The document discusses several types of refractory ceramic fiber blankets made by Thermal Ceramics for high-temperature insulation applications. It provides information on the materials, maximum continuous use temperatures, and typical properties of blankets including Kaowool, Cerachem, Cerachrome, and Cerablanket. The blankets have good mechanical strength and insulating properties up to temperatures between 1000-1500°C depending on the type.
The document discusses several types of refractory ceramic fiber blankets made by Thermal Ceramics for high-temperature insulation applications. It provides information on the materials, maximum continuous use temperatures, and typical properties of blankets including Kaowool, Cerachem, Cerachrome, and Cerablanket. The blankets have good mechanical strength and insulating properties up to temperatures between 1000-1500°C depending on the type.
The document discusses several types of refractory ceramic fiber blankets made by Thermal Ceramics for high-temperature insulation applications. It provides information on the materials, maximum continuous use temperatures, and typical properties of blankets including Kaowool, Cerachem, Cerachrome, and Cerablanket. The blankets have good mechanical strength and insulating properties up to temperatures between 1000-1500°C depending on the type.
fied at 1400 , the product has good mechanical strength before and after firing and good insulating property. Varieties of different densities and thicknesses are available. Kaowool HT Blanket Cerachem Blanket Cerachem blanket, a 1430 C classification temperature rated refractory blanket is formed from a unique, pat- ented, spun alumina-silica-zirconia fibre. It is specially designed for applications where high fibre tensile str- ength, low thermal conductivity and low shrinkage are required. Cerachem blanket is used extensively in high temperature units in the ceramic, chemical processing, and ferrous metal industries. Cerachem blankets are ideal for a wide range of hot face lining and backup insulation applications in furnaces, kilns and other high temperature equipment. Made from spun alumina-silica-chrome fibre, Cerach- rome blanket is well suited for hot face lining applications where higher temperatures are encountered, such as so- aking pit covers, reheat and forging furnaces. Cerachrome blanket with its chromia-stabilized chemistry offers improved long term shrinkage characteristics over zirconia containing blankets such as Cerachem. Cerach- rome blanket effectively fills the gap between zirconia bla- nkets and high alumina products. Cerachrome Blanket DESCRIPTION Blanket Thermal Ceramics Blanket products are air laid into a continuous mat and mechanically needled for added strength and surface integrity. Blanket products do not contain organic binders. Thermal Ceramics Blankets provided excellent resistance to chemical attack. Exceptions include hydrofluoric acid, phospho- ric acid, and strong alkalies (ie. Na O, K O). Thermal Ceramic Bl- anket are unaffected by oil or water. Thermal and physical properties are restored after drying. Kaowool S Blanket TYPE CLASSIFICATION TEMPERATURE Product Information : 1260 2 2 Kaowool B Blanket : 1000 Kaowool U Blanket : 1260 Needled blanket is made of fused Kaolin spun refractory ceramic fiber. Classified at 1000 , the product has good mechanical strength before and after firing and good insulating property. Varieties of different densities and thicknesses are available. Kaowool B Blanket Needled blanket is made of fused high purity Kaolin spun refrac- tory ceramic fiber. Classified at 1260 , the product has good mechanical strength before and after firing and good insulating property. Varieties of different densitie and thicknesses are available. Kaowool S Blanket Cerachrome Blanket : 1500 Cerachem Blanket : 1430 Refractory Fibre Blankets Kaowool HT Blanket : 1400 Cerablanket : 1260 Kaowool U Blanket Needled blanket is made of fused high purity Kaolin spun refrac- tory ceramic fiber. Classified at 1260 , the product has good mechanical strength before and after firing and good insulating property. Varieties of different densitie and thicknesses are available. Thermal Ceramics The maximum continuous use temperature depends on the application. In case of doubt, refer to your local Thermal Ceramics office for advice. MAXIMUM CONTINUOUS USE TEMPERATURE Cerablanket is produced using the spinning process. The resultant quality spun fibres have been optimized for high handling strength, with on average the highest tensile strength of any Thermal Ceramics ceramic fibre blanket. Cerablanket TYPICAL APPLICATIONS Furnace and kiln linings Boiler insulations Heat treatment temperature control Glass furnace crown insulation Furnace door seals Duct linings Pipe insulations Thermal barriers for automotive industry Die cut shapes for domestic appliances Insulation for field stress relieving of welds High temperature filter media Nuclear insulation applications Steam and gas turbines insulation HRSG Duct Fire Prevention www.morgantcchina.com.cn 6415%9615%12815%16015% Other thickness, width and length are available upon request.
The values given herein are typical values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Therefore, the data contained herein should not be used for specification purposes. Check with your Thermal Ceramics office to obtain current information. Blanket Product Information Width(mm) Density kg /m 3 Classification Temperature Properties Measured at Ambient Conditions ( 23 /50% RH ) High Temperature Performance % Chemical Composition 96 kg/m 3 Density 128 kg/m 3 Density MAIN PROPERTIES Permanent linear shrinkage % ( 24 hours ) Thermal conductivity, W/m.K, ASTM C 201, at mean temperature of : 200 400 600 800 1000 3 1000 600 400 200 800 TEL:010-58930372 FAX:010-58930373 Northern China ( Beijing ) Eastern China ( Shanghai ) Southern China ( Guangzhou ) Central & Western China ( Chengdu ) China Reginal Sales Offices TEL:021-68122500 FAX:021-58123529 TEL:020-87575530 FAX:020-87575531 TEL:028-86626982 FAX:028-86625682 Http://www.morgantcchina.com.cn China Marketing Communication Office 18 Kangan Road, Kangqiao Ind. Zone, Pudong,Shanghai 201315, China. TEL021-68122200 FAX021-58123529 E-mail:[email protected] Marketing Communication Offices Thermal Ceramics Americas T: +1(706)7964200 F:+1(706)7964398 Thermal Ceramics Asia Pacific T:+65 62731351 F:+65 62730165 Thermal Ceramics Europe T:+44(151)3344030 F:+44(151)3341684 TEL:021-68122500 FAX:021-58123529 Shanghai ( Refractory Ceramic Fibre ) Yixing ( IFB ) Jingmen ( Refractory Fibre,VF,Superwool ) TEL:0510-87434988 FAX:0510-87434881 TEL:0724-2309260 FAX:0724-2309718 Dalian ( Castables ) TEL:0411-86651508 FAX:0411-86665478 China Manufacturing Plants Al 2 O 3 +SiO 2 + ZrO 2 (Cr 2 O 3 ) Kaowool B - 0.15 0.09 0.05 0.23 Kaowool S 0.30 0.15 0.09 0.05 0.23 Cerachrome 0.30 0.15 0.09 0.05 0.23 0.30 0.15 0.09 0.05 0.23 Kaowool U Cerachem 0.30 0.15 0.09 0.05 0.23 Cerablanket 0.30 0.15 0.09 0.05 0.23 Kaowool HT 0.30 0.15 0.09 0.05 0.23 3600 7200 7200 7500 14640 610(1220)
610(1220) 610(1220) 610(1220) 610 50 6 25 20 13 Length(mm) Thickness(mm) Beijing ( High-temperature Ceramic Textile ) TEL:010-69742480 FAX:010-69742819 Availability and Packaging (Blankets are packed in carton / optional packing in plastic bag)