2.718 2.875 F/N OD (inch) 1.187 1.375 2.312 2.312 Thread Conn. Pin X Box (in. TPI) 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN No. of Barb 2 2 3 3
Wireline Grab
06/2010
Center Spear
Center Spears are used to engage broken wire in hole when in balled condition. It is used in particular when the broken wire, in well bore, is badly balled and can not be engaged by wireline grab.
Center Spears F/N OD (inch) Top Connection Pin (in. TPI) 1.375 15/16-10 UN 1.750 1-1/16-10 UN 2.313 1-9/16-10 UN
Center Spear
06/2010
OD range (inch) 24
Bow Spring Centralizer F/N OD (inch) Top Connection (in. TPI) 1.375 15/16-10 UN
06/2010
Anti Blow-up Tools Tubing size (inch) 2-3/8 2-7/8 3-1/2 4-1/2 5-1/2 D.D. Dogs expanded 2.010 2.441 3.068 4.090 4.892 F/N OD (inch) 1.375 1.375 1.375 1.750 1.750 Connections (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN
06/2010
Swivel Joint
The Swivel Joint is a wireline accessory used to minimize the effect of line twist caused by subsurface devices being run. The Swivel Joint has a bearing incorporated into its design and is used to minimize rotation whilst running tubing or casing calliper surveys. The Swivel Joint has a double fishneck feature and standard pin and box threads.
Swivel Joints F/N OD (inch) Connection Thread (inch TPI) 1.375 15/16-10 UN 1.750 1-1/16-10 UN 2.313 1-9/16-10 UN
06/2010
Gauge Cutter Ring Set F/N OD (inch) Top Connections (inch TPI) 1.187 15/16-10 UN 1.375 15/16-10 UN 1.750 1-1/16-10 UN
06/2010
Wireline Crossover
Wireline Crossover are used to connect two tool string items with different threads.
Wireline Crossovers Max. OD (inch) 1.500 1.375 2.250 2.312 1.375 1.750 2.312 2.312 2.312 1.750 2.312 2.250 2.312 2.500 2.312 2.312 2.312 F/N OD (inch) 1.375 1.375 1.375 1.375 1.375 1.750 1.750 2.312 2.312 1.750 2.312 1.750 2.312 2.312 2.312 2.312 2.312 Thread Conn. Pin (in. TPI) 15/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-1/16-10 UN 1-3/16-10 UN 1-3/16-10 UN 1-3/8-10 UN 1-9/16-10 UN 1-9/16-10 UN 1-9/16-10 UN 1-9/16-10 UN 1-9/16-10 UN Thread Conn. Box (in. TPI) 15/16-10 UN 1-1/16-10 UN 1-9/16-10 UN 1-9/16-10 UN 15/16-10 UN 15/16-10 UN 15/16-10 UN 1-3/16-10 UN 1-9/16-10 UN 15/16-10 UN 1-9/16-10 UN 1-9/16-10 UN 15/16-10 UN 15/16-10 UN 1-1/16-10 UN 1-3/16-10 UN 1-3/8-10 UN Wireline Crossover
06/2010
Sucker Rod Threads & Quick Lock Connections Thread / QLS Yield Strength 15/16-10 SRT 1-1/16-10 SRT 1-9/16-10 SRT 1-1/2 QLS 1-7/8 QLS & 2-1/8 QLS Design Tensile* Strength 47584 lbs. 63910 lbs. 148819 lbs. 51128 lbs. 77605 lbs. Design Shear* Strength 68475 lbs. 79888 lbs. 195382 lbs. 60258 lbs. 74409 lbs. Ultimate Tensile 72966 lbs. 96600 lbs. 228200 lbs. 77700 lbs. 119000 lbs.
* Theoretical values for guidance only. Suitable safety factor to be considered when in use.
06/2010
H 10 10 10 10 10
06/2010