Cicobond ACR 61
Cicobond ACR 61
ACR Cicobond Cicofloor FS-50 High Quality, Water Proof Bonding Agent & Curing Compound
Solvent Free Epoxy Floor Coating
Description
Cicobond ACR is medium viscosity, fine particle size acrylic polymer emulsion. It is designed to be used in the building industry as a bonding agent for cementitious mix and to enhance its waterproofing properties. Cicobond ACR has relatively high bonding strength to concrete, which makes it essential part of any successful patch repair. Cicobond ACR could also be used as a curing compound, especially for any repair that it was used as bonding agent for.
12 months storage life if stored in its original unopened containers under shaded place in a temperature from 5oC to 40oC.
Properties
Appearance Density kg/lit @ 25oC, Solid content, % PH
2
Advantages
Provides excellent bonding to concrete, masonry, brick, plaster, and wood. Provides excellent water resistance. Provides long term durability on exterior exposure. Provides superior freeze/thaw resistance. As an additive, it improves the physical and mechanical characteristics of cementitious mortars. Excellent curing compound. Increases abrasion and chemical resistance.
Standards Compliance
ASTM C1059
Packaging
4 kg can 20 kg pail 200 kg drum
CicobondACR CicofloorFS-50
As a mortar additive: Cicobond ACR can be added to the different cement mortars to enhance bonding and tensile strengths. The usual addition rate of Cicobond ACR is 12-20 % by weight of cement depending on the required application. The modified mortar can be used for both interior and exterior purposes. The following table could be used as a guidance for the different mortars: Design Mix
OPC (kg) Sand* (kg)
Coarse aggr. 8 mm (kg)
Cleaning
Spillages of Cicobond ACR should be washed out with water, and if became solid, it should be removed by hand tools or by light mechanical means.
Technical Support
CIC provides on-site assistance, as well as consulting services on projects when requested. Technical data sheets on other CIC products and guidance on their use are available on request
Precautions
Health and Safety Cicobond ACR is non-hazardous. However, it should not be swallowed or allowed to come into contact with skin or eyes. Suitable protective goggles and gloves should be worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. When contact with the skin is made, wash off immediately with soap and water. If swallowed, seek medical attention immediately, do not induce vomiting.
8-10 12-14 11-13 84-86 93-95 95-97 * The used sand is the ASTM standard sized sand. All properties may vary if other size used.
Yield (lit)
For more details, please review our Technical Guide for Cementitious Repair
Warranty CIC products are guaranteed against defective materials and manufacture and sold subject to CIC's standard terms and conditions of sale. Whilst CIC endeavors to ensure that any advice, information or recommendation given is correct, the company can not accept any liability either directly or indirectly arising from the use of its products, since the company has no control over the application of its products. Information contained in this document is given on the best current knowledge. CIC's policy is one of continuous improvement and the company reserves the right to change the company products without prior notice.
Head Office: Jeddah Towers Building, Sharafiyah P.O Box 7232, Jeddah 21462 Tel. 653-2152 Fax 651-9230
Riyadh 01-493 9213 Dammam 03-865 1349 Fax: 01-492 1743 Fax: 03-865 6410 Makkah Madina 02-548 2280 04-839 0424 Fax: 02-545 5431 Fax: 04-834 2091
www.cictg.com