Scribd Logo
Upload

Welcome to Scribd!

  • Rothoblaas - Alumidi Bracket With Holes - Item Specification - en

    Uploaded by

    Andrei Gheorghica
    113 views4 pages
    This document specifies 3 items: 1) A medium sized aluminum alloy retractable bracket with pre-drilled core for mounting on aluminum and wood beams, installed using various screws and nails. 2) A medium sized wood-wood aluminum alloy retractable bracket with pre-drilled core for mounting wooden beams, installed using nails and pins. 3) A medium sized wood-concrete aluminum alloy retractable bracket with pre-drilled core for mounting wooden and concrete beams, installed using chemical anchors and pins. Prices per unit and total prices are also included.

    Original Description:

    Rothoblaas.alumidi Bracket With Holes.item Specification.en

    Original Title

    Rothoblaas.alumidi Bracket With Holes.item Specification.en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document specifies 3 items: 1) A medium sized aluminum alloy retractable bracket with pre-drilled core for mounting on aluminum and wood beams, installed using various screws and nails. 2) A medium sized wood-wood aluminum alloy retractable bracket with pre-drilled core for mounting wooden beams, installed using nails and pins. 3) A medium sized wood-concrete aluminum alloy retractable bracket with pre-drilled core for mounting wooden and concrete beams, installed using chemical anchors and pins. Prices per unit and total prices are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    113 views4 pages

    Rothoblaas - Alumidi Bracket With Holes - Item Specification - en

    Uploaded by

    Andrei Gheorghica
    This document specifies 3 items: 1) A medium sized aluminum alloy retractable bracket with pre-drilled core for mounting on aluminum and wood beams, installed using various screws and nails. 2) A medium sized wood-wood aluminum alloy retractable bracket with pre-drilled core for mounting wooden beams, installed using nails and pins. 3) A medium sized wood-concrete aluminum alloy retractable bracket with pre-drilled core for mounting wooden and concrete beams, installed using chemical anchors and pins. Prices per unit and total prices are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    Specifications:

    Spec. n. 1 Description Unit of measur ement Price per unit Total price

    MEDIUM SIZED ALUMINUM ALLOY RETRACTABLE BRACKET WITH PRE-DRILLED CORE: Supply and installation, as provided for in the technical drawings of the project, of aluminium alloy retractable brackets, with height H = mm, ALUMIDI BRACKET produced and marketed by Rotho Blaas srl (www.rothoblaas.com), having the following characteristics: aluminum alloy type EN AW 6005 in accordance with EN 573-3:2007 created in a single piece by extrusion CE marking for construction products in accordance with Directive 89/106/EEC, in accordance with ETAG 015 guidelines

    The geometry of the bracket is as follows:

    Installation, for mounting of the wing on the main wooden beam side, must be carried out with Anker type improved adherence nails, diameter 4 mm and minimum length Lmin = 60 mm or, alternatively, with suitable entirely threaded screws 5 mm with minimum length Lmin = 40 mm, screws for PF6035xx pierced plates. Installation, for mounting of the wing on the main concrete beam side, must be carried out with chemical dowels, diameter 8 mm and minimum length Lmin = 110 mm with minimum steel class of the threaded bar equal to 5.8 or else with screw-in anchors 10 mm with minimum length Lmin = 80 mm. Smooth pins diameter 12 mm or self-drilling pins 7 mm

    must be used for connection of the core on the secondary beam side. Milling for insertion of the core in the secondary beam may not exceed a maximum thickness of Smax= 8 mm. These indications are given in order to perform supply and installation to the best working standards.

    each

    /each

    MEDIUM SIZED WOOD-WOOD ALUMINIUM ALLOY RETRACTABLE BRACKET WITH PREDRILLED CORE: Supply and installation, as provided for in the technical drawings of the project, of a wood-wood retractable junction carried out with the use of an aluminium alloy retractable bracket, with height H = mm, ALUMIDI BRACKET produced and marketed by Rotho Blaas srl (www.rothoblaas.com), having the following characteristics: aluminum alloy type EN AW 6005 in accordance with EN 573-3:2007 created in a single piece by extrusion CE marking for construction products in accordance with Directive 89/106/EEC, in accordance with ETAG 015 guidelines

    The geometry of the bracket is as follows:

    Installation, for mounting of the wing on the main wooden beam side, must carried out with N = Anker nails for wood 4 mm with length L = mm and N = smooth

    pins 12 mm with length L = mm shall be used for connection of the core on the secondary beam side. Milling for insertion of the core in the secondary beam may not exceed a maximum thickness of Smax= 8 mm. These indications are given in order to perform supply and installation to the best working standards.

    each

    /each

    MEDIUM SIZED WOOD-CONCRETE ALUMINIUM ALLOY RETRACTABLE BRACKET WITH PREDRILLED CORE: Supply and installation, as provided for in the technical drawings of the project, of a wood-concrete retractable junction carried out with the use of an aluminium alloy retractable bracket, with height H = mm, ALUMIDI BRACKET produced and marketed by Rotho Blaas srl (www.rothoblaas.com), having the following characteristics: aluminum alloy type EN AW 6005 in accordance with EN 573-3:2007 created in a single piece by extrusion CE marking for construction products in accordance with Directive 89/106/EEC, in accordance with ETAG 015 guidelines

    The geometry of the bracket is as follows:

    Installation, for mounting of the wing on the main concrete beam side, must carried out with N = chemical anchors, vinylester type with CE marking and a

    threaded bar 8 mm with length L = mm in steel with class and N = smooth pins 12 mm with length L = mm shall be used for connection of the core on the secondary beam side. Milling for insertion of the core in the secondary beam may not exceed a maximum thickness of Smax= 8 mm. These indications are given in order to perform supply and installation to the best working standards.

    each

    /each

    You might also like