Castell - PEZA
Castell - PEZA
I. INTRODUCTION
International trade has always been essential in the growth of the economy especially under
globalization. Factors such as technical knowledge, skills of a countrys labor force, capital (either
domestic or foreign) and machineries (through transfer of technology), are all indispensable for
economic growth. Likewise, exports play a vital role in economic growth. The Philippine
government, which makes industrial policies, has assigned trade-related management and operation
of activities to the Department of Trade and Industry (DTI), which concentrates on the following
target clients: investors, exporters, small and medium scale enterprises, businessmen in general and
consumers. The primary goal of this said agency is to increase investment in the country, thus,
increasing aggregate output, or the gross national product (GNP) or gross domestic Product
(GDP).
Export products made in the country are made available to the international markets
through trade fairs and trade missions, held at the Philippine World Trade Center. The government
agency that organizes such activities is the Center of International Trade Expositions and Missions
(CITEM), which is under the DTIs Exporters Assistance Group. This government agency
addresses the needs and problems of the export sector and is also involved in the product
development and promotion of Philippine-made goods not only domestically but also
internationally.
DTI not only focuses on exporters but also investors in the countryside. Up to date, the
country has been liberalizing almost all sectors in the economy to encourage foreign investments.
Areas such as telecommunications, shipping, oil, banking and insurance has also been deregulated.
Moreover, the government has also allowed 100% foreign ownership of enterprise. The Philippines
having the General System of Payment (GSP) advantage, has a competitive edge over its
neighboring countries. And thus enjoys tariff preferences in exporting to other countries.
The Department of Trade and Industry has also an Investors Assistance Group that
encourages foreign direct investment and transfer of technology particularly in the countryside. The
Philippine Economic Zone Authority (PEZA) is under this group. Due to the failure of the Export
Processing Economic Zone Authority (EPZA) in 1986, this government agency is incorporated in
response to the industrial policy in promoting exports. This agencys task is to encourage foreign
direct investments through environment friendly economic zones located in the different parts of
the country. Without a doubt, the Philippines is one of the best investment sites with the best
investment climate especially to the foreign investors, in the Asia Pacific Region. Given its high
quality education, health and care services as well as recreational facilities, the Philippines has been
more competitive in the international market. Indeed, these two government supported agencies
attached to the Department of Trade and Industry, have been very critical in the successful
adjustments of many firms and industries in the country, not only the small and medium scale
enterprises but also the foreign enterprises as well.
In industrializing countries such as the Philippines, it is important to take into consideration
government interventions because these affect industrial policies. Moreover, with inappropriate
industrial and economic policies as well as political instability would largely affect the industrializing
process. The appropriate role of government in economic development has always been a debate in
many countries. It is evident that in the East Asian experience, particularly in China, Hong Kong
and Taiwan, government played a very important role in their economic development. Similarly, in
the Philippines, the governments industrial policies are marked by its supporting agencies, such as
the Department of Trade and Industry (DTI), which promotes export products and commodities
and the Development Bank of the Philippines (DBP), which provides credit to small and mediumscale enterprises and logistic investments.
Government plays an important role in fostering economic development thru industrial
adjustments. In the Philippines, government is cautioned to concentrate on the provision of the
right environment for the growth of the industrial sector namely (a) good governance, where
public policy does not become the cause of market failure; (b) provision of adequate and
competitively-priced infrastructure; and (c) creation and/or maintenance of an environment
conducive to real competition (Tecson, 2001 and Rodrik, 1995)
A. Economic Development and Loans
Schumpeter (1911) describes economic development as resulting from spontaneous and
discontinuous changes in factor combinations, brought about by the entrepreneurs, that would
alter an otherwise, steady and identical circular flow of production and exchange, whereby the same
products would be produced every year in the same way and each supply would be matched by an
equal demand (vice versa).
Schumpeter thought of money creation via credit as the fundamental function through
which banks enabled the entrepreneurs to adopt new factor combinations. He believed that banks
play a pivotal role in economic development because they choose which firms get to use societys
savings. According to this view, the banking sector alters the path of economic progress by
affecting the allocation of savings and not necessarily the savings rate. Thus, Schumpeterian view of
finance and development highlights the impact on banks and productivity growth and technological
change.
Loans encourage private sector participation in infrastructure. Banks approve loans for
financial institutions for re-lending to private projects. A banks private sector investment facility
will be utilized by the participating financial institutions to purchase long-term debt securities, such
as debentures, to be issued by infrastructure projects, which can be traded in the market. Together
with ongoing capital market reforms, this is expected to encourage development of a long-term
debt market, crucially needed to sustain large-scale infrastructure financing for developing
countries. The facility (private sector investment facility) would encourage greater private sector
investment and help develop new sources of funds for infrastructure financing.
ii)
iii)
iv)
v)
Potential Market Access centered on unrestricted local laws and regulations. The
regulatory environment must allow Multinational Corporations (MNCs) to compete
on equal footing against local companies (foreign firms are often monitored more
closely than their local counterparts).
Government Support (regulations) an attractive regulatory climate is an important
consideration in the investment-side decision. It is important to note that some
degree of government regulation is essential in protecting the interests of producers
and consumers, thereby ensuring smooth functioning of the marketplace. Too
much regulation however can create distortions that raise cost thereby reducing
firms to function less efficiently.
Financial Incentives excessive tax burdens on investments and profits will
discourage firms from investing in a prospective host country. The tax burden
involves not only tax rates, but also the tax treatment of dividends, royalties,
remittances, and other transactions between local subsidiaries and their parent
companies. The type and size of incentives offered by a country depend on the
market orientation it faces from other countries in attracting the type of investment.
Infrastructure/Support Services a host countrys physical resources: roads, ports,
airports, telecom networks and facilities, availability and cost of energy all have a
great impact upon the cost and efficiency of production and transportation.
Country with poor infrastructure may have difficulties capturing a significant
amount of FDI.
Quality of Labor Force labor-intensive firms (e.g. textile, apparel) firms seek to
establish plants in developing countries to take advantage of their lower wage rates.
It is important that apart from pay scales, investors also look at the quality of
education in the host country, because better-educated workers will be easier to
train and will reach their optimum output sooner than those who are not as well
educated.
II. ROLE OF THE GOVERNMENT IN ECONOMIC DEVELOPMENT
Government plays an important role in fostering economic development thru industrial
adjustments. In the Philippines, government is cautioned to concentrate on the provision of the
right environment for the growth of the industrial sector namely (a) good governance, where
public policy does not become the cause of market failure; (b) provision of adequate and
competitively-priced infrastructure; and (c) creation and/or maintenance of an environment
conducive to real competition (Tecson, 2001 and Rodrik, 1995)
Adelman (1999) classifies the three phases of optimal role of government in development as
(i) Prime Mover Phase; (ii) Problem Phase and; (iii) Rehabilitating Phase.
A. Prime Mover Phase
The Prime Mover Phase (1940-1979) was the time when government was assigned a
primary entrepreneurial role wherein they view economic growth as a growth process that requires
the systematic reallocation of factors of production from low-productivity, traditional technology,
decreasing returns, mostly primary sector to high-productivity, modern, increasing returns, mostly
industrial sector. They assume that the resource reallocation process is hampered by rigidities,
which are both technological and institutional in nature. Investment lumpiness, inadequate
infrastructure, imperfect foresight, and missing markets impede smooth resource transfers among
sectors in response to individual profit maximization and provide the bases for classical, structuralist
approaches to economic development. Technological externalities in infrastructure and basic
industrial projects would lead to coordination failures that would cause private agents to under
invest in them.
The suggested solution to the structural and coordination failures is that government
should have to engage in an active role to subsidize investment, coordinate investment activities,
and undertake direct investment from government budget even though it would lead to mild
inflation. Development economists argue that such action would maximize the external economies
generated by investment and generate self-sustained, growth faster. Others sectors argue that
balanced growth would reduce bottlenecks and import needs of the investment programs and
thereby raise the marginal efficiency of investment.
Classical economists contend that government would have to continue to perform the
entrepreneurial job in the absence of private entrepreneurship. Government can artificially increase
the rates of return from private investment through direct government subsidies; by engaging in
joint government-private ventures; and subsidizing management-training programs.
B. Problem Phase
The Problem Phase (1879-1996) was the time when Neo-classical trade theorists said that
international trade could provide a substitute for low domestic aggregate demand. They argued
that in order for government to remove barriers to international trade, government must position
the economy on an autonomous, sustained growth path. Governments should also remove price
distortions in domestic factor and commodity markets to induce suitable movement of factors
among sectors, encourage the adoption of appropriate technology, and increase capital
accumulation. It is said that domestic and international liberalization programs would suffice to
bring about sustained economic growth and structural change.
However, government interventions are not needed, as trade liberalization can induce
development, provide economies of scale and make industries internationally more competitive. It
was argued that greater domestic marketization of goods and services, including public goods,
would make development more cost-effective and efficient. Governments on the other hand are
perceived as bloated and corrupt; they accept bribes for economic privileges generated by
government interventions into the market; and they operate by distorting market-incentives in
mostly unproductive and wasteful ways. Government interventions into the market such as
regulation, tariffs, subsidies, and quotas, would increase rent-seeking activities by private
entrepreneurs, which absorb large fractions of GNP and leads to significant economic inefficiencies.
As a result, reducing the role of the government in the economy would lead to more rapid and
more efficient development in the economy.
They stressed that the best action that government can do to promote development is to
minimize their economic roles. Liberalizing domestic and international markets both factors and a
product is the recommendation of choice. Acts to promote the spread of markets and the rule of
market incentives would improve the efficiency of the economy. Such acts would be taken as an
indication of economic virtue, worthy of financial support by international agencies.
C. Rehabilitating Phase
Economists and policy-makers came to realize that, the growth performance of most
developing countries in East Asian and some South Asian countries, in which governments
continued to play an active role had been remarkably good. Despite the unfavorable international
environment, Asian countries exported their way out of crisis by shifting import-substitution to
export-promotion regimes; devaluated their currency to promote expenditure switching among
imports and domestic goods; undertook a set of market-friendly institutional and policy reforms;
continued to invest in infrastructure and human capital; and engaged in the direct and indirect
promotion of selective industrial policy. These set of policies were said to have helped countries
achieve economic growth.
III. ROLE OF THE GOVERNMENT IN ECONOMIC DEVELOPMENT PHILIPPINE
CASE (INTERMEDIATE GROUP)
Adelman (1999) classifies the Philippines in the Intermediate Group, a group that considers
the economy as intermediate in socio-political and economic degrees of institutional development,
the process of social, economic and political modernization had proceeded far enough to greatly
disturb traditional customs and institutions without progressing far enough to set them on the path
of self-sustaining economic development. The Asian countries listed with the Philippines include
Sri-Lanka, India, Pakistan, Myanmar, Thailand and Indonesia. They are characterized by rapid and
unbalanced social transformations, which led to high degrees of social tensions and political
instability.
Adelman (1999) suggests that government should concentrate on providing the
institutional and physical conditions and the policy environment necessary to promote the initial
stages of industrialization. Particularly, it was stressed that that government should invest in
transport and power systems. In summary, the following areas should be taken into account by the
government under the intermediate group:
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
Raise the national investment rate, both direct investment and through
subsidizing and promoting private investment.
Advocate the development of modern industry
Foster an increase in the variety of consumer goods produced by power driven
factory methods, encourage the domestic processing of natural resource based
exports, and strive to increase the proportion of manufactured goods in total
exports.
Substitute for imported skills and capital by promoting domestic entrepreneurs
in manufacturing, and by investing in education.
Build up the domestic banking system and domestic credit institutions by
adopting policies that boost private savings, channel them to the private banking
system, and enhance the effectiveness of the banking system in performing
intermediation function between savings and investment.
To avoid relying too heavily on inflationary finance, the government should
build up its tax institutions by raising the ratio of government revenues to GNP
and by increasing reliance on direct, rather than indirect, trade-related taxes.
Create the conditions of transfer of resources from agriculture to industry by
raising the productivity of agriculture.
Make agriculture more responsive to economic incentives by expanding its
degree of commercialization while reducing the proportion of the population
engaged in subsistence agriculture.
Encourage a reduction of socio-economic dualism by decreasing pervasive
regional and sectoral cleavages in technology, types of economic organization
and styles of life between urban and rural inhabitants, large expatriate-managed
factories and domestically owned and managed ones, and between export and
domestic consumer production. It should accomplish this not only through its
investment patters in infrastructure and education but also through the
promotion of mass-communication media.
Adelman (1999) posits that for government to achieve long-term economic growth, it must
have substantial autonomy, capacity and credibility. A certain degree of autonomy is needed to
implement changes in policy regimes or engineer fundamental changes in economic institutions.
Increasing capacity means raising the training and professionalism of its civil service, the efficiency
of its public administration and reducing the level of corruption.
A. Factors to Consider and Efficient Resource Allocation of Government in Economic
Development
It is important to take into consider the three inputs available in an economy in order to
increase aggregate output as well as the efficient allocation of resources in the economy.
Capital as a function of production in economics may refer to financial capital, which is
money, or it may also be physical capital. In an industrializing economy, the government has to take
into account fixed investment, since this fixed investment is financed from both domestic and
foreign savings, as well as foreign direct and portfolio investments. Labor is another factor in the
production process. It is important to take note of labor because it is very much connected to the
employment generated in the country especially in the current situation, where there is a
continuous growth in the population. Human capital is identified as the skills and abilities of the
laborers or workers in the country as used in employment and their contribution to the economy.
ii)
iii)
industries. It is the responsibility of the state to ensure that its industrial polices
would be an efficient mean of allocating resources across industries.
Efficient allocation across enterprises. The government offers industrial projects
to specific enterprises in the industry to be undertaken by these enterprises in the
early stages of their development. Moreover, government intervention here
should guarantee that there would be a suitable competition among the
enterprises in the industry and avoid those inefficient enterprises, which could
damage the competitive setting in the industry.
Efficient allocations through government coordination. Government has to
guarantee the public that they are committed and are thereby responsible in its
agreements with its contracts to other parties.
This Act was replaced in 1955, through the negotiation of the United States-Philippine Trade Agreement, or more
commonly known as the Laurel-Langley Agreement. This treaty had abolished the authority of the United States to
control the exchange rate of the Philippine peso, made the parity privileges reciprocal for both countries, extended the
sugar quota, and extended the time period for the reduction of other quotas and for the progressive application of tariffs
on Philippine goods exported to the United States. Moreover, this agreement had also extended the parity privileges of
the Americans to all forms of economic activities in the country.
The Philippines had started to adopt an industrialization policy of import substitution in the
1950s in response to the balance of payments crisis in 1949. During this period, the Philippine
government had restricted the importation of luxury goods and imposed foreign exchange controls,
thus ushering in the ISI era. Although the said restrictions were imposed to control the outflow of
foreign exchange from the country, this program also paved the way for the countrys so-called
industrialization.
This import-substitution era of the 1950s to the early 1960s was nostalgically remembered
as the golden age of the Philippine manufacturing industry. During this period, the country was
considered as one of the leaders in Asia, being second only to Japan in terms of manufacturing
output and economic growth. According to Yu (2004), the manufacturing industry was averaging
14.05% growth for the 1946-1953 period, and 11.025% for 1953-1957. As a matter of fact, the
share of the manufacturing output had reached a point where it exceeded that of the agricultures
by 1960, which reflected the degree of industrial development achieved at that time.
However, although the exchange rate control and the ISI era had actually provided for the
development of the local manufacturing capability and had introduced new skills to the Filipinos, it
had not been successful in reducing the countrys appetite for imports.
Most industries that were put up in the country were manufacturers that filled up the
demand for consumer and luxury goods. However, inputs and machineries that were needed to
produce these goods were still imported. No efforts at establishing basic heavy industries were
made, except for steel integration, which up to now has not yet been achieved. So while the
proportion of consumer and luxury goods being imported fell from 40% in 1950 to 14% in 1960
[the] purchase of inputs and machineries from abroad rose to 80%. (Rosello, 1989)
By 1962, the Philippines faced another BOP crisis, forcing the country to turn to the
International Monetary Fund (IMF) for the first time for a $300 million loan. One of the
conditions imposed for the loan was the lifting of the import and foreign exchange controls. This
resulted in the country returning into its old ways of importing almost everything; thus the import
substituting strategy suffered a reversal, forcing most of the countrys manufacturers to close up or
sell out to foreign investors. Afterwards, the government had adopted an exports-oriented program
in place of the import-substitution strategy, which gave birth to the EOI strategy.
C.
10
Marcos also issued the Presidential Decree (PD) 66, in order to attract more foreign
investments into the country. This gave the following incentives to firms that will be exporting at
2
least 70 percent of their products:
i)
ii)
iii)
iv)
v)
vi)
vii)
With the founding of these export processing zones, the Philippines began its integration
into the transnational corporations network of global subcontracting. Moreover, the countrys
export profile had shifted from traditional exports, which are primarily unprocessed or slightly
processed agricultural and mineral products, to non-traditional manufactured exports, or goods that
had undergone some processing (See Tables 1 and 2).
Table 1: Top Philippine Exports, 1950-1980
(Volume in thousand kg)
Commodity
Copra
Sugar
Bananas
Logs and Lumber
Desiccated Coco.
Coco. Oil
Canned Pineapples
Golda
Abaca, unmanufactured
Copper Concentrates
1950
707,186
420,475
0
144,247
73,050
69,806
65,388
N/A
96,312
8,053
1960
804,371
1,089,845
138
1,515,416
58,775
59,965
44,839
N/A
101,152
227,931
1970
447,443
1,236,215
106,792
4,067,555
60,241
339,241
99,980
N/A
55,228
631,718
1980
761,147
972,217
0
2,055,477
66,245
614,387
116,393
N/A
210,694
799,311
In troy ounce
Source: Yu, (2004)
1980
671.00
500.00
e
1990
1,523.00
1,776.00
e
2000
22,880.14
2,562.62
576.28
369.56
567.00
77.00
e
361.00
189.00
e
463.94
592.84
431.52
Yu, Joseph S. EPZ and Industrialization. IBON Facts and Figures, 15 and 29 February 2004.
11
Bananas (Fresh)
Cathodes and Sections of Cathodes (of refined copper)
Petroleum Productsd
114.00
0
e
149.00
281.00
e
Ibid.
12
291.65
223.79
436.35
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
x)
Food Products
Home Furnishings
Electronics
Motor Vehicle Parts and Components
Wearables (Garments, etc.)
Marine Products
Giftware and Holiday Decor
Construction Materials
Organic or Natural Products
Information Technology (IT) Services
The Arroyo administration was also pushing the conversion of agricultural lands into agroindustrial estates in order to produce crops for export under the Agriculture and Fisheries
Modernization Act.
V. ASSESSMENT OF THE PHILIPPINE ECONOMIC ZONE AUTHORITY (PEZA)
A. Background
Export Processing Zones can be defined as limited geographical areas or groups of exportoriented manufacturing or service enterprises located in any part of the country, which had been
benefiting from special investment-promotion incentives, including exemptions from customs
duties and preferential treatment with respect to various fiscal and financial regulations. (ILO,
1998)
Apart from the term export processing zones, which was widely used, a variety of
terminologies such as industrial free zones, free trade zones, special economic zones, and
maquiladoras were used interchangeably through most of the literature (See Table 3).
Table 3: Terms Synonymous with Export Processing Zones (EPZs)
Examples of Countries Where Used
Costa Rica, Honduras, Ireland, Trinidad and Tobago,
Turkey, United Arab Emirates, Uruguay, Venezuela
Maquiladoras/Maquiladora
Costa Rica, El Salvador, Guatemala, Honduras,
(in-bond) Enterprises
Mexico, Panama
Special Economic Zones
China
Industrial Free Zones
Cameroon, Colombia, Ghana, Madagascar, Syrian
Arab Republic, and Jordan
Industrial Free Zones for Goods and Services
Colombia
Free Trade Zones
Bulgaria, Chile
Export Free Zones
Jamaica
Free Trade and Industrial Zones
Islamic Republic of Iran
Special Export Processing Zones
The Philippines
Export Processing Free Zones
Togo
Tax Free Factories
Fiji
Bonded Zone
Indonesia
Free Zones and Special Processing Zones
Peru
Free Economic Zones
Russian Federation
Term
Free Zones
13
Industrial Estates
Points Francs (Special Industrial Free Zones)
Thailand
Cameroon
Source: Legislation and Publications of Governments and EPZ authorities, as posted in the International Labor
Organization Website (www.ilo.org)
However, it should be noted that EPZs were distinct from terms such as free ports, and
free trade zones, which were normally associated with warehousing, transshipment, and other
commercial activities (Aggarwal, n.d.).
In actual practice, the types of zone activities actually varied from bonded warehouse, export
processing and assembling, border or port trade, and high-technology research and development
(R&D), to trade-related transportation or financial services. However, despite all these variations,
export-oriented manufacturing activities had been the main focus of most zones, where production
was typically dominated by foreign corporations.
Export Processing Zones started in 1958, when the Shannon Zone was set up in Ireland
and the first to bear EPZ nomenclature. Some of the early EPZs were founded in Puerto Rico
(1962), Mexico (1964), Kandla (1965), Taiwan (1966), South Korea (1971), Philippines and
Malaysia (1972). Over the last three decades, export processing zones had been very significant in
the industrial development in countries such as Taiwan, China, South Korea, Singapore, Hong
Kong, Malaysia, Dominican Republic, and Mauritius.
B. Goals of export processing zones
According to Madani (1999), there were four primary goals and characteristics for
establishing export-processing zones. These were:
i)
ii)
iii)
iv)
C. Incentives
In order to attract foreign corporations to invest in their respective export processing zones,
various policies incentives had been offered by the host countries. From the standpoint of the
foreign investors, these incentives could be translated into lower production costs in the zone, and
ceteris paribus, higher potential profits derived from the EPZ operation. In return the host
countries could expect to benefit from the goals stated in the previous discussion. Eventually, the
economies with export processing zones could be put onto an export-led growth path, thus leading
to a fuller integration into the world economy, and doing so in accordance with their comparative
advantages. According to Madani (1999), among the different types of export processing zones in
the world, the following were the typical incentives being offered:
14
i)
ii)
iii)
iv)
v)
vi)
Unlimited duty-free imports of raw, intermediate input and capital goods that
were necessary for the production of exports;
Less governmental red-tape, which included more flexibility with labor laws for
the firms in the zone than in the domestic market;
Generous and long-term tax holidays and concessions to the firms;
Above average (compared to the rest of the host country) communications
services and infrastructure. It was also common for countries to subsidize
utilities and rental rates;
Zone firms could be domestic, international or joint venture. In many cases
there was no limitation on foreign ownership of the firms or on the repatriation
of the profits. The role of FDI is prominent in EPZ activities;
Some countries allowed the sale of a certain percentage of total EPZ products to
the domestic market.
D. Framework
Since there were inadequate studies regarding the assessment of the performances of export
processing zones, Schwellnus (2003) had set several economic arguments regarding EPZs, which
could be used for such assessment. In addition, Dorsati Madanis (n.d.) work included foreign
exchange earnings potential and tax revenue or tax loss effect as possible gauge for evaluating the
impact of EPZs on a country.
E. Direct Employment Effects
Job creation was one of the primary goals of establishing export processing zones, and was
considered as the most important contribution of EPZs to the economy. Commodities produced
in export processing zones were usually labor-intensive, which would allow for more employment
for the country. Export processing zones might be generating a volume of manufacturing
employment that is very small relative to the aggregate national manufacturing employment,
however, this number might be large to urban/regional manufacturing employment (Schwellnus,
2003).
In many export processing zones in the world, the proportion of female employment was
high. According to Madani (n.d.), women, particularly belonging to the 16-25 year old bracket
and single were attractive prospective employees of EPZs due to three reasons:
i)
ii)
iii)
They do not stay on the job for a long time since most of them marry and leave
after a few years, and therefore did not ten to get involved with labor unions;
Plant managers preferred to hire women because they are more diligent and
dexterous; and
Women were usually paid lower wages than their male co-workers.
15
indirect employment could be done through the demand for physical infrastructure and supporting
services. Since both the construction industry and the provision for supporting services such as
janitorial services, were intensive in the use of unskilled labor, these indirect employment effects
could be expected to benefit the poor (Schwellnus, 2003).
G. Skill Formation
According to Schwellnus (2003), skill formation for unskilled workers could occur through
on the job trainings, learning-by-doing, and the learning of industrial work discipline. Rather than
enabling them to perform complex tasks specific to a particular manufacturing sector, working in an
EPZ for a prolonged period of time enables the poor unskilled workers to perform simple and nonspecific manufacturing tasks (Schwellnus, 2003). Thus, this could increase the poor unskilled
workers welfare by increasing the range of job opportunities available to them.
H. Environmental Conditions
According to Schwellnus (2003), the environmental impact brought by firms from export
processing zones could affect the welfare of the poor through two channels. First, pollution affects
traditional income sources of the poor, such as fishery and agriculture. Second, the poors quality
of life could be affected due to the air and water pollution produced in the export processing zones.
I. Foreign Exchange Earnings Potential
Export processing zone were able to bring foreign exchange in two ways: through the sale
of exports, and through the investments of the foreign enterprises. Foreign exchange earnings were
said to be one of the main benefits of export processing zones into the destination countries. This
was due to the fact that export processing zones were to provide foreign exchange earnings that
allow low income economies to slacken the foreign exchange constraints regarding their import
needs for the rest of the economy, and to provide the government with development funds
(Madani, n.d.).
J. Tax Revenue or Tax Loss Effects
As mentioned from chapter two, governments were attracting foreign investors into their
respective export processing zones through generous tax incentives, such as tax holidays, and tariff
exemptions.
According to Madani (n.d.), some economists had argued that taxes from employment and
foreign exchange earnings could offset the said incentives. However, the tax loss experienced by
the government through export processing zones was not limited to tax incentives. It also included
government investments such as transportation infrastructures, utilities and telecommunications
facilities, and administrative support, which were essential in running the zones.
K. Republic Act 7916
PEZA was created by Republic Act 7916 (Special Economic Zone Act of 1995) to
accelerate the creation of employment opportunities particularly in the countryside, and to spur the
growth and diversification of exports, by attracting foreign investors to either develop or put up
16
ii)
The State recognizes the indispensable role of the private sector, encourages
private enterprise, and provides incentives to needed investments. (Section 20,
Article II)
The State shall promote the preferential use of Filipino labor, domestic
materials, and locally produced goods and adopt measures that help make them
competitive. (Section 12, Article XII)
With this, the government, through PEZA, would be able to actively encourage, promote,
induce, and accelerate a sound and balanced industrial, economic, and social development of the
country in order to provide jobs to the people especially those in the rural areas, to increase their
productivity and their individual family income, and thereby improving the level and quality of their
living condition through the establishment, among others, of special economic zones in suitable
and strategic locations in the country and through measures that shall effectively attract legitimate
and productive foreign investments.
The goal of PEZA as a government-owned corporation is to be able to help the government
achieve the target of creating six to ten million jobs for the Filipinos in the next 6 years (until
2010). In response to this, PEZA attracts foreign investments particularly export manufacturing and
IT services to come to the country. In fact, PEZA encourages growth and diversification of exports
by developing world class and environment friendly economic zones. As of January 2004, PEZA
had a total of 1042 firms located in the 96 economic zones in the country (See Tables 4 and 5).
Out of the 1042 firms operating in the country, 430 belong to the public economic zones, 504
from private economic zones and the remaining 108 from information technology parks and
buildings. In addition these export producing and IT service companies supported by PEZA are
given their respective incentives.
As an important national development strategy, the government promotes the establishment
of world-class, environment-friendly economic zones all over the country to respond to demands
for ready-to-occupy locations for foreign investments.
Table 4: List of PEZA Firms, as of July 2004
Economic Zones
A. Public Economic Zones
Baguio City Economic Zone
Bataan Economic Zone
Cavite Economic Zone
Mactan Economic Zone
Total
Operating Firms
12
61
286
107
466
1
6
19
17
22
36
3
3
4
1
2
63
15
19
2
1
23
71
1
37
19
11
4
1
41
2
2
14
2
1
2
1
1
3
18
5
4
460
3
9
22
1
1
1
8
6
1
13
2
1
5
3
Source: www.peza.gov.ph
18
76
Table 5: PEZA List of Operating / Proclaimed Special Economic Zones, as of May 2004
No.
Name of Ecozone
Operating
1
Amkor Technology Special
Economic Zone
4
5
6
Calamba Premiere
International Park
10
11
12
Cocochem Agro-Industrial
Park
Daiichi Industrial Park
13
14
EMI-Special Economic
Zone
E-Square Information
Technology Parkc
15
16
17
Location
Km. 22, East Service Rd.,
South Super Highway,
Brgy. Cupang, Muntinlupa
City
Calibutbut, Bacolor,
Pampanga
Lahug and Apas, Cebu
City
Loakan Road, Baguio City
Total Area
(in hectares)
14.08
32.00
23.70
Carmelray Industrial
Corporation
Carmelray-JTCI Corporation
50.75
278.51
24.37
ABS-CBN Broadcasting
Corporation
1.0
0.37
Developer/Operator
19
116.25
1,733.37
65.63
143.03
9.87
62.49
42.00
55.02
13.29
12.20
18
25
26
27
28
19
20
21
22
23
24
51.07
59.78
27.81
15.94
Philippine Securities
Corporation
0.30
25.25
50.63
National Development
Corporation
Science Park of the Phils. Inc.
424.70
66.71
109.15
171.02
29.40
22.69
57.26
72.99
62.08
89.14
24.00
82.25
50.01
31
32
33
34
Laguna Technopark IV
35
Leyte Industrial
Development Estate
Light Industry & Science
Park I
Light Industry & Science
Park II
Lima Technology Center
(Malvar)
Lima Technology Center
(Lipa)
30
36
37
38
39
40
41
42
Mactan Ecozone II
20
34.88
75.19
67.74
96.39
69.06
119.37
63.30
43
44
45
46
MRI Ecozone
New Cebu Township
Northgate Cyber Zonec
47
Pacific Information
Technology Centerc
PBCOM Towerc
48
Mactan, Cebu
District of Tondo, Manila
City
Sabang, Danao City, Cebu
Cantao-an, Naga, Cebu
Filinvest Corporate City,
Alabang, Muntinlupa
Pascor Drive, Brgy. Sto.
Nio, Paranaque City
Ayala Ave., cor. Herrera
Street, Makati City
R-II Builders
79.15
28.29
122.83
18.71
0.57
0.12
52.99
Diversified Ecozone
Corporation
RCBC Realty Corporation.
26.02
423.95
Sarangani Resources
Corporation
Shoemart, Inc.
60.90
71.23
Facilities Incorporated
0.25
Tabangao, Batangas
86.00
63.84
0.61
25.00
33.86
0.30
50
People's Technology
Complex
Plastic Processing Center
SEZ
RCBC Plazac
51
52
1.05
54
0.28
Sarangani Economic
Development Zone
SM iCityc
56
57
58
Cannery, Polomolok,
South Cotabato
SM Central Business Park,
Bay City, Pasay City
Cabangaan Point, Subic,
Zambales
Shaw Boulevard,
Mandaluyong City
1.54
60
61
63
64
21
50.00
65
20.66
Proclaimed
66
Abra Agro-Industrial Center
Gadanni, Tayum,
34.29
67
68
Allegis Information
Technology Parkc
69
Amihan Woodlands
Township
2,312.69
70
Ayala de Zamboanga
Industrial Park
Carmelray International
Business Park
Cavite Eco-Industrial Estate
Nonito J. Bernardo
Development Inc.
Carmelray Industrial
Corporation
Cavite Eco-Industrial Estate
Corp.
Cavite Productivity and
Economic Zone Corp.
Luisita Industrial Park Co.,
Prime East Properties, Inc.
50.00
300.00
26.68
31.93
80.62
50.32
71
72
73
Cavite Productivity
Economic Zone
Central Technopark
Eastbay Arts, Recreational
and Tourism Zone
74
75
76
77
78
79
80
81
82
83
84
85
Canlubang, Calamba,
Laguna
Pasong Kawayan II, Gen.
Trias, Cavite
Sahud-Ulan, Tanza, Cavite
San Miguel, Tarlac
San Roque, Angono &
Darangan, Binangonan,
Rizal
Tagpuro, San Isidro, New
Kawayan, Sto. Nio,
Tacloban City, Leyte
Trece Martirez & Tanza,
Cavite
Rosario, Cavite
Mang-hinao & Balayong,
Bauan, Batangas
Balacad, Laoag City, Ilocos
Norte
Larap, Jose Panganiban,
Camarines Norte
Kelly, Tuding &
Gumatdang, Itogon,
Benguet
Lopez Jaena Street,
Subangdaku, Mandaue
City, Cebu
29.55
5.71
40.00
104.95
116.22
53.81
77.47
0.66
33.13
79.15
30.00
133.26
Sitio Caridad,
Banquerohan, Legaspi
City, Albay
San Rafael & Sta Anastacia,
Sto. Tomas, Batangas
22
86
MSE Centerc
87
90
91
92
PNOC Petrochemical
Industrial Estate
Polambato-Bogo Economic
Zone
Rapu-Rapu Ecozone
5.01
Provincial Government of
Agusan Del Norte/ PEA
Asea One Corporation
62.07
88
89
93
94
95
96
97
98
99
100
Shannalyne Technological
and Environmental Park
South Coast Ecozone
101
102
103
104
105
26.50
63.48
136.97
41.39
87.43
215.92
25.79
Shannalyne, Inc.
258.05
195.54
106.47
66.63
41.71
6.86
92.88
18.67
52.67
237.91
5.00
Since PEZA is attached to DTI, its Chair is the Secretary of DTI, and the Board is also
composed of 12 other members which are undersecretaries of the following: Department of Finance
(DOF), Department of Labor and Employment (DOLE), Department of Interior and Local
23
ii)
iii)
iv)
v)
vi)
The PEZA Board had the authority and function to set the general policies on
the establishment and operations of the Special Economic Zones, industrial
estates, export processing zones, free trade zones and the like;
The Board should review proposals for the establishment of the Special
Economic Zones based on the set criteria of the Act, and endorse to the
President the establishments of these economic zones, industrial estates, export
processing zones, free trade zones and the like. After which, the authority shall
facilitate and assist in the organization of said entities;
The Board had the task of regulating and undertaking the establishment,
operation and maintenance of utilities, other services and infrastructure in the
ECOZONE, such as heat, light and power, water supply, telecommunication,
transport, toll roads and bridges, port services, etc., and to fix just, reasonable
and competitive rates, charges and fees;
The Board had the task of approving the annual budget of the Authority and the
ECOZONE developmental plans;
The Board had the responsibility of issuing rules and regulations to implement
the provisions stated in the Act;
The Board had the task of rendering annual reports to the President and the
Congress.
ii)
www.peza.gov.ph
24
iii)
iv)
v)
vi)
processing zones are allowed to import capital equipment and raw materials free
from duties, taxes and other import restrictions.
Free Trade Zone refers to an isolated policed area adjacent to a port of entry
(such as a seaport) and/or airport where imported goods may be unloaded for
immediate transshipment or stored, repacked, sorted, mixed, or otherwise
manipulated. However, movement of these imported goods from the free-trade
area to a non-free trade area in the country shall be subject to customs and
internal revenue rules and regulations.
Tourist/Recreational Center refers to an area within the ECOZONE where
tourist accommodation facilities such as hotels, apartelles, tourist inns, pension
houses, resorts, sports and/or recreational facilities are provided to render
tourism services for both local and foreign tourists, travelers and investors in
accordance with the guidelines issued by the PEZA.
Agro-Industrial Economic Zone refers to a large and suitable tract of land
subdivided and developed in accordance with a comprehensive plan, with
provision for basic infrastructures and utilities designed to host primarily
agricultural and or natural resource-based processing activities which are exportoriented. Accordingly, the industry mix of an agro-industrial ecozone should be
influenced mainly by the agricultural and natural resources abundant in their
surrounding areas.
Information Technology (IT) Park refers to an area developed or which has the
potential to be developed into a complex capable of providing the necessary
infrastructure support facilities and amenities to the IT industry in order to
promote the development and export of IT software products and services and
other IT related activities.
ii)
iii)
iv)
v)
vi)
vii)
viii)
Other areas, which do not meet the foregoing criteria, may still be established as
ECOZONES: provided, that the said area shall be developed only through local government
and/or private sector initiative under any of the schemes allowed in Republic Act No. 6957 or the
Build-Operate-Transfer law, and without any financial exposure on the part of the national
government.
N. Incentives
The PEZA provides incentives to respective clients who want to do business with them. In
fact these incentives have made PEZA a more competitive government agency in the country and
gave it a competitive edge over other economic agencies. The incentives provided by PEZA are
divided into two, which are the incentives for economic zone export, tourism and information
5
technology enterprises and incentives for economic zone developers. They are the following :
For Economic Zone Export, Tourism and IT Enterprises:
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
Income Tax Holiday (ITH) or Exemption from Corporate Income Tax for four
years, extendable to a maximum of eight years;
After the ITH period, a special 5% Tax on Gross Income, in lieu of all national
and local taxes;
Exemption from duties and taxes on imported capital equipment, spare parts,
supplies, and raw materials. Also breeding stocks and/or genetic materials or the
equivalent tax credit on these items, when sourced locally;
Domestic sales allowance equivalent to 30% of total sales;
Exemption from estate taxes, wharf age dues, imposts and fees;
Permanent resident status for foreign investors and immediate family members;
Employment of foreign nationals
Simplified import and export procedures;
Other incentives under Executive Order No. 226 (Omnibus Investment Code
of 1987), as may be determined by the PEZA Board.
iii)
iv)
v)
vi)
Ibid.
26
vii)
viii)
O. Services
In line with PEZA's vision, mission and goals, PEZA is to provide a suitable environment of
workplace for foreign investors through its ready-to-occupy economic zones located in the every
region of the country (See Table 5).
Aside from providing incentives for zone locators and developers, PEZA registers local and
foreign investors as: export enterprise; domestic market enterprise; pioneer enterprise; free trade
enterprise; zone facilities enterprise; zone utilities enterprise; service enterprise; tourism enterprise;
ecozone developers; or regional warehouse operators. This is to allow PEZA to regulate and
supervise the enterprises in the ECOZONE in an efficient and decentralized manner, as well to
concentrate on the common needs of the firms listed under each category. It also administers the
use of zone facilities in public ecozones such as power and water, communication, standard factory
buildings and recreational areas. It also assists in maintaining industrial harmony in the zones by
providing effective mechanisms for early settlement of disputes between the laborers and the
management in order to eliminate unnecessary conflicts (Chapter IV, RA 7916) and resolving
ecozone-related problems. PEZA is also responsible for the defense and security of the economic
zones, such as internal security and firefighting services (Section 9, RA 7916). PEZA is also tasked
to establish one stop shop centers for the purpose of facilitating the registration of new enterprises
in the ECOZONES, as well as other needs of existing enterprises. In these one stop shop centers,
all appropriate government agencies that were involved in registering, licensing or issuing permits to
investors should assign their representatives to attend to investors requirements (Section 36, RA
7916).
Lastly, it provides information on investment prospects in economic zones; tax incentives,
privileges and requirements, rules and regulations; availability of standard factory buildings and
areas in the ecozones; general business conditions prevailing in the country; and functions and roles
of ecozones in economic development.
P. Economic Impact
PEZA has made significant impact on the economy in terms of investments, employment,
and export earnings. Investments registered with PEZA have been increasing for the past few years.
For the year 2004, PEZA recorded an investment of P46.138 billion. This represents an increase of
46.138% compared to year 2003 where PEZA had a total investment of P28.395 billion. In terms
of employment, ecozone employment grew by 12.10% from 907,127 in 2003 to 1,016,880 in
2004 (See Table 6). Total number of approved projects for 2004 was 308 compared to 244 in
2003 representing an increase of 26.23%.
27
Ecozone Employment
229,650
304,557
380,625
562,085
609,044
617,690
696,035
708,657
820,960
907,127
1,016,880
Growth Rate
32.62 %
24.97 %
47.67 %
8.35 %
1.42 %
12.68 %
1.81 %
15.84 %
10.50 %
12.10%
Source: www.peza.gov.ph
PEZA has earmarked several advantages of investing in the Philippines. The following are
perceived to be its strengths compared to other countries:
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
x)
http://www.peza.gov.ph
28
xi)
xii)
xiii)
Ideal place for expatriates and their families. Availability of quality primary,
secondary and tertiary education. Housing facilities meet western standards at
very reasonable rates. Availability of quality health care services. Best sporting
and recreational facilities.
A market composed of 80 million Filipino consumers.
Under the Generalized System of Preferences (GSP), the Philippines continue to
enjoy tariff preferences when exporting various products to developed countries
such as the United States and those in Europe. In contrast, many of the
neighboring countries in Asia no longer enjoy this advantage, thus giving the
Philippines an edge in competing for the export market. What is also significant
is that the country is still a long way from being graduated from these GSP
privileges, so investors can look forward to enjoying them for some time to
come.
29
PEZAs jurisdiction, on the other hand, was to establish the legal framework and
mechanism for the integration, coordination, planning and monitoring of special economic zones,
industrial estates or parks, export processing zones, and other economic zones.
2. Composition of the Governing Board
The Board of EPZA was composed of the following: the Deputy Governor of the Central
Bank of the Philippines (presently, the Banko Sentral ng Pilipinas); the Undersecretary of Finance
(DOF); the Vice-Chairman of the Board of Investments (BOI); and the Undersecretary of the
Department of Trade and Tourism, while the remaining members were to be appointed by the
President, with the consent of the Commission on Appointments. Moreover, the President was the
one with the power to designate its Chairman, from among the members of the Board. The
Chairman of the Board of EPZA was also the Administrator of the Authority.
The Board of PEZA, on the other hand, was to be headed by the Secretary of the
Department of Trade and Industry (DTI). Its members were composed of the undersecretaries of
the following: Department of Finance (DOF), Department of Labor and Employment (DOLE),
Department of Interior and Local Government (DILG), Department of Environment and Natural
Resources (DENR), Department of Agriculture (DOA), Department of Public Works and
Highways (DPWH), Department of Science and Technology (DOST), Department of Energy
(DOE); Deputy Director General of the National Economic and Development Authority; one
representative from the labor sector; and one representative from the investors or business sector in
the economic zone. The Director General of PEZA was only given the position of Vice-Chairman
of the Board, and would be appointed by the President.
3. Incentives
Investors of EPZA had enjoyed the following privileges: all merchandise, raw materials,
supplies, equipment, machinery, etc, within the zone were not subjected to customs and internal
revenue laws and regulations; net operating loss carryover accelerated depreciation; exemption from
export tax; foreign exchange assistance; and exemption from local taxes and licenses.
Business enterprises registered in PEZA were also entitled to the same fiscal incentives
provided under EPZA. Moreover, tax credits for exporters using local materials as inputs were to
receive the same treatment provided under the Export Development Act of 1994.
C. Exemption from Taxes
Business enterprises registered under EPZA were exempted from payment of any and all
local government imposts, fees, licenses, or taxes, except real estate taxes, as imposed under
Commonwealth Act No. 470 and Republic Act No. 5447.
No taxes, whether local or national, was imposed on business establishments of PEZA. In
lieu of paying taxes, 5% of gross income was to be remitted to the government: 3% to the national
government, 1% to the local government unites affected by the declaration of the ECOZONE, and
1% for the establishment of a development fund that was used to develop municipalities outside of
and contiguous to each ECOZONE.
30
Source: www.peza.org
31
Source: www.peza.org
Source: www.peza.org
32
xiii)
xiv)
2. Operating Groups
In order to ensure competent and efficient services for investors, BOI is divided into four
(4) operating groups: Investments Promotion Group, Technical Services Group, Industry
8
Development Group, and Project Assessment Group.
7
8
www.boi.gov.ph
Ibid.
33
Investment Promotions Group (IPG) is tasked to generate investments and improve the
image of the country as a viable investment destination through the formulation and
implementation of investment promotion strategy for synchronized investment promotion efforts
including the generation of investment opportunities, conduct of inbound and outbound missions,
enhancement of investor servicing including the facilitation of investors transactions and
requirements and the implementation of special projects and other investment promotion related
activities.
Technical Services Group (TSG) is primarily responsible in providing support services to the
Board and its clientele through the enhancement of management processes, efficient dispensation of
incentives, design and implementation of information systems, rendering of legal support on
investment-related issues, and conduct of human resource development programs.
Industry Development Group (IDG) is in-charge of preparing the annual Investment
Priorities Plan. It is also tasked to formulate policies and develop programs/business
plans/roadmaps that would hasten and sustain the development of key industry and service sectors
with emphasis on human resources development, technology acquisition, industry linkaging and
commercialization. It also monitors and coordinates with relevant units/agencies/institutions in
the implementation of the above programs/business plans/roadmaps. It also develops and
monitors strategies and measures to deal with the countrys international trade and environmental
commitments; and provides technical industry expertise on tariff and related concerns and on
international trade negotiations.
Project Assessment Group (PAG) is in charge of evaluating, registering, supervising,
monitoring and giving project assistance to registered firms. Its goal is to give total investor
satisfaction from the time the investor seeks registration, through the infancy stage of operations,
and up to the time that the firms are fully operational. It is fully accountable in all aspects of project
registration, supervision and monitoring of all registered projects, including those based in the
regions.
3. Incentives
As stated in Book I of the Omnibus Investments Code, an investor can enjoy certain
benefits and incentives, provided that he invested in preferred areas of investments found in the
9
current Investment Priorities Plan (IPP) . An enterprise could still be entitled to incentives even if
the activity was not listed in the IPP so long as: at least 50% of production is for exports, if
Filipino-owned enterprise; and at least 70% of production is for exports, if majority foreign-owned
enterprise (more than 40% foreign equity). BOI-registered enterprises are given a number of
incentives in the form of tax exemptions and concessions listed below. These are incentives may be
classified as fiscal incentives; non-fiscal incentives; and incentives for regional headquarters and
regional operating headquarters in the Philippines.
The following are the fiscal Incentives
The IPP, which is issued annually by the Board of Investments, was a list of promoted areas of investments eligible for
government incentives in consultation with related government agencies and the private sector.
34
i)
ii)
iii)
iv)
v)
vi)
Incentives for Regional Headquarters (RHQ) and Regional Operating Headquarters in the
Philippines (ROHQ)
i)
ii)
iii)
iv)
35
36
the same year, Olangapo City Mayor Richard J. Gordon was appointed as the first chairman of the
Subic Bay Metropolitan Authority (SBMA).
SBMA was authorized to manage and develop the ship repair and shipbuilding facilities,
container port, as well as the oil storage and refueling stations; to attract and maintain local and
foreign investments; to promote the economic and social development of the country primarily in
Central Luzon; to establish and regulate the operation and maintenance of utilities, services and
infrastructure; to operate directly and indirectly tourism-related activities; and to protect the
Freeport's forests.
2. Incentives
10
ii)
iii)
iv)
v)
Right to freely engage in any business, Right to freely engage in any business,
trade, manufacturing, financial or service activity and to import and export freely
all types of goods into and out of SBF, subject to certain laws and regulations;
Right to employ foreign nationals subject to evidence of unavailability of
comparably-skilled Filipinos within the Philippines;
Exemption from all national and local taxes, in lieu of which a final tax of 5% of
gross income must be paid;
Visas for foreign nationals;
Unlimited entry to foreign direct investments.
An SBF Enterprise which operates facilities or services within the SBF (SBF Facilities Operator) was
entitled to the following additional incentives (www.itcilo.it):
i)
ii)
iii)
Right to manage the facilities on the real property it owns, has acquired or has
leased within the SBF;
Right to lease out real property it owns or has leased within the SBF, and to
acquire and lease land and sell or lease out facilities to SBF Enterprises, subject
to certain guidelines;
Right to make improvements on buildings and other facilities, and develop
infrastructure necessary to enhance the SBF's efficient operation, or grants
contracts or concessions to other private or public parties for the construction or
provision of any of the said facilities, subject to certain guidelines.
10
www.itcilo.it
37
5% final tax in lieu of the national and local taxes. Thus, PEZA could have an advantage over
SBMA in terms of attracting foreign investors, as evidenced in Table 7.
Table 7: Total Approved Foreign Direct Investments by Promotion Agency, 20002003
(in million PHP)
Agency
Board of Investments
Philippine Economic Zone Authority
Subic Bay Metropolitan Authority
Clark Development Corporation
2000
15,529.4
61,089.2
1,998.0
17,867.6
2001
29,042.9
28,371.4
287.7
705.8
2002
8,815.1
22,796.1
746.7
13,690.7
2003
8,348.5
24,922.8
365.3
373.8
Total
61,735.9
137,179.5
3,397.7
32,637.9
Source: www.boi.gov.ph
38
products were they going to sell, in their case, how many reports were they going to sell. How
many personnel were they going to employ. Basically, requirements during the applications were
needed by PEZA to justify its existence.
Other questions were based on the projections, how
much infrastructure were they going to build locally or foreign and how much equipment will they
purchase locally or imported.
1. Post-reports
As said by the interviewed firms, PEZA required monthly reports, quarterly and annual
reports. The monthly report was relatively the simplest among the reports. It included the
revenues that the firm was able to produce during the month, the number of their employees, the
firms current bank account, and the breakdown of their salaries.
The quarterly report, on the other hand, was more detailed. This included the breakdown
of the employees with regards to gender. The quarterly report was more concentrated with regard
to their operating expenditures, for example, their expenditures on internet services. The quarterly
report was more geared towards manufacturing companies, and the firm did not fill out many pages
of the monthly report due to inapplicability, like waste reports and work-in-progress reports.
The annual reports submitted to PEZA consisted only of the audited financial statements of
the firm.
i)
Did PEZA still help them after its establishment or did they let go afterwards?
The PEZA let go of the firm after its establishment, except if the local government units stir
a little bit of trouble. For example, in the city of Makati, the LGU had yet to sign a MOA with
regards to the PEZA law. The Makati government wanted to collect taxes, and disregard their tax
incentive, but PEZA was there to intervene and help the firms. PEZA also helped in processing of
the forms required by the government agencies, like import and shipping permits. For example if
the working permit of their CEO expires, then they would just go to PEZA instead of the bureau of
immigration and other agencies.
ii)
Many senators blamed the PEZA for its low tax collections mainly because of
the tax incentive. What was your position regarding the matter?
Definitely people would complain that theres a lot of money not remitted to the
government whether national or local mainly due to the tax incentive. However, it was more of a
give and take situation of the government. For the government, they would lose money for a
certain period of time, for eDatas case, 3 years. But companies investing in the country would still
be giving money to the government in terms of other means like employment for direct labor. In
case of the firm, there were 301 employees remitting income taxes. Of course, it was small
relatively to the income tax of the company itself, but there would be additional employment, in
their case medical professionals. The companies could also give income to suppliers, through their
purchases. It was a give and take relationship. Would the government want lower investments
coming in but higher unemployment, or the government would want the current situation where
there is higher investments and higher employment.
39
On of the firms said that the Bureau of Customs (BoC) and PEZA was not in good terms
since BOC was formed primarily to make revenues for the government, and PEZA, on the other
hand, offered duty free importation. Moreover, the local government units also could not get any
revenues from the PEZA firms. However, many people could realize the benefits that PEZA was
able to bring to the economy. One of the benefits was through employment. Convergys, for
example, employed hundreds of workers, and majority of which were graduates. The economy
could not generate such employment opportunity, and PEZA was responsible for producing the
said employment.
Other firms indicated that it was really unfair to blame the PEZA alone, since the
government could also gain revenues through other government agencies. They should consider
the benefits that the economy was getting from PEZA, especially through the generation of
employment.
iii)
Did PEZA still help them after its establishment or did they let go afterwards?
PEZA had been very supportive of their operations. For example, if their imports had been
harassed in the customs, then PEZA would be the ones to help them, or bail them out. Moreover,
PEZA also made the requirements of local governments and other government agencies easy for
them since PEZA was the one to process these requirements.
11
The following are considered as factors that contributed to the decision of firms to invest in
the country:
a. Philippine Setting
The Philippines is fast becoming a very good investment haven because of the many
economic zones developed and made available by the Philippine government to foreign investors.
As of May 2004, PEZA has 105 (65 operating and 40 proclaimed) special economic zones (See
table 2) situated all over the country with over 1,002 firms operating in the economic zones.
Secondly, the country is strategically located as it is within 4 hours flying time to major capitals of
the region. Lastly, the country serves as a critical entry point to over 500 million people in the
ASEAN market.
b. Workforce
The Philippines has a solid potential workforce that makes it easier for the company to
invest in the country. Filipino workers have significant differences with other workers in other
countries. Filipino workers are known for their competent skills and ability in the workforce. Aside
from that Filipino workers are easy to train. It would usually take a Filipino worker 8 weeks to train,
unlike other Asian workers, which could take 4 to 6 months to train. Aside from that Filipino
workers are friendly in nature. High literacy rate of about 94% plus the abundance of labor force of
about 380,000 college graduates per year made the company invest in the country. The Philippines
11
40
is also labeled as the third largest English-speaking country with solid potential workers in the
workforce. Moreover, due to the abundant resource of labor in the country or human capital,
Companies find the Philippines to be a very good investment setting to put up its operations
because of its very high potential growth. Most of the firms chose to expand also because of the
availability of target markets and clients. Convergys, for instance foresees that the Philippines would
be like India where it was able to employ more than 6000 workers from about 200 employees in its
first year of operation.
Also, there were many Japanese firms investing in PEZA already and thus there were
positive comments from firms already operating in the area particularly Japanese firms who were
satisfied with PEZA.
c. Incentives
Companies continue to enjoy the incentives which PEZA provides. This includes: four to
eight years income tax holiday (ITH), special 5% tax rate after the lapse of ITH for economic
locators, tax and duty exemption on imported capital equipment, unrestricted use of consigned
equipment, additional deduction for labor expense up to 150 percent, additional deductions for
training up to 150%, exemption from wharfage dues. Because of the incentives and the suitable
locations for their business operations, companies also benefits from 0% value-added tax from sales.
It was also noted that tax incentives were on a per activity basis and were dependent upon certain
parameters. A firm for instance was currently doing an activity on medical transcription, which was
tax free for three years, but it could still be extended for two to three years, depending upon certain
conditions. For example, when the three-year income tax incentive expired, and the firm engaged
in a call center activity, which was also tax free for three years; then, the firm would enjoy a threeyear incentive for the call center portion only. Most companies avail of the tax free importation on
equipments which allows firms to save money from their operations.
Another incentive they get from registering with PEZA is the affordable lease rates
specifically for public industrial lots. Lease rates for public economic zones ranges from P10.77 to
P17.55 per square meter/month. However, rates were adjusted starting January 1, 2005 from
P16.15 to P26.33 per square meter/month. Even with the adjustment in lease rates, most firms
indicated that the rates are still affordable compared to commercial areas.
d. Transaction cost and convenience
PEZAs economic zones are strategically located in various parts of the country whereby
companies have easy access to the different business districts. In addition, PEZA has made dealings
with foreign investors as easy as possible. Before, they would usually ask for a feasibility study from
these corporations who want to invest but now PEZA has changed the format and made the
registration document as a fill-in-the-blank type. Likewise, the office of PEZA houses different
government agencies that are related in transacting with these foreign investors. Hence, that made
it easier for these foreign investors to deal with them for they no longer have to transfer to other
government offices in registering their business proposals. Thus, PEZA has been the most attractive
agency that will assist these foreign investors when investing in the Philippines. Not only did PEZA
provide friendly and attractive economic zones in the country, but also made transacting business
with them as easy as possible.
41
Most of the firms chose PEZA because of convenience. PEZA prided itself of having a
one-stop shop. Firms operating at PEZA claim that they didnt have to talk to other government
agencies, like LGUs, in order to make transactions like visas, import permits, and other transaction
requirements. In other words, everything was localized at PEZA.
VIII. ASSESSMENT OF THE IMPACT OF PEZA
In order to assess the implications of PEZA to the country, the paper will look into the
rationale in the establishment of economic zones. According to a speech delivered by former
Deputy Minister of Trade Gerardo Espina before the Makati Business Club in 1982, the rationales
for the establishment of export processing zones in the Philippines were the following: to generate
employment, to earn additional foreign exchange, to transfer technology, and to develop the rural
or provincial sector. Yu (2004) added a fifth goal, which is to attract foreign investors.
A. Employment Generation
PEZA had been successful in generating employment since it took over EPZAs operations
in 1995. For the past ten years, employment in the economic zones had been growing by an
average of 16% (See Table 6). This figure was not surprising since majority of the commodities
produced by the industries in the zones were labor-intensive in nature.
However, the government had allowed contractualization in the economic zones in order to
maintain the countrys attractiveness to foreign investments. This movement had allowed the
corporations to pay the contractual workers on amounts less than the legislated minimum wage.
Some contractual workers also had to endure forced overtime with to little or no compensation,
and may even be required to work on Sundays and holidays. Moreover, majority of these
contractual workers were often fired before they could become regular employees.
In 2001, the Center for Womens Resources conducted interviews with two garment firms
in the Baguio City Economic Zone (BEPZ) namely Adriste, Philippines and Dae-Gu Apparel Corp.
According to the interviews, only 147 out of 700 employees in Adriste were regular employees.
Contractual workers also had to undergo several non-regular statuses before they could become
regular workers. Moreover, some of these contractual workers receive inadequate benefits or none
at all, from their companies.
B. Attracting foreign investment
BOI figures had shown that PEZA had been attracting the largest share of the total foreign
direct investments entering the country (See Table 7).
This was very advantageous for the economy since it would allow pioneer industries to
come into the country, thus increasing the variety of commodities and services that were being
provided by the business sector. However, it also could bring a crowding-out effect to our
domestic capital. As shown in Figure 4, Filipino investments accounted for only 16% of total PEZA
approved locator investments from 1995-2004. Japanese and American corporations already
accounted for more than half (56 percent) of total PEZA investments. The percentage of local
investments could even be understated since some joint ventures with foreign corporations might
be registered as Filipino investments.
42
Source: www.peza.gov.ph
43
44
No. of Firms
430
504
108
1,042
Percentage Share
41.27%
48.37%
10.36%
100%
On the other hand, the IT parks and buildings have 10 out of 17 (59%) with five or less
firms operating in the economic zone. A table below summarizes the IT parks and buildings
economic zones with five or less firms operating:
45
Table 10: IT Parks and Buildings Economic Zones with Five or Less Operating Firms
Name of Economic Zone
Diliman IT Building
Eugenio Lopez Jr. Communication Center
Export Plaza Building
GT Tower International
JY Square IT Center
Pacific IT Center
Philamlife IT Building
Robinsons-Equitable Tower
SM iCity
Summit One Office Tower
46
Businesses that export are more competitive than those that do not, and the
desire to succeed internationally is a major drive to lift performance
Businesses increasingly need to export to survive because their markets are under
attack from competing companies (often exporters from competing nations).
Standing still will erode their performance and ultimately threaten their viability.
47
to fall and profitability may rise again, but that can appear distant. The combined effect is that,
unaided, many firms are unlikely to take the large step into exporting, or if they do, then exit too
early. Here, advocates see a useful role for government as an educator, raising awareness of the
benefits of exporting and developing businesses skills and strategies (and possibly providing some
financial assistance) to enable them to overcome real and perceived obstacles to export success and
to make the initial transition.
On the issue of international market access, supporters of government-sponsored export
promotion argue that government can reduce regulatory and information barriers relatively simply
and cost effectively (Boston Consultancy Group, 2004). For a firm acting alone, however, the high
cost of doing this is likely to outweigh the potential benefits, if it is indeed possible for a private
firm to do. The more unfamiliar a destination country is, or the more rudimentary its institutions,
or the greater the role of government in its economy, then the more helpful it is for exporters
(including large firms and well-established exporters) if their own government has a trade presence
there. Government involvement may, in some circumstances, add to the exporting firms credibility
in the destination country.
A study by Seringhaus and Rosson (1998), comparing government export promotion with
private sector promotion strengthened the conclusion on the overall positive impact of government
export promotion strategies. They have compared government export promotion based on salesrelated activities, information-gathering activities, image or brand development activities, personnel
development activities and customer service activities. They have observed that sales-related
activities, specifically on-site sales and contact-making were much better for the private sector
promotion agencies than the government export promotion agencies. Image or brand development
activities namely market knowledge and skill, marketing capability and market strategy favored the
government-sponsored agencies.
Opponents of government involvement in export promotion point to the fact that, rather
than correct market shortcomings, it may worsen the situation. Although an advocate of
government-sponsored export promotion, Czinkota (2002) observes that it appears to many that
export promotion organizations over time have become bureaucratized and politicized. Export
promotion authorities have often become the grazing grounds for retired officials and have served
as havens for job generation. Governments are accused of using export promotion events such as
trade missions merely as tools to reward political friends. Goals have become blurred and efficiency
is low. Just like the creation of state-controlled firms, export promotion institutions, in many
instances, are said to have become a good idea gone bad.
The study by the Boston Consultancy Group (2004) found that government-sponsored
export promotion in Denmark, Malaysia, Chile and the United Kingdom displays some of these or
other flaws. Among the underlying problems are insufficient resources which hinder the execution
of programs; rudimentary, generic and poorly executed services which result to a decrease in the
number of potential participants who will avail of the services; variable quality of human resources
which through lack of coordination leads to inefficiency; insufficient understanding of the private
sector and its needs; and excessive bureaucracy due to government influence which decreases trust
from potential participants and leads to less participation.
48
49
4. Product Mix
In the short-to-medium term, the product mix that a country exports cannot change
greatly. Thus a country will be advantaged, to the extent that world demand for its exports is
growing fast. A countrys cost and quality competitiveness will determine whether it over- or underperforms competing countries to meet world demand in a given export segment (Boston
Consultancy Group, 2004).
5. Market Access
Market access encompasses physical distance, cultural distance, border controls and trade
policies. A country will be advantaged to the extent that it has more favorable access to fast-growing
and high-income markets. An important feature of the past decade has been the growth of regional
trade blocs that alter trade patterns and lift trade performance for some of the member countries
(Boston Consultancy Group, 2004).
6. Subsidies for Exports
Many developing countries, particularly in East Asia and parts of Latin America, have
pursued export-led economic growth to lift per capita income and transform their economic base.
Rapid growth and development, sustained for a long period, has been associated with a strong
export orientation (Kokko, 2002). Among the instruments that developing countries have used to
support exporters (and at times, domestic suppliers to exporters) are the provision of credit at
favorable interest rates, preferential prices for inputs like electricity and transport, lower tax rates,
tariff exemptions, and preferential access to foreign currency. Almost all of these measures are
defined by the World Trade Organization (WTO) as subsidies. Subsidies fall outside the scope of
export promotion programs because the WTO Agreement on Subsidies and Countervailing
Measures (the SCM Agreement) prohibits them. The SCM Agreement bans developed countries
from providing financial assistance that distorts trade in non-primary products by increasing a
countrys exports (or reducing its imports) above (below) what they would otherwise be. Countries
may take action against the adverse effects of subsidies through the WTO dispute settlement
procedures or by imposing unilateral countervailing duties. The restrictions on subsidies for primary
product exports are much looser than those for non-primary products. Under GATT, the
predecessor to the WTO, the Subsidies Code allowed developing countries to offer subsidies
consistent with their competitive and development needs. The SCM Agreement of 1994 still
provided for special and differential treatment of developing countries, but brought them closer in
line with developed countries. Specifically the Agreement provides that, once a developing
countrys per capita income is above US$1,000 a year, then that country has eight years within
which to phase out export subsidies (Laird, 1997). Many developing countries have reached the
end of that transition period in the past year or so, though extensions have been sought often.
Given the dominance of the above factors, the potential impact of export promotion
activities is somewhat narrowly circumscribed (Boston Consultancy Group, 2004). Export
promotion programs cannot change the economic conditions or market forces that largely shape
export performance; they can at best supplement market forces and are certain to be ineffectual if
they work against them (Czinkota, 2002). Even within the sphere of government policy, export
50
promotion will be of minor influence compared to the macroeconomic policies of both the country
and its trading partners (GAO, 1995).
It is not surprising, then, that there is little direct relationship between the level of exports
and the level of export promotion. Large export promotion expenditures tend not to show linkage
to export success. Among industrialized countries, those with particularly large exports typically are
not the leaders in relative or even absolute promotion expenditures (Czinkota, 2002),
This conclusion also holds at the firm level. From a large survey of US firms using state-level
export promotion assistance, Gencturk and Kotabe (2001) report that the relationship between
export assistance usage and effectiveness in terms of expected growth in export shares is nonsignificant. Thus, export promotion programs, irrespective of the extent to which they are used, are
found not to be instrumental in increasing export sales.
What they are saying is that export promotion programs do not automatically culminate in
sales. They may be necessary but not sufficient on their own. Certain capabilities have to be present
for a firm to realize increased exports. However, on measures other than export sales, Gencturk and
Kotabe (2001) find that the direct contribution of export promotion programs to a firms
competitive position and the indirect contribution to its profitability present a strong policy
argument in favor of these programs, suggesting they can provide an important platform for export
success.
Greater awareness of the limits to export promotion programs has seen some countries
reduce the resources devoted to them. Numerous efforts have been made to improve program
targeting and otherwise lift effectiveness. There has also been a shift in focus in some countries from
offshore activities, concerned largely with increasing the demand for a countrys exports, to onshore
activities concerned with improving the ability of firms to compete internationally. There is a
growing recognition too that export performance is inseparable from the overall performance of the
economy and that the productivity of firms serving the domestic market is crucial to international
competitiveness.
Accordingly export promotion, when done well, can provide the icing on the cake of
efforts to enhance a countrys export performance (Boston Consultancy Group, 2004). Welltargeted, well-designed, well-resourced, and well-executed programs can be effective. But they are
not a cure-all, rather they provide one element in a much more extensive prescription for export
success. Gencturk and Kotabe (2001) sum it up when they conclude that export promotion
programs are neither a panacea nor a complete waste of resources.
X. PHILIPPINE EXPORT PERFORMANCE
To ascertain the importance of export promotion agencies for the Philippines, the
Philippine export performance in 2003 shall be briefly reviewed. Data were taken from the websites
of the National Statistical Coordination Board and the National Statistical Office.
51
A. Trade Performance
Year
1999
2000
2001
2002
2003
Source: www.nscb.gov.ph
As shown in Table 11, the Philippine trade performance from 1999 to 2003 has been
dismal with a worsening balance of trade. From a favorable trade balance in 1999-2000, years
2001-2003 experienced a negative balance of trade.
Though year 2000 had a favorable trade balance of 3,587.38 million dollars, it was less than
that in year 1999. In year 1999, a favorable trade balance of 4,294.43 million dollars was recorded.
It was in year 2001 were a negative trade balance was recorded at the amount of 907 million
dollars. There was a large drop in exports valued at approximately 6 million dollars while imports
decreased at approximately 1.5 million dollars. This resulted in a decrease in total trade of
approximately 7 million dollars. Fortunately total trade in year 2002 increased to 70,634.68 million
dollars. However this increase in total trade did not reap positive results in the trade balance. 2002
had a negative trade balance of 218.34 million dollars. The increase in exports was less than the
increase in imports. This is also the case for year 2003. Exports increased to 36,231.21 million
dollars while imports increased to 37,496.50 million dollars. Thus, year 2003 recorded an
unfavorable trade balance of 1,265.30 million dollars.
The worsening trade balance may be relieved either through increasing exports or
decreasing imports. Imports constantly increase from 1999 to 2003 while exports vary irregularly.
Since imports may continue to increase in the following years, there is a need to improve exports to
cope up with such increases. A way to improve exports is through export promotion programs such
as those delivered by CITEM. In this regard, CITEMs export promotion programs play a crucial
role in the Philippine trade performance.
B.
The country's top ten trading partners recorded a total trade of $59.396 billion or 80.6
percent share to total trade. Receipts from exports amounted to $31.125 billion or 85.9 percent of
the total income while imports totaled $28.271 billion or 75.4 percent of the total expenditure.
52
Figure 6 shows the country's top trading partners. As shown in Figure 6, the United States
cornered 19.9 percent of the country's total trade. Exports to the US recorded an income of
$7.263 billion while imports from the US cost $7.400 billion, yielding a trade deficit of $136.94
million. Of the total exports to the United States, Electronic Products contributed the highest at
$3.481 billion or 47.9 percent, followed by Articles of Apparel and Clothing Accessories at $1.696
billion or 23.3 percent. Majority of imported products from United States was Electronic Products
billed at $5.708 billion or 77.1 percent of the total imports from US. Cereals and Cereal
Preparations was next at $231.59 million or 3.1 percent.
The country's second largest trading partner was Japan with total trade amounting to
$13.408 billion. Total exports stood at $5.768 billion while payments for imports were valued at
$7.640 billion, resulting to a $1.872 billion trade deficit. The biggest receipt came from payments
of Electronic Products at $3.641 billion or 63.1 percent of the country's exports to Japan. Ignition
Wiring Sets and Other Wiring Sets used in Vehicles followed with total receipts of $203.40 million
or 3.5 percent. Imported goods purchased consisted of Electronic Products worth $4.434 billion or
58.0 percent of the total imports from the country. Transport Equipment was next at $624.91
million or 8.2 percent.
Singapore's share to total trade reached $4.973 billion or 6.8 percent. Receipts from
exports to Singapore were placed at $2.431 billion while payments to imports totaled $2.542
billion, showing a deficit of $110.87 million. The bulk of exports to Singapore were Electronic
Products worth $2.021 billion or 83.1 percent of the total exports to that country and Petroleum
Products at $142.00 million or 5.8 percent. The major imports from Singapore were Electronic
Products with purchases of $1.205 billion or 47.4 percent and Mineral Fuels, Lubricants and
Related Materials with expenditures of $441.84 million or 17.4 percent.
The total trade share of Hong Kong to the country was worth $4.695 billion or 6.4
percent. Exports registered receipts of $3.094 billion while payments to imports totaled $1.601
billion, resulting to a surplus of $1.492 billion. Electronic Products was the country's major export
to Hong Kong with earnings of $2.677 billion or 86.5 percent. Gold was next at $70.61 million or
2.3 percent. Majority of imported items were Electronic Products which stood at $908.50 million
or 56.7 percent followed by Textile Yarn, Fabrics, Made-up Articles and Related Products worth
$224.63 million or 14.0 percent.
53
The major export to EU was Electronic Products amounting to $4.315 billion or 73.4
percent. The other top exports were Articles of Apparel and Clothing Accessories ($274.51
million), Coconut Oil ($214.26 million), Other Products Manufactured from Materials Imported
on Consignment Basis ($160.84 million), and Woodcraft and Furniture ($51.78 million). Among
the country's imports from the EU, Electronic Products was highest at $1.326 billion or 44.0
percent. Other top imports were Industrial Machinery and Equipment ($296.96 million),
Medicinal and Pharmaceutical Products ($187.75 million), Transport Equipment ($90.77 million),
and Metal Products ($89.13 million).
Total trade with countries of the ASEAN reached $12.980 billion or 17.6 percent of the
country's total trade. Exports to ASEAN countries were worth $6.582 billion while imports
accounted $6.398 billion, resulting to a surplus of BOT-G at $183.54 million. Singapore emerged
as the country's top trading partner among the ASEAN countries with total trade valued at $4.973
billion or 6.8 percent of the total trade with ASEAN. Exports to Singapore recorded earnings of
$2.431 billion while imports payment was $2.542 billion, resulting to a trade deficit of $110.87
million. The bulk of export to the ASEAN countries was Electronic Products with receipts placed at
$4.809 billion or 73.1 percent. The other top exports were Petroleum Products ($191.26 million),
Metal Components ($143.05 million), Coconut Oil ($60.20 million), and Fertilizers,
Manufactured ($42.97 million).
Leading the imports from the ASEAN countries was Electronic Products with purchases
54
charged at $2.254 billion. Other top imports were Mineral Fuels, Lubricants and Related Materials
($765.97 million), Transport Equipment ($296.11 million), Plastics in Primary and Non-Primary
Forms ($262.47 million), and Industrial Machinery and Equipment ($232.03 million).
55
division is subdivided to the following: hard goods division (furniture, gifts and toys and house
wares), soft goods division, (garments, footwear, leather goods, fashion accessories and other
wearable), agri-marine division, (food and plants), industrial goods and services division
(construction materials, computer services, soft wares, metal manufacturers, electronics), natural
products division and lastly, special projects division.
The second major division is the Corporate Services Group, which handles the legal aspect
of trade and the development and maintenance of a system of policies and programs that will ensure
professionalism, integrity and competence and creating an organization climate in which employees
talents are recognized and well compensated. Moreover, it also administers the cash inflows and
outflows, and other financial aspect. This group is subdivided to the following: human resource
development, budget and cash, controllership, general services, and shipping, travel, records and
documentations.
The third major division is the Information Services Management Group, which is
composed of the corporate planning division, system management division, multimedia services
division and the library and resource center division. This group manages all trade related
information that is needed in the company.
And the last major division is the Communication and Design Group, which is comprised of
the following subdivisions: creative services, publicity services, print and publications and exhibition
and design. The primary function of this group is to support export promotion activities with
promotional materials and media exposure that will project the quality image of Philippine export
products to target markets and to institutionalize in-house exhibition design capability in order to
expiate design and execution of projects.
C. Services
12
The services made available by CITEM is in line with the priority sectors of the Department
of Trade and Industry which includes construction materials, electronics, food, giftware and holiday
dcor, home furnishings, IT and IT- enabled services, marine products, motor vehicle parts and
components, organic and natural products and wearable. These services can also be seen at the
website of CITEM for easier access to interested enterprises.
D. Trade Missions
CITEM conducts and organizes trade mission activities together with trade fairs, to open
various export opportunities to Philippine exporters not only in the country but also to potential
markets abroad. It is also the agency which assists incoming foreign trade missions in order to
emphasize the Philippines export potential and to directly introduce high quality and superior
Philippine-made products to foreign investors and buyers. It also arranges outgoing sell missions
and incoming trade missions.
CITEM organizes the Manila F.A.M.E. International, Asian Ethnic Food Festival, BioSearch and Industry Search.
12
http://www.citem.com.ph/services.htm
56
E. Trade Fairs
CITEM organizes local and international trade fairs to promote Philippine made products
here and abroad. It also participates in international trade fairs in target export markets, focusing on
the countrys finest products and services.
F.
CITEM coordinates integrated technical and export marketing assistance programs to foster
the growth of emerging export industries.
1. Brand Development
CITEM was given credit for launching country branding in food labels. Philippine fruits
and juices such as banaba and lambanog were labeled Philippines Naturally and for the national
fruit, mango Philippine Super Mango
2. Development of the Philippine Animation Industry
CITEM also promotes the country as one of the major providers of animation and medical
transcription services.
3.
Transformation Project
CITEM believed that native materials such as abaca fiber, banana fiber, capiz, coco wood
shell, lahar, oyster shell, pia, bamboo, seagrass, and nito can be transformed to something different
and more useful products. Hence, CITEM promoted these materials for architectural and industrial
purposes. Today, many designers have submitted design concepts wherein these materials were
used, such as wall panels, ceiling ties and injection molding and are now being exported around the
world.
4. Promotion of Design Services
It was in 1999, that Movement 8, a promotional program for pioneering designers was
introduced. Movement 8 aspired in giving Philippine design its name in the international market.
5.
Natural and organic products became known worldwide for its value. CITEM, in response
to this increasing demand for these products, has set an Organic Certification and Inspection
Program to set standards for these products. A representative from the organic sector was tasked to
have farm visits as part of environmental scanning and inventory monitoring.
6.
57
materials are also presented in special displays. Top exhibit curators also assist the producers of these
products in its product development.
G. Merchandise/ Technical Consultancy Programs
CITEM aims for the steady growth of manufacturers in merchandise development by
having local and foreign consultants to ensure this. Thus, CITEM continues its cooperation and
networking with other relevant and government agencies and private institutions.
It provides assistance in matching buyers and exporters (through its catalog online) and
merchandise development. It also provides information services through multi-media library
facilities, database and publication.
H. In-Store Promotion
To generate consumer-level awareness of and demand for Philippine products, CITEM
mounts in-store promotions, in cooperation with leading retail outlets abroad. Cultural and tourism
presentations in coordination with the Department of Tourism (DOT) complement promotional
activities and provide consumers with a total Philippine lifestyle experience.
I. Buyer Assistance
CITEM provides an exclusive virtual showroom of firms that have qualified in CITEMorganized trade fairs and missions using the Catalog Online (COL), which provides a link between
exporters and buyers worldwide. CITEM also has the Trade Opportunities Program (CTOP),
which acts as a trade referral system for foreign buyers and Philippine exporters.
J.
Priority Sectors
CITEM has identified 10 priority sectors that are considered as having competitive
advantage in the international market in terms of its development and growth. The following are:
1. Construction Materials
CITEM sees the construction materials sector (see listing in Appendix A) as having the
potential to win in materials supply contracts to local and international markets since they are
perceived to have an advantage in terms of price and quality, environment-friendly operations,
customer orientation, sales and delivery reliability and post-sales service commitment. As of 2000,
the sector covers 135 Philippine Standard Commodity Classification (PSCC) categories.
Exports from 1996 to 2000 increased at an average rate of 16.5% but mainly due to the surge in
exports in 2000 where the construction materials sector increased exports by 79.7% or $ 149.5
million (See Table 12). In 2001, the sector accounted for 0.9% of the total Philippine exports (See
Table 13). Table 14 shows the value of merchandise exports for construction materials and it
growth from 1997 to 2001.
58
Increase/Decrease (Percent)
(18.6)
(17.2)
22
79.7
Source: http://www.dti.gov.ph/
B. Metal-based products
Iron and steel products
Copper products
Products
Doors
Windows
Joineries/moldings
Door and window frames
Plywood and veneer
Parquet panels/wood tiles
Panels/boards of waste wood
59
Glass materials
Cement products
Asbestos
E. Chemical-based products
60
1997
1998
1999
2000
2001
Annual Growth
Rate (%)
193,965,672
159,962,628
195,051,642
337,559,797
224,407,354
10.99
45,513,574
26,606,175
4,310,170
4,702,831
1,545,799
178,217
27,137,608
11,002,043
2,355,430
5,643,737
1,747,168
66,015
31,716,144
14,663,441
5,656,598
2,325,236
1,630,371
300
41,113,401
21,373,348
8,095,735
2,570,378
2,741,675
0
32,449,230
15,113,983
4,686,518
3,628,172
2,738,047
158,247
-3.74
-2.22
23.95
3.23
18.59
-65.63
8,170,382
6,323,215
7,440,198
6,332,265
6,124,263
-5.78
33,318,016
35,348,484
58,815,768
97,873,421
85,922,224
31.67
13,000,599
18,901
226,654
757,320
7,119,102
10,721,114
1,199,996
688,410
688,270
7,327,548
13,197,096
8,995,068
292,248
1,603,230
8,571,321
19,918,945
27,969,648
3,712,210
5,245,353
5,124,794
17,043,459
36,418,946
4,343,072
1,202,769
3,693,301
10.51
1,784.90
333.35
68.48
-12.06
12,195,440
14,723,146
26,156,805
35,902,471
23,220,677
25.08
91,960,498
21,318,375
70,642,123
73,933,905
13,986,507
59,947,398
82,691,675
6,905,658
75,786,017
176,425,305
7,316,117
169,109,188
89,879,107
4,916,273
84,962,834
14.14
-27.97
21.17
7,858,317
9,835,048
9,947,456
9,972,623
5,864,740
-3.66
4,702,833
3,155,538
6,690,762
3,144,286
6,873,307
3,074,149
7,134,754
2,867,869
3,309,573
2,555,167
-1.20
-5.06
7,326,401
5,494,693
5,668,847
6,741,928
6,699,055
-0.88
7,318,918
5,457,097
5,622,053
6,709,116
6,648,653
-1.00
7,483
37,596
46,794
32,812
50,402
112.65
7,988,812
8,212,890
6,211,752
5,433,119
3,592,998
112.65
While exports of construction materials have increased, the level of imports has decreased by
an average rate of 8% from 1996 to 2000 as shown in Table 15. The import component of the
sector covers 374 Philippine Standard Commodity Classification (PSCC) categories. The imports
of construction materials totaled US$660.2 million for year 2000.
61
Increase/Decrease (Percent)
5.2
(41.0)
(2.3)
6.4
Source: http://www.dti.gov.ph/
2. Electronics
The electronics industry has about 728 electronic firms, which is dominated by
multinational firms mostly owned by foreign firms. Foreign firms own about 72% of the electronic
firms industry while only about 28% are owned by local residents. As of 2002, the industry employs
about 335,000 workers. The industry includes sub-sectors such as semiconductors, electronic data
processing equipment, office and telecommunication equipment, communications and radar,
control and instrumentation, medical and industrial, automotive and consumer electronics. As
shown in Table 16, electronics industry accounts for 69% of the total Philippine exports with
United States, Japan, Netherlands, Singapore and Taiwan as the top export markets for the
electronics industry. In 2001 alone, the industry earned a total of US$24 billion in export revenues.
On the average, total electronic exports increased annually by 21% from 1996 to 2000.
Table 16: Summary of Philippine Merchandise Exports, by Major Product Grouping
(in USD Million)
Group
2001
2002
% of Change
Total exports to all countries
32.15
35.07
9.07
Electronics
21.62
24.22
12.03
Semiconductors
14.91
16.81
12.80
Electronic Data Processing
5.07
5.87
15.81
Office Equipment
0.18
0.13
(30.71)
Medical and Industrial
0.001
0.002
70.09
Control and Instrumentation
0.02
0.01
(29.11)
Communication and Radar
0.39
0.38
(2.97)
Telecommunications
0.22
0.20
(5.83)
Automotive Electronics
0.37
0.32
(13.18)
Consumer Electronics
0.47
0.49
5.31
Source: http://www.dti.gov.ph/
3. Food
The focus of CITEM with regards to the food industry can be classified as (a) fresh foods
and; (b) processed foods (See Table 17 for product coverage).
62
Fresh Foods
Processed Foods
Product Coverage
Bananas
Pineapple
Mango
Coconut (young)
Papaya
Watermelons
Melons
Pomelo
Jackfruit
Calamansi
Lanzones
Guavas
Chicos
Santol
Meat and Meat Preparations
Dairy Products and birds' eggs (processed)
Margarine, Shortening, and Vegetable Fats and Oils
Cereal and Flour Preparations
Processed Fruits
Processed Vegetables
Sugar and Sugar Preparations, Confectionery and Honey
Confectionery and Other Sugar-based Products (chewing gum,
soft/hard candies, gelatin and other sugar-based products)
Coffee (processed)
Cocoa, tea and mate
Beverages
Sauces, condiments, mixed seasoning, spices, flavorings, soups and
broth preparations
Animal feeding stuff
Miscellaneous edible preparations (food preparations for infants,
pasta, stuffed with food, etc.)
The fresh foods have four main products: banana, mango, pineapple and papaya. There are
23 banana producers/exporters registered with BOI and produces an aggregate capacity of 27.04
million metric tons. Majority of fresh bananas are grown in Mindanao. It is composed of some 5.9
million farmers and farm households, who provide raw materials for the banana processing industry.
The Mango industry on the other hand has 6 BOI-registered fresh mango
producers/exporters based in Manila and Mindanao. The aggregate annual capacity for mango is
about 47,232 metric tons. The fresh mango industry has some 2.5 million farmers and farm family
members who provide raw materials for the varied product lines of the mango processing industry.
As for the pineapple industry, only two BOI-registered companies operate and are based in
Davao. The two firms produce 17,650 metric tons per year. The fresh papaya industry is
supported by 420,000 farmers nationwide. The Papaya industry also only has 2 BOI-registered
producers/exporters and produces an aggregate annual capacity of 1.4 million metric tons.
63
As shown in Table 18, exports of fresh fruits decreased in 1997 but have since recovered
with an FOB value of US $354.143 million in 2000. Export of bananas continues to dominate the
fresh fruits sector which comprises 82.3% of the total exports for 2000. As for its market, Japan
continues to be the biggest market of the country for fresh fruits with 60.5% in 2000. (See Table
19)
Table 18: Philippine Exports of Fresh Fruits, 1996-2000
(FOB Value in Thousand US Dollars)
Fresh Fruit
1996
1997
1998
1999
2000
Total
303,240
286,490
281,190
298,130
354,143
Bananas
236,420
216,560
217,040
240,700
291,629
Mangoes
39,760
40,490
41,740
32,340
34,331
Pineapples
24,600
26,950
20,720
22,510
24,594
Papayas
400
120
90
1,610
3,297
Others
2,060
2,370
1,600
970
290
Table 19: Philippine Exports of Fresh Fruits, 1996-2000
(FOB Value in Thousand US Dollars)
Country
1996
1997
1998
1999
2000
Total
303,200
285,680
279,580
297,150
354,143
Japan
172,180
176,970
165,230
187,740
214,520
Korea
19,550
16,670
11,460
24,580
47,764
China
36,030
25,640
39,360
23,840
28,789
HKSAR
29,380
29,710
29,870
19,960
20,888
Taiwan
2,060
3,820
9,830
16,360
18,084
Others
44,000
32,870
23,830
24,670
24,098
4. Giftware and Holiday Dcor
The Philippine-made giftware and holiday dcor have gained the acceptance of
discriminating markets around the globe for innovativeness, trend-setting and excellent
interpretations of designs and concepts. The giftware sector includes desk accessories, greeting
cards and stationeries, picture frames and other materials made of animal shell and articles. As of
year 2000, world market for giftware was estimated to be at US $ 5.7 billion and the world market
th
has an average growth rate of 4.6% from 1996-2000. As of 2000, the country was ranked 14
among the top global exporters of giftware in the world and had a 2.8% growth rate from 19951999 (See Table 20). Though there was a drop in the value of exports, the value of imports have
also dropped making the giftware sector a net exporter. Although the sector has not yet fully
developed, the government remains confident that the sector will improve its earning for the
succeeding years. Figure 8 provides a summary of the export and import performance of the
country on giftwares.
Table 20: Top Global Exporters of Giftware
Country
China
United States
64
Rate %
1995-1999
10.8
(7.5)
Italy
Thailand
Mexico
U.K.
Indonesia
Spain
Germany
India
Netherlands
Vietnam
Taiwan
Philippines
Malaysia
Total
6.0
5.0
3.7
4.2
2.5
2.6
3.9
2.8
3.0
1.1
4.2
2.0
1.4
69.0
5.6
4.5
4.2
3.9
2.5
2.6
4.2
3.0
3.0
1.3
3.6
1.8
1.2
70.1
4.8
4.5
4.0
3.4
2.5
2.5
3.9
2.9
2.6
1.7
3.0
1.7
1.1
72.5
6.7
5.3
5.2
4.5
3.9
3.8
3.8
3.1
2.8
2.7
2.6
2.0
1.4
68.0
65
1.02
17.3
(13.8)
5.1
(3.4)
(4.1)
(2.2)
1.9
6.9
23.3
(7.1)
2.8
(5.5)
The holiday dcor sector on the other hand includes Christmas tree bulbs, lighting sets for
Christmas trees, Christmas trimmings, Easter activities articles and other festive articles. There are
about 180 firms in the industry, 19 of which are registered with the Board of Investments (BOI)
and employs about 250,000 workers. As of 2000, the world market for holiday dcor was estimated
to be about US $ 5.8 billion while the world market has a steady growth with an average growth
nd
rate of 8% for the period 1996-2000. As of 2000, the country was ranked 2 in the world in terms
of export market share. Table 21 provides the list of top exporters of holiday decors while Figure 9
presents the export and import performance of holiday decors.
Country
China
Philippines
Taiwan
USA
Germany
Thailand
Belgium
Netherlands
Poland
Mexico
Total
1997
68.9
2.4
2.3
2.8
71.3
66
5. Home furnishings
The Home furnishings sector is another sector classified as priority due to its export
potentials. It is made up of the furniture industry and house wares. The furniture industry includes
products such as leg items (chairs, tables, beds & setters), case goods (cabinet desks, chest of
drawers, kitchen storage units, and related products) and combination (building/home fittings,
shelves and ornaments). The house ware industry on the other hand includes product lines such as
basketwork, shell craft, woodcraft, ceramics, textiles, flowers & trees, metal ware, glass, H/M paper
and others.
The furniture industry is perceived to have an advantage in human capital as it has highly
skilled English speaking workers and produces quality craftsmanship. Also the industry have the
availability of some indigenous materials such as bamboo, buri, metal, plastic, rattan, stone, wood,
parts and others. The industry has three main production centers namely Metro Manila, Pampanga
and Cebu where there are an estimated 15,000 establishments dominated by SMEs (at 90% of
total). The cottage-small category covers about 65% (9,750 establishments), medium about 25%
(3,750 establishments) and large about 10% (1,500 establishments). The furniture industry also
employs about 500,000 direct workers, 300,000 indirect workers. (Source: Bureau of Domestic
Trade). As of 2001, the top export markets of the industry are USA and Japan, which comprises
72.5% of the total export market. For the period 1996-2001, the furniture industry showed
increasing export market except in 2001 where the industry experienced a drop in export earnings
to US $ 296.77 million. (See Figure 10)
67
Figure 10: Top Export Markets and Export Performance of the Furniture Industry, 2001
Top Export Markets of Furniture 2001
Source : BETP
Source:BETP
The house ware industry on the other hand has six (6) main production centers namely
National Capital Region, Region 3 (Pampanga and Angeles), Region 4 (Laguna, Rizal, Quezon,
Cavite), Region 5 (Albay), Region 6 (Bacolod, Iloilo, Aklan) and Region 7 (Cebu). For period
1996-2001, the house ware industry showed an increase in export earnings from 1996-1998 but
experienced a drop from 1998-2001. As of 2001, the industry earned US $ 268.38 million with
85.4% of the export earnings coming from USA and Japan. Of the product lines in the house ware
industry, basketwork (27.3%), textile (20%), ceramics (12.4%), and woodcraft (10.6%) achieved the
highest percentage share in the industry. (See Figure 11)
68
Figure 11: Top Export Markets and Export Performance of the House ware Industry
Top Markets: House ware
Source: BETP
Source : BETP
Table 22 below shows the improvement of personal consumption for household furnishings
in the domestic market from 1998-2000. Growth rate for 1999 and 2000 was at 8.1 and 7.0%
respectively. This only shows that the sector has potential not only in international market but also
in the local market.
69
Table 22: Personal Consumption of Expenditure for Household Furnishings in the Domestic
Market, 1998-2000
Items
Total (at current prices)
Furniture
Other Furnishings
Growth Rate
1998
39.34
16.52
22.82
1999
42.54
17.87
24.67
8.1%
2000
45.52
19.12
26.4
7.0%
The Philippines is considered as an affordable quality human resource country with over 29
rd
million skilled labor force with a literacy rate of 94%. It is also considered the 3 largest Englishspeaking nation with about 380,000 graduates per year. Its location is said to be strategic since it
serves as a gateway of international shipping and airlines and a critical entry point to over 500
million ASEAN market. Also the country is accessible by air within four hours from any Asian
capital (Japan, Korea, Singapore, Taiwan). Lastly, the presence of IT parks with fiscal incentives
offer with availability of IT-enabled floor area makes the country a good investment site for IT and
IT-enabled services.
7. Marine products
The fishing industry contributed 3.9% to the country's Gross Domestic Product (GDP) in
2001. Its share to the country's Gross Value Added (GVA) in Agriculture, Fisheries and Forestry
Group were 14.5% (P76.3 million, current prices) or 18.8% (P35.8 million, constant prices),
70
respectively. The sector employs 10% of the active labor force in agriculture and 5% of total labor
force.
The Philippines ranked 11th among the 30 top fish-producing countries in the world,
contributing a total of 387,680 metric tons in 2000. It came 2nd in world production of aquatic
plants including seaweeds. The country currently produces 5.7% or 0.66 million metric tons of the
world total production of 10.13 million metric tons.
Preservation technologies improved in recent years, extending the "fresh" line of marine
products. This resulted in a corresponding growth in the value of marine products in the domestic
and international markets. Demand is expected to continually rise due to an increasingly healthconscious public.
Local demand also outpaces supply for many marine products. Filipinos are also consuming
big amounts of octopus, crabs, lapu-lapu, cuttlefish/squid and lobster. Also in short supplies are
cultured pearls and ornamental fish. The country has hundreds of processors of marine products.
But most of them are small-scale operators engaged in drying/smoking of fish. Presently, there are
about 33 major firms (+ 14 BOI-registered firms for seaweeds). Tuna, prawns/ shrimps and
seaweeds are high-value marine products in the world market. Demand for these is growing both in
absolute terms and in rates of consumption. Europe, Japan and United States are our major
markets.
The tuna industry employs at least 18,600 people, inclusive of allied and support industries.
About 773,000 are engaged in municipal operations and 51,000 in commercial fisheries. Tuna
exports in 2001 were valued at US$ 118.6 million. This contributed about 25.8% to the total
marine products exports. From 1996-2001, tuna exports exhibited a decline with an average of
about 5.9%. One of the reasons for the decline is the increasing demand for fresh tuna in the local
markets. Tuna is used as raw material for the booming canning industry in the country. The
recorded decline was also a result of the strict competition with other tuna-producing countries in
the export market. The shrimps and prawns industry employs over 120,000 people and
contributed a total value in export of about US$ 125.7 million in 2001. This commodity was
recorded to be the highest earner during the said period, contributing about 27.4% to total marine
exports.
The seaweed industry on the other hand employs about 80,000 farmers and their families or
over 350,000 people. Seaweed farming families are widely distributed in the coastal areas in
Mindanao, mainly in Bohol, Leyte, Samar, Palawan, Zamboanga del Norte and Sur, Sulu, Jolo and
Tawi-tawi.About 70% to 80% of seaweed raw material requirements of the industry are sourced
from Mindanao.The processing industry directly employs 6,500 workers and is expected to grow
with seaweed industry. The growth in seaweed industry is expected to contribute to the growth of
support industries such as shipping, stevedoring, hauling, trucking, and plastic manufacturing. In
1997, the financial crisis that hit Asia slowed down the growth in export of seaweed because of
scarce capital and high interest rate. This resulted to the lower demand by foreign buyers. Also, it
was affected by the seaweed production decline brought about by the El Nino and La Nina weather
phenomena. Seaweed exports in 2001 totaled US$71.5 million. According to 2000 FAO Statistics
Database, the Philippines is the 2nd top producer of seaweeds. It produced 656,631 metric ton or
6.5% to the total world seaweed aquaculture production. (See Table 23)
71
Year
1996
1997
1998
1999
2000
2001
The automotive industry represents a significant portion of global economic activity with
extensive upstream and downstream linkages to many diverse industries and sectors. In the past
decade, the motor vehicle industry's contribution in output, employment, investments and exports
have been increasing. Moreover, the synergy within the industry has strengthened the linkages
between the motor vehicle assemblers and the motor vehicle parts and components manufacturers.
The Philippine motor vehicle industry is comprised of two sectors: the motor vehicle
assembly and the motor vehicle parts and components manufacturing. Table 24 shows the motor
vehicle assembly sector is grouped based on the type of motor vehicles, such as passenger cars,
commercial vehicles (utility vehicles, pick-ups, vans, trucks, buses, special purpose vehicles) and
motorcycles. The Philippines is a left-hand drive market. Table 24 shows the number of
participants and total capacity of the motor vehicle assembly sector. At present, the industry is
operating only at 40% of its total capacity due to the Asian Financial Crisis.
Table 24: Number of Participants and Total Capacity of Motor Vehicle Assembly Sector, as of
February 28, 2003
Sector
No. of Participants
Total Capacity
Passenger Car Assembly
14
221,450 units/yr.
Commercial Vehicle Assembly
21
145,950 units/yr.
Motorcycle Assembly
21
462,100 units/yr.
Table 25 shows the major players ownership structure, investment and employment in the
motor vehicle industry. It is principally dominated by Japanese automobile manufacturers: Toyota
Motor Phils., Inc., Honda Cars Phils., Inc., Mitsubishi Motors Phils., Corp., Nissan Motor Phils.,
Inc. and Honda Phils., Inc. Other principal motor vehicle manufacturers are Ford Motor Co. Phils.;
Columbian Autocar Corp., Pilipinas Hino Inc. and Norkis Trading Company. Toyota Motor
Philippines had the biggest investment with P4.9 billion followed by Honda Cars Phils. with P3.8
billion. Toyota Motor Philippines generated the highest employment with about 1,435 followed
by Mitsubishi Motors Phils. with 1,338.
72
73
Automotive Parts
830,821492
759,692,953
375,387,641
515,863,458
1,012,143,721
954,686,354
1,166,590,681
Motorcycle Parts
141,112,357
157,281,711
87,705,470
109,707,212
34,000
203,288
96,028
Total
971,338,849
916,974,664
463,093,111
625,570,670
1,012,177,721
954,889,642
1,166,686,709
Source: BETP
Passenger Cars
65,808
79,673
69,070
32,134
25,130
23,684
21,728
Commercial Vehicles
53,392
58,815
51,418
35,769
39,505
52,968
63,858
Motorcycles
126,956
126,956
225,138
170,571
168,254
230,000
226,959
Total
246,156
316,337
345,626
238,474
232,899
306,670
312,545
74
Product Sector
Leathergoods
Footwear
Costume Jewelry
Other fashion
accessories
Fine jewelry
Hats & headgear
Total
20
16
437
0.005
0.004
0.13
16
14
1999
2000
2001
2,173,014
407,197
238,100
86,117
28,659
23,682
12,407
18,232
2,580,211
2,463,161
440,094
272,720
76,184
28,750
25,016
16,538
20,886
2,903,255
2,337,620
454,412
292,814
76,949
24,725
28,733
12,045
19,146
2,792,032
75
3-Yr Growth
Rate (%)
4
15
11
(5)
(6)
10
3
3
19
K.
Budget of CITEM
CITEM gets its funds from the government and external trade organizations. In year 2002,
CITEM received from the government a budget of Php90 million and more than Php14 million
donated capital from international trade organizations. The government budget allotted for
CITEM increases annually but not enough for its operation to be efficient. In year 2003, CITEM
received a government budget of Php93 million and Php14.4 million donated capital from
international trade organizations. In year 2004, CITEM received a government budget of Php94
million (estimates for donated capital have not been recorded). However, CITEM spends more
than the allocated budget from the government. In year 2002 CITEMs operating expenses
amounted to more than Php153 million. In year 2003, it amounted to more than Php163.6
million.
Although CITEM is a government owned, it is not prevented from conducting incomegenerating activities. Through its various services, especially through local trade fairs and exhibits,
CITEM is able to gain profit which was be used to address their deficit. It is a fact that donations
from international trade organizations do not come on a regular basis which means that CITEM
does not have control upon them. Fortunately, the generous donations were more than enough for
CITEM to cover its deficit. With the profits earned from their services and donations received from
international trade organizations CITEM was able to have a net income in years 2002 and 2003. In
year 2002, CITEM recorded a net income of Php10.2 million. In year 2003, CITEM has a net
income of Php6 million.
Because of the deficit from the government allocation and uncertainty in the receipt of
donation, CITEMs services, especially international trade fairs and missions, are not fullysubsidized. Exporters share in the burden of expenses such as transportation, registration,
marketing and booth set-up fees. For international trade fairs, CITEM shoulders 80% of the
expenses while exporters pay the remaining 20%. Since their services are not rendered for free,
SMEs who cannot afford to pay the subsidies may be discouraged to avail of these. With this, there
is a need for the government to allocate an adequate budget to CITEM so that more firms can
enjoy its services. Increasing the budget allocation for CITEM will mean that more services will be
delivered for SMEs.
L.
Katha Awards is the award given to companies recognized for unique product innovation
and creative booth displays during trade fairs. The award upholds product development and design
competitiveness in the manufacture of Philippine furniture, gifts and house ware, jewelry and
fashion accessories, and holiday dcor. It also honors the skillful and quality workmanship of the
Filipino artisan.
2. Golden Shell Awards
The Golden Shell Award was launched in 1982 and is considered as the highest award or
recognition given by CITEM to Filipino exporting companies as a salute for excellence in
development of export entrepreneurship among small, medium and large-scale industries in the
76
manufacture of traditional and non-traditional products. Criteria would include the following: overall efficiency in exports specifically the companys quality management, manufacturing, research and
13
development, product quality, marketing and, the firms respective financial viability.
The award highlights three areas of excellence: Design, Manufacturing and Marketing. Two
special awards are also handed out. The Rising Star Award goes to a company with a unique
product that shows great potential in the international market. The Special Citation is given to
entities or personalities with valuable contributions to the growth and development of the
Philippine export industry.
M. Impact of CITEM on Firms
Listed below are the firms interviewed to determine the impact of CITEM on firms:
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
x)
Laras Gift and Decors (1996 Golden Shell Awardee for Design Excellence)
Asia Ceramics Corporation (1997 Golden Shell Awardee for Marketing and
Manufacturing Excellence)
Pacific Arts and Dcor International Inc. (1997 Golden Shell Awardee for
Manufacturing Excellence)
Riviera Clay Incorporated (1998 Golden Shell Awardee for Design and
Marketing Excellence)
Buena Mano Crafts Incorporated (2000 Golden Shell Awardee for Design
Excellence)
Castleberry Collections, Inc. (2000 Golden Shell Awardee for Manufacturing
Excellence)
Chings Handicrafts Inc. (Manila F.A.M.E. participant)
Manila Designs Inc. (Manila F.A.M.E. participant)
Jupiter Systems Inc. (2002 Golden Shell Rising Star Citation)
Speculum Corporation [formerly Jo-Liza International] (Manila F.A.M.E.
participant)
http://citem.com.ph/gsa_background.htm
77
broad categories of services are identified: product development, technical assistance, marketing
assistance and financial assistance.
a. Product Development
CITEM provides exporting firms product development assistance to able to identify
whether their products meet the standards of the international market. By coordinating with other
relevant public and private institutions, CITEM helps exporting firms expose their products to an
interim market where they could test its potential. CITEM also assists exporting firms in identifying
sources of raw materials for their products.
All the firms interviewed indicated that they utilized the product development assistance
provided by CITEM. However, most of them found the program to be applicable to large
companies only and do not cater to the needs of SMEs.
b. Technical Assistance
Technical assistance is particularly useful for exporters. Technical assistance may be provided
for production and/or processing, management, training, marketing and the like. For training,
CITEM coordinates with the Philippine Trade Training Center (PTTC).
All of the firms found little demand for CITEMs technical assistance service. They also
noted that the service is not done on a regular basis. It was also reported that firms didnt have the
initiative to attend these trainings but rather CITEM representatives were the ones who asked them
to participate. Firms also reported that they conduct their own technical assistance trainings and
have usually asked private companies to conduct the trainings.
c. Marketing Assistance
Market information (i.e., market prices, market trends, quality of goods/standards, supply
competitors, etc.) is the most useful information among exporters. All the surveyed firms
conformed that they seek market information regularly. Through trade fairs, missions and exhibits,
CITEM matches target buyers to exporters. CITEM helps exporting firms tap new markets and
increase their sales. Tapping new markets is perhaps the most challenging task for exporters in
developing countries. CITEM also promotes export products through publicity materials such as
catalogs.
Firms report that they have not taken advantage of the marketing assistance provided by
CITEM. They usually conduct their market researches on their own without assistance from
CITEM. Although firms indicated that the project of CITEM of providing a directory of potential
buyers has helped them a lot in terms of marketing their products to different markets. Most of the
firms believe that CITEM has helped provide marketing assistance indirectly through the inclusion
of their company in catalogs. It should be noted that the interviewed firms have not considered
seeking marketing assistance from CITEM.
78
d. Financial Assistance
Financial assistance through availability of export credit and insurance is one of the major
constraints that particularly new comers into the trade often face. It involves assistance for
preparation of letters of credit, documentary collection, foreign currency and efficient remittance
services, availability of offshore finance, international guarantees, etc. CITEM through the Small
Business Guarantee and Finance Corporation (SBGFC) provides exporters with financial assistance.
The SBGFC is a government corporate body created in 1991 by virtue of Republic Act 6977, as
amended by RA 8289, otherwise known as the Magna Carta for Small Enterprises. It supports the
development of small and medium scale enterprises by promoting various forms of financing and
credit delivery systems including short-term fast loans.
All firms have not tried availing financial assistance services from CITEM since they are not
aware of such financial service. They all report that there are better credit institutions available in
the market compared to CITEM. Firms state that private credit institutions are faster in the delivery
of loans.
e. Increase in sales and clients
Firms have indicated that their participation in CITEM trade fairs and missions have
increased sales by at least 25% while the number of customers increased by at least 30 %.
O. The Case of Ceramics Manufacturers Association
One industry that CITEM has made a significant impact is the Ceramic Manufacturers
Association (CREMA), a group association of ceramic manufacturers in the country. It was from
1984 to the 1990s that CITEM was able to help the growth of infant industries. These industries
included ceramics, Christmas decors, household linens, wooden dcor and handmade papers. It was
also during these years that CITEM had made available the integrated technical assistance to
support local entrepreneurs who wanted to export. This technical assistance includes two phases and
lasted for six years. This program consists of technical assistance in the areas of raw material
preparation, quality improvement, design, marketing and energy saving (Citem 1993).
CITEM basically assisted these companies through product marketing and promotion.
Aside from that, CITEM through its 3 to 5 year program of integrated technical assistance has
encouraged production capability as well as improvement of product quality. Furthermore, it was in
1984 that CREMA, a new ceramic manufacturers association asked for help from CITEM to source
foreign technical assistance. The potentials of the industry of ceramics were recognizable given the
ample availability of raw materials and creative craft skills. Hence, CITEM did not have a hard time
in getting integrated project assistance from the European community. With the start of such
assistance, the companies under CREMA, started to grow. With this growth, the ceramics industry
has been very significant in the increase in exports, employment as well as productivity.
In the years 1985 to 1992, CREMAs exports grew from $1M to $12M. Its employment in
the overall company factories, from 700 workers has increased to 3,500. The average productivity
on the other hand has also raised the P33,000 average per worker to P80,000-P120,000.
79
This growth of CREMA is indeed a success. Companies who did not ask assistance from
CITEM had a 584% growth from $4.67M in 1983 to $31.98M in 1992 from exports. On the
other hand, CREMAs overall exports from 1983 to 1992 had a 1100% increase from the time they
sought help from CITEM.
CITEM has helped CREMA through the following:
i)
Most of the CREMA companies were relatively new in the industry when they joined the
Manila F.A.M.E furniture show, an international trade fair. CITEM suggested that the company
should attend seminars in exports sponsored by the Philippine Trade Training Center. It was also
during this time that CITEM was able to issue hand outs to its approved exhibitors on proper
decorum during trade fairs such as what to answer for frequently asked questions; proper attire; and
tools needed to be equipped when joining trade fairs.
ii)
CITEM assisted most of the CREMA members through designs by providing consultants
assigned to specific fairs. CITEM made it possible that companies could hire the services of these
consultants. The consultants from CITEM helped companies in such a way that the company could
design products that would have an appeal or impact to the export market.
iii)
CITEM helped in the promotion of products through the International Trades that it organizes
and conducts. With this, sales of the industry increased tremendously. Due to the increase of sales,
employment increased from thirty (30) workers to more than four hundred (450) workers per
company. Hence, with the increase in manpower, output and efficiency in production also
increased.
ii)
iii)
The worsening trade balance is a signal that there is need to improve export
performance of industries. A way to improve exports is through more aggressive
export promotion programs such as those delivered by CITEM. CITEMs
export promotion programs play an essential role in the improvement of the
Philippine trade performance.
CITEMs prioritization of small and medium-scale enterprises is a good practice
as SMEs face the highest hurdles to export success. Also, CITEMs
identification of target or priority sectors is beneficial as this builds the necessary
expertise in industries where most firms wish to be internationally successful and
complements its the budget constraints.
The services offered by CITEM lack publicity as firms report that they arent
aware of most of its programs, and worse the government agency itself. Most of
the firms interviewed did not have knowledge about the services that CITEM
80
iv)
v)
vi)
81
of people. DBP avails some of its loanable funds through multilateral development banks such as
the World Bank (WB), International Bank for Reconstruction and Development (IBRD), Japan
Bank for International Cooperation (JBIC), Kreditanstalt fur Wiederaufbau (KFW), Asian
Development Bank (ADB) and the like.
It is able to fund its lending activities for widespread economic development through its
internal and external bank funds. Internal funds are bank deposits and annual income while
external funds come from commercial sources such as bond issuance, and borrowing from bilateral
and multilateral development banks [more commonly known as Official Development Assistance
(ODA)]. Clients of DBP are normally classified into two: Wholesale and Retail lending. Wholesale
lending is usually granted to Participating Financial Institutions (PFIs), which consists of banks,
investment houses and finance companies. Retail lending on the other hand consists of Window I
(industries which allow for better credit risks and greater potential to grow such as
telecommunications and technology), Window II (lending for small to medium scale enterprises or
SMEs) and Window III (for socialized lending).
DBPs plays an important role in the governments pump-priming activities through retail
and wholesale lending facilities to strategic sectors. It offers investment opportunities, business,
financial and lending products and services for foreign and local investors, thus serving as a channel
for sectoral development in industries such as transportation, telecommunications, power and
energy, agriculture, education and health care.
B. Types of Projects Financed
i)
Industrial
Large manufacturing and non-manufacturing industries
Small and medium manufacturing and non-manufacturing industries
Industrial Estate Projects
ii)
Public Utilities
Land, air and water transportation
Telecommunications
Power generation and distribution
Water supply and distribution
iii)
Community Development
Housing
Hospitals
Schools
Infrastructure
Eco-Tourism
iv)
Agro-industrial
Post harvest-facility
Agri-business
v)
82
vi)
(EMS)
and
Other Programs
Factoring
Loans Against Hold Out on Deposit
The DBP, under its new charter, is classified as a development bank and may perform all
other functions of a thrift bank. Its primary objective is to provide banking services principally to
cater to the medium and long-term needs of agricultural and industrial enterprises with emphasis on
small and medium-scale industries
DBP supports the growth of domestic capital markets and is the countrys major conduit of
international funds from multilateral and bilateral institutions for official development assistance
(ODA) programs and grants. The bank also continues its developmental thrusts on economic
pump-priming and program-type lending to strategic sectors like infrastructure, transportation,
telecommunications, power and energy, SMEs, agriculture and food security, education, health
care, housing, micro-finance, and environment. It also undertakes continuous institutional
strengthening efforts to ensure its viability and strategic positioning towards globally competitive
operations
Recently, DBP was recognized as the first Philippine bank to be ISO 14001 certified by
SGS Switzerland SA for its successful establishment and implementation of an Environmental
Management System (EMS).
XIII. THE SUSTATINED LOGISTICS DEVELOPMENT PROGRAM (SLDP)
A. Rationale
A 1993 USAID study revealed that transporting fruits and vegetables from farmlands to
end-users produces about 40% spoilage due to inadequate and inappropriate use of technology
which would amount to roughly P30 billion of spoilage per year. Another study in 1994 by NFA
asserts that about 20% of national corn production amounting to about P4.5 billion per year come
from spillage and spoilage.
83
Thus, an efficient transport of goods from production areas to consumption sites are needed
that would create:
i)
ii)
iii)
iv)
v)
The critical weakness of the traditional way of providing transport facilities and services has
been the absence of any structure of incentives to align the private interests of the supplier with the
public interest. The absence of competition (especially in ports) has enabled management, favored
customers and organized labor interests to appropriate part of the potential monopoly profit. It is
now widely felt that the potential loss of patronage, earnings and ultimately, employment resulting
from a failure to respond to consumer demand in competitive markets is the utmost powerful
means to force suppliers to respond to consumer requirements.
B.
84
The basic idea of the SLDP is to replace traditional and inefficient storage, handling,
transport and support systems and replace them with the introduction of modern storage handling
and transport system under proper quality control management. They aim to minimize
wastage/spoilage, lower freight and handling costs per unit of cargo, provide adequate ports,
practice Just-In-Time loading and delivery of cargo, and assure safety in transport. All of these
objectives have one major goal of lowering transport costs with the effect of lowering the goods
prices for the end-consumers.
The SLDP is accessible through DBP marketing units/branches and its participating financial
institutions such as private/government banks, financing, and leasing companies. Applicable
wholesale /retail facilities shall be used to fund SLDP projects. It aims to encourage private-sector
participation in the development of the countryside.
C. SLDP Budget
The SLDP budget primarily comes from the Japan Bank for International Construction
(JBIC) as an Official Development Assistance (ODA) fund. The total amount provided for SLDP
was 19.999 billion Yen. The project started in December 1999 and envisaged at appraisal that the
loan would be disbursed by December 2004. However, the five-year project was not able to loan
out the whole amount due to the following conditions and reactions:
i)
ii)
iii)
iv)
v)
vi)
Appreciation of Yen vis--vis Philippine Peso, which increased the total budget
denominated in Pesos.
Postponement of projects not yet fully committed, due to the risk associated
with the volatile exchange rate.
Increased cost of imported goods, due to the depreciation of Philippine Peso
which dampened the enthusiasm of businessmen and firms.
Uncertain political situation.
More prudent loan approval standards by DBP to safeguard portfolio quality
from further degradation.
There are a number of pending (about 36 as of January 2005) applications and
prospective (about 22 as of January 2005) applicants for the project.
Due to the market condition, DBP requested for a three (3) year extension for the loan to
be fully disbursed. The request was subsequently approved by JBIC and the extension will end on
December 2007.
D. Developmental Quotient System
SLDP adopts a Developmental Quotient System formulated against the backdrop of
experiences gained in the duration of the implementation of the Domestic Shipping Modernization
Program of the DBP. It uses a scale of preference for financing projects that will have a catalytic
effect on the countrys development and with distinct social benefits defined as follows:
i)
ii)
SLDP gives special preference to projects, which will have broader development impact and
multiplier effect specially in addressing the following national concerns:
i)
ii)
iii)
iv)
v)
Poverty alleviation
Employment generation
Capital formation both at regional and national scale
Creation of a wide range of small and medium enterprises within the sphere of
influence of the Road-RORO Ferry Network subprogram
Environmental protection
i)
ii)
nd
86
Reimbursement of expenditures maybe allowed provided such were incurred 180 days from DBPs
formal acceptance of loan application.
F. What are the terms and conditions under the SLDP?
The maximum amount of loan should not exceed 80% of the total project cost. Project
funds shall be re-lent in pesos to end-users and may be effected in one or more draw downs
depending on the nature of the project. The loans made through the SLDP program are payable in
Philippine pesos on amortization due dates which shall at least on a quarterly basis. The maximum
repayment term of the loan is 15 years with an allowable grace period from one (1) to three (3)
years
The interest rate may be prime fixed or variable rates depending on the terms and
conditions of the loan usually from 8.5% to 10.75%. For missionary areas, DBP sets an interest rate
st
of 8.5% for the 1 three years and 9.7% thereafter until the maturity of the loan.
G. What are the eligible projects under the SLDP?
The role of DBP with the actualization of all the goals of SLDP is to provide development
loans to the private sector and local government units (LGUs) to support SLDP-related
investments. SLDP provides investment portfolio such as development loans, lease-purchase
financing, equity participation, technical and training assistance and financial management advisory
to concerned sub sectors. The said services are focused on the sustainable distribution system such
as (a) Regular shipping; (b) Road RORO Ferry Network; (c) Post-harvest facilities; (d) Shipyard;
and (e) Institutional support services.
The three components of the SLPD are broken down as follows:
1. Bulk grains highway
The Bulk grains highway focuses on the production and distribution of agricultural
products with special consideration for rice and corn. This includes:
i)
ii)
iii)
iv)
v)
Grains Processing Centers (with mechanical shelling, drying, and bulk storage)
Bulk Trucking
Grains Terminals (including ports, silos, and bulk handling equipment)
Bulk Carriers
Other Post Harvest Facilities
87
development with close links to agro-industries, agricultural engineering, marketing and farm
storage management sectors.
As of the end of January 2005 a total of 110 applications from proponents in different parts
of the country worth P 696,059.00 million were approved. Also there are 8 applications yet to be
approved worth P 1.017.3 billion. About 4 prospective firms (with possible loan application worth
14
P 47 million) may be invited to use the SLDP funds. Some companies who applied for the loan
are as follows:
Table 31: List of Companies that Applied for DBP Loan, Road RORO Terminal System
Pipeline Projects
Proponent
Investment Cost
(Proposed)
P 220.0 M
Nature of Project
Project Location
Mindanao Grains
Processing Company Inc.
Quedan & Rural Credit
Guarantee Corp.
SBFP Bulk Terminal
Grains Terminal
Grains Terminal
Grains Terminal
Corn Processing Center
Corn Processing
Complex
Grains Processing Center
Aglayan, Malaybalay,
Bukidnon
Various Corn Farm in
Mindanao and Luzon
Subic Bay Free Port,
Zambales
Mabini, Batangas
Cebu City
Cagayan de Oro City
Aglayan, Malaybalay,
Bukidnon
Phividec Industrial Park,
Misamis Oriental
Isabela Province
Grains Terminal
P 200.0 M
Grains Terminal
P 150.0 M
LGU Province of
Isabela
General Santos Bulk
Terminal
ZDMC Bulk Terminal
Port Irene Bulk Terminal
Bagumbayan Grains
Processing Center
CASTECH Grains
Processing Center
Grains Terminal
P 1.0 B
P340.0 M
P150.0 M
P 350.0 M
P350.0 M
P 150.0 M
P 2.0 B
P 100.0 M
P 350.0 M
P 32.0 M
P 30.0 M
2. Cold Chain
The objective of the cold chain approach is to ensure that farm products will reach the market
in the freshest harvest condition. Listed below are the components of the Cold Chain:
i)
ii)
iii)
14
It should be noted that not all companies listed were able to acquire a loan from DBP
88
iv)
The traditional problem with agricultural products such as fruits and vegetables is that they
are sensitive and highly perishable. The quality and freshness deteriorate after harvest, as they are
being packed, stored and transported to different markets. As for meat products, live animals
shipped on vessels lose as much as 5% of their weight during the trip from farm to the destination
ports. Also, port and vessel operators prefer that livestock be slaughtered and shipped as frozen to
maintain sanitation and prevent fast deterioration of their ports and vessels.
The cold chain approach uses facilities that ensure that farm products will reach the market
in a fresh harvest condition. They require a controlled environment so as not to lose their content
and preserve their freshness and quality. They require careful handling and appropriate packaging
to protect them from compression, vibration and impacts from rough handling during loading and
unloading. The cold chain approach can be set-up at off-port area centers in the production areas,
and haul the commodities to the consolidation center at the port area. From there it will be stored,
sorted and kept under appropriate controlled temperature until the scheduled time of shipment or
distribution. This kind of approach will maintain the freshness of the fruits and vegetables and
lengthen their shell life, which allows more time for the marketing of the commodities. High value
temperate vegetables grown in Mindanao are normally air freighted but the costs are too expensive
and so water transport can be an alternative if the cold system is adopted.
SLDP can support all efforts aimed at improving traditional technologies and introducing
new techniques in the post harvest handling, packaging and storage of agricultural products for the
progress and development of the agricultural sector.
As of the end of January 2005 a total of 25 applications from proponents in different parts
of the country worth Php714.339 million were approved. Also there are 20 pending applications
yet to be approved worth Php1.193 billion. About 10 prospective firms (with possible loan worth
Php530 million) may be invited to use the SLDP funds.
3. Road-RORO Ferry Network (RRFN)
Integrating distribution into a network is a crucial issue, not only between modes in
intermodal transport, for the successful operation and development of shipping but also within the
road transport. The road transport industry has responded effectively and efficiently to increasingly
complex and demanding distribution requirements by introducing just in time system. Greater
integration of transport services, covering a wider range of activities and requirements has in many
cases helped counterbalance trends which otherwise might have lead to a significant worsening of
transport utilization. Water transport for instance has been integrated partly because of private
sector initiatives. Private sector on the other hand has lagged behind for greater integration of
ports and shipping to the well-developed land transport distribution of goods and services.
The objective of the Roll-On Roll-Off Ferry Network is to provide continuity for land
transports to travel from one landmass to another. Listed below are the components of RORO
Ferry Network:
i)
ii)
RORO shipping routes or linkages is categorized into (a) long-distance RORO links, and
(b) ferry-distance RORO link. Long distance link means a shipping link with more than 100
nautical miles link distance. Vessels plying on a long-distance link cannot make more than oneround trip in a day under normal conditions of vessel operation. A ferry-distance link on the other
hand refers to those pairs of ports located at two neighboring islands, which are accessible to each
other within a sailing time of two to three hours. Presently, the Maharlika Highway (PanPhilippine Highway) with a total length of 2,100 km is the single most important trunk line of the
country. There are two RORO ferry links operating between the main island of Luzon to Samar
and Leyte is linked to Mindanao.
H. Road RORO Terminal System Pipeline Projects
As of the end of January 2005 a total of 11 applications from proponents in different parts
of the country worth Php1.627 billion were approved. Also there are 8 pending applications yet to
be approved worth Php482 million. About 8 prospective firms (with possible loan worth Php350
15
million) may be invited to use the SLDP funds. Some companies who applied for the loan are as
follows:
Table 32: List of Companies and their Identified Routes for the Road RORO Terminal
System
Estimated Investment
Company
Route
Project Description
(Cost in Million
Pesos)
Philippine Nippon Kyoei Corp
Boac,
Marinduque
to Vessel Acquisition (1)
80
Lucena Cit
Almeda Star Ferry Corp
Real, Quezon to Polillo Vessel Acquisition
50
Islands
120
E. B. Aznar Shipping
Toledo City, Cebu to San Vessel Acquisition (2)
Carlos,
Tabuelan,
Cebu
to
Bantayan Island, Cebu
Grand Wega Ferry Corporation
Santander, Cebu to Sibulan, Vessel Acquisition (2)
80
Negros Oriental
Terminal Construction (2)
40
Millennium Shipping
Guihulngan,
Negros Vessel Acquisition (1)
Oriental to Dumajug, Cebu
Bacolod City to Dumangas,
Iloilo
Engr. Victor Lerias
Maasin, Leyte to Ubay, Terminal Construction
80
Bohol
Vessel Acquisition
President Manuel Roxas LGU
Zamboanga del Norte
Terminal Improvement
40
Placer, Masbate/Other Proponent
Masbate
Terminal Construction
30
Viva Shipping Lines
San Narciso, Quezon to Vessel Acquisition (2) units 300
Pasacao, Camarines Sur
Terminal Acquisition (1)
70
Donsol of Pilar LGU
Donsol,
Sorsogon
to Terminal construction (1)
Aroroy, Masbate
Vessel Acquisition (2)
15
It should be noted that not all companies listed were able to acquire a loan from DBP
90
Route
Bogo (Cebu) Palompon (Leyte)
Calapan Batangas
Kinobatan (Misamis Oriental) Guinsiliban (Camiguin)
Kolambugan (Lanao del Norte) Ozamis City (Misamis Occidental)
Rizal (Agusan Norte) Liloan (Panaon Island)
San Isidro Matnog Allen
Toledo City San Carlos (Negros Occidental)
Tabaco (Albay) Virac (Catanduanes)
Route
Carmen Isabel (Leyte)
Dumaguete City Santander (Cebu)
Jordan Iloilo City
Tabaco (Albay) San Andres (Catanduanes)
Tabuelan Escalante (Negros Occidental)
Tubigon (Bohol) Cebu City
Zamboanga City Isabela (Basilan)
Route
Bacolod City Dumangas
Boac (Marinduque) Lucena City
Abra de Ilog (Occidental Mindoro) Batangas
Bogo (Cebu) Placer (Masbate)
Dapitan City (Misamis Occidental) Dumaguete City (Negros Oriental)
Donsol (Sorsogon) Aroroy (Masbate)
Escalante Sta. Fe (Bantayan Island) San Remigio (Cebu)
Looc (Bohol) Argao ( Cebu)
Maasin (southern Leyte) Ubay (Bohol)
Manapla (Negros Occidental) Ajuy (Iloilo)
Masbate Talisay (Ticao Island) Jacinto (Ticao Island) Bulan (Sorsogon)
Navotas Orion (Bataan)
Pulupandan (Negros Occidental) Barcelona (Guimaras)
Real (Quezon) Polilio Island
Samal Island Davao City
Santander Siquijor
Ternante (Cavite) Mariveles (Bataan)
91
Route
Route
Real (Quezon Province) Dingalan (Aurora) Baler (Aurora) Dinalongan
Palanan (Isabela) Divilacan (Isabela) San Vicente (Cagayan Province)
DBP also identified Missionary Connections or Routes, which means that there are no
regular vessels serving the RRFN connection, but only serviced by pump boats or bancas. Included
in the 48 pre-identified RRFN connections are the following:
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
x)
xi)
xii)
xiii)
xiv)
xv)
xvi)
xvii)
92
xviii)
xix)
xx)
xxi)
xxii)
xxiii)
As of December 2004, out of the 49 identified areas, 26 areas have established connections
with service while the 23 remaining connections are still without service. The remaining 23 routes
without RORO service/port facilities are as follows:
Table 38: Routes without RORO Services
RRTS
Link No.
1
19
21
24
25
26
27
31
32
34
35
36
37
38
39
40
41
42
43
44
45
46
48
00
Route
Proposed Projects
93
Vessel
RORO Port/Vessel
RORO Port/Vessel
Vessel
RORO Port/Vessel
RORO Port/Vessel
Vessel
Vessel
RORO Port/Vessel
RORO Port/Vessel
RORO Port/Vessel
Vessel
Vessel
RORO Port/Vessel
RORO Port/Vessel
RORO Port/Vessel
Vessel
RORO Port/Vessel
RORO Port/Vessel
Vessel
RORO Port/Vessel
RORO Port/Vessel
Vessel
RORO Port/Vessel
DBP has identified three major seaboards for its RORO operation namely the Western
Seaboard, Central Seaboard and Eastern Seaboard. So far the developments for each seaboard are
as follows:
i)
ii)
iii)
So far, the Western Seaboard is the only route that has been completed from Luzon to
Mindanao. The Central and Eastern Seaboard has yet to be fully established. In line with this,
DBPs has established its goal for 2005 to make all three seaboards operational. Specifically, DBP
has set its priority on the completion of the following projects by the end of the year:
i)
ii)
iii)
94
iv)
v)
vi)
Some of the technological developments needed for a successful RORO operation are the
following:
i)
Increasing capital requirements in the construction of RORO terminals and
warehouses;
ii)
Utilization of RORO ferries, in particular, could produce significant reductions
in the costs of cargo handling, which may need significant capital financing
requirements and subsidies to promote the economic viability of the operation
in remote areas;
iii)
Building increasingly appropriate port area facilities that require substantial port
investment in new infrastructure and equipment in order to realize the potential
economies of scale available in the transport of cargoes;
iv)
Developing integrated transport chains and hinterland transport infrastructure
will reduce trans-shipment costs such that it may be preferable for a shipper to
use freight trucks to reach target markets directly;
v)
Adoption of an economic subsidy support system under the supervision of the
local RRFN Regulator in the duration of the developmental stage of the RRFN
until full privatization is attained.
The Road Network-RORO Ferry System in Norway is a good model, which the Philippines
might want to use. The Norway model system operates as follows: Statens Vegvessen (SVV)
manages the road network ferry system (Road Ferry Operation) in Norway for the national roads,
the provincial governments for the provincial roads and the local government units for the
municipal roads.
SVV is responsible for more than 100 ferry connections. These are serviced by more than
150 RORO ferries owned and operated by 20 private companies. For political and practical
purposes, each and every ferry connections are regarded as forming part of the road. There is a
distinction however under the Road Act that ferries are not included as part of the road but is
covered by the Transport Act, which falls under the rules for passenger vessels in domestic service.
There are very few road ferry connections that are commercially viable and thus most are dependent
on the financial support provided by the government.
How the Road Ferry Operation operates is described as follows:
i)
ii)
iii)
iv)
Ferries operate under a contract between SVV and the individual ferry
companies
SVV approves all investments in ferries and equipment
Ferry franchises are normally for 10 years (minimum of 5 years) and awarded
through public bidding; awarded companies received a negotiated amount of
money annually as its revenues while operational costs are for the account of the
operators
SVV has the responsibility of constructing and maintaining the ferry terminals;
in this case SVV does not charge anything from the ferry operators
95
v)
vi)
vii)
viii)
ix)
At times, SVV leases the ferry terminal from the local port authority, in which
case the ferry operators pay tolls for cars and passengers to the leasing authority
Travelers pay according to a nationwide rate and fare regulation
Fares set for vehicles (cars, trucks, buses) is the cost of driving the same distance
on land as the ferry crossing plus 40% (other cost elements are sometimes
added)
Ferry rates are set per kilometer and may be subject to discounts as in the case of
prepayment of tickets
SVV decides on the standards involving frequency and size of ferries on the basis
of expected volume of cars and passengers; for local connections ferries normally
operate for 15-hours and 18-hours for the main connections with scheduled
departures every 30 minutes
J. RRFN Regulator
There are two problems that arise in the adoption of the Norway model. First, common
carrier in coastal waterway services bear much higher fixed costs and may lead to the abandonment
of the route in favor of more profitable route, thus adversely contravening the very purpose of the
program. Second, because of economies of scale, endeavoring to cover total costs may lead to a
divergence between price and marginal cost. This problem is most marked in the case of
infrastructure costs, if charged for, particularly where certain services regularly have spare capacity in
order to meet peak demand or maintain service quality.
There are three possible solutions to the problems of the RORO operator:
i)
ii)
iii)
The operator could base prices on marginal cost, with the resulting deficit being
financed by government subsidy though this is unlikely under current economic
condition, but may be justified to compensate for the economic development of
the area. In this cast, the government needs to be able to estimate the volumes
and corresponding marginal costs conforming to the optimal allocation of traffic
in order to determine the appropriate subsidy. If it does not do so, then it will
revert to deficit financing with no real ability to exert financial discipline on the
operator. The financial deficit will have to be met either by taxation or by
diverting other forms of government expenditures. The opportunity cost of this
expenditure will need to be assessed RRFN system will need to be evaluated
using social cost-benefit analysis.
The operator could base prices on average cost, but this could only be sustained
with a degree of protection from other modes. In this case, the government will
need to be involved in the day-to-day administration of the freight service and
will have to employ arbitrary methods to allocate vessels to traffic and to
establish priorities. Again, investment in the waterway system will need to be
evaluated using social cost-benefit analysis.
The operator may seek to discriminate between traffic flows according to the
shippers willingness to pay in order to cover the difference between average and
marginal cost.
This approach largely eliminates the regulatory role of
government. This is because the allocation of freight is determined by the
market and long-term planning and investment can be made on the grounds of
96
97
DPWH also functions as the engineering and construction arm of the Government tasked
to continuously develop its technology for the purpose of ensuring the safety of all infrastructure
facilities and securing for all public works and highways the highest efficiency and quality in
construction. It is also responsible for the planning, design, construction and maintenance of
infrastructure, especially the national highways, flood control and water resources development
system, and other public works in accordance with national development objectives.
Its role is to efficiently maintain and manage quality infrastructure facilities and services in
accordance with appropriate international standards through optimized use of resources and
technology, responsive to the needs and aspirations of the Filipino people, in pursuit of the
National development objectives of Philippines 2000 and beyond. Its vision, on the other hand, is
to become a model agency in the infrastructure development of the country. It is a strong partner
in strengthening the national economy and improving the life of every Filipino.
Part of its mandate is to plan, design, and construct infrastructure that will help alleviate
poverty and develop the countryside. This is very appropriate because the SLDP needs their support
have access roads to the ports that are part of the RRTS. For the constructed vessels of RORO to
be useful, there must me an adequate road system that will transport the goods from the farms to
the ports. The role of the DPWH in constructing this road system is vital because it is the first step
in the efficient and cheap way of transporting goods.
3. Department of Agriculture (DA)
The Department of Agriculture (DA) is the principal agency of the Philippine government
responsible for the promotion of agricultural development growth. In pursuit of this, it provides the
policy framework, helps direct public investments, and in partnership with local government units
(LGUs) provides the support services necessary to make agriculture and agri-based enterprises
profitable and to help spread the benefits of development to the poor, particularly those in rural
areas. Its main contribution to the development of the SLDP program is to assist in post harvest
operations. It can begin by assisting the small farmers and producers in taking take of their produce
right after harvest and before they are shipped out to the other parts of the country.
This role is fulfilled by their Republic Act 8435, otherwise known as the Agriculture and
Fisheries Modernization Act (AFMA), aims to strengthen the agriculture and fishery sectors
through modernization, greater participation of small-holders (or small stakeholders), food security
and food self-sufficiency, private sector participation and people empowerment. Ginintuang
Masaganang Ani (GMA) (Makapagpabagong Programa Tungo sa Masagana at Maunlad na
Agrikultura at Pangisdaan) will be the banner program for agricultural development, a transitional
blueprint for putting AFMA to work. As such, it will focus on achieving food security and poverty
alleviation, with the LGUs (local government units) and other stakeholders developing their own
plans and programs suitable to their respective localities. Such plans and programs should be able to
ensure food security by increasing productivity in irrigated areas, while addressing poverty
alleviation by providing support to marginal areas to empower those who have the least.
The program envisions a modernized and productive agriculture and fishery sector, being
able to provide food at prices affordable to all, especially the marginalized sectors, which will
eventually be empowered as the benefit from responsive support services provided them. To attain
security and competitive self-sufficiency in rice, the agriculture sector should modernize
98
productivity in corn and other feed crops, promote diversification in resource-poor; lowland and
upland ecosystems without access to irrigation, promote livestock enterprise development, and
foster the recovery and eventual growth of the fisheries sector through stratified targeting; this
way, interventions that will be introduced will be more responsive to farmer' needs.
The immediate concern is to specifically address direct investments in support of the
following: protection and development of watersheds; proper management of agricultural land and
water resources; establishments and rehabilitation of irrigation systems; providing marginalized
sectors preferential access to productive assets; and providing other essential measures and support
services. Providing affordable, available, adequate and accessible food supplies at all times is of
course, paramount.
4. Department of Finance (DOF)
The Department of Finance (DOF) is needed in the SLDP project to help fund sourcing.
Part of its mission is to mobilize of adequate resources on most advantageous terms to meet
budgetary requirements and a strong economic growth with equity and productivity. The present
budget need not be changed to accommodate its role in the SLDP. What is needed is its
cooperation and willingness to extend loans and/or assistance to producers and farmers in the
production of their goods. They also need the DOFs help in proposing programs that will
supplement the loans that the DBP is offering to interested investors.
5. Landbank of the Philippines (LBP)
As a Government Universal Bank, LBP shall be a dominant financial institution in the
countryside leading the nation to economic prosperity. As a partner for the SLDP program, the
land Bank of the Philippines is needed to co-finance post harvest facilities and to finance agricultural
production. Much similar to the role of the Department of Agriculture, they are needed to finance
both the production of agricultural products and to assist in its handling right after harvest. This
role is important because without the help to the producers, there will be no goods to transport
using the RRFN. Post production assistance is also required because the goods need to stay fresh
and of quality before they reach their ports and be shipped out into the different markets.
6. Department of Environment and Natural Resources (DENR)
The DENR is the primary government agency responsible for the conservation,
management, development and proper use of the countrys environment and natural resources,
including those in reservations, watershed areas and lands of the public domain, as well as the
licensing and regulation of all natural resources utilization as may be provided by law in order to
ensure equitable sharing of the benefits derived there from for the welfare of the present and future
generations of Filipinos.
As provided for under Section 4 of E.O. 192, the DENR is mandated to be the primary
government agency responsible for the conservation, management, development and proper use of
the countrys environment and natural resources, including those in reservations, watershed areas
and lands of the public domain, as well as the licensing and regulation of all natural resources
utilization as may be provided by law in order to ensure equitable sharing of the benefits derived
there from for the welfare of the present and future generations of Filipinos.
99
The DENRs mission is to be the dynamic force behind peoples initiatives in the
protection, conservation, development and management of the environment through strategic
alliances and partnerships, participate in processes, relevant policies and programs and appropriate
information technology towards sustainable development.
The DENR can help in the operations of the SLDP by facilitating environmental clearances
needed by the RRTS. Before the RRTS can fully operate, it must secure licenses and certain
clearances to ensure that its operation will not disrupt the local wildlife where it is operating in.
Although the RRTS is unlikely to negatively affect the wildlife of the rural areas, the cooperation of
the DENR is needed to assure that all clearances will be issued on time and without much difficulty.
7. Department of Trade and Industry (DTI)
The Department of Trade and Industry (DTI) aims to serve the needs of both business and
consumers. Specifically, its services are aimed at creating a business-friendly environment that
promotes and facilitates the growth of investments, trade and industry in the country. At the same
time, by promoting competition and enforcing fair trade laws, DTI protects the welfare of
consumers and enables them to get value for their money.
L. Present condition of RRNF
The SLDP continues to be aligned with the governments top priorities of building the
Strong Republic Nautical Highway through its three components, the RRFN, Cold Chain, and
Bulk Grains Highway. Under the RRFN, DBP has released P1.25 billion in loans for the purchase
and upgrade of eight shipping vessels to serve the Ozamiz Mukas, Lucena Marinduque,
Batangas Calapan, Cagayan Cebu, and Mindanao Luzon routes. In addition, loans
amounting to a total of Php275.2 million have been approved for the acquisition of three shipping
vessels to serve the Real Polilo, Tabuelan, Escalante and Quezon Aurora Isabela Cagayan
routes, RORO terminal port development, and the development of a multi-purpose port.
Under the cold chain highway component 19 projects amounting to P568.3 million have
been approved for financing. These involve ice plants, seafood processing, cold storage facilities, tin
can manufacturing, meat processing, fruit juice manufacturing, and fish food processing located in
Cagayan de Oro, Iloilo, General Santos, Zamboanga, Tagbilaran, Pateros, Davao City, Bulacan,
Ilocos Norte, Pagadian, and Dagupan.
Under the Grains Bulk Highway, loan approvals have reached P460 million for 74 projects
involving grain processing, rice milling, noodles production, coconut oil manufacturing, feed
milling, corn processing, and palay trading. These projects are located in Zamboanga del Sur,
Ilocos Norte, Davao, Bulacan, Oriental Mindoro, Cotabato, Occidental Mindoro, Isabela,
Batangas, Surigao and Tagum.
M. Assessment of SLDP
The SLDP started in December 1999 as an ODA fund provided by JBIC for 19.999 billion
Yen. The project was a five year plan to provide for a comprehensive and integrated transport as
well as related infrastructure and support services. It is a program, which is anchored on the
understanding that freight transport demand is derived from economic activities that are expected
100
to grow in the future; and in improving the efficiency in the various sectors of the distribution of
goods and services in the country.
However, after five years, the fund provided by JBIC has yet to be fully disbursed due to
different reasons. As such the program was extended until December 2007. The following reasons
were cited for DBPs failure to exhaust the fund:
1. Appreciation of Yen vis--vis Philippine Peso, which increased the total budget
denominated in Pesos.
The appreciation of the Japanese Yen vis--vis Philippine Peso in a way has helped increase
the budget being exhausted by DBP. This can increase the number of firms which can borrow
using the SLDP project.
2. Postponement of projects not yet fully committed, due to the risk associated with
the volatile exchange rate.
This reason is the downside of the effect brought about by the appreciation of the Yen vis-vis Philippine Peso. The volatile exchange rate has forced firms not to fully commit to the loans as
this might prove to be detrimental to the company. There were a number of cases where DBP has
already approved a loan for a company only to be withdrawn due to the risk associated with the
volatility of the exchange rate.
3. Increased cost of imported goods, due to the depreciation of Philippine Peso
which dampened the enthusiasm of businessmen and firms.
Most of the process involved in SLDP has a direct effect on the cost of importation. Firms
often cite increasing cost of importation as a cause of concern for them thus, decreasing chances of
firms applying for loans.
4. Uncertain political situation.
The period when the SLDP started coincided with the political uncertainty in the country.
This was the time when former President Joseph Estrada was impeached and eventually ousted in
office. This created political uncertainty as to the legitimacy of the Arroyo administration. This
lead to capital outflow and eventually decline in investor confidence
5. More prudent loan approval standards by DBP to safeguard portfolio quality from
further degradation.
Another reason for the inability to fully exhaust the fund promptly was due to the more
prudent standards set by DBP to ensure portfolio quality. Also, DBP uses the 80%-20% loan equity
ratio to ensure that those who borrow have the capability to pay the loan.
To attest to its very prudent standards is the fact that as of January 2005, there are 36
pending applications and about 22 prospective applications to the project.
N. Recommendations for the DBP
101
102
could exploit our comparative advantage, such as call centers and other businesses. It also had
enabled the country to be more efficient in production through the various skills and technologies
that were brought by the foreign enterprises. And last, the economic zones had also contributed to
the foreign exchange earnings of the country. This was made possible through the exports and
various capital contributions of the PEZA firms.
However, the establishment of the economic zones had its own set of disadvantages. First,
Filipino employees were often exploited, especially those that were working in the production lines
of the manufacturing sector (Yu, 2004). As discussed in the previous chapters, some Filipino
workers were working in health-hazard, low income, and long hour type of jobs, due to the
permission of the government to contractualize employees. Second, the government had to
forego millions in foregone revenues in order to provide the many generous incentives that were
being granted to foreign investors. According to a study conducted by the Philippine Institute of
Development Studies (PIDS), the foregone revenue from fiscal incentives reached to $3.22 billion
for the period 1998-2000 only (Yu, 2004) This figure did not even include the exemption from
taxes and duties on the importation of inputs, such as raw materials and machineries, export taxes,
and costs of infrastructures. Third, aside from the cheap labor that the country offered to the
foreign investors, some PEZA firms also benefit from the absence of any government ecological
protection measure. According to Hipolito and Reyes (1990), environmental groups in Leyte had
demanded the closure of the Leyte Industrial Developmental Estate for being hazardous to the
health of its employees and the nearby residents. Toxic wastes were reported to come from three
companies operating in the zones: the Philippine Associated Smelting and Refining Corporation,
the Lepanto Mining Company, and Philphos (a fertilizer manufacturing company).
Truly, the government cannot remove the economic zones in order to prevent such
disadvantages, since it would cost the Filipinos their employment. What the government could do
was the strict monitoring of the PEZA firms operations and the implementation of the law, such as
the labor code and environmental laws by PEZA, in cooperation with the appropriate government
agency. For example, PEZA, together with the Department of Labor and Employment (DOLE),
should ensure that the laborers rights were observed, such as humane labor environment and they
were proper compensation would be met. On the other hand, with the cooperation of the
Department of Environment and Natural Resources (DENR), PEZA would be able to monitor the
environmental impacts of the operations of PEZA-registered firms, and then impose fines if the
situation called for such action.
In the end, the government has to study the benefits and costs of operating export
processing zones, and eventually make necessary adjustments to address the said problems in the
operation of PEZA firms in order to protect the interests of the different stakeholders of PEZA.
CITEM on the other hand is an agency attached to the Department of Trade and Industry
(DTI) whose role is to promote Philippine products through promotion activities. These
promotion activities were designed to improve the government export programs and establish a
high-quality standard reputation of Philippine-made products and services. Similar to other
developing countries in South East Asia, the Philippines is determined to provide export promotion
services as part of its export-oriented growth strategy especially in these times where the countrys
trade performance is challenged by a negative trade balance.
103
104
main components of SLDP are the Bulk Grains Highway, Cold Chain and the RORO Ferry
Network (RRFN).
The basic idea of the SLDP is to replace traditional and inefficient storage, handling,
transport and support systems and replace them with the introduction of modern storage handling
and transport system under proper quality control management. It aims to minimize
wastage/spoilage, lower freight and handling costs per unit of cargo, provide adequate ports,
practice Just-In-Time loading and delivery of cargo, and assure safety in transport. All of these
objectives have one major goal of lowering transport costs with the effect of lowering the goods
prices for the end-consumers.
The SLDP budget (19.999 billion Yen) primarily comes from the Japan Bank for
International Construction (JBIC) as an Official Development Assistance (ODA) fund. Although
the SLDP program is a key ingredient to the development of rural areas through integrated
transport and infrastructure and support services, it has not been successful in generating a lot of
investors into the program. In fact the budget was not fully disbursed at the end of the five year
program. This was the reason why DBP had to ask for an extension of three more years to fully
disburse the fund. As of January 2005, a total of P3, 037,598,000 billion worth of loans has been
approved. The breakdown is as follows: P1.627 billion (11 accounts) for RRFN, P696 million
(110 accounts) for Grains Highway and P714 million (25 accounts) for Cold Chain.
The
approved loans were equivalent to only about 30% of the whole fund. Several factors were cited for
this are: (a) Appreciation of Yen vis--vis Philippine Peso, (b) Postponement of projects not yet fully
committed, (c) Increased cost of imported goods, (d) Uncertain political situation and (e) More
prudent loan approval standards by DBP.
Most of the problems mentioned seem to be more of a macro problem. Most of the
problems are not due to DBP inabilities but associated with the problems of the economy. Thus,
unless government does something about these problems, the SLDP project which was envisioned
to address the needs of the logistics and distribution of goods and services, a noble program such as
the SLDP might just go to waste.
105
References
Aggarwal, Aradhna. (n.d.). Performance of Export Processing Zones: A Comparative Analysis of
India, Sri Lanka, and Bangladesh. Retrived February 3, 2005 from
http://www.saneinetwork.net/pdf/SANEI_II/Exports_and_EconomicGrowth_in_South%
20Asia.pdf
AusTrade (2000). Why Australia needs Exports: The Economic Case for Exporting. The Australian
Trade Commission.
Bernard, A. and Jensen, J. (1999). Exceptional Exporter Performance: Cause, Effect or Both?
Journal of International Economics, vol. 47.
Boston Consultancy Group (2004). Export Development and Promotion: Lessons from Four
Benchmark Countries. New Zealand.
Bureau of Export Trade and Promotion.
Carlin, W. (2001). Export market performance of OECD countries: an empirical examination of
the role of cost competitiveness. The Economic Journal vol. III.
Chamber of Automotive Manufacturers in the Philippines, Inc.
Cling, J & Letilly G. (2001). Export Processsing Zones: A Threatened Instrument for Global
Economy Insertion?. Retrieved February 18, 2005 from
http://www.dial.prd.fr/dial_publications/PDF/Doc_travail/2001-17.pdf
Commission on Audit (2003). Annual Audit Report for the Center for International Trade Exports
and Missions.
Czinkota, M (2002). National Export Promotion: A Statement of Issues, Changes, and
Opportunities. In Kotabe, M and Aulakh P (eds), Emerging Issues in International Business
Research, Edward Elgar, Cheltenham UK, Northampton MA
Danish Trade Council (2003). Objectives and Strategy for the Danish Trade Council, 2003-2005.
Del Rosario, J. T. (1997). Foreign Investment: The Path To Prosperity?. IBON Facts & Figures,
20(14), pp. 1-7.
Deltete, C. A. (1989). A Basic Research on CITEMs Effectiveness in fulfilling its Trade Promotion
task for the Government and Export Industry. Unpublished undergraduate thesis. De La
Salle University - Manila.
GAO, (1995). Export Promotion Rationales For and Against Government Programs and
Expenditure. GAO/T-9CD-95-169, US General Accounting Office, Washington DC.
Gencturk, E and Kotabe, M (2001). The Effect of Export Assistance Program Usage on Export
Performance: A Contingency Explanation. Journal of International Marketing Vol. 9 No. 1.
Girma, S. (2002). Entry to Export Markets and Productivity: A Micro-economic Analysis of
Matched Firms. Leverhulme Centre for Research on Globalization and Economic Policy,
Nottingham University, Nottingham
Government of Denmark (2002). The Danish Growth Strategy. The Danish Government,
Copenhagen.
Hipolito R., & Reyes, K. (1990). Industrial Estates: A Lure for Development?. IBON Facts &
Figures, 13(23), pp. 1-11.
International Labour Organization. (n.d.). Export Processing Zones: Addressing the Social and
Labour Issues. International Labour Organization. Retrieved February 8, 2005 from
http://www.transnationale.org/pays/epz.htm
ITC UNCTAD/WTO (1998). Trade Promotion Strategy in Developing Countries: A Guide to
Key Issues. International Trade Centre UNCTAD/WTO, Geneva
ITC UNCTAD/WTO (2000), Executive Forum 1999. Redefining Trade Promotion: The Need
for a Strategic Response, International Trade Centre UNCTAD/WTO, Geneva.
106
ITC UNCTAD/WTO (2001), Executive Forum 2001: Is Your Trade Support Network Working,
International Trade Centre UNCTAD/WTO, Geneva
International Trade Institute of Southern Africa (2002). Cape Trade Promotion Organization
Project: Initial Investigations Report. Western Cape Provincial Government.
Knight, J. and McNaughton, R. (2003). Satisfaction with Paying for Government Export
Assistance. Macmillan, New York.
Knuckey, S., Johnston, H. and Campbell-Hunt, C. (2002). A Study of New Zealand Business
Practices and Performance. Ministry of Economic Development, Wellington.
Kokko, A. (2002). Export-Led Growth in East Asia: Lessons for Europes Transition Economies.
National Europe Centre Paper No.31, Australian National University, Canberra
Kusago, T. & Tzannatos, Z. (1998). Export Processing Zones: A Review in Need of Update.
Retrieved February 3, 2005 from
http://wbln0018.worldbank.org/HDNet/hddocs.nsf/0/d272d73aff15c730852567d100
713bed/$FILE/9802.pdf
Laird, S. (1997). WTO Rules and Good Practice on Export Policy. Staff Working Paper
TPRD9701, World Trade Organization, Geneva
Lim, M. (1991). CITEM: A Case Study. Unpublished undergraduate thesis. University of the
Philipppines. Quezon City.
Madani, D. (n.d.). A Review of the Role and Impact of Export Processing Zones. Retrieved
February 18, 2005 from http://econ.worldbank.org/docs/965.pdf
Mendoza, A. (1995). No Mere change of Names: PEZA IS EPZA, only More So. Philippine
Political Monitor, pp. 7-13.
Nega, B. (2002). Sources and Uses of Export Services in Ethiopia. Ethiopian Economic Policy
Research Institute. Working Paper No. 2 Series 2002.
Pain, N. and Wakelin K. (1998). Export Performance and the Role of Foreign Direct Investment.
Paper 131, National Institute of Economic and Social Research, London
Philippine Economic Zone Authority. (2001). PEZA. Manila, Philippines.
Philippine Economic Zone Authority. (n.d.). Rules and Regulations to Implement Republic Act
No. 7916. Manila, Philippines
Philippine Economic Zone Authority. (n.d.) The Special Economic Zone Act of 1995. Manila,
Philippines.
Potter, J. and Spires, R. (2002). The Wider Effects of inward Foreign Direct Investment in
Manufacturing on UK Industry. Journal of Economic Geography, vol. 2.
Rosello, R. (1989). Industrialization. IBON Facts & Figures, 12(22), pp. 1-11.
Schwellnus, C. (n.d.) Export Processing Zones: Economic Effects and Poverty Impact. Retrieved
February 3, 2005 from
http://www.iue.it/Personal/Researchers/cschwellnus/index_files/adb_paper.pdf
Seringhaus, F.H.R. and P.J. Rosson (1998). Management and Performance of International Trade
Fair Exhibitors: Government Stands Vs Independent Stands. International Marketing
Review Vol. 15 No. 5.
Seyoum, B. (2004). The Role of Factor Conditions in High-Technology Exports: An Empirical
Examination. Journal of High Technology Management Research vol 15.
th
Todaro, M. & Smith, S. (2003). Economic Development (8 Ed.). United Kingdom: Pearson
Education Limited.
Yu, J. S. (2004). EPZ and Industrialization. IBON Facts & Figures, 27(3 & 4), pp. 1-13.
RP Manufacturing: The Deepening Crisis of Domestic Capital. (2001). IBON Facts & Figures,
24 (17 & 18), pp.1-15.
107
108