EC Notes
EC Notes
EC Notes
Text Microelectronic Circuit Design / Jaeger & Blalock, 4th Edition, McGraw Hill, 2011. ISBN 978-0-07-338045-2
Course description: The electronic devices, junction diodes, bipolar transistors and field-effect transistors, are introduced and studied
based on semiconductor physics models. The study then continues with analysis and design of main digital electronic circuits (NMOS
and CMOS inverters and logic gates, MOS memory and storage circuits) and with introduction to analog electronic circuits such as
simple one transistor amplifiers.
Prerequisite: ECE 231, Corequisite ECE 232 Required course.
Topic
1
2
2
3
Outcome
5
6
4
4
Analyze (find voltages and currents and sketch their time graphs) and design different types of rectifier circuits.
Demonstrate the knowledge of MOSFET (JFET) region models and their IV-characteristics. Draw the IV1
characteristics of a MOSFET from its parameters and find parameters using the IV-characteristics.
Analyze (calculate voltages and currents) a simple MOSFET (JFET) bias circuit and find its Q-point.
Design a simple MOSFET (JFET) bias circuit for a given specification.
7
8
5
5
10
Formulate the concept of ideal operational amplifier; identify its major properties and main types of op-amps circuits.
11
12
13
Analyze the simple circuits that include op-amps (find voltages and currents using op-amps properties and circuit
1
laws) .
Analyze one transistor (MOSFET, BJIT) amplifier circuit (draw DC, AC, small signal model equivalent circuits, find
their parameters and parameters of amplifier).
Identify the different types of NMOS logic inverter gates and list their major benefits and deficiencies.
14
Analyze (find logic voltage levels and currents) and design 5 types of NMOS inverter gates
15
16
17
18
19
Determine the logic function of an arbitrary complex NMOS logic gate and design it for a given logic function and
specifications.
Draw a CMOS inverter gate voltage transfer characteristic from IV-characteristics of a NMOST and PMOST. Identify
and explain its regions.
Determine the logic function of an arbitrary complex CMOS logic gate and design it for a given logic function and
time response specifications..
Draw the schematic of a static (6T) and dynamic (1T) memory cell and explain in details the process of reading and
writing a bit of information in it.
Draw the schematic of a typical sense amplifier and explain how it works
20
Draw a schematic of a simple (2-3 bit) NOR/NAND NMOS address decoder and explain how it decodes a given
address.
1
Course Topics
Week
Topic
Topic details
Text section
1. Introduction
1,2
2. Semiconductors
2,3
3. Diodes
1.1. 1.2
1.5
1.8
2.1, 2.2
2.3
2.5-2.7. 2.8-2.9
3.1
3.2-3.4
3.6
3.10, 3.11
3.12,3.13-3.16
4,5,6
4. MOSFET
6,7
5. BJT
8,9
6. Intro to OpAmps
(Ampl. as a system)
Single transistor
amplifier
(Ampl. as a circuit)
7. Intro to digital
circuits
Test 1
4.1-4.2.0
4.2.1-4.2.8. 4.3
4.9-4.10
4.11
5.1, 5.2, 5.3
5.5. 5.4-5.7
5.11
Test 2
10,11
12
10.2, 10.3
10.5, 10.7. 10.8,10.9
13.1, 13.2. 13.3
13.4,13.5. 13.6, 13.7
13.8, 13.9. 13.10, 13.11
6.1, 6.2, 6.4
6.5. 6.6, 6.7
6.8.1, 6.8.2. 6.9
6.10. 6.11.1,2,3
Test 3
12,13
8. CMOS circuit
design
13,14
9. MOS memory
15
7.1, 7.2
7.3.1, 2, 3. 7.4
7.5. 7.6, 7.7
8.2
8.3.1, 8.3.2. 8.4.1, 8.4.2
8.1.1,2; 8.5.1,2
8.6. 8.7
FINAL EXAM
Homework Policy
The list of the assignment is on the course website and in Moodle. A significant number of homework problems will be
assigned for each topic. The homework will not be graded (solutions will be posted on the web); instead, short quizzes
(10p.each) will be conducted every week. 5 best results will be counted toward your quiz grade of 50.
Circuits simulation
Circuit simulation is very important part of the project. There will be five graded simulation assignments during the
course. A Multisim simulation project will be offered as an extra credit of up to 30p.
Grading Policy
The course grade will be based on tests, quizzes and simulation assignments:
3 Tests @100 points
300
Short Quizzes
50
Simulation assignments
50
Final examination
100
(Honors project for honors students 100)
Total
500 (600)
Tests and final exam are closed books and notes. A list of formulas will be provided by instructor.
NJIT Honor Code
NJIT Honor Code will be strongly upheld. Violation will be brought to the immediate attention of the Dean of Students.