Mentor EM for eddy current weld inspection makes inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices.
Mentor EM for eddy current weld inspection makes inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices.
Mentor EM for eddy current weld inspection makes inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices.
current weld inspection. Mentor EM More experience in every inspection. This powerful new technology makes eddy current weld inspections easier, more accurate, and faster. By allowing the workows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices. Transforming Nondestructive Testing Portable eddy current testing instrument with industry-dening signal-to- noise ratio Reduces need for paper and manuals Large, bright, high-denition touchscreen that can be used while wearing gloves No knobs, dials, or switches to mistakenly adjust during use Superior IP rating and rugged cast magnesium housing to withstand harsh work environments Multiple alarm gates, which can be set to color or sound, to warn of possible defects Specications Battery Size 62 watt-hours/air transport compliant Battery Life 4 hours for most conditions 90-minute charge time Extended battery pack adds 6 hours Generators 2 generators and 2 connectors 2 time slices max per generator 4 frequency simultaneous injection Display 10.4" XVGA 1024 x 768 Projected capacitive touch Frequency Range 10 Hz6 MHz Sample Rate (max) 50 kHz Receiver Gain 034 dB Gain 0120 dB in 0.1 dB steps Drive Voltage 0.5, 1, 2, 4, 8, and 16 VPP Gates Output 2 per channel Alarm Outputs 2 total, TTL levels, one per input One LED on instrument face, audio through Bluetooth (headset protocol) Operating Temperature -20 to 55C Storage 8 GB SSD Connectivity Wi-Fi; 6 Bluetooth channels Dimensions 2.5 kg without modules; 295 mm x 230 mm x 60 mm 2.9 kg with 2-probe connector module and connectivity module Image Formats BMP, JPG Video Formats MPEG 4, Type 10 Workow Launcher Calibrate for Paint Layer Workow Description Calibrate for Weld Equipment Used Picture/Video Instruction Perform Inspection Workow-On-Device Instantly Collaborate and Access Information Connect to local network to share data and collaborate remotely with experts in real time Immediately download the most up-to-date procedures and workows Bluetooth enabled Mentor Create Software Tailor on-device inspection workow applications for technicians of all levels Aid inspectors by placing photos, procedures, and videos on device for reference while setting up, acquiring data, or analyzing data Limit range of adjustments available to the operator; and therefore limit the opportunity to make errors Use in Expert Mode as well as Workow-on-Device mode Weld Probes for All Use Conditions Complete Line of Wide-Frequency Probes Standard, high-wear, high-temperature, and cableized models for all job requirements 2013 General Electric Company. All rights reserved. GEA31023 11/2013 Straight 90 Inline Tip 90 Right Angle Tip Straight Probes Frequency Cable Length Disconnect 7/32" Straight 450 kHz2.5 MHz 6" 632-267-002 Probe 12" 632-267-012 3/8" Straight 60 kHz1.2 MHz 6" 632-266-002 632-266-008 12" 632-266-012 5/8" Straight 60 kHz700 kHz 6" 632-265-002 632-266-009 12" 632-265-012 90 Tipped Probes 7/32" inline, 1/4" drop 450 kHz2.5 MHz 6" 632-267-102 632-267-108 12" 632-267-112 3/8" inline, 1/4" drop 60 kHz1.2 MHz 6" 632-266-102 632-266-108 12" 632-266-112 5/8" inline, 1/4" drop 60 kHz700 kHz 6" 632-265-102 12" 632-265-112 5/8" 90, 1/4" drop 60 kHz700 kHz 6" 632-265-102 12" 632-265-112 High-Wear Straight Probes 3/8" High-wear (ceramic tip) 60 kHz1.2 MHz 632-266-011 5/8" High-wear (ceramic tip) 60 kHz700 kHz 6" 632-265-003 632-265-011 5/8" High-wear (SST) 60 kHz700 kHz 632-265-018 High-Temperature Probes 5/8" Straight Handle Length 6" 60 kHz700 kHz 632-265-008