Professional Documents
Culture Documents
Connecting To Busecure With Windows 7 Screenshot Version
Connecting To Busecure With Windows 7 Screenshot Version
screenshot version
Connecting to busecure (WPA2/WPA2 Enterprise) with Windows 7
Instructions
From the Start menu, open the Control Panel and select Network and Sharing Center.
1. On the left, click Manage wireless networks and then click Add.
2. Choose Manually create a network profile.
3. In the dialog box that appears:
Click Next
Leave "Remember my credentials for this connection each time I'm logged on" unchecked if you are
configuring a shared laptop.
Click Settings.
In the Trusted Root Certification Authorities list, place a check in the box for Entrust.net Certification
Authority (2048) and any other Entrust Certificate Authority entries.
Verify that Secured password (EAP-MSCHAP v2) is selected for the authentication method and then
click Configure.
If wireless connections are managed by a program other than Windows you may encounter a
Windows error at this juncture. Disconnect from the current wireless network in order to finish the
configuration.
Verify that Automatically use my Windows logon name and password is not checked. Click OK.
5. Click OK on all the remaining windows. Your system will attempt to connect to busecure. You
should see a notification balloon near the system tray displaying the message "Additional information
is required to connect to busecure".
6. Click the message balloon and then enter your Binghamton University Computer Account (PODS)
user id and password in the authentication box. Leave the Domain field BLANK and then click OK.
7. If you experience a delay in connecting to busecure restart the machine.
Last updated on Aug 24, 2012.