Professional Documents
Culture Documents
ITIL Test Paper
ITIL Test Paper
1. Which of the following does NOT represent a stage in the Service Lifecycle?
a. Continual Service Improvement
b. Service Operation
c. Service Architecture
d. Service Strategy
2. Which of the following requirements are adequate for an integrated set of Service
Management technology?
1. The tool should have an integrated Configuration Management System to allow
the organizations IT infrastructure assets, components and services to be held
together with all relevant attributes and to allow relationships between each to
be stored and maintained.
2. The tool should be able to plan changes and assess the impact of changes to
minimize the likelihood of post-production problems.
3. The tool should contain a workflow or process control engine to allow the predefinition
and control of defined processes such as an Incident Lifecycle, Request
Fulfilment Lifecycle, Problem Lifecycle, Change Model etc.
4. The tool should ensure that all of the information within the Service Catalogue
is accurate and up to date.
a. 1 only
b. 1 and 3 only
c. 1, 3 and 4 only
d. All of the above
3. Which of the following should be considered when automating Service
Management?
1. Simplify the service processes before automating them.
2. Clarify the flow of activities, allocation of tasks, need for information and
interactions.
3. In self service situations, reduce the surface area of the contact users have with
the underlying systems and processes.
4. Do not be in a hurry to automate tasks and interactions that are neither simple
nor routine.
a. 1 only
b. 1 and 2 only
c. 1, 2 and 3 only
d. All of the above
4. Which of the following characterizes a function?
1. It is specialized to perform a certain type of work.
2. It is self-contained with capabilities and resources for its performance.
3. It is responsible for specific outcomes.
4. It can be repeated and becomes manageable.
a. 1 only
b. 1 and 3 only
c. 1, 2 and 3 only
d. All of the above
5. Which of the following are characteristics of a process
1. Measurable
2. Responds to a specific Event
3. Has customers
4. Leads to specific results
a. 1 only
b. 1 and 3 only
c. 1, 2 and 3 only
d. All of the above
Service Strategy
1. A risk is measured by:
1. the probability of a threat
2. the vulnerability of the asset to a threat
3. the countermeasures put in place
4. the impact if a threat occurs
a. 1 only
b. 2 and 4 only
c. 1, 2 and 4 only
d. All of the above
2. The value of a service is determined by:
1. Preferences
2. Practice
3. Perceptions
4. Business outcome
a. 1 only
b. 1 and 3 only
c. 1, 3 and 4 only
d. All of the above
3. What are the MAIN activities in the Service Strategy management process?
1. Define the market
2. Develop the offerings
3. Develop strategic assets
4. Prepare for execution
a. 4 only
b. 2 and 3 only
c. 1, 2 and 3 only
d. All of the above
4. Which of the following activities is NOT an activity in the Financial Management
process?
a. Service devaluation
b. Service Portfolio Management
c. Service Investment Analysis
d. Compliance
5. Which of the following concepts and activities help Demand Management in
managing the demand for services?
1. Differentiated offerings
2. Differentiated service levels
3. Major Incident Management
4. Analysing and tracking the activity patterns of a business process
a. 4 only
b. 1 and 2 only
c. 1, 2 and 4 only
d. All of the above
Service Design
1. Which of the following statements is NOT an objective of Service Design?
a. To design services to satisfy business objectives.
b. To identify and manage risks.
c. To plan and manage the resources to successfully establish a new or changed
service into production with the predicted cost, quality and time estimates.
d. To design efficient and effective processes for the design, transition, operation
and improvement of high-quality IT services.
2. Which of the following statements are CORRECT?
a. A Service Provider is an organization supplying services to one or more external
customers.
b. A Service Provider is an organization supplying services to one or more internal
customers or external customers.
c. A Service Provider is a third party responsible for supplying goods or underpinning
services that are required to deliver IT services.
d. A Service Provider is a role that has responsibility for ensuring that all new
services are designed to deliver the levels of availability required by the business
and validation of the final design to meet the minimum levels of availability as
agreed by the business for IT services.
3. Which of the following are the five major aspects of Service Design?
1. Service Portfolio design
2. Technology and architectural design
3. Design of services
4. Strategy design
5. Process design
6. Measurement design
a. 1, 2, 3, 4 and 5
b. 1, 2, 4, 5 and 6
c. 1, 2, 3, 5 and 6
d. 2, 3, 4, 5 and 6
4. Which of the following is NOT a sourcing approach?
a. Insourcing
b. Co-sourcing
c. Rightsourcing
d. Application Service Provision
5. Which of the following activities is an activity in the Service Level Management
process?
a. Collate, measure and improve customer satisfaction
b. Status reporting
c. Deploy Service Component
d. Resolution and Recovery
Service Transition
1. Service Transition adds value to the business by improving:
a. the management of the technology that is used to deliver and support services
b. the success rate of changes and releases for the business
c. the design of the IT processes
d. the organizational competency for Continual Service Improvement
2. Which of the following is NOT a Change type?
a. Normal Change
b. Emergency Change
c. Known Change
d. Standard Change
3. Which of the following statements about the Service V model are CORRECT?
1. Using a model such as the V model builds in service validation and testing early
in the Service Lifecycle.
2. The left-hand side of the V model represents the specification of the service
requirements down to the detailed Service Design.
3. The right-hand side of the V model focuses on the validation activities that are
performed against the specifications defined on the left-hand side.
4. Customers who sign off the agreed service requirements will also sign off the
Service Acceptance Criteria and test plan.
a. 1 only
b. 2 and 3 only
c. 1, 2 and 3 only
d. All of the above
4. Consider the following activities from the Change Management process:
1. Review the Change
2. Assess and evaluate the Change
3. Authorize the Change
4. Coordinate Change implementation
5. Review Request for Change
Which of the following options describes the CORRECT order of the activities?
a. 1, 2, 3, 4, 5
b. 1, 3, 4, 2, 5
c. 5, 3, 2, 4, 1
d. 5, 2, 3, 4, 1
5. Which of the following statements about the Configuration Management System
are CORRECT?
1. It will hold details of all of the components of the IT infrastructure as well as the
relationships between these components.
2. At the data level it consists of one and only one physical Configuration
Management Database.
3. The Service Knowledge Management System includes the Configuration
Management System.
4. It is maintained by Service Asset and Configuration Management.
a. 1 only
b. 2 and 3 only
c. 1, 3 and 4 only
d. All of the above
Service Operation
1. Which of the following statements BEST describes the objective of Service
Operation?
a. To design services to satisfy business objectives.
b. To ensure that the service can be used in accordance with the requirements and
constraints specified within the service requirements.
c. To achieve effectiveness and efficiency in the delivery and support of services.
d. To transform Service Management into a strategic asset.
2. Which of the following statements is the CORRECT definition of a Known Error?
a. An action taken to repair the root cause of an Incident or Problem.
b. A Problem that has a documented root cause or a Workaround.
c. The unknown cause of one or more Incidents.
d. A Problem that has a documented root cause and a Workaround.
3. Which of the following balances has to be dealt with by Service Operation?
a. Supply versus demand
b. Push versus pull
c. Stability versus responsiveness
d. Cost versus resources
4. Which of the following activities is NOT an activity in the Incident Management
process?
a. Incident Identification
b. Incident Verification
c. Incident Categorization
d. Incident Prioritization
5. Which of the following activities is the Incident Manager responsible for?
1. Producing management information.
2. Monitoring the effectiveness of Incident Management and making recommendations
for improvement.
3. Managing the work for Incident support staff (first-line and second line).
4. Managing major incidents.
a. 1 only
b. 2 and 3 only
c. 1, 2 and 3 only
d. All of the above
6. Which of the following is an objective for Problem Management.
a. To define, document, agree, monitor, measure, report and review the level of IT
service provided.
b. To minimize the impact of Incidents that cannot be prevented.
c. To restore normal Service Operation as quickly as possible and minimize the
adverse impact on business operations.
d. To act as a basis for automating routine Operations Management activities.
7. Which of the following are examples of Event types?
1. Informational
2. Warning
3. Major
4. Exception
a. 2 only
b. 2 and 3 only
c. 1, 2 and 3 only
d. All of the above
8. Which of the following options are typical ways of structuring and locating a Service
Desk?
1. Local Service Desk
2. Centralized Service Desk
3. Virtual Service Desk
4. Follow-the-Sun
a. 2 only
b. 2 and 3 only
c. 1, 2 and 3 only
d. All of the above
9. Which of the following is NOT the responsibility of a Service Desk?
a. Providing first-line investigation and diagnosis.
b. Closing all resolved Incidents.
c. Resolving those Incidents it is able to resolve.
d. Closing all resolved Know Errors.
10. Which of the following is NOT described as a function but as a process in Service
Operation?
a. Event Management
b. Applications Management
c. IT operations Management
d. Technical Management
CSI
1. Which of the following is NOT an activity in the Deming PDCA cycle?
a. Plan
b. Do
c. Check
d. Align
2. What are the reasons to monitor and measure?
1. To validate - monitoring and measuring to validate previous decisions.
2. To direct - monitoring and measuring to set direction for activities in order to
meet set targets.
3. To justify - monitoring and measuring to justify, with factual evidence of proof,
that a course of action is required.
4. To intervene - monitoring and measuring to identify a point of intervention,
including subsequent changes and corrective actions.
a. 1 only
b. 1 and 2 only
c. 1, 2 and 4 only
d. All of the above
3. Which of the following is an objective for the 7-Step Improvement process?
a. To provide operations visibility, insight and superior decision making.
b. To design processes for the design, transition, operations and improvement of IT
Services.
c. To identify goals and objectives in order to properly identify what should be
measured.
d. To minimize the impact of Incidents that cannot be prevented.
ANSWERS
ITIL Introduction
1. c - Options (a), (b) and (d) are all stages of the lifecycle. Two other lifecycle stages not
mentioned in the question are Service Design and Service Transition.
2. b - Option (2) and (4) are requirements for the processes and roles and not the tool.
3. d - All these guidelines should be considered when applying automation.
4. c - Option 4 (it can be repeated and becomes manageable) is a characteristic of a
process.
5. d - All the four options are process characteristics.
Service Strategy
1. c - Risk analysis involves the identification and assessment of the level of the risks
calculated from the assessed values of assets (4) and the assessed levels of threats to
(1), and vulnerabilities of (2), those assets, whereas countermeasures (3) are put in
place based on the identified risks.
2. c - Option (2) practice is not by itself a determinant for value proposition.
3. d - All of the activities are part of the Service Strategy management process.
4. a - Service devaluation is not an activity in the Financial Management process,
whereas Service valuation is.
5. c - Major Incident Management is not a method drawn on by Demand
Management.
Service Design
1. c - This is one of the objectives of Service Transition.
2. b - Option (a) is incorrect because a Service Provider can provide services internally
(called a type I or II Service Provider). Option (c) is the definition of a Supplier, and
option (d) is a responsibility for the Availability Manager.
3. c - Strategy design is part of the Service Strategy stage of the lifecycle.
4. c - Rightsourcing is a popular way of saying that you need to make the right mix of
the sourcing approaches.
5. a - Option (b) is an activity from the Service Asset and Configuration Management
process, option (c) is an activity from the Release and Deployment Management
process and option (d) is an activity form the Incident Management process.
6. b - Option (a) is an example of an Incident Management metric, option (c) is an example
of a metric to measure the efficiency and effectiveness of the Change Management
process, and option (d) is an example of a Continual Service Improvement metric.
7. d
8. b - There is nothing in ITIL called Configuration Capacity Management.
9. c - RACI is an acronym for Responsible, Accountable, Consulted and Informed.
Service Transition
1. b - Option (a) is a benefit of Service Operation option, option (c) is a benefit of
Service Design and option (d) is a benefit of Continual Service Improvement.
2. c - Known Change is not a specific term in ITIL.
3. d - All statements are correct.
4. d - The full list of the activities in the Change Management process can be found in
Section 5.2.2.
5. c - At the data level, the Configuration Management System may take data from
several physical Configuration Management Databases, which together constitute
a federated Configuration Management Database.
Service Operation
1. c - Option (a) is an objective of Service Design, option (b) is an objective of Service
Transition and option (d) is an objective of Service Strategy.
2. d - Option (a) is the definition of a resolution, option (b) does not reflect that the
definition of a Know Error requires both a root cause and a Workaround, and option
(c) is the definition of a Problem.
3. c - Options (a) and (d) are dealt with by Capacity Management in Service Design and
option (b) refers to two alternative ways of deployment in Service Transition.
4. b - Incident verification is not an activity in the Incident Management process.
5. d - All the activities are part of the responsibilities of the Incident Manager.
6. b - Option (a) is an objective for Service Level Management. Option (c) is an objective
for Incident Management and option (d) is an objective for Event Management.
7. c - Major is not a type of Event but a type of Incident.
8. d - All of the options can be used to structure and locate a Service Desk. In reality, an
organization may need to implement a structure that combines a number of these
options to fully meet the business needs.
9. d - Closing all resolved Know Errors is a responsibility of Problem Management.
10. a
CSI
1. d - The activities in PDCA are Plan, Do, Check and Act.
2. d - All the options are basic reasons to monitor and measure.
3. c - Option (a) is an objective for Financial management. Option (b) is an objective for
Service Design, and (d) is an objective for Problem Management.