Scribd Logo
Upload

Welcome to Scribd!

  • Centralizing Patient Monitoring System in Real Time: Engr. Junaid Rabbai Assistant Professor

    Uploaded by

    M Kamal Ahmad
    28 views5 pages
    This proposal outlines a centralized patient monitoring system (CPMS) that would allow for real-time monitoring of patients' vital signs from different locations. The system would use sensors to monitor patients' temperature, heart rate, and other parameters, transmitting the data wirelessly to a central monitoring point where the values would be displayed. An alarm would alert staff if any parameters exceed normal levels. The proposal describes the hardware and software requirements, block diagram of transmitter and receiver components, and methodology for collecting sensor data, transmitting it wirelessly, and displaying it along with alarm functions. The goal is to develop a mobile monitoring system that provides independent location monitoring and alerts doctors if patients need attention.

    Original Description:

    Original Title

    (333494315) fyp0701_1_.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This proposal outlines a centralized patient monitoring system (CPMS) that would allow for real-time monitoring of patients' vital signs from different locations. The system would use sensors to monitor patients' temperature, heart rate, and other parameters, transmitting the data wirelessly to a central monitoring point where the values would be displayed. An alarm would alert staff if any parameters exceed normal levels. The proposal describes the hardware and software requirements, block diagram of transmitter and receiver components, and methodology for collecting sensor data, transmitting it wirelessly, and displaying it along with alarm functions. The goal is to develop a mobile monitoring system that provides independent location monitoring and alerts doctors if patients need attention.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as docx, pdf, or txt
    28 views5 pages

    Centralizing Patient Monitoring System in Real Time: Engr. Junaid Rabbai Assistant Professor

    Uploaded by

    M Kamal Ahmad
    This proposal outlines a centralized patient monitoring system (CPMS) that would allow for real-time monitoring of patients' vital signs from different locations. The system would use sensors to monitor patients' temperature, heart rate, and other parameters, transmitting the data wirelessly to a central monitoring point where the values would be displayed. An alarm would alert staff if any parameters exceed normal levels. The proposal describes the hardware and software requirements, block diagram of transmitter and receiver components, and methodology for collecting sensor data, transmitting it wirelessly, and displaying it along with alarm functions. The goal is to develop a mobile monitoring system that provides independent location monitoring and alerts doctors if patients need attention.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as docx, pdf, or txt
    of 5

    Final Year Project-1

    Short Proposal

    Centralizing Patient Monitoring System in Real Time


    (CPMS)

    Batch 2011

    M Kamal Ahmad

    11-2404

    Fahad Anis

    11-2149

    Razi Ahmed

    11-2149

    Muhammad Raza

    11-2440

    Internal Advisor:
    Engr. Junaid Rabbai
    Assistant professor

    Department of Electrical Engineering


    National University of Computer and Emerging Sciences-FAST
    Karachi Campus

    FYP Proposal: Centralizing Patient Monitoring System in Real Time

    1. Project Objective:

    To make a centralized system for patient monitoring.

    To design a GUI (graphical user interface) to show the values of basic

    parameters(temperature,heart beat etc.)


    Wireless transmission of parametric values of the patient.

    To make a real time practical system

    To get data from different patients of different locations and have a


    record at centrl monitoring point.

    To give an alarmic situation when certain parametres i.e sugar level


    goes far beyond to normal value.

    2. Project Requirements:
    Hardware:
    Sensors
    Wireless Transfer MODULE
    Wireless Receiver module
    Microcontroller/arduino
    Serial Port,
    Alarm
    Power Supply,

    Software:
    Keil
    proteous
    labview
    Matlab
    Diptrace
    java
    C sharp

    FYP Proposal: Centralizing Patient Monitoring System in Real Time

    3. Block Diagram:

    Transmitter Side:
    Antenna
    Sensor

    Sensor

    Data
    Acquisition
    Block

    Microcontroller

    Transmitter

    N Sensor

    Receiver Side:
    Antenna

    Receiver

    Microcontroller

    GUI

    Alarm for
    Emergency

    FYP Proposal: Centralizing Patient Monitoring System in Real Time

    4. Project
    Methodology:
    All Temperature. blood pressure and different sensors values will be our input to
    microcontroller. All get digitized there then transmitted through transmitter and will be
    received by the receiver at center monitoring room. This all will be done through wireless
    technology. The output of the patient condition will be displaced on personal computer and
    it will have alarming option which will be utilized in any kind of abnormalities in required
    value of sensors. Already existing monitoring system actually motivate us to innovate such
    a system that has a advantage of mobility of patients due to use of portable monitoring
    devices, other advantage that this system has is the independent location that has a
    monitoring facility. Lot of researching on this system has been done in foreign countries.
    This system hasnt been implemented in Pakistan in this way

    5. Project Description:
    A CPMS(centralized patient monitoring system)is capable of analyzing the patients health
    continuously; it can measure the essential parameters of the patients such as heart beat,
    blood pressure, temperature, and etc. Each parameter has its own device attached to an ICU
    patient all synchronized, and monitors the patient continuously. Measured parameters of
    the patient are interfaced with the system at the patient end which is connected with the
    server and . The server stores the patients data and the status of the patient will be judge in
    patient end system. If the status will be normal it will be transmitted to the server and will
    be saved in the database. If the status is abnormal then relevant person is informed through
    alarm.

    6. Conclusion / Results:

    FYP Proposal: Centralizing Patient Monitoring System in Real Time

    All the parametric values of the patient will be displaced on the center monitoring
    point through wireless means

    In case of abnormality in patients condition relevant patient will point out directly
    through alarm and by center monitoring room relevant doctor can be called out .

    7. Project Budget / Cost:


    Project cost will be approximately 40 thousand

    8. References:

    http://www.engineersgarage.com

    www.developershome.com,
    www.archilocus.netfirms.com,
    www.amondcctv.com,
    www.adt.com.pk,
    www.8051projects.net
    Book: PIC Microcontroller and Embedded Systems by Muhammed Ali Mazidi
    www.networkcamerareviews.com

    You might also like