Professional Documents
Culture Documents
Root Finding and Nonlinear Sets of Equations
Root Finding and Nonlinear Sets of Equations
University Press. Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machinereadable files (including this one) to any server computer, is strictly prohibited. To order Numerical Recipes books or CDROMs, visit website http://www.nr.com or call 1-800-872-7423 (North America only), or send email to [email protected] (outside North America).
whose solution or solutions are desired. When there is only one independent variable, the problem is one-dimensional, namely to nd the root or roots of a function. With more than one independent variable, more than one equation can be satised simultaneously. You likely once learned the implicit function theorem which (in this context) gives us the hope of satisfying N equations in N unknowns simultaneously. Note that we have only hope, not certainty. A nonlinear set of equations may have no (real) solutions at all. Contrariwise, it may have more than one solution. The implicit function theorem tells us that generically the solutions will be distinct, pointlike, and separated from each other. If, however, life is so unkind as to present you with a nongeneric, i.e., degenerate, case, then you can get a continuous family of solutions. In vector notation, we want to nd one or more N -dimensional solution vectors x such that f(x) = 0 (9.0.2)
where f is the N -dimensional vector-valued function whose components are the individual equations to be satised simultaneously. Dont be fooled by the apparent notational similarity of equations (9.0.2) and (9.0.1). Simultaneous solution of equations in N dimensions is much more difcult than nding roots in the one-dimensional case. The principal difference between one and many dimensions is that, in one dimension, it is possible to bracket or trap a root between bracketing values, and then hunt it down like a rabbit. In multidimensions, you can never be sure that the root is there at all until you have found it. Except in linear problems, root nding invariably proceeds by iteration, and this is equally true in one or in many dimensions. Starting from some approximate trial solution, a useful algorithm will improve the solution until some predetermined convergence criterion is satised. For smoothly varying functions, good algorithms 347
348
Chapter 9.
will always converge, provided that the initial guess is good enough. Indeed one can even determine in advance the rate of convergence of most algorithms. It cannot be overemphasized, however, how crucially success depends on having a good rst guess for the solution, especially for multidimensional problems. This crucial beginning usually depends on analysis rather than numerics. Carefully crafted initial estimates reward you not only with reduced computational effort, but also with understanding and increased self-esteem. Hammings motto, the purpose of computing is insight, not numbers, is particularly apt in the area of nding roots. You should repeat this motto aloud whenever your program converges, with ten-digit accuracy, to the wrong root of a problem, or whenever it fails to converge because there is actually no root, or because there is a root but your initial estimate was not sufciently close to it. This talk of insight is all very well, but what do I actually do? For onedimensional root nding, it is possible to give some straightforward answers: You should try to get some idea of what your function looks like before trying to nd its roots. If you need to mass-produce roots for many different functions, then you should at least know what some typical members of the ensemble look like. Next, you should always bracket a root, that is, know that the function changes sign in an identied interval, before trying to converge to the roots value. Finally (this is advice with which some daring souls might disagree, but we give it nonetheless) never let your iteration method get outside of the best bracketing bounds obtained at any stage. We will see below that some pedagogically important algorithms, such as secant method or Newton-Raphson, can violate this last constraint, and are thus not recommended unless certain xups are implemented. Multiple roots, or very close roots, are a real problem, especially if the multiplicity is an even number. In that case, there may be no readily apparent sign change in the function, so the notion of bracketing a root and maintaining the bracket becomes difcult. We are hard-liners: we nevertheless insist on bracketing a root, even if it takes the minimum-searching techniques of Chapter 10 to determine whether a tantalizing dip in the function really does cross zero or not. (You can easily modify the simple golden section routine of 10.1 to return early if it detects a sign change in the function. And, if the minimum of the function is exactly zero, then you have found a double root.) As usual, we want to discourage you from using routines as black boxes without understanding them. However, as a guide to beginners, here are some reasonable starting points: Brents algorithm in 9.3 is the method of choice to nd a bracketed root of a general one-dimensional function, when you cannot easily compute the functions derivative. Ridders method (9.2) is concise, and a close competitor. When you can compute the functions derivative, the routine rtsafe in 9.4, which combines the Newton-Raphson method with some bookkeeping on bounds, is recommended. Again, you must rst bracket your root. Roots of polynomials are a special case. Laguerres method, in 9.5, is recommended as a starting point. Beware: Some polynomials are ill-conditioned! Finally, for multidimensional problems, the only elementary method is Newton-Raphson (9.6), which works very well if you can supply a
Sample page from NUMERICAL RECIPES IN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press. Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machinereadable files (including this one) to any server computer, is strictly prohibited. To order Numerical Recipes books or CDROMs, visit website http://www.nr.com or call 1-800-872-7423 (North America only), or send email to [email protected] (outside North America).
9.0 Introduction
349
good rst guess of the solution. Try it. Then read the more advanced material in 9.7 for some more complicated, but globally more convergent, alternatives. Avoiding implementations for specic computers, this book must generally steer clear of interactive or graphics-related routines. We make an exception right now. The following routine, which produces a crude function plot with interactively scaled axes, can save you a lot of grief as you enter the world of root nding.
#include <stdio.h> #define ISCR 60 #define JSCR 21 #define BLANK #define ZERO - #define YY l #define XX - #define FF x Number of horizontal and vertical positions in display.
Sample page from NUMERICAL RECIPES IN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press. Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machinereadable files (including this one) to any server computer, is strictly prohibited. To order Numerical Recipes books or CDROMs, visit website http://www.nr.com or call 1-800-872-7423 (North America only), or send email to [email protected] (outside North America).
void scrsho(float (*fx)(float)) For interactive CRT terminal use. Produce a crude graph of the function fx over the promptedfor interval x1,x2. Query for another plot until the user signals satisfaction. { int jz,j,i; float ysml,ybig,x2,x1,x,dyj,dx,y[ISCR+1]; char scr[ISCR+1][JSCR+1]; for (;;) { printf("\nEnter x1 x2 (x1=x2 to stop):\n"); Query for another plot, quit scanf("%f %f",&x1,&x2); if x1=x2. if (x1 == x2) break; for (j=1;j<=JSCR;j++) Fill vertical sides with character l. scr[1][j]=scr[ISCR][j]=YY; for (i=2;i<=(ISCR-1);i++) { scr[i][1]=scr[i][JSCR]=XX; Fill top, bottom with character -. for (j=2;j<=(JSCR-1);j++) Fill interior with blanks. scr[i][j]=BLANK; } dx=(x2-x1)/(ISCR-1); x=x1; ysml=ybig=0.0; Limits will include 0. for (i=1;i<=ISCR;i++) { Evaluate the function at equal intervals. y[i]=(*fx)(x); Find the largest and smallest valif (y[i] < ysml) ysml=y[i]; ues. if (y[i] > ybig) ybig=y[i]; x += dx; } if (ybig == ysml) ybig=ysml+1.0; Be sure to separate top and bottom. dyj=(JSCR-1)/(ybig-ysml); jz=1-(int) (ysml*dyj); Note which row corresponds to 0. for (i=1;i<=ISCR;i++) { Place an indicator at function height and scr[i][jz]=ZERO; 0. j=1+(int) ((y[i]-ysml)*dyj); scr[i][j]=FF; } printf(" %10.3f ",ybig); for (i=1;i<=ISCR;i++) printf("%c",scr[i][JSCR]); printf("\n"); for (j=(JSCR-1);j>=2;j--) { Display. printf("%12s"," "); for (i=1;i<=ISCR;i++) printf("%c",scr[i][j]); printf("\n"); } printf(" %10.3f ",ysml);
350
Chapter 9.
for (i=1;i<=ISCR;i++) printf("%c",scr[i][1]); printf("\n"); printf("%8s %10.3f %44s %10.3f\n"," ",x1," ",x2); } }
Sample page from NUMERICAL RECIPES IN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press. Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machinereadable files (including this one) to any server computer, is strictly prohibited. To order Numerical Recipes books or CDROMs, visit website http://www.nr.com or call 1-800-872-7423 (North America only), or send email to [email protected] (outside North America).
CITED REFERENCES AND FURTHER READING: Stoer, J., and Bulirsch, R. 1980, Introduction to Numerical Analysis (New York: Springer-Verlag), Chapter 5. Acton, F.S. 1970, Numerical Methods That Work; 1990, corrected edition (Washington: Mathematical Association of America), Chapters 2, 7, and 14. Ralston, A., and Rabinowitz, P. 1978, A First Course in Numerical Analysis, 2nd ed. (New York: McGraw-Hill), Chapter 8. Householder, A.S. 1970, The Numerical Treatment of a Single Nonlinear Equation (New York: McGraw-Hill).
Some root-nding algorithms (e.g., bisection in this section) will readily converge to c in (9.1.1). Luckily there is not much possibility of your mistaking c, or any number x close to it, for a root, since mere evaluation of |f (x)| will give a very large, rather than a very small, result. If you are given a function in a black box, there is no sure way of bracketing its roots, or of even determining that it has roots. If you like pathological examples, think about the problem of locating the two real roots of equation (3.0.1), which dips below zero only in the ridiculously small interval of about x = 10 667 . In the next chapter we will deal with the related problem of bracketing a functions minimum. There it is possible to give a procedure that always succeeds; in essence, Go downhill, taking steps of increasing size, until your function starts back uphill. There is no analogous procedure for roots. The procedure go downhill until your function changes sign, can be foiled by a function that has a simple extremum. Nevertheless, if you are prepared to deal with a failure outcome, this procedure is often a good rst start; success is usual if your function has opposite signs in the limit x .