Professional Documents
Culture Documents
Mech III & IV NMAMIT Syllabus
Mech III & IV NMAMIT Syllabus
1
ENGINEERING MATHEMATICS III
Subject Code : 12ME 301 Credits : 04
Hrs/Week : 4 Total Hours : 52
Prerequisites:
Vector algebra, infinite series, differentiation and integration,
knowledge of complex numbers.
Course learning Objectives: At the end of the course the student is
expected to:
1. know the application of vector calculus in engineering field.
2. apply the results of topics like complex variables, Fourier
Analysis, Z-transforms etc to solve engineering problems.
UNIT I
Vector Calculus: Vector algebra, Vector differentiation- gradient,
divergence, curl, laplacian, solenoidal and irrotational vectors,
Curvilinear, Spherical & Cylindrical Co- ordinates. 10 Hrs
UNIT II
Vector integration- Line, Surface & Volume integrals. Greens,
Gauss divergence & Stokes theorems. Applications. 8 Hrs
UNIT III
Theory of complex variables: Functions of complex variables,
Cauchy Riemann equations. Properties of analytic functions,
conformal mapping. Bilinear transformations.
Line integrals in complex plane, Cauchys theorem, Power series,
Residues, Cauchys residue theorem. 12 Hrs
UNIT IV
Fourier Analysis: Periodic functions, Eulers formulae, Fourier series
of odd and even functions, functions with arbitrary period, half range
series. Harmonic Analysis. Fourier integral theorem, Fourier
Transforms, Inverse Fourier transform, Convolution theorem . Fourier
sine and Fourier cosine transforms, Inverse Fourier sine and Inverse
Fourier cosine transforms. 11 Hrs
UNIT V
Z transforms: Z-transform, standard forms, linearity property,
damping rule, shifting rule. Inverse Z-transform, Finite differences
and difference equations, Solving Difference equations using Z-
transforms. 11Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
2
TEXT BOOKS:
1) Kreysizg: Advanced Engineering Mathematics, J ohn Wiley and
Sons VI-Edition 2.
2) B.S.Grewal : Higher Engineering Mathematics 36
th
Edition.
REFERENCE BOOKS:
1) Wylie Ray ., Advanced Engineering Mathematics, 6
th
edn.,
McGraw Hill.Inc
2) Murray R. Spiegal: Vector Analysis, Schuam publishing Co.
MATERIAL SCIENCE AND METALLURGY
Subject Code : 12ME 302 Credits : 03
Hrs / Week : 3 Total Hours : 39
UNIT-I
Structure of crystalline solids: Fundamental concepts of unit cell,
space lattice, Bravaias space lattices, unit cells for cubic structure &
hcp, study of stacking of layers of atoms in cubic structure & hcp,
calculations of Atomic radius, Coordination Number and Atomic
Packing Factor for different cubic structures. Crystal imperfections-
point, line, surface & volume defects. Diffusion, Diffusion
Mechanism, Ficks laws of diffusion. 8 Hrs
UNIT-II
Fundamentals of solidification, nucleation and its types, crystal
growth, cast structure. Solid solutions: Types, Rules governing the
formation of solids solutions. Phase diagrams: Basic terms, phase
rule, cooling curves, construction of phase diagrams, interpretation of
equilibrium diagrams, Types of phase diagrams. Lever rule, Problems
on Phase diagrams 8 Hrs
UNIT-III
Iron carbon equilibrium Diagram, Micro constituents in the FeC
system, Invariant reactions, critical temperatures, Microstructure of
slowly cooled steels, effect of alloying elements on the Fe-C diagram,
ferrite & Austenite stabilizers. Solidification of iron-carbon alloys,
The TTT diagram, drawing of TTT diagram, TTT diagram for hypo &
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
3
hypereutectoid steels, effect of alloying elements, CCT diagram.
Annealing and its types, normalizing, hardening, tempering,
martempering, austempering, surface hardening like case hardening,
carburizing, cyaniding, nitriding, Induction hardening. Hardenabilty,
J ominy end-quench test, Age hardening of Al & Cu alloys. 10 Hrs
UNIT-IV
Hardness: Rockwell, Vickers & Brinells Hardness testing. Plastic
deformation, slip and twinning.strain hardening, strain aging,
Bauschinger effect, Recovery, Recrystallisation and grain growth.
Fracture: types, stages in cup & cone fracture, Griffiths criterion.
Notch effect, ductile-brittle transition. Fatigue: fatigue tests,
mechanism, S-N curves, Factors affecting fatigue life, and protection
methods. Creep: Various stages of creep, Mechanisms of creep, effect
of temperature, creep fracture, stress relaxation, Creep resistant
materials. 8 Hrs
UNIT-V
Engineering Alloys: Properties, composition and uses of low,
medium, and high carbon steels. Steel: Method of designation as per
AISISAE. Cast irons: Gray CI, White CI, Malleable CI, SG iron.
Microstructures of cast iron. Light alloys: Aluminum, Magnesium &
Titanium alloys. Copper & its alloys: Brasses & Bronzes. Advanced
Materials: Types of Fibres & Matrix, and applications of Composites,
Ceramics, Optical, Smart Materials, Powder metallurgy and
Introduction to shape memory alloys, nuclear, space and high
temperature materials. 8 Hrs
TEXT BOOKS:
1. Materials Science & Engineering- An Introduction, William D.
Callister J r. Wiley India Pvt. Ltd. 6th Edition, 2006, New Delhi.
2. Essentials of Materials for Science and Engineering, Donald R.
Askeland, Pradeep P.Phule Thomson-Engineering, 2006.
REFERENCE BOOKS:
1. Introduction to Material Science for Engineering, 6th edition
J ames F. Shackel Ford. Pearson, Prentice Hall, New J ersy, 2006.
2. Physical Metallurgy, Principles & Practices, V Raghavan. PHI,
2
nd
Edition ,2006, New Delhi.
3. Foundation of Material Science and Engineering, W.F.Smith,
3rd Edition McGraw Hill, 1997.
Scheme Examination:
TWO questions to be set from each UNIT and Students shall answer
FIVE full questions choosing at least ONE question from each UNIT.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
4
BASIC THERMODYNAMICS
Subject Code : 12ME 303 Credits : 03
Hrs / Week : 3 Total Hours : 39
UNIT- I
Fundamental Concepts & Definitions:
Characteristics of system boundary and control surface; surroundings;
fixed, moving and imaginary boundaries, examples. Thermodynamic
state, state point, identification of a state through properties; definition
and units, intensive and extensive various property diagrams, Path and
process, quasi-static process, cyclic and non-cyclic processes.
Thermodynamic equilibrium: definition, mechanical equilibrium;
diathermic wall; thermal equilibrium, chemical equilibrium. Zeroth
law of thermodynamics.Temperature as an important property-
Temperature measurement.
Work and Heat
Mechanics: definition of work and its limitations. Thermodynamic
definition of work and heat. Examples & sign convention.
Displacement work as part of a system boundary and as whole of a
system boundary. Expressions for displacement work in various
processes through p-v diagrams (numerical problems). Shaft work;
Electrical work. Other types of work, examples of practical
applications. 4 Hrs
UNIT- II
First Law of Thermodynamics
Statement of the First law of thermodynamics for a cycle, derivation
of the First law of processes. Internal energy as a property,
thermodynamic distinction between energy and work; concept of
enthalpy, definitions of specific heats at constant volume and at
constant pressure. Extension of the First law to control volume; steady
state-steady flow energy equation (Numerical problems). Important
applications such as flow in a nozzle, throttling, and adiabatic mixing
etc. 8 Hrs
UNIT- III
Pure Substances
Definition of a pure substance, phase of a substance, triple point and
critical points. Sub-cooled liquid, saturated liquid, vapour pressure,
two phase mixture of liquid and vapour, saturated vapour and
superheated vapour states of a pure substance. Representation of
properties of pure substance on p-T and p-V diagrams.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
5
Ideal & Real Gas Mixtures
Differences between perfect, ideal and real gases. Equation of state.
Evaluation of properties of perfect and ideal gases. Introduction. Van
der Waals Equation of state, Van der Waal's constants in terms of
critical properties, law of corresponding states, compressibility factor;
compressibility chart(Numerical problems). other equations of state.
Ideal gas mixtures: Daltons law, Properties of ideal gas mixtures.
5 Hrs
UNIT- IV
Second Law of Thermodynamics
Devices converting heat to work and vice versa in a thermodynamic
cycle, thermal reservoirs. heat engine and a heat pump. Schematic
representation and efficiency and coefficient of performance. Carnot
cycle-explanation and arrangements. Identifications of directions of
occurrences of natural processes, Offshoot of II law from the Ist.
Kelvin-Planck statement of the Second law of Thermodynamic;
Clasius's statement of Second law of Thermodynamic; Equivalence of
the two statements (numerical problems). Definition of Reversibility,
examples of reversible and irreversible processes; factors that make a
process irreversible. Reversible heat engines. 10 Hrs
UNIT- V
Entropy
Entropy; definition, a property, principle of increase of entropy,
entropy as a quantitative test for irreversibility; Calculation of entropy,
role of T-s, h-s diagrams. Use of steam table and mollier chart for
determining entropy. Representation of heat quantities; Entropy
generation in closed system. Numerical problems. 5 Hrs
Basics of psychrometry
Psychrometry: Basic definition, properties of atmospheric air,
psychrometer, adiabatic saturation process, simple psychrometric
processes. Simple numerical problems. 3 Hrs
TEXT BOOKS:
1 Engineering Thermodynamics, P.K.Nag , McGraw Hill, III
Edition, 2005
2 Thermodynamics- an Engineering Approach, Yunus A
Cengel/Michael A Bolas, McGraw Hill, 3
rd
edition, 1998
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
6
REFERENCE BOOKS:
1 Fundamentals of Thermodynamics, Sonntag, Borgnakke, Van
Wylen, 6
th
edition, 2003
2 Engineering Thermodynamics, Gordon Rogers/Yon Mayhew,
AWL, 4
th
edition 2001
Scheme Examination:
TWO questions to be set from each unit and Students shall answer
FIVE full questions choosing at least ONE question to be
answered from each unit.
MANUFACTURING PROCESSES-I
Subject Code : 12ME 304 Credits : 03
Hrs / Week : 3 Total Hours : 39
UNIT- I
Casting Process:
Concept of manufacturing process, its importance, Classification.
Introduction to Casting Process- steps involved Advantages
and Limitations.
Patterns-types-materials-pattern allowances
Sand casting; Moulding sand Properties,types,binder and
additives conditioning and testing
Cores- Types-Core sand & core making.
Hand and machine moulding processes and equipment 8 Hrs
UNIT- II
Special Casting Processes:
CO
2
Moulding , Shell moulding, Investment Casting, slush casting.
Die casting Gravity die casting Pressure die casting
Centrifugal casting, Continuous casting.
Melting furnaces : Cupola Construction & Operations &
zones.
Advanced casting processes Squeeze casting, Thixo casting.
Casting defects 8 Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
7
UNIT -III
Hot and Cold working metals
Rolling, Forging, Principle of Extrusion, Drawing.
Press working Press working operations & tools, simple
compound & progressive dies.
HERF, Explosive forming, Electro hydraulic forming, Magnetic
pulse forming 10 Hrs
UNIT -IV
Welding (Joining Process)
Classifications & Advantages and applications.
Arc welding- Principle & Equipment, power source TIG, MIG,
SAW & Atomic hydrogen arc welding.
Gas welding Principle & Equipment, types of flames
Resistance welding and principle Seam butt, Spot and
Projection welding 8 Hrs
UNIT-V
Advanced welding processes
Principle equipment operation and process parameters of
Ultrasonic, Laser, Explosive, Electron beam, Plasma arc welding
processes.
Soldering, brazing and Adhesive bonding process
Welding defects, Inspection- visual, magnetic, Radiography,
Eddy current. 8 Hrs
TEXT BOOKS:
1. Manufacturing technology, Foundry, Farming and welding by P.
N. Rao, Tata drew Hill, New Delhi.
2. Manufacturing technology, by Scrope Kalpakjian.
3. Production Technology, D.P.Khanna.
REFERENCE BOOKS:
1. Materials and processes in manufacturing, by E.Paul Degarmo.
2. Processes and materials of manufacture, By Roy A. Lindburg.
3. Principles of metal casting, by Rosenthal.
Scheme Examination:
TWO questions to be set from each unit and Students shall answer
FIVE full questions choosing at least ONE question to be
answered from each unit.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
8
MECHANICS OF MATERIALS
Subject Code : 12ME 305 Credits : 04
Hrs /Week : 4 Total Hours : 52
UNIT-I
Simple stress and strain: Introduction, stress, strain, mechanical
properties of materials, Linear elasticity, Hookes Law and Poissons
ratio, Stress-Strain relation behaviour in Tension for Mild steel and
non ferrous metals. Extension / Shortening of a bar, bars with cross
sections varying in steps, bars with continuously varying cross
sections (circular and rectangular), Elongation due to self weight,
Principle of super position. 7 Hrs
Stress in composite section: Volumetric strain, expression for
volumetric strain, elastic constants, simple shear stress, shear strain,
temperature stresses (including compound bars). 6 Hrs
UNIT-II
Compound stresses: Introduction, plane stress, stresses on inclined
sections, principal stresses and maximum shear stresses, Mohrs circle
for plane stress. 7 Hrs
Thick and thin cylinders: Stresses in thin cylinders, changes in
dimensions of cylinder (diameter, length and volume), Thick cylinders
subjected to internal and external pressures (Lames equation),
(compound cylinders not included). 6 Hrs
UNIT-III
Bending moment and Shear force in beams : Introduction, Types of
beams, loads and reactions, shear forces and bending moments, rate of
loading, sign conventions, relationship between shear force and
bending moments, shear force and bending moment diagrams for
different beams subjected to concentrated loads, uniform distributed
load (udl) and couple for different types of beams. 7 Hrs
UNIT IV
Bending and shear stresses in beams: Introduction, theory of simple
bending, assumptions in simple bending, relationship between
bending stresses and radius of curvature, relationship between bending
moment and radius of curvature, moment carrying capacity of a
section, shearing stresses in beams, shear stress across rectangular,
circular, symmetrical I and T sections (composite / fletched beams not
included). 7 Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
9
UNIT-V
Deflection of beams: Introduction, differential equation for
deflection, equations for deflections, slope and moments, double
integration method for cantilever and simply supported beams for
point load, UDL, UVL and Couple, Macaulays method. 6 Hrs
Torsion of circular shafts and Elastic stability of columns:
Introduction, pure torsion, assumptions, derivation of torsional
equations, polar modulus, torsional rigidity / stiffness of shafts, power
transmitted by solid and hollow circular shafts. Introduction to
columns, Eulers theory for axially loaded elastic long columns,
derivation of Eulers load for various end conditions, limitations of
Eulers theory, Rankines formula. 6 Hrs
TEXT BOOKS:
1. Mechanics of Material by J ames Gere - Thomson learning,5
th
edition,2004
2. Mechanics of Materials, by Ferdinand P. Beer E. Russell J ohnsson,
J r. J ohn T. Dewolf Mc-Graw Hill International, 2003
REFERENCE BOOKS:
1 Mechanics of Materials, by F. E. Miller & H. A. Doeringsfeld, Intl.
Text Book Company.
2 Mechanics of Materials by E P Popov, Prentice Hall of India Pvt.
1978.
3 Engineering Mechanics by Timoshenko & Young, Tata McGraw
Hill Book Publishing Co. Ltd. 1985
4 Applied Strength of Materials, by Robert L. Mott, Prentice Hall
India Pvt. Ltd., 4
th
edition
5 Theory and Problems of Strength of Materials, William A.
NashSchaum's Outline Series, McGraw Hill International Editions,
Third Edition, 2007
Scheme Examination:
TWO questions to be set from each unit and Students shall answer
FIVE full questions choosing at least ONE question to be
answered from each unit.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
10
COMPUTER AIDED MACHINE DRAWING
Subject Code : 12ME 306 Credits : 03
Hrs /Week : 6 Total Hours : 39
UNIT I
INTRODUCTION: Introduction to machine drawing: Importance
of sectional view in machine drawing. Section of solids: sectional
views and true shape of cut surface of simple solids like prism,
pyramid, cone, cylinder, cube and tetrahedron. (Resting on base only-
3 problems) Free hand sketching of: Orthographic views of simple
machine parts with section from Isometric views. 9 Hrs
UNIT II
FITS AND TOLERANCES: Limits, fits and tolerances-need, types,
representation of tolerances on drawing, calculation of minimum and
maximum clearances and allowances. Geometric tolerance: uses, types
of form and position tolerances, symbols, method of indicating
geometric tolerances on part drawings. Surface finish symbols-
methods of indicating the surface roughness. Blue print reading
exercises. 3 Hrs
UNIT III
ASSEMBLY CONCEPTS: Methods and concepts of assemblies-
assembly requirements, Bill of materials. Methods of assembly of
bolts, nuts, studs, screws and pins. Methods of arresting motion of
members in an assembly, Assembly and dismantling exercise of a
typical assemblies with emphasis on assembly sequence and
appropriate fits. 3 Hrs
UNIT -IV
ASSEMBLY DRAWING PRACTICE: Making free hand sketches
of typical subassemblies-flange coupling, stuffing box, journal
bearings, rolling element bearings, keyed joints, cotter joints, C clamp.
6 Hrs
UNIT V
ASSEMBLY USING SOLID MODELING: Modeling and assembly
using software-extracting views and sections. Drawing assemblies of:
Plummer block, machine vice, stop valve, screw jack, tail stock, 3 jaw
chucks and simple drill jig. Creation of bill of materials; checking
Interference between solids. 24 Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
11
TEXT BOOKS:
1. A Primer on CAMD, VTU
2. Machine Drawing by K. R. Gopala Krishna
REFERENCE BOOKS:
1. A Text book of CAMD by Tryambaka murthy
2. Machine Drawing by N.D. Bhatt
3. Auto CAD 2006 for Engineers and Designers by Sham Tickoo
Scheme Examination:
ONE question from unit-I for 20 marks.
ONE question from unit IV for 20 marks.
ONE question from unit V for 60 marks.
MATERIAL TESTING LABORATORY
Subject Code : 12ME 307 Credits : 02
Hrs /Week : 3
PART A
1. Tensile, shear and compression tests of metallic and non metallic
specimens using a Universal Testing Machine.
2. Torsion tests.
3. Bending Test on metallic and nonmetallic specimens.
4. Izod and Charpy tests on M.S. Specimen.
5. Brinell, Rockwell and Vickers Hardness test.
6. Fatigue Test.
PART B
1. Preparation of specimen for Metallographic examination of
different engineering materials. Identification of microstructures of
materials like, plain carbon steel, tool steel, gray C.I, SG iron,
Brass, Bronze and composites.
2. Heat treatment: Annealing, normalizing, hardening and tempering
of steel. Hardness studies of heat-treated samples.
3. To study the wear characteristics of ferrous, non-ferrous and
composite materials for different parameters.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
12
4. Non-destructive test experiments like,
(a) Ultrasonic flaw detection
(b) Magnetic crack detection
(c) Dye penetration testing, to study the defects of Cast and
Welded specimens
Scheme of Examination:
Two experiments to be conducted from part - A
One experiment from Part B
Viva - Voce: 10 Marks
Total: 50 Marks
INDIVIDUAL EFFECTIVENESS LABS (IEL)
Subject Code : 12ME308 Credits : 02
Hrs / Week : 4 Total Hours : 52
Introduction
Entry Edge (E
2
) is an industry readiness program designed for
technology undergraduates to help them enhance important individual
behavior & skills, and become productive from the very beginning of
their corporate carrier. The program places a high emphasis on the
pedagogy of learning by doing.
As part of the program, students first go through individual behavior
& skill labs (Individual Effectiveness Labs) in their II year of
engineering curriculum and then participate in hands on and minds
on team activities in a simulated work environment, to accomplish
tasks and to solve real-world organizational issues during a week long
Immersive Group Workshop (IGW) held in the III year of their
engineering course.
This document provides the syllabus and evaluation framework for
Individual Effectiveness Labs (IEL).
Objectives:
1. To help the students understand themselves. Identify and analyze
personality/behavioral attributes of personal effectiveness
exploratory orientation, self-disclosure, receptivity to feedback and
sensitivity to others.
2. To help the students identify their primary and secondary
motivators what drives them for achievement?
a. Understanding the students need for achievement
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
13
b. Understanding how positive expectations lead to positive
results.
3. To help the students to develop a goal driven mindset and to take
the first steps into individual personal planning, controlling and
measuring results.
4. To make the students aware of importance of communication and
typical barriers to communication.
5. To help the students develop effective oral communication skills.
6. To help the students develop effective written communication
skills.
7. To help the students develop listening skills.
8. To help the students participate in group discussions.
9. To help the students develop effective business presentation skills.
10. To help the students receive feedback with an open mind, respond
to feedback and take the action on them.
11. To help the students develop time management and organization
skills.
CONTENTS:
Module 1: Know Yourself
Self assessment profilers to identify and assess the following
Identify and analyze personality/behavioral attributes of personal
effectiveness exploratory orientation, self disclosure, receptivity to
feedback, sensitivity to others. 8Hrs
Module 2: Achievement Motivation & Goal Setting
Identifying primary and secondary motivators using a
motivational profiler.
Understanding need for achievement.
Developing goal driven mindset.
First steps into career planning.
Module 3: Communication Skills
Effective oral communication
Effective written communication
Constructing effective messages (memo, letters, e-mails)
Writing persuasively
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
14
Correspondence etiquettes letters & email
Importance of listening responsively
Handling conversations
Effective group discussions 14Hrs
Module 4: Presentation Skills
Understanding audience, presentation objectives, best practices
& tools in preparation of presentation.
Improving quality of presentation through better use of voice,
eyes, gestures, visual aids.
Presenting to groups
Presenting one-on-one. 10Hrs
Module 5: Handling Feedback
Seeking feedback
Accepting feedback with an open mind
Responding to feedback
Actionizing feedback 6Hrs
Module 6: Time Management
Introduction to Time Management and importance of managing
self
Beating procrastination
Action plans-starting to achieve in a small way
Scheduling skills 6Hrs
Reference Books
1. Business communication by Asha Kaul, Prentice-Hall of India
Pvt.Ltd.
2. Online reference materials provided as part of the Entry Edge
program.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
15
FOUNDRY, FORGING & WELDING
LABORATORY
Subject Code : 12ME 309 Credits : 02
Hrs / Week : 3
PART A
1. WELDING
Preparation of specimens for welding and conduction of the welding
exercises of following joints:
1) Lap J oint
2) Butt J oint
3) L-J oint.
4) T-J oint
PART B
2. Forging Operations
Preparation of minimum forged models involving: Upsetting, Drawing
and bending operations.
PART C
3. Foundry Practice
Study and practice of: Use of foundry tools and other equipments.
Preparation of moulds using two molding boxes using: Patterns (Split
pattern, Match plate pattern and Core boxes).
Preparation of moulds using: Two molding boxes without patterns.
4. Testing of Molding sand and Core sand
Preparation of sand specimens and conduction of the following tests:
1) Compression, Shear and Tensile tests on Universal Sand
Testing
2) Permeability test
3) Clay content test.
4) Moisture content test.
Scheme of Examination:
One question is to be set from Part-A: 10 marks
One question is to be set from either
Part-B or Part-C: 30 marks
Viva-Voce: 10 marks.
Total: 50 marks.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
16
ENGINEERING MATHEMATICS-IV
Subject code : 12ME401 Credits : 04
Hrs/Week : 4 Total Hours : 52
Prerequisites:
Set Theory , Calculus , differential equations and finite differences.
Course learning Objectives: At the end of the course the student will
be able to
1. understand and appreciate probabilitistic models for situations
involving chance effect.
2. learn some probability distributions both discrete and continuous
and its applications in real life problems.
3.. Apply numerical methods to solve engineering problems where the
analytical solutions for some functions are not possible.
4. Apply Numerical methods to solve partial differential equations.
UNIT I
Introduction to probability, finite sample space, conditional
probability and independence. Bayes theorem. One dimensional
random variable: discrete and continuous random variable, probability
distribution function, cumulative distribution function. Mean and
variance. 10 Hrs
UNIT - II
Probability distributions and Curve fitting: Binomial, Poisson,
Normal, Exponential distributions.Curve fitting: curve fitting by the
method of least squares: y=a+bx, y=a+bx+cx
2
, y=ab
x
.Correlation
and regression. 10 Hrs
UNIT - III
Numerical Analysis: Roots of algebraic and transcendental equations:
Regula falsi & Newton Raphson method. Finite differences, Newton-
Gregory forward and backward difference interpolation formulae,
Lagranges interpolation formula, Lagranges Inverse interpolation
formula. Numerical differentiation using Newtons forward &
backward formulae.
Numerical integration: General quadrature formula, Trapezoidal rule,
Simpsons one third rule, Simpsons, three eight rule. 12 Hrs
UNIT - IV
Numerical solution of first order ordinary differential equations:
Taylors series Method, Modified Eulers method,Runge Kutta 4
th
order Method.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
17
Partial differential equations:. Formation of partial differential
equations by elimination of arbitrary constants and arbitrary functions.
Classification of second order pardial differential equations. Solution
of PDEs by the method of separation of variables, method of
transformation. Numerical solutions of Laplace and Poisson equations
by standard five point formulae, heat and wave equations by
explicitmethod. 12 Hrs
UNIT V
Series solution of Ordinary Differential equations and Special
functions: Series solution-Frobenius method, Series solution of
Bessels D.E leading to Bessel function of first kind. The generating
function for J
n
(x). Orthogonality of Bessel functions. Series solution
of Legendres D.E. leading to Legendre polynomials. Rodrigues
formula. The generating function for P
n
(x). Orthogonality of Legendre
polynomials. 8 Hrs
TEXT BOOKS:
1) P.L. Meyer : Introduction of probability and Statistical applications,
second Edn. 1975, American Publishing Co.
2) B.S.Grewal : Higher Engineering Mathematics 36
th
Edition.
REFERENCE BOOKS:
1. S.S.Sastry: Introductory methods of Numerical Analysis-2
nd
edn.1990; Prentice Hall.
2. Wylie Ray ., Advanced Engineering Mathematics, 6
th
edn.,
McGraw Hill.Inc
KINEMATICS OF MACHINES
Subject Code : 12ME 402 Credits : 04
Hrs /Week : 5 Total Hours : 52
UNIT- I
INTRODUCTION : Definitions : Link or element, kinematic pair ,
Kinematic chain, structure, mechanism, degrees of freedom, Grublers
Criteria ( without derivation) Mobility of Mechanism, Inversion ,
Machine . Kinematic chain with three lower pairs, Practical
applications of four bar chain. 4 Hrs
KINEMATIC CHAINS AND INVERSIONS: Inversions of Single
slider crank chain and Double slider crank chain.
MECHANISMS: Quick return mechanisms Crank and slotted lever
Mechanism, Whitworth mechanism, Drag link mechanism. Straight
line motion mechanism Peaucelliers mechanism, Intermittent
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
18
motion mechanism Geneva mechanism and Ratchet and Pawl
mechanism. Toggle mechanism, Pantograph 6 Hrs
UNIT -II
Velocity and Acceleration analysis of mechanisms (GRAPHICAL
METHOD): Velocity and acceleration analysis of four bar
mechanism, slider crank mechanism and Simple mechanisms by
vector polygons, Relative velocity and acceleration of particles in a
common link. 6 Hrs
Velocity analysis by instantaneous centre method: Definition,
Kennedys Theorem and its applications to locate number of
instantaneous centers, Determination of linear and angular velocity
using instantaneous centre method. 5 Hrs
UNIT- III
Relative velocity and accelerations of coincident particles on separate
links Coriolis component of acceleration, Angular velocity and
angular acceleration of links KLEINS CONSTRUCTION: Analysis
of velocity and acceleration of single slider crank mechanism. 5 Hrs
CAMS: Types of cams, Types of followers, Displacement, velocity
and acceleration time curves for cam profiles. disc cam with
reciprocating follower having knife edge, roller and flat faced
follower, Disc cam with oscillating roller follower, Follower motions
including SHM, Uniform velocity, Uniform acceleration and
retardation and Cycloidal motion 6 Hrs
UNIT -IV
SPUR GEAR: Gear terminology, Law of gearing, velocity of sliding,
Involumetry, Involute function, Characteristics of Involute action,
Comparison of involute and cycloidal teeth, Path of contact, arc of
contact ,contact ratio, Interference in Involute gears, Methods of
avoiding interference, Determination of backlash. 10 Hrs
UNIT -V
GEAR TRAINS: Simple gear trains, Compound gear trains, reverted
gear trains, Epicyclic gear trains ,Tabular method of finding velocity
ratio of epicyclic gear trains. Tooth load and torque calculations in
epicyclic gear train 5 Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
19
Belt and Rope drives: Ratio of tensions, Centrifugal stress in a belt
or rope, Power transmitted, effect of centrifugal tension on power
transmitted, Numerical problems. 5 Hrs
TEXT BOOKS:
1. Theory of Machines , by Rattan S.S., Tata Mc Graw Hill
2. Theory of Machines by Thomas Bevan
3. Mechanisms and Dynamics of machinery by Mabie and Ocvirk
4. Mechanics of Machines by Ham, Cranes and Rogers.
REFERENCE BOOKS:
1. Theory of Machines by V.P.Singh
2. Theory of Machines & Mechanisms by Shigley J .V. & Uickers J .J .
3. Theory of Machines by Ballaney.
APPLIED THERMODYNAMICS
Subject Code : 12ME 403 Credits : 03
Hrs /week : 3 Total Hours : 39
UNIT -I
Vapour Power Cycles
Carnot vapour power cycle & its associated difficulties; Simple
Rankine cycle description, T-s diagram & analysis of performance;
Application to thermal power plants. Comparison of Carnot and
Rankine cycles; Effect of pressure and temperature on Rankine cycle
performance; Numerical problems. Reheat Rankine cycle; HPT and
LPT steam expansion; Efficiency of reheat cycles; Numerical
problems. Ideal and practical regenerative Rankine cycles; open and
closed feed water heaters; Efficiency of regenerative cycles; 8 Hrs
UNIT- II
Gas Power Cycles
Air standard cycle approximations; Carnot, Otto, Diesel, Dual Cycles
p-v and T-s diagrams; Numerical Problems. Stirling cycle; Basic
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
20
Gas turbine (Brayton) cycle (for open and closed systems). Efficiency
of gas turbine cycle; Regenerative gas turbine cycle; Inter-cooling and
reheating in gas turbine cycles; Numerical problems. 8 Hrs
UNIT -III
Reciprocating Compressors
Single stage reciprocating compressor cycle without clearance;
Work input and power through p-v diagrams; Effect of clearance on
volumetric efficiency and, Work input through p-v diagrams;
Adiabatic, isothermal and mechanical efficiencies; Multi-stage
compressors: Advantages. Effect of intercooling on work input in
multi-stage compression; Optimum intermediate pressure (general
case); Numerical problems. 6 Hrs
Flow through nozzles:
1 D isentropic flow in a variable area duct; critical pressure; Choking
in a isentropic flow; shapes of supersonic and subsonic nozzles and
diffusers; steam nozzles.(descriptive only) 2 Hrs
UNIT- IV
Refrigeration Cycles
Reversed Carnot cycle and its limitations; Basic vapour compression
refrigeration system; Refrigeration effect; COP; Unit of refrigeration;
p-h & T-s diagrams. Practical vapour compression refrigeration
system; Numerical problems. Vapour absorption refrigeration system
& COP; Comparison between VCRS and VARS and their applications
(descriptive only). Air cycle refrigeration; Reversed Brayton cycle;
Numerical problems 6 Hrs
Use of psychrometry for air conditioning application:
Brief review on construction and use of psychometric chart;
Representation of various processes heating, cooling, dehumidifying
and humidifying. Adiabatic mixing of stream; sensible cooling load
and latent cooling loa; summer and winter air conditioning;
(descriptive only) 3 Hrs
UNIT -V
I C engine & combustion
Stoichiometric air for combustion of fuels; Excess air; Insufficient air,
Mass balance; A/F ratio; exhaust gas analysis (Orsat apparatus);
Numerical problems. I C engine performance measurement;
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
21
calculation of IP, BP, bmep, bsfc, brake thermal efficiency; volumetric
efficiency; and heat balance sheet. Numerical problems. 8 Hrs
TEXT BOOKS:
1. Engineering Thermodynamics, P.K.Nag, Tata McGraw Hill.
2. Engineering Thermodynamics, C.P.Gupta, Rajendra Prakash, ,
Nemi Chand & Bros
REFERENCE BOOKS:
1. 1. Applied Thermodynamics, Roy and Chaudary,
2. 2. Energy Conversion, Kadambi & Prakash,
3. Applied thermodynamics, D Eastop and A McConkey, V Ed,
Pearson
4. Thermal Engineering, R K. Rajput,
5. Thermodynamics, by Yunus A Cengel, Michael A Boles
6. Thermodynamic Data Hand Book by Dr. Nijaguna & Dr. B. S.
Samaga
MANUFACTURING PROCESSES - II
Subject Code : 12ME 404 Credits : 04
Hrs /Week : 4 Total Hours : 52
UNIT- I
Theory of metal cutting
Single point tool terminology
Chip formation types
Merchants analysis
Tool wear
Tool life
Machinability
Cutting tool materials
Cutting Fluids 12 Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
22
UNIT- II
Lathe
Centre Lathe Constructional tendencies - Driving and feeding
mechanisms, operations
Production lathe Capstan and Turret lathe Constructional
Features- mechanisms tool layout
Drilling machine Classification Construction Radial drilling
machine. Drilling machine operations, drilling machine tools
Twist drills, Reamers and taps terminology, material and
designation. 10 Hrs
UNIT - III
Milling Machines
Classification, construction of column, knee type and planer type
milling machines
Milling cutters, classification, Terminology.
Milling operations.
Indexing: universal dividing head , indexing operations
Principle of shaping, Planning and slotting mechanisms 10 Hrs
UNIT - IV
Grinding:
Abrasives: Matural and Artificial.
Grinding wheel: Construction, designation, selection, mounting,
balancing, glazing and loading, truing and dressing.
Grinding machine classification cylindrical centre type
centre less- Surface girinding.
Micro finishing operations lapping honing superfinishing.
10 Hrs
UNIT - V
Non conventional machining
Mechanical USM AJ M WJ M.
Thermal & electro thermal EDM, LBM, PAM.
Chemical Electro Chemical ECM, ECH. 10 Hrs
TEXT BOOKS:
1. Manufacturing Technology: Metal cutting and machine tools by P
N Rao.
2. Fundamentals of metal cutting and machine tools by J unneja and G
S Shekhar
REFERENCE BOOKS:
1. Processes and Materials manufacture. By Roy and Lindberg
2. Production Technology R K J ain.
3. Production technology H M T.
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
23
4. Workshop technology vol. II Hajra Choudury.
5. Manufacturing technology Serope Kalpakjian.
Scheme Examination:
Two questions to be set from each unit and Students shall answer
FIVE full questions choosing at least ONE question to be answered
from each unit.
FLUID MECHANICS
Subject Code : 12ME 405 Credits : 04
Hrs/Week : 4 Total Hours : 52
UNIT- I
Properties of fluid: Introductory concepts and definitions, properties
of fluids and its classification. Fluid Statics: Pascals law of pressure,
pressure variation in static fluid, manometers, hydrostatic force on
submerse plane and curved surfaces. 11 Hrs
UNIT -II
Buoyancy and stability criteria:
Fluid kinematics: Fluid flow concepts, lines flow, Types of functions
for 2-D flow, relationship between them and flow nets. Fluid
Dynamics: general energy and momentum equation. Eulers equation,
Bernoullis equation for real fluids. 10 Hrs
UNIT - III
Dimensional analysis: Introduction-derived quantities, dimensions of
physical quantities, dimensional homogeneity, Buckinghams
theorem, Raleighs method, dimensionless numbers, similitude, types
of similitude, Model testing
Laminar and viscous flow effects: Reynolds number, critical
Reynolds number, laminar flow through circular pipe, Hagen
Poiseulles equation, laminar flow between parallel and stationary
plates. 10 Hrs
UNIT-IV
Fluid flow measurements: Venturimeter, orificemeter, pitot tube, V
and rectangular notch, Flow through pipes: frictional losses in pipe
flow, Darcy- Weisbach equation, Chezys equation for loss of head
due to friction in pipes, hydraulic gradient and total energy line
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
24
11 Hrs
UNIT-V
Flow past immersed bodies: Drag, Lift, expressions for lift and drag,
pressure drag and friction drag, boundary layer concept, displacement
thickness, momentum thickness and energy thickness. Introduction
to compressible flow: Velocity of sound in a fluid, Mach number,
propagation pressure wave in compressible fluid. 10 Hrs
TEXT BOOKS:
1. Fluid Mechanics by Yunus A Cengel, J ohn M, Tata Mc Graw Hill,
2006
2. Fluid Mechanics by Dr. R K Bansal, Laxmi publications, 2004
REFERENCE BOOKS:
1. Engineering Fluid Mechanics by K.L. Kumar. Eurosia Publishing
House (P) Ltd, 1992.
2. Fluid mechanics by White, 5
th
Edition Tata Mc Graw Hill, 2003.
3. Fluid mechanics by Binder, ,Prentice Hall of India Pvt. Ltd. 1964.
4. Fluid Mechanics by Dr. J agadish Lal, Metropolitan Book company
Ltd, 1997
Scheme Examination:
Two questions to be set from each unit and Students shall answer
FIVE full questions choosing at least ONE question to be answered
from each unit.
ENGINEERING ECONOMICS
Subject Code : 12ME 406 Credits : 03
Hrs / Week : 3 Total Hours : 39
UNIT - I
Some fundamental economic concepts
Consumer goods, Producer goods, Factors of production, Economy of
organization,
Demand theory, Law of demand, Exceptions to law of demand, Law
of supply, Determinants of supply, Law of increasing returns and law
of diminishing returns(No exercises)
Classification of cost; First cost, operating and maintenance cost,
Fixed cost, Variable cost, Incremental and marginal cost, Sunk cost
and Life cycle cost 5 Hrs
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
25
Cost Accounting
Terminologies used in accounting, Profit and loss statement, Balance
sheet, Understanding basic financial ratios, Simple exercises. 4 Hrs
UNIT - II
Interest
Rate of interest, Determining rate of interest, Time value of money,
Simple interest, Compound interest, Nominal and effective interest
rate, Equivalence involving interest, Interest formulae [single
payment, uniform series and arithmetic gradient only], problems using
interest formulae [discrete compounding only]. 9 Hrs
UNIT III
Economic Analysis of Alternatives
Analysis based on: Present Worth [equal life and unequal life
situations], Future Worth, Payback Period, Capitalized Worth,
Equivalent Annual Worth, Exercises. 8 Hrs
UNIT IV
Economic Analysis of Alternatives
Rate of Return, Analysis based on Rate of Return, Exercises. 4 Hrs
Depreciation
Causes of depreciation, Methods of depreciation [Straight line,
Declining balance, Double declining balance], Depletion, Exercises
4 Hrs
UNIT V
Estimating and Costing
Components of cost [Material cost, Labour cost, Overhead expenses,
Prime cost, Factory cost, Total cost], Determination of selling price of
a product, Exercises
Estimation of cost for simple components, Exercises 6 Hrs
TEXT BOOKS:
1. Engineering Economics, Riggs J .L.,4
th
edition, Tata McGraw-Hill,
2004
2. Mechanical Estimating and Costing, Banga and Sharma
REFERENCE BOOKS:
1. Engineering Economy , E Paul Degarmo, Macmillan Publishing,
2001
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
26
2. Engineering Economy, Gerald J Thuesen & W J Fabrycky,
Prentice Hall of India, 9
th
ed.
3. Engineering Economics, Tarachand, Nemchand & Bros, 1996
4. Financial Management, I M Pandey, Vikas Publishing House,
2002
Scheme Examination:
Two questions to be set from each unit and Students shall answer
FIVE full questions choosing at least ONE question to be answered
from each unit.
ENERGY CONVERSION ENGINEERING LAB
Subject Code : 12ME 407 Credits : 02
Hrs /Week : 3
PART A
1. Determination of Flash point and Fire point of lubricating oil using
Abel Pensky and Pensky Martins Apparatus.
2. Determination of Caloric value of solid, liquid and gaseous fuels.
3. Determination of Viscosity of lubricating oil using Redwoods,
Saybolts and Torsion Viscometers.
4. Valve, Timing/port opening diagram of an I. C. engine (4 stroke/2
stroke).
5. Use of planimeter. 21Hrs
PART B
Performance Tests on I. C. Engines, Calculations of IP, BP, Thermal
efficiencies, SFC, FP, heat balance sheet for:
(a) Four stroke Diesel Engine.
(b) Four stroke petrol Engine.
(c) Multi cylinder Diesel/Petrol Engine, (Morse test)
(d) Two stroke Petrol Engine
(e) Variable Compression Ratio I. C. Engine. 21Hrs
Scheme of Examination:
One Question Part-A: 15 marks
One Question Part-B: 25 marks
Viva Voce: 10 marks
Total: 50 marks
Syl l abus of I I I & I V Semest er B. E. / Mechani cal Engg.
27
MACHINE SHOP
Subject Code : 12ME 408 Credits : 02
Hrs /Week : 3
1. Study of constructional features of following machines through
drawings/ Sketches:
a) Lathe
b) Radial drilling machine
d) Universal milling machine
e) Shaper and planer
g) Grinding machines (Surface, cylindrical)
2. Advanced exercises on Lathe where the students will work within
specified tolerances, cutting of V- threads and square threads
(internal as well as external).
3. Production of machined surfaces on shaper and planner.
4. Exercises on milling machines; generation of plane surfaces,
production of spur gears and helical involute gears, use of end mill
cutters.
5. Grinding of single point cutting tool, cutter and drills.
6. Study of recommended cutting speeds for different tool- work
material combinations.
7. Identification of different cutting tool and work materials.
A student shall make models of 5 to 6 components (Composite J ob),
(excluding standard and commercial components). J ob shall involve
operations like Turning, Boring, Drilling, Taping, Threading, Milling,
Shaping, Taper turning etc. and also a welding exercise.